MONROE COUNTY FIRE RESCUE VEHICLE INVENTORY AND REPLACEMENT STATUS

Transcription

1

2

3 MONROE COUNTY FIRE RESCUE VEHICLE INVENTORY AND REPLACEMENT STATUS VEHICLE TYPE YEAR PURCHASED REPLACEMENT YEAR RESCUE(S) * Overdue Overdue Overdue Overdue Overdue Overdue ENGINE(S) ** Overdue Overdue Overdue TANKER(S) *** Overdue Overdue Overdue Overdue * RESCUES/AMBULANCE Life expectancy 7 years ** ENGINES Life expectancy 15 years *** TANKERS Life expectancy 18 years

4 MEMO FLORIDA SHERIFFS ASSOCIATION P. O. Box Tallahassee, FL PHONE (850) FAX (850) WEB SITE: DATE: January 3, 2014 TO: PROSPECTIVE PURCHASING AGENCIES FROM: Lynn Meek Peggy Goff Drew Terpak Contract Coordinator Contract Manager Contract Specialist RE: Additional Extension of Bid Fire Rescue Vehicles & Other Fleet Equipment (Extended from January 1, December 31, 2014) The Florida Sheriffs Association will extend Bid through December 31, All terms and conditions will remain the same with the exception of the date. The Florida Sheriffs Association has agreed for manufacturers to cover any additional cost in the base model not to exceed three percent (3%) or a maximum aggregate of a six percent (6%) overall cost increase over the original base contract price and all options offered through Bid , as allowed in Part B, item thirteen (13). This bid was originally effective from January 1, 2012 thru December 31, 2012, but was extended from January 1, 2013 thru December 31, Manufacturers also agreed to extend once again from January 1, 2014 thru December 31, Purchase orders should start at the base price for the vehicle being purchased and show the allowed increase. The end user should request documentation from the manufacturers in order to substantiate the increase. We appreciate your loyalty and continued support.

5 MEMO FLORIDA SHERIFFS ASSOCIATION P. O. Box Tallahassee, FL PHONE (850) FAX (850) WEB SITE: DATE: October 30, 2012 TO: PROSPECTIVE PURCHASING AGENCIES FROM: Peggy Goff Lynn Meek Vehicle Contract Manager Cooperative Bid Coordinator RE: Extension of Bid Fire Rescue Vehicles & Other Fleet Equipment The Florida Sheriffs Association will extend Bid through December 31, All terms and conditions will remain the same with the exception of the date. The Florida Sheriffs Association has allowed an increase of three percent (3%) on the base price of the vehicles and all options offered through Bid , as allowed in Part B, item thirteen (13). Due to the increase in chassis prices, this increase will be effective immediately. Purchase orders should start at the base price for the vehicle being purchased and show the allowed increase. The end user should request documentation from the manufacturers in order to substantiate the increase. We appreciate your loyalty and continued support.

6

7 QUOTATION ETR JERRY MICHALUK 212 HICKMAN DRIVE SANFORD, FLORIDA MONROE COUNTY FIRE RESCUE Exp. Date: 01/11/2014 Quote No: TYPE I: 172T1LWBFT 172 LWB Ford T1 Top Level Model GENERAL: Gen_Info ************BID STANDARDS*************** CHASSIS: F-4/550LB *******F-Series 189 WB CHASSIS********** CONVERSION: 172T1LWBF 172 x 95 T-1 LWB Ford Mod Body, BASE BASE: 172T1LWBFP 172 x 95 T-1 LWB Ford Base Price 03/05/2014 Page 1 == ************BID STANDARDS*************** /07/11 == BID STANDARDS FLORIDA SHERIFF'S ASSOCIATION BID # SPECIFICATION #01-TYPE 1 AMBULANCE (4X2) F-550 AEV TYPE 1 CONTRACT BASE UNIT PRICE - $119, CONTRACT EXTENSION PRICE INCREASE - 3% CONTRACT EXTENSION PRICE INCREASE - 3% Party Identification Vehicle Quantity (Vehicles) BODY NUMBER: -- MICKEY BODY DUE DATE : ACCOUNT MANAGER: Mikael Blevins REFERENCE UNIT # : RE-WRITE DATE : SEAT BELT POSITIONS MODS -- CAB SEAT BELT MOD: -- Total: 2 Positions -- REAR SEAT BELT MOD: -- Total: 4 Positions Revision Level: 0 - Zero - ORIGINAL VERSION == *******F-Series 189 WB CHASSIS********** /07/11 == Type I Modular Ambulance 2014 Ford, F x 2 DRW Reg Cab, 189" WB, XLT Call for price and body configuration. -- Engine: 6.7L Scorpion, Pwr Stroke V-8 Turbo Diesel - F-series -- Cab Interior Color: Gray (F-series) -- GVWR: 18,000 pounds, FAWR: 7,000, RAWR: 13,660 (4x4) -- Anti Rust Spray, Detco: Installed on Unit Purchasing to buy 12 Aerosol Cans NOTE: To be Sprayed to Chassis Frame before the Body is Mounted

8 03/05/2014 Page 2 -- Tire, SPARE: Matching, Random Make -- Location: Shipped Loose -- Jack and Tire Tools: None -- Wheel Finish: Polished SS Wheel Simulators (F-550) -- Brakes, F-4/550: 4-Wheel Disc/Anti-lock, Power Assist -- Cab Door Locks: Power -- Floor Pedals: Brake and Accelerator, Adj... 62M -- Daytime Running Lights: Ford OEM -- Shock Absorbers: O.E.M., HD Gas Type, 1.38 inch -- Front stabilizer (Sway) Bar: OEM, 1.00 inch bar diameter -- Fuel Tank: 40 Gallon, Aft Axle, Fords -- Rear Axle: DANA 80, Full Float, 4.10:1 Ratio (F-4/550) -- Tires: F-4/550, All season, Random Mk 225/70 R19.5, LR F -- 47L - Ambulance Prep Package F-Series -- Alternator: Dual (OEM) Motorcraft Dual Per 47A -- Throttle: Ford High Idle -- Radio, F-series: OEM AM/FM/CD, w/ 4 cab speakers -- Ford SYNC installed 91N -- Tire Pressure Monitoring System: None -- Side Mirrors, OEM: (F-Series) Pwr glass, Manual Telescopic -- Air Ride Suspension: F-450 / F-550, LINK Ultra Ride Compressor, OEM mounted on frame. *NOTE: If Oxygen Lift is installed, then if the O2 Cmpt Door is open, the air suspension will not dump until door is closed* NOTE: LINK Air Ride Suspension Comes with a Rear Sway Bar, It is not recommended by the Air Ride Manufacturer to purchase aftermarket Sway Bars -- Rear Suspension 1,000 mile re-torque requirement Rear Suspension manufacturer requires inspect & re-torque at 1,000 Miles -- ""DETAIL"" Link Air Ride Decal Install Prior to delivery, detail department is to install a Black with Silver Letter Decal on the dash: Link Ultra-Ride Suspension Warranty is void if not serviced Per Manufacture Specifications or -- Rear Stabilize (Sway) Bar: IPD, Ford F-450/550, 1.50" Dia... Installed with Suspension by AEV. -- Kneeling Feature: Enable Switch Located in CAB console -- Kneeling Feature: Activated by TRAILING rear access door -- AIR Compressor: LINK supplied -- AIR Compressor LOCATION: OEM, on frame -- Exhaust system termination point: O.E.M. Location, Rt Rear -- Leveling Valves: Dual, (1) Left, (1) Right -- Dryer Unit: Automatic on System NC Inspection Required: NONE == 172 x 95 T-1 LWB Ford Mod Body, BASE /07/11 == BODY

9 03/05/2014 Page 3 -- Body Build Information Body Number; Account Manager; Body Type : Mickey Body Due Date; -- ALL DIMENSIONS ON ORDER WILL HAVE A VARIABLE OF + OR - 1/4" Unless specified as a minimum dimension. Module optional parts Body, Mod: Type 1 LWB, 172" x 95" x 72" Interior HR - 6" Body Drop Headroom: 74/72" Finished Interior - Ducted A/C Compartment Construction: STANDARD, Unless Specified Otherwise Sides and Back:.100 Polished Aluminum Diamond Plate Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Ventilation - Austin Flap style #VT-2495-A01, STD -- Talk through, Cab to Mod Window (T1) With Sliding Window -- Cab Roof Support : 3/16" x 3" Steel Plate, Per Engineering Drawing Between cab headliner and bottom side of cab roof to prevent oil canning. -- Body Drop: 6" Both Sides, Ahead of Rear Wheels Curb side Entry Door (CSE): High x 31 Wide -- Compt Door Check : Double Action Gas Shock -- Door Swing Angle: Set just over 90 degrees -- Step Well, CURBSIDE Entry Door, 2-Step Diamond Plate -- Light, Step Well: 3" Weldon, White, STD Weldon No T. Light shall come on with CS door only. -- IATS Light, Step Well: 3" Weldon, White, Weldon No T. Light shall come on with CS door only M-1 Compt (LF): 72 HR, 67.5" H x " W x 19.5" D w/m1a compartment Splash Shield: Add a deflector plate between M-1 and M-2 to shield water splash from the compartment louvers. -- Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Compartment Door: SINGLE DOOR, 2-point Latch -- Light, Compt, M-1 (LF): 18" Maxxima LED tube MTB Note: No Light Hole Required NOTE: Light Mounted On Ceiling Near Door Jamb -- Prep For 02 Lift Build out back wall to 14" deep -- M-1a Compt (LF Upper): 72 HR, 17.56" H x " W x 19.4" D Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate

10 03/05/2014 Page 4 Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Compartment Door Ventilation - Louvered Door -- Compartment Door: SINGLE DOOR, 1-point Latch -- Light, Compt, LED, M-1A (LF Upper): Intertek Model No ZY-156-LEDC, ILOS MTB Note: 1" Hole, Centered in Compartment ceiling M-2 Compt (LFM): 40.5" H x 51" W x 19.5" D -- Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Doors, Compartment, DOUBLE DOORS (std) -- M-2 Shelf, Adjustable, Ext:.125 Alum, 2" Upward lip -- Shelf Bracket: CPI 90 Deg with Slotted Holes -- Light, Compt, M-2 (LFM): 36" Maxxima LED tube MTB Note: No Light Hole Required NOTE: Mount Light on Ceiling Near Door Jamb -- Condenser, 12V: ACC, Dual Fan, Under Step Well Condenser Brackets: Under Step Well Angled Down -- Standard Conduit: 1-1/2"", with pull wire -- CONDUIT ORIGINATION POINT: M-1a compartment -- CONDUIT TERMINATION POINT: Behind A/A Board (Panel) -- Additional Conduit: 1-1/2"", with pull wire, Type 1 units -- CONDUIT ORIGINATION POINT: Electrical Circuit board cabinet -- CONDUIT TERMINATION POINT: Behind Driver's seat -- M-3 Compt (LR): 61.5" H x 33" W x 19.5" D Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Compartment Doors: DOUBLE DOORS, ILOS single (2) Shelves, Adjustable, Ext:.125 Aluminum, 2" Upward Lips Shelf Bracket: CPI 90 Deg with Slotted Holes Light, Compt, M-3 (LR): 24" Maxxima LED tube MTB Note: No Light Hole Required NOTE: Mount on Ceiling Near Door Jamb -- Reinforce Compartment walls #1, #2, # Reinforce for future installation of SCBA Brackets -- M-5 Compt (RR): 72 HR, 82.8" H x " W x 21.0"D -- Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate

11 03/05/2014 Page 5 Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Compartment Door: SINGLE DOOR, 2-point Latch -- M-5 Shelf, Fixed, Ext:.125 Aluminum, Partial Width 2" lips upward FIXED SHELF IN FORWARD SPACE APPROX. 42" UP FROM BOTTOM OF COMPT. SEE DRAWING. -- M5 (2) Dividers, Vertical, Full compartment height, alum, Fixed Strap: 2" Webb, w/ Chrome Metal Seatbelt buckle This strap is to secure things from moving while the vehicle is in motion, it is not a tested device and is not designed to be a crash stable securing device. -- 2" Footman Loops: Locate back from jamb -- Light, Compt, M-5 (RR): 18" Maxxima LED tube MTB Note : No Light Hole Required NOTE: Mount on Ceiling Near Door Jamb -- M-6.5 Drawer (RWW): 7.5" H x 56.0" W x 19.4" D Roll out aluminum Tray:.125 Aluminum sheet The M-6.5 drawer will be located over the right rear wheel. It will have a standard light that will illuminate when the drawer is opened. The drawer will take away some storage under the squad bench. -- Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Drawer Front: 2-point latch -- Light, Compartment: LED, Intertek #ZY-156-LEDC,, Each MTB Note: No light hole required -- M-6 Compt (RRFwd): 19" H x " W x 19.5" D -- Compartment Construction: STANDARD Diamond Plate Sides and Back:.100 Polished Aluminum Diamond Plate Compartment Bottom:.125 Aluminum Sheet Compartment Ceiling:.090 Aluminum Sheet -- Compartment Door Panel: Diamond Plate -- Compartment Finish: Diamond Plate Standard -- Compartment Door: SINGLE DOOR, 1-point Latch -- Shelf, Adjustable, Ext:.125 Aluminum, 2" Upward Lips Shelf Bracket: CPI 90 Deg with Slotted Holes -- Light, Compt, M-6 (RRF): 12" Maxxima LED tube MTB Note: No Light Hole Required NOTE: Mount on Ceiling Near Door Jamb -- M-7 Compt (RF): 67.5" H x 25.25" W x 21.0" (Below FL), I/O -- Compartment Door: SINGLE DOOR, 1-point Latch

12 03/05/2014 Page 6 -- Light, Compartment: 36" maxxima LED tube MTB Note: No light hole required NOTE: Mounted on Wall #3 of M7 Compartment Centered M-8 Drawer (RF): None - Batteries Under Hood -- Rear Access Doors: 46 3/4" Wide x 60 5/8" High WELDING - CELL 1 Fuel Fill: CPI C1045, Open Housing, Polished Bezel - (Std) AEV Part No: HOUS-1045 Urea Fill: CPI FG Inlet Housing BODY PROTECTION AND TRIM PACKAGE: F-Series -- Wire/Hose Cover : Diamond Plate, Between Cab & Module Bumper, Rear: HD Alum Framed w/dp pontoon covers Medium Duty style Note: Bumper will not mount under kickplate and will damage kickplate in rear end collision -- Step, Center: 2" x 9" Grip strut, flip-up -- Dock Bumpers: Rubber 2 1/4" H x 16" W x 2" Thick AEV Part No: BUMP-02A -- Fenders, Rear: Rubber Extruded, Black MTB # Skirt Rails: Polished Aluminum Diamond Plate -- Rear Kick Plate: Polished Aluminum Diamond Plate -- Recessed Tag Area: Polished Aluminum Diamond Plate -- Location: Centered in the kick plate -- Tag Light: Kinequip LED #132703C Corner Caps: 24.0" High, Alum Diamond Plate If there is a body drop, add the appropriate height to Corner Caps. -- Front Stone Guards: 24.0" High, Alum Diamond Plate If there is a body drop, add the appropriate height to Stone Guards. -- Rear Deflector: NONE (4) Rear Door Hold Opens: Grabber Style, Top/Bottom each door AEV Part No: HOLD-16N (4) Running Boards: F-Series Modular - 2 Door Mud Flaps Front: NONE -- Mud Flaps Rear: Modular, Rubber AEV Part# FLAP-M02 -- EXTERIOR LIGHTING / HEAT/AC / INSULATION - CELL 2

13 03/05/2014 Page 7 Side Turn, Whelen 700 Series w/arrow, LED, Pair, IATS Location: Side of Module, Above Each Rear Wheel Install a Whelen 700 series progressive LED arrow to each side of the module over the rear wheels. The light will be inserted into a CPI 15 degree housing LH There is a M-6.5 pull out drawer that the mentioned light will be mounted above the drawer. See drawing. -- Cast Housings: 15 degree angle outward CORNER CAP LED ICC/WARNING LIGHTS -- Front Corner Cap LED ICC/Warning Lights: Warnings RED/WHITE -- Front Center ICC Lts: (3) AMBER Weldon LED No A Switch w/ Headlights. -- Front ICC Lt Guards: NONE Rear Corner Cap LED ICC/Warning Lights: Warnings RED/AMBER -- Rear ICC Lts: (3) RED Weldon LED No R Switch w/ Headlights -- Rear ICC Lt Guards: NONE ICC Warning Lights Switched: Primary Only -- Tail Lights, Whelen LED Combinations, ILOS, -- Side Marker Lights: (2) RED LED 2" Round Bumper Pontoons Grommet mounted Whelen Light T0R00MRR with Grommet TGROM2 -- Whelen 600 Series, Tail Lights -- Housings, (2), Whelen CAST3H, (3) 600 Series lights, Horizontal Mount Purchasing Note : (2) #HOUS-CAST3 Located on kick plate. Brake outboard, Turn center, and Backup inboard -- Stop/Tail, Whelen 600 Series, LED, Pair, Maximum Populated Turn, Whelen 600 Series, LED, Pair Back up, Whelen 600 Series, Halogen, Pair LED Patient on Board, Exterior, NONE LED Door Panel Warning, Interior, NONE Underbody ("BUM") Lights : NONE Patient Area Turn and Stop Light Indicator: None Third (3rd) Brake Light: NONE SCENE/FLOOD LIGHTS (Whelen Halogen 900 size) -- Left Scene Lights: (2) Whelen 900, 8-32 Degree, -- Flanges: (2) Chrome for above 900 Series Scene lights -- Left Flood Activate: Left Flood Switch -- Right Scene Lights: (2) Whelen 900, 8-32 Degree, -- Flanges: (2) Chrome for above 900 Series Scene lights -- Right Flood Activate: Right Flood Switch and open CSE Door -- Rear Load Lights: (2) Whelen 900, 8-32 Degree -- Flanges: (2) Chrome for above 900 Series Rear load lights -- Activate: Rear Flood Switch, Reverse and Lead RA Door Secondary Heat/AC: Danhard 125VAC System, All underbody components must be mounted ahead of rear axle. With thermostat mounted in A/A Danhardt Located in cabinet below the telemtry area. See drawings.

14 03/05/2014 Page 8 AC (HVAC): ACC, Ducted in Ceiling - Vert... - T1 Ford Mounted Behind the Attendant Seat Base Condenser under step well ILOS -- AC COMPRESSOR: Tee into O.E.M. -- AC Evaporator: ACC (AC/Heat unit) w/ dual fans - STD -- Condensation Drain Pan: Internal ABS -- Heater Hoses: EPDM - Nomex Rubber (per Ford QVM) -- AC Hoses: Carrier "Quick Click" hose and fitting system -- GRILLE, Return Air: Stamped Powder Coated Steel -- Filter, Washable Carbon Pre-Filter Intake filter will face to the rear of the module. there will be components positioned under the talk thru. -- AC Register Panels: (Std) Direct Cold Air discharge through (4) Adjustable AC registers. (2) above Right Front Cabinet (2) in Electrical Cabinet door. -- Ducted AC Delivery: insulated & foil wrapped, 10 registers -- AC Control: Heat or AC and Fan Speed selector switches -- Espar Heater System: None CEILING PANELS : Gloss Mica over 1/4" hard plywood -- Dome Lts: LED, Intertek,(4) Streetside, (4) Curbside -- Timer, Constant Hot, Check out, 15 Minute Located on curbside wall at head of squad bench. -- Timer to Power: Street side DOMES, High intensity IV Hook No 1: CPI Rubber IV (Recessed Mount), ILOS LOCATION: Over head/chest area, primary patient on COT -- IV Hook No 2: CPI Rubber IV (Recessed Mount), ILOS LOCATION: Over head/chest area, secondary patient on S/B Recessed C/S Grab Rail, ceiling: 1.25 Dia 3 pt, 72in, Gray Antimicrobial Grab Rail will be recessed in a ABS pan. -- Streetside Grab Rail: None Insulation PKG: -- Insulation: Circumferential PKG, Reflective w/ Air cell core -- Insulation: Entry Door, Reflective w/ Air cell core -- Insulation: Floor, 1/2" Block Foam Generation 7 Floor Design -- Insulation: Walls/Ceiling, Additional : NONE -- Stepwell Insulation: None -- Light Bar Alternative, (4) Across Front, 92" or wider In Addition to Standard Front Three (3) Body Warning Lights. Seven (7) Total Lights Across Front of Body. -- Front of Module SLED System - 92" and wider (4) -- Whelen, 900 Super LED, (4), (2) WHITE & (2) RED Flasher for LED front of module Flanges: (4) 900-Chrome Flanges for lights above -- Light: Whelen 900, Super WHITE LED/CLEAR LENS, Programmable Lens color for Above LED Light to be: Clear

15 03/05/2014 Page 9 -- LED Color for Above 900 Super LED: WHITE LED Lights: Programmable, Single Light Light: Whelen 900, Super RED LED/RED LENS, Programmable Lens Color for Above LED Light to be: Red LED Color for Above 900 Super LED: RED LED Lights: Programmable, Single Light Alternative Lightbar Switching, Prim/Sec RED - PRIMARY/SECONDARY WHITES - PRIMARY -- Rear Light Bar: NONE LED WARNING LIGHT SYSTEM - F-series LTD -- Flasher: None, All Super LED's Are Programmable Fast, Alternate within each fixture, Random Flash unless otherwise specified. -- Flash Pattern: None, Internal Light Head Flasher -- Warning Light SWITCH: center console, Primary / Secondary -- Standard Pattern Table -- Pattern #9: ActionFlash Mirror Lights: NONE (2) Grille Lights: Whelen 5TIR6, LED, Chrome Flange Flanges: (2) Chrome, 5TIR6 Lights -- Lights: (2) Whelen 5TIR6, RED LED/CLEAR LENS -- Red LED -- Lens color for Above LED Light to be: Clear -- Additional Grille TIR-Lights: NONE -- (2) Front Intersection, Whelen LINZ6, SLED, Chrome Flange -- Light, Whelen LINZ6, RED S-LED, Chrome Flange Red LED Lens color for Above LED Light to be: Clear Add'l Side Warning Lights, : NONE (1) Center Front Warning Light : Whelen 900 (Super LED) Flange: (1) 900-Chrome Flanges for light above -- Light: Whelen 900, Super WHITE LED/CLEAR LENS, Programmable -- Lens color for Above LED Light to be: Clear -- LED Color for Above 900 Super LED: WHITE -- LED Lights: Programmable, Single Light (2) Front Warning Lts: Whelen 900, (Super LED) Flanges: (2) 900-Chrome Flanges for lights above -- Light: Whelen 900, Super RED LED/RED LENS, Programmable Lens Color for Above LED Light to be: Red LED Color for Above 900 Super LED: RED LED Lights: Programmable, Single Light (4) Side Warning Lts: Whelen 900, (Super LED) Flanges: (4) 900-Chrome Flanges for lights above -- Light: Whelen 900, Super RED LED/RED LENS, Programmable Lens Color for Above LED Light to be: Red LED Color for Above 900 Super LED: RED LED Lights: Programmable, Single Light

16 03/05/2014 Page Rear Intersection Lights, : NONE (2) Rear Warning Lts: Whelen 900, (Super LED) Flanges: (2) 900-Chrome Flanges for lights above -- Location: REAR, (1) in EACH Upper outer corner. -- Light: Whelen 900, Super RED LED/RED LENS, Programmable Lens Color for Above LED Light to be: Red LED Color for Above 900 Super LED: RED LED Lights: Programmable, Single Light (4) Rear Warning Lts: Whelen 900, (Super LED), IATS Flanges: (4) 900-Chrome Flanges for lights above -- Location: REAR, (1) aligned w/ EACH upper window in RA doors. LOCATE WINDOW LEVEL 900 LED LTS (1) LEFT SIDE AMBER, (1) RIGHT SIDE RED. LOCATE OTHER (2) 900 LED LTS INBOARD OF STANDARD REAR REDS. BOTH TO BE RED. -- Light: Whelen 900, Super (3) RED, (1) AMBER, Programmable Lens Color for Above LED Light to match LED color LED Color for Above 900 Super LED: (3) RED, (1) AMBER LED Lights: Programmable, Single Light (1) Rear Center AMBER Warning Lt: Whelen 900, (Super LED) Flange: (1) 900-Chrome Flanges for light above -- Light: Whelen 900, Super AMBER LED/AMBER LENS, Programmable -- Lens Color for Above LED Light to be: Amber -- LED Color for Above 900 Super LED: AMBER -- LED Lights: Programmable, Single Light Additional Kick Plate Lts, On Rear : NONE -- LED Program Switch : NONE -- ELECTRICAL - CELL 3 -- Customer Supplied Part(s) : NONE Rechargeable Flash Lt: Streamlight, LITE BOX, Installed The Streamlight LITE BOX will be yellow. Part number Location: M-3 Compartment, wall No #2, near wall #1 -- Powered: 12v Constant Hot Rechargeable Flash Lt: Streamlight SL-20XP, Installed Located on the passenger side of center console. Watch placement due to the computer docking station and components. Power constant hot. Batteries: 2 - Battery System - Type I Only -- Batteries: (2) Underhood (Type I)

17 03/05/2014 Page Battery Make: (2) OEM Battery Brand must match. -- Battery Switch: Cole Hersee Paddle, T1 center console Cole Hersee Paddle style battery switch powers up and shuts down the CONVERSION only! Chassis related circuits shall remain wired in the O.E.M. configuration per Ford QVM Bulletin No 63. SWITCH LOCATION: Drivers' side of center cab console. -- Batteries Wired: Parallel for higher amperage Dash Light : NONE -- Cabinet Interior Lights: None PWR Door Locks: Module Doors - Full Mod T1 -- Door Locks, Tied into OEM System Module power locks are tied to the Chassis power lock system -- DrLkSw: SPDT Momentary, (1) by C/S and (1) by Rr Dr OEM Key Fob: Included w/chassis Unlock Mod Doors Must also operate the Module Power Door Locks Optioned. -- ONLY the following doors shall have power door locks: -- Electric Door Lock: M1A Compt: (NONE) -- Electric Door Lock: (M-1) Left Front Compartment Electric Door Lock: (M-2) Left Middle Compartment Electric Door Lock: (M-3) Left Rear Compartment Electric Door Lock: Rear Access Doors Electric Door Lock: (M-5) Right Rear Compartment Electric Door Lock: (M-6.5) Right Wheel Well Compt Electric Door Lock: (M-6) Right Rear, Forward Compt Electric Door Lock: Curbside Access Door Electric Door Lock: (M-7) Right Front Compt Door Unlock Switch, Momentary, Exterior, hidden NOTE: Installation of Remote Door Lock Switch feature may increase likelihood of unauthorized entry into vehicle. By checking this option, purchaser further agrees to hold AEV or chassis manufacturer harmless for any loss of vehicle or contents caused by unlawful access. -- Location: Front Grille/Bumper Area Camera View System - NONE -- Camera View and Record System - NONE Circuit Board: RMR Rail System, W/ LED Diagram - Type I -- Master Switch: Front Only -- Circuit Protection, 12V: Blade Breaker - Manual-reset -- Sequencer/Load manager: NONE -- Ind Light Flasher: Thru 14S Flasher Unit -- Type I - CAB Console: Pass Thru - 14" OAW -- Cab Console SWITCH PANEL: Type I -- CHARGING SYSTEM GAUGE PACKAGE -- Volt Meter: (1) VDO, 8.0 thru 16.0 Volts, Analog -- Engraved LOGO: AEV TraumaHawk -- Indicator Light: AMBER Compt Open" light -- Flashing light: Activate w/ ANY compartment door switch.

18 03/05/2014 Page Indicator Light: GREEN "Amb Pwr" light -- Steady burn light: Activate with Conversion power switch -- Indicator Light: RED "Door Ajar" light -- Flashing light: Activate w/ ANY Mod entry door switch. -- Door/Compartment Ajar Buzzer: None -- Add-on Console: F-series console Drink Holder: NONE Note Book Slot: Single - Full width by 6" wide Double removable Lexan Divider(s) Customer Radio: Space for Customer installed Radio Heads -- Glove Storage: None -- Console Finish: Black, Textured "Easy Grip" Back-up Alarm: Standard -- Cut Off Switch: Auto reset,momentary style Ground Straps, Module to Frame: (Qty 4) Braided Grind/Clean each ground site on the O.E.M. frame to bare steel. Use 3/8" - UNC x 1 1/2", Grade 8 hex head bolts, Nuts, and external tooth lock washers. Tighten to minimum 20 Ft/Lb. Inverter : Vanner CUL-DC - Full Mod Portable Equip Charging Circuits: Included in Inverter -- PREWIRE LOCATION: (1)Cab Console, (1) Behind A/A -- Portable Equip Pwr Source: Ignition and/or Shoreline Reference and Figure 7 in KKK-A-1822E -- Battery Charger/Conditioner: 55A - Built into Inverter -- Built-in Battery Charger: Enable - Wire to Batteries -- Inverter Location: M-1A (ULF) Compartment Low Voltage Indicator: Amber with Buzzer COMMUNICATION RADIO(S) RELATED All radio power, antennas, and cables to be discussed at prebuild Radio Power No 1: 30A, Pos and Neg, 10 awg Wires -- Radio Power Source: Battery Switch Hot -- LOCATION: Behind Passenger's Seat -- Radio Power No 2: 30A, Pos and Neg, 10 awg Wires -- Radio Power Source: Battery Switch Hot -- LOCATION: Behind Action Area Board -- Coaxial Cable, No 1: Type RG-58U, No connectors -- ORIGINATION POINT: Roof Port No 1 Roof Port No 1 is located 36" back from the front edge of the module roof AND centered side to side. -- Port Plate: None - Access thru center upholstery panel -- TERMINATION POINT: Behind Passenger's seat w/ 36" Tail -- Patient Area Radio : None V SHORE LINE AND OUTLETS Shore Line Inlet: 20A Super Auto Eject, ILOS Yellow shoreline is for all items not associated with the 110v A/C system. -- Inlet location: Left Rear of Modular Box See "Drawing" -- Block Heater: Wire to shore line w/ Female plug

19 03/05/2014 Page Indicator Light, Shore line: Weather proof, power by SL, Red Indicator light located above shore line inlet. -- Cover, Yellow, Shore Line Inlet : 20A Super Auto Eject, STD Inpower Timer: VCM-50-01SF, Installed NOTE: This allows the auto eject to be wired to the ignition switch ILO splicing into the OEM starter circuit and is required any this vehicle Shore Line Inlet: 20A Super Auto Eject, IATS Blue shoreline is for Danhard A/C system -- Inlet location: Left Rear of Modular Box See "Drawing" -- Indicator Light, Shore line: Weather proof, power by SL, Red Indicator light located above shore line inlet. -- Cover, Blue, Shore Line Inlet : 20A Super Auto Eject, ILOS **125 Volt OUTLETS** VAC Outlet, No 1: 15A, Hospital Grade, IVORY All 125 VAC outlets shall be back lighted when power is applied to the outlet. -- LOCATION: Action Area, standard location -- Outlet mounting ORIENTATION: Vertical VAC Outlet, No 2: 15A, Hospital Grade, IVORY -- LOCATION: RF ALS, (See Drawing) -- Outlet mounting ORIENTATION: Vertical VAC Outlet, No 3: 15A, Hospital Grade, IVORY LOCATION: Extended Action Area, (See Drawing) -- Outlet mounting ORIENTATION: Vertical **INTERIOR 12 Volt OUTLETS** -- 12V Outlet, No 1: Cigar Style - Wire thru Med Isolator -- LOCATION: Action Area, standard location -- Outlet mounting ORIENTATION: Vertical -- Power Source: Medical Isolator, Batt Sw Hot V Outlet, No 2: Cigar Style - Wire thru Med Isolator -- LOCATION: RF ALS, (See Drawing) -- Outlet mounting ORIENTATION: Vertical -- Power Source: The SAME as outlet No V Outlet, No 3: Cigar Style - Wire thru Med Isolator LOCATION: Extended Action Area, (See Drawing) -- Outlet mounting ORIENTATION: Vertical -- Power Source: The SAME as outlet No 1 -- Siren: Whelen, 295HFS2, Standard F-Series -- Siren / Horn Switch: In Cab Console This switch shall select horn ring output: Siren Functions OR O.E.M. Horn

20 03/05/2014 Page 14 Speaker, Bumper, Whelen #SAK40/SAK41,F-Series Air Horn System: BUELL - F Air Horns ACTIVATION: Single Foot Switch / Solenoid Valve N Foot switch located on drivers side. -- Air Tank Mounted to Frame Rail -- Emergency Master Hot -- Compressor: Buell #6540, 20% Oil less Intermittent Duty -- Compressor Location: M1A Compartment -- Air Horn Location: Through Front Bumper, F-450 and F-550 Bracket Drwg # BRKT-HORNF1 Rev. B -- Left Air Horn: 10" Strombos Horn, Chrome, No 1061 (493 Hz) -- Right Air Horn: 12" Strombos Horn, Chrome, No 1062 (396 Hz) CABINET SHOP - Modular -- ALL DIMENSIONS ON ORDER WILL HAVE A VARIABLE OF + OR - 1/4" Unless specified as a minimum dimension. -- Mica Color: Matt Gray -- Polycarbonate Type/Color: Lexan - CLEAR -- Polycarbonate Handles: Full Length Extruded Attendant Seat: EVS, Vacuum Form, 3-Point Seat -- Attendant Seat: EVS, Light Gray, Vacuum Form, 3-Point Seat BASE: EVS Seats, Metal, Mica Covered Base, Match Unit Interior Door, Single Solid Flush Fitted -- TRIM: U-shaped Door, J-trim opening -- Hinge Orientation: BOTTOM -- Hinge: 1 1/2" Stainless Steel Piano Hinge -- Round Pull Latch: Non-locking - Chrome Finish Attendant Seat, Armrest: None -- AC CABINET: Evaporator, Std Location Behind Att Seat -- LF Cabinet, Behind Att Seat: Cabinet "H"/(Elec Cab) Have the door face the rear of the module like the A/C intake vent. There are components that will be install below the talk thru window. -- Plastic Vent: (2) Total, 1 column x 8 row, Vent Door, Single Solid Flush Fitted -- TRIM: U-shaped Door, J-trim opening -- Hinge Orientation: LEFT -- Hinge: 1 1/2" Stainless Steel Piano Hinge -- Lever Latch: Non-locking - Black Finish -- Cabinet, (3) Glove Storage, over C/S Entry Door Door: Overlay He, 3/8" Lexan - 3-glove dispense thru -- Catches: Brass Grabbers w/ Adj tension -- CURBSIDE UPPER: Over S/B, Mods Cabinet K: (1) Opening with set back center divider -- Door: Single Flip Up 3/8" Lexan -- Handle: "C" Handle W/ Reel Torque Hinges & Brass Grabber --

21 03/05/2014 Page 15 CURBSIDE REAR STORAGE CABINET: NONE -- RF ALS Cabinet: Custom, See Drawing -- Cabinet I-1: Top Left This is a small locking cabinet to the left of a larger top cabinet. See drawings and pictures of existing rescues -- Door, Single Solid Flush Fitted -- TRIM: U-shaped Door, J-trim opening -- Hinge Orientation: LEFT -- Hinge: 1 1/2" Stainless Steel Piano Hinge -- Round Pull Latch: Locking - Chrome Finish Cabinet I-2: Top Right -- Door: Single Solide Flush Fitted -- TRIM: U-shaped Door, J-trim opening -- Hinge Orientation: TOP -- Hinge: 1 1/2" Stainless Steel Piano Hinge -- Round Pull Latch: Non Locking - Chrome Finish Cabinet I-3: COMBINE STD I-2 & I-3 CABTS. SEE DRAWING -- Door, Single Solid, Flush - -- TRIM: U-shaped Door, J-trim opening -- Hinge Orientation: RIGHT -- Hinge: 1 1/2" Stainless Steel Piano Hinge -- Round Pull Latch: Locking - Chrome Finish Outside Access: Thru M-7 (RF) Compartment door. -- Interior MICA Color: White cabinet liner -- Shelf Track: Small alum Unistrut type (3) Shelves: Adjustable with Alum Trim Right Rear Cabinet: Cover over M-5 Compartment -- SQUAD BENCH: Set back at seating area Set back the seating area of the bench for a wider aisle. See drawings and pictures. There will be no storage under areas of the squad bench because of a drawer above the curbside rear wheel. -- See Upholstery Section for Post and Wheel Cup info -- Bio-waste/Sharps No 1: Roll-out DRAWER LOCATION: At head of Squad Bench, Roll out over step well -- WASTE CONTAINER: AEV 6 Quart -- SHARPS CONTAINER: 2-Gallon Sharps-A-Gator Storage Under Lid - Configure to M-6 and M6.5 Compartment Size -- Squad Bench Lid: Single, One pc, 1-section -- Hinge, Squad Bench Lid(s): Butt Style Hinges -- Latch, Squad Bench Lid(s): Slam Action Paddle, Non-loc -- Lid Checks: Gas shock, Dual Action -- Edge Trim, Lids: Band w/ Laminate and J-Trim Protection -- Restraint Net, Removable, at head of S/B, Black Webbing Black in color TOP CABINETS, - Standard -- Cabinet A: SEE DRAWING Note: Customer would like to talk about making the cabinets shallower because the

22 03/05/2014 Page 16 bins slide to the back. -- Shelf Track: Small alum Unistrut type (1) Shelf: Adjustable with Alum Trim -- Doors, Sliding Lexan, Mitered AL Assy: Restocking Hinged Top, Gas Shock installed to hold door open at 90 degrees. (2) slam action latches with decal "Latch Here" Labels Cabinet B: SEE BELOW B1 & B2 -- Shelf Track: Small alum Unistrut type (1) Shelf: Adjustable with Alum Trim -- Doors, Sliding Lexan, Mitered AL Assy: Restocking Hinged Top, Gas Shock installed to hold door open at 90 degrees. (2) slam action latches with decal "Latch Here" Labels WALL CABINET: NO CPR Seat w/extended Action Area Module action area does not have a CPR seat. review drawings and existing pictures. -- Action Area: Extended -- A/A Tray: Stainless Steel, with 3" Back splash LIPS: On all three sides and have a rear back splash. -- Bio-waste/Sharps A/A: None Action Area Board: See Station No 6 for content Computer Drawer: NONE -- Life Pak Bracket: Physio Control H7000 Bracket Monitor Mounting: Bolted in place Location: In Extended Action Area Cabinet Configuration: M-3 = 3/4 Height -- Cabinet C: DELETE -- Cabinet D: DELETE Cabinet E: DELETE Cabinet F: Custom, See drawing Customer would like to discuss at prebuild about making the cabinets shallower because the bins slide to the back. -- Doors, Sliding Lexan, Mitered AL Assy: Standard -- Polycarbonate Handles: Full Length Extruded CPR Side Seat: None, See Work Order for Specifics Telemetry Area: None Extend action area -- With 3/4" Lip --

23 03/05/2014 Page Cabinet J1: Above Talk Thru Doors, Sliding Lexan, Mitered AL Assy: Restocking Hinged Top, Gas Shock installed to hold door open at 90 degrees. (2) slam action latches with decal "Latch Here" Labels. -- (2) Shelves: Adjustable mica over substrate with Alum Trim (1) On each side of Divider -- Shelf Track: Small alum Unistrut type Cabinet J1: Below Talk Thru This cabinet is just an extension of the A/C intake cabinet that will allow a Norcold refrigerator to be installed below the talk thru. -- Stainless steel counter top on cabinet P6-6-Point Restraint System - with CPR Seat -- (3) on Squad Bench, (0) CPR Side Seat -- Squad Bench: (0) seating positions for 2-point, LAP, ALR -- S/B: (3) Sec patient restraints - 9" Sleeves Face of Bench -- S/B: (3) Sec patient restraints - 5" Sleeves By Hinge CABINET SET - CELL 4 - MOD Sub Floor, 3/4" Plywood, Standard -- Flooring: Loncoin II - #181, Nimbus Gray Flooring Main Edge: 3" Recessed (1/2" deep) roll-up Customer will discuss floor covering at prebuild. -- Rear Threshold, Stainless, 6" Wide x Full Width at rear doors Install safety yellow with diagonal stripes nonskid tape over threshold. -- C/S Stepwell Threshold, Polished Diamond Plate COT MOUNT HARDWARE: (Full Size Mod) Cot Mount: Ferno-Washington, FW 175-3, Mod, ILOS Cot Position No 1: CENTER POSITION Maintain 12" between Cot and S/B. -- Cot mount set up for: FW No 93 series -- Cot Stop, Block: Ferno-Washington Q Straint System: NONE Hanging Hardware: NONE OXYGEN / AIR / VACUUM System: -- Oxygen Outlet No 1: Amico Console - Ohio Diamond Style -- LOCATION: Action Area --

24 03/05/2014 Page Oxygen Outlet No 2: Amico Console - Ohio Diamond Style -- LOCATION: Action Area Oxygen Outlet No 3: Amico Console - Ohio Diamond Style LOCATION: Curbside Wall, over the head of the S/B Portable Cylinder Rack: Triple Holder D Spring Loaded at ALS/M Install a 3 position tank holder in the lower section of the M-7 compartment. see drawings. -- Rack No 1: M/H cylinder, AEV, Aluminum w/ (3) Ratchet Straps Hold-19 Ratchet Straps -- Neck Strap: Connected to top strap of bottle rack -- Cylinder Type: OXYGEN - Green Colored Hose Regulator connection Nut: 9/16" RH thread. -- Rack Location: Left Front, wall #2 near wall #3 -- Regulator Wrench: Cast aluminum, OXYGEN w/ cable lanyard Vacuum System: Impact #324, ILOS Collection Canister: Impact Disposable Container -- Vacuum Pump: Integrated in Unit PORTABLE SUCTION UNIT : NONE -- TRIM / DOOR ASSEMBLY - CELL 5 ****************DOOR DEPARTMENT - Full Mod****************** -- Handles, Ext: Tri-mark , Free Float, Polished CNNC finish -- Emergency Access Interior Release: NONE -- Entry Door Panels, Windows and Hardware -- Interior Grab Handle Color: Gray Antimicrobial -- Grab Handle, CS Entry: 1 1/4" Dia S/S, 2-pt 18"L, Gray Antimicrobial -- Grab Handles, Rear Access: (2) 12"L X 1 1/4" Dia S/S, 2-pt, Gray Antimicrobial -- Grab Rail, (3), 24" IATS, Gray Antimicrobial Located at the side entry door at the ALS cabinet (1) and at the rear of the module at the rear doors (2). See drawings. -- Door Panels: Mica Upper / Upholstery / Stainless Steel Lower The mica and stainless are laminated to smooth aluminum. -- Curbside Lower Door Panel: Stainless -- UPPER Windows: RA Doors, Fixed Glass 17.3"W x 19.3"H -- UPPER Window: CS Access, Fixed Glass, std tint Talk Through Window: Sliding Lexan Doors - CLEAR -- Sliding Window Locking Pin: 1/4" with Lanyard ELECTRICAL Point to Point - CELL 6 -- IV Warmer No 1: NONE -- Fan, Pancake, 12V and Vent Installed In Lower ALS Cabinet Install a 12v Fan and Vent Cover on Inward lower side of the ALS cabinet. See drawing. Exact Location TBD.

25 03/05/2014 Page 19 Refrigerator, Norcold 2.7 Cu Ft, 12VDC / 125VAC, Location: Under the talk thru in cabinet J2 -- Fan, (2) Speed, Patient Area, w/ separate switch in A/A NEAR ACTION AREA FORWARD WALL Action Area Light: 12V, LED, Surface Mount -- Light Location: Action Area Extende Action Area Light: 12V, LED, Surface Mount Light Location: Bottom of Cabinet B1 UPHOLSTERY - CELL 7 Upholstery Color: Light Gray -- Center Trough Upholstery Color: Color Key to Rest of Truck -- Uph Joint Type: Vacuum Formed - Seamless Squad Bench seat cushion cut-outs: None -- Post And Wheel Cups: NONE Head Protection: Pad over CS Entry Door Head Protection: 2" Pad over Rear Access Doors, Full Width PAINT - STRIPES - DECALS -- Anti Rust Spray, Detco: Installed on Unit Purchasing to buy 12 Aerosol Cans NOTE: To be Sprayed to Chassis Frame before the Body is Mounted -- Undercoating : Per QVM Guidelines, STD Reflective Tape: On painted edges of Exterior Door Frame Compartment Finish: Other than Diamond Plate Paint Shop to Refer to Body Section of Shop Order for Details. Located in compartments, the compartments are smooth aluminum with sprayed bedliner material because of the ocean salt water. Paint, Overall, Body, State Color Paint color to be: Tape Stripe: NONE - DELETE (KKK-F Deviation) Paint, Overall, Cab, State Color Paint color to be: Black paint to be applied in wheelwell area under tilt hood. -- Roof Paint: Color and finish quality to be GLOSSY The roof shall be painted, with a glossy finish, but not sanded and buffed. Pin Stripe: NONE -- Special Striping: Chevron Items: NONE Lettering: NONE -- Drip Rails: Bright Aluminum, De-burred and rounded corners Include a drip rail over the C/S Entry Door.

26 03/05/2014 Page 20 DETAIL - SHIP LOOSE ITEMS -- (3) Placard Holder, 12" x 12", Top Load, Aluminum "U" Trim style (Shipped Loose) W/ Painted Placard Ship loose (3) Anodized placard holders with painted 12" x 12" inserts. The inserts will be painted to match module. ETR will install unit numbers Drip Rails: Detail-Refer to Paint Section for Drip Rail Information Include a drip rail over the C/S Entry Door. -- *Check front of W/O under chassis section for Addt'l items* Amico O2 Minder, Transducer: NONE Glove Holder, Ship Loose: NONE -- Decals: KKK / DOT Pkg, - NONE/DELETE Decals: Star of Life for Mod Roof - NONE/DELETE Decals: NO SMOKING & SEATBELT, installed, cab & pt. area. -- AEV Logos: Installed on unit per AEV standard locations Fire Extinguisher, 5 pound, shipped loose, Std Reflector Pkg: Body - 2ea, Side Fr Amber, Side Re Red, Rear Stick-on reflectors: Peterson "Spitfire" B484R and B484A LOCATIONS: In lower corners of module (2) - (1) each side and Front - AMBER (2) - (1) each side and Rear - RED (2) - On Rear of body - RED -- STD Regulator, Oxygen, Fixed 50 psi +/-5, CGA 540, Ship Loose Post And Wheel Cups: NONE Spare Tire: Refer To Chassis Section to See if it gets one. Primary Cot: NONE included -- Secondary Stretcher: NONE included -- Indemnification Statement The purchaser agrees to defend, indemnify and hold AEV harmless from any claims, costs (including actual attorneys' fees), damages and liabilities caused in whole or in part by any alteration or modification of, or changes or additions to the Purchased Products OR use of product for purposes it was not designed or intended for. == 172 x 95 T-1 LWB Ford Base Price /07/11 == GENERAL CONVERSION 2014 **172** F x 2 and CONV PKG ***END OF ORDER*** Subtotal 176,270.97

27 03/05/2014 Page 21 GPC Discount QC734-4, FSA Pricing Discount -7, Total 164,991.97

28

29

30

31

32

33

34

35