Cushion adhesive tapes

Transcription

1

2 Cushion adhesive tapes BS MOUNT Product thickness 0,55 mm (22 mil) Application thickness 0,50 mm (20 mil) High Screens, shades, lines and fine types Yellow foam Available in 6 compressibility grades Medium-high with prevailing screens, shades and fine types Red foam Medium with balance among screens, lines and solids White foam Medium-low with prevailing solids and lines Green foam Low Full solids print Grey foam Very low Full solids print, more intense colors Blue foam 2

3 15 Product thickness 0,41 mm (16 mil) Application thickness 0,38 mm (15 mil) Available in 3 compressibility grades Medium-high with prevailing screens, shades and fine types Pink foam Medium with balance between screens and solids Orange foam Available from september 2016 Medium-low with prevailing solids and lines Very low Full solids print Lilac foam 3

4 Technical features BS MOUNT Compression test 0,50 mm (20 mil) kpa Force N/cm % Deformation Compression test 0,38 mm (15 mil) kpa Force N/cm % Deformation

5 Available ranges Product LA PLUS PLATINUM US TT TPS BS MOUNT BS MOUNT BS MOUNT BS MOUNT BS MOUNT BS MOUNT BS MOUNT BS MOUNT BS MOUNT Carrier color Available carriers Transparent Liner Type LA PLUS PLATINUM US TT TPS Reinforced PE foam Products available upon request Available liners Type LA PLUS PLATINUM US TT TPS Pattern Pebbled Adhesion performance Side LA PLUS PLATINUM US TT TPS Closed side (Plate side) Open side (Sleeve side) Adhesion shown refers to the general performance of the product during application and not to Peel Adhesion values Rubber based adhesive Acrylic adhesive 5

6 Why choose BS MOUNT HANDLING Easy to HANDLE: Different mass color foam for easier identification High internal cohesion and double reinforcement for easier removal avoiding delamination CARRIER Effective cushioning system: Exclusive high resilience formula for perfect printing results at very fast high speed Wide range of compressions for more suitable selection and higher printing yield High compression repetition over long periods during extended printing runs ADHESIVE high performance adhesive system: Strong adhesion avoiding tape and plate lifting Clean removal after printing with no adhesive residues LINER Air bubbles repellent liner: Transparent color for easier air-bubbles identification Especially designed structure allow the exit of air bubbles 6

7 The BiesSse group has been operating on the global market for nearly 40 years through the following two distinctive companies, which work in close synergy with one another: BiesSse Tape Solutions S.p.A., for the production and conversion of adhesive tapes. BiesSse Equipment Solutions S.r.l., for the design and production of industrial equipment and related software. The Tape manufacturing unit is located in Sedriano, Milan (Italy). It covers an area of over 11,000 sq.m. and it is equipped with modern and advanced installations, in line with Lean manufacturing practices. The Equipment unit, also located in Sedriano, with its offices and an equipment construction workshop, covers an area of more than 2,000 sq.m. BiesSse is continuously concentrating its efforts on setting up new subsidiaries in strategic areas abroad in order to provide best direct support to its customers. The Company aims at developing advanced solutions to innovate the most challenging industrial processes. BiesSse customers are fully supported in their search for the most effective solution according to their requirements. BiesSse Tape Solutions S.p.A. Via Galvani 2/ Sedriano (Milano) - Italy Phone info.tapes@biessseworld.com Biesse GmbH Lofererstrasse, 56 A-6322 Kirchbichl/Tirol - Austria Phone +43 (0) biesssegmbh@biessseworld.com BiesSse do Brasil LTDA Rua 13 de Maio, Pinhais - PR - Brasil Phone biesssedobrasil@biessseworld.com BiesSse Equipment Solutions S.r.l. Via Cartesio Sedriano (Milano) - Italy Phone info.equipment@biessseworld.com BiesSse Asia Pte Ltd 25 International Business Park #04-60 German Center Singapore Phone biessseasia@biessseworld.com Changzhou BiesSse Tape Technology Co. Ltd Unit 13-A, Yuehai Industrial Park Huange West R388, Xinbei District, Changzhou, Jiangsu, China Phone: biesssechina@biessseworld.com NOTE: All technical data provided in this sample book refer to samples taken from our production. BiesSse recommends to test the products for compliance with specific requirements. Technical data can vary at any time due to technical or production needs. Technical data tolerance:+/-30%. 7

8 8