Direct or Reverse-Acting?

Size: px
Start display at page:

Download "Direct or Reverse-Acting?"

Transcription

1 Control Valves

2 Use of Positioners Minimize the effects of friction & hysteresis / reduce dead band. Increase differential pressure capability. Permit split range operation / high rangeability in slow response loops. Convert a linear flow characteristic to equal percentage (smart). Can have integral I/P transducers.

3 Direct or Reverse-Acting? DIRECT-ACTING: shaft goes down when command signal increases. Valve closes and flow decreases REVERSE-ACTING: shaft goes up when command signal increases. Valve opens and flow increases

4 Sliding Gate Control Valves MK70/711: Linear MK701/702: Hi Flow MK707: =% MK74: Bellows MK75: Wafer MK76: On/Off MK79: 3-Way

5 Mark 70 Series Linear pneumatic control valves with sliding gate seats and multi-spring actuators. 1/4 to 6 sizes Threaded and flanged ends Compact size: about 2/3 the size and weight as compared to competition Stem packing is four times deeper than stem travel

6 Jordan MK70/711 vs. Fisher ED Pricing Size MK70/711 THRD DI Jordan + / - Fisher Fisher ED CI THRD MK70/711 FLG DI Jordan + / - Fisher Fisher ED CI FL 125# 1" $1, % $ $1, % $ /2" $1, % $1, $1, % $1, " $1, % $1, $1, % $1, /2" $3, % $2, " $3, % $2, " $4, % $3, " $6, % $5, *** Fisher pricing estimated ***

7 MK707 Equal percentage sliding gate control valves with multi-spring actuators. 1/2 to 6 sizes Threaded and flanged ends Class IV shutoff Ductile iron, bronze, carbon steel, stainless steel bodies

8 Mark 74 Bellows Stem Seal Controls fugitive emissions while reducing the risks associated with toxic, corrosive, explosive and high temperature fluids. Long bellows life -- in lab tests, exceeded 2 Million cycles with no bellows failures Fully packed back-up seal Detection/monitoring port 1/4 through 2 sizes

9 Mark 76 On/Off Control Valve A low profile, lightweight control valve for on/off service. In testing, the MK76 has exceeded 10 Million cycles with no visible wear on the diaphragm. Sizes to ½ - 6

10 Mark 79 Three Way Valve Features a 3-way body for use on diverting service as a bypass valve or for combining fluids as a mixing valve 1-1/2, 2 & 3 sizes Threaded or flanged ends CS or SS

11 Sliding Gate Control Valves MK70/711 Ideal for general duty MK701/702 high capacity, high turndown MK707 =% delivers high turndown Up to 100:1 or more MK74 short stroke, very long bellows life tested to 2,000,000 partial stroke cycles MK76 Ultracompact, extremely fast, tested to over 10 million cycles

12 MK75 Wafer Design MK75 Wafer Design 1-8 CS, S6, Exotic Alloys ANSI 300 Dramatic Weight Reduction Super-compact design Wafer-design virtually eliminate body wear issues Steam Flashing Cavitation

13 Max Cv 1" 1-1/2" 2" 2-1/2" 3" 4" 6" 8" Jordan MK Jordan MK Jordan MK Jordan V1C Fisher ED** S&S 8020 GS3*** Jordan MK *largest available linear Cv **100% Open Capacity ***Modified linear is only available

14 Weight (Pounds) 1" 1-1/2" 2" 2-1/2" 3" 4" 6" 8" Jordan MK70* Jordan MK711* Jordan MK78* Jordan V1C* Fisher ED** S&S 8020 GS3* Jordan MK75* *weight is based on 300# version with largest actuator **weight is based on 300# version with smallest actuator

15 CS Jordan MK75 vs. Fisher ED Pricing Size MK75 CS % of Fisher Fisher ED WCC 150# 1" $1, % $1, /2" $2, % $2, " $2, % $2, /2" $2, % $3, " $2, % $3, " $3, % $5, " $4, % $8, *** Fisher pricing estimated ***

16 SS Jordan MK75 vs. Fisher ED Pricing Size MK75 SS % of Fisher Fisher ED SS FL 150# 1" $2, % $2, /2" $2, % $3, " $2, % $4, /2" $2, % $6, " $3, % $7, " $4, % $11, " $5, % $18, *** Fisher pricing estimated ***

17 MK75 Advantages Less material Less machining Lower shipping costs Faster, easier installation lowers costs Flashing caustic application

18 8 MK75 Actuator Case: 85M Epoxy coated steel Packing Materials: Spring Loaded Teflon V-Ring, Grafoil above 500F Ratings: Stainless Steel 100F and 550F Carbon Steel 100F and 550F Flow Capacity: 600Cv Linear or Equal Percentage (determined by positioner) Maximum Pressure Drop: 250 psi With 85M Actuator, 12-20psi bench set w/mk16iq

19 Equal Percentage Seats Now Available on every size MK75 Programmable via the MK16IQ positioner at 100% of linear Cv Actual seats available at 65% of maximum linear Cv Can be field converted from linear to =% by plate change only

20 Globe Style Control Valves MK78 V1C

21 MK78 - Control Valve ½ -4 (DN15-100) 3-4 V1S design BR, CS, S6 body ANSI Class 300 Ratings, Class 600 for 3-4 ANSI Class VI Shutoff w/soft seat Top entry cage allows inline maintenance

22 V1C - Control Valve 1-6 (DN25-100) CS, S6 body ANSI Class 150/300/600 ANSI Class VI Shutoff with soft seat High ΔP Ratings Trim/Bonnet Options

23 Accessories Positioners I/Ps

24 MK16IQ Siemens PS2 Smart Positioner Easily Configurable with Autotune Capability Low Air Consumption and Fast Responding Available with Hart, Profibus, and Foundation Fieldbus (Advanced Diagnostics)

25 MK16 Foxboro/Eckardt Pnuematic SRP981 Eltro-Pnuematic SRI986 X-Proof SRI983 Independent adjustment of zero and span Signal range 3 to 15psig Stroke 0.3 to 4.0 in, extended stroke range on request Supply air pressure up to 90 psig

26 MK15 Top Mount Positioner Siemens/Moore #73N Input Range 3-15, 3-9, 9-15, 6-30, 3-27 psig Valve Travel Minimum: 1/4" Maximum: 4" Supply Pressure Minimum: 3 psi above required actuator pressure Maximum: 100 psig Temp Limits -40F 180F

27 I/P Bellofram Type 1000 Built-in Volume Booster Small Size & Light Weight Field Reversible Low Air consumption Convenient External Span & Zero Adjusts (Except for X-Proof Models) Wide Supply Pressure Range Low Supply Pressure Sensitivity

Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES

Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced

More information

Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.

Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series. 3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of

More information

Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.

Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series. 3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of

More information

Mark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage

Mark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding

More information

Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON

Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing

More information

Control Valves & Regulators

Control Valves & Regulators Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many

More information

Mark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage

Mark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage Mark 75HW Series Wafer Style Hand Operated Valves The Mark 75HW is a manually operated, sliding gate control valve. The wafer style body provides great value for the end user while offering all of the

More information

Mark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features

Mark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features Mark 37/377 Series Final Control Element The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan s sliding gate

More information

Mark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available

Mark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available Mark 78 Series Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications,

More information

Mark 75PTP Series JORDANVALVE. Piston Operated Wafer Style Control Valves. CRN Registration Number Available

Mark 75PTP Series JORDANVALVE. Piston Operated Wafer Style Control Valves. CRN Registration Number Available Mark 75PTP Series CRN Registration Number Available Piston Operated Wafer Style Control Valves The Mark 75PTP is a Mark 75 wafer style control valve with an 80mm (1" - 2"} Stainless Steel Piston Actuator.

More information

Jordan Control Valve Series

Jordan Control Valve Series Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced

More information

V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features

V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim

More information

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...

More information

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...

More information

www.sullivanandsons.com Engineering Services Sullivan and Sons, Inc., offers a wide range of engineering services. Our expertise can help you through each stage, including conception, design, construction,

More information

INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance

INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe

More information

Python Series Control Valves

Python Series Control Valves Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases

More information

Jordan Control Valve Series

Jordan Control Valve Series Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates

More information

DBOY Series Pneumatic Control Valve

DBOY Series Pneumatic Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

700 Series Anti-corrosion Control Valves

700 Series Anti-corrosion Control Valves 7 Series Anticorrosion Control Valves Specification Data CH92 11/97 Split Body PTFE Lined Control Valves for Corrosive Applications Table of Contents Foreword.................................................................

More information

Product Specification

Product Specification Product Specification Pnuematic Actuated Industrial Valves Compact Globe Control valves Two-Way, Linear, Steel or Stainless Steel Body Valves for Process and Utility Applications Series: 58OO Sizes: 1/2

More information

Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features

Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark

More information

CONTROL VALVES QUALITY, DEPENDABILITY, SERVICE. REPUTATION BUILT ON. Innovative Solutions

CONTROL VALVES QUALITY, DEPENDABILITY, SERVICE. REPUTATION BUILT ON. Innovative Solutions CONTROL VALVES REPUTATION BUILT ON QUALITY, DEPENDABILITY, SERVICE. www.cashco www.valtron.co.za com Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you

More information

High End Technology. Tight Shutoff. Reliability. Expertise you can trust. General Products

High End Technology. Tight Shutoff. Reliability. Expertise you can trust. General Products High End Technology Tight Shutoff Reliability Expertise you can trust General Products 210 Who are we? 248 MASCOT is a culmination of over one hundred years experience in the process control valve industry

More information

General Stem-Guided Control Valves

General Stem-Guided Control Valves Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900

More information

Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.

Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators. Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds

More information

General Stem-Guided Control Valves

General Stem-Guided Control Valves Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900

More information

THE SLIDING GATE SEAT: A BETTER DESIGN

THE SLIDING GATE SEAT: A BETTER DESIGN PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept

More information

OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd

OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd REV. 04 04 14 OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd is by contract the exclusive import agent and service provider in South Africa for various foreign specialist manufacturers of FIELD PROCESS MEASURING

More information

THE SLIDING GATE SEAT: A BETTER DESIGN

THE SLIDING GATE SEAT: A BETTER DESIGN PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept

More information

708MV Series Motor Valve

708MV Series Motor Valve 708MV Series Motor Valve FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708MV offers several advantages including extreme accuracy, high turndown ratios and repeatability. The features

More information

PNEUMATIC ON OFF GLOBE VALVE

PNEUMATIC ON OFF GLOBE VALVE PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:

More information

Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator

Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator DIN version Application Compact control valve for the process industry Valve size DN 15 to 50 Pressure rating PN 16 to 40

More information

Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves

Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide

More information

CML Electric Actuator for Baumann Series

CML Electric Actuator for Baumann Series Electronic Actuators Product Bulletin CML Electric Actuator for Baumann 4000 Series CML-50 and CML-750 electronic modulating valve actuators feature state-of-the-art brushless DC motor technology to provide

More information

Control Valves for General Applications

Control Valves for General Applications Control Valves for General Applications 2 CCI s 8G/8H delivers superior control performance and reliability. The series 8 cage-guided valve is specially designed using recent advancements in control valve

More information

KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).

KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2 through 6 ( mm). Angle - 1/2 through 2 (15-50 mm). control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat

More information

Introduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control

Introduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control Introduction Globe and Angle Body Control Valves In Line Valve provides Solutions to Flow Control In Line Valve Globe Control Valves use the variable area generated between the plug and seat to control

More information

GE Oil & Gas. Becker * and Series V-0 Control Valves

GE Oil & Gas. Becker * and Series V-0 Control Valves GE Oil & Gas Becker * 35000 and 36000 Series V-0 Control Valves 2 Dresser GE s Becker V-0 Control Valve is a segmented type rotary control valve designed for mild duty natural gas regulation.the V-0 features

More information

3-WAY MIXING, BRONZE BODY

3-WAY MIXING, BRONZE BODY HEAVY DUTY BRONZE GLOBE CONTROL VALVES WM 3-WAY MIXING, BRONZE BODY 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2 Screwed NPT Ends ANSI Class 125 or 250 Body Rating ANSI Class IV Close off Bronze Trim with EP or Teflon

More information

SECTION Pressure & Temperature Control

SECTION Pressure & Temperature Control 16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air

More information

Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available

Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the

More information

Mountain States Engineering & Controls

Mountain States Engineering & Controls Mountain States Engineering & Controls 303-232-4100 www.mnteng.com RECIPROCATING CONTROL VALVES GLS The GLS Series is the work-horse of the reciprocating valve offering with a modern design that incorporates

More information

Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES

Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of

More information

Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features

Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure

More information

Fisher Sliding-Stem Valve Selection Guide

Fisher Sliding-Stem Valve Selection Guide Sliding-Stem Valve Selection Guide Product Bulletin Fisher Sliding-Stem Valve Selection Guide W8861 W7957-2 X0165 GX easy-e Typical Fisher Sliding-Stem Control Valves TBX STEAM CONDITIONING VALVE A broad

More information

Python Series Control Valves

Python Series Control Valves s When accurate control is desired from your steam or water applications the Armstrong Python 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control.

More information

58OO SERIES 5800 PRODUCT SPEC PNEUMATIC ACTUATED INDUSTRIAL VALVES COMPACT GLOBE CONTROL VALVES SIZES: 1/2 TO 4 INCHES PRODUCT SPECIFICATION

58OO SERIES 5800 PRODUCT SPEC PNEUMATIC ACTUATED INDUSTRIAL VALVES COMPACT GLOBE CONTROL VALVES SIZES: 1/2 TO 4 INCHES PRODUCT SPECIFICATION PNEUMATIC ACTUATED INDUSTRIAL VALVES COMPACT GLOBE CONTROL VALVES PRODUCT SPECIFICATION SERIES 58OO SIZES: 1/2 TO 4 INCHES 5800 PRODUCT SPEC Two-Way, Linear, Steel or Stainless Steel Body Valves for Process

More information

GLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION

GLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION GLOBE 3 WAY CONTROL VALVE SERIES - 130 INTRODUCTION Pneucon' 3 way control valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions

More information

Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available

Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA

More information

V-Notch Ball Valve. VFlo

V-Notch Ball Valve. VFlo V-Notch Ball Valve VFlo Spring Cylinder Actuators VFlo Control Valves Compact, field reversible actuator Bi-directional seal ANSI Class IV shutoff - metal seal ANSI Class VI shutoff - soft seal Lightweight,

More information

GATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION

GATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION GATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION CARBON STEEL,, HASTELLOY, CARPETER 20 MONEL, PVC, CAST IRON, DUCTILE IRON, TITANIUM, DUPLEX 3 PC FOUR

More information

Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve

Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal

More information

Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features

Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4- 1 Optional Features Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing

More information

Baumann TM. General Utility & Industrial Valves

Baumann TM. General Utility & Industrial Valves Baumann TM General Utility & Industrial Valves Baumann Products Experienced Leaders Providing Quality Industrial Control Solutions Since 1978 F isher Controls International LLC, Baumann Control Valves,

More information

High Pressure 2-way 2 1/2-6 Globe Valves

High Pressure 2-way 2 1/2-6 Globe Valves Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available

More information

Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

FlowPak TM General Application Valve DN , PN 10 / 40

FlowPak TM General Application Valve DN , PN 10 / 40 FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates

More information

708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available

708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available 708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional

More information

KOMBAT K1 Pneumatic Control Valve

KOMBAT K1 Pneumatic Control Valve Applications Bottle Washing Induction Furnaces Machinery Industrial Compressors Steam Tables Cold Storage Boxes Plating Tanks Cooling Ducts Heating Ducts Engine Jacket Cooling Fuel Oil Heaters Liquid Chillers

More information

21000 Series. Masoneilan * Valves. High-Performance Control Valves

21000 Series. Masoneilan * Valves. High-Performance Control Valves GE Energy Masoneilan * Valves 21000 Series High-Performance Control Valves Optimum control performance for a wide range of automated process control applications Single-ported design configuration Advanced

More information

Valtek MaxFlo Control Valves

Valtek MaxFlo Control Valves Control Valves Control Valves Rangeability up to 160:1 Hardened Eccentric rotary plug lifts off seat immediately, reducing seat wear Non-crossover shaft provides greater C V Heavy duty ridge metal seat

More information

Product Specification

Product Specification Product Specification Pnuematic Actuated Industrial Valves compact Globe control valves Two-Way and Three-Way, Linear, Iron Body Valves for Process and Utility Applications SerieS: 8 5 Size April 2008

More information

Mark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators.

Mark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators. Mark 89/89MX Series Three-Way Temperature Regulators The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and

More information

Series 2003 / Three-way control valve. Features. Wörth am Main

Series 2003 / Three-way control valve. Features. Wörth am Main Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they

More information

Top-Guided Single Seated Control Valves (Rating : ANSI 600 or Less)

Top-Guided Single Seated Control Valves (Rating : ANSI 600 or Less) No. SS2-8-0 Top-Guided Single Seated Control Valves (Rating : ANSI 0 or Less) OVERVIEW Model VST control valves are suitable for use in fluid with slurry because of its one side guiding construction. Guide

More information

eccentric disc control valve

eccentric disc control valve eccentric disc control valve INTRODUCTION The BXL control valve is a high performance eccentric disc rotary valve, developed for fluid control on industrial processes, that combine usually high BODY SUB-ASSEMBLY

More information

Every component precisely matched

Every component precisely matched Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,

More information

POSITIONERS and Controls for Complete Valve Automation

POSITIONERS and Controls for Complete Valve Automation CONTROLS A Division of AT Controls Pneumatic & Electro-Pneumatic POSITIONERS and Controls for Complete Valve Automation 1 SS SERIES SS Features Easy and quick auto-calibration Detecting RA (reverse acting)

More information

Specifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys

Specifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial

More information

Control Valve GS 3 series 1/2 up to 10. material

Control Valve GS 3 series 1/2 up to 10. material Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount

More information

DG Series Flanged Globe Valves

DG Series Flanged Globe Valves G Series Globe Valves provide stable and accurate control of both water, 50/50 water Glycol solutions and steam heat exchangers on fan coil units, VAV reheat coils, and air handling units up to 900 GPM.

More information

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either

More information

SMAR RIM CAGE GUIDED CONTROL VALVES. Always in control of flow. Previously manufactured by Dezurik and Honeywell

SMAR RIM CAGE GUIDED CONTROL VALVES. Always in control of flow. Previously manufactured by Dezurik and Honeywell SMAR RIM CAGE GUIDED CONTROL VALVES Always in control of flow. Previously manufactured by Dezurik and Honeywell CAGE GUIDED VALVES Cage guided valves are the industry standard for throttling control for

More information

Control Valve 8021 with integrated positioner

Control Valve 8021 with integrated positioner Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast

More information

Features...1. Modular Trim Designs... Cv Table...4. Custom Characterized and Packing...5. How to Specify Control Valve...6. Unbalanced Design...

Features...1. Modular Trim Designs... Cv Table...4. Custom Characterized and Packing...5. How to Specify Control Valve...6. Unbalanced Design... High Performance Control Valve PRODUCT DATA BULLETIN Table of Contents Features...1 Modular Trim Designs...... Cv Table..........4 Custom Characterized and Packing............5 How to Specify Control Valve...6

More information

Air Operated Valve Control Valve

Air Operated Valve Control Valve Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to

More information

Baumann Corrosion Resistant Control Valve

Baumann Corrosion Resistant Control Valve Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and

More information

Control valves with pneumatic actuators up to 350 C PN

Control valves with pneumatic actuators up to 350 C PN 300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for

More information

Distributed By: M&M Control Service, Inc

Distributed By: M&M Control Service, Inc Control Valves DESIGN & OPERATION Description A control valve is a device capable of modulating flow at varying degrees between minimal flow and full capacity in response to a signal from an external control

More information

Mark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS

Mark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a

More information

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port LEA, LFA and LLA Control Valves 1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

Fisher Rotary Valve Selection Guide

Fisher Rotary Valve Selection Guide Rotary Valve Selection Guide Product Bulletin Fisher Rotary Valve Selection Guide W6539 W9415 W9418-2 V260 VALVE Vee-Ball VALVE Control-Disk VALVE TYPICAL Fisher ROTARY VALVES Control-Disk Valve Expanded

More information

Fisher eplug complete Rotary Control Valve and Actuator Package

Fisher eplug complete Rotary Control Valve and Actuator Package Product Bulletin D103196X012 eplug complete Fisher eplug complete Rotary Control Valve and Actuator Package...your complete control valve solution... simple...easy to select and install reliable...engineered

More information

AEGIS RSS Series. Fully Lined Bellows Sealed Control Valves. RSS Series

AEGIS RSS Series. Fully Lined Bellows Sealed Control Valves. RSS Series Fully Lined Bellows Sealed Control Valves Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty Paraflon bellows Special designs for chlorine and high-purity media ASSOCIATE CHLORINE

More information

Series 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve

Series 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating

More information

Fisher Rotary Valve Selection Guide

Fisher Rotary Valve Selection Guide Rotary Valve Selection Guide Product Bulletin Fisher Rotary Valve Selection Guide W6539 X0187 W9418-3 X1243 PIPELINE BALL VALVE Vee-Ball VALVE Control-Disk VALVE METAL SEATED BALL VALVE TYPICAL Fisher

More information

Op-GL - Globe Control Valve

Op-GL - Globe Control Valve 325 Op-GL - Globe The simple, reliable rugged and economical globe valve A Globe control valve with superior performance Piston-cylinder actuator Easy disassembly, including removal of bonnet and bolts

More information

Pressure reducing valves

Pressure reducing valves Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for

More information

T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve

T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes

More information

SINGLESEAT BRONZEBODY

SINGLESEAT BRONZEBODY HEAVY DUTY BRONZEGLOBECONTROLVALVES SS SINGLESEAT BRONZEBODY 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2 Screwed NPT Ends ANSI Class 250 Body Rating ANSI Class IV Close off Hardened 17-4 Stainless Steel Trim Top

More information

Every component precisely matched

Every component precisely matched Series 9 Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,

More information

Series A angle pattern control valves

Series A angle pattern control valves Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern

More information

Control Valves Series 2000 Heavy Duty valve 2 way

Control Valves Series 2000 Heavy Duty valve 2 way Series 2000 Heavy Duty valve 2 way Technical data Size (DN) DN 15 150 Pressure rating PN16, PN40 ANSI 300 Connections Flanges UNI/DIN PN16, PN40 Flanges ANSI 300 Type sealing Metallic (Class IV - V), soft

More information

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell 786.89 January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL 8900 Previously manufactured by Dezurik and Honeywell Description: The Nor East Series 8600 (mixing) and Series 8900 (diverting) cage

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port KEA, KFA and KLA Control Valves 1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

Globe Control Valves

Globe Control Valves Globe Control Valves GLOBE CONTROL VALVES The modular, flexible option ABOUT GLOBE CONTROL VALVES The SPIRA-TROL and M-Series Globe Control valves are general purpose control valves that can be engineered

More information

Series 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability

Series 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability Series 60 New Smart Positioner Compact design Convenient & powerful function Enhanced reliability J Flow Controls, LLC 14 De Camp Cincinnati, OH 45216 Phone: 513-731-2900 Fax 513-731-6939 www.jflowcontrols.com

More information