100% SYNTHETIC and PART SYNTHETIC ENGINE OILS MINERAL OILS

Transcription

1 Product Brief Specifications Main Application Viscosity Packing Code Polaris Energy FS 1120 SAE 5W30 100% SYNTHETIC and PART SYNTHETIC ENGINE OILS Polaris Energy FS (Fully Synthetic) 1120 SAE 5W30 is a 100% SYNTHETIC, advanced technology, FUEL New high performance cars, racing cars 5W30, SAVING passenger car engine oil meeting the specification requirements of API SN/CF, ILSAC GF-5, General Motors Dexos -1, Ford M2C 913 A/B and is blended to meet SAE 5W Polaris FS 1120 SAE 5W40 Polaris FS (Fully Synthetic) 1120 SAE 5W40 is a 100% SYNTHETIC, low emission engine oil meeting MID SAPS requirements. Made to meet the specifications of API SN/SM/CF, ACEA A3/B4-08, Mercedes Benz and 229.5, Volkwagen /505.00, BMW LL-01, Opel GM-LL-B-025, Porsche A-40, Renault RN 710 and 700. Blended to API SAE 5W40 Polaris FS 1120 SAE 10W40 Polaris Energy FS (Fully Synthetic) 1120 SAE 10W40 is an API SN level lubricant and hence is the latest gasoline (petrol) engine specified lubricant in the world. It also meets API CF, Legacy GM Service Fill, Ford and Chrysler Service Fill requirements New high performance cars, racing cars 5W40, New high performance cars, racing cars 10W40, Polaris 1120 MINERAL OILS Polaris 1120 is a high quality Gasoline (Petrol) multigrade engine oil meeting the specification of API SN/CF, Ford WSS M2C945A/946A, Chrysler MS 6395 and Honda, Hyundai, Kia and Mazda requirements For all cars, especially made after W50, 2020 Polaris 1110 Polaris 1110 is a high quality Gasoline (Petrol) multigrade engine oil meeting the specification of API SM/CF, ACEA A3/B4, Mercedes 229.1, Volkswagen /505.00, CID-A-A-52039B, GM 4718M, Ford M2C930-A,H, M2C929-A and Daimler Chrysler MS 6395-N. For all cars made prior to W50, W Polaris 1100 Polaris 1100 is a high quality Gasoline (Petrol) multigrade engine oil meeting the specification of API SL/CF/CF-4, ACEA A2/A3/B2/B3.E2, BMW Special Oil, Mercedes 229.1/228.1, Porsche All Season Oil, JASO 4T MA, Volkswagen 500/501/505 Performance Level 1 Oil and Ford WSS-M2C 153H. For all cars made prior to W50, W Polaris 1090 Polaris 1090 is a high quality Gasoline (Petrol) multigrade engine oil meeting the specification of API SJ/CF, ACEA A3/B3, CCMC G5/PD2, Volkswagen /505.00, BMW, Porsche and Mercedes Benz For all cars made prior to W50, W Polaris 1060 Polaris 1060 is a high quality Gasoline (Petrol) multigrade engine oil meeting the specification of API SF/CD, CCMC G2, PD-1 and U.S.Military 2104B and MIL-l-46152C. Economical oil for all old cars 20W50, W Denebola 1130 DIESEL ENGINE OILS Denebola 1130 is a "Super High Performance Diesel" (SHPD) engine oil providing best performance in high output, high speed diesel engines. Meets the specifications of API CJ-4/CI-4/CI-4 Plus/CF/SM, ACEA E9/E7, For all diesel vehicles made after W40, 2126

2 output, high speed diesel engines. Meets the specifications of API CJ-4/CI-4/CI-4 Plus/CF/SM, ACEA E9/E7, MTU Oil Category 2.1, Caterpillar ECF-3/2/1a, Volvo VDS-4, MB , Deutz DQC III-05, MAN M 75, Cummins CES 20081, Mack EO-O Premium Plus 07, DDC PGOS 93K218, Renault Trucks VI RLD-3, Navistar, Global DHD-1 and JASO DH-2 Debeola FS 1120 Denebola 1120 Denebola FS (Fully Synthetic) 1120 is a "Extra High Performance Diesel" (XHPD) engine oil for all modern diesel engines. Meets the specifications of API CI-4/CF, ACEA E7-08, Mercedes Benz 228.5, Scania LDF-2, MTU Oil Category-3, Cummins 20076/77/78, Deutz DQC III, Caterpillar ECF-1a, Volvo VDS-3, Mack EO-M Plus, MAN M 77, Renault RXD/RLD-2 and SAE 10W40. Denebola 1120 is a "Extra High Performance Diesel" (XHPD) engine oil for use in all moden diesel engines. Meets the sepcifications of API CI-4/SL, Mercedes Benz 228.3, MTU Oil Category 2, Cummins 20076/77/78, Volvo VDS-3, Mack EO-M+, MAN M 75-1, Renault VI RLD-2, Global DHD-1 and Allison C-4 performance For all diesel vehicles made betwee 2002 and 2010 For all diesel vehicles made betwee 2002 and W40, 15W40, Denebola 1110 Denebola 1110 is a Super High Performance Diesel (SHPD) engine oil meeting the specification of API CH- 4/CG-4/CF-4/SJ/SL, ACEA E7-04, Mercedes Benz P 228.2/3, MAN M 75, Volvo VDS-3, MTU/DDC Type 2, Mack EO-M Plus, Cummins CES 20076/76/78, JASO DH-1, US Military MIL-L-2104F and MIL-L-46152E. For all diesel vehicles made betwee 2002 and W40, 1116 Denebola 1100 Denebola 1070 Denebola 1100 is a High Performance Diesel (HPD) engine oil meeting the specification of API CG-4/CF- 4/CF/SL/SJ, ACEA E2/A3/B3, Mercedes Benz 228.3/229.1, Mack EO-M Plus, MTU Oil Category 1, Renault Trucks RGD, Detroit Diesel 93K215, Deutz DQC-1-05, MIL-L-2014E, MIL-L-46152C, MAN 75, Volvo VDS, Saab-Scania Extended Drain and Allison C-4. For all diesel vehicles made betwee 1995 and W40, Denebola 1070 is a high quality heavy duty diesel engine oil meeting the specification of API CF/CF-II/SF, MIL-For all diesel vehicles made prior to , 1101 L-2014D, MIL-L-46152C, Mack EO-K, CCMC D5/PD-1/G2, Daimler Chrysler 227.0/227.1, MAN 270/271, 50 Detroit Diesel 7SE270 and 6V92TA, Caterpillar TO-2 and Allison C W W Turius 3D - New name TOPAZ 2D AUTOMOTIVE SECTION - GEAR, TRANSMISSION AND AUTOMATIC TRANSMISSION FLUIDS Turius 3D, is an Automatic Transmission Fluid meeting the specifications of GM Dexron III, GM 6298M, Ford WSP-M2C185-A, Allison C-4, Fiat , ZF Gears TE-ML 09/14 LEV, Iveco Standard LEV and many others. For all modern automatic transmission systems NA, 2252 Turius 2D - New name TOPAZ 3D Turius 2D, is an automatic transmission fluid meeting the specification requirements of Dexron IID, GM 6137M, Ford M2C 90 10A, Allison C-3, Mercedes Benz 236.7, Fiat , ZF Gears TE-ML-09/11/LEV, Iveco Standard LEV and many others For all modern automatic transmission systems of slighly older systems NA, 1251 Gatria HD Gatria HD (Heavy Duty) is a premium quality gear and transmission oil meeting the specification of API GL-5 and US Military MIL-L-2105D and ZF TE-ML 07. Rear axle and hypoid gear systems of all vehicles 80, W W

3 Gatria Gatria is a premium quality gear and transmission oil meeting the specification of API GL-4 and US Military MIL-L-2105D. Rear axle and hypoid gear systems of all vehicles 80, W W Betria 4000 AUTOMOTIVE SECTION - BRAKE FLUIDS Betria 4000 is a synthetic brake fluid for use in all cars, buses, trucks, tractors and earthmoving equipments. Meets the specifications of F.M.V.S.S. DOT 4,DOT 3, SAE J 1703, ISO 4925,JIS K 2233 Class 4 and VV-B-680B. Brake and clutch systems of all high speed vehicles, 12X1L, 12X0.5L, 12*0.25L 8312 Betria 3000 Betria 3000 is a synthetic brake fluid for use in all cars, buses, trucks, tractors and earthmoving equipments. Meets the specifications of F.M.V.S.S. DOT 3, SAE J 1703 and ISO Brake and clutch systems of all high speed vehicles, 12X1L, 12X0.5L, 12*0.25L 8311 Capella 50 AUTOMOTIVE SECTION - RADIATOR COOLANTS AND ANTIFREEZE Capella 50 is a synthetic based radiator coolant and antifreeze and is 50% concentrated for use in all Radiator coolant and antifreeze - read-to-use radiators (Pre-mixed with 50% high quality water). Meets the specifications of GM 1899M, 6038M, Chrysler having a concentration of 50% - organic - for MS 7170, SAE J 1304, ASTM D 4985, John Deere H24B1/24C1, Cummins 90T8-4, Ford EZE M-97B44-1 and use in all radiators of all vehicles and engines many others. Use chart availble for further dilution, 8302 Capella 33 Capella 33 is a synthetic based radiator coolant and antifreeze and is 33% concentrated for use in all radiators (Pre-mixed with 67% high quality water). Meets the specifications of GM 1899M, 6038M, Chrysler MS 7170, SAE J 1304, ASTM D 4985, John Deere H24B1/24C1, Cummins 90T8-4, Ford EZE M-97B44-1 and many others. Use chart availble for further dilution Radiator coolant and antifreeze - read-to-use having a concentration of 33% - organic - for use in all radiators of all vehicles and engines, 8301 Thuban Thuban HD HYDRAULIC AND TRANSMISSION OILS High performance drive train fluids designed for use in transmissions, final drives and hydraulic systems of Hydraulic systems of all mining, earth moving, earth moving machinery, construction machinery, mining machinery, fork lifts etc., where the manufacturer construction and heavy machinery has specified a fluid meeting Allison C-3 and Caterpillar TO-2 specifications. Also a good engine oil meeting the specifications of API CF. Thuban HD (Heavy Duty) is a top quality power transmissiion fluid meeting the stringent requirements of Caterpillar TO-4, Allison C-4, Dana Powershift, Eaton Vickers EH-1027C, Komatsu KES , Komatsu Dresser, Treme ITTC, ZF TEML 01/03C/07F and API CF and CF-2. A good quality engine oil, too Heavy duty transmission units, wet disc brakes and final drives of caterpillar, Allison, Komatsu, Dresser, Eaton, Dana and other equipments 10W, x5L W, x5L AUTOMOTIVE GREASES

4 Gulfium MP -New name Gadiva MP Gulfium MP (Multi Purpose) is a premium quality, lithium hydroxide based, multipurpose grease suitable for All automobile and industrial general all automotive and industrial applications. Meets specification requirements of SABS and most of applications the engine maker specifications NLGI 2 180Kg, 15 Kg, x1Kg, NLGI x0.5 Kg Gulfium EP - New name Gadiva EP Gulfium EP (Extreme Pressure) is a premium quality, lithium hydroxide based, Extreme Pressure grease suitable for all automotive and industrial applications. Meets specification requirements of SABS and GM 6031M and most of the engine maker specifications All automobile and industrial general applications requiring EP additives - especially heavily loaded applications NLGI 2 180Kg, 15 Kg, x1Kg, NLGI 3 12x0.5 Kg 1637 Rasulus 4000 AUTOMOTIVE SECTION - ZINC FREE ENGINE OILS Rasulus 4000 is a crankcase engine oil which are 'chlorine free:, zinc-free, 13 TBN meeting the specification All diesel engine powered railroad locomotives sof LMOA Generation IV (long-life) category. Meets API CD specifications made by GE, EMD, Caterpillar (not 3600 models), Fairbanks-Morse, Baldwin_lima- Hamilton & Alco Rasulus 5000 Rasulus 5000 engine oils aare 17 TBN, Zinc-free, meeting the highest LMOA Specification of Genration 5. Also meets API CD. All railroad locomotives made by GE, EMD, Caterpillar (not 3600 models), ETC NATURAL GAS ENGINE OILS Nembus 1060 Nembus is a low ash, high performance Gas engine oil, for both four stroke and two stroke engines, providing excellent oxidation and nitration stability. Good for both synthetic and natural gases All engines running on high ammonia synthetic or natural gas engines Merak MARINE ENGINE OILS Merak engine oils are highest quality marine engine oils having different viscosities and TBN numbers. The All marine engines - both 4 stroke and 2 stroke, first two numbers indicate the SAE viscosity grade and the last 2 numbers indicate the TBN of the oil. All oils both truck piston and reciprocating engines. meet the specifications of API CF, CD, MIL-L-2104E. Use the oils as per Engine manufactur recommendations and sulfur in the fuel L Rigel REFRIGERATION OILS A fully napthenic refrigeration compressor oils for use in all air conditioning systems and cooling systems of all engines, meeting the specifications of DIN KC All compressors of all airconditioning and refrigeration machineries running on R-12 and R22 refrigerants

5 HYDRAULIC OILS Hydrobius High quality Antiwear hydraulic oils, meeting the specifications of DIN Part 2 (HLP), AFNOR NFE All industrial hydraulic systesm, transmissions, HM, US Steel 127/136, Cincinnati Milacron P-68/P-69/P-70, Denison HF-0, HF-1, HF-2 and Vickers I-286-S and gear units, compressors, spindles,bearings M 2950-S Grafia Haldus ENCLOSED GEAR OILS Premium quality heavy-duty industrial gear oils developed for lubrication of enclosed gears working udner severe operating conditions. Meets the sepcifications of DIN Part 3, US Steel 224, David Brown S and AGMA Premium quality, very high viscosity index hydraulic oils with low pour points and exceptional antiwear properties. Formulated to meet Poclain P P (Index F) and exceeds the specification requirements of DIN Part 3 HV, AFNOR HV and ZF Gears TE-ML-12 All enclosed industiral gear units operating under shock loading conditions - spur, helical, bevel and worm gears Hydraulic systems working in changing temperature conditions - like hydraulic systems of all earth moving equipments,construction and mining equipments and highly loaded hydraulic systems

6 Tania Corsa TURBINE OILS Premium grade, top quality, corrosion and oxidation inhibited turbine oil for use in power plant steam and gas turbine lubrication. Meets the specifications of BS 489, DIN (L-TD), ISO 6743/0T. Has in excess of 4000 Hours of oxidation life in D 943 test and has an air release value of less than 2 Minutes as per ASTM D 3427 Premium quality, inhibited mineral-oil-type compressor oils for the lubrication of reciprocating air compressors with discharge temperatures of upto 220 deg C. Made to meet the specifications of DIN Group VDL and ISO DIN All steam and gas turbine oils Cylinder and crankcase lubrication of air or inert gas reciprocating compressors operating with high discharge temperatures Heka HEAT TRANSFER FLUIDS High quality paraffinic mineral oils for use in low and medium pressurized closed heat transfer systems with high specific specific heat and thermal conductivity and can be used at bulk tempertures upto 315 deg C All heat transfer systems with bulk temperatures upto 315 deg C and higher, with changes changes L Situla SPINDLE OILS High quality lubricants for the lubrication of high speed spindles used in various machineries in the industry All machine spindles including those used in fabric industry L 16 Wasat SLIDEWAY AND PNUEMATIC TOOL OILS Specially compounded extreme pressure oils for the lubrication of slides and ways, and meeting specifications of Cincinatti Milacron P-47/P-50 specifications. Slideways of all metal working machines and for airdrills L MOULD RELEASE OILS Mira A concrete mould release oil recommended all steel, wooden and other moulds. For all concrete moulds 200L 1676 Propus ROCK DRILL OILS Propus are high quality oils for pneumatic tool lubrication. They are used for airline lubrication of a wide variety of heavy-duty, pneumatically operated equipment, and will enhance the operation of percussion type of rock drills Impact wrenches, rivet hammers, drills, reamers, clinker breakers, wood borers, saws, scaling and chipping tools, hoists L 1686

7 TRANSFORMER AND SWITCHGEAR INSULATING OILS Spica NU (U=Unihibited) High quality, naphthenic, non-inhibited type transformer oil of good oxidation stability, high dielectric Transformers, oil immersed switch gears and strength meeting the specifications of BS 148 Class 1, IEC Class 1 & AS 1767 other insulating applications 200L 1683 Spica NA (A= Inhibited) High quality, naphthenic, Inhibited type transformer oil of good oxidation stability, high dielectric strength meeting the specifications of BS 148 Class 3, IEC Class 3 and Australian Specifications AS 1767 Transformers, oil immersed switch gears and other insulating applications 200L 1684 Rigel REFRIGERATION OILS A fully napthenic refrigeration compressor oils for use in all air conditioning systems and cooling systems of all engines, meeting the specifications of DIN KC All a/c & refrigeration compressors running on R-12/ R22 refrigerants INDUSTRIAL GREASES Gulfium Moly EP - New name Gadiva Moly EP Moly EP grease is an excellent quality multipurpose lithium based grease containing 3.5% Molybdenum disulfide. Available in NLGI 2 and 3 grades, it can be used for temperature range of -25 to +130 degc. Best for all heavily loaded applications where shock load conditions prevail Shackle pins, steering parts like ball joints, suspension units, and other shock-loaded parts like trucks, trailers, construction equipments NLGI 2 180Kg, 15 Kg, 1642 NLGI Gulfium HT - New name Gadiva HT Gulfium HT (High Temperature) grease are a range of clay-thickened grease recommended for temperature range of -20 to +130 deg C. Recommended for all extremely high tempertaure applications All high temperature applications like cement mills, ovens, oven-chains, steel machineries, etc NLGI 2 180Kg, 15 Kg, 1648 NLGI Gulfium LICO - New name Gadiva LICO Gulfium LICO (Lithium Complex) greases are a range of premium quality multipurpose grease recommended for temperature range of -30 to +150 deg C. Recommended for an extensive array of automotive and industrial applications, particularly suitable for high temperatures and severe working conditions All severely loaded and extreme temperature applications found both in industrial and automotive applications NLGI 2 180Kg, 15 Kg, 1650 NLGI Grafia PG Grafia PA SYNTHETIC GEAR OILS - POLY ALKYLENE GLYCOL BASED 100% synthetic polyaklylene glycol based industrial gear oils meeting the specifications of David Brown Type Industrial worm gear units, auxilliary worm G, Foden Rear Axles and Kirkstall Work Gears drives on automtotive and industrial equipments SYNTHETIC GEAR OILS - POLY ALFA OLEFIN BASED 100% synthetic Polyalfa olefin based industrial and automotive gear oils meeting the specifications of ISO Lubrication of all kinds of gears working under Enclosed Gears of Category CKD, DIN Part 3 Lubricating Oils CLP AGMA 9005-E02 Extreme extremely loaded conditions and at extreme

8 Hydrobius SYN Corsa SYN Solcut Enclosed Gears of Category CKD, DIN Part 3 Lubricating Oils CLP AGMA 9005-E02 Extreme Pressure Gear Lubricants, AIST (US Steel) Requirements No. 224 Lead Free EP Gear Oil, David Brown S (E) extremely loaded conditions and at extreme temperatures SYNTHETIC HYDRAULIC OILS - POLY ALFA OLEFIN BASED 100% synthetic, PAO based, premium quality hydraulic fluids for all hydraulic systems operating under All kinds of hydraulic systems, pumps and extremely severe conditons. Meets the specifications of DIN Part 2, AFNOR NFR 48603HM and lightly loaded gear units requirments of most pump manufacturers including Cincinnati Milacron, Vickers, Denison and others SYNTHETIC COMPRESSOR OILS 100% synthetic, high performance, compressor oils based on Poly Alfa Olefin. Designed to meet the specifications of DIN Part 2, DIN VDL, DIN Part 3, Atlas Copco and many other compressor maker requirements CUTTING FLUIDS A specially compounded emulsifying cutting oil incorporating special biocideds to increase coolant life. Meets the specification requirements of IS 1115, DEF STAN 91023/1 (Grade ZX-1). All compressors, except for breathing air Used at 1:10 to 1:60 ratios, used for more difficult jobs for free machining tools Syncut A 100% synthetic coolant and is a blend of chemcials and water that contains NO petroleum fluids. To be used at a dilution of 1:15 to 1:75 for various applications Drilling, taping, light to heavy turning, milling, heavy grinding etc DEGREASERS Diadem Orange This special ORANGE formula is highly concentrated to save money. It cuts through grease, oils and resins quickly and easily. It is powerful enough to clean commercial exhaust filters, but also gentle enough to use on your laundry. Perfect for every cleaning job with just the right dilution, from driveways to machinery, to stoves, barbecues, carpets, even walls and tile. Automobile workshops, industrial sheds, driveways, machinery, stoves, barbecues, carpts, walls, tiles, restaurant oil traps, 4x5L 8001