MIB 303 AC Separation System, Module. System Reference. Product No Aug V1. Printed Book No. Alfa Laval Marine & Power
|
|
- Theodore Freeman
- 6 years ago
- Views:
Transcription
1 MIB 303 AC Separation System, Module System Reference Product No Printed Book No. Aug V1 Alfa Laval Marine & Power
2 Alfa Laval reserve the right to make changes at any time without prior notice. Any comments regarding possible errors and omissions or suggestions for improvement of this publication would be gratefully appreciated. Copies of this publication can be ordered from your local Alfa Laval company. Published by: Alfa Laval Separation AB Marine & Power Division S Tumba Sweden Copyright Alfa Laval Separation AB 1997.
3 Contents 1 Technical Data Separation System Separator Counter Pressure in Oil Outlet Determining max. counter pressure in oil outlet, lube oil Viscosity/Temperature Diagram Viscosity/Counter Pressure Diagram. 5 2 Drawings Assembly Drawings Assembly Drawing Basic Size Interconnection and Circuit Diagrams Cable List Starter/Control Unit Interconnection Diagram Starter/Control Unit Circuit Diagram
4
5 1 Technical Data 1.1 Separation System Separator Application MIB 303 S-13/S-33 Cleaning of oil used for marine and power diesel engines, with a maximum density of 920 kg/m 3 at 15 C. Cleaning of steam turbine lubricating oil. Capacity and separation temperature Viscosity cst/40 C Max. rec. capacity l/h Max. separation temp. C Lube oil l/h at 50Hz 360 l/h at 60Hz 70 Marine diesel oil l/h at 50 Hz 760 l/h at 60 Hz 40 Sealing Water Normal working counter pressure Maximum counter pressure Low pressure switch set point Total power consumption Temperature Maximum hardness Minimum ph value Salinity kpa See diagrams on pages 4 and 5 30 kpa Max. 700 W 5 70 C 180 ppm (CaCO 3 10 dh) 6 maximum 60 ppm chloride (equivalent to 100 ppm NaCl)
6 1 Technical Data MIB 303 AC System Reference Shipping data Net weight Gross weight kg kg Volume 0.58 m 3 Manufacturing materials Separator Frame Separator Bowl Module Frame aluminium alloy aluminium and plastics iron 1.2 Separator 50 Hz 60 Hz Speed Drive motor 7300 rpm 7300 rpm Bowl spindle max rpm 7300 rpm Miscellaneous Starting time max. Stopping time with built-in electric brake max. Maximum operating time without oil feed Motor power seconds minute minutes W Bowl data Sludge space 0.3 litres
7 MIB 303 AC System Reference 1 Technical Data 1.3 Counter Pressure in Oil Outlet Determining max. counter pressure in oil outlet, lube oil To determine the max. counter pressure in the oil outlet, e.g in cases of high delivery height, first measure the working temperature in the actual lube oil. Refer to Viscosity/ Temperature Diagram on page 4 to determine the oil viscosity at working temperature. Viscosity/Counter Pressure Diagram. on page 5 gives the max. value in kpa of the counter pressure suitable for this viscosity and flow. If a higher counter pressure is applied, the separator will overflow. Example: ISO VG 68 is to be used at separation temperature 65 C. The Viscosity/ Temperature diagram on page 4 gives a viscosity of 24 cst. This is used to determine the max. counter pressure in the oil outlet with the help of the Viscosity/Counter Pressure diagram on page 5. In this case 89 kpa for a flow of 380 l/h, and 72 kpa for a flow of 450 l/h
8 1 Technical Data MIB 303 AC System Reference Viscosity/Temperature Diagram P003083A The shaded area shows the relevant working intervals
9 MIB 303 AC System Reference 1 Technical Data Viscosity/Counter Pressure Diagram. P003084A The shaded area shows the relevant working intervals
10 1 Technical Data MIB 303 AC System Reference
11 2 Drawings 2.1 Assembly Drawings
12 2 Drawings MIB 303 AC System Reference Assembly Drawing X005539A Ref Rev
13 MIB 303 AC System Reference 2 Drawings Item Description Legend Flow 201 Oil inlet 220 Clean oil outlet 221 Water outlet (to collecting tank) 440 Water for water seal 460 Drain 540 Ventilation XS2 Emergency stop (optional) Wheel set (optional) A Sealed with LOCTITE 542 B Only for 24V DC separator Basic Equipment Item Description Qty. Article no. 1 Separator MIB 303 S-13/S Starter/control unit Funnel complete (Purifier only) Pump incl. motor and capacitor; According to order 4 Pump incl. motor and capacitor; According to order Nipple Outlet piece with pressure switch Frame Pipe bend Nipple Quick-coupling with non-return valve (Purifier only) Level switch Strainer Flexible hose Ball valve
14 2 Drawings MIB 303 AC System Reference Item Description Qty. Article no. 15 Angular nipple Ball valve Product label Gasket Rectangular ring Screw Nut Washer Nipple Non-return valve Label IN Label OIL Label OUT Protection plug Protection plug Cable protection Drive screws T-pipe Support for funnel Tool box Cable for pump motor Ancillary kit
15 MIB 303 AC System Reference 2 Drawings Basic Size X00178BA Ref Rev
16 2 Drawings MIB 303 AC System Reference 2.2 Interconnection and Circuit Diagrams Cable List No. Type Connection point A Instruction Connection point B Remarks 1 RCOP 3 x 1.5 Mains supply Starter/CU Max. fuse 10 A 3 9 x 1.5 Separator Starter/CU Supplied with separator 4 RADOX RADOX RADOX x 0.75 Starter/CU Level switch 3 x 0.75 Starter/CU Pressure switch 3 x 0.75 Starter/CU Feed pump Other equivalent and approved cables may be used
17 MIB 303 AC System Reference 2 Drawings Starter/Control Unit Interconnection Diagram X004945A Ref Rev
18 2 Drawings MIB 303 AC System Reference Starter/Control Unit Circuit Diagram X006041A Ref Rev
19 MIB 303 AC System Reference 2 Drawings Circuit Diagram Description Item A B C D E F G H I Description Feed pump Separator Cover interlock Level switch (optional) Pressure switch (optional) Secondary power supply (optional) Insulation transformer (optional) Primary power supply 230V 50/60 Hz, fuse 10 A Remote alarm
20 2 Drawings MIB 303 AC System Reference
Operating Instructions
MIB 303 Separation System, Module Operating Instructions Printed Book No. Aug 1997 1810594-02 V1 Alfa Laval Marine & Power Alfa Laval reserve the right to make changes at any time without prior notice.
More informationAlarms and Fault Finding
MIB 303 Separation System Alarms and Fault Finding Printed Book No. Aug 1997 1810595-02 V1 Alfa Laval Marine & Power Alfa Laval reserve the right to make changes at any time without prior notice. Any comments
More informationIstruzioni di installazione versione MIB303 Anno 2013
Naval & Industrial Products Service & Maintenance - Spare Parts Surveying Services Kto Supply Sas Via Vassallo 10 IT16146 Genoa Ph. +39 010 8681941 info@cappato.net - www.cappato.net Componenti oggetto
More information8 Technical Reference
8 Technical Reference Contents 8.1 Technical data 122 8.2 Connection list 125 8.3 Interface description 126 8.3.1 General 126 8.3.2 Definitions 126 8.3.3 Component description and signal processing 127
More informationACD6. Std Line. Product Description. Max differential pressure: 7 bar Circulation, lubrication and transfer ACD GB
ACD6 Std Line Product Description Flow volume: 10-42 l/min Max differential pressure: 7 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACD pumps come in two
More informationACG7. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACG GB
ACG7 Std Line Product Description Flow volume: 80-1200 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
More informationLPE3. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer LPE GB
LPE3 Std Line Product Description Flow volume: 10-180 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
More informationPneumatech. Heatless adsorption compressed air dryers PH 55 HE, PH 65 HE, PH 75 HE, PH 105 HE, PH 130 HE, PH 150 HE, PH 170 HE, PH 210 HE, PH 310 HE
Pneumatech Heatless adsorption compressed air dryers PH 55 HE, PH 65 HE, PH 75 HE, PH 105 HE, PH 130 HE, PH 150 HE, PH 170 HE, PH 210 HE, PH 310 HE Parts list Pneumatech Heatless adsorption compressed
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
More informationAGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00 205 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
More informationFlow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer
Std Line ACE3 Screwpump Series Product description Flow volume: 15-180 l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer The Std Line (standard) ACE pumps come
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACF GB
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACF pumps are used
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
More informationSection 5. Engine data. Engines for power generation. 12-series. Contents. Industrial & Marine Engines. Edition 2007:1
Edition 2007:1 Industrial & Marine Engines Section 5 Engine data Engines for power generation Contents General information... 3 Engine program... 4 Basic data... 6 Technical data and cooling equipment
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
More informationWasher-Extractor Cabinet Freestanding
Washer-Extractor Cabinet Freestanding Refer to Page 3 for Model Numbers Parts CFD22C_D0045 www.comlaundry.com Part No. D0045R3 July 2011 Table of Contents Title Page Parts Ordering Information... 2 Nameplate
More informationACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer ALSO VALID FOR PUMP SERIES UCF Generation 5 1. Applications
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 076 203 PERFORMANCE CURVES 106 204 - CONSTRUCTIONS 300 SECTIONAL
More informationPRA EBAR. RA Pumps Europe S.p.A. CENTRIFUGAL PUMPS CONTENTS. 60Hz. Page - SPECIFICATIONS
CONTENTS Page SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 203 CONSTRUCTIONS SECTIONAL VIEW MECHANICAL SEAL (UP TO 0.75 kw) MECHANICAL
More informationMOPX 213TGT-20. Separator Manual. Product No whatsapp:
A L F A L A V A L S E P A R A T I O N MOPX 213TGT-20 Separator Manual Product No. 881039-04-02 Book No. 1270763-02 V2 Alfa Laval Separation AB Separator Manuals, dept. SKEL S-147 80 Tumba, Sweden Telephone:
More informationSpare parts list. Petrol Breakers CP Rail.
Petrol Breakers CP Rail Valid from serial number BES047029 Valid to serial number BES999999 www.cp.com CP Road Spare parts list General information This spare parts list applies to the following: Part
More informationDDA AR-PVC/V/C with access.
GRUNDFOS DATA BOOKLET DDA 7.5-16 AR-PVC/V/C with access. Grundfos pump 97974077 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/ddafam/97974077/dda-7-5-16-with-access.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
More informationMOPX 205 TGT-24. Separator Manual. Product No Movil:
A L F A L A V A L S E P A R A T I O N MOPX 205 TGT-24 Separator Manual Product No. 881034-01-08 Book No. 1270366-02 V2 Alfa Laval Separation AB Separator Manuals, dept. SKL S-147 80 Tumba, Sweden Telephone:
More informationBUILD-UP OF INSOLUBLE IN FOUR STROKE ENGINE SYSTEM OIL
CASE STUDY 2 BUILD-UP OF INSOLUBLE IN FOUR STROKE ENGINE SYSTEM OIL Figure 1: Lube oil treatment system A ship has 4 stroke engine diesel generators of 1500 kw, using 600 cst heavy fuel oil. The generator
More informationVZ-01. Features. Oil Counter for Light to Heavy Fuel Oil. Description: Application: / Mounting on pressure or suction side
VZ-01 Oil Counter for Light to Heavy Fuel Oil Description: Features / Mounting on pressure or suction side The VZ-01 series of volume counters are rotary piston meters that function without auxiliary electrical
More informationFlow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationPressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationCompany name: Created by: Phone:
Qty. 1 MAGNA3 D -6 Date: 6/3/217 Product No.: 9792445 With its unrivalled efficiency, all-encompassing range and built-in communication capabilities, the MAGNA3 is ideal for engineers and specifiers looking
More informationLPE4. OptiLine. Product Description. Max differential pressure: 16 bar LPE GB
LPE4 OptiLine Product Description Flow volume: 8-175 l/min Max differential pressure: 16 bar Applications: Circulation and transfer 1. Applications 1.1 Functionality The LPE OptiLine pump is used for a
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 PERFORMANCE CURVE 1.50 205 PERFORMANCE CURVE 2.00 206
More informationAlfa Laval three-screw pump
Alfa Laval three-screw pump Alfa Laval 3S pumps The 3S series is characterised by an innovative design for long service life, even in harsh operating conditions. The thoroughly engineered 3S series is
More informationLK Manifold Shunt VS2
LK Manifold Shunt VS2 Design LK Manifold Shunt VS2 is a shunt unit with a two way control valve used in systems with a primary pump. The shunt unit is mountable from both the left and right of LK Manifolds.
More informationSpare parts list. Centrifugal pumps CP
Spare parts list Centrifugal pumps CP 000 www.cp.com CP 000 9800 0 0a CP 000 Contents Contents General information............................................................... Spare parts list....................................................................
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
More informationParts List Book CPE CPVS
Code 2205 6010 04 Edition 08/2013 Oil-injected Rotary Screw Compressors Parts List Book CPE125-1 CPVS125-1 People.Passion.Performance. CONTENTS WARRANTY AND LIABILITY LIMITATION... 2 ORDERING SPARE PARTS...
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
More informationScrewpump Series ACD
Screwpump Series ACD Product description Flow volume: 11-45 l/min Max differential pressure: 7 bar Applications: Lubrication, circulation and transfer ACD 1116 GB IMO AB, Telephone: + 46 8 50 622 800,
More informationdevatec Bel of mail voor prijzen Januari 2014 CMC ELMC SERIES MC2 HLK KIT MC ELMC2 SERIES MC Elektra +Elektronica Waterzijdig Accessories
devatec ELMC SERIES MC2 CMC ELMC2 SERIES MC HLK KIT MC Waterzijdig Elektra +Elektronica Bel of mail voor prijzen Januari 2014 Accessories Spares for cleanable cylinder Hydraulical part CYLINDER MAINTENANCE
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationSIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
More informationWasher-Extractor Cabinet Freestanding
Washer-Extractor Cabinet Freestanding Refer to Page 3 for Model Numbers Parts CFD12C_D0248 www.comlaundry.com Part No. D0248R3 February 2012 Table of Contents Title Page Parts Ordering Information...
More informationPeerless Pump FIRE PUMPS. Horizontal Split-Case, Vertical Turbine, In-Line and End Suction. Sterling Fluid Systems (USA), Inc.
Peerless Pump FIRE PUMPS Split-Case, Vertical Turbine, In-Line and End Suction Sterling Fluid Systems (USA), Inc. Brochure B-1500 Fire Protection Fire Pump Units & Packaged Systems You have decided to
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS
CENTRIFUGAL PUMPS CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 PERFORMANCE CHART CMA 0.50 203 PERFORMANCE CHART CMA 0.75 204 PERFORMANCE CHART CMA 0.80 205 PERFORMANCE CHART
More informationACCESSORIES. Ball Vibrators, JM Series 3 Turbine Vibrators, JMT Series 5 Visual Indicators 7 Distribution Manifolds 9
Ball Vibrators, JM Series 3 Turbine Vibrators, JMT Series 5 Visual Indicators 7 Distribution Manifolds 9 1 2 BALL VIBRATORS JM SERIES General Information 1 Minimum operating pressure 2 bar (30psi). 2 Max
More informationSummary Report for Individual Task L-3048 Troubleshoot a Purifier Status: Approved
Report Date: 30 Apr 2012 Summary Report for Individual Task 551-88L-3048 Troubleshoot a Purifier Status: Approved DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. DESTRUCTION
More information- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 PERFORMANCE CURVE 1.50 205 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE CURVE 400 206 - CONSTRUCTIONS
More informationSIHI LPH-X - Liquid Ring Vacuum Pump One Stage
- Liquid Ring Vacuum Pump One Stage LPH 40106, LPH 40411, LPH 40516 Pressure Range: Suction Range: 150 to 1013 mbar 50 to 270 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but
More informationTEAMTEC INCINERATORS Market leaders since More than units sold worldwide
TEAMTEC INCINERATORS Market leaders since 1972 - More than 11 000 units sold worldwide OG120C. Capacity: 190.000 kcal/h (220 kw). TEAMTEC Incinerator model OG120C The smallest incinerator in our range.
More informationFOPX 609TFD-24. Separator Manual. Product No
A L F A L A V A L S E P A R A T I O N FOPX 609TFD-24 Separator Manual Product No. 881244-02-03 Book No. 1270843-02 V1 Alfa Laval Separation AB Separator Manuals, dept. SKL S-147 80 Tumba, Sweden Telephone:
More informationCM5-5 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686818 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686818/cm5-5-a-r-a-e-avbe.html
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationIMO REVIEW OF MEPC.1/CIRC.511 AND RELEVANT MARPOL ANNEX I AND ANNEX VI REQUIREMENTS. Comments on the Report of the Correspondence Group
INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON SHIP DESIGN AND EQUIPMENT 51st session Agenda item 18 DE 51/18/3 27 December 2007 Original: ENGLISH REVIEW OF MEPC.1/CIRC.511 AND RELEVANT MARPOL
More informationChicago Pneumatic Oil-injected rotary screw air compressors
Chicago Pneumatic Oil-injected rotary screw air compressors CPA 7.5, CPA 10, CPA 15, CPA 20 Parts list 2014 05 Chicago Pneumatic 2 2205 7115 24 Chicago Pneumatic Oil-injected rotary screw air compressors
More informationLHD. Spare parts list 23 M. Rock drills Construction Tools PC AB No
LHD 23 M Spare parts list Rock drills 2015 Construction Tools PC AB No. 3392 5014 01 2015-06 General information This spare parts list applies to the following: Part number Description 1801 3800 01 (clockwise
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
More information- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
More informationScrewpump. Series D GB. General Description. Model Code D 4
Screwpump Series D4 A Member of the COLFAX PUMP GROUP Handling of hydraulic oils, seal oils and fuel oils Max. working pressure: 160 bar Flow range: 10-850 I/min General Description Positive constant displacement,
More informationCM5-5 A-R-A-E-AVBE C-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE C-A-A-N Grundfos pump 9686813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686813/cm5-5-a-r-a-e-avbe.html
More informationFirst opening kit for : First opening kit for : Maintenance kit for : Maintenance kit for :
devatec HUMIDIFIFICATION Rue Feu St Eloi - 76550 Ambrumesnil ELMC SERIES MC2 EL2S ELMC2 SERIES MC CMC HLK KIT MC Electrical part & electronics Accessories January 2011 Tel : +33 (0) 2 35 04 61 41 www.devatec.com
More informationWATER TREATMENT COMPONENTS. Residential R.O. components
WATER TREATMENT COMPONENTS Residential R.O. components 1,8 Residential CSM Membranes 2017 10-01-01-EN 1,8 Residential CSM Membranes OLD MODEL NAME RE1810-30 RE1812-35 MCRE1812-50 DA050 RE1812-50 MCRE1812-60
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECNICAL DATA 500 MOTOR DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 056 203 PERFORMANCE CURVE 066 204 PERFORMANCE CURVE 086 205 - CONSTRUCTIONS 300 SECTIONAL
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL and BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE
More informationMcQuay. Water Source Heat Pump Replacement Chassis. VF Vintage H. Last Manufactured: 1992
Replacement Parts List No. 110502800 Revision A 02/2006 McQuay Water Source Heat Pump Replacement Chassis VF 100-330 Vintage H Last Manufactured: 1992 To find your Daikin Applied parts distributor, call
More informationOily Water Separators. globally focused on cleaner solutions
Oily Water Separators globally focused on cleaner solutions Oily Water Separators Victor Marine s bilge oily water separators are specifically engineered for the marine environment. Victor Marine have
More informationUPS32-60 F B 1x V PN6/10
GRUNDFOS DATA BOOLET UPS32-60 F B 1x230-240V PN6/10 Grundfos Pump 96401797 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/upsb2/96401797/ups-32-60-f-b.html
More informationConnection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
More informationSIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage LPH 45008, LPH 45311, LPH 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but
More information7. Lubricating Oil System
7.1 Lubricating oil requirements 7.1.1 Engine lubricating oil The lubricating oil must be of viscosity class SAE 40 and have a viscosity index (VI) of minimum 95. The lubricating oil alkalinity (BN) is
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
More informationBy-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
More informationO:\Machine Manuals & Spare Parts Lists\Commercial Cold Water Electrical\HD2.3-14CEd PL Page 1
HOUSING 1.0 1 5069-1210 Device cover 1 1 5069-2020 Device cover 1 2 6304-0990 Saucer-head screw M 6x 18-4.8-R2R 1 3 6310-0530 Putting nut 1 4 5050-2060 Frame front part 1 4 5050-2860 Frame front part 1
More informationH. HERMANN EHLERS GMBH
H. HERMANN EHLERS GMBH Fördern - Messen - Regeln - Dosieren - Verdichten Ingenieurbüro - Werksvertretungen Positive displacement meters series - - An der Autobahn 45 28876 Oyten Tel. 04207/91 21-0 Fax
More informationMFR35MCATS : 01 - CONTROL PANEL (MC) [1/25] Ref # Part Number Qty. Description PLATE, BACK-UP (COIN METER) PANEL, CONTROL 3
MFR35MCATS : 01 - CONTROL PANEL (MC) [1/25] Page 1 of 50 MFR35MCATS : 01 - CONTROL PANEL (MC) [1/25] Ref # Part Number Qty. Description 1 23001039 1 PLATE, BACK-UP (COIN METER) 2 23001489 1 PANEL, CONTROL
More information- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE CURVE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 076 203 PERFORMANCE CURVE 106 203 PERFORMANCE CURVE 156 203 PERFORMANCE
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationPressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
More informationkythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump
. kythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump Application LKH-110 and -120/P are highly efficient and economical multistage centrifugal pumps, which meet the requirements of sanitary
More informationCEB 71204/a of 13 december 2005 SLSHR. 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw
CEB 71204/a of 13 december 2005 SLSHR 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw C.E.B. SLSHR RANGE TECHNICAL CATALOGUE 05/12/13 CONTENTS CONTENTS 2 APPLICATIONS
More informationInstruction for RBP250-3 and RBP300-3
Framo Anti-heeling Pump 1275-0029 -401 Rev.C Instruction for RBP250-3 and RBP300-3 2 of 13 CONTENTS Page 1 General description 2 1.1 Technical data 3 2 Operating information 3 2.1 Prior to initial start
More informationASTRO ATS-12 TABBER PARTS MANUAL
ASTRO ATS-12 TABBER PARTS MANUAL This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information in this guide
More information