Index 2. Safety information 2. Content 2. Technical 3. Specifications 3

Transcription

1 IP K 3000K 4000K ø DRIVER DRIVER h EXCLUDED EXTERNAL Wall Ceiling 40º 10 cm 12,7 cm 150 cm 510 gr h 25º 40º 60º 120º 6 x Cree Max. Max. 1-10V Phase DMX 700 ma 16 Watt dimmable dimmable dimmable CLS LUXO 6 BASIC INDEX Manual V2.3 - July 2018 Index 2 Safety information 2 Content 2 Technical 3 Specifications 3 Installation 4 Diffusion glass 4 Lensplate replacement 5 Wiring diagram Non dim drivers 7 Wiring diagram Mains dim drivers 9 Wiring diagram 1-10V dim drivers 10 Wiring diagram DALI dim drivers 12 Wiring diagram LDC-41 dimmer 13 Accessories 14 List of symbols 15 SAFETY INFORMATION Always switch off mains power of the driver before connecting or maintaining any fixtures! Do not stare into the LED Ambiance Max. 40º Qualified technician Make sure all connectors are connected properly Use a source of AC power that complies to local electrical codes Block access below the work area when maintaining the unit Don t modify or install genuine parts on this product Don t install in a flammable or explosive area Warning! Some surfaces can be hot CONTENT h ø DRIVER EXCLUDED DRIVER EXTERNAL Wall Ceiling 40º 10 cm 12,7 cm 150 cm 510 gr h 25º 40º 60º 120º 6 x Cree IP K 3000K 4000K Max. Max. 1-10V Phase DMX 700 ma 16 Watt dimmable dimmable dimmable 2

2 TECHNICAL INSTALLATION ø 140 mm min. 100 mm 127 mm ø 127 mm 62,8 mm +20º / -20º Suspended ceiling: 100 mm space is required for ventilation DIFFUSION FILTER 1 2 Tools firm pression is not necessary. The use of your finger will be sufficient SPECIFICATIONS LED: 6 x Cree Available colours: 2700K, 3000K, 4000K Lenses: 25º, 40º, 60º and 120º Power supply: Max. 700mA Power consumption: Max. 16 Watt Housing: Aluminum brushed Weight: 510 gr IP value: IP40 IP52 (With diffusion filter) Cable length: 1,5 meter Swivel angle: +20º / -20º Measurements: ø 140 x 62,8 mm (øxh) Ambient temperature: -10º C till +40º C 3 4 * Y CLS Soft diffusion filter for Luxo 6 3 4

3 LENSPLATE REPLACEMENT Handle all parts with care during the next steps. Make sure not to touch the LEDs! Unscrew the holder of the lensplate in an upwards facing position 5 6 Make sure the lensplate falls straight over the LEDs, in the 3 indicated holes Do not use any force while setting the lensplate Following steps are on the next page 5 6

4 WIRING DIAGRAM NON DIM DRIVER CLS ND 004, non dimmable, mA driver 30 x 129,5 x 42 mm (hxwxd) CLS ND 012, non dimmable, mA driver 30 x 129 x 76 mm (hxwxd) Always use 1-2 pcs of Luxo 6 Basic on the CLS ND ~ 180 cm cable Always use 1-3 pcs of Luxo 6 Basic on the CLS ND 012 CLS ND mm 129,5 mm 76 mm CLS ND ~ 180 cm cable 129 mm CLS ND 008, non dimmable, mA driver 30 x 129,5 x 42 mm (hxwxd) Always use 1-2 pcs of Luxo 6 Basic on the CLS ND ~ 180 cm cable CLS ND mm 129,5 mm 7 8

5 WIRING DIAGRAM MAINS DIM DRIVER WIRING DIAGRAM 1-10V DIM DRIVER CLS VD 001, 1-10V dimmable, mA driver 22 x 100 x 52 mm (hxwxd) Max. 12 pieces of VD 001 on 1 CLS Dimmer electr. 1-10V Always use 1 piece of Luxo 6 Basic on the CLS VD 001 CLS MD 004, mains dimmable, mA driver 34 x 166 x 46 mm (hxwxd) 52 mm CLS VD 001 Max. 12 pieces of MD 004 on 1 CLS dimmer Jung phase-cut 100 mm 46 mm Always use 1-2 pcs of Luxo 6 Basic on the CLS MD 004 N L CLS MD 004 CLS Dimmer electr. 1-10V # V N L 80,5 mm (h) 166 mm CLS Dimmer Jung phase cut max. 270VA VAC # ,5 mm (h) 80,5 mm (w) 80,5 mm (w) CLS VD 004, 1-10V dimmable, mA driver 21 x 103 x 67 mm (hxwxd) Max. 12 pieces of VD 004 on 1 CLS Dimmer electr. 1-10V Always use 1-2 pcs of Luxo 6 Basic on the CLS VD mm CLS VD mm N L CLS Dimmer electr. 1-10V # V 80,5 mm (h) 80,5 mm (w) 9 10

6 WIRING DIAGRAM DALI DIM DRIVER CLS VD 008, 1-10V dimmable, mA driver 22 x 124 x 79 mm (hxwxd) Max. 12 pieces of VD 008 on 1 CLS Dimmer electr. 1-10V CLS DD 001, DALI dimmable, mA driver 22 x 100 x 52 mm (hxwxd) Always use 1-3 pcs of Luxo 6 Basic on the CLS VD 008 Always use 1 piece of Luxo 6 Basic on the CLS DD mm CLS DD mm CLS VD mm DA1 DA2 124 mm N L CLS Dimmer electr. 1-10V # ,5 mm (h) 0-10 V 80,5 mm (w) Controller Supporting DALI CLS DD 004, DALI dimmable, mA driver 21 x 103 x 67 mm (hxwxd) Always use 1-2 pcs of Luxo 6 Basic on the CLS DD mm CLS DD mm DA1 DA2 Controller Supporting DALI 11 12

7 WIRING DIAGRAM LDC-41 DIMMER ACCESSORIES # L-6-X-0X-2-B Channel 3 Channel 2 Channel 1 ACCESSORIES Y CLS multilens spot 25 for Luxo Y CLS multilens flood 60 for Luxo Y CLS Soft diffusion filter for Luxo CLS ND 004 non dim, V, mA driver CLS ND 008 non dim, V, mA driver CLS ND 012 non dim, V, mA driver CLS MD 004 mains dim V, mA driver CLS VD 001, 1-10V dim, V, mA driver CLS VD 004, 1-10V dim, V, mA driver CLS VD 008, 1-10V dim, V, mA driver CLS DD 001, DALI dim, V, mA driver CLS DD 004, DALI dim, V, mA driver CLS LDC adaptercable LDC to SmartConnect system CLS Dimmer electr. 1-10V LED driver CLS Dimmer Jung phase cut max. 270VA VAC CLS LDC-41 DMX LED dimmer 4 channels A per channel CLS SmartConnect 2-fold junction box & shortcircuit connector CLS SmartConnect, 6-fold junctionbox & shortcircuit connector CLS SmartConnect short circuit plugs (10pcs) CLS SmartConnect extensioncable betw. 2 junctionboxes 5mtr Make sure the LDC-41 is set to 700mA! CLS LDC-41 DMX LED dimmer 4 channels # CLS LDC adaptercable LDC to SmartConnect System # Connector with the red, green and blue cable 24 / 48 VDC Connector with the yellow, black and white cable Driver till last Luxo 6, total cable length is max. 10 m 25 mm (w) 24 VDC powersupply: Max. 1 pc on each channel 48 VDC powersupply: Max. 2 pcs on each channel Also select the correct BT powersupply according to the consumed power 13 14

8 LIST OF SYMBOLS Protection class One, two or three Application area Indoor or outdoor Retail & Food LED modules Clothing, furniture, kitchens, jewellery, shoes, bread, meat, fish & vegetables & fruit. Application area Floor, wall or ceiling Colour Available colours; Amber, blue, red or green Swivel Fixture is horizontally rotatable, indicated in degrees Swivel Fixture is vertically rotatable, indicated in degrees r White colour temperature In different Kelvin values; Cold white, neutral white, warm white or extra warm white Curve Minimal bending curve in centimeters Multiple connection Daisychain connectivity Cutting length Indicated by the cutting marks h Installation depth In centimeters LED pitch Pitch between the LEDs in millimeters ø w d Installation size In centimeters Power supply In VDC, VAC or milliampere Cable length Maximum cable attached to the fixture in centimeters Power consumption In VA or Watt DRIVER DRIVER INCLUDED EXTERNAL Driver Inclusive or exclusive Internal or external Dimmable 1-10 Volt, Phase, individual, DMX dimmable or DALI Weight In grams/kilograms Bluetooth controlled By Casambi Pressure Maximum pressure on the fixture in kg/cm 2 Magno dimming Accurate dimming from 100-1% by using a magnet Lifespan Of the light source in hours Dynamic Control Dynamic Power Control or Dynamic Temperature Control Lenses Availble lenses, indicated in degrees DMX input Fixture works on DMX512 protocol Combined product Compose your own fixture LEDs Kind of LED used in the fixture Warranty 3 or 5 years warranty on the product Plug & play Easy connection using the SmartConnect system Conformité Européenne CE marking for free marketability of industrial goods within the EU IP value Ingress Protection classifies the degrees of protection provided against the intrusion of the product Colour changing RGB, RGB-W, RGB-A, AWB or Tunable White CLS DYNAMIC COLOUR COB Energy label Lightsource Equipped with a CLS, Citizen or a Xicato LED module 2018 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means, without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of your CLS-LED BV invoice, inside the CLS catalogue or on our website /General-Terms.pdf 15 16