INDOOR WALL / CEILING ADA XPS LED NEW. Features. LED Features. Suggested Variations

Transcription

1 9 LED ADA WALL / CEILING INDOOR 5 year product warranty ADA compliant wall bracket (CV1 series models only) Extruded aluminum housing with die-cast end caps and mounting hardware Oven cured no VOC acrylic powder coat MRI option enables use in magnetic resonance imaging (MRI) rooms Easy mounting with secure aiming lock Stem, bracket or yoke mounts Zero clearance end mount for easy installation and maintenance in tight mounting applications Standard lengths from 16" to 96" Option for continuous row mounting Fluorescent or low energy, long life LED source Easy relamping Source specific optical systems Removable aiming label included with each fixture to provide accurate positioning within full 360 rotation Lens included for ease of maintenance and preservation of optical integrity Clear acrylic lens, CV1100 series and models 52" and longer for CV3210, CV3230 Clear tempered glass lens cover for models up to 36" in length (CV3210, CV3230) PSX models use with PS24 Series of 24VDC Class II remote power supplies. Each PS24 can power multiple fixtures (see total wattage table) and is available with 0-10V analog dimming. System costs are reduced by distributing the PS24 over multiple fixtures. Lowvoltage Class II wiring between the PS24 and connected fixtures simplifies installation. The PS24 is not included with fixtures; order separately - see Accessories section. High power factor integral ballast (fluorescent and CH39 HID) Remote high power factor ballast, 50' maximum ballast to lamp distance (CH70 only, CH70(347V) is 20' maximum) ETL listed to UL standards (US and Canada) for indoor damp locations Not recommended for exterior applications Features LED Features White source (3000K, 3500K) PSX models are dimmable with PS-24VDC90W02 power supply Constant current LED driver technology to protect LEDs from experiencing "over current" conditions that can cause overheating and premature failure Thermally managed within manufacturer specifications to promote long LED life No ultraviolet or infrared, alleviating potential damage to art, fabric and materials Mercury and lead free LED source reduces impact to waste stream Multiple symmetric optical distributions available Suggested Variations Custom color or material Mounting for surface junction box applications Custom row mounted configurations of varying fixture sizes and source types Increase or decrease fixture length Increase stem length through mounting variations Solid color LED or RGB color changing LED

2 8 ADVANTUS TM oke and Bracket Mounting Ceiling and wall mounting ADA compliant mounting available for 3. fixtures Stem Mounting Ceiling and wall mounting Rectangular canopy gives added strength for wall mount applications Circular canopy for ceiling and floor mount applications Aluminum canopy hides mounting hardware Die-cast mounting plate allows direct access to junction box Miro 9 reflector for compact fluorescent, ceramic metal halide and tungsten halogen produces high performance while minimizing seams and hot spots Optimized performance at a mounting angle of 25 degrees means minimal lens visibility (except LED source) Peak distribution of 35 degrees above horizontal with minimal back lighting produces excellent forward throw performance (except LED source) Optional LED source for high performance wall wash/grazing or any long throw applications Snap-in, snap-out lens allows for easy access to source Lens remains unseen in most applications Removable reflector for access to ballast and wiring Miro Silver reflector for linear fluorescent source is 98% reflective Optional blade baffle installs under lens Extruded aluminum housing with die-cast end caps Low profile 3. and diameter models

3 160 Rev: 2014/07/07 ADVANTUS TM Order Code Example CV FS14 - STW(8) BSIL - Model Number - Length 3. housing diameter CV CV CV1-24 CV CV CV CV1-36 CV CV CV CV1-48 CV CV CV CV1-72 CV CV CV CV1-96 CV Source 1FS14 1FS24 1FS21 1FS39 1FS28 1FS54 2FS21 2FS39 2FS28 2FS54 CV1100 CV1110 CV1 CV1130 STW(SL) STC(SL) Finish (Painted) Color Code Required for Painted Finishes All Models IEM IEM MLS2 IEM MLS2 CV1 and CV1130 only RB XEM Dimensions CV / CV L 28-5/8" (727 mm) SC 25-1/4" (641 mm) CV1-24 / CV L 24-3/4" (629 mm) CV / CV L 40-5/8" (1032 mm) SC 37-1/4" (946 mm) CV1-36 / CV L 36-3/4" (933 mm) CV / CV L 52-3/8" (1330 mm) SC 49" (1245 mm) CV1-48 / CV L 48-1/4" (12 mm) CV / CV L 75-3/8" (19 mm) SC 72" (1829 mm) CV1-72 / CV L 71-1/2" (1816 mm) CV / CV L 98-7/8" (2511 mm) SC 95-1/2" (24 mm) CV1-96 / CV L 9 (2413 mm) Model Number - Length housing diameter CV3210 CV3230 All Models CV3230 only Dimensions CV TF42 1CH39T6 SC CV /16 (436 mm) CV CH70T6 L 20-1/2" (522 mm) CV L 17" (432 mm) CV3210- CV3230- CV CV CV CV CV CV Source 1F40 1F50 1F55 1FO17 1FO25 2F40 1FO32 2FO25 STW(SL) STC(SL) Finish (Painted) IEM RB XEM CV3210- SC 27-11/16" (703 mm) L 31" (788 mm) CV3230- L 27-1/2" (699 mm) CV SC 38-1/4" (971 mm) L 41-5/8" (1057 mm) CV L 38-1/8" (968 mm) CV SC 51-7/16" (1306 mm) L 54-3/4" (1392 mm) CV L 51-1/4" (1302 mm) CV SC 74-3/16" (1901 mm) L 78-1/4" (1986 mm) CV L 74-1/2" (1892 mm) CV1100 CV1 CV1110 CV1130 CV3210 CV /16" 4-3/16" 1-3/4" 1-3/4" 3-1/8" 3-1/8" Power Cord Power Cord Power Cord

4 161 Aimable 360 Lens included for ease of maintenance and preservation of optical integrity L = Length MC = Mounting Center oke Mount () Bracket Mount () Wall Wall ADA Bracket Mount () Stem Mount Stem Length (SL) must be specified when ordering. Longer lengths can be accommodated through mounting variations. L = Length SL = Stem Length SC = Center of stem to center of stem Power feed can be located on either end Dimensions are based on SC a 25 degree aiming angle Ceiling Stem Mount SL minimum SL maximum CV1100 / CV /2" 36" CV /4" 36" Wall Stem Mount CV1100 / CV1110 CV3210 Power Feed 2" (51mm) L oke and Bracket Mount Mounting Center = 2-3/8" (60 mm) Mounting Center = 2-3/8" (60 mm) Wall = Depth (Wall) or Height (Ceiling) Power Feed Ceiling Ceiling Mounting Center = 2-3/8" (60 mm) 1-3/8" (35mm) Dimensions are based on a 25 degree aiming angle Body Body Body 4-1/2" 24" 5-1/4" 20" L 4" (102 mm) 6-1/8" (6 mm) 5-1/4" (133 mm) 7-7/8" (200 mm) 5-1/2" (140 mm) 6-1/8" (6 mm) 6-3/4" (171 mm) 7-7/8" (200 mm) 4" (102 mm) Abbreviation Key Indicated Finish or Option is not available with Configuration operates TF, TF32 or TF42 options and can be labeled up to the highest wattage allowed Source (Voltage) LED sources are 85CRI typical, within 4-step MacAdam Specify Voltage, MVOLT or MTAP MVOLT fixture accepts through 277 input voltage Use clear source for best FP Optics performance LCW LNW LWW F40 F50 F55 TF TF32 TF42 FO17 FO25 FO32 FO40 FS14 FS21 FS24 FS28 FS39 FS54 CH39T6 CH70T6 Cool White, 4000K, LED Neutral White, 3500K, LED Warm White, 3000K, LED 40w long twin tube, 2G11 base, FLR 50w long twin tube, 2G11 base, FLR (MVOLT; 347V) 55w long twin tube, 2G11 base, FLR (MVOLT; 347V) w triple, 4-pin GX24q-3 base, FLR (MVOLT; 347V) 32w triple, 4-pin GX24q-3 base, FLR (MVOLT; 347V) 42w triple, 4-pin GX24q-4 base, FLR (MVOLT; 347V) 17w T-8, medium bi-pin base, FLR (MVOLT; 347V) 25w T-8, medium bi-pin base, FLR (MVOLT; 347V) 32w T-8, medium bi-pin base, FLR (MVOLT; 347V) 40w T-8, medium bi-pin base, FLR (MVOLT; 347V) 14w T-5, mini bi-pin base, FLR 21w T-5, mini bi-pin base, FLR 24w T-5/HO, mini bi-pin base, FLR (MVOLT; 347V) 28w T-5, mini bi-pin base, FLR 39w T-5/HO, mini bi-pin base, FLR (MVOLT; 347V) 54w T-5/HO, mini bi-pin base, FLR (MVOLT; 347V) 39w T-6, G12 base, ceramic MH 70w T-6, G12 base, ceramic MH (MTAP; 347V) STW(SL) Wall Stem Mount, rectangular canopy STC(SL) Ceiling Stem Mount, circular canopy oke Mount for single fixture Bracket Mount ADA Bracket Mount Finishes (see inside back cover) (Painted) Color Code Required - see color chart DIM(A), DIM(L) and DIM(EB) are wattage specific DIM10 IEM MLS2 MRI RB XEM Blade baffle, not available with LED Advance Mark 10 fluorescent dimming, specify V or 277V, for F55, FS54 and TF42 only Fluorescent EcoSystem digital link dimming or Lutron Hi-Lume A-Series EcoSystem digital dimming driver Lutron H3D 3-wire fluorescent dimming, for FO32, TF42 and FS only, not available with MRI option 0-10V LED dimming, not available with MRI option Fluorescent fusing, specify V or 277V Integral emergency battery pack for fluorescent, specify V or 277V, not available with F40 Bi-level switching, for fluorescent only Non-ferrous materials for use in MRI room, LED only Remote emergency battery pack for fluorescent, not available with FO32 Pre-ship recessed components (XEM junction box) Emergency battery pack mounted in provided recessed box for fluorescent (replaces standard junction box), not available with FO32 Express 10 day shipment, not available for continuous row configurations Photometrics and 3D Modeling Complete BIM, Sketchup and Photometric files for these models can be downloaded from IES File Number LER Report CV FS24 54 CV FS39 65 CV FS CV LNW CV LNW CV FS39 65 CV FS54 67 CV LNW CV LNW CV1-24-1FS24 54 CV1-36-1FS39 65 CV1-48-1FS CV1-72-1FS39 65 CV1-96-1FS54 67 LTL Source: One 54w High Output T5 Linear Fluorescent rated at 4400 Lumens Candela Angle LTL Source: 48 white LEDs with clear prismatic plastic optics above each Candela Angle LTL Source: 48 white LEDs, no optics Candela Angle CU RCR CU RCR CU RCR INDOOR WALL / CEILING LED ADA 4-1/2 dia. 114mm 4-7/8 124mm 3 (76mm) SL SL

5 162 ADVANTUS TM See Page 161 for Abbreviation Key and Line Drawings Order Code Example CV PSX - LNW STW(8) BSIL - Model Number - Length 3. housing diameter CV PSX CV PSX CV1-24PSX CV PSX CV PSX CV PSX CV1-36PSX CV PSX CV PSX CV PSX CV1-48PSX CV PSX CV PSX CV PSX CV1-72PSX CV PSX CV PSX CV PSX CV1-96PSX CV PSX LCW1700 LNW1700 LWW1700 LCW2500 LNW2500 LWW2500 LCW3400 LNW3400 LWW3400 LCW5100 LNW5100 LWW5100 LCW6900 LNW6900 LWW6900 Source Nominal Source Lumens Power Supply is not included with PSX models. Order separately (see Accessories Section below) LCW3400 LNW3400 LWW3400 LCW5100 LNW5100 LWW5100 LCW6900 LNW6900 LWW6900 LCW10300 LNW10300 LWW10300 LCW13800 LNW13800 LWW13800 Optical Rev: 2014/07/07 CV1100PSX CV1110PSX CV1PSX CV1130PSX STW(SL) STC(SL) Finish (Painted) Color Code Required for Painted Finishes MRI Dimensions CV1100PSX-24 / CV1110PSX-24 L 28-5/8" (727 mm) SC 25-1/4" (641 mm) CV1PSX-24 / CV1130PSX-24 L 24-3/4" (629 mm) CV1100PSX-36 / CV1110PSX-36 L 40-5/8" (1032 mm) SC 37-1/4" (946 mm) CV1PSX-36 / CV1130PSX-36 L 36-3/4" (933 mm) CV1100PSX-48 / CV1110PSX-48 L 52-3/8" (1330 mm) SC 49" (1245 mm) CV1PSX-48 / CV1130PSX-48 L 48-1/4" (12 mm) CV1100PSX-72 / CV1110PSX-72 L 75-3/8" (19 mm) SC 72" (1829 mm) CV1PSX-72 / CV1130PSX-72 L 71-1/2" (1816 mm) CV1100PSX-96 / CV1110PSX-96 L 98-7/8" (2511 mm) SC 95-1/2" (24 mm) CV1PSX-96 / CV1130PSX-96 L 9 (2413 mm) Power Supply for PSX models (order separately) PS-24VDC90W01 24VDC 90 watt power supply; no dimming, 75 maximum remote distance using 16 AWG wire PS-24VDC90W02 24VDC 90 watt power supply, 0-10V dimmable, 20 maximum remote distance Accessories - Order Separately (see Technical Reference Section for additional details) Input Voltage Specify V or 277V Maximum PSX Units per Power Supply Lumens Nominal LED Source / Fixture Wattage Maximum Units / / / / / / 3 2 Power Supplies Required / Power Supplies Required LED Source Optical X 23

6 163 Wall Mount (Ceiling Wash) Model: Source: Space: Mounting Height: Reflectances: (4) CV with acrylic lens cover, 3. diameter 48" length 1FS54 (54w T-5/HO, mini bi-pin base) 12' x 12' x 14' ceiling 8' Ceiling Mount (Wall Wash) Model: Source: Fixture Set Back: Fixture Spacing: Reflectances: (3) CV with acrylic lens cover, 3. diameter 48" length 1FS54 (54w T-5/HO, mini bi-pin base) 3' 8' INDOOR 14 ft. 9 ft ft. 8 ft. 2.5 ft. Horizontal Illuminance on Ceiling ft Horizontal Illuminance 2.5 ft. Above Floor ft. Vertical Illuminance on Wall ft WALL / CEILING Continuous Row Mounting - CR3000 Series Specifying continuous row mount adds several elements to the catalog number: Continuous Row Nominal Length (CR), Number of Fixtures and Power Feed. For mixed luminaire continuous row, include the positions of each luminaire within the row. See examples below. Rows using same model number Establish the total nominal length of the finished assembly, choose the fixtures and create a summary. All fixtures are assumed to be of the same color, stem offset, and option configuration. For all complex configurations, contact your local Visa representative. Order Code Example - Same model numbers ft. 12 ft. CR3000(48) - CV FS STW(8) - PFIR - TW Continuous Row Model-Length Source Number of Mounting Power Feed Finish Option (total length) (Voltage) Fixtures Rows using combined model numbers Establish the total nominal length of the finished assembly, choose the fixtures and create a summary. All fixtures are assumed to be of the same color, stem offset, and option configuration. For all complex configurations, contact your local Visa representative. Order Code Example - Combined model numbers CR3000(74) / CV FS14-1,3 / CV FS21-2 / - RFT/2 - TW Continuous Row Model-Length Source Position(s) Model-Length Source Position(s) Mounting Power Feed Finish Option (total length) (Voltage) (Voltage) 8 ft. LED ADA Power Feed Stem Mount EPFL End Power Feed (left) EPFR End Power Feed (right) PFIR Power Feed in row Bracket Mount IPF Separate power feed for each fixture RFT/# One power feed (indicate feed point position # - all other fixtures in row feed through)

7 FINISHES AND Specify color code when ordering. Painted Finishes (standard) Individual paint and finish samples are available upon request. For additional information see VisaLighting.com/material-finishes Acrylic Powder Coat TW9016 Traffic White (RAL9016) VisaLighting.com MATERIALS CW9001 Cream (RAL9001) GW9002 Grey White (RAL9002) JB9005 Jet Black AG7038 Agate Grey (RAL9005) (RAL7038) HTHR Heather CVBL Cove Blue Polyester Powder Coat BSIL Blade Silver GSIL Graphite Silver GLIM Glimmer SUNG Sungold BRNZ Bronze OBRZ Old Bronze BMAT Bronze Matte PB1035 Pearl Beige (RAL1035) For accurate metal matching use BHMA standard or request finish samples. Metal Finishes (premium options) Individual paint and finish samples are available upon request. For additional information see VisaLighting.com/material-finishes BA Brushed Aluminum BB Brushed Brass (BHMA606) BBA Brushed Brass CB Polished Chrome (BHMA625) CUA Brushed Copper BCA Brushed Chrome BCB Brushed Chrome (BHMA6) BSS Brushed Stainless Steel (BHMA630) GFA Grinder Finished Aluminum RUST Rust OBA Oil-Rubbed Bronze PB Polished Brass (BHMA605) PRA Pewter SN Satin Nickel SNA Satin Nickel VG Verdigris Patina over Copper (BHMA619) BU Brushed Copper BZ Brushed Bronze (BHMA612) BZA Brushed Bronze PSS Polished Stainless Steel (BHMA629) RBA Rustic Brass SF Brushed Textured Stainless Steel Other Materials (premium options) Wood CW Cherry Wood NM Natural Mahogany Alabaster WB White Birch ABA Hand-Painted Alabaster Glass GD Opal White Glass Colored Acrylic PGD Patterned Glass Diffuser GIA Glacier Ice Acrylic OKA Orange Krush Acrylic OLIN Oyster Linen Acrylic SL Silver Spun CCG Clear Crushed Glass Lumicor AR Arctic Crush PP Paper Leaf BCG Blue Crushed Glass TT Tiger Taipei WMA White Mist Acrylic