II 2GD b T5. AIR VALVE No-lube, no-stall design 16 (27) 18 (30) U.S. Gallons per minute. Liters per minute. Capacity

Transcription

1 Quality System ISO91 Certified Environmental Management System ISO141 Certified S5 S5 Metallic Design Level 1 all Valve U.S. Patent # 5,996,627; 6,241,487 Other U.S. Patents pplied for CE II 2GD b T5 ir-powered Double-Diaphragm Pump ENGINEERING, PERFORMNCE & CONSTRUCTION DT INTKE/DISCHRGE PIPE SIZE ½" NPT or ½ SPT (internal) 1" NPT or 1 SPT (external) CPCITY to 15 gallons per minute ( to 56 liters per minute) IR VLVE No-lube, no-stall design SOLIDS-HNDLING Up to.125 in. (3mm) HEDS UP TO 125 psi or 289 ft. of water (8.6 Kg/cm 2 or 86 meters) DISPLCEMENT/STROKE.26 Gallon /.98 liter R PSI (3.5) 4 (7) 1 PSI (6.8 ar) 6 (1) 8 (13.5) 1 (17) PSI (5.44 ar) 12 (2) 14 (24) 16 (27) Head PSI (4.8 ar) 4 PSI (2.72 ar) 2 PSI (1.36 ar) ir Inlet Pressure 18 (3) 2 (33.75) U.S. Gallons per minute FEET METERS NPSHR Liters per minute Capacity SNDPIPER pumps are designed to be powered only by compressed air. SPS5M-REV16 Model S5 Metallic Design Level 1 Page 1

2 Explanation of Pump Nomenclature S5 Metallic Design Level 1 all Valve Check Diaphragm/ Check Non-Wetted Shipping MODEL Pump Pump Valve Design Wetted Check Valve Valve Material Porting Pump Pump Kit Weight rand Size Type Level Material Materials Seat Options Options Style Options Options lbs. (kg) S51WNS. S 5 1 W N S. 15 (7) S51CTPNS. S 5 1 C T N S. 15 (7) S51EWNS. S 5 1 E W N S. 15 (7) S51NWNS. S 5 1 N W N S. 15 (7) S51XTNS. S 5 1 X T N S. 15 (7) S511WNS. S W N S. 15 (7) S512TNS. S T N S. 15 (7) S51SWNS. S 5 1 S W N S. 21 (1) S51SCTNS. S 5 1 S C T N S. 21 (1) S51SEWNS. S 5 1 S E W N S. 21 (1) S51SNWNS. S 5 1 S N W N S. 21 (1) S51SXTNS. S 5 1 S X T N S. 21 (1) S51S1WNS. S 5 1 S 1 W N S. 21 (1) S51S2TNS. S 5 1 S 2 T N S. 21 (1) S51HWNS. S 5 1 H W N S. 23 (11) S51HCTNS. S 5 1 H C T N S. 23 (11) S51HEWNS. S 5 1 H E W N S. 23 (11) S51HNWNS. S 5 1 H N W N S. 23 (11) S51HXTNS. S 5 1 H X T N S. 23 (11) S51H1WNS. S 5 1 H 1 W N S. 23 (11) S51H2TNS. S 5 1 H 2 T N S. 23 (11) Pump rand S=SNDPIPER Pump Size 5=½ Check Valve Type =all Design Level 1=Design Level Wetted Material =luminum H=Hastelloy S=Stainless Steel Diaphragm Check all Materials 1=Santoprene /Santoprene =una/una C=Viton/ PTFE E=EPDM/EPDM N=Neoprene/Neoprene X=UniRupp PTFE/PTFE 2=PTFE-Santoprene/PTFE Valve Seat =luminum C=Cast Iron H=Hastelloy S=Stainless Steel T=PTFE W=UHMW Polyethylene Non-Wetted Material =luminum Porting Options N=NPT Threads = SPT (Tapered) Threads 1= Dual Porting (NPT) (lum Only) 2= Top Dual Porting (NPT) (lum Only) 3= ottom Dual Porting (NPT) (lum Only) 4= Dual Porting (SPT) (lum Only) 5= Top Dual Porting (SPT) (lum Only) 6= ottom Dual Porting (SPT) (lum Only) Pump Style S= Standard Pump Options = 1= Sound Dampening Muffler 2= 6= Metal Muffler * Kit Options.=None P.=-3VDC P1.=Intrinsically-Safe 1-3VDC P2.=11/12 or 22/24VC P3.=Intrinsically-Safe 11/12VC P4.=Intrinsically-Safe 22/24VC E.=Solenoid Kit with 24VDC Coil E1.=Solenoid Kit with 24VDC Explosion-Proof Coil E2.=Solenoid Kit with 24VC/12 VDC Coil E3.=Solenoid Kit with 24VC/12VDC Explosion-Proof Coil E4.=Solenoid Kit with 11VC Coil E5.=Solenoid Kit with 11VC Explosion-Proof Coil E6.=Solenoid Kit with 22VC Coil E7.=Solenoid Kit with 22VC Explosion-Proof Coil SP.=Stroke Indicator Pins * Note: TEX compliant pumps must be ordered with a metal muffler SPS5M-REV16 Model S5 Metallic Design Level 1 Page 2

3 CUTION! Operating temperature limitations are as follows: Operating Temperatures Materials Maximum Minimum una N General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used with highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons. EPDM Shows very good water and chemical resistance. Has poor resistance to oil and solvents, but is fair in ketones and alcohols. Neoprene ll purpose. Resistant to vegetable oil. Generally not affected by moderate chemicals, fats, greases and many oils and solvents. Generally attacked by strong oxidizing acids, ketones, esters, nitro hydrocarbons and chlorinated aromatic hydrocarbons. 19 F -1 F 88 C -23 C 28 F -4 F 138 C -4 C 2 F -1 F 93 C -23 C Santoprene Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance. Virgin PTFE Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures. 275 F -4 F 135 C -4 C 22 F -35 F 14 C -37 C Viton Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 7 F) will attack Viton. 35 F -4 F 177 C -4 C UHMW PE 18 F 82 C Polypropylene 18 F 82 C -35 F -37 C 32 F C For specific applications, always consult The Warren Rupp Chemical Resistance Chart SPS5M-REV16 Model S5 Metallic Design Level 1 Page 3

4 Dimensions: S5 Metallic (luminum Model) Dimensions in Inches Dimensional Tolerance:± 1 /8" 4 1/ /16 5 3/4 7 1/ /16 8 3/4 Metal Muffler 3 7/16 6 7/16 Dimensions in Millimeters Dimensional Tolerance:± 3mm Metal Muffler SPS5M-REV16 Model S5 Metallic Design Level 1 Page 4

5 Dimensions: S5 Metallic (Stainless Steel & Hastelloy Models) Dimensions in Inches Dimensional Tolerance:± 1 /8" 4 1/ / /32 7 1/ / /32 Metal Muffler 3 7/16 6 7/16 Dimensions in Millimeters Dimensional Tolerance:± 3mm Metal Muffler SPS5M-REV16 Model S5 Metallic Design Level 1 Page 5