4" LED Recessed Lighting 17 W, 18 W, and 20 W IC LED Round Adjustable. C 6.4 in (163 mm) 0.5 in (13 mm) 9.5 in (241 mm) 4.

Transcription

1 DIMENSIONS SIDE VIEW (9 mm) 3.0 in (330 mm) LED Type: S and A 8.9 in (480 mm) LED Type: S and A BOTTOM VIEW () 7.3 in (439 mm) 5.0 in (7 mm). in (8 mm) 0.5 in (3 mm) D 6.4 in (63 mm) B BOTTOM VIEW (Trimless) 7.3 in (439 mm). in (8 mm) 5.0 in (7 mm) A Frame B Trim Junction Box D I Housing E Mud Ring Lutron Hi-lume % LED Driver not shown m A B 9.5 in (4 mm) A 9.5 in (4 mm) (9 mm) (9 mm) E 3.9 in (99 mm) 5.3 in (35 mm) PRINIPAL FEATURES ) Xicato LEDs: 83 RI (typical) or 97 RI, R9=95 (typical). ) Powerful adjustable LED module in efficient trim with excellent cutoff. ) Standard LutronR Hi-lumeR % LED Driver delivers continuous, flicker-free dimming from 00% down to % of measured light output. ) 50,000 hours rated LED system life (LED and driver) at 77 F (5 ) ambient. ) Hi-lumeR % EcoSystemR LED Driver features Soft-on, Fade-to-T technology. ),, 36, 4 and 5 beam angles available. ) Trim supports a variety of lens/accessory options. ) I fixtures must be used for installations containing insulating materials. Non-I fixtures cannot be used in this type of application. ) I fixtures meet airtight and hicago plenum construction requirements for.0 FM or less air leakage. ) Frame constructed of 0 gauge steel. ) UL and cul Listed. ) Supplied with 4 in to 4 in (356 mm to 60 mm) adjustable bar hangers. ) LED optics rotate 357 and tilt from 0 to 4. ) Housings finished with reclaimed black powder coat. ) Adjustable mounting brackets can be mounted on any side of the fixture. ) RoHS compliant. ) Field replaceable components: - Beam angle reflector - LutronR LED driver - LED module with integrated heat sink - Decorative trim/lens ) -Wire forward phase and HomeWorksR QS EcoSystemR controls are generally for residential applications. and EcoSystemR controls are generally for commercial applications. 4.4 in ( mm) 8.0 in (03 mm) SPEIFIATIONS Operating Temperature: 3 F to 04 F (0 to 40 ) Decibel Rating: Quiet in a 5 db room Max eiling Thickness:.0 in (50 mm) Mud Ring Thickness : 0.5 in (3 mm) eiling utout: ø 4.8 in (ø mm) Weight: 4.0 lb (.8 kg) Size (by LED Type): S and A: 3.0 in x 9.5 in x 6.4 in (330 mm x 4 mm x 63 mm) S and A: 8.9 in x 9.5 in x 6.4 in (480 mm x 4 mm x 63 mm) Junction Box Size: 4.9 in x 3. in x.75 in (4 mm x 79 mm x 44 mm). See NE chart 34.6A for box fill/wiring capacity. OMPATIBLE ONTROLS Visit Mud ring is for trimless fixtures only. PWM dimming below 5% for Hi-lume % EcoSystemTM drivers. IVALOR

2 ORDERING GUIDES BASE UNIT ONFIGURATION m Select appropriate code in each column to complete model number. Example: FAT4RI A F B XX - R4 MW SO XX SERIES LED TYPE TEMP BEAM ONTROL HANGING EILING TRIM FINISH LENS OPTIONS FAT4RI Finire 4 in I Adjustable A 7 W 700 lm 97 RI, K 0 0º Beam F -Wire Forward Phase 0 V~ B 4 in to 4 in (356 mm to 60 mm) Adjustable Bar Hangers XX Standard R4 Adjustable 3, 4 MW Matte FG Frosted Glass XX None (Standard) FAZ4RI Finire 4 in Trimless I Adjustable S 8 W lm 83 RI, K 30 30º Beam 3 0 V~ 0 in (5 mm) R406 Pinhole Adjustable 3, 4 BL Matte SO Micro Prism SoliteTM WL Wet Location 5 A 0 W 850 lm 97 RI, 35 3 K 36 36º Beam V~ 5.5 in (38 mm) Z4 Trimless Adjustable 4, 7 SG Stainless 8 G lear Glass TF enter Frosted Glass 3, º Beam E EcoSystem 0 V~ 0 0 in (5 mm) RB Bronze º Beam E7 EcoSystem 77 V~ 0 L lear Bright Alzak WE Wheat Alzak All Lumen and RI values typical. Typical Lumen values are derived from Downlight photometric data. Adjustable fixtures in the Wall Wash position may have lower Lumen output. See photometric table for exact Lumen output. 3 Applicable to FAT4RI series only. 4 Downlight trims can be used with Adjustable fixtures when placed in the Downlight position but will limit the adjustable capability of the fixture 5 For use in covered interior ceilings only. 6 Available in the S LED type only. 7 Applicable to FAZ4RI series only. 8 Metallic Paint. 9 Decorative trim. 0 Hi-lumeR % EcoSystemR LED driver with Soft-on, Fade-to-T technology. Flange is standard for the lear Bright Alzak and Wheat Alzak finishes. NOTES: Housing and trim assemblies can be purchased or shipped separately. Additional options available: 4000 K T ustom options Not for use in Quebec. For more information, please contact ustomer Service at fixtures@lutron.com or For Title 4 compliant model numbers or for more information, please contact ustomer Service at fixtures@lutron.com or IVALOR

3 PHOTOMETRI DATA m RI / R9 = 95 LED TYPE A (Downlight position) A (Wall Wash position) BEAM ANGLE MODEL NUMBER FA_4R_A740 FA_4R_A740 LIGHT OUTPUT (lm) WATTAGE (W) 8.3* 4.3* EFFIAY (lm/w) 39.7* 49.0* OLOR AURAY RI OLOR TEMPERATURE 700 K 700 K ANDELA PLOT (NADIR) 0 plane 45 plane 90 plane MULTIPLE UNITS H = DISTANE FROM EILING ONE OF LUMINANE Height Nadir (fc) 50% Lighted Diameter FOOTANDLES (fc) ON WALL (FIGURE A) ft ( cm) ft (83 cm) ft (44 cm) ft (305 cm) ft (366 cm) ft (47 cm) ft (488 cm) Lens Trim olor olor Temperature LEAR SOLITE 00% 98% 86% FROSTED WHITE BLAK STAINLESS BRONZE LEAR WHEAT 00% 75% 85% 78% 99% 94% 700 K 3000 K 3 K 86% 93% 00% FIGURE A - MULTIPLE UNITS DIAGRAM H NOTE: There will be an 5% increase in light output when using the 0 or 36, reflector compared to the 30, 40, and 50 reflectors. * Power measurements are taken from an I fixture input power. Non-I fixture input power is approximately W greater than the I fixture input power due to a thermal protection device. IVALOR 3

4 PHOTOMETRI DATA m RI / R9 = 95 LED TYPE A (Downlight position) A (Wall Wash position) BEAM ANGLE 0 0 MODEL NUMBER FA_4R_A70 FA_4R_A70 LIGHT OUTPUT (lm) WATTAGE (W) 8.4* 4.3* EFFIAY (lm/w) 49.* 54.9* OLOR AURAY RI OLOR TEMPERATURE 700 K 700 K ANDELA PLOT (NADIR) 0 plane 45 plane 90 plane MULTIPLE UNITS H = DISTANE FROM EILING ONE OF LUMINANE Height Nadir (fc) 50% Lighted Diameter ft ( cm) ft (83 cm) ft (44 cm) ft (305 cm) ft (366 cm) ft (47 cm) ft (488 cm) FOOTANDLES (fc) ON WALL (FIGURE A) Lens Trim olor olor Temperature LEAR SOLITE 00% 98% 86% FROSTED WHITE BLAK STAINLESS BRONZE LEAR WHEAT 00% 75% 85% 78% 99% 94% 700 K 3000 K 3 K 86% 93% 00% FIGURE A - MULTIPLE UNITS DIAGRAM H NOTE: There will be an 5% increase in light output when using the 0 or 36, reflector compared to the 30, 40, and 50 reflectors. * Power measurements are taken from an I fixture input power. Non-I fixture input power is approximately W greater than the I fixture input power due to a thermal protection device. IVALOR 4

5 IRUIT DIAGRAMS m WIRE FORWARD PHASE ONTROL (0 V~ ONLY) Forward Phase ontrol 0 V~ Hi-LumeTM % -Wire LED Driver 3 Grounded 3-WIRE ONTROL (0 77 V~) Fluorescent ontrol 0 77 V~ Orange/Yellow Brass/Red Orange Hi-lumeTM % LED Driver 3 Grounded ) EcoSystemR DIGITAL ONTROL (0 77 V~) 0 77 V~ EcoSystemR ontrol E (Low-Voltage Data Link) E (Low-Voltage Data Link) Purple Purple Hi-lumeTM % EcoSystemR LED Driver with Soft-on, Fade-to-T 3 Grounded ) may be optional for certain control types. See product specification submittal for specific wiring diagrams. Refer to the specific LutronR control specifications for exact input voltage rating of the product W maximum rated drivers. 4 Ensure that both ground wires are connected in the junction box. ontact ustomer Service for custom mounting options at fixtures@lutron.com For a list of compatible controls and control ratings, visit or contact the LED ontrol enter of Excellence at.877.dim.led8 or leds@lutron.com IVALO OLLETION ) Lutron, Lutron, EcoSystem, IVALO, IVALO Lighting (registered in the U.S. only), Hi-lume, and Finiré are registered trademarks and Lutron Ivalo ollection and EcoSystem are trademarks of Lutron Electronics o., Inc Lutron Electronics o., Inc. Lutron Electronics o., Inc. 700 Suter Road, oopersburg, PA 8036 Telephone Fax fixtures@lutron.com For limited 0-year warranty details, see Specification subject to change without notice IVALOR 5