LED s. innovate! Catalogue 2010 Mast Products Int.

Size: px

Start display at page:

Download "LED s. innovate! Catalogue 2010 Mast Products Int."

Harriet Cooper
5 years ago
Views:

1 LED s innovate! Catalogue 2010 Mast Products Int.

Retro Fit LED Light Units The new generation of LED Lights!

We offer two versions, a Standard and an Extended (dimmable) unit, neither of which require a driver as the driver is built into the LED Light Unit.

The 3-Colour RGB LED Unit provides White, Red and Bright Blue coloured light. The 7-Colour RGB LED Unit provides White, Red, Light Blue, Bright Blue, Purple, Yellow and Green coloured light.

2 Retro Fit LED Light Units The new generation of LED Lights! Ready in just 2 steps 1 1 Choose your LED unit output Available in 3watt MR16 (50mm) & 60mm size in several choices of light colour output - Cool White, Warm White, and a 3-Colour or 7-Colour RGB. We offer two versions, a Standard and an Extended (dimmable) unit, neither of which require a driver as the driver is built into the LED Light Unit. The Extended version has a built-in dimmer which is controlled by a pulse (momentary) switch. The wiring diagram for the Extended version can be found at the end of this catalogue. The 3-Colour RGB LED Unit provides White, Red and Bright Blue coloured light. The 7-Colour RGB LED Unit provides White, Red, Light Blue, Bright Blue, Purple, Yellow and Green coloured light. Both units also have a mode to gradually change through all its colours, and are also available in an extended version which allows you to dim any given colour. 1 2 Choose your LED unit output Choose your fixture for interior or exterior use 2 The units come standard with a specially designed collimating lens. This lens provides the required beam angle of light output, as well as softening the single LED light point making the unit look similar to halogen lighting. As an added feature, the collimating lens does not reduce the light output as is typically found with frosted lenses. Retro fit 3Watt MR16 Size Retro fit 3Watt 60mm Size Art. No.: RF RF RF RF Light Source 1x 3 Watt LED 1x 3 Watt LED Input voltage 10V-24V/AC or 10V-30V/DC 10V-24V/AC or 10V-30V/DC consumptiom 2,5 Watt 2,5 Watt Intergrated dimmer Optional* (Extended version) Optional* (Extended version) Protection features Reverse Polarity Protection Reverse Polarity Protection Smartdriver Inner controlled Inner controlled Avaiable LED Colours Warm white 3200Kelvin Cool white 5500Kelvin 3 Colour RGB ** 7 Colour RGB * Optional is the extended version with intergrated dimming mode, for more information see wiring diagrams. ** The RGB versions feature a mode to gradually change trough all colours Mast Products Int. reserves the right to make changes at any time 1

Art. No.: RF101010-RF101017 Front Cover Fitting Kits Retro Fit Light 2 Choose your fixture for interior use.

3 Art. No.: RF RF Front Cover Fitting Kits Retro Fit Light 2 Choose your fixture for interior use. Front Cover Round: MR16 Size Ø62mm 60mm Size Ø76mm Front Cover Square: MR16 Size 62mm x 62mm 60mm Size 76mm x 76mm A For interior use, the Retro Fit LED Light Units can easily be fitted with the available front cover fitting kits which are available in a round or square shape, in 4 different finishes - white, brass, brushed aluminium and chrome. B The MR16 size unit will also fit any standard MR16 light fixture from any supplier. C Retro Fit 3Watt MR16 Size: A- 52mm Cut out B- 25mm Depth C- 2,5mm Thick Retro Fit 3Watt 60mm Size: A- 65mm Cut out B- 25mm Depth C- 2,5mm Thick Finishes available Art. No.: RF RF Exterior Housing Retro Fit Light Units 2 Choose your fixture for exterior use. Exterior Fixture Retro Fit LED Units dimensions: Ø80mm size & Ø100mm size A For exterior use, 2 sizes of round shaped fixture are available in 4 different finishes - stainless steel, white, nickel and brass. These carry a lifetime guarantee. B Exterior Fixture 80mm Size: A- 52mm Cut out B- 20mm Depth C- 6,5mm Thick C Exterior Fixture 100mm Size: A- 65mm Cut out B- 30mm Depth C- 8,5mm Thick The MR16 Size Retro Fit LED Unit will fit both the 80mm and the 100mm Exterior Fixtures. The 60mm Retro Fit LED Light Unit requires the 100mm size fixture for fitting the unit. Finishes available 2

The Red version is only available in 45 floodlight for night vision.

2mm Finishes available High LED Multilight Art. No.

knock environments or outside as they come with hardened glass and are waterproof.

4 High LED Ceiling Light Art. No.: CL CL These slim aluminium units contain 3 x 1watt LED s, with a light output comparable to a 20 watt halogen light. The Warm White version is available in two beam angles - a 45 floodlight or a 15 spotlight. The Red version is only available in 45 floodlight for night vision. 3x 1 Watt LED S 10V-30V/DC 3 Watt Warm White or Red Aluminium Aluminium, Chrome & Brass 87mm 25mm 95mm 2mm Finishes available High LED Multilight Art. No.: ML ML The Multi Light is designed to be used in many ways and can even be fitted in hard knock environments or outside as they come with hardened glass and are waterproof. This light may be either surface mounted or recess mounted by simply removing the back housing. 3x 1 Watt LED S 10V-30V/DC 3 Watt Warm White, Cool White or Bright Blue Anodized Aluminium Aluminium & White 62mm The Multi Lights are a perfect choice for use as spreader lights. 43mm 10mm 43mm 10mm 18mm 43mm For recessed mounting simply remove the backside housing. Finishes available 3

Warm White or 6 Warm White & 1 Red Aluminium and Plastic Housing Aluminium, Chrome & Brass ø52mm Cut-Out 65mm

lighting fixture. Many fixture manufacturers use the same cut-out dimensions for this type of fixture.

This fixture is specially designed so that when you first power the light, the red LED will come on first to

To change the light to white, simply turn the light off and back on within 2 seconds and the light will

Finishes available : RB101010-RB222223 G4, MR11 & MR16 LED Replacement Bulbs 7 Super Bright Chip LED s

the G4, MR11 and MR16 7-Super Bright Chip LED Replacement Bulbs, you can instantly replace all of your

5 Art. No.: CL CL Chip LED Ceiling Light 15mm 7 Super Bright Chip LED s 10V-24V/ACor 10V-30V/DC 1,2 Watt Warm White or 6 Warm White & 1 Red Aluminium and Plastic Housing Aluminium, Chrome & Brass ø52mm Cut-Out 65mm 3mm This 7-Chip LED Ceiling Light is capable of being easily retrofitted in the same hole as your existing lighting fixture. Many fixture manufacturers use the same cut-out dimensions for this type of fixture. There is also a version available with one red LED for night vision. This fixture is specially designed so that when you first power the light, the red LED will come on first to assure that when sailing at night it will never destroy your night vision when switching on the lights. To change the light to white, simply turn the light off and back on within 2 seconds and the light will change to the white setting. Finishes available Art. No.: RB RB G4, MR11 & MR16 LED Replacement Bulbs 7 Super Bright Chip LED s 10V-30V AC/DC 1,2 Watt Warm White & Soft White G4 Anodized Aluminium MR11/MR16 Glass Replacement fitting With the G4, MR11 and MR16 7-Super Bright Chip LED Replacement Bulbs, you can instantly replace all of your halogen lights with LED s. These LED Replacement Bulbs will give you the light output equivalent of a 10watt halogen bulb. The G4 version is available with side or back pins depending on the fixture it must be fitted into. Ceiling lights will typically use the side pin version, and reading lights will typically use the back pin version. 4

incandescent light bulb, instantly converting your navigation lights to LED, for boats up to 20

Available colours are White, Red, Green, Two Colour Red/Green and Three Colour Red/Green/White

5watts of power and have the same light output as a conventional 25watt incandescent bulb.

colour Red, Green, Three colour Red, Green, White Anodized Aluminium Bay15D BA15D, BA15S &

: RB060606-RB090912 The BA15d, BA15s & Festoon style 18-Double Chip LED Replacement Bulbs will

to LED, for boats up to 12 Because each LED has two Chips, the Replacement Bulb has the same

Available colours are White, Red, Green & Two Colour Red/Green, to fit all versions of

The LED Replacement Bulbs consume merely 2watts of power and have the same light output as a

6 Bay15D LED Replacements Bulbs Art. No.: RB10101-RB The Bay15d 50-LED Replacement Bulb will replace your conventional incandescent light bulb, instantly converting your navigation lights to LED, for boats up to 20 meters. Available colours are White, Red, Green, Two Colour Red/Green and Three Colour Red/Green/White to fit all versions of navigation light fittings. These LED bulbs consume merely 3.5watts of power and have the same light output as a conventional 25watt incandescent bulb. Fitting : 50pcs 5mm Super Bright LED s 10V-30V/DC 3,5 Watt All Around Red, Green, White, Two colour Red, Green, Three colour Red, Green, White Anodized Aluminium Bay15D BA15D, BA15S & Festoon T13x44 18 Double Chip LED Replacement Bulbs Art. No.: RB RB The BA15d, BA15s & Festoon style 18-Double Chip LED Replacement Bulbs will replace your conventional incandescent light bulbs, instantly converting your navigation lights to LED, for boats up to 12 meters. Because each LED has two Chips, the Replacement Bulb has the same light output compared with 36 normal LED s. Available colours are White, Red, Green & Two Colour Red/Green, to fit all versions of navigation lights. The LED Replacement Bulbs consume merely 2watts of power and have the same light output as a conventional 10watt light bulb. For some brand manufacturers of navigation lights fixtures, a bulb with our special dimple fitting is required for fitting in these fixtures. These Replacement Bulbs with the special fitting we call Special Dimple Fitting. Fitting : 18pcs Double Chip Super Bright LED s 10V-15V/DC 2 Watt All Around Red, Green, White & Two Colour Red & Green Anodized Aluminium BA15D, BA15S, Festoon T13x44 & Festoon Special Dimple Fitting 5

Ø100mm, 115mm height & 95mm width backside Bracket Surface Mounted The MAST LED Navigation Lights are specially developed to save

The housing of the Navigation Light is constructed of strong polycarbonate and stainless steel.

: CH010101-CH020202 LED Chart/Reading Light With Touch LED 18x Very Bright White LED s 10V-30V/DC 1,2 Watt Aluminium Chrome & Brass

7 Art. No.: NL NL High LED Navigation Lights 4x1Watt & 5x1 Watt LED s 10V-30V/DC 4 to 5 Watt Polycarbonate & Stainless Steel Ø100mm, 115mm height & 95mm width backside Bracket Surface Mounted The MAST LED Navigation Lights are specially developed to save power, lower maintenance, and to improve the visibility of boats up to 20 meters. The housing of the Navigation Light is constructed of strong polycarbonate and stainless steel. Brackets are included with the lights for easy fitting. Art. No.: CH CH LED Chart/Reading Light With Touch LED 18x Very Bright White LED s 10V-30V/DC 1,2 Watt Aluminium Chrome & Brass 30cm Flexible Shaft Surfaced Mounted In the dark you can always find this light very easily due to the red LED which is lighted all the time. Simply touch the red LED, and the very bright white LED s will light up. Touch the LED again, and the white LED s will turn off, leaving only the red LED on. With the red LED on all the time, this light serves as low level illumination for navigation at night. 6

shapes. A 3cm stiff shaft, a 10cm flexible shaft and a 30cm flexible shaft.

the light is powered it will come on, and then may be controlled for on/off and

Led colours: Finish: Mounting: 1x 3 Watt LED 10V-30V AC/DC Aluminium Warm White

Ceramic and Chip technology which can replace a 50 watt halogen flood light.

stainless steel, and the finish is achieved with a double powder coating process

8 LED Wall/Reading Light Art. No.: WR WR The LED Wall/Reading Light comes in 3 different design shapes. A 3cm stiff shaft, a 10cm flexible shaft and a 30cm flexible shaft. These lights are provided with a built-in dimmer switch which is controlled by the push button on the base. The lights may also be controlled by a wall switch in a circuit of lights - when the light is powered it will come on, and then may be controlled for on/off and dimming by the push button on the fixture. Led colours: Finish: Mounting: 1x 3 Watt LED 10V-30V AC/DC Aluminium Warm White 3cm stiff shaft, 10cm flexible shaft, 30cm flexible shaft Chrome Surface mounting LED Flood Light Art. No.: FL LV - FL LV For this 10 watt LED Flood Light we use the newest Ceramic and Chip technology which can replace a 50 watt halogen flood light. All stainless steel parts including the bracket are made of high quality A4 316 stainless steel, and the finish is achieved with a double powder coating process which makes the light salt waterproof. These LED Flood Lights will be available in a Grey or White Finish, and offer the choice of Warm White 3200K or Soft White 3900K colour output. consumption: 1x 10 Watt ceramic LED 10V-30V DC 10 Watt Warm White, Soft White Aluminium & A4316 Stainless steel 120mm x 85 mm x 55mm 7

Brass 110mm Long, 20mm Height & 13mm Width Surface mounted The LED Step/Courtesy Light is designed not to shine into your eyes when lighted.

The 5mm Super Bright LED s in this fixture are available in Warm White or Cool White, with two choices of finishing, Chrome or Brass.

Marker Lights are constructed of 316 stainless steel, are exterior rated, and may also be placed underwater as they are totally waterproof.

9 Art. No.: SC SC LED Step/Courtesy Light Mouting : 5x 5mm Super bright LED s 10V-30V/DC 0,5 Watt Warm White or Cool White Aluminium Chrome & Brass 110mm Long, 20mm Height & 13mm Width Surface mounted The LED Step/Courtesy Light is designed not to shine into your eyes when lighted. Due to the cover design, the light shines downward. There are also no visible screws because of the smart mounting system. The 5mm Super Bright LED s in this fixture are available in Warm White or Cool White, with two choices of finishing, Chrome or Brass. Art. No.: ML ML LED Marker Light 2x 5mm Super Bright LED s 10V-15V AC/DC 0,14 Watt Cool White, Bright Blue & Red Stainless Steel 316 The LED Marker Lights are constructed of 316 stainless steel, are exterior rated, and may also be placed underwater as they are totally waterproof. Embedding Di.: Polished Stainless Steel Recessed Mounted Ø40mm &25mm Depth Ø30mm &25mm Depth 25mm These Marker Lights can be used on boats, caravans, marinas, walking paths in your garden, bathrooms, kitchens, etc. The highly polished finish shows a remarkable effect when the fixture is lighted. 30mm 2,5mm 8

LED Modules String Art. No.: LM010101-LM040404 The LED Modules have 5 Super Bright LED s. They come as a string 5 meters long, with a total of 40 modules.

consumption: LED Colours: 5x Super Bright LED s 10V-15V/DC 0,5 Watt Warm White, Cool White, Red & Bright Blue Plastic White Surface Mounted with Double sided 3M Tape or Screws 80mm Long, 16mm Width &

The Strips are available in Warm White, Cool White, Bright Blue and 7-Colour RGB. The RGB range of colours are White, Red, Light Blue, Dark Blue, Purple, Yellow and Green.

The LED Strip may be cut every 10cm to achieve the length required for the installation. The Strip is available in lengths of 50cm with connectors on each end for easy connection.

10 LED Modules String Art. No.: LM LM The LED Modules have 5 Super Bright LED s. They come as a string 5 meters long, with a total of 40 modules. The wire may be cut after each module to allow for the fitting of any length required. These LED Modules are very easy to fit with the double sided 3M tape on the back; they may also be screw fitted. consumption: LED Colours: 5x Super Bright LED s 10V-15V/DC 0,5 Watt Warm White, Cool White, Red & Bright Blue Plastic White Surface Mounted with Double sided 3M Tape or Screws 80mm Long, 16mm Width & 15mm Height Flexible LED Strip Art. No.: LL LL This very flexible waterproof LED Strip is easy to fit due to the 3M tape on the back. The Strips are available in Warm White, Cool White, Bright Blue and 7-Colour RGB. The RGB range of colours are White, Red, Light Blue, Dark Blue, Purple, Yellow and Green. The RGB Flexible LED Strip requires a driver to power and control the colour settings. This Driver will allow you to set colours, gradually change through all 7 colours, and provides dimming control. The LED Strip may be cut every 10cm to achieve the length required for the installation. The Strip is available in lengths of 50cm with connectors on each end for easy connection. Extension cables of 10 meter length and corner connections are also available. As with all of our RGB Lights, there is also a mode to gradually change through all of the colours, and when connected in a circuit together with our 7 colour RGB Retro Fit Lights these will all operate synchronised. LED Colours : Flexible SMD LEDstrip 10V-15V/DC The RGB needs Driver DR V to power Warm White, Cool White, Bright Blue and 7 colour RGB Flexible Silicon Strip Surface Mounting 17mm Width in pcs of 500 mm lenght 9

These anodized aluminium units are slim and waterproof, thus allowing you to quickly and easily install or add lighting wherever it may be required.

3cm Width, 21cm Long & 1cm height Surface Mounted 95cm/125cm Version: Light Source: 18x1Watt 0r 24x1Watt LED s The long 95cm and 125cm LED Bars are available only in the flat version, in Warm White,

LED Colours: Warm White & Cool White Material: Anodized Aluminium White 3cm Width, 1cm height & 95cm or 125cm Long Mounting: Surface Mounted : LB757576 & LB808080 High RGB LED Bars Shape : 18x3Watt

11 Art. No.: LB LB High LED Bars LED Colours : 3x1 Watt LED s 10V-15V/DC 3 Watt Flat Version: Warm White, Cool White Bright Blue & Red Triangle version: Warm White & Red Anodized Aluminium Aluminium These anodized aluminium units are slim and waterproof, thus allowing you to quickly and easily install or add lighting wherever it may be required. The small 21cm LED Bars come in two shapes - flat and triangular, and in various output colours. The small flat shape is perfect for use as a boom light. 3cm Width, 21cm Long & 1cm height Surface Mounted 95cm/125cm Version: Light Source: 18x1Watt 0r 24x1Watt LED s The long 95cm and 125cm LED Bars are available only in the flat version, in Warm White, Cool White or 7-Colour RGB light output. Source: consumption: 10V-15V/DC 18Watt or 24Watt The long LED Bars in Cool or Warm White are perfect for use as engine room lights. LED Colours: Warm White & Cool White Material: Anodized Aluminium White 3cm Width, 1cm height & 95cm or 125cm Long Mounting: Surface Mounted Art. No.: LB & LB High RGB LED Bars Shape : 18x3Watt RGB LED s Driver/Dimmer DR Watt Flat Anodized Aluminium White 3cm Width, 1cm Height & 95cm Long Surface Mounted The RGB LED Bar gives you the choice of 7 different colours of light in just one fixture. The range of colours are White, Red, Light Blue, Dark Blue, Purple, Yellow and Green. The RGB LED Bars require a driver to power and control the colour settings. This Driver will also allow you to set colours, gradually change through all 7 colours, and allow for dimming control. 10

The light output is Warm White which is comfortable for your eyes.

12 Slim SMD LED Bar Art. No.: SB The Slim SMD LED bar can be installed with the polycarbonate hooks on the rail of a bimini top, or by removing the hooks they can be fitted with screws underneath cabinets, etc. The light output is Warm White which is comfortable for your eyes. With a car plug and converter, which is supplied with the slim LED bars, you can choose to power the light with either low voltage or high voltage. The slim bar is supplied with 5 meters of wire with connectors to connect the car plug or the converter. consumption: LED Colours : 24x 0,25 Watt SMD LED s 10V-30V AC/DC or high voltage by converter 6 Watt Warm White Aluminium polycarbonate Surface Mounting 10mm x 15mm x 500mm The light is perfect in situations where light is temporarily required and must be able to be removed. Driver/Dimmer Manual & Wiring Diagram RGB LED Bars Art. No.: DR Connection with : RGB LED Bars The DR Driver/Dimmer is for use with the RGB LED Bars with 4.2V/DC input. A pulse (momentary) switch is required to control the driver. The green, blue, grey and red wires should always be connected with similar coloured wires. This is extremely important because the LED s are sensitive to polarity. Output : Dimming Mode : Control Switch : Input: 10V-24V AC or 10V-35V/DC 4.2V / 15A Yes Pulse/Momentary Switch Aluminium Housing WARNING: IF NOT CONNECTED PROPERLY, THE LED ENGINE WILL FAIL! USE CAUTION TO NOT CONNECT THE WHITE AND YELLOW CONTROL WIRES TO ANY POWER SOURCE. IF THE WHITE AND YELLOW WIRES ARE CONNECTED TO ANY POWER SOURCE, EVEN BRIEFLY, THE UNIT WILL FAIL! NO WARRANTY CAN BE ALLOWED FOR ANY UNIT THAT HAS HAD THE WHITE AND YELLOW WIRES CONNECTED TO ANY POWER SOURCE. Red Green Input 10V-35V/DC or 10V-24V/AC RGB Driver DR Output 4.2V/DC Connection Blue Black Yellow White Pulse switch 11

13 WARNING: USE CAUTION TO NOT CONNECT THE WHITE AND YELLOW CONTROL WIRES TO ANY POWER SOURCE. IF THE WHITE AND YELLOW WIRES ARE CONNECTED TO ANY POWER SOURCE, EVEN BRIEFLY, THE UNIT WILL FAIL! NO WARRANTY CAN BE ALLOWED FOR ANY UNIT THAT HAS HAD THE WHITE AND YELLOW WIRES CONNECTED TO ANY POWER SOURCE. Retro Fit Led Units Extended Version Manual & Wiring Diagram The extended version of the Retro Fit Light Unit will allow you to dim the LED lights as the dimmer is built in to the light. It is a 4-wire system. The black and red wires are the power input wires. The light will operate on a voltage range of volts AC, or volts DC. The white and yellow wires are to be connected to a pulse (momentary) switch for on/off and dimming control. For controlling multiple units in a single circuit simply connect the all yellow wires together and all white wires together and connect them all to the same pulse (momentary) switch. Although the power to the lights may be provided from more than one source, as long as the unit s yellow and white control wires are connected together the circuit may be operated by a single control switch. Additional pulse (momentary) switches may be paralleled together to allow for controlling the light circuit from more than one location. Black/red Input 10V - 24V/AC or 10V- 30V/DC White/yellow control wires Pulse switch Art. No.: DR Dimmer 10V-30V/DC - 10V-30V/DC Manual & Wiring Diagram Control Switch : Input: 10V-30V DC Output: 10V-30V/DC - 4A Max Pulse/Momentary Switch Polycarbonate Housing WARNING: USE CAUTION TO NOT CONNECT THE WHITE AND YELLOW CONTROL WIRES TO ANY POWER SOURCE. IF THE WHITE AND YELLOW WIRES ARE CONNECTED TO ANY POWER SOURCE, EVEN BRIEFLY, THE UNIT WILL FAIL! NO WARRANTY CAN BE ALLOWED FOR ANY UNIT THAT HAS HAD THE WHITE AND YELLOW WIRES CONNECTED TO ANY POWER SOURCE. The dimmer DR is a 10V-30V/DC special LED dimmer for our LED Lights. A pulse (momentary) switch is required for controlling the on/off and dimming mode. The driver can handle up to 50 watts of LED lights. For this dimmer the newest smart dimming technology is used for smooth dimming of our LED Lights. Red/black Input 10V-30V/DC Dimmer 10V-30V/DC to 10V-30V/DC 50Watt Max. DR Red/black output 10V-30V/DC 4A White/yellow control wires Pulse switch 12

Driver/Dimmer Manual & Wiring Diagram RGB LED Line Art. No.: DR020202-12V The DR020202 Driver/Dimmer is for use with the Flexible RGB LED Lines.

14 Driver/Dimmer Manual & Wiring Diagram RGB LED Line Art. No.: DR V The DR Driver/Dimmer is for use with the Flexible RGB LED Lines. We have a 12V and a 24V version available depending on the voltage system to place the line. A pulse switch is needed to control the driver. It will allow you to control the colour setting and dimming. The green, blue, grey and red wires should always be connected with the similar coloured wires on the LED Line. This is very important, because the LED s are sensitive to polarity. The white and yellow wires are for connecting the control switch. WARNING: IF NOT CONNECTED PROPERLY, THE LED LINE WILL BREAK DOWN! Connection with : Flexible RGB LED Line 10V-15V/DC Output : 12V/DC Dimming Mode : Yes Control Switch : Pulse/Momentary Switch Polycarbonate The 12V version can be connected with a max. of 5 meter RGB LED Line. The 24V version can be connected with a max. of 10 meter RGB LED Line. Red Green Input 10V-15V/DC RGB Driver DR V Output 12V/DC Connection Blue Black Yellow White Pulse switch Information Protection from solids : Tools & small wires (>1mm) Protection from liquids : Water spray from any direction Limited dust ingress protection Total dust ingress protection Low pressure water jets from any direction Total dust ingress protection Total dust ingress protection Temporary immersion between 15cm and 1m depth Interior use Exterior use Wall and Ceiling Wall and Floor Tread Resistant 13

15 Distribution info For availability of our LED products please visit our website at Go to the LED Lights distributor page for your nearest stockist. If you can t find a stockist near you please contact us at info@mastproducts.com. Notes Di s c l a i m e r MAST Products International does all the best to prevent any mistakes printed in this catalogue. However MAST Products International can t be kept responsible for any mistakes printed in this catalogue. Any claims by mistakes printed in this catalogue are specially ruled out by this disclaimer. 14

Scandvik RETAIL PACKS 2015

Scandvik RETAIL PACKS 2015 SCANDVIK RETAIL PACK TRANSOM SHOWER CLAMSHELL #12124P Black with 6 black nylon hose #12131P White with 6 white nylon hose #12106P NEW White handle, cup and cap with 6 white hose