FREE-STANDING CABINETS

Transcription

1 FREE-STANDING CABINETS Free-standing cabinets serve as a versatile solution to protect data communications equipment in a data center, a factory environment, or in a modular work station. No matter what your requirement, Hoffman has a standard cabinet to suit your specifications. Select from our most frequently requested configurations or design your own solution. Further customize your enclosures from a broad range of accessories to meet your specific needs. New And Featured Products NET SERIES Hoffman s Net Series A DataCom Cabinet for All Reasons With Net Series Cabinets you get versatility, economy, performance, and fast delivery all in one easy-to-order package. Wider PROLINE ConnecTek TM Patch Cabinets Give More Room to Work The new 800mm wide PROLINE ConnecTek Network Communications (Patch) Cabinets offer all the same thermal management capabilities as 700mm models, plus more room for cables, patch cords, and network equipment. PROLINE FloTek TM Floor Ducted Server Cabinets Support Smart Thermal Management in Raised Floor Data Centers PROLINE FloTek FD Server Cabinet Packages feature an integral floor duct positioned over a cutout in the raised floor plenum (required), which directs air into the server intakes. Models available with and without sides to address ganged and stand alone applications. PROLINE ConnecTek Patch Cabinet PROLINE FloTek TM Floor Ducted Server Cabinet 2 Subject to change without notice PH FX Hoffman Enclosures Inc.

2 NEW INDEX Bases and Levelers, PROLINE 65 Cabinet Configurator, PROLINE 34 Colocation Server Cabinet and Accessories, PROLINE-CL 32 ConnecTek Communications (Patch) Cabinet, PROLINE 10 Door Accessories, PROLINE 62 Fans and Vent Tops, PROLINE 64 FloTek FD (Floor Ducted) Cabinet, PROLINE 18 FloTek HCA (Hot/Cold Aisle) Server Cabinet, PROLINE 16 FloTek PC (Passive Cooling) Server Cabinet, PROLINE 12 FloTek RA (Random Active) Top Exhaust Server Cabinet, PROLINE 14 Frame Components, PROLINE 52 Grid Systems, PROLINE 54 Mini-Rack Cabinet, 19-inch 40 Mini-Rack Cabinet Components, 19-inch 42 Mini-Rack Cabinet Accessories, 19-inch 45 Net Series Communication and Server Cabinets 6 Net Series Communication and Server Cabinet Accessories 8 Networking PC Cabinet and Accessories 38 Rack Angles and Brackets, PROLINE 56 Rack Cabinet, 19 in. 46 Rack Cabinet Components and Accessories, 19 in. 48 Selection Guide, Free-Standing Cabinet 4 Server Cabinet, PROLINE 22 SOHO Cabinet for Small Offices and Home Offices 36 Swing-Out Racks, PROLINE 58 Voice/Data and Server Cabinets with Fan and Filter Package, PROLINE Type 1 26 Voice/Data and Server Cabinets, PROLINE Type Voice/Data Cabinet, PROLINE 24 Free-Standing Cabinets Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 3

3 For Every Application, There s A Hoffman DataCom Solution Fr e e-sta n d i n g Ca b i n e t s Description CABINET SERIES Models Net Series Page 6 Server & Voice/Data SEISMIC Page 158 Seismic PROLINE Page 22 Server PROLINE Page 32 Colocation PROLINE Page 10 ConnecTek Application Density General DataCom Computer Room Low Density Seismic Zones Network & Battery Low Density Data Center Low Density Data Center Multiple Tenants Low Density Data Center Network Equipment Low Density DIMENSIONS Rack Units 21 to to 42 1 to 4 compartments 42 Height 47.24" or 84.00" 84.05" 50.75" or 82.30" 78.70" 78.28" Width Depth 23.52" " 31.50" " 27.55" or 31.50" 31.50" " 23.62" 35.36" " 23.62" 35.43" or 39.37" 27.56" or 31.50" 35.43" " RATINGS Loading Static (Ultimate load testing) Thermal Rating (Watts dissipated) 1,000 lbs Static 2,000 watts 3,000 watts with fans 5,000 lbs Static 2,000 watts 3,000 watts with fans 1,500 lbs Static 2,000 watts 1,500 lbs Static 2,500 watts 1,500 lbs Static 2,500 watts Certifications & Listings STRUCTURE RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) UL 1863 (Static Load Rating) Telcordia GR-63-CORE, NEBS Requirements RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) Front & Back Door Base Reversible, window or perforated front, split perforated, or louvered rear, all with key locks Open Window front, louvered rear with multi-point key lock Open Window perforated front, perforated rear with key lock Open with casters, levelers and anti-tip bracket Perforated front and rear with key locking handle Open with internal bolt brackets Perforated front, split perforated rear with key locking handle Open with internal bolt brackets Top Rack Angles Fan-ready (2" x 6") top with cable cap and grommet 2 sets Communications have tapped Server has square hole Fan-ready (2"x 6") top with cable cap and grommet 2 sets Communications have tapped Server has square hole Removable, fully perforated with cable entry cap and grommet 2 sets Square hole Dash mark (-) at start and stop of RU Various removable tops 2 sets Square hole Dash mark (-) at start and stop of RU Removable perforated with sliding gland plate for cable entry 2 sets Tapped hole Dash mark (-) at start and stop of RU Sides FEATURES Cable Management Power Management Removable with 1/4-turn latch Limited Offering Rack-mount and panelmount PDU s available Removable with 1/4-turn latch and screws Robust Offering Rack-mount and panelmount PDU s available Removable with two snap latches, 1/4-turn key latch ready Robust Offering Rack-mount and panelmount PDU s available No sides or removable sides with two snap latches, 1/4-turn key latch ready Robust Offering Rack-mount and panelmount PDU s available No sides or removable sides with two snap latches, 1/4-turn key latch ready Robust Offering Rack-mount and panelmount PDU s available Unique 19" or 23" rack spacing on Heavy-gauge construction, Cabinet can be rolled into Can be configured in Includes front vertical and 31.5 widths extra welds, heavy-duty place, levelers positioned 1-, 2-, 3- & cable managers with Features washers, 3-point vault-style and anti-tip bracket 4-compartment covers and rear vertical latching attached. Anti-tip bracket, configurations. tie-down cable managers. Telcordia GR-63-CORE, casters, levelers are NEBS Requirements standard. Zone 4 1,100 lbs. Can be used as a battery cabinet. 4 Subject to change without notice PH FX Hoffman Enclosures Inc.

4 For Every Application, There s A Hoffman DataCom Solution Fr e e-sta n d i n g Ca b i n e t s Free-Standing Cabinets PROLINE PROLINE PROLINE PROLINE PROLINE PROLINE Page 12 Page 16 Page 14 Page 18 Page 28 Page 26 FloTek - PC FloTek - HCA FloTek - RA FloTek -FD Server & Voice/Data Server & Voice/Data Data Center Passive Cooling Data Center Hot Aisle-Cold Aisle Data Center Random Active Data Center Floor Ducted Factory Floor Type 12 Factory Floor Type 1 w/ Filter Fan Low Density Medium Density High Density High Density Application-Specific Application-Specific " 78.28" 78.28" 82.30" 82.30" 82.30" 23.62" 23.62" 23.62" 23.62" 27.56" or 31.50" 27.56" or 31.50" 35.43" " 35.43" " 35.43" " 35.43" " 35.43" " 35.43" " 1,500 lbs Static 1,500 lbs Static 1,500 lbs Static 1,500 lbs Static 1,500 lbs Static 1,500 lbs Static 2,500 watts 6,000 watts 3,000 watts 8,000 to 10,000 watts Application-Specific Application-Specific RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) RoHS compliant ISO 9001 EIA (Rack Spacing) UL 508 Type 12 cul Type 12 NEMA/EEMAC Type 12 RoHS compliant ISO 9001 EIA (Rack Spacing) UL 508 Type 1 cul Type 1 NEMA/EEMAC Type 1 Perforated front, split perforated rear with key locking handle Perforated front, split fan rear with key locking handle Perforated front, 1/3 perforated rear with key locking handle Window front, split fan rear with key locking handle Window front, solid door rear with key locking handle Window front, solid door rear with key locking handle Open with internal bolt brackets Open with internal bolt brackets Open with internal bolt brackets Open base with floor duct, casters and levelers Gland plate base with casters and levelers Gland plate base with casters and levelers Perforated with sliding gland plate for cable entry 2 sets Square hole Dash mark (-) at start and stop of RU No sides or removable sides with two snap latches, 1/4-turn key latch ready Removable solid with sliding gland plate for cable entry 2 sets Square hole Dash mark (-) at start and stop of RU No sides or removable sides with two snap latches, 1/4-turn key latch ready Removable 10" fan with sliding gland plate for cable entry 2 sets Square hole Dash mark (-) at start and stop of RU No sides or removable sides with two snap latches, 1/4-turn key latch ready Removable solid with sliding gland plate for cable entry 2 sets Square hole Dash mark (-) at start and stop of RU No sides or removable sides with two snap latches, 1/4-turn key latch ready Removable solid 2 sets Communications have tapped holes Server has square hole Dash mark (-) at start and stop of RU Removable sides with fastening screws Removable pagoda top with high-capacity 10" fan 2 sets Communications have tapped holes Server has square hole Dash mark (-) at start and stop of RU Removable sides with fastening screws Robust Offering Robust Offering Robust Offering Robust Offering Robust Offering Robust Offering Rack-mount and panelmount PDU s available Rack-mount and panelmount PDU s available Rack-mount and panelmount PDU s available Rack-mount and panelmount PDU s available Rack-mount and panelmount PDU s available Rack-mount and panel-mount PDU s available Provides maximum cooling without added fans for Hot Aisle/Cold Aisle and other data center configurations. Ideal for Hot Aisle/Cold Aisle data center configurations in high-density applications. Rear split doors access separately powered banks of fans for redundancy with easy equipment access. Maximum cooling attained by integrating raised floor cool air uniformly to all network equipment. IIntegrates raised floor cool air pathway to the network equipment. Raised floor cut-out required. Configuration offered that is air conditioner-ready (AC cut-out to side). Data-center-within-a-datacenter concept. Fully gasketed to keep out side air infiltration. Pagoda top-mounted fan with lower side intake filters on access panels. Subject to change without notice PH FX Hoffman Enclosures Inc. 5

5 NEW Net Series Communication and Server Cabinets Standard Cabinets DC Construction Welded multi-formed steel frame. The top and columns are 16 gauge; the base is 14 gauge. Multi-formed rigid doors are 14 gauge steel Window made of 1/8 in. smoke tinted acrylic Formed solid sides are 14 gauge steel Rack angles are 12 gauge steel Ground studs provided on doors and covers Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards UL 1863 Listed (perforated, split perforated, and louvered door models only) EIA 310-D IEC 60529, IP20 Perforated door material meets equipment manufacturer ventilation requirements Application The Net Series cabinets economically house 19 or 23 in. equipment that supports LAN, WAN, phone, and voice mail equipment and servers in an indoor environment. Multiple sizes, designed-in cabinet adaptability, and selected accessories provide maximum application flexibility. Features Includes two sets of adjustable L-shaped rack angles for convenient equipment mounting Rack angles on communication cabinets have tapped holes per EIA standards. Order fasteners separately. Rack angles on server cabinets have square holes per EIA standards. Order fasteners and cage nuts separately. Rack angle settings on all 700 and 800mm wide cabinets can accommodate either 19 or 23 in. rack spacing In 600mm wide cabinets, equipment mounted on 19 in. rack angles is centered In 700 and 800mm wide cabinets, 19 in. rack angles can be set to center equipment or to mount equipment next to the left or the right side for improved cable management Rack angles infinitely positionable within the cabinet for easy adjustment to desired position All doors are field removable and reversible with left or right hinging for installation flexibility Communication cabinet has fully perforated or window front and louvered rear doors for equipment ventilation Server cabinet has fully perforated front and split rear perforated doors for easy access to servers Doors have key-locking handles that provide security with convenient access for authorized personnel Removable side panels with 1/4 turn key-locking latch are inset for flush appearance Two cable entry ports with caps and grommets on cabinet top for wiring ease Fan-ready top with integral finger guard. Order up to two 6 in. fans separately. Caster- and leveler-ready open base design. Order casters and levelers separately. Load Rating 1000 lbs (454 kg) per UL 1863 with load evenly distributed in enclosure NOTE: UL 1863 requires that the cabinet be tested with a load four times the rating. The cabinet was tested to 4000 lbs (1814 kg) without failure to meet the 1000 lb (454 kg) rating. Contact Hoffman if other loading specifications are required. Accessories Most 19 and 23 in. rack mount accessories mount easily to the rack angles. Other general accessories can also be used. See Accessories. 6 Subject to change without notice PH FX Hoffman Enclosures Inc.

6 Net Series Communication and Server Cabinets Standard Cabinets DC Standard Sizes Net Series Communication and Server Cabinets Catalog Number Description Nominal Size A (in.) A B (in.) B C (in.) C M (in.) M N (in.) N Rack Units Rack Angle Holes Additional Rack Angles NC1268 Communication Cabinet 1245 x 600 x Tapped NRAT126 NC2178 Communication Cabinet 2134 x 700 x Tapped NRAT217 NC2179 Communication Cabinet 2134 x 700 x Tapped NRAT217 NC21710 Communication Cabinet 2134 x 700 x Tapped NRAT217 nc2188 Communication Cabinet 2134 x 800 x Tapped NRAT218 nc2189 Communication Cabinet 2134 x 800 x Tapped NRAT218 nc21810 Communication Cabinet 2134 x 800 x Tapped NRAT218 NCW2168 Communication Cabinet, Window Door 2134 x 600 x Tapped NRAT216 NCW2178 Communication Cabinet, Window Door 2134 x 700 x Tapped NRAT217 NCW2188 Communication Cabinet, Window Door 2134 x 800 x Tapped NRAT218 NS12610 Server Cabinet 1245 x 600 x Square NRAS126 NS2169 Server Cabinet 2134 x 600 x Square NRAS216 NS21610 Server Cabinet 2134 x 600 x Square NRAS216 NS21611 Server Cabinet 2134 x 600 x Square NRAS216 ns21612 Server Cabinet 2134 x 600 x Square NRAS216 NS21711 Server Cabinet 2134 x 700 x Square NRAS217 NS21811 Server Cabinet 2134 x 800 x Square NRAS218 Free-Standing Cabinets Tapped and square hole rack angles of the same size can be used interchangeably in communication and server cabinets. See rack angle table for available rack angles. Subject to change without notice PH FX Hoffman Enclosures Inc. 7

7 Net Series Communication and Server Cabinet Accessories Standard Cabinets DCY Net Series Rack Angles Rack angles are available with either tapped or square mounting holes. Communication and server cabinets can use either tapped hole or square hole rack angles. Finish is RAL 9005 black, low gloss smooth polyester powder paint. Shipped in sets of two with two mounting brackets and mounting hardware. Length (in.) Length Hole Type Use With Net Series Cabinet (H x W) NRAT Tapped 1245mm x 600mm NRAT Tapped 2134mm x 600mm NRAT Tapped 2134mm x 700mm NRAT Tapped 2134mm x 800mm NRAS Square 1245mm x 600mm NRAS Square 2134mm x 600mm NRAS Square 2134mm x 700mm NRAS Square 2134mm x 800mm Net Series Caster Kit Description These recessed ball-bearing casters allow Net Series cabinet repositioning with a minimum of effort. Casters add 2 in. to height of cabinet. Kit includes four casters, recessed brackets, and mounting hardware. NCK Set of four casters, recessed brackets, and mounting hardware Net Series Joining Kit Description The joining kit enables joining Net Series cabinets without sides to NJK Net Series Joining Kit form a single bank of cabinets. Each kit joins two cabinets. Net Series Leveler Kit Description Leveler Kits allow adjustment of Net Series cabinets for uneven floors. Can be used with casters to stabilize final installation. NLK Set of four levelers Net Series Vertical Tie Down Cable Manager Hold larger cable bundles securely. Velcro Cable Wraps provide convenient cable fastening and easy access to individual cables. One piece design. Holes provided for addition of cable transitions, spools, or D-Rings (order separately). Made of steel coated with RAL 9005 black polyester powder paint. Includes mounting hardware. A (in.) A Fits Cabinet Height Nvcmtd mm Nvcmtd mm Velcro is a trademark of Velcro Industries V.B. 8 Subject to change without notice PH FX Hoffman Enclosures Inc.

8 Net Series Communication and Server Cabinet Accessories Standard Cabinets Various Cabinet Cable Managers Cable Organizers Easy to slip cable into support brackets, horizontal/vertical models (shown) manage cable transitions. ECK19H ECK19HV ECK23HV 19 in. horizontal 19 in. horizontal/vertical 23 in. horizontal/vertical CableTek Horizontal Cable Manager Routes cable bundles horizontally. Cover provides clean appearance and protects cable. DchS1 19 in., single-sided, 1 RU DCHS2 19 in., single-sided, 2 RU DCHD2 19 in., double sided, 2 RU Cable Trough Convenient solution for horizontal lay-in routing of cable. ECT19 ECT23 19 in. 23 in. D-Ring Cable Managers Easily fasten to vertical cable managers, snap closed, rotate to smooth cable transitions. ECM3DR10 ECM6DR10 Plastic, 3 in. Plastic, 6 in. Free-Standing Cabinets Selected General Accessories 19 in. Drawers Catalog Number Description Pullout drawer, steel, gray. Max. pullout in. P19DR1US 1 RU P19DR2US 2 RU P19DR3US 3 RU Drawer-top Writing Surface, steel painted gray P19WSa Fits on top of 19 in. P19DR_US drawers, all depths 19 in. Keyboard Compartments Shelves Catalog Drawing A19KBC2B P19KBPVT P19KBSM Description Fixed, brushed aluminum, 2 RU, holds keyboard up to in. wide Pivoting, steel, black, pivots 90, holds standard size keyboard, extends 9.75 in. in front of rack angles, 2 RU Pullout with mini keyboard, steel, black, slides between rack angles, holds up to in. keyboard, extends 8.94 in., 2 RU 19 in. Shelves 23 in. Shelves Description Fixed solid shelf, black, 1 RU P19SH68B P23SH68B in. deep, fits rack angle depth to in. P19SH810B P23SH810B in. deep, fits rack angle depth to in. Fixed vented shelf, black, 1 RU P19VSH68B P23VSH68B in. deep, fits rack angle depth to in. P19VSH810B P23VSH810B in. deep, fits rack angle depth to in. Pullout solid shelf, black, rack mount P19SHP68B P23SHP68B Max. pullout in.; in. deep, fits rack angle depth to 37.4 in. P19SHP810B P23SHP810B Max pullout in.; in. deep, fits rack angle depth to 41.3 in. PHCB Support Arm for pullout shelves Tool-less Vented Shelf for Square Hole Rack Angles D19FVT69B mm nominal depth D19FVT912B mm nominal depth Fans Fastener Kits General Accessories Catalog Number Description A6AXFNPG Fans, corded, 240 cfm, 56 db, max. 2 A6AXFNGQ Quiet Fan, corded, 100 cfm, 38 db, max. 2 ACORD2 Accessory Name Catalog Number Description Concrete Expansion ESBDK Includes 4 bolts Anchor Kit Paint, touch-up ATPB9005 RAL 9005 Black, aerosol Tool-less Snap-in D19BPT1RU 1 RU Blanking Panel Tool-less Snap-in D19BPT2RU 2 RU Blanking Panel Rack Panel, 1 RU P19Rpp1UB RAL 9005 black Rack Panel, 2 RU P19Rpp2UB RAL 9005 black Rack Panel, 3 RU P19Rpp3UB RAL 9005 black Rack Panel, 4 RU P19Rpp4UB RAL 9005 black Rack Panel, 5 RU P19Rpp5UB RAL 9005 black Rack Panel, 6 RU P19Rpp6UB RAL 9005 black Panel Adapters, (for mounting 19 in. equipment in 23 in. cabinets Double fan cord, allows two fans on one cord Description Color Kit Qty. Screw Kits x 5/8 in. combo AS1032/AS Silver 20/250 head x 1/2 in. combo ES1224/ES Silver 20/250 head x 1/2 in. combo head ES1224B/ES1224B250 Black 20/250 M5 x 20mm Phillips head ASM5 Silver 20 M6 x 16mm Phillips head ASM6/ASM6250 Silver 20/250 Cage Nut Kits (Use on square hole rack angles) cage nut P1032CN/P1032CN250 Silver 20/ cage nut P1224CN Silver 20 M5 cage nut PM5CN Silver 20 M6 cage nut PM6CN/PM6CN250 Silver 20/250 ERB1U2319 ERB1U2319 ERB5U RU 3 RU 3 RU Subject to change without notice PH FX Hoffman Enclosures Inc. 9

9 PROLINE ConnecTek Communications (Patch) Cabinet Standard Cabinets DPVD Heat Dissipation 2,500 watts Includes front cable manager with covers and rear open cable managers to support and route cable. See Cable/Power Management chapter for cable manager specifications. Cabinet Width Front Cable Manager Included Rear Cable Manager Included 700 PVCM207 PRBTD PVCMX208 PRBTD2010 Models without sides fit together quickly for easy installation in ganged applications; can be ganged with server cabinets or with additional Hoffman patch cabinets Three-point locking pushbutton swing handle on front door provides easy but controlled access. Two keys included. Rear doors are split for easy access and include 3 point, low profile, locking swing handle Two sets of tapped 19 in. rack angles support both front and rear of equipment Rack angles are infinitely adjustable from front to rear for positioning flexibility Large gland plate in top allows easy routing of cable, preterminated cables, and patch panels Twenty screws are included Application Rear View These patch cabinets provide maximum passive air flow and are available either 700mm or 800mm wide to better accommodate cables, patch cords, and network equipment. They are designed for use in data rooms with either random or hot aisle/cold aisle cabinet positioning. Because there is no fan, these cabinets require minimum maintenance. Cabinets are tested to thermally manage up to 2500 watts. Thermal Performance Thermal rating of 2500 watts heat dissipation is based on: 55 F (13 C) ambient temperature in front of cabinet Maximum inside temperature 100 F (38 C) Equipment spaced to allow air flow (reduces hot spot potential) Blank RU spaces filled with rack panels NOTE: Actual performance may vary depending on equipment layout and ambient temperature. Higher ambient temperatures will reduce heat dissipation, resulting in higher internal cabinet temperatures. Construction 16 or 14 gauge steel doors, sides, and cover Welded 12 gauge steel frame Rack angles have tapped holes with EIA 310-D spacing Open bottom with integral bolt-down brackets Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Features Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability Fully perforated top, front door, and rear doors allow maximum air movement around cables, patch panels, and other network equipment; conforms to server manufacturer open space requirements Two vertical cable managers included are full-length and have covers. 10 Subject to change without notice PH FX Hoffman Enclosures Inc.

10 PROLINE ConnecTek Communications (Patch) Cabinet Standard Cabinets DPVD Standard Sizes PROLINE ConnecTek Communications (Patch) Cabinet With Sides s Without Sides s Nominal A x B x C Rack Units B a B a (in.) C C (in.) Additional Tapped Hole Rack Angle Additional Square Hole Rack Angle Pnc2079b Pnc2079bns 2000 x 700 x pra1920tpl1 pra1920thl1 pnc20710b pnc20710bns 2000 x 700 x pra1920tpl1 pra1920thl1 pnc20711b pnc20711bns 2000 x 700 x pra1920tpl1 pra1920thl1 pnc20712b pnc20712bns 2000 x 700 x pra1920tpl1 pra1920thl1 Pnc2089b Pnc2089bns 2000 x 800 x pra1920tpl1 pra1920thl1 pnc20810b pnc20810bns 2000 x 800 x pra1920tpl1 pra1920thl1 pnc20811b pnc20811bns 2000 x 800 x pra1920tpl1 pra1920thl1 pnc20812b pnc20812bns 2000 x 800 x pra1920tpl1 pra1920thl1 a Dimension with sides. Dimension without sides is 9mm (.35 in.) less. Free-Standing Cabinets Selected Accessories (cont.) Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Anchor Kit, Concrete Expansion Bolt Drawer, Pull-out, 19-in. Rack Mount, 1 RU Drawer, Pull-out, 19-in. Rack Mount, 2 RU Drawer, Pull-out, 19-in. Rack Mount, 3 RU Writing Surface Fan Tray, 19-in. Rack Mount, 3 fans Fan Tray, 19-in. Rack Mount, 6 fans Joining Kit Keyboard Compartment, 19-in. Rack Mount Keyboard, Pivoting 19-in. Rack Mount Mounting Channel, fits 900mm deep cabinet Mounting Channel, fits 1000mm deep cabinet ESBDK P19DR1US P19DR2US P19DR3US P19WS a A19FT3B A19FT6B PJ2FD A19KBC2B P19KBPVT PMU9B PMU10B Accessory Name Mounting Channel, fits 1100mm deep cabinet Mounting Channel, fits 1200mm deep cabinet Mounting Channel Screws Paint, Touch-up, Black (RAL 9005) Power Distribution Units (PDUs) Power Strip Bracket Rack Panels for 19 in. racks, 1 RU Rack Panels for 19 in. racks, 2 RU Rack Panels for 19 in. racks, 3 RU Rack Panels for 19 in. racks, 4 RU Rack Panels for 19 in. racks, 5 RU Tool-less Snap-in Blanking Panel, 1 RU Tool-less Snap-in Blanking Panel, 2 RU Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth Shelves, 19 in. fixed solid black mm deep PMU11B PMU12B APSM6CN ATPB9005 See Cable/Power Management A19PSMB p19rpp1ub p19rpp2ub p19rpp3ub p19rpp4ub p19rpp5ub D19BPT1RU D19BPT2RU D19FVT69B D19FVT912B P19SH810B Shelves, 19 in. fixed vented black mm deep P19VSH68B Shelves, 19-in., fixed vented black mm P19VSH810B deep Shelves, 19-in., sliding equipment, for enclosure P19SHP68B depth to 800mm Shelves, 19-in., sliding equipment, for enclosure P19SHP810B depth to 1000mm Side Cover Lock PSCLO Vertical Cable Manager PVCM1 Vertical Cable Manager PVCMTD2o Horizontal Cable Trough, 200 mm PHCT1 Horizontal Cable Trough, 350 mm PHCT2 Horizontal Cable Trough, 500 mm PHCT3 Horizontal Cable Trough, 650 mm PHCT4 Post-Type Levelers, Qty 4 PLM12 PROLINE Caster Kit, Qty. 4 PC1M12 Screw Package plated, Qty 20 AS1032 Screw Package plated, Qty 250 AS Screw Package black, Qty 20 AS1032B Velcro TM Cable Wraps All a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. Subject to change without notice PH FX Hoffman Enclosures Inc. 11

11 PROLINE FloTek PC (Passive Cooling) Server Cabinet Standard Cabinets DPSR Heat Dissipation 2,500 watts Rear doors are split for easy access and include 3 point, low profile, locking swing handle Two sets of 19 in., square-hole rack angles support both front and rear of equipment Rack angles are infinitely adjustable from front to rear for positioning flexibility Large gland plate in top allows easy routing of cable, preterminated cables, and patch panels Mounting hardware (20 each of screws and cage nuts) is included Construction 16 or 14 gauge steel doors, sides, and cover Welded 12 gauge steel frame Rack angles have square holes with EIA 310-D spacing Open bottom with integral bolt-down brackets Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Rear view Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Application These server cabinets provide maximum passive air flow. They are designed for use in data rooms with either random or hot aisle/cold aisle cabinet positioning. Because there is no fan, these cabinets require minimum maintenance. Cabinets are tested to thermally manage up to 2500 watts. Thermal Performance Thermal rating of 2500 watts heat dissipation is based on: 55 F (13 C) ambient temperature in front of cabinet Maximum inside temperature 100 F (38 C) Equipment spaced to allow air flow (reduces hot spot potential) Blank RU spaces filled with rack panels NOTE: Actual performance may vary depending on equipment layout and ambient temperature. Higher ambient temperatures will reduce heat dissipation, resulting in higher internal cabinet temperatures. Features Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability Fully perforated front and rear doors and fully perforated top allow maximum air movement around equipment; conforms to server manufacturer open space requirements Models without sides fit together quickly for easy installation in ganged applications Three-point locking pushbutton swing handle on front door provides easy but controlled access. Two keys included. Standard Sizes PROLINE FloTek PC (Passive Cooling) Server Cabinet With Sides a Without Sides a C C (in.) Nominal A x B x C Rack Units Additional Square Rack Angle PSCPC2069B PSCPC2069BNS x 600 x PRA1920THL1 PSCPC20610B PSCPC20610BNS x 600 x PRA1920THL1 PSCPC20611B PSCPC20611BNS x 600 x PRA1920THL1 PSCPC20612B PSCPC20612BNS x 600 x PRA1920THL1 a Cabinet width with sides is in. (608mm); without sides is in. (599mm). 12 Subject to change without notice PH FX Hoffman Enclosures Inc.

12 PROLINE FloTek PC (Passive Cooling) Server Cabinet Standard Cabinets DPSR Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Anchor Kit, Concrete Expansion Bolt Drawer, Pull-out, 19-in. Rack Mount, 1 RU Drawer, Pull-out, 19-in. Rack Mount, 2 RU Drawer, Pull-out, 19-in. Rack Mount, 3 RU ESBDK P19DR1US P19DR2US P19DR3US Free-Standing Cabinets Writing Surface P19WSa Fan Tray, 19-in. Rack Mount, 3 fans A19FT3B Fan Tray, 19-in. Rack Mount, 6 fans A19FT6B Joining Kit PJ2FD Keyboard Compartment, 19-in. Rack Mount A19KBC2B Keyboard, Pivoting 19-in. Rack Mount P19KBPVT Mounting Channel, 900 mm PMU9B Mounting Channel, 1000 mm PMU10B Mounting Channel, 1100 mm PMU11B Mounting Channel, 1200 mm PMU12B Mounting Channel Screws APSM6CN Paint, Touch-up, Black (RAL 9005) ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Power Strip Bracket A19PSMB Rack Panels for 19 in. racks, 1 RU p19rpp1ub Rack Panels for 19 in. racks, 2 RU p19rpp2ub Rack Panels for 19 in. racks, 3 RU p19rpp3ub Rack Panels for 19 in. racks, 4 RU p19rpp4ub Rack Panels for 19 in. racks, 5 RU p19rpp5ub Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU Fastener Packages Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth D19FVT69B Fastener Name Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth D19FVT912B Cage Nut Package, 12-24, plated, Qty 20 P1224CN Shelves, 19 in. fixed solid black mm deep P19SH68B Cage Nut Package, 12-24, plated, Qty 250 P1224CN250 Shelves, 19 in. fixed solid black mm deep P19SH810B Cage Nut Package, 10-32, plated, Qty 20 P1032CN Shelves, 19 in. fixed vented black mm deep P19VSH68B Cage Nut Package, 10-32, plated, Qty 250 Cage Nut Package, M5, plated, Qty 20 Cage Nut Package, M6, plated, Qty 20 Screw Package, 10-32, plated, Qty 20 Screw Package, 10-32, plated, Qty 250 Screw Package, 10-32, black, Qty 20 Screw Package, 12-24, plated, Qty 20 Screw Package, 12-24, plated, Qty 250 Screw Package, 12-24, black, Qty 20 Screw Package, 12-24, black, Qty 250 Screw Package, M5, plated, Qty 20 Screw Package, M6, plated, Qty 20 P1032CN250 PM5CN PM6CN AS1032 AS AS1032B ES1224 ES ES1224B ES1224B250 ASM5 ASM6 Shelves, 19-in., fixed vented black mm deep P19VSH810B Shelves, 19-in., sliding equipment, mm deep P19SHP68B Shelves, 19-in., sliding equipment, mm deep P19SHP810B Side Cover Lock PSCLO Vertical Cable Manager PVCMTD20 CableTek 19 in. Horizontal Cable Manager, doublesided, DCHD2 2 RU Horizontal Cable Trough, 200 mm PHCT1 Horizontal Cable Trough, 350 mm PHCT2 Horizontal Cable Trough, 500 mm PHCT3 Horizontal Cable Trough, 650 mm PHCT4 Post-Type Levelers, Qty 4 PLM12 PROLINE Caster Kit, Qty. 4 PC1M12 Velcro TM Cable Wraps All a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. Subject to change without notice PH FX Hoffman Enclosures Inc. 13

13 PROLINE FloTek RA (Random Active) Top Exhaust Server Cabinet Standard Cabinets DPSR Heat Dissipation 3,000 watts Two sets of 19 in., square-hole rack angles support both front and rear of equipment Rack angles are infinitely adjustable from front to rear for positioning flexibility Large gland plate in top allows easy routing of cable, preterminated cables, and patch panels Mounting hardware (20 each of screws and cage nuts) is included Construction 16 or 14 gauge steel doors, sides, and cover Welded 12 gauge steel frame Rack angles have square holes with EIA 310-D spacing Open bottom with integral bolt-down brackets Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Application Rear view These server cabinets provide improved heat dissipation in data room applications with random cabinet positioning. Cabinets are tested to thermally manage up to 3000 watts. Industry Standards EIA 310-D Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Thermal Performance Thermal rating of 3000 watts heat dissipation is based on: 55 F (13 C) ambient temperature in front of cabinet Maximum inside temperature 100 F (38 C) Equipment spaced to allow air flow (reduces hot spot potential) Blank RU spaces filled with rack panels NOTE: Actual performance may vary depending on equipment layout and ambient temperature. Higher ambient temperatures will reduce heat dissipation, resulting in higher internal cabinet temperatures. Features Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability Front door is fully perforated to allow maximum air flow; conforms to server manufacturer open space requirements Rear door with lower area perforations allow entrance of cool air from the floor 10 in., 550 cfm fan with integral finger guard pulls air in through lower door perforations and exhausts it at top Models without sides fit together quickly for easy installation in ganged applications Three-point locking pushbutton swing handles on all doors provide easy but controlled access. Two keys included. Standard Sizes PROLINE FloTek RA (Random Active) Top Exhaust Server Cabinet With Sides a Without Sides a C C (in.) Nominal A x B x C Rack Units Rack Angle PSCRA2069B PSCRA2069BNS x 600 x PRA1920THL1 PSCRA20610B PSCRA20610BNS x 600 x PRA1920THL1 PSCRA20611B PSCRA20611BNS x 600 x PRA1920THL1 PSCRA20612B PSCRA20612BNS x 600 x PRA1920THL1 a Cabinet width with sides is in. (608mm); without sides is in. (599mm). 14 Subject to change without notice PH FX Hoffman Enclosures Inc.

14 PROLINE FloTek RA (Random Active) Top Exhaust Server Cabinet Standard Cabinets DPSR Perforated Front Door Fastener Packages Fastener Name Top 4 in. Fan with Integral Finger Guard Gland Plate Rack Angles (4) Mounting Feet (4) Cage Nut Package, 12-24, plated, Qty 20 Cage Nut Package, 12-24, plated, Qty 250 Cage Nut Package, 10-32, plated, Qty 20 Cage Nut Package, 10-32, plated, Qty 250 Cage Nut Package, M5, plated, Qty 20 Cage Nut Package, M6, plated, Qty 20 Screw Package, 10-32, plated, Qty 20 Screw Package, 10-32, plated, Qty 250 Screw Package, 10-32, black, Qty 20 Screw Package, 12-24, plated, Qty 20 Screw Package, 12-24, plated, Qty 250 Screw Package, 12-24, black, Qty 20 Screw Package, 12-24, black, Qty 250 Screw Package, M5, plated, Qty 20 Screw Package, M6, plated, Qty 20 Frame Solid Sides (2 on Packages with Sides) Rear Door with Lower Perforations P1224CN P1224CN250 P1032CN P1032CN250 PM5CN PM6CN AS1032 AS AS1032B ES1224 ES ES1224B ES1224B250 ASM5 ASM6 Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Anchor Kit, Concrete Expansion Bolt ESBDK Drawer, Pull-out, 19-in. Rack Mount, 1 RU P19DR1US Drawer, Pull-out, 19-in. Rack Mount, 2 RU P19DR2US Drawer, Pull-out, 19-in. Rack Mount, 3 RU P19DR3US Writing Surface P19WSa Fan Tray, 19-in. Rack Mount, 3 fans A19FT3B Fan Tray, 19-in. Rack Mount, 6 fans A19FT6B Joining Kit PJ2FD Keyboard Compartment, 19-in. Rack Mount A19KBC2B Keyboard, Pivoting 19-in. Rack Mount P19KBPVT Mounting Channel, 900 mm PMU9B Mounting Channel, 1000 mm PMU10B Mounting Channel, 1100 mm PMU11B Mounting Channel, 1200 mm PMU12B Mounting Channel Screws APSM6CN Paint, Touch-up, Black (RAL 9005) ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Power Strip Bracket A19PSMB Rack Panels for 19 in. racks, 1 RU p19rpp1ub Rack Panels for 19 in. racks, 2 RU p19rpp2ub Rack Panels for 19 in. racks, 3 RU p19rpp3ub Rack Panels for 19 in. racks, 4 RU p19rpp4ub Rack Panels for 19 in. racks, 5 RU p19rpp5ub Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU Tool-less Vented Shelf for Square Hole Rack Angles, D19FVT69B mm nominal depth Tool-less Vented Shelf for Square Hole Rack Angles, D19FVT912B mm nominal depth Shelves, 19 in. fixed solid black mm deep P19SH68B Shelves, 19 in. fixed solid black mm deep P19SH810B Shelves, 19 in. fixed vented black mm deep P19VSH68B Shelves, 19-in., fixed vented black mm deep P19VSH810B Shelves, 19-in., sliding equipment, mm deep P19SHP68B Shelves, 19-in., sliding equipment, mm deep P19SHP810B Side Cover Lock PSCLO Vertical Cable Manager PVCMTD20 CableTek 19 in. Horizontal Cable Manager, doublesided, DCHD2 2RU Horizontal Cable Trough, 200 mm PHCT1 Horizontal Cable Trough, 350 mm PHCT2 Horizontal Cable Trough, 500 mm PHCT3 Horizontal Cable Trough, 650 mm PHCT4 Post-Type Levelers, Qty 4 PLM12 PROLINE Caster Kit, Qty. 4 PC1M12 Velcro TM Cable Wraps All a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 15

15 PROLINE FloTek HCA (Hot/Cold Aisle) Server Cabinet Standard Cabinets DPSR Heat Dissipation 6,000 watts Models without sides fit together quickly for easy installation in ganged applications Three-point locking pushbutton swing handle on front door provides easy but controlled access. Two keys included. Rear doors are split for easy access and include 3 point, low profile, locking swing handle Two sets of 19 in. square-hole rack angles support both front and rear of equipment Rack angles are infinitely adjustable from front to rear for positioning flexibility Large gland plate in top allows easy routing of cable, preterminated cables, and patch panels Mounting hardware (20 each of screws and cage nuts) is included Construction 16 or 14 gauge steel doors, sides, and cover Welded 12 gauge steel frame Rack angles have square holes with EIA 310-D spacing Open bottom with integral bolt-down brackets Application Rear view These server cabinets provide improved heat dissipation in data room applications with hot aisle/cold aisle cabinet positioning. Cabinets are tested to thermally manage up to 6000 watts. Thermal Performance Thermal rating of 6000 watts heat dissipation is based on: 55 F (13 C) ambient temperature in cold aisle Maximum inside temperature 100 F (38 C) Equipment spaced to allow air flow (reduces hot spot potential) Blank RU spaces filled with rack panels NOTE: Actual performance may vary depending on equipment layout and ambient temperature. Higher ambient temperatures will reduce heat dissipation, resulting in higher internal cabinet temperatures. Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Features Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability Fully perforated front door offers maximum air flow from cold aisle and conforms to server manufacturer open space requirements Six 6-in. fans with integral finger guards in the rear doors pull coldaisle air through cabinet and exhaust it to hot aisle Fans provide up to 1440 cfm airflow Fans on each door can be independently powered to provide redundant cooling Solid top helps direct airflow across equipment Standard Sizes PROLINE FloTek HCA (Hot/Cold Aisle) Server Cabinet With Sides a Without Sides a C C (in.) Nominal A x B x C Rack Units Additional Rack Angle PSCHCA2069B PSCHCA2069BNS x 600 x PRA1920THL1 PSCHCA20610B PSCHCA20610BNS x 600 x PRA1920THL1 PSCHCA20611B PSCHCA20611BNS x 600 x PRA1920THL1 PSCHCA20612B PSCHCA20612BNS x 600 x PRA1920THL1 a Cabinet width with sides is in. (608mm); without sides is in. (599mm). 16 Subject to change without notice PH FX Hoffman Enclosures Inc.

16 PROLINE FloTek HCA (Hot/Cold Aisle) Server Cabinet Standard Cabinets DPSR Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Anchor Kit, Concrete Expansion Bolt Drawer, Pull-out, 19-in. Rack Mount, 1 RU Drawer, Pull-out, 19-in. Rack Mount, 2 RU Drawer, Pull-out, 19-in. Rack Mount, 3 RU ESBDK P19DR1US P19DR2US P19DR3US Free-Standing Cabinets Writing Surface P19WSa Fan Tray, 19-in. Rack Mount, 3 fans A19FT3B Fan Tray, 19-in. Rack Mount, 6 fans A19FT6B Joining Kit PJ2FD Keyboard Compartment, 19-in. Rack Mount A19KBC2B Keyboard, Pivoting 19-in. Rack Mount P19KBPVT Mounting Channel, 900 mm PMU9B Mounting Channel, 1000 mm PMU10B Mounting Channel, 1100 mm PMU11B Mounting Channel, 1200 mm PMU12B Mounting Channel Screws APSM6CN Paint, Touch-up, Black (RAL 9005) ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Power Strip Bracket A19PSMB Rack Panels for 19 in. racks, 1 RU p19rpp1ub Rack Panels for 19 in. racks, 2 RU p19rpp2ub Rack Panels for 19 in. racks, 3 RU p19rpp3ub Rack Panels for 19 in. racks, 4 RU p19rpp4ub Rack Panels for 19 in. racks, 5 RU p19rpp5ub Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth D19FVT69B Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth D19FVT912B Shelves, 19 in. fixed solid black mm deep P19SH68B Shelves, 19 in. fixed solid black mm deep P19SH810B Shelves, 19 in. fixed vented black mm deep P19VSH68B Shelves, 19-in., fixed vented black mm deep P19VSH810B Shelves, 19-in., sliding equipment, mm deep P19SHP68B Fastener Packages Shelves, 19-in., sliding equipment, mm deep P19SHP810B Side Cover Lock PSCLO Vertical Cable Manager PVCMTD20 Fastener Name Cage Nut Package, 12-24, plated, Qty 20 Cage Nut Package, 12-24, plated, Qty 250 Cage Nut Package, 10-32, plated, Qty 20 Cage Nut Package, 10-32, plated, Qty 250 P1224CN P1224CN250 P1032CN P1032CN250 CableTek 19 in. Horizontal Cable Manager, doublesided, 2 RU Horizontal Cable Trough, 200 mm Horizontal Cable Trough, 350 mm Horizontal Cable Trough, 500 mm DCHD2 PHCT1 PHCT2 PHCT3 Cage Nut Package, M5, plated, Qty 20 PM5CN Horizontal Cable Trough, 650 mm PHCT4 Cage Nut Package, M6, plated, Qty 20 PM6CN Post-Type Levelers, Qty 4 PLM12 Screw Package, 10-32, plated, Qty 20 Screw Package, 10-32, plated, Qty 250 Screw Package, 10-32, black, Qty 20 Screw Package, 12-24, plated, Qty 20 Screw Package, 12-24, plated, Qty 250 AS1032 AS AS1032B ES1224 ES PROLINE Caster Kit, Qty. 4 PC1M12 Velcro TM Cable Wraps All a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. Screw Package, 12-24, black, Qty 20 ES1224B Screw Package, 12-24, black, Qty 250 ES1224B250 Screw Package, M5, plated, Qty 20 ASM5 Screw Package, M6, plated, Qty 20 ASM6 Subject to change without notice PH FX Hoffman Enclosures Inc. 17

17 Heat Dissipation 10,000 watts PROLINE FloTek FD (Floor Ducted) Server Cabinet Standard Cabinets DPSR Fans on each door can be independently powered to provide redundant cooling Blocking plates inside the cabinet on both sides and the top prevent recirculation of hot exhaust air Solid top helps direct airflow across equipment Sliding gland plate in top covers large opening that allows easy routing of network cables, pre-terminated cables, and patch panels Models without sides fit together quickly for easy installation in ganged applications Three-point locking pushbutton swing handle on front door provides easy but controlled access. Two keys included. Rear doors are split for easy access and include a low profile, locking swing handle Two sets of 19 in. square-hole rack angles with EIA universal spacing support both front and rear of equiment. Includes mobile base with casters and anti-tip bracket to facilitate moving cabinet into position Mounting hardware (20 each of screws and cage nuts) is included Application Rear view These server cabinets provide improved heat dissipation in raisedfloor data room applications. They have an integral floor duct that directs air into the server intakes when positioned over the required cutout in the raised floor. Cabinets are tested to thermally manage up to 10,000 watts. Thermal Performance Thermal rating of up to 10,000 watts heat dissipation is based on: Cutout in floor aligned with duct flange in base and with floor duct connected Sufficient plenum air at 55 F (13 C) ambient temperature supplied from floor Maximum inside temperature 100 F (38 C) Equipment spaced to allow air flow (reduces hot spot potential) Blank RU spaces filled with rack panels NOTE: Actual performance may vary depending on equipment layout and ambient temperature. Higher ambient temperatures will reduce heat dissipation, resulting in higher internal cabinet temperatures. Construction 16 or 14 gauge steel front door frame, rear door, sides, and cover Welded 12 gauge steel frame Window is made of.125 in. thick acrylic Rack angles have square holes with EIA 310-D spacing Duct flange in base for connecting to floor duct Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Required Floor Cutout A cutout that matches the air inlet in the floor of the cabinet must be cut in the raised floor. When installed the cabinet air inlet is aligned with the floor cutout, and the blocking plates help direct cool air from the floor plenum across the fronts of the equipment. Features Front window door provides a view of equipment inside the enclosure without opening the door Six 6-in. fans with integral finger guards in the rear doors pull floor-ducted air through cabinet and exhaust it to hot aisle Fans provide up to 1400 cfm airflow 18 Subject to change without notice PH FX Hoffman Enclosures Inc.

18 PROLINE FloTek FD (Floor Ducted) Server Cabinet Standard Cabinets DPSR Standard Sizes PROLINE FloTek FD (Floor Ducted) Server Cabinet With Sides a Without Sides a C C (in.) Nominal A x B x C Rack Units Additional Rack Angle PSFD2069B PSFD2069BNS x 600 x PRA1920THL1 PSFD20610B PSFD20610BNS x 600 x PRA1920THL1 PSFD20611B PSFD20611BNS x 600 x PRA1920THL1 PSFD20612B PSFD20612BNS x 600 x PRA1920THL1 a Cabinet width with sides is in. (608mm); without sides is in. (599mm). Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 19

19 PROLINE FloTek FD (Floor Ducted) Server Cabinet Standard Cabinets DPSR PROLINE FloTek FD Floor Ducted Active Server Cabinet Components Required Floor Cutout A cutout that matches the air inlet in the floor of the cabinet must be cut in the raised floor. When installed the cabinet air inlet is aligned with the floor cutout, and the blocking plates help direct cool air from the floor plenum across the fronts of the equipment. Floor Cutout Dimensions 20 Subject to change without notice PH FX Hoffman Enclosures Inc.

20 PROLINE FloTek FD (Floor Ducted) Server Cabinet Standard Cabinets DPSR Selected Accessories Fastener Packages See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Drawer, Pull-out, 19-in. Rack Mount, 1 RU Drawer, Pull-out, 19-in. Rack Mount, 2 RU Drawer, Pull-out, 19-in. Rack Mount, 3 RU Writing Surface Fan Tray, 19-in. Rack Mount, 3 fans Fan Tray, 19-in. Rack Mount, 6 fans Joining Kit P19DR1US P19DR2US P19DR3US P19WSa A19FT3B A19FT6B PJ2FD Fastener Name Cage Nut Package, 12-24, plated, Qty 20 Cage Nut Package, 12-24, plated, Qty 250 Cage Nut Package, 10-32, plated, Qty 20 Cage Nut Package, 10-32, plated, Qty 250 Cage Nut Package, M5, plated, Qty 20 Cage Nut Package, M6, plated, Qty 20 Screw Package, 10-32, plated, Qty 20 Screw Package, 10-32, plated, Qty 250 Screw Package, 10-32, black, Qty 20 P1224CN P1224CN250 P1032CN P1032CN250 PM5CN PM6CN AS1032 AS AS1032B Free-Standing Cabinets Keyboard Compartment, 19-in. Rack Mount A19KBC2B Screw Package, 12-24, plated, Qty 20 ES1224 Keyboard, Pivoting 19-in. Rack Mount P19KBPVT Screw Package, 12-24, plated, Qty 250 ES Mounting Channel, 900 mm Mounting Channel, 1000 mm Mounting Channel, 1100 mm Mounting Channel, 1200 mm PMU9B PMU10B PMU11B PMU12B Screw Package, 12-24, black, Qty 20 Screw Package, 12-24, black, Qty 250 Screw Package, M5, plated, Qty 20 Screw Package, M6, plated, Qty 20 ES1224B ES1224B250 ASM5 ASM6 Mounting Channel Screws APSM6CN Paint, Touch-up, Black (RAL 9005) ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Power Strip Bracket A19PSMB Rack Panels for 19 in. racks, 1 RU p19rpp1ub Rack Panels for 19 in. racks, 2 RU p19rpp2ub Rack Panels for 19 in. racks, 3 RU p19rpp3ub Rack Panels for 19 in. racks, 4 RU p19rpp4ub Rack Panels for 19 in. racks, 5 RU p19rpp5ub Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth D19FVT69B Tool-less Vented Shelf for Square Hole Rack Angles, mm nominal depth D19FVT912B Shelves, 19 in. fixed solid black mm deep P19SH68B Shelves, 19 in. fixed solid black mm deep P19SH810B Shelves, 19 in. fixed vented black mm deep P19VSH68B Shelves, 19-in., fixed vented black mm deep P19VSH810B Shelves, 19-in., sliding equipment, mm deep P19SHP68B Shelves, 19-in., sliding equipment, mm deep P19SHP810B Side Cover Lock PSCLO Vertical Cable Manager PVCMTD20 CableTek 19 in. Horizontal Cable Manager, doublesided, 2 RU DCHD2 Horizontal Cable Trough, 200 mm PHCT1 Horizontal Cable Trough, 350 mm PHCT2 Horizontal Cable Trough, 500 mm PHCT3 Horizontal Cable Trough, 650 mm PHCT4 Velcro TM Cable Wraps All a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. Subject to change without notice PH FX Hoffman Enclosures Inc. 21

21 PROLINE Server Cabinet Standard Cabinets DPSR Construction 16 or 14 gauge steel doors, sides, and cover Fully welded 12 gauge steel frame L-shaped rack angles (4) have square holes with EIA 310-D spacing Open base with recessed casters and levelers Anti-tip angle made of heavy-gauge steel included Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Application This pre-assembled package accommodates the most up-to-date server requirements. The 1200 and 2000mm nominal heights along with the 900, 1000, 1100, and 1200mm nominal depths give the flexibility needed to protect the servers while maximizing control room space utilization. Features Front window door with key lock offers both visibility and ventilation Fully perforated rear door provides excellent ventilation, keeping equipment cool and extending its life 2000mm tall cabinets have split rear perforated doors Both front and rear doors have lockable handles with 3-point latch Quick release latches on side panels provide easy service access Fully perforated top cover with gland plate for easy access and service Mounting channels (6) provide infinite front to back adjustment of rack angles Rack angles are coated with black polyester powder paint Meets industry testing standards criteria Mounting hardware (20 each of screws and cage nuts) is included Standard Sizes PROLINE Server Cabinet RAL 9005 Black RAL 7035 Gray Rack Units Nominal Height x Width x Depth A A (in.) C C (in.) Additional Rack Angles PSC1269B PSC x 600 x PRA1912THL1 PSC12610B PSC x 600 x PRA1912THL1 PSC2069B PSC x 600 x PRA1920THL1 PSC20610B PSC x 600 x PRA1920THL1 PSC20611B PSC x 600 x PRA1920THL1 PSC20612B PSC x 600 x PRA1920THL1 22 Subject to change without notice PH FX Hoffman Enclosures Inc.

22 Standard Cabinets PROLINE Server Cabinet DPSR Rack Angles (4) Mounting Channels (6) Vented Window Door Anti-Tip Angle Perforated Cable Entry Top Selected Accessories Perforated Rear Door (1200 mm tall cabinet) Optional Fixed Shelf Cable Entry Base with Casters and Leveling Feet Split Perforated Rear Door (2000 mm tall cabinet) Quick-Release Sides (2) See Accessories chapter for accessory specifications and additional accessories. Fastener Packages Fastener Name Cage Nut Package, 12-24, plated, Qty 20 Cage Nut Package, 12-24, plated, Qty 250 Cage Nut Package, 10-32, plated, Qty 20 Cage Nut Package, 10-32, plated, Qty 250 Cage Nut Package, M5, plated, Qty 20 Cage Nut Package, M6, plated, Qty 20 Screw Package, 10-32, plated, Qty 20 Screw Package, 10-32, plated, Qty 250 Screw Package, 10-32, black, Qty 20 Screw Package, 12-24, plated, Qty 20 Screw Package, 12-24, plated, Qty 250 Screw Package, 12-24, black, Qty 20 Screw Package, 12-24, black, Qty 250 Screw Package, M5, plated, Qty 20 Screw Package, M6, plated, Qty 20 P1224CN P1224CN250 P1032CN P1032CN250 PM5CN PM6CN AS1032 AS AS1032B ES1224 ES ES1224B ES1224B250 ASM5 ASM6 Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Anchor Kit, Concrete Expansion Bolt ESBDK Drawer, Pull-out, 19-in. Rack Mount, 1 RU P19DR1US Drawer, Pull-out, 19-in. Rack Mount, 2 RU P19DR2US Drawer, Pull-out, 19-in. Rack Mount, 3 RU P19DR3US Writing Surface P19WSa Fan Tray, 19-in. Rack Mount, 3 fans A19FT3B Fan Tray, 19-in. Rack Mount, 6 fans A19FT6B Joining Kit PJ2FD Keyboard Compartment, 19-in. Rack Mount A19KBC2B Keyboard, Pivoting 19-in. Rack Mount P19KBPVT Mounting Channel, 900 mm PMU9B Mounting Channel, 1000 mm PMU10B Mounting Channel, 1100 mm PMU11B Mounting Channel, 1200 mm PMU12B Mounting Channel Screws APSM6CN Paint, Touch-up, Black (RAL 9005) ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Power Strip Bracket A19PSMB Rack Panels for 19 in. racks, 1 RU p19rpp1ub Rack Panels for 19 in. racks, 2 RU p19rpp2ub Rack Panels for 19 in. racks, 3 RU p19rpp3ub Rack Panels for 19 in. racks, 4 RU p19rpp4ub Rack Panels for 19 in. racks, 5 RU p19rpp5ub Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU Tool-less Vented Shelf for Square Hole Rack Angles, D19FVT69B mm nominal depth Tool-less Vented Shelf for Square Hole Rack Angles, D19FVT912B mm nominal depth Shelves, 19 in. fixed solid black mm deep P19SH68B Shelves, 19 in. fixed solid black mm deep P19SH810B Shelves, 19 in. fixed vented black mm deep P19VSH68B Shelves, 19-in., fixed vented black mm deep P19VSH810B Shelves, 19-in., sliding equipment, mm deep P19SHP68B Shelves, 19-in., sliding equipment, mm deep P19SHP810B Side Cover Lock PSCLO Vertical Cable Manager PVCMTD20 CableTek 19 in. Horizontal Cable Manager, doublesided, DCHD2 2 RU Horizontal Cable Trough, 200 mm PHCT1 Horizontal Cable Trough, 350 mm PHCT2 Horizontal Cable Trough, 500 mm PHCT3 Horizontal Cable Trough, 650 mm PHCT4 Velcro TM Cable Wraps All a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 23

23 PROLINE Voice/Data Cabinet Standard Cabinets DPVD Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Application This pre-assembled package meets all of the most common voice and data requirements and is available in two colors and five sizes. Optional PROLINE components and DataCom accessories may be added to your original package or ordered separately. Features Mounting channels (4) provide infinite front to back adjustment of rack angles Rack angles are coated with black polyester powder paint Front acrylic window door offers unobstructed visibility Fully louvered rear door provides excellent ventilation, keeping equipment cool and extending its life Single point trigger latch with keylock for security combined with easy access on both front and rear doors Quick release latches on side panels provide easy service access Fan ready top with two cable entry ports for easy access and service Open base for easy access and service L-shaped rack angles (4) have tapped holes with EIA 310-D spacing Construction Fully welded heavy gauge steel frame Both front and rear doors have lockable handles Mounting hardware (10-32 screws, qty. 20) is included Standard Sizes PROLINE Voice and Data Cabinet RAL 9005 Black RAL 7035 Gray Nominal A x B x C A x B x C A x B x C M M N N Rack Additional Reducing Bracket for (in.) (in.) (in.) Units Rack Angles 19 in. Spacing PDCP1678B PDCP x 700 x x 708 x x x PRA1916TPL1 PMURB50 PDCP1878B PDCP x 700 x x 708 x x x PRA1918TPL1 PMURB50 PDCP2078B PDCP x 700 x x 708 x x x PRA1920TPL1 PMURB50 PDCP2088B PDCP x 800 x x 808 x x x PRA1920TPL1 PMURB100 PDCP2288B PDCP x 800 x x 808 x x x PRA1922TPL1 PMURB Subject to change without notice PH FX Hoffman Enclosures Inc.

24 PROLINE Voice/Data Cabinet Standard Cabinets DPVD Selected Accessories (cont.) Window Door Cable Entry Top Mounting Frame Channels (4) Reducing PROLINE Brackets (8) Frame Rack Angles (4) Frame Feet (4) Louvered Rear Door Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Quick Release Sides (2) Voice and Data Cabinet PDCP1678B PDCP1678 Accessory Catalog PDCP1878B PDCP2088B PDCP1878 PDCP2088 Name Number PDCP2078B PDCP2288B PDCP2078 PDCP in.cable ECT19 Trough Drawer, Pull-out, 19 in. Rack Mount 1 RU P19DR1US 2 RU P19DR2US 3 RU P19DR3US Writing Surface P19WS a Fan, 4 in. std. A4AXFNPG Fan, 4 in., quiet A4AXFNGQ Fan Plate 2 6 in. fans PFA06021MP 1 10 in. fan PFA10011MP Fan Tray, 19 in. Rack Mount 3 fans A19FT3B 6 fans A19FT6B Joining Kit PJ2FD Tool-less Snapin Blanking D19BPT1RU Panel, 1 RU Tool-less Snapin Blanking D19BPT2RU Panel, 2 RU Voice and Data Cabinet Accessory Catalog PDCP1678B PDCP1878B PDCP1678 PDCP2088B PDCP1878 Name Number PDCP2078B PDCP2288B PDCP2078 Keyboard Compartment 19 in. Rack A19KBC2B Mount P19KBPVT Pivoting, 19 in. Rack Mount Mini, 19 in. P19KBSM Rack Mount Mtg. Channel PMU8B Mtg. Screws ASPM6CN Side Cover Lock PSCLO Paint, Touch-up Black ATPB9005 Light Gray ATPG7035 Power Distribution Units (PDUs) See Cable/Power Management Power Strip A19PSMB Bracket, rack mount Screw Packages Qty 20 AS Qty 250 AS Shelves, 19 in. Fixed solid black P19SH68B Fixed solid gray P19SH68 Fixed vented P19VSH68B black Pull-out black P19SHP68B Cable Manager PHCB Arm (Use with Pull-out Shelf) Vertical Cable Manager 700mm 1600 PVCM PVCM PVCM PVCM227 Vertical Cable Manager 800mm 2000 PVCM PVCM228 Vertical Cable PVCMTD20 Fits 2000mm tall cabinets Manager Horizontal Cable Trough 200 mm PHCT1 350 mm PHCT2 500 mm PHCT3 650 mm PHCT4 Velcro Cable Wraps a Fits 19 in. drawers P19DR1US, P19DR3US, and P19DR5US. Velcro is a trademark of Velcro Industries B.V. PDCP2088 PDCP2288 Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 25

25 PROLINE Type 1 Voice/Data and Server Cabinets with Fan and Filter Package Standard Cabinets DPSR Two sets of 19 in. rack angles support both front and rear of equipment Rack angles are infinitely adjustable from front to rear for positioning flexibility Fan and filter package provides up to 600 cfm of filtered air to help keep equipment cool Removable filters can be cleaned to maintain optimal performance Mobile base provides easy placement of cabinet Levelers and anti-tip bracket secure cabinet to the floor Construction Welded 12 gauge steel frame with integral struts Front window door made of 16 or 14 gauge steel with safety glass window Solid 16 or 14 gauge steel back door Solid 16 or 14 gauge sides with factory-installed intake filters Pagoda top has 115V fan with 6 foot (1.8m) cord. Fan capacity is 600 CFM (16.99m 3 /minute). Models available with EIA Universal standard 3/8 in. square or tapped holes Mobile base includes casters, levelers, and gland plate Gland plate allows easy routing of cable Application These cabinets house data equipment in dusty and dirty environments. They keep out contaminants by filtering the air as it comes into the cabinet. These cabinets are ideal to house and protect sensitive electronic equipment in an uncontrolled indoor environment where ambient air temperature is less than 85 F (29 C) Thermal Performance The following thermal performance table is based on: Clean intake filters Maximum average inside temperature 95 F (35 C) Pagoda top fan running at 600 CFM (17 m3/minute) Equipment spaced to allow air flow (reduces hot spot potential) NOTE: Actual performance may vary depending on equipment layout. Ambient air temperature at intakes ºF ºC Cooling capacity ,500 watts ,000 watts ,000 watts ,500 watts Above 85 Above 29 Not recommended Finish Phosphatized steel coated with RAL 9005 black or RAL 7035 light gray textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D UL508A Type 1 Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Features Three-point locking handles on all doors provide easy but controlled access. Two keys included. Fully welded frame safely supports sensitive equipment Gasketed covers and air intake filters keep contaminants away from equipment, reducing maintenance cost Standard Sizes PROLINE Type 1 Voice/Data and Server Cabinets with Fan and Filter Package RAL 9005 Black RAL 7035 Gray Nominal A x B x C B B (in.) C C (in.) Cabinet Type Rack Units Rack Angle Hole Type PDCP2078BFP PDCP2078GFP 2000 x 700 x Voice/Data 42 PRA1920TPL1 Tapped PSC20610BFP PSC20610GFP 2000 x 600 x Server 42 PRA1920THL1 Square 26 Subject to change without notice PH FX Hoffman Enclosures Inc.

26 Package Components Component PROLINE Type 1 Voice/Data and Server Cabinets with Fan and Filter Package Black Gray mm Nominal Size Frames Pfd2078B pfd2078g 2000 x 700 x 800 pfd20610b pfd20610g 2000 x 600 x 1000 Window Doors pdwg206b pdwg206g 2000 x 600 pdwg207b pdwg207g 2000 x 700 Solid Doors pds206b pds206g 2000 x 600 pds207b pds207g 2000 x 700 Sides pss208fpb pss208fpg 2000 x 800 pss2010fpb pss2010fpg 2000 x 1000 Top ppthp78b ppthp78g 700 x 800 ppthp610b ppthp610g 600 x 1000 Mobile Base pbmg78b 700 x 800 Fastener Packages Fastener Name pbmg610b 600 x 1000 Catalog Number Square Hole Tapped Hole Cage Nut Package Qty 20 P1224CN Cage Nut Package Qty 250 P1224CN250 Cage Nut Package Qty 20 P1032CN Cage Nut Package Qty 250 P1032CN250 Cage Nut Package. M5 Qty 20 PM5CN Cage Nut Package. M6 Qty 20 PM6CN Screw Package Qty 20 AS1032 Screw Package Qty 250 AS Screw Package Qty 20 ES1224 Screw Package Qty 250 ES Screw Package Qty 20 Black ES1224B Screw Package Qty 250 Black ES1224B250 Screw Package. M5 Qty 20 ASM5 Screw Package. M6 Qty 20 ASM6 Selected Accessories Standard Cabinets See the Accessories chapter for accessory specifications and additional accessories. DPSR Cabinet Catalog 2000 x x 600 Accessory Name Number x 800 x 1000 Snap-in Blanking Panel, 1 RU D19BPT1RU Snap-in Blanking Panel, 2 RU D19BPT2RU Cable Trough, 19 in. Rack Mount ECT19 Drawer Pull-out, 19 in rack mount, P19DR1US 1 RU Drawer Pull-out, 19 in rack mount, P19DR2US 2 RU Drawer Pull-out, 19 in rack mount, P19DR3US 3 RU Fan Tray, 19 in. rack mount, 3 fans A19FT3b Fan Tray, 19 in. rack mount, 6 fans A19FT6b Joining Kit PJ2F Keyboard Compartment, 19 in. rack A19KBC2b mount Keyboard, Pivoting, 19 in. rack mount P19KBPVT Mini Keyboard, 19 in. rack mount P19KBSM Paint, Touch-up Black ATPB9005 Light Gray ATPG7035 Power Distribution Units (PDAs) See Cable/Power Management Power Strip Bracket, Rack Mount A19PSMB Shelves 19-in., fixed solid black P19SH68B 19-in., fixed solid black P19SH810b 19-in., fixed vented black P19VSH68B 19-in., fixed vented black p19vsh810b 19-in., pull-out black P19SHP68B 19 in., pull-out black p19shp810b Tool-less Vented Shelf for Square Hole D19FVT69B Rack Angles, mm nominal depth Tool-less Vented Shelf for Square Hole D19FVT912B Rack Angles, mm nominal depth Cable Manager Arm, PHCB (Use with Pull-out shelf) Writing Surface P19WSa Vertical Cable Manager 700mm PVCM207 Vertical Cable Manager, 700 mm, PVCMX207 extra deep Vertical Cable Manager PVCMTD20 CableTek 19 in. Horizontal Cable DCHD2 Manager, double-sided, 2 RU Horizontal Cable Trough 200 mm PHCT1 350 mm PHCT2 500 mm PHCT3 650 mm PHCT4 Velcro Cable Wraps Velcro is a trademark of Velcro Industries B.V. Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 27

27 PROLINE Type 12 Voice/Data and Server Cabinets Standard Cabinets DPSR AC package has cutout for easy in-the-field installation of any CR29 series air conditioner (shipped separately) Models available with EIA Universal standard 3/8 in. square or tapped holes Mobile base includes casters, levelers, and gland plate Gland plate allows easy routing of cable Finish Phosphatized steel coated with RAL 9005 black or RAL 7035 light gray textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA RS-310-D UL 508A, File Number E61997, Type 12 cul C22.2 No. 94, File Number E61997, Type 12 NEMA/EEMAC, Type 12 Standard Cabinet Application AC Ready Cabinet These cabinets house data equipment in dusty and dirty environments. They are sealed against dripping water and dust and prevent air exchange. These cabinets are ideal to house and protect sensitive electronic equipment in an uncontrolled indoor environment. Load Rating Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman. Accessories See the Package Components table and, for AC Ready Cabinet, CR29 air conditioner specifications in the Hoffman Specifier s Guide, Thermal Management chapter. Air conditioner will be shipped separately. It cannot be factory installed. Features Three-point locking handles on all doors provides easy but controlled access. Two keys included. Fully welded frame safely supports sensitive equipment Fully gasketed to keep contaminates away from equipment, reducing maintenance costs Two sets of 19 in. rack angles support both front and rear of equipment Rack angles are infinitely adjustable from front to rear for positioning flexibility Mobile base provides easy placement of cabinet Levelers and anti-tip bracket secure cabinet to the floor Construction Welded 12 gauge steel frame with integral struts Front window door made with 16 or 14 gauge steel and safety glass window Solid 16 or 14 gauge steel back door Standard package has solid 16 or 14 gauge steel sides Standard Sizes PROLINE Type 12 Voice/Data and Server Cabinets RAL 9005 Black RAL 7035 Light Gray B C Rack Angle Package Type Nominal Size Rack Units mm in. mm in. Hole Type Standard Voice Data PDCP2078b12 pdcp2078g x 700 x pra1920tpl1 Tapped Standard Server psc20610b12 psc20610g x 600 x PRA1920thl1 Square AC Ready Voice Data PDCP2078bac pdcp2078gac 2000 x 700 x pra1920tpl1 Tapped AC Ready Server psc20610bac psc20610gac 2000 x 600 x PRA1920thl1 Square 28 Subject to change without notice PH FX Hoffman Enclosures Inc.

28 PROLINE Type 12 Voice/Data and Server Cabinets Standard Cabinets DPSR Free-Standing Cabinets Package Components Component Black Gray mm Nominal Size Frames Pfd2078B pfd2078g 2000 x 700 x 800 pfd20610b pfd20610g 2000 x 600 x 1000 Window Doors pdwg206b pdwg206g 2000 x 600 pdwg207b pdwg207g 2000 x 700 Solid Doors pds206b pds206g 2000 x 600 pds207b pds207g 2000 x 700 Solid Sides pss208b pss208g 2000 x 800 pss2010b pss2010g 2000 x 1000 Sides with AC pss208acb pss208acg 2000 x 800 cutout pss2010acb pss2010acg 2000 x 1000 Top pt78b pt78g 700 x 800 pt610b pt610g 600 x 1000 Mobile Base pbmg78b 700 x 800 pbmg610b 600 x 1000 Subject to change without notice PH FX Hoffman Enclosures Inc. 29

29 PROLINE Type 12 Voice/Data and Server Cabinets Standard Cabinets DPSR Selected Accessories See the Accessories chapter for accessory specifications and additional accessories. Accessory Name Catalog Number Air Conditioner Selection and Sizing Software Designed to assist you in determining the most suitable choices of air conditioners, heat exchangers, or fans for your application. Download a free copy of our selection software by visiting our web site: Cabinet 2000 x x 600 x 800 x 1000 Air conditioners, see next page cr29 Series Cable Trough, 19 in. Rack Mount ECT19 Drawer Pull-out, 19 in rack mount, P19DR1US 1 RU Drawer Pull-out, 19 in rack mount, P19DR2US 2 RU Drawer Pull-out, 19 in rack mount, P19DR3US 3 RU Fan Tray, 19 in. rack mount, 3 fans A19FT3b Fan Tray, 19 in. rack mount, 6 fans A19FT6b Joining Kit PJ2F Keyboard Compartment, 19 in. rack A19KBC2b mount Keyboard, Pivoting, 19 in. rack mount P19KBPVT Mini Keyboard, 19 in. rack mount P19KBSM Paint, Touch-up Black ATPB9005 Light Gray ATPG7035 Power Distribution Units (PDAs) See Cable/Power Management Power Strip Bracket, Rack Mount A19PSMB Shelves 19-in., fixed solid black P19SH68B 19-in., fixed solid black P19SH810b 19-in., fixed vented black P19VSH68B 19-in., fixed vented black p19vsh810b 19-in., pull-out black P19SHP68B 19 in., pull-out black p19shp810b Tool-less Vented Shelf for Square Hole D19FVT69B Rack Angles, mm nominal depth Tool-less Vented Shelf for Square Hole D19FVT912B Rack Angles, mm nominal depth Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU Cable Manager Arm, PHCB (Use with Pull-out shelf) Writing Surface P19WSa Vertical Cable Manager 700mm PVCM207 Vertical Cable Manager, 700 mm, PVCMX207 extra deep Vertical Cable Manager PVCMTD20 CableTek 19 in. Horizontal Cable DCHD2 Manager, double-sided, 2 RU Horizontal Cable Trough 200 mm PHCT1 350 mm PHCT2 500 mm PHCT3 650 mm PHCT4 Velcro Cable Wraps Velcro is a trademark of Velcro Industries B.V. Fastener Packages Fastener Name Cage Nut Package, 12-24, plated, Qty 20 Cage Nut Package, 12-24, plated, Qty 250 Cage Nut Package, 10-32, plated, Qty 20 Cage Nut Package, 10-32, plated, Qty 250 Cage Nut Package, M5, plated, Qty 20 Cage Nut Package, M6, plated, Qty 20 Screw Package, 10-32, plated, Qty 20 Screw Package, 10-32, plated, Qty 250 Screw Package, 10-32, black, Qty 20 Screw Package, 12-24, plated, Qty 20 Screw Package, 12-24, plated, Qty 250 Screw Package, 12-24, black, Qty 20 Screw Package, 12-24, black, Qty 250 Screw Package, M5, plated, Qty 20 Screw Package, M6, plated, Qty 20 Air Conditioner Sizing Air conditioners are appropriate for applications in which: The temperature inside the enclosure must be maintained at or below ambient temperature. Humidity must be removed from the enclosure. Ambient air contaminants must be kept out of the enclosure. The following air conditioner sizing procedure applies to uninsulated, sealed, and gasketed enclosures in indoor locations. 1. Determine the internal heat load in watts Add the maximum heat output specifications for all equipment to be installed in cabinet. Conversion: 1 Watt = Btu/Hour 2. Determine the desired temperature difference ( T) between the ambient temperature and the temperature inside the cabinet Subtract the desired maximum temperature inside the cabinet (Ti) from the maximum expected temperature (To) outside the cabinet. To - Ti = T Conversion: 1 K or C T = 1.8 F T P1224CN P1224CN250 P1032CN P1032CN250 PM5CN PM6CN AS1032 AS AS1032B ES1224 ES ES1224B ES1224B250 ASM5 ASM6 3. Determine the exposed surface area of the cabinet in ft 2 Use the following formula to determine area when H, W, and D are the cabinet dimensions in inches. 2[(H x W) + (H x D) + (W x D)] 144 = Area (ft 2 ) Conversion: If dimensions are in millimeters, substitute 1,000,000 for 144. Then multiply the result by to convert from m 2 to ft Determine the air conditioner capacity required Use the following formula. (Watts x 3.413) + [(1.25 x Area in ft 2 ) x T in F] = Required air conditioner capacity in Btu/Hr 30 Subject to change without notice PH FX Hoffman Enclosures Inc.

30 PROLINE Type 12 Voice/Data and Server Cabinets Standard Cabinets MCL CR Mid-Size Air Conditioners These air conditioners fit in the AC cutout provided in the ACready Voice/Data and Server Cabinet Packages. The air conditioners are shipped separately; they cannot be factory installed in the cabinets. Features Thermostat control and EMI/RFI noise suppressor included Closed loop cooling separates clean, recirculated air from ambient airflow system Front cover hinges open for quick access to all components Filter can be inverted to double operating time between cleanings and/or filter replacement Filterless operation possible in many applications For a typical application, unique condensate management system evaporates moisture from enclosure High performance fans and blowers are ideal for densely packed enclosures All units use a universally accepted CFC-free or environmentally safe refrigerant Mounting hardware, gasket kit, mounting template, and instruction manual furnished Finish RAL 7035 light gray polyester powder paint Industry Standards UL/cUL Listed, UL File Number SA6453 CE Maintains UL/cUL Type 12 rating when properly installed on a UL/cUL Type 12 rated enclosure. Closed Loop Cooling Recirculated air inside the air conditioner is kept separate from the ambient airflow system. This protects the electronic controls and prevents shutdowns caused by heat, humidity, dust, and other contaminants. WARNING Secure cabinet to the floor prior to installing air conditioner. Otherwise, the cabinet will tip over when air conditioner is installed. Free-Standing Cabinets Standard Sizes CR29 Series Mid-Size Air Conditioners Max Amb. Temp. ( F/ C) Shipping Weight (lb/kg) Voltage Hz Phase 131 F/131 F a 131 F/131 F 95 F/95 F a 95 F/95 F CR290216G / / / / / /55 98/44 CR290226G / / / / / /55 98/44 CR290416G / / / / / /55 118/54 CR290426G / / / / / /55 118/54 a Because air conditioners provide less cooling at lower operating temperatures, two cooling capacity ratings are provided. Top View Bottom View Front View Side View Back View 1 Service cord terminated with appropriate plug cap. Subject to change without notice PH FX Hoffman Enclosures Inc. 31

31 PROLINE-CL Colocation Server Cabinet Standard Cabinets DPSR Cable management system to isolate the wiring to each compartment Optional compact cooling fan Construction Welded 12 gauge steel frame 19-inch adjustable square hole, L-shaped rack angles front and rear Square holes spaced per EIA 310-D standards Front and rear vented 16 gauge steel door Optional 16 gauge vented window door with acrylic window Vented 16 gauge steel top 16 gauge right side barrier with two access plates Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D Application PROLINE-CL Colocation cabinets are designed for secured data centers that store multiple customers computer equipment. Oneand two-compartment cabinets are available as pre-configured packages; three- and four-compartment packages can be ordered through the ATO program. Or you can order the components and design the cabinet to fit your specific requirements. Standard components allow both pre-assembled and component cabinets to be configured with up to four separate secure compartments. Cabinets can be configured on site and reconfigured as customer needs change. The pre-assembled packages are designed to be joined together in rows. Order two side covers for each row of cabinets for a secure, finished appearance. The full line of DataCom accessories and optional PROLINE components can be added at any time. Additional components include unique locks for individual compartments and a full range of thermal management options. The two-compartment package is shown. Features Doors have locking trigger latch for easy access plus security Integral floor bolt-down brackets provide quick, secure installation Cable entry and fan mounting provision on top and two access panels on right side facilitate mounting and wiring equipment. Dual compartment pre-assembled package also includes: Colocation frame shelf to divide the frame into two secure compartments Standard Sizes PROLINE-CL Colocation Cabinet Nominal Height x Width x Depth Nominal Height x Width x Depth (in.) No. of Compartments Rack Units per Compartment PCL2C2069B 2000 x 600 x x 23.6 x PCLC2069B 2000 x 600 x x 23.6 x Subject to change without notice PH FX Hoffman Enclosures Inc.

32 PROLINE-CL Colocation Server Cabinet Components and Accessories Standard Cabinets DPSR Side for Colocation Cabinet Packages Order two sides for each row of cabinets for a secure, finished appearance. Sides are finished with RAL 9005 fine textured black polyester powder paint. PROLINE-CL Colocation Cabinet Frames Colocation cabinet frames are available in two sizes; the larger has a center divider to provide two separate compartments. Cabinet Package Nominal Height x Depth Number Needed per Cabinet Row PS209VB 2000 x Cabinet Frame A x B x C in. PF2069CLB x x (1980 x 599 x 888) PF20610CLB x x 38.9 (1980 x 599 x 988) Nominal Height x Width x Depth 2000 x 600 x x 600 x 1000 Free-Standing Cabinets PROLINE-CL Colocation Cabinet External Components Colocation cabinet external options include vented doors, with and without a window, vented tops and sides, a barrier side, a locking latch kit, a cooling fan, and a fan finger guard. Vented Top Catalog Number Fits Frame Top Width x Depth Nominal Width x Length Nominal Width x Length (in.) PTCL69B 600 x x x PTCL610B 600 x x x Fits Frame Height x Width Nominal Height x Nominal Height x Width Width (in.) Vented Door Door Type PD206VB Full 2000 x x x PD206V2B 1/ x x x PD206V3B 1/ x x x PD206V4B 1/ x x x Vented Window Door Fits Frame Height x Width Nominal Height x Width Nominal Height x Width Window Height x Width Window Height x Width Door Type (in.) (in.) PD206VB Full 2000 x x x x x PD206V2B 1/ x x x x x PD206V3B 1/ x x x x x PD206V4B 1/ x x x x x Catalog Number Description Includes PTKLDC Individually Keyed Locking Latch Two latches and two keys Set, fits all DataCom doors A4AXFNPG 4-in. Compact Cooling Fan, 115V, One finger guard and power cord 50/60 Hz agard4 Finger Guard Use on 4 in. Compact Cooling Fan Side Catalog Number Fits Frame Side Width x Depth Nominal Width x Nominal Width x Type Length Length (in.) PS209VB Vented 2000 x x x PS2010VB Vented 2000 x x x PBCL209b Barrier 2000 x x x PBCL2010B Barrier 2000 x x x PROLINE-CL Colocation Cabinet Internal Components Available colocation cabinet internal components customize the enclosure. Cable Runway Cable Type Fits Enclosure Height Fits Enclosure Height (in.) PCLCMP Power PCLCMD Data L-Shaped, Square Hole Rack Angle Fits Frame Height Fits Frame Height (in.) Door Style Height Height (in.) PRA1920THL1 Full PRA1920THL2 1/ PRA1920THL3 1/ PRA1920THL4 1/ Snap-in Blanking Panel D19BPT1RU D19BPT2RU Description 1 RU 2 RU Rack Units Frame Divider Shelf Catalog Number Fits Frame Width x Depth Shelf Width x Depth Shelf Width x Depth (in.) PFSHCL69B 600 x x x PFSHCL610B 600 x x x Tool-less Vented Shelf Description D19FVT69B For Square Hole Rack Angles, mm nominal depth D19FVT912B For Square Hole Rack Angles, mm nominal depth 19 in, Adj. Depth Rack Mt. Shelf- Type Finish Shelf Width x Depth Fits Frame Width x Depth 600 x x 1000 Shelf Width x Depth (in.) Fits Cabinet Max. Depth P19SH68 Solid Gray paint x x P19SH68B Solid Black paint x x P19SH810 Solid Gray paint x x P19SH810B Solid Black paint x x P19SHP68B Pullout Black paint x x P19SHP810B Pullout Black paint x x P19VSH68B Vented Black paint x x P19VSH810B Vented Black paint x x Subject to change without notice PH FX Hoffman Enclosures Inc. 33

33 PROLINE DataCom Configurator PROLINE Co n f i g u r at o r P30 Custom Cabinets the Easy Way The Hoffman PROLINE cabinet configurator, available on our website, makes building a cabinet to meet your unique requirements easy as You start with the enclosure size and simply follow the steps built into the configurator to design your own one-of-a-kind PROLINE cabinet. It s never been easier or more accurate. PROLINE cabinets offer the latest in storage and protection with options for voice, data, and server applications. When you re logged in with your secure ID and password, you can save your configurations. Only you can view or change it until you choose to it to someone else. When you first open the Configurator, you can choose to start new configuration, open a saved configuration, or start with a Smart Number from an earlier configuration. There are only four steps to creating a new configuration. Step 1 Select Cabinet Size Choose a cabinet size. You can select a cabinet sized either for 19 in. or 23 in. equipment., As you proceed with your selections, the system builds your unique product number, called the Smart Number. Step 2 Select Sides & Doors Look at menu lists of the available sides, doors, tops, and bases for the size cabinet you re building, and make your selections. The picture updates with each selection as a convenient check. 34 Subject to change without notice PH FX Hoffman Enclosures Inc.

34 PROLINE DataCom Configurator PROLINE Co n f i g u r at o r P30 Step 3 Select Rack Angles & Finishes Here s where you can start to customize the look and function of your new cabinet. Review your choices on the Configuration Summary The Configuration Summary lists all your choices. It shows the Smart Number and the list price for the cabinet and its accessories. You can always go back if you want to make changes. When you re satisfied, you can sign in and save your configuration, it, or download a PDF showing all the components. Free-Standing Cabinets Step 4 Select Accessories You can choose all the accessories you need to make your cabinet fit perfectly with your needs. That s all there is to it! One thing to remember. Cabinets configured and ordered through this tool are considered modified products and may not be returned. Please review Terms and Conditions on our website for details. Subject to change without notice PH FX Hoffman Enclosures Inc. 35

35 SOHO Cabinet for Small Offices and Home Offices Specialty Cabinets DNCS Front door has locking handle Same key provides access to all doors and side panels Fan cutouts with finger guards on upper half of rear door Doors and side panels inset flush with frame Open base with slotted vents includes casters Construction Welded steel frame with four rack angle mounting struts Includes two sets of painted L-shaped rack angles with holes per EIA spacing (5/8 in. x 5/8 in. x 1/2 in.) Rack angles on 600mm deep cabinet have tapped holes, and on 900mm deep cabinet have square holes Both sizes provide 11 rack units Smoke gray acrylic window in front door Solid top Application These Hoffman SOHO Cabinets are designed to house LAN and WAN networking equipment, phone and voice mail equipment, and servers in an office environment. They are easily adapted to many different applications using Hoffman rack accessories and fan kits. Factory-installed casters provide mobility for equipment access and upgrades. Sized to fit under a standard-height modular desktop, the cabinets are designed to draw cold air from the floor via louvers in the base and to exhaust hot air through the fan cutouts in the rear door. This creates a chimney effect that supplies currents of cool air to internally mounted equipment. Optional 4 inch fans can be added to further increase airflow and provide increased heat dissipation. Features Adjustable gland plate with strain relief at bottom rear of cabinet provides easy and secure cable entry Rear door and side panels have 1/4 turn key-locking latches Doors are hinged left and removable Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards EIA 310-D Patents Low Profile Handle (Design) 391,143 (U.S.) Low Profile Handle (Utility) 5,862,690 (U.S.) Accessories Most 19 in. rack accessories can be used with the SOHO cabinet. Standard Sizes SOHO Cabinet Catalog Number Description Rack Units C C (in.) Additional Rack Angles Hole Type ENC766SH 600mm deep cabinet ERA197TPLN Tapped ENC769SH 900mm deep cabinet ERA197THLN Square 36 Subject to change without notice PH FX Hoffman Enclosures Inc.

36 SOHO Cabinet for Small Offices and Home Offices Specialty Cabinets DNCS Selected Accessories See Accessories chapter for accessory specifications and additional accessories. Accessory SOHO Cabinet Accessory Name ENC766SH ENC769SH Cable Organizers ECK19H ECK19HV Cable Trough ECT19 Cage Nut Package Qty 20 P1224CN Cage Nut Package Qty 250 P1224CN250 Cage Nut Package Qty 20 P1032CN Cage Nut Package Qty 250 P1032CN250 Cage Nut Package M5 Qty 20 PM5CN Cage Nut Package M6 Qty 20 PM6CN Drawer,19-in. pullout P19DR1US P19DR2US P19DR3US Writing Surface, 19-in. P19WS b Fans, corded (max. 2) A4AXFNPG Fan Plug ACORD2 (2 fans runs on 1 cord) CableTek 19 in. Horizontal Cable DCHD2 Manager, double-sided, 2 RU Paint, touch-up ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Screw Package Qty 20 AS1032 a Screw Package Qty 250 AS a Screw Package Qty 20 ES1224 a Screw Package Qty 250 ES a Screw Package Qty 20 Black ES1224B a Screw Package Qty 250 Black ES1224B250 a Screw Package M5 Qty 20 ASM5 a Screw Package M6 Qty 20 ASM6 a Shelves, 19-in. fixed solid in. deep P19SH68B in. deep P19SH810B Shelves, 19-in. pullout in. deep P19SHP68B in. deep P19SHP810B Shelves, 19-in. fixed vented in. deep P19VSH68B in. deep P19VSH810B Free-Standing Cabinets a Requires cage nuts b Writing surface P19WS mounts on the 19 in. pullout drawer. NOTES: 1. All face-mount 19 in. accessories will mount into 19 in. cabinets. 2. Cabinet modification may be required to install panel-mount power strips. Subject to change without notice PH FX Hoffman Enclosures Inc. 37

37 Networking PC Cabinet Specialty Cabinets DNCS Construction Welded steel frame with accessory mounting struts Steel keyboard with ball-bearing pull-out slides and keylock Clear safety glass window in upper front door Louvers on lower quarter of rear door Top has one 4-inch cable entry port knockout with cap included and one 6-inch fan-ready cutout with integral finger guard Doors and side panels inset flush with frame Finish Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service. Industry Standards UL 508A, File Number E61997: Type 1 cul CSA C22.2 No. 94, File No. E61997: Type 1 NEMA Type 1 EIA 310-D (when rack angle accessory is installed) Application These Hoffman Type 1 Networking PC Cabinets are designed to house remote computers that are used for data entry and LAN and WAN access. They provide security from unauthorized access as well as physical protection. Ideal applications include light industrial, warehouse, electronic assembly, and other applications where remote network access is required. Accessories See Selected Accessories for additional accessories. Caster Kit Rack Angle for lower compartment, 19 RU Shelf for lower compartment (max. 2) NOTE: Rack Angle and Shelf cannot be used together. The upper section provides ample space for large monitors, with a clear window that allows easy viewing without opening the door. The sliding keyboard tray offers convenient storage and access to the keyboard and mouse. The lower section has space for the processor and, with the addition of an optional shelf, a printer. With the addition of the rack angle accessory, the lower compartment accepts 19 in. rack mount equipment. This cabinet is designed to draw cold air from the floor via louvers and to exhaust hot air through the top. This creates a chimney effect that supplies currents of cool air to internally mounted equipment. Optional 6 inch fans can be added to further increase airflow and provide increased heat dissipation. Features Keylocking flush door handles on both upper and lower front doors Quarter-turn keylocks on rear door, side panels, and keyboard door All locks keyed alike; two keys supplied with cabinet Front doors hinged on left; rear door can be hinged right or left Side panels easily removable Base is pre-punched for casters, which are recessed when installed. Caster kit available as an accessory. Adjustable gland plate with strain relief at bottom rear of cabinet provides easy, secure cable entry Standard Sizes Networking PC Cabinet A x B x C in. ENC1776PC x x (1752 x 700 x 600) Description 19-in. Networking PC Cabinet 38 Subject to change without notice PH FX Hoffman Enclosures Inc.

38 Networking PC Cabinet Accessories Specialty Cabinets DNCS Integral Finger Guard Selected Accessories See Accessories chapter for accessory specifications and additional accessories. Accessory Name Accessory Cable Organizer, horizontal a ECK19H Cable Organizer, horizontal-vertical a ECK19HV Cable Trough a ECT19 Drawer, 19-in. pullout, 1 RU a P19DR1US Drawer, 19-in. pullout, 2RU a P19DR2US Drawer, 19-in. pullout, 3 RU a P19DR3US Writing Surface, 19-in. b P19WS Fans, corded A6AXFNPG CableTek 19 in. Horizontal Cable Manager, doublesided, DCHD2 2 RU Paint, touchup ATPB9005 Power Distribution Units (PDUs) See Cable/Power Management Screws, Mtg. (Qty 20) AS1032 Screws, Mtg. (Qty 250) AS Shelves, 19-in. fixed solid, in. deep a P19SH68B Shelves, 19-in. pullout, in. deep a P19SHP68B Shelves, 19-in. fixed vented, in. deep a P19VSH68B Tool-less Snap-in Blanking Panel, 1 RU D19BPT1RU Tool-less Snap-in Blanking Panel, 2 RU D19BPT2RU a Rack angle accessory kit required to mount these accessories in lower compartment. Free-Standing Cabinets b Writing Surface mounts on top of 19 in. Pullout Drawer. NOTE: Cabinet modification may be required to install panel-mount PDUs. Network Cabinet Caster Kit Package of four. Fits Network Cabinet and Networking PC Cabinet. Mounts to predrilled holes in base. Recessed when installed. Load rating 350 lb. (159 kg) per caster. DLCASTERS Description Set of four double casters Networking PC Cabinet Rack Angle Provides 19 RU. Allows use of most 19 in. rack mount accessories. See Selected Networking PC Cabinet Accessories. Package includes two rack angles and mounting hardware. Required for accessories noted in Selected Networking PC Cabinet Accessories table; not compatible with EPCEQS Shelf. Catalog Number Length Length (inch) Rack Units Kit Qty. ERA1910TPL Networking PC Cabinet Shelf Steel shelf for use in the lower compartment of the Networking PC Cabinet. Compartment accommodates up to two shelves. Shelf mounts to accessory mounting struts and can be adjusted in 1 in. (25mm) intervals inside cabinet. Shelf installs without rack angles. Not compatible with ERA1910TPL. EPCEQS Description Shelf for lower compartment Subject to change without notice PH FX Hoffman Enclosures Inc. 39

39 19-inch Mini-Rack Cabinet Specialty Cabinets DEC1 Mounting surface on front of framework is recessed 33mm to allow both rack mounting and door options. The rear mounting surface is recessed 60mm. 9mm square holes in uprights accommodate cage nuts for mounting 19 in. rack equipment and accessories. Front and rear hole spacing complies with EIA 310-D / IEC for 19 in. mounting. Construction Framework is constructed from a die-cast aluminum top frame and bottom frame connected with four extruded aluminum uprights. Each upright includes two integral mounting flanges with mounting holes. Frame has a bottom opening and four rubber feet 15mm tall x 24mm diameter. Frames 20U tall have four aluminum feet 15mm tall x 30mm diameter. Includes two steel side panels 1mm thick. Side panels are removable for access and include foam gasket strips. Ground stud provided. 1.5mm steel top mounts flush on the top of the framework and closes top opening. Ground stud provided. Finish Framework and flush top are painted with a stone gray textured finish (RAL 7030). Sides are textured light gray (RAL 7035). Application Aesthetics and flexibility make the mini-rack an ideal cabinet for 19 in. equipment in an office environment. The compact mini-rack is available in heights ranging from 9U to 20U providing a rigid framework in a stylish package. Door options and accessories enhance the mini-rack s versatility. Features Mini-rack will accommodate optional doors and rear panels on either the frame front or rear Side panels are removable for access and include foam gasket strips and ground stud Side mounting holes are spaced vertically at wide spacing (same as front/rear) to accommodate accessories Industry Standards NEMA Type 1 EIA 310-D / IEC IEC 60529, IP40 Accessories Electric Heaters Fan Cooling Products Lighting Packages Power Distribution Units Standard Sizes 19 in. Mini-Rack Cabinet A a x C in. E E (in.) H H (in.) W W (in.) EMR9U x (456 x 500) EMR12U x (589 x 500) EMR12U x (589 x 600) EMR16U x (768 x 500) EMR16U x (768 x 600) EMR20U x (945 x 600) a Add 15mm (0.59 in.) for standard feet. Add 23mm (0.91 in.) for raised solid top. Add 43mm (1.67 in,) for stationary base. Add 80mm (3.15 in.) for stationary base with casters. 40 Subject to change without notice PH FX Hoffman Enclosures Inc.

40 19-inch Mini-Rack Cabinet Specialty Cabinets DEC1 Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 41

41 19-inch Mini-Rack Cabinet Components Specialty Cabinets DEC1 42 Subject to change without notice PH FX Hoffman Enclosures Inc.

42 19-inch Mini-Rack Cabinet Components Specialty Cabinets DEC1 Mini-Rack Cabinet Window Door Fits in the 33mm (1.30 in.) front recess or 60mm (2.36 in.) rear recess of door openings on a mini-rack. A 2mm thick acrylic window is attached to the door frame with spring clips. The acrylic window is clear (no tint) and is field replaceable. The extruded aluminum door frame mounts flush and provides 27mm (1.06 in.) space from the inside of the window to the rack mounting surface when installed to the front recess. The door has upper and lower hinge pins that fit into holes provided in the mini-rack. Door can be hinged on left or right. A keylocking latch is provided with 2 keys. The latch is black with a chrome lock insert. The door frame has provisions to attach a ground wire. Frame has a light gray (RAL 7035) textured finish. All mounting hardware and strips of foam gasket are furnished. Free-Standing Cabinets H H (in.) M M (in.) Fits Cabinet EMRPD9U U x 600 EMRPD12U U x 600 EMRPD16U U x 600 EMRPD20U U x 600 Mini-Rack Cabinet Solid Door Fits into the 33mm (1.30 in.) front recess or 60mm rear recess of door openings on a mini-rack. The flush door provides 32mm (1.26 in.) space from inside of door to rack mounting surface when installed in the front recess. The door is 1mm thick steel and has upper and lower hinge pins that fit into holes provided in the minirack. Door can be hinged on left or right. A keylocking latch is provided with 2 keys. The latch is black with a chrome lock insert. A ground stud is provided. The door has a light gray (RAL 7035) textured finish. All mounting hardware and strips of foam gasket are furnished. H H (in.) Fits Cabinet EMRSD9U U x 600 EMRSD12U U x 600 EMRSD16U U x 600 EMRSD20U U x 600 Mini-Rack Cabinet Raised Solid Top Replaces flush solid top to provide a 4mm (0.16 in.) ventilation opening around perimeter of top on mini-rack frame. The raised top extends mini-rack height 23mm (0.91 in.). Top is 1.5mm thick steel and mounts on steel spacers. A ground stud is provided. Finish is stone gray (RAL 7030). All mounting hardware is included. D D (in.) Fits Cabinet EMRRTC x 500 EMRRTC x 600 Subject to change without notice PH FX Hoffman Enclosures Inc. 43

43 19-in. Mini-Rack Cabinet Components Specialty Cabinets DEC1 Mini-Rack Cabinet Cover Used to close off the front or rear opening in a mini-rack when door access is not required. Fits into the recessed opening for flush installation. Cover provides 59mm (2.32 in.) space from inside of cover to rack mounting surface when installed in 60mm (2.36 in.) rear recess. Two quarterturn latches at the top and two pins in the bottom of the recessed opening secure the cover to the frame. The quarterturn latches have slotted inserts. Three rows of ventilation slots are provided near the top of the cover. A ground stud is provided. The cover is 1mm steel with a light gray (RAL7035) textured finish. All mounting hardware and strips of foam gasket are furnished. H H (inch) Fits Cabinet EMRRP12U U x 600 EMRRP16U U x 600 EMRRP20U U x 600 EMRRP9U U x 600 Mini-Rack Cabinet Base Plate Used to close off the open bottom of a mini-rack. It is a flat steel plate 1mm thick with mounting holes and three rows of ventilation slots. A ground stud is provided. Plate has a stone gray (RAL 7030) textured finish. Hardware is included for the mounting base plate into the recessed bottom exterior of a mini-rack. D D (inch) Fits Cabinet EMRBP x 500 EMRBP x 600 Mini-Rack Cabinet Base Heavy duty stationary base provides a raised platform for the mini-rack cabinet. It also closes off the open bottom in the cabinet. The stationary base is 45mm (1.77 in.) high, which elevates the mini-rack 42.5mm (1.67 in.). The base has 70mm (2.76 in.) wide corner legs with a 15mm (0.59 in.) high opening between legs. The base is 2.5mm thick steel with mounting holes, three rows of ventilation slots and four embossed holes for mounting optional casters. A ground stud is provided. Finish is stone gray textured (RAL 7030). Hardware is included for mounting the base into the recessed bottom exterior of the mini-rack. D D (inch) Fits Cabinet EMRSB x 500 EMRSB x Subject to change without notice PH FX Hoffman Enclosures Inc.

44 19-in. Mini-Rack Cabinet Accessories Specialty Cabinets DEC1 Mini-Rack Cabinet Caster Kit A set of four dual wheel casters provide mobility to the mini-rack. Casters only fit on the embossed holes provided in a stationary base. The casters and base elevate the mini-rack 80mm (3.15 in.) when installed. Wheels are 50mm (1.97 in.) diameter. Casters frames are steel with a plated finish. The non-locking casters have ball bearing pivots and hard plastic wheels. Mounting hardware is included. Four casters will support a maximum load of 530 lbs (240.4 kg). EMRCK Description 1 set of 4 casters Free-Standing Cabinets Mini-Rack and Rack Cabinet Grounding Kit Includes five copper wires 4mm square diameter with ring terminals on both ends. Wires, 170mm (6.69 in.) long, have striped green / yellow PVC insulation. Kit includes toothed washers and bolts to attach wires to frame uprights. Grounding kit meets VDE 0160 and VDE 0411 part 100. EERGDK Description 5 wires and hardware Mini-Rack Cabinet Joining Kit 19 in. electronic mini-rack cabinets can be joined by removing the adjacent side panels. Joining kit includes spacers and bolts as well as strips of foam gasket to connect two frames side-to-side. EMRGK Description Gasket and hardware Mini-Rack Cabinet Slide Rails Support heavy 19 in. subracks when they are installed in a frame. Rails attached horizontally to side openings on each side of the frame. Mounting holes are slotted to provide vertical adjustment. Flat surface of rails have slotted holes for attaching equipment. Slide rails are 2mm steel with a plated finish, furnished in pairs, and include mounting hardware. Maximum load capacity is 88 lbs. (39.9 kg) per pair. L L (in.) Fits Cabinet EMRSR mm deep EMRSR mm deep Subject to change without notice PH FX Hoffman Enclosures Inc. 45

45 19 in. Rack Cabinet Specialty Cabinets DEC1 Frame accommodates optional doors, front and rear, in any combination Optional joining kits bolt frames together for modular applications 9mm square holes in uprights accommodate cage nuts for mounting all types of 19 in. rack equipment and accessories. Front and rear hole spacing comply with EIA 310-D / IEC wide spacing for 19 in. mounting. Side mounting holes are spaced vertically at wide spacing (same as front/rear) to accommodate accessories Construction Rugged die-cast aluminum top and bottom frame connected to four extruded aluminum uprights. Each upright includes two integral mounting flanges. Two steel side covers one mm thick. Side covers are removable via quarterturn fasteners for easy access. Ground studs and foam gasket strips are provided. Louvered top (1mm thick) mounts flush on frame. Ground stud provided. Finish Frame and flush louvered top are painted with a durable stone gray textured finish (RAL 7030). Side covers are textured light gray (RAL 7035). Application This electronic rack system in a modular cabinet provides an ideal solution for 19 in. rack equipment and computer systems. It is particularly suited to those applications where aesthetics, modularity, and maximum stability in a light weight package are important. Rack mounting heights from 34U to 43U in 600mm and 800mm depth configurations are available. Door options and a broad range of accessories enhance this cabinet s versatility. Features Mounting surfaces on front and rear of frame are recessed 60mm (2.36 in.) to allow for both equipment mounting and use of all door options Bottom of frame can be left open or closed with covers. Frames provided with die-cast support feet. Industry Standards NEMA Type 1 EIA 310-D / IEC IEC 60529, IP40 Accessories Casters Electric Heaters Fan Cooling Products Joining Kits Rack Panels Standard Sizes 19 in. Electronic Rack Cabinet A a x B x C in. E E (in.) F F (in.) H H (in.) W W (in.) EER34U x x (1611 x 600 x 600) EER34U x x (1611 x 600 x 800) EER38U x x (1789 x 600 x 600) EER38U x x (1789 x 600 x 800) EER43U x x (2011 x 600 x 600) EER43U x x (2011 x 600 x 800) a Add 9mm (0.35 in.) for standard feet Add 32mm (1.26 in.) for raised solid top. Add 98mm (3.84 in.) for plinth base. Add 117mm (4.61 in.) for mobile base with casters. Add 110mm (4.33 in.) for casters mounted on frame. Add 17mm to 35mm (0.67 in. to 1.38 in.) for adjustable feet. 46 Subject to change without notice PH FX Hoffman Enclosures Inc.

46 19 in. Rack Cabinet Specialty Cabinets DEC1 Free-Standing Cabinets Subject to change without notice PH FX Hoffman Enclosures Inc. 47

47 19 in. Rack Cabinet Components Specialty Cabinets DEC1 48 Subject to change without notice PH FX Hoffman Enclosures Inc.

48 19 in. Rack Cabinet Components Specialty Cabinets DEC1 Glass Door Suitable for installing in the 60mm (2.36 in.) front or rear recessed door openings in the electronic rack. Door is full length safety glass with rounded edges and gray tint to reduce light reflection. Door can be hinged left or right with hinges attached to the upper and lower corners of the glass. Installed glass door provides 51mm (2.01 in.) from the inside of the door to the rack mounting surface. Furnished keylock latch with two keys fits through a hole in the glass and includes a protective plate on both sides of the glass. Hinges and latch are black. Plastic pads cushion the glass door when closed. All mounting hardware furnished. H H (in.) Fits Cabinet EERGD34U U x 600 EERGD38U U x 600 EERGD43U U x 600 Free-Standing Cabinets Window Door Fits in the 60mm (2.36 in.) front or rear recessed door openings in the cabinet frame. The field replaceable 2mm thick untinted acrylic window is attached with spring clips and sealed with foam tape. The extruded aluminum door frame, finished with RAL 7035 light gray textured polyester powder paint, mounts flush and provides 54mm (2.13 in.) of space from the inside of the window to the rack mounting surface. Upper and lower hinge pins on the door fit into holes in the frame. Door can be hinged right or left. Black keylock latch with chrome lock insert and two keys is furnished. Frame has provision to attach a ground cable. Strips of foam gasket and all mounting hardware are provided. Catalog Number H H (in.) M M (in.) Fits Cabinet EERPD34U U x 600 EERPD38U U x 600 EERPD43U U x 600 Solid Door Fits into the 60mm (2.36 in.) front or rear recessed door openings in frame. The flush door provides 59mm (2.32 in.) from inside of door to rack mounting surface. Door is 1mm thick steel finished with RAL 7035 light gray textured polyester powder paint. Upper and lower hinge pins fit into holes provided in the cabinet frame. Doors can be hinged right or left. Black keylocking latch with chrome lock insert and two keys is furnished. Ground stud provided. Strips of foam gasket and all mounting hardware are included. H H (in.) Fits Cabinet EERSD34U U x 600 EERSD38U U x 600 EERSD43U U x 600 Subject to change without notice PH FX Hoffman Enclosures Inc. 49

49 19-in. Rack Cabinet Components Specialty Cabinets DEC1 Rack Cabinet Raised Solid Top Replaces flush top to provide an 8mm (0.32 in.) ventilation opening around frame top perimeter. The raised top, mounted on steel spacers, extends enclosure height 32mm ((1.26 in.). Top is 1.5mm thick steel finished with RAL 7030 stone gray polyester powder paint. A ground stud is provided. All mounting hardware is furnished. D D (in.) Fits Cabinet EERRTC x 600 EERRTC x 800 Rack Cabinet Top-Mount Fan Tray Use with raised solid top or flat vented top. Heated cabinet air is drawn up and blown out through the ventilation opening in the top. Each tray includes four 77 CFM axial fans pre-wired to a 115V, 60 Hz, 54 in. (1.37mm) power cord with a 5-15A plug. Fan tray mounts flush to inside top of cabinet without using any of the 19 in. rack mounting space. Fits Cabinet EERTFT x 600 EERTFT x 800 Technical Data per Fan Measurement 115V/60 Hz At Capacity 77 cfm Noise Pressure Level 38dB(A) Max. Static Pressure.20 IWC Max. Ambient Temp. 158 F (70 C) Power Consumption 11 W Rack Cabinet Plinth Base Elevates the enclosure frame 97.5mm (3.84 in.). Base covers provide an effective barrier to the cabinet interior and are removable for transportation and cable entry. Base covers are 2.5mm steel finished with RAL 7030 stone gray textured polyester powder paint. Four corner legs are die-cast aluminum. Hardware for mounting covers and base legs is included. Catalog Number D D (in.) E E (in.) Fits Cabinet EERSB x 600 EERSB x 800 Rack Cabinet Base Plate Closes off the open bottom of the frame. Base plate consists of two flanged steel plates 1.5mm thick with mounting holes and ground stud provided. Plate finish is RAL 7030 stone gray textured polyester powder paint. Hardware is included for mounting the plates into the recessed bottom of the frame. D D (in.) Fits Cabinet EERBP x 600 EERBP x Subject to change without notice PH FX Hoffman Enclosures Inc.

50 19-in. Rack Cabinet Components and Accessories Specialty Cabinets DEC1 Rack Cabinet Mobile Base Constructed of die-cast aluminum finished with RAL 7030 stone gray textured polyester powder paint, the base fastens to the underside of the frame and provides integral mounting of furnished casters or optional adjustable feet. Base extends beyond the front and rear of 600mm cabinet to provide enhanced stability. Front and rear top surfaces of base have 3.0mm thick light gray rubber mats. Four casters provide load-bearing capacity of 1100 lbs. (499 kg). Casters and mounting hardware are furnished. Free-Standing Cabinets Fits Cabinet EERMB 600 x 600 and 600 x 800 Rack Cabinet Casters and Adjustable Feet Casters, two locking and two non-locking, mount directly to the bottom of the frame. The casters elevate the cabinet 110mm (4.33 in.). Casters are made of black polyamide material. A set of four casters will support a maximum load of 1100 lbs. (499 kg). Adjustable feet with ball and socket construction fit into the bottom of the cabinet frame or into the mobile base. Adjustable from 17mm to 35mm (0.67 in. to 1.38 in.) high. Four feet will support a maximum load of 880 lbs. (399 kg). EERAFT EERCK Description Set of four adjustable feet Set of four casters Grounding Kit Includes five copper wires 4mm2 diameter with ring terminals on both ends. Wires, 170mm (6.69 in.) long, have striped green / yellow PVC insulation. Kit includes toothed washers and bolts to attach wires to frame uprights. Grounding kit meets VDE 0160 and VDE 0411 part 100. EERGDK Description 5 wires and hardware Rack Cabinet Joining Kit Joining Kit connects two frames side-to-side once the side panels have been removed. Kit includes spacers and bolts as well as strips of foam gasket. EERGK38U EERGK34U Use with Cabinet 43U maximum 34U maximum Rack Cabinet Slide Rails Used to support heavy 19 in. subracks installed in a frame. Rails attach horizontally to openings on each side of a frame. Mounting holes are slotted to provide vertical adjustment. Flat surface of rails have slotted holes for attaching equipment if necessary. Made of 2mm steel with a plated finish. Furnished in pairs with mounting hardware included. Maximum load capacity is 88 lbs. (39.9 kg) per pair. L L (in.) Fits Cabinet EERSR mm deep EERSR mm deep Subject to change without notice PH FX Hoffman Enclosures Inc. 51

51 PROLINE Frame Components Specialty Cabinets P20, DACCY Frame Joining Kits Permit joining two enclosure frames while maintaining an environmental seal Description PJ2F Standard Frame Joining, Side-to-Side PJ2FD Standard Frame Joining, Side-to-Side, nongasketed PJ2FHF2 EMC Standard Frame Joining, Side-to-Side PJ2FF Alternate Frame Joining, Side-to-Side PJ2FBF Frame Joining, Front-to-Back Alternate Frame Joining Kit, Side-To-Side (PJ2FF) Consists of three standoffs, frame nuts, and screws, as well as gasket material. This kit facilitates frame joining when rack angles are in the front or rearmost position, or if a subpanel is in the rearmost position. Standard Frame Joining Kit, Side-To-Side (PJ2F, PJ2FD, PJ2FHF2) Consists of six frame nuts and screws, as well as gasket material (except PJ2FD is nongasketed) to maintain a dusttight and watertight seal between ganged frames. Can be used if rack angles are not in the front or rearmost positions, or if a subpanel is not in the rearmost position. Frame Joining Kit, Front-to-Back (PJ2FBF) Joining kit provides a means for joining frames front to back while maintaining a dusttight and watertight seal between frames. Permits front-to-back joining of two single-bay enclosures. This kit does not fit 1200mm or 1600mm wide frames. L Joining Bracket The L Joining Bracket, made of 10 gauge steel, is used in conjunction with the standard joining kit as additional support. Pictured hardware is included. PJB2F Description L Joining Bracket 52 Subject to change without notice PH FX Hoffman Enclosures Inc.

52 PROLINE Frame Components Specialty Cabinets P20, DACCY Frame Feet Four die-cast feet for use on the bottom of PROLINE frames that raise the frame 9.2mm. PFFM12 Description Frame Feet Free-Standing Cabinets Levelers Four post type levelers can be attached to the bottom of the frame or to a 0mm solid base. Made of plated steel with plastic caps. Height adjustable 17mm to 35mm. Ball and socket construction. Load rating of 1000 lbs (453.6 kg) maximum. PLM12 Description Post type levelers PROLINE Caster Kit A set of four casters (two locking, two non-locking) that mount directly to the bottom of a PROLINE frame, 0mm, or 100mm solid base or a console. Do not use on plinth bases. Casters elevate the enclosure 110mm (4.33 in.) when installed. Caster frames are plated steel with ball-bearing pivots. Caster wheels are made of a black polyamide material. Kit includes M12 mounting hardware. A set of four casters supports a maximum load of 1000 lbs (453.6 kg). Order separately. PC1M12 Description Set of 4 Casters Screw Packages Cage Nut Packages Screw packages are for mounting rack panels and equipment to rack angles. Cage nut packages are for use with square-hole rack angles. Color Description Pkg. Qty. AS1032 Silver x 5/8 in. combo head 20 AS Silver x 5/8 in. combo head 250 AS1032B Black x 5/8 in. combo head 20 ASM5 Silver M5 x 20mm combo head with 20 black plastic washers ASM5T Silver M5 x 12mm thread-forming 20 Phillips hex head ASM6 Silver M6 x 16mm combo head 20 ASM6250 Silver M6 x 16mm combo head 250 ES1224 Silver x 1/2 in. combo head 20 ES Silver x 1/2 in. combo head 250 ES1224B Black x 1/2 in. combo head 20 ES1224B250 Black x 1/2 in. combo head 250 Color Description Pkg. Qty. P1032CN Silver cage nut 20 P1032CN250 Silver cage nut 250 PM5CN Silver M5 cage nut 20 PM6CN Silver M6 cage nut 20 PM6CN250 Silver M6 cage nut 250 P1224CN Silver cage nut 20 P1224CN250 Silver cage nut 250 Subject to change without notice PH FX Hoffman Enclosures Inc. 53

53 PROLINE Grid Systems Specialty Cabinets DPC, DPY,P20 Mounting Channel Allows rack angles and other accessories to be positioned at any depth within the cabinet. Rails mount front to back in PROLINE frame. 14 gauge steel with RAL 9005 black polyester powder paint finish. Includes two rails, mounting hardware, and four M6 spring nuts for mounting accessories. Use hardware kit APSM6CN (package of 20 screws, washers, and spring nuts) for mounting additional rack angles or other accessories to the mounting channels. Catalog Number Description Fits Frame Depth PMU8B Mounting Channel 800 PMU9B Mounting Channel 900 PMU10B Mounting Channel 1000 PMU11B Mounting Channel 1100 PMU12B Mounting Channel 1200 APSM6CN Mounting Channel Hardware Kit Grid Straps Grid straps are 14 gauge steel with a plated finish. They are provided with specially designed rectangular holes to allow the use of cage nuts or front-loading cage nuts. Mounting holes are provided on 25mm centers. Grid straps are available with either 1 row or 3 rows of holes and are furnished in pairs. Mounting hardware to attach grid straps to the frame or to other grid straps is included. Can be mounted from front to back horizontally across the bottom or sides of the PROLINE frame Can be mounted left to right horizontally between front-to-back pairs or from the sides of the PROLINE frame Can be mounted vertically between horizontally mounted grid straps Side-to-side grid strap installation Grid strap installation with vertical and horizontal grid straps Full height vertical grid straps Hole Pattern L L (in.) Fits Frame Depth Fits Frame Width PGH1S4 One Row PGH1S5 One Row PGH1S6 One Row PGH1S7 One Row PGH1S8 One Row PGH1S9 One Row PGH1S10 One Row PGH1S11 One Row PGH1S13 One Row PGH1S17 One Row PGH3S4 Three Row PGH3S5 Three Row PGH3S6 Three Row PGH3S7 Three Row PGH3S8 Three Row PGH3S9 Three Row PGH3S10 Three Row PGH3S11 Three Row PGH3S12 Three Row PGH3S13 Three Row PGH3S17 Three Row Full Height Vertical Grid Straps Provide expanded vertical mounting positions. Made of plated steel. 25mm spacing between mounting positions with 3-row hole pattern. Use cage nuts or front-loading cage nuts. Sold in pairs. Mounting hardware included. L L (in.) Fits Frame Height PGH3S14V PGH3S16V PGH3S18V PGH3S20V PGH3S22V Subject to change without notice PH FX Hoffman Enclosures Inc.

54 PROLINE Grid Systems Specialty Cabinets DPC, DPY, P20 Free-Standing Cabinets PROLINE Fastener Packages Description Use in Used to fasten components to ASM5T M5 self-tapping screws Round holes the grid system. Packages include PGFM6 Standard Package - M6 clip nuts and bolts Rectangular holes 20 front-loading clip nuts and 20 combination-drive washer head bolts. Grounding Package is used with the rectangular holes in the PROLINE frame to provide electrical continuity between the frame and the grid system. Standard Package is used with tapped holes. M5 self-tapping screws are used with drilled holes. PGFGM6 Grounding Package - M6 clip nuts and bolts Tapped holes Subject to change without notice PH FX Hoffman Enclosures Inc. 55

55 PROLINE Rack Angles and Brackets Specialty Cabinets DPC, DPY, P20 19 in. and 23 in. Rack Angles Made of 14 gauge steel with square holes or 12 gauge steel with tapped holes. Provides 19 in. rack spacing when mounted in 600mm wide frames, and 23 in. rack spacing when mounted in 700 mm wide frames. Use with frame reducing brackets to provide 19 in. or 23 in. spacing in 700mm or 800mm wide frames. Sizes available for multicompartment colocation applications. Finish is black RAL 9005 polyester powder paint with flat finish. Furnished in pairs. The standard rack angle position is 44mm behind the door opening. Rack angles can be moved forward if desired. Deeper positions require the use of grid straps or mounting channels. For joining cabinets with rack angles in the full forward position, use joining kit PJ2FF. Shelves, drawer, guides, and pull-out shelves require two sets of rack angles or frame accessory brackets installed in the frame. NOTE: For 700 and 800mm wide cabinets, reducer or cable manager must be ordered. Square Hole Tapped Hole Description Use With Fits Frame/Cabinet Height Rack Units L L (in.) PRA1912THL1 19 in. PROLINE DataCom Packages 1200mm PRA1916TPL1 19 in. PROLINE DataCom Packages 1600mm PRA1918THL1 PRA1918TPL1 19 in. PROLINE DataCom Packages 1800mm PRA1920THL1 PRA1920TPL1 19 in. PROLINE DataCom Packages 2000mm PRA192320THL1 19 & 23 in. PROLINE DataCom Packages 2000mm PRA1922THL1 PRA1922TPL1 19 in. PROLINE DataCom Packages 2200mm PRA192322THL1 19 & 23 in. PROLINE DataCom Packages 2200mm Adjustable Rack Mounting Rails Mounting rails allow rack angles to be positioned anywhere within the PROLINE frame. The left-to-right adjustment pertains only when the enclosure is wider than the minimum width required for rack angles. Includes two right-hand and two lefthand 12 gauge G60 galvanized steel mounting rails. Mounting hardware is included. L (in.) L Fits Frame Depth PBARA PBARA PBARA Subject to change without notice PH FX Hoffman Enclosures Inc.

56 PROLINE Rack Angles and Brackets Specialty Cabinets DPC, DPY, P20 Frame Reducing Brackets for Frames or Grid Straps Frame reducing brackets mount directly to 700mm or 800mm wide PROLINE frames or to grid straps. Converts wider frames to 600mm wide, allowing 19-inch rack angles to fit, or to 700mm wide, allowing 23-inch rack angles to fit. Can be used to left- or rightjustify the rack mounted equipment. Furnished in sets of four. 14 gauge galvanized steel. Mounting hardware is included. Catalog Number Reduces Frame Width Width Width (in.) Converts Frame Width PRB50 50mm From 700 to 600, From 800 to 700mm PRB mm From 800 to 600, From 800 to 700, From 700 to 600mm PRB mm From 1000 to 600, From 1000 to 800, From 800 to 600mm Free-Standing Cabinets Frame Reducing Brackets for Frames or Mounting Channel Frame reducing brackets mount directly to 700mm or 800mm wide PROLINE frames or to mounting channel. Convert wider frames to 600mm wide, allowing 19-inch rack angles to fit, or to 700mm wide, allowing 23-inch rack angles to fit. Can be used to left or right justify the rack-mounted equipment. Made of 14 gauge steel painted with flat black RAL 9005 polyester powder. Furnished in sets of four. Mounting hardware is included. Catalog Number Reduces Frame Width Width Width (in.) Converts Frame Width PMURB50 50mm From 700 to 600, From 800 to 700mm PMURB mm From 800 to 600, From 800 to 700, From 700 to 600mm PROLINE Frame Width Rack Setting 19 in. or 23 in. Setting without Reducing Brackets Setting with Reducing Brackets For Use With: Use: Grid Straps Mounting Channels PRB50 PMURB50 PRB100 PMURB mm (23.6 in.) 19 in. centered 700mm (27.6 in.) 23 in. centered 19 in. centered 19 in. left or right PRB mm (31.5 in.) 23 in. centered 19 in. centered 19 in. left or right Subject to change without notice PH FX Hoffman Enclosures Inc. 57

57 PROLINE Swing-Out Racks Specialty Cabinets P20 Partial Swing-Out Rack Frame This 19-inch rack frame is used when a smaller medium duty swing-out frame is desired. Light weight rack equipment fits nicely into this 800mm tall swing-out frame, providing 90 degrees of rotation and increased accessibility. Side hinge brackets are used to mount the swing frame, allowing free access above and below the swing frame Used with any height enclosure and hinged on the right or left Maximum equipment load is 100 lbs. Furnished with hinges, two quarterturn latches, and mounting hardware RAL 7035 textured gray finish Complies with ANSI/EIA RS-310-D rack mounting standards Mounting holes accommodate either English or metric cage nuts, which are ordered separately Will not fit in 700mm tall enclosure Standard Sizes Partial Swing-Out Rack Frame Fits Frame Width Rack Units PSF PSF Heavy Duty Swing-Out Rack Frame Allows 19-inch rack equipment to pivot out of the enclosure frame for better accessibility. The frames mount on hinges capable of 120 degree rotation. Hinges that provide 170 degree rotation are optional. Spring loaded pivot post makes installation easy Rack frames are available for 600, 700 and 800mm wide enclosure frames Mounting supports for a 800mm wide enclosure frame permit you to either center the rack mounting frame or position it right or left. The frame can also pivot from either the left or the right for maximum flexibility. Mounting supports can be assembled to the top and bottom of the frame for full height rack mounting frames. Smaller rack mounting frames can be mounted to the vertical frame members or to the grid straps. Order separately. Furnished with hinges, two quarterturn latches, and mounting hardware RAL 7035 textured gray finish Complies with ANSI/EIA RS-310-D rack mounting standards Maximum equipment load is 300 lbs. Mounting holes accommodate either English or metric cage nuts, which are ordered separately Standard Sizes Heavy Duty Swing-Out Rack Frame Catalog H H W W Rack Fits Frame Fits Frame Number (in.) (in.) Units Height Width PSF mm or taller 600mm PSF mm or taller 700mm PSF mm or taller 800mm PSF mm or taller 600mm PSF mm or taller 700mm PSF mm or taller 800mm PSF mm or taller 600mm PSF mm or taller 800mm PSF mm or taller 600mm PSF mm or taller 800mm PSF mm or taller 600mm PSF mm or taller 700mm PSF mm or taller 800mm PSF mm tall 600mm PSF mm tall 700mm PSF mm tall 800mm NOTES: Swing-out rack frame assemblies are supplied with mounting supports. Swing-out rack frames can also be installed in right, left, or both bays of 1200mm wide frames using center uprights. Swing-out mounting supports mount to inside of frame at any vertical location. Mounting supports and swing-out frame can be located deeper into frame using grid system straps. Deeper mounting affects the degree of opening of swing-out frame. 58 Subject to change without notice PH FX Hoffman Enclosures Inc.

58 PROLINE Swing-Out Racks Specialty Cabinets P20 Standard 120 Frame Hinging Free-Standing Cabinets 120 Mounting Position Maximum Installation Depth for 600 mm Wide Enclosures M = Max Installation Depth = 216 mm (8.50 in.) Maximum Installation Depth for 700 mm Wide Enclosures M = Max Installation Depth = 394 mm (15.50 in.) Maximum Installation Depth for 800 mm Wide Enclosures Center Position M = Max Installation Depth = 394 mm (15.50 in.) Side Position M = Max Installation Depth = 514 mm (20.25 in.) Subject to change without notice PH FX Hoffman Enclosures Inc. 59

59 PROLINE Swing-Out Racks Specialty Cabinets P Hinge Kit This kit is used in conjunction with the heavy duty swing-out frame, providing for increased accessibility to the back of rack equipment. PSF170K Fits Cabinets 600mm, 700mm, and 800mm Optional 170 Frame Hinging 170 Mounting Position Maximum Installation Depth for 600mm Wide Enclosures Maximum Installation Depth for 700mm Wide Enclosures M = Max. Installation Depth = 165mm (6.50 in.) M = Max. Installation Depth = 349mm (13.75 in.) Maximum Installation Depth for 800mm Wide Enclosures Center Position M = Max. Installation Depth = 349mm (13.75 in.) Side Position M = Max. Installation Depth = 488mm (19.25 in.) 60 Subject to change without notice PH FX Hoffman Enclosures Inc.

60 PROLINE Swing-Out Racks Specialty Cabinets P20 Swing-Out Guides Description Guides can be mounted to a heavy-duty swing-out rack frame to provide extra support for rack equipment. Plated steel guides are furnished in pairs with mounting hardware included. PSFG Swing-Out Guides Free-Standing Cabinets Stop Arm Kit Description PSAK Stop Arm Kit Used with heavy-duty swing-out rack frames to lock the frame in the PSAK Stop Arm Kit open position. Consists of stop arm and mounting hardware. Filler Panel Kit Used when mounting heavy-duty swing-out rack frames in 700mm or 800mm wide frames. The filler panel occupies the extra space between the frame and the swing frame. Includes a handle and all the hardware for mounting to the swing-out rack frame. 700mm Wide Enclosure Left or Right Mounted 800mm Wide Enclosure Left or Right Mounted 800mm Wide Enclosure Center Mounted Swing Frame Height 1400mm PFPK147LR PFPK148LR PFPK148C 1600mm PFPK167LR PFPK168LR PFPK168C 1800mm PFPK187LR PFPK188LR PFPK188C 2000mm PFPK207LR PFPK208LR PFPK208C 2200mm PFPK227LR PFPK228LR PFPK228C Subject to change without notice PH FX Hoffman Enclosures Inc. 61

61 PROLINE Door Accessories Specialty Cabinets DPC, DPY, P Hinge Kit Optional hinging for steel solid, window, or disconnect doors. The 180 hinges provide up to a 260 door opening on single-bay enclosures. These hinges mount to the door flange and have a low-profile appearance. The kit includes three hinges with textured black polyester powder paint finish and all necessary mounting hardware. Cannot be used on PROLINE FloTek and ConnecTek front doors. PH180 Description 180 Hinge Kit Door Mount Fan Tray and Blocking Plate The Door Mount Fan Tray is used with perforated PROLINE doors to blow air through the perforations. Mounts to door bars. Use Blocking Plates to prevent short cycling of fans. Includes two six-inch fans and mounting plate, two finger guards, power cord, and mounting hardware. The Blocking Plate is used with the Door Mount Fan Tray to direct airflow and prevent short-circuiting. Multiple plates can be used to fill door opening and achieve desired airflow. Mounts to door bars. Includes one blocking plate and mounting hardware. Description Fits Door Width Voltage PBLNKDR6 Blocking Plate 600 PF06021DR6 Door Mount Fan Tray VAC Flush Keylocking Trigger Latch with Random Key Codes Flush design. Over 100 random key codes with available master. Black textured polyester powder paint finish. Includes two trigger latches with matching key code and two keys. Designed to replace locking trigger latch. For use on PROLINE Voice/ Data and Colocation doors only. PTKLDC Description Flush keylocking Trigger Latch with random key codes Side Cover Lock Fits in pre punched hole to secure DataCom solid side from unauthorized entry. PSCLO Description Side Cover Lock 62 Subject to change without notice PH FX Hoffman Enclosures Inc.

62 PROLINE Door Accessories Specialty Cabinets DPC, DPY, P20 Flush Swing Handles Flush handles are optional for any solid, window, or disconnect door that includes 3-point latching, except Voice/ Data and Colocation cabinets. They are ergonomically designed to provide style and function in a low profile. The handle is die-cast zinc finished with textured black polyester powder paint. Provision to add your logo is included. Handle can be installed to rotate either clockwise or counterclockwise. PFHDF PFHKBL PFHPBL PFHDBL Description Flush Handle with Defeater Keylocking Flush Handle Padlocking Flush Handle DIN Profile Flush Handle Free-Standing Cabinets Handle With Screwdriver Defeater Enclosure security is provided by the integrated tool-to-open feature that releases handle when rotated, thus allowing access to enclosure. Handle With Keylock Keylock feature locks the handle to provide security for the enclosure. When the key is in the unlocked position, the pushbutton releases handle to provide access into the enclosure. Two keys are furnished. Handle For Padlock Padlocking handle provides security when using a 5/16 padlock. Pushbutton releases handle to provide access into the enclosure. Handle With Din Profile Provision DIN flush handle is provided with the option to add your DIN profile lock (see DIN Lock, below) or to accept Hoffman DIN Keylock PDKL (order separately, see DIN Lock, below). DIN Lock The DIN profile lock provides keylocking security for the flush swing handle with DIN provision. Includes profile lock and two keys. Order one profile lock for each handle. DIN Lock Kit for PROLINE DataCom doors includes two locks keyed alike with one of 100 different key codes and two keys (master key available). Description PKOSLFH Slotted insert profile cylinder PKOTM7FH 7mm triangle insert profile cylinder PKOSM7FH 7mm square insert profile cylinder PKOTM8FH 8mm triangle insert profile cylinder PKOSM8FH 8mm square insert profile cylinder PKODBK3FH Double-bit 3mm insert profile cylinder PDKL DIN keylock, 2 keys included PDKLRKPR DIN Lock Kit for PROLINE DataCom doors L Handle The L handle is a stylish option for any solid, window, or disconnect door, except Voice/Data or Colocation cabinets. It can be installed to rotate either clockwise or counterclockwise. Handle includes keylocking provision and is finished with textured black polyester powder paint. Two keys are included. The handle permits your logo to be inserted. PLHK Description L Handle with 2 keys and logo slot Subject to change without notice PH FX Hoffman Enclosures Inc. 63

63 PROLINE Fan and Vent Tops Specialty Cabinets DPC, DPY, P20 Fan Plate These fan plates replace the standard plates provided with the Cable Entry Top. They include one or two pre-mounted fans with single power cord. 16 gauge steel with RAL 9005 black polyester powder paint finish on plate. Includes mounting hardware. UL/cUL Listed, File No. E Description Voltage Airflow cfm PFA06021MP Two 6 in. fans 115 VAC 480 PFA10011MP One 10 in. fan 115 VAC 560 Fan Plate Pagoda Exhaust Vent Pagoda exhaust vents can be field-installed on any PROLINE solid top. An axial fan and finger guard are mounted in a housing. A drip-proof raised cover is removable from inside the enclosure. Gasket and mounting hardware are included. Vent housing and raised cover are 14 gauge steel finished with RAL 7035 textured gray polyester powder paint. Description Voltage PPT1 Leadwires 115 PPT1C Power cord 115 PPT2 Leadwires 230 High Performance Pagoda Exhaust Vent Two rectangular cutouts for wire entry are covered by removable plates with knockouts for two 4-in. fans. Made of 16 gauge steel with RAL 9005 black textured polyester powder paint finish. Description Voltage Use With PPTHP1 Leadwires 115 Top with high performance pagoda vent cutout PPTHP1C Power cord 115 Top with high performance pagoda vent cutout PPTHP1EMC Power cord 115 Top with high performance pagoda vent cutout on EMC enclosures PPTHP2 Leadwires 230 Top with high performance pagoda vent cutout PPTHP2EMC Power cord 230 Top with high performance pagoda vent cutout 64 Subject to change without notice PH FX Hoffman Enclosures Inc.

64 PROLINE Bases and Levelers Specialty Cabinets DPC, DPY, P20 Mobile Base Mobile bases fit 600 and 800mm wide frames. They extend beyond the front and rear of 600mm cabinets to provide enhanced stability. Provides front extension only on 800mm cabinets. Constructed of steel finished in RAL 9005 textured black polyester powder paint. The base fastens to the underside of the frame and provides integral mounting of furnished casters. The front and rear top surfaces of the base are trimmed with black rubber mats 3mm thick. Four non-locking casters provide a load-bearing capacity of 1000 lbs (499.0 kg). Casters and mounting hardware are furnished. Catalog Number Height (in) Height Width (in) Width Fits Frame B x C PMB x 500 and 600 x 600 PMB x 800 and 600 x 900 PMB x 500 and 800 x 600 PMB x 800 and 800 x 900 Free-Standing Cabinets Mobile Base Leveling Kit Levelers mount in the outer corners of the mobile base, providing load-bearing capacity of 1000 lbs (453.6 kg). Description Use With PMBLM12 Mobile Base Leveling Kit Mobile Base Subject to change without notice PH FX Hoffman Enclosures Inc. 65