NORTH ISLAND 322 Rosedale Road, Albany, Auckland PH: FAX:

Transcription

1 Irrigation Price List October 2011 CONTACT LIST.. NORTH ISLAND 322 Rosedale Road, Albany, Auckland PH: FAX: David Pearce Irrigation Division Manager DDI Mobile david.pearce@parkland.co.nz Morgan Rickwood Purchasing & Sales Admin DDI morgan.rickwood@parkland.co.nz Damien Walsh Irrigation Sales Engineer DDI Mobile damien.walsh@parkland.co.nz Selwyn Matthews Irrigation Service Manager Mobile selwyn.matthews@parkland.co.nz Mark Andrews Irrigation Service Engineer Mobile mark.andrews@parkland.co.nz Rob Baxter Irrigation Service Engineer Mobile rob.baxter@parkland.co.nz SOUTH ISLAND 455 Blenheim Road, Christchurch PH: FAX: Peter Gant Irrigation Manager DDI South Island Mobile peter.gant@parkland.co.nz Ken Beaumont Irrigation Service Engineer DDI Mobile ken.beaumont@parkland.co.nz Richard Prosser Irrigation Sales Engineer DDI Mobile richard.prosser@parkland.co.nz

2 1 Trading Terms and Conditions Detailed Trading Terms and Conditions are covered by a separate Trading Agreement. 2 Pricing The prices quoted in this price list may be amended from time to time. Prices charged for goods will be according to a current quotation. Parkland will endeavour to notify buyers of price changes, but there is no liability in this regard. Prices exclude insurances, packaging, delivery and GST. 3 Delivery and Packaging Unless otherwise agreed, goods sold to the buyer will be supplied ex Parkland s Auckland warehouse. Goods, (other than those back ordered) will be dispatched within 2 working days of receipt of an order. 4 Freight Unless specified, goods will be dispatched via a standard parcel service. Overnight courier service is available on request at the buyers expense. All orders will be subject to a freight, packaging and handling charge. 5 Orders and Performance The company may accept or refuse any order for goods at its absolute discretion. 6 Minimum Orders The minimum order the company will accept is $125 (net of discounts, if any, and before good & services tax). The company reserves the right to refuse smaller orders, or alternatively to apply a surcharge of $20. 7 Warranty Procedures Products are guaranteed to be free from defects in material and workmanship. Our obligation under this guarantee is limited to the repair or replacement of the product, at our option. Warranty period may vary between 1and 5 years depending on the product purchased. Product returned for warranty must clearly state the name of the purchaser, the date it was purchased, or installed, and the nature of the fault. 8 Returned Goods Only normal stocking items will be accepted for return. Items can only be accepted when returned within 15 days from the date on the packing slip. Goods must be in re-saleable condition, i.e. clean, complete and un-used. Any goods returned for credit must be accompanied by a copy of the original invoice. Failure to include this information may result in processing delays. Unless goods are returned as a consequence of error by Parkland Products, a 10% Return Goods Charge will be applied. The company will use its best endeavours to fulfil accepted orders and comply with any requested date for delivery, but time will not be of the essence in this regard. Parkland, at its absolute discretion, may extend the date for delivery or cancel the order without liability. Changes in specification and performance date for any item may be made by Parkland without notice and without incurring liability to the buyer.

3 Irrigation Price List Effective October 2011 Contents SECTION 1 - SPRINKLERS 1-18 SECTION 2 - VALVES Spray Heads & Sprinklers Solenoid Valves Toro LPS Spray Head 1 Toro EZ-Flow Plus Valves 19 Toro 570 Spray Head 1,2 Richdel Valves 19 Toro Precision Series and 570 Nozzles 2-5 Irritrol Ultra-Flow Valves 19 Irritrol I-Pro Spray Heads 6 Irritrol Century Series Solenoid Valves 20 Irritrol Nozzles 6 Toro P220 Series Solenoid Valves 20 Irritrol Waterbird Low Pressure Spray 6 Toro/Irritrol Pressure Regulators 20 Toro 500 Series Bubblers 6 Mini Barb Solenoid Valves 20 Toro Mini8 Rotor 7 Valve Repair Kits 19,20 Toro Super800 Rotor 7 Toro T5 Rotor 7 Manual Isolation Valves 21 Toro IMPOP Impact Sprinkler 7 Toro T7 Rotor 8 Other Valves Irritrol Platinum Sport Rotor 8 Check Valves 22 Toro 640 Sprinkler 8 Norval Foot Valves 22 Toro TS90 Sports Rotor 8 Air Release and Vacuum Valves 22 Toro TG101 Large Turf Gun 8 Quick Coupling Valves 23 Toro 300 and S700 Rotors 9 Pressure Gauges and Adaptors 23 Toro Golf Sprinklers Valve Boxes 24 Toro 810G Series Sprinklers 10 Toro 720 Series Sprinklers 10 Valve Manifold Fittings 25 Toro B Series Sprinklers 10 Toro DT Series Sprinklers 10,11 SECTION 3 - CONTROLLERS & ELECTRICAL Toro 835/855 Series Sprinklers 11 Toro DT Conversion Assemblies and Bodies 12 Automatic Controllers Toro 800S Conversion Assemblies and Bodies 12 Toro Tap Timer and Battery Controllers 26 Toro DDC Series Controllers 26 Travelling Irrigators GW25/GW40 13 Toro TMC Toro TMC Toro Service Tools & Accessories 14 Toro TDC Decoder Controller 27 Irritrol Kwik-Dial and Raindial Controllers 27 Impact Sprinklers Irritrol Total Control and MC Plus Controllers 27 Plastic Full & Part Circle Sprinklers 15 Irritrol MC E Series 27 Metal/Brass Full Circle Sprinklers 15,16 Heron Multi Wire and Decoder Controllers 28 Sprinkler Bases 16 Heron Central Software 28 Heron Sensor Inteface Cards 29 Swing Joints & Risers Heron Fretigation Systems 29 Dura High Pressure Swing Joints 17 Articulated Risers 17 Controller Accessories Flexi Risers 17 Toro Hydraulic Control Fittings 30 Rigid PVC Risers 17 Sensors - Rain, Flow, Soil Moisture 30 Polypropylene Risers 17 Control Wire 31 Hose & Fittings Washdown Hose 18 Electrical Accessories Fittings 18 Wire Connectors 32 Earth Rods 32

4 Irrigation Price List Effective October 2011 Contents SECTION 4 - DRIP & MICRO IRRIGATION SECTION 5 - FILTRATION Aqua-Traxx Drip Tape Manual Filters Aqua-Traxx Tape 33 Plastic Screen and Disc 48,49 Aqua-Traxx PC Pressure Compensating Tape 33 Epoxy Coated Steel Screen and Disc 49,50 Aqua-Traxx Tape Fittings 34 Automatic Filters 50 Drip Tubing Metzerplas Drip Tubes 34 Hydrocyclone Separators 51 Toro Ag Drip In Tube 35 Toro DRIPMAXX Drip Tube 35 Media Filters 51 Drip Eze Landscape Tubing Fertiliser Injection 52 4mm Drip Eze Tube 36 13mm Drip Eze Tube 36 Aluminium Fittings 52 13mm Drip Eze with Rootguard 36 Enviro Drip - Lilac Tube 36 SECTION 6 - PIPE FITTINGS Drip Tube Fittings 37 PVC Pipe Fittings PVC Solvent Weld Fittings Jet Sprays & Drippers PVC Solvent Cement and Primer 60 Veri-Flow Drippers and Tricklers 38 Centurion Jets 38 MDPE Fittings Microjet Sprays 38 Jet Stakes and Risers 39 Hansen Fittings Turbo Key Drippers 39 Turbo Plus PC Drippers 39 LDPE Fittings NGE PC Drippers 39 Black Spider Pot Distribution System 39 Cast/Ductile Iron Fittings Pot Spray Stakes 39 Tapping Bands 73 Gibaults 73 Mini Sprinklers Flange Adaptors 73 Waterbird Sprinklers 40,41 Tees 74 Fogger Assemblies 41 Bends 74 Browning B Reducers 74 Antelco Sprinklers 42 Sluice Valves 74 Stakes & Accessories 42 Galvanised Fittings 75 Bulk Polyethylene Fittings SECTION 7 - OTTERBINE AERATION Fittings Taps 45 Punches 45 Ratchet Clips 46 Drip-Loc Fittings 47

5 Aqua-Traxx, Premium Drip Tape 16mm Aqua-Traxx 4 Mil EA cm Spacing Standard Flow 55kPa) 3,960m per roll EA cm Spacing LOW Flow 55kPa) 3,960m per roll EA cm Spacing Standard Flow 55kPa) 3,960m per roll Mil EA cm Spacing Standard Flow 55kPa) 3,045m per roll EA cm Spacing LOW Flow 55kPa) 3,045m per roll EA cm Spacing Standard Flow 55kPa) 3,045m per roll Mil EA cm Spacing Standard Flow 55kPa) 2,285m per roll EA cm Spacing LOW Flow 55kPa) 2,285m per roll EA cm Spacing Standard Flow 55kPa) 2,285m per roll Mil EA cm Spacing Standard Flow 55kPa) 1,830m per roll EA cm Spacing LOW Flow 55kPa) 1,830m per roll EA cm Spacing Standard Flow 55kPa) 1,830m per roll EA cm Spacing Standard Flow 55kPa) 1,830m per roll Mil EA cm Spacing Standard Flow 55kPa) 1,219m per roll EA cm Spacing Standard Flow 55kPa) 1,219m per roll mm Aqua-Traxx 8 Mil EA cm Spacing LOW Flow 55kPa) 2,285m per roll 1 POA EA cm Spacing Standard Flow 55kPa) 2,285m per roll 1 POA 10 Mil EA cm Spacing Standard Flow 55kPa) 2,285m per roll 1 POA EA cm Spacing Standard Flow 55kPa) 2,285m per roll 1 POA Available Spacings: 100mm, 150mm, 200mm, 300mm, 400mm, 450mm, 600mm - to order Flow Rates: 0.49lph, 0.76lph, 1.02lph, 1.2lph Aqua-Traxx PC, Pressure Compensating Drip Tape 16 mm Aqua-Traxx PC 8 Mil EAP cm Spacing Medium Flow 55kPa) 2,285m per roll 1 POA 10 Mil EAP cm Spacing Medium Flow 55kPa) 1,830m per roll 1 POA EAP cm Spacing Standard Flow 55kPa) 1,830m per roll 1 POA Available Spacings: 200mm, 300mm, 400mm, 450mm, 600mm. Page 33

6 Aquatraxx Tape Fittings mm Tape Joiner mm Tape Joiner mm Tape Tee mm Tape x 25mm BSP Female Tee FCR mm Lateral Tube x 16mm Tape Joiner GSTA16 16mm Tape Grommet Take Off Complete mm Barb x 16mm Tape Off-Take mm Compression Off-Take x 16mm Tape Joiner mm Tape x 20mm BSP Director mm Tape x 20mm BSP Director mm Barb x 16mm Tape In-Line Tap mm Tape End Plug Flush & Drain Valve (Closing Pressure 5.5 kpa) x 16mm Tape mm FPT Vent Valve Closing Pressure 5.5 kpa MHT-06-LS 16mm Tape x 20mm MHT Director - Use With Valve MHT-09-LS 22mm Tape x 20mm MHT Director - Use With Valve Adaptor-Lay Flat Tube x 16mm Tape Joiner Adaptor-Lay Flat Tube x 22mm Tape Joiner LFC16 Layflat Cutter METZERPLAS Drip Irrigation 16 mm Vardit 0.9mm Wall Thickness (Max Pressure 3.5Bar) Code Per 500m VAR Vardit 16mm, 1.6lph at 0.5m Spacing mm Vardit 0.9mm Wall Thickness (Max Pressure 3.5Bar) Code Per 500m VAR Vardit 17mm, 1.2lph at 0.4m Spacing VAR Vardit 17mm, 1.2lph at 0.5m Spacing VAR Vardit 17mm, 1.2lph at 0.6m Spacing Page 34

7 Toro Ag Drip-In PC Extra Emitter Flow Rates:- 1.6, 2.0, 2.4 and 4.0lph 16mm Drip-In - OD = 16mm, ID = 14mm, Maximum Pressure = 450kPa, 450m/roll 20mm Drip-In - OD = 20mm, ID = 18mm, Maximum Pressure = 450kPa, 300m/roll Spacings Available: 0.3, 0.4, 0.5, 0.6, 0.75, 0.9, 1.0, 1.2, 1.5m and Grouped. 16 mm Drip-In - PC Extra (Pressure Compensating) Spacing Code Per 450m DDC mm Drip-In 1.6 lph at 0.30m Spacing (450m) 1 POA 0.3m DDC mm Drip-In 2.0 lph at 0.30m Spacing (450m) 1 POA mm Drip-In 2.4 lph at 0.30m Spacing (450m) 1 POA DDC mm Drip-In 1.6 lph at 0.40m Spacing (450m) 1 POA 0.4m DDC mm Drip-In 2.0 lph at 0.40m Spacing (450m) 1 POA mm Drip-In 2.4 lph at 0.40m Spacing (450m) 1 POA DDC mm Drip-In 1.6 lph at 0.50m Spacing (450m) m mm Drip-In 2.4 lph at 0.50m Spacing (450m) mm Drip-In 4.0 lph at 0.50m Spacing (450m) DDC mm Drip-In 1.6 lph at 0.60m Spacing (450m) m mm Drip-In 2.4 lph at 0.60m Spacing (450m) mm Drip-In 4.0 lph at 0.60m Spacing (450m) DDC mm Drip-In 1.6 lph at 0.75m Spacing (450m) 1 POA 0.75m mm Drip-In 2.4 lph at 0.75m Spacing (450m) 1 POA mm Drip-In 4.0 lph at 0.75m Spacing (450m) 1 POA DDC mm Drip-In 1.6 lph at 0.90m Spacing (450m) 1 POA 0.9m mm Drip-In 2.4 lph at 0.90m Spacing (450m) 1 POA mm Drip-In 4.0 lph at 0.90m Spacing (450m) 1 POA 20 mm Drip-In - PC Extra (Pressure Compensating) Spacing Code Per 300m DDC mm Drip-In 1.6 lph at 0.40m Spacing (300m) 1 POA DDC mm Drip-In 1.6 lph at 0.60m Spacing (300m) 1 POA 0.6 m DDC mm Drip-In 2.0 lph at 0.60m Spacing (300m) 1 POA mm Drip-In 4.0 lph at 0.60m Spacing (300m) 1 POA DDC mm Drip-In 1.6 lph at 0.90m Spacing (300m) 1 POA 0.9 m mm Drip-In 2.4 lph at 0.90m Spacing (300m) 1 POA mm Drip-In 4.0 lph at 0.90m Spacing (300m) 1 POA Toro DRIPMAXX Drip Tube DRIPMAXX Options Sizes Wall Thickness Flow Rates Dripper Options Pressure Rating Roll lengths 13mm, 15mm ID, 19mm, 25mm 0.9mm (25mm Tube is 1mm) 0.8lph, 1.2lph, 1.6lph, 2.0lph, 3.5lph, Non -Comp, Compensating, Anti-Siphon, Non-Drain, Rootguard 350kPa 13mm - 600m, other sizes all 350m Drip Tube available to order to suit specification - POA Page 35

8 Toro Ag Drip-In PC Extra Tubing with ROOTGUARD R Specialised heavy duty dripline for use in sub-surface applications. ROOTGUARD R technology combines Treflan R with the drip emitter to prevent lateral root growth into the emitter. No other chemical treatment against roots is required. 13mm Drip-In PC With ROOTGUARD R Spacing Code 0.3m DGC mm Drip-In with Rootguard 2.0 lph at 0.30m Spacing (100m Coil) DGC mm Drip-In with Rootguard 2.0 lph at 0.30m Spacing (200m Coil) m DGC mm Drip-In with Rootguard 2.0 lph at 0.40m Spacing (100m Coil) DGC mm Drip-In with Rootguard 2.0 lph at 0.40m Spacing (200m Coil) All standard 13mm lateral fittings can be used with this product. 16mm Drip-In PC With ROOTGUARD R Spacing Code 0.5m DGC mm Drip-In with Rootguard 2.4 lph at 0.50m Spacing (400m Coil) DGC mm Drip-In with Rootguard 4.0 lph at 0.50m Spacing (400m Coil) m DGC mm Drip-In with Rootguard 2.4 lph at 0.60m Spacing (400m Coil) DGC mm Drip-In with Rootguard 4.0 lph at 0.60m Spacing (400m Coil) All 16mm Drip-In and 13mm Drip-Loc fittings can be used with this product. Drip Eze Landscape Tubing 4mm Non Compensating DDN mm DRIP EZE 2.0 lph at 0.3m Spacing (25m Coil) DDN mm DRIP EZE 2.0 lph at 0.3m Spacing (50m Coil) DDN mm DRIP EZE 2.0 lph at 0.3m Spacing (100m Coil) mm Non Compensating 2.0lph DDN mm DRIP EZE 2.0 lph at 0.3m Spacing (50m Coil) DDN mm DRIP EZE 2.0 lph at 0.3m Spacing (100m Coil) DDN mm DRIP EZE 2.0 lph at 0.3m Spacing (200m Coil) mm Compensating 1.6lph DDC mm DRIP EZE 1.6 lph at 0.4m Spacing (50m Coil) DDC mm DRIP EZE 1.6 lph at 0.4m Spacing (100m Coil) DDC mm DRIP EZE 1.6 lph at 0.4m Spacing (200m Coil) mm Compensating 2.0lph DDC mm DRIP EZE 2.0 lph at 0.3m Spacing (50m Coil) DDC mm DRIP EZE 2.0 lph at 0.3m Spacing (100m Coil) DDC mm DRIP EZE 2.0 lph at 0.3m Spacing (200m Coil) DDC mm DRIP EZE 2.0 lph at 0.4m Spacing (50m Coil) DDC mm DRIP EZE 2.0 lph at 0.4m Spacing (100m Coil) DDC mm DRIP EZE 2.0 lph at 0.4m Spacing (200m Coil) DDC mm DRIP EZE 2.0 lph at 0.5m Spacing (200m Coil) DDC mm DRIP EZE 2.0 lph at 0.6m Spacing (200m Coil) mm ENVIRO-DRIP PC - Lilac DLC mm DRIP EZE Lilac 2.0 lph at 0.3m Spacing (50m Coil) DLC mm DRIP EZE Lilac 2.0 lph at 0.3m Spacing (100m Coil) DLC mm DRIP EZE Lilac 2.0 lph at 0.3m Spacing (200m Coil) ENVIRO-DRIP is recommended for use with non potable water. Page 36

9 Drip Tube Fittings and Accessories Fittings For 16mm Drip Tube mm Joiner Drip-In mm Tee Drip-In mm Elbow Drip-In YC mm Drip Tube Y Connector mm Ratchet Clip Suit Drip-In mm Tail x 20mm BSP Male Director mm In-Line Tap Drip-In mm Grommet Take-Off Drip-In mm Grommet only FE16 16 mm Flushing End with O Ring Seal VC mm Vine Trellis Clip Note: Drip-loc 13 mm Fittings are also suitable for use with 16mm Drip-In (see page 48) Fittings For 17mm Drip Tube mm Joiner mm Ratchet Clip mm Drip Line x 19 mm Lateral Reducing Joiner mm Drip Line x 19 mm Lateral Elbow mm Drip Line x 16 mm Lateral Branch Increasing Tee mm Drip Line x 19 mm Lateral Branch Increasing Tee mm Drip Line x 13 mm Grommet Off Take Adaptor mm Grommet - Use with mm Green Back Valve Fittings For 18mm Drip-In mm Joiner Drip-In mm x 16 mm Reducing Joiner Drip-In mm Grommet Take-Off mm Ratchet Clip Suit Drip-In VC mm Vine Trellis Clip Note: Drip-loc 16 mm Fittings are also suitable for use with 18mm Drip-In (see page 48) Fittings For 20mm Drip-In mm Joiner Drip-In mm Tee Drip-In mm Elbow Drip-In mm Ratchet Clip Drip-In mm Tail x 20mm BSP Male Director mm x 16mm Reducing Joiner Drip-In mm Grommet Take-Off Drip-In VC20 20 mm Vine Trellis Clip Note: Drip-loc 19 mm Fittings are also suitable for use with 20mm Drip-In (see page 48) Riser Tube mm Riser Tube (450m Coil) XR mm Riser Tube (200m Coil) mm Riser Tube (300m Coil) For connection from sub-main to drip line Page 37

10 Jet Sprays & Drippers Veri-Flow Adjustable Dripper & Tricklers Veri-Flow Dripper Adjustable Flow 0-60l/h Trickler, Stream Adjustable Flow 0-30l/h 4mm Barb Trickler, Stream Adjustable Flow 0-50l/h 4mm Barb Trickler, Stream Adjustable Flow 0-50l/h 0n 100mm Spike Trickler, Stream Adjustable Flow 0-50l/h 4mm Barb Trickler, Stream Adjustable Flow 0-50l/h on 100mm Spike Landscape Bubblers & Jets Mini Bubbler Adjustable Flow 0-130l/h, 4mm Barb Mini Bubbler Adjustable Flow 0-130l/h, 15mm Female Base Mini Bubbler Adjustable Flow 0-130l/h, on 100mm Spike Spectrum 360 Jet Adjustable Flow 0-90l/h, 4mm Barb Spectrum 360 Jet Adjustable Flow 0-90l/h, 4mm Thread Spectrum 360 Jet Adjustable Flow 0-90l/h, 100mm Spike Centurion Spray Jets - One Piece Centurion Jet, Spray 90 o 100kPa Centurion Jet, Spray 180 o 100kPa Centurion Jet, Spray 360 o 100kPa Spray Jets - Winged One Peice Full Circle Blue Base, 100kPa /2 Circle Blue Base, 100kPa /4 Circle Blue Base, 100kPa Full Circle Green Base, 100kPa /2 Circle Green Base, 100kPa /4 Circle Green Base, 100kPa Full Circle Black Base, 100kPa /2 Circle Black Base, 100kPa /4 Circle Black Base, 100kPa Micro Spray 2 Piece Jets /4 Circle Complete - Blue Base, 100kPa /2 Circle Complete - Blue Base, 100kPa Full Circle Complete - Blue Base, 100kPa Micromist Spray, 100kPa - For Inverted Use Genuine Microjet TM 2 Piece Contractor Jets - While Stocks Last 101BL90 1/4 Circle Black Base 150kPa BL180 1/2 Circle Black Base 150kPa BL360 Full Circle Black Base 150kPa, 15 hole BU90 1/4 Circle Blue Base 150kPa BU180 1/2 Circle Black Base 150kPa BU360 Full Circle Black Base 150kPa, 15 hole GN90 1/4 Circle Green Base 150kPa GN180 1/2 Circle Green Base 150kPa GN360 Full Circle Green Base 150kPa, 15 hole RD90 1/4 Circle Red Base 150kPa RD180 1/2 Circle Red Base 150kPa RD360 Full Circle Red Base 150kPa, 15 hole Page 38

11 Jet Sprays & Drippers Jet Stakes and Risers mm Rigid Riser with Adaptor mm Rigid Riser with Adaptor mm Rigid Riser with Adaptor mm Asta Riser Stake suit 4mm Tube mm Asta Riser Stake suit 4mm Tube mm Asta Riser Stake suit 4mm Tube Jetstake suit 4mm/5mm Off-Take Tube Microstake with Tube and Adaptor Jet Riser Adaptor 15mm FBSP x 4mm Agricultural Drip Emitters L/h Turbo-Key Dripper L/h Turbo-Key Dripper L/h Turbo-Key Dripper L/h Turbo-Plus II (Pressure Compensating) L/h Turbo-Plus II (Pressure Compensating) L/h Turbo-Plus II (Pressure Compensating) DPC02-MA 2 L/h NGE PC Drip Emitter with Anti-Siphon DPC03-MA 3 L/h NGE PC Drip Emitter with Anti-Siphon DPC04-MA 4 L/h NGE PC Drip Emitter with Anti-Siphon DPC08-MA 8 L/h NGE PC Drip Emitter with Anti-Siphon DPC02-MA-AL 2 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 24kPa) DPC03-MA-AL 3 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 28 kpa) DPC04-MA-AL 4 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 31 kpa) DPC08-MA-AL 8 L/h NGE PC Drip Emitter with Anti-Drip (Closes at 35 kpa) Black Spider Pot Distribution System (Suits outlet from NGE and Turbo-Plus emitters) FBS1E Single Outlet Barbed Elbow x Female Adaptor FBS1S Single Outlet Barbed Straight x Female Adaptor FBS2 2 Outlet Barbed Tee x Female Adaptor FBS2-MA 2 Outlet Barbed Manifold x Female/Male Adaptor IPS0301 Turbulent Flow Straight Stake IPS0301BQ Turbulent Flow Barbed Elbow Stake IPS0301Q Turbulent Flow Elbow Stake SFH mm Spider Tube 450mm Long SFH mm Spider Tube 600mm Long SFH mm Spider Tube 900mm Long Pot Spray Stakes (uses 3mm Spider Tube as above) IPS03BK Pot Spray Stake Black, 140kPa IPS03BL Pot Spray Stake Black, kPa IPS03GR Pot Spray Stake Black, kPa Page 39

12 Mini-Sprinklers - Waterbird Waterbird R III-AA, 10 mm Male Base Anti-Ant Sprinkler (Insect Proof) Performance at 150 kpa Inlet Pressure Waterbird III-AA 10 mm, Maroon at 66 l/h Waterbird III-AA 10 mm, Grey at 144 l/h Waterbird R VI, 10 mm Male Base Performance at 150 kpa Inlet Pressure Waterbird VI 10 mm, Black Nozzle at 36 l/h Waterbird VI 10 mm, White Nozzle at55 l/h Waterbird VI 10 mm, Maroon Nozzle at 76 l/h Waterbird VI 10 mm, Green Nozzle at 99 l/h Waterbird VI 10 mm, Blue Nozzle at 134 l/h Waterbird VI 10 mm, Grey Nozzle at 155 l/h Waterbird VI 10 mm, Yellow Nozzle at 192 l/h Waterbird VI 10 mm, Red Nozzle at 265 l/h Waterbird R VI, 10 mm Male Base with Deflector Tab Spinner Performance at 150 kpa Inlet Pressure Waterbird VI 10 mm, Black Nozzle at 36 l/h Waterbird VI 10 mm, White Nozzle at 55 l/h Waterbird VI 10 mm, Maroon Nozzle at 76 l/h Waterbird VI 10 mm, Green Nozzle at 99 l/h Waterbird VI 10 mm, Blue Nozzle at 134 l/h Waterbird R VI, Pressure Compensating 10 mm Male Base Waterbird VI PC 10 mm, Purple Nozzle at 27 l/h Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h Waterbird VI PC 10 mm, Light Blue Nozzle at 47 l/h Waterbird VI PC 10 mm, Light Green Nozzle at 55 l/h Waterbird VI PC 10 mm, Orange Nozzle at 70 l/h Waterbird VI PC 10 mm, Grey Nozzle at 90 l/h Waterbird R VI, Pressure Compensating 10 mm Male Base with Deflector Tab Spinner Waterbird VI PC 10 mm, Purple Nozzle with Tab at 27 l/h Waterbird VI PC 10 mm, Brown Nozzle with Tab at 36 l/h Waterbird VI PC 10 mm, Light Blue Nozzle with Tab at 47 l/h Waterbird VI PC 10 mm, Light Green Nozzle with Tab at 55 l/h Waterbird VI PC 10 mm, Orange Nozzle with Tab at 70 l/h Waterbird VI PC 10 mm, Grey Nozzle with Tab at 90 l/h Page 40

13 Mini-Sprinklers - Waterbird Waterbird R VI Assembled on Stake With 0.6 m of 5 mm Tube Waterbird VI 10 mm, Black Nozzle at 36 l/h Waterbird VI 10 mm, White Nozzle at 55 l/h Waterbird VI 10 mm, Maroon Nozzle at 76 l/h Waterbird VI 10 mm, Green Nozzle at 99 l/h Waterbird R VI Assembled on 10mm Ag Stake with 0.8m of 10mm Tube and Off-Take Waterbird VI 10 mm, Green Nozzle at 99 l/h Waterbird VI 10 mm, Blue Nozzle at 134 l/h Waterbird VI 10 mm, Grey Nozzle at 155 l/h Waterbird VI 10 mm, Yellow Nozzle at 192 l/h Waterbird VI 10 mm, Red Nozzle at 265 l/h Waterbird R VI, Pressure Compensating Assembled on Stake with 0.6 m of 5mm Tube Waterbird VI PC 10 mm, Purple Nozzle at 27 l/h Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h Waterbird VI PC 10 mm, Light Blue Nozzle at 47 l/h Waterbird VI PC 10 mm, Light Green Nozzle at 55 l/h Waterbird VI PC 10 mm, Orange Nozzle at 70 l/h Waterbird VI PC 10 mm, Grey Nozzle at 90 l/h Mini-Sprinklers - The Olive Sprinkler Waterbird R VI, Pressure Compensating With Deflector Tab Spinner fitted on Red Olive Stake with 0.6 m of 5 mm Tube Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h Waterbird VI PC 10 mm, Brown Nozzle at 36 l/h m tube Waterbird VI PC 10 mm, Light Blue Nozzle at 47 l/h Waterbird VI PC 10 mm, Light Green Nozzle at 55 l/h Waterbird VI PC 10 mm, Orange Nozzle at 70 l/h Waterbird VI PC 10 mm, Grey Nozzle at 90 l/h Waterbird R VI, Non Pressure Compensating With Deflector Tab Spinner fitted on Red Olive Stake with 0.6 m of 5 mm Tube Waterbird VI 10 mm, Black Nozzle at 36 l/h The Olive Sprinkler Accessories Red Stake suit Olive Sprinkler - 5 mm Inlet Red Stake With 0.6 m of 5 mm Tube fitted WBT mm x 200 m PVC tubing Snap-On 180 degree deflector (Red) Fogger Nozzles Fogger Assembly Assembly with 300mm Tube and Weight FOGCP43 Four Nozzle Fogger Complete 3lph Nozzles FOGCP44 Four Nozzle Fogger Complete 4lph Nozzles FOGCP46 Four Nozzle Fogger Complete 6lph Nozzles FOGCP48 Four Nozzle Fogger Complete 8lph Nozzles CFFA Fogger Cap Page 41

14 Mini-Sprinklers Browning TM B500 Sprinklers Browning B500, 15mm Male Base without Nozzles Order Sprinkler & Two Nozzles Browning TM B500 Nozzles Browning B500 Nozzle Browning B500 Nozzle Browning B500 Nozzle Browning B500 Nozzle Browning B500 Nozzle Browning B500 Nozzle Mini Spinners Standard Spinner, Brown Jet - 150kPa Standard Spinner, Blue Jet - 150kPa Standard Spinner, Green Jet - 150kPa Standard Spinner, Red Jet kPa Inverted Spinner, Brown Jet - 150kPa Inverted Spinner, Blue Jet - 150kPa Inverted Spinner, Green Jet - 150kPa Inverted Spinner, Red Jet - 150kPa Rotor Max Midi Sprinklers Rotor Max Red Nozzle 10mm Base - 200kPa 13m dia Rotor Max Black Nozzle 10mm Base - 200kPa 13m dia Rotor Max Purple Nozzle 10mm Base - 200kPa 13.8m dia Rotor Max Inverted Red Nozzle 15mm Base - 200kPa 13m dia Rotor Max Inverted Black Nozzle 15mm Base - 200kPa 13m dia Rotor Max Inverted Purple Nozzle 15mm Base - 200kPa 13.8m dia Waterbird & Mini Sprinkler Stakes & Accessories Waterbird Stake 5mm Vertical Inlet Waterbird Stake 5mm Vertical Inlet Fitted with 0.6m of Tube WBS1045 Waterbird Stake 10mm with 45 o Inlet (Ag Stake) WBS1045WT Waterbird Stake 10mm with 45 o Inlet (Ag Stake) and 0.8m of 10mm Tube Mini-Sprinkler Rod Stake Adaptor, 5mm Barbed x 10mm Female IPG10091 Waterbird PC Rod Stake Adaptor, 5mm Barbed x 10mm Female GR5 5mm Galvanised Rod Stake 1.0m mm/10mm Stake Adaptor with 10mm Hose Tail (Accepts 20mm upvc cut to length for stake) WBD180B Waterbird Snap-On 180 o Deflector (Black) WBT5200 5mm Waterbird Flexible PVC Tubing x 200m Coil Page 42

15 Bulk Polyethylene Fittings Nuts & Tails mm BSP Nut and 13 mm Tail mm BSP Nut and 13 mm Tail mm BSP Nut and 19 mm Tail mm BSP Nut and 19 mm Tail mm BSP Nut and 25 mm Tail Directors mm Tail x 15 mm BSP Male Director mm Tail x 20 mm BSP Male Director mm Tail x 25 mm BSP Male Director mm Tail x 15 mm BSP Male Director mm Tail x 20 mm BSP Male Director mm Tail x 25 mm BSP Male Director mm Tail x 20 mm BSP Male Director mm Tail x 25 mm BSP Male Director Tees Barbed Tee 4 mm - all tails Barbed Tee 13 mm - all tails Barbed Tee 16 mm - all tails Barbed Tee 19 mm - all tails Barbed Tee 25 mm - all tails Reducing Tees Barbed Tee 19 mm line x 13 mm Branch Barbed Tee 25 mm line x 13 mm Branch Barbed Tee 25 mm line x 19 mm Branch Male Threaded Tees mm Barbed x 15 mm BSP Male Threaded Tee mm Barbed x 15 mm BSP Male Threaded Tee mm Barbed x 20 mm BSP Male Threaded Tee mm Barbed x 15 mm BSP Male Threaded Tee mm Barbed x 20 mm BSP Male Threaded Tee mm Barbed x 25 mm BSP Male Threaded Tee Female Threaded Tees mm Barbed x 15 mm BSP Female Threaded Tee mm Barbed x 15 mm BSP Female Threaded Tee mm Barbed x 15 mm BSP Female Threaded Tee Page 43

16 Bulk Polyethylene Fittings Joiners/Adaptors mm Adaptor, screwed both ends mm Barbed Off-Take (Joiner) mm Barb/Thread Adaptor mm Barbed Off-Take (Joiner) mm x 10 mm Barbed Off-Take (use 1146 Punch) mm Barbed Joiner mm Barbed Joiner mm Barbed Joiner mm Barbed Joiner mm Barbed Joiner Reducing Joiners mm x 10 mm Barbed Reducing Joiner mm x 13 mm Barbed Reducing Joiner mm x 13 mm Barbed Reducing Joiner mm x 16 mm Barbed Reducing Joiner mm x 19 mm Barbed Reducing Joiner Crosses mm Barbed Cross mm Barbed Cross mm Barbed Cross Elbows mm Barbed Elbow mm Barbed Elbow mm Barbed Elbow mm Barbed Elbow Male Threaded Elbows mm Barbed x 15 mm BSP Male Threaded Elbow mm Barbed x 15 mm BSP Male Threaded Elbow mm Barbed x 20 mm BSP Male Threaded Elbow mm Barbed x 25 mm BSP Male Threaded Elbow mm Barbed x 15 mm BSP Male Threaded Elbow mm Barbed x 20 mm BSP Male Threaded Elbow mm Barbed x 25 mm BSP Male Threaded Elbow Female Threaded Elbows mm Barbed x 15 mm BSP Female Threaded Elbow mm Barbed x 15 mm BSP Female Threaded Elbow mm Barbed x 15 mm BSP Female Threaded Elbow Page 44

17 Bulk Polyethylene Fittings Threaded Corner Elbow mm x 15 mm BSP Male Threaded Corner Elbow mm x 20 mm BSP Male Threaded Corner Elbow mm x 15 mm BSP Female Threaded Corner Elbow End Plugs mm End Plug Barbed mm End Plug Barbed mm End Plug Barbed mm End Plug Barbed Taps mm Threaded In-Line Tap mm Barbed Veri-Flow Tap mm In-Line Barbed Tap mm In-Line Barbed Tap mm In-Line Barbed Tap (Green Back) mm In-Line Barbed Tap (Green Back) mm In-Line Barbed Tap (Green Back) mm In-Line Barbed Tap (Green Back 45545) Poly Tube Connectors Poly Tube Connector 13mm Snap-Sure Tap Connector x 13 mm Tube Snap-Sure Tap Connector x 19 mm Tube mm Barb to Snap-On Hose Adaptor mm Barb to Snap-On Hose Adaptor Punches Punch -Domestic Drippers 4 mm P3 Hole Punch for 4mm Fittings P4 Hole Punch for 5mm Fittings P5 Hole Punch for DT0813 Fittings UP3 Universal Punch for 4mm Barbs for 13mm - 32mm Poly UP4 Universal Punch for 5mm Barbs for 13mm - 32mm Poly LFC16 Lay Flat Hole Cutter 5/8" (16mm) INSERTER Micro Fitting Insertion Tool Mounting Clips mm Mounting Clip mm Mounting Clip mm Saddle Clamps mm Saddle Clamps Page 45

18 Bulk Polyethylene Fittings Ratchet (Cray) Clamps and Saddle Clamps Ratchet Clamp to suit 13 mm Lateral Tube Antelco Ratchet Clamp #15 to suit 13mm Lateral Tube Antelco Ratchet Clamp #18 to suit 16 mm Lateral Tube Tube Ratchet Clamp to suit 16mm Drip In Antelco Ratchet Clamp #17 to suit 17mm Drip Lines Ratchet Clamp to suit 19 mm Lateral Tube & 20mm Drip-In Antelco Ratchet Clamp #22 to suit 19mm Lateral Tube Ratchet Clamp to suit 25 mm Lateral Tube Antelco Ratchet Clamp #28 to suit 25 mm Lateral Tube mm Stainless Steel Cobra Clips for Poly Tube and Drip-In 101C11.5 Cobra Clip mm (10mm Lateral) C15 Cobra Clip mm (13mm Lateral) C16 Cobra Clip mm (16mm Drip-In) C17 Cobra Clip mm (16mm Lateral) C18 Cobra Clip mm (18mm Drip-In) C20 Cobra Clip mm (20mm Drip-In) C27 Cobra Clip mm (25mm Lateral) CHT Clamping Tool Repair Plugs Sealing Plug (Goof Plug) - 4 mm FPG02 Double Sided Sealing Plug (Goof Plug) - 5mm x 8mm Off-Takes DT0813C 13mm Lateral x 8mm Barb Take Off For Drip-Eze ET0813C 13mm Lateral x 8mm Barb Take Off Elbow for Drip-Eze mm x 10 mm Barbed Off-Take (use 1146 Punch) mm Compression Off-Take mm Grommet Off-Take complete (11mm Drill) Antelco Expando Off-Takes mm Expando Off-Take mm Expando Off-Take mm Expando x 25mm Off-Take Top Hat Grommets Rubber Top Hat Grommet 13mm Rubber Top Hat Grommet 16mm Rubber Top Hat Grommet 19mm CURLY-CLIP CC Curly-Clip #2 Suits 16mm - 19mm OD Tube Ground Staples GS125 Ground Staple 125mm Galvanised GS230 Ground Staple 230mm Galvanised Page 46

19 Drip-Loc R Compression Polyethylene Fittings Drip-Loc Tees (complete with rings) mm Drip-Loc Tee mm Drip-Loc Tee Drip-Loc Threaded Tees (complete with rings) mm Drip-Loc Tee x 15 mm BSP Male Threaded Tee Drip-Loc Joiners (complete with rings) mm Drip-Loc Joiner mm Drip-Loc Joiner mm Drip-Loc Joiner mm Drip-Loc Joiner mm Drip-Loc Joiner Drip-Loc Reducing Joiners (complete with rings) x 10 mm Drip-Loc Reducing Joiner x 13 mm Drip-Loc Reducing Joiner x 13 mm Drip-Loc Reducing Joiner x 19 mm Drip-Loc Reducing Joiner Drip-Loc Threaded Elbow (complete with rings) Drip-Loc Elbow 19 mm x 15 mm BSP Male Drip-Loc End Stops mm Drip-Loc End Stop mm Drip-Loc End Stop Drip-Loc Take-Offs (complete with rings) mm Drip-Loc Grommet Take-Off Complete (16mm Hole) mm Drip-Loc Grommet Take-Off Complete (22mm Hole) mm Drip-Loc Grommet Take-Off Complete (22mm Hole) mm Drip-Loc Grommet Take-Off Complete (33mm Hole) Grommets for Drip-Loc Take-Offs mm Curved GTO Rubber , 19 mm Curved GTO Rubber mm Curved GTO Rubber Technical Information Fast and easy to install Drip-Loc R Grommet Off-Takes are used for connecting polyethylene tubing to upvc submains. Submain wall thickness to be between 2.2mm and 4.0mm Minimum Poly Lateral wall thickness of 1.0 mm is required for suitable connection. Installation Tip: Use only slow speed hand drills. Do NOT use high speed drills. Note: 13mm DRIP-LOC fittings can be used with 16mm Drip-In, 16mm DRIP-LOC fittings can be used with 18mm Drip-In and 19mm DRIP-LOC fittings can be used with 20mm Drip-In Page 47