TECHNICAL GUIDE SINGLE PIECE FAN COIL/AIR HANDLER FOR USE WITH SPLIT SYSTEM COOLING ONLY ELECTRIC OR HYDRONIC HEAT AND HEAT PUMPS

Transcription

1 TECHNICAL GUIDE SINGLE PIECE FAN COIL/AIR HANDLER FOR USE WITH SPLIT SYSTEM COOLING ONLY ELECTRIC OR HYDRONIC HEAT AND HEAT PUMPS MODELS: MSPS (PSC ) MSVT (Constant Torque ) MSVE (ECM ) SEE PAGE FOR MODEL NOMENCLATURE Due to continuous product improvements, these specifications are subject to change without notice. Visit us at (click Suntherm logo) For the most up to date technical information. MORTEX PRODUCTS, INC. Phone Fax DESCRIPTION: This fan coil/air handler provides the flexibility for installation in any upflow or horizontal application. These versatile models may be used for split system cooling or heat pump operation. Compact cabinets along with return air options in both the upflow and horizontal positions allow this unit to fit into tight spaces such as closets, attics, and crawl spaces. NOTE: These units are AHRI rated with most manufacturers condensing units, contact the point of purchase, or factory for certified performance ratings. FEATURES: CABINET-The cabinet is constructed of heavy gauge galvanized steel. Standard cabinets are pre-painted steel for the top, coil and blower doors, the cabinet wrapper is heave gauge embossed galvanized steel. Options are available for fully painted cabinets. The cabinet is insulated with 1 R-.5 insulation to prevent sweating and to improve efficiency. Units can be ordered to meet % air leakage codes where required. BLOWERS-Blowers are sized to both circulate air quietly and efficiently. All blower/motor combinations are fully factory tested in our labs to optimize air flow and power usage. Available motors include standard speed PSC type motors, 5 tap constant torque motors, and full variable speed Electronically Commutated s (ECM). COILS-Mortex Products, Inc. has manufactured its own coils for over 50 years. Using the latest in heat transfer technology, our rifled copper tube/aluminum fin coils produce high performance ratings and provide long lasting quality. All coils are pressure tested with nitrogen at 500 psig underwater. All copper coils are UL and ETL certified at 500 psig burst test pressure. All coils are fully tested in our own Psychometric environmental chambers. Contact factory for other tube and fin options. TXV S-Factory or field mounted, bolt on Thermostat Expansion Valves are available in either R- or R-10A. Our TXV s are all non-adjustable and have been optimized per Mortex specifications for performance and efficiency. ELECTRIC HEATERS- heaters are available from 5 to 0 KW with or without circuit breakers, NOTE: Circuit breakers are required per UL over 10 KW. heaters can be factory installed or provided as a field installed accessory. HYDRONIC HEAT-Optional hot water coils are available for all models. These coils are also manufactured at Mortex and are available in,, rows, see heating performance tables for further data. Form: MS (TG) Page 1.

2 Phone Fax UNIT NOMENCLATURE MS VE 6 15 B 86T AA I II III IV V VI VII I II III IV V VI VII Series: MS=Multi-position Single Piece US=Upflow Single Piece Type: PS=Standard PSC VT=Variable Speed Constant Torque VE=Variable ECM (Electronic Commutated ) Unit Size (Capacity In MBTUH): 1 Small Cabinet () 5 6 Medium Cabinet (5) 7 60 Large Cabinet (18) OS=No Cooling Small Cabinet () OM=No Cooling Medium Cabinet () OL=No Cooling Large Cabinet(18) Heating Configuration: 00=Cooling Only XX= Heating Capacity In KW P= Row HW Coil With Pump P= Row HW Coil With Pump P= Row HW Coil With Pump N= Row HW Coil No Pump N= Row HW Coil No Pump N= Row HW Coil No Pump Voltage: A=10v 1 Ph. 50/60 Hz. B=08/0v 1 Ph. 50/60 Hz. Contact Factory For Other Voltage Availability Evaporator Coil Configuration: 86T=DX Coil Geometry And Metering Device (Refer To Coil Nomenclature) 8KN=CW Coil Geometry (Refer To Coil Nomenclature) Option Code: AA= Standard Configuration Page. Form: MS (TG)

3 Phone Fax FIELD INSTALLED ELECTRIC HEAT KIT NOMENCLATURE I II III IV V B SE HK 05 B I TYPE B=Breaker S=No Breaker II SERIES SE=Small Cabinet ECM MSVE18, ME=Medium Cabinet ECM MSVE5,0,6 LE=Large Cabinet ECM MSVE7,,8,60 SX=Small Cabinet X-1 MSVT18, MX=Medium Cabinet X-1 MSVT5,0,6 LX=Large Cabinet X-1 MSVT7,,8,60 SP=Small Cabinet PDC MSPS18, MP=Medium Cabinet PSC MSPS5,0,6 LP=Large Cabinet PSC MSPS7,,8,60 III ACCESSORY HK= Heat Kit IV HEATING CAPACITY 0V/1PH. 05=5 KW 10=10KW 15=15KW 0=0KW V VOLTAGE B=08/0V 1PH 50/60HZ Form: MS (TG) Page.

4 Phone Fax DIMENSIONAL DATA COOL ONLY OR ELECTRIC HEAT DIMENSIONAL DATA MULTI-POSITION AIR HANDLER COOL ONLY OR ELECTRIC HEAT MODEL A B C D E F G H J K L M N P R MS**18, MS**0, MS--7,,8, Note: All Dimension Are Approximate. All Dimensions Are Rounded. Page. MS (TG)

5 Phone Fax DIMENSIONAL DATA HYDRONIC HEAT DIMENSIONAL DATA MULTI-POSITION AIR HANDLER HYDRONIC HEAT MODEL A B C D E F G H J MS**18, MS**0, MS--7,,8, MODEL K L M N P R S T U MS**18, MS**0, MS--7,,8, Note: All Dimension Are Approximate. All Dimensions Are Rounded MS (TG) Page 5.

6 Phone Fax Model Number MSVE18, MSVE18, MSVE5,0,6 MSVE5,0,6 MSVE7,,8,60 MSVE7,,8,60 Nominal Tons &.0 & BLOWER PERFORMANCE ECM-. MOTOR AIR FLOW Volts 1 Ph. Blower Jumper 50/60 Hz. Code Wheel 0.10" 0.0" 0.0" 0.0" 0.50" A VA 9 X 6 B C D A X7 B C D A VB 10 X 7 B C D A VH 10 X 7 B C D A VC 1 X 9 B C D A VI 1 X 9 B C D VG Model Number MSVE18, MSVE18, MSVE5,0,6 MSVE5,0,6 MSVE7,,8,60 MSVE7,,8,60 Nominal Tons &.0 BLOWER PERFORMANCE ECM-. MOTOR AMPS Volts 1 Ph. Blower Jumper 50/60 Hz. Code Wheel 0.10" 0.0" 0.0" 0.0" 0.50" A B C D A B C D A VB 10 X 7 B C D A VH 10 X 7 B C D A VC 1 X 9 B C D A VI 1 X 9 B C D MS (TG) Page VA 9 X 6 & VG 10X

7 Phone Fax Model Number MSVT18, MSVT18, MSVT5,0,6 MSVT5,0,6 MSVT7,,8,60 MSVT7,,8,60 Nominal Tons &.0 & VK BLOWER PERFORMANCE X-1 MOTOR AIR FLOW Volts 1 Ph. Blower 50/60 Hz. Code Wheel Tap 0.10" 0.0" 0.0" 0.0" 0.50" VD 9 X VJ 9 X VE 10 X X VF 1 X VL 1 X Model Number MSVT18, MSVT18, MSVT5,0,6 MSVT5,0,6 MSVT7,,8,60 MSVT7,,8,60 Nominal Tons Volts 1 Ph. 50/60 Hz. & & BLOWER PERFORMANCE X-1 MOTOR AMPS Blower Code Wheel VD Page 7. 9 X 6 VJ 9 X 6 VE 10 X 7 VK 10 X 7 VF 1 X 9 VL 1 X 9 Tap 0.10" 0.0" 0.0" 0.0" 0.50" MS (TG)

8 Phone Fax Model Number MSPS18, MSPS18, MSPS5,0,6 MSPS5,0,6 MSPS7,,8,60 MSPS7,,8,60 Nominal Tons & BLOWER PERFORMANCE PSC MOTOR AIR FLOW Volts 1 Ph. 50/60 Hz. Code Blower Wheel & SA 9 X SJ 9 X 6 SB SC SM 10 X 7 SK 10 X 7 1 X 9 1 X 9 Tap 0.10" 0.0" 0.0" 0.0" 0.50" Low Med High Low Med High Low Med High Low Med High Low Med High Low Med High Model Number MSPS18, MSPS18, MSPS5,0,6 MSPS5,0,6 MSPS7,,8,60 MSPS7,,8,60 Nominal Tons &.0 Volts 1 Ph. 50/60 Hz. & SA 9 X SJ 9 X BLOWER PERFORMANCE PSC MOTOR AMPS Blower Code Wheel SB 10 X 7 SK 10 X 7 SC 1 X 9 SM 1 X 9 Page 8. Tap 0.10" 0.0" 0.0" 0.0" 0.50" Low Med High Low Med High Low Med High Low Med High Low Med High Low Med High MS (TG)

9 Cabinet Size Code Data Volts 1 Ph Type No Amps (1) Circuits Kw () ELECTRICAL DATA Heater Data Minimum Circuit Ampacity Maximum Overcurrent Protection MOCP MOCP MOCP MOCP MOCP Amps Amps Amps Amps Amps MCA MCA MCA MCA MCA 115V 08V 08V 0V 0V 115V 08V 08V 0V 0V 115V 08V 08V 0V 0V (,) (,) (,) (,) (,) Cr 1 Cr 1 Cr Cr 1 Cr Cr 1 Cr 1 Cr Cr 1 Cr Cr 1 Cr 1 Cr Cr 1 Cr MSVE18, MSVT18, MSPS18, MSVE5, 0, 6 MSVT5, 0, 6 MSPS5, 0, 6 MSVE7,, 8, 60 MSVT7,, 8, 60 MSPS7,, 8, 60 () SMALL CABINET-NOMINAL &.0 TONS-0 TO 10 Kw VA 0. 08/0 ECM VG ECM VD 0. 08/0 CTM VJ CTM SA 0. 08/0 PSC SJ PSC (5) MEDIUM CABINET-NOMINAL.0,.5, TONS-0 TO 15 Kw VB /0 ECM VH ECM VE /0 CTM VK CTM SB /0 PSC SK PSC (18) LARGE CABINET-NOMINAL,.5,.0, TONS-0 TO 0 Kw VC /0 ECM VI ECM VF /0 CTM VL CTM SC /0 PSC SM PSC (1) Nameplate Amps () Nominal Kw At 0V (Derate 5% For 08V) () Fuse or HACR Breaker () Maximum Overcurrent Device, Overcurrent Protection Installed On Breaker Models Are Sized Per MCA Page 9. MS (TG)

10 Phone Fax HOT WATER CAPACITY-WITH FACTORY PUMP 65 F ST ATED EWT MODEL CFM GPM BTUH BTUH BTUH BTUH BTUH APD 10 F 10 F 10 F 150 F 160 F IWC SMALL CABINET &.0 TON MS** MS** MEDIUM CABINET.0,.5, TON MS** MS** MS** LARGE CABINET,.5,.0, TON MS** MS** MS** MS** MS (TG) Page 10. ROWS FPI 1 1 1

11 Phone Fax HOT WATER CAPACITY-BOILER LOOP 65 F EAT 180 F EWT 0 F t (NO PUMP) MODEL CFM GPM BTUH LAT LWT APD WPD F F IWC FT SMALL CABINET &.0 TON MS** MS** MEDIUM CABINET.0,.5, TON MS** MS** MS** LARGE CABINET,.5,.0, TON MS** MS** MS** MS** MS (TG) Page 11. ROWS FPI 1 1 1

12 Phone Fax CORRECTION FACTORS FOR GLYCOL CORRECTION FACTORS CALCULATED AT NOMINAL CFM EWT Ethylene Glycol Correction Factors (Percent Of Concentration) F 0% 0% 0% 50% 60% 70% 80% EWT Propylene Glycol Correction Factors (Percent Of Concentration) F 0% 0% 0% 50% 60% 70% 80% Page 1 MS (TG)

13 Phone Fax CHILLED WATER "A" COIL COOLING CAPACITYS 80/67 F EAT 5 F EWT MODEL NO. CFM TOTAL SENS LATENT LDB LWB GPM WPD FT. APD CW018A8K CW0A8K CW06A8K CW08A9K CW060A9K ROW "A" COIL HEATING CAPACITYS MODEL NO. 10 F EWT 0 F t 68 F EDB 10 F EWT 0 F t 68 F EDB BTUH LAT GPM APD WPD BTUH LAT GPM APD WPD CW018A8K CW0A8K CW06A8K CW08A9K CW060A9K MODEL NO. 160 F EWT 0 F t 68 F EDB 180 F EWT 0 F t 68 F EDB BTUH LAT GPM APD WPD BTUH LAT GPM APD WPD CW018A8K CW0A8K CW06A8K CW08A9K CW060A9K MS (TG) Page 1.