An operational permit is required to conduct cutting or

Transcription

1 International Fire Code Permits The following operations require an International Fire Code Permit. Permit prices vary. Permit applications are available on our web page or by visiting our Prevention Division at Pacific Highway SW, Lakewood WA Aerosol Products Amusement Buildings Aviation Facilities Carnivals and Fairs Cellulose Nitrate Film Combustible Dust Producing Operations Combustible Fibers Compressed Gases Cryogenic Fluids Cutting and Welding Dry Cleaning Plant An operational permit is required to manufacture, store or handle an aggregate quantity of Level 2 or Level 3 aerosol products in excess of 500 pounds (227 kg) net weight. An operational permit is required to operate a special amusement building. An operational permit is required to use a Group H or Group S occupancy for aircraft servicing or repair and aircraft fuel-servicing vehicles. Additional permits required by other sections of this code include, but are not limited to, hot work, hazardous materials and flammable or combustible finishes. An operational permit is required to conduct a carnival or fair. An operational permit is required to store, handle or use cellulose nitrate film in a Group A occupancy. An operational permit is required to operate a grain elevator, flour starch mill, feed mill, or a plant pulverizing aluminum, coal, cocoa, magnesium, spices or sugar, or other operations producing combustible dusts. An operational permit is required for the storage and handling of combustible fibers in quantities greater than 100 cubic feet. An operational permit is required for the storage, use or handling at normal temperature and pressure (NTP) of compressed gases in excess of the amounts listed in Table An operational permit is required to produce, store, transport on site, use, handle or dispense cryogenic fluids in excess of the amounts listed in Table An operational permit is required to conduct cutting or welding operations within the jurisdiction. An operational permit is required to engage in the business of dry cleaning or to change to a more hazardous cleaning solvent used in existing dry cleaning equipment.

2 Exhibits and Trade Shows Explosives Fire Hydrants and Valves Flammable and Combustible Liquids An operational permit is required to operate exhibits and trade shows. An operational permit is required for the manufacturing, storage, handling, sale or use of any quantity of explosives, explosive materials, fireworks or pyrotechnic special effects within the scope of Chapter 33. An operational permit is required to use or operate fire hydrants or valves intended for fire suppression purposes which are installed on water systems and accessible to a fire apparatus access road that is open to or generally used by the public. An operational permit is required: 1. To use or operate a pipeline for the transportation within facilities of flammable or combustible liquids. This requirement shall not apply to the off-site transportation in pipelines regulated by the Department of Transportation (DOT) nor does it apply to piping systems. 2. To store, handle or use Class I liquids in excess of 5 gallons (19 L) in a building or in excess of 10 gallons (37.9 L) outside of a building, except that a permit is not required for the following: 2.1. The storage or use of Class I liquids in the fuel tank of a motor vehicle, aircraft, motorboat, mobile power plant or mobile heating plant, unless such storage, in the opinion of the code official, would cause an unsafe condition The storage or use of paints, oils, varnishes or similar flammable mixtures when such liquids are stored for maintenance, painting or similar purposes for a period of not more than 30 days. 3. To store, handle or use Class II or Class IIIA liquids in excess of 25 gallons (95 L) in a building or in excess of 60 gallons (227 L) outside a building, except for fuel oil used in connection with oil-burning equipment. 4. To store, handle or use Class IIIB liquids in tanks or portable tanks for fueling motor vehicles at motor fueldispensing facilities or where connected to fuel-burning equipment. Exception: Fuel oil and used motor oil used for space heating or water heating. 5. To remove Class I or II liquids from an underground storage tank used for fueling motor vehicles by any means other than the approved, stationary on-site pumps normally used for dispensing purposes. 2

3 Hazardous Materials HPM Facility High Piled Storage Hot Work Operations 6. To operate tank vehicles, equipment, tanks, plants, terminals, wells, fuel-dispensing stations, refineries, distilleries and similar facilities where flammable and combustible liquids are produced, processed, transported, stored, dispensed or used. 7. To place temporarily out of service (for more than 90 days) an underground, protected above-round or above-ground flammable or combustible liquid tank. 8. To change the type of contents stored in a flammable or combustible liquid tank to a material that poses a greater hazard than that for which the tank was designed and constructed. 9. To manufacture, process, blend or refine flammable or combustible liquids. 10. To engage in the dispensing of liquid fuels into the fuel tanks of motor vehicles at commercial, industrial, governmental or manufacturing establishments. 11. To utilize a site for the dispensing of liquid fuels from tank vehicles into the fuel tanks of motor vehicles, marine craft and other special equipment at commercial, industrial, governmental or manufacturing establishments. An operational permit is required to store, transport on site, dispense, use or handle hazardous materials in excess of the amounts listed in Table An operational permit is required to store, handle or use hazardous production materials. An operational permit is required to use a building or portion thereof as a high-piled storage area exceeding 500 square feet. An operational permit is required for hot work including, but not limited to: 1. Public exhibitions and demonstrations where hot work is conducted. 2. Use of portable hot work equipment inside a structure. Exception: Work that is conducted under a construction permit. 3. Fixed-site hot work equipment such as welding booths. 4. Hot work conducted within a wildfire risk area. 5. Application of roof coverings with the use of an open-flame device. 6. When approved, the fire code official shall issue a permit to carry out a hot work program. This program allows approved personnel to regulate their facility s hot 3

4 Industrial Ovens Lumber Yards and Woodworking Plants Liquid or Gas Fueled Vehicles or Equipment in Assembly Buildings Liquid Petroleum Gas Magnesium Miscellaneous Combustible Storage Open Flames and Candles Organic Coatings Places of Assembly Private Fire Hydrants Pyrotechnic Special Effects Material work operations. The approved personnel shall be trained in the fire safety aspects denoted in this chapter and shall be responsible for issuing permits requiring compliance with the requirements found in Chapter 26. These permits shall be issued only to their employees or hot work operations under their supervision. An operational permit is required for operation of industrial ovens regulated by Chapter 21. An operational permit is required for the storage or processing of lumber exceeding 100,000 board feet. An operational permit is required to display, operate or demonstrate liquid- or gas-fueled vehicles or equipment in assembly buildings. An operational permit is required for: 1. Storage and use of LP-gas. Exception: A permit is not required for individual containers with a 500-gallon (1893 L) water capacity or less serving occupancies in Group R Operation of cargo tankers that transport LP-gas. An operational permit is required to melt, cast, heat treat or grind more than 10 pounds (4.54 kg) of magnesium. An operational permit is required to store in any building or upon any premises in excess of 2,500 cubic feet (71m3) gross volume of combustible empty packing cases, boxes, barrels or similar containers, rubber tires, rubber, cork or similar combustible material. An operational permit is required to use open flames or candles in connection with assembly areas, dining areas of restaurants or drinking establishments. An operational permit is required for any organiccoating manufacturing operation producing more than 1 gallon (4 L) of an organic coating in one day. An operational permit is required to operate a place of assembly. An operational permit is required for the removal from service, use or operation of private fire hydrants. Exception: A permit is not required for private industry with trained maintenance personnel, private fire brigade or fire departments to maintain, test and use private hydrants. An operational permit is required for use and handling of pyrotechnic special effects material. 4

5 Pyroxylin Plastics Refrigeration Equipment Repair Garages and Motor Fuel- Dispensing Facilities Spraying or Dipping Storage of Scrap Tires and Tire Byproducts Temporary Membrane Structures and Tents Tire Rebuilding Plants Waste Handling Wood Products An operational permit is required for storage or handling of more than 25 pounds (11kg) of cellulose nitrate (Pyroxylin) plastics and for the assembly or manufacture of articles involving Pyroxylin plastics. An operational permit is required to operate a mechanical refrigeration unit or system regulated by Chapter 6. An operational permit is required for operation of repair garages and automotive, marine and fleet motor fueldispensing facilities. An operational permit is required to conduct a spraying or dipping operation utilizing flammable or combustible liquids or the application of combustible powders regulated by Chapter 15. An operational permit is required to establish, conduct or maintain storage of scrap tires and tire byproducts that exceeds 2,500 cubic feet (71m3) of total volume of scrap tires and for indoor storage of tires and tire byproducts. An operational permit is required to operate an airsupported temporary membrane structure or a tent having an area in excess of 400 square feet. Exceptions: 1. Tents used exclusively for recreational camping purposes. 2. Tents open on all sides, which comply with all of the following: 2.1. Individual tents having a maximum size of 700 square feet The aggregate area of multiple tents placed side by side without a fire break clearance of not less than 12 feet (3658 mm) shall not exceed 700 square feet total A minimum clearance of 12 feet to structures and other tents shall be provided. An operational permit is required for the operation and maintenance of a tire-rebuilding plant. An operational permit is required for the operation of wrecking yards, junk yards and waste material-handling facilities. An operational permit is required to store chips, hogged material, lumber or plywood in excess of 200 cubic feet. 5