AIR VALVE No-lube, no-stall design. MODEL S07 Ball Valve Non-Metallic Performance Curve

Transcription

1 Quality ystem IO9 Certified Environmental Management ystem IO4 Certified 7 Non-Metallic Design Level all Valve Air-Operated Double Diaphragm ump U.. atent #,8,9;,99,27; 4,2;,24,487 Other U.. atents Applied for CE ENGINEERING, ERFORMANCE & CONTRUCTION DATA INTAKE/DICHARGE IE IZE Internal Threads External Threads ¾ NT or ½ NT or ¾ Tapered ½ Tapered CAACITY to 2 gallons per minute ( to 87 liters per minute) AIR VALVE No-lube, no-stall design OLID-HANDLING all Valve 7 - Up to. in.(4mm) Trihedral Valve 7T - Up tp.in (9.mm) Diameter or.in 2 area (.cm 2 ) HEAD U TO psi or 2 ft. of water (7 bar or 7 meters) DILACEMENT/TROKE.2 Gallon /.98 liter HEAD AR 7 4 I (7) I (.8 ar) 8 I (.44 ar) I (4.8 ar) MODEL 7 all Valve Non-Metallic erformance Curve erformance based on the following: elastomer fitted pump, flooded suction, water at ambient conditions. The use of other materials and varying hydraulic conditions may result in deviations in excess of %. 8 (.) 2 (2) (27) 2 (4) FEET NHR METER I (2.72 ar) 2 I (. ar) Air Inlet ressure U.. Gallons per minute Liters per minute CAACITY ANDIER pumps are designed to be powered only by compressed air. s7nmdlds-rev8 Model 7 Non-Metallic Design Level age

2 7 Non-Metallic erformance Curve, Trihedral Model AR 7 I (.) 4 (7) () I (.8 ar) 8 (.) (7) MODEL 7 Trihedral Valve erformance Curve erformance based on the following: elastomer fitted pump, flooded suction, water at ambient conditions. The use of other materials and varying hydraulic conditions may result in deviations in excess of %. HEAD I (.44 ar) I (4.8 ar) 4 I (2.72 ar) 2 I (. ar)air Inlet ressure 2 (2) 4 (24) (27) 8 (.4) U.. Gallons per minute NHR FEET METER Liters per minute CAACITY s7nmdlds-rev8 Model 7 Non-Metallic Design Level age 2

3 Explanation of ump Nomenclature 7 Non-Metallic Design Level all Valve Type ump rand ump ize Check Valve Type Design Level Wetted Material Diaphragm/ Check Valve Check Valve eat Non-Wetted Material orting ump tyle ump Kit hipping Weight lbs (kg) 7N. 7 N. 7 (8) 72N. 7 2 N. 7 (8) 7KKN. 7 K K N. 2 (9.) 7K2KN. 7 K 2 K N. 2 (9.) 7NNN. 7 N N N. 8 (9) 7N2NN. 7 N 2 N N. 8 (9) 7T7N. 7 T 7 N. 7 (8) 7T8N. 7 T 8 N. 7 (8) 7TN. 7 T N. 7 (8) (8) (8) 7KK. 7 K K. 2 (9.) 7K2KN. 7 K 2 K. 2 (9.) 7NN. 7 N N. 8 (9) 7N2N. 7 N 2 N. 8 (9) 7T7. 7 T 7. 2 (9.) 7T8. 7T. 7 7 T T (9.) 2 (9.) ump rand = ANDIER ump ize 7= /4" Check Valve Type = all T= Tihedral Design Level = Design Level Wetted Material K= VDF N= Nylon = olypropylene Daiphragm/Check Valve Materials = antoprene/antoprene 2= Virgin TFE-antoprene ackup/virgin TFE 7= antoprene/nitrile 8= Virgin TFE-antoprene ackup/fkm = Nitrile/Nitrile Z= One-iece onded/tfe Check Valve eat K= VDF N= Nylon = olypropylene Non-Wetted Material = olypropylene I= olypropylene with TFE Hardware orting N= NT Threads = Dual orting (NT) 2= Top Dual orting (NT) = ottom Dual orting (NT) = Threads (tapered) 4= Dual orting () (tapered) = Top Dual orting () (tapered) = ottom Dual orting () (tapered) ump tyle = tandard ump = None = ound Dampening 2= Mesh Muffl er = Metal Muffl er Kit.= None.= -VDC ulse Output Kit.= Intrinsically-afe -VDC,/2VAC, 22/24VAC ulse Output Kit 2.= /2 or 22/24VAC ulse Output Kit E.= olenoid Kit w/24vdc Coil E.= olenoid Kit 24VDC Explosion-roof Coil E2.= olenoid Kit w/24vac/2vdc Coil E.= olenoid Kit w/2vdc Explosion-roof Coil E4.= olenoid Kit w/vac Coil E.= olenoid Kit w/vac Hz Explosion-roof Coil E.= olenoid Kit w/22vac Coil E7.= olenoid Kit w/22vac Hz Explosion-roof Coil E8.= olenoid Kit w/vac Hz Explosion-roof Coil E9.= olenoid Kit w/2vac Hz Explosion-roof Coil = troke Indicator ins s7nmdlds-rev8 Model 7 Non-Metallic Design Level age

4 CAUTION! Operating temperature limitations are as follows: Operating Temperatures Materials Maximum* Minimum* antoprene : Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance. 27 F C - F -2 C Virgin TFE: Chemically inert, virtually impervious. Very few chemicals are known to react chemically with TFE: molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures. - F 4 C -7 C VDF: olypropylene: Nylon: 2 F 2 C 8 F 82 C 8 F 82 C F -8 C 2 F C 2 F C Nitrile: General purpose, oil-resistant. hows good solvent, oil, water and hydraulic fluid resistance. hould not be usedwith highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hyrdrocarbons. 9 F - F 88 C -2 C FKM (Fluorocarbon): hows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 7 F) will attack FKM. F -4 F 77 C -4 C For specifi c applications, always consult Chemical Resistance Chart Technical ulletin *Defi nite reduction in service life. **Minimal reduction in service life at ends of range. s7nmdlds-rev8 Model 7 Non-Metallic Design Level age 4

5 Dimensions: 7 Non-Metallic Dimensions in Inches Dimensional Tolerance:± /8 *Discharge ort ¾" NT (Internal) ½" NT (External) Manifold Can Rotate 9 From Vertical Centerline. tandard Encapsulated Muffler: /8" NT Exhaust ort For Optional Muffler tyles or iping Exhaust Air in ubmerged Applications. Air Inlet ¼" NT *uction ort ¾" NT (Internal) ½" NT (External) olt attern is ymmetrical About Centerlines *oth uction and Discharge orts are Available In: ¾" T (Tapered) (Internal) ½" T (Tapered) (External) DIMENION tandard ump ulse Output Kit Mesh Muffl er A 4 / 4 / /4 7 / 7 / 9 / Dimensions in Millimeters Dimensional Tolerance:± mm *Discharge ort ¾" NT (Internal) ½" NT (External) Manifold can Rotate 9 From Vertical Centerline. tandard Encapsulated Muffler: /8" NT Exhaust ort For Optional Muffler tyles or iping Exhaust Air in ubmerged Applications. Air Inlet ¼" NT *uction ort ¾" NT (Internal) ½" NT (External) olt attern Is ymmetrical About Centerlines *oth uction and Discharge orts are Available In: ¾" T (Tapered) (Internal) ½" T (Tapered) (External) R/2" 4 laces DIMENION tandard ump ulse Output Kit Mesh Muffl er A mm mm 4mm 79mm 224mm 222mm s7nmdlds-rev8 Model 7 Non-Metallic Design Level age