accessories the catalog

Transcription

1 accessories the accessories catalog

2 TMI NO. PAGE TMI NO. PAGE ACCESSORY COUNTERTOPS Laminated: Round: X Square: X COUNTERTOP SUPPORTS Laminated Panels: Angled: A1020, A1040, A Double Faced: A Single Faced: A Metal Supports: Support Bracket: A Support Leg: A Webbed Stiffener: A KNEESPACE CLOSURE Double Wide: A9616, A Single Wide: A Triple Wide: A MISCELLANEOUS Apron Rails: A1110, A Coat Hook Panels: Double Row: A1295, A1296, A1297 3, 4 Single Row: A1290, A Dispensing Trays: A2415, A MISCELLANEOUS (CONT D) Eraser Tray: A Fillers: FILLERB, FILLERW, FILLERT 12 Finished Back Panels: A1200, A1210 2, 3 Gate: X Geoshapes: Square: X Round: X Bullet: X Half Round: X Grommet: A2340, A2350, A Hanger (Captive): A Keyboard Tray: A2310, A2320 6, 7 Light Valance Panel: A Louver Vent: A Markerboard: A Pencil Drawer: A Shelves: A1400, A Brackets: A2030, A2050 5, 6 Expanded Metal: A Standards: A2000, A Soffit Panels: A1300, A Swing Door Insert: A Tackboard: A Toe Kick Panel: A Toe Kick Vent: A Tote Trays: A2400, A Wire Management: A INDEX

3 Single face countertop support panel with VGS laminate on both sides and PVC edging on exposed edges A1000 Double face countertop support panel with VGS laminate on both sides and PVC edging on exposed edges A1010 Countertop support panel with an angled front edge extending to the floor, VGS laminate on both sides and PVC edging on exposed edges A1020 A1040 Countertop support panel with VGS laminate on both sides, PVC edging on all exposed edges and a 3-1/2 wide mounting plate. The panel has a 6 high front edge and is cut back at 45 degrees. 21-3/8 21-3/8 A1050 Countertop support panel with VGS laminate on both sides, PVC edging on all exposed edges and a 3-1/2 wide mounting plate. The panel has a 4 high front edge and is cut back at 45 degrees. 21-3/8 21-3/8 ACCESSORIES 1

4 Removable kneespace closure panel with VGS laminate finish. A1100 Front apron rail with PVC edging on the bottom edge Min. A1110 Side apron rail with PVC edging on the front, back and bottom edges Min. A1120 Finishing toe kick panel with PVC edging on top edge. 6 For use with the A1210 back panel to close off kneespace toe kicks in island situations. A1150 Back panel with VGS laminate on one side, balanced with CLS laminate, and PVC edging on exposed edges. 119 Max. A1200 Kneespace in island situations can be closed off by using an A1150 toe kick panel. ACCESSORIES 2

5 Back panel with VGS laminate on both sides and PVC edging on exposed edges. 119 Max. Kneespace in island situations can be closed off by using an A1150 toe kick panel. A1210 A1290 Coat hook panel with a single row of cast satin aluminum double coat hooks spaced 6 apart. The panel is finished with VGS laminate and PVC edging on all four edges. 2 6 Coat hook panel with a single row of cast satin aluminum coat hooks spaced 6 apart. The panel is finished with VGS laminate and PVC edging on all four edges. 2 6 A1291 A1295 Coat hook panel with two rows of cast satin aluminum double coat hooks spaced 6 apart. The panel is finished with VGS laminate and PVC edging on all four edges. 2 6 Min. Coat hook panel with two rows of cast satin aluminum coat hooks spaced 6 apart. The panel is finished with VGS laminate and PVC edging on all four edges. 2 6 Min. A1296 ACCESSORIES 3

6 Coat hook panel with two rows of cast satin aluminum coat hooks spaced 6 apart. The panel is finished with VGS laminate and PVC edging on all four edges. 2 6 Min. A Swinging door insert with spring hinge. A Max. As Req d Soffit front closure panel with VGS laminate on front side, balanced with CLS laminate, and PVC edging on all exposed edges. A Max. As Req d Soffit side closure panel with VGS laminate on front side, balanced with CLS laminate. A Max. 2-1/2 Min. Field installed continuous light valance panel with VGS laminate on front side, balanced with CLS laminate and PVC edging on the bottom edge. A1360 ACCESSORIES 4

7 Shelf with VGS laminate on both sides and PVC edging on all four edges A1400 Folding shelf assembly with two spring loaded brackets. Shelving brackets are load rated at 88 pounds per pair. 2 A1571 Shelving standard for use with A2030 brackets and A1400 shelving. 5/8 1/ A2000 Minimum of 1 required for every of shelving. Heavy duty shelving standard for use with A2050 brackets and A1400 shelving. 7/ A2020 Minimum of 1 required for every of shelving. Shelving bracket for use with A2000 standards and A1400 shelving A2030 ACCESSORIES 5 Minimum of 1 required for every of shelving.

8 Heavy duty shelving bracket for use with A2020 standards and A1400 shelving A2050 Minimum of 1 required for every of shelving. 17 Captive clothing hanger. A /8 Plastic chrome louver. A2210 Magnetic eraser tray. A2250 Articulating keyboard tray with pull-out mouse pad. A2310 Keyboard and mouse not included. ACCESSORIES 6

9 22 3-1/2 Keyboard drawer. Mounts under countertop or on top of countertop. A2320 Keyboard not included. 2 3 Molded pencil drawer. A /8 3-5/8 Round grommet with 2-7/8 opening. A /2 Oval grommet. A /2 17-1/2 2-1/4 Paper slot grommet A2360 ACCESSORIES 7

10 10 3-1/2 19 Tote tray. A /2 19 Tote tray. A /4 2-7/8 9-1/2 Small dispensing tray with one removable plastic divider. A /4 2-7/8 20-1/8 Large dispensing tray with two removable plastic dividers. A2416 Tackboard available as vinyl covered gray or beige, fabric covered white, gray or beige, or in a natural colored cork plate. A2860 ACCESSORIES 8

11 Markerboard with eraser tray, available in white, gray and beige. A Metal countertop support leg with mounting plate. A7410 Metal countertop support bracket with cutouts at the top to accommodate cleats and wire management. 3 As As Req d Req d A7453 TMI recommends 1 support bracket for every of countertop. Max. 4 Metal webbed stiffener for additional support at countertops or shelving. A7620 Expanded metal shelf with a x x 10 gauge angle iron frame and 16 gauge expanded metal panel with 1/2 openings. 13-1/8 Min A8600 ACCESSORIES 9

12 As Req d 3- Metal louvered toe kick plate. A /2 1-1/4 Plastic wire management trough. A8840 A9616 Removable kneespace closure panels with a fixed 6 wide center panel for support bracket placement, and fixed toe base panels. All panels are finished with VGS laminate surface Removable kneespace closure panels two fixed 6 wide panels for support bracket placement, and fixed toe base panels. All panels are finished with VGS laminate surface A9617 Two A7453 support brackets are included. Removable kneespace closure panels a fixed 6 wide center panel for support bracket placement, and fixed toe base panels. All panels are finished with VGS laminate surface A9619 One A7453 support brackets is included. ACCESSORIES 10

13 Square table top with solid particleboard core, finished with HGS laminate on the exposed face, balanced with CLS laminate, and 3mm PVC edging on all four edges X2000 Round table top with solid particleboard core, finished with HGS laminate on the exposed face, balanced with CLS laminate, and 3mm PVC edging X2100 Square geoshape with 3 radiused corners and a 2-1/2 high finished black base with leveling glides All surfaces finished with VGS laminate. X4000 Round geoshape with a 2-1/2 high finished black base and leveling glides All surfaces finished with VGS laminate. X4100 Bullet geoshape with a 2-1/2 high finished black base and leveling glides. All surfaces finished with VGS laminate. X4200 ACCESSORIES 11

14 Two half round geoshapes with 2-1/2 high finished black bases and leveling glides All surfaces finished with VGS laminate. X4300 Double acting swing gate with mounting hardware. 1-1/4 All surfaces finished with VGS laminate. X7000 Miscellaneous closure panel used to finish base cabinet installations FILLERB Panels are field cut to meet conditions and installed. Miscellaneous closure panel used to finish tall cabinet installations FILLERT Panels are field cut to meet conditions and installed. Miscellaneous closure panel used to finish wall cabinet installations FILLERW Panels are field cut to meet conditions and installed. ACCESSORIES 12