OFFICE 7 4/ SF TLT JAN 9 1/ 1 18 SF TLT 43 SF OFFICE CLASSROOM 10/ SF 35/ SF ASSEMBLY / SF 10/12/2018

Transcription

1 Issue ate MRK TE Y ESRIPTION NS RHITETS, P RHITETURE / PLNNING / INTERIORS TE ESIGNE RWN HEKE 700 South Quincy Street, Suite 00 rlington, V 06 (70) South 1th Street, Suite 0 Richmond, V 19 (80) hurch venue SW Roanoke, V 011 (0) Executive oulevard, Suite 00 hesapeake, V 0 (77) Research ourt, Suite 0 Rockville, M 080 (0) VIINITY MP STRUTURL ENGINEER OWNER ESRIPTION LOTION MP RHITETS, P 8 hurch ve SW Y & KINER ONSULTING ENGINEERS 6 rambleton ve, Suite Roanoke, V 018 P:(0) F:(0) ouglas ve NW P: (0) 8-0 Vision panels and swing gates will be added to the perimeter of the courtyard. This will create a more secure passageway between the facilities and deter unwanted wandering pedestrian traffic from the neighborhood around the cademy. Fencing will have privacy panels to obscure the view from the street and parking areas. Gates will be equipped with exit devices to allow free egress in an emergency and will be alarmed. SITE SITE 11:7:19 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt Sheet Number INEX TITLE T-001 TITLE LIFE SFETY LS101 Sheet Title UILING LIFE SFETY PLN TRUE NORTH RHITETURL -001 GENERL INFORMTION, NOTES, N SPEIFITIONS -101 OVERLL EXISTING PLN -10 OVERLL NEW WORK PLN -10 PRTIL PLNS -00 ELEVTIONS -01 WLL SETIONS -01 ENLRGE PLNS -0 ENLRGE PLNS -01 ETILS -0 ETILS -601 GTE ELEVTIONS 1 TRUE NORTH RWING 0 ouglas ve NW TITLE T-001

2 ELE 1 SF KITHEN 17 / SF LIRRY 1 18/ SF STORGE 18 1/ SF 1 (90' - ) OFFIE 1 / SF ONF 1 10/ SF 10 TLT 0 SF TLT SF 1 JN 9 1/ 1 18 SF OFFIE 7 / 6 SF TLT SF 107 LSSROOM / 68 SF LSSROOM / 686 SF (10' - 0") LSSROOM 1 / 68 SF Issue ate TE NS ESIGNE RWN MRK TE Y ESRIPTION NS HEKE N OFFIE 10 10/ SF LSSROOM 6 / 686 SF LSSROOM / 690 SF LSSROOM / 686 SF RHITETS, P 8 hurch ve SW SSEMLY 19 / 8 SF 11:7:19 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt TLT 77 SF STGE 0 / 66 SF TIVITY ROOM 1 8/ SF UILING LIFE SFETY PLN SLE: 1 STORGE 1/ 1 77 SF PLN LEGEN 8/6 0 ESIGN OUPNY OE OUPNY EGRESS PITY IN PERSONS FOR OPENING SHOWN LULTE OUPNY LO T EXIT LOTION (-' - -") XXX XXX SF 1 PPROXIMTE MXIMUM TRVEL ISTNE OUPNT LO RWING 0 ouglas ve NW UILING LIFE SFETY PLN LS101

3 11:6:8 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt SETION OOR HRWRE PRT 1 - GENERL 1.1 SUMMRY:. Section Includes: Finish Hardware for door openings, except as otherwise specified herein. 1. oor hardware for steel gates.. Keyed cylinders as indicated.. Related Sections: 1. ivision 6: Rough arpentry.. ivision 8: Electronic Security. References: omply with applicable requirements of the following standards. Where these standards conflict with other specific requirements, the most restrictive shall govern. 1. uilders Hardware Manufacturing ssociation (HM). NFP 101 Life Safety ode. NFP 80 -Fire oors and Windows. NSI-16.xx- Various Performance Standards for Finish Hardware. UL10 Positive Pressure Fire Test of oor ssemblies 6. NSI ccessible and Usable uildings and Facilities 7. HI /NSI 11.IG Installation Guide for oors and Hardware 8. I International uilding ode. Intent of Hardware Groups 1. Should items of hardware not definitely specified be required for completion of the Work, furnish such items of type and quality comparable to adjacent hardware and appropriate for service required.. Where items of hardware aren t definitely or correctly specified, are required for completion of the Work, a written statement of such omission, error, or other discrepancy to be submitted to rchitect, prior to date specified for receipt of bids for clarification by addendum; or, furnish such items in the type and quality established by this specification, and appropriate to the service intended. 1. WRRNTY:. Refer to onditions of the ontract. Manufacturer s Warranty: 1. Exit evices: Five Years. ylinders: Three years. ll other Hardware: One year. 1. OWNER S INSTRUTION:. Instruct Owner s personnel in operation and maintenance of hardware units. 1. MINTENNE:. Extra Service Materials: eliver to Owner extra materials from same production run as products installed. Package products with protective covering and identify with descriptive labels. omply with ivision 1 loseout Submittals Section. 1. Special Tools: Provide special wrenches and tools applicable to each different or special hardware component.. Maintenance Tools: Provide maintenance tools and accessories supplied by hardware component manufacturer.. elivery, Storage and Protection: omply with Owner s requirements for delivery, storage and protection of extra service materials.. Maintenance Service: Submit for Owner s consideration maintenance service agreement for electronic products installed. PRT - PROUTS.1 MNUFTURERS:. The following manufacturers are approved subject to compliance with requirements of the ontract ocuments. pproval of manufacturers other than those listed shall be in accordance with ivision 1. Item: Manufacturer: pproved: Gate Hinges/losers & Technologies ylinders est No Substitute (Facility Standard) Exit evices etex Weatherized evices ccess ontrol System K E-PLEX No Substitute (Facility Standard). MTERILS:. Exit evices shall: 1. Tested and approved by HM for NSI 16., Grade 1. Furnish UL or recognized independent laboratory certified mechanical operational testing.. Touchpad shall be T style. Exposed components shall be of architectural metals and finishes.. Lever design shall match lockset lever design 6. Provide strikes as required by application. 7. Fire exit devices to be listed for UL10 8. UL listed for ccident Hazard 9. Shall consist of a cross bar or push pad, the actuating portion of which extends across, shall not be less than one half the width of the door leaf. 10. Exit evice shall be designed and warranted for full exposure to the weather elements and temperature extremes.. ylinders: 1. Provide the necessary cylinder housings, collars, rings & springs as recommended by the manufacturer for proper installation.. Provide the proper cylinder cams or tail piece as required to operate all locksets and other keyed hardware items listed in the hardware sets.. oordinate and provide as required for related sections.. KEYS N KEYING:. Provide keyed brass construction cores and keys during the construction period. onstruction control and operating keys and core shall not be part of the Owner's permanent keying system or furnished in the same keyway (or key section) as the Owner's permanent keying system. Permanent cores and keys (prepared according to the accepted keying schedule) will be furnished to the Owner.. ylinders, removable and interchangeable core system: est Standard 7-pin.. Permanent keys and cores: Stamped with the applicable key mark for identification. These visual key control marks or codes will not include the actual key cuts. Permanent keys will also be stamped "o Not uplicate.". Transmit Grand Masterkeys, Masterkeys and other Security keys to Owner by Registered Mail, return receipt requested. E. Furnish keys in the following quantities: 1. 1 each Grand Masterkeys. each Masterkeys. each hange keys each keyed core. 1 each onstruction masterkeys. 1 each ontrol keys F. The Owner, or the Owner's agent, will install permanent cores and return the construction cores to the Hardware Supplier. onstruction cores and keys remain the property of the Hardware Supplier. G. Keying Schedule: rrange for a keying meeting, and programming meeting with rchitect Owner and hardware supplier, and other involved parties to ensure locksets and locking hardware, are functionally correct and keying and programming complies with project requirements. Furnish typed copies of keying and programming schedule to rchitect. PRT - EXEUTION.1 EXMINTION. Verification of conditions: Examine doors, frames, related items and conditions under which Work is to be performed and identify conditions detrimental to proper and or timely completion. 1. o not proceed until unsatisfactory conditions have been corrected.. HRWRE LOTIONS:. Mount hardware units at heights indicated in the following publications except as specifically indicated or required to comply with the governing regulations. 1. Recommended Locations for uilder s Hardware for Standard Steel oors and Frames, by the oor and Hardware Institute (HI).. Recommended locations for rchitectural Hardware for flush wood doors (HI).. INSTLLTION:. Install each hardware item per manufacturer's instructions and recommendations. o not install surface mounted items until finishes have been completed on the substrate. Set units level, plumb and true to line and location. djust and reinforce the attachment substrate as necessary for proper installation and operation.. onform to local governing agency security ordinance.. Install onforming to I/NSI ccessible and Usable uilding and Facilities.. Installed hardware using the manufacturers fasteners provided. rill and tap all screw holes located in metallic materials. o not use Riv-Nuts or similar products.. FIEL QULITY ONTROL N FINL JUSTMENT. ontractor/installers, Field Services: fter installation is complete, contractor shall inspect the completed door openings on site to verify installation of hardware is complete and properly adjusted, in accordance with both the ontract ocuments and final shop drawings. 1. heck and adjust closers to ensure proper operation.. heck to confirm exit devices are properly installed and adjusted to ensure proper operation. a. Verify levers are free from binding. b. Ensure latchbolts are engaged into strike and hardware is functioning.. Report findings, in writing, to architect indicating that all hardware is installed and functioning properly. Include recommendations outlining corrective actions for improperly functioning hardware if required.. SHEULE OF FINISH HRWRE: Option List ode W L KEYWY - escription Weatherized Less ogging Keyway (Specify) Finish List ode escription 66 Satin hromium Plated 60 Satin Stainless Steel GRN Green 60,66 Satin Stainless x Satin hrome Manufacturer List ode Name E est ccess Systems &T & Technologies E etex K K Hardware Sets SET #01 oors: 1,,, 6 Surelose H Gate Hinge/loser 7108m x 7 x Flush Mtd. x Snap ction 66 &T 1 Weatherized Rim Exit evice 10 x W x L x 99 x Exit Only 60 E NOTE: oordinate the hinge/closer and exit device with the gate manufacturer. Gate stop to be furnished by the gate manufacturer. Free egress at all times. No entry from exterior. SET #0 oors: 1,, 6 Surelose H Gate Hinge/loser 7108m x 7 x Flush Mtd. x Snap ction 66 &T 1 Weatherized Rim Exit evice 10 x W x L x 99 x coordinate with E-PLEX 60 E 1 E-Plex Exit Trim E710 WL 66 K 1 ore 1-7_ x Keyway as Required 66 E 1 onstruction ore 1-7 x onstruction ore GRN E NOTE: oordinate the hinge/closer and exit device with the gate manufacturer. Gate stop to be furnished by the gate manufacturer. Install a bead of clear silicone caulk around the E-PLEX trim and gate surface for added weather resistance. Free egress at all times. Presentation of a valid card/pin unlocks the outside lever for ingress. Outside key override is available for ingress if needed. SET #0 oors:,,, 7 Surelose H Gate Hinge/loser 7108m x 7 x Flush Mtd. x Snap ction 66 &T 1 Weatherized Rim Exit evice 10 x 09S Trim x W x L x 99 60,66 E 1 onstruction ore 1-7 x onstruction ore GRN E 1 Mortise ylinder 1E-7 x ST x blocking ring/cam as req. 66 E NOTE: oordinate the hinge/closer and exit device with the gate manufacturer. Gate stop to be furnished by the gate manufacturer. Free egress at all times. Outside lever trim is locked at all times. Ingress by key only. EN OF SETION OOR HRWRE SETION PINTING PRT 1 - GENERL 1.1 SUMMRY:. Paint systems shall be submitted by MPI numbers complying with the specified systems indicated for the project. Non-numbered products and submittals will be returned as not acceptable. PRT - PROUTS:.1 MTERILS:. Provide poducts that comply with MPI standards indicated and that are listed in the latest edition of the "MPI pproved Products List.". Products shall comply with VO limits of authorities having jurisdiction.. olors to be selected by the Owner from the full range of colors available from the manufacturer for the paint systems selected.. Unless otherwise noted, all painting work shall be in accordance with MPI Premium Grade finish requirements. E. Steel Substrates, Exterior: 1. Epoxy oating System: a. Prime oat: Epoxy, anti-corrosive for metal, MPI #101. b. Intermediate oat: Same as topcoat. c. Topcoat: High build epoxy, gloss, MPI #98. PRT - EXEUTION:.1 ONITION OF SURFES:. arefully examine the work of other trades; do not proceed until satisfied that materials are in the proper condition for painting.. lean surfaces to be painted before applying paint or surface treatments. ll surfaces shall be clean, dry and smooth.. etermine moisture content of surfaces to be painted by appropriate tests. o not paint over surfaces with moisture content of more than 1%.. PREPRTION OF SURFES:. Steel: Remove grease, rust and scale by wire brushing or sand blasting as necessary. Replace any primer or galvaninzing removed by this operation.. Plaster: Fill all holes and cracks; do not use sandpaper unless directed by Owner.. Existing Wood: Remove any defective or loose finish to bare wood. Sand surrounding areas and normally bonded finish to a sound, smooth, clean condition.. Existing Ferrous Metal: Remove any defective or loose finish to bare metal. Wire brush any rusted areas until all rust is removed. Prime base metal immediately with suitable metal primer. E. Existing Plaster, Gypsum oard and oncrete Masonry Units: Prepare same as for existing wood except do not sand.. PROTETION:. Remove all hardware, plates, fixtures and similar items in place and not to be painted, or provide adequate surface applied protection. Store securely. Such items shall be properly reinstalled by workers skilled in the trades involved.. PPLITION:. Spray painting will be permitted wherever practical; however, excess thinning will not be permitted and complete surface coverage shall be equal to that of first class brush work. o not spray paint concrete block unless it is immediately back-rolled.. o all touch-up and clean-up at the completion of this work to leave all surfaces in a finished condition.. Unless otherwise noted in the ontract ocuments, all exposed surfaces on the project shall be painted.. Notwithstanding any of the products specified, the painting contractor shall furnish paints and painting products that are in compliance with all Federal, State and Local environmental laws and regulations that are in effect in the location of the project at the time of installation, including the regulations of the Ozone Transport ommission (OT). ll such changes in the products shall be so noted on the submittals made under Paragraph 1.0 herein.. LENING UP:. t completion of painting work, remove all empty paint containers and other trash resulting from this work from the job site. Remove all paint spatters from all surfaces. Leave in first class condition.. ll partial cans of paint left at completion of the painting work shall be removed from the job site. EN OF SETION PINTING 101 LX X X X XXX XX XX OOR TG - UILING IV/OOR NUMER LOTION SUFFIX (IF REQ') LOUVER E NEW WORK KEY NOTE EMOLITION KEY NOTE EXTERIOR / INTERIOR / INTERIOR SEWORK ELEVTION IENTIFITION NUMER NUMER WHERE ELEVTION IS LOTE SIGNGE E SIGNGE NO. RH NO RHITETURL GRPHI SYMOLS ROOM 101 XX XX W XX HM XX SF ROOM NME LG IV / ONST NO. WINOW E UILING SETION REFERENE WINOW FRME ES (REF 600 SERIES RWINGS) STOREFRONT SETION NUMER RWING NUMER WHERE SETION IS RWN SETION REFERENE URTIN WLL ES (REF 600 SERIES RWINGS) URTIN WLL HOLLOW METL FRME ES (REF 600 SERIES RWINGS) HOLLOW METL FRME SETION NUMER RWING NUMER WHERE SETION IS RWN ENLRGE PLN OR ETIL REFERENE PLN OR ETIL NUMER RWING NUMER WHERE ENLRGE PLN OR ETIL IS RWN GENERL EMOLITION NOTES (LL S) 1. LL EMOLITION WORK SHLL E RRIE OUT IN MNNER TO PROTET JENT SURFES WHIH REMIN IN PLE, PRTIULRLY FINISH SURFES WHIH WILL REMIN EXPOSE IN THE OMPLETE WORK. NY MGE SHLL E REPIRE TO MTH SURROUNING WORK.. LL EXISTING WLLS, EILINGS, FLOORS, SUSTRTES, SIEWLKS, N OTHER SURFES WHIH WILL REMIN EXPOSE IN THE FINISHE WORK N WHIH RE SOILE OR MGE SHLL E PTHE S REQUIRE TO MTH JENT SURFE. SUH SURFES WHIH RE OTE WITH EXISTING PINT SHLL E REPINTE WITH SUFFIIENT OTS OF PINT TO OMPLETELY HIE THE PTHING WORK. GENERL NEW WORK NOTES (LL S) 1. LL EXISTING IMENSIONS, NGLES, N ONITIONS THROUGHOUT THE RE TO E VERIFIE Y THE ONTRTOR T THE JO SITE IN ORER TO VOI NY ONFLITS N INTERFERENES URING ONSTRUTION. PRIOR TO EGINNING NEW ONSTRUTION, VERIFY THT LL EXISTING UILING ORNERS RE SQURE N PERPENIULR SO THT NEW ONSTRUTION WILL FIT INTO EXISTING S SHOWN N ETILE, N VERIFY THT LL EXISTING UILING IMENSIONS RE SHOWN ORRETLY PRIOR TO INSTLLTION OF NEW WORK.. ORRUGTE METL PNELS (MP) SHLL E FTORY FORME, PREFINISHE, GUGE STEEL WITH EEP ORRUGTIONS, EXPOSE FSTENERS, N MTHING METL Y PETERSON LUMINUM ORPORTION OR PPROVE EQUL.. OLORS SHLL E HOSEN FROM MNUFTURERS STNR OLORS.. LL MNUFTURER'S REOMMENE FSTENERS, WSHERS, N OTHER ESSORIES SHLL E PROVIE FOR OMPLETE N PROPER INSTLLTION.. LL FSTENERS SHLL E INSTLLE IN MNNER THT OES NOT LEVE SHRP EGES IRETLY EXPOSE IN THE FINISHE WORK.. INSTLLTION OF THE PNELS N LL ESSORIES SHLL OMPLY WITH MNUFTURER'S REOMMENTIONS.. STUTURL STEEL:. LL STRUTURL STEEL SHLL E ESIGNE, FRITE, N ERETE IN ORNE WITH THE LSTEST SPEIFITIONS OF THE MERIN INSTITUTE OF STEEL ONSTRUTION.. HSS SETIONS SHLL OMPLY WITH STM 00 GRE.. LL OTHER STRUTURL STEEL SHPES SHLL OMPLY WITH STM 7 GRE 0 OR STM 99 GRE 0.. STEEL ELOW GRE SHLL E OTE WITH HEVY ONSTRUTION GRE MSTI MTERILS. E. LL WELS SHLL E ONE IN ORNE WITH WS 1.1 "STRUTURL WELING OE - STEEL." F. LL WELS ON SURFES WHIH WILL E EXPOSE IN THE OMPLETE WORK SHLL E SMOOTH N EVEN, FREE FROM PULING, PITTING, N OTHER UNEVENNESS. LL SLG N WEL SPLTTER SHLL E REMOVE. WELS IN INTERNL ORNERS SHLL E GROUN OR FILE S REQUIRE TO SMOOTH, EVEN OVE LL SIES.. LL METL STUS SHLL E FORME FROM HOT-IPPE GLVNIZE STEEL, STM 6 WITH MINIMUM G-60 OTING, GRE, WITH MINIMUM YIEL STRENGTH OF KSI. GLVNIZE FINISH OF LL ESSORY MEMERS SHLL MTH THT OF THE MIN FRMING OMPONENTS.. LL ONRETE WORK SHLL ONFORM TO THE LTEST EITION OF THE MERIN ONRETE INSTITUTE (I) 01, 1, 18, N LL UILING OE REQUIREMENTS. LL ONRETE IS NORML WEIGHT ONRETE. 6. LL STEEL SHLL REEIVE FINISHES IN ORNE WITH SPEIFITION SETION TITLE SLE: 1 MIN RWING TITLE TITLE MTH LINE SEE 1 / SLE: R101 ELEVTION REFERENE EXISTING OLUMN NEW OLUMN ORRUGTE METL PNEL RWING TITLE RWING SLE RWING TITLE WITH REFERENE SYMOL RWING NUMER ESIGNTION RWING TITLE RWING REFERENE NUMER RWING SLE RWING NUMER Issue ate TE NS ESIGNE TE Y ESRIPTION MRK NS RWN RWING HEKE RHITETS, P 8 hurch ve SW 0 ouglas ve NW -001 NS GENERL INFORMTION, NOTES, N SPEIFITIONS

4 TE Y ESRIPTION MRK TE ESIGNE RWN HEKE RHITETS, P 8 hurch ve SW E 11:6:8 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt Issue ate hecker OVERLL EXISTING PLN SLE: = 0'-0" 1 TRUE NORTH PLN NORTH RWING 0 ouglas ve NW OVERLL EXISTING PLN -101

5 TE Y ESRIPTION MRK TE ESIGNE RWN HEKE Issue ate NS GTE 7 GTE 1 W/ ESS ONTROL 1-10 RHITETS, P 8 hurch ve SW E GTE 1-10 GTE 11:6:0 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt GTE 6 W/ ESS ONTROL OVERLL NEW WORK PLN SLE: = 0'-0" GTE GTE W/ ESS ONTROL TRUE NORTH PLN NORTH RWING 0 ouglas ve NW OVERLL NEW WORK PLN -10

6 KEY NOTES 1 (PPLIES TO THIS ) REMOVE INTERIOR EXIT EVIE, STRIKE, LOSER, N EXTERIOR OOR HNLE HRWRE FROM EXISTING OOR LEF. PTH LL HOLES TO E FLUSH WITH EXISTING OOR SURFE. SEURE LEF IN LOSE POSITION WITH FSTENERS. PINT ENTIRE OOR SURFE TO MTH EXISTING. HSS "x"x/1. WHERE OURS T EXISTING SIEWLK, UT ONRETE S REQUIRE TO INSTLL FOOTING N S ETILE. PTH SIEWLK WITH NEW MTERILS TO MTH EXISTING. PREPRE EXISTING OLUMNS S REQUIRE TO REEIVE NEW HSS HORIZONTL MEMERS, ORRUGTE METL PNELS, N/OR GTE N HRWRE. FTER INSTLLTION, PINT ENTIRE OLUMN TO MTH EXISTING. ORRUGTE METL PNELS ON () HSS "x"x/1 HORIZONTL MEMERS. HORIZONTL MEMERS N PNLES E MOUNTE ON LTERNTING SIES OF S PER PLN. SEE /-01 FOR IL HORIZONTL MEMER TO ONNETION ETIL. ORRUGTE METL PNELS ON () ONTINUOUS HSS "x"x/1 HORIZONTL MEMERS. SEE /-01 FOR SIMILR HORIZONTL MEMER TO ONNETION ETIL. 10' - " OLOR 7' - " ' - 0" OLOR 1-00 Issue ate TE ESIGNE RWN MRK TE Y ESRIPTION NS HEKE 11' NOTE: UNLESS OTHERWISE NOTE (UON), ORRUGTE METL PNELS SHLL E OLOR. VERIFY OLOR SELETIONS WITH OWNER. OLOR SHLL FE THE EXTERIOR. OLOR 1: PTIN GREEN OLOR : MILITRY LUE OLOR : HEMLOK GREEN OLOR : ERKSHIRE LUE RHITETS, P 8 hurch ve SW NOPY OVE 11:6:1 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt ' - 8" ' - " OLOR 7' - OLOR OLOR OLOR 1 1/" 6 1/" /" 9' - " OLOR 1 PRTIL PLN 1-10 SLE: 1 PRTIL PLN -10 SLE: " 9' - " OLOR 1 " /" 1/" 9' - " OLOR 9' - " OLOR /" -01 7' - 10" ' - " ' - " " 7' - 8" OLOR ' - 8" 9' - " OLOR " /8" /8" 9' - " OLOR 9' - " OLOR /8" /8" 1' - 0 /8" 8' - 7 1/" 9' - " 9' - " 9' - " 9' - " 9' - " OLOR 1 OLOR OLOR 1 OLOR OLOR 1 /8" /8" 9' - " OLOR /" 1/" 1/" 1/" 9' - " OLOR /" ' - OLOR /" 18' - 1/" 9' - " OLOR 8 1/" 8 1/" 8 1/" 8 /" 8 /" 9' - " OLOR 8" 8" 1-01 ' - " OF ' - " 6 6 ' - /" 6' - " 6' - 0" 6' - " PRTIL PLN -10 SLE: ± 6' /8" 8' - 0 1/" ' - 10" 9 7/1 6' - 10" 6' - 8" 6' - 8" 1' - 0" 18' - 9 /8" 1' - " ' - 1 /" ' - " 1 18' - " 0' - /" ' - 7" RWING 0 ouglas ve NW PRTIL PLNS -10

7 ± EXIST "x"x/1 STL TUE, ' - 8" ' - " ' - 1' - " " UILING FF EL +-1' - 1/" R ' /" EXIST NOPY -01 1' - 7 /" 7' /" 8' - 8' - 0 1/" 8' - 0 /8" 7' - 11 /" 8' - 0 1/" 8' - 0 1/" 7' - 10" 7' - 7' - 7' - 7' - 1/" 7' - 7" R 16' - 6 1/" R 16' - /" R 16' - /" GTE R 16' - " HSS "x"x/1 R 16' - " R 16' - /" R 16' - 1 /" R 16' - " R 16' - /" R 16' - " R 16' - /" GTE 1 R 1' - 7" HSS "x"x/1 R 1' - 1/" R 1' - /" 1-01 R 1' - 1/" R 1' - 1 /" R 1' - 7 1/" EXIST NOPY EXIST ORRUGTE MTL PNELS ON HSS xx/1 HORIZONTLS UILING FF EL +0' - 0" TE Y ESRIPTION MRK ELEVTION 1-00 SLE: /1 Issue ate NS -01 EXIST -01 HSS "x"x/1-01 EXIST NOPY EXIST TE ESIGNE RWN HEKE ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS HSS "x"x/1 ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS ELEVTION 1-00 SLE: UILING FF EL +-' - 9 1/" UILING FF EL +-' - 1/" ELEVTION -00 SLE: GTE UILING FF EL +-' - 9 1/" UILING FF EL +-' - 1/" RHITETS, P 8 hurch ve SW 11:6:9 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt ELEVTION 1-00 SLE: 6' - 10" " ' - 8" ELEVTION 1-00 SLE: /1-01 ± 7' - " ' - 0" GTE EXIST NOPY EXIST -01 ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS 7' - " EXIST MSONRY ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS UILING FF EL +-1' - 1/" UILING FF EL +-' - 9 1/" HSS "x"x/1-01 ELEVTION -00 SLE: GTE 6 ELEVTION -00 SLE: EXIST NOPY EXIST FORME RKE ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS UILING FF EL +0' - 0" HSS "x"x/1 ' - 7 1/" 8' - 0 1/" -01 ELEVTION -00 SLE: -01 GTE 7 EXIST NOPY EXIST EXIST NOPY EXIST ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS UILING E FF EL +-6' - 0" ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS HSS "x"x/1 UILING E FF EL +-6' - 0" -01 7' - ELEVTION -00 SLE: GTE ELEVTION -00 SLE: 1-01 HSS "x"x/1 EXIST MSONRY ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS HSS "x"x/1 UILING FF EL +-' - 1/" EXIST NOPY EXIST ORRUGTE MTL PNELS ON ONT HSS xx/1 HORIZONTLS UILING FF EL +-1' - 1/" RWING 0 ouglas ve NW ELEVTIONS -00

8 " -0 " FORME RKE MTL HSS x"x/1 GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS -0 1/" MP " EXIST NOPY & FRMING -0 FORME RKE EXIST FSTENER, FSTENER, FORME RKE HSS "x"x/1 FSTENER, TE Y ESRIPTION MRK 7' - HIGHEST PEK ' - 10 /" ' - 0 1/" FSTENER, MP FSTENER, EXIST EYON HSS "x"x/1 () W/ 1/" LOSURE PLTE EYON, ± 7' - " LIGN W/ TOP OF MULLION OVER OORS /" EXTERIOR PLYWOO SHETHING MTL 1 O MX HSS "x"x/1 () FSTENER, HSS "x"x/1 () FSTENER, EXIST OR HSS "x"x/1 () FSTENER, HSS "x"x/1 () FSTENER, Issue ate TE ESIGNE RWN NS HEKE RHITETS, P 8 hurch ve SW FSTENER, MP MP -0 " FORME RKE MTL, E SIE EXIST ON SIEWLK -0 1 O MX EXIST ON SIEWLK -0 FORME RKE MTL EXIST ON SIEWLK FORME RKE MTL EXIST ON SIEWLK " 11:7:0 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt GTE SETION 1-01 SLE: FENE P ETIL - ELEVTION 1-01 SLE: 1 WLL SETION - GYP & MTL STUS -01 SLE: 1-00 EXIST NOPY EXIST ROLLE TOP, SEE ELEVS FOR RIUS HSS "x"x/1 () MP FORME RKE EXIST ON SIEWLK WLL SETION - MTL TUE - OULE SIE -01 SLE: 1-00 " RKE MTL - TOP ORNER (IL) -01 SLE: " WLL SETION - MTL TUE -SINGLE SIE -01 SLE: 1 ROLLE TOP, SEE ELEVS FOR RIUS FORME RKE MP " MP FORME RKE EXIST ON SIEWLK RKE MTL - OTTOM ORNER (IL) -01 SLE: 1 " RWING 0 ouglas ve NW WLL SETIONS -01

9 11:7:08 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt 8' - " " ' - 8" GTE 1-0 EXIST " ' - 8" " 7' GTE ' - 0" GTE ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS HSS "x"x/1 ORRUGTE MTL PNELS ON HSS "x"x/1 HORIZONTLS EXIST HSS "x"x/1 ' - 8" -601 ENLRGE PLN - SEVENTH GTE 1-01 SLE: ENLRGE PLN - THIR GTE 1-01 SLE: ± 7' - " ' - " 7' - 8" " ' - " " 7' - 8" ' - 8" ' - 0" GTE ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS HSS "x"x/1, -01 ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS -01 ENLRGE PLN - FOURTH GTE -01 SLE: 1-01 ORRUGTE MTL PNELS ON HSS "x"x/1 HORIZONTLS ' - " ' - 8" " GTE -601 ' - " -01 ' - 8" GTE ENLRGE PLN - SEON GTE -01 SLE: " 1-00 X6 MTL TUE FRMING HSS "x"x/ ' - 10" -01 ' - ' - 1 EQ EQ ENLRGE PLN -01 SLE: ' - 7" " GTE ' - 7" GTE HSS "x"x/1 1 ENLRGE PLN - FIRST GTE -01 SLE: 6 ORRUGTE MTL PNELS ON HSS "x"x/1 HORIZONTLS 1-01 X6 MTL TUE FRMING HSS "x"x/1 1-0 ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS ' - 7 1/" EXIST, EXIST -01 8' - 0 1/" 1' - 0 /8" ' ' - 0" 0.00 ' - 0" ENLRGE PLN - ENTRNE -01 SLE: /" ± ' - 0" VOI OOR LITE -0 Issue ate TE ESIGNE TE Y ESRIPTION MRK RWN RWING HEKE RHITETS, P 8 hurch ve SW 0 ouglas ve NW ENLRGE PLNS -01 NS

10 TE Y ESRIPTION MRK NEW "x"x/1 HSS EXIST 1-0 " 7" ± ' - 7 /" ' - " ± ' - 7" ' - 0" GTE EXIST " -01 Issue ate TE ESIGNE RWN NS HEKE 11:7:09 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt " " ENLRGE PLN - RMP 1-0 SLE: ' - " NEW "x"x/1 HSS, 6' - 0" 6' - 0" 6' - 0" ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS 6' - 8" 6' - 8" 6' - 8" ± 1' - 0" " ORRUGTE MTL PNELS ON ONT HSS "x"x/1 HORIZONTLS 1 RHITETS, P 8 hurch ve SW 0 ouglas ve NW ENLRGE PLNS RWING -0

11 1/" LOSURE PLTE, FSTENER, HSS "x"x/1 () MP " " " EXIST HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS MP " " " HSS "x"x/1 HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS FSTENER, MP FORME RKE MRK TE Y ESRIPTION GTE JM - LINER (IL) 1-01 SLE: " " FORME RKE FSTENER, FORME RKE -601 " SINGLE GTE LOK (IL) -01 SLE: Issue ate TE ESIGNE RWN NS HEKE MP " " " " FSTENER, 1/" LOSURE PLTE, HSS "x"x/1 () EXIST HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS " /" 1 /" 1 /" /" " " HSS "x"x/1 HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS FSTENER, MP RHITETS, P 8 hurch ve SW " FSTENER, MP /" " 1/" " /" FORME RKE GTE JM (IL) 1-01 SLE: FORME RKE OULE GTE LOK (IL) -01 SLE: 11:7:10 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt HSS "x"x/1 1/" LOSURE PLTE, FORME RKE MP HSS "x"x/1, /" " RKE MTL - SIE (IL) 1-01 SLE: = 1'-0" FORME RKE ORRUGTE PNEL OVERLP (IL) 1-01 SLE: " ' - /" MP OVERLL WITH, MP 1' - 0" MX /16 " /16 " 1' - 0" MX FSTENER, OMFIRM SPING W/ PNEL MNUFTURER MP G STL PNEL NEW OR EXISTING HSS "x"x/1, HSS "x"x/1 LLV, 1/" LOSURE PLTE, MP G STL PNEL HORIZONTL TO ONNETION (IL) -01 SLE: ' - /" ' - /" MP OVERLL WITH, MP OVERLL WITH, 9' - " GIRT OVERLL WITH, EXISTING UILING REK MTL EGE P /16 " ORRUGTE MTL PNEL HSS "x"x/1 () 1/" HSS "x"x/1 () HERE W/ HILTI HY 70 OR PPROVE EQUL. PROVIE SREEN TUES S REQUIRE. 1/" LL THRE ROS T 1 O Lxx1/" - REST ON ON ELOW, SIEWLK OR T.O. FOOTING, 7'-0" OVE GRE OR SIEWLK ONNETION T WLL (IL) -01 SLE: HSS "x"x/1, 1 ' - 0" UON " LR " LR -01 SLE: FORME RKE 1/" P PLTE HSS "x"x/1 PROVIE POSITIVE RINGE WY FROM FIN GRE OR SIEWLK '-0" I ONRETE ISSON REINF. WITH 8 # VERTILS N # O NEW ELEVTION (IL) RWING 0 ouglas ve NW ETILS -01

12 " " " " " " FORME RKE FSTENER, MP 1/" LOSURE PLTE HSS "x"x/1 () FORME RKE FSTENER, EXIST MP HSS "x"x/1 () HSS "x"x/1 MP 1/" LOSURE PLTE HSS "x"x/1 () FSTENER, FORME RKE " " FSTENER FORME RKE MTL MP, E SIE /" PLYWOO SHETING, E SIE " ONT OX HEER MTL 1 O MX /" /" " FSTENER FORME RKE MTL MP /" " Issue ate TE ESIGNE RWN MRK TE Y ESRIPTION NS HEKE ORNER ETIL 1-0 SLE: OUTSIE ORNER -0 SLE: RKE MTL ON GW - TOP -0 SLE: RKE MTL - TOP (IL) -0 SLE: = 1'-0" EXISTING OWNSPOUT EXIST 1'-0" MX 1/" LOSURE PLTE FSTENER, HSS "x"x/1 () EXIST /" PLYWOO SHETING, E SIE MP, E SIE MTL 1 O MX FSTENER, E SIE 1 O MX FORME RKE MTL E SIE, 1/" I " O " /" /" " MP FSTENER FORME RKE MTL " /" " RHITETS, P 8 hurch ve SW " " " /" " " /" MP FORME RKE EXIST ON SIEWLK 1/" 1/" EXIST ON SIEWLK 11:7:1 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt 1' - 0 /" PNEL INTERSETION 1-0 SLE: 10" " EXIST x OLUMN ORNER ETIL 1-0 SLE: " " " FSTENER REK MTL ORNER FLSHING FSTENER HSS "x"x/1 ORRUGTE MTL PNEL NEW HSS "x"x/1 FORME RKE MP, E SIE FSTENER, FSTEN STU TO E HORIZONTL HSS MEMER FORME RKE " " ETIL -0 SLE: " " " 1/" " 1/" " 1/" 1/" " RKE MTL ON GW - OTTOM -0 SLE: /" EXT PLYWOO SHETHING E SIE OVER MTL 1 O MX " ETIL -0 SLE: " " " FORME RKE MTL MP FSTENER, FORME RKE MTL /" EXT PLYWOO SHETHING E SIE OVER MTL 1 O MX 1 RKE MTL - OTTOM (IL) -0 SLE: = 1'-0" ETIL 1-0 SLE: " /" /" " FORME RKE MTL, E SIE EXIST OOR MP /" PLYWOO SHETING, E SIE MTL STUS, FSTEN TO OOR FRME OVE RWING 0 ouglas ve NW ETILS -0

13 " " " HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS FORME RKE MTL MP HSS "x"x/1 FF ROLLE FORME, SEE ELEVS FOR RIUS 1-01 GTE 1 & - OULE GTE - INTERIOR VIEW SLE: -01 EXIST NOPY EXIST " EXIST FORME RKE MP FF 1-01 " ROLLE FORME, SEE ELEVS FOR RIUS " " " " -601 GTE 1 & - OULE GTE - EXTERIOR VIEW -601 SLE: -01 " EXIST NOPY EXIST HSS "x"x/1 () 1 /" 7' - " 6' - 7" " 6' - " TO OT OF NOPY 6' - 7" " 6' - " " REF SHE " " REF SHE " " " " ' - 0 1/" 9 /" ' - 10 /" " 1 /" 9 /" 8" ' - 0 1/" ' - 10 /" 8" 7' - " 6' - 7" " 6' - " 6' - 7" " 6' - " REF SHE " " ' - 0" " 1 /" ' - 0 1/" 9 /" ' - 10 /" 8" " 9 /" ' - 0 1/" ' - 10 /" 8" GTE SHEULE OOR NUMER E MT'L SIZE WITH 1 STL '-7" 1 STL '-7" STL '-8" STL '-8" STL '-8" STL '-8" STL '-0" STL '-0" 6 STL '-8" 6 STL '-8" 7 STL '-0" GTE SHEULE NOTES 1. SEE SPEIFITIONS, -001, FOR HRWRE SETS. PREPRE GTE FRMES S REQUIRE FOR INSTLLTION OF SPEIFIE HRWRE.. WITHS SHOWN RE FOR ROUGH OPENING SIZE. FIEL VERIFY OPENING FTER INSTLLTION OF NEW S. JUST WITHS S REQUIRE FOR PROPER GTE FUNTION N INSTLLTION OF HRWRE.. PROVIE EXTERIOR GTE HRWRE REVEL S SHOWN N ETILE IN /-601 T EH GTE.. LL FRMES SHLL E FINISHE IN ORNE WITH SPEIFITION SETION Issue ate TE ESIGNE RWN MRK TE Y ESRIPTION NS HEKE ' - 8" 7' - 8" " ' - 8" IL GTE ES NOT TO SLE 11:7:18 M :\Users\nduncan\ocuments\ v18 SE Fishburn - entral_nduncan.rvt FORME RKE HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS MP HSS "x"x/1 FF HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS EXIST ORRUGTE MTL PNELS " 1' - 10" ' - 0" ' - 0" 1' - 0" " " GTE - OULE GTE - INTERIOR VIEW SLE: -01 " ' - 0" GTE - SINGLE GTE - INTERIOR SLE: -0 " " " EXIST NOPY HSS "x"x/1 () EXIST EXIST EXIST NOPY FORME RKE EXIST HSS "x"x/1 FORME RKE MTL HSS "x"x/1 () FF EXIST FORME RKE MTL " HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS HSS "x"x/1 " " -601 GTE - OULE GTE - EXTERIOR VIEW -601 SLE: -01 ' - 8" " " " 7' - 8" GTE 6 - OULE GTE - INTERIOR -601 SLE: -01 " ' - 8" FORME RKE MP EXIST " FORME RKE HSS "X"X/1 HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS MP EXIST HSS "x"x/1 () MP FF " " ' - 0" " GTE - SINGLE GTE - INTERIOR -601 SLE: -01 ' - 0" HSS "x"x/1 () FORME RKE MTL HSS "x"x/1 () HSS x"x1/8" GTE FRMING, FULLY WELE, PROVIE 1/" P PLTES T LL OPEN ENS MP GTE 7 - SINGLE GTE - INTERIOR -601 SLE: 1' - " ± " ± 9" EQ EQ ' - 10" 10 /" 1/" 10 /" 1/" MIN 1/" MIN NOTES: 1. ONFIRM REQUIRE SIZE OF STEEL PLTE WITH TUL HRWRE IMENSIONS. OULE GTE SHOWN, SIMILR FOR SINGLE 1' - " ± 9" ± " EQ EQ " MIN " " ORRUGTE METL PNELS EYON 10 /"xx1/8" THIK PLTE STEEL WELE TO GTE FRME, ESE LL EXPOSE EGES, FINISH TO MTH FRME GTE FRME EYON GTE HRWRE WHERE OURS, REFER TO SPEIFITIONS FORME RKE MTL GTE HRWRE REVEL ELEVTION (IL) -601 SLE: 1 ORRUGTE METL PNEL EYON FORME RKE, REFER TO IL ETILS FOR SIMILR 1/8" THIK PLTE STEEL WELE TO GTE FRME, ESE LL EXPOSE EGES, FINISH TO MTH FRME GTE HRWRE, REFER TO SPEIFITIONS HSS x"x1/8" GTE FRMING FORME RKE, REFER TO IL ETILS FOR SIMILR ORRUGTE METL PNEL GTE HRWRE REVEL SETION -601 SLE: RHITETS, P 8 hurch ve SW 0 ouglas ve NW GTE ELEVTIONS RWING -601