1.866.TRY.GLCC WeRackYourWorld.com

Transcription

1 1.866.TRY.GLCC WeRackYourWorld.com

2 reat Lakes Cable Management Solutions provide data center managers with a number of enclosure and rack options to support large networks of switches, servers, and patch panels. The Enhanced Networking (EN) Enclosure provides cable management and cooling support for high density networking and switch applications. Large amounts of open area outside of the rails, repositionable sections of plastic cable fingers, and knockouts can easily accommodate the needs of switches and patch panels. ES Server Enclosures and E Series Enclosures are designed to meet the needs of servers, switches, data, electrical and telecom equipment. Both are available in a variety of sizes and all are engineered to be easily upgraded as needed. An extensive line of accessories and cable management products are available to accommodate future equipment upgrades, or changes in enclosure function within the data center. Great Lakes new Enhanced Rack (ER) Series features Variable Depth 4 Post Racks, Cable Management Racks, and a number of accessories that can be combined to create complete data center solutions. The ER Series features a variety of cable management to support switches and servers; as well as full height baffles and side panels for proper equipment airflow.

3 THE EN ENCLOSURE IS CAPABLE OF HANDLING SIMPLE TO COMPLEX DATA, SWITCH, SERVER, AND CABLE MANAGEMENT REQUIREMENTS. THE EN IS AVAILABLE IN A VARIETY OF SIZES AND CONFIGURATIONS, WITH MANY ENCLOSURE SIZES ABLE TO SHIP WITHIN HOURS AFTER RECEIPT OF ORDER. The EN Series Enclosure is designed to support side airflow equipment from a number of manufacturers and meets all minimum clearance requirements as specified by CISCO. (The GL840ENT-3242 (84"H x 32"W x 42"D, pictured below, describes common features across all EN sizes.) 1. EN Frame No corner posts; creates room for large cable bundles outside of rails Ganged together at top of frame 2. Top Cable Access Large knockouts for top cable; use optional brush grommet to cover knockouts Ladder Rack Brackets easily support ladder rack and large cable bundles Top cable troughs also available 3. Rails Two sets of tapped #10-32 mounting rails (3/8" sq. (M6) rails also available) Front rails are fixed and recessed 6.5" from front of enclosure (8" in 48"D enclosures) Rear rails are fully adjustable Maximum rail spacing of 29" (32" in 48"D enclosures) Flexible Mounting Profile (FMP) allows mounting of accessories that do not interfere with EIA pattern; mount cable rings, fingers, and Zero-U brackets (used to patch panels, 19" power strips, etc.) 4. Cable Management Fingers Fingers, made up of 7 RMU sections, pre-installed on all rails Finger openings align with RMUs for easy cable pathways Finger section are repositionable Additional kits of 7 RMU finger section also available 5. Baffle Kit Optional baffle kits direct cool air in and exhaust air out of side-to-side airflow equipment Solutions for Cisco, Brocade, and Juniper available Easily mounts to rails with no tools 6. PDU Brackets One pair of brackets installed on both rear rails Easily repositionable to accommodate various PDU sizes WeRackYourWorld.com

4 Optional Cable Management Accessories Overhead accessories, including troughs and ladder rack brackets Horizontal cable manager for front-to-rear cables 19" Cable Organizers Power & Grounding PDU Mounting brackets allow button mounting of major industry PDUs Optional zero RMU mounting brackets allow vertical mounting of 19" power strips Grounding kit with quick disconnect wires are included with each EN configuration Exhaust baffle made transparent for demonstration. Ganged Enclosures EN Enclosures are designed so that the front doors open to the left or right. When two enclosures are ganged together, doors can open in opposite directions, creating a large space where cables are easily accessible and able to be routed up, down, or to the next enclosure. Cooling Options Filler panels and brush grommet kits prevent bypass airflow within the enclosure Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as Cisco. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side.

5 Complete Enclosure* Frame and Doors* Frame Only* The EN Enclosure is available in any combination of the following heights, widths, and depths: Height Width Depth 91"H / 48 RMU 40" 48" 84"H / 45 RMU 32" 40" 78"H / 42 RMU EN Enclosures are available in three configurations: Complete Enclosure Includes EN frame with #10-32 or 3/8" sq. (M6) rails, cable management fingers on all rails, 8 levelers, solid sides, solid top panel, split mesh front and rear doors on 40"W enclosures (single mesh front and split mesh rear door on 32"W enclosures), and grounding kit *Shown with optional baffle kit Frame & Doors Includes EN frame with #10-32 or 3/8" sq. (M6) rails, cable management fingers on all rails, 8 levelers, solid top panel, split mesh front and rear doors on 40"W enclosures (single mesh front and split mesh rear door on 32"W enclosures), and grounding kit (sides not included) *Shown with optional baffle kit Frame Only Includes EN frame with #10-32 or 3/8" sq. (M6) rails, cable management fingers on all rails, 8 levelers, and grounding kit (doors and sides not included) *Shown with optional baffle kit WeRackYourWorld.com

6 MULTIPLE SIZES AND A DIVERSE PORTFOLIO OF ACCESSORIES MA CAPABLE OF PROVIDING SUPPORT FOR SERVERS AND NETWORK OPTIONS, VERTICAL ORGANIZERS, AND UNIQUE PRODUCTS T ES enclosures are available in the following sizes: HEIGHT: 91"H / 48 RMU 84"H / 44 RMU 78"H / 42 RMU 48"H / 24 RMU (only available with 24"width and 42"depth) WIDTH: 24"W (ideal for servers); 30"W (The extra width around the mounting rails provide space for cable management, making this ideal when mounting patch panels and networking equipment) DEPTH 42"D (42" provides space in the rear of the enclosure to mount a combination of up to 3 vertical cable troughs and PDUs) 48"D (48" provides space in the rear of the enclosure to mount a combination of up to 5 vertical cable troughs and PDUs)

7 KE THE ES SERIES GREAT LAKES MOST FLEXIBLE ENCLOSURE, ING APPLICATIONS. ACCESSORIES INCLUDE OVERHEAD CABLE O ACCOMMODATE NEARLY ANY CABLING REQUIREMENTS. 1. TOP CABLE TROUGH No overhead infrastructure changes are needed to support overhead cables 6.5"W trough 2. LADDER RACK BRACKETS No overhead infrastructure changes are needed to support overhead cables Available in 3" fixed height or adjustable brackets ( " and 14-24") 3. EXTERNAL CABLE MANAGER Two adjustable, vertical troughs (front and rear) Fingers easily pass cables from enclosure to side car Repositionable cable management posts create separate pathways for large bundles Large openings to run cable front-to-rear Multiple attachment points for cable straps 4. CABLE MANAGEMENT FINGERS Fingers made up of 7 RMU sections Finger openings align with RMUs for easy cable pathways Available in single sections or kits of 12 or 24 sections 5. BOTTOM CABLE ACCESS Large cable bundles easily pass through bottom of enclosure Brush Grommet Bottom Panel (not pictured) available to isolate airflow Raised floor grommets (not pictured) seal floor tile cutouts while allowing cables to pass through 6. HORIZONTAL TROUGH Route larger bundles from front to rear Can be placed in any vertical location (when not used with vertical lacing bar kit on same side of enclosure) 7. CABLE RINGS 3"W x 5"D rings support large bundles Mounts to rails without interfering with EIA pattern Rings can be used alone, or all 5 create a virtual cable trough 8. VERTICAL CABLE TROUGH Safely routes bundles vertically in the enclosure Up to 2 (in 42"D enclosure) or 3 (in 48"D enclosure) fit in each rear corner of enclosure Can also be installed in front of enclosure (by using horizontal lacing bars) 3"W x 2.5"D trough Optional cover to protect cable 9. LACING BARS Vertical bar fully adjustable front-to-rear Horizontal bars can be placed in any necessary location Horizontal & vertical slots as attachment point for cable straps 4" wide vertical and horizontal bars 10. PDU Mounting Brackets One pair of brackets installed in each rear corner Button mounting allows PDUs from nearly all manufacturers to be installed Brackets allow the mounting of PDUs, VCTs, or a combination of the two (the width of PDUs will determine how many PDUs and VCTs can actually be installed) RAILS: Each ES enclosure features four fully adjustable mounting rails, available in 3/8" sq. or # Our proprietary Flexible Mounting Profile (FMP) is a series of holes along the rail, but outside of the EIA pattern. The FMP allows accessories such as cable fingers to be directly mounted to the rail. Great Lakes Zero-U (ZR) brackets can also mount to the FMP, allowing installation of 19" rack mount equipment without taking up valuable RMU space. NEW CABLE MANAGEMENT BARS! Horizontal and vertical cable management bars can be configured with cable rings and straps to create a cable management solution where it is needed most. All bars are punched with a pattern of square holes where plastic rings and strap holders can be snapped into place. Look for the release of our new cable management bars in 2015! ZR Brackets Cable Fingers WeRackYourWorld.com

8 Variable Depth Four Post Rack CMR-45U16 Great Lakes new Enhanced Rack (ER) Series features variable depth 4 post racks and cable management racks that can be combined with cable managers and baffle kits to create complete data center solutions. Vertical Cable Managers support high density cable bundles while full height baffles provide proper airflow for side-to-side switch equipment. Flat-pack design means multiple racks can be stored and deployed as needed. Variable Depth 4 Post Rack Variable depth from 24-36", in one-inch increments 84"H, 45 RMU Available with 3/8" sq. (M6) or #12-24 mounting RMU labels included 1500 lb. weight capacity Front, side, and rear of all channels feature the FMP which allows for installation of cable management and other accessories Variable Depth Heavy Duty 4 Post Rack (not pictured) Variable depth from 24-36", in one inch increments 84"H, 45 RMU Available with 3/8" sq. (M6) or #12-24 mounting RMU labels included 2000 lb. weight capacity CMR-45U16 Cable Management Rack Designed for 16.25" mounting brackets (as provided by switch manufacturers such as Cisco) 84"H, 45 RMU #12-24 mounting rails with RMU labels 19" mounting, adjustable to 23" 2000 lb. weight capacity Includes 12 sections of fingers for installation on any 2 rails Top front and rear waterfall brackets with a 3" bend radius for CAT6 cable CMR-45U Cable Management Rack 84"H, 45 RMU #12-24 mounting rails with RMU labels 19" mounting, adjustable to 23" 1500 lb. weight capacity Rotating Cable Rings on front and rear rails Top front and rear waterfall brackets CMR-45U

9 GREAT LAKES 5. CABLING SOLUTIONS PDU Mounting Brackets ENHANCED RACK (ER) SERIES 1. Variable Depth 4 Post Rack 2. Variable Depth Heavy Duty 4 Post Rack 3. CMR-45U16 Cable Management Rack 4. Rack Side Panel Used at the end-of-row rack to prevent bypass air Attaches to 4 post variable depth racks 5. ER Ladder Rack Bracket Variable height from 4-8" in 1" increments Supports 12-24"W ladder rack 3" bend radius for CAT6 cable Can mount to Variable Depth Racks, CMR-45U16 and CMR-45U cable management racks 6. 8" Vertical Cable Manager 84"H x 8"W x 8"D channel Dual hinged cover for left or right opening Plastic manager and covers Ability to add cable spool and cable retainers Available as a front only or front/rear configuration 9 19" Organizers 5" Vertical Cable Manager (not pictured) 84"H x 5"W x 5"D channel Snap-on cover Plastic manager and covers Ability to add slack loop organizers and cable retainers Available as a front only or front/rear configuration 7. Equipment Support Frames Easily mounts to provide extra support for heavy switches Fixed bracket available for the CMR-45U16 Variable depth bracket available for 4 Post Racks set between 24-29" 8. 12" Vertical Cable Manager 84"H x 12"W x 12"D channel Dual hinged door for left or right opening Metal channel with plastic fingers Able to mount between two racks, or at the end of a row Can mount to variable depth racks, 2 post racks, and CMR-45U16 cable management racks 9. Side Airflow Baffle and Support Frame Full height baffles that direct cool air in and exhaust air out of side-to-side airflow equipment Hinges allow baffle to adjust to any angle or depth (to accommodate racks set at any depth) Laser knockout with brush grommet allow cable pass through while preventing bypass airflow Support Frame used when baffle is needed at the end of a row PDU Mounting Brackets (shown at right) Mount to the FMP of the rails (available with 2 or 3 positions) Button mounting allows PDUs from nearly all manufacturers to be mounted Cable Organizers & Accessories (shown at right) Complete any cable management job with Great Lakes standard accessories: 19" organizers Cable fingers Cable rings and posts WeRackYourWorld.com Cable Fingers Cable Rings 10

10 Great Lakes standard 2 and 4 Post racks can be configured with a variety of vertical and horizontal cable organizers. Racks feature a 1500 pound weight capacity, making the racks ideal for small to large jobs. Standard 2 and 4 post racks are stocked and ready to be shipped when needed! 2 Post Racks 84"H, 45 RMU 3" channels, tapped #12-24 front and rear Black anodized finish (not powder coated) so that mounting holes are cleanly drilled, allowing for quick screw insertion Also available in silver mill finish 1500 lb. weight capacity Compatible with 5, 8, and 12" vertical cable managers Additional racks available from 36"H, 17 RMU to 108"H, 59 RMU* 4 Post Racks 84"H, 45 RMU Available in 24, 29, 32, and 36" depths 3/8" sq. (M6) or tapped #12-24 mounting 1500 lb. weight capacity Compatible with 5, 8, and 12" vertical cable managers Additional racks available from 36"H, 17 RMU to 108"H, 59 RMU* *These are not stocked product. Please call for our best lead time. Vertical Cable Managers can be combined with additional accessories to better accommodate the cabling needs of switches and patch panels: 1. 8" Vertical Cable Manager 2. 5" Vertical Cable Manager 3. Cable Retainers 4. Cable Spool 5. Slack Loop Organizer 6. 19" Cable Organizers Great Lakes Rack & Stack Program allows racks to be preconfigured with Great Lakes accessories (or customer-supplied parts) and available for immediate shipment. Please call TRY.GLCC for more information.

11 VCM12-FO Vertical Front Only Cable Manager, 12" Channel x 80"L; metal brace with plastic "fingers"; includes dual hinged metal door Cable fill rate at 50%: CAT5e, 1165; CAT6, 746; CAT6A, 518 VCM8-FR Vertical Front & Rear Cable Manager, 8" Channel x 80"L; includes 4 spools, 12 wire retainers, and black hinge cover; plastic Cable fill rate at 50%: CAT5e, 1019; CAT6, 652; CAT6A, 453 VCM8-FO Vertical Front Only Cable Manager, 8" Channel x 80"L; includes 2 spools, 6 wire retainers, and black hinge cover; plastic Cable fill rate at 50%: CAT5e, 510; CAT6, 326; CAT6A, 226 VCM5-FR Vertical Front & Rear Cable Manager, 5" Channel x 80"L, and black snap-on cover; plastic Cable fill rate at 50%: CAT5e, 398; CAT6, 255; CAT6A, 177 VCM5-FO Vertical Front Cable Management, 5" Channel x 80"L, and black snap-on cover; plastic Cable fill rate at 50%: CAT5e, 199; CAT6, 127; CAT6A, 88 Note: The VCM5-FO will not work with standard, fixed depth 4 post racks. LRB-12A1 Single Height Adjustable Bracket ( "); supports 12"W ladder rack LRB-12A2 Single Height Adjustable Bracket (14-24"); supports 12"W ladder rack LRB-24A1 Single Height Adjustable Bracket ( "); supports up to 24"W ladder rack LRB-24A2 Single Height Adjustable Bracket (14-24"); supports up to 24"W ladder rack LRB-12 Single Ladder Rack Bracket; to support 12"W ladder rack LRB-24 Single Ladder Rack Bracket; to support up to 24"W ladder rack TCT24 Top Cable Trough with hardware for 24"W ES Enclosures; 6.50"W x 4"D x 24"L Cable fill rate at 50%: CAT5e, 207; CAT6, 132; CAT6A, 92 TCT30 Top Cable Trough with hardware for 30"W ES Enclosures; 6.50"W x 4"D x 30"L Cable fill rate at 50%: CAT5e, 207; CAT6, 132; CAT6A, 92 TCT32 Top Cable Trough with hardware for 32"W EN Enclosures; 6.50"W x 4"D x 32"L Cable fill rate at 50%: CAT5e, 207; CAT6, 132; CAT6A, 92 TCT40 Top Cable Trough with hardware for 40"W EN Enclosures; 6.50"W x 4"D x 40"L Cable fill rate at 50%: CAT5e, 207; CAT6, 132; CAT6A, 9 ESC-K12 Cable Management Rail Kit; includes 12 sections of fingers Cable fill rate at 50% (per RMU): CAT5e, 51; CAT6, 33; CAT6A, 23 ENC-K24 Cable Management Rail Kit; includes 24 section of fingers Cable fill rate at 50% (per RMU): CAT5e, 51; CAT6, 33; CAT6A, 23 CM-47 Single section of fingers (7 RMU) Cable fill rate at 50% (per RMU): CAT5e, 51; CAT6, 33; CAT6A, 23 CMP Single Cable Management Post, 3"H CMP-8 Package of 8 Cable Management Posts CM-11 Cable Management Ring Kit, includes five rings, inner dimensions 3"W x 5"D Cable fill rate at 50%: CAT5e, 119; CAT6, 76; CAT6A, 53 CM-13 Single Cable Ring, inner dimensions 1.06"W x 2.80"D Cable fill rate at 50%: CAT5e, 24; CAT6, 15; CAT6A, 11 CM-44 Single Cable Ring, inner dimensions 3.80"W x 3.80"D; used with aluminum uprights Cable fill rate at 50%: CAT5e, 115; CAT6, 74; CAT6A, 51 CM-425 Heavy Duty Cable Ring, inner dimension 2.30"W x 3.80"D; used with aluminum uprights Cable fill rate at 50%: CAT5e, 70; CAT6, 45; CAT6A, 31

12 CM-07 CM-04 CM-08 CM-15 CM-16 CM-17 Waterfall Cable Organizer for 19" mounting, 1 RMU Cable fill rate at 50%: CAT5e, 52; CAT6, 33; CAT6A, 23 Interbay Cable Organizer, 4 front horizontal rings (3.25"W x 2.80"D), 2 RMU Cable fill rate at 50%: CAT5e, 72; CAT6, 46; CAT6A, 32 Standard Front Cable Organizer, 4 horizontal and 4 vertical rings (1.75"W x 3.75"D), 2 RMU Cable fill rate at 50%: CAT5e, 52; CAT6, 33; CAT6A, 23 Double Sided Cable Organizer with plastic fingers, 2 RMU, 3" x 3"; includes cover Front Cable fill rate at 50%: CAT5e, 72; CAT6, 46; CAT6A, 32 Rear Cable fill rate at 50%: CAT5e, 36; CAT6, 23; CAT6A, 16 Plastic Horizontal Cable Organizer, 1 RMU, 1.5" x 3"; includes cover Cable fill rate at 50%: CAT5e, 36; CAT6, 23; CAT6A, 16 Plastic Horizontal Cable Organizer, 2 RMU, 3" x 3"; includes cover Cable fill rate at 50%: CAT5e, 36; CAT6, 23; CAT6A, 16 VCT-91 VCT-84 VCT-78 Vertical Cable Trough for 91"H ES Enclosure; 76"H x 3"W x 2.5"D Cable fill rate at 50%: CAT5e, 60; CAT6, 38; CAT6A, 27 Vertical Cable Trough for 84"H ES Enclosure; 68"H x 3"W x 2.5"D Cable fill rate at 50%: CAT5e, 60; CAT6, 38; CAT6A, 27 Vertical Cable Trough for 78"H ES Enclosure; 62"H x 3"W x 2.5"D Cable fill rate at 50%: CAT5e, 60; CAT6, 38; CAT6A, 27 VLB-4832 Vertical Lacing Bar Kit for GL480E-2432 Enclosure Only VLB-4836 Vertical Lacing Bar Kit for GL480ES-2442 Enclosure Only VLB-7232 Vertical Lacing Bar Kit for 72"H x 32"D E Enclosures VLB-7236 Vertical Lacing Bar Kit for 72"H x 36"D E Enclosures VLB-7836 Vertical Lacing Bar Kit for 78"H x 42 and 48"D ES Enclosures VLB-8432 Vertical Lacing Bar Kit for 84"H x 32"D E Enclosures VLB-8436 Vertical Lacing Bar Kit for 84"H x 36", 42" and 48"D E/ES Enclosures VLB-9136 Vertical Lacing Bar Kit for 91"H x 42 and 48"D ES Enclosures Note: All Lacing Bar Kits include one vertical bar, two horizontal bars, and six 12" long cinch straps SC SC68448 SCP8448 SC SC68442 SCP "W External Cable Manager, for use with 84"H x 48"D ES Enclosures 6"W External Cable Manager, for use with 84"H x 48"D ES Enclosures End Panel for 84"H x 48"D External Cable Managers 12"W External Cable Manager, for use with 84"H x 42"D ES Enclosures 6"W External Cable Manager, for use with 84"H x 42"D ES Enclosures End Panel for 84"H x 42"D External Cable Managers CM-01 CM-06 Cinch Strap with buckle and grommet, 12"L x ¾"W, blue Cinch Strap with buckle and grommet, 6"L x ¾"W, black ZR1 Zero RMU Bracket Kit (mounts to FMP) to mount 19" EIA equipment; mounts 1 RMU equipment ZR2 Zero RMU Bracket Kit (mounts to FMP, to mount 19" EIA equipment; mounts 2 RMU equipment Note: Cable fill rates are determined by outside diameter (OD) of cables: CAT5e OD, 0.2; CAT6 OD, 0.25; CAT6A OD, Fill rates will vary depending on brand, type, and size of cable. WeRackYourWorld.com

13 Dublin, Ireland Székesfehérvár, Hungary Reno, NV Edinboro & Corry, PA Marion, NC Naples, FL WeRackYourWorld.com CORPORATE HEADQUARTERS Edinboro, PA Phone: Fax: GREAT LAKES INTERNATIONAL LTD. Dunshaughlin Co. Meath Ireland Phone: Fax: gli@greatcabinets.com GREAT LAKES MANUFACTURING, INC. Corry, PA Phone: Fax: glm@greatmanufacturing.net GREAT LAKES HUNGARY KFT Székesfehérvár, Hungary Phone: Fax: gli@greatcabinets.com WESTERN DISTRIBUTION Reno, NV Phone: Fax: glcc@greatcabinets.com SOUTHEAST DISTRIBUTION Naples, FL Phone: TRY.GLCC Fax: glcc@greatcabinets.com Corporate Sponsor ETSI Associate Member REV 4