TXB Series Explosion Proof
|
|
|
- Pauline McDaniel
- 5 years ago
- Views:
Transcription
1 General Characteristics of TXB Series The TXB Series is recommended for most paint spray applications because the motor is out of the air stream and not exposed to paint overspray. For Industrial and commercial use. For indoor use, for use with ducts. Eliminates fumes and vapors from paint spray booths and other hazardous areas. Explosion proof motors are Class I, Div. 1, Group D and Class 2, Div. 1, Groups F & G. Is designed with totally enclosed and explosion proof motors. Single phase motors are field convertible 115V/230V. Three phase motors are field convertible 230V/460V. Motors set at factory to lower voltage unless a request is made at time of order to set to the higher voltage. Made with a 14 gauge steel drum including mounting flanges at each end. Completely enclosed belt and ball bearing housing. Adjustable motor base for proper belt tension. Rugged cast aluminum blade, non-sparking. Fans can be mounted to operate in any position. Options: Companion flanges, protective coating, access doors, belt guards, motor covers and Fans guards. All options must be specified and are quoted separately. Product Applications of TXB Series Industrial and Commercial use. Eliminates fumes and vapors from paint spray booths and other hazardous areas. For indoor use. Warranties and Guaranties of TXB Series Explosion Proof s Manufacturer's Limited Warranty: 1 Year. Specific Characteristics of TXB Series s USEBE-001 TXB12-1/ / / / ,16,16 USEBE-002 TXB12-1/ / / / ,16,16 USEBE-003 TXB12-1/ / / / ,16,16 USEBE-004 TXB12-3/ / / / ,16,16 USEBE-005 TXB12-1/ / / / ,16,16 USEBE-006 TXB12-1/ / / / ,16,16-1 -
2 - 2 - USEBE-007 TXB12-1/ / / / ,16,16 USEBE-008 TXB12-3/ / / / ,16,16 USEBE-009 TXB15-1/ / / / ,19,19 USEBE-010 TXB15-1/ / / / ,19,19 USEBE-011 TXB15-1/ / / / ,19,19 USEBE-012 TXB15-3/ / / / ,19,19 USEBE-013 TXB15-1/ / / / ,19,19 USEBE-014 TXB15-1/ / / / ,19,19 USEBE-015 TXB15-1/ / / / ,19,19 USEBE-016 TXB15-3/ / / / ,19,19 USEBE-017 TXB18-1/ / / / ,22,22 USEBE-018 TXB18-1/ / / / ,22,22 USEBE-019 TXB18-1/ / / / ,22,22 USEBE-020 TXB / / ,22,22 USEBE-021 TXB18-1 1/ / / ½ ,22,22 USEBE-022 TXB18-1/ / / / ,22,22 USEBE-023 TXB18-1/ / / / ,22,22 USEBE-024 TXB18-1/ / / / ,22,22 USEBE-025 TXB / / ,22,22 USEBE-026 TXB18-1 1/ / / ½ ,22,22 USEBE-027 TXB24-1/ / / / ,29,29 USEBE-028 TXB24-3/ / / / ,29,29 USEBE-029 TXB / / ,29,29 USEBE-030 TXB24-1 1/ / / ½ ,29,29 USEBE-031 TXB /230 18/ ,29,29 USEBE-032 TXB24-1/ / / / ,29,29 USEBE-033 TXB24-3/ / / / ,29,29 USEBE-034 TXB / / ,29,29 USEBE-035 TXB24-1 ½ / / ½ ,29,29 USEBE-036 TXB / / ,29,29 USEBE-037 TXB / / ,29,29 USEBE-038 TXB27-3/ / / / ,32,32 USEBE-039 TXB / / ,32,32 USEBE-040 TXB27-1 1/ / / ½ ,32,32 USEBE-041 TXB /230 18/ ,32,32 USEBE-042 TXB27-3/ / / / ,32,32 USEBE-043 TXB / / ,32,32 USEBE-044 TXB27-1 ½ / / ½ ,32,32 UEEBE-045 TXB / / ,32,32 USEBE-046 TXB30-1/ / / / ,35,35 USEBE-047 TXB / / ,35,35 USEBE-048 TXB30-1 1/ / / ½ ,35,35 USEBE-049 TXB /230 18/ ,35,35 USEBE-050 TXB30-1/ / / / ,35,35 USEBE-051 TXB / / ,35,35 USEBE-052 TXB30-1 ½ / / ½ ,35,35 USEBE-053 TXB / / ,35,35 USEBE-054 TXB / / ,35,35 USEBE-055 TXB / / ,35,35
3 USEBE-056 TXB34-1 1/ / / ½ ,39,39 USEBE-057 TXB /230 18/ ,39,39 USEBE-058 TXB34-1 1/ / / ½ ,39,39 USEBE-059 TXB / / ,39,39 USEBE-060 TXB / / ,39,39 USEBE-061 TXB / / ,39,39 USEBE-062 TXB42-1 1/ / / ½ ,47,47 USEBE-063 TXB /230 18/ ,47,47 USEBE-064 TXB42-1 ½ / / ½ ,47,47 USEBE-065 TXB / / ,47,47 USEBE-066 TXB / / ,47,47 USEBE-067 TXB / / ,47,47 USEBE-068 TXB / / ,53,53 USEBE-069 TXB48-7 ½ / / ½ ,53,53 Dimensions (In.) of TXB Series s Series Length Width Height A B C USEBE-001 to USEBE-009 to USEBE-017 to USEBE-027 to & USEBE-038 to USEBE-046 to USEBE-056 to USEBE-062 to USEBE-068 &
4 TXB Series s Ratings Definitions Class I: Equipment does not have surface operating temperature in excess of the ignition temperature of the specific gas or vapor. Application Examples: Offshore and land based drilling rigs, petroleum exploration and testing facilities. Petroleum refineries, gasoline storage and dispensing areas. Industrial firms that use flammable liquids in dip tanks for parts cleaning or other operations. Petrochemical companies that manufacture chemicals from gas or oil. Dry cleaning facilities where vapors from cleaning fluids may be present. Aircraft hangers and fuel servicing areas. Utility gas plants and operations involving storage and handling of liquefied petroleum or natural gas. Group C: Atmospheres such as but not limited to acetaldehyde, allyl alcohol, hydrogen sulfide, ethylene, carbon monoxide, or other gases or vapors of equivalent hazard. Group D: Atmospheres such as but not limited to acetone, alcohol, gasoline, lacquer solvent vapors, natural gas, propane or other gases or vapors of equivalent hazard. Class II: Equipment does not have surface temperature greater than the ignition temperature of the specified dust. Application Examples: Coal preparation plants and other carbon handling or processing areas. Grain elevators, flour and feed mills. Plants which manufacture, use or store Magnesium or Aluminum powders. Plants that have chemical or metallurgical processes. Producers of starch products or candy. Spice grinding plants, sugar plants and cocoa plants. Group E: Atmosphere containing combustible metal dust regardless of resistivity, or other combustible dust of similar hazard characteristics having resistivity of less than 10 5 OHM- centimeter. Group F: Atmosphere containing carbon black, charcoal, coal or coke dust. Group G: Atmospheres containing combustible dust having resistivity of 10 5 OHM- centimeter or greater. Division I: A location in which ignitable concentrations of flammable material exist under normal operating conditions. Division II: Locations in which flammable materials will normally be confined within closed containers and escape only in the case of accidental rupture, breakdown or during maintenance operations. Any equipment approved for Division I is automatically also approved for Division II
5 Short Description of TXB Series s Manufacturing Short Description 70 Characters Maximum # USEBE-001 TXB12-1/4 12,1440CFM,115/230V,2.25/1.13A,1PH,1/4HP,60Hz,2625RPM,77DB s, Exp. SEO Table of TXB Series s Title TPI TXB Series s. Meta Description TPI TXB Series s for Industrial Use, TPI TXB Series s for Commercial use, TPI TXB Series s for Indoor Use, TPI TXB Series s for Ventilation Use, TPI TXB Series s for Exhaust Use. Meta Key Words TPI TXB Series s for Industrial Use, TPI TXB Series s for Commercial use, TPI TXB Series s for Indoor Use, TPI TXB Series s for Ventilation Use, TPI TXB Series s for Exhaust Use. Meta URL (file name) Tpi-txb-series-tubeaxial-belt-drive-duct-fans-us-english.htm Product Line Description of TXB Series s <FONT Size=1> <b>type:</b> TPI TXB Series s<br> <b>drive Type:</b> Belt Drive<br> <b>motor Type:</b> <br> <b>manufacturer:</b> TPI<br> <b>model Series:</b> TXB<br> <b>voltage:</b> 115/230 & 230/460V<br> <b>horse Power:</b> 1/2 to 7 1/2HP<br> <b>diameters:</b> 12, 15, 18, 24, 27, 30, 34, 42 & 48 <br> <b>air Flow:</b> 380 to 37000CFM<br> <b>ship By:</b> Free LTL Freight<br> </FONT> - 5 -
EHB Series Explosion Proof Heavy Duty Belt Drive Exhaust Fans Data sheet
General Characteristics of EHB Series Exhaust Fan Used in industrial and commercial environments. May be used indoors only unless they have protection from the elements. The EHB Series are industrial fans
LIGHTING TOOLS RATED
LIGHTING TOOLS RATED // More Reasons Why Heroes Trust Streamlight From the New York Fire Dept., the Royal Canadian Mounted Police and New Zealand mountain rescue teams to workers on remote oil rigs, in
Jefferson Electric Class I Division 2 Transformers for hazardous locations
Class I Division 2 Jefferson Electric Class I Division 2 Transformers for hazardous locations Jefferson Electric offers a full line of Class I Division 2 transformers. Jefferson Electrics Class I Division
An operational permit is required to conduct cutting or
International Fire Code Permits The following operations require an International Fire Code Permit. Permit prices vary. Permit applications are available on our web page or by visiting our Prevention Division
Installation & Maintenance Manual
Installation & Maintenance Manual Techtop Industries, Inc. 1268 Old Alpharetta Road Alpharetta, GA 30005 www.techtop.com info@techtopind.com Before you install, operate or perform maintenance, become familiar
Technology Fee Total Fee Amusement buildings An operational permit is required to operate a special amusement building $ $12.00 $162.
Permit Fee Technology Fee Total Fee 105.6.2 Amusement buildings An operational permit is required to operate a special amusement building 105.6.6 Combustible dust-producing operations An operational permit
HVA - BELT DRIVE WALL FANS Designed for heavy duty commercial and industrial exhaust applications.
HV - ELT RIVE WLL FNS esigned for heavy duty commercial and industrial exhaust applications. Heavy duty airfoil-cast aluminum or anti-static glass reinforced nylon blades are standard on HV series fans
Selecting Explosion-Proof Motors And Variable-Frequency Drive Controllers For Hazardous Environmental Applications
Selecting Explosion-Proof Motors And Variable-Frequency Drive Controllers For Hazardous Environmental Applications Application Solution Introduction Applying variable frequency power to explosion-proof
by Jim Phillips, P. E.
by Jim Phillips, P. E. Baking flour, coal dust and gasoline; what do these things have in common? They are not the ingredients for a strange new cake recipe. Each of these ingredients is the fuel that
Comfort. Description. Applications
Blower Heater 3-35 kw 10,236-119,420 Btuh 208, 240, 480 and 575 Volt 1 or 3 Phase Built-in Controls Description Type is designed to heat areas classified as hazardous locations to provide primary or supplementary
MODEL TDB TUBEAXIAL INLINE BELT DRIVEN DUCT FAN
TUBEAXIAL INLINE BELT RIVEN UCT FAN Model Features Rated up to 75,490 CFM in static pressure applications up to 1-1/2 w.g. 12 sizes ranging from 12 to 60 propeller diameters Motor drives are located outside
Fans for ATEX EXPLOSIVE ATMOSPHERES
Fans for ATEX EXPLOSIVE ATMOSPHERES An ATEX area is a mixture of air and inflammable gas, the vapour of an inflammable liquid, a fog of combustible liquid or combustible powder, which, if they catch fire,
Comfort. Sewage Treatment Plants. Petrochemical Facilities, Oil Rigs. Unattended Pumping Stations. Chemical Storage and Handling Facilities
3-35 kw 10,200-119,420 Btuh 208 to 600 Volts 1 or 3 Phase Meets NEC, OSHA and UL Requirements ATEX and GOST Models Available Refer to WR-80EP in the Controls section. F-4 Description Type is designed to
EXPLOSION-PROOF MOTORS SINGLE PHASE
AC Motors MOTORS SINGLE PHASE Underwriters Laboratories and Canadian Standards Association Listed These explosion proof motors are designed and approved for application in hazardous environments having
254 Series Convector. Standard Construction Features
American Bureau of Shipping Class I, Divisions and 2, Groups B, C and D Class II, Divisions and 2, Groups E, F and G Class I, Zones and 2, Groups IIB and H2 Applications Battery Storage Areas Chemical
Convector. Standard Construction Features
American Bureau of Shipping Class I, Divisions and 2, Groups B, C and D Class II, Divisions and 2, Groups E, F and G Class I, Zones and 2, Groups IIB and H2 Applications Battery Storage Areas Chemical
FR Series Heat Exchanger Unit Heater
FR Series Heat Exchanger Unit Heater FR Unit Heaters are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
TPI Industrial Assembled Maximum Duty Circulators
TPI Industrial Assembled Maximum Duty Circulators 2 Easy access hinged guard 18 drop down, 2-Speed switch Cord options are shown below Steel hub/spider aluminum paddle blades Powder coated steel guards
FR Heat Exchanger Unit Heater
Unit Heater Ruffneck are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications. The Series heaters
Model 5000 Level Controller
Features Multiple Configurations The 5000 level controller is easily configured for either reverse or direct actions for both pneumatic and electric pilot options. The pneumatic pilot is available in snap
Model LIDA. DIRECT DRIVE TUBEAXIAL FANS Model LIDA DIRECT DRIVE TUBEAXIAL FANS SECTION 12. Application. Options/Accessories
IRECT RIVE TUBEAXIAL FANS Model LIA Model LIA IRECT RIVE TUBEAXIAL FANS SECTION 12 Application Carnes Company tubeaxial fans offer one of the widest ranges of sizes, horsepower and performance in the industry.
SENSIT TKX INSTRUCTION MANUAL. Combustible Gas Leak Detector. Read and understand instructions before use.
INSTRUCTION MANUAL SENSIT TKX Combustible Gas Leak Detector Read and understand instructions before use. 7WA6 Approved UL913, For Class I, Division 1, Groups C & D hazardous locations when used with alkaline
HP Heat Exchanger Unit Heater
Unit Heater Ruffneck are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications, such as space heating
Flow Computer Installation
Flow Computer Installation WARNING: Only personnel who are experienced with field wiring should perform these procedures. All field wiring must conform to the National Electrical Code, NFPA 70, Article
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
36" Explosion Proof High Velocity Rollback Fan CFM - 1-1/2 HP - 115/230V - C1D1 - C2D1
36" Explosion Proof High Velocity Rollback Fan - 14850 CFM - 1-1/2 HP - 115/230V - C1D1 - C2D1 Part #: EPF-RSPF-36-1.5HP-100 Page: 1 Made in the USA The EPF-RSPF-36-1.5HP-100 from Larson Electronics is
C1D1 Solar Powered Explosion Proof LED Indicator Light - 80' Cord - C1D2 Panel
C1D1 Solar Powered Explosion Proof LED Indicator Light - 80' Cord - C1D2 Panel Part #: EPSLED-80-STB-SOL-80C-C1D2-20C Page: 1 Made in Texas The EPSLED-80-STB-SOL-80C-C1D2-20C Solar Powered Explosion Proof
SKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
Hison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
Model 5000 Level Controller
Features Multiple Configurations The 5000 level controller is easily configured for either reverse or direct actions for both pneumatic and electric pilot options. The pneumatic pilot is available in snap
Hazardous Location Enclosures INDEX. Hazardous Location Enclosures HAZ-2
Hoffman s new ZonEX ATEX-certified enclosures can be used in Zone 1- and Zone 2-rated applications throughout the world. Our NEMA Type 9 enclosures are designed for use in Class II Division 1 and 2 locations
Custom Shipyard and Military Facility Products
Custom Shipyard and Military Facility Products Safety Products Designed for Special Applications Respiratory Protection, Confined Space Ventilation and Portable Area Lighting Off the Shelf Or Custom Solutions
Hison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
Effective Date: 14-January Table of Contents
Version: 5 Page: 1 of 12 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 3 Environmental Health and Safety Office (EHSO) and applicable
Plugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
Sources of Ignition and Hazardous Area Classification Core
Sources of Ignition and Hazardous Area Classification Core Likelihood of Ignition Factors of Explosion What factors influence the likelihood of explosion? We must work to prevent loss of containment and
Centrifugal Utility Fans - SFD/SFB
C H F D B G E A Centrifugal Utility Fans - SFD/SFB SFB STANDARD CONSTRUCTION FEATURES HOUSING: Heavy gauge steel housing with Lock-seam construction Unit support angles with prepunched mounting holes Adjustable
Americraft is dedicated to assist you, our customer, in all aspects of your air moving requirements.
mericraft Manufacturing Company Inc. has been manufacturing quality industrial fans and ventilation products since 1946. Our 50+ years of proven experience, strong national reputation and excellent customer
C1D1 Solar Powered Explosion Proof LED Strobe Light - 20' 16/2 SOOW Cord - C1D2 Panel
C1D1 Solar Powered Explosion Proof LED Strobe Light - 20' 16/2 SOOW Cord - C1D2 Panel Part #: EPSLED-80-SOL-80C-C1D2-20C-MOD1 Page: 1 Made in Texas The EPSLED-80-SOL-80C-C1D2-20C-MOD1 Solar Powered Explosion
VALVCON. QX-Series ELECTRIC ACTUATORS. Installation, Maintenance and Operating Instructions
VALVCON QX-Series ELECTRIC ACTUATORS Installation, Maintenance and Operating Instructions IMO-I3000 1/2014 2 IMO-I3000 Table of Contents 1 GENERAL.................................... 3 1.1 QX-Series Electric
Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
Regulations (Standards - 29 CFR) Powered industrial trucks
Regulations (Standards - 29 CFR) Powered industrial trucks. - 1910.178 Part Number: 1910 Part Title: Occupational Safety and Health Standards Subpart: N Subpart Title: Materials Handling and Storage Standard
List Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
1/4 thru 300 Hp NEMA 48 thru 449TY. List Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
Installation and Service Instructions for EX Series Explosion-proof Switches
Installation and Service Instructions for EX Series Explosion-proof Switches ISSUE 4 50009662 WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application
Petroleum industries are dealing with different hazardous materials starting from storing, processing and distributing the petroleum products These he
FIRE SAFETY OF PETROLEUM INDUSTRIES By- Debapriya Biswas Additional Director General West Bengal Fire & Emergency Services Petroleum industries are dealing with different hazardous materials starting from
1 of 13 8/19/13 10:18 AM
A to Z Index En español Contact Us FAQs About OSHA OSHA Newsletter RSS Feeds Print This Page Text Size Was this page helpful? What's New Offices Home Workers Regulations Enforcement Data & Statistics Training
MOUNT KIT. Installation Instructions CAUTION. Read this document before installing the snowplow. CAUTION
Fisher Engineering P.O. Box 529 Rockland, Maine 04841 June 27, 2005 Lit. No. 27272, Rev. 01 MOUNT KIT Dodge Dakota 2005 - Installation Instructions Read this document before installing the snowplow. See
MODEL CTB TUBULAR CENTRIFUGAL INLINE BELT DRIVEN FAN
MODEL FEATURES Rated up to 20,000 CFM in static pressure applications up to 2-1/2 w.g. Motor drives are located outside of the airstream Ideal for applications where space is limited Belt drives permit
Air-Operated Double-Diaphragm Pump
Air-Operated Double-Diaphragm Pump Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with General Purpose, Watertight or Explosion-Proof Enclosures
S-SERIES Pressure Switches Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with, or s Features: Set point repeatability, +1% of operating range. All wiring terminals, adjustments
Twin City Fan & Blower
BULLETIN 600 Twin City Fan & Blower September 2009 VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE
TUBEAXIAL PAINT SPRAY BOOTH EXHAUST FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS TUBEAXIAL PAINT SPRAY BOOTH EXHAUST S MODEL TCBS CATALOG AX220 MAY 2013 TUBEAXIAL S Model TCBS The Twin City Fan & Blower model TCBS
MOUNT KIT PERSONAL PLOW
August 15, 2007 Lit. No. 64608, Rev. 01 3723 MOUNT KIT PERSONAL PLOW Jeep Wrangler 1997-2006 Installation Instructions Read this document before installing the snowplow. See your sales outlet/web site
2 Fluid Level Management
2 Fluid Level Management Introduction.................................... 2-3 REN Oil Level Regulator........................ 2-5 REN Slow Flow Meter.......................... 2-9 Slow Flow Meter Remote
WESTERN PRODUCTS, P.O. BOX , MILWAUKEE, WI TRUCK MOUNT. Installation Instructions
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64498 October 1, 2003 3919 TRUCK MOUNT Installation Instructions Dodge Dakota 4X4 2000 2004 Dodge Durango 4X4 2000 2003 Read this document
MOUNT KIT PERSONAL PLOW
August 1, 2006 Lit. No. 29316, Rev. 01 MOUNT KIT PERSONAL PLOW Nissan Frontier/Pathfinder 2005 - Installation Instructions Read this document before installing the snowplow. See your sales outlet for specific
Forklifts and Other Powered Industrial Trucks
Forklifts and Other Powered Industrial Trucks Chapter 296-863 April 2007 Edition DANGER HAZARDOUS A EA Washington Industrial Safety & Health Act F414-126-000 09/2009 printing Standards Update Chapter 296-863
Explosion Proof LED String Lights - 7 lights - Class 1 Division 1 and Class 2 Division 1
Explosion Proof LED String Lights - 7 lights - Class 1 Division 1 and Class 2 Division 1 Part #: EPL-SL-7-LED Page: 1 Made in the USA The Larson Electronics EPL-SL-10-LED Explosion Proof String Light set
AH / AV. Advanced Series Unit Heaters AH / AV. Ruffneck
The Ruffneck Advanced Series heaters are designed for rugged industrial applications and are available in 37 models from 6,000 to 1,,000 Btu/hr With a maximum operating pressure and temperature rating
1223 TRUCK MOUNT. Installation Instructions for Personal Plow. Ford F Ford Expedition
April 1, 2003 Lit. No. 27423 1223 TRUCK MOUNT Installation Instructions for Personal Plow Ford F150 1997 2003 Ford Expedition 1997 2002 Read this document before installing the snowplow. See your sales
T1-Titanium Non-HVLP Spray Gun
T1-Titanium Non-HVLP Spray Gun THE SPRAY GUN PEOPLE FOR PRODUCT INFORMATION CALL: 1-800-742-7731 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.
Table Of Contents & Limited Warranty
Table Of Contents & Limited Warranty CATEGORY Page INDUSTRIAL CIRCULATORS 24 & 30 Assembled Maximum Duty 2 24 & 30 Unassembled Maximum Duty 3 24 & 30 Heavy Duty Yellow 4 24 & 30 Assembled Heads & Mounts
The Industrial Choice. Model VB Direct Drive. Model VBBD Belt Driven VANEAXIAL FANS. Direct Drive & Belt Driven Model VB / VBBD
The Industrial Choice. Model VB Direct Drive Model VBBD Belt Driven VANEAXIAL FANS Direct Drive & Belt Driven Model VB / VBBD BULLETIN 466 November 2000 Contents Construction Features Belt Driven... 3
Question: Automobiles. Observations About Automobiles. Heat Engines. Heat Pumps. Question:
Automobiles 1 Automobiles 2 Question: Automobiles A car burns gasoline to obtain energy but allows some heat to escape into the air. Could a mechanically perfect car avoid releasing heat altogether? Automobiles
WESTERN PRODUCTS, P.O. BOX , MILWAUKEE, WI TRUCK MOUNT. Installation Instructions
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64090 June 2, 2004 3519 TRUCK MOUNT Installation Instructions Chevy/GMC 1500 4X4 1999 & Later Read this document before installing the
Table Fire Prevention Code Permit Requirements
Table 107.2 Fire Prevention Code Permit Requirements 1 3 4 5 Table 107.2 Permit Hourly FIRE PREVENTION FEES AND DETAILED PERMIT REQUIREMENTS Fee Fee Aerosol products, Level 2 or 3: Manufacture, store or
Flameproof Enclosures
Flameproof Enclosures The range comprises many standard sizes of enclosures manufactured in stainless steel 316L and/or in painted carbon steel. The enclosures allow for utilization of standard electrical
24V Solar Powered Explosion Proof LED Indicator Light - 20' Cord - C1D2 Panel - ATEX Zone 1, 21
24V Solar Powered Explosion Proof LED Indicator Light - 20' Cord - C1D2 Panel - ATEX Zone 1, 21 Part #: ATEX-EPSLED-80-STB-SOL-20C-C1D2-24V Page: 1 Made in Texas The ATEX-EPSLED-80-STB-SOL-20C-C1D2-24V
AKRON ELECTRIC, INC. CONDUIT PRODUCTS GR SERIES... EYS SERIES... TU SERIES... XBD-50 SERIES...
CONDUIT PRODUCTS F GR SERIES... EYS SERIES... TU SERIES... XBD-50 SERIES... 1025 Eagon St. Barberton, Ohio 44203 Ph:(330) 745-8891 Fax:(330) 745-2504 Toll Free:(800)-275-2535 06/09/03 NEW PRODUCT IN STOCK
1533 TRUCK MOUNT. Installation Instructions for Personal Plow. Chevrolet Trailblazer GMC Envoy
December 1, 2004 Lit. No. 64414 1533 TRUCK MOUNT Installation Instructions for Personal Plow Chevrolet Trailblazer 2002 2003 GMC Envoy 2002 2003 Read this document before installing the snowplow. See your
Explosion Proof LED Drop Light / Trouble Light - Low Voltage 7 Watt LED Foot Cord - 12V24V AC
Explosion Proof LED Drop Light / Trouble Light - Low Voltage 7 Watt LED - 100 Foot Cord - 12V24V AC Part #: EHL-LED-7W-100LV Page: 1 Made in the USA The EHL-LED-7W-100LV from Larson Electronics is an Explosion
Occupational Safety and Health Admin., Labor
Occupational Safety and Health Admin., Labor 1910.178 Reprints of the charts are available through the Occupational Safety and Health Administration (OSHA) Area and Regional Offices. The address and telephone
Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
156W Explosion Proof Portable LED 360 Degree Flood Low Profile Light System - 2ft - Tank Cleaning
156W Explosion Proof Portable LED 360 Degree Flood Low Profile Light System - 2ft - Tank Cleaning Part #: EPL-360-3XLP24-LED-V2-100 Page: 1 Made in Texas The EPL-360-3XLP24-LED-V2-100 Portable Explosion
Custom Shipyard Products
Custom Shipyard Products Product Design Assistance from Government and Private Shipyards Shipyard Respiratory & Confined Space Safety Do It Right The First Time Off the Shelf Or Custom Solutions The Industry
Explosion Proof & Hazardous Area Junction Boxes
CSA - Class I Div. 1 - Groups C & D * CSA - Class I Zone 1 - Groups IIA, IIB * * Applies to GUI boxes only Explosion Proof & Hazardous Area Junction Boxes Features: Heavy-duty copper free (below 0.04%)
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)
![ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)](/thumbs/86/93535574.jpg "ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)")
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit
We re Going Global ETHANOL
Technical Notes #38 We re Going Global ETHANOL What is Ethanol? Ethanol is clean-burning, high-octane alcohol-based fuel made by fermenting and distilling starch crops, such as corn or sugar cane. It can
MOUNT KIT PERSONAL PLOW. Installation Instructions CAUTION. Read this document before installing the snowplow. CAUTION
December 1, 2015 Lit. No. 78438, Rev. 01 32323-1 MOUNT KIT PERSONAL PLOW Toyota Tacoma 2005 - Installation Instructions Read this document before installing the snowplow. See your sales outlet/web site
MOUNT KIT MODEL NO. 959
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 63811, Rev. 02 November 1, 2005 63760 MOUNT KIT MODEL NO. 959 Dodge Ram 1500 4X4 2002-05 Installation Instructions Read this document
Good Enough Never Is. Plug Fan SERIES 12
Plug Fan SERIES 12 Good Enough Never Is The Hartzell Difference Combine Hartzell QUALITY with your PRODUCT for a BETTER CHOICE for your customers! GOOD ENOUGH NEVER IS. Hartzell Air Movement is the industrial
TO BE RESCINDED. 3. Wood, paper and plastic pallets, spacers or packaging materials. 4. Polymerization or other molecular rearrangements.
ACTION: Final DATE: 12/04/2017 11:40 AM 1301:7-7-21 Industrial ovens. TO BE RESCINDED (A) Section 2101 General (1) 2101.1 Scope. This rule shall apply to the installation and operation of industrial ovens
Class I Div 2 LED Pivoting Light - 4 foot 2 lamp - 2nd Gen LED T series Style - Back Mount Swivel
Class I Div 2 LED Pivoting Light - 4 foot 2 lamp - 2nd Gen LED T series Style - Back Mount Swivel Part #: HAL-48-2L-LED-BMSW-G2 Page: 1 Made in the USA The Larson Electronics HAL-48-2L-LED-BMSW-G2 Hazardous
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
Ducting & Ventilation Components
Ducting & Ventilation Components 111 Powell Road Independence, MO 64056 visit www.hemcocorp.com Phone: 816-796-2900 Fax : 816-796-3333 E-Mail : info@hemcocorp.com Exhaust Blowers are constructed of chemical
Catalog. Brochure. Baldor explosion proof AC and DC Motors. Catalog
Brochure Baldor explosion proof AC and DC Motors We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the
MOUNT KIT. Installation Instructions CAUTION. Read this document before installing the snowplow. CAUTION
August 1, 2017 Lit. No. 76734, Rev. 00 MOUNT KIT Kioti Mechron 2013 - Installation Instructions Read this document before installing the snowplow. See your sales outlet/website for specific vehicle application
4.1. Environmental Health and Safety Office (EHSO) and applicable Emory Healthcare (EHC) Safety Management
Effective Date: 12/10/14 Version: 4 Page: 1 of 15 1. PURPOSE The purpose of this program is to protect the health and safety of all Emory employees assigned to operate powered industrial trucks as prescribed
2014+ GM Truck Cat Back Exhaust Kit 4.3L/5.3L/6.2L
2014+ GM Truck Cat Back Exhaust Kit 4.3L/5.3L/6.2L Installation Instructions P/N: 620074 (99-47) 4.3L/5.3L P/N: 620080 (99-139) 6.2L 39555 Schoolcraft Rd, Plymouth MI, 48170 855.SLP.PERF 2014+ GM Truck
VANEAXIAL & TUBEAXIAL FANS
BULLETIN 482 July 2008 VANEAXIAL & TUBEAXIAL FANS Type "S" Belt Driven Featuring Welded Steel Propellers Models VSBD & TSBD Model TSBD Belt Driven Tubeaxial Type "S" Vaneaxial & Tubeaxial Fans For applications
FORD MOUNT INSTALLATION INSTRUCTIONS
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 LIT. NO. 63719 FORD MOUNT INSTALLATION INSTRUCTIONS FORD BRONCO F-150 4x4 F-250/350 4x4 and 2WD FORD SUPER DUTY 1980-1991 Model No. 1349 Read
OPERATOR S MANUAL A
OPERATOR S MANUAL 670144-A INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-18-15 1/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) (REV: A) 67 0144-A READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
D1AFF Fleet Fueling Dispensers
D1AFF Fleet Fueling Dispensers (Mechanical Register) 6102 One in a series of the finest dispensers, all designed with you in mind. Compare these features & benefits Compact D1AFF Aluminum Cabinet 1" Neptune
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
SERVICE MANUAL COMMAND CV11-16, CV , CV VERTICAL CRANKSHAFT
COMMAND CV-6, CV460-465, CV490-495 SERVICE MANUAL VERTICAL CRANKSHAFT Section CV-6 Safety and CV460-465, General Information CV490-495 Section Safety Precautions To insure safe operations please read the
B32207 UNDERCARRIAGE KIT. Parts List and Installation Instructions CAUTION. Read this document before installing the snowplow.
April 1, 2008 Lit. No. B64116, Rev. 01 Jeep Liberty B32207 UNDERCARRIAGE KIT 2004 - Parts List and Installation Instructions Read this document before installing the snowplow. See your BLIZZARD outlet/web