VILLBEK LTD. D CATALOGUE INSULATE 2017 V1

Transcription

1 2017 V1 INSULATE D TOOLS CATALOGUE

2

3 IMPACT TEST There are two tests carried out: The first test is performed at an ambient of -25±3 C(the tools lay in a cold chamber for 2 hours), if with C marked test need to be done by -40±3 C and is carried out 120 seconds after the tools have been removed from the chamber. The second test is carried out at ambient temperature of 23±5 C. The hammer is allowed to fall freely on three different places of the insulated material. The test piece is acceptable if t he handle is not cracked, broken or does not show signs of faking. This test can be compared to a fall of the tool from a height of 0.6m at a temperature of -25 C and a fall from a height of 2m at room temperature. INSULATION TEST Before testing the test piece is heated to 70 C±3 C for 168 hours. The hanger is loaded with weights(500n), wrenches and sockets sets with weights(100n). The duration of test is 3 minutes after the test piece has been removed from heat. The test piece is acceptable if the handle remains firmly attached to the conducting part after 3 minutes of testing. ELECTRICAL TEST Before testing, the tools are immersed in a bath of water at room temperature of 24 hours(±0.5hours) The test pieces are acceptable if there is no electrical discharge, spark over or flashover, during the 3 minutes of testing at a voltage of 10 KV. FLAME RETARDANCY TEST The flame is applied to the test piece for 10 seconds. The test piece is acceptable if the height of the flame on the burning handle does not exceed 120mm in an observation period of 20 seconds after the burner has been removed. STAMP TEST The indenter, loaded with a weight of 20N and a voltage of 5 KV, is applied to the centre of the handle. The test is successful if the test piece subsequently passes the electrical test.

4 INSULATED PLIERS Soft wire Medium hard wire Hard wires Cu+Al multi-conductor cable, strand and multi-stranded Metal part made in CRV steel Precision machined body with strictly heat treatment Manufactured according to IEC60900 standard Metal part made in CRV steel Pearl nickel plated surface Precision machined body with strictly heat treatment Manufactured according to IEC60900 standard DIPPED GRIP DIPPED GRIP COMBINATION PLIERS COMBINATION PLIERS

5 FLAT NOSE PLIERS SNIPE NOSE SIDE CUTTING PLIERS WATER PUMP PLIERS CURVED NOSE CUTTING PLIERS mm (Max) DIAGONAL PLIERS DIAGONAL PLIERS

6 INJECTION INSULATED CABLE CUTTERS FLAT NOSE PLIERS C D1 T1 L3 W3 mm (Max) mm 2 (Max) L3 W3 D1 T CABLE SHEARS ROUND NOSE PLIERS D1 T1 L3 W3 mm (Max) mm 2 (Max) WIRE STRIPPERS L3 W3 D1 T WIRE STRIPPERS mm mm mm mm

7 INSULATED SCREWDRIVERS Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap VDE SLOTTED SCREWDRIVER A B CxD L x x x x x x VDE PHILLIPS SCREWDRIVER A B CxD L PH X PH X PH X PH X

8 INSULATED SCREWDRIVERS Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap VDE SCREWDRIVERS (SLOTTED) VDE SCREWDRIVERS (SLOTTED) PHILIPS B A B L L L L L L L07 PH L15 PH L08 PH L16 PH L09 PH L17 PH L10 PH L18 PH

9 VDE POZI SCREWDRIVER VDE TX SCREWDRIVER A B CxD L PZ X PZ X PZ X PZ X VDE HEX SCREWDRIVER A B CxD L T X T X T X T X T X VDE NUT SCREWDRIVER A B E CxD L A B CxD L X X X X X X x x x x x x x x x x x x INSULATED PRECISION SCREWDRIVER 7PCS SET C INSULATED SCREWDRIVER 8PCS SET Slotted: 0.5x3.0x50 Phillips: PH0x50 TX: T6x50 T8x50 T10x50 T15x50 T20x Slotted: 0.4x2.5x75, 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150 Phillips: PH0x60, PH1x80, PH2x100 Voltage Tester: 3.0x70 7

10 VDE PRECISION SLOTTED SCREWDRIVER C VDE PRECISION PHILLIPS SCREWDRIVER C A B CxD L x x x x x A B CxD L PH x PH x PH x VDE PRECISION TX SCREWDRIVER C INSULATED PRECISION SCREWDRIVER 7PCS SET C A B CxD L T x T x T x T x T x Slotted: 0.23x1.5x50 0.3x1.8x50 0.4x2.0x50 0.4x2.5x50 0.5x3.0x50 Phillips: PH00x50 PH0x50 INSULATED SCREWDRIVER 7PCS SET INSULATED SCREWDRIVER 8PCS SET Slotted: 0.5x3.0x100, 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150 Phillips: PH1x80, PH2x100 Voltage Tester: 3.0x Slotted: 1.0x5.5x125 Phillips: PH2x100 TX: T10x70 T15x80 T20x100 T25x125 T30x130 Voltage Tester: 3.0x70 8

11 INSULATED SCREWDRIVER 6PCS SET INSULATED CHANGABLE SCREWDRIVER 12PCS SET C Nut: 5.5x x x x x x Slotted: 0.4x2.0x x2.5x x3.0x x3.5x x4.0x x5.5x x6.5x100 Phillips: PH0x60 PH1x80 PH2x100 Voltage Tester: 3.0x70 Handle: 31x PCS VDE INSULATED SCREWDRIVER SET (INDUSTRIAL) C INSULATED CHANGABLE SCREWDRIVER 50PCS SET C VDE/GS CERTIFICATED 4pcs slotted: 1.2x6.5x100mm,1x5.5x100mm,0.8x4x100mmx0.5x3 x100mm 2pcs Phillips:PH2x100mm,PH1x80mm 2pcs Pozidriv:PZ2x100mm, PZ1x80mmx 3pcs Torx: T20x100mm,T15x100mm,T10x100mm 1pc Single-Pole Voltage Tester 1pc Screwdriver Handle Packed by color box" x2.0x x2.5x x3.0x x3.5x x4.0x x5.5x x6.5x100 PH0x100 PH1x100 PH2x100 PZ0x100 PZ1x100 PZ2x100 T6x100 T8x100 T9x100 T10x100 T15x100 T20x100 T25x100 T27x100 T30x100 H2.5x100 H3.0x100 H4.0x100 H5.0x100 H6.0x100 R1x100 R2x100 TRI 1x100 TRI 2x100 TRI 3x100 TRI 4x100 TORO 4x100 TORO 6x100 TORO 8x100 TORO 10x100 M4x4.0x100 M5x5.0x100 M6x5.0x100 4x100 6x100 8x100 10x x89 8.1x Voltage Tester: 3.0x70 Handle: 31x105 9

12 INSULATED WRENCHES & SOCKETS C Metal part made in crv steel Chrome plated surface Well heat treated to meet DIN standard Manufactured according to IEC60900 standard BI-COLOR INJECTION GRIP VDE GS PENDING Metal part made in crv steel Chrome plated surface Well heat treated to meet DIN standard Manufactured according to IEC60900 standard B S A L DIPPED GRIP INJECTION INSULATED OPEN END WRENCH OPEN END WRENCH 10 S A B L S A B L

13 INJECTION INSULATED RING WRENCH C RING WRENCH VDE GS PENDING A H A H B S L L S A B L H B S L S A B L H RING GEAR WRENCH 72 teeth B S A L S A B L

14 INJECTION INSULATED T-HANDLE T-HANDLE H L /2" /8" H L /2" /8" INJECTION HEXAGONAL SOCKET 1/2" HEXAGONAL SOCKET 1/2" INJECTION HEXAGONAL SOCKET 3/8" HEXAGONAL SOCKET 3/8"

15 INJECTION SOCKET 1/2" SOCKET 1/2" H H D D D H D H INJECTION SOCKET 3/8" SOCKET 3/8" H H D D D H D H

16 INJECTION INSULATED REVERSIBLE RATCHET HANDLE 1/2" 3/8" REVERSIBLE RATCHET HANDLE 1/2" 3/8" VDE GS PENDING /2" /8" /2" /8" 200 INJECTION EXTENSION BAR 1/2" 3/8" EXTENSION BAR 1/2" 3/8" /2" /2" /8" /8" /2" /2" /8" /8" 250 CROSS RIM WRENCH INJECTION INSULATED JUNIOR HACKSAW D L1 L D L1 L L D D L

17 INJECTION INSULATED PRECISION TWEEZERS C PRECISION TWEEZERS INJECTION INSULATED PLASTIC CLAMP C PLASTIC BRUSH FULLY INSULATED 1000V Fixed head mm 35mm 50mm 15

18 INJECTION INSULATED KNIVES VOLTAGE TESTER C VDE GS/CE 125~250V CABLE KNIFE (STRAIGHT) DISMANTLING KNIFE (SEMICICLE) DISMANTLING KNIFE (LONG HOOK) CABLE KNIFE (GUARD) DISMANTLING KNIFE CABLE KNIFE (CHANGABLE) INJECTION INSULATED MALLET L D D Φ mm Weight/kg

19 P LASTIC SLIP-ON C APS SELF-CLAMPING SLIP-ON CAPS DIN VDE :2013 DIN VDE :2013 GSCC-1 10x80 GSCC 5x40 GSCC-2 10x80 GSCC 5x70 GSCC-3 10x80 GSCC 10x75 GSCC 20x100 GSCC GSCC 30x120 40x135 GSCC 50x155 GSCC 60x150 INJECTION INSULATED ADJUSTABLE WRENCH PRECISION MACHINED BODY WITH STRICTLY HEAT TREATMENT C S (Max) ADJUSTABLE WRENCH PRECISION MACHINED BODY WITH STRICTLY HEAT TREATMENT S S (Max)

20 INJECTION INSULATED HEXAGON KEY L-WRENCH FOR HEXAGON SCREWS HEXAGON KEY L-WRENCH FOR HEXAGON SCREWS V DE GS PENDING SOCKET WRENCH HEXAGON KEY T-WRENCH L D H 18 L D H D L H D L H INJECTION MOULDED HEXAGON KEY T-WRENCH 1000V

21 INJECTION INSULATED SCISSORS C INSULATED RUBBER MATS For Protection When Working Live or Close to Live Parts / mm x500x1, x1000x1,6 19

22 PLASTIC CLAMP PLASTIC CLAMP 1000V 1000V mm mm SAFETY GRIP SPREAD-WEDGE For NH fuses with arm protection Siemens handle for NH fuses 00 3, arm protection when interrupting high current intensity (arc). V V *20*37mm ADJUSTABLE TORQUE WRENCH With Protection Bag Chrome plated, made out of special steel, tempered, Accuracy ± 4%, of the taken measurement, Adjustable through button at the end of the handle, You feel the desired measurement is reaching by the slight Bending of the head, the accustic signal is muffled by the insulation, insulation dipped in various layers, tested piece by piece with V / Nm / Nm /4 3/ Nm 5 25 Nm 1000V 20

23 ADJUSTABLE TORQUE WRENCH With Protection Bag Chrome plated, made out of special steel, tempered, Accuracy ± 4%, of the taken measurement, Adjustable through button at the end of the handle, You feel the desired measurement is reaching by the slight Bending of the head, the accustic signal is muffled by the insulation, insulation dipped in various layers, tested piece by piece with V mm 1/ Nm mm 1/ Nm mm 1/ Nm 1000V INSULATING SLEEVE FOR LOW VOLTAGE CONDUCTOR WIRE RUBBER ISOMAT One side smooth,other side grooved. Use : Insulates live conductor wire up to 15mm d iameter during work on or near the conductor. Technical specifications : Made of rubber 3,3 mm thick. VTSTBT 440 BA x 1000 mmx 3,5 mm VOLTAGE TESTER VOLTAGE TESTER Voltage test, 2 pole with LED (12-690V AC/DC) Voltage test, 1 pole, indicating phase Phase rotation test, 2 pole Continuity with LED and acoustic signal Automatic self test function. Full voltage indication, even without batteries Automatic on/off function no buttons Build in, bright white, LED flashlight Double insulation, IP65, GS approved CAT IV 600V. 2000X is provided with battery and fulfills IEC , EN KAT IV 600 and TUV/GS. Voltage test, 2 pole with LED (12-690V AC/DC) Voltage test on display (7-800V AC/DC) Voltage test, 1 pole, indicating phase Phase rotation test, 2 pole Continuity with LED and acoustic signal Automatic self test function. Full voltage indication, even without batteries Automatic on/off function no buttons Build in, bright white, LED flashlight Double insulation, IP65, GS approved CAT IV 600V. 2100X is provided with battery and fulfills IEC , EN KAT IV 600 and TUV/GS. 2000X Voltage tester 2100X Contact probe Voltage tester Contact probe 21

24 PROTECTION HELMET Protection Helmet for electricians, with integrated vizor, adjustable to head. Additionally equipment (helmet light, ear protection...) on request EN 397:2012 EN 50365:2002 EN 166:2001 Colors: yellow, red, white, blue E-MAN HEAD LAMP HEAD LAMP Safety: Weatherproof: IP54 (dust and weather resistant), Lighting Performance: 3 Nichia 5mm LED, Light output: 22 lumens, Lighting surface area: 40m², 1 Lighting intensity. Weight and dimensions: Weight: 94 grams (with batteries), Width: 6cm - depth: 4,5cm - height: 3,5cm. Energy: 3 alkaline batteries supplied (3 x LR03 (AAA), Operating time: up to 60 hours. Safety: Weatherproof: IP54 (dust and weather resistant), Lighting Performance: 3 Nichia 5mm LED, Light output: 22 lumens, Lighting surface area: 40m², 1 Lighting intensity. Weight and dimensions: Weight: 94 grams (with batteries), Width: 6cm - depth: 4,5cm - height: 3,5cm. Energy: 3 alkaline batteries supplied (3 x LR03 (AAA), Operating time: up to 60 hours. Boxer 300 Boxer 410 BRACKET FOR FIXING ON HELMET KEEPS THE HEADLAMP ON A HELMET WITHOUT THE HEADBAND CLICAS 1200 x 1000 mmx 3,5 mm 22

25 DIELECTRIC BOOT DIELECTRIC OVERBOOT An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Dielectric boot provides protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes. Safety Footwear EN ISO I E HRO SRA CI Electrically Insulating Footwear EN Class 0 Dielectric Footwear ASTM F1117 Personal Protective Equipment PPE DIR 89/686/EEC An electrically insulating dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The dielectric boot provides protection of up to 20kV over the complete boot for over three minutes. Safety Footwear EN ISO I E HRO SRA FO Electrically Insulating Footwear EN Class 0 Dielectric Footwear ASTM F1117 Personal Protective Equipment PPE DIR 89/686/EEC (EU) RECS 35,36,37,39,40,41,42,43 44,45,46,47,49,50 (EU) REKA M: L: XL: RATCHET CABLE CUTTERS With ratchet device, energy saving when cutting Not for cutting steel or steel wire RATCHET CABLE CUTTER J38 Cutting range: 400 mm max. Cutting easily with forging blade and long lifetime Not for cutting steel or steel wire With safety lock cutting rage Lenght Weight Blade LK-760L 500mm2 max 430mm 0.90kg electrophoreses Weight Lenght J38 1,1 Kg 235 mm 23

26 CABLE KNIFE For removing all layers of insulation on cables with diameters of over 25mm Suitable for longitudinal and circular cutting Cutting depth can be adjusted from 0-5mm Replaceable blade (both sides can be used) Integrated wire bush for cleaning conductors to make better connections. Brushes up to 1000 MCM conductor. Wire brush is easily replaceable. Blade back design discourages scraping the aluminium conductor wich can distort the size. Stainless steel black oxide coated blade for maximum durability and sharpness. Lenght Weight PG-5 170mm 0.15kg BB-1 SELF-ADJUSTING INSULATION STRIPER For stripping the plastic or rubber insulation of the single, multiple cables and wires of mm 2 Stripping diameter can be adjusted automatically for different wire cross sections With wire cutter for copper and aluminium wires, mulitiple strand upto 6mm 2 With easy changeable blade, plastic jaws and adjustable length stop Shock-resistant glass fiber and plastic body No damaging of the conductor core, long lifetime Weight FS-D3 190mm 0.148kg MULTI-FUNCTIONAL CRIMPING PLIER For cutting, stripping wires and crimping insulated and non-insulated terminals, tabs and receptacles Designed with screw holes for cutting copper and brass wires (Thread: M2.6, 3.0, 4.0, 5.0mm) SELF-ADJUSTING INSULATION STRIPER For stripping the plastic or rubber insulation of the single, multiple cables and wires of 6-16mm 2 Stripping diameter can be adjusted automatically for different wire cross sections With wire cutter for copper and aluminium wires, mulitiple strand up to 16mm 2, single strand up to 6mm 2 With easy changeable blade, plastic jaws and adjustable length stop Shock-resistant glass fiber and plastic body No damaging of the conductor core, long lifetime Lenght Weight FS mm 0.23kg Weight WS mm 0,15kg 24

27 INSULATED TOOLS SET Metal part made in CRV steel,chrome plated surface Well heat treated to meet DIN standard Bi-color injection grip and dipped grip manufactured according to IEC60900 standard 22" WATER PROOF CASE IP67 CLASS VILLBEK LTD "WATER PROOF CASE IP67 CLASS A+B+C+D 52PCS INSULATED TOOLS SET WITH WATER PROOF CASE A+B+D+F 45PCS INSULATED TOOLS SET WITH WATER PROOF CASE A TRAY PCS INSULATED PLIERS B TRAY 11PCS SCREWDRIVER, KNIFE AND TESTER C TRAY 21PCS 1/2" SOCKETS AND ACCESSORY D TRAY 14PCS OPEN WRENCHES AND ADJUSTABLE WRENCHES 7" COMBINATION PLIERS 8" LONG NOSE PLIERS 6" DIAGONAL CUTTER 6" STRIPPING PLIERS 10" WATER PUMP PLIERS 6 CABLE CUTTER PH0X60,PH1X80,PH2X100,PH3X x75mm,3x100mm,4x100mm, 5.5x125mm,6.5x150mm. STRAIGHT KNIFE VOLTAGE TESTER SOCKETS: 10/11/12/13/14/16/ 17/18/19/21/22/24/27 SOCKETS BITS: 4,5,6,8MM EXTANSION BAR 5"&10" T HANDLE RATCHET HANDLE OPEN WRENCH 8/10/11/12/13/14/15 /16/17/18/19/22/24 8" ADJUSTABLE WRENCH E TRAY PCS 3/8" SOCKETS AND ACCESSORY F TRAY 14PCS NUTS AND PRECISION SCREWDRIVERS G TRAY 14PCS RING WRENCHES AND HEX KEYS H TRAY 4PCS SPECIAL TOOLS SOCKETS : 8/10/11/12/13/14/ 16/17/18/19/21/22 SOCKETS BITS: 4,5,6,8MM EXTANSION BAR 5"&10" T HANDLE RATCHET HANDLE NUT: 5/5.5/6/7/8/10/13 PRECISION: 3/PH0/T6/T8/T10/T15/T20 RING WRENCH: 10/11/12/13/14/15/17/19 HEX KEY:3/4/5/6/8/10 240MM RATCHET CABLE CUTTER HACK SAW PLASTIC CLAMP*2 25

28 INJECTION INSULATED SET 15PCS INJECTION INSULATED SET 29PCS Insulated Combination Plier 200 Insulated Diagonal Plier 160 Insulated Snipe Nose 200 SideCutting Plier Insulated Wire Stripper 160 Insulated Cable Knife 50x180 Straight Voltage Tester 3.0x70 Insulated Screwdriver Slotted Phillips 2.5x75, 3.0x100, 4.0x100, 5.5x125, 6.5x150 PH0x60, PH1x80, PH2x100, PH3x PCS 1/2" Insulated Socket 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27 4PCS 1/2" 4x120, 5x120, 6x120, 8x120 Insulated Hexagon Socket 2PCS 1/2" 125, 250 InsulatedExtension Bar 1/2" 200 Insulated T-handle Wrench 1/2" 250 Insulated Reversible Ratchet Insulated combination Plier Insulated Diagonal Plier Insulated Snipe Nose Side 160 Cutting Plier Insulated Adjustable Wrench 2PCS x100, 5.5x125 Insulated Screwdriver Slotted 2PCS Phillips PH1x80, PH2x100 INJECTION INSULATED SET 20PCS INJECTION INSULATED SET 20PCS PCS 3/8" Insulated Socket 4PCS 3/8" Insulated Hexagon Socket 2PCS 3/8" Insulated Extension Bar 3/8" Insulated T-handle Wrench 3/8" Insulated Reversible Ratchet 8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22 4*75, 5*75, 6*75, 8*75 125, PCS Injection Insulated Open End Wrenches Insulated Adjustable Wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24 27, 30,

29 INJECTION INSULATED SET 22PCS DIPPED INSULATED SET 20PCS /8" 200 Insulated T-Handle Wrench 3/8" 125 Insulated Extension Bar 3/8" Insulated Socket 8, 10, 12, 13, 14, 17, 19 Insulated Screwdriver Slotted 3.5X100, 4.0X100, 5.5X125 Insulated Screwdriver PH1X80, PH2X100, PH3X150 Phillips Insulated Open End Wrench 8, 10, 12, 13, 14, 17, Dipped Insulated Open End Wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24 27, 30, 32 INSULATED SET 25PCS INSULATED SET 21PCS Dipped Insulated 200 Combination Plier Dipped Insulated Diagonal Plier 160 6PCS Insulated Screwdriver PH: PH0x60, PH1x80, PH2x100 SL: 0.6X3.5X100, 0.8X4.0X100, 1.0X5.5X125 Insulated Cable 50x180 Knife(Straight) Insulated Cable 28x155 Knife(Semicircle) 7PCS 1/2'' Dipped Insulated 10, 11, 12, 13, 14, 17, 19 Sockets 7PCS Dipped Insulated 10, 11, 12, 13, 14, 17, 19 Open End Wrench 1/2'' Dipped Insulated 200 T-Handle Dipped Insulated Combination Plier Dipped Insulated Diagonal Plier 4PCS Insulated Screwdriver Insulated Cable Knif(Straight) 7PCS 1/2'' Dipped Insulated Sockets 4PCS 1/2" Dipped Insulated Hexagon Socket 2PCS 1/2" Dipped Insulated Extension Bar 1/2'' Dipped Insulated Reversible Ratchet PH: PH0x60 SL: 0.6x3.5x100, 0.8x4.0x100, 1.0x5.5x125 50x180 10, 11, 12, 13, 14, 17, 19 4x120, 5x120, 6x120, 8x ,

30 INSULATED SET 99PCS 3 PCS INSULATED PLIER SET Insulated Injection Combination 180 Plier Insulated Injection Snip Nose Plier 200 Insulated Injection Diagonal Plier PCS Injection Insulated Open Jaw Wrench 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 Injection Insulated 250 Adjustable Wrench Injection Insulated Pliers 200 Injection Insulated Snipe 200 Nose Side Cutting Pliers Injection Insulated Diagonal 160 Pliers Injection Insulated Wire 160 Strippers Injection Insulated Water 250 Pump Pliers Injection Insulated Cable 250 Shears Injection Insulated Cable cutters 240 4PCS Insulated Screwdrivers SL: 0.5x3.0x100, 1.0x5.5x125 PH: PH1x80, PH2x100 2 PCS Injection Insulated 50x180, 38x155 Cable Knife Insulated Saw 150 4PCS Injection Insulated Tweezers 2PCS Insulated Plastic 150, 200 Clamp 3PCS Insulated Plastic Slipon 1# 2# 3# Caps 3PCS Insulated Self- 10, 20, 30 Clamping Slip-On Caps Flashlight 28*100*5 VDE Precision Screwdriver Sets 7PCS VDE Changable Screwdriver Sets 50PCS VOLTAGE TESTER 140 ABS BOX 5 PCS INSULATED SCREWDRIVER SET 7 PCS INSULATED WRENCH SET Insulated Screwdriver Slotted 3.5X100, 4.0X100, 5.5X125 Insulated Screwdriver Phillips PH1x80, PH2x Insulated Injection Open End Wrench 8, 10, 12, 13, 14, 17, 19 28

31 9 PCS INSULATED SOCKET SET 11 PCS INSULATED SOCKET SET /8" Insulated Reversible Ratchet Handle 200 3/8" Insulated Extension Bar 125 3/8" Insulated Socket 8, 10, 12, 13, 14, 17, /8" Insulated T-Handle 200 Wrench 3/8" Insulated Socke 8, 10, 11, 12, 13, 14, 16, 17, 18, PCS INSULATED SOCKET SET 5PCS INSULATED RING GEAR WRENCH SET /8" Insulated T-Handle 200 Wrench 3/8" Insulated Socket 8, 10, 11, 12, 13, 14 3/8" Insulated Hexagon Socket 4x75, 5X75, 6X75, 8X /8" Insulated T-Handle Wrench 10, 12, 13, 14, 17 CARRY BAG PROTECTION BAG FOR ELECTRICAN'S GLOVES Bag for carrying and storing rubber mats and covers up to 1300 x 1000 mm. Made of strong plastic material, with zipped closing cap and adjustable carrying belt. BA x1000mm V x170 mm 29

32 TOOL BAG TOOL BAG EMPTY BAG Front bag, fold out front wall, 18 adjustable loops on front and rear wall (9 each), Fixed loops on the left and the right side (1 each), carrier rings, aluminium edge reinforcement, two locks with keys EMPTY BAG Removable central wall, semi-fold out front and rear wall, two surrounding leather straps, 18 adjustable loops on the front and on the rear wall (9 each), 16 push-in compartments on the central wall, aluminiumedge reinforcement, galvanized steel bottom tray, one lock with key, carrier rings Weight Material Weight Material ,8 Kg Genuine leather 420 x 150 x ,1 Kg Genuine leather 420 x 170 x 320 TOOL BAG Flat surface for standing. Max 150kg Linemarking - use handle as ruler Angle measuring on lid. 260 lid = open view of box and step, also protects hinges TOOL BAG EMPTY BAG Central wall, large front bag,semi-fold out front and rear wall, 8 push-in compartments on the front wall, 9 adjustable loops on the front of the central wall, 8 push-in compartments on the rear wall and 8 Fixed loops on the side-walls (4 each), aluminium edge reinforcement, galvanized steel bottom tray, surrounding leather strap, 2 locks with keys, carrier rings Weight Material ,0 Kg Genuine leather 450 x 190 x 340 TOOL BAG Outer Dimensions (mm) Inner Dimensions (mm) Weight Capacity (Lts) SSC1 464 x 353 x 142h. 400 x 300 x 80h. 2,2kg 9,6 SSC2 464 x 353 x 212h. 400 x 300 x 150h. 2,5kg 18 SSC3 464 x 353 x 362h 400 x 300 x 380h. 3kg 45,6 30

33 CRIMPING PLIER Crimping range: mm 2 LAS-005 is an ideal crimping tool for the connection of the power distributing cabinet. The tools are special designed with precise crimping die sets without screw fixing. You could replace the die sets only by pushing ahead. The operation is easy and convenient.the handles of LAS-005 are designed according to human factors engineering ensure high-quality crimping effect after crimping repeatedly. There are two sets of dies at both side for using and storing easily. SELF-ADJUSTABLE CRIMPING PLIER HSC8 6-4A It is applicable for tubular bare terminals and pre-insulated terminal on non-welding connection complied with standard electrical connection. When crimping, the terminal should be put into crimping pliers laterally. The demanded pressing force must be reached before the brake unit automatically release the jaw of the pliers. Thus high quality crimping standard could be ensured during repeatedly crimping. Due to perfect gripping position fixed and logical and light structure and the handle shape design meeting human being engineering principle, it reduces fatigue degree. Capacity AWG Lenght Weight LAS mm AWG 230mm 0.68kg Weight Capacity Lenght HSC8 6-4A 0,36 Kg 0,08-6,0 mm 175 mm SELF-ADJUSTABLE CRIMPING PLIER The design is unique due to light weight and saving energy. When crimping tightly, the gripping force would evenly transfer to all the section of crimping terminal. Because of reasonable design complied with human being engineering principle, the weight of the pliers is only 360g and the lenght of the pliers body is only 175mm. SUPER STRENGHT-SAVING CRIMPING PLIER FSA-056YJ For crimping insulated terminals and butt-connectors. Crimping range: 0,5-6,0 mm. Precise crimping die sets and integral lock with self releasing mechanism ensure highquality crimping effect after crimping repeatedly. Scientific leverage design saves energy when operating. Rrelease locking if operates error. Provided with two sets of dies in handles for using easily. Energy saving by humanization handle design. Weight Capacity Lenght HSC ,36 Kg 0,08-6,0 mm 175 mm Weight Capacity Lenght FSA-056YJ 0,75 Kg 0,5-1,5 1,5-2,5 4-6 mm 243 mm GERMANY STYLE SMALL CRIMPING PLIER PZ 0,5-16 Application: for cable and sleeves. Design: crimping in the marked trapezoidal profile for particularly tight connections between the sleeves and the conductor. Material: special tool steel. oil-hardened. Weight Capacity Lenght PZ 0,5-16 0,25 Kg 0,5-16,0 mm 220 mm 31

34 Combination pliers Diagonal cutting pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card Cr-V, Black finish Bi-color plastic handle Packed by PP card Long nose pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" mm,7" mm,8" Bent nose pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" mm,7" mm,6" mm,8" Wire stripping pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" Water pump pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" mm,10" 32

35 VILLBEK LTD. 12Pcs Combination spanners set 3 PCS Pliers set Chrome plated, matte finish Packed by pouch Forged steel, Nickel finish Bi-color dipped handle Packed by sliding card mm,4.5" 8Pcs Double open end spanners set 6x7/8x9/10x11/12x13/14x15/16x17/18x19/20x22 6Pcs screwdrivers set /7/8/9/10/11/12/13/14/17/19/22 8Pcs Double ring spanners set x7/8x9/10x11/12x13/14x15/16x17/18x19/20x22 Cable cutter Bi-color comfortable grip Black finish magnetic tip Packed by color box Chrome plated, matte finish Packed by pouch Chrome plated, matte finish Packed by pouch Drop forged carbon steel With dipped handle Packed by sliding card 5.5*100, 6.5*150, PH1*100 PH2*150, PZ1*100, PZ2* " 33

36 26Pcs bits set Pc ratchet handle 1Pc handle:60mm 25mm Cr-v bits: SL:4,5,6,7mm PH: PH0,PH1,PH2,PH3 PZ:PZ0,PZ1,PZ2,PZ3 HEX:2,2.5,3,4,5,6mm TX:T10,T15,T20,T25,T27,T30,T40 Packed by plastic box 38Pcs bits & sockets set "9Pcs 1/4 sockets: mm 25mm Cr-v bits: SL:3,4,5,6mm PH: PH0,PH1,PH2,PH3 PZ: PZ0,PZ1,PZ2,PZ3 HEX:2,2.5,3,4,5,5.5,6mm TX:T10,T15,T20,T25,T27,T30, T40 1Pc 3 Extension Bar 1Pc 1/4 Bit Adaptor 1Pc 1/4 Handle Packed by plastic box" Measuring tape Length & width:3m/10ftx16mm Accuracy can up to MID class 2 Material: ABS case covered with TPR Comfortable holding feel and impact resistant Both sides coat Nylon of the blade Manual powerful stop button With metric and inch blade Packed by PP card 34

37 Cable knife KBX-45 For stripping the end and the middle of the conducting wire and cable between ø10-45mm. Stripping thickness can be adjusted. The knives can not touch the metal cable cores when stripping. Knives can be sharpened or replaced. KBX-45 Details : 245*80*90mm Weight: 0.56kg Cable knife SK-50 Range of use: The tool is applicable for stripping the external insulation layer of cable less than 35kV. Operating instruction: The tool comprises of the base, the moving seat and the frame. The blade can be held in the moving upper party by the screw. And the repairing blade can be fixed on the two planes by the attached inner hexagon spanner easily. When the tool turns clockwise along cable, it can move automatically with the direction of cable. It can be adjusted by the adjusting screw. Note: the product has the adjusting screw. SK-50 Details Stripping range: ø20-50mm Length:250mm Package: Plastic case Weight: 0.80kg Cable shears FG-12 Details Working range: ø25mm2 max Length:220mm Color: yellow Weight: 0.29kg 35

38 NOTE 36

39

40 HUNGARY 6728 Szeged Vágány u. 15. Tel.: Fax: Web: