VG7000 DN , PN16 DN DN DN DN DN DN
|
|
|
- Fay Jefferson
- 5 years ago
- Views:
Transcription
1 Virtual ranch ecatalogue click here DN , PN16 HVAC control products series bronze control valves are designed primarily to regulate the flow of water and steam in response to the demand of a controller in Heating, Ventilating and Air Conditioning (HVAC) systems. These valves are available in Push-Down-To-Close (PDTC), Push-Down-To-Open (PDTO), and three-way mixing configurations. oth electric and pneumatic actuators are available for factory or field mounting. Features ffdn15 through DN50 bronze valves, in two-way PDTC, PDTO and three-way mixing configurations ffwide range of electric actuators available for all valves ffevery valve tested for tight shutoff ffuses Standard Johnson Controls U-cup Packing ffflexible features-and-options ordering template ffstandard bonnet and stem design ffleakage - rass trim: 0.01% of maximum flow - Stainless steel trim: 0.05% of maximum flow ffinherent flow characteristics Equal percentage: 2-way valves Linear: 3-way valves ffrangeability 25:1 at K VS and 100:1 at K VS ffmaximum recommended operating pressure drop 240 kpa for DN15 and DN kpa for DN40 to DN50 fffluid temperature operating limits with brass trim: - With V-3801 and VA-731x Actuators: 2 C to 120 C water / 100 kpa Saturated Steam - With all other actuators: 2 C to 140 C water / 260 kpa Saturated Steam - with stainless steel trim: 2 to 170 C / 690 kpa Saturated Steam Dimensions in mm A A ody size A 2-way PDTC 2-way PDTO 3-way DN DN DN DN DN DN
2 Ordering codes for valve bodies VG7 T S Stem type Standard threaded stem Slotted stem and small bonnet (for VA-7310 electric and V-3801 pneumatic actuators only, only available for DN15 and DN20 valves with brass trim) Size Flow coefficient K VS A DN DN C DN D DN E DN F DN G DN L DN N DN25 10 P DN32 16 R DN40 25 S DN50 40 ody configuration Trim type Inherent flow characteristics 1 2-way rass trim Equal percentage 2 3-way mixing rass trim Linear in both ports 3 2-way Stainless steel trim Equal percentage 4 3-way mixing Stainless steel trim Linear in both ports 5 3-way mixing rass trim Equal percentage in control port, linear in bypass port (only available for VG7x1... valves with SPP male connection) End connection 0 SP Parallel Female Threaded 1 SP Parallel Male Threaded (only DN15 and DN20, with rass Trim) ody configuration 2 2-way PDTC (Normally Open) 4 2-way PDTO (Normally Closed) 8 3-way Mixing 9
3 Maximum close-off pressures (in kpa), for valves with brass trim and electric actuators Size VA-731x VA-715x VA-77xx VA-720x VA78xx DN DN DN DN DN DN DN DN Maximum close-off pressures (in kpa), for valves with stainless steel trim and electric actuators Size VA-731x VA-715x VA-77xx VA-720x VA78xx DN DN DN DN DN DN DN DN
4 Maximum close-off pressures (in kpa), for valves with brass trim and pneumatic actuators Actuator V-3801 size 2-way PDTC or 3-way valves with 138 kpa air supply Spring range kpa * 2-way PDTO or 3-way valves with 0 kpa air supply 21 to to to to 91 DN DN DN DN DN DN DN V-3000 DN DN DN DN DN DN V-400 DN DN DN
5 Maximum close-off pressures (in kpa), for valves with stainless steel trim and pneumatic actuators Actuator V-3000 V-400 size 2-way PDTC or 3-way valves with 138 kpa air supply Spring range kpa * 2-way PDTO or 3-way valves with 0 kpa air supply 21 to to to to 91 DN DN DN DN DN DN DN DN DN DN DN DN DN DN Note * The recommended spring ranges for use with a V-9502 Positioner are: 21 to 42 kpa for PDTC valves, 63 to 91 kpa for PDTO valves and 63 to 91 kpa for three way valves. 12
VG7000 Female Threaded Cast Bronze Valve Series with Electric Actuators
VG7000 Female Threaded Cast Bronze Valve Series Electric Actuators Product Bulletin PB_VG7000 Electric Issue Date 02 2009 The VG7000 Series electrically operated cast bronze valves female threaded fittings
VG7000 Series Bronze Control Valves
VG7000 Series Bronze Control Valves Installation Instructions VG7000 Part No. 14-1078-6, Rev. E Issued June 16, 2008 Supersedes August 12, 2002 Applications VG7000 Series Bronze Control Valves are primarily
VG4000 Series VG4000 Electric Zone Valves
VG4000 Series VG4000 Electric Zone Valves VG4000 Electric Zone Valves VG4000 Series High-Capacity/High-Closeoff Electric Zone Valves are designed to regulate the flow of water in response to the demand
VG9000 Flanged Valves
VG9000 Flanged Valves DN15..., PN6 and PN10 Product Bulletin This improved VG9000 Series cast iron flanged valves are designed primarily to regulate the flow of water and low pressure steam in response
VG7000 Series Bronze Control Valves
FANs 977, 125, 1628.3 Product/Technical Bulletin VG7000 Issue Date 0301 VG7000 Series Bronze Control Valves VG7000 Series Bronze Control Valves are designed primarily to regulate the flow of water and
VG7000 Series Bronze Control Valves
VG7000 Series Bronze Control Valves Product Bulletin VG7000 Series Code No. LIT-977140 Issued June 16, 2008 Supersedes March 2001 VG7000 Series Bronze Control Valves are designed primarily to regulate
VG8000N Series PN16, DN15 - DN150
VG8000N Series PN16, DN15 - DN150 Nodular Iron Flanged Valves Product Bulletin These electrically and pneumatically operated flanged valves are primarily designed to regulate the flow of water and steam
Technical Data Sheet for VG7000 Series Bronze Control Valves
Issue Date 0299 Technical Data Sheet for VG7000 Series Bronze Control Valves 1-1/2 (38) 2-11/16 (68) 1-1/2 (38) 2-11/16 (68) 25/32 (20) 1-17/32 (39) Figure 1: 1/2 in. Normally Open Union Globe VG7000 Series
VBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN40 TO DN50)
VGx-xx-xx Externally Threaded Control all Valves PN25 ( TO DN50) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to VDI2035
VG2000 Series Cast Iron Flanged Globe Valves
Product Bulletin VG2000 Issue Date March 4, 2003 VG2000 Series Cast Iron Flanged Globe Valves VG2000 Series Cast Iron Flanged Globe Valves are designed primarily to regulate the flow of water and steam
3-Port Seat Valves with Male Thread, PN 16
4 463 3-Port Seat Valves with Male Thread, PN 16 VXG41 Use Media Bronze CC491K (Rg5) valve body DN 15DN 50 k vs 1640 m 3 /h Flat sealing connections with external thread G B to ISO 228/1 Sets of ALG 3
VG6000 Series Forged Brass Valves
VG6000 Series Forged Brass Valves Product Bulletin PB_VG6000 Issue Date 04 2008 The VG6000 forged brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller
3-port seat valves PN16 with flanged connection
4 430 Acvatix 3-port seat valves PN16 with flanged connection VXF40.. Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 1.9 315 m 3 /h Can be equipped with SQX.. electromotoric or SKD..-, SK..- and SKC..-
VG2000 Series Cast Iron Flanged Globe Valves
Product Bulletin VG2000 Issue Date September 6, 2007 Supersedes March 4, 2003 VG2000 Series Cast Iron Flanged Globe Valves VG2000 Series Cast Iron Flanged Globe Valves are designed primarily to regulate
3-Port Seat Valves with Flange, PN 6
4 410 3-Port Seat Valves with Flange, PN 6 VXF21... Grey cast iron EN-GJL-250 valve body DN 25... k vs 1.9...160 m 3 /h Can be equipped with SQX... electromotoric or SKD...-, SK...- and SKC...- electrohydraulic
3-Port Seat Valves with Flange, PN 10
4 420 3-Port Seat Valves with Flange, PN 10 VXF31... Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 2.5 315 m 3 /h Can be equipped with SQX... electromotoric or SKD...-, SK...- and SKC...- electrohydraulic
VG2000 Series Electric Cast Iron Flanged Globe Valves
VG2000 Series Electric Cast Iron Flanged Globe Valves Code No. LIT-1900097 Issued January 2, 2014 Description VG2000 Series Electric Cast Iron Flanged Globe Valves are designed primarily to regulate the
VG2000 Series Cast Iron Flanged Globe Valves
Installation Instructions VG2000 Issue ate November 15, 2002 VG2000 Series ast Iron Flanged Globe Valves pplication VG2000 Series ast Iron Flanged Globe Valves are primarily designed to regulate the flow
Distributed By: M&M Control Service, Inc
Control Valves DESIGN & OPERATION Description A control valve is a device capable of modulating flow at varying degrees between minimal flow and full capacity in response to a signal from an external control
I ntroduction. VA-7450 Electronic Terminal Unit Valve Actuator. Features and Benefits
European Electronic Controls Catalogue Catalogue Section E Product Bulletin VA-7450 Issue Date 199 VA-7450 Electronic Terminal Unit Valve I ntroduction The VA-7450 Series provides floating or proportional
M x Series Cast Iron Flanged Valve Linkage Kit for M9000 Series Electric Actuators
Product Bulletin 53x Series Issue Date April 4, 2014 Supersedes June 19, 2007 53x Series Cast Iron Flanged Linkage Kit for M9000 Series Electric s The 53x Series Cast Iron Flanged Linkage Kits are designed
VA-8020 Floating Valve Actuator
FANs 977, 1628.3 Product/Technical Bulletin VA-8020 Issue Date 0300 VA-8020 Floating Valve Actuator The VA-8020 synchronous motor-driven actuator provides floating (three wire) control of valves with up
AV-8020 Series Floating Control Actuated Valve
FANs 977, 1628.3 Product/Technical Bulletin AV-8020 Issue Date 0300 AV-8020 Series Floating Control Actuated Valve The AV-8020 is an electric actuator/brass valve combination that furnishes floating control
3-Port Seat Valves with Male Thread, PN 16
6 3-Port Seat Valves with Male Thread, PN 6 VXG ronze CC9K (Rg5) valve body DN 5DN 0 k vs 02525 m 3 /h Flat sealing connections with external thread G to ISO 228/ Sets of ALG 3 screwed fittings with threaded
3-port seat valves PN10 with flanged connection
4 420 cvatix 3-port seat valves PN10 with flanged connection VXF31.. Grey cast iron EN-GJL-250 valve body DN 15 150 k vs 2.5 315 m 3 /h Can be equipped with SX..-electromotoric or SKD..-, SK..- and SKC..-
Two-port seat valves with male thread, PN16
4 363 Two-port seat valves with male thread, PN6 VVG4... Two-port seat valves with male thread, PN6 Bronze Rg5 DN5... DN50 mm (½"... 2") k vs 0.63... 40 m 3 /h Stroke 20 mm Can be equipped with actuators
Flare Valves 1/2 inch 2-Way and 3-Way
Valve and Actuator Manual 977 Valve Product Information Section Product Bulletin VTF Series Issue Date 0596 Flare Valves 1/2 inch 2-Way and 3-Way The 1/2 inch flared valve line is designed to accurately
V5000. Globe Valves Series for Terminal Units. Product Bulletin
V5000 Globe Valves Series for Terminal Units Product Bulletin The V5000 Valve Series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal unit
3-port seat valves PN6 with flanged connection
4 410 cvatix 3-port seat valves PN6 with flanged connection VXF21.. Grey cast iron EN-GJL-250 valve body DN 25...100 k vs 1.9...160 m 3 /h Can be equipped with SQX.. electromotoric or SKD..-, SK..- and
Features Globe Valve 2-Way & 3-Way Assembly Features:
Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot
3-port seat valves, external thread, PN16
4 464 3-port seat valves, external thread, PN6 VXG44.. ronze CC49K (Rg5) valve body DN 5..DN 40 k vs 0.25..25 m 3 /h Flat sealing connections with external thread G to ISO 228- Sets of ALG..3 screwed fittings
STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
VG6000. Globe Valves Series for Terminal Units. Product Bulletin
VG6000 Globe Valves Series for Terminal Units Product ulletin The VG6000 forged brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone
V5049A FLANGED LINEAR VALVE PN25/40
V549A FLANGED LINEAR VALVE PN25/4 FEATURES SPECIFICATION DATA Cast iron or cast steel body with flanged end connections Low seat leakage rate Metal-to-metal seating for long life span Self-adjusting packing
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Technical Instructions Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work
3-port seat valves PN16 with flanged connection
4 440 Acvatix 3-port seat valves PN16 with flanged connection VXF41.. Grey cast iron EN-GJL-250 valve body DN 15...150 k vs 1,9...300 m 3 /h Can be equipped with SAX..-electromotoric or SKD..-, SK..- and
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to work with either a
VT Series Terminal Unit Valves 1/2 inch, 2-Way and 3-Way ANSI Class 250 Body Rating
FANs 977, 125, 1628. Product Bulletin VT Issue Date 0596 VT Series Terminal Unit Valves 1/2 inch, 2-Way and -Way ANSI Class 250 Body Rating The VT Series Terminal Unit Valves are designed to accurately
VG2000 Series Cast Iron Flanged Globe Valves for Assembly in the Field
Code No. LIT-1900064 Issued January 2, 2014 VG2000 Series Cast Iron Flanged Globe Valves for Assembly in the Field Description VG2000 Series Cast Iron Flanged Globe Valves are designed primarily to regulate
SELECTION. Easily Selectable Easily Serviceable. Interchangeability as easy as 1-2-3
SELETION Terminal Unit Zone Valve 1 Select your valve body Female Thread Solder ouble Union 2 Select your cartridge type hoice of V Hot and hilled Water 50% Glycol Low Pressure Steam Pressure alanced Male
Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic or electronic
3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Three-Way s 1/2 to 2-inch Bronze Body Technical Instructions Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to
Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
PRODUCT NO. MODEL LANDIS & STAEFA ASSEMBLED IN U.S.A. Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Cv VF186R1 Description The Flowrite VF 599 Series
3-port valves vxf42..
Air Comfort Air treatment 99 G.0.0 -port valves vxf.. with flanged connections, pn STAZ- and stz-» eq DATASHEETS -port valves VXf.. In boiler, district heating and refrigeration plants, cooling towers,
V5050A,B FLANGED LINEAR VALVE PN16 AND PN25/40
V55A,B FLANGED LINEAR VALVE PN16 AND PN25/4 GENERAL These three-port mixing s are used for modulating control of hot/chilled water or steam in heating, ventilation, and air conditioning systems and can
M x Cast Iron Flanged Valve Linkage Kit for Mounting a Single M9000 Series Electric Actuator
Installation Instructions Issue Date June 15, 2007 Supersedes November 15, 2002 M9000-53x Cast Iron Flanged Valve Linkage Kit for Mounting a Single M9000 Series Electric Actuator Installation Parts Included
BRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE
FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.
Flowrite 599 Series. Technical Bulletin. 1/2 to 2-Inch Valve (2-Way & 3-Way) and Actuator Assembly Selection. Document No.
rite 599 Series 1/2 to 2-Inch (2-Way & 3-Way) and Actuator Assembly Selection Bulletin TB 255 How to Use the Selection Graphs How To Use The Tables This Bulletin will aid in selecting a 1/2-inch to 2-inch
In district heating, heating, ventilating, and air conditioning systems as DFRQWUROYDOYH
7KUHHSRUWYDOYHV ZLWKIODQJH3 7KUHHSRUWYDOYHVZLWKIODQJH3 &DQEHXVHGDVPL[LQJRUGLYHUWLQJYDOYHV *UH\FDVWLURQ** 'PP N YV P K 6WURNHRUPP &DQEHHTXLSSHGZLWKDFWXDWRUV64;6.'6.%DQG6.& 8VH In district heating, heating,
Powermite 599 MT Series Terminal Unit Valve and Actuator Assembly Selection
Document No. 155-306P25 TB 251 Powermite 599 MT Series Terminal Unit and Actuator Selection Description This Technical Bulletin aids in selecting a Powermite 599 Series MT Series terminal unit valve and
T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
Mounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve
Electric Control Valves Types 3226/5857, 3226/5824, 3226/5825, 3226/5757-7, 3226/5724-8, 3226/5725-7, 3226/5725-8 Pneumatic Control Valve Type 3226/2780 Type 3226/5857 Type 3226/5757-7 Type 3226/2780-2,
2-Port Seat Valves with Flange, PN 25
4 7 2-Port Seat Valves with Flange, PN 25 VVF52... Nodular cast iron EN-GJS-400-8-LT valve body DN 5...40 k vs 0.6...25 m /h Can be equipped with SQX- electromotoric or SKD...- or SKB...- electrohydraulic
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
M x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators
Issue Date June 15, 2007 Supersedes November 15, 2002 M9000-53x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators Installation Parts Included Linkage Stem
3-port seat valves PN40 with flanged connection
4 482 DN 15 and DN 25 DN 40 150 Acvatix 3-port seat valves PN40 with flanged connection VXF61.. Cast steel GP240GH valve body DN 15...150 k vs 1.9...300 m 3 /h Can be equipped with SKD.., SK.. and SKC..
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
VE VVG Series Electronic Two-way Valves Normally Closed
VE VVG Series Electronic Two-way s Normally Closed Document No. 155-112P25 VE VVG-1 Description The VE VVG electronic two-way valves control the flow of water or glycol solutions. The electronic actuator
M Ball Valve Linkage Kit
M9000-551 Ball Valve Linkage Kit Installation Instructions Part No. 34-636-1816, Rev. B Issued July 6, 2011 Supersedes February 7, 2006 Applications The M9000-551 Ball Valve Linkage Kit (Figure 1) is designed
Valve Series V2001 Three-way Valve Type 3323
Valve Series V2001 Three-way Valve Type 3323 Fig. 1 Type 3323 Valve with mounted rod-type yoke (partial view) Edition January 1999 Mounting and operating instructions E 8113/8114 EN 1. Design and principle
VG1000 Series Flanged Ball Valves Catalog Page
VG1000 Series Flanged Ball s Catalog Page Code No. LIT-1900418 Issued October 2017 Description The VG1000 Series Flanged Ball s are primarily designed to regulate the flow of hot water, chilled water,
V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell
V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low
MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD
MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and
Ball valve and actuator. Maximum control precision for a wide variety of applications.
Ball valve and actuator. Maximum control precision for a wide variety of applications. VKR two-way and BKR three-way ball valves from SAUTER. Perfect technology for a wide range of applications. 0 90 80
Series 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
Powermite 599 MT Series Terminal Unit Valve and Actuator Assembly Selection
Document No. 155-36P25 TB 251 August 9, 212 Powermite 599 MT Series Terminal Unit and Actuator Assembly Selection Description This Technical Bulletin aids in selecting a Powermite 599 Series MT Series
Maxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal
Powers Controls Powertop Two-Way Valves Normally Open
Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless
VA-7450 Series. Electric Valve Actuators
34-636- 771, Rev. D Installation Instructions VA-7450 Series Issue Date 0216 VA-7450 Series Electric Valve Actuators Applications VA-7450 Series Electric Valve Actuators provide on/off, floating, or proportional
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
V5050A,B FLANGED LINEAR VALVE PN16 AND PN25/40
V55A,B FLANGED LINEAR VALVE PN16 AND PN25/4 GENERAL These threeport mixing valves are used for modulating control of hot/chilled water or steam in heating, ventilation, and air conditioning systems and
Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25)
Data sheet Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25) Description Controller closes on rising temperature. The controllers are: - Type-tested acc. to EN 14597
2 - way valve (NO), pressure relieved (PN 25) VG - external thread VGF - flange
Data sheet 2 - way valve (NO), pressure relieved (PN 25) VG - external thread VGF - flange Description VG and VGF are pressure relieved 2-way normally open (NO) valves, designed to be combined with: -
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
M x Series Valve Linkage Kits
Installation Instructions M9000-51x Issue Date 05/01/02 M9000-51x Series Valve Linkage Kits Installation Parts Included Quantity Description 1* Actuator Mounting Bracket 1* Adjustable Anti-Rotation Slider
VG1000 Series Forged Brass Ball Valves
Product Bulletin VG1000 Issue Date 04 2005 VG1000 Series Forged Brass Ball Valves VG1000 Series Ball Valves are designed to regulate the flow of hot or chilled water and low-pressure steam in response
Zone Valves and Parts (Honeywell)
28/11/14 B49 Zone Valves - Two Way Fan Coil Zone Valves and Parts (Honeywell) Two-way Fan Coil Valve, the VU53 high pressure zone valves are used to control the flow of hot or chilled water in commercial
BCV Blowdown Control Valves DN15 to DN50 (½" to 2")
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
VP1000. Pressure independent valves. HVAC control products Valves DN , PN25 DN , PN16. Ordering codes
Virtual ranch eatalogue click here N15...32, PN25 N40...50, PN16 HV control products pressure independent control valve is a combination of a differential pressure regulator and a regulating valve for
January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell
786.89 January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL 8900 Previously manufactured by Dezurik and Honeywell Description: The Nor East Series 8600 (mixing) and Series 8900 (diverting) cage
Direct or Reverse-Acting?
Control Valves Use of Positioners Minimize the effects of friction & hysteresis / reduce dead band. Increase differential pressure capability. Permit split range operation / high rangeability in slow response
Temperature Regulators
Temperature Regulators DESIGN & OPERATION DIAL THERMOMETER (Model 91400 only) BELLOWS OVERRANGE PROTECTION SPRING CAPILLARY TUBING CONNECTION SENSING BULB RANGE ADJUSTMENT SPRING CAP ADJUSTMENT SCREW BUSHING
VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves
Product ulletin VG000 Issue ate 11/01/01 VG000 Series High-apacity/High-loseoff Electric Zone Valves VG000 Series High-apacity/High-loseoff Electric Zone Valves are designed to regulate the flow of water
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
2-Port Seat Valves with Flange, PN 25
OEM 2-Port Seat Valves with Flange, PN 25 VVF52...E Spheroidal cast iron EN-GJS-400-8-LT valve body DN 5...40 k vs 0.63 25 m 3 /h Can be equipped with SQX E- motoric or SKD E- or SKB - electrohydraulic
DG Series Flanged Globe Valves
G Series Globe Valves provide stable and accurate control of both water, 50/50 water Glycol solutions and steam heat exchangers on fan coil units, VAV reheat coils, and air handling units up to 900 GPM.
Product bulletin for: ST2 Ball valves with two-way and three-way BSPP threaded fittings
Product bulletin for: ST2 Ball valves with two-way and three-way BSPP threaded fittings ST2 Ball valves in conjunction with spring return and non-spring return VA-Actuators Developed for HVAC applications
VZ*19* VZ219E, VZ319E, VZ419E VZ219C, VZ319C, VZ419C
VZ219E, VZ319E, VZ419E VZ219C, VZ319C, VZ419C SPECIFICATIONS Design PN16, Two-way, Three-way and Three-way with bypass (Linear operation) Function.... Normally Closed (A-AB). [Without actuator fitted]
SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
PNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
KOMBAT K1 Pneumatic Control Valve
Applications Bottle Washing Induction Furnaces Machinery Industrial Compressors Steam Tables Cold Storage Boxes Plating Tanks Cooling Ducts Heating Ducts Engine Jacket Cooling Fuel Oil Heaters Liquid Chillers
CONTROL EQUIPMENT STAZ-16, STBZ-16
CONTROL EQUIPMENT STZ-16, STZ-16 INSTLLTION & MINTENNCE 3-PORT SET VLVES VXF31 Used as a control valve for mixing and distribution of heating, ventilation and air conditioning systems. Only for closed
Series 240 and 250 Valves with perforated plug
Series 240 and 250 Valves with perforated plug DIN and ANSI versions Application Optimized trim for critical conditions in applications DN 25 to 500 NPS 1 to 20 Nominal pressure PN 16 to 400 Class 150
2-port and 3-port valves with T-bypass PN 16
4 854 2-port valves 3-port valve with T-bypass CVTIX 2-port and 3-port valves with T-bypass PN 16 VVP45..S VMP45..S ronze CC499K valve body DN 10 and DN 15 k vs 0.63 2.5 m 3 /h Externally threaded connections