UPDATED. X-Range. Specifiers Guide September 2015 (revised September 2016)

Transcription

1 UPDATED X-Range Specifiers Guide September 205 (revised September 206)

2 INDEX Important notes... 2 Bench desks Standard frames Square frames Rectangular frames A-Frames Screens for bench desks Height adjustment kits Infill panels... 2 Cable management accessories...2, 23, 29 Coffee tables... 3 Conference tables (and seating guidelines) CPU holders... 3 Freestanding desks and workstations Filing cabinets... 3 Finishes (illustrations) Fittings for stabilising and linking... 22, 35, 36 GP Desks Lockers Meeting tables (rectangular and circular) Monitor arms... 3 Pedestals (for bench, freestanding and GP desks) , 25 Reception desks Screens QSPA aluminium frame (for bench screens, with aluminium frames, see p.20-2) Screens: QSLS thermoplastic frame Seating Executive chairs Meeting and canteen chairs: beam seating Reception and breakout seating Seating dimensions Working chairs Upholstery price bands Storage units Terms and conditions of sale... 5 Worksurface shapes IMPORTANT NOTES Specifications X-Range is offered in Beech, Concrete, Macassar, Maple, Natural Oak, Natural Walnut, Wenge, White, Zebrano and Zebrano Sand MFC (melamine), edged with 2mm ABS lipping. We also offer the combination of tops in any finish with vertical panels in White. High Gloss White is offered on selected components. Please note that over a period of years the surface of melamine may wear and in time this may start to degrade its visual appearance. Such wear is more noticeable on darker finishes and is not a fault but a characteristic of all melamines. For this reason we do not recommend darker melamine finishes for applications where high levels of surface abrasion may be expected, and recommend the use of mouse mats with all finishes. Metalwork is available in Slate, Silva and White (RAL 906). Selected components are available in Raw Steel - Matt and Raw Steel - Gloss. Finish colours printed in our literature or viewed on our website cannot be relied on for colour accuracy: samples of all our finishes are available on request from our Customer Service Department. Pedestals are fitted with recessed drawer pulls. Storage units are fitted with handles, except vertical tambour doors which have integral finger pulls. Dimensions are listed in the order Width x Depth x Height. All dimensions are nominal. Maintenance X-Range furniture requires no maintenance, and cleaning should be carried out solely with a damp cloth and soft duster. Spray and wax polishes must not be used. Fabric upholstery should be vacuumed regularly with appropriate care. Leather upholstery should be cleaned with a soft damp cloth. Avoid placing leather upholstery in direct sunlight or close to heat sources such as radiators. Packaging and delivery access X-Range storage units and pedestals are supplied assembled. Desks and most other items are supplied flat packed for assembly on site. It is the purchaser s responsibility to ensure that building access is adequate before ordering: assembled items cannot be dismantled once manufactured. In the event of direct delivery by Sven Christiansen abortive delivery charges may become payable if delivery cannot be effected due to inadequate access, inappropriate specification or site conditions. If in any doubt about access please contact us to arrange a site survey. Guarantee X-Range furniture is guaranteed for a period of five years against any defect resulting from faulty materials or workmanship (three years in the case of moving parts seating excepted), fair wear and tear excluded and subject to appropriate use, care and maintenance. Prices, Terms and Conditions All prices are exclusive of VAT. All supplies are subject to our Terms and Conditions of Sale see p.5. Sven Christiansen plc reserves the right to amend or delete products without notice. PEDESTALS STEEL Mobile Narrow Mobile 2 small drawers filing drawer 390x520x600mm QMFP3/## 2 small drawers filing drawer 300x520x600mm QMNP3/## All drawers are fitted with 00% extension ball bearing runners and side drawer pulls. Drawers accept both A4 and foolscap suspension files. A pentray is included with each pedestal. Replace ## with metal colour: BK=Black (RAL9005) SV=Silver (RAL 9006 shade brighter than X-Range Silva) WH=White (RAL 906) 2 X-Range Specifiers Guide September 205 (updated )

3 PEDESTALS MFC (common to both bench desks and general desks) Fixed * Fixed * Mobile Low Mobile Narrow Mobile Pentray small drawer filing drawer 43x600mm QP2/** Desk height x 600mm deep 3 small drawers 43x600mm QP3/** Desk height x 800mm deep 2 small drawers filing drawer 43x600x645mm QFP3M/** small drawer filing drawer 43x600x490mm QLP2M/** 2 small drawers filing drawer 320x600x645mm QNP3M/** (any of the above pedestals may be used with X-Range bench desks) Fits top drawer of any pedestal, except narrow pedestals 356x238x28 QPEN 2 small drawers filing drawer 43x600x735mm QEP3/** FILING CABINETS 2 small drawers filing drawer 43x800x735mm QDDP3/** All pedestals are lockable. Fixed and Mobile units are for use under 800mm ends of desks. * Fixed pedestals cannot be attached to QD8 desks and QD8F, QL90RF or QL90QF reception desks, except to special order because fitting a pedestal leaves insufficient user kneeroom. Fixed pedestals cannot be attached to Bench Desks, Compact Corner Desks or Double-Wave Desks (because of the inwards curve of the tops: we recommend using narrow mobile pedestals under these desks). 500x525x735mm, 2 drawer, locking QFC2/** 500x525x065mm, 3 drawer, locking QFC3/** 500x525x395mm, 4 drawer, locking QFC4/** MONITOR ARMS (fit standard VESA mounting holes 75x75mm and 00x00mm) Through-desk adjustable-height double extension monitor arm (pole height adjustment). Fits through standard cable port, retaining cable access. Silver F QMATV2 White s QMATV2/WH Desk-clamp adjustable-height double extension monitor arm. Silver F QMACV2 White s QMACV2/WH Through-desk adjustable-height twin double extension monitor arm. Fits through standard cable port, retaining cable access. Silver F QMATV22 White s QMATV22/WH Desk-clamp adjustable-height twin double extension monitor arms (pole height adjustment). Silver F QMACV22 White s QMACV22/WH Desk clamp monitor arms cannot be fitted to single sided sliding top benches, or in the centre of the scallop on fixed top benches with scalloped tops. Slatwall and accessory bar mount adjustable-height single extension monitor arm. (see note * below) Silver F QMASV White s QMASV/WH CPU HOLDERS Universal CPU holder, adjustable for height. Fits under any desk surface except sliding top and 600mm deep single-sided bench desks (see note *2 below). Silver n QCPU2/SA White s QCPU2/WH s White RAL900 F Silver RAL9006 n Silver (no exact RAL reference) (White desk frames are RAL 906) Universal CPU cradle, slide/rotate, adjustable for height. Silver n QCPUSR White s QCPUWH X-Range bench desks additionally require conversion kit QF58 (will not fit 600mm deep single-sided or sliding top 600mm deep doublesided benches) * The size and weight of some monitors can sometimes pull even our very rigid dividing screens slightly away from vertical or cause a screen and others linked to it to move when a monitor is adjusted. If you feel this may be an issue, given the monitors being fitted and the expectations of the users, we recommend specifying our desk-mounted monitor arms. In any event, screen-mounted monitor arms should always be mounted in counterbalanced pairs, one on either side of a screen, or special optional bracing brackets fitted. *2 A special bracket is available to enable fitting to sliding top and 600mm deep single sided bench desks: QCPUSB White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White X-Range Specifiers Guide September 205 (updated ) 3

4 DOUBLE-SIDED BENCH DESKS STANDARD FRAMES FIXED TOPS Initial Add-on FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60/**/~~ QBD60E/**/~~ QBD60/C/**/~~ QBD60E/C/**/~~ Wire cable trays included 200mm QBD62/**/~~ QBD62E/**/~~ QBD62/C/**/~~ QBD62E/C/**/~~ as standard. 400mm QBD64/**/~~ QBD64E/**/~~ QBD64/C/**/~~ QBD64E/C/**/~~ are 600mm QBD66/**/~~ QBD66E/**/~~ QBD66/C/**/~~ QBD66E/C/**/~~ compatible only with steel 800mm QBD68/**/~~ QBD68E/**/~~ QBD68/C/**/~~ QBD68E/C/**/~~ pedestals or low mobile 2000mm QBD620/**/~~ QBD620E/**/~~ QBD620/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80/**/~~ QBD80E/**/~~ QBD80/C/**/~~ QBD80E/C/**/~~ Wire cable trays are 200mm QBD82/**/~~ QBD82E/**/~~ QBD82/C/**/~~ QBD82E/C/**/~~ included as standard. 400mm QBD84/**/~~ QBD84E/**/~~ QBD84/C/**/~~ QBD84E/C/**/~~ 600mm QBD86/**/~~ QBD86E/**/~~ QBD86/C/**/~~ QBD86E/C/**/~~ 800mm QBD88/**/~~ QBD88E/**/~~ QBD88/C/**/~~ QBD88E/C/**/~~ 2000mm QBD820/**/~~ QBD820E/**/~~ QBD820/C/**/~~ QBD820E/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS STANDARD FRAMES FIXED TOPS initial module stand-alone If an initial module has either an add-on module or two side extensions attached it does not require a Central Power Tower for stability (as it is not considered stand-alone ). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power Tower includes QBT Power Tower 000mm QBD60T/**/~~ QBD60T/C/**/~~ Wire cable trays included 200mm QBD62T/**/~~ QBD62T/C/**/~~ as standard. 400mm QBD64T/**/~~ QBD64T/C/**/~~ are 600mm QBD66T/**/~~ QBD66T/C/**/~~ compatible only with steel 800mm QBD68T/**/~~ QBD68T/C/**/~~ pedestals or low mobile MFC 2000mm QBD620T/**/~~ QBD620T/C/**/~~ pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power Tower includes QBT Power Tower 000mm QBD80T/**/~~ QBD80T/C/**/~~ Wire cable trays included 200mm QBD82T/**/~~ QBD82T/C/**/~~ as standard. 400mm QBD84T/**/~~ QBD84T/C/**/~~ 600mm QBD86T/**/~~ QBD86T/C/**/~~ 800mm QBD88T/**/~~ QBD88T/C/**/~~ 2000mm QBD820T/**/~~ QBD820T/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 4 X-Range Specifiers Guide September 205 (updated )

5 SINGLE-SIDED BENCH DESKS STANDARD FRAMES FIXED TOPS Initial Add-on Modesty panel FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm QBS60/**/~~ QBS60E/**/~~ QBS60/C/**/~~ QBS60E/C/**/~~ n/a Cable trays are not 200mm QBS62/**/~~ QBS62E/**/~~ QBS62/C/**/~~ QBS62E/C/**/~~ n/a fitted or compatible 400mm QBS64/**/~~ QBS64E/**/~~ QBS64/C/**/~~ QBS64E/C/**/~~ n/a with single-sided 600mm QBS66/**/~~ QBS66E/**/~~ QBS66/C/**/~~ QBS66E/C/**/~~ n/a 600mm deep fixed 800mm QBS68/**/~~ QBS68E/**/~~ QBS68/C/**/~~ QBS68E/C/**/~~ n/a tops. 2000mm QBS620/**/~~ QBS620E/**/~~ QBS620/C/**/~~ QBS620E/C/**/~~ n/a FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80/**/~~ QBS80E/**/~~ QBS80/C/**/~~ QBS80E/C/**/~~ QMP0/** * Modesty panels 200mm QBS82/**/~~ QBS82E/**/~~ QBS82/C/**/~~ QBS82E/C/**/~~ QMP2/** are not compatible 400mm QBS84/**/~~ QBS84E/**/~~ QBS84/C/**/~~ QBS84E/C/**/~~ QMP4/** with scalloped tops. 600mm QBS86/**/~~ QBS86E/**/~~ QBS86/C/**/~~ QBS86E/C/**/~~ QMP6/** Cable trays included 800mm QBS88/**/~~ QBS88E/**/~~ QBS88/C/**/~~ QBS88E/C/**/~~ QMP8/** as standard. 2000mm QBS820/**/~~ QBS820E/**/~~ QBS820/C/**/~~ QBS820E/C/**/~~ QMP20/** The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot replace the cable ports on single-sided bench desks with YCPS2, YPOP or other electrical fittings as they would foul against the underframe. DOUBLE-WAVE TOP OPTION STANDARD FRAMES PEDESTALS AND SCREENS Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code (before the first / ): per top (double-sided = two tops). For Pedestals see pages 2-3. For Bench Screens see page SIDE EXTENSION STANDARD FRAMES (fixed tops only) FIXED RETURN WITH PEDESTAL Unhanded side extensions. A mobile, low mobile or narrow mobile pedestal may be placed underneath, or a desk height 600mm deep pedestal placed on the end. Not suitable for use with tops less than 400mm wide. Includes one centrally positioned cable port. Size (mm) Code Price 800x600mm QBR/**/~~ (for fixed top bench desks except 600mm single-sided) 800x600mm QBR6S/**/~~ (for fixed top 600mm single-sided bench desks) 000x600mm QBR0/**/~~ (for fixed top bench desks except 600mm single-sided) 000x600mm QBR0S/**/~~ (for fixed top 600mm single-sided bench desks) Pedestal with 2 drawers + file drawer. Unhanded. Size (mm) Code Price 800x600mm QRP3/** 000x600mm QRP30/** ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ Desk height: Bench desks with fixed tops are 735mm high. A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 5

6 DOUBLE-SIDED BENCH DESKS STANDARD FRAMES SLIDING TOPS Initial Add-on SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60S/**/~~ QBD60SE/**/~~ QBD60S/C/**/~~ QBD60SE/C/**/~~ Wire cable trays included 200mm QBD62S/**/~~ QBD62SE/**/~~ QBD62S/C/**/~~ QBD62SE/C/**/~~ as standard. 400mm QBD64S/**/~~ QBD64SE/**/~~ QBD64S/C/**/~~ QBD64SE/C/**/~~ are 600mm QBD66S/**/~~ QBD66SE/**/~~ QBD66S/C/**/~~ QBD66SE/C/**/~~ compatible only with steel 800mm QBD68S/**/~~ QBD68SE/**/~~ QBD68S/C/**/~~ QBD68SE/C/**/~~ pedestals or low mobile 2000mm QBD620S/**/~~ QBD620SE/**/~~ QBD620S/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80S/**/~~ QBD80SE/**/~~ QBD80S/C/**/~~ QBD80SE/C/**/~~ Wire cable trays included 200mm QBD82S/**/~~ QBD82SE/**/~~ QBD82S/C/**/~~ QBD82SE/C/**/~~ as standard. 400mm QBD84S/**/~~ QBD84SE/**/~~ QBD84S/C/**/~~ QBD84SE/C/**/~~ 600mm QBD86S/**/~~ QBD86SE/**/~~ QBD86S/C/**/~~ QBD86SE/C/**/~~ 800mm QBD88S/**/~~ QBD88SE/**/~~ QBD88S/C/**/~~ QBD88SE/C/**/~~ 2000mm QBD820S/**/~~ QBD820SE/**/~~ QBD820S/C/**/~~ QBD820SE/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS STANDARD FRAMES SLIDING TOPS initial module stand-alone SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60ST/**/~~ QBD60ST/C/**/~~ Wire cable trays included 200mm QBD62ST/**/~~ QBD62ST/C/**/~~ as standard. 400mm QBD64ST/**/~~ QBD64ST/C/**/~~ are 600mm QBD66ST/**/~~ QBD66ST/C/**/~~ compatible only with steel 800mm QBD68ST/**/~~ QBD68ST/C/**/~~ pedestals or low mobile MFC 2000mm QBD620ST/**/~~ QBD620ST/C/**/~~ pedestals (QLP2M). SLIDING TOPS with Cable Ports SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80ST/**/~~ QBD80ST/C/**/~~ Wire cable trays included 200mm QBD82ST/**/~~ QBD82ST/C/**/~~ as standard. 400mm QBD84ST/**/~~ QBD84ST/C/**/~~ 600mm QBD86ST/**/~~ QBD86ST/C/**/~~ 800mm QBD88ST/**/~~ QBD88ST/C/**/~~ 2000mm QBD820ST/**/~~ QBD820ST/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 6 X-Range Specifiers Guide September 205 (updated )

7 SINGLE-SIDED BENCH DESKS STANDARD FRAMES SLIDING TOPS Initial Add-on Modesty panel SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm n/a n/a n/a n/a n/a 200mm n/a n/a n/a n/a n/a 400mm n/a n/a n/a n/a n/a 600mm n/a n/a n/a n/a n/a 800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80S/**/~~ QBS80SE/**/~~ QBS80S/C/**/~~ QBS80SE/C/**/~~ QMP0/** * Modesty panels 200mm QBS82S/**/~~ QBS82SE/**/~~ QBS82S/C/**/~~ QBS82SE/C/**/~~ QMP2/** are not compatible 400mm QBS84S/**/~~ QBS84SE/**/~~ QBS84S/C/**/~~ QBS84SE/C/**/~~ QMP4/** with scalloped 600mm QBS86S/**/~~ QBS86SE/**/~~ QBS86S/C/**/~~ QBS86SE/C/**/~~ QMP6/** tops. Wire cable 800mm QBS88S/**/~~ QBS88SE/**/~~ QBS88S/C/**/~~ QBS88SE/C/**/~~ QMP8/** trays included 2000mm QBS820S/**/~~ QBS820SE/**/~~ QBS820S/C/**/~~ QBS820SE/C/**/~~ QMP20/** as standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot fit a desk-clamp monitor arm to a single-sided bench with a sliding top the clamp fouls the bench underframe. If you wish to fit a desk mounted monitor arm please use a through-desk fitting, and if you do not wish to drill the top please order a special top fitted with cable ports. DOUBLE-WAVE TOP OPTION STANDARD FRAMES PEDESTALS AND SCREENS For Pedestals see pages 2-3. For Bench Screens see pages Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code, i.e. before the first /, and add per top (each double-sided module counts as two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ Notes Bench desks with sliding tops are 74mm high. Rear cable access indicates that the tops are cut very slightly short to allow cable access along the whole rear edge of the top. With scalloped rear edges the tops are full depth with cable access via the scallop along the central portion of the desk. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 7

8 DOUBLE-SIDED BENCH DESKS SQUARE FRAMES FIXED TOPS Initial Add-on FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60/Q/**/~~ QBD60E/**/~~ QBD60/Q/C/**/~~ QBD60E/C/**/~~ Wire cable trays included 200mm QBD62/Q/**/~~ QBD62E/**/~~ QBD62/Q/C/**/~~ QBD62E/C/**/~~ as standard. 400mm QBD64/Q/**/~~ QBD64E/**/~~ QBD64/Q/C/**/~~ QBD64E/C/**/~~ are 600mm QBD66/Q/**/~~ QBD66E/**/~~ QBD66/Q/C/**/~~ QBD66E/C/**/~~ compatible only with steel 800mm QBD68/Q/**/~~ QBD68E/**/~~ QBD68/Q/C/**/~~ QBD68E/C/**/~~ pedestals or low mobile 2000mm QBD620/Q/**/~~ QBD620E/**/~~ QBD620/Q/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80/Q/**/~~ QBD80E/**/~~ QBD80/Q/C/**/~~ QBD80E/C/**/~~ Wire cable trays are 200mm QBD82/Q/**/~~ QBD82E/**/~~ QBD82/Q/C/**/~~ QBD82E/C/**/~~ included as standard. 400mm QBD84/Q/**/~~ QBD84E/**/~~ QBD84/Q/C/**/~~ QBD84E/C/**/~~ 600mm QBD86/Q/**/~~ QBD86E/**/~~ QBD86/Q/C/**/~~ QBD86E/C/**/~~ 800mm QBD88/Q/**/~~ QBD88E/**/~~ QBD88/Q/C/**/~~ QBD88E/C/**/~~ 2000mm QBD820/Q/**/~~ QBD820E/**/~~ QBD820/Q/C/**/~~ QBD820E/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS SQUARE FRAMES FIXED TOPS initial module stand-alone If an initial module has either an add-on module or two side extensions attached it does not require a Central Power Tower for stability (as it is not considered stand-alone ). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60T/Q/**/~~ QBD60T/Q/C/**/~~ Wire cable trays included 200mm QBD62T/Q/**/~~ QBD62T/Q/C/**/~~ as standard. 400mm QBD64T/Q/**/~~ QBD64T/Q/C/**/~~ are 600mm QBD66T/Q/**/~~ QBD66T/Q/C/**/~~ compatible only with steel 800mm QBD68T/Q/**/~~ QBD68T/Q/C/**/~~ pedestals or low mobile 2000mm QBD620T/Q/**/~~ QBD620T/Q/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80T/Q/**/~~ QBD80T/Q/C/**/~~ Wire cable trays included 200mm QBD82T/Q/**/~~ QBD82T/Q/C/**/~~ as standard. 400mm QBD84T/Q/**/~~ QBD84T/Q/C/**/~~ 600mm QBD86T/Q/**/~~ QBD86T/Q/C/**/~~ 800mm QBD88T/Q/**/~~ QBD88T/Q/C/**/~~ 2000mm QBD820T/Q/**/~~ QBD820T/Q/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 8 X-Range Specifiers Guide September 205 (updated )

9 SINGLE-SIDED BENCH DESKS SQUARE FRAMES FIXED TOPS Initial Add-on Modesty panel FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm QBS60/Q/**/~~ QBS60E/**/~~ QBS60/Q/C/**/~~ QBS60E/C/**/~~ n/a Wire cable trays 200mm QBS62/Q/**/~~ QBS62E/**/~~ QBS62/Q/C/**/~~ QBS62E/C/**/~~ n/a are not fitted 400mm QBS64/Q/**/~~ QBS64E/**/~~ QBS64/Q/C/**/~~ QBS64E/C/**/~~ n/a or compatible 600mm QBS66/Q/**/~~ QBS66E/**/~~ QBS66/Q/C/**/~~ QBS66E/C/**/~~ n/a with single-sided 800mm QBS68/Q/**/~~ QBS68E/**/~~ QBS68/Q/C/**/~~ QBS68E/C/**/~~ n/a 600mm deep fixed 2000mm QBS620/Q/**/~~ QBS620E/**/~~ QBS620/Q/C/**/~~ QBS620E/C/**/~~ n/a tops. FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80/Q/**/~~ QBS80E/**/~~ QBS80/Q/C/**/~~ QBS80E/C/**/~~ QMP0/** * Modesty panels 200mm QBS82/Q/**/~~ QBS82E/**/~~ QBS82/Q/C/**/~~ QBS82E/C/**/~~ QMP2/** are not compatible 400mm QBS84/Q/**/~~ QBS84E/**/~~ QBS84/Q/C/**/~~ QBS84E/C/**/~~ QMP4/** with scalloped tops. 600mm QBS86/Q/**/~~ QBS86E/**/~~ QBS86/Q/C/**/~~ QBS86E/C/**/~~ QMP6/** Wire cable trays 800mm QBS88/Q/**/~~ QBS88E/**/~~ QBS88/Q/C/**/~~ QBS88E/C/**/~~ QMP8/** are included as 2000mm QBS820/Q/**/~~ QBS820E/**/~~ QBS820/Q/C/**/~~ QBS820E/C/**/~~ QMP20/** standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot replace the cable ports on single-sided bench desks with YCPS2, YPOP or other electrical fittings as they would foul against the underframe. DOUBLE-WAVE TOP OPTION SQUARE FRAMES PEDESTALS AND SCREENS SIDE EXTENSION SQUARE FRAMES (with fixed tops only) Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code, (before the first / ), and add per top (each double-sided module counts as two tops). Unhanded side extensions. A mobile, low mobile or narrow mobile pedestal may be placed underneath, or a desk height 600mm deep pedestal placed on the end. Not suitable for use with tops less than 400mm wide. Includes one centrally positioned cable port. For Pedestals see pages 2-3. For Bench Screens see pages FIXED RETURN WITH PEDESTAL Size (mm) Code Price 800x600mm QBR/Q/**/~~ (for fixed top bench desks except 600mm single-sided) 800x600mm QBR6S/Q/**/~~ (for fixed top 600mm single-sided bench desks) 000x600mm QBR0/Q/**/~~ (for fixed top bench desks except 600mm single-sided) 000x600mm QBR0S/Q/**/~~ (for fixed top 600mm single-sided bench desks) Pedestal with 2 drawers + file drawer. Unhanded. Size (mm) Code Price 800x600mm QRP3/** 000x600mm QRP30/** ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ Desk height: Bench desks with fixed tops are 735mm high. A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 9

10 DOUBLE-SIDED BENCH DESKS SQUARE FRAMES SLIDING TOPS Initial Add-on SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60S/Q/**/~~ QBD60SE/**/~~ QBD60S/Q/C/**/~~ QBD60SE/C/**/~~ Wire cable trays included 200mm QBD62S/Q/**/~~ QBD62SE/**/~~ QBD62S/Q/C/**/~~ QBD62SE/C/**/~~ as standard. 400mm QBD64S/Q/**/~~ QBD64SE/**/~~ QBD64S/Q/C/**/~~ QBD64SE/C/**/~~ are 600mm QBD66S/Q/**/~~ QBD66SE/**/~~ QBD66S/Q/C/**/~~ QBD66SE/C/**/~~ compatible only with steel 800mm QBD68S/Q/**/~~ QBD68SE/**/~~ QBD68S/Q/C/**/~~ QBD68SE/C/**/~~ pedestals or low mobile 2000mm QBD620S/Q/**/~~ QBD620SE/**/~~ QBD620S/Q/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80S/Q/**/~~ QBD80SE/**/~~ QBD80S/Q/C/**/~~ QBD80SE/C/**/~~ Wire cable trays included 200mm QBD82S/Q/**/~~ QBD82SE/**/~~ QBD82S/Q/C/**/~~ QBD82SE/C/**/~~ as standard. 400mm QBD84S/Q/**/~~ QBD84SE/**/~~ QBD84S/Q/C/**/~~ QBD84SE/C/**/~~ 600mm QBD86S/Q/**/~~ QBD86SE/**/~~ QBD86S/Q/C/**/~~ QBD86SE/C/**/~~ 800mm QBD88S/Q/**/~~ QBD88SE/**/~~ QBD88S/Q/C/**/~~ QBD88SE/C/**/~~ 2000mm QBD820S/Q/**/~~ QBD820SE/**/~~ QBD820S/Q/C/**/~~ QBD820SE/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS SQUARE FRAMES SLIDING TOPS initial module stand-alone SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60ST/Q/**/~~ QBD60ST/Q/C/**/~~ Wire cable trays included 200mm QBD62ST/Q/**/~~ QBD62ST/Q/C/**/~~ as standard. 400mm QBD64ST/Q/**/~~ QBD64ST/Q/C/**/~~ are 600mm QBD66ST/Q/**/~~ QBD66ST/Q/C/**/~~ compatible only with steel 800mm QBD68ST/Q/**/~~ QBD68ST/Q/C/**/~~ pedestals or low mobile MFC 2000mm QBD620ST/Q/**/~~ QBD620ST/Q/C/**/~~ pedestals (QLP2M). SLIDING TOPS with Cable Ports SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80ST/Q/**/~~ QBD80ST/Q/C/**/~~ Wire cable trays included 200mm QBD82ST/Q/**/~~ QBD82ST/Q/C/**/~~ as standard. 400mm QBD84ST/Q/**/~~ QBD84ST/Q/C/**/~~ 600mm QBD86ST/Q/**/~~ QBD86ST/Q/C/**/~~ 800mm QBD88ST/Q/**/~~ QBD88ST/Q/C/**/~~ 2000mm QBD820ST/Q/**/~~ QBD820ST/Q/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 0 X-Range Specifiers Guide September 205 (updated )

11 SINGLE-SIDED BENCH DESKS SQUARE FRAMES SLIDING TOPS Initial Add-on Modesty panel SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm n/a n/a n/a n/a n/a 200mm n/a n/a n/a n/a n/a 400mm n/a n/a n/a n/a n/a 600mm n/a n/a n/a n/a n/a 800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80S/Q/**/~~ QBS80SE/**/~~ QBS80S/Q/C/**/~~ QBS80SE/C/**/~~ QMP0/** * Modesty 200mm QBS82S/Q/**/~~ QBS82SE/**/~~ QBS82S/Q/C/**/~~ QBS82SE/C/**/~~ QMP2/** panels are not 400mm QBS84S/Q/**/~~ QBS84SE/**/~~ QBS84S/Q/C/**/~~ QBS84SE/C/**/~~ QMP4/** compatible with 600mm QBS86S/Q/**/~~ QBS86SE/**/~~ QBS86S/Q/C/**/~~ QBS86SE/C/**/~~ QMP6/** scalloped tops. 800mm QBS88S/Q/**/~~ QBS88SE/**/~~ QBS88S/Q/C/**/~~ QBS88SE/C/**/~~ QMP8/** Wire cable trays 2000mm QBS820S/Q/**/~~ QBS820SE/**/~~ QBS820S/Q/C/**/~~ QBS820SE/C/**/~~ QMP20/** are included as standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot fit a desk-clamp monitor arm to a single-sided bench with a sliding top the clamp fouls the bench underframe. If you wish to fit a desk mounted monitor arm please use a through-desk fitting, and if you do not wish to drill the top please order a special top fitted with cable ports. DOUBLE-WAVE TOP OPTION SQUARE FRAMES PEDESTALS AND SCREENS For Pedestals see pages 2-3. For Bench Screens see pages Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code, i.e. before the first /, and add per top (each double-sided module counts as two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ Notes Bench desks with sliding tops are 74mm high. Rear cable access indicates that the tops are cut very slightly short to allow cable access along the whole rear edge of the top. With scalloped rear edges the tops are full depth with cable access via the scallop along the central portion of the desk. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated )

12 DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES FIXED TOPS Initial Add-on FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60/R/**/~~ QBD60E/**/~~ QBD60/R/C/**/~~ QBD60E/C/**/~~ Wire cable trays included 200mm QBD62/R/**/~~ QBD62E/**/~~ QBD62/R/C/**/~~ QBD62E/C/**/~~ as standard. 400mm QBD64/R/**/~~ QBD64E/**/~~ QBD64/R/C/**/~~ QBD64E/C/**/~~ are 600mm QBD66/R/**/~~ QBD66E/**/~~ QBD66/R/C/**/~~ QBD66E/C/**/~~ compatible only with steel 800mm QBD68/R/**/~~ QBD68E/**/~~ QBD68/R/C/**/~~ QBD68E/C/**/~~ pedestals or low mobile 2000mm QBD620/R/**/~~ QBD620E/**/~~ QBD620/R/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80/R/**/~~ QBD80E/**/~~ QBD80/R/C/**/~~ QBD80E/C/**/~~ Wire cable trays included 200mm QBD82/R/**/~~ QBD82E/**/~~ QBD82/R/C/**/~~ QBD82E/C/**/~~ as standard. 400mm QBD84/R/**/~~ QBD84E/**/~~ QBD84/R/C/**/~~ QBD84E/C/**/~~ 600mm QBD86/R/**/~~ QBD86E/**/~~ QBD86/R/C/**/~~ QBD86E/C/**/~~ 800mm QBD88/R/**/~~ QBD88E/**/~~ QBD88/R/C/**/~~ QBD88E/C/**/~~ 2000mm QBD820/R/**/~~ QBD820E/**/~~ QBD820/R/C/**/~~ QBD820E/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES FIXED TOPS initial module stand-alone If an initial module has either an add-on module or two side extensions attached it does not require a Central Power Tower for stability (as it is not considered stand-alone ). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60T/R/**/~~ QBD60T/R/C/**/~~ Wire cable trays included 200mm QBD62T/R/**/~~ QBD62T/R/C/**/~~ as standard. 400mm QBD64T/R/**/~~ QBD64T/R/C/**/~~ are 600mm QBD66T/R/**/~~ QBD66T/R/C/**/~~ compatible only with steel 800mm QBD68T/R/**/~~ QBD68T/R/C/**/~~ pedestals or low mobile MFC 2000mm QBD620T/R/**/~~ QBD620T/R/C/**/~~ pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80T/R/**/~~ QBD80T/R/C/**/~~ Wire cable trays included 200mm QBD82T/R/**/~~ QBD82T/R/C/**/~~ as standard. 400mm QBD84T/R/**/~~ QBD84T/R/C/**/~~ 600mm QBD86T/R/**/~~ QBD86T/R/C/**/~~ 800mm QBD88T/R/**/~~ QBD88T/R/C/**/~~ 2000mm QBD820T/R/**/~~ QBD820T/R/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 2 X-Range Specifiers Guide September 205 (updated )

13 SINGLE-SIDED BENCH DESKS RECTANGULAR FRAMES FIXED TOPS Initial Add-on Modesty panel FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm QBS60/R/**/~~ QBS60E/**/~~ QBS60/R/C/**/~~ QBS60E/C/**/~~ n/a Wire cable trays 200mm QBS62/R/**/~~ QBS62E/**/~~ QBS62/R/C/**/~~ QBS62E/C/**/~~ n/a are not fitted 400mm QBS64/R/**/~~ QBS64E/**/~~ QBS64/R/C/**/~~ QBS64E/C/**/~~ n/a or compatible 600mm QBS66/R/**/~~ QBS66E/**/~~ QBS66/R/C/**/~~ QBS66E/C/**/~~ n/a with single-sided 800mm QBS68/R/**/~~ QBS68E/**/~~ QBS68/R/C/**/~~ QBS68E/C/**/~~ n/a 600mm deep fixed 2000mm QBS620/R/**/~~ QBS620E/**/~~ QBS620/R/C/**/~~ QBS620E/C/**/~~ n/a tops. FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80/R/**/~~ QBS80E/**/~~ QBS80/R/C/**/~~ QBS80E/C/**/~~ QMP0/** * Modesty panels 200mm QBS82/R/**/~~ QBS82E/**/~~ QBS82/R/C/**/~~ QBS82E/C/**/~~ QMP2/** are not compatible 400mm QBS84/R/**/~~ QBS84E/**/~~ QBS84/R/C/**/~~ QBS84E/C/**/~~ QMP4/** with scalloped tops. 600mm QBS86/R/**/~~ QBS86E/**/~~ QBS86/R/C/**/~~ QBS86E/C/**/~~ QMP6/** Wire cable trays 800mm QBS88/R/**/~~ QBS88E/**/~~ QBS88/R/C/**/~~ QBS88E/C/**/~~ QMP8/** are included as 2000mm QBS820/R/**/~~ QBS820E/**/~~ QBS820/R/C/**/~~ QBS820E/C/**/~~ QMP20/** standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot replace the cable ports on single-sided bench desks with YCPS2, YPOP or other electrical fittings as they would foul against the underframe. DOUBLE-WAVE TOP OPTION RECTANGULAR FRAMES PEDESTALS AND SCREENS Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code (before the first / ), and add per top (each double-sided module counts as two tops). SIDE EXTENSION RECTANGULAR FRAMES (with fixed tops only) Unhanded side extensions. A mobile, low mobile or narrow mobile pedestal may be placed underneath, or a desk height 600mm deep pedestal placed on the end. Not suitable for use with tops less than 400mm wide. Includes one centrally positioned cable port. Size (mm) Code Price 800x600mm QBR/R/**/~~ (for fixed top bench desks except 600mm single-sided) 800x600mm QBR6S/R/**/~~ (for fixed top 600mm single-sided bench desks) 000x600mm QBR0/R/**/~~ (for fixed top bench desks except 600mm single-sided) 000x600mm QBR0S/R/**/~~ (for fixed top 600mm single-sided bench desks) Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ Desk height: Bench desks with fixed tops are 735mm high. For Pedestals see pages 2-3. For Bench Screens see pages FIXED RETURN WITH PEDESTAL ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. Pedestal with 2 drawers + file drawer. Unhanded. Size (mm) Code Price 800x600mm QRP3/** 000x600mm QRP30/** As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 3

14 DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES SLIDING TOPS Initial Add-on SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60S/R/**/~~ QBD60SE/**/~~ QBD60S/R/C/**/~~ QBD60SE/C/**/~~ Wire cable trays included 200mm QBD62S/R/**/~~ QBD62SE/**/~~ QBD62S/R/C/**/~~ QBD62SE/C/**/~~ as standard. 400mm QBD64S/R/**/~~ QBD64SE/**/~~ QBD64S/R/C/**/~~ QBD64SE/C/**/~~ are 600mm QBD66S/R/**/~~ QBD66SE/**/~~ QBD66S/R/C/**/~~ QBD66SE/C/**/~~ compatible only with steel 800mm QBD68S/R/**/~~ QBD68SE/**/~~ QBD68S/R/C/**/~~ QBD68SE/C/**/~~ pedestals or low mobile 2000mm QBD620S/R/**/~~ QBD620SE/**/~~ QBD620S/R/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80S/R/**/~~ QBD80SE/**/~~ QBD80S/R/C/**/~~ QBD80SE/C/**/~~ Wire cable trays included 200mm QBD82S/R/**/~~ QBD82SE/**/~~ QBD82S/R/C/**/~~ QBD82SE/C/**/~~ as standard. 400mm QBD84S/R/**/~~ QBD84SE/**/~~ QBD84S/R/C/**/~~ QBD84SE/C/**/~~ 600mm QBD86S/R/**/~~ QBD86SE/**/~~ QBD86S/R/C/**/~~ QBD86SE/C/**/~~ 800mm QBD88S/R/**/~~ QBD88SE/**/~~ QBD88S/R/C/**/~~ QBD88SE/C/**/~~ 2000mm QBD820S/R/**/~~ QBD820SE/**/~~ QBD820S/R/C/**/~~ QBD820SE/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES SLIDING TOPS initial module stand-alone SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60ST/R/**/~~ QBD60ST/R/C/**/~~ Wire cable trays included 200mm QBD62ST/R/**/~~ QBD62ST/R/C/**/~~ as standard. 400mm QBD64ST/R/**/~~ QBD64ST/R/C/**/~~ are 600mm QBD66ST/R/**/~~ QBD66ST/R/C/**/~~ compatible only with steel 800mm QBD68ST/R/**/~~ QBD68ST/R/C/**/~~ pedestals or low mobile MFC 2000mm QBD620ST/R/**/~~ QBD620ST/R/C/**/~~ pedestals (QLP2M). SLIDING TOPS with Cable Ports SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80ST/R/**/~~ QBD80ST/R/C/**/~~ Wire cable trays included 200mm QBD82ST/R/**/~~ QBD82ST/R/C/**/~~ as standard. 400mm QBD84ST/R/**/~~ QBD84ST/R/C/**/~~ 600mm QBD86ST/R/**/~~ QBD86ST/R/C/**/~~ 800mm QBD88ST/R/**/~~ QBD88ST/R/C/**/~~ 2000mm QBD820ST/R/**/~~ QBD820ST/R/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 4 X-Range Specifiers Guide September 205 (updated )

15 SINGLE-SIDED BENCH DESKS RECTANGULAR FRAMES SLIDING TOPS Initial Add-on Modesty panel SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm n/a n/a n/a n/a n/a 200mm n/a n/a n/a n/a n/a 400mm n/a n/a n/a n/a n/a 600mm n/a n/a n/a n/a n/a 800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80S/R/**/~~ QBS80SE/**/~~ QBS80S/R/C/**/~~ QBS80SE/C/**/~~ QMP0/** * Modesty 200mm QBS82S/R/**/~~ QBS82SE/**/~~ QBS82S/R/C/**/~~ QBS82SE/C/**/~~ QMP2/** panels are not 400mm QBS84S/R/**/~~ QBS84SE/**/~~ QBS84S/R/C/**/~~ QBS84SE/C/**/~~ QMP4/** compatible with 600mm QBS86S/R/**/~~ QBS86SE/**/~~ QBS86S/R/C/**/~~ QBS86SE/C/**/~~ QMP6/** scalloped tops. 800mm QBS88S/R/**/~~ QBS88SE/**/~~ QBS88S/R/C/**/~~ QBS88SE/C/**/~~ QMP8/** Wire cable trays 2000mm QBS820S/R/**/~~ QBS820SE/**/~~ QBS820S/R/C/**/~~ QBS820SE/C/**/~~ QMP20/** are included as standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot fit a desk-clamp monitor arm to a single-sided bench with a sliding top the clamp fouls the bench underframe. If you wish to fit a desk mounted monitor arm please use a through-desk fitting, and if you do not wish to drill the top please order a special top fitted with cable ports. DOUBLE-WAVE TOP OPTION RECTANGULAR FRAMES PEDESTALS AND SCREENS For Pedestals see pages 2-3. For Bench Screens see pages Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code, i.e. before the first /, and add per top (each double-sided module counts as two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ Notes Bench desks with sliding tops are 74mm high. Rear cable access indicates that the tops are cut very slightly short to allow cable access along the whole rear edge of the top. With scalloped rear edges the tops are full depth with cable access via the scallop along the central portion of the desk. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 5

16 DOUBLE-SIDED BENCH DESKS A-FRAMES FIXED TOPS Initial Add-on FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60/A/**/~~ QBD60E/**/~~ QBD60/A/C/**/~~ QBD60E/C/**/~~ Wire cable trays included 200mm QBD62/A/**/~~ QBD62E/**/~~ QBD62/A/C/**/~~ QBD62E/C/**/~~ as standard. 400mm QBD64/A/**/~~ QBD64E/**/~~ QBD64/A/C/**/~~ QBD64E/C/**/~~ are 600mm QBD66/A/**/~~ QBD66E/**/~~ QBD66/A/C/**/~~ QBD66E/C/**/~~ compatible only with steel 800mm QBD68/A/**/~~ QBD68E/**/~~ QBD68/A/C/**/~~ QBD68E/C/**/~~ pedestals or low mobile 2000mm QBD620/A/**/~~ QBD620E/**/~~ QBD620/A/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80/A/**/~~ QBD80E/**/~~ QBD80/A/C/**/~~ QBD80E/C/**/~~ Wire cable trays included 200mm QBD82/A/**/~~ QBD82E/**/~~ QBD82/A/C/**/~~ QBD82E/C/**/~~ as standard. 400mm QBD84/A/**/~~ QBD84E/**/~~ QBD84/A/C/**/~~ QBD84E/C/**/~~ 600mm QBD86/A/**/~~ QBD86E/**/~~ QBD86/A/C/**/~~ QBD86E/C/**/~~ 800mm QBD88/A/**/~~ QBD88E/**/~~ QBD88/A/C/**/~~ QBD88E/C/**/~~ 2000mm QBD820/A/**/~~ QBD820E/**/~~ QBD820/A/C/**/~~ QBD820E/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS A-FRAMES FIXED TOPS initial module stand-alone If an initial module has either an add-on module or two side extensions attached it does not require a Central Power Tower for stability (as it is not considered stand-alone ). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60T/A/**/~~ QBD60T/A/C/**/~~ Wire cable trays included 200mm QBD62T/A/**/~~ QBD62T/A/C/**/~~ as standard. 400mm QBD64T/A/**/~~ QBD64T/A/C/**/~~ are 600mm QBD66T/A/**/~~ QBD66T/A/C/**/~~ compatible only with steel 800mm QBD68T/A/**/~~ QBD68T/A/C/**/~~ pedestals or low mobile 2000mm QBD620T/A/**/~~ QBD620T/A/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80T/A/**/~~ QBD80T/A/C/**/~~ Wire cable trays included 200mm QBD82T/A/**/~~ QBD82T/A/C/**/~~ as standard. 400mm QBD84T/A/**/~~ QBD84T/A/C/**/~~ 600mm QBD86T/A/**/~~ QBD86T/A/C/**/~~ 800mm QBD88T/A/**/~~ QBD88T/A/C/**/~~ 2000mm QBD820T/A/**/~~ QBD820T/A/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 6 X-Range Specifiers Guide September 205 (updated )

17 SINGLE-SIDED BENCH DESKS A-FRAMES FIXED TOPS Initial Add-on Modesty panel FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm QBS60/A/**/~~ QBS60E/**/~~ QBS60/A/C/**/~~ QBS60E/C/**/~~ n/a Wire cable trays 200mm QBS62/A/**/~~ QBS62E/**/~~ QBS62/A/C/**/~~ QBS62E/C/**/~~ n/a are not fitted 400mm QBS64/A/**/~~ QBS64E/**/~~ QBS64/A/C/**/~~ QBS64E/C/**/~~ n/a or compatible 600mm QBS66/A/**/~~ QBS66E/**/~~ QBS66/A/C/**/~~ QBS66E/C/**/~~ n/a with single-sided 800mm QBS68/A/**/~~ QBS68E/**/~~ QBS68/A/C/**/~~ QBS68E/C/**/~~ n/a 600mm deep fixed 2000mm QBS620/A/**/~~ QBS620E/**/~~ QBS620/A/C/**/~~ QBS620E/C/**/~~ n/a tops. FIXED TOPS with Cable Ports FIXED TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80/A/**/~~ QBS80E/**/~~ QBS80/A/C/**/~~ QBS80E/C/**/~~ QMP0/** * Modesty panels 200mm QBS82/A/**/~~ QBS82E/**/~~ QBS82/A/C/**/~~ QBS82E/C/**/~~ QMP2/** are not compatible 400mm QBS84/A/**/~~ QBS84E/**/~~ QBS84/A/C/**/~~ QBS84E/C/**/~~ QMP4/** with scalloped tops. 600mm QBS86/A/**/~~ QBS86E/**/~~ QBS86/A/C/**/~~ QBS86E/C/**/~~ QMP6/** Wire cable trays 800mm QBS88/A/**/~~ QBS88E/**/~~ QBS88/A/C/**/~~ QBS88E/C/**/~~ QMP8/** are included as 2000mm QBS820/A/**/~~ QBS820E/**/~~ QBS820/A/C/**/~~ QBS820E/C/**/~~ QMP20/** standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note you cannot replace the cable ports on single-sided bench desks with YCPS2, YPOP or other electrical fittings as they would foul against the underframe. DOUBLE-WAVE TOP OPTION A-FRAMES PEDESTALS AND SCREENS Rectangular tops on 800mm deep For Pedestals see pages 2-3. (only) bench desks of 400mm width For Bench Screens see pages and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code, i.e. before the first /, and add per top (each double-sided module counts as two tops). SIDE EXTENSION RECTANGULAR FRAMES (section matches A-Frame) FIXED RETURN WITH PEDESTAL Unhanded side extensions. A mobile, low mobile or narrow mobile pedestal may be placed underneath, or a desk height 600mm deep pedestal placed on the end. Not suitable for use with tops less than 400mm wide. Includes one centrally positioned cable port. Fixed tops only. Size (mm) Code Price 800x600mm QBR/R/**/~~ (for fixed top bench desks except 600mm single-sided) 800x600mm QBR6S/R/**/~~ (for fixed top 600mm single-sided bench desks) 000x600mm QBR0/R/**/~~ (for fixed top bench desks except 600mm single-sided) 000x600mm QBR0S/R/**/~~ (for fixed top 600mm single-sided bench desks) ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ Desk height: Bench desks with fixed tops are 735mm high. A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. Pedestal with 2 drawers + file drawer. Unhanded. Size (mm) Code Price 800x600mm QRP3/** 000x600mm QRP30/** As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 7

18 DOUBLE-SIDED BENCH DESKS A-FRAMES SLIDING TOPS Initial Add-on SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD60S/A/**/~~ QBD60SE/**/~~ QBD60S/A/C/**/~~ QBD60SE/C/**/~~ Wire cable trays included 200mm QBD62S/A/**/~~ QBD62SE/**/~~ QBD62S/A/C/**/~~ QBD62SE/C/**/~~ as standard. 400mm QBD64S/A/**/~~ QBD64SE/**/~~ QBD64S/A/C/**/~~ QBD64SE/C/**/~~ are 600mm QBD66S/A/**/~~ QBD66SE/**/~~ QBD66S/A/C/**/~~ QBD66SE/C/**/~~ compatible only with steel 800mm QBD68S/A/**/~~ QBD68SE/**/~~ QBD68S/A/C/**/~~ QBD68SE/C/**/~~ pedestals or low mobile 2000mm QBD620S/A/**/~~ QBD620SE/**/~~ QBD620S/A/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Width Initial module u Add-on module Initial module Add-on module 000mm QBD80S/A/**/~~ QBD80SE/**/~~ QBD80S/A/C/**/~~ QBD80SE/C/**/~~ Wire cable trays included 200mm QBD82S/A/**/~~ QBD82SE/**/~~ QBD82S/A/C/**/~~ QBD82SE/C/**/~~ as standard. 400mm QBD84S/A/**/~~ QBD84SE/**/~~ QBD84S/A/C/**/~~ QBD84SE/C/**/~~ 600mm QBD86S/A/**/~~ QBD86SE/**/~~ QBD86S/A/C/**/~~ QBD86SE/C/**/~~ 800mm QBD88S/A/**/~~ QBD88SE/**/~~ QBD88S/A/C/**/~~ QBD88SE/C/**/~~ 2000mm QBD820S/A/**/~~ QBD820SE/**/~~ QBD820S/A/C/**/~~ QBD820SE/C/**/~~ uif using a double-sided initial bench desk as a stand-alone, without an add-on module or two side extensions, also order a Central Power Tower to ensure stability (the cable tray will have a cut-out to accommodate the power tower). Please see listing below. If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. DOUBLE-SIDED BENCH DESKS A-FRAMES SLIDING TOPS initial module stand-alone SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD60ST/A/**/~~ QBD60ST/A/C/**/~~ Wire cable trays included 200mm QBD62ST/A/**/~~ QBD62ST/A/C/**/~~ as standard. 400mm QBD64ST/A/**/~~ QBD64ST/A/C/**/~~ are 600mm QBD66ST/A/**/~~ QBD66ST/A/C/**/~~ compatible only with steel 800mm QBD68ST/A/**/~~ QBD68ST/A/C/**/~~ pedestals or low mobile MFC 2000mm QBD620ST/A/**/~~ QBD620ST/A/C/**/~~ pedestals (QLP2M). SLIDING TOPS with Cable Ports SLIDING TOPS with Scalloped Rear Edges Initial module used stand-alone Initial module used stand-alone Width includes QBT Power tower includes QBT Power tower 000mm QBD80ST/A/**/~~ QBD80ST/A/C/**/~~ Wire cable trays included as 200mm QBD82ST/A/**/~~ QBD82ST/A/C/**/~~ standard. 400mm QBD84ST/A/**/~~ QBD84ST/A/C/**/~~ 600mm QBD86ST/A/**/~~ QBD86ST/A/C/**/~~ 800mm QBD88ST/A/**/~~ QBD88ST/A/C/**/~~ 2000mm QBD820ST/A/**/~~ QBD820ST/A/C/**/~~ If you are not ordering screens with double-sided bench desks, insert /N at the end of the core code, before the /**. This indicates that fixed tops should be manufactured slightly deeper and sliding tops supplied with a metal infill, to cover the gap usually occupied by screens. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 8 X-Range Specifiers Guide September 205 (updated )

19 SINGLE-SIDED BENCH DESKS A-FRAMES SLIDING TOPS Initial Add-on Modesty panel SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels 000mm n/a n/a n/a n/a n/a 200mm n/a n/a n/a n/a n/a 400mm n/a n/a n/a n/a n/a 600mm n/a n/a n/a n/a n/a 800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS with Rear Cable Access SLIDING TOPS with Scalloped Rear Edges Modesty Width Initial module Add-on module Initial module Add-on module panels * 000mm QBS80S/A/**/~~ QBS80SE/**/~~ QBS80S/A/C/**/~~ QBS80SE/C/**/~~ QMP0/** * Modesty 200mm QBS82S/A/**/~~ QBS82SE/**/~~ QBS82S/A/C/**/~~ QBS82SE/C/**/~~ QMP2/** panels are not 400mm QBS84S/A/**/~~ QBS84SE/**/~~ QBS84S/A/C/**/~~ QBS84SE/C/**/~~ QMP4/** compatible with 600mm QBS86S/A/**/~~ QBS86SE/**/~~ QBS86S/A/C/**/~~ QBS86SE/C/**/~~ QMP6/** scalloped tops. 800mm QBS88S/A/**/~~ QBS88SE/**/~~ QBS88S/A/C/**/~~ QBS88SE/C/**/~~ QMP8/** Wire cable trays 2000mm QBS820S/A/**/~~ QBS820SE/**/~~ QBS820S/A/C/**/~~ QBS820SE/C/**/~~ QMP20/** are included as standard. The optional modesty panels are 200mm shorter that the modules they fit (they are inset 00mm from each end). Note: You cannot fit a desk-clamp monitor arm to a single-sided bench with a sliding top the clamp fouls the bench underframe. If you wish to fit a desk mounted monitor arm please use a through-desk fitting, and if you do not wish to drill the top please order a special top fitted with cable ports. DOUBLE-WAVE TOP OPTION A-FRAMES PEDESTALS AND SCREENS For Pedestals see pages 2-3. For Bench Screens see pages Rectangular tops on 800mm deep (only) bench desks of 400mm width and larger may be replaced by tops with a double-wave shape. To specify, add /W to the end of the core code, i.e. before the first /, and add per top (each double-sided module counts as two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power towers are included with every add-on bench module. Additional power towers may be added at either end of a bench, to cater for situations where benches abut a wall and cables are routed up from skirting level. QBT/~~ A central power tower is needed for any stand-alone double-sided initial bench desk and is included in the price. The tower is a QBT (see left) but is fitted rotated 90 to maximize leg room, so that it runs in line with the desk rather than across it. As standard, power towers have a removable panel on one side. They may be specified with removable panels on both sides by adding /2D to the end of the code: per tower. May also be ordered as an additional power tower: QBTD/~~ Notes Bench desks with sliding tops are 74mm high. Rear cable access indicates that the tops are cut very slightly short to allow cable access along the whole rear edge of the top. With scalloped rear edges the tops are full depth with cable access via the scallop along the central portion of the desk. White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 9

20 HEIGHT ADJUSTMENT KITS FOR BENCH DESKS (fixed tops only) Individual tops may be raised by the use of a spacer kit in a choice of heights (fitted on installation or retrofitted). In addition, for cosmetic reasons you need plastic caps to cover the open tops of any legs that are exposed by raising the top. The diagram to right illustrates the number of caps that are needed depending on the location of the top being raised. Please note that the underframe is not raised. If you wish to raise two adjacent tops please contact us for advice. Number of caps required according to the location of the top within a bench mm spacer kit QH25 30mm spacer kit QH30 35mm spacer kit QH35 40mm spacer kit QH40 Leg caps (each) Standard frames QCAP Rectangular frames QCAPR Square frames QCAPQ QSPA SCREENS FOR BENCH DESKS UPHOLSTERED (brackets included) If you are ordering double-sided bench desks without screens please add the /N option to the bench code at the end of the core code, before the /**. Note that single-sided bench desks with sliding tops cannot be fitted with screens as they would block the routing of cables. Floor standing screens must be used if screening is required in this circumstance. 340mm Upholstered plain frame high Replace: ~~ with frame colour + with fabric Width For single-sided For double-sided Grp Grp2 Pinnable (with fixed tops only) 000mm QS0034SS/~~/+ QS0034SD/~~/+ 200mm QS2034SS/~~/+ QS2034SD/~~/+ 400mm QS4034SS/~~/+ QS4034SD/~~/+ 600mm QS6034SS/~~/+ QS6034SD/~~/+ 800mm* QS8034SS/~~/+ QS8034SD/~~/+ 2000mm* QS20034SS/~~/+ QS20034SD/~~/+ 340mm Upholstered with accessory bar high Replace: ~~ with frame colour + with fabric Width For single-sided For double-sided Grp Grp2 Pinnable (with fixed tops only) 000mm QS0034SS/~~/+/AB QS0034SD/~~/+/AB n/a 200mm QS2034SS/~~/+/AB QS2034SD/~~/+/AB n/a 400mm QS4034SS/~~/+/AB QS4034SD/~~/+/AB n/a 600mm QS6034SS/~~/+/AB QS6034SD/~~/+/AB n/a 800mm* QS8034SS/~~/+/AB QS8034SD/~~/+/AB n/a 2000mm* QS20034SS/~~/+/AB QS20034SD/~~/+/AB n/a 465mm Upholstered plain frame high Replace: ~~ with frame colour + with fabric Width For single-sided benches For double-sided benches Grp Grp2 Pinnable (with fixed tops only) 000mm QS0046SS/~~/+ QS0046SD/~~/+ 200mm QS2046SS/~~/+ QS2046SD/~~/+ 400mm QS4046SS/~~/+ QS4046SD/~~/+ 600mm QS6046SS/~~/+ QS6046SD/~~/+ 800mm* QS8046SS/~~/+ QS8046SD/~~/+ 2000mm* QS20046SS/~~/+ QS20046SD/~~/+ 505mm Upholstered plain frame high Replace: ~~ with frame colour + with fabric Width For single-sided benches For double-sided benches Grp Grp2 Pinnable (with fixed tops only) 000mm QS0050SS/~~/+ QS0050SD/~~/+ 200mm QS2050SS/~~/+ QS2050SD/~~/+ 400mm QS4050SS/~~/+ QS4050SD/~~/+ 600mm QS6050SS/~~/+ QS6050SD/~~/+ 800mm* QS8050SS/~~/+ QS8050SD/~~/+ 2000mm* QS20050SS/~~/+ QS20050SD/~~/+ *Caution: fabric runs vertically on all screens except those 800mm and wider, where fabric width limitations mean fabric must run horizontally: beware possible pattern mismatch. Replace + with fabric colour code (fabric colour codes are listed on our screen fabric swatch cards). Screen fabrics: Group : Bradbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer. To specify pinnable add \PN to the code. Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH 20 X-Range Specifiers Guide September 205 (updated )

21 QSPA SCREENS FOR BENCH DESKS PERSPEX (brackets included) 340mm Perspex plain frame highreplace: ~~ with frame colour Replace ** with: CG=Clear PC=Clear Frosted Width For single sided benches For double sided benches Perspex 000mm QS0034GS/~~/** QS0034GD/~~/** 200mm QS2034GS/~~/** QS2034GD/~~/** 400mm QS4034GS/~~/** QS4034GD/~~/** 600mm QS6034GS/~~/** QS6034GD/~~/** 800mm QS8034GS/~~/** QS8034GD/~~/** 2000mm QS20034GS/~~/** QS20034GD/~~/ ** Matching floor standing screens are available from our SPA screen range see the main Sven price list for details. Availability and prices on request: Screens with slatwall. Screens from our ALU range to fit X-Range bench. TRANSVERSE SCREENS FOR BENCH DESKS (brackets included) 340mm Upholstered plain frame high Replace: ~~ with frame colour + with fabric With fixed tops With sliding tops Width For single-sided benches For double sided benches Grp Grp2 For single-sided benches For double-sided benches Grp Grp2 600mm QST60034JS/~~/+ QST60034JD/~~/+ QST60034ES/~~/+ QST60034ED/~~/+ n/a QST60034SB/~~/+ 800mm QST80034JS/~~/+ QST80034JD/~~/+ QST80034ES/~~/+ QST80034ED/~~/+ n/a QSTS80034SB/~~/+ 465mm Upholstered plain frame high Replace: ~~ with frame colour + with fabric With fixed tops With sliding tops Width For single-sided benches For double-sided benches Grp Grp2 For single-sided benches For double-sided benches Grp Grp2 600mm QST60046JS/~~/+ QST60046JD/~~/+ QST60046ES/~~/+ QST60046ED/~~/+ n/a QST60046SB/~~/+ 800mm QST80046JS/~~/+ QST80046JD/~~/+ QST80046ES/~~/+ QST80046ED/~~/+ n/a QST80046SB/~~/+ To fit over the join of two tops (attaches at the rear between two screens with dumbell strip and at the front with a clamp) To fit at the end of a bench (attaches into the edge of the top with screws) To fit anywhere except directly over the join of two tops or at the end of a bench (attaches at the rear with screw fixing and at the front with a clamp). END INFILL PANEL FOR BENCH DESKS We can supply benches with end infill panels, as illustrated. These require special frames fitted with brackets on which to mount the panel and are available to special order on an extended delivery. CABLE TRAYS FOR BENCHES Single-sided Double-sided Double-sided, with cut-out for power tower on stand-alone benches. Cable trays are included with bench desks: images above for information only. Replace + with fabric colour code (fabric colour codes are listed on our screen fabric swatch cards). Screen fabrics: Group : Bradbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer. Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH X-Range Specifiers Guide September 205 (updated ) 2

22 QSPA FREESTANDING SCREENS 200mm high Width Code Grp Grp 2 43mm QS432S/~~/+ 500mm QS5002S/~~/+ 525mm QS5252S/~~/+ 600mm QS6002S/~~/+ 800mm QS8002S/~~/+ 000mm QS002S/~~/+ 200mm QS202S/~~/+ 400mm QS402S/~~/+ 43mm QS432S/~~/+ 600mm QS602S/~~/+ 63mm QS632S/~~/+ 800mm* QS802S/~~/+ FITTINGS FOR STABILISING AND LINKING Pinnable both sides add /PN 600mm high Width Code Grp Grp 2 43mm QS436S/~~/+ 500mm QS5006S/~~/+ 525mm QS5256S/~~/+ 600mm QS6006S/~~/+ 800mm QS8006S/~~/+ 000mm QS006S/~~/+ 200mm QS206S/~~/+ 400mm QS406S/~~/+ 43mm QS436S/~~/+ 600mm QS606S/~~/+ 63mm QS636S/~~/+ Pinnable both sides add /PN QSPA STABILISING FEET AND BRACKETS QSSF/M## Stabilising foot QSSFV/M## Stabilising high-visibility foot MEETING TABLES QSSFHF/M## Stabilising half-foot QSSSBPE/M## Screen stabilising bracket (screws to edge of desk top) QSPA LINKING FITTINGS Each screen is supplied with one flexible dumbell linking strip. Rigid Linking Fittings These may be used in addition to a linking strip where it is desired to lock two screens more rigidly together at 45, 60, 90 or in a straight line. 45 rigid linking bracket QSRL45/## per pack of 5 90 rigid linking bracket QSRL90/## per pack of 5 60 rigid linking bracket QSRL60/## per pack of 5 Straight rigid linking bracket QSSRL/## per pack of 5 All screens supplied with levelling feet. A stabilising foot is generally required at the beginning and end of a run of screens, and wherever there is a straight run of more than two screens. A stabilising half-foot can sometimes be used to avoid encroaching on walkways, or where an obstruction on one side of a screen precludes the use of a full foot (NB two stabilising half-feet cannot be fitted either side of a screen end post: use a full foot). A stabilising bracket can be used with desks in place of a stabilising foot, at the end of a screen run, where the final screen abuts the rear of a desk, fixed extension or storage unit and finishes flush with the end panel of the item concerned. We do not recommend a straight run of more than 4000mm without additional support from furniture or a screen linked at an angle of x800x735mm QT8/**/~~ 200x800x735mm QT2/**/~~ 600x800x735mm QT6/**/~~ 800x800x735mm QT8/**/~~ 800mm diameter QTD8/**/~~ 000mm diameter QTD0/**/~~ 200mm diameter QTD2/**/~~ 200mm diameter QTD2/**/AB 800mm diameter QTXD8/**/~~ 000mm diameter QTXD0/**/~~ 200mm diameter QTXD2/**/~~ CABLE ACCESS PORTS (for circular tables on cruciform bases only) One central port: add /AC to the table code Cable access ports are White with White tops, otherwise Slate. (for flexible cable spines please see next page) *Caution: fabric runs vertically on all screens except those 800mm and wider, where fabric width limitations mean fabric must run horizontally: beware possible pattern mismatch. Replace + with required fabric colour code (fabric colour codes are listed on our screen fabric swatch cards) Screen fabrics: Group : Bradwbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer. White=WH Zebrano=ZB Zebrano Sand=ZS To specify pinnable add \PN to the code. Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 22 X-Range Specifiers Guide September 205 (updated )

23 CONFERENCE TABLES Rectangular Bow-end Barrel Size (mm) No. of pieces Rectangular top Bow-end top Barrel top 2000 x 000 QT200R/**/~~ n/a n/a 2000 x 200 QT202R/**/~~ n/a n/a 2500 x 000 QT250R/**/~~ QT250W/**/~~ QT250B/**/~~ 2500 x 200 QT252R/**/~~ QT252W/**/~~ QT252B/**/~~ 3000 x 200 QT302R/**/~~ QT302W/**/~~ QT302B/**/~~ 3500 x QT352R/**/~~ QT352W/**/~~ QT352B/**/~~ 4000 x QT402R/**/~~ QT402W/**/~~ QT402B/**/~~ 4500 x QT452R/**/~~ QT452W/**/~~ QT452B/**/~~ 5000 x QT502R/**/~~ QT502W/**/~~ QT502B/**/~~ Rectangular Bow-end Barrel Size (mm) No. of pieces Rectangular top Bow-end top Barrel top 2000 x 000 QTX200R/**/~~ n/a n/a 2000 x 200 QTX202R/**/~~ n/a n/a 2500 x 000 QTX250R/**/~~ QTX250W/**/~~ QTX250B/**/~~ 2500 x 200 QTX252R/**/~~ QTX252W/**/~~ QTX252B/**/~~ 3000 x 200 QTX302R/**/~~ QTX302W/**/~~ QTX302B/**/~~ 3500 x QTX352R/**/~~ QTX352W/**/~~ QTX352B/**/~~ 4000 x QTX402R/**/~~ QTX402W/**/~~ QTX402B/**/~~ 4500 x QTX452R/**/~~ QTX452W/**/~~ QTX452B/**/~~ 5000 x QTX502R/**/~~ QTX502W/**/~~ QTX502B/**/~~ IMPORTANT NOTE: GRAIN MATCHING ON TABLES Woodgrain on table tops runs lengthways on one-piece tables and side-to-side on two piece tables except on tables 4500 and 5000mm long, where for technical reasons the grain must run lengthways. There is inevitably an unpredictable degree of mismatch between the grain on adjacent sections of two piece tables in MFC, which is more noticeable on darker or heavily grained finishes such as Natural Walnut and Natural Oak, and more apparent on tables over 4000mm because end-to-end grain mismatch is more obvious than side to side. We recommend that customers are made aware of these limitations especially with Natural Walnut MFC or Natural Oak MFC on 4500 and 5000mm tables. CABLE MANAGEMENT FOR CONFERENCE TABLES CABLE ACCESS PORTS One port centred at each end of the table: on leg frame tables, inset by 500mm on rectangular and barrel tops, and 000mm on bow-end tops. on cruciform base tables positioned over the central column at each end. Add /AC to the table code (Cable Access Ports are White with White tops, otherwise Slate) CABLE TRAYS (for leg bases only not QTX) Size Rectangular (mm) and Barrel tops Bow-end 2500 QCT25 QCT25B 3000 QCT30 QCT30B 3500 QCT35 QCT35B 4000 QCT40 QCT40B 4500 QCT45 QCT45B 5000 QCT50 QCT50B Cable trays run up to the central (third) leg at each end of the table. Not compatible with cruciform bases/qtx tables. Flexible cable spine Black QFTS/BK Silver QFTS/SV White QFTS/WH Extendable cable spine Black QSLK/BK Silver QSLK/SV White QSLK/WH White=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 23

24 CONFERENCE TABLE SEATING GUIDELINES Rectangular 2000x 000mm 2500x 000mm x 200mm 2500x 200mm 3000x 200mm 3500x 200mm Barrel 2500x 000mm 2500x 200mm 3000x 200mm 3500x 200mm Bow-end 2500x 000mm 2500x 200mm 3000x 200mm 3500x 200mm Rectangular 4000x200mm 4500x200mm 5000x200mm Barrel 4000x200mm 4500x200mm 5000x200mm Bow-end 4000x200mm 4500x200mm 5000x200mm These seating capacities are intended to provide an initial guide, but please make your own calculations based on the actual dimensions of the chairs you will be using and the amount of space you wish to provide for each person. Tables up to and including 3000mm long have a one-piece top: tables 3500mm to 5000mm inclusive have two piece tops. Please ensure access is adequate before ordering. 24 X-Range Specifiers Guide September 205 (updated )

25 GP RECTANGULAR DESKS GP desks feature that same distinctive D-section leg as the standard X-Range bench desk frame. GP RECTANGULAR DESKS Size (mm) Code Price Cable Tray 400x800 QGD4/**/M~~ QGCT2S 600x800 QGD6/**/M~~ QGCT4S 800x800 QGD8/**/M~~ QGCT6S GP COMPACT CORNER DESKS Size (mm) Code Price Cable Tray Front Side 600x000x800/600 QGCC6L(R)/**/M~~ QGCT4S QGCT8S 800x000x800/600 QGCC8L(R)/**/M~~ QGCT6S QGCT8S L left handed GP FIXED RETURNS R right handed RETURNS WITH THREE DRAWER PEDESTAL Size (mm) Code Price 800x600 QGR/**/M~~ 000x600 QGR0/**/M~~ Fixed returns are unhanded. They cannot be fitted with modesty panels. GP MODESTY PANELS (optional) Pedestal with 2 drawers + file drawer. Size (mm) Code Price 800x600 QRP3/** 000x600 QRP30/** CONFERENCE EXTENSIONS Size (mm) Code Price 800 (side) QGMP8/** 000 (compact corner side) QGMP0/** 400 QGMP4/** 600 QGMP6/** 800 QGMP8/** Size (mm) Code Price 300mm diam Fits 800mm end of desk QCE3/**/~~ 600x470 For desks placed back to back QCE60/**/~~ 640x470 For desks separated by a QLS freestanding or desk-mounted QCE64/**/~~ screen QCE3 and QCE60 are unhanded and may also be fitted to single and double-sided bench desks respectively. PEDESTALS MFC (common to all X-Range desks) Desk height x 600mm deep Desk height x 800mm deep Mobile Low Mobile Narrow Mobile Pentray 2 small drawers filing drawer 43x600x735mm QEP3/** 2 small drawers filing drawer 43x800x735mm QDDP3/** 2 small drawers filing drawer 43x600x645mm QFP3M/** small drawer filing drawer 43x600x490mm QLP2M/** 2 small drawers filing drawer 320x600x645mm QNP3M/** Fits top drawer of any pedestal, except narrow pedestals 356x238x28 QPEN White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Black=BK Slate=SL Silva=SA White=WH [At 5% uplift: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Specifiers Guide September 205 (updated ) 25

26 FREESTANDING DESK PANEL AND FRAME OPTIONS EXPLAINED X-Range desks, workstations and returns are available either on timber panel ends, or on two styles of metal frame. The B pattern frame has twin uprights formed from rectangular section tube. A cable riser (in slate only) may be added between the uprights as an optional extra. The M pattern frame has a single wide upright formed from a radiused (rounded) section, and incorporates a cable management riser (in slate) as standard, concealed on the inside of the upright. Both frame styles are available finished in Slate, Silva or White. The metal corner leg on metal frame desks matches the frame colour specified: on panel end corner desks and 20 workstations the corner leg is finished in slate by default. Panel B pattern frame M pattern frame Cable access ports are White with white tops, otherwise always in Slate. All desks and returns are 735mm high. All X-Range Cable Management is accessible from the user side of the desk. This ensures that cables remain accessible even where desks are placed back to back, or up against walls or screens. See page 29 for cable management accessories. RECTANGULAR DESKS WAVE DESKS with panel ends Size (mm) Code Price 800x800 QD8/** 000x800 QD0/** 200x800 QD2/** 400x800 QD4/** 600x800 QD6/** 800x800 QD8/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 800x800 QD8/**/B~~ QD8/**/M~~ 000x800 QD0/**/B~~ QD0/**/M~~ 200x800 QD2/**/B~~ QD2/**/M~~ 400x800 QD4/**/B~~ QD4/**/M~~ 600x800 QD6/**/B~~ QD6/**/M~~ 800x800 QD8/**/B~~ QD8/**/M~~ with panel ends L left handed R right handed Size (mm) Code (left handed) Code (right handed) 400x800/000 QW4L/** QW4R/** 600x800/000 QW6L/** QW6R/** 800x800/000 QW8L/** QW8R/** Price with metal frames L left handed R right handed Size (mm) Code (B frame) Price Code (M frame) Price 400x800/000 QW4L(R)/**/B~~ QW4L(R)/**/M~~ 600x800/000 QW6L(R)/**/B~~ QW6L(R)/**/M~~ 800x800/000 QW8L(R)/**/B~~ QW8L(R)/**/M~~ DOUBLE-WAVE DESKS with panel ends Size (mm) Code Price 600x000/800/000 QWD6/** 800x000/800/000 QWD8/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 600x000/800/000 QWD6/**/B~~ QWD6/**/M~~ 800x000/800/000 QWD8/**/B~~ QWD8/**/M~~ Metal frame codes: B~~ = rectangular tube frame with twin uprights: M~~ = radiused tube frame with integral wire management White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Slate=SL Silva=SA White=WH 26 X-Range Specifiers Guide September 205 (updated )

27 Guidance notes space saving Compact Wave Desks and Compact Wave Workstations Our standard wave desks have a minimum depth of 800mm and a maximum of 000mm. Our Compact Wave Desks, Compact Double-Wave desks and Compact Wave Workstations (with integral pedestal) are 200mm shallower, with a minimum depth of 600mm and a maximum of 800mm. This still provides adequate depth to work with a flat screen monitor (up to 20 ) positioned towards the rear of the wave section whilst offering a significant reduction in planning footprint. Our Compact Wave Desks are 200mm wide and are designed to be used with either a narrow mobile pedestal underneath the desk (leaving an 800mm kneehole), or with a desk height pedestal 800mm or 600mm deep to either side of the desk. Our Compact Wave Workstations are available in widths of 200mm, 400mm and 600mm. The 200mm workstations incorporate a narrow three drawer pedestal: the 400mm and 600mm workstations incorporate a standard width three drawer pedestal. Our Compact Double-Wave Desks are available in widths of 400mm and 600mm and are designed to be used with either standard mobile pedestals or narrow mobile pedestals. COMPACT WAVE DESKS with panel ends L left handed R right handed Code Code Size (mm) (left handed) (right handed) 200x800/600 QWR2L/** QWR2R/** Price with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 200x800/600 QWR2L(R)/**/B~~ QWR2L(R)/**/M~~ L left handed R right handed COMPACT WAVE WORKSTATIONS WITH INTEGRAL PEDESTAL with panel ends L left handed R right handed Size (mm) Code (left handed) Code (right handed) 200x800/600 QWW2L/** QWW2R/** 400x800/600 QWW4L/** QWW4R/** 600x800/600 QWW6L/** QWW6R/** Price with metal frames L left handed R right handed Size (mm) Code (B frame) Price Code (M frame) Price 200x800/600 QWW2L(R)/**/B~~ QWW2L(R)/**/M~~ 400x800/600 QWW4L(R)/**/B~~ QWW4L(R)/**/M~~ 600x800/600 QWW6L(R)/**/B~~ QWW6L(R)/**/M~~ Pedestal, Drawer & Accessories: 200mm workstations have an integral narrow (320mm wide) pedestal. 400mm and 600mm workstations have an integral standard (43mm wide) pedestal. QPEN Pentray fits the top drawer of standard pedestals (does not fit narrow pedestals) COMPACT DOUBLE-WAVE DESKS with panel ends Size (mm) Code Price 400x800/600/800 QWCD4/** 600x800/600/800 QWCD6/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 400x800/600/800 QWCD4/**/B~~ QWCD4/**/M~~ 600x800/600/800 QWCD6/**/B~~ QWCD6/**/M~~ Metal frame codes: B~~ = rectangular tube frame with twin uprights: M~~ = radiused tube frame with integral wire management White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Slate=SL Silva=SA White=WH X-Range Specifiers Guide September 205 (updated ) 27

28 CORNER DESK OPTIONS EXPLAINED We offer both Corner Desks and Compact Corner Desks. Our Compact Corner Desks are 200mm shallower which results in a useful reduction in planning footprint and are intended for use with flat monitor screens. We offer Corner Desks and Compact Corner Desks in standard and Simple variants. Standard Corner Desks have a panel (or frame) at one end, with a corner leg and further panel or frame supporting the other end. On Simple Corner Desks the corner leg and second panel/frame are replaced by a single panel/frame. This simplified construction results in cost savings that are reflected in lower prices. Corner Desks Simple Corner Desks CORNER DESKS L left handed L left handed R right handed R right handed with panel ends Size (mm) Code (left handed) Code (right handed) Price 400x200x800/600 QC4L/** QC4R/** 600x200x800/600 QC6L/** QC6R/** 800x200x800/600 QC8L/** QC8R/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 400x200x800/600 QC4L(R)/**/B~~ QC4L(R)/**/M~~ 600x200x800/600 QC6L(R)/**/B~~ QC6L(R)/**/M~~ 800x200x800/600 QC8L(R)/**/B~~ QC8L(R)/**/M~~ SIMPLE CORNER DESKS L left handed R right handed L left handed R right handed with panel ends Size (mm) Code (left handed) Code (right handed) Price 400x200x800/600 QCS4L/** QCS4R/** 600x200x800/600 QCS6L/** QCS6R/** 800x200x800/600 QCS8L/** QCS8R/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 400x200x800/600 QCS4L(R)/**/B~~ QCS4L(R)/**/M~~ 600x200x800/600 QCS6L(R)/**/B~~ QCS6L(R)/**/M~~ 800x200x800/600 QCS8L(R)/**/B~~ QCS8L(R)/**/M~~ COMPACT CORNER DESKS L left handed L left handed R right handed R right handed with panel ends Size (mm) Code (left handed) Code (right handed) Price 600x000x800/600 QCC6L/** QCC6R/** 800x000x800/600 QCC8L/** QCC8R/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 600x000x800/600 QCC6L(R)/**/B~~ QCC6L(R)/**/M~~ 800x000x800/600 QCC8L(R)/**/B~~ QCC8L(R)/**/M~~ SIMPLE COMPACT CORNER DESKS L left handed L left handed R right handed R right handed with panel ends Size (mm) Code (left handed) Code (right handed) Price 600x000x800/600 QCCS6L/** QCCS6R/** 800x000x800/600 QCCS8L/** QCCS8R/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 600x000x800/600 QCCS6L(R)/**/B~~ QCCS6L(R)/**/M~~ 800x000x800/600 QCCS8L(R)/**/B~~ QCCS8L(R)/**/M~~ Metal frame codes: B~~ = rectangular tube frame with twin uprights: M~~ = radiused tube frame with integral wire management White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Slate=SL Silva=SA White=WH 28 X-Range Specifiers Guide September 205 (updated )

29 20 WORKSTATION with panel ends Size (mm) Code Price 000x000x800 QC20/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 000x000x800 QC20/**/B~~ QC20/**/M~~ FREESTANDING RETURNS with panel ends) with panel ends Size (mm) Code Price 800x600 QR/** 000x600 QR0/** L left handed R right handed left handed right handed Size (mm) Code Price 000x600/800 QWRL/** QWRR/** with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 800x600 QR/**/B~~ QR/**/M~~ 000x600 QR0/**/B~~ QR0/**/M~~ with metal frames Size (mm) Code (B frame) Price Code (M frame) Price 000x600/800 QWRL(R)/**/B~~ QWRL(R)/**/M~~ L left handed R right handed FIXED RETURNS WITH THREE DRAWER PEDESTAL (unhanded) Pedestal with 2 drawers + file drawer Size (mm) Code Price 800x600 QRP3/** 000x600 QRP30/** To fit rectangular desks, simple corner desks and simple compact corner desks only. These returns may also be used with X-Range bench with fixed tops only. CONFERENCE EXTENSIONS Size (mm) Code Price 300mm diam Fits 800mm end of desk QCE3/**/~~ CABLE MANAGEMENT ACCESSORIES FOR DESKS Cable riser to fit any B~~ frame. Sold individually. (M~~ frames incorporate an integral cable riser) Slate QCR/SL Zinc QCR/ZN White QCR/WH 600x470 For desks placed back to back QCE60/**/~~ 640x470 For desks separated by a QLS freestanding or desk-mounted QCE64/**/~~ screen QCE3 and QCE60 may also be fitted to single and double sided bench desks respectively. Cable trays to fit to inside of modesty panel To fit: QD8, QD8F, QR, QWW2, QWW4 QX8 To fit: QD0, QD0F, QWW6, QWRL/R, QR0, QC20 QX0 To fit: QD2, QD2F QX2 To fit: QD4, QD4F, QW4L/R, QC4L/R, QCC4L/R, QCS4L/R, QCCS4L/R QX4 To fit: QD6, QD6F, QW6L/R, QWD6, QCCS6L/R front, QCS6L/R front, QCC6L/R front, QC6L/R front QX6 To fit: QD8, QD8F, QW8L/R, QWD8, QCCS8L/R front, QCS8L/R front, QCC8L/R front, QC8L/R front QX8 To fit: QC4L/R side, QC6L/R side, QC8L/R side QXC To fit: QCC4L/R side, QCC6L/R side, QCC8L/R side QXCC All X-Range Cable Management is accessible from the user side of the desk. This ensures that cables remain accessible even where desks are placed back to back, or up against walls or screens. Metal frame codes: B~~ = rectangular tube frame with twin uprights: M~~ = radiused tube frame with integral wire management White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal frame colour: Slate=SL Silva=SA White=WH X-Range Specifiers Guide September 205 (updated ) 29

30 RECEPTIONS SPECIFICATIONS AND FOOTPRINTS Desks are 735mm high. Deskovers are 400mm high (externally). Deskovers are 375mm high (internally). Components may be combined as desired. Desks may be used with or without deskovers or glass shelves Planning footprints for Quadrant and Radius components 262mm 892mm 892mm 2252mm 592mm RECEPTION DESKS RECEPTION DESKOVERS 592mm The metal kickstrips and vertical coverstrips between modules are available in Silva or Faux Chrome: coverstrips are also available in White. White base is a combination of vertical panels in standard White MFC with tops in any standard finish. We also offer a premium combination (Group 3) of Gloss White MFC on vertical panels, with tops in any standard finish, kickstrips in Faux Chrome and coverstrips in White or Faux Chrome. Group : Any standard or White base combination finish with Silva kickstrips (where applicable) and coverstrips. Group 2: Any standard or White base combination finish with Faux chrome kickstrips (where applicable) and matching or White coverstrips. Group 3: Gloss White vertical panels with Faux chrome kickstrips (where applicable) and coverstrips in White or Faux Chrome. all 735mm high Rectangular Size (mm) Code Grp Grp 2 Grp 3 800x800 Q2D8F/**/M~~ 000x800 Q2D0F/**/M~~ 200x800 Q2D2F/**/M~~ 400x800 Q2D4F/**/M~~ 600x800 Q2D6F/**/M~~ 800x800 Q2D8F/**/M~~ 2000x800 Q2D20F/**/M~~ all 400mm high Size (mm) Code Grp Grp 2 Grp 3 Rectangular 43x400 Q2DO4/**/M~~ 800x400 Q2DO8/**/M~~ 000x400 Q2DO0/**/M~~ 200x400 Q2DO2/**/M~~ 400x400 Q2DO4/**/M~~ 600x400 Q2DO6/**/M~~ 800x400 Q2DO8/**/M~~ 2000x400 Q2DO20/**/M~~ with modesty panel inset by 500mm (to facilitate wheelchair access): Size (mm) Code Grp Grp 2 Grp 3 800x800 Q2D8F/**/D/M~~ 000x800 Q2D0F/**/D/M~~ 200x800 Q2D2F/**/D/M~~ 400x800 Q2D4F/**/D/M~~ 600x800 Q2D6F/**/D/M~~ 800x800 Q2D8F/**/D/M~~ 2000x800 Q2D20F/**/D/M~~ Curved 90 arc x arc x400 (see note below) Q2DO90Q/**/M~~ Q2DO42R/**/M~~ Quadrant - small Size (mm) Code Grp Grp 2 Grp 3 90 x800 Q2L90QF/**/M~~ The Q2L90QF must be ordered with at least one recessed panel (see below) to allow access when assembling. N.B. this unit does not provide sitting space. Quadrant - large 600r.x800 Q2L90RF/**/M~~ (600r is nominal: the actual radius is 592mm) 600r. x400 Q2DO90R/**/M~~ The Q2DO42R may be used to cover half the width of a Q2L90RF, or combined with a Q2GS45RM reception glass shelf to cover the whole width. It is 42 (rather than 45 ) to avoid part-covering the central cable port on the desk below. To specify Recessed End Panels: Add to the end of the code: /LP for left panel /RP for right panel /BP for both panels Recessed panels should only be fitted if the desk is linked to a supporting unit on at least one side. Recessed panels cannot be specified on desks with inset modesty panel. Replace ** Standard: Beech=QB Concrete=CC Macassar=MC Maple=QP Natural Oak=NO Natural Walnut=WN Wenge=WG White=WH with finish: Zebrano=ZB Zebrano Sand=ZS White base: Add suffix W for tops in the selected finish and all other panels in White Premium: Gloss White vertical panels combined with tops in any standard finish. Add H to any standard finish code. Replace ~~ with metal colour Silva coverstrips and kickplates=sa Faux Chrome coverstrips and kickplates=fc White coverstrips + Faux Chrome kickplates=wh 30 X-Range Specifiers Guide September 205 (updated )

31 RECEPTION PEDESTAL Group : Any standard or White base combination finish with Silva kickstrips and coverstrips. Group 2: Any standard or White base combination finish with Faux Chrome kickstrips and matching or White coverstrips. Group 3: Gloss white vertical panels with Faux Chrome kickstrips and coverstrips in White or Faux Chrome. Desk height (735mm), desk depth counter pedestal with kickplate. Size (mm) Code Grp Grp 2 Grp 3 43x800 Q2DDP3/**/K~~ Replace ** Standard: QO=Oak NO=Natural Oak QB=Beech MC=Macassar WN=Natural Walnut WH=White Maple=QP with finish: Zebrano=ZB Zebrano Sand=ZS White base: Add suffix W for tops in the selected finish and all other panels in White Premium: Gloss White vertical panels combined with tops in any standard finish. Add H to any standard finish code. Replace ~~ with metal colour SA=Silva coverstrips and kickplates FC=Faux Chrome coverstrips and kickplates WH=White coverstrips + Faux Chrome kickplates RECEPTION GLASS SHELVES ON COLUMN SUPPORTS Faux Size (mm) Code Silva Chrome 800x300x22 QGS8/M~~ 000x300x22 QGS0/M~~ 200x300x22 QGS2/M~~ 400x300x22 QGS4/M~~ 600x300x22 QGS6/M~~ 800x300x22 QGS8/M~~ 2000x300x22 QGS20/M~~ 90 x300x22 Q2GS90Q/M~~ To fit Q2L90QF 600r. x300x22 (curved) Q2GS45R/M~~ Half the arc of a Q2L90RF. One or two may be fitted to a Q2L90RF As above, with perforated steel front panel Faux Size (mm) Code Silva Chrome 800x300x22 QGS8M/M~~ 000x300x22 QGS0M/M~~ 200x300x22 QGS2M/M~~ 400x300x22 QGS4M/M~~ 600x300x22 QGS6M/M~~ 800x300x22 QGS8M/M~~ 2000x300x22 QGS20M/M~~ 90 x300x22 Q2GS90QM/M~~ To fit Q2L90QF 600r. x300x22 (curved) Q2GS45RM/M~~ Half the arc of a Q2L90RF. One or two may be fitted to a Q2L90RF Glass is 0mm thick, hardened and toughened. 800mm and 000mm wide shelves have two support columns: 200mm, 400mm and 800mm have three and 2000mm four. COFFEE TABLES 600x600x400mm QCT6/**/AB 600x000x400mm QCT0/**/AB 800 diam. x 400mm QCTD8/**/AB 600 diam. x 400mm QCTXD6/**/~~ 800 diam. x 400mm QCTXD8/**/~~ White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with metal colour for columns/front panels: Silva=SA Faux Chrome=FC Replace ~~ with metal colour for table frames: Slate=SL Silva=SA White=WH X-Range Specifiers Guide September 205 (updated ) 3

32 DESK HEIGHT STORAGE UNITS, 525MM DEEP Open (inc. one 8mm shelf) 800x525x735mm QS7/** 000x525x735mm QS70/** Panel doors, locking (inc. one 8mm shelf) 800x525x735mm QS7A/** 000x525x735mm QS70/A/** Two filing drawers, locking 800x525x735mm QS7D/** 000x525x735mm QS70/D/** Vertical tambour, locking, empty 800x525x735mm QS7T/**/~~ Side opening tambour, locking, empty 000x525x735mm QS70S/**/~~ S or S3 DESK HEIGHT STORAGE UNITS WITH 600MM DEEP TOPS Open (inc. one 8mm shelf) 800x600x735mm QSE7/** 000x600x735mm QSE70/** Panel doors, locking (inc. one 8mm shelf) 800x600x735mm QSE7A/** 000x600x735mm QSE70A/** Two filing drawers, locking 800x600x735mm QSE7D/** 000x600x735mm QSE70D/** Vertical tambour, locking, empty 800x600x735mm QSE7T/**/~~ S or S3 Side opening tambour, locking, empty 000x600x735mm QSE70S/**/~~ S or S3 Note: woodgrain on storage units with runs front to back, for use as an extension to a corner desk. Left to right grain may be ordered as a special. STORAGE UNITS 200MM 2000MM, 525MM DEEP BOOKCASES Open Open Sliding glass doors 000x525x200mm QS20/** 000x525x600mm QS60/** Full height panel doors, locking 000x525x2000mm QS200/** S2 S2 S2 800x400x865mm QB8/** 000x400x865mm QB80/** S4 S5 800x400x865mm QB8G/** 000x400x865mm QB80G/** (Stacks on 735mm unit to give height of 600mm) SHELF UNITS 400MM DEEP S4 S5 000x525x200mm QS20A/** 000x525x600mm QS60A/** Side Opening plastic tambour, locking 000x525x2000mm QS200A/** S2 S2 S2 Incl. one 8mm shelf 800x400x735mm QB7/** 000x400x735mm QB70/** 000x400x200mm QB20/** 000x525x200mm QS20S/**/~~ 000x525x600mm QS60S/**/~~ 000x525x2000mm QS200S/**/~~ S S S 000x400x600mm QB60/** Incl. one 25mm shelf 000x400x2000mm QB200/** Shelf for 000 x 400mm deep shelf units (25mm) QBS025/** Safety note: 2000x400mm units must be angled slightly backwards against a wall, and ideally wall-fixed. White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White Replace ~~ with tambour colour: Slate=SL Silva=SA White=WH 32 X-Range Specifiers Guide September 205 (updated )

33 DESK HEIGHT STORAGE UNITS, 525MM DEEP STORAGE FITTINGS Side opening tambour units are 000mm wide externally but take 800mm fittings. All storage units are priced empty except where indicated. All 2000mm high units (excluding tambour units) are fitted with one matching 25mm shelf to aid structural stability in transit and use. This shelf must be fitted as close to the centre of the storage unit as possible. IMPORTANT SAFETY NOTES: When fitting roll out filing frames in storage/tambour units, for safety and stability reasons always fit and load starting at the very bottom of the unit. Always fully load the lower roll out filing frame before starting to load the frame above and never put more than three roll-out filing frames in a storage unit. Never roll out more than one frame at a time. Anti-tilt cable kits are available as an optional extra at point of purchase. When installing storage units it is advisable to set the unit so that it is leaning slightly backwards. This ensures that frames cannot roll out unintentionally. For stability reasons we do not recommend fitting roll out filing frames behind double doors on desk height units, unless optional counterbalance weights are fitted. Storage units are supplied assembled as standard. Any 800mm or 000mm storage unit may be supplied KD for an additional charge. Anti-tilt Cables YAT2 Anti-tilt cable kit for 2 file frames (supply only) YAT2F As above, factory fitted (specified at point of order) YAT3 Anti-tilt cable kit for 3 file frames (supply only) YAT3F As above, factory fitted (specified at point of order) Roll out filing frame, A4/foolscap 800mm QFF8 000mm QFF0 S S2 Lateral & print-out filing rail 800mm QLF8 000mm QLF0 S S2 (NB 000mm side tambours take 800mm fittings) Storage Unit Shelf 800mm x 525 x25mm S QS825/** 000mm x 525 x 25mm S2 QS025/** Shelf for low storage (QS7) 800mm x 525 x 8mm S3 QS8/** Bookcase Shelf 800mm x 400 x 25mm S4 QBS825/** 000mm x 400mm (25mm) S5 QBS025/** S S2 S3 S4 S5 codes next to each unit and each size of shelf indicate which shelves to order to fit the unit concerned. The We do not list shelf codes against low units that are supplied with a shelf as standard. LOCKERS 735mm high x 525mm deep (internal depth 475mm). 800mm and 400mm wide. compartment 347mm x 667mm QL745/** 2 compartments each 347mm x 324mm QL7452/** 2 compartments each 36mm x 667mm QL7852/** 4 compartments each 36mm x 324mm QL7854/** 725mm high x 525mm deep (internal depth 475mm). 400mm wide. compartment 347mm x 657mm QL745/** 2 compartments each 347mm x 89mm QL7452/** 3 compartments each 347mm x 540mm QL7453/** 4 compartments each 347mm x 400mm QL7454/** 5 compartments each 347mm x 33mm QL7455/** Options priced per door (lockers have mastered key locks with captive keys* as standard) Electronic combination lock (with master code override) Letter slot Finger pull (only with key lock) Name holder *A captive key remains in the lock when it is opened, enabling the key to be used to open the door. Key lock and fingerpull Electronic lock Name holder Letter slot White=WH Zebrano=ZB Zebrano Sand=ZS Add suffix W for tops in the selected finish and all other panels in White X-Range Specifiers Guide September 205 (updated ) 33

34 QSLS SCREENS: INTRODUCTION Overview QLS screens have a 40mm thick extruded thermoplastic frame, in either Slate or Silva finish. The innovative design-registered linking system makes QLS screens very easy to specify, install and reconfigure: see next page for details. The QLS screen system offers freestanding screens in rectangular solid and part-glazed variants, and solid wave-top screens, in heights from 000mm to 800mm. Curved screens are also available; solid, glazed and par glazed. Matching desk-mounted QLS screens are available in rectangular and wave shapes. Guidelines for specifying QLS screens. Locate the code for the screen you require. 2. Replace the ## in the code with the letters for the frame colour desired. (SL=Slate, SA=Silva). 3. Select the fabric range. Replace + at the end of the code with the fabric colour (colour codes listed on our screen fabric swatch cards). 4. Calculate the number of stabilising feet and/or brackets required. 5. Check if additional linking strips required (each screen supplied with one strip). Important note regarding 800mm wide screens Fabric runs vertically on all screens except those 800mm wide, where limitations of the width of the fabric rolls mean fabric must run horizontally. This means that any pattern in the fabric on an 800mm wide screen will mismatch any adjacent smaller screens. Even plain fabrics with no apparent pattern may appear a different colour/shade when upholstered in a different orientation. We list 800mm wide screens because their use can substantially reduce costs in circumstances where otherwise two smaller screens would have to be used. However, specifiers should avoid using 800mm screens in patterned fabrics and must be aware of the potential for perceived mismatch even with plain fabrics. FOR BENCH-MOUNTED SCREENS AND MATCHING ALUMINIUM FRAMED FLOOR STANDING SCREENS PLEASE SEE PAGE Screen fabrics Group : Bradbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer DESK-MOUNTED SCREENS (be sure to order required mounting brackets see below) 265mm high Width x Ht. Code Grp Grp2 Pinnable 800 x 265 Q80026S/##/+ 000 x 265 Q0026S/##/+ 200 x 265 Q2026S/##/+ 400 x 265 Q4026S/##/+ 43 x 265 Q4326S/##/+ 600 x 265 Q6026S/##/+ 63 x 265 Q6326S/##/+ 800 x 265 Q8026S/##/+ * Change-height wave 265/465mm high 465mm high Width x Ht. Code Grp Grp2 Pinnable 800 x 465 Q80046S/##/+ 000 x 465 Q0046S/##/+ 200 x 465 Q2046S/##/+ 400 x 465 Q4046S/##/+ 43 x 465 Q4346S/##/+ 600 x 465 Q6046S/##/+ 63 x 465 Q6346S/##/+ 800 x 465 Q8046S/##/+ * Brackets for desk-mounted Screens Width x Height Code Grp Grp2 Pinnable 800 x 265/465 Q802646U/##/+ 000 x 265/465 Q02646U/##/+ 200 x 265/465 Q22646U/##/+ 400 x 265/465 Q42646U/##/+ 43 x 265/465 Q52646U/##/+ 600 x 265/465 Q62646U/##/+ 63 x 265/465 Q72646U/##/+ 800 x 265/465 Q82646U/##/+ * Clamps onto desk top where there is no panel or frame under the edge of the top. QSBSD/~~ (pair) Screws into the side of the panel or frame where there is a panel or frame under the top that prevents a clamp bracket being used. QSBE/~~ (pair) With Rectangular, Wave and Double-Wave Desks, Compact Wave and Compact Double Wave Desks, Compact Wave Workstations (codes QD, QW, QWCD, QWD, QWR, QWW) With Corner Desks and Compact Corner Desks (codes QC and QCC) With Simple Corner Desks and Simple Compact Corner Desks (codes QCS and QCCS) With 20 Workstations (code QC20) QSBSD QSBSD QSBE QSBSD QSBSD QSBSD QSBSD QSBSD QSBE QSBSD QSBE *Caution: fabric runs vertically on all screens except those 800mm and wider, where fabric width limitations mean fabric must run horizontally: beware possible pattern mismatch. Replace ## with frame colour: SL=Slate SA=Silva Replace ~~ with colour for screen brackets: SL=Slate SA=Silva Replace + with code for the fabric colour required (fabric colour codes are listed on our screen fabric swatch cards) Screen fabrics: Group : Bradbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer. To specify pinnable add \PN to the code. 34 X-Range Specifiers Guide September 205 (updated )

35 INTELLIGENT SCREEN LINKING QLS screens feature design-registered end posts, which provide the functionality of system screens with the flexibility and ease of use of dumbbell-linking. Each end post incorporates three linking channels: one centre channel and two side channels. This design makes it possible to specify screens to surround furniture simply by selecting the screens that match the furniture components concerned: screens linked at an angle do not overlap each other as is generally the case with most other dumbell-linked designs. It is also possible to link desk mounted screens to freestanding screens using the standard dumbbell strip, and to link screens of different heights. Linking two screens with a single linking strip in the central channel provides a close connection that is firm enough for most purposes. However, if it is desired to lock two screens rigidly together this may be achieved by using linking strip in both outer channels. SOLID FULL HEIGHT, STRAIGHT 000mm high Width x Height Code Grp Grp2 Pinnable 43 x 000 Q430S/##/+ 500 x 000 Q5000S/##/+ 525 x 000 Q5250S/##/+ 600 x 000 Q6000S/##/+ 800 x 000 Q8000S/##/+ 000 x 000 Q000S/##/+ 200 x 000 Q200S/##/+ 400 x 000 Q400S/##/+ 43 x 000 Q430S/##/+ 600 x 000 Q600S/##/+ 63 x 000 Q630S/##/+ 800 x 000 Q800S/##/+ * 200mm high Width x Height Code Grp Grp2 Pinnable 43 x 200 Q432S/##/+ 500 x 200 Q5002S/##/+ 525 x 200 Q5252S/##/+ 600 x 200 Q6002S/##/+ 800 x 200 Q8002S/##/+ 000 x 200 Q002S/##/+ 200 x 200 Q202S/##/+ 400 x 200 Q402S/##/+ 43 x 200 Q432S/##/+ 600 x 200 Q602S/##/+ 63 x 200 Q632S/##/+ 800 x 200 Q802S/##/+ * 600mm high Width x Height Code Grp Grp2 Pinnable 43 x 600 Q436S/##/+ 500 x 600 Q5006S/##/+ 525 x 600 Q5256S/##/+ 600 x 600 Q6006S/##/+ 800 x 600 Q8006S/##/+ 000 x 600 Q006S/##/+ 200 x 600 Q206S/##/+ 400 x 600 Q406S/##/+ 43 x 600 Q436S/##/+ 600 x 600 Q606S/##/+ 63 x 600 Q636S/##/+ 800 x 600 Q806S/##/+ * 800mm high Width x Height Code Grp Grp2 Pinnable 43 x 800 Q438S/##/+ 500 x 800 Q5008S/##/+ 525 x 800 Q5258S/##/+ 600 x 800 Q6008S/##/+ 800 x 800 Q8008S/##/+ 000 x 800 Q008S/##/+ 200 x 800 Q208S/##/+ 400 x 800 Q408S/##/+ 43 x 800 Q438S/##/+ 600 x 800 Q608S/##/+ 63 x 800 Q638S/##/+ SOLID FULL HEIGHT CURVED Rad. x Height Code Grp Grp2 900 r. x 000 Q900R0S/##/+ 900 r. x 200 Q900R2S/##/+ 900 r. x 600 Q900R6S/##/+ 900 r. x 800 Q900R8S/##/+ * Curved screens cannot be fitted with stabilising feet and must be supported by linking to solid or part-glazed screens, or to a desk. *Caution: fabric runs vertically on all screens except those 800mm and wider, where fabric width limitations mean fabric must run horizontally: beware possible pattern mismatch. Replace ## with frame colour: SL=Slate SA=Silva Replace + with code for the fabric colour required (fabric colour codes are listed on our screen fabric swatch cards) Screen fabrics: Group : Bradbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer. To specify pinnable add \PN to the code. X-Range Specifiers Guide September 205 (updated ) 35

36 PART-GLAZED STRAIGHT (glazed above 900mm) 200mm high Width x Height Code Grp Grp2 Pinnable 43 x 200 Q432P/##/**/+ 500 x 200 Q5002P/##/**/+ 525 x 200 Q5252P/##/**/+ 600 x 200 Q6002P/##/**/+ 800 x 200 Q8002P/##/**/+ 000 x 200 Q002P/##/**/+ 200 x 200 Q202P/##/**/+ 400 x 200 Q402P/##/**/+ 43 x 200 Q432P/##/**/+ 600 x 200 Q602P/##/**/+ 63 x 200 Q632P/##/**/+ 800 x 200 Q802P/##/**/+ 800mm high Width x Height Code Grp Grp2 Pinnable 43 x 800 Q438P/##/**/+ 500 x 800 Q5008P/##/**/+ 525 x 800 Q5258P/##/**/+ 600 x 800 Q6008P/##/**/+ 800 x 800 Q8008P/##/**/+ 000 x 800 Q008P/##/**/+ 200 x 800 Q208P/##/**/+ 400 x 800 Q408P/##/**/+ 43 x 800 Q438P/##/**/+ 600 x 800 Q608P/##/**/+ 63 x 800 Q638P/##/**/+ 800 x 800* Q808P/##/**/+ CHANGE HEIGHT WAVE 600mm high Width x Height Code Grp Grp2 Pinnable 43 x 600 Q436P/##/**/+ 500 x 600 Q5006P/##/**/+ 525 x 600 Q5256P/##/**/+ 600 x 600 Q6006P/##/**/+ 800 x 600 Q8006P/##/**/+ 000 x 600 Q006P/##/**/+ 200 x 600 Q206P/##/**/+ 400 x 600 Q406P/##/**/+ 43 x 600 Q436P/##/**/+ 600 x 600 Q606P/##/**/+ 63 x 600 Q636P/##/**/+ 800 x 600 Q806P/##/**/+ Width x Height Code Grp Grp2 Pinnable 800 x 000/200 Q8002U/##/+ 800 x 200/600 Q8026U/##/+ 800 x 600/800 Q8068U/##/+ 000 x 000/200 Q002U/##/+ 000 x 200/600 Q026U/##/+ 000 x 600/800 Q068U/##/+ 200 x 000/200 Q202U/##/+ 200 x 200/600 Q226U/##/+ 200 x 600/800 Q268U/##/+ 400 x 000/200 Q402U/##/+ 400 x 200/600 Q426U/##/+ 400 x 600/800 Q468U/##/+ SCREEN FEET AND BRACKETS (supplied as singles) As standard, all screens are supplied with levelling feet. The necessity for stabilising feet is dependent on the screen layout and the extent to which the layout is self-supporting. A stabilising foot is generally required at the begining and end of a run of screens, and wherever there is a straight run of more than two screens. A stabilising half foot can sometimes be used to avoid encroaching on walkways, or where an obstruction on one side of a screen precludes the use of a full foot. All stabilising feet incorporate stepless height adjustment. A stabilising bracket can be used in place of a stabilising foot at the end of a screen run, where the end of the final screen lines up with the end of the furniture. We do not recommend a straight run of more than 4000mm without additional support from furniture or a screen linked at an angle of 90. Stabilising Feet Stabilising Bracket Dumbbell linking strip QSSB Each screen is supplied with one dumbell linking strip. Additional linking strips may Screen stabilising be cut to length as required. bracket 800mm strip Stabilising foot Stabilising half-foot QSSB/M~~ QDL80/SL QSF/M~~ QSHF/M~~ Curved screens cannot be fitted with stabilising feet, and must be supported by linking to solid or part-glazed screens, or by a bracket to a desk. Replace ~~ with colour for metal components: Slate=SL Silva=SA Width x Height Code Grp Grp2 Pinnable 43 x 000/200 Q502U/##/+ 43 x 200/600 Q526U/##/+ 43 x 600/800 Q568U/##/+ 600 x 000/200 Q602U/##/+ 600 x 200/600 Q626U/##/+ 600 x 600/800 Q668U/##/+ 63 x 000/200 Q702U/##/+ 63 x 200/600 Q726U/##/+ 63 x 600/800 Q768U/##/+ 800 x 000/200* Q802U/##/+ 800 x 200/600* Q826U/##/+ *Caution: fabric runs vertically on all screens except those 800mm and wider, where fabric width limitations mean fabric must run horizontally: beware possible pattern mismatch. Replace ## with frame colour: SL=Slate SA=Silva To specify pinnable add \PN to the code. Replace ** with Perspex colour: CG=Clear PC=Clear Frosted Replace + with required fabric colour code (fabric colour codes are listed on our screen fabric swatch cards) Screen fabrics: Group : Bradbury Screen 66, Galaxy; Camira Cara Group 2: Camira Blazer Lite, Lucia, Nexus, L2, Racer. 36 X-Range Specifiers Guide September 205 (updated )

37 WORKSURFACE SHAPES Rectangular Desks (and Reception Desks) Office Tables QD8 QD0 (Q2D8F) (Q2D0F) QD2 (Q2D2F) QD4 (Q2D4F) QD6 (Q2D6F) QD8 20 Workstation Bench Desks QBS60(E)QBS62(E) QBS64(E) 200 QBS80(E) QBS82(E) QBS84(E) QBS66(E) QBD60(E)QBD62(E) QBD64(E) QDS66(E) QBS86(E) QBS68(E) QDS68(E) QBS88(E) QBS620(E) QDS620(E) QBS820(E) QT8 QT2 QT6 QT8 Compact Corner Desks/ Simple Compact Corner Desks QCC8L (QCCS8L) QCC6L (QCCS6L) Bench and pedestal returns QCC8R (QCCS8R) QCC6R (QCCS6R) 800 Ø QTD8 000 Ø QTD0 200 Ø QTD QBD80(E)QBD82(E) QBD84(E) QBD86(E) Corner Desks / Simple Corner Desks QC4L (QCS4L) 200 QC4R (QCS4R) QBD88(E) QBD820(E) QBR QRP3 QRP30 Double-Wave Desks QWD6 QWD8 QC20 QC4L (QCS4L) Wave Desks QC4L (QCS4L) QC6L (QCS6L) QC6R (QCS6R) QW4L QW4R QW6L QW6R QW8L QW8R Compact Wave Workstations (with integral pedestal) QC8L (QCS8L) QC8R (QCS8R) Compact Double-Wave Desks QWCD4 Reception Deskovers QWCD6 Freestanding Returns QR QRP 000 QR QWRL 600 QWRR QWW2L QWW2R QWW4L QWW4R QWW6L QWW6R Compact Wave Desks QWRL QWRR Conference Ends QCE3 Coffee Tables QCT6 QWR2L QCT0 QCE QCE64 QWR2R 600 Ø QCTXD Reception Glass Shelves 300 QGS QGS4 QGS Q2GS90Q Q2GS45R 800 Ø QCTD8 QCTXD8 QGS6 Q2L90RF QGS2 400 Curved Reception Desk Q2DO4 400 Q2L90QF Q2DO4 400 Q2DO90R 800 Q2DO Q2DO6 000 Q2DO0 Q2DO90Q Q2DO42R Conference Tables (2500 shown) (200 shown) (2500 shown) Q2DO (2500 shown) 200 X-Range Specifiers Guide September 205 (updated ) 37

38 SEATING UPHOLSTERY PRICE BANDS Band Bradbury Pyra Band 2 Bradbury Band 3 Bradbury Camira Band 4 Bradbury Camira Macflex Band 5 Bradbury Camira Trimcell Band 6 Agua Bradbury Camira CTP Textiles Macflex Trimcell Yarwood Band 7 Crest JMT Futura Yarwood Arizona Stirling, Omega Plus Phoenix Fizz Advantage, Xtreme Oporto (vinyl), Tavira (vinyl) Figaro (vinyl), Torro (PU faux leather) Manhattan, Sprint, Classic (vinyl) Aries (vinyl), Juno, Libra, Linetta, Lunar, Paintpot (vinyl) Flamblend, Torro Plus (PU faux leather) Chateau, Mainline, Urban, Velocity, Vita (vinyl), X2 Mardi Gras (vinyl), Sierra (vinyl) Delta (vinyl) Legend (vinyl) Dollaro (vinyl) Byron (leather), Shelly (leather) Birch (leather) Camden (leather) Further information We will upholster in customer s own material, subject to suitability. Fabric COM is charged at Band and leather COM at Band 4 (required fabric and leather to be supplied). For other upholstery enquiries please contact our Customer Service department. Samples and further information are available via the upholstery suppliers websites listed below: WEIGHT LOADING WORKING CHAIRS Gas lifts, mechanisms, bases and castors on our working chairs have all been tested to support a weight of 50kg (23.5 stone). 38 X-Range Specifiers Guide September 205 (updated )

39 EXECUTIVE CHAIRS XRE XREC Price band XRE adjustable arms Price band XREC no arms XRECA ring arms Standard Specifications Synchro mechanism: adjustable seat height: backrest height easily adjustable with concealed ratchet mechanism. Free-rolling castors, suitable for use on carpets or other soft flooring (for optional castors see next page). All chairs supplied assembled and bagged. Options Polished aluminium base... Sliding seat/seat depth adjustment... Two-tone seat/back upholstery (same fabric range)... Inflatable lumbar support... Standard Specifications Black frame Options Chrome frame... XRE2 XRE2C Price band XRE2 adjustable arms Price band XRE2C no arms XRE2CA ring arms Standard Specifications Synchro mechanism: adjustable seat height: adjustable lumbar support: adjustable seat depth. Free-rolling castors, suitable for use on carpets or other soft flooring (for optional castors see next page). All chairs supplied assembled and bagged. Options Polished aluminium base... Standard Specifications Black frame Options Chrome frame... X-Range Specifiers Guide September 205 (updated ) 39

40 WORKING CHAIRS XR XRL XR2 Price band Medium back no arms XRM & XR2M Medium back ht adj arms XRMA/HA & XR2MA/HA High back no arms XRH & XR2H High back ht adj arms XRHA/HA XR2HA/HA Large High back no arms XRLH Large High back ht adj arms XRLHA/HA Optional height adjustable arms for XR, XR2 and XRL XR3 XR4 Slim height adjustable arms for XR3 and XR4 Price band Medium back no arms XR3M Medium back slim ht adj arms XR3MA/SHA High back no arms XR3H High back slim ht adj arms XR3HA/SHA Mesh back no arms XR4 Mesh back slim ht adj arms XR4/SHA Polished aluminium base Standard Specifications Swivel chairs: 2 lever manual mechanism: adjustable seat height, adjustable back angle. Manually adjustable backrest height. Free-rolling castors suitable for use on carpets or other soft flooring. Supplied assembled and bagged. Options Two-tone seat/back upholstery (same fabric range)... Swivel chairs only Fold back height adjustable arms (addition to no arms price)... Backrest height adjustment with concealed ratchet mechanism (in place of manual adjustment)... 3 lever manual mechanism: adjustable seat height, back angle and seat angle... Synchro mechanism: adjustable seat/back angle and seat height (includes backrest height adjustment with concealed ratchet mechanism within the cost: not available on XR4)... Synchro mechanism with adjustable seat/back angle and seat height, for XR4 only... Sliding seat/seat depth adjustment... Inflatable lumbar support (not available on XR4)... Polished aluminium base... Cashier base (55mm higher column, footring, glides). Available with 2 lever mechanism only... Castors with soft wheels (50mm) for hard surfaces, free rolling... Castors with soft wheels (50mm) braked when unloaded... Castors with hard wheels (50mm) braked when unloaded... Cashier base Foldable arms - folded Foldable arms - up 40 X-Range Specifiers Guide September 205 (updated )

41 MEETING CHAIRS XRC XR2C Price band No arms black frame XRC & XR2C With arms black frame XRCA & XR2CA Options: Two-tone seat/back upholstery (same fabric range)... No arms chrome frame XRC & XR2C With arms chrome frame XRCA & XR2CA XR3C Price band No arms black frame XR3C With arms black frame XR3CA No arms chrome frame XR3C Options: Two-tone seat/back upholstery (same fabric range)... With arms chrome frame XR3CA XRV3, XRV4 Price band With arms black frame XRV3AB With arms chrome frame XRV3AC No arms black legs XRV4B XRV3: stackable three high XRV4: stackable five high XRV4: Certificated to BS 4875-:200 Test Level 4 and BS 7945:999 Options Two-tone seat/back upholstery (same fabric range)... Linking device for XRV4 (links under chair seat)... Trolley for up to six XRV3/4 chairs (code XRTROL)... Beech writing tablet for XRV4A (code XRVTAB34)... Castors (XRV4 models)... With arms black legs XRV4AB No arms chrome legs XRV4C Optional castors With arms chrome legs XRV4AC X-Range Specifiers Guide September 205 (updated ) 4

42 MEETING AND CANTEEN CHAIRS: BEAM SEATING XRB & 2 Price band (for fabric seat) unupholstered No arms 4 legs XRB Hoop arms 4 legs XRBA- Cantilever arms 4 legs XRBA-2 No arms skid frame XRB2 Frames in polished chrome. Shells in: Grey, White, Brown, Gentian Blue, Red, Black, Pale Green (stock colours in bold) Certificated to BS EN5373:3007 level 2 (general use) Stackable seven high Mobile dolly MD2 (to carry up to 25 chairs)... Stool No arms 4 legs XRBST XRB Colour Options XRC XRC XRC Colour Options Frames in polished chrome. Shells in: Black, Orange, Bordeaux, Peach, Pistachio, Grey, Blue, White (stock colours in bold) Stackable six high Tested to EN376/2002 (dimensions & safety), EN022/05 (stability), EN728/2000 (static load, fatigue and durability) XRP Finish XRP2 XRP3 Maple veneer Stackable four high Options Shell stained to finish, from list below... Oak, Cherry, Natural Walnut 42 X-Range Specifiers Guide September 205 (updated )

43 MEETING CHAIRS XRV&2 Price band XRV black frame XRV2 chrome frame Certificated to BS EN 728:200. Stackable five high Options Two-tone seat/back upholstery (same fabric range)... Hoop arms (steel encapsulated in black polypropylene)... Writing tablet (please add code XRVTAB2R for right hand tablet or XRVTAB2L for left hand tablet)... Linking device (please add code XRVLINK2)... (NB chairs are usually linked between rear legs only, but for even more rigid linking the front legs may be linked with a second device) XRV6 XRV5A Price band XRV5A with arms beech frame Stackable four high XRV5A is certificated to BS EN 5373: 2007 level 3 (severe use) Options Two-tone seat/back upholstery (same fabric range)... Frame stained to finish, from list below... Oak, Cherry, Natural Walnut Price band XRV6 no arms beech frame XRV6A with arms beech frame Stackable four high XRV6 is certificated to BS EN 5373: 2007 level 2 (strength, durabilty and safety) Options Two-tone seat/back upholstery (same fabric range)... Frame stained to finish, from list below... Oak, Cherry, Natural Walnut X-Range Specifiers Guide September 205 (updated ) 43

44 RECEPTION AND BREAKOUT SEATING XRM Price band XRM XRM2 XRM W x D x H 840x700x680mm 470x700x680mm 2070x700x680mm XRMUC Price band XRMUC Corner Sofa /L=Left handed /R=Right handed. Right handed shown above XCU Scatter Cushion (suitable for use with any XRM or XRMH seating) W x D x H 2000x450x680mm 60x70x320mm Options Two-tone seat/back upholstery (same fabric range)... Feet: Polished Chrome MFC finishes Beech (QB), Concrete (CC), Macassar (MC), Maple (QP), Natural Oak (NO), Natural Walnut (WH), Wenge (WE), White (WH), Zebrano Sand (ZS), Zebrano (ZB). Veneer finishes Cherry (CY), Light Oak (LO), Macassar Gold (MG), Macassar Tan (MT), Maple (MA), Natural Walnut (NW), Smoked Oak (SO), Wenge (WG) Feet: Polished Chrome Price band MFC top XRM Coffee Tables Veneer top Clear glass top Square (700x700x420mm) XRMCTS Black mirror glass top Rectangular (00x590x420mm) XRMCTR 44 X-Range Specifiers Guide September 205 (updated )

45 RECEPTION AND BREAKOUT SEATING XRMH Price band XRMH Single seat XRMH2 Two seat XRMH3 Three seat W x D x H 840x700x360mm 470x700x360mm 2070x700x360mm To avoid building access problems on delivery, XRMH units are supplied as upper and lower sections to be combined once positioned on site. XRMH Price band XRMHL Link Panel Finish XRMHT Table for 2 x single seats XRMHT2 Table for 2 x 2-seaters XRMHT3 Table for 2 x 3-seaters MFC 2 Veneer 3 For cable access port add /AC to the code: W x D x H 800x00x360mm W x H 500 x 655mm 900 x 655mm 500 x 655mm Options Two-tone seat/back upholstery (same fabric range)... Feet: Polished Chrome X-Range Specifiers Guide September 205 (updated ) 45

46 RECEPTION AND BREAKOUT SEATING XRT Price band XRT XRT2 XRTP XRTP W x D x H 680x600x780mm 270x600x780mm 680x600x780mm 270x600x780mm Options Two-tone seat/back upholstery (same fabric range)... 50mm Ø chrome glides (in place of standard 25mm black plastic feet): for XRT... for XRT X-Range Specifiers Guide September 205 (updated )

47 PHYSICAL MEASUREMENTS (in mm): WORKING CHAIRS G C A F D H B E A B C D E F G H Chair Chair Height of Seat Seat Seat Height of Foot Base COM Fabric in Model Height Width Backrest Width Depth Height Arm Rest Diameter Linear Metres XREA 050/ / / XREHA 050/ / /600 90/ XRE2A 30/ / XRE2HA 30/ /600 90/ XRM 90/ /600 n/a XRMA 90/ / XRMA/HA 90/ /600 90/ XRH 970/ /600 n/a XRHA 970/ / XRHA/HA 970/ /600 90/ XRLH 040/ /600 n/a XRLHA 040/ / XRLHA/HA 040/ /600 90/ XR2M 90/ /600 n/a XR2MA 90/ / XR2MA/HA 90/ /600 90/ XR2H 970/ /600 n/a XR2HA 970/ / XR2HA/HA 970/ /600 90/ XR3M 90/ /600 n/a XR3MA 90/ / XR3MA/SHA 90/ /600 90/ XR3H 970/ /600 n/a XR3HA 970/ / XR3HA/SHA 970/ /600 90/ X-Range Specifiers Guide September 205 (updated ) 47

48 PHYSICAL MEASUREMENTS (in mm): VISITORS/MEETING/CANTEEN CHAIRS C A F G D B E H A B C D E F G H Chair Chair Height of Seat Seat Seat Height of Chair COM Fabric in Model Height Width Backrest Width Depth Height Arm Rest Depth Linear Metres XRC n/a XRCA XR2C n/a XR2CA XR3C n/a XR3CA XRB n/a XRBA XRBA XRB n/a XRC n/a 460 n/a XREC n/a XRECA XRE2V n/a XRE2VA XRP n/a 50 n/a XRP n/a 530 n/a XRP n/a 530 n/a XRV n/a XRV n/a XRV3A XRV n/a XRV4A XRV n/a XRV5A XRV n/a XRV6A X-Range Specifiers Guide September 205 (updated )

49 PHYSICAL MEASUREMENTS (in mm): RECEPTION SEATING E F D A G B C A B C D E F G Chair Chair Chair Height of Seat Seat Seat COM Fabric in Model Height Width Depth Backrest Width Depth Height Linear Metres XRT XRTP XRT XRTP XRM XRM XRM XRMUC XRMCTS n/a n/a n/a n/a 2.45 XRMCTR n/a n/a n/a n/a.9 XRMH XRMH XRMH X-Range Specifiers Guide September 205 (updated ) 49

50 MFC FINISHES Beech MFC (QB) Concrete MFC (CC) Macassar MFC (MC) Maple MFC (QP) Natural Oak MFC (NO) Natural Walnut MFC (WN) Wenge MFC (WG) White MFC (WH) Zebrano Sand MFC (ZS) Zebrano MFC (ZSB) METAL COLOURS Slate (SL) White (WH) Faux Chrome (FC) Raw Steel - Matt Coated (RM) Raw Steel - Gloss Coated (RG) Silva (SA) Colour accuracy - Due to variations in lighting and the limitations of the printing process, variations in colour may occur between the illustrations in this brochure and manufactured items. Samples of all our finishes are available on request from our Customer Service Department. 50 X-Range Specifiers Guide September 205 (updated )

51 STANDARD TERMS AND CONDITIONS OF SALE. GENERAL (a) Sven Christiansen plc, hereinafter referred to as Sven plc, provide all quotations and accept all orders for the supply of furniture and goods as detailed in any quotation and/ or order subject only to the terms and conditions which follow and to the exclusion of all other guarantees, conditions and warranties (including any as to quality and fitness for any particular purpose) whether express or implied by statute or common law or otherwise. In the event of a purchaser s order containing conditions such conditions are only binding insofar as they are not inconsistent with Sven plc s terms and conditions as herein set out. (b) No additions to or variations from Sven plc s acknowledged price or terms and conditions shall have effect unless such variation or addition is expressly accepted by Sven plc in writing under the hand of a Director. Sven plc s employees or agents are not authorised to make any representations unless confirmed by a director of the company in writing. On ordering any goods and furniture and being accepted by Sven plc the Purchaser acknowledges that the contract is entered into incorporating the terms and conditions herein set out and it does not rely on and waives any claim for breach of any such representations which are not so confirmed. (c) Catalogues, price lists and other advertising matter shall not form part of any contract between Sven plc and the purchaser. Any typographical, clerical or other error, or error of omission in any sales literature, quotations, price list or any other document or information issued by Sven plc shall not be binding on Sven plc and shall be subject to correction without liability to Sven plc as vendor or provider. (d) No claims for loss or damage to furniture and goods, materials and purchaser s property, claims for bad workmanship (save as set out below) or claims for furniture and goods invoiced but not received, will be considered unless Sven plc is advised in writing within 3 days from the date of final invoice. In the event that a purchaser fails to give the appropriate notice and does not notify Sven plc in writing within the specified three day period, the purchaser s claim will deem to have been waived and the Purchaser will be barred from making any further or other claim in respect thereof. (e) Sven plc furniture is guaranteed for a period of five years against any defects resulting from faulty materials or workmanship, or for three years in the case of moving parts, provided that: i) The furniture and goods have not been subjected to any unauthorised repair or misused, abused or altered in any way whatsoever. ii) The furniture and goods have been properly installed, connected and assembled (if such works were not carried out by Sven plc). iii) Any fault or defect with the furniture and/or goods is notified in writing within three days of becoming evident. iv) The furniture and goods are returned appropriately packaged, carriage paid, to Sven plc, unless expressly agreed otherwise by Sven plc. v) Sven plc shall be under no liability in respect of any defect arising from wear and tear, wilful damage, negligence, abnormal usage or working environment, or failure to follow the manufacturer s or other provider s instructions whether oral or in writing. vi) Sven plc shall be under no liability with regard to any warranty or guarantee if the total price of the furniture and goods was not paid by the due payment date as specified in the Sven plc written acceptance of the said order. vii) Subject as expressly provided for in these Terms and Conditions and except where the Furniture and goods are sold to a person dealing as a consumer (within the meaning of the Unfair Contract Terms Act 977) all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. viii) References to Purchaser shall mean in these terms and conditions the company entity or individual ordering goods and furniture from Sven plc. 2. QUOTATIONS. Orders placed upon a quotation which has not been previously withdrawn are subject to confirmation that Sven plc accepts t he same. Unless otherwise stated all prices quoted are deemed to be exclusive of VAT. Sven plc reserves without liability, the right to at any time, reduce or withdraw discount terms and/or credit account facilities without notice, reference or explanation to the Purchaser. 3. PRICES. Sven plc shall use reasonable endeavours to maintain prices quoted and/or detailed on their order acknowledgement, but must reserve the right to increase quoted prices according to any increases in costs which take effect between acceptance and delivery/ completion of the order or that part of the order remaining undelivered/incomplete at the time of such increase. In the event that the quoted price includes elements of work in relation to which Sven plc has been unable, for whatever reason, to carry out a site survey, or in the event that Sven plc is required to carry out additional work not detailed in the original quotation, Sven plc reserves the right to amend the quoted price accordingly whereupon the price payable by the Purchaser in relation to the goods and furniture shall be adjusted accordingly. 4. TERMS OF PAYMENT. Payment shall be made to Sven plc at the time and in the manner stated in the Sven plc quotation or if no such time and manner are stated then within 30 days of the date of invoice. In all cases the prices quoted by Sven plc are strictly net. In the event of non-payment of the price quoted, Sven plc reserve the right to claim statutory interest (8% p.a. over Bank of England base rate), compensation and to recover debt recovery costs as provided for under the Late Payment of Commercial Debts (Interest) Act 998 and the Late Payment of Commercial Debt Regulations Prompt settlement discounts are subject to payment within the terms set out herein or as specified in any quotation or special terms offer. Sven plc reserve the right to re-invoice for the full pre-discounted price in the event of late or non-payment. The Purchaser shall not be entitled to withhold payment as a result of any claim it may have against Sven plc and the Purchaser may not claim any right of set off. 5. DELIVERY/COMPLETION. Sven plc will use reasonable endeavours to deliver/complete promptly but Sven plc shall be under no liability whatsoever for delay in estimated delivery/ completion times or failure to deliver/complete from any cause, nor for any loss or damage arising therefrom. Sven plc reserve the right to make partial delivery or deliveries by instalments and to invoice for such deliveries as are made. In no event will Sven plc be liable for any action of the purchaser s employees assisting in delivery. The purchaser will indemnify Sven plc against all claims, proceedings, demands and costs arising therefrom. 6. OWNERSHIP OF FURNITURE AND GOODS. (a) The title and property in all furniture and goods and materials supplied by Sven plc does not pass to the Purchaser and/or Purchaser until payment in full (for all furniture and goods whatsoever supplied) has been received therefor by Sven plc, and risk in respect of such furniture and goods passes to the purchaser from the moment of delivery to the purchaser s nominated location. (b) Until title in furniture and goods passes, the purchaser shall hold the furniture and goods as bailee for Sven plc. These furniture and goods must be stored separately from all other furniture and goods, and be clearly marked as being the property of Sven plc. (c) If payment of account is overdue (time being of the essence) or the purchaser becomes insolvent, commences winding up procedures, commits an act of bankruptcy or has a Receiver or Administrator appointed, Sven plc may immediately reclaim and recover the furniture and goods, if necessary by entering any premises owned or occupied by the purchaser. (d) If the purchaser sells the furniture and goods before title to these furniture and goods passes to him the sale shall be made by the purchaser as fiduciary agent on behalf of Sven plc. The monies due to Sven plc for payment of furniture and goods from such sale must be kept separate to other monies and be clearly denoted as monies held in trust on behalf of Sven plc. Regardless of such agency the purchaser has no right to bind Sven plc and shall, as between the purchaser and his customers, act as principal. 7. EXCLUSIONS. Liability is expressly excluded in regard to equipment not manufactured by Sven plc or procured on behalf of the purchaser from a specialist supplier except to the extent that any benefit is obtainable from the written guarantee of such a supplier or enforceable by Sven plc without legal or other expenses whatsoever and the benefit obtained shall be passed to the purchaser. If furniture and goods are to be manufactured or provided in accordance with a design/specification provided by the purchaser, the purchaser shall indemnify Sven plc against all loss, damage, costs, expenses and liability in connection with such design/specification. Sven plc shall be under no liability in respect of any defect in the furniture and goods or lack of fitness for purpose arising from any drawing, design or specification supplied by the Purchaser. 8. CANCELLATION/DELAY. Orders cannot be cancelled except with Sven plc s consent and on terms which will indemnify Sven plc against all loss. If a purchaser extends or delays a contract or part thereof or fails to accept delivery of any furniture and goods at the time agreed, or when notified that the furniture and goods are available to be delivered, then the purchaser will be liable for any and all losses incurred by Sven plc, including disruption, loss of profit, storage costs, additional transport and handling costs resulting from the purchaser s actions. If a purchaser delays receipt of delivery of any furniture and goods in excess of seven days from the date agreed, or when notified that the furniture and goods are available to be delivered, the furniture and goods will be invoiced, and payment in full shall be made by the Purchaser thirty days thereafter. For the avoidance of doubt, once delivered to the Purchaser at the address notified by the Purchaser to Sven plc or to the Purchaser s address specified on any quotation or order for such furniture and goods cannot be cancelled. 9. FORCE MAJEURE. If Sven plc is unable to perform any part of the order made by the Purchaser for a reason of force majeure or any other reason outside their reasonable control, Sven plc shall be entitled to charge the purchaser for any additional time, cost or expense incurred as a result thereof and where Sven plc is unable to perform any part of the contract for any such reason for a period of more than one week, Sven plc shall be entitled to postpone its performance of the contract until such time as it is reasonably able to recommence the contract. 0. TERMINATION. In the event that the purchaser fails to observe or perform any of their obligations under the terms of the contract, Sven plc reserve the right to terminate the contract forthwith by service of written notice of termination to the purchaser.. CONSEQUENTIAL LOSS. Sven plc shall not be liable to the purchaser by reason of any representation, or any implied warranty, condition or other term, or any duty at common law, or under the express terms of the Contract, for any consequential loss or damage (whether for loss of profit or otherwise), costs, expenses or other claims for consequential compensation whatsoever (and whether caused by the negligence of Sven plc, its employees or agents or otherwise) which arise out of or in connection with the supply of the furniture and goods or their use or resale by the purchaser, except as expressly provided in these conditions. 2. THIRD PARTY CLAIMS. If any claim is made against the purchaser that the furniture and goods or services infringe or that their use, resale or provision infringes the patent, copyright, design, trade mark or other industrial or intellectual property rights of any other person, any liability of Sven plc to the purchaser shall be subject to Sven plc being given full control of any proceedings or negotiations in connection with any such claim including the payment or settlement thereof. 3. EXPERTISE. The Purchaser hereby undertakes not to offer employment to or to employ or otherwise contract either directly or through a third party for the services of any existing employee of Sven plc or any former employee of Sven plc who has been an employee within the six months prior to being offered the employment or arrangement whereby the former employee of Sven plc would provide service to or for the Purchaser, without first obtaining the consent of Sven plc whether or not such employee has worked or served directly the needs of the Purchaser whilst he or she was an employee of Sven plc. If the Purchaser breaches the preceding provision Sven plc shall be entitled to demand and be paid liquidated damages by the Purchaser. Such sum to be determined by an arbitrator appointed by the Chartered Institute of Arbitrators. 4. DISPUTE PROCEDURE: Any dispute arising out of or in connection with these terms and conditions shall be referred to and finally resolved by arbitration under the Controlled Cost Rules of the Chartered Institute of Arbitrators, and these Rules are deemed to be incorporated herein. 5. RIGHTS. Failure by Sven plc to enforce any of the contract terms cannot be construed as a waiver of any of its rights under this contract. No waiver by Sven plc or any breach of the Contract by the Purchaser shall be considered as a waiver of any subsequent breach of the same or any other provision. If any provision of these conditions is held by any competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of these Conditions and the remainder of the provision in question shall not be affected thereby. 6. GOVERNING LAW. The Laws relating to England shall apply to any quotation or order and the terms and conditions specified herein shall be construed and operate under English Law. Terms and Conditions of Sale, revised August 20. X-Range Specifiers Guide September 205 (updated ) 5

52 Available from: sven.co.uk FM 8698 EMS Factory, Showroom, Sales & Customer Service Departments Sven Christiansen plc, 2 First Avenue, The Pensnett Estate, Kingswinford, West Midlands DY6 7TU, United Kingdom Tel: Fax (sales/service): sales@sven.co.uk London Showroom Sven Christiansen plc, Overland House, 5-53 Great Portland Street, London WW 6QW, United Kingdom Tel: Fax: london@sven.co.uk Head Office Sven Christiansen plc, Court Barn, Littleton Lane, Guildford, Surrey GU3 HW, United Kingdom Tel: Fax: Fax (transport): info@sven.co.uk XRangeSpecifier P