DIVIDE. Panels CDN D i v i d e T M

Transcription

1 PANELS

2 DIVIDE Divide is a modular desk-mounted partition system that can be retro-fitted on many Global Desks Divide utilizes Divide Posts which support a variety of Partitioning Panels The panels can be vertically stacked to provide varying degrees of privacy The panels are available in laminate or fabric tackboards as well as glazed panels that allow light to pass through Divide is offered in many laminate and fabric colour options to complement any office environment Panels CDN D i v i d e T M DIVIDE POSTS: Divide Posts are field installed A threaded Mounting Plate is attached with screws to the top side of a worksurface The Divide Post is then bolted to the Mounting Plate Each Divide Post includes: (1) Post Mounting Plate, (1) Threaded Rod, (3) Cover Strips, (1) Top Cap and all Mounting Hardware Installation Templates are supplied with each project Black (BLK) or Silver (SIL) epoxy finish Divide posts are available in 6 standard heights: - 12 high - to create semi-private spaces and to support Transaction Tops - 18 high - to create semi-private spaces - 24 high - to create semi-private spaces - 30 high - to create semi-private spaces - 36 high - to create private spaces and to match the height of adjacent 36 high hutches and/or 65 cabinets (Genoa, Adaptabilities and Zira Series) - high - To create private spaces and to match the height of adjacent high hutches and/or 72 cabinets (Correlation and Zira Series) PARTITIONING Available in 4 standard heights: 12, 18, 24 and 36 high modules and a variety of standard lengths PANELS: Panels are available in 3 materials: 1 Laminate - Offered in all standard finishes for Adaptabilities, Correlation, Genoa and Zira Series - Standard black accent edging at top and bottom - Optional wire access scoop cut-outs are offered, standard in position 2 centred at the bottom of the panel Please specify code SCP2 and add $ Glazed - New Glazing options are available in Frosted Glazing (GF), Clear Glazing (GC), Ribbed Glazing (RG) - Top and bottom rail standard in black (BLK) or Silver (SIL) epoxy finish - Top rail designed to accommodate off-desk accessories 3 Fabric - Available in Agate II, Lola, Brinx, Mariposa Coordinate and Accent panel fabrics; see Divide Unit Prices (ie: DTB1220 $ 18900) which apply to the above panel fabrics Universe, Tracery and Meander (Meander is upholstered horizontally) also available, please Contact Customer Service for pricing and availability - Most Global seating fabrics can be used on Divide Tackboards Top and bottom rail standard in Black (BLK) or Silver (SIL) epoxy finish - Top rail designed to accommodate off-desk accessories Note: Divide Posts and Partitioning Panels are sold separately Panels are 55 less wide than stated widths TRANSACTION 1 thick to complement Adaptabilities, Genoa and Zira,1½ thick to complement Correlation and TOPS: Zira Transaction Tops include all necessary flat mounting-plates and joining plates Transaction Tops are offered in all standard finishes for Adaptabilities, Correlation and Zira lines A radiused end is available on one or both ends of the Transaction Tops Each adds 6 overhang Transaction Tops feature pre-drilled locating holes that allow quick alignment with Divide Post Transaction Tops are only to be used on 12 high divide posts Taller posts are not safe Note: Transaction Tops shipped with mounting hardware All 1 tops feature a 3 mm edge in a matching colour (ie wood grain surface features edging with matching printed wood grain) All 1½ tops also offer an optional fluted edge ( FL ) to match Correlation worksurfaces Customer must specify code FL when placing order (ie DCTT36FL) All 1½ thick transaction tops are available in Correlation and Zira laminate finishes To order a radius end on one side of a transaction top, add the suffix D to the model number (ex DATT30D) Add a 15% upcharge To order a radius end on both sides of a transaction top, add the suffix DD to the model number (ex DATT30DD) Add a 20% upcharge Each radius end adds a 6 overhang per side (see illustrations below) 4

3 6 6 Transaction Top is offset 6 from edge of worksurface in both directions 36 DATT36D A245C A3030LK Transaction Top Offset - 4 from the centre of the Divider Post to the inside of worksurface - 8 from the centre of the Divider Post to the outside of worksurface EDGE DETAIL: All surfaces have a 3 mm PVC printed matching edge on all sides All tops are available with matching edging only Edging cannot be specified separately No substitutions LAMINATE FINISHES: FABRICS: A3030LK DATT30D Transaction Top is offset 4 from the centre of Divider Post towards the inside and 8 toward the outside Radius End Transaction Top - one side Add suffix D to model number for radius end on one side Absolute Acajou ACJ Asian Night ASN Avant Cherry AWC Avant Honey AWH Black BLK Brushed Cobalt BRC Constellation Java CSJ Dark Espresso DES Grey GRY Hayden Gray HGT Quartered Mahogany QTM See Page 14 for fabric and colour options 6 DATT2W 6 30 DATT A3030L DATT30DD DATT30D Two Way Connector Transaction Top (DATT2W/DCTT2W) Use with a corner worksurface to link transaction tops together Radius End Transaction Top - two sides Add suffix D to model number for radius end on one side Shaker Cherry SKC Storm Grey SOG Tiger Fruitwood TFW Tiger Mahogany TMA Tiger Maple TMP Tiger Walnut TWL White WHT White Chocolate WHC Willow Grey WGY Winter Cherry WCR Panels CDN M T e d i v i D 5

4 D i v i d e Panels CDN D i v i d e T M Parts and Components Transaction Top Joining Plate Laminate Panel 'Scoop' (optional) Laminate Filler Panel Screws Transaction Top Transaction Top Flat Plate Fabric Tackboard Divide Post Accessory Rail (built in) Top Cap Glazed Panel Cover Strip Locking Nut Washer Threaded Rod Post Mounting Plate Divide Post Cover Strip

5 D i v i d e 12" High system 18" High system 24" High system 30" High system 36" High system " High system 36" panel 24" panel 18" panel 18" panel 18" panel 24" panel 12" panel 18" panel 12" panel 12" panel 12" panel 18" panel 12" panel 12" panel 12" panel 18" panel 12" panel 12" panel 12" POST 18" POST 24" POST 30" POST 36" POST " POST D i v i d e T M Panels CDN 5

6 DIVIDE - Posts Panels CDN Divide 12"- " H DPOST $240 DPOST $212 DPOST $189 DPOST $136 DPOST $99 DPOST $71 Divide Post Includes 1 post, 1 mounting plate, 1 top cap, 3 cover strips, threaded rod and all mounting hardware Installation templates supplied with each post DIVIDE - Panels DGP $4 DGP $435 DGP $401 DGP $334 DGP $277 DGP $248 DGP $212 DGP $212 DGP $180 DGP $155 12" High Glazed Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DGP1229, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton 12" H DGP $522 DGP $485 DGP $9 DGP $373 DGP $309 DGP $277 DGP $240 DGP $240 DGP $202 DGP $180 18" High Glazed Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DGP1829, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton 18" H 8

7 DIVIDE - Panels 24" H DGP $8 DGP $565 DGP $518 DGP $9 DGP $362 DGP $321 DGP $274 DGP $274 DGP $226 DGP $202 24" High Glazed Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DGP29, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton DGP $747 DGP $694 DGP $635 DGP $522 DGP $4 DGP $389 DGP $330 DGP $330 DGP $274 DGP $248 36" High Glazed Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DGP3629, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton 36" H DTB $4 DTB $385 DTB $350 DTB $302 DTB $284 DTB $263 DTB $245 DTB $245 DTB $209 DTB $189 12" High Fabric Tackboard Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DTB1229, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton 12" H Panels CDN Divide 9

8 DIVIDE - Panels Panels CDN Divide 18" H DTB $482 DTB $9 DTB $350 DTB $321 DTB $291 DTB $291 DTB $263 DTB $263 DTB $217 DTB $202 18" High Fabric Tackboard Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DTB1829, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton DTB $499 DTB $461 DTB $435 DTB $358 DTB $334 DTB $305 DTB $288 DTB $288 DTB $226 DTB $209 24" High Fabric Tackboard Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DTB29, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton 24" H DTB $688 DTB $0 DTB $640 DTB $528 DTB $482 DTB $453 DTB $309 DTB $309 DTB $263 DTB $245 36" High Fabric Tackboard Panel Features built-in accessory rail Includes matching filler panel NOTE: Specify DTB3629, for panels placed along the depth side of 30 deep worksurfaces 1 set per carton 36" H 550

9 DIVIDE - Panels 12" H DLP $151 DLP $136 DLP $124 DLP $112 DLP $99 DLP $84 DLP $77 DLP $77 DLP $62 DLP $51 12" High Laminate Panel Includes matching filler panel NOTE: Specify DLP1229, for panels placed along the depth side of 30 deep worksurfaces For wire management scoop option specify SCP2 Add $ set per carton DLP $180 DLP $162 DLP $147 DLP $133 DLP $117 DLP $99 DLP $86 DLP $86 DLP $71 DLP $62 18" High Laminate Panel Includes matching filler panel NOTE: Specify DLP1829, for panels placed along the depth side of 30 deep worksurfaces For wire management scoop option specify SCP2 Add $ set per carton 18" H DLP $209 DLP $189 DLP $170 DLP $151 DLP $112 DLP $133 DLP $99 DLP $99 DLP $80 DLP $71 24" High Laminate Panel Includes matching filler panel NOTE: Specify DLP29, for panels placed along the depth side of 30 deep worksurfaces For wire management scoop option specify SCP2 Add $ set per carton 24" H Panels CDN Divide 551

10 DIVIDE - Panels Panels CDN Divide 36" H DLP $263 DLP $240 DLP $217 DLP $189 DLP $164 DLP $1 DLP $124 DLP $124 DLP $99 DLP $90 36" High Laminate Panel Includes matching filler panel NOTE : Specify DLP3629, for panels placed along the depth side of 30 deep worksurfaces For wire management scoop option specify SCP2 Add $ set per carton DIVIDE - Accessories 12"- " H Post-to-Wall Filler Strip Used to fill gap between DIVIDE POST and adjacent wall, wardrobe units or hutch Available in Black thermally fused laminate only DFS $ DFS $ DFS $ DFS $ DFS $ DFS $ 552

11 DIVIDE - Transaction Tops 14"- 72" W DATT $284 DATT $284 DATT $236 DATT $236 DATT $189 DATT $189 DATT $1 DATT $1 DATT $1 DATT $94 DATT $94 DATT $94 DATT $94 DATT $94 1" Thick - Straight Transaction Top 12 deep, includes all necessary flat plates, joining plates and Edge screws For radius end on one side, add D to model number (ie DATT72D) 15 % upcharge For radius end on both sides, add DD to model number (ie DATT72DD) 20% upcharge Each radius end adds 6 overhang per side NOTE: Transaction tops are only to be used on 12 high DIVIDE POST Taller posts are not safe Transaction tops must be ordered with a panel below for support Specify DATT23 or DATT29 transaction top when placed along the depth side of 24 or 30 worksurfaces " D 36" D 1" Thick - Gallery Corner Transaction Top One-piece is to be used on 36 and five-sided corners Cut out maximizes use of worksurface for a computer screen Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs in one direction Transaction tops are only to be used on 12 high DIVIDE POST Taller posts are not safe " D 36" D 1" Thick - Gallery Corner Transaction Top Two-piece is to be used on 36 and five-sided corners Cut out maximizes use of worksurface for a computer screen Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs in two directions along the width of each transaction top Transaction tops are only to be used on 12 high DIVIDE POST Taller posts are not safe 1 set per carton DA1GC $0 DA1GC $0 Edge DA2GC $0 DA2GC $0 Edge Panels CDN Divide 553

12 DIVIDE - Transaction Tops 36" D DA2GCL $575 Panels CDN Divide 1" Thick - Extended Gallery Corner Transaction Top Left Two-piece is to be used on 30" x " desktop D radius end on long transaction top Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs in two directions along the width of each transaction top Transaction tops are only to be used on 12 high DIVIDE POST Taller posts are not safe 1 set per carton 36" D 1" Thick - Extended Gallery Corner Transaction Top Right Two-piece is to be used on 30" x " desktop D radius end on long transaction top Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs in two directions along the width of each transaction top Transaction tops are only to be used on 12 high DIVIDE POST Taller posts are not safe 1 set per carton 12" D 1" Thick - 2 Way Connecting Top Used to change direction (90 corner) Deduct 6 from each side adjoining the corner piece Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs diagonally in one direction For user s safety, transaction tops are only to be used on 12 high DIVIDE POST 12" D 1" Thick - 4 Way Connecting Top Used to link 4 intersecting transaction tops Deduct 6 from each side adjoining the corner piece Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs diagonally in one direction For user s safety, transaction tops are only to be used on 12 high DIVIDE POST Edge DA2GCR $575 Edge DATT2W $164 Edge DATT4W $1 5

13 DIVIDE - Transaction Tops 14"- 72" W DCTT $353 DCTT $353 DCTT $305 DCTT $305 DCTT $2 DCTT $2 DCTT $212 DCTT $212 DCTT $212 DCTT $1 DCTT $1 DCTT $1 DCTT $1 DCTT $1 1 1/2" Thick - Straight Transaction Top 12 deep, includes all necessary flat plates, joining plates and Edge screws For radius end on one side, add D to model number (ie DCTT72D) 15% upcharge For radius end on both sides, add DD to model number (ie DCTT72DD) 20% upcharge Each radius end adds 6 overhang per side NOTE: For user s safety, transaction tops are only to be used on 12 high DIVIDE POST Transaction tops must be ordered with a panel below for support Specify DCTT23 or DCTT29 transaction top when placed along the depth side of 24 or 30 deep worksurfaces " D 36" D 1 1/2" Thick - Gallery Corner Transaction Top One-piece to be used on 36 and five-sided corners Cut out maximizes use of worksurface for a computer screen Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs in one direction For user s safety, transaction tops are only to be used on 12 high DIVIDE POST " D 36" D 1 1/2" Thick - Gallery Corner Transaction Top Two-piece to be used on 36 and five-sided corners Cut out maximizes use of worksurface for a computer screen Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs in two directions along the width of each transaction top Transaction tops are only to be used on 12 high DIVIDE POST Taller posts are not safe 1 set per carton DC1GC $694 DC1GC $694 Edge DC2GC $503 DC2GC $503 Edge Panels CDN Divide 555

14 DIVIDE - Transaction Tops 12" D DCTT2W $236 Panels CDN Divide 1 1/2" Thick - 2 Way Connecting Top Used to change direction (90 corner) Deduct 6 from each side adjoining the corner piece Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs diagonally For user s safety, transaction tops are only to be used on 12 high DIVIDE POST 12" D 1 1/2" Thick - 4 Way Connecting Top Used to link 4 intersecting transaction tops Deduct 6 from each side adjoining the corner piece Includes all necessary flat plates, joining plates and screws NOTE: Wood grain runs diagonally For user s safety, transaction tops are only to be used on 12 high DIVIDE POST Edge DCTT4W $

15 eo+ Engineered to meet the discriminating needs of today s small business office and manufactured to address today s environmental sustainability concerns eo+ extruded aluminum panel frames are made from remelt billets (recycled aluminum) whenever possible and can be recycled almost endlessly Honeycomb panel cores are made from 30% recycled card stock The entire eo+ panel is recyclable at the end of its life Worksurface cores are 45lb density particle board made from 100% recycled woodchips All brackets and metal storage components consist of up to 30% recycled steel that can be again recycled Durable epoxy powder coating used on all metal components contains no harmful VOC s or lead e O + FINISHES METAL COMPONENTS FINISH CODE Panel Frame Black or Tungsten 2 BLK or TU2 90 Corner Posts Black or Tungsten 2 BLK or TU2 Conduit Corner Post Black or Tungsten 2 BLK or TU2 Panel to Wall Connectors Black or Tungsten 2 BLK or TU2 Shelves Black or Tungsten 2 BLK or TU2 Overhead Storage Units Black or Tungsten 2 BLK or TU2 Pedestals Black or Tungsten 2 BLK or TU2 Legs Black or Tungsten 2 BLK or TU2 Transaction Top Connectors Black or Tungsten 2 BLK or TU2 HARDWARE & ACCESSORIES FINISH CODE Wire Troughs Black BLK Pencil Drawer Black BLK Casters Black BLK Off-Desk Accessories Black or Frosted BLK or FR Power Bar Black BLK Vertical Wire Manager Black or Tungsten 2 BLK or TU2 E Series Pull Handles Black BLK Panel Grommets Black or Grey BLK or GRY Flush Plates Black BLK Kick Plate Black or Tungsten 2 BLK or TU2 Brackets and Connectors Black or Tungsten 2 BLK or TU2 WORKSURFACES LAMINATE CODE * NOTE: 25% upcharge for WOODGRAIN FINISHES on CORNER WORKSURFACE There is a 25% upcharge to cover the cost of material to diagonally produce the following components in woodgrain patterns: Corner Curved Worksurface Keyboard Worksurface Corner Corner Curved Worksurface with Keyboard Support Non-Symmetrical Corner Curved Worksurface Non-Symmetrical Corner Keyboard Worksurface L Transaction Tops Absolute Acajou* ACJ Asian Night* ASN Avant Cherry* AWC Avant Honey* AWH Black BLK Brushed Cobalt BRC Constellation Java CSJ Dark Espresso* DES Grey GRY Hayden Gray HGT Quartered Mahogany* QTM Shaker Cherry* SKC Storm Grey SOG Tiger Fruitwood* TFW Tiger Mahogany* TMA Tiger Maple* TMP Tiger Walnut* TWL White WHT White Chocolate* WHC Willow Grey WGY Winter Cherry* WCR Panels CDN Revised August 27,

16 Panels CDN e O + PANEL FABRIC: SHIPPING: PANEL SHIPPING: 100% polyester panel fabric Go to globaltotalofficecom for complete colour selection Grade 3 Grade 4 Grade 5 Grade 6 Lola Brinx Accent Universe Mariposa Tracery Coordinate Meander Shipped RTA (Ready To Assemble),, unless otherwise noted Shipped CUBIC FEET stated reflects TOTAL cubic footage WEIGHT stated reflects the weight of ONE PANEL How to calculate Transaction Top CUBIC FOOTAGE (W x D x H ) divided by 1728 = Cubic Feet Example: If Transaction Top required is 21 long (21 x 12 x 1125) divided by 1728 = 0164 Round this up to the nearest cube in this case 1 cubic foot How to calculate Transaction Top SHIPPING WEIGHT Use the following formula: WIDTH REQUIRED x 12 x 1125 x 0031 Example: If you require a 20 Transaction Top: 20 x 12 x 1125 x 0031 = 837 lbs eo+ WORKSTATIONS WITH OVERHEAD STORAGE UNITS INSTALLATION RULES IMPORTANT: When specifying and installing eo+ workstations with overhead storage units (shelves and overheads) and/or worksurfaces, the following rules must be followed Failure to adhere to these rules may compromise the integrity of the installation and void the warranty RULES: #1 Panels supporting overhead storage units and/or worksurfaces must be vertically stabilized These panels must have worksurfaces attached to the panels using any combination of the following: A Mid-Support Gables (EMSG2xxP) B Full End Gables (EFEG2xxP) C Worksurface Supporting Pedestals with Pedestal Connecting Brackets (GWPSxxxxF/EPTPBK) Wing panels that are the same width as the depth of the D worksurface and incorporate a set of Corner Brackets (EEWSB) #2 Panels supporting overhead storage units must have panels of equal height on either side C A A B D A C 55

17 #3 The width of an overhead storage unit must correspond with the width of the supporting panel eo+ PANELS GENERAL #4 Wherever possible balance the layout by using the same size and type of overhead storage unit on both sides of the same panel This type of layout will ensure strait panel runs #5 48 and wide overhead storage units require corner posts and wing panels on both sides of the supporting panel #6 A run of panels without worksurfaces should be no longer than 9-0 and must be supported with (A) wing panels at both ends, (B) a wing panel at one end and a Self-Supporting Foot (EESF-1) at the other end, or (C) (not shown) a wing panel at one end and a Floor Mount (EFM) at the other end Note: Floor Mounts must be bolted to the floor Rigid aluminum box frame construction Slotted verticals provide load bearing capabilities Finished in durable epoxy powder coating Patented knuckle-loc design ensures solid panel-to-panel connection Universal corner post (no separate two-way, three-way, four-way) Tackable honeycomb core Self-levellers ensure even panel heights All panels include two full length capture strips 2 glide adjustment Multiple fabric options PANEL eo+ s load bearing frames accepts worksurfaces 29 H in height Off-desk accessory bars are at FRAMES: high The open shelves are at 50 H An Overhead Storage Cabinet can only be used on the H Panel and the top of the cabinet must be even with the top of the H Panel GLAZED To let light into a workstation and to create a more open office, panels may be ordered with a glazed option PANELS: Partially Glazed Panels start at 31 from the floor As a no charge option, partially glazed panels starting from the floor can be ordered Please specify 31 or high on order Fully and Partially Glazed Panels are available in the following finishes: Please specify CPG for clear Plexiglas panels Please specify SPG for smoked Plexiglas panels Please specify FPG for frosted Plexiglas panels Panels CDN e O + 559

18 Panels CDN e O + SPECIAL Custom heights and widths are available for all panels PANEL SIZES: For custom size pricing use next size up plus 10% Example to price a 33 wide x high fabric panel, use EEP36 $ $ 33 = $ 369 To order use code EEP33 Panel heights CANNOT exceed Panel widths CANNOT exceed WALL ACCESS PANEL: PARTIAL WHITEBOARD PANELS: PANEL GROMMETS: 18 opening in base of panel (from 2 above the floor to 20 ) to allow easy access to Electrical and Data Wall Outlets NOTE: This option can also be specified for improved air flow Add $ to the fabric panel list price Add WAP to the panel model number EG EEP36-WAP Wall Access Panels are not available on Fully Glazed Panels and Full Whiteboard Panels Wall Access Panels are available on Partially Glazed Panels and Partial Whiteboard Panels Panels may be ordered with whiteboards in the upper portion of the panel on either one side or both sides TO ORDER PARTIAL WHITEBOARD PANEL TO ORDER PARTIAL WHITEBOARD PANEL ON ONE SIDE ON TWO SIDES You first specify the panel side which faces you INNER SIDE and then OUTER SIDE of the panel You first specify the panel side which faces you INNER SIDE and then OUTER SIDE of the panel Example: EPP36 $ Example: EPPP36 $ diameter Panel Grommets allow wires and cables to pass through eo+ panels Add $ 6900 to list price of panel Position specification: EEPG300-1 EEPG300-2 EEPG300-3 EEPG300-4 EEPG300-5 EEPG300-6 NOTE: WB F Panel Grommets NOT available on Fully Glazed Panels or in the EPG300-1 & EPG300-4 position on a Partially Glazed Panels When ordering grommets in Partial Whiteboard Panels, orient the panel as shown above Specify Panel Grommet finish: Black (BLK) or Tungsten 2 (TU2) F EPP36/WB/BX01/BX02 WB F WB EPPP36/WB/BX01/WB/BX02 34 above panel bottom & 4 in from the right panel edge (above worksurface) 26 above panel bottom & 4 in from the right panel edge (beneath worksurface) 8 above panel bottom & 4 in from the right panel edge 34 above panel bottom & 4 in from the left panel edge (above worksurface) 26 above panel bottom & 4 in from the left panel edge (beneath worksurface) 8 above panel bottom & 4 in from the left panel edge 34" EPG300-4 worksurface 26" EPG300-5 F 34" EPG " EPG " EPG " EPG "

19 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS eo+ Fabric Panel 18"- 36" Wide Tackable fabric panel Capture strips included Must specify fabric options For fabric options refer to page 558 Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EEP36 EEP36 EEP36 EEP30 EEP30 EEP30 EEP3030 EEP24 EEP24 EEP24 EEP2430 EEP18 EEP18 EEP18 EEP Panels CDN eo+ 561

20 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS Panels CDN eo+ eo+ Fabric Panel "- " Wide Tackable fabric panel Capture strips included Must specify fabric options For fabric options refer to page 558 Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EEP EEP EEP EEP EEP EEP EEP48 EEP48 EEP48 EEP EEP EEP

21 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS eo+ Panel With Partial Whiteboard - One Side - 18"- 36" Wide Partial whiteboard on one side begins 31" above the bottom of the panel Capture strips included Full fabric on the opposite side Must specify fabric options For fabric options refer to page 558 Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EPP36 EPP36 EPP36 EPP30 EPP30 EPP30 EPP24 EPP24 EPP24 EPP18 EPP18 EPP Panels CDN eo+ 563

22 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS Panels CDN eo+ eo+ Panel With Partial Whiteboard - One Side - "- " Wide Partial whiteboard on one side begins 31" above the bottom of the panel Optional partial whiteboard starting at " above the panel bottom available at no charge Add PG to panel code Example: EPP36-PG Capture strips included Full fabric on the opposite side Must specify fabric options For fabric options refer to page 558 Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EPP EPP EPP EPP EPP EPP EPP48 EPP48 EPP48 EPP EPP EPP

23 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS eo+ Panel With Partial Whiteboard - Two Sides Partial whiteboard on both sides begins 31" above the bottom of the panel Optional partial whiteboard starting at " above the panel bottom available at no charge (both sides must be same height) To specify, add PG to panel code Example: EPPP36-PG Capture strips included Must specify fabric options For fabric options refer to page 558 Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EPPP EPPP EPPP EPPP EPPP EPPP EPPP48 EPPP48 EPPP48 EPPP EPPP EPPP EPPP36 EPPP36 EPPP36 EPPP30 EPPP30 EPPP30 EPPP24 EPPP24 EPPP24 EPPP18 EPPP18 EPPP Panels CDN eo+ 565

24 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS Panels CDN eo+ eo+ Panel With Full Whiteboard On One Side, Fabric On The Other Side Full whiteboard on one side Full fabric on the opposite side Must specify fabric options For fabric options refer to page 558 Wire management grommets are available at upcharge of $ 6900 Capture strips included See page 5 for grommet location EFPP EFPP EFPP48 EFPP48 EFPP48 EFPP EFPP EFPP EFPP36 EFPP36 EFPP36 EFPP30 EFPP30 EFPP30 EFPP24 EFPP24 EFPP24 EFPP18 EFPP18 EFPP

25 Model Description Number Unit Width Depth Height Weight Volume Price IN IN IN LB FT 3 MM MM MM KG M 3 eo+ PANELS eo+ Panel With Full Whiteboard - Two Sides Full whiteboard on both sides Capture strips included Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EFFP EFFP EFFP48 EFFP48 EFFP48 EFFP EFFP EFFP EFFP36 EFFP36 EFFP36 EFFP30 EFFP30 EFFP30 EFFP24 EFFP24 EFFP24 EFFP18 EFFP18 EFFP Panels CDN eo+ 567

26 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 eo+ PANELS Panels CDN eo+ 568 eo+ Panel - Partly Glazed Glazed portion begins 31" above the bottom of the panel Optional glazing starting at " above the panel bottom available at no charge Must specify glazing and fabric options Capture strips included Wire management grommets are available at upcharge of $ 6900 See page 5 for grommet location EEPPG EEPPG EEPPG EEPPG EEPPG EEPPG EEPPG48 EEPPG48 EEPPG48 EEPPG EEPPG EEPPG EEPPG36 EEPPG36 EEPPG36 EEPPG30 EEPPG30 EEPPG30 EEPPG24 EEPPG24 EEPPG24 EEPPG18 EEPPG18 EEPPG

27 Model Description Number Unit Width Depth Height Weight Volume Price IN IN IN LB FT 3 MM MM MM KG M 3 eo+ PANELS eo+ Panel - Fully Glazed Full glazing available in 3 finishes Must specify glazing and frame finish options Capture strips included EEPFG EEPFG EEPFG48 EEPFG48 EEPFG48 EEPFG EEPFG EEPFG EEPFG36 EEPFG36 EEPFG36 EEPFG30 EEPFG30 EEPFG30 EEPFG24 EEPFG24 EEPFG24 EEPFG18 EEPFG18 EEPFG Panels CDN eo+ 569

28 eo+ PANEL ACCESSORIES Panels CDN eo+ 2" D Panel 90 Corner Posts Enables 90, 3-way and 4-way connections Lightweight aluminum with Black (BLK) or Tungsten 2 (TU2) epoxy paint Includes two capture strip panel connectors 2" D Extended Panel Conduit/Corner Post Enables 90, 3-way and 4-way connections 1" high allows cabling to be carried from floor to ceiling Lightweight aluminum with Black (BLK) or Tungsten 2 (TU2) epoxy paint Includes two capture strip panel connectors 2" D Panel 120 Corner Post Enables 3-way connection to only the E120WS48 worksurface 1" high allows cabling to be carried from the ceiling to the floor Lightweight aluminum in Black (BLK) or Tungsten 2 (TU2) epoxy paint Includes two strip panel connectors " H " H " H EP $ EP $47 EP $36 EP $33 EP $159 ETP $174 ETP $74 ETP $61 ETP $50 EEPS $8 EEPS $8 EEPS $8 Pair Of Panel Capture Strips Extruded PVC channel connects two panels, in a straight line, or a panel and a corner post Runs the full height of the panel on both sides providing strong connection Two strips required per panel Price shown for 1 pair 570

29 eo+ PANEL ACCESSORIES 025" D Panel To Wall Connector Connects a run of panels to a wall Lightweight aluminum with Black (BLK) or Tungsten 2 (TU2) epoxy coating Includes two capture strip panel connectors Price shown for 1 piece Self-Supporting Foot Price shown for 1 piece Floor Mount Available in Chrome only Price shown for 1 piece 2" D Plastic Kick Plate Attaches to the bottom of the fabric panels to protect them from damage caused by vacuums, etc TU2 or BLK EPWC $31 EPWC $26 EPWC $22 EPWC $17 EESF $24 EFM $17 EEOKP $47 EEOKP $46 EEOKP $39 EEOKP $36 EEOKP $31 EEOKP $28 EEOKP $25 EEOKP $22 EOCG $14 Panels CDN eo+ Carpet Gripper Fits on the adjustable glides of the panel This helps stabilize the panel Available in Black (BLK) only Price shown for a package of

30 eo+ WORKSURFACES Panels CDN e O + Worksurfaces are 1 1/8 thick, 45 pound density particleboard covered on both sides with thermally fused laminate Available in 18, 24 and 30 deep worksurfaces Monolegs that come included with worksurfaces are 2 square All worksurfaces have threaded inserts for metal to metal connection of support hardware Power and communication cables are routed through cable scoops at the back of the worksurfaces Back edge scoop detail sits 3/8 away from the face of a panel for wire management Straight and transitional worksurfaces and over have two scoops All other worksurfaces have one scoop All worksurfaces feature 3mm PVC edging on all sides in matching colour All connection hardware must be ordered separately Custom widths and depths are available for all Worksurfaces Price of the product next size up plus 10% IMPORTANT: More complex Custom requests require a custom quotation Please contact the MTM Coordinator Custom orders must indicate the Custom Quote Number and List Price There can be no changes to the quote Changes necessitate a new quote eo+ TRANSACTION TOPS Tops are 1 1/8 thick, 45 pound density particleboard covered on both sides with thermally fused laminate Available in 12 depth only To get a Custom Width, ie ETT1232 take the next larger size ETT1236 plus 10% Connecting hardware not included L Transaction Top (ELCTT90) covers 12 of a panel 3mm PVC edging on all sides with matching colour Tops are centered over the panel EDTT1224 ELCTT90 EOCK3618 EOTL2430 EDTT12 Two-Way Connector Transaction Top (ELCTT90) used to link transaction Tops together at 90 57

31 eo+ WORKSURFACES " D 24" D 18" D EOR $264 EOR $249 EOR $240 EOR $222 EOR $202 EOR $193 EOR $140 EOR $120 EOR $112 EOR $251 EOR $240 EOR $231 EOR $202 EOR $176 EOR $148 EOR $107 EOR $104 EOR $99 EOR $230 EOR $193 EOR $179 EOR $157 EOR $140 EOR $124 EOR $111 EOR $90 EOR $90 Straight Worksurface Straight rectangular worksurfaces are non-handed and can be interchanged on site For finish options, refer to page 557 Panels CDN eo+ 573

32 eo+ WORKSURFACES Panels CDN eo+ Left Right " D 24" D 30" D 24" D EOTL $290 EOTL $269 EOTL $271 EOTL $239 EOTL $222 EOTL $212 EOTL $152 EOTL $133 EOTL $128 EOTL $273 EOTL $2 EOTL $247 EOTL $220 EOTL $210 EOTL $175 EOTL $152 EOTL $128 EOTL $124 EOTR $290 EOTR $269 EOTR $271 EOTR $239 EOTR $222 EOTR $212 EOTR $152 EOTR $133 EOTR $128 EOTR $273 EOTR $2 EOTR $247 EOTR $220 EOTR $210 EOTR $175 EOTR $152 EOTR $128 EOTR $124 Transition Worksurface Transitional front edges allow efficient use of small footprint When deepest end equals 24, the opposite depth is 18 When deepest end equals 30, the opposite depth is 24 For finish options, refer to page

33 eo+ WORKSURFACES Corner Curved Worksurface For finish options, refer to page " D " D 36" D 48" D " D Corner Curved Worksurface With Keyboard Support Keyboard support is 11 deep, adjusts 8 above and 6 below surface with a positive/negative tilt (+15 o to -15 o ) Keyboard mechanism is included For finish options, refer to page Corner Keyboard Worksurface For finish options, refer to page " D " D 36" D 48" D " D 36" D Non-Symmetrical Corner Curved Worksurface For finish options, refer to page 557 EO90C $475 EO90C $474 EO90C $375 EO90C $347 EO90C $256 EO90C $2 ESKC4830P $1288 ESKC4824P $1288 ESKC30P $1139 ESKC24P $1023 EOCK $437 EOCK $474 EOCK $437 EOCK $351 EOCK $320 EOCK $2 EC $474 EC $474 EC $347 EC $347 EC $347 EC $347 EC $258 EC $258 EC $256 EC $256 Panels CDN eo+ 575

34 Description Model Dimension Weight Volume Unit Glazed HP eo+ WORKSURFACES Panels CDN eo " D " D EK $474 EK $474 EK $347 EK $347 EK $347 EK $347 EK $258 EK $258 Non Symmetrical Corner Keyboard Worksurface For finish options, refer to page Left 36 36" D 24" D 24" D Right Keyboard Extended Worksurface There are three cable scoops on this worksurface Woodgrain laminate option not available on the diagonal For finish options, refer to page 557 ELKL $488 ELKR $

35 eo+ WORKSURFACES " D " D 36" D ELL $7 ELL $718 ELL $647 ELL $592 ELL $550 ELL $691 ELL $671 ELL $623 ELL $527 ELL $525 ELL $671 ELL $647 ELL $574 ELL $524 ELL $477 ELL $671 ELL $623 ELL $551 ELL $524 ELL $477 ELL $574 ELL $550 ELL $516 ELL $4 ELL $406 ELL $328 Extended Curved Corner - Left There are three cable scoops Woodgrain laminate option not available on the diagonal For finish options, refer to page 557 Panels CDN eo+ 577

36 eo+ WORKSURFACES Panels CDN eo " D " D 36" D ELR $7 ELR $718 ELR $647 ELR $592 ELR $550 ELR $691 ELR $671 ELR $623 ELR $527 ELR $525 ELR $671 ELR $647 ELR $574 ELR $524 ELR $477 ELR $671 ELR $623 ELR $551 ELR $524 ELR $477 ELR $574 ELR $550 ELR $516 ELR $4 ELR $406 ELR $328 Extended Curved Corner - Right There are three cable scoops Woodgrain laminate option not available on the diagonal For finish options, refer to page Left 36" D 36" D EMG3672LP $8 EMG3672RP $ Right Hatchet Worksurface Cable scoop is in the centre of the 36 wide edge Includes 2 square monoleg Woodgrain laminate option not available on the diagonal For finish options, refer to page cartons

37 eo+ WORKSURFACES " D ED3072IP $375 ED30IP $339 ED3048IP $317 "D" Worksurface Cable scoop is at the centre of the end Includes 2 square monoleg For finish options, refer to page cartons panel width panel width Left Right 24" D 24" D 24" D 120 Degree "D" Curved Worksurface Cable scoop is at the centre of the panel width edge Includes 2 square monoleg For finish options, refer to page cartons Left " D 24" D 30" D ED2472IP $340 ED24IP $315 ED28IP $2 ED24IP $257 ECWSDL48P $9 ECWSDLP $853 ECWSDL36P $802 ECWSDR48P $9 ECWSDRP $853 ECWSDR36P $802 EP30726LP $519 EP306LP $485 EP306LP $362 EP24720LP $432 EP240LP $340 EP240LP $320 EP240LP $298 EP30726RP $519 EP306RP $485 EP306RP $362 Panels CDN eo+ Right "P" Top Worksurface Cable scoop is at the centre of the end Includes 2 square monoleg For finish options, refer to page cartons 24" D EP24720RP $432 EP240RP $340 EP240RP $320 EP240RP $

38 eo+ WORKSURFACES 30" D 24" D ELC3030L $215 ELC24L $122 Panels CDN eo+ Left 18" D 30" D 24" D 18" D ELC1818L $74 ELC3030R $215 ELC24R $122 Right ELC1818R $74 Quarter Round Panel Worksurface The worksurface edge running along the panel face is a slightly different length than that of the worksurface end, causing the surface to be handed The user edge abutting the adjacent worksurface runs straight for 3 before starting to curve For finish options, refer to page

39 eo+ WORKSURFACES Left Right Wedge Worksurface Two cable scoops on the back side of worksurface Includes 2 square monoleg Conference end is 10 wider than A For finish options, refer to page cartons 30" D 24" D 30" D 24" D EWWS3084LP $562 EWWS3078LP $528 EWWS3072LP $492 EWWS30LP $458 EWWS30LP $1 EWWS2484LP $500 EWWS2478LP $473 EWWS2472LP $433 EWWS24LP $404 EWWS24LP $375 EWWS3084RP $562 EWWS3078RP $528 EWWS3072RP $492 EWWS30RP $458 EWWS30RP $1 EWWS2484RP $500 EWWS2478RP $473 EWWS2472RP $433 EWWS24RP $404 EWWS24RP $375 Panels CDN eo+ 581

40 eo+ WORKSURFACES 255" D EORW24P $332 18" 24" 18"24" 195" D EORW18P $2 Panels CDN eo " and 24" Radius Worksurface Rounded worksurface for conferencing provides a radius corner from a worksurface to worksurface Includes 1 square monoleg Radius cut out on the straight edge allows space for cable drop For finish options, refer to page cartons 30" 30" 315" D 30" Radius Worksurface Rounded worksurface for conferencing provides a radius corner from a worksurface to worksurface Includes 2 square monolegs Radius cut out on the straight edge allows space for cable drop For finish options, refer to page cartons 46" D 120 Degree Worksurface Attaches to two 48" panels and one 120 o Post For finish options, refer to page " D EORW30P $498 E120WS $9 ETT $213 ETT $197 ETT $179 ETT $162 ETT $146 ETT $128 ETT $114 ETT $106 ETT $90 ETT $83 ETT $69 ETT $58 ETT $46 Straight Transaction Top Attaches to the top of " panel Connecting hardware not included For connecting hardware, see page 584 For finish options, refer to page 557

41 eo+ WORKSURFACES 12" D EDTT $204 EDTT $188 EDTT $169 EDTT $147 EDTT $132 EDTT $121 EDTT $105 EDTT $95 "D" Transaction Top Used at the end of a panel run where surface can overhang Attaches to the top of " panel Connecting hardware not included For connecting hardware, see page 584 For finish options, refer to page " D Double "D" Transaction Top Top overhangs the panel by 6" on either end Attaches to the top of " panel Connecting hardware not included For connecting hardware, see page 584 For finish options, refer to page " D "L" Transaction Top Used where two panels meet at a 90 angle Covers 12" of a panel Attaches to the top of " panel Connecting hardware not included For connecting hardware, see page 584 For finish options, refer to page " D Three Way Corner Transaction Top To connect three way transaction tops; two at 180 degrees, the other at 90 degrees, deduct 8" from the width of each adjoining transaction top Attaches to the top of " panel Connecting hardware not included For connecting hardware, see page 584 For finish options, refer to page 557 EDDTT $215 EDDTT $175 EDDTT $1 EDDTT $137 ELCTT $86 EOTT3W $171 Panels CDN eo+ 583

42 eo+ WORKSURFACES 19 19" D EOTT4W $ Panels CDN eo+ Four Way Corner Transaction Top To connect four transaction tops at 90 degrees, deduct 8" from the width of each adjoining transaction top Attaches to the top of " panel Connecting hardware not included For connecting hardware, see page 584 For finish options, refer to page " D Single Transaction Top Connector Transaction top to corner post connector Fits into corner post Plastic corner cap must be removed Price shown for one piece TU2 or BLK 275" D Single Transaction Top Connector Transaction top to panel connector Fits into panel frame Plastic top cap must be removed Price shown for one piece TU2 or BLK eo+ SUPPORT HARDWARE Corner Bracket - Set Set of left and right worksurface brackets Price shown for one pair TU2 or BLK ETTCPOSTC $24 ETTPANELC $24 EEWSB $21 EEWSBL $10 Corner Bracket - Left Left worksurface bracket Price shown for 1 piece TU2 or BLK 584

43 eo+ SUPPORT HARDWARE EEWSBR $10 Corner Bracket- Right Right worksurface bracket Price shown for 1 piece TU2 or BLK 30" D 24" D 18" D Full End Gable Attaches a worksurface to panel with two connecting brackets Provides solid support of a worksurface Includes EPTEGBK bracket kit Wood grain pattern in vertical direction For finish options refer to page " D 10" D Mid-Supporting Gable A) Provides support to a worksurface spanning two panels B) Used to support and link two adjoining worksurfaces Includes EPTSGBK bracket kit Wood grain pattern in vertical direction For finish options refer to page 557 Pedestal Connecting Bracket Kit Screws to the back of the pedestal at top and bottom Brackets connect pedestal to panel Note: Price shown for a pair of brackets TU2 or BLK EFEG30P $219 EFEG24P $148 EFEG18P $137 EMSG230P $138 EMSG224P $138 EPTPBK $14 Panels CDN eo+ 585

44 eo+ SUPPORT HARDWARE EFB $10 Panels CDN eo+ Flat Bracket Assures alignment on adjoining worksurfaces of the same height Available in Black (BLK) only Price shown for 1 piece Left Right Panel To Desk Connector With Velcro Attaches flush end gable of freestanding desk to end of panel Fits into panel slot Price shown for 1 piece TU2 or BLK EEOPBL $10 EEOPBR $10 586

45 eo+ STORAGE COMPONENTS PEDESTALS: Worksurface Supporting Pedestals are 2762 high and can directly support worksurfaces by screwing through the top of the pedestal and into the underside of the worksurface A Pedestal Connecting Bracket (EPTPBK) secures the pedestal to a panel Freestanding Pedestals are 2712 high and can slide in under a panel attached worksurface Cannot be converted to mobile pedestals in the field Lock is included Steel construction for durability Looped full pull or Soft touch Hytrel TM drawer fronts available One pencil tray included with each pedestal that has a box drawer Box drawers have ¾ extension steel ball bearing suspension File drawers have fully progressive steel ball bearing suspension Side rails accommodate letter and A4 metric size hanging folders File bars included for legal size hanging file folders for 19, 23 /24 and 29 /30 Levellers provide 1 adjustment e O + PANEL All panel attached storage is constructed of steel for durability ATTACHED Overhead Storage Units do not come with locks STORAGE: Interior dimensions of Overhead Storage Unit are depth 11 3/4 and height 12 Shelf is 12 deep and has back lip to protect panel fabric PERSONAL STORAGE TOWERS: LOCKS: Personal Storage Towers have Looped Full Pull fronts to match G Series pedestals Locks are included Levellers provide 1 adjustment Locks are standard on front of pedestal Locks for Overheads with retracting doors can be ordered for field installation only Please specify model number: ESLOCK, add $ 2500 All keying is random All components within a workstation or a private office can be keyed alike All workstations or private offices can be keyed differently For up to 150 key numbers, the delivery time for specified keying are standard There is no upcharge for the service NOTE: To order specified keying, tag each component of each workstation or office with a lock number between Your shipping documentation and invoicing will confirm both the specified lock number and any other tagging instructions for each component Please consult your Customer Service Representative NOTE: Custom widths and depths are NOT available for Pedestals, Panel Attached Storage and Personal Towers Matching, 9300P Series Lateral file and storage options See Global Total Office Price List s Table of Contents or Filing Section Panels CDN

46 G SERIES PEDESTALS 2762" H GWPS30BBF $7 GWPS24BBF $402 GWPS19BBF $395 Panels CDN eo+ Worksurface Supporting Pedestal Two box and file pedestal Designed to support worksurface Looped full pull Lock mounted on the right hand side One pencil tray and one plate divider included Levelling glides are standard 2762" H Worksurface Supporting Pedestal Two file pedestal Designed to support worksurface Looped full pull Lock mounted on the right hand side Levelling glides are standard 2712" H Free Standing Pedestal Two box and file pedestal with levelling glides Looped full pull Lock mounted on the right hand side one pencil tray and one plate divider included 2712" H Free Standing Pedestal Two file pedestal with levelling glides Looped full pull lock mounted on the right hand side Matches the height of two high lateral files GWPS30FF $7 GWPS24FF $402 GWPS19FF $395 GWP29BBF $7 GWP23BBF $402 GWP19BBF $395 GWP29FF $7 GWP23FF $402 GWP19FF $

47 G SERIES PEDESTALS 2181" H GMP29BF $435 GMP23BF $0 GMP19BF $0 Mobile Pedestal Pedestals on casters Looped full pull Lock mounted on the right hand side One pencil tray and one plate divider EOP SERIES PEDESTALS 2762" H Worksurface Supporting Pedestal Two box & file pedestal Designed to support worksurface File drawer supports letter size hanging file folders Soft Hytrel TM pull handles Levelling glides are standard One pencil tray and one plate divider included 2762" H Worksurface Supporting Pedestal Two file pedestal Designed to support worksurface File drawer supports letter size hanging file folders Soft Hytrel TM pull handles Levelling glides are standard 2712" H Freestanding Pedestal Two box and file pedestal Soft touch Hytrel TM pull handles Levelling glides are standard One pencil tray and one plate divider included EWPS30BBF $470 EWPS24BBF $407 EWPS19BBF $407 EWPS30FF $462 EWPS24FF $398 EWPS19FF $398 EWP29BBF $470 EWP23BBF $407 EWP19BBF $407 Panels CDN eo+ 589

48 EOP SERIES PEDESTALS 2712" H EWP29FF $462 EWP23FF $398 EWP19FF $398 Panels CDN eo+ Freestanding Pedestal Two file pedestal Soft touch Hytrel TM pull handles Levelling glides are standard 9300 PLUS PERSONAL TOWER Left 24" D 24" D Two File Personal Tower 5 high personal tower 65 1/4"h Ventilated wardrobe and locker compartments Two file drawers, 3 locks keyed alike Looped full pull handles 93PT-2FL - has wardrobe on the left side 93PT-2FR - has wardrobe on the right side Left 24" D 24" D Box/File Personal Tower 5 high personal tower 65 1/4"h Ventilated wardrobe and locker compartments, 2 box and 1 file drawers, 3 locks keyed alike Looped full pull handles 93PT-2BFL - has wardrobe on the left side 93PT-2BFR - has wardrobe on the right side 93PT-2FL $ PT-2FR $ PT-2BFL $ PT-2BFR $

49 OVERHEAD STORAGE 12" D ECOL $107 ECOL $104 ECOL $101 ECOL $94 ECOL $90 ECOL $82 ECOL $78 12" Deep Shelf Low profile shelf 12" deep panel-mounted storage shelf with back lip that protects fabric Includes all attachment hardware TU2 or BLK ECOF $469 ECOF $436 ECOF $401 ECOF $367 ECOF $334 ECOF $301 ECOF $291 12" Deep Overhead Overhead with retracting doors Door retracts up and over the cabinet Inside dimensions /2" high x 11 3/4" deep Lock not included " unit is reinforced for proper weight distribution TU2 or BLK 12" D Locking Kit Locking kit for overhead flipper door storage cabinet Includes two keys Can only be field installed TOP SURFACES 30" D 24" D 1962" D Pedestal Top Surface eo+ top surface EEP1915/EEP25 - for freestanding or mobile pedestal For finish options, refer to page 557 ESLOCK $25 Key Number EEP $135 EEP $83 EEP $82 Panels CDN eo+ 591

50 eo+ ACCESSORIES EEPH $13 Panels CDN eo+ Pencil Holder ABS plastic pencil holder Mounts on the off-desk accessory rail BLK or FROSTED (FR) Phone Support ABS plastic telephone tray Mounts on the off-desk accessory rail BLK or FROSTED (FR) Paper Tray ABS plastic paper tray Mounts on the off-desk accessory rail BLK or FROSTED (FR) Binder Holder ABS plastic Tray Mounts on the off-desk accessory rail BLK or FROSTED (FR) CD Holder ABS plastic CD Holder Holds up to 10 compact discs Mounts on the off-desk accessory rail BLK or FROSTED (FR) EEPS $38 EEPT $46 EEBH $30 EECH $25 592

51 eo+ ACCESSORIES EESFH $49 Slanted File Holder ABS plastic Slanted file holder Mounts on the off-desk accessory rail BLK or FROSTED (FR) Organizer Tray ABS plastic organizer tray Mounts on the off-desk accessory rail BLK or FROSTED (FR) Accessory Clip ABS plastic accessory clip Included with all accessory rail organizers Attaches off-desk accessories to rail BLK or FROSTED (FR) Coat Hook For Panel Top Available in Black (BLK) paint Price shown for one piece 075" D EEOT $35 EEAH $3 EECTH $17 EARC $1 EARC $138 EARC $120 EARC $110 EARC $104 EARC $99 EARC $92 Accessory Rail With Brackets Accommodates off-desk accessories Attaches to panel edge using pre-installed brackets Finished in Black (BLK) and Tungsten 2 (TU2) epoxy coating Panels CDN eo+ 593

52 eo+ ACCESSORIES EEPD $97 Panels CDN eo+ Pencil Drawer Provides storage for writing instruments and small items at the worksurface Attaches to the underside of the worksurface with included drawer slides Black ABS plastic 25" D Whiteboard Easel Double-sided whiteboard for use with any dry erase markers Two Black (BLK) or Tungsten2 (TU2) epoxy coated 18 gauge steel "A- Frame" legs with locking casters PVC tray holds markers and erasers Also suitable for use as a presentation screen or privacy panel Corner Keyboard Plate Converts two 1 1/8" thick worksurfaces forming a 90 corner into a 45 o keyboard support corner Finished in Black (BLK) and Tungsten2 (TU2) epoxy coating eo+ ELECTRICAL COMPONENTS Adapt Power/Data Module Consisting of two electrical outlets, spaces for two data outlets with adaptors Data plugs not provided 6' power cord Black (BLK) only EESL $659 EESL $502 EEOCKS $59 EUEDM $

53 eo+ ELECTRICAL COMPONENTS EUTEM $119 Mini-Adapt Power Module Attaches to scoop, 6' long cord Black (BLK) only Mini-Adapt Data Module Attaches to scoop, spaces for two data outlets with adaptors Data plugs not provided Black (BLK) only 6 power cord Panel Mount Power Bar Includes 4 receptacles, 2 data jack adapters, 2 cord management channels, sliding bracket and bezel tree Rating: 120/240V, 20LINE (15A CSA), 1ph Hz 6' Cord Black (BLK) only Power Cable Interconnecting power entry cable 180 long cord to connect to modules - limited to 8 Black (BLK) only EUTDM $96 EPMAWPB $348 EPMAWPB $3 EPMAWPB $339 EPMAWPB $331 EIPEC $270 EITTTJC $100 Panels CDN eo+ Jumper Cable Interconnecting table to table jumper cable 74 long cord For in between modules Black (BLK) only 595

54 eo+ ELECTRICAL COMPONENTS EITTTJC $109 Panels CDN eo+ Jumper Cable Interconnecting table to table jumper cable 96 long cord Black (BLK) only Interconnecting Electrical/Data Monument Attaches to scoop Consisting of two electrical outlets and two data outlets Data plugs not provided Black (BLK) only Interconnecting Electrical Monument Attaches to scoop Consisting of two electrical outlets Black (BLK) only Cord Cover For closed overhead to worksurface TU2 or BLK EIEDM $192 EIEM $128 ECCCO $12 ECCCOS $12 Cord Cover For open shelving to worksurface TU2 or BLK 596

55 eo+ ELECTRICAL COMPONENTS EVWM $35 Vertical Wire Manager From underside of worksurface to bottom panel Capable of holding electrical and data wires in a vertical position Black (BLK) only EWM $101 EWM $85 EWM $77 EWM $67 EWM $ EWM $51 EWM $ EWM $35 EWM $26 EWM $18 Wire Manager 2 w x 2 h plastic tray flexes to receive and then hold electrical and data wires Quickly attaches with two strips two sided tape BLK only Task Light T5 rapid start florescent lamp provides energy efficient illumination Slim, low profile metal chassis Electronic ballast Prismatic acrylic lens included 9 black cord with two cord management clips Task light must be specified at least 6 shorter than the storage component to which it will be installed Specify cord cover separately For metal surfaces only BLK only EOVET5L $110 EOVET5L $100 EOVET5L $93 EOVET5L $88 Panels CDN eo+ 597

56 GPS AND GPS II PANELS TRANSACTION TOPS Panels CDN G P S & G P S I I GPS is comprised of seven freestanding dividers designed for quick and easy, "no installation" privacy Can be used with any casegood or modular desk system, storage accessories can be mounted GPS II is a MODULAR panel system that can be used with Adaptabilities, Correlation and Zira to address reception, privacy and/or storage needs New painted frame finish to match seating metal finishes GPS and GPS II are available in 4 fabric grades See the Textiles and finishes section, under Panel Fabrics, for fabric details See below for COM fabric information IMPORTANT: Layout diagram with dimensions must accompany every order for GPS II and/or transaction tops to ensure configuration accuracy GPS II and transaction top connectors must be ordered separately GPS AND GPS II PANELS FABRIC Grade 2 Grade 3 Grade 4 Grade 5 COORDINATE LOLA ACCENT NAME AGATE II BRINX MARIPOSA CONTENT 100% Polypropylene 100% Polyester 100% Polyester 100% Polyester NOTE: COORDINATE and ACCENT fabrics cannot be specified on 72 wide panels FRAME: GPS Panels available in Black and Chrome ONLY GPS II available Chromed (CHM) or low gloss, epoxy coated paint in Black (BLK), Business Grey (BGR) or Nevada (NEV)PLEASE SPECIFY No additional charge GPS II frames are also available Fabric Wrapped (FW) PLEASE SPECIFY Add $ 2800/panel See your fabric cards for colour codes For example: GF30FW2 LL12 Means: GF30" Full fabric screen 36" wide x " high FW" Fabric wrapped frame 3" In Grade 3 fabric LL12" Carmel Cream colour PARTIALLY AND Please specify CPG for clear plexiglass panels FULLY GLAZED Please specify SPG for smoked plexiglass panels PANELS: Please specify FPG for Frosted plexiglass panels Add 10% upcharge CONSTRUCTION: One inch square steel tube frame structure Panel core features a tackable, honeycomb substrate covered with fabric 72" high panels are upholstered vertically due to the width of fabric rolls GPS II: The bottom edge of the Plexiglas window is " off the floor on partially glazed and 7" on fully glazed 598 FEET: GPS Panels have chromed or black self-supporting feet as standard GPS II has 2½" glides allowing for 2" height adjustment as follows: - Two levelling glides per STRAIGHT panel - Three levelling glides per CURVED panel Glides can be replaced with optional self-supporting feet in chrome or coordinating frame colours

57 GPS II SIZING: Panels are built ⅜" wider than nominal width to allow panels to wrap around desk Note: Panel "creepage" will occur on long straight runs 90 degree Connections add 1/16" per panel, 180 degree Connections add 1/16" per panel, Three-way and four-way connections add ⅛" per panel SPECIAL SIZES: Available for GPS II and transaction tops ONLY Add 10% to the price of the product next size up Add 15% for glazed panels ONLY Example: For the price of GF33 Take product next size up Price of GF30 = $ 280 Add 10% $ 280 x 110 rounded to the nearest dollar = $ CUSTOMERS OWN Fabric must be approved by Global Upholstery MATERIAL (COM): Fabric width must be a finished " Global Upholstery is not responsible for COM - imperfection or irregularities - sagging - shrinking before or after fabric is secured to panels Note: All pricing is to be calculated in the request size and in Series I fabric COM yardages required are indicated for fully upholstered panels Please call for yardage required for glazed panels G P S & G P S I I TRANSACTION TOPS: GPS Transaction Tops are 1⅛" thick, 45 pound density particleboard covered on both sides with thermally fused laminate Depth - 12" Width - increments of ½" up to 84" GPS Transaction Tops are available in all Global laminate finishes 3mm PVC edging on all sides with matching colour EDTT1224 EOCK3618 EOTL2430 ELCTT90 EDTT12 Two-Way Connector Transaction Top (ELCTT90) used to link transaction Tops together at 90 ORDERING: All connecting hardware must be ordered separately PLEASE SPECIFY For more details, see the connectors section at the end of this section Make sure that you have specified all fabric and frame information required IMPORTANT: Layout diagram with dimensions must accompany every order to ensure configuration accuracy SHIPPING: All panels shipped 1 PER CARTON CUBIC FEET stated reflects TOTAL cubic footage WEIGHT stated reflects the weight of ONE PANEL Panels CDN 5

58 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 Panels CDN GPS & GPSII GPS - FREESTANDING PANEL DIVIDERS Note PLEASE SPECIFY all substitutions and options Versatile range of freestanding panels Panels are shipped with legs detached and neatly concealed inside frame for ease of cartoning and shipping Shipped See GPS II for more freestanding options including curved radius and glazed panels (Note: Levelling glides must be substituted for self-supporting feet) Call for COM yardage requirements Special sizes - not available GPS - Freestanding Panel Dividers Flush Freestanding Panel Divider GPS Screen to floor 1" Black or Chromed square tube steel frame and Black or Chromed feet TACKABLE substrate core covered in GPS fabric GPS GPS Raised Freestanding Panel Divider GPS Screen 12" off floor 1" Black or Chromed square tube steel frame and Black or Chromed feet TACKABLE substrate core GPS covered in fabric GPS GPS II - FULLY UPHOLSTERED STRAIGHT PANELS Note PLEASE SPECIFY all substitutions and options Straight fully upholstered panels Chromed (CHM) or painted frames in Black (B), Business Grey (BGR) or Nevada (NEV) are standard Fabric wrapped (FW) frames available PLEASE SPECIFY Add $ 2800/panel Fully upholstered panels are shipped Overhead storage units can be mounted Call for COM yardage requirements Special sizes available - take price of next size up + 10% GPS II - Fully Upholstered Straight Panels 72" High Fully Upholstered Straight PanelGF " square tube steel frame Two levelling glides per panel Panel core is TACKABLE substrate covered in fabric GF GF GF GF GF

59 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 GPS II - Fully Upholstered Straight Panels " High Fully Upholstered Straight PanelGF 1" square tube steel frame Two levelling glides per panel Panel core is TACKABLE substrate covered in fabric GF48 GF GF36 GF30 GF24 " High Fully Upholstered Straight PanelGF72 1" square tube steel frame Two levelling glides per panel Panel core is TACKABLE substrate covered in fabric GF GF48 GF GF30 GF30 GF24 " High Fully Upholstered Straight PanelGF72 1" square tube steel frame Two levelling glides per panel Panel core is TACKABLE substrate covered in fabric GF GF48 GF GF36 GF30 GF Panels CDN GPS & GPSII 1

60 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 Panels CDN GPS & GPSII 2 GPS II - Fully Upholstered Straight Panels " High Fully Upholstered Straight PanelGF72 1" square tube steel frame Two levelling glides per panel Panel core features TACKABLE substrate covered in fabric GF GF48 GF GF36 GF30 GF24 GPS II - GLAZED PANELS Note PLEASE SPECIFY all substitutions and options Glazed panels - full, partial and radius Chromed (CHM) or painted frames in Black (BLK), Business Grey (BGR) or Nevada (NEV) are standard Fabric wrapped (FW) frames available PLEASE SPECIFY Add $ 2800/panel See introduction page for explanation on how to order frame, finish and fabric series colours All glazed panels are shipped Call for COM yardage requirements Special heights available - take price of next size up + 10% GPS II - Glazed Panels 72" High Partially Glazed Straight Panel GH Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is " above the floor 1" square tube steel frame Two levelling GH glides per panel Panel core is TACKABLE substrate covered in fabric GH GH GH GH " High Partially Glazed Straight Panel GH Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is " above the floor 1" square tube steel frame Two levelling GH glides per panel Panel core is TACKABLE substrate covered in fabric GH GH GH GH

61 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 GPS II - Glazed Panels " High Partially Glazed Straight Panel Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is " above the floor 1" square tube steel frame Two levelling glides per panel Panel core is TACKABLE substrate covered in fabric 72" High Fully Glazed Straight Panel Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is 7" above the floor 1" square tube steel frame with two levelling glides " High Fully Glazed Straight Panel Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is 7" above the floor 1" square tube steel frame with two levelling glides GH GH48 GH GH30 GH30 GH24 GS72 GS4872 GS72 GS3672 GS3072 GS2472 GS GS48 GS GS36 GS30 GS Panels CDN GPS & GPSII 3

62 Model Description Number Grade Unit Price Width Depth Height Weight Volume IN IN IN LB FT MM MM MM KG M 3 GPS II - Glazed Panels Panels CDN GPS & GPSII " High Fully Glazed Straight Panel Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is 7" above the floor 1" square tube steel frame with two levelling glides " High Fully Glazed Straight Panel Features a Smoked (SPG) or Clear (CPG) Plexiglas window that is 7" above the floor 1" square tube steel frame with two levelling glides GS GS48 GS GS30 GS30 GS24 GS GS48 GS GS36 GS30 GS

63 Usage Model Description Price PANEL CONNECTORS IMPORTANT: Panel Connectors are used to connect panels They CANNOT BE USED IF A TRANSACTION TOP IS APPLIED See Transaction Top Connectors on the following page for appropriate replacements if you require a Transaction Top PB1 PB2 PB2V Top cap top of square post 180 connector, equal height Connects 2 panels of equal height at connector, variable height Connects 2 panels of variable height at G P S & G P S I I PB2L 90 connector, equal height Connects 2 panels of equal height at PB2LV Left 90 connector, variable height Connects 2 panels of variable height at PB2RV Right 90 connector, variable height Connects 2 panels of variable height at PB3 T connector, equal height Connects 3 panels of equal height at a common 3-way intersection 1500 PB3H T connector, mid-panel Connects 2 panels One panel connects to the other at mid-point 2800 PB4 4-way connector Connects 4 panels at a common intersection 1700 Panels CDN PB4H 4-way connector, mid-panel Connects 3 panels 2 panels connect at mid-point of the third 2800 PB5 2-low / -high connector Connects 3 panels where 2 are of equal height, 1 is higher 2900

64 Usage Model Description Price PB6 2-high / 1-low connector Connects 3 panels where 2 are of equal height and 1 is lower 2900 Panels CDN G P S & G P S I I PBW PDT PDT3 PDT7 PBVAL Wall mounting connector Connects panel to wall Panel to worksurface connector Panel to modesty panel connector Panel to gable connector Variable panel connector TRANSACTION TOP CONNECTORS IMPORTANT: Transaction Top Connectors are to be USED ONLY IF A TRANSACTION TOP IS APPLIED They replace hardware used to connect panels alone SB DB SB2 CB Single bracket Transaction Top connector To be used at end of panel 180 Transaction Top connector Connects 2 panels of equal height at Transaction Top connector, variable height Connects 2 panels of variable height at Transaction Top corner Connects 2 panels of equal height at M393H Mid-panel bracket 2500

65 Usage Model Description Price TRANSACTION TOP CONNECTORS IMPORTANT: Transaction Top Connectors are to be USED ONLY IF A TRANSACTION TOP IS APPLIED They replace hardware used to connect panels alone SB2L SB2R SB2LV Left 90 corner Connects Transaction Top to left side of corner Right 90 corner Connects Transaction Top to right side of corner Left variable height connector Connects Transaction Top to left side of corner *Add 1 extra to the Transaction Top to cover bracket G P S & G P S I I SB2RV Right variable height connector Connects Transaction Top to right side of corner *Add 1 extra to the Transaction Top to cover bracket WB 3-way Transaction Top connector Connects 3 Transaction Tops; 2 at 180, the other at SB3H Transaction Top mid-panel connector, 3-way intersection Connects Transaction Tops perpendicular to back panels WB 4-way Transaction Top connector Connects 4 Transaction Tops; each at SB4H Transaction Top mid-panel connector, 4-way intersection 7700 SBW Transaction Top wall mounting connector 8000 Panels CDN

66 Model Description Price OTHER CONNECTORS MLB90 90 L Bracket To attach island worksurfaces to adjoining end gable or to install shelves in hutches 1200 Panels CDN G P S & G P S I I M393 W391 SF SF-1 FM CH PBWC Flush plate To join worksurfaces of Transaction Tops of the same heights Z Bracket To join worksurfaces of different heights Pair of self-supporting feet Available in Black, Nevada, Business Grey and Chrome 1½ X 19 PLEASE SPECIFY Single self-supporting foot Available in Black, Nevada, Business Grey and Chrome 1½ X 19 PLEASE SPECIFY Floor Mount Available in Chrome Coat Hanger Available in Chrome 36 Wall Channel Available in Black, Nevada, Business Grey PLEASE SPECIFY