Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide

Transcription

1 DBS-PG-14

2 RACKS RB-2P Series - Economy Welded 2-Post Open Frame Rack When you need quality on a budget, you can trust RACK BASICS ; the contractor-friendly brand of economy rack and cabinet solutions. The RB-2P77, your best economy option when a standard welded rack is required. Constructed of 12 gauge steel (Suggested load capacity of 800 lb.). 44U Overall Height. 19 EIA-310-D compliant front and rear tapped rails. Side ganging and accessory mounting holes. Two (2) bonding studs included: One (1) at bottom to accommodate grounding from floor. One (1) at top to accommodate grounding from overhead. Rails and Base packaged in cardboard to prevent freight damage. RB-2P77 44U, 19 Rack Mounting, Overall Height DNRR**HDW Series - Heavy Duty Welded 2-Post Open Frame Rack Constructed of heavy duty 10 gauge steel (Suggested load capacity of 1,530 lb.). 19 EIA-310-D compliant front and rear tapped rails cable pass-through. Tapped accessory hole. Ganging and accessory mounting holes. Bonding studs located bottom and top to accommodate grounding options. Rails and base packaged in heavy duty cardboard to prevent freight damage. DNRR42HDW DNRR70HDW DNRR77HDW DNRR84HDW 24U, 19 Rack Mounting, Overall Height 40U, 19 Rack Mounting, Overall Height 44U, 19 Rack Mounting, Overall Height 48U, 19 Rack Mounting, Overall Height Looking for more options? Visit for complete offering including both 19 and 23 mounting options. DRZ4 Series - GR-63 Seismic Zone 4 Certified 2-Post Rack Constructed of 10 gauge steel (rails) reinforced with structural angle base for maximum structure. 19 EIA-310-D compliant front and rear tapped rails (6.00 deep). Rugged design engineered to perform in the most critical seismic environments. Increased overall width of inches provides additional side-to-side load strength. Two (2) sets of side mounting holes on side of rack allows for Hammond cable managers to be mounted facing front and rear. Two (2) ground studs - one (1) located at front of structural angle base, one (1) located under top Rack. Includes top Rack mounting holes compatible with top cable accessories. Includes large base for freestanding support of equipment. Independently tested and certified to exceed established Seismic Zone 4 Telcordia GR-63-CORE testing standards. Dynamic (seismic) suggested load capacity of 800 lb. of equipment installed and 50 lb. of overhead cable weight on the top when secured using C4K-Z4 seismic bolt down kit. Overall Dimensions Rack Mounting Dimensions Height Width Depth Units Height Width DRZ U

3 HDR Series - Desktop Open Frame Rack Base and panel constructed in 16 gauge steel. Includes two (2) 12 gauge steel 19 inch EIA-310-D compliant mounting rails. Rails are tapped rails with rack space indicators. Rails are angled 10-degrees when rack is assembled. Starter pack of 25 rack screws included. Available in 8U, 12U and 16U rack spacing. Side of rails include multiple tie points for cable management. Knockdown design ships unassembled for easy handling and shipping protection. Tested to nearly double the suggested load rating of 195 lbs. RACKS Overall Dimensions Rack Mounting Dimensions Height Width Depth Units Height Width HDR8UBK U HDR12UBK U HDR16UBK U DNRR**HDKB Series - Heavy Duty Knockdown 2-Post Open Frame Rack Constructed of heavy duty 10 gauge steel (Suggested load capacity of 1,200 lb.) EIA-310-D compliant front and rear tapped rails with 19 mounting. Side rails include: 1.25 cable pass-thru Tapped accessory hole and ganging/accessory holes Knockdown design ships unassembled for easy handling and shipping protection. Self-squaring design reduces assembly time. DNRR70HDKB 40U, 19 Rack Mounting, Overall Height DNRR77HDKB 44U, 19 Rack Mounting, Overall Height DNRR84HDKB 48U, 19 Rack Mounting, Overall Height Looking for other options? Visit our website for our full rack offering. DC4R Series - 4-Post Steel Open Frame Rack Constructed of 12 gauge steel. Available in 24U and 44U and in two convenient infinitely adjusting depths for standard rack mount equipment for extra deep equipment. Includes two (2) pairs of 19 mounting EIA-310-D compliant square-hole rails with RU indicator. Includes one (1) set of two (2) horizontal cable manager bars. Ships unassembled in a flat pack container for easy handling and shipping protection. Self-squaring design reduces assembly time. Optional pair of rails available for multiple mounting depths. Suggested load capacity of 2,000 lb. DC4R24 DC4R44 DC4R U - 24 to 36 overall depth 44U - 24 to 36 overall depth 44U - 32 to 48 overall depth Accessories: DC4RSHCM Additional Horizontal Cable Bars (2) DC4RPR24 Additional pair of rails for DC4R 24U DC4RPR44 Additional pair of rails for DC4R 44U RRALJK Standard Baying Hardware Kit See pages 14 to 17 for rack shelves, cable managers, and more. 3

4 WALL MOUNT HWMR Series - Heavy Duty Adjustable Depth Pivoting Wall Mount Rack Depth (in) HWMR1912UBK 12U Wall Rack to HWMR1920UBK 20U Wall Rack to HWMR1924UBK 24U Wall Rack to HWMR1932UBK 32U Wall Rack to Includes fifty (50) pack of screws and cage nuts and wall mounting template for easy installation. Wall mounting hardware not included. APB Series - Heavy Duty Adjustable Depth Wall Rack Depth (in) APB19007BK1 4U Wall Rack to APB19010BK1 6U Wall Rack to APB19014BK1 8U Wall Rack to APB19021BK1 12U Wall Rack to PBCOVER Dust cover/shelf 6.00 Includes twenty-five (25) pack of black rack screws with washers and mounting template for easy installation. Wall mounting hardware not included. Constructed of 12 and 16 gauge steel. 19 EIA compliant square hole rails. Rack frame pivots on center point. Adjustable depth from 18 to 24 using slots for easy set-up and adjusting. Three (3) spring pin positions allow for simplified equipment maintenance. Side and rear cable access with multiple tie points for cable management. Ships unassembled in a flat pack for easy handling and shipping protection. Suggested load capacity of 220 lb. Constructed of 14 gauge steel. 19 EIA compliant tapped rails. Double-hinged for easy rear access. Adjustable depth from 12 to 18 using slots for easy set-up and adjusting. Rear cable access with multiple tie points for cable management. Ships unassembled in a flat pack for easy handling and shipping protection. Suggested load capacity of 80 lb. APBS Series - Heavy Duty Adjustable Wall Rack with Shelf Depth (in) APBS194UBK 4U Wall Rack to Includes twenty-five (25) pack of black rack screws with washers and mounting template for easy installation. Wall mounting hardware not included. Constructed of 14 gauge steel. 19 EIA compliant tapped rails. Adjustable depth from 12 to 18 using slots for easy set-up and adjusting. Includes twelve (12) inch depth shelf. Rear cable access with multiple tie points for cable management. Ships unassembled in a flat pack for easy handling and shipping protection. Suggested load capacity of 75 lb. FWB Series - Economy Fixed Wall Rack Depth (in) FWB191UBK 1U Wall Rack 6.00 FWB192UBK 2U Wall Rack 6.00 FWB194UBK 4U Wall Rack 6.00 Includes four (4) black rack screws with washers and clip nuts per rack unit. Also includes mounting template for easy installation. Wall mounting hardware not included. Constructed of 16 gauge steel. 19 EIA compliant rails with clip-nuts. Hinged for easy rear access to devices. Rear cable access. Suggested load capacity of 70 lb. VPB Series - Heavy Duty Vertical Wall Rack VPB192UBK 2U Vertical Wall Rack VPB194UBK 4U Vertical Wall Rack VPB196UBK 6U Vertical Wall Rack Includes four (4) black rack screws with washers and clip nuts per rack unit. Wall mounting hardware not included. Constructed of 14 gauge steel. Horizontal or vertical equipment mounting. 19 EIA compliant rails with clip-nuts. Suggested load capacity of 135 lb. Rear cable access. 4

5 RCHLB Series - Heavy Duty Ventilated Wall Mount Security Lock box Panel Overall Dimensions Height H W D RCHLB193UBK1 3U Note: Usable depth = HLP Series - Low-Profile Network/Security Wall Mount Cabinet Rack Space Mounting Overall Dimensions (Inches) Part # Inches Units Height Width Depth HLP4UBK HLP6UBK HLP8UBK Includes starter pack of black rack screws and clip nuts. Wall mounting template is included but hardware is not. Optional Accessories: Part # HLP4UR 4U Mounting Rail Kit Features: Constructed of 16 gauge steel. 19 EIA compliant rails with clip-nuts. Vented sides with cable entry hole Lock and key included. Fixed mounting rails recessed (1 ). Suggested load capacity of 130 lb. Finished in textured black powder paint. Features: Available in 4U, 6U and 8U. Constructed of 16 gauge steel. 12 gauge steel mounting rails are punched for use with clip nuts. Rails pivot 180 degrees for easy equipment mounting. 22 inches of usable vertical mounting equipment depth. Conduit knockout sizes include: 2.0, 1.5, 1.0, 11/16 and 9/16 Two (2) laser knockouts for optional fans located top and bottom. Includes studs for grounding and electrical box installation. Rugged sand-textured black powder paint (reduced fingerprints and marks). Suggested load capacity of 150 lb. WALL MOUNT HWM Series - Swing Out Wall Mount Cabinet Constructed of 14 gauge steel (rear section); 16 gauge steel (center section and doors). Includes one (1) pair of tapped (10-32) mounting EIA compliant adjustable depth tapped rails. Available in three (3) depths and four (4) heights. All sizes include either vented 63% perforated front door or clear window front door. Center section features: Heavy duty spring-hinge pin for easy installation and removal. Non-removable side panel includes two (2) vents and fan grill. Rear section features: Top and side conduit knock-outs for cable entry. Generous cable management lances located on the rear section as well as on mounting rails. Front door and center section keyed the same. Grounding lugs located on top and bottom of the door, center and rear sections. Rugged sand-textured black powder paint (reduced fingerprints and marks). Suggested load capacity of 275 lbs. Designed for side venting high capacity servers, switches and other equipment. Vented Door Window Door Overall Dimensions Rack Mounting Dimensions Additional sizes available at Height Width Depth Units Height Width Center Depth HWM2412U20BK HWM2412U20WDBK U HWM2412U26BK HWM2412U26WDBK U HWM2420U20BK HWM2420U20WDBK U HWM2424U26BK HWM2424U26WDBK U Accessories Cabinet Rack Units Solid Front Door Tapped Rail (Pair) Square Hole Rail (Pair) 12U HWMSD2412UBK HWMTR12U HWMSR12U 20U HWMSD2420UBK HWMTR20U HWMSR20U 24U HWMSD2424UBK HWMTR24U HWMSR24U Power Outlet Strip Clip HWMPCLIP Lock (Keyed Differently) HWMSLOCK 5

6 RCHS Series - Heavy Duty Solid Knockdown A/V Cabinet Rack Overall Dim s (in) Units H W D RCHS BK1 8U RCHS BK1 10U RCHS BK1 13U RCHS BK1 16U RCHS BK1 6U RCHS BK1 8U RCHS BK1 13U RCHS BK1 16U RCHS BK1 16U Includes rubber feet, black ABS plastic handles, a starter pack of clip nuts & matching 1421ABK screws. Features: Constructed of 16 gauge steel. Knock-down design. Assembly required (flat-pack shipment). Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included). EIA compliant rails with punched round holes for clip-nuts. Suggested load capacity of 800 lb. Black powder paint finish. CABINETS RCHV Series - Heavy Duty Vented Knockdown A/V Cabinet Rack Overall Dim s (in) Units H W D RCHV BK1 8U RCHV BK1 10U RCHV BK1 13U RCHV BK1 16U RCHV BK1 8U RCHV BK1 10U RCHV BK1 13U RCHV BK1 16U RCHV BK1 16U Includes rubber feet, black ABS plastic handles, a starter pack of clip nuts & matching 1421ABK screws. Features: Constructed of 16 gauge steel. Knock-down design. Side ventilated for passive air flow. Assembly required (flat-pack shipment). Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included). EIA compliant rails with punched round holes for clip-nuts. Suggested load capacity of 800 lb. Black powder paint finish. RCHD Series - Locking Door for RCHS/HCHV Cabinet Series Rack Overall Dim s (in) Units H W D RCHD1910BK1 6U RCHD1914BK1 8U RCHD1917BK1 10U RCHD1928BK1 16U Includes mounting hardware Features: Constructed of 16 gauge steel. Both front & back of RCHS rack cabinets are punched to accept these doors Mounts either right or left hand hinge (door & cabinet are symmetrical) Includes installed lock and two keys Black powder paint finish. Shown Fastened to RSHV Cabinet See pages 14 to 17 for rack shelves, cable managers, and more. RCBS Series - Table Top A/V Cabinet Additional sizes available. Rack Overall Dim s (in) Units H W D RCBS BK1 3U RCBS BK1 4U RCBS BK1 6U RCBS BK1 8U RCBS BK1 2U RCBS BK1 3U RCBS BK1 4U RCBS BK1 6U Includes rubber feet, black ABS plastic handles, a starter pack of clip nuts & matching 1421ABK screws. Features: Constructed of 16 gauge steel. Two pairs of fixed 19 EIA-310-D compliant round hole punched rails. Suggested load capacity of 600 lb. Black powder paint finish. 6

7 RCSC Series - Deavy Duty Knockdown Server Cabinet The RCSC Rack Cabinet features a stacking design that allows for up to three (3) cabinets* to be stacked atop each other. This Rack Cabinet is fully loaded and includes two (2) pairs of infinitely adjustable sliding EIA square-hole rails, punch-outs for cable entry and/or fan cooling and comes in a variety of sizes and depths. The unique stacking feature enables your cabinet space to grow as your needs do. *Stack up-to three (3) 12U, two (2) 24U or one (1) of each cabinet atop each other using the required baying kit (RCSCBAY). The 12U cabinet is a great starter cabinet for any small to medium sized business. Optional Vented Window door shown. RCSC Frame Mounting Rails Cable Entry & Management Knockdown 16 gauge steel frame with heavy-duty struts contributing to a weightload rating of 1500 lb. Ships unassembled. Four (4) embosses are included with support for optional levelling feet or casters. Grounding studs provided on body. Includes two (2) pair of 19 mounting EIA-310-D compliant square-hole design feature U space markings. Rails are infinitely adjustable in depth. Rails are fabricated of heavy duty fourteen (14) gauge steel, painted smooth black. The top and bottom of the RCSC includes two (2) laser knockouts (per side) for cable-entry or fans (includes gasket strip material). For 36 depth cabinet side panels include cable entry knockouts. Also includes a laser knockout rear gland plate for floor-level cable entry. EASY ASSEMBLY! OPTIONAL DOORS Doors Thermal Performance Finish Optional doors are available in solid, tinted acrylic with venting (see above-left) and high airflow vented. Snap-in hinges can be mounted without having to bolt-on from inside the cabinet. In addition, the hinges can be mounted on the left or right. High airflow perforated doors for both front and rear of the cabinet are suggested for most server applications. Perforated doors meet server manufacturer Free-Air- Ratio (FAR) requirements at 65%. Finished in rugged black powder paint. Max Overall Overall Mounting Units Height Depth Depth RCSC BK1 12U RCSC BK1 24U RCSC BK1 12U RCSC BK1 24U RCSC BK1 12U RCSC BK1 24U Includes fifty (50) pack cage nuts and screws. 42 Depth option available upon request. Dual laser knockouts at rear of cabinet for optional fans or cable entry when stacked. Simple Stacking CABINETS Optional Locking Doors RCSC19021SDBK1 12U Solid Door w/lock RCSC19021VDBK1 12U Vented Door w/lock RCSC19021WDBK1 12U Vented Window Door w/lock RCSC19042SDBK1 24U Solid Door w/lock RCSC19042VDBK1 24U Vented Door w/lock RCSC19042WDBK1 24U Vented Window Door w/lock Optional Accessories: RCSCATIP RCSCBAY GRDKIT04 DNFK1AC120 DNFK2AC120 Anti-tip Racks Baying kit - bays (2) RCSC s together (vertically or horizontally) Cabinet ground cable kit Single (1) Fan kit with grills and cord Dual (2) Fan kit with grills and cord For detailed drawings please visit Optional Casters Rated 1425P Light-duty casters(4) 400 lb 1425BH Heavy duty casters(4) 1000 lb *NOTE: Baying kit (RCSCBAY) is required to lock cabinets together securely when stacking. 7

8 CLC Series - Co-Location Cabinet System The all new and improved Co-location Rack Cabinet System from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features. Features: One single frame allows multiple bay configurations. Mounting space includes: 1-Bay = 44U, 2-Bay = 21U, 3-Bay = 14U, 4-Bay = 10U Standard available configurations available in 36, 42 and 48 depths. Vented shelves include rear removable panels for vertical PDU installations. Front and Rear Perforated Doors designed for high air flow. Doors include 4-pin combination lock with key override. Vertical Cable Managers can be installed either top or bottom. Designed to accommodate sliding rail mount kit on servers. Cabinet top includes removable top panel and provisions for containment system and cable trough accessories. Easily remove cover panels to install a vertical PDU. CABINETS Specifications: 14-gauge welded steel frame; 16-gauge doors and side panel. Adjustable depth 19 EIA-Compliant square hole mounting rails. Finished in rugged textured black powder paint. Also available in textured white upon request. Tested to nearly double the suggested load rating of 1,800 lbs. New and Improved Design! Visit website for full product details. Vertical Cable Management can easily be moved to top or bottom. Step 1 Frame Kit Overall Dimensions 24 (W) x 83 (H) Depth (Inches) 1 Bay (44U) 2 Bay (21U) 3 Bay (14U) 4 Bay (10U) 36 CLC1B36BK CLC2B36BK CLC3B36BK CLC4B36BK 42 CLC1B42BK CLC2B42BK CLC3B42BK CLC4B42BK 48 CLC1B48BK CLC2B48BK CLC3B48BK CLC4B48BK Step 2 Top Panel Solid Top Panel 36 CLCST36BK CLCST36BK CLCST36BK CLCST36BK Solid Top Panel 42 CLCST42BK CLCST42BK CLCST42BK CLCST42BK Solid Top Panel 48 CLCST48BK CLCST48BK CLCST48BK CLCST48BK Step 3 Solid Bottom Panel 36 CLCBP36BK CLCBP36BK CLCBP36BK CLCBP36BK Bottom Panel Brushed Gasket Bottom Panel 36 CLCBG36BK CLCBG36BK CLCBG36BK CLCBG36BK Solid Bottom Panel 42 CLCBP42BK CLCBP42BK CLCBP42BK CLCBP42BK Brushed Gasket Bottom Panel 42 CLCBG42BK CLCBG42BK CLCBG42BK CLCBG42BK Solid Bottom Panel 48 CLCBP48BK CLCBP48BK CLCBP48BK CLCBP48BK Brushed Gasket Bottom Panel 48 CLCBG42BK CLCBG42BK CLCBG42BK CLCBG42BK Step 4 Accessories Single solid side panel for 42 and 42 inch depth cabinets CLCSP42BK CLCSP42BK CLCSP42BK CLCSP42BK Cable manager security plate (includes 12 plates, 54 screws, 1 hex key) CLCCMSP CLCCMSP CLCCMSP CLCCMSP Cable manager security cover (includes 2 covers, 4 screws, 1 hex key) CLCCMSC CLCCMSC CLCCMSC CLCCMSC Right-hand door hinge kit. CLRHHNG CLRHHNG CLRHHNG CLRHHNG Cable Tray works as a top cable tray and hides cables view. CLCTRAY CLCTRAY CLCTRAY CLCTRAY Replacement Combination Lock Handle CLHAN-01 CLHAN-01 CLHAN-01 CLHAN-01 Cabinet Baying/Ganging/Joining Kit GKIT GKIT GKIT GKIT 8

9 CLCH Series - Cabinet System with Passive Airflow Chimney A popular and cost-effective method of containing heat produced by IT equipment is through a passive hot air chimney. The chimney is fastened to the top-rear of the cabinet and directs hot air from the cabinet into a ducted plenum (lowered T-bar ceiling). The main purpose of the chimney is to prevent the hot air from mixing with the cool air entering the front of the cabinets. Preventing hot air from mixing with cold air is important as it can increase your cooling efficiencies and eliminate the need for additional cooling. In some cases it can eliminate the demand on the facility CRAC or CRAH units resulting in significant operating costs. Features Constructed in 14 gauge welded steel frame; 16 gauge doors and side panel. Doors include 4-pin combination lock with key override. Solid rear door includes gasket material to prevent air leakage. Cabinet top includes brushed entry and optional cable trough accessories. Finished in rugged textured black powder paint. Also available in textured white upon request. Tested to nearly double the suggested load rating of 1,800 lbs. Included unassembled adjustable height (up to ) chimney (ships inside of cabinet). Overall Dimensions Rack Units Mounting Dimensions Height Height Width Depth Per Bay (Per Bay) Width Depth CLCH1B36BK 1-Bay U CLCH1B42BK 1-Bay U CLCH1B48BK 1-Bay U CLCSP36BK CLCSP42BK CLCCMSP CLCCMSC CLCTRAY Single solid side panel for 36 inch depth cabinets Single solid side panel for 42 and 42 inch depth cabinets Cable manager security plate (includes 12 plates, 54 screws, 1 hex key) Cable manager security cover (includes 2 covers, 4 screws, 1 hex key) Cable Tray works as a top cable tray and hides cables view. CABINETS TCS Series - Thermal Containment System Hammond is pleased to introduce our new cost-effective Thermal Containment System (TCS Series). The TCS Series is a factory customized panel system that is used to reduce or eliminate hot air and cold air from mixing. Typically used in new data centers, the TCS series can be customized for to fit any ceiling height. By implementing thermal containment a facility manager can increase cooling efficiencies and reduce facility operating costs. The TCS Series was designed to fit our CLC Cabinet Series (shown on this page) and can be installed upon cabinet delivery or added during future facility upgrades. Specifications: Extruded aluminium panel frames. Lightweight multi-wall polycarbonate panel has been fire rated to CAN/ULC-S102.2 specifications. Foam used throughout containment assembly has been fire rated to UL94HF1 specifications. Aisle doors include integrated ball barring nylon wheel for ease of movement. Panels include fire rated gasket material for air tight seal. Sliding Door is finished in textured black powder paint. Ask your Hammond representative for more details or visit 9

10 C4 Series - Pre-Configured and Modular Data Center Cabinet System Features: Constructed of: 14 gauge steel (body). 16 gauge steel (doors and side panels). 10 gauge tapped rails, 12 gauge square hole punched rails. Mounting Rails: Zinc-plated mounting rails provide superior surface areas for equipment grounding. EIA-310-D compliant tapped or square hole punched rails with rack unit labels. Rails are easy to move within the cabinet and are infinitely adjusting. The 30 wide C4 rails have cable-tie support and pass-through holes. Top panel optional include: Solid Vented Fan cutouts Pre-installed fan(s) capable of up to 550 CFM CABINETS PRE-CONFIGURED CABINETS: When you need cabinets quickly, our pre-assembled C4RR are a great option. Based off of our most popular requested configurations, each cabinet is factory configured and is packaged ready-to-ship. Side panels: Available in both solid and vented for thermal induction. Doors available in: Solid Tinted Acrylic Perforated Split Perforated (Barn Door) Q-Assembly helps you easily create a bill of materials for the cabinet size and the components you desire. Once complete, submit your configuration for quoting. The 30 wide C4 includes: Generous cabling space Four (4) 3.5 wide cable entry holes on the top Support for up to four optional 4 deep vertical cable managers Vertical cable managers feature magnetic latching doors, and 3.5 wide x 4 deep cable space. Vertical cable trays are available for both 24 and 30 width cabinets. Complies with Seismic UBC Zone-4 standards when used with C4K-Z4 Seismic Bolt Down Kit. Four (4) levelling feet are included with support for optional casters. Starter pack of Screws (and cage nuts when applicable). Grounding studs provided on frame as well as side panels and doors. Finished in textured black powder paint. Suggested load capacity of 2,000 lb. C4RR D Series Specific Components: Two (2) Pairs of adjustable square hole rails One (1) Plexi Front Door One (1) Perforated Rear Door One (1) Fan cutout Top Panel One (1) Vertical Tray with PDU Mounting C4RR D Series: Overall Dimensions Rack Mounting Depth Height Width Depth Units Height Width Depth C4RR247331DBK U C4RR247336DBK U C4RR247342DBK U C4RR247731DBK U C4RR247736DBK U C4RR247742DBK U C4RR307731DBK U C4RR307736DBK U C4RR307742DBK U C4RR S Series Specific Components: Two (2) Pairs of adjustable square hole rails One (1) Perforated Front Door One (1) Split Perforated Rear Door One (1) Fan cutout Top Panel Two (2) Vertical Trays with PDU Mounting All configurations include: One (1) Welded C4 Cabinet Frame with Top Cable Entry Holes Two (2) Removable Side Panels (with 1/4 turn latches) C4RR S Series: Overall Dimensions Rack Mounting Depth Height Width Depth Units Height Width Depth C4RR247331SBK U C4RR247336SBK U C4RR247342SBK U C4RR247731SBK U C4RR247736SBK U C4RR247742SBK U C4RR307731SBK U C4RR307736SBK U C4RR307742SBK U

11 DCZ4 Series - Telcordia GR-63 Seismic Zone 4 Certified Cabinet Features: 14 gauge steel (body), 12 gauge steel corner braces and 16 gauge doors and side panels. 19 EIA-310-D compliant tapped or square hole punched rails. (Rails include rack unit labels) Rugged design engineered to perform in the most critical seismic environments when secured using C4K-Z4 seismic bolt down kit. Includes generous stud locations for grounding and bonding applications. Compatible with standard C2 top panels with options that include Solid, Vented, Fan cutouts. Pre-installed fan(s) capable of up to 550 CFM. Flush-mount doors come with 3-point latching and stiffeners to reduce flexing and bowing while increasing cabinet security. Doors available in Solid, Window and 63% Perforated punch pattern. Handle features 4-pin combination lock with key override. Also compatible with electronic locking options. Ganging holes allow for joining multiple cabinets. Finished in sand-textured black powder paint. Cable Management: Includes four (4) 3.5 top cable access holes. Various bottom panels allow different cable management options. Corner braces include mounting for cable tray and outlet strips. Support for up to four optional 4 deep vertical cable managers. Pre-Assembled Cabinet: One (1) DCZ4F307742BK - DCZ4 Cabinet Frame Two (2) C4PR77SZPL - Pair of Square Hole Rails Two (2) DCZ4SP7742BK - DCZ4 Side Panels Two (2) DCZ4VD3077BK - DCZ4 63% Vented Doors One (1) C2T2436SBK1 - Standard C2 Solid Top Panel Independently tested and certified to exceed established Seismic Zone 4 Telcordia GR-63-CORE testing standards. Watch the seismic test on our website or scan the QR Code above. Dynamic (seismic) suggested load capacity of 1,000 lb. (453.6 kg) of equipment installed and 100 lb. (45.4 kg) of overhead cable weight when secured using the C4K-Z4 seismic bolt down kit. CABINETS Overall Dimensions Rack Mounting Depth Height Width Depth Units Height Width Depth DCZ4A307742BK U Also sold in individual components. Visit for more details. Electronic Locking When network security is a priority and a mechanical locking mechanism will not suffice, have peace of mind that Hammond has options to increase your cabinet infrastructure security. Hammond has formed a partnership with handle manufacturers Southco and TZ to ensure the Hammond cabinets are compatible with their state-of-the-art access control systems. Whether your facility requires standard audit trail, proximity access or military spec biometrics, both latching systems provide you a level electronic access control that can integrate into your network or facility security system. The electronic locking rack handle provides the functionality of a manual latching system with the added benefit of electronic locking for access control and remote monitoring. It can be combined with any access control device for a basic self-contained electronic access solution. The Hammond CLC, DC100 and DCZ4 Cabinet Series have been designed to be compatible with both latching systems. TZ Locking mechanisms are compatible with most Hammond cabinets and enclosures. Ask your representative for details. Southco and TZ trademarks and copyrights are property of their respective owners. 11

12 EN4SD Series - NEMA 4/12 Swing Out Wall Mount Cabinet Constructed of 14 gauge steel. Smooth continuous welded seams without knockouts, cutouts or holes. Includes one (1) pair of adjustable EIA compliant tapped 19 mounting rails. Mounting rails also include cable pass through holes. Heavy wall mounting base for cable entry with collar stud provision for optional inner panel. Wall base can be mounted with optional external mounting feet. Interior latch releases center section for added security, no tools required. Solid and Window door are provided with 2 or 4 point combination key & padlock handle. Bonding studs provided on door, body and wall base. Window door constructed with UV resistant polycarbonate material. Finished in RAL7035 light Gray. Solid Door Window Door Overall Dimensions Rack Mount Center Height Width Depth Units Height Depth EN4DH162415LG EN4DH162415WLG U EN4DH202415LG EN4DH202415WLG U EN4DH242415LG EN4DH242415WLG U EN4DH362415LG EN4DH362415WLG U EN4DH482415LG EN4DH482415WLG U EN4DH162424LG EN4DH162424WLG U EN4DH202424LG EN4DH202424WLG U EN4DH242424LG EN4DH242424WLG U EN4DH362424LG EN4DH362424WLG U EN4DH482424LG EN4DH482424WLG U EN4SD Series - NEMA 4/12 Wall Mount Cabinet with Optional Swing Frame INDUSTRIAL IT Shown with optional Swing Frame (ESF Series) installed. Some assembly is required. Constructed of 14 gauge steel. Smooth continuous welded seams without knockouts, cutouts or holes. Optional Swing frame is constructed of 12 gauge steel, painted smooth black and includes EIA compliant round hole mounting (for use with clip nuts). Solid and Window door options are provided with a quarter turn latch. Order 2WKL to upgrade the front door to a Locking Wing Knob. Bonding studs provided on door, body and wall base. Window door constructed with UV resistant polycarbonate material. Finished in RAL7035 light Gray. Solid Door Window Door Overall Dimensions Optional Swing Frame Height Width Depth Rack Units EN4SD24246LG EN4SD24246WLG ESF U EN4SD24248LG EN4SD24248WLG ESF U EN4SD30248LG EN4SD30248WLG ESF U EN4SD36248LG ESF U EN4SD242412LG EN4SD242412WLG ESF U EN4SD302412LG EN4SD302412WLG ESF U EN4SD362412LG ESF U EN4SD242416LG EN4SD242416WLG ESF U EN4SD302416LG ESF U EN4SD242420LG EN4SD242420WLG ESF U EN4SD302420LG EN4SD302420WLG ESF U EN4SD302424LG ESF U Are you looking for the factory finish? We can help! When a standard product or assembly just won t do, Hammond can design a product modified to your specifications. Modification means we use a standard Hammond design and build it to your requirements. While we can customize the product features, you aren t paying for a custom price. Learn more on page

13 PCJ Series - Type 4X Non-Metallic Enclosures for Wireless Access Points Designed to insulate and protect wireless access points in both indoor and outdoor conditions. The wall mounting flange provides easy mounting to walls and surfaces. Constructed of rugged polycarbonate thermoplastic enclosure with matching cover. Enhanced UV inhibitors protect against outdoor weathering. Threaded brass inserts are for optional inner panel mounting. Mounting hardware is included. Door fasteners include a provision for padlocking on Snap Latches. Molded hinge with 316 stainless steel pin. Captive oil resistant gasket provides a positive seal. Operating temperatures between 130 C and - 35 C (266 F to - 31 F). Polycarbonate material has a light gray finish. Solid Door Window Door Overall Dimensions Panel/Equipment Dimensions Optional Inner Panel Height Width Depth Height Width PCJ664LF PCJ664CCLF PCJA0505 PCJ864LF PCJ864CCLF PCJA0705 PCJ1084LF PCJ1084CCLF PCJA0907 PCJ12106LF PCJ12106CCLF PCJA1109 PCJ14126LF PCJ14126CCLF PCJA1311 Inner panel is constructed of type 5052 H-32 aluminium. HDME Series - Type 12 Dust Tight Cabinet The Hammond Data Modular Enclosure (HDME) System provides a vast array of features and advantages supported by Hammond Manufacturing s reliable quality and service. The HDME product line combines the rugged NEMA 12 housing of the Hammond HME Series with a Data/Comm designed configuration to serve you dust-tight requirements. The modular design permits interchangeable components and ability to join cabinets together while maintaining an industrial dust-tight seal. Configuration One (1) Welded frame with pre-installed leveling feet One (1) Removable solid top panel with mounting points for optional lifting eye-bolts Two (2) Pairs of EIA-Compliant Square Hole Rails One (1) Removable bottom panel w/gland plates Two (1) Solid doors with die-cast swing handle along with pre-installed gland plates Construction Formed 14 gauge steel. Fully welded frame with 25mm hole pattern for superior mounting flexibility. Seamless foam in place gasket. Frames can be joined together with an optional joining kit. Doors can be easily removed, reversed, and/or interchanged. Bonding and grounding studs are provided for all doors and panels. INDUSTRIAL IT Finish Phosphatized and finished in textured black powder coating. Mounting Rails are unpainted galvanized 12 gauge steel. Shown with optional NEMA 12 Filter Fan installed. Side panel removed for demonstration purposes only. To learn more about our NEMA 12 Data/Comm Configurations, please contact your local Hammond Representative. 13

14 ACCESSORIES 2-Post Mounting Shelves: Rack Depth Mount Rated Units (in) Depth (lbs) RASU190107UBK1 Solid Rack Shelf 1U RASU190115BK1 Solid Rack Shelf 1U RASU190315BK1 Solid Rack Shelf 2U RASU190320BK1 Solid Rack Shelf 2U RASU190515BK1 Solid Rack Shelf 3U RASV190107UBK1 Vented Rack Shelf 1U RASV190115BK1 Vented Rack Shelf 1U RASV190315BK1 Vented Rack Shelf 2U RASV190320BK1 Vented Rack Shelf 2U RASV190515BK1 Vented Rack Shelf 3U RASV190520BK1 Vented Rack Shelf 3U RACSV190315BK1 Clamping Rack Shelf 2U RACSV190515BK1 Clamping Rack Shelf 3U RACSV190715BK1 Clamping Rack Shelf 4U DNDMS19BK1 Centered Solid Shelf 2U DNDMV19BK1 Centered Vented Shelf 2U RDAB2U15 Centered Depth Adapter 2U RDAB2U20 Centered Depth Adapter 2U RDAB2U26 Centered Depth Adapter 2U RDAB2U31 Centered Depth Adapter 2U RDA1U4 Rail Depth Adapter 1U RDA2U4 Rail Depth Adapter 2U Post Mounting Shelves & Drawers: RSVS1918BK1 Sliding Vented Shelf 1U RSVS1921BK1 Sliding Vented Shelf 1U RSVS1926BK1 Sliding Vented Shelf 1U RSUS1918BK1 Sliding Solid Shelf 1U RSUS1921BK1 Sliding Solid Shelf 1U RSUS1926BK1 Sliding Solid Shelf 1U RSLIDEEX Increases RSVS/ RSUS Mounting-Depth by 14 in RMASU1925BK1 Adjustable Solid Shelf 1U RMASUHD1925BK1 Adjustable Solid Shelf 2U RMASU1930BK1 Adjustable Solid Shelf 1U RMASV1925BK1 Adjustable Vented Shelf 1U RMASVHD1925BK1 Adjustable Vented Shelf 2U RMASVHD1936BK1 Adjustable Vented Shelf 2U RAAB2436BK Adjustable Angle Bracket 1U RAAB3648BK Adjustable Angle Bracket 1U RDRW BK1 Locking Rack Drawer 2U RDRW BK1 Locking Rack Drawer 2U RDRW BK1 Locking Rack Drawer 3U RDRW BK1 Locking Rack Drawer 4U RAKS19BK1 Keyboard Drawer 2U RSKS19005BK1 Swivel Keyboard Shelf 2U lb RMS193BK1 3-in-1 Shelf and Keyboard Drawer 3U We have a huge selection of standard accessories to choose from. Take a look at Screw and Cage Nut Combo Pack Mounting Hardware Filler Panels Qty Tap 1421CNABK CNABK Qty Tap Type 1421ABK Screws 1421ABK Screws 1421ABK Screws H1032BK Screws H1032BK Screws H1032BK Screws 1421CNA Cage Nuts 1421CNA Cage Nuts 1421CNA Cage Nuts 1421N Clip Nuts 1421N Clip Nuts 1421N Clip Nuts H1224S Screws H1224S Screws H1224S Screws 1421CNC Cage Nuts 1421CNC Cage Nuts Improve cooling efficiency and visual appearance with blanking/ filler panels. Available from 1U to 18U in a variety of colours, materials and configurations. PBPS19001BK2 1U Solid Steel Panel PBPS19003BK2 2U Solid Steel Panel PBPS19005BK2 3U Solid Steel Panel PPFS19001BK2 1U Steel Perforated Panel PPFS19003BK2 2U Steel Perforated Panel PPFS19005BK2 3U Steel Perforated Panel PBFS19001BK2 1U Formed Solid Steel Panel PBFS19003BK2 2U Formed Solid Steel Panel PBFS19005BK2 3U Formed Solid Steel Panel PBPA19001BK2 1U Aluminum Solid Panel PBPA19003BK2 2U Aluminum Solid Panel PBPA19005BK2 3U Aluminum Solid Panel PVSS19001BK2 1U Steel Slotted Panel PVSS19003BK2 2U Steel Slotted Panel PVSA19001BK2 1U Aluminum Slotted Panel PVSA19003BK2 2U Aluminum Slotted Panel Brushed Horizontal Cable Manager BRP1UBK 1U Brushed Panel BRP2UBK 2U Brushed Panel Rack Mount Monitor Rack Heavy duty 12 gauge steel. 3U for small screens U for large screens 32 and up. Includes monitor screws. Black powder paint finish. RMMB193UBK3 3U - VESA MIS-D RMMB1910UBK3 10U - VESA MIS-F 14

15 Horizontal Cable Management RB-HRM1 1U Econo Horizontal Ring Manager RB-HRM2 2U Econo Horizontal Ring Manager PCMBS19001BK1 1U Horizontal Ring Manager PCMBS19003BK1 2U Horizontal Ring Manager PCMDD19001BK1 1U Horizontal Hinged PCMDD19003BK1 2U Horizontal Hinged PCMDD19005BK1 3U Horizontal Hinged Fan Components DNFK1AC120 DNFK2AC120 Single (1) Fan kit with grills and cord CFM Dual (2) Fan kit with grills and cord CFM PCMDS19001BK1 1U Horizontal Hinged Metal Finger PCMDS19003BK1 2U Horizontal Hinged Metal Finger PCMDS19005BK1 3U Horizontal Hinged Metal Finger RDCM2136BK RDCM3348BK 2U Adjustable Depth Cable Manager 2U Adjustable Depth Cable Manager PCMBV19001BK1 1U Horizontal Hook & Loop CLB194BK CLB192BK CLB190BK 0U 4 Deep Lacing Bar (10-Pack) 0U 2 Deep Lacing Bar (10-Pack) 0U Lacing Bar (10-Pack) Rack Mount Fan Trays 1U 19 Rack Mount Fan Trays Ideal solution for hot spots Integral finger guards Circuit breaker protection Black powder paint finish Max Mount Depth FT300HA1BK 3-Fan,300 CFM, ON/OFF Switch Unlimited FT600HA1BK 6-Fan,600 CFM, ON/OFF Switch 19.2 FT900HA1BK 9-Fan,900 CFM, ON/OFF Switch 24.7 HCM194BK HCM192BK HCM190BK HCM190UBK1 PCMT19003BK1 0U 4 Deep L-Bar (10-Pack) 0U 2 Deep L-Bar (10-Pack) 0U L-Bar (10-Pack) 0U Lacing Bar with 48 length of Hook and Loop 2U Rack Panel Mount Trough Casters and Dollies Weight Rating (lb) Height Added (in) RRLDCASTER Open Frame Rack Casters BM Medium Duty Cabinet Casters PHD Medium Duty Cabinet Casters BH Heavy Duty Cabinet Casters TS96 96 length strip of Hook and Loop Vertical Cable Management FRCM44U88 44U 8 x 8 Dual-Door Metal Finger FRCM44U128 44U 12 x 8 Dual-Door Metal Finger FRCMCD Tooless Metal Cable Divider FRCMSPOOL Tooless Metal Cable Spool CMRC34BK1 1.5 x 3 x 4 Cable Ring CMRC36BK1 1.5 x 3 x 6 Cable Ring CMRC126BK1 1.5 x 12 x 6 Cable Ring RRCM44UD 44U 6 x 5 Hinged Door RRCM844UD 44U 8 x 6 Hinged Door RRCM1244UD 44U 12 x 6 Hinged Door CMRBK1 1U Single Cable Ring Wide CMR3BK1 1U Single Cable Ring Wide CMRB 1U Tie Down Rack VCT28 16U Universal Cable Tray VCT42 24U Universal Cable Tray VCTPDU73 42U Tooless PDU Cable Tray VCTPDU77 44U Tooless PDU Cable Tray VCTPDU78 45U Tooless PDU Cable Tray FRCMCH88 36 High Cable Chimney for FRCM FRCMCH High Cable Chimney for FRCM RRCMCH65 36 High Cable Chimney for RRCM RRCMCH86 36 High Cable Chimney for RRCM RRCMCH High Cable Chimney for RRCM Copper Busbar 19 and 23 mounting widths. Includes (2) Ø 0.31 ground lug holes. Mounts directly to EIA mounting rails. Constructed of Solid Copper Bar. Includes (10) drilled and tapped holes spaced at 1. GRDBAR19 GRDBAR23 Rack Unit Label RULBK Universal Rack Unit Label - up to 49U 19 Horizontal Rack Mount Copper Busbar 23 Horizontal Rack Mount Copper Busbar Ground Lug DNGL Dual L16 type aluminum lug DIN Rail Rack Bracket 19 mounting widths. Includes wide DIN Rail. Mounts directly to EIA mounting rails. Slots allow front/back adjustments of DIN rail. RMAD19003BK 19 DIN Rail Rack Bracket ACCESSORIES 15

16 ACCESSORIES Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide All Outlet Strips on this page include a 125 VAC circuit breaker, use 1U (1.75 ) panel space, and are finished in black. # of Outlets Power Indication Pilot Light Only Cord Length Plug Type Amp Rating Surge Finish Front Rear Switch 15A Outlet Strip with FRONT Mounted Receptacles 1582H6A1BK 6 - Illuminated - 6ft 5-15P 15A - Black 1582H6B1BK 6 - Illuminated - 15ft 5-15P 15A - Black 1582H8A1BK 8 - Illuminated - 6ft 5-15P 15A - Black 1582H8B1BK 8 - Illuminated - 15ft 5-15P 15A - Black 1582T6A1BK Yes 6ft 5-15P 15A - Black 1582T6B1BK Yes 15ft 5-15P 15A - Black 1582T8A1BK Yes 6ft 5-15P 15A - Black 1582T8B1BK Yes 15ft 5-15P 15A - Black 15A Outlet Strip with REAR Mounted Receptacles 1583H6A1BK - 6 Illuminated - 6ft 5-15P 15A - Black 1583H6B1BK - 6 Illuminated - 15ft 5-15P 15A - Black 1583H8A1BK - 8 Illuminated 6ft 5-15P 15A - Black 1583H8B1BK - 8 Illuminated 15ft 5-15P 15A - Black 1583T6B1BK Yes 15ft 5-15P 15A - Black 1583T8A1BK Yes 6ft 5-15P 15A - Black 1583T8B1BK Yes 15ft 5-15P 15A - Black (Front) 1583H6A1SBK - 6 Illuminated - 6ft 5-15P 15A Yes Black 1583H6B1SBK - 6 Illuminated - 15ft 5-15P 15A Yes Black 15A Outlet Strip with FRONT AND REAR Mounted Receptacles 1583H6A1BKX 2 4 Illuminated - 6ft 5-15P 15A - Black 1583H6B1BKX 2 4 Illuminated - 15ft 5-15P 15A - Black 1583T6A1BKX Yes 6ft 5-15P 15A - Black 1583H12A1BKX 6 6 Illuminated - 6ft 5-15P 15A - Black 1583H12B1BKX 6 6 Illuminated - 15ft 5-15P 15A - Black (Rear) 1583T12A1BKX Yes 6ft 5-15P 15A - Black 15A Outlet Strip with 90 Degree Offset Receptacles 1582H6A1BKRA 6 - Illuminated - 6ft 5-15P 15A - Black 1582H6B1BKRA 6 - Illuminated - 15ft 5-15P 15A - Black 1582T6A1BKRA Yes 6ft 5-15P 15A - Black 1582T6B1BKRA Yes 15ft 5-15P 15A - Black 1583T12A1SBKRAX Yes 6ft 5-15P 15A Yes Black 1583H6A1BKRA - 6 Illuminated - 6ft 5-15P 15A - Black 1583H6B1BKRA - 6 Illuminated - 15ft 5-15P 15A - Black 1583T6A1BKRA Yes 6ft 5-15P 15A - Black 1583T6B1BKRA Yes 15ft 5-15P 15A - Black 20A Outlet Strips with FRONT OR REAR-Mounted Receptacles 1589H6D1BKRF 6 - No Light - 15ft L5-20P 20A - Black 1589H6F1BKRF 6 - No Light - 6ft 5-20P 20A - Black 1589H6G1BKRF 6 - No Light - 15ft 5-20P 20A - Black 1589H8G1BKRF 8 - No Light - 15ft 5-20P 20A - Black 1589T6D1BKRF Yes 15ft L5-20P 20A - Black 1589T6G1BKRF Yes 15ft 5-20P 20A - Black 1589T8F1BKRF Yes 6ft 5-20P 20A - Black 1589H6D1BKRR - 6 No Light - 15ft L5-20P 20A - Black 1589H6F1BKRR - 6 No Light - 6ft 5-20P 20A - Black 1589H6G1BKRR - 6 No Light - 15ft 5-20P 20A - Black 1589H8G1BKRR - 8 No Light - 15ft 5-20P 20A - Black 1589T6D1BKRR Yes 15ft L5-20P 20A - Black 1589T6F1BKRR Yes 6ft 5-20P 20A - Black 1589T6G1BKRR Yes 15ft 5-20P 20A - Black 15 & 20A Outlet Strip with built-in Ammeter 1582H6A1BKAM 6 - Illuminated - 6ft 5-15P 15A - Black 1583H6A1BKAM - 6 Illuminated - 6ft 5-15P 15A - Black 1583T6A1BKAM Yes 6ft 5-15P 15A - Black 1583T6B1BKAM Yes 15ft 5-15P 15A - Black 1589H6F1BKRRAM - 6 No Light - 6ft 5-20P 20A - Black 1589T6C1BKRRAM Yes 6ft L5-20P 20A - Black 1589T6F1BKRRAM Yes 6ft 5-20P 20A - Black With over 500 skus of Outlet Strips, we could not possibly add them all into this product guide. For additional sizes and options, please visit 16

17 # of Overall Cord Surge Plug Amp Pilot Light On/Off Switch Outlets Length Length Protection Type Rating Finish 15A Vertical Outlet Strips 15851T6A H6A ft No 5-15P 15A Silver 15851T6B H6B ft No 5-15P 15A Silver 15852T8A H8A ft No 5-15P 15A Silver 15852T8B H8B ft No 5-15P 15A Silver 15853T6A H6A ft No 5-15P 15A Silver 1585T8A1 1585H8A1 8 48" 6ft No 5-15P 15A Silver 1585T10A1 1585H10A " 6ft No 5-15P 15A Silver 1585T10B1 1585H10B " 15ft No 5-15P 15A Silver 1585T10B1S 1585H10B1S ft Yes* 5-15P 15A Silver 1586T10A1 1586H10A ft No 5-15P 15A Silver 1586T10B1 1586H10B ft No 5-15P 15A Silver 1586T12A1 1586H12A ft No 5-15P 15A Silver 1587T10A1 1587H10A ft No 5-15P 15A Silver 1587T12A1 1587H12A ft No 5-15P 15A Silver 1587T12C1 1587H12C ft No L5-15P 15A Silver 1587T12D1 1587H12D ft No L5-15P 15A Silver 1588T12A1 1588H12A ft No 5-15P 15A Silver 1588T12A1BK 1588H12A1BK ft No 5-15P 15A Black 1588T12B1BK 1588H12B1BK ft No 5-15P 15A Black Includes hardware required to mount to a cabinet, unistruts or open frame racks. Additional kits can be purchased by ordering 1585CLIP 20A Vertical Outlet Strips 1589T48D1 1589H48D1 8 48" 15ft No L5-20P 20A Silver 1589T48F1 1589H48F1 8 48" 6ft No 5-20P 20A Silver 1589T48G1 1589H48G1 8 48" 15ft No 5-20P 20A Silver 1589T48D H48D " 15ft No L5-20P 20A Silver 1589T48F H48F " 6ft No 5-20P 20A Silver 1589T48G H48G " 15ft No 5-20P 20A Silver 1589T60C1 1589H60C " 6ft No L5-20P 20A Silver 1589T60D1 1589H60D " 15ft No L5-20P 20A Silver 1589T60F1 1589H60F " 6ft No 5-20P 20A Silver 1589T60G1 1589H60G " 15ft No 5-20P 20A Silver 1589T70C1 1589H70C " 6ft No L5-20P 20A Silver 1589T70D1 1589H70D " 15ft No L5-20P 20A Silver 1589T70F1 1589H70F " 6ft No 5-20P 20A Silver 1589T70G1 1589H70G " 15ft No 5-20P 20A Silver 1589T70D H70D " 15ft No L5-20P 20A Silver 1589T70F H70F " 6ft No 5-20P 20A Silver 1589T70G H70G " 15ft No 5-20P 20A Silver 1589T77C1 1589H77C " 6ft No L5-20P 20A Silver 1589T77D1 1589H77D " 15ft No L5-20P 20A Silver 1589T77F1 1589H77F " 6ft No 5-20P 20A Silver 1589T77G1 1589H77G " 15ft No 5-20P 20A Silver When mounting to HWM series use HWMPCLIP See page 9 for details. Are you looking for an IP Managed or enhanced PDU? Our alliance with power distribution industry leaders gives you access to the products you need, mounted within the Hammond Cabinet you trust. If we do not have an outlet strip that meets your needs, we can help find you one that will. Please contact your Hammond Mfg representative for more information. 15A Industrial & Commercial Grade Outlet Strip Power Indication # of Outlets Lighted On/Off Switch Pilot Light Only Surge Protection Cord Length Plug Type Amp Rating Finish 1584H6A1 6 Yes - No 6ft 5-15P 15A Black 1584H6A1S 6 Yes - Yes 6ft 5-15P 15A Black 1584H6B1 6 Yes - No 15ft 5-15P 15A Black 1584H6B1S 6 Yes - Yes 15ft 5-15P 15A Black 1584H8A1 8 Yes - No 6ft 5-15P 15A Black 1584H8B1 8 Yes - No 15ft 5-15P 15A Black 1584T6A1 6 - Yes No 6ft 5-15P 15A Black 1584T6A1S 6 - Yes Yes 6ft 5-15P 15A Black 1584T6B1 6 - Yes No 15ft 5-15P 15A Black 1584T8A1 8 - Yes No 6ft 5-15P 15A Black 1584T8B1 8 - Yes No 15ft 5-15P 15A Black ACCESSORIES 17

18 When a standard product just won t do! When a standard product just won t do, Hammond can design a product modified to your specifications. Modification means we are building off of a standard Hammond product. While we can customize the product features, you aren t paying for a custom price. See our five (5) modification options below as well as modifications that we have built for other customers. PAINT / COLOUR HOLES / CUTOUTS BONDING / STUDS SIZE CHANGES OTHER OPTIONS Choose from one of over 10 stock colour options, or provide us with a CMYK, RGB, Pantone or RAL colour code to match. Precision punching and laser equipment can insert optional Knockouts, venting and unique patterns. Forget the hassle of field installation. Choose from mounting options, ground, bonding and PEM studs and nuts. Whether you have a drawing on a napkin or a CAD drawing. If you required specific product dimensions and features we can help! We can factory install shelving, fans, outlet strips, apply screen printing and drop ship the product, neatly packed on a skid. Based on the Hammond C2 Cabinet Series Based on the Hammond C4 Cabinet Series Based on the Hammond HWM Swing Out Wall Mount Cabinet Series 18

19 Over 80 Years of Quality Racks & Cabinets Hammond Manufacturing Co. Ltd., provides voice, data, and security products and service solutions that optimise, store, and secure technology equipment. Hammond manufactures and markets cabinet, enclosure systems and accessories; security systems, such as electronic locking systems; and grounding and bonding products. The company also offers power management products that include power distribution units, power strips, and in-line meters; two and four-post racking systems; and wall-mount open and enclosed systems. Its products are used in physical security, system integration, and regulatory compliance applications in government, education, finance, retail, healthcare, manufacturing and data center sectors. Hammond markets its products through a network of distributors, contractors and integrators worldwide. Global Headquarters and Metal Fabrication Facility Guelph, Ontario, Canada US Facility, Sales and Distribution Center Cheektowaga, New York, USA Quebec Sales Office Laval, Quebec, Canada With our Global Headquarters and metal fabrication facility in Guelph, Ontario, Canada; Hammond has additional manufacturing facilities in the United States, Asia, and Europe. To support our global customer base we have sales offices and distribution facilities in Canada, US, China, Australia and the UK. 19