SHARYN MODEL FRAMELESS GLASS PASS-THRU WINDOW

Size: px

Start display at page:

Download "SHARYN MODEL FRAMELESS GLASS PASS-THRU WINDOW"

Mervin Dean
6 years ago
Views:

1 INSTALLATIN INSTRUCTINS SHARYN MDL FRAMLSS GLASS PASS-THRU WINDW FR /4 (6 MM) GLASS Counter provided by others 503. Vernon Avenue, Los Angeles, CA Phone: (800) XT Fax: (800) crlaurence.com mail: M06

2 SHARYN MDL PASS-THRU WINDW RDR F ASSMBLY AND INSTALLATIN PARTS IDNTIFICATIN... 3 SPCIFICATINS... 4 GLASS FABRICATIN... 4 XX MDL (TW SLIDING PANLS) ASSMBLY Install Roller Assemblies... 5 Install Door Hardware... 6 XX MDL (TW SLIDING PANLS) INSTALLATIN Install verhead Track... 7 Hang Doors... 7 Install Guides... 8 Install Self-Adhesive Bumpers... 8 X R X MDL (N SLIDING PANL AND N FIXD PANL) ASSMBLY... 9 Install Roller Assemblies... 9 Install Door Hardware... 9 X R X MDL (N SLIDING PANL AND N FIXD PANL) INSTALLATIN Attach Fixed Lite Header to verhead Track... 0 Mount verhead Track... 0 Mount Bottom Rail Directly Below Fixed Lite Header... 0 Install Fixed Lite... Install Sliding Door... Install Guides... Install Self-Adhesive Bumpers... IMPRTANT: RAD THIS MANUAL THRUGHLY BFR BGINNING INSTALLATIN. Contact the CRL Transaction Hardware Department at (800) XT or transaction@crlaurence.com for questions.

3 SHARYN MDL PASS-THRU WINDW PARTS IDNTIFICATIN NT: Sharyn is designed for /4 (6 mm) glazing only. Counter provided by others. SH48480X_ SH4848X0_ SH4848XX_ Kit Contains: G DIN IT DL FIX SLI 4 R D L D G IN LID S FIX R D 4 IT pening Size 48 x 48 (9 x 9 mm) X Frameless Pass-Thru SHCX0_ IN D SLI IT L D FIX verhead Track Fixed Lite Header Fixed Lite Bottom Rail Roller Assemblies uter Guides / Bumpers Glass Panels (ptional) G IN LID S R D Push Button Mounting (Standard) D45 Inner Guide #6 X 3/4 FHP Black Sheet Metal Screws (Used XX models only) 4 D4_ LK50_ Keyed Mounting (ptional) CB Clear Protective Self-Adhesive Bumpers uter Guides / 8 Bumpers Glass Panels Included SHCXX_ Kit Contains: verhead Track 4 Roller Assemblies ID RS M ST IDING U C SL SID RK CL IDING SL Inner Guide uter Guides / 8 Bumpers Glass Panels (ptional) Custom Size Max pening 70 W x 60 H (778 mm W x 54 mm H) XX Frameless Pass-Thru D6_ verhead Track Inner Guide pening Size 48 x 48 (9 x 9 mm) XX Frameless Pass-Thru verhead Track Fixed Lite Header Fixed Lite Bottom Rail Roller Assemblies uter Guides / Bumpers Glass Panels (ptional) Custom Size Max pening 70 W x 60 H (778 mm W x 54 mm H) X Frameless Pass-Thru Roller Assembly Clamp ( per Sliding Panel) LK49_ ID RS M G T S N CU SLIDI Custom Size Max pening 70 W x 60 H (778 mm W x 54 mm H) X Frameless Pass-Thru /8 Allen Wrench Required (not included) IT DL FIX K67_ 4 Roller Assemblies SID RK CL IDING SL Kit Contains: Kit Contains: GD verhead Track pening Size 48 x 48 (9 x 9 mm) X Frameless Pass-Thru SHC0X_ 4 verhead Track Fixed Lite Header Fixed Lite Bottom Rail Roller Assemblies uter Guides / Bumpers Glass Panels Included R Kit Contains: Kit Contains: verhead Track Fixed Lite Header Fixed Lite Bottom Rail Roller Assemblies uter Guides / Bumpers Glass Panels Included D63_ Fixed Lite Header #6 X / FHP Zinc d Sheet Metal Screws LK5_ D8 / (Standard) C D63 Bottom Rail PSB5 Setting Blocks (Used X, X models only) ar e Cle licon t Si alan Se Clear Silicone Sealant 3 unce Tube Nozzle (Used X, X models only) uter Guides #6 X 3/4 FHP Black Sheet Metal Screws CRL6 Tapered nd Plastic Stick Tool (Used X, X models only) 3

4 CUSTMR SID SLIDING SLIDING SHARYN MDL PASS-THRU WINDW SPCIFICATINS NT: rder custom units by the opening size. The Header is cut /6 ( mm) less than the opening width. The Header for Standard 48 (9 mm) Kits is 47-5/6 (8 mm) wide. Maximum recommended Sliding Panel width is 36 (94 mm). Recommended Maximum Wall pening Height 49-3/4 (64 mm) -/ (64 mm).394 (0 mm).467 ( mm).394 (0 mm).8 (7 mm).45 ( mm).8 (7 mm) (0 mm) (7 mm) (7.8 mm) Sliding Door X Sliding Door X Fixed Lite Sliding Door X Sliding Door X Fixed Lite SH4848XX, SHCXX Right Hand Sliding Door is Closest to Unless therwise Specified. GLASS FABRICATIN W pening Size Width A SH48480X, SHC0X SH4848X0, SHCX0 X and X Configurations Determined from. D D H pening Size Height -/3 (6 mm) Diameter B C X -/3 (6 mm) Diameter F CUSTMR SID X -/3 (6 mm) Diameter (XX Model Shown) (5 mm) (5 mm) Fixed X Customer Side X Formula (5 mm) A W divided by plus 7/8 ( mm) B H minus -7/6 (6 mm) C B divided by minus 3/3 ( mm) D W divided by plus 3/4 (9 mm) H minus -3/4 (45 mm) F divided by NT: -/3 (6 mm) diameter holes (5 mm) from vertical edge are needed for door hardware. 4 (5 mm)

5 SHARYN MDL PASS-THRU WINDW XX MDL ASSMBLY (TW SLIDING PANLS). Install Roller Assemblies.5 (64 mm) Roller Assembly /8 Allen Wrench.9 (48 mm) Clamp Fit Clamp between Glass and Roller Assembly. Customer Side CUSTMR SID /8 Allen Wrench required (not included) Tighten Set Screws evenly. /8 Allen Wrench NT: To adjust hanger height up or down. (3 mm) (approximately /8 ) remove wheel and place in another hole. Wheel Phillips Screwdriver NT: s are not used Roller Assemblies. NT: Customer Side Door faces other direction when installed. 5

6 SHARYN MDL PASS-THRU WINDW XX MDL ASSMBLY (CNTINUD) (TW SLIDING PANLS). Install Door Hardware Clerk Side (Unlocked Position) Key (ptional LK50) Mounting Mounting (ed Position) Fit through hole in Door and attach to Mounting included screws. Mounting (ed Position) CUSTMR SID Customer Side ING Fit through hole in Customer Side Door and screw into. NT: Customer Side Door faces other direction when installed. 6

7 CUSTMR SID CUSTMR SID CUSTMR SID SHARYN MDL PASS-THRU WINDW XX MDL INSTALLATIN (TW SLIDING PANLS). Install verhead Track Use a Level and Shims to install verhead Track correctly in opening. NT: Use fasteners appropriate for the surrounding substrate. (These fasteners not included) Fasteners by Installer. Hang Doors Install the Customer Side Door first. NT: Check proper placement of and Customer Side Doors. CUSTMR SID Counter by provided by others 7

8 SHARYN MDL PASS-THRU WINDW XX MDL INSTALLATIN (CNTINUD) (TW SLIDING PANLS) 3. Install Guides CUSTMR SID uter Guide Inner Guide uter Guide -3/8 (35 mm) 5/8 (6 mm) 5/8 (6 mm) -3/8 (35 mm) Install Guides included #6 X 3/4 FHP Black Sheet Metal Screws. 4. Install Self-Adhesive Bumpers CUSTMR SID CUSTMR SID Use four Bumpers on each wall. Position from top of counter by others and from bottom of verhead Track. Center to each sliding panel. Clear Protective Self-Adhesive Bumpers Counter provided by others 8

9 SHARYN MDL PASS-THRU WINDW X R X MDL ASSMBLY (N SLIDING PANL AND N FIXD PANL). Install Roller Assemblies Fixed Lite Sliding Door Roller Assembly Fit Clamp between Tighten Set Screws evenly. glass and Roller Assembly. NT: See Page 5 for notes on adjusting Hanger height. NT: s are not used Roller Assemblies.. Install Door Hardware Clamp /8 Allen Wrench required (not included) Mounting /8 Allen Wrench (ed Position) FRNT SLIDING (Unlocked Position) Key (ptional LK50) Mounting RAR SLIDING Fit through hole in Sliding Door and attach to Mounting included screws. Mounting (ed Position) Fit through hole in Fixed Lite and screw into. NT: X Installation Shown 9

10 SHARYN MDL PASS-THRU WINDW X R X MDL INSTALLATIN (N SLIDING PANL AND N FIXD PANL). Attach Fixed Lite Header to verhead Track Secure included #6 X / FHP Zinc d Sheet Metal Screws.. Mount verhead Track Fasteners by Installer Use a Level and Shims to install verhead Track correctly in opening. NT: Use fasteners appropriate for the surrounding substrate (not included). 3. Mount Bottom Rail Directly Below Fixed Lite Header Rail Fasteners by Installer nsure the Fixed Lite Header and Bottom Track are correctly aligned. NT: Use fasteners appropriate for the surrounding substrate (not included). X Installation Shown 0

11 SHARYN MDL PASS-THRU WINDW X R X MDL INSTALLATIN (CNTINUD) (N SLIDING PANL AND N FIXD PANL) 4. Install Fixed Lite Use Lift and Drop Method to place glass on Setting Blocks. nozzle Cat. No. C Silicone Sealant NT: Trim nozzle at 45 angle for best results. Cat. No. C Silicone Sealant Cat. No. C Silicone Sealant PSB5 Setting Block (included) Cat. No. CRL6 Stick Tool Install glass and apply bead of C silicone on both sides. Smooth bead CRL6 Stick Tool. (C and CRL6 included) Place Setting Blocks at quarter points in Bottom Rail. Counter by thers Setting Blocks 5. Install Sliding Door Counter provided by others X Installation Shown

12 SHARYN MDL PASS-THRU WINDW X R X MDL INSTALLATIN (CNTINUD) (N SLIDING PANL AND N FIXD PANL) 6. Install Guides uter Guide uter Guide -3/8 (35 mm) 3/3 (0 mm) 7/3 (4 mm) -3/8 (35 mm) Install Guides included #6-3/4 FHP Black Sheet Metal Screws. 7. Install Self-Adhesive Bumpers Use two Bumpers on each wall. Position from top of counter by others and from bottom of verhead Track. Center to sliding door. Clear Protective Self-Adhesive Bumpers NT: X Installation Shown Counter provided by others

SHARYN MODEL FRAMELESS GLASS PASS-THRU WINDOW

SHARYN MODEL FRAMELESS GLASS PASS-THRU WINDOW INSTALLATIN INSTRUCTINS SHARYN MDL FRAMLSS GLASS PASS-THRU WINDW FR /4 (6 MM) TMPRD GLASS Counter provided by others 503. Vernon Avenue, Los Angeles, CA 90058-86 Phone: (800) 4-644 XT. 7760 Fax: (800)