BSI. Flexstation Desking. Pricelist June Furniture line for today s ergonomic driven offices

Transcription

1 Flexstation Desking Pricelist June 2015 Furniture line for today s ergonomic driven offices Feature-packed office furniture providing efficiency at you fingertips. Great design opportunities at affordable prices. Introducing the Streamline Leg BSI

2

3 FLEXSTATION Contents Page No. FlexStation General Information 2 Basic Worksurfaces 4 Mobile Surfaces 16 Transitional Surfaces 18 Components General Information 28 Overhead Storage 30 Privacy Screens 44 Accessories General Information 46 Tool Rail 48 Guest Modesty Panel 48 Full Leg End Panel 48 FlexStation with PowerUp General Information 50 Parts Level One 52 Parts Level Two 53 Parts Level Three 54 Parts Level Four 55 Parts Level Five 56 Basic Worksurface (Levels One, Three, Five) 58 Basic Worksurface (Levels Two, Four) 62 Electrical 66 1

4 General Information FLEXSTATION Basic Worksurfaces WBW p. 4 Adjustable Keyboard Pad Worksurfaces WAK p. 6 Transitional Worksurfaces WCT p. 20 Features Solid core top Plastic laminate surface Flat vinyl T-edge Seam-welded tubular steel frame Chrome plated glides Enamel legs PVC edge Transitional Leg Transitional leg bases are 6 inches shorter than standard leg bases for greater leg room and chair clearance when two surfaces are joined. When seated at the worksurface, right or left refers to the individual worksurface, not the assembled workstation. Cannot be ordered for an individual, free-standing worksurface. SPECIFICATIONS Worksurface Frames Heavy-gauge seam-welded enamel finished tubular steel. Horizontal table top support tube, 16-ga., 1" x 2" steel. Floor support member, 16- ga., 1" x 2" steel tube. Top floor support tubes are welded with (2) 16-ga., 1" x 2" vertical leg members. 19-ga. steel modesty panel. Leg interior provides concealed management of wire from floor to worksurface. Adjustable chromeplated glides. Worksurface Top 11 4" thick consisting of high-density particleboard,.050" high-pressure plastic laminate top surface with.045" phenolic backing sheet. Available with flat-vinyl T-edge and PVC edge. Transitional Surface Splice Plates Die-formed steel splice plates attach to underside of units with screws. Splice plates are provided with Transitional Surfaces only. Standard connector plate provided when surfaces are of common height. Step connector plate provided for connecting 29" to 27" surfaces. Basic and keyboard worksurfaces are not provided with splice plates. Adjustable Keyboard Pad Worksurface Die-formed L-brackets attach to table and keyboard pad with screws. Threaded hand knobs lock keyboard pad in position. Available with flat vinyl T-edge only. Wire Management 3" x 2" openings with protected edges are provided for all worksurfaces. On basic adjustable keyboard worksurfaces and rectangular transitional surfaces, the grommets are located at the top of the modesty panels on both sides. On the end-of-run square, corner and peninsula transitionals, the grommet is located in the top center. The triangular transitional does not have a grommet. Weight Capacity All FlexStation tables exceed ANSI/BIFMA 5.5 Standards. All FlexStation tables have been tested to withstand a weight of 10 pounds per lineal inch of worksurface evenly distributed along the entire length of the worksurface. Wireway Option Wireway trough connects to existing openings at top of modesty panels and is constructed of 19 gauge steel with 1" deep by 11 2" high opening for cables. Grommets Trim color selection includes grommets. All colors are monochromatic except CF, CM, EX, MZ, and SX. For the exceptions, the plastic components for CF and CM paint are LG, EX paint receives BL plastic, MZ paint receives SA plastic and SX paint receives WG plastic. Standard Grommet Workstations 42 and below will come standard with a center grommet. Workstations 48 and above will come with both left and right grommets. INFORMATION Warranty See Terms and Conditions for general information. Structural Integrity years High wear parts such as fabrics, other coverings material/finishes, glides, slides and user adjustable work surface mechanisms year Electrical Products years 2

5 FLEXSTATION General Information If you need help with designing your Flexstation office layout, please contact a BSI sales representative. But, if you re ready to order, please All Flexstation products, except power-up, are available to be purchased Online. 3

6 Worksurfaces FLEXSTATION MODEL NUMBER Edge Mod/ MODEL D x W Worksurface Style Hgt WWay Beam Tr Legs Trim Laminate Edge Color Basic Worksurface 11 4"solid core top with high-pressure laminate surface Flat vinyl T-edge, PVC edge Powder-coated finish on legs Each leg is a welded unit joined by a modesty panel. Leg cavity provides concealed management of wire from floor to worksurface. Legs are located 11 2" from worksurface edge. Heavy-gauge seam-welded tubular steel frame 3" x 2" wire management port provided for all tables on both sides, at top of modesty panels Scuff plates Adjustable chrome-plated glides Wireway option connects to existing openings at top of modesty panels with metal channel for wire management Optional transitional legs (6" shortened leg base) Modesty panel is 15" high on 27" and 171 2" on 29" tables and is located 11 2" from backside of worksurface. Standard Grommet 24x30" WBW x36" WBW x42" WBW x48" WBW x54" WBW x60" WBW x66" WBW x72" WBW x30" WBW x36" WBW x42" WBW x48" WBW x54" WBW x60" WBW x66" WBW x72" WBW3072 A B C D E F G H I HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of worksurface. Select edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN Select height. 7 = 27" 9 = 29" Add $20 3L Indicate wireway option. NW = No Wireway W1 = 30 WireWay W2 = 36 WireWay W3 = 42 WireWay W4 = 48 WireWay W5 = 54 WireWay E W6 = 60 WireWay W7 = 66 WireWay W8 = 72 WireWay Indicate modesty panel or beam* B = Beam M = Modesty Panel F = Full Modesy Add $70 F Indicate location and type of leg.* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left (left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *NOTE: If ordering Basic Worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available G Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color H Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. I Select edge color. CF = Cafe Au Lait 4

7 FLEXSTATION Worksurfaces LIST PRICES Total Weight Standard Laminate BN/3L with Wireway BN/3L without Wireway 69# $468 (W1) $445 76# 486 (W2) # 501(W3) # 524 (W4) # 602 (W5) # 620 (W6) # 661 (W7) # 674 (W8) # 489 (W1) # 517 (W2) # 533 (W3) # 556 (W4) # 623 (W5) # 640 (W6) # 682 (W7) # 719 (W8) 670 FN HM CO MM BM BW WY CC CT PV FM SF CP = Flannel = Hardrock Maple = Castle Oak = Monticello Maple = Biltmore Cherry = Brighton Walnut = Windsor Mahogany = Cocobala = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std ACCESSORIES Casters 4 swivel casters (21 2" diameter), 2 with locks. Add 2" to top surface height. Add 2# to weight. Order separately, specify List Price $40.00/set Worksurface Connectors For attaching two freestanding tables together of different heights. Black finish. Specify WZ.BL. List Price $16.00 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 5

8 Worksurfaces FLEXSTATION MODEL NUMBER Edge Mod/ Edge MODEL D X W Worksurface Style Pad Hgt WWay Beam Tr Legs Trim Laminate Color Adjustable Keyboard Pad Worksurface 11 4"solid core top with high-pressure laminate surface Adjustable keyboard pad right, centered (shown) or left 10" x 24"; 3" height adjustments; 1" forward extension adjustment; 15 maximum downward tilt Flat vinyl T-edge or PVC edge Powder-coated finish on legs Each leg is a welded unit joined by a modesty panel. Leg cavity provides concealed management of wire from floor to worksurface. Legs are located 11 2" from worksurface edge Heavy-gauge seam-welded tubular steel frame 3" x 2" wire management port provided for all tables on both sides, at top of modesty panels Scuff plates Adjustable chrome-plated glides Wireway option connects to existing openings at top of modesty panels with metal channel for wire management Optional transitional legs (6" shortened leg base) When adding a pedestal, pad must be RH or LH and worksurface must be at least 60" long Modesty panel is 15" high on 27" and 171 2" on 29", and is located 11 2" from backside of worksurface Keyboard is located 53 4" from edge of worksurface on left and right locations. 24x30 WAK2430 C 9 24x36" WAK2436 C 9 24x42" WAK2442 C 9 24x48" WAK x54" WAK x60" WAK x66" WAK x72" WAK x30 WAK3030 C 9 30x36" WAK3036 C 9 30x42" WAK3042 C 9 30x48" WAK x54" WAK x60" WAK x66" WAK x72" WAK A B C D E F G H I J HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of worksurface. Select edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN Location of keypad. C = Center R = Right L = Left Select height. 7 = 27" 9 = 29" Add $20 3L E F G Indicate Beam or Modesty Panel B = Beam M = Modesty Panel F = Full Modesty Add $70 Indicate wireway option. NW = No Wireway W1 = 30 WireWay W2 = 36 WireWay W3 = 42 WireWay W4 = 48 WireWay W5 = 54 WireWay W6 = 60 WireWay W7 = 66 WireWay W8 = 72 WireWay Indicate location and type of leg.* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left (left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *NOTE: If ordering Basic Worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available H Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color I Select laminate surface. SP =Standard Laminate CP =Customer Specified Laminate NOTE: Laminate swatches are available online and by 6

9 FLEXSTATION Worksurfaces PRICE LISTS Total Weight Standard Laminate BN/3L with Wireway BN/3L without Wireway 70# $641 (W1) $618 77# 659 (W2) # 674 (W3) # 697 (W4) # 775 (W5) # 793 (W6) # 83 (W7) # 847 (W8) # 662 (W1) # 690 (W2) # 706 (W3) # 729 (W4) # 796 (W5) # 813 (W6) # 855 (W7) # 892 (W8) 843 request. ACCESSORIES SPECIAL SERVICES J Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple BM = Biltmore Cherry BW = Brighton Walnut WY = Windsor Mahogany CC = Cocobala CT = Chocolate Pear Tree PV = Provincial FM = Fusion Maple SF = Summer Flame CP = Other Std Casters 4 swivel casters (21 2" diameter), 2 with locks. Add 2" to top surface height. Add 2# to weight. Order separately, specify List Price $40.00/set Worksurface Connectors For attaching two freestanding tables together of different heights. Black finish. Specify WZ.BL. List Price $16.00 List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 7

10 Worksurfaces FLEXSTATION MODEL NUMBER Edge Mod/ Edge MODEL D x W Worksurface Style Hgt WWay Beam Tr Legs Trim Laminate Color Stand-up Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge, PVC edge Powder-coated finish on legs. Legs are located 11 2" from worksurface edge Available in 42" height only Only connects to 30" wide work surface Modesty panel is 171 2" high and is located 11 2" from backside of worksurface Wireway option connects to existing openings at top of modesty panels with metal channel for wire management Stand-Up Worksurface available in 42" height only Full Modesty Option not Available 30x36" WSU S Stand Alone Corner Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge, PVC edge Powder-coated finish on legs. Legs located 11 2" from worksurface edge Adjustable glides Available in 27" or 29" heights Modesty panel is 15" high on 27" and 171 2" on 29" tables and is located 11 2" from backside of worksurface Corner support leg is 7 8" sq. tubular steel Front edge dimension is 17" on 24x36" and 30x42"; 251 2" on 24x42" and 30x48"; 34" on 24x48" Wireway option connects to existing openings at top of modesty panels with metal channel for wire management Stand Alone Corner Curvilinear Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge or PVC edge Front edge is curved Powder-coated finish on legs. Legs 11 2" from worksurface edge Adjustable glides Available in 27" or 29" heights Modesty panel is 15" high on 27" and 171 2" on 29" tables and is located 11 2" from backside of worksurface Corner support leg is 7 8" sq. tubular steel Front edge dimension is 17" on 24x36" and 30x42"; 251 2" on 24x42" and 30x48"; 34" on 24x48" Wireway option connects to existing openings at top of modesty panels with metal channel for wire management Left Right D x W x W x D 24x36" x 36x24" WCS x42" x 42x24" WCS x48 x 48x24 WCS x42 x 42x30 WCS x48" x 48x30" WCS x36" x 36x24" WCC x42" x 42x24" WCC x48" x 48x24" WCC x42" x 42x30" WCC x48" x 48x30" WCC A B C D E F G H I HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of worksurface. Select edge style BN = Flat Vinyl T-edge 3L = PVC edge BN Select height. 2 = 42" 7 = 27" 9 = 29" Add $20 3L Indicate wireway option. NW = No Wireway W2 = 36 WireWay W3 = 42 WireWay W4 = 48 WireWay E F Indicate Beam or Modesty Panel B = Beam M = Modesty Panel F = Full Modesty Add $70/$140 (Corners) Indicate location and type of leg.* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left (left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *NOTE: If ordering Basic Worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available G Select trim color for edge and painted surface. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color H Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. I Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple 8

11 FLEXSTATION Worksurfaces LIST PRICES Total Weight Standard Laminate 27" 29" 42" BN/3L with Wireway BN/3L without Wireway 94# $517 (W2) $490 73# 76# 741 (W2) # 96# 769 (W3) # 118# 815 (W4) # 96# 769 (W3) # 118# 815 (W4) # 76# 778 (W2) # 96# 810 (W3) # 106# 861 (W4) # 108# 810 (W3) # 118# 861 (W4) 780 BM BW WY CC CT PV FM SF CP = Biltmore Cherry = Brighton Walnut = Windsor Mahogany = Cocobala = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std ACCESSORIES Casters 4 swivel casters (21 2" diameter), 2 with locks. Add 2" to top surface height. Add 2# to weight. Order separately, specify List Price $40.00/set Worksurface Connectors For attaching two freestanding tables together of different heights. Black finish. Specify WZ.BL. List Price $

12 Worksurfaces FLEXSTATION MODEL NUMBER Left Right Edge Mod/ Edge MODEL D x W x D Worksurface Style Hgt WWay Beam Tr LegsTrim Laminate Color Curvilinear Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge or PVC edge Joins 24" width worksurface to 30" width worksurface Powder-coated finish on legs. Legs are located 11 2" from worksurface edge Adjustable glides Available in27" or 29" heights Modesty panel is 15" high on 27" and 171 2" high on 29" tables and is located 11 2" from backside of worksurface Wireway option connects to existing openings at top of modesty panels with metal channel for wire management 24 x 42 x30" WRC x 48 x30" WRC x 54 x30" WRC x 60 x30" WRC x 66 x30" WRC x 72 x30" WRC x 42 x24" WRC x 48 x24" WRC x 54 x24" WRC x 60 x24" WRC x 66 x24" WRC x 72 x24" WRC Stand Alone Corner Reduction Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge or PVC edge Joins 24" width worksurface to 30" width worksurface Powder-coated finish on legs. Legs are located 11 2" from worksurface edge Adjustable glides Available in 27" or 29" heights Modesty panel is 15" high on 27" and 171 2" on 29" tables and is located 11 2" from backside of worksurface Corner support leg is 7 8" sq. tubular steel Wireway option connects to existing openings at top of modesty panels with metal channel for wire management Left Right D x W x W x D 24x42" x 42x30" WCR x48" x 48x30" WCR x42" x 42x24" WCR x48" x 48x24" WCR Stand Alone Corner Curvilinear Reduction Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge or PVC edge Front edge is curved Powder-coated finish on legs. Legs are located 11 2" from worksurface edge Adjustable glides Available in 27" or 29" heights Modesty panel is 15" high on 27" and 171 2" on 29" tables and is located 11 2" from backside of worksurface Corner support leg is 7 8" sq. tubular steel Wireway option connects to existing openings at top of modesty panels with metal channel for wire management 24x42" x 42x30" WCCS x48" x 48x30" WCCS x42" x 42x24" WCCS x48" x 48x24" WCCS A B C D E F G H I HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of worksurface. Select edge style BN = Flat Vinyl T-edge 3L = PVC edge BN Select height. 7 = 27" 9 = 29" Add $20 3L Indicate wireway option. NW = No Wireway W1 = 30 WireWay W2 = 36 WireWay W3 = 42 WireWay W4 = 48 WireWay E W5 = 54 WireWay W6 = 60 WireWay W7 = 66 WireWay W8 = 72 WireWay Indicate beam or modesty panel. B = Beam M = Modesty Panel F = Full Modesty Add $70/$140 (Corners) F Indicate location and type of leg.* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left (left transitional leg) Add $6 B = Both (Both transitional legs) Add $12 *NOTE: If ordering Basic Worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available G Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color H Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. I Select edge color. 10

13 FLEXSTATION Worksurfaces Total Weight LIST PRICES Standard Laminate BN/3L with Wireway BN/3L without Wireway 84# $593 (W3) $564 91# 616 (W4) # 683 (W5) # 700 (W6) # 742 (W7) # 779 (W8) # 593 (W3) # 616 (W4) # 683 (W5) # 700 (W6) # 741 (W7) # 779 (W8) # 748 (W3) 102# 782 (W4) 96# 748 (W3) 102# 782 (W4) 96# 808 (W3) 102# 842 (W4) 96# 808 (W3) 102# 842 (W4) CF FN HM CO MM BM BW WY CC CT PV FM SF CP = Cafe Au Lait = Flannel = Hardrock Maple = Castle Oak = Monticello Maple = Biltmore Cherry = Brighton Walnut = Windsor Mahogany = Cocobala = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std ACCESSORIES Casters 4 swivel casters (21 2" diameter), 2 with locks. Add 2" to top surface height. Add 2# to weight. Order separately, specify List Price $40.00/set Worksurface Connectors For attaching two freestanding tables together of different heights. Black finish. Specify WZ.BL. List Price $16.00 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8% s quick and easy. 11

14 Worksurfaces FLEXSTATION (Right shown) (Right shown) MODEL NUMBER Edge Mod/ Trans. MODEL D x W x L Worksurface Style Direction Hgt WWay Beam Leg Trim Laminate Edge Color P Shaped Peninsula Worksurface 11 4" solid particleboard with.050" laminate Flat vinyl T-edge or PVC edge Include two worksurface grommets Concealed vertical wire management Include modesty panel with 3" x 2" wire management port at top of modesty panel on 48" side Modesty panel is 171 2" on 29" tables and is located 11 2" from backside of worksurface Heavy-gauge seam-welded tubular steel frame Scuff plates Wireway option connects to existing openings at top of modesty panel with metal channel for wire management on 48" side Long surface is supported by 3" diameter metal support leg with adjustable glide Powder-coated finish on legs Connects to either 24" or 30" worksurface Adjustable chrome plated glides Optional transitional legs (6" shortened leg base) Available with 29" height only Round End is always 30 Piano Peninsula Worksurface 11 4" solid particleboard with.050" laminate Flat vinyl T-edge or PVC edge Include two worksurface grommets Concealed vertical wire management Include modesty panel with 3" x 2" wire management port at top of modesty panel on 48" side Modesty panel is 171 2" on 29" tables and is located 11 2" from backside of worksurface Heavy-gauge seam-welded tubular steel frame Scuff plates Wireway option connects to existing openings at top of modesty panel with metal channel for wire management on 48" side Long surface is supported by 3" diameter metal support leg with adjustable glide Powder-coated finish on legs Connects to either 24" or 30" worksurface Adjustable chrome plated glides Optional transitional legs (6" shortened leg base) Available with 29" height only Round End is always 30 24x48x60" WZPT x48x66" WZPT x48x72" WZPT x48x84 WZPT x48x66" WZPT x48x72" WZPT x48x84 WZPT x48x60" WZPP x48x66" WZPP x48x72" WZPP x48x84 WZPP x48x66" WZPP x48x72" WZPP x48x84 WZPP A B C D E F G H I J HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of - indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of worksurface. Specify edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN 3L Specify surface direction. L = Left R = Right *Direction is determined by the side of the worksurface that the 3" diameter leg is on. Select height. 9 = 29" E F Indicate wireway option. NW = No Wireway W4 = 48 WireWay Indicate beam or modesty panel B = Beam M = Modesty Panel F = Full Modesty Add $70 G Indicate location and type of leg. S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left (left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *NOTE: If ordering Basic Worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available H Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color I Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. J Select edge color. CF = Cafe Au Lait FN = Flannel 12

15 FLEXSTATION Worksurfaces LIST PRICES Standard Laminate Total Weight BN/3L with Wireway BN/3L without Wireway 134# $939 $ # # # # # # # # # HM CO MM BM BW WY CC CT PV FM SF CP = Hardrock Maple = Castle Oak = Monticello Maple = Biltmore Cherry = Brighton Walnut = Windsor Mahogany = Cocobala = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 13

16 Worksurfaces FLEXSTATION MODEL NUMBER Edge Mod/ Trans. MODEL D x W x L Worksurface Style Direction Hgt WWay Beam Leg Trim Laminate Edge Color (Right shown) Square Shoe Worksurface 11 4" solid particleboard with.050" laminate Flat vinyl T-edge or PVC edge Include two worksurface grommets Concealed vertical wire management Include modesty panel with 3" x 2" wire management port at top of modesty panel on 48" side Modesty panel 171 2" on 29" tables and is located 11 2" from backside of worksurface Heavy-gauge seam-welded tubular steel frame Scuff plates Wireway option connects to existing openings at top of modesty panel with metal channel for wire management on 48" side Long surface is supported by 3" diameter metal support leg with adjustable glide Powder-coated finish on legs Connects to either 24" or 30" worksurface Adjustable chrome plated glides Optional transitional legs (6" shortened leg base) Available with 29" height only Conference End Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge and PVC edge, self edge Enamel finish on leg 36" connects to 24" deep worksurface 42" connects to 30" deep worksurface 3" diameter metal support leg with adjustable chrome plated glide Include splice plate Wireway option not available Available with 29" height only 24x48x60" WZSS x48x66" WZSS x48x72" WZSS x48x84" WZSS x48x66" WZSS x48x72" WZSS x48x84" WZSS " WCE " WCE42 9 A B C D E F G H I J HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of worksurface. Specify edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN 3L Specify surface direction. L = Left R = Right *Direction is determined by the side of the worksurface that the 3" diameter leg is on. Select height. 9 = 29" E F G Indicate wireway option. NW = No Wireway W4 = 48 Wireway Indicate beam or modesty panel. B = Beam M = Modesty Panel F = Full Modesty Indicate location and type of leg. S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left (left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *NOTE: If ordering Basic Worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available H Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color I Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. J Select edge color. 14

17 FLEXSTATION Worksurfaces LIST PRICES Standard Laminate Total Weight BN/3L with Wireway BN/3L without Wireway 133# $939 $ # # # # # # # # 416 CF FN HM CO MM BM BW WY CC CT PV FM SF CP = Cafe Au Lait = Flannel = Hardrock Maple = Castle Oak = Monticello Maple = Biltmore Cherry = Brighton Walnut = Windsor Mahogany = Cocobala = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 15

18 Worksurfaces FLEXSTATION MODEL NUMBER Edge Glides/ MODEL D x Dia. Worksurface Style Hgt Trim Casters Laminate Edge Color WMT Mobile Teardrop Worksurface 1 1 4" solid particleboard with.050" laminate Flat vinyl T-edge or PVC edge Base consists of three 3" diameter metal support leg with adjustable chrome-plated glide Powder-coated finish on legs 3" casters are optional; two are locking Connects to end of 24" or 30" worksurface Wireway option not available 29" height only with or without casters 24x40" dia WMT x50" dia WMT Pointed end is removed to accommodate corner of two panels 24x45" dia for panel WMTP x55" dia for panel WMTP WMTP WMSC Mobile Semi-Circle Worksurface 1 1 4" solid particleboard with.050" laminate Flat vinyl T-edge or PVC edge Base consists of three 3" diameter metal support leg with adjustable chrome-plated glide Powder-coated finish on legs Connects to end of 24" or 30" worksurface Notched in center for wire management Wireway option not available 29" height only with or without casters 3" casters are optional; two are locking 24x48" WMSC x60" WMSC60 9 Notch enables surface to wrap around end cap on workstation privacy screens or panel systems " diameter accommodates two 24" deep worksurfaces separated by a System XXI panel " diameter accommodates two 30" deep worksurfaces separated by a System XXI panel 24x501 2" for panel WMSCP x621 2" for panel WMSCP63 9 A B C D E F G WMSCP HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C Select size of worksurface. Specify edge style. BN = Flat vinyl T-edge 3L = PVC edge BN Select height. 9 = 29" 3L D E Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color Select glides or casters. G = Glides C = Casters F Select laminate surface. SP = Standard Laminate CP =Customer Specified Laminate NOTE: Laminate swatches are available online and by request. G Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple BM = Biltmore Cherry BW = Brighton Walnut WY = Windsor Mahogany CC = Cocobala CT = Chocolate Pear Tree PV = Provincial FM = Fusion Maple SF = Summer Flame CP = Other Std 16

19 FLEXSTATION Worksurfaces LIST PRICES Standard Laminate Total Weight BN/3L with Glides BN/3L with Casters 70# $692 $ # # # # # # # SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 17

20 Worksurfaces FLEXSTATION MODEL NUMBER Edge Mod/ Edge MODEL D x W Worksurface Style Hgt WWay Beam Trim Laminate Color Peninsula End Worksurface Solid core top with high pressure laminate surface Flat vinyl T-edge or PVC edge Enamel finish on 3" diameter metal support leg Wireway option not available Available with 29" height only 24x48" WPW NW 24x60" WPW NW 24x72" WPW NW 30x48" WPW NW 30x60" WPW NW 30x72" WPW NW Peninsula Side Mount Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge or PVC edge Enamel finish on 3" diameter metal support leg Include modesty panel located 11 2" from worksurface edge When specifying a peninsula side mount worksurface, a transitional leg must be ordered on the basic surface to which it will connect Wireway option not available Available with 29" height only 24x48" WPWS NW 24x60" WPWS NW 24x72" WPWS NW 30x48" WPWS NW 30x60" WPWS NW 30x72" WPWS NW Peninsula Center Mount Worksurface Solid core top with high-pressure laminate surface Flat vinyl T-edge or PVC edge Enamel finish on 3" diameter metal support leg Include modesty panel located 11 2" from worksurface edge Wireway option not available Available with 29" height only 24x48" WPWC NW 24x60" WPWC NW 24x72" WPWC NW 30x48" WPWC NW 30x60" WPWC NW 30x72" WPWC NW A B C D E F G H HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D E Select size of transitional worksurface. Specify edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN Select height. 9 = 29" 3L Indicate wireway option. NW = No Wireway Indicate beam or modesty panel.. B = Beam M = Modesty Panel F G Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. H Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple BM = Biltmore Cherry BW = Brighton Walnut WY = Windsor Mahogany CC = Cocobala CT = Chocolate Pear Tree PV = Provincial FM = Fusion Maple SF = Summer Flame CP = Other Std 18

21 FLEXSTATION Worksurfaces LIST PRICES Total Weight Standard Laminate 29" BN/3L 44# $313 57# # # # # # # # # # # # # # # # # 557 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 19

22 Worksurfaces FLEXSTATION MODEL NUMBER Left Right Edge Trans. Edge MODEL D x D Worksurface Style Direction Height WWay Trim Laminate Color Square Transitional Surface Two splice plates provided Full wrap modesty panel included For use with fixed height workstations only Available with Flat vinyl T-edge or PVC edge Corner support leg is 7 8" square tubular steel Wireway option connects to existing openings at top of modesty panel with metal channel 24x24" WST x30" WST3030 Rectangle Transitional Surface Two splice plates provided Full wrap modesty panel included For use with fixed height workstations only Available with flat vinyl T-edge or PVC edge Corner support leg is 7 8" square tubular steel Wireway option connects to existing openings at top of modesty panel with metal channel 30x24" WRT x30" WRT2430 A B C D E F G H All square and rectangular transitional surfaces connected at the same height do not require Right (R) or (L) transition direction. Use X for transition direction. Transitional direction required for 97 transitional height. HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C Select size of transitional worksurface. Select edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN 3L Select transition height direction.* L = Left R = Right X = None *Transition direction is determined from the originating 24" or 30" basic or keyboard pad worksurface. D E F Select transition height. 99 = 29" to 29" 97 = 29" to 27" Add $20 77 = 27" to 27" Indicate wireway option. NW = No Wireway WW = Wireway Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color G Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. H Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple BM = Biltmore Cherry BW = Brighton Walnut WY = Windsor Mahogany CC = Cocobala CT = Chocolate Pear Tree PV = Provincial 20

23 FLEXSTATION Worksurfaces LIST PRICES Standard Laminate Total Weight BN/3L with Wireway BN/3L without Wireway Joins table 34# $312 $289 24" deep worksurface to 24" deep worksurface 51# " deep worksurface to 30" deep worksurface 38# " deep worksurface to 24" deep worksurface 38# " deep worksurface to 30" deep worksurface FM SF CP = Fusion Maple = Summer Flame = Other Std SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 21

24 Worksurfaces FLEXSTATION MODEL NUMBER Left Right Edge Trans. Transition Mod/ Edge MODEL D x W x W x D Worksurface Style Direction Height WWay Beam Trim Laminate Color Corner Transitional Surface Available with Flat vinyl T-edge, PVC edge Full wrap modesty panel included For use with fixed height workstations only Front edge dimension is 17" on 24x36" and 30x42"; 251 2" on 24x42" and 30x48"; 34" on 24x48" Optional wireway 24x36" x 36x24" WCT x42" x 42x24" WCT x48" x 48x24" WCT x42" x 42x30" WCT x48" x 48x30" WCT3048 Corner Transitional Surface with Keyboard Pad Available with flat vinyl T-edge or PVC vinyl edge Keyboard pad: 10 x 24"; 3" height adjustments; 1" forward extension adjustment; 15 maximum downward tilt Full wrap modesty panel included For use with fixed height workstations only Optional wireway 24x36 x 36x24 WCTK x42" x 42x24" WCTK x48" x 48x24" WCTK x42 x 42x30 WCTK x48" x 48x30" WCTK3048 Corner Transitional Reduction Surface Available with flat vinyl T-edge or PVC vinyl edge Full wrap modesty panel included For use with fixed height workstations only Used to join 24" and 30" worksurfaces in corner Optional wireway Corner Curvilinear Transitional Surface Available with flat vinyl T-edge or PVC vinyl edge Full wrap modesty panel included For use with fixed height workstations only Curved front surface Optional wireway Corner Curvilinear Transitional Reduction Surface Available with flat vinyl T-edge or PVC vinyl edge Full wrap modesty panel included For use with fixed height workstations only Used to join 24" and 30" worksurfaces in corner Curved front surface Optional wireway 24x36 x 36x30 WCTR x42" x 42x30" WCTR x48" x 48x30" WCTR x42" x 42x24" WCTR x48" x 48x24" WCTR x36" x 36x24" WCCT x42" x 42x24" WCCT x48" x 48x24" WCCT x42" x 42x30" WCCT x48" x 48x30" WCCT x36 x 36x30 WCCTR x42" x 42x30" WCCTR x48" x 48x30" WCCTR x42" x 42x24" WCCTR x48" x 48x24" WCCTR A B C D E F G H I All corner transitional surfaces connected at the same height do not require right (R) or left (L) transition direction. Use X for transition direction. Transition direction required for 97 transitional. HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C Select size of transitional worksurface. Select edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN 3L Select transition height direction.* L = Left R = Right X = None *Transition direction is determined from the originating 24" or 30" basic or keyboard pad worksurface. D E F G Select transition height. 99 = 29" to 29" 97 = 29" to 27" Add $20 77 = 27" to 27" Indicate wireway option. NW = No Wireway W2 = 36 WireWay W3 = 42 WireWay W4 = 48 WireWay Indicate beam or modesty panel. B = Beam M = Modesty Panel F = Full Modesty Add $70 Select trim color for painted surfaces. H CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. I Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple 22

25 FLEXSTATION Worksurfaces LIST PRiCES Standard Laminate Total Weight BN/3L with Wireway BN/3L without Wireway Joins table 72# $522 (W2) $457 24" deep worksurface to 24" deep worksurface 80# 535 (W3) " deep worksurface to 24" deep worksurface 96# 599 (W4) " deep worksurface to 24" deep worksurface 98# 553 (W3) " deep worksurface to 30" deep worksurface 102# 599 (W4) " deep worksurface to 30" deep worksurface 80# 695 (W2) " deep worksurface to 24" deep worksurface 91# 726 (W3) " deep worksurface to 24" deep worksurface 102# 772 (W4) " deep worksurface to 24" deep worksurface 726 (W3) " deep worksurface to 30" deep worksurface 772 (W4) " deep worksurface to 30" deep worksurface 96# 582 (W2) " deep worksurface to 30" deep worksurface 102# 613 (W3) " deep worksurface to 30" deep worksurface 96# 659 (W4) " deep worksurface to 30" deep worksurface 102# 613 (W3) " deep worksurface to 24" deep worksurface 659 (W4) " deep worksurface to 24" deep worksurface 72# 522 (W2) " deep worksurface to 24" deep worksurface 80# 553 (W3) " deep worksurface to 24" deep worksurface 102# 599 (W4) " deep worksurface to 24" deep worksurface 90# 553 (W3) " deep worksurface to 30" deep worksurface 102# 599 (W4) " deep worksurface to 30" deep worksurface8 619 (W2) " deep worksurface to 30" deep worksurface 96# 663 (W3) " deep worksurface to 30" deep worksurface 102# 707 (W4) " deep worksurface to 30" deep worksurface 96# 663 (W3) " deep worksurface to 24" deep worksurface 102# 707 (W4) " deep worksurface to 24" deep worksurface CO MM BM BW WY CC CT PV FM SF CP = Castle Oak = Monticello Maple = Biltmore Cherry = Brighton Walnut = Windsor Mahogany = Cocobala = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 23

26 Worksurfaces FLEXSTATION MODEL NUMBER Edge Trans. Transition Edge MODEL D x D Worksurface Style Direction Height WWay Trim Laminate Color Triangle Transitional Surface Two splice plates provided Full wrap modesty panel included For use with fixed height workstations only Available with flat vinyl T-edge or PVC edge Wireway option connects to existing openings at top of modesty panel with metal channel 24x24x34" 30x30x42" WTT2424 WTT3030 Quarter Round Transitional Surface Two splice plates provided For use with fixed height workstations only Available with flat vinyl T-edge or PVC edge For use as conferencing corner Wireway option not available Modesty panel not required 24" surface can be wrapped with System XXI curved panel on module 24" surface has radius of 262 3" and 30" surface has a radius of 35" WQRP version has pointed end removed to accommodate corner of two System XXI panels 24x24" WQR24 30x30" WQR30 24x24" for panel WQRP24 30x30" for panel WQRP30 A B C D E F G H All corner transitional surfaces connected at the same height do not require right (R) or left (L) transition direction. Use X for transition direction. Transition direction required for 97 transitional. HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C Select size of transitional worksurface. Select edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN 3L Select transition height direction.* L = Left R = Right X = None *Transition direction is determined from the originating 24" or 30" basic or keyboard pad worksurface. D E F Select transition height. 99 = 29" to 29" 97 = 29" to 27" Add $20 77 = 27" to 27" Indicate wireway option. NW = No Wireway WW = WireWay Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color G Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. H Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple BM = Biltmore Cherry BW = Brighton Walnut WY = Windsor Mahogany CC = Cocobala 24

27 FLEXSTATION Worksurfaces Standard Laminate Total Weight BN/3L with Wireway BN/3L without Wireway Joins table 30# " deep worksurface to 24" deep worksurface 30# " deep worksurface to 30" deep worksurface 34# " deep worksurface to 24" deep worksurface 51# " deep worksurface to 30" deep worksurface 34# " deep worksurface to 24" deep worksurface 51# " deep worksurface to 30" deep worksurface CT PV FM SF CP = Chocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Std SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 25

28 Worksurfaces FLEXSTATION MODEL NUMBER Left Right Edge Trans. Mod/ Edge MODEL W x D D x W Worksurface Style Direction Height WWay Beam Trim Laminate Color End-of-Run Corner Surface Two splice plates provided Full wrap modesty panel included For use with fixed height workstations only Available with flat vinyl T-edge or PVC vinyl edge, self edge Corner support leg is 7 8" square tubular steel Optional wireway End-of-Run Curvilinear Surface Full wrap modesty panel included For use with fixed height workstations only Available with T-edge or PVC vinyl edge, self edge Corner support leg is 7 8" square tubular steel Optional wireway End-of-Run Surface with Keyboard Pad Two splice plates provided Full wrap modesty panel included For use with fixed height workstations only Available with flat vinyl T-edge or3mm PVC vinyl edge, self edge Corner support leg is 7 8" square tubular steel Optional wireway 24x36" x 36x24" WER x42" x 42x24" WER x48" x 48x24" WER x42" x 42x30" WER x48" x 48x30" WER x36" x 36x24" WCCE x42" x 42x24" WCCE x48" x 48x24" WCCE x42" x 42x30" WCCE x48" x 48x30" WCCE x36 x 36x24 WERK x42" x 42x24" WERK x48" x 48x24" WERK x42 x 42x30 WERK x48" x 48x30" WERK3048 A B C D E F G H I When ordering an end-of-run worksurface, the adjoining worksurface must have a transitional leg. Order a right transitional, left transitional or both transitional. HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available.. HOW TO BUILD A MODEL NUMBER A B C D Select size of end-of-run worksurface. Select edge style. BN = Flat Vinyl T-edge 3L = PVC edge BN 3L Select transition direction. L = Left R = Right *Transition direction is determined from the originating 24" or 30" basic or keyboard pad worksurface. Select end-of-run height. 7 = 27" 9 = 29" Add $20 E F G Indicate wireway option. NW = No Wireway W2 = 36 WireWay W3 = 42 WireWay W4 = 48 WireWay Indicate beam or modesty panel. B = Beam M = Modesty Panel F = Full Modesty Add $70 Select trim color for painted surfaces. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color H Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. I Select edge color. CF = Cafe Au Lait FN = Flannel HM = Hardrock Maple CO = Castle Oak MM = Monticello Maple BM = Biltmore Cherry BW = Brighton Walnut WY = Windsor Mahogany CC = Cocobala CT = Chocolate Pear Tree 26

29 FLEXSTATION Worksurfaces LIST PRICES Standard Laminate Total Weight BN/3L with Wireway BN/3L without Wireway Joins table 74# $630 (W2) $565 24" deep worksurface to 24" deep worksurface 78# 662 (W3) " deep worksurface to 24" deep worksurface 82# 708 (W4) " deep worksurface to 24" deep worksurface 96# 662 (W3) " deep worksurface to 30" deep worksurface 100# 708 (W4) " deep worksurface to 30" deep worksurface 76# 667 (W2) " deep worksurface to 24" deep worksurface 96# 703 (W3) " deep worksurface to 24" deep worksurface 106# 753 (W4) " deep worksurface to 24" deep worksurface 108# 703 (W3) " deep worksurface to 30" deep worksurface 118# 753 (W4) " deep worksurface to 30" deep worksurface 803 (W2) " deep worksurface to 24" deep worksurface 78# 835 (W3) " deep worksurface to 24" deep worksurface 80# 881 (W4) " deep worksurface to 24" deep worksurface 102# 835 (W3) " deep worksurface to 30" deep worksurface 881 (W4) " deep worksurface to 30" deep worksurface PV FM SF CP = Provincial = Fusion Maple = Summer Flame = Other Std SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 27

30 General Information FLEXSTATION Components Venus Overhead VNOL p. 38 WOC and WDS Models: VNOL, VNOS and VNOF Models: Overhead Width Door Overhang In Open Position No. Of Doors Inside Width of Overhead Dimension Between Side Sets at Worksurface Overhead Width Door Overhang In Open Position No. Of Doors Inside Width of Overhead Dimension Between Side Sets at Worksurface 30" 33 4" 1 27" 251 4" 30" 3" /4" 27" 36" 33 4" 1 33" 311 4" 36" 3" /4" 33" 42" 33 4" 1 39" 371 4" 42" 3" /4" 39" 48" 33 4" 1 45" 431 4" 48" 3" /4" 45" 54" 33 4" 2 2 x 251 8" 491 4" 54" 3" " 51" 60" 33 4" 2 2 x 281 8" 551 4" 60" 3" " 57" 72" 33 4" 2 2 x 341 8" 671 4" 72" 3" 2 2 x 333 4" 2 x 34" Overall height from worksurface to top of overhead is 341 4". Overhead allows for 181 2" clearance from worksurface to underside of shelf. Overall height from worksurface to top of overhead is 36". Overhead top slants upward 1 from the back to the door. Overhead allows for 191 2" clearance from worksurface to underside of shelf. SPECIFICATIONS Wire Management 3 x 2" openings with protected edges are provided for all worksurfaces on both sides at top of modesty panels. Overheads (WOC, WDS Models) 5 8" Novaply with.050 laminate on the faces with vinyl edging. Slides are steel with steel ball bearings. Exceeds BIFMA requirements. Steel construction lock has five tumblers. Overhead locks can be keyed alike to match pedestals. Overheads also available with fabric finish. Privacy Screen Two 1 2" Gypsum boards joined together with industrial adhesive. Attaches to the rear of the worksurface using two or three 1 8" cold rolled steel brackets. Brackets attach to privacy screen with fasteners. Steel splice plates run the full height of the screen to align adjoining privacy screens. Privacy screen is " high above worksurface. Overheads (WZUS, WZUF, WZUL Models) Constructed of 18 gauge steel back, side panels and door front. Supported by 16 gauge steel uprights with concealed vertical wire management to conceal task light cord. Uprights are secured to top of steel legs through grommet holes. The steel door front is of honeycomb core construction with an enamel finish. Steel door front is available with upholstery or covered with high pressure laminate over particleboard core. Door front operates on a rack and pinion gear system utilizing a center lock mechanism. Door front stores recessed inside the cabinet with the dual durometer handle exposed. 72" overhead consists of two cabinets supported by a 16 gauge steel bracket located in the middle. Middle bracket is attached to the underside of the worksurface. Overhead Privacy Screen Same construction as basic privacy screen except that it mounts flush to the back of the overhead and is attached to the back of the overhead as well as to the underside of worksurface.overhead privacy screen is attached to the overhead and worksurface with fasteners. Middle support bracket on 72" overhead attaches to underside of worksurface. 28

31 FLEXSTATION Components General Information Universal Overhead Cabinet WZUS p. 32 Flipper Laminated Overhead Storage WOC p. 34 Privacy Screens WZP p. 40 Features Steel construction Solid core construction Wire management Enamel finish on metal parts Fabric covered Optional Field installable Plastic laminate surface Steel door Optional WZUS, WZUF, WZUL Models: Door Dimension Overhang Between Side In Open No. Of Inside Width Sets at Overhead Width Position Doors of Overhead Worksurface 30" 31 2" " 27" 36" 31 2" " 33" 42" 31 2" " 39" 48" 31 2" " 45" 54" 31 2" " 51" 60" 31 2" " 57" 72" 31 2" 2 2 x 351 2" 2 x 34" Overall height from worksurface to top of overhead is 36". Overhead allows for 191 2" clearance from worksurface to underside of shelf. INFORMATION Warranty See Terms and Conditions for general information. Structural Integrity years High wear parts such as fabrics, other coverings material/finishes, glides, slides and user adjustable work surface mechanisms year Electrical Products years 29

32 Overhead Storage FLEXSTATION Universal Overhead Cabinet with Steel Door The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a BSI office panel system. Steel end panels, bottom, top shelf, and door with powder-coated finish Double bit lock is included with key alike option Door stores recessed with handle exposed Shelf depth is 131 4" 72" overhead has two 36" doors For use with fixed height worksurfaces Concealed vertical wire management Secured to steel legs by concealed mounting brackets Accepts shelf divider Cannot be mounted on tables with casters or stand-up units 30x161 2x141 2" 36x161 2x141 2" 42x161 2x141 2" 48x161 2x141 2" 54x161 2x141 2" 60x161 2x141 2" 66x161 2x141 2" 72x161 2x141 2" MODEL NUMBER MODEL W x H x D Overhead Trim Key WZUS30 WZUS36 WZUS42 WZUS48 WZUS54 WZUS60 WZUS66 WZUS72 Steel Overhead Cabinet with Fabric Door The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a BSI office panel system. Steel end panels, bottom and top shelf with enamel finish Fabric-covered door Double bit lock is included with key alike option End panel bracket design prevents accidental dislodging of components Shelf depth is 131 4" Door stores recessed with handle exposed 72" overhead has two 36" doors For use with fixed height worksurfaces Concealed vertical wire management Secured to steel legs by concealed mounting brackets Accepts shelf divider Cannot be mounted on tables with casters or stand-up units 30x161 2x141 2" 36x161 2x141 2" 42x161 2x141 2" 48x161 2x141 2" 54x161 2x141 2" 60x161 2x141 2" 66x161 2x141 2" 72x161 2x141 2" WZUF30 WZUF36 WZUF42 WZUF48 WZUF54 WZUF60 WZUF66 WZUF72 A B C HOW TO ORDER HOW TO BUILD A MODEL NUMBER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. A B C Select basic model. Select trim color for painted surfaces. Select key option. KA = Key alike KS = Key standard Select Fabric - WZUF Panel fabric samples are available online and by request. Note: Different lock options are available. Please call the Sales Department for details. 30

33 FLEXSTATION Overhead Storage LIST PRICES Total Weight Overhead Storage 72# $763 81# # # # # # # # $798 81# # # # # # # 1447 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 31

34 Overhead Storage FLEXSTATION MODEL NUMBER MODEL Trim Laminate Key W x H x D Overhead Color Color Option Universal Overhead Cabinet with Laminate Door 30x161 2x141 2" WZUL30 The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a 36x161 2x141 2" WZUL36 BSI office panel system. 42x161 2x141 2" WZUL42 Steel end panels, bottom, top shelf, and door with powder-coated finish 48x161 2x141 2" WZUL48 Double bit lock is included with key alike option 54x161 2x141 2" WZUL54 Door stores recessed with handle exposed Shelf depth is 131 4" 60x161 2x141 2" WZUL60 End panel bracket design prevents accidental dislodging 66x161 2x141 2" WZUL66 of components 72" overhead has two 36" doors 72x161 2x141 2" WZUL72 For use with fixed height worksurfaces Concealed vertical wire management Secured to steel legs by concealed mounting brackets High-pressure laminate on particleboard door Cannot be mounted on tables with casters or stand-up units Universal Shelf 30 x x13 1 4" WUSS30 The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a 36 x x13 1 4" WUSS36 BSI office panel system. 42 x x13 1 4" WUSS42 Powder-coated end panels and bottom shelf Accepts shelf dividers 48 x x13 1 4" WUSS48 End bracket design prevents accidental dislodging of 54 x x13 1 4" WUSS54 components Shelf depth is 131 4" 60 x x13 1 4" WUSS60 Concealed vertical wire management 66 x x13 1 4" WUSS66 Secured to steel legs by concealed mounting brackets Field installable to compatible Flexstation surfaces 72 x x13 1 4" WUSS72 72" shelf consists of two 36" shelves supported by middle upright Cannot be mounted on tables with casters or stand-up units Shelf Divider Steel shelf dividers with enamel finish Fits shelves and cabinets on pages 37 and " x " NSD A B C D HOW TO ORDER HOW TO BUILD A MODEL NUMBER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. A B C Select basic model. Select trim color for painted surfaces. Select laminate surface (WZUL). SP = Standard laminate CP = Customer specified laminate NOTE: Laminate swatches are available online and by request. D Select key option. KA = Key alike KS = Key standard 32

35 FLEXSTATION Overhead Storage LIST PRICES Total Weight Overhead Storage 73# $858 81# # # # # # # # $553 69# # # # # # # 970.5# 14 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 33

36 Corner Overhead Storage FLEXSTATION Corner Universal Overhead Cabinet with Steel Door The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a BSI office panel system. Steel end panels, bottom, top shelf, and door with powder-coated finish Double bit lock is included with key alike option Door stores recessed with handle exposed Shelf depth is 131 4" 72" overhead has two 36" doors For use with fixed height worksurfaces Concealed vertical wire management Secured to steel legs by concealed mounting brackets Accepts shelf divider Cannot be mounted on tables with casters FOR USE ON CORNER UNIT 36x161 2x141 2" 42x161 2x141 2" 48x161 2x141 2" MODEL NUMBER MODEL W x H x D Overhead Direction Trim Key WZUSC36 WZUSC42 WZUSC48 Corner Steel Overhead Cabinet with Fabric Door The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a BSI office panel system. Steel end panels, bottom and top shelf with enamel finish Fabric-covered door Double bit lock is included with key alike option End panel bracket design prevents accidental dislodging of components Shelf depth is 131 4" Door stores recessed with handle exposed 72" overhead has two 36" doors For use with fixed height worksurfaces Concealed vertical wire management Secured to steel legs by concealed mounting brackets Accepts shelf divider Cannot be mounted on tables with casters FOR USE ON CORNER UNIT 36x161 2x141 2" 42x161 2x141 2" 48x161 2x141 2" WZUFC36 WZUFC42 WZUFC48 A B C D HOW TO ORDER HOW TO BUILD A MODEL NUMBER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. A B Select basic model. Select direction. L = Left R = Right Select Fabric - WZUF Panel fabric samples are available online and by request. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. C Select trim color for painted surfaces. D Select key option. KA = Key alike KS = Key standard Note: Different lock options are available. Please call the Sales Department for details. 34

37 FLEXSTATION Corner Overhead Storage LIST PRICES Total Weight Overhead Storage 81# $791 88# # # $834 89# # 873 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 35

38 Corner Overhead Storage FLEXSTATION MODEL NUMBER MODEL Trim Laminate Key W x H x D Overhead Directiuon Color Color Option Corner Universal Overhead Cabinet with Laminate Door 36x161 2x141 2" WZULC36 The BSI Universal Overhead allows users the option to interchange from a Flexstation desk mount solution to a 42x161 2x141 2" WZULC42 BSI office panel system. Steel end panels, bottom, top shelf, and door with 48x161 2x141 2" WZULC48 powder-coated finish Double bit lock is included with key alike option Door stores recessed with handle exposed Shelf depth is 131 4" End panel bracket design prevents accidental dislodging of components 72" overhead has two 36" doors For use with fixed height worksurfaces Concealed vertical wire management Secured to steel legs by concealed mounting brackets High-pressure laminate on particleboard door Cannot be mounted on tables with casters FOR USE ON CORNER UNIT Corner Universal Shelf 36 x x13 1 4" WUSSC36 The BSI Universal Overhead allows users the option to 42 x x13 1 4" WUSSC42 interchange from a Flexstation desk mount solution to a BSI office panel system. 48 x x13 1 4" WUSSC48 Powder-coated end panels and bottom shelf Accepts shelf dividers End bracket design prevents accidental dislodging of components Shelf depth is 131 4" Concealed vertical wire management Secured to steel legs by concealed mounting brackets Field installable to compatible Flexstation surfaces 72" shelf consists of two 36" shelves supported by middle upright Cannot be mounted on tables with casters FOR USE ON CORNER UNIT 7 1 4" x " NSD Shelf Divider Steel shelf dividers with enamel finish Fits shelves and cabinets on pages 37 and 38 A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. HOW TO BUILD A MODEL NUMBER A B Select basic model. Select direction. L = Left R = Right E Select key option. KA = Key alike KS = Key standard NLC = No lock core Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. C Select trim color for painted surfaces. D Select laminate surface (WZUL). SP = Standard laminate CP = Customer specified laminate NOTE: Laminate swatches are available online and by request. 36

39 FLEXSTATION Corner Overhead Storage LIST PRICES Total Weight Overhead Storage 81# # # # # # 595.5# 14 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 37

40 Overhead Storage FLEXSTATION MODEL NUMBER MODEL Overhead Door Trim Side Laminate Edge Color Door Laminate Key Overhead Cabinets and Shelves Laminated Solid core construction with plastic laminate 30" single door WOC30 Enamel finish on metal parts Cabinet doors have laminated or upholstered surface 36" single door WOC36 with flat vinyl edge 42" single door WOC42 Concealed vertical wire management Secured to steel legs by concealed mounting brackets 48" single door WOC48 Field installable to compatible FlexStation worksurfaces Two 27" doors WOC54 Key-different (standard) or key-alike (optional) to match other overheads and/or pedestals (Specify which items Two 30" doors WOC60 need to be key-alike on order.) Two 33" doors WOC66 For use with fixed height workstations only Overhead allows for clearance above Two 36" doors WOC72 worksurface Upholstered Overall height is Cannot be mounted on tables with casters 30" single door WOCF30 36" single door WOCF36 42" single door WOCF42 48" single door WOCF48 Two 27" doors WOCF54 Two 30" doors WOCF60 Two 33" doors WOCF66 Two 36" doors WOCF72 Open Shelf 30" WOS30 Solid core construction with plastic laminate 36" WOS36 Enamel finish on metal parts Concealed vertical wire management 42" WOS42 Secured to steel legs by concealed mounting brackets 48" WOS48 Field installable to compatible FlexStation worksurfaces For use with fixed height workstations only 54" WOS54 Overhead allows for clearance above 60" WOS60 worksurface Overall height is WCS66 Cannot be mounted on tables with casters 72" WOS72 A B C D E F G HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C D Select size of overhead. Length of overhead must be identical to length of worksurface. Select flipper door position (WDS). L = Left R = Right Select trim color for painted surfaces. Select side laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. E F Select edge color. Select door laminate surface (WOC, WDS). SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. G Select key option. KA = Key alike KS = Key Standard Specify Fabric - WOCF, WDSF Panel fabric swatches are available online or by request. 38

41 FLEXSTATION Overhead Storage LIST PRICES Total Weight 70# $601 75# # # # # # # # $622 75# # # # # # # # # # # # # # # 391 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 39

42 Overhead Storage FLEXSTATION MODEL NUMBER MODEL Overhead Trim Paint Laminate Door Color Venus Overhead with Solid Translucent Door 24" single door VNOS24FX Stanchions and mounting brackets included 30" single door VNOS30FX Colored or translucent extruded PVC door Painted cabinet and lower door 36" single door VNOS36FX Shelf dividers available separately 42" single door VNOS42FX 72 consists of 36 and 36 cabinets supported at juncture of cabinets by support stanchion 48" single door VNOS48FX Cabinet is fully assembled 54" single door VNOS54FX Door stores above top cabinet 60" single door VNOS60FX Two doors 30 & 36 VNOS60FX Two 36" doors VNOS72FX Venus Overhead with Laminate Door Stanchions and mounting brackets included Laminate covered door Painted cabinet and lower door Shelf dividers available separately 72 consists of 36 and 36 cabinets supported at juncture of cabinets by support stanchion Cabinet is fully assembled Door stores above top cabinet 24" single door 30" single door 36" single door 42" single door 48" single door 54" single door 60" single door VNOL24FX VNOL30FX VNOL36FX VNOL42FX VNOL48FX VNOL54FX VNOL60FX Two doors 30 & 36 VNOL66FX Two 36" doors VNOL72FX Venus Overhead with Fabric Door Stanchions and mounting brackets included Fabric covered upper door Painted cabinet and lower door Shelf dividers available separately 72 consists of 36 and 36 cabinets supported at juncture of cabinets by support stanchion Cabinet is fully assembled Door stores above top cabinet 24" single door 30" single door 36" single door 42" single door 48" single door 54" single door VNOF24FX VNOF30FX VNOF36FX VNOF42FX VNOF48FX VNOF54FX 60" single door VNOF60FX Two doors 30 & 36 VNOF66FX Two 36" doors VNOF72FX A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C Select size of overhead. Length of overhead must be identical to length of worksurface. Select trim color Select paint color CO = Cottonwood CW = Creamy White MZ = Moss CE = Chamomile CF = Cafe au Lait GX = Grape BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel DO = Dolphin HX = Thermal SH = Splash MR = Marine Teal ND = Nordic WP = Whisper TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand CM = Champagne Metallic EX = Espresso Metallic MM = Malachite Metallic MO = Moonbeam Metallic OM = Old Gold Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic D Select laminate surface (VNOL). SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. E Select door color (VNOS). TR = Translucent Select Fabric - VNOF Panel fabric swatches are available online and by request. 40

43 FLEXSTATION Overhead Storage LIST PRICES Total Weight 49# $821 52# # # # # # # # # $859 52# # # # # # # # # $871 46# # # # # # # # 1626 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 41

44 Overhead Storage FLEXSTATION MODEL NUMBER MODEL Overhead Trim Paint Laminate Door Color Venus Overhead with Solid Translucent Door 24" single door VNOSLB24FX Stanchions and mounting brackets included 30" single door VNOSLB30FX Colored or translucent extruded PVC door Painted cabinet and lower door 36" single door VNOSLB36FX Shelf dividers available separately 42" single door VNOSLB42FX 72 consists of 36 and 36 cabinets supported at juncture of cabinets by support stanchion 48" single door VNOSLB48FX Cabinet is fully assembled 54" single door VNOSLB54FX Door stores above top cabinet With Load Bar 60" single door VNOSLB60FX Venus Overhead with Laminate Door Stanchions and mounting brackets included Laminate covered door Painted cabinet and lower door Shelf dividers available separately 72 consists of 36 and 36 cabinets supported at juncture of cabinets by support stanchion Cabinet is fully assembled Door stores above top cabinet With Load Bar 24" single door VNOLLB24FX 30" single door VNOLLB30FX 36" single door VNOLLB36FX 42" single door VNOLLB42FX 48" single door VNOLLB48FX 54" single door VNOLLB54FX 60" single door VNOLLB60FX Venus Overhead with Fabric Door Stanchions and mounting brackets included Fabric covered upper door Painted cabinet and lower door Shelf dividers available separately 72 consists of 36 and 36 cabinets supported at juncture of cabinets by support stanchion Cabinet is fully assembled Door stores above top cabinet With Load Bar 24" single door VNOFLB24FX 30" single door VNOFLB30FX 36" single door VNOFLB36FX 42" single door VNOFLB42FX 48" single door VNOFLB48FX 54" single door VNOFLB54FX 60" single door VNOFLB60FX A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B C Select size of overhead. Length of overhead must be identical to length of worksurface. Select trim color Select paint color CO = Cottonwood CW = Creamy White MZ = Moss CE = Chamomile CF = Cafe au Lait GX = Grape BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel DO = Dolphin HX = Thermal SH = Splash MR = Marine Teal ND = Nordic WP = Whisper TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand CM = Champagne Metallic EX = Espresso Metallic MM = Malachite Metallic MO = Moonbeam Metallic OM = Old Gold Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic D Select laminate surface (VNOL). SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request. E Select door color (VNOS). TR = Translucent Select Fabric - VNOF Panel fabric swatches are available online and by request. 42

45 FLEXSTATION Overhead Storage LIST PRICES Total Weight 49# $676 52# # # # # # # $778 52# # # # # # # $721 46# # # # # # 970 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 43

46 Privacy Screens FLEXSTATION MODEL NUMBER Privacy MODEL Features W x H Screen Trim On Worksurface Privacy Screen 1" thick screen upholstered with tackable fabric Painted steel mounting brackets Screens available for all worksurfaces and transitional surfaces Field installable Provides seated privacy WZP60 has two 30" privacy screens with connector WZP72 has two 36" privacy screens with connector Corner (square and rectangular) screens come as a set with splice plate Provides 3 4" space between screen and worksurface for cables Basic Privacy Screen 24x19" WZP2400 For use on 30x19" WZP3000 VNOS,VNOL,VNOF 36x19" WZP3600 and WOC 42x19" WZP x19" WZP x19" WZP x19" WZP x19" WZP x19" WZP7200 Corner Privacy Screens 36x19" WZPC2436 (2 screens) 42x19" WZPC x19" WZPC3048 Transitional surfaces square (2 screens) 24x19" WZPS2424 square (2 screens) 30x19" WZPS3030 rectangle (2 screens) 30x24x19" WZPR3024 Overhead Privacy Screen For use on WZUS, WZUL and WZUF overheads and WUSS shelves only 1" thick screen upholstered with tackable fabric Painted steel mounting brackets Available on rectangular worksurfaces only 60" screen consists of two 30" screens with middle support and 72" screen consists of two 36" screens with middle support Overhead privacy screen attaches to worksurface and overhead and mounts flush with overhead Overhead cabinets 30x19" WZOP30 36x19" WZOP36 42x19" WZOP42 48x19" WZOP48 54x19" WZOP54 60x19" WZOP60 66x19" WZOP66 72x19" WZOP72 A B HOW TO ORDER HOW TO BUILD A MODEL NUMBER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. A B Select privacy screen size. Select trim color. 44

47 FLEXSTATION Privacy Screens LIST PRICES Total Weight Privacy Screens 13# $ # # # # # # # # # # # # # # # # # # # # # # 430 SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 45

48 General Information FLEXSTATION Accessories Tool Rail PMTR p. 42 Features Painted aluminum Field installable SPECIFICATIONS Tool Rail Aluminum extrusion tool rail, enamel finish. Attaches between overhead uprights. Consists of four slots to accept paper management components. For additional Accesories see Accessories Pricelist. 46

49 FLEXSTATION Accessories General Information INFORMATION Warranty See Terms and Conditions for general information. Structural Integrity years High wear parts such as fabrics, other coverings material/finishes, glides, slides and user adjustable work surface mechanisms year Electrical Products years 47

50 Accessories FLEXSTATION MODEL NUMBER Basic MODEL H x W x D Model Color Tool Rail Accommodates paper management components Attaches between overhead uprights Field installable (fasteners not included) Painted aluminum construction 72" rail consists of two 36" rails with middle support Consists of four slots to accept components 72 Tool Rail works with Metal Overhead Storage only. Laminate End Overhead Tool Rail 41 2" 30" PMTR " 36" PMTR " 42" PMTR " 48" PMTR " 54 PMTR " 60" PMTR " 72" PMTR72 66" PMTR66LAM 72" PMTR72LAM Guest Modesty Can be used on any peninsula or suare shoe Non-handed works as either left or right 19-ga steel 9 High Located 45 from the guest side of the worksurface 60" WZMP60 66" WZMP66 72" WZMP72 84" WZMP84 Full Leg End Panel Non-handed works as either left or right Attaches over exsisting leg 30" WBW24FEP 36" WBW30FEP A B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A B B Select basic model. Select tool rail color. SX = Starligh Silver Select paint color. SX = Starligh Silver CM = Champagne Metallic EX = Espresso Metallic For more accessories please see the Accessories Pricleist 48

51 FLEXSTATION Accessories LIST PRICES Total Weight Accessories 4# $120 5# 126 6# 137 6# 143 7# 151 7# 197 8# SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. s quick and easy. 49

52 50 FLEXSTATION with Power Up

53 FLEXSTATION with Power Up General Information SPECIFICATIONS PowerUp Power/Data Module PowerUp Power/Data Module The power/data module is inserted into a rectangular hole in the worksurface. The module has a flip-up cover and is 6-1/4" long x 3" wide x 2-1/2" high. It has one duplex receptacle (110 volts), dual data access and a power cord with a 3-prong plug. The cord is 108" long when used without 10-wire (NP) system and 22" long when used with 10- wire (T6) tables. Connections for phones, modems, printers and networks can be incorporated into the system, but must be ordered separately by the customer through a third party source. Communications wiring is completed in the field by the customer. Each unit ships with a data plate tree which provides holders for common jacks produced by AT&T, Panduit, and others. Contact BSI Customer Service for more information. The single module is located at the rear right, rear left or center position of the worksurface widths 30" through 54". Two modules are available on 60", 66" and 72" wide rectangular surfaces and are located at the rear left and rear right position of the worksurface. Data Door The data door (WT) is constructed of rigid PVC.06 wall thickness with a radius of 2-1/2". The door is 8" deep and 4-1/2" high. It attaches to the underside of the table top. The hanging bracket uses the same hole as the modesty panel and can also be used with WB option. Power and data cables are separated from each other by a 24- gauge steel divider that is 2" high by 2-3/4" deep. There is also space allowed for cord management. Available in black only. Table-To-Table Wireway The table-to-table wireway trough is a 16-gauge steel trough that attaches to the underside of the adjoining worksurface. The wireway is 3-3/4" deep by 4-1/4" wide. The wireway routes the 10-wire table-to-table connector and data wires between tables. The wire management trough also includes a splice plate that attaches the front of the adjoining tops together to prevent separation. 10-Wire 6-Circuit Pre-Wired Harness Single sided, rigid 10-wire harness that holds two duplex receptacles (60", 66" and 72" wide tables provide access for up to four duplex receptacles). Harness contains 6 hot wire, 2 neutral wires an 2 ground wires and is commonly referred to as (6-2-2). The harness has mounting brackets to attach to the underside of the worksurface top with screws. The harness is 2-1/2" wide and the length of the harness varies with the size of the top. Power is obtained by use of the 10-wire Power Infeed Kit. Duplex receptacles are located under the worksurface are specified separately. 10-Wire Table-To-Table Connector 10-wire table-to-table connector consists of flexible mesh conduit which provides power connections from adjoining tables. The jumper is 17-3/4" long and is routed through the table-to-table wireway. 10-Wire Power Infeed Kit The 10-wire infeed kit provides power from fixed, floor, or wall sources to the 10-wire harness. It includes six feet of plastic covered flexible conduit, and 3/4" waterproof 90º connector. Also included are two steel covers which replace the existing plastic vertical wireway. PowerUp On FlexStation Applications Level One - Instances where laptops are used but under the worksurface wire management is not crucial. Example: when a user is interested in only the power aspect of the module and will not run data wires. Level Two - Instances where laptops are not used; therefore, the surface module is not required. However, it is necessary to conceal the cords and wires. Example: a computer lab where extension cords are used to plug in desktop computers. Note: Power supply cords are not to be routed across or through more than one complete unit/worksurface. Level Three - Instances where laptops are used and it is necessary to conceal cords and wire. Example: a computer lab where extension cords are used to plug in a desktop computer (under the worksurface) plus there needs to be a provision for laptops. Level Four - Instances where a prewired four- circuit harness is required. Example: several desktop computers per row but laptops are not required. Level Five - Instances where a prewired four- circuit harness is required. Example: several desktop computers per row plus the need to provide for laptops. Notched Vertical Wireway The notched vertical wireway consists of the following: WW = Wireway (standard horizontal Flexstation wireway only available on Level One) CW = Notched Vertical Wireway - Both vertical wireways are notched to allow wires to be routed to adjoining tables on both sides of the centrally located table. Warranty See "Terms and Conditions" for general information. UL Listed The Flexstation with PowerUp System is listed to applicable UL standards and requirements by Underwriters Laboratories Inc. Two of the standards used to evaluate Flexstation are UL/286 Office Furnishings and UL/723 Standard for Test for Surface Burning Characteristics of Building Materials. The standard used to evaluate PowerUp is UL 1363 Relocatable Power Taps. 51

54 Level One FLEXSTATION with Power Up PowerUp Parts Listing Item No Item Description Flexstation Top with cutout for PowerUp module Bullnose Edge Power Data Module with 108" cord Steel Guard 52

55 FLEXSTATION with Power Up Level Two PowerUp Parts Listing Item No. 1 2 Item Description Data Door Extrusion 30" Data Door Extrusion 36" Data Door Extrusion 42" Data Door Extrusion 48" Data Door Extrusion 54" Data Door Extrusion 60" Data Door Extrusion 72" Door Mounting Bracket 30" Door Mounting Bracket 36" Door Mounting Bracket 42" Door Mounting Bracket 48" Door Mounting Bracket 54" Door Mounting Bracket 60" Door Mounting Bracket 72" Table-To-Table Wireway Splice Plate Notched Vertical Wireway (used in conjunction with table-to-table cover) Cap for vertical wireway Clips for Door 3 Steel Power/Data Divider 30" Steel Power/Data Divider 36" Steel Power/Data Divider 42" Steel Power/Data Divider 48" Steel Power/Data Divider 54" Steel Power/Data Divider 60" Steel Power/Data Divider 72" 53

56 Level Three FLEXSTATION with Power Up PowerUp Parts Listing Item No. 1 Item Description Data Door Extrusion 30" Data Door Extrusion 36" Data Door Extrusion 42" Data Door Extrusion 48" Data Door Extrusion 54" Data Door Extrusion 60" Data Door Extrusion 72" Clips for Door Table-To-Table Wireway Splice Plate Cap for Wireway Notched Vertical Wireway (used in conjunction with table-to-table cover) 2 Door Mounting Bracket 30" Door Mounting Bracket 36" Door Mounting Bracket 42" Door Mounting Bracket 48" Door Mounting Bracket 54" Door Mounting Bracket 60" Door Mounting Bracket 72" 9 10 Power Data Module with 108" cord Flexstation Top only with cutout (Bullnose) 3 Steel Power/Data Divider 30" Steel Power/Data Divider 36" Steel Power/Data Divider 42" Steel Power/Data Divider 48" Steel Power/Data Divider 54" Steel Power/Data Divider 60" Steel Power/Data Divider 72" 54

57 FLEXSTATION with Power Up Level Four PowerUp Parts Listing Item No. 1 2 Item Description Data Door Extrusion 30" Data Door Extrusion 36" Data Door Extrusion 42" Data Door Extrusion 48" Data Door Extrusion 54" Data Door Extrusion 60" Data Door Extrusion 72" Door Mounting Bracket 30" Door Mounting Bracket 36" Door Mounting Bracket 42" Door Mounting Bracket 48" Door Mounting Bracket 54" Door Mounting Bracket 60" Door Mounting Bracket 72" Cap for Wireway Notched Vertical Wireway (used in conjunction with table-to-table cover) 10-Wire Harness 30" 10-Wire Harness 36" 10-Wire Harness 42" 10-Wire Harness 48" 10-Wire Harness 54" 10-Wire Harness 60" 10-Wire Harness 72" Duplex Receptacles (optional - must be ordered separately) Steel Power/Data Divider 30" Steel Power/Data Divider 36" Steel Power/Data Divider 42" Steel Power/Data Divider 48" Steel Power/Data Divider 54" Steel Power/Data Divider 60" Steel Power/Data Divider 72" Clips for Door Table-To-Table Wireway Splice Plate Wire Table-To-Table Connector (optional - must be ordered separately) Flexstation Top only (Bullnose) Steel Infeed 27" Cover Plate Assembly Steel Infeed 29" Cover Plate Assembly Steel Infeed 42" Cover Plate Assembly (optional - must be ordered separately) 55

58 Level Five FLEXSTATION with Power Up PowerUp Parts Listing Item No. 1 2 Item Description Data Door Extrusion 30" Data Door Extrusion 36" Data Door Extrusion 42" Data Door Extrusion 48" Data Door Extrusion 54" Data Door Extrusion 60" Data Door Extrusion 72" Door Mounting Bracket 30" Door Mounting Bracket 36" Door Mounting Bracket 42" Door Mounting Bracket 48" Door Mounting Bracket 54" Door Mounting Bracket 60" Door Mounting Bracket 72" Cap for Vertical Wireway Notched Vertical Wireway 10-Wire Harness 30" 10-Wire Harness 36" 10-Wire Harness 42" 10-Wire Harness 48" 10-Wire Harness 54" 10-Wire Harness 60" 10-Wire Harness 72" Duplex Receptacles (optional - must be ordered separately) Steel Power/Data Divider 30" Steel Power/Data Divider 36" Steel Power/Data Divider 42" Steel Power/Data Divider 48" Steel Power/Data Divider 54" Steel Power/Data Divider 60" Steel Power/Data Divider 72" Clips for Door Table-To-Table Wireway Splice Plate Wire Table-To-Table Connector (optional - must be ordered separately) Power Data Module with 22" cord Flexstation Top only with cutout - (Bullnose) Steel Infeed 27" Cover Plate Assembly Steel Infeed 29" Cover Plate Assembly Steel Infeed 42" Cover Plate Assembly (optional - must be ordered separately) 56

59 FLEXSTATION with Power Up 57

60 Levels One, Three and Five FLEXSTATION with Power Up MODEL NUMBER Edge P-Up Wire Elec Paint Insert Edge Accessory Module MODEL D x W Worksurface Style Mod Hgt Trough Option Mod Tr Legs Grommet Color Color Lam Color Level Color Basic Worksurface One PowerUp module One or two PowerUp modules available on 60" and 72" wide surfaces. 24x30" WBWD x36" WBWD x42" WBWD x48" WBWD x54" WBWD x30" WBWD x36" WBWD x42" WBWD x48" WBWD x54" WBWD x60" WBWD2460 B 9 24x60 WBWD x66 WBWD2466 B 9 24x66 WBWD x72" WBWD2472 B 9 24x72 WBWD x60" WBWD3060 B 9 30x60 WBWD X66 WBWD3066 B 9 30X66 WBWD x72 WBWD3072 B 9 30x72" WBWD A B C D E F G H I J K L M N O HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. HOW TO BUILD A MODEL NUMBER A B C D Select size/style of worksurface. Select edge style. BN = Flat vinyl T-edge 3L = PVC edge BN Select data location L = Left R = Right C = Center B = Left and right. Only available on 60" & 72" worksurfaces. Select height. 9 = 29 3L E F F G Indicate wireway option. NT = No Trough WT = With Trough Select electical option. NP = No Power T6 = T6 Power If T6 power is specified, receptioles, jumopers and infeeds are to be specified separatley. Indicate modesty option. M = Modesty B = Beam F = Full Modesty Add $70 Indicate location and type of leg* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left ( left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *Note: If ordering basic worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available. I J J Select grommet optioon. N = No Grommet Y = Yes Worksurface Grommet Select color for painted surface. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color Select laminate surface. S = Standard Laminate C = Customer Specified Laminate NOTE: Laminate swatches are available online and by request 58

61 FLEXSTATION with Power Up Levels One, Three and Five LIST PRICES Standard Laminate Weight Level One Level Three Level Five 29" BN/3L BN/3L BN/3L 76# $585 $651 $737 83# # # # # # # # # # # # # # # # # # # # # SPECIAL SERVICES K L Select edge color. Select accessory level. L1 = Consists of one or two PowerUp modules with 108" cord. L3 = Consists of one or two PowerUp modules with 108" cord plus data door with steel divider, table-to-table steel wireway, splice plate and notched vertical wireways. L5*** = Consists of one or two power modules with 22 cord, data door with steel divider, table-to-table steel wireway, splice plate, notched vertical wire-ways, 10-Wire four circuit pre-wired harness. ***Duplex receptacles must be ordered separately. See page 70. ***Floor infeed (four-circuit pre-wired) must be ordered separately. See page 70. ***10-Wire table-to-table connector must be ordered separately. See page 70. M Select module color. B = Black S = Sand W = Warm Grey G = Grey List Prices For dock delivery add 5%. For installation add an additional 8%. 59

62 Levels One, Three and Five FLEXSTATION with Power Up MODEL NUMBER Edge Trans. Data Trim Edge Accessory Module MODEL D x W Worksurface Style Direction Location Hgt WWay Mod Tr Legs Color Laminate Color Level Color Standalone Corner Worksurface 24x36" WCSD x42" WCSD x48" WCSD Transitional Corner Worksurface 24x36" WCTD x42" WCTD x48" WCTD End of Run Corner Worksurface 24x36 WERD x42" WERD x48 WERD A B C D E F G H I J K L M HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. HOW TO BUILD A MODEL NUMBER A Select size/style of worksurface. B Select edge style. BN = Flat vinyl T-edge 3L = PVC edge BN 3L E F. G Select height. 9 = 29 Indicate wireway option. WW = Wireway (only on Level One) Indicate modesty option. M = Modesty B = Beam I Select trim color for painted surface. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color C D Select transition direction L = Left R = Right Select data location DL = Left DR = Right DC = Center H Indicate location and type of leg* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left ( left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *Note: If ordering basic worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available. J Select laminate surface. S = Standard Laminate C = Customer Specified Laminate NOTE: Laminate swatches are available online and by request 60

63 FLEXSTATION with Power Up Levels One, Three and Five LIST PRICES Standard Laminate Level One Level Three Level Five BN/3L BN/3L BN/3L $890 $1037 $ SPECIAL SERVICES K L Select edge color. B = Black S = Sand W = Warm Grey G = Grey Select accessory level. L1 = Consists of one or two PowerUp modules with 108" cord. L3 = Consists of one or two PowerUp modules with 108" cord plus data door with steel divider, table-to-table steel wireway, splice plate and notched vertical wireways. L5*** = Consists of one or two power modules with 22 cord, data door with steel divider, table-to-table steel wireway, splice plate, notched vertical wire-ways, 10-Wire four circuit pre-wired harness. ***Duplex receptacles must be ordered separately. See page 70. ***Floor infeed (four-circuit pre-wired) must be ordered separately. See page 70. ***10-Wire table-to-table connector must be ordered separately. See page 70. M Select module color. B = Black S = Sand W = Warm Grey G = Grey List Prices For dock delivery add 5%. For installation add an additional 8%. 61

64 Levels Two and Four FLEXSTATION with Power Up MODEL NUMBER Edge Key Trim Edge Accessory Accessory MODEL D x W Worksurface Style Pad Hgt WWay Tr Legs Color Laminate Color Level Color Basic Worksurface 24x30" WBW CW 24x36" WBW CW 24x42" WBW CW 24x48" WBW CW 24x54" WBW CW 30x30" WBW CW 30x36" WBW CW 30x42" WBW CW 30x48" WBW CW 30x54" WBW CW 24x60" WBW CW 24x66 WBW CW 24x72" WBW CW 30x60" WBW CW 30x66" WBW CW 30x72" WBW CW A B C D E F G H I J K HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. HOW TO BUILD A MODEL NUMBER A Select size style of worksurface. B Select edge style. BN = Flat vinyl T-edge 3L = PVC edge BN 3L C Location of key pad. C = Center R = Right L = Left E F Indicate wireway option. CW = Notched vertical wireway (both vertical wireways are notched) Indicate location and type of leg* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left ( left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *Note: If ordering basic worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available. G Select trim color for painted surface. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color D Select height. 9 = 29 62

65 FLEXSTATION with Power Up Levels Two and Four LIST PRICES Standard Laminate Weight Weight Level Two Level Four 27" 29" BN/3L BN/3L 73# 76# $553 $641 80# 83# # 90# # 96# # 103# # 83# # 90# # 99# # 107# # 113# # 109# # 123# # 120# # 133# # 133# # 133# H Select laminate surface. SP = Standard Laminate CP = Customer Specified Laminate NOTE: Laminate swatches are available online and by request I Select edge color. ***Duplex receptacles must be ordered separately. See page 70. ***Floor infeed (four-circuit pre-wired) must be ordered separately. See page 70. ***10-Wire table-to-table connector must be ordered separately. See page 70. K Select accessory color. SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. J Select accessory level L2 = Consists of consists of data door with steel divider, table-to-table steel wireway, splice plate and notched vertical wireway. L4*** = Consists of consists of data door with steel divider, table-to-table steel wireway, splice plate, notched vertical wireway, 10-Wire four circuit pre-wired harness. 63

66 Levels Two and Four FLEXSTATION with Power Up MODEL NUMBER Edge Trans. Data Trim Edge Accessory Module MODEL D x W Worksurface Style Direction Location Hgt WWay Mod Tr Legs Color Laminate Color Level Color Standalone Corner Worksurface 24x36" WCSD x42" WCSD x48" WCSD Transitional Corner Worksurface 24x36" WCTD x42" WCTD x48" WCTD End of Run Corner Worksurface 24x36 WERD x42" WERD x48 WERD A B C D E F G H I J K L M HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. HOW TO BUILD A MODEL NUMBER A Select size/style of worksurface. B Select edge style. BN = Flat vinyl T-edge 3L = PVC edge BN 3L C Select transition direction L = Left R = Right D Select data location DL = Left DR = Right DC = Center E F. G H Select height. 9 = 29 Indicate wireway option. WW = Wireway (only on Level One) Indicate modesty option. M = Modesty B = Beam F = Full Modesty Add $70 Indicate location and type of leg* S = Standard (both standard legs) R = Right (right transitional leg) Add $6 L = Left ( left transitional leg) Add $6 B = Both (both transitional legs) Add $12 *Note: If ordering basic worksurface as a freestanding unit, or if only one side connects to a transitional worksurface, the B option for both transitional legs is not available. I J Select trim color for painted surface. CF = Cafe Au Lait CM = Champagne Metallic EX = Espresso Metallic MZ = Moss SX = Starlight Silver CP = Other Standard Color Select laminate surface. S = Standard Laminate C = Customer Specified Laminate NOTE: Laminate swatches are available online and by request 64

67 FLEXSTATION with Power Up Levels Two and Four LIST PRICES Standard Laminate Level Two BN/3L Level Four BN/3L $907 $ K Select edge color. B = Black S = Sand W = Warm Grey G = Grey ***Duplex receptacles must be ordered separately. See page 70. ***Floor infeed (four-circuit pre-wired) must be ordered separately. See page 70. ***10-Wire table-to-table connector must be ordered separately. See page 70. SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. L Select accessory level L2 = Consists of consists of data door with steel divider, table-to-table steel wireway, splice plate and notched vertical wireway. L4*** = Consists of consists of data door with steel divider, table-to-table steel wireway, splice plate, notched vertical wireway, 10-Wire four circuit pre-wired harness. M Select module color. B = Black S = Sand W = Warm Grey G = Grey 65

68 Electrical FLEXSTATION with Power Up MODEL NUMBER Basic Trim Total MODEL Model Color Weight Floor Infeed (Four-Circuit Pre-wired) Provides power from fixed floor or wall sources to table distribution system on level four and five only. Select height to match leg height. Example: 27", 29" or 42" Must be ordered for Levels 4 and 5 8-Wire WZ-PI-27 5# 8-Wire WZ-PI-29 5# 8-Wire WZ-PI-42 6# 10-Wire WZ-T6PI-27 5# 10-Wire WZ-T6PI-29 5# 10-Wire WZ-T6PI-42 6# Duplex Receptacle Convenience circuits share a neutral and ground wire Must be ordered for Levels 4 and 5 Black only Dedicated Receptacle Dedicated circuit has its own neutral and ground Orange only Must be ordered for Levels 4 and 5 Table-to-Table Connector Connects power system of two adjoining tables 18" long Includes steel wireway and splice plate Must be ordered for Levels 4 and 5 Power Module 8-Wire WZ-RECP-1.2# 8-Wire WZ-RECP-2.2# 8-Wire WZ-RECP-3.2# 10-Wire WZ-T6RECP-1.2# 10-Wire WZ-T6RECP-2.2# 10-Wire WZ-T6RECP-3.2# 8-Wire WZ-RECP-4I.2# 10-Wire WZ-T6RECP-4l.2# 10-Wire WZ-T6RECP-5l.2# 10-Wire WZ-T6RECP-6l.2# 8-Wire WZ-SC18.5# 10-Wire WZ-T6SC18.5# PWR-022 PWR-036 PWR-108 PWR-180 A B HOW TO ORDER HOW TO BUILD A MODEL NUMBER INFORMATION Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. A B Select basic model. Select trim color. Floor Infeed (Four-Circuit Pre-wired) Two 90 connectors. Flexible steel conduit with eight 12-gauge conductors in the leg. Includes steel trim plate with dual holes for electrical and data entry. Receptacle Requirements Width No. of Duplex Receptacles

69 FLEXSTATION with Power Up Electrical LIST PRICES Electrical $ SPECIAL SERVICES List Prices For dock delivery add 5%. For installation add an additional 8%. 67

70 General Notes Information INTERFACE Flexstation Notes Showroom and Business Office 3099 East Washington Avenue Madison, Wisconsin TEL: FAX: TOLL FREE: Web Site: