DFX-MM series. High-end Ultrasonic Flow Meter for Liquid Hydrocarbons Custody Transfer. 32 beams for ultimate performance. L002G DFX-MM leaflet

Transcription

1 series Highend Ultrasonic Flow Meter for Liquid Hydrocarbons Custody Transfer 0/0/009 Page L00G leaflet 3 beams for ultimate performance

2 Features & benefits Performance Applications FSO's & FPSO's custody transfer (Crude oil) A master meter class UFM exceeding current On and Offshore allocation metering (Crude standards from Naphtas / Condensates / Liquid oil, condensates) gases to Heavy crudes / Fuel oils Pipeline metering stations (Crude Oil, Refined Superior linearity and repeatability thanks to products) unequalled spatial coverage and ultrafast Tanker loading / offloading terminals (Crude scanning rate Oil, Refined products, Petrochemicals) Compliant with OIML R7 class 0.3, M.I.D. Storage management (Crude Oil, Refined 004//EC and API MPMS Ch5.8 products, Petrochemicals) Truly Provable with standard turbine prover loops Design 3beams protected design Transit time operating principle Unique.5 axial symetry with excentration design for really much less sensitivity to flow profile disturbances Small volume transducers cavities minimize the scaling effects and avoid gas pockets Installation Reduced straight runs installation possible Compact integrated electronics for easy site commissioning and startup Communication High integration to common flow computers. Secure ethernet communication HTMLbased configuration and auditing software with open communication protocol for online remote technical support Powerfull flow imaging capability Service Ultrasonic paths redundancy allows scheduled Transducers exchangeable without recalibrating the meter 0/0/009 Page L00G leaflet site maintenance and downtime reduction.

3 Performance comparison with other UFM's Typical Meter Factor v/s Reynolds Number for different UFM patterns.,00,05 3beam s DFX m et er 8'' 4beam s par allel UFM 8'' Star UFM 8" Helical tur bine m eter,00 Meter Factor,005,000 0,995 0,990 0,985 0, Reynolds Number is the only UFM with a stable meter factor over a wide Reynolds range and therefore is ideal for multiproduct pipelines and crude oils with viscosity variation. Proving volume comparison with other UFM's Recommended P rove Volume v/s Met er S iz e API MPMS cha pte r 58 re comme nda tion Conve ntiona l UFM # Conve ntiona l UFM # proving re quire me nts Met er S iz e ( inch ) requires much less prove volume than other UFM's and therefore is truly provable with standard turbine prover loops where other UFM's definitively should be proved by master meter method. 0/0/009 Page3 L00G leaflet P rover Volume ( m3 ) 00

4 Calibration curves 08'' : baselines Flowstraightener 7 D long, ball prover volume 0m3,00 JET FUEL 5,0 cst 7 C Water 6% JET FUEL 4,5 cst 4 C JET FUEL 4,5 cst 4 C Ball valve 40% closed GASOIL 8,4 cst 8 C GASOIL 8,4 cst 8 C Ball valve 40% closed OIL 5,5 cst C OIL 6,0 cst 6 C Same oil, no flow conditioner,009,008,007,006,005 Meter Factor,004,003,00,00,000 0,999 0,998 0,997 0,996 0,995 0,994 0,993 0,99 0,99 0, Flowrate 08'' : baselines v/s Reynolds Number Flowstraightener 7 D long, ball prover volume 0m3,00 JET FUEL 5,0 cst 7 C Wat er 6% JET FUEL 4,5 cst 4 C JET FUEL 4,5 cst 4 C Ball v alv e 40% closed GASOIL 8,4 cst 8 C GASOIL 8,4 cst 8 C Ball valve 40% closed OIL 5,5 cst C OIL 6,0 cst 6 C Sam e oil, no f low c ondit ioner,009,008,007,006,005,003,00,00,000 0,999 0,998 0,997 0,996 0,995 0,994 0,993 0,99 0,99 0, Reynolds Number sustains a premium +/ 0.0 % accuracy with a constant KFactor over a wide range of viscosities and of operating conditions. 0/0/009 Page4 L00G leaflet Meter Factor,004

5 Calibration curves DFXMM 0 6 HEAVY OIL DFXMM 0 8 REP EAT ABILIT Y t est,00 METE R FACTOR 0,04% 0,0% 0,00% 0,0%,0 0,00 0 0,99 9 0,04% 0,06% RUN n is provable with standard ball provers thanks to repeatability improved by its unequal spatial coverage and ultrafast scanning rate. 0, FLOWRATE M3/H accurately measures viscous flows and therefore is ideal when pressure drop is the concern. Software interfacing is easy and cost effective thanks to its Web server and Ethernet link, making skid commissioning, meter health check and auditing operations straightforward. 0/0/009 Page5 L00G leaflet METER ERROR % 300 cent is t ocke s mineral oil, 6'' PD mas t er met er Dies el oil 4.9 cs t m 3/h 0 m3 ball prover 5 runs 0,06%

6 Performances & datas Nominal flowranges for st andard accuracy +/0,5% mm Flow rat e (m3/h) Min. Flow rat e (BPH) Max. Min. Me t e r siz e Max. Inch Flow rat e (m3/h) mm Flo w rat e (BPH) M in. M ax. M in. M ax " * " * " " " " " " " " " " " " " " " " " " " " " " " " " 34" " " " " " " " " " " * 5 beams des ign Lengt h & Weight * Met er siz e Inch mm Met er lengt h Inch mm Weight (Kg) # 50 # # Weight (lb) #9 0 0 # 50 # # # 900 4'' '' '' '' '' '' '' '' '' '' '' '' '' '' '' '' '' '' '' N ot e : g i ve n le n g t h a re for fa ce t o fa ce fl a n g e s 0/0/009 Page6 L00G leaflet Met er siz e Inch No minal flowranges f or premium accuracy +/0,%

7 Specifications METROLOGY Compliances : Accuracy : Repeatability : OIML R7 class 0.3 API MPMS ch5.8 M.I.D. 004//EC +/ 0,5% from 0.5 to m/s +/ 0,0% from to 0 m/s provable, 0.05% 5 runs with conventional prover loops Installation : 0D upstream with recommended flow conditionner + 3D downstream CERTIFICATIONS Safety : pressure : Metrology : Environment : Ingress protection : ENVIRONMENT Temperature : Pressure : Viscosity : compliant with all relevant European Community standards ATEX 94/9/EC II G Exd IIB T6 P.E.D. 97/3/EC ASME B3.3 OIML R7 (PTB , Gosstandart) E.M.C 89/336/EC I.P. 66/67 IEC59 process : 55 C to + 0 C Ambient: 55 C to + 55 C Up to 00 bar 0. to centistockes please consult M&T for higher viscosities Density : 400 to 500 kg/m3 Materials : Carbon steel, Low temp carbon steel, Stainless steel, Duplex Flanges : ANSI #50 #300 # Internal : full bore BODY CONVERTER Power supply : Pulse volume output : Communication port : Protocols : 0 / 0 VAC 50/60 Hz or 8 / 3 VDC, 0W, isolation 500V two static relays V 0.A isolation 5000V 0/00BaseT IEEE 80.3 Ethernet link RJ45, optional Wifi 80. b & g, optical fiber, RS485 HTTP, HTTPs, Telnet, SNMP, Modbus TCP 0/0/009 Page7 L00G leaflet Please contact M&T for specifications outside above standard ones

8 Ordering codes A B C D E F G H A 0 Sect ion A : Product line Sect ion E : Inst allat ion condit ions Sect ion B : Meter Size Standard with recommended flow straightener Standard without flow straightener 3 Customized 04 4'' / DN '' / DN '' / DN '' / DN50 '' / DN300 standard +/0.5% 4 4'' / DN premium +/0.% 6 6'' / DN '' / DN '' / DN500 0 None 4 4'' / DN Standard Customized Sect ion F : Accuracy class Sect ion G : Document at ion Sect ion C : Pressure Class Sect ion H : Special request A 50 # ANSI R.F. Flanges B 300# ANSI R.F. Flanges 0 None C # ANSI R.F. Flanges S Spe cial request D Other (please contact us ) Sect ion D : Mat erials of const ruct ion Body Flanges Trans ducers C.S A06 or equ. C.S A05 or equ. Peek / SS 36L L.T.C.S. A333 Gr6 or equ. L.T.C.S. A LF or Peek / SS 36L equ. 3 SS 36L or equ. SS 36L or equ. Peek / SS 36L 4 Other Other Peek / SS 36L Ordering contacts Address : Parc des Propylées II 5, Allée Prométhée 0 CHARTRES FRANCE Tel: Fax: E.mail : Web : +33 (0) / (0) info@mntsas.com METERING & TECHNOLOGY S.A.S. S.A.S. au capital de R.C.S Chartres TVA FR Parc des Propylées II 5, Allée Prométhée 0 CHARTRES FRANCE Tel:+33(0) / Fax:+33(0) info@mntsas.com 0/0/009 Page8 L00G leaflet METERING & TECHNOLOGY S.A.S.