Glass Systems and Solutions. Price List 28

Transcription

1 Glass Systems and Solutions Price List 28 Effective July 19, 2018

2 Introduction Table of Contents Table of Contents Introduction Contact Information iii Finish Codes iv Product Shipping Schedule v Warranty Policy vii Terms of Sale viii Application Guide ix DRS Rails, Channels and 1 Center Hung Patch Fittings and Designer Pivots 7 Offset Hung Patch Fittings 65 Headers and 71 Closers and 89 for Glass Doors 107 Pulls and Handles 121 Sliding Systems 17 MANET Pivoting/Sliding Door Systems 209 Panic 229 ii July 19, 2018 Glass Systems and Solutions Price List #28

3 Contact Information Introduction Contact Information dormakaba USA Inc. Dorma Drive, Drawer AC Reamstown, PA Office Hours Monday Friday 8:00 AM to 6:00 PM EST Phone requesting quotes FAX Glass Systems and Solutions Price List #28 July 19, 2018 iii

4 Introduction Finish Codes Finish Codes dormakaba GMBH Finish # Ref. dormakaba USA Finish # BHMA Equivalent Reference dormakaba Code Anodized Aluminum Parts Mill ML Clear 101/ CL Anodized Brass SB Similar to Stainless Steel 107/11 107/ SSS Dark Bronze DB Black BK Aluminum Color EV-1 Polished Chrome ARC Special Anodized SA Brass Polished Brass with Lacquer PBL Polished Brass without Lacquer 50 PB Satin Brass without Lacquer SB Polished Nickel PN Satin Nickel (Similar to Satin Stainless) SN Steel or Stainless Steel Satin Chrome Plated SC Polished Chrome Plated PC Satin Stainless Steel SS Polished Stainless Steel PS Bronze Satin Bronze without Lacquer SBZ Polished Bronze without Lacquer PBZ Dark Bronze Oxidized, Oil Rubbed B Special Clad (Plating) Special Clad (Plated) Finish SPL Painted or Powder Coated Primer PR Special Paint/Powder SF Aluminum SBZ Dark Bronze PBZ Satin Bronze B Black BK Dark Duranodic Bronze DB Gold Plastic Parts Black BK Similar to 101/150 Clear Similar to Satin Stainless 808 List $ Finish Sample Item # (includes finishes 101, 108, 109, 50, 599, 600, 601, 700, 701) 0 NOTES: Custom powder or paint finishes ordered as 99 or 999, non-standard cladding ordered as 299, or non-standard anodizing ordered as 199 must be approved by dormakaba prior to quoting. Not all custom finishes are possible at the published list prices. If a non-standard finish request is approved by dormakaba for processing, a quote will be required. Any custom powder or wet coat orders (99 or 999) will include a net charge of $200 per purchase order. dormakaba always reserves the right to refuse any custom finish order. Finish # is dormakaba s numerical representation within the part number. Please contact factory for special finishes. Note that full length finished extrusions may include clamping marks to be cut off in field prior to installation. dormakaba finishes are representative of industry recognized BHMA or other finishes. Exact match from dormakaba to a base metal finish, a competitors product, or from lot to lot is never guaranteed. iv July 19, 2018 Glass Systems and Solutions Price List #28

5 Product Shipping Schedule Introduction Product Shipping Schedule Key Orders received by 2:00 PM EST Mon. Tues. Wed. Thurs. Fri. 1 Non-Fabricated items ship in 1 business day Tues. Wed. Thurs. Fri. *Mon. Standard Fabricated and Non-Standard Fabricated items ship in up to business days Thurs. Fri. *Mon. *Tues. *Wed. 5 Custom Fabricated items ship in up to 5 business days *Mon. *Tues. *Wed. *Thurs. *Fri. Special Fabricated/Finishes and Special Order items up to 5 weeks. 8W Special Order custom product glabally sourced from dormakaba factory up to 8 weeks * Indicates the following week. NOTE: Above fabrication schedule is based on 10 fabrication items per order. For fabrication orders over 10 per order, contact Customer Service for a custom schedule. 1 NON- FABRICATED STANDARD FABRICATED NON-STANDARD FABRICATED 5 CUSTOM FABRICATED Select Patch Fittings and ; see individual price pages for details. RTS88 and BTS80 Closers and in limited finishes. Select Handles; see individual price pages for details. (Excludes custom handles.) Select DRS Rails and ; see individual price pages for details. (Excludes Mitres.) Select DRS Dri-Fit Sidelite rails; see individual price pages for details. (Excludes Mitres.) Select 4-1/8" or 4-1/2" Headers; see individual price pages for details. (Excludes Mitres.) NOTE: All headers are shipped with closers installed unless supplied from select service or requested otherwise. U-Channels and Dri-Fit Channels, any length. Select Mechanical Channel components; see individual price pages for details. Select Manual Slider Systems; see individual price pages for details. (Excludes Syncro & DORMOTION.) Select 4-1/8" or 4-1/2" Headers fabricated to special lengths (standard 2-/4" pivot point, standard finishes). NOTE: All headers are shipped with closers installed unless supplied from select service or requested otherwise. Miters (DRS Rails, Headers, Dri-Fit Sidelites and U-Channel) at any length and any angle. EMSL 2765 Shear Locks installed in DRS Rails and/or Headers (standard or non-standard Fab lengths). Special pivot point preparations, other than 2-/4" pivot point, DRS Rails and/or Headers). Vertical Stile, Floating Header, Offset Pivot preparation and/or installation. SPECIAL FABRICATED/ FINISHES Orders requiring competitor (non-dormakaba) hardware preparation or installation are scheduled on a project basis once all competitor product/templates are received. Allow up to five (5) weeks from that point. HSW/FSW systems see notes below. SPECIAL ORDER Special finishes will be scheduled based on required process capacity. Allow up to five (5) weeks. Paint/Powder Coat capacity based on back log; last in last out (LILO) at time of purchase order. Allow up to five (5) weeks. No returns accepted on special order items. 8W SPECIAL ORDER Custom product will be scheduled based on required production capacity from a global dormakaba factory. Allow up to eight (8) weeks. No returns accepted on special order items. Order Entry To improve production lead times and exceed expectations, dormakaba requires the following for order entry: Production timeline starts once a clean order is received and if necessary, customer signoff is provided. Orders will be entered once all relevant details have been received, which results in a clean order (part numbers, glass thickness, cut dimensions, finish codes, customer drawings and templates, resulting customer sign-off if required, and any other pertinent information). Any delay in obtaining these details will delay order entry and acknowledgement. Order Changes 1. Non-Fabricated: changes may be made up to 4 business hours after the order is acknowledged, unless the order has been packed. Changes, regardless of the timing, may result in order rescheduling. 2. Standard or Non-Standard Fabricated: changes may be made up to 4 hours after the order is acknowledged, or later if production/fabrication of the order has not started. Changes or cancellations are subject to rescheduling and change fees, based on order progress and un-recoupable production costs at time of request. Charges determined at dormakaba s discretion.. Custom & Special Fabrication/Finishes: changes may be made up to 24 hours after the order is acknowledged, or later if production/fabrication of the order has not started. Changes or cancellations are subject to rescheduling and change fees, based on type of change requested, order progress, and un-recoupable production costs at time of request. Charges determined at dormakaba s discretion. NOTES: FedEx will ship a maximum of 10 united inches (length + 108" maximum length. Accelerated shipping is available at customer expense. dormakaba is committed to using the most efficient method of shipping orders unless otherwise specified. Orders are not guaranteed to ship same day. Order scheduling is based on capacity at time of order. Additional expenses to dormakaba as a result of special packaging request from customer will be added to the customer invoice & may extend lead time. HSW/FSW lead-time quoted at time of order. Lead-times will vary based on complexity of order. Published lead times and promise dates do not account for time delays stemming from customer requirements (drawings, approvals, etc.). Lead times will be extended relative to time delay. Glass Systems and Solutions Price List #28 July 19, 2018 v

6 Introduction Preparing or Installing Competitor Delivery Ship dates are contingent upon conditions at time of acknowledgement and can be subject to delays due to strikes and/or other labor issues, material shortages, equipment failure, fire, flood, or other acts of God, or causes beyond our control. dormakaba is not liable under any circumstances for consequential damages arising from such delays. Freight Policy All goods are shipped F.O.B. Reamstown, PA. Shipments will be prepaid and charges added to the invoice for customers with accounts and COD for orders under $1, net for non-account holders. Freight charges are prepaid and allowed on any one order to one destination (Mainland U.S.A) by carrier of dormakaba choice, for orders with net price of $5, minimum. Preparing or Installing Competitor Orders requiring competitor (non-dormakaba) hardware preparation or installation are scheduled on a project basis once all required information is received. Allow 5 weeks once all required information (i.e. a clean order) has been submitted. Larger orders will impact lead time. By ordering product requiring custom (including non-dormakaba hardware) fabrication, the Buyer acknowledges and accepts responsibility to provide the most recent, correct, and applicable templates, drawings and manuals to ensure correct fabrication. dormakaba retains final discretion on competitor hardware that does not match customer-provided documentation and is not liable for any resulting charges or delays. Anything not on this list is subject to a minimum of 5-week lead time. Competitor prep charges and lead times may be reviewed based on complexity. Option Function Manufacturer Model Not Compatible with 2-1/2" DRS Rails * CMP HDWP CMP E-LOCK Auto Operator Besam SW200i-CP X Horton 4800LE X Astro Swing X LCN 2810-CP X Stanley Magic Swing Closer Glynn Johnson 100 Series X Jackson 2011M22 LCN Rixson 200-CP 077-CP 610-CP 600-CP X X X X 28 BTM Arm X 554 BTM Arm X Top, Bottom Pivots, IVES 7255 Sets Rixson H X 587 Mag Lock Dynalock 002 Schlage M490 SDC 1511 M2 X M62 X Securitron M82 M680 Mag Lock (Double) Securitron DM62 X Shear Lock GF000/TRD/BRD X Locknetics 280+ X 422 X Securitron SAM B SAM X X * 2-1/2 rail fabrication will be reviewed prior to order entry. vi July 19, 2018 Glass Systems and Solutions Price List #28

7 Warranty Policy Introduction Warranty Policy All dormakaba closers that are BHMA certified to ANSI A156.4 Grade 1 Standard for Door Controls-Closers, except U1500 Series, are covered by a 25-year warranty. This includes BTS Series concealed floor closers, except where noted. All fire/life safety products that are BHMA certified to ANSI A Grade 1 Standard for Closer-Holder Release Devices carry a 25-year warranty on the closer mechanism and a 2-year warranty on any electrical or electronic component. The RTS Series overhead-concealed closers carry a 5-year warranty. All other products not mentioned above carry a 2-year warranty. All interior wall systems including HSW, FSW, PURE, PURE Enclose, Prive, and Fusion include a five (5) year warranty from date of substantial completion, exclusive of glass, wood doors, labor, or competitors products or components. All door hardware components within the system such as door handles, electronic locking devices, etc. revert to the original component warranty. All dormakaba products including MUNDUS, Universal, TENR, DRS, Headers, MUTO Premium and Comfort, RS-120, DRS-120, AGILE 150, MANET, BEYOND, VISUR, and Exit are covered by a 2-year warranty. All goods sold are warranted to be free from defects in material and workmanship, the foregoing comprises seller s sole and entire warranty. All other warranties, written or verbal, expressed or implied, and including but not limited to warran ties of merchantability or fitness for intended purpose are expressly excluded. Seller s sole obligation under these warranties, during the period after date of manufacture as listed above, shall be to issue credit, repair or replace any items or part thereof which is proved to be other than as warranted. Seller shall have the sole right to deter mine whether such parts shall be repaired or replaced or whether credit shall be issued. No allowance shall be made for any labor charges for replace ment of parts, adjustments or repairs, or any other work. In no event shall seller be liable for collateral or consequential damages. If goods are claimed to be other than as warranted, seller, upon notice promptly given, will either examine the goods at their site or issue shipping instructions for return to seller (transportation costs prepaid by buyer). These warranties shall not extend to any goods or parts thereof which have been subjected to misuse or neglect, damage by accident, rendered defective by reason of improper installation or by the performance of repairs, modifications or attachment to other products outside of seller s plant. Because dormakaba has no control over conditions under which its products are used, dormakaba specifically does not warrant the adequacy or sufficiency of any device or recommendations given to buyer. Nor does dormakaba warrant that every dormakaba product complies with every code, standard or regulation in every community except as specifically stated in a published dormakaba catalog or in writing by an officer of the company. Nor is dormakaba bound by the terms of buyer s agreements with other parties. For projects located outside the United States or Canada, the limited warranty period for all products is 1 year from the date of manufacture. dormakaba regional businesses located outside the United States or Canada may offer different warranty periods. United States or Canada is defined as the several states of the United States, the District of Columbia, the commonwealths, territories and possessions of the United States, and all of the Canadian provinces and territories. Glass Systems and Solutions Price List #28 July 19, 2018 vii

8 Introduction Terms of Sale Terms of Sale Prices All prices shown are in U.S. Dollars and are subject to change without notice. Prices on acknowledged orders are firm for shipment within three months of order date. All other orders subject to price in effect at time of shipment. Terms 1% 10 Days, Net 0. Minimum Order $50.00 net minimum invoice. Orders We reserve the right to decline the whole or part of orders in which price, finishes, quantity of goods, or credit status of the buyer is not satisfactory to us. We reserve the right to discontinue items or change specifications at any time without notice and without incurring any obligations. dormakaba cannot be held liable for extended delivery dates that may result in the cancellation of an order. Acknowledgments Acknowledgements are exact copies of the manufacturing order and should be checked upon receipt. If acknowledge ment is incorrect, please notify dormakaba Customer Service immediately. Order Cancellations and Changes For standard product or standard fabricated product (i.e., products that are not custom and not special order) with a defined 1 to day lead time: Changes or cancellations will be allowed without penalty within hours of order acknowledgement. Changes or cancellations made more than hours after order acknowledgement may incur a fee for recovery of processing costs. Charges for changing an order will be based on the status of the order at the time of the change. Orders cancelled more than hours after order acknowledgement will incur a 50% minimum restock fee. For standard product or standard fabricated product (i.e., products that are not custom and not special order) with a defined 5 days or more lead time: Changes or cancellations will be allowed without penalty within 24 hours of order receipt. Changes or cancellations made more than 24 hours of order receipt may incur a fee for recovery of processing costs. Charges for changing an order will be based on the status of the order at the time of the change. Orders cancelled more than 24 hours after order receipt will incur a 50% minimum restock fee. Cancellations for custom or special order products will not be accepted and will be invoiced the full value of the order. Returned Goods Goods determined defective within the terms of our warranty may be returned for replacement. Goods returned due to any other factors are subject to a 5% restocking fee. For all returns contact the factory for a Return of Goods Authorization number (RGA). All returns must bear the RGA number provided. Unauthorized returns will not be accepted. The complete RGA policy is available upon request. All returns must be shipped to: dormakaba USA Inc. Returns Department 1 Dorma Drive Reamstown, PA To protect our customers from liability, do not sign the delivery receipt until shipment has been inspected thoroughly. Customer is responsible to make necessary notations on the delivery receipt after inspection. Failure to note damaged items and/ or shortages on the receipt releases dormakaba from all liability; therefore, customer is responsible for any replacement costs. If damage or shortage is noted, please notify your dormakaba customer service representative within 48 hours of receiving your shipment. viii July 19, 2018 Glass Systems and Solutions Price List #28

9 Application Guide Introduction Application Guide Type P Door RTS88 Closer Pivot RTS88 Closer Pivot " (05) " (05) B.T.B. 12" (05) /4" " (05) Push/Pull " (05) Pivot Optional BTS80 Closer Pivot Optional BTS80 Closer Type BP Door RTS88 Closer Pivot RTS88 Closer Pivot /4" 4 10" (254) " (254) B.T.B " (254) " (254) 10" (254) Push/Pull Pivot Optional BTS80 Closer Pivot Optional BTS80 Closer Key 1-5/8 (92) or 4 (102) DRS Top Dri-Fit Sidelite Rail (Fixed Panel) 2-5/8 (92) or 4 (102) DRS Top Rail 886 or 854-5/8 (92) or 4 (102) DRS Top Rail 55.0 or /8 (92) or 4 (102) DRS Bottom Dri-Fit Sidelite Rail (Fixed Panel) 5-5/8 (92) or 4 (102) DRS Bottom Rail 8852 with or without Lock 6-5/8 (92) or 4 (102) DRS Bottom Rail 55.1 or 7422 with or without Lock 7 6 (152) or 10 (254) DRS Top Dri-Fit Sidelite Rail (Fixed Panel) 8 6 (152) or 10 (254) DRS Top Rail 886 or (152) or 10 (254) DRS Top Rail 55.0 or (152) or 10 (254) DRS Bottom Dri-Fit Sidelite Rail (Fixed Panel) 11 6 (152) or 10 (254) DRS Bottom Rail 8852 with or without Lock 12 6 (152) or 10 (254) DRS Bottom Rail 55.1 or 7422 with or without Lock NOTE: Throughout the Price List, measurements are shown as inches (mm), for example: /8 (10). Glass Systems and Solutions Price List #28 July 19, 2018 ix

10 Introduction Application Guide Type A Door x 1-/4" (44) Dri-Fit U-Channel Lock Lock Strike Lock Handle Strike 12" (05) " (05) B.T.B x 1" (25) Dri-Fit U-Channel x 1" (25) Dri-Fit U-Channel x 1" (25) Dri-Fit U-Channel x 1-/4" (44) U-Channel x 1-/4" (44) U-Channel x 1-/4" (44) U-Channel (Special Order) RTS88 Closer " (254) 12" (05) 10" (254) " (254) B.T.B " (05) B/B " (254) B.T.B x 1" (25) Dri-Fit U-Channel x July 19, 2018 Glass Systems and Solutions Price List #28

11 Table of Contents DRS Rails, Channels, and DRS Rails, Channels, and Select Service 2 DRS Rails Ordering Guide 4 Top Rails 5 Bottom Rails 11 Bottom Rail Locking 16 DRS and Options DRS Rail Covers 2 DRS Rail End Caps 24 Vertical Stiles 25 Weather Brush/Weather Seal 25 DRS Rail Shim 25 Saddles and Thresholds 25 DRS Dri-Fit Sidelite Rails Ordering Guide 26 Sidelite Rails 27 Dri-Fit Options and 29 Glazing and Dri-Fit U-Channels and Sidelite Glazing and Dri-Fit U-Channels and Sidelite 1 Dri-Fit Channel for /8", 1/2" and 5/8", /4" Glass 1 Dri-Fit Channel for End Cap (Snap Fit) 2 Dri-Fit Channel Gasket 2 DRS and Options DRS Rail Locks Cylinders BTS Offset Arms and Pivots RTS88 Arms and Pivots 4 DRS Options 5 Mechanical Channel and End Cap 5 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

12 DRS Rails, Channels, and Select Service Select Service Quick Ship DRS Rails, Channels, and Select service should be used for small quantities of popular dormakaba products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: dormakaba receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. dormakaba receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. dormakaba reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to dormakaba. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Products and prices are subject to change without notice. Limited quantities available. Key N "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse E W Available only in East Coast Warehouse Available only in West Coast Warehouse DRS Rails, Channels, and Choose top or bottom rail and rail height from the four options: 1/2" Glass Ref. # Warehouse Product Top/Bottom U/M Height Locking Style Finish List $ SS E DRS Rail Top Ea. 2-1/2" No SQ SS E DRS Rail Top Ea. 2-1/2" No SQ SS E DRS Rail Top Ea. 2-1/2" No SQ SS E DRS Rail Top Ea. -5/8" No SQ SS E DRS Rail Top Ea. -5/8" No SQ SS E DRS Rail Top Ea. 4" No SQ SS E DRS Rail Top Ea. 4" No SQ SS E DRS Rail Bottom Ea. 2-1/2" No SQ SS E DRS Rail Bottom Ea. 2-1/2" No SQ SS E DRS Rail Bottom Ea. 2-1/2" No SQ SS E DRS Rail Bottom Ea. 2-1/2" Yes SQ SS E DRS Rail Bottom Ea. 2-1/2" Yes SQ SS E DRS Rail Bottom Ea. 2-1/2" Yes SQ SS E DRS Rail Bottom Ea. -5/8" No SQ SS E DRS Rail Bottom Ea. -5/8" No SQ SS E DRS Rail Bottom Ea. -5/8" Yes SQ SS E DRS Rail Bottom Ea. -5/8" Yes SQ SS E DRS Rail Bottom Ea. 4" No SQ SS E DRS Rail Bottom Ea. 4" No SQ SS E DRS Rail Bottom Ea. 4" Yes SQ SS E DRS Rail Bottom Ea. 4" Yes SQ NOTE: Top rails include 886 arm. Bottom rails include 8852 pivot. See page for details. 2 July 19, 2018 Glass Systems and Solutions Price List #28

13 Select Service DRS Rails, Channels, and DRS Top Rails for Center Hung Doors Choose top or bottom rail and rail height from the four options: Ref. # Warehouse Product Top/Bottom Locking Height Cover Style Glass Finish List $ E DRS Cover No 2-1/2" COV SQ /8" 9/16" (10 14) E DRS Cover No 2-1/2" COV SQ /8" 9/16" (10 14) E DRS Cover No 2-1/2" COV SQ /8" 9/16" (10 14) E DRS Cover Bottom Yes 2-1/2" COV SQ /8" 9/16" (10 14) E DRS Cover Bottom Yes 2-1/2" COV SQ /8" 9/16" (10 14) E DRS Cover Bottom Yes 2-1/2" COV SQ /8" 9/16" (10 14) E DRS Cover -5/8" COV SQ 1/2" (12) E DRS Cover -5/8" COV SQ 1/2" (12) E DRS Cover -5/8" COV SQ 1/2" (12) E DRS Cover 4" COV SQ 1/2" (12) E DRS Cover 4" COV SQ 1/2" (12) E DRS End Cap 2-1/2" End Cap SQ 1/2" (12) E DRS End Cap 2-1/2" End Cap SQ 1/2" (12) * E DRS End Cap 2-1/2" End Cap SQ 1/2" (12) E DRS End Cap -5/8" End Cap SQ E DRS End Cap -5/8" End Cap SQ * E DRS End Cap -5/8" End Cap SQ E DRS End Cap 4" End Cap SQ E DRS End Cap 4" End Cap SQ DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & * 109 finish for all rail end caps, 108 not available NOTE: 619 finish end caps are used for 700 finish rails. Ref. # Warehouse Product Description Finish List $ SS E CYL Mortise cylinder for DRS lock, with split ring SS E CYL Mortise cylinder for DRS lock, with split ring SS E TT Mortise thumb-turn for DRS lock, with split ring SS E TT Mortise thumb-turn for DRS lock, with split ring SS E DUMY Mortise dummy (blank) cylinder for DRS lock, with split ring SS E DUMY Mortise dummy (blank) cylinder for DRS lock, with split ring DRS Top Rails Consist of: Qty U/M HDW 1 Ea. 886 Arm 1 Ea. Top Rail 1 Set Covers 1 Set End Caps DRS Bottom Rails Consist of: 1 Ea Pivot 1 Ea. Bottom Rail 1 Set Covers 1 Set End Caps 1 (Locking) Ea. Brass Lock DRS Bottom Rails Consist of: 1 Ea Pivot 1 Ea. Bottom Rail 1 Set Covers 1 (Non-Locking) Set End Caps MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19, 2018

14 DRS Rails, Channels, and DRS Rails DRS Rails Ordering Guide Less Covers Model DRS Ordered Less Covers or Cladding NO DRS EC2 TOP 58 STK SQ End Cap for Rail (1 each) End Cap for Rail (2 each) No End Cap for Rail Glass Thickness 1/2 NONE 2765 PANIC None NONE Top Rail Lock Top & Bottom Bottom Top EC1 2-1/2" Top Rail 25 EC2-5/8" Top Rail 58 NONE 4" Top Rail 4 End Cap Rail Location TOPBTM BTM TOP 6" Top Rail 10" Top Rail NONE 6 10 Top Rail STK Stock Length 5-/4" (907) SPECIFY Custom Length NONE TTXTT TTXDUMY Cylinder Thumb Turn CYLXTT Cylinder Dummy CYLXDUMY None NONE Cylinder for Brass Lock Rail Length SQ TP Top Rail Profile Top Rail NONE Square Rail 9/16" (14) Tempered 9/16 Laminated Glass 11/16 11/16" (17) Tempered Laminated Glass Bottom Rail Lock 1/16 1/16" (20) Tempered Laminated Glass NONE None 1/2 1/2" (12) Glass PANIC DG1000/DG100 Prep /8 /8 (10) Glass BRASSLK125 Brass Lock for 2-1/2" Rail 5/8 5/8 (16) Glass ² BRASSLK178 Brass Lock Vertical Stiles VERTPACK /4 /4" (19) Glass ² BRASSLK1916 Brass Lock None NONE Magnetic Shear Lock DG1000/DG100 Prep Thumb Turn Thumb Turn Thumb Turn Dummy 1 Tapered Rail (TP) available only with 2-1/2", -5/8", and 4" rails. 2 5/8" (16) and /4" (19) glass (Not available with 4" high rail). dormakaba reserves the right to refuse Custom Finishes. 4 All Custom Finishes require customer sign-off/approval of color chip. Bottom Rail 10L 6L 4L 58L 25L " Bottom Rail w/ Lock 6" Bottom Rail w/ Lock 4" Bottom Rail w/ Lock -5/8" Bottom Rail w/ Lock 2-1/2" Bottom Rail w/ Lock 10" Bottom Rail 6" Bottom Rail 4" Bottom Rail -5/8" Bottom Rail 2-1/2" Bottom Rail Tapered Rail 1 Vertical Stiles NONE Standard Finish RTS End Load Arm Top Rail Insert (15 mm pin) Top Rail, Side Load, Adjustable Insert (Not Available w/ 2-1/2" Rail) None continued below 1/ NONE None Bottom Rail Custom Preps NO Clear Anodized (CL) Dark Bronze (DB) Black Anodized (BK) Polished Brass w/o Lacquer (PB) Satin Brass w/o Lacquer (SB) Satin Bronze w/o Lacquer (SBZ) Polished Bronze w/o Lacquer (PB2) Satin Stainless Steel (SS/US2D) Polished Stainless Steel (PS/US2) Special Anodized (Specify) Special Cladding (Specify) Special Paint or Powder Coat (Specify) Finish Custom, 4 HDWPREP CMP HDWP CMP HDW1 CMP SHEAR NO Bottom Rail Arm for 8852 Floo Bottom Rail Insert for BTS (Not Available w/ 2-1/2" Rail) BTM Rail Arm for BTS/7471K Custom Prep/Install of DORMA Competitor Prep Competitor Prep/Install Competitor Electromagnetic Shear Lock or Magnetic Lock Armature Prep 4 July 19, 2018 Glass Systems and Solutions Price List #28

15 DRS Rails DRS Rails, Channels, and DRS Top Rails, Type P, Finished Door Size 24" (610) to 48" (1219) Default 1/2" (12) unless otherwise specified Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic DRS Rails, Channels & Square (SQ) DRS Top Rail 886 ( ) Arm Tapered (TP) DRS Top Rail 886 ( ) Arm Standard Finishes $ Custom Finishes $ DRS Top Rail Square (SQ) or Tapered (TP) with 886 ( ) Arm Profile Ref. # U/M Glass Thickness /109 50/ / / / (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) Glass Systems and Solutions Price List #28 July 19,

16 DRS Rails, Channels, and DRS Rails DRS Top Rails, Type P, Finished Door Size 24" (610) to 48" (1219) Default 1/2" (12) unless otherwise specified Standard Finishes $ Custom Finishes $ DRS Top Rail Square (SQ) or Tapered (TP) with 886 ( ) Arm /109 50/ / / / Profile Ref. # U/M Glass Thickness (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) ,008 SQ Ea. 1/2" (12) ,008 SQ Ea. 5/8" (16) ,020 1, ,022 1,129 SQ Ea. /4" (19) ,020 1, ,022 1,129 SQ Ea. 9/16" (14) , ,001 1,096 SQ Ea. 11/16" (17) ,108 1, ,110 1,217 Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Shear Locks can be ordered complete with Headers or can be ordered as a separate sales order line item. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. 6 July 19, 2018 Glass Systems and Solutions Price List #28

17 DRS Rails DRS Rails, Channels, and Patch Fittings & Designer Pivots Offset Hung Patch Fittings Panic DRS Rails, Channels & Headers & MANET Sliding Pulls & Closers & Systems Handles Square (SQ) DRS Top Rail 55.0 ( ) Insert DRS Top Rail Square (SQ) or Tapered (TP) with 55.0 ( ) Insert Tapered (TP) DRS Top Rail 55.0 ( ) Insert Standard Finishes $ Custom Finishes $ /109 50/ / / / Profile Ref. # U/M Glass Thickness (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) Glass Systems and Solutions Price List #28 July 19,

18 DRS Rails, Channels, and DRS Rails DRS Top Rails, Type P, Finished Door Size 24" (610) to 48" (1219) Default 1/2" (12) unless otherwise specified Standard Finishes $ Custom Finishes $ DRS Top Rail Square (SQ) or Tapered (TP) with 55.0 ( ) Insert /109 50/ / / / Profile Ref. # U/M Glass Thickness (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) , ,104 SQ Ea. /4" (19) , ,104 SQ Ea. 9/16" (14) , ,074 SQ Ea. 11/16" (17) ,08 1, ,086 1,192 Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Shear Locks can be ordered complete with Headers or can be ordered as a separate sales order line item. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. 8 July 19, 2018 Glass Systems and Solutions Price List #28

19 DRS Rails DRS Rails, Channels, and Panic DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Square (SQ) DRS Top Rail 55.9 ( ) Pivot Insert Tapered (TP) DRS Top Rail 55.9 ( ) Pivot Insert DRS Top Rail Square (SQ) or Tapered (TP) with 55.9 ( ) Pivot Insert Standard Finishes $ Custom Finishes $ /109 50/ / / / Profile Ref. # U/M Glass Thickness (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP 24.1 Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) Glass Systems and Solutions Price List #28 July 19,

20 DRS Rails, Channels, and DRS Rails DRS Top Rails, Type P, Finished Door Size 24" (610) to 48" (1219) Default 1/2" (12) unless otherwise specified Standard Finishes $ Custom Finishes $ DRS Top Rail Square (SQ) or Tapered (TP) with 55.9 ( ) Pivot Insert /109 50/ / / / Profile Ref. # U/M Glass Thickness (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) ,012 SQ Ea. 1/2" (12) ,012 SQ Ea. 5/8" (16) ,025 1, ,027 1,1 SQ Ea. /4" (19) ,025 1, ,027 1,1 SQ Ea. 9/16" (14) ,00 1, ,005 1,100 SQ Ea. 11/16" (17) ,11 1, ,115 1,221 Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Shear Locks can be ordered complete with Headers or can be ordered as a separate sales order line item. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. Model U/M Ref. # Description List $ 886 Ea /8" End Load Top Arm, RTS Ea Top Rail Insert for 15 mm Pin Ea Top Rail Adjustable Insert 54 LGAA Ea M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 0 LGA Ea M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 78 MTIPS Set M Scotch-Weld EPX plus II mixing square nozzle, 5. mm (4 tips pers set) 10 List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device in rail 75 ELCK PREP dormakaba EMSL Shearlock, or EML Magnetic Lock armature preparation and installation in DRS rail 165 HDWPREP Prep and Install of non-standard dormakaba hardware (i.e., offset pivots, arms, etc.) in DRS rail 75 CMP HDWP Competitors hardware only prep. in DRS rail (charge may be reviewed based on complexity) 90 CMP HDWI Competitors hardware preparation and installation in DRS rails 150 CMP SHEAR Competitors Electro-Magnetic Shear Lock or Magnetic Lock Armature Preparation only in DRS rails 250 MITER Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. 10 July 19, 2018 Glass Systems and Solutions Price List #28

21 DRS Rails DRS Rails, Channels, and DRS Bottom Rails, No Lock Default 1/2" (12) unless otherwise specified Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic DRS Rails, Channels & Square (SQ) DRS Bottom Rail No Lock 8852 ( ) Pivot Tapered (TP) DRS Bottom Rail No Lock 8852 ( ) Pivot DRS Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot Standard Finishes $ Custom Finishes $ /109 50/ / / / Profile Ref. # U/M Glass Thickness (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) Glass Systems and Solutions Price List #28 July 19,

22 DRS Rails, Channels, and DRS Rails DRS Bottom Rails, No Lock Default 1/2" (12) unless otherwise specified Standard Finishes $ Custom Finishes $ DRS Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot /109 50/ / / / Profile Ref. # U/M Glass Thickness (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) ,00 SQ Ea. 1/2" (12) ,00 SQ Ea. 5/8" (16) ,081 1, ,040 1,15 SQ Ea. /4" (19) ,081 1, ,040 1,15 SQ Ea. 9/16" (14) ,05 1, ,017 1,118 SQ Ea. 11/16" (17) ,169 1, ,128 1,241 Standard or Non-Standard Fabricated; lead time up to business days. Laminated Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. 12 July 19, 2018 Glass Systems and Solutions Price List #28

23 DRS Rails DRS Rails, Channels, and DRS Rails, Channels & Square (SQ) DRS Bottom Rail No Lock 55.1 ( ) Insert DRS Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert Tapered (TP) DRS Bottom Rail No Lock 55.1 ( ) Insert Standard Finishes $ Custom Finishes $ /109 50/ / / / Patch Fittings & Designer Pivots Profile Ref. # U/M Glass Thickness (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) z TP Ea. 9/16" (14) (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) ,022 SQ Ea. 1/2" (12) ,022 SQ Ea. 5/8" (16) ,072 1, ,01 1,144 SQ Ea. /4" (19) ,072 1, ,01 1,144 SQ Ea. 9/16" (14) ,045 1, ,009 1,110 SQ Ea. 11/16" (17) ,160 1, ,119 1,22 Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. Panic Glass Systems and Solutions Price List #28 July 19,

24 DRS Rails, Channels, and DRS Rails DRS Bottom Rails, No Lock Default 1/2" (12) unless otherwise specified Square (SQ) DRS Bottom Rail No Lock 7422 ( ) Arm Tapered (TP) DRS Bottom Rail No Lock 7422 ( ) Arm Standard Finishes $ Custom Finishes $ DRS Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm /109 50/ / / / Profile Ref. # U/M Glass Thickness (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ 24.0 Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) July 19, 2018 Glass Systems and Solutions Price List #28

25 DRS Rails DRS Rails, Channels, and Standard Finishes $ Custom Finishes $ DRS Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm /109 50/ / / / Profile Ref. # U/M Glass Thickness (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) , ,044 SQ Ea. 1/2" (12) , ,044 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings SQ Ea. 5/8" (16) ,119 1, ,056 1,169 SQ Ea. /4" (19) ,119 1, ,056 1,169 SQ Ea. 9/16" (14) ,087 1, ,01 1,12 SQ Ea. 11/16" (17) ,207 1, ,144 1,257 Headers & Standard or Non-Standard Fabricated; lead time up to business days. Laminated Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. Model U/M Ref. # Description List $ 8852 Ea /8" End Load Bottom Arm, RTS Ea Bottom Rail Insert for 15 mm Pin Ea Bottom Rail Adjustable Insert 59 LGAA Ea M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 0 LGA Ea M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 78 MTIPS Set M Scotch-Weld EPX plus II mixing square nozzle, 5. mm (4 tips pers set) 10 List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device in rail 75 ELCK PREP dormakaba EMSL Shearlock, or EML Magnetic Lock armature preparation and installation in DRS rail 165 HDWPREP Prep and Install of non-standard dormakaba hardware (i.e., offset pivots, arms, etc.) in DRS rail 75 CMP HDWP Competitors hardware only prep. in DRS rail (charge may be reviewed based on complexity) 90 CMP HDWI Competitors hardware preparation and installation in DRS rails 150 CMP SHEAR Competitors Electro-Magnetic Shear Lock or Magnetic Lock Armature Preparation only in DRS rails 250 MITER Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

26 DRS Rails, Channels, and DRS Rails DRS Bottom Rails, Locking Default 1/2" (12) unless otherwise specified Square (SQ) DRS Bottom Rail Locking 8852 ( ) Pivot Tapered (TP) DRS Bottom Rail Locking 8852 ( ) Pivot Standard Finishes $ Custom Finishes $ DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot /109 50/ / / / Profile Ref. # U/M Glass Thickness (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) July 19, 2018 Glass Systems and Solutions Price List #28

27 DRS Rails DRS Rails, Channels, and DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot Profile Ref. # U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / / DRS Rails, Channels & (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) , ,062 SQ Ea. 1/2" (12) , ,062 SQ Ea. 5/8" (16) ,116 1, ,076 1,189 SQ Ea. /4" (19) ,116 1, ,076 1,189 SQ Ea. 9/16" (14) ,085 1, ,049 1,150 SQ Ea. 11/16" (17) ,204 1, ,164 1,277 Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

28 DRS Rails, Channels, and DRS Rails DRS Bottom Rails, Locking Default 1/2" (12) unless otherwise specified Square (SQ) DRS Bottom Rail Locking 55.1 ( ) Insert Tapered (TP) DRS Bottom Rail Locking 55.1 ( ) Insert Standard Finishes $ Custom Finishes $ DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert /109 50/ / / / Profile Ref. # U/M Glass Thickness (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) July 19, 2018 Glass Systems and Solutions Price List #28

29 DRS Rails DRS Rails, Channels, and DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert Profile Ref. # U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / / DRS Rails, Channels & (10) 10" Rail Height SQ Ea. /8" (10) , ,022 1,054 SQ Ea. 1/2" (12) , ,022 1,054 SQ Ea. 5/8" (16) , ,067 1,144 1,180 SQ Ea. /4" (19) , ,067 1,144 1,180 Patch Fittings & Designer Pivots SQ Ea. 9/16" (14) , ,041 1,142 1,110 SQ Ea. 11/16" (17) , ,155 1,268 1,22 Offset Hung Patch Fittings Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

30 DRS Rails, Channels, and DRS Rails DRS Bottom Rails, Locking Default 1/2" (12) unless otherwise specified Square (SQ) DRS Bottom Rail Locking 7422 ( ) Arm Tapered (TP) DRS Bottom Rail Locking 7422 ( ) Arm Standard Finishes $ Custom Finishes $ DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm /109 50/ / / / Profile Ref. # U/M Glass Thickness (25) 2-1/2" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 5/8" (16) TP Ea. /4" (19) TP Ea. 9/16" (14) TP Ea. 11/16" (17) TP Ea. 1/16" (20) (58) -5/8" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) July 19, 2018 Glass Systems and Solutions Price List #28

31 DRS Rails DRS Rails, Channels, and Standard Finishes $ Custom Finishes $ DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm /109 50/ / / / Profile Ref. # U/M Glass Thickness (4) 4" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 9/16" (14) TP Ea. /8" (10) TP Ea. 1/2" (12) TP Ea. 9/16" (14) (6) 6" Rail Height SQ Ea. /8" (10) SQ Ea. 1/2" (12) SQ Ea. 5/8" (16) SQ Ea. /4" (19) SQ Ea. 9/16" (14) SQ Ea. 11/16" (17) SQ Ea. 1/16" (20) (10) 10" Rail Height SQ Ea. /8" (10) ,011 1, ,076 SQ Ea. 1/2" (12) ,011 1, ,076 SQ Ea. 5/8" (16) ,12 1, ,092 1,205 SQ Ea. /4" (19) ,12 1, ,092 1,205 SQ Ea. 9/16" (14) ,099 1, ,06 1,164 SQ Ea. 11/16" (17) ,220 1, ,180 1,29 Laminated Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.805) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering. Rails exceeding 48" (1219) will add a list charge per 12" (05), rounding up the next full foot dimension (i.e. 60" between 48" and 60"). Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. All 108 finish DRS Rails will be provided with black (109) end caps. Reference Options and Prep Charges at the end of rail section. DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

32 DRS Rails, Channels, and Options and Prep Charges Options and Prep Charges Model U/M Ref. # Description /501 CYLXDUMY Cylinder Dummy 4 4 CYLXCYL Cylinder Cylinder CYLXTT Cylinder Thumb Turn TTXDUMY Thumb Turn Dummy 4 4 TTXTT Thumb Turn Thumb Turn CYL Mortise Cylinder for DRS Lock, with split ring TT Mortise Thumb Turn for DRS Lock, with split ring DUMY Mortise Dummy (Blank) Cylinder for DRS Lock, with split ring List $ 8852 Ea /8" (22) End Load Bottom Arm, RTS Ea Bottom Rail Insert for 15 mm Pin Ea Bottom Rail Adjustable Insert 59 BRASSLK 1916 Ea Bottom Rail Brass Door Lock, 1-9/16" (40) (5/8" (16) Throw) 6 BRASSLK 1916L Ea Bottom Rail Brass Door Lock 1-9/16" (7/8" long throw fully retracted projects ¼" below lock base) 50 BRASSLK 178 Ea Bottom Rail Brass Door Lock 1-15/16" (5/8" Throw). Not for use with DRS Rails. Requires 1-15/16" lock height clearance in rail BRASSLK 25 Ea Bottom Rail Brass Door Lock, 1-9/16" (5/8" Throw) Modified for 2-1/2" Rail Only 72 BRASSLK 1916L 25 Ea Bottom Rail Brass Door Lock 1-9/16" (7/8" long throw fully retracted projects 1/4" below lock base) Modified for 2-1/2" Rail Only LGAA Ea M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 0 LGA Ea M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 78 MTIPS Set M Scotch-Weld EPX plus II mixing square nozzle, 5. mm (4 tips per set) 10 List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device in rail 75 ELCK PREP dormakaba EMSL Shearlock, or EML Magnetic Lock armature preparation and installation in DRS rail 165 HDWPREP Prep and Install of non-standard dormakaba hardware (i.e., offset pivots, arms, etc.) in DRS rail 75 CMP HDWP Competitors hardware only prep. in DRS rail (charge may be reviewed based on complexity) 90 CMP HDWI Competitors hardware preparation and installation in DRS rails 150 CMP SHEAR Competitors Electro-Magnetic Shear Lock or Magnetic Lock Armature Preparation only in DRS rails 250 MITER Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M July 19, 2018 Glass Systems and Solutions Price List #28

33 DRS DRS Rails, Channels, and DRS Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / / DRS Rails, Channels & 2-1/2" Square Rail Covers Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) Ft. Anodized (5/8" 1/16" [16 20]) Ft. Cladded (5/8" 1/16" [16 20]) /2" Tapered Rail Covers Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) Ft. Anodized (5/8" 1/16" [16 20]) Ft. Cladded (5/8" 1/16" [16 20]) Patch Fittings & Designer Pivots Offset Hung Patch Fittings -5/8" Square Rail Cover Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) Ft. Anodized (5/8" 1/16" [16 20]) Ft. Cladded (5/8" 1/16" [16 20]) /8" Tapered Rail Cover Headers & Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) " Square Rail Cover Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) " Tapered Rail Cover 6" Square Rail Cover Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) Ft. Anodized (5/8" 1/16" [16 20]) Ft. Cladded (5/8" 1/16" [16 20]) " Square Rail Cover 199/ Ft. Anodized (/8" 9/16" [8 14]) Ft. Cladded (/8" 9/16" [8 14]) Ft. Anodized or Cladded (5/8" 11/16" [16 20]) MANET Sliding Pulls & Closers & Systems Handles 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Panic NOTES: Must specify length when ordering. dormakaba will cut to specified size, priced per foot (ft.) only. Maximum length for extrusion is 144" (.7 m) before requiring splice/joint; 120" ( m) for brass or bronze finish. -5/8" SQ End Cap available Select Service in 101, 108, and 700; 4" SQ End Cap available in 101 and 700. Glass Systems and Solutions Price List #28 July 19,

34 DRS Rails, Channels, and DRS Standard Finishes $ Custom Finishes $ 101/109 50/599/600/ / / Model Ref. # U/M Description 2-1/2" Square Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) /2" Tapered Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) /8" Square Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) /8" Tapered Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) " Square Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) " Tapered Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) " Square Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) " Square Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized & Cladded (5/8" 11/16" [16 27]) / Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order 200 NOTES: -5/8" SQ End Cap available Select Service in 101, 108, and 700; 4" SQ End Cap available in 101 and 700. End caps not available in true stainless steel. 500/501 Satin/Polished Chrome end caps supplied when 700/701 finish rails are ordered. 619 satin nickel and 618 polished nickel supplied in place of 700 satin stainless and 701 polished stainless respectively. 24 July 19, 2018 Glass Systems and Solutions Price List #28

35 DRS DRS Rails, Channels, and Standard Finishes $ Custom Finishes $ / / / Model Ref. # U/M Description DRS Dri-Fit Vertical Stile* Ea. /8" (10) DRS Rails, Channels & Ea. 1/2" (12) * Vertical stiles for both glass thicknesses are priced as one (1) length and include end load cap and Dri-Fit gasket. Maximum length of 144" (658) anodized or 120" (048) clad. 1-1/8" (29) 1-7/8" (48) wide. Requires Weather Brush or Seal. Patch Fittings & Designer Pivots List $ Weather Brush or Weather Seal Ft. Weather Brush Ft. Weather Seal (Vinyl) 2 Offset Hung Patch Fittings DRS Sidelite Rail Shim Ea. Stacking Glass Shim (no finish required) 2 Headers & Rail Saddles and Thresholds Ft. Saddle 1/8" Head Typical 1/8" 1/4" /4" /8" 1/2" Ft. Saddle 1/8" Head Typical -5/8" 10" /2" Ft. Saddle 1/4" -5/8" 10" Ft. Saddle 1/4" 2-1/2" Ft. Saddle /4" -5/8" 10" Ft. Saddle /4" 2-1/2" Ft. Saddle /8" -5/8" 10" Ft. Saddle /8" 2-1/2" Ft. Saddle 1/2" -5/8" 10" Ft. Saddle 1/2" 2-1/2" Ft. 1/2" 4" Threshold 16' Length 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 14 MANET Sliding Pulls & Closers & Systems Handles NOTE: DRS 10" Rails will project 1/2" (I) at both leading edges beyond the vertical door surface if combined with dormakaba Vertical Stiles. Panic Glass Systems and Solutions Price List #28 July 19,

36 DRS Rails, Channels, and Dri-Fit Sidelite Rails Dri-Fit Sidelite Rails Ordering Guide SDLT 58 5-/4 SQ 1/2 101 EC2 0 SDLT Model Less Covers Ordered Less Covers or Cladding NO 2-1/2" Sidelite Rail -5/8" Sidelite Rail 4" Sidelite Rail 6" Sidelite Rail 10" Sidelite Rail Rail Height Rail Length Specify Sidelite Profile TP SQ 1/2" Glass /8" Glass 9/16" Glass 5/8" Glass² 11/16" Glass /4" Glass 1/16" Glass Tapered Rail 1 Square Rail 1/2 /8 9/16 5/8 11/16 /4 1/16 Glass Thickness 1 Tapered Rail (TP) available with 2-1/2", -5/8", and 4" rails. 2 5/8" and /4" glass available only with 2-1/2", -5/8", 6", and 10" rails. dormakaba reserves the right to refuse Custom Finishes. 4 All Custom Finishes require customer sign-off/approval of color chip. No End Caps for Rail End Cap for Rail (2 each) End Cap for Rail (1 each) Standard Finish EC2 EC1 Finish Custom, 4 Saddle Height /8 End Cap Miter /4 NONE 0 1/4 Clear Anodized (CL) Dark Bronze (DB) Black Anodized (BK) Polished Brass without Lacquer (PB) Satin Brass w/o Lacquer (SB) Satin Bronze w/o Lacquer (SBZ) Polished Bronzed w/o Lacquer (PB2) Satin Stainless Steel (SS/US2D) Polished Stainless Steel (PS/US2) 1 2 1/2 1/8 NO Custom Anodized (Specify) Custom Cladding (Specify) Custom Paint or Powder Coat (Specify) Saddle Finish 100 Mill Aluminum Black Aluminum July 19, 2018 Glass Systems and Solutions Price List #28

37 Dri-Fit Sidelite Rails DRS Rails, Channels, and DRS Dri-Fit Sidelite Rails DRS Dri-Fit Sidelite Rails Profile Ref. # U/M Glass Thickness 101/ Standard Finishes $ Custom Finishes $ 50/ / / / DRS Rails, Channels & Note: Dri-Fit gasket shipped installed for cut to length orders; shipped loose for full length orders. (25) 2-1/2" Rail Height SQ Ft. /8" (10) Ln SQ Ft. 1/2" (12) & 9/16" (14) Ln SQ Ft. 5/8" (16) & 11/16" (17) Ln SQ 24.2 Ft. /4" (19) & 1/16" (20) Ln TP Ft. /8" (10) Ln TP Ft. 1/2" (12) & 9/16" (14) Ln TP Ft. 5/8" (16) & 11/16" (17) Ln TP Ft. /4" (19) & 1/16" (20) Ln (58) -5/8" Rail Height SQ Ft. /8" (10) Ln SQ Ft. 1/2" (12) & 9/16" (14) Ln SQ Ft. 5/8" (16) & 11/16" (17) Ln SQ Ft. /4" (19) & 1/16" (20) Ln TP Ft. /8" (10) Ln TP Ft. 1/2" (12) & 9/16" (14) Net Add $ GASKET Install gasket charge for stock length sidelite rails and DriFit U-channel 6 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTE Maximum length for Dri-Fit Channel is 148" (759) for anodized finishes, 144" (658) for stainless steel, and 120" ( m) for brass or bronze finishes before requiring a splice/joint. Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

38 DRS Rails, Channels, and Dri-Fit Sidelite Rails DRS Dri-Fit Sidelite Rails Standard Finishes $ Custom Finishes $ DRS Dri-Fit Sidelite Rails 101/ / / / / Profile Ref. # U/M Glass Thickness Ln Note: Dri-Fit gasket shipped installed for cut to length orders; shipped loose for full length orders. (4) 4" Rail Height SQ Ft. /8" (10) Ln SQ Ft. 1/2" (12) & 9/16" (14) Ln TP Ft. /8" (10) Ln TP Ft. 1/2" (12) & 9/16" (14) Ln (6) 6" Rail Height SQ Ft. /8" (10) Ln SQ Ft. 1/2" (12) & 9/16" (14) Ln SQ Ft. 5/8" (16) & 11/16" (17) Ln SQ Ft. /4" (19) & 1/16" (20) Ln (10) 10" Rail Height SQ Ft. /8" (10) Ln SQ Ft. 1/2" (12) & 9/16" (14) Ln SQ Ft. 5/8" (16) & 11/16" (17) Ln SQ Ft. /4" (19) Ln Net Add $ GASKET Install gasket charge for stock length sidelite rails and DriFit U-channel 6 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTE Maximum length for Dri-Fit Channel is 148" (759) for anodized finishes, 144" (658) for stainless steel, and 120" ( m) for brass or bronze finishes before requiring a splice/joint. 28 July 19, 2018 Glass Systems and Solutions Price List #28

39 Dri-Fit Sidelite Rails DRS Rails, Channels, and DRS Dri-Fit Sidelite Rail Options and Model Ref. # U/M Description Standard Finishes $ Custom Finishes $ 101/109 50/599/600/ / / DRS Rails, Channels & 2-1/2" Square Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) /2" Tapered Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) /8" Square Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) /8" Tapered Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) " Square Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. 4" Tapered Sidelite Rail End Caps Cladded (/8" 9/16" [8 14]) Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Model U/M Ref. # Description List $ SADDLE 1/8 () Ft Saddle for 1/8" height N/C SADDLE /8 (10) and Ft Saddle for /8" and 1/2" height N/C 1/2 (12) SADDLE 1/4 (6) and Ft Saddle for 1/4" and /4" height N/C /4 (19) LSDL Ft. Less saddle per ft Deduct 5 MITER Ea. Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES -5/8" SQ End Cap available Select Service in 101, 108, and 700; 4" SQ End Cap available in 101 and 700. End caps not available in true stainless steel. 500/501 Satin/Polished Chrome end caps supplied when 700/701 finish rails are ordered. NOTES: If saddle is purchased individually, saddle is $7 list per ft. Prices shown above are for saddles supplied with sidelite. Specify sidelite rail cut length, glass thickness, saddle height, and finish when ordering. Cut length of sidelite rail does not include end caps. Allow /16" per end cap ordered. Endcaps NOT included, please specify quantity required per sidelite. Saddle, gasket, and setting block included with each sidelite. Pricing per sidelite is per foot (ft). Maximum length for sidelite is 144" (.7 m) before requiring splice/joint; 120" ( m) for brass or bronze finish. Panic Glass Systems and Solutions Price List #28 July 19,

40 DRS Rails, Channels, and Dri-Fit Sidelite Rails Option & DRS Dri-Fit Sidelite Rail Options and Standard Finishes $ Custom Finishes $ 101/109 50/599/600/ / / " Square Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) Ea. Anodized (5/8" 1/16" [16 20]) Ea. Cladded (5/8" 1/16" [16 20]) " Square Sidelite Rail End Caps Ea. Anodized (/8" 9/16" [8 14]) Ea. Cladded (/8" 9/16" [8 14]) / Ea. Anodized or Cladded (5/8" 11/16" [16 17) Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES -5/8" SQ End Cap available Select Service in 101, 108, and 700; 4" SQ End Cap available in 101 and 700. End caps not available in true stainless steel. 500/501 Satin/Polished Chrome end caps supplied when 700/701 finish rails are ordered. 0 July 19, 2018 Glass Systems and Solutions Price List #28

41 U-Channels & Sidelite DRS Rails, Channels, and Glazing and Dri-Fit U-Channels and Sidelite Standard Finishes $ Custom Finishes $ Ref. # U/M Description /99 Glazing U-Channel Ft. 1" 1" U-Channel bright silver anodized 6 25 DRS Rails, Channels & Ft. 1" 2" U-Channel bright silver anodized 9 29 Patch Fittings & Designer Pivots Standard Finishes $ Custom Finishes $ Ref. # U/M Description 101/ /599/600/ / / Offset Hung Patch Fittings Note: Dri-Fit gasket shipped installed for cut to length orders; shipped loose for full length orders. Dri-Fit Channel for /8" and 1/2" Glass Ft. 1" 1" Dri-Fit Ln. Anodized (Gasket Included) Ft. Cladded (Gasket Included) Headers & Ln Ft. 1" 1-/4" Dri-Fit Ln. Anodized (Gasket Included) Ft. Cladded (Gasket Included) Ln Dri-Fit Channel for 5/8" and /4" Glass Ft. 1-1/4" 1" Dri-Fit Ln. Anodized (Gasket Included) Ft. Cladded (Gasket Included) Ln Ft. 1-1/4" 1-/4" Dri-Fit Ln. Anodized (Gasket Included) Ft. Cladded (Gasket Included) Ln Dri-Fit Channel for /8" and 1/2" Glass with mounting holes pre-drilled Ln. 1" 1" Dri-Fit Anodized (Gasket Included; Shipped Loose) Ln. 1" 1-/4" Dri-Fit Anodized (Gasket Included; Shipped Loose) MANET Sliding Pulls & Closers & Systems Handles NOTE Maximum length for Dri-Fit Channel is 148" (759) for anodized finishes (minimum useable length of 144"); 144" (658) for stainless steel, and 120" ( m) for brass or bronze finish before requiring splice/joint. Gasket shipped loose with full lengths unless otherwise requested (prep charge). Full lengths of , , , and in 11 finish are 144" with gasket shipped loose. Panic Glass Systems and Solutions Price List #28 July 19,

42 DRS Rails, Channels, and U-Channels & Sidelite Glazing and Dri-Fit U-Channels and Sidelite Standard Finishes $ Custom Finishes $ 101/ /99 Ref. # U/M Description Dri-Fit Channel for 5/8" and /4" Glass with mounting holes pre-drilled Ln. 1-1/4" 1" Dri-Fit Anodized (Gasket Included; Shipped Loose) Ln. 1-1/4" 1-/4" Dri-Fit Anodized (Gasket Included; Shipped Loose) Dri-Fit Channel End Cap (Snap Fit) 80 (Black) 807 (Grey) Ea. End cap for both 1" 1" and 1" 1-/4" (Gasket Required) Ea. End cap for both 1-1/4" 1" and 1-1/4" 1-/4" (Gasket Required) 5 5 Dri-Fit Channel Gasket (Gasket is included in Dri-Fit U-Channel and requires 2-1 length vs. U-channel) List $ Ft. Gasket for Vertical Stiles, /8" (10) and 5/8" (16) Glass Ft, Gasket for DRS, Sidelite Rails, and Dri-fit U-Channel, /8" (10) and 5/8" (16) Glass NOTE: Gasket shipped loose with stock length Sidelite Rails and Dri-Fit U-Channel Ft. Gasket for Vertical Stiles, 1/2" (12) and /4" (19) Glass Ft. Gasket for DRS, Sidelite Rails, and Dri-fit U-Channel, 1/2" (12) and /4" (19) Glass NOTE: Gasket shipped loose with stock length Sidelite Rails and Dri-Fit U-Channel. 1 GASKET Install gasket charge for stock length DriFit U-channel 6 MITER Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES Must specify length when ordering. dormakaba will cut to specified size, priced per foot (Ft.) only. Maximum length for extrusion is 144" (.7 m) before requiring splice/joint; 120" ( m) for brass or bronze finish. 2 July 19, 2018 Glass Systems and Solutions Price List #28

43 DRS DRS Rails, Channels, and DRS Model Ref. # U/M Description List $ DRS Rail Locks Ea. Brass Lock 1-9/16" 5/8" Throw 6 1 DRS Rails, Channels & Ea. Bottom Rail Brass Door Lock 1-9/16" (7/8" long throw fully retracted projects ¼" below lock base) Ea. Brass Lock 1-15/16" 5/8" Throw. Not for use with DRS Rails. Requires 1-15/16" lock height clearance in rail Ea. Brass Door Lock, 1-9/16" (5/8" Throw) Modified for 2-1/2" Rail Only Patch Fittings & Designer Pivots Ea. Bottom Rail Brass Door Lock 1-9/16" (7/8" long throw fully retracted projects ¼" below lock base) Modified for 2-1/2" Rail Only 84 Offset Hung Patch Fittings Ea. Extended Lock Bolt 7/8" Throw Ea. Square Lock Bolt Ea. Dust Proof Strike Overall Length 1-1/2" /501 50/ / Ea. Strike Plate Finishes $ /501 Cylinders 1 BTS Offset Arms and Pivots Ea. Mortise cylinder for DRS lock, w/split ring. (If cylinder requires Master Keying, lead time is Special Order ) Ea. Mortise Thumb-Turn for DRS Lock, w/split ring Ea. Mortise Dummy (blank) Cylinder for DRS Lock, w/split ring Ea. /4" Offset Top Pivot (75120) (Specify Hand) (Primer) / /501 50/ /601/ Headers & MANET Sliding Pulls & Closers & Systems Handles NOTE: Cylinders supplied as Keyed Different (KD). For the Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Panic Glass Systems and Solutions Price List #28 July 19, 2018

44 DRS Rails, Channels, and DRS BTS Offset Arms and Pivots Ea. 1-1/2" Offset Top Pivot (15120) (Specify Hand) 14 (Primer) / /501 50/ /601/ Finishes $ Model Ref. # U/M Description /109 50/ /501 BTS Offset Arms and Pivots RH Ea. LH Ea. 752 /4" Offset Bottom Arm, BTS RH Ea. LH Ea /2" Offset Bottom Arm, BTS LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE RTS88 Arms and Pivots Ea /8" End Load Top Arm, RTS Ea Slide Arm for RTS Independent Hung Doors Ea. 886S 7/8" End Load Top Arm, Glass Door Shoe, RTS Ea. 8062LOWER CH Top Walking Beam Pivot, Rail Portion Only Ea. HD8062LOWER Heavy-Duty CH Walking Beam Top Pivot, Rail Portion Only 90 4 July 19, 2018 Glass Systems and Solutions Price List #28

45 Mechanical Channel & Endcaps DRS Rails, Channels, and DRS Options Option Description List $ HDWPREP Prep and installation of non-standard dormakaba hardware (i.e., offset pivots, arms, etc.) in DRS rail 75 CMP HDWP Competitors hardware prep (charge may be reviewed based on complexity) 90 CMP HDWI Competitors hardware preparation and installation 150 CMP SHEAR Competitors Electro-Magnetic Shear Lock or Magnetic Lock Armature prep 250 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. DRS Rails, Channels & Patch Fittings & Designer Pivots Mechanical Channel and Endcap Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description */ / Offset Hung Patch Fittings Mechanical Channel Cover (No Glass Fabrication Required) Ft. Clip-On Cover 157" (4 m) max. length Ft. Clip-On Cover 157" (4 m) max. length 7 12* Headers & *108 cover max. length is 118" ( m). Mechanical Channel Endcap Ea. Endcap /8" 1/2" (10 12) Ea. Endcap 19/2" /4" (15 19) 22 Mechanical Channel Base (No Glass Fabrication Required) 100 Mechanical Channel Clamps Ft. /8" (10) Base mechanical channel (157" [4 m] max. length) and clamps Ft. 1/2" (12) Base mechanical channel (157" [4 m] max. length) and clamps Ft. 5/8" (15) Base mechanical channel (157" [4 m] max. length) and clamps Ft. /4" (19) Base mechanical channel (157" [4 m] max. length) and clamps Ea. /8" (10) Ea. 1/2" (12) Ea. /4" (19) Ea. 5/8" (15) Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 MANET Sliding Pulls & Closers & Systems Handles Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES Base mechanical channel includes clamp brackets, first foot pulls two clamps and each remaining foot pulls one clamp per foot. Mechanical channel is not recommended for use with laminated glass. Max. length of mechanical channel cover in 108 finish is 118" ( m). Panic Glass Systems and Solutions Price List #28 July 19,

46 DRS Rails, Channels, and DRS Rails 6 July 19, 2018 Glass Systems and Solutions Price List #28

47 Table of Contents Patch Fittings and Designer Pivots Center Hung Patch Fittings and Designer Pivots Select Service 8 MUNDUS Center Hung Patch Fittings Ordering Guide 40 MUNDUS Premium & Comfort Patch Fittings/Transom & Sidelite Patch Fittings 41 MUNDUS Premium Patch Fittings/Transom & Sidelite Patch Fittings 4 Replacement Parts Universal Center Hung Patch Fittings Universal Center Hung Patch Fittings/Transom, Sidelite & Fin Patch Fittings 50 Connectors Options 58 Standard Sets 60 Designer Pivots TENR Designer Pivot/Hinge 61 VISUR Designer Pivot 62 BEYOND Pinch-Free Pivot 6 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Panic MANET Sliding Pulls & Closers & Systems Handles Glass Systems and Solutions Price List #28 July 19,

48 Patch Fittings and Designer Pivots Select Service Select Service Quick Ship Patch Fittings and Designer Pivots Universal patch fittings are the only Select Service fittings available at this time. Select service should be used for small quantities of popular dormakaba products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: dormakaba receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. dormakaba receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. dormakaba reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to dormakaba. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Products and prices are subject to change without notice. Limited quantities available. Key N "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse E W Available only in East Coast Warehouse Available only in West Coast Warehouse 8 July 19, 2018 Glass Systems and Solutions Price List #28

49 Select Service Patch Fittings and Designer Pivots Patch Fittings and Designer Pivots /8" (10) to 1/2" (12) Glass 2-/4" (70) pivot location DRS Rails, Channels & PN # Warehouse Product Description Location Glass Finish List $ SS PT20 Use with PT21 WBP Top patch 1/2" (12) SS E PT20 Use with PT21 WBP Top patch 1/2" (12) SS PT20 Use with PT21 WBP Top patch 1/2" (12) SS E PT20 Use with PT21 WBP Top patch 1/2" (12) SS PT22 Use with RTS Top patch 1/2" (12) SS E PT22 Use with RTS Top patch 1/2" (12) SS PT22 Use with RTS Top patch 1/2" (12) SS E PT22 Use with RTS Top patch 1/2" (12) SS PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" (12) SS E PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" (12) SS PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" (12) SS E PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" (12) SS PT20 Use with PT21 WBP Top patch /4" (19) SS E PT20 Use with PT21 WBP Top patch /4" (19) SS PT20 Use with PT21 WBP Top patch /4" (19) SS E PT20 Use with PT21 WBP Top patch /4" (19) SS PT22 Use with RTS Top patch /4" (19) SS E PT22 Use with RTS Top patch 1/2" (12) SS PT22 Use with RTS Top patch 1/2" (12) SS E PT22 Use with RTS Top patch 1/2" (12) SS PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" (19) SS E PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" (19) SS PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" (19) SS E PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" (19) Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

50 Patch Fittings and Designer Pivots MUNDUS Ordering Guide MUNDUS Patch Fittings Ordering Guide Product MUNDUS Fitting PT10 PT20 PT22 PT0 PT40 PT41 PT60 PT61 PT70 Bottom Patch Top Patch Blank Stop Pivot MUNDUS PT10 5/16 1/2 60 5/16" 1/2" (8 12) Glass 9/16" (14) Laminate 5/8" /4"(15 19) Glass 11/16" (17) Laminate 1/16" 7/8" (19 22) Laminate Top Patch, RTS Transom Patch Transom & Sidelite Patch Transom & Sidelite Patch Premium Connector Premium Connector Premium Transom Connector 5/16 1/2 9/16 5/8 /4 11/16 1/16 7/8 Glass Thickness Insert BLANK STOP PIVOT Clear Anodized Dark Bronze Black Anodized Satin Brass Satin Stainless Steel Polished Stainless Steel Black Glass Standard Finish Custom Anodized (Specify) Custom Cladding (Specify) 99 1, 2, Custom Finish Custom Coated (Specify) 1 For custom 199, 299, or 99 finishes, there may be minimum order quantities based on minimum lot charges. Lead time will be extended. 2 dormakaba reserves the right to refuse Custom Finishes. All Custom Finishes require customer sign-off/approval of color chip. 40 July 19, 2018 Glass Systems and Solutions Price List #28

51 MUNDUS Center Hung Patch Fittings Patch Fittings and Designer Pivots MUNDUS Premium & Comfort Patch Fittings 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Model Ref. # U/M Description Bottom Patch PT10 (BTS, 7471K, 55.5, or 55.6) 628 (101*) 710/711 (108/109*) Standard Finishes $ Custom Finishes $ 728 (599*) 629/60 (700/701*) / Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Top Patch PT20 (PT21M, PT24M, PT25M, or MUNDUS PT0, 40, 41 with Pivot) Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Top Patch PT22 (RTS) Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Transom Patch PT0 with Pivot Ea. 1/16" & 7/8" (19 & 22) TLG Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Transom Patch PT0 with Stop 88.0 Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Note: PT0 comes with the wall plate (default) unless the Wall Anchor or Threaded Rod Anchor is requested. DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 * Old DORMA finish code NOTES: MUNDUS Premium reference numbers start with 842. MUNDUS Comfort reference numbers start with 88. Replacement part numbers do not correspond to "Premium" or "Comfort". All measurements are shown in inches (mm); for example /8" (10) See pages 76 and 87 for MUNDUS Header options Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Panic Glass Systems and Solutions Price List #28 July 19,

52 Patch Fittings and Designer Pivots MUNDUS Center Hung Patch Fittings MUNDUS Premium & Comfort Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description 628 (101*) 710/711 (108/109*) 728 (599*) 629/60 (700/701*) / Transom Patch PT0 with Blank Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Note: PT0 comes with the wall plate (default) unless the Wall Anchor or Threaded Rod Anchor is requested. Transom/Sidelite Patch Fitting PT40 with Pivot Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Transom/Sidelite Patch Fitting PT40 with Stop Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Transom/Sidelite Patch Fitting PT40 with Blank Ea. 5/16" 1/2" (8 12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15 & 19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19 & 22) TLG Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 * Old DORMA finish code Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: MUNDUS Premium reference numbers start with 842. MUNDUS Comfort reference numbers start with 88. Replacement part numbers do not correspond to"premium" or "Comfort". Epoxy and applicator tips are included in 9/16 (14), 11/16 (17), and 1/16 7/8 (19 22) fittings. All measurements are shown in inches (mm); for example /8 (10). 42 July 19, 2018 Glass Systems and Solutions Price List #28

53 MUNDUS Center Hung Patch Fittings Patch Fittings and Designer Pivots MUNDUS Premium Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ DRS Rails, Channels & Model Ref. # U/M Description 628 (101*) 710/711 (108/109*) 728** (599*) 629/60 (700/701*) / Transom/Sidelite/Fin Patch Fitting PT41 with Pivot (19.), Left Ea. 5/16" to 1/2" (8-12) Patch Fittings & Designer Pivots Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Offset Hung Patch Fittings Transom/Sidelite/Fin Patch Fitting PT41 with Stop (55.42), Left Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Headers & Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 * Old DORMA finish code ** 8 weeks lead time for finish Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Patch Fitting PT41 with Blank (55.4), Left Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Patch Fitting PT41 with Pivot (19.), Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG NOTES: MUNDUS Premium reference numbers start with 842. MUNDUS Comfort reference numbers start with 88. Replacement part numbers do not correspond to"premium" or "Comfort". Epoxy and applicator tips are included in 9/16 (14), 11/16 (17), and 1/16 7/8 (19 22) fittings. All measurements are shown in inches (mm); for example /8 (10). Special Fabricated/Finish or Special Order; lead time up to 5 weeks. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

54 Patch Fittings and Designer Pivots MUNDUS Center Hung Patch Fittings MUNDUS Premium Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description 628 (101*) 710/711 (108/109*) 728** (599*) 629/60 (700/701*) / Transom/Sidelite/Fin Patch Fitting PT41 with Stop (55.42), Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Patch Fitting PT41 with Blank (55.4), Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Patch Fitting PT41 with Pivot (19.), Left & Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Patch Fitting PT41 with Stop (55.42), Left & Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Patch Fitting PT41 with Blank (55.4), Left & Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES: MUNDUS Premium reference numbers start with 842. MUNDUS Comfort reference numbers start with 88. Replacement part numbers do not correspond to"premium" or "Comfort". Epoxy and applicator tips are included in 9/16 (14), 11/16 (17), and 1/16 7/8 (19 22) fittings. All measurements are shown in inches (mm); for example /8 (10). * Old DORMA finish code ** 8 weeks lead time for finish 728. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 44 July 19, 2018 Glass Systems and Solutions Price List #28

55 MUNDUS Center Hung Patch Fittings Patch Fittings and Designer Pivots MUNDUS Premium Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ DRS Rails, Channels & Model Ref. # U/M Description 628 (101*) 710/711 (108/109*) 728** (599*) 629/60 (700/701*) / Transom/Sidelite Connector PT60 with 1 Stop, 2 Blanks Ea. 5/16" to 1/2" (8-12) Patch Fittings & Designer Pivots Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Offset Hung Patch Fittings Transom/Sidelite/Fin Connector PT61 - Left Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Headers & Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Connector PT61 - Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom/Sidelite/Fin Connector PT61 - Left & Right Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG Ea. 1/16" & 7/8" (19-22) TLG Transom Connector PT70 with 2 Ea. Stops/Blanks Ea. 5/16" to 1/2" (8-12) Ea. 9/16" (14) TLG Ea. 5/8" & /4" (15-19) Ea. 11/16" (17) TLG MANET Sliding Pulls & Closers & Systems Handles Ea. 1/16" & 7/8" (19-22) TLG Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES: MUNDUS Premium reference numbers start with 842. * Old DORMA finish code ** 8 weeks lead time for finish 728. MUNDUS Comfort reference numbers start with 88. Replacement part numbers do not correspond to"premium" or "Comfort". Epoxy and applicator tips are included in 9/16 (14), 11/16 (17), and 1/16 7/8 (19 22) fittings. All measurements are shown in inches (mm); for example /8 (10). Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19, Panic

56 Patch Fittings and Designer Pivots MUNDUS Center Hung Patch Fittings MUNDUS Premium & Comfort Patch Fittings Replacement Parts Model Ref. # U/M Description Standard Finishes $ Custom Finishes $ 628 (101*) 710/711 (108/109*) 728 (599*) 60/629 (700/701*) / Cover Patch Fittings Pr. Cover, patch fitting. Use with PT Pr. Cover, patch fitting. Use with PT10, PT20, PT Pr. Cover, patch fitting. Use with PT Pr. Cover, patch fitting. Use with PT Patch Fitting Inserts List $ Ea. Insert for PT10, 5/16" 1/2" (8 12). Use with BTS, 7417K, 55.5 or Ea. Insert for PT10, 9/16" (14). Use with BTS, 7417K, 55.5 or Ea. Insert for PT10, 5/8" /4" (16 19). Use with BTS, 7417K, 55.5 or Ea. Insert for PT10, 1/16" 7/8" (20 22). Use with BTS, 7417K, 55.5 or Ea. Insert for PT20, 5/16" 1/2" (8 12). Use with PT21M, PT24M, PT25M, or MUNDUS PT0, 40, 41 w Pivot Ea. Insert for PT20, 9/16" (14). Use with PT21M, PT24M, PT25M, or MUNDUS PT0, 40, 41 w Pivot Ea. Insert for PT20, 5/8" /4" (16 19). Use with PT21M, PT24M, PT25M, or MUNDUS PT0, 40, 41 w Pivot Ea. Insert for PT20, 1/16" 7/8" (20 22). Use with PT21M, PT24M, PT25M, or MUNDUS PT0, 40, 41 w Pivot Ea. Insert for PT22, sideload. 5/16" 1/2" (8 12) Ea. Insert for PT22, sideload. 9/16" (14) Ea. Insert for PT22, sideload. 5/8" /4" (16 19) Ea. Insert for PT22, sideload. 1/16" 7/8" (20 22) Ea. Insert for PT0, PT40, PT41, Pivot, 5/16" 1/2" (8 12) Ea. Insert for PT0, PT40, PT41, Pivot, 9/16" (14) Ea. Insert for PT0, PT40, PT41, Pivot, 5/8" /4" (16 19) Ea. Insert for PT0, PT40, PT41, Pivot, 1/16" 7/8" (20 22) 119 * Old DORMA finish code Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 46 July 19, 2018 Glass Systems and Solutions Price List #28

57 MUNDUS Center Hung Patch Fittings Patch Fittings and Designer Pivots MUNDUS Premium & Comfort Patch Fittings Replacement Parts & Model Ref. # U/M Description List $ DRS Rails, Channels & Ea. Insert for PT0, & PT40, Stop. 5/16" 7/8" (8 22) Ea. Insert for PT0, & PT40, Blank. 5/16" 9/16" (8 14) 54 Patch Fittings & Designer Pivots Ea. Insert for PT0, & PT40, Blank. 5/8" 7/8" (16 22) 6 Gaskets St. Gasket for use with PT10, PT20, PT22, PT0 fittings (MUNDUS) 8 Offset Hung Patch Fittings St. Gasket for use with PT40 (MUNDUS) 1 Headers & St. Tempered Laminate Gasket for use with PT10, PT20, PT22, PT0 fittings St. Tempered Laminate Gasket for use with PT40 17 Tempered Laminated Glass (TLG) Fitting Plates Ea. M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 20 fittings Ea. M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger Ea. M Scotch-Weld EPX plus II mixing square nozzle, 5.; 4 tips per set (each tip supports 2 fittings/1 door) Pr. MUNDUS Comfort Fitting Plates for PT10, PT20, PT22 (5/16 1/2 [8 12]) MANET Sliding Pulls & Closers & Systems Handles Pr. MUNDUS Comfort Fitting Plates for PT0 (5/16 1/2 [8 12]) 61 Panic Glass Systems and Solutions Price List #28 July 19,

58 Patch Fittings and Designer Pivots MUNDUS Center Hung Patch Fittings MUNDUS Premium & Comfort Patch Fittings Fitting Plates List $ Pr. MUNDUS Comfort Fitting Plates for PT40 (5/16 1/2 [8 12]) Pr. MUNDUS Premium Fitting Plates for PT10, PT20, PT22 (9/16 7/8 [14 22]) Pr. MUNDUS Premium Fitting Plates for PT0 (9/16 7/8 [14 22]) Pr. MUNDUS Premium Fitting Plates for PT40 (9/16 7/8 [14 22]) 141 Standard Finishes $ 695/69 (108/109*) 728 (599*) 60/629 (700/701*) Wall Plate / 88.1 Ea. Wall Plate, MUNDUS PT Wall Anchor or Threaded Rod List $ Ea. Wall Anchor Ea. Threaded Rod Anchor 15 Accessory Packs Pk. Accessory pack for PT10, PT20, PT22, PT0 for 5/16" to 1/2" glass. Single set Pk. Accessory pack for PT10, PT20, PT22, PT0 for 5/16" 9/16" (8 14) glass Pk. Accessory pack for PT10, PT20, PT22, PT0 for 5/8" /4" (16 19) glass Pk. Accessory pack for PT10, PT20, PT22, PT0 for 1/16" 7/8" (20 22) glass Pk. Accessory pack for PT40, PT60 for 5/16" 9/16" (8 14) glass Pk. Accessory pack for PT40, PT60 for 5/8" /4" (16 19) glass Pk. Accessory pack for PT40, PT60 for 1/16" 7/8" (20 22) glass 17 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. * Old DORMA finish code 48 July 19, 2018 Glass Systems and Solutions Price List #28

59 MUNDUS Center Hung Patch Fittings Patch Fittings and Designer Pivots MUNDUS Premium & Comfort Patch Fittings Model Ref. # U/M Description 628 (101*) Standard Finishes $ 710/711 (108/109*) 728 (599*) 60/629 (700/701*) DRS Rails, Channels & Top Pivots Ea. MUNDUS PT21M pivot, Top Walking Beam Pivot, Frame 49 Patch Fittings & Designer Pivots Set MUNDUS PT21M pivot, Top Walking Beam Pivot, Frame & Cover Offset Hung Patch Fittings Ea. MUNDUS PT24M pivot with mounting plate, mortise into ceiling Ea. MUNDUS PT24M pivot with mounting plate, fasten onto ceiling (60 only) Headers & Floor Pivots Ea. MUNDUS PT25M pivot, far right NOTE: For floor pivots, use finish codes shown above in parentheses, e.g. (101) Ea. Complete, Adjustable Floor Pivot 5/16" 1/2 (8 12) Ea. Adjustable Floor Pivot Cover Plate Ea. Floor Pivot 5/16" (8) Clearance Ea. Complete, Floor Pivot with /4" (22) Clearance 18 (no finish) (no finish) MANET Sliding Pulls & Closers & Systems Handles Standard or Non-Standard Fabricated; lead time up to business days. * Old DORMA finish code Panic Glass Systems and Solutions Price List #28 July 19,

60 Patch Fittings and Designer Pivots Universal Center Hung Patch Fittings Universal Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Top Patch PT20 (PT21, 25.6, or 19.) 8.10 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Top Patch PT22 (RTS) 8.12 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Bottom Patch PT10 (BTS, 7471K, or 55.5)) 8.00 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Patch fitting covers for bronze finish are bronze plating over brass base metal. For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. 50 July 19, 2018 Glass Systems and Solutions Price List #28

61 Universal Center Hung Patch Fittings Patch Fittings and Designer Pivots Universal Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Transom Patch PT0 with Pivot (19.) End Cover 5/8" (16) & /4" (19) 8.0 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Transom Patch PT0 with Stop (55.42) 8.2 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) Headers & End Cover 5/8" (16) & /4" (19) Transom Patch PT0 with Blank (55.4) 8.4 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Wall Plate Ea. Wall Plate / / 7 Wall Anchor or Threaded Rod List $ / Ea. Wall Anchor Ea. Threaded Rod Anchor 15 Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. / MANET Sliding Pulls & Closers & Systems Handles NOTES: Patch fitting covers for bronze finish are bronze plating over brass base metal. For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. Panic Glass Systems and Solutions Price List #28 July 19,

62 Patch Fittings and Designer Pivots Universal Center Hung Patch Fittings Universal Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Transom/Sidelite Patch Fitting PT40 with Pivot (19.) 8.4 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Transom/Sidelite Patch Fitting PT40 with Stop (55.42) 8.6 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Transom/Sidelite Patch Fitting PT40 with Blank (55.4) 8.8 Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Ea. /4" (19) End Cover 5/8" (16) & /4" (19) Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Patch fitting covers for bronze finish are bronze plating over brass base metal. For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. 52 July 19, 2018 Glass Systems and Solutions Price List #28

63 Universal Center Hung Patch Fittings Patch Fittings and Designer Pivots Universal Patch Fittings, Complete 2-/4" (70) Pivot Center Line, Center Hung Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Transom/Sidelite/Fin Patch Fitting PT41 with Pivot (19.) End Cover 5/8" (16) & /4" (19) 8.55 LH Ea. /8" (10) RH Ea. /8" (10) LH Ea. 1/2" (12) RH Ea. 1/2" (12) LH Ea. 5/8" (15) RH Ea. 5/8" (15) LH Ea. /4" (19) RH Ea. /4" (19) Transom/Sidelite/Fin Patch Fitting PT41 with Stop (55.42) 8.91 LH Ea. /8" (10) RH Ea. /8" (10) LH Ea. 1/2" (12) RH Ea. 1/2" (12) LH Ea. 5/8" (15) RH Ea. 5/8" (15) LH Ea. /4" (19) End Cover 5/8" (16) & /4" (19) RH Ea. /4" (19) Transom/Sidelite/Fin Patch Fitting PT41 with Blank (55.4) 8.95 LH Ea. /8" (10) RH Ea. /8" (10) LH Ea. 1/2" (12) RH Ea. 1/2" (12) LH Ea. 5/8" (15) RH Ea. 5/8" (15) LH Ea. /4" (19) End Cover 5/8" (16) & /4" (19) RH Ea. /4" (19) Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: LH shown above. Patch fitting covers for bronze finish are bronze plating over brass base metal. All fins are designed for 1/2" (12) glass. Verify with Customer Service to determine if available for other than 1/2" (12). Limited quantities available for business day lead-time. Verify availability at time of order. For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

64 Patch Fittings and Designer Pivots Universal Center Hung Patch Fittings Transom and Sidelite Connectors, Complete 2-/4" (70) Pivot Center Line Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / / Cladding Transom/90 Sidelite Patch Fitting PT42-90 with Pivot, (19.) LH Ea. 1/2" (12) , RH Ea. 1/2" (12) ,217 Transom/Sidelite Connector PT60-61 with Stop and Blank Insert, (2.5) Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Specify thickness (108 only) Ea. /4" (19) Specify thickness (108 only) Transom/Sidelite/Fin Connector PT60-61 (Specify Thickness) LH Ea. /8" (10) RH Ea. /8" (10) LH Ea. 1/2" (12) RH Ea. 1/2" (12) Transom/Sidelite/Stop Connector PT Ea. /8" (10) Ea. 1/2" (12) Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: All fins are designed for 1/2" (12) glass. Verify with Customer Service to determine if available for other than 1/2" (12). For 5/8" (15) and /4" (19) thick glass, a relief cut to the hole preparation will be required. 54 July 19, 2018 Glass Systems and Solutions Price List #28

65 Universal Center Hung Patch Fittings Patch Fittings and Designer Pivots Transom and Sidelite Connectors, Complete 2-/4" (70) Pivot Center Line Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / Cladding Transom Connector PT70 with 2 Ea. Stops/Blanks Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Specify Thickness Ea. /4" (19) Specify Thickness DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Transom/Fin Connector PT Ea. /8" (10) , Ea. 1/2" (12) ,110 Headers & Sidelite Patch Fitting PT Ea. /8" (10) Ea. 1/2" (12) Ea. 5/8" (15) Specify Thickness Ea. /4" (19) Specify Thickness Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: All fins are designed for 1/2" (12) glass. Verify with Customer Service to determine if available for other than 1/2" (12). For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

66 Patch Fittings and Designer Pivots Universal Center Hung Patch Fittings Connector Fittings, Complete Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / / Cladding Connector/Fin Fitting PT Ea. /8" (10) Ea. 1/2" (12) Angled Connector PT Ea. /8" (10) (108 only) Ea. 1/2" (12) (108 ony) Angled Connector PT80-90 Short Ea. /8" (10) (108 only) Ea. 1/2" (12) (108 only) Edge Fitting PT Ea. /8" (10) 27 2 (108 only) Ea. 1/2" (12) 27 2 (108 only) Ea. 5/8" (15) Specify Thickness (108 only) Ea. /4" (19) Specify Thickness (108 only) Corner Fitting PT Ea. /8" (10) 8 45 (108 only) Ea. 1/2" (12) 8 45 (108 only) Ea. 5/8" (15) Specify Thickness (108 only) Ea. /4" (19) Specify Thickness (108 only) Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: All fins are designed for 1/2" (12) glass. Verify with Customer Service to determine if available for other than 1/2" (12). For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. 56 July 19, 2018 Glass Systems and Solutions Price List #28

67 Universal Center Hung Patch Fittings Patch Fittings and Designer Pivots Connectors, Complete, and Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / Cladding Top Patch Fitting PT29 with Wall Mount Pivot Fixing Plate DRS Rails, Channels & 8.14 Ea. /8" (10) Ea. 1/2" (12) NOTE: 2-/16" (55mm) Pivot Center Line Location. Bottom Pivot Must Use Same Pivot Point! Ea. /8" (10) Ea. 1/2" (12) Patch Lock Fitting AR20 Type F Door Ea. /8" (10) Ea. 1/2" (12) Patch Fittings & Designer Pivots Offset Hung Patch Fittings Ea. 5/8" (15) Ea. /4" (19) Headers & Slide-On Bolt, /8" (10) glass only Ea. /4" (19) 92 Extended Bolt, 7/8" Throw Ea. Extended Bolt, 7/8" (22)Throw 14 NOTE: When fully retracted, bolt will remain extended 1/4" (6). Extended Bolt, 7/8" Throw Ea. Square Bolt 6 Standard Finishes $ /501 Cylinders for Patch Fitting Brass Lock Ea. Mortise cylinder for Patch Fitting lock, w/split ring if cylinder requires master keying lead time goes to Special Order () Ea. Mortise Thumbturn for Patch Fitting Lock, w/split ring Ea. Mortise Dummy (blank) Cylinder for Patch Fitting Lock, w/split ring Finishes $ MANET Sliding Pulls & Closers & Systems Handles Model Ref. # U/M Description / /629 60/ Ea. Dust Proof Strike Overall Length 1-1/2" (40) Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: All fins are designed for 1/2" (12) glass. Verify with Customer Service to determine if available for other than 1/2" (12). For 5/8" (16) and /4" (19) thick glass, a relief cut to the hole preparation will be required. Panic Glass Systems and Solutions Price List #28 July 19,

68 Patch Fittings and Designer Pivots Universal Center Hung Patch Fittings Center Hung Patch Fitting Options Standard Finishes $ Ref. # Model Description / No Finish Fitting for PT10, PT20, PT22, /8" (10), or 1/2" (12) glass Fitting for PT10, PT20, PT22, PT0, 5/8" (15), or /4" (19) glass Fitting for PT0, /8" (10), or 1/2" (12) glass Fitting for PT40, /8" (10), or 1/2" (12) glass Fitting for PT40, 5/8" (15), or /4" (19) glass AR20 Patch lock Fitting, /8" (10), 1/2" (12), 5/8" (16), or /4" (19) glass Insert for PT10. Use with BTS, 7471K, or Insert for PT20. Use with PT21, PT24, or PT0 with Pivot Insert for PT22 by RTS, Sideload July 19, 2018 Glass Systems and Solutions Price List #28

69 Universal Center Hung Patch Fittings Patch Fittings and Designer Pivots Center Hung Patch Fitting Options Standard Finishes $ Ref. # Model Description / No Finish Insert with pivot 19. for PT0, PT40, PT41, PT Insert with stop for PT0, PT40, PT41 20 DRS Rails, Channels & Patch Fittings & Designer Pivots Insert with blank for PT0, PT40, PT41 16 Offset Hung Patch Fittings Cover, patch fitting,. Use with PT10, PT20, PT Headers & Cover, end angle, all PT10, PT20, PT22 5/8 (15) or /4" (19) glass N/A Cover, patch fitting. Use with PT N/A Cover, patch fitting. Use with PT N/A Cover, AR20 patch lock fitting for /8" (10) and 1/2" (12) glass Cover, AR20 patch lock fitting for 5/8" (15) and /4" (19) glass Cover, all PT0, PT40, PT41 5/8" (15) or /4" (19) glass Gasket for use with PT40 fittings /8" (10 ) or 5/8" (15) glass N/A NA N/A 4 MANET Sliding Pulls & Closers & Systems Handles Gasket 2 for use with PT10, PT20, PT22, PT0 fittings 1/2" (12) or /4" (19) glass 5 Panic Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Glass Systems and Solutions Price List #28 July 19,

70 Patch Fittings and Designer Pivots Universal Center Hung Patch Fittings Standard Center Hung Patch Fitting Set for Door Fitting, /8" (10 or 1/2" (12) glass, PT10, PT20, PT Fitting, 5/8" (15) or /4" (19) glass, PT10, PT20, PT Insert fitting, PT10 BTS, 7471K or Insert fitting, PT20 PT Insert fitting, PT22 RTS Patch fitting cover, all glass thicknesses, PT10, PT20, PT End cover, requested for 5/8 (15) or /4" (19) glass thicknesses, PT10, PT20, PT22 Standard Center Hung Patch Fitting Set for Transom PT0 Patch Fitting Guide Fitting, /8" (10) or 1/2" (12) glass, PT Fitting, 5/8" (15) or /4" (19) glass, PT Insert fitting, PT0 PT Insert fitting, PT0 when used as stop Insert fitting, PT0 double acting door Patch fitting cover, all glass thicknesses, PT Cover PT0, 40, 41 5/8" (15), /4" (19) glass for 5/8" (15) or /4" (19) glass thicknesses, PT0 60 July 19, 2018 Glass Systems and Solutions Price List #28

71 TENR Designer Pivot/Hinge Patch Fittings and Designer Pivots TENR Designer Pivot/Hinge Finishes $ DRS Rails, Channels & Model Ref. # U/M Description TENR Glass to Wall Pr. /8" (10) or 1/2" (12) 1,14 1,161 Patch Fittings & Designer Pivots TENR Glass to Glass Offset Hung Patch Fittings Pr. /8" (10) or 1/2" (12) 1,492 1,541 Panic Headers & MANET Sliding Pulls & Closers & Systems Handles Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19,

72 Patch Fittings and Designer Pivots VISUR Designer Pivot VISUR Designer Pivot Center Hung Double-Acting All-Glass Door System Safe pinch-free glass door operation for /8" and 1/2" (10 and 12) glass Finish $ Model Ref. # U/M Description 114 VISUR Complete Sets Set VISUR complete set for single door includes header tube, RTS 88, top and bottom pivot. Please indicate finished opening width Set VISUR complete set for pair of doors includes header tube, RTS 88, top and bottom pivot. Please indicate finished opening width. 1,719,48 VISUR Components Ea. VISUR set composed of RTS 88, top and bottom pivot. 1, Ea. VISUR set composed of top and bottom pivot (without RTS 88) Ea Ea. VISUR header tube profile for single door. Max. 4-/8" (1100) door panel width. Please indicate finished opening width. VISUR header tube profile for pair of doors. Max. 2 4-/8" (1100) door panel width. Please indicate finished opening width Ea. VISUR header tube cover profile for single door. Max. 4-/8" (1100) in fixed length door panel width. Please indicate finished opening width Ea. VISUR header tube cover profile for pair of doors. Max. 2 4-/8" (1100), in fixed length door panel width. Please indicate finished opening width Ea. VISUR header tube profile in stock length /16" (200) Ea. VISUR header tube profile in stock length 157" (4000) Ea. VISUR cover profile parts for RTS, -1/2" (90), top Ea. VISUR cover rings for bottom bearing Ea. VISUR cover caps, bottom Ea. VISUR glass clamp, top 179 List $ Ea. VISUR glass clamp, bottom 146 Door Stops Ea. Decorative floor stop with bumper (619 only, equivalent to 700) Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTE: For Visur with RTS, specify 90 or 105, HO or NHO, and spring size 62 July 19, 2018 Glass Systems and Solutions Price List #28

73 BEYOND Pinch-Free Pivot Patch Fittings and Designer Pivots BEYOND Pinch-Free Pivot Center Hung Double-Acting All-Glass Door System Safe pinch-free glass door operation for /8" and 1/2" (10 and 12) glass Finishes $ Model Ref. # U/M Description BEYOND Basic Pivot Set Short Pivoting fitting set, short type, consists of: 1 top pivot fitting with pivot 15 dia., 1 bottom pivot fitting with insert for floor closer spindle or round pivot (ordered separately) Set /8" (10) Set 1/2" (12) 561 DRS Rails, Channels & Patch Fittings & Designer Pivots BEYOND Basic Pivot Set Long Pivoting fitting, long type, with pivot dia. 15 at top and insert for floor closer spindle or round pivot at bottom (ordered separately). Please indicate "exact door height = glass measurement" with order Set /8" (10) Set 1/2" (12) 64 Offset Hung Patch Fittings Headers & BEYOND Components BEYOND Components BEYOND Transom fitting, wall connector with plastic socket for top pivot Ea. /8" (10) Ea. 1/2" (12) 278 BEYOND Transom fitting, glass connector with plastic socket for top pivot Ea. /8" (10) Ea. 1/2" (12) Ea. Adjustable Floor Pivot 5/16" (8) to 1/2" (12) (no cover) BEYOND Glass Connector Ea. BEYOND glass connector for connection of sidelite at closing side /8" (10) and 1/2" (12) 9 Bearings and Bushings List $ Ea. Top pivot bearing (aluminum) 40 List $ 66 MANET Sliding Pulls & Closers & Systems Handles Ea. Eccentric socket, adjustable Ea. Floor Bearing 7 Panic Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19,

74 Patch Fittings and Designer Pivots 64 July 19, 2018 Glass Systems and Solutions Price List #28

75 Table of Contents Offset Hung Patch Fittings Offset Hung Patch Fittings Patch Fittings For Single-Acting 1-11/16" (4) Offset Hung Doors 66 For Single-Acting 5/16" (8), /8" (10) and 1/2" (12) Offset Hung Doors 69 NOTE: Refer to pages for Closers and. Panic DRS Rails, Channels & MANET Sliding Pulls & Closers & Systems Handles Headers & Offset Hung Patch Fittings Patch Fittings & Designer Pivots Glass Systems and Solutions Price List #28 July 19,

76 Offset Hung Patch Fittings Patch Fittings 1-11/16" (4 mm) Doors Type A and F Doors /8" (10) and 1/2" (12) Thick Glass Offset Patch Fittings, Complete Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / Top of Door, Offset Patch Fitting Ea. LHR (Shown) Ea. RHR Bottom of Door, Offset Patch Fitting Ea. LHR (Shown) Ea. RHR Transom, Offset Pivot Fitting Ea. LHR (Shown) Ea. RHR Transom/ Sidelite, Offset Pivot Fitting Ea. LHR (Shown) Ea. RHR Wall Anchor or Threaded Rod List Add $ Ea. Wall Anchor Ea. Threaded Rod Anchor 15 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Handing for angle of fin fittings viewed from outside and above as shown in diagram. Please specify glass thickness when ordering. LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE 66 July 19, 2018 Glass Systems and Solutions Price List #28

77 Patch Fittings Offset Hung Patch Fittings Offset Patch Fittings, Complete Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / Frame Mount Offset Patch Fitting Ea DRS Rails, Channels & Frame Mount Offset Patch Fitting Ea Patch Fittings & Designer Pivots Frame Mount Offset Patch Fitting Ea. LHR Ea. RHR Offset Hung Patch Fittings Glass Door to Glass Sidelite Offset Patch Fitting Ea. LHR (Shown) , Ea. RHR , Headers & Wall to Glass Door Offset Patch Fitting Ea. LHR (Shown) , Ea. RHR , Wall to Glass Door Offset Patch Fitting Ea. LHR (Shown) , Ea. RHR , Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Handing for angle of fin fittings viewed from outside and above as shown in diagram. USA HANDING SHOWN (OPPOSITE EUROPEAN HANDING). Please specify glass thickness when ordering. LH LEFT HAND INSIDE RH RIGHT HAND MANET Sliding Pulls & Closers & Systems Handles OUTSIDE INSIDE Panic LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Glass Systems and Solutions Price List #28 July 19,

78 Offset Hung Patch Fittings Patch Fittings Offset Patch Fittings, Complete Standard Finishes $ Custom Finish $ Model Ref. # U/M Description / Top of Door Offset Patch Fitting 12.2 Type A & F shortened 19/2" (15) side only Ea. /8" (10) glass LHR Ea. /8" (10) glass RHR Ea. 1/2" (12) glass LHR Ea. 1/2" (12) glass RHR Bottom of Door Offset Patch Fitting 11.2 Type A & F shortened 19/2" (15) side only Ea. /8" (10) glass LHR Ea. /8" (10) glass RHR Ea. 1/2" (12) glass LHR Ea. 1/2" (12) glass RHR Wall to Glass Door Offset Patch Fitting 12.7 Type A & F shortened 19/2" (15) side only Ea. /8" (10) glass LHR , Ea. /8" (10) glass RHR , Ea. 1/2" (12) glass LHR , Ea. 1/2" (12) glass RHR , Top of Door Offset Patch Fitting 12. Type A & F shortened 19/2" (15) top and side Ea. /8" (10) glass LHR Ea. /8" (10) glass RHR Ea. 1/2" (12) glass LHR Ea. 1/2" (12) glass RHR Bottom of Door Offset Patch Fitting 11. Type A & F shortened 19/2" (15) bottom and side Ea. /8" (10) glass LHR (Shown) Ea. 1/2" (12 mm) glass RHR Ea. /8" (10) glass LHR Ea. 1/2" (12) glass RHR Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Handing for angle of fin fittings viewed from outside and above as shown in diagram. Please specify glass thickness when ordering. LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE 68 July 19, 2018 Glass Systems and Solutions Price List #28

79 Patch Fittings Offset Hung Patch Fittings 5/16" (8 mm), /8" (10 mm), and 1/2" (12 mm) Doors Type A and F Doors /8" (10) and 1/2" (12) Thick Glass Offset Patch Fittings, Complete Standard Finishes $ Custom Finish $ Model Ref. # U/M Description Top and Bottom of Door Offset Patch Fitting Ea. LHR (Shown) Ea. RHR DRS Rails, Channels & Patch Fittings & Designer Pivots Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Offset Hung Patch Fittings NOTES: Handing for angle of fin fittings viewed from outside and above as shown in diagram. Please specify glass thickness when ordering. Maximum door weight 176 lb (80 kg). Maximum door width 4-1/4" (1100 mm). Headers & LH LEFT HAND INSIDE RH RIGHT HAND LHR LEFT HAND REVERSE OUTSIDE INSIDE OUTSIDE RHR RIGHT HAND REVERSE MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

80 70 July 19, 2018 Glass Systems and Solutions Price List #28

81 Table of Contents Headers and Headers and Select Service 72 Headers Ordering Guide 7 Header Single Opening 74 Header Paired Opening 75 MUNDUS Header Single Opening 76 MUNDUS Header Paired Opening 76 Header Options 77 RTS88 Options 77 Optional Sidelite Headers 78 Header and Service Parts 79 Floating Header for All-Glass Entrances with Transom Ordering Guide 85 Floating Header Single Opening 86 Floating Header Paired Opening 86 Floating Header with PT21M Single Opening 87 Floating Header with PT21M Paired Opening 87 Floating Header 87 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Panic MANET Sliding Pulls & Closers & Systems Handles Glass Systems and Solutions Price List #28 July 19,

82 Headers and Select Service Select Service Quick Ship Headers and Select service should be used for small quantities of popular dormakaba products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: dormakaba receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. dormakaba receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. dormakaba reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to dormakaba. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Products and prices are subject to change without notice. Limited quantities available. Key N "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse E W Available only in East Coast Warehouse Available only in West Coast Warehouse Headers and 2-/4" (70) Pivot Location Ref. # Warehouse Product Description Finish List $ SS E Header 6" 4.5" ( ) with PT21 WBP (PT21 Pre-Installed) SS E Header 6" 4.5" ( ) with PT21 WBP (PT21 Pre-Installed) * SSL Header 6" 4.5" ( ) with RTS Prep (Prepared for RTS) * SSL Header 6" 4.5" ( ) with RTS Prep (Prepared for RTS) SS E Header 72" 4.5" ( ) with 2 ea. PT21 WBP (PT21 Pre-Installed) SS E Header 72" 4.5" ( ) with 2 ea. PT21 WBP (PT21 Pre-Installed) * SSL E Header 72" 4.5" ( ) with 2 ea. RTS88 Prep (Prepared for RTS) * SSL E Header 72" 4.5" ( ) with 2 ea. RTS88 Prep (Prepared for RTS) * Headers RTS Prep are prepared for RTS installation. RTS sold seperately. 72 July 19, 2018 Glass Systems and Solutions Price List #28

83 Ordering Guide Headers and Headers and Ordering Guide HDR HDR Model Length Specify Specify Length Doors/Panels None 2D/2P 2D/2GP 2D/1P 2D/1GP 2D 1D/2P 1D/2GP 1D/1P 1D/1GP 1D 4-1/8 4-1/2 6 Header Width No Door or Panels 2 Doors, 2 Panels w/flat Covers 2 Doors, 2 Panels w/glazing Pockets 2 Doors, 1 Panel w/flat Covers 2 Doors, 1 Panel w/glazing Pocket 2 Doors 1 Door, 2 Panels w/flat Covers 1 Door, 2 Panel w/glazing Pockets 1 Door, 1 Panel w/flat Covers 1 Door, 1 Panel w/glazing Pocket 1 Door Cut Length Panel Two Specify 1D FLTCVR 1/2 below 101 FLTCVR Specify Specify Length GLZCVR Cut Length Panel One Cover Options Closer Spring Size SZ2 SZ4 BFE BFI SZ 101 RTS88-5MM Y 105 NHO SZ SHEAR Standard Finish /4" 4-1/8"(44 105) 1-/4" 4-1/2" (44 114) 1-/4" 6" (44 152) Custom Finish 1,2 PT21 RTS88-5MM Clear Anodized (CL) Dark Bronze (DB) Black Anodized (BK) Polished Brass w/o Lacquer (PB) Satin Brass w/o Lacquer (SB) Satin Bronze w/o Lacquer (SBZ) Polished Bronze w/o Lacquer (PB2) Satin Stainless Steel (SS/US2D) Polished Stainless Steel (PS/US2) LH RH Similar to Satin Stainless (Limited Availability) Custom Anodized Finishes (Specify) 299 Custom Cladding (Specifiy) 99 Powder Coated Finishes (Specify) Hand Standard Spindle Location Y N RT588-5MM Closer Bumper Position PT21 PT21M Paired Glass Thickness /4 5/8 /8 1/2 EC2 NHO SHEAR HO Shear Lock Hold/Non-Hold Open 1 dormakaba reserves the right to refuse Custom Finishes. 2 All Custom Finishes require customer sign-off/approval of color chip. Pack of 2 ea. End Caps continued Miter 2 1 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

84 Headers and Single Opening Header, Single Opening 24" (610) to 48" (1219) Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description Single with 1-RTS88 (928.xx) Installed, Flat Cover Single Header Base Price Ea. 4-1/8" (105) Ea. 4-1/2" (114) Ea. 6" (152) ,090 Single with 1-PT21 ( ) Installed, Flat Cover 2.06 Ea. 4-1/8" (105) Ea. 4-1/2" (114) Ea. 6" (152) Single with 1-RTS88 (928.xx) and 1-Shear Lock (9.025) Installed, Sheer Lock Header Cap Ea. 4-1/8" (105) 1,879 1,889 2,042 2,092 2,211 1,989 2,09 2, Ea. 4-1/2" (114) 1,888 1,901 2,096 2,26 2,002 2,048 2, Ea. 6" (152) 1,992 2,020 2,167 2,168 2,248 2,084 2,167 2,544 Single with 1-PT21 ( ) and 1-Shear Lock (9.025) Installed 2.02 Ea. 4-1/8" (105) 1,680 1,690 1,726 1,877 2,012 1,790 1,840 2, Ea. 4-1/2" (114) 1,689 1,702 1,897 2,07 1,80 1,849 2, Ea. 6" (152) 1,79 1,82 1,861 1,969 2,049 1,885 1,965 2,50 Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device in dormakaba header, manual strike. 75 HDWPREP Prep and Install of non-standard dormakaba hardware (e.g., offset pivots, arms, etc.) in dormakaba header. 75 CMP HDWP Competitor hardware component preparation only for dormakaba header (e.g., pivots and arms). Charge may be reviewed based on complexity. 90 CMP HDWI Competitors hardware preparation and installation (e.g., pivots and arms) in dormakaba header 150 CMP SHEAR Competitors Shear Lock, Magnetic Lock, Overhead Concealed Closer prep and install in dormakaba header 250 MITER Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Paired with 2-RTS88 (928.xx) Installed, Flat Cover Paired Header Base Price 1 Non-Fabricated item, can ship in 1 business day through Select Service. Program, quantities limited. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: For headers with RTS, specify 90 or 105, HO or NHO, and spring size. Anodized headers are finished 4 sides, cladded are finished sides. Reference header accessories for cladding purchased separately. Default pivot location is 2-/4" (70) centerline unless otherwise specified. Specify finished header length for any header above. End caps are optional and sold in sets of two (2) each. Headers requiring RTS preparation, less closers, deduct $22 list per closer. Specify "LC" at the end of reference number. Example: LC CMP Charges do not include cost of competitors product. Customer responsible to provide competitors products if pre-installation of competitors product is desired. When pairing a glass panic with a header, denote the jamb condition and clear opening width. When installed against a finished wall, pivot distance will change to -1/2". 74 July 19, 2018 Glass Systems and Solutions Price List #28

85 Paired Opening Headers and Header, Paired Opening 48" (1219) to 92" (248) Model Ref. # U/M Description Standard Finishes $ Custom Finishes $ / / / / / DRS Rails, Channels & Ea. 4-1/8" (105) ,120 1, ,046 1, Ea. 4-1/2" (114) ,160 1, ,064 1, Ea. 6" (152) 952 1,008 1,04 1,04 1,464 1,16 1,6 2,179 Patch Fittings & Designer Pivots Paired with 2-PT21 ( ) Installed, Flat Cover 2.08 Ea. 4-1/8" (105) , Ea. 4-1/2" (114) , , Ea. 6" (152) , ,082 1,881 Offset Hung Patch Fittings Paired with 2-RTS88 (928.xx) and 2-Shear Locks (9.025) Installed, Shear Lock Header Cap Ea. 4-1/8" (105),758,778 4,01 4,152 4,422,978 4,078 4, Ea. 4-1/2" (114),776,802 4,192 4,472 4,004 4,096 4, Ea. 6" ( 152),984 4,040 4, 4,6 4,496 4,168 4, 5,088 Headers & Paired with 1-RTS88 (928.xx) and 1-PT21 ( ) Installed, Flat Cover Ea. 4-1/8" (105) , , Ea. 4-1/2" (114) , , Ea. 6" (152) ,122 1, ,221 2,028 Paired with 2-PT21 ( ) and 2-Shear Locks (9.025) Installed Ea. 4-1/8" (105),54,74,709,748 4,06,574,674 4, Ea. 4-1/2" (114),72,98,788 4,068,600,692 4, Ea. 6" (152),580,66,89,92 4,092,764 4,052 4,790 Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device in dormakaba header, manual strike. 75 HDWPREP Prep and Install of non-standard dormakaba hardware (e.g., offset pivots, arms, etc.) in dormakaba header. 75 CMP HDWP Competitor hardware component preparation only for dormakaba header (e.g., pivots and arms). Charge may be reviewed based on complexity. CMP HDWI Competitors hardware preparation and installation (e.g., pivots and arms) in dormakaba header 150 CMP SHEAR Competitors Shear Lock, Magnetic Lock, Overhead Concealed Closer prep and install in dormakaba header 250 MITER Miter cut charge 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order MANET Sliding Pulls & Closers & Systems Handles NOTES: For headers with RTS, specify 90 or 105, HO or NHO, and spring size. Anodized headers are finished 4 sides, cladded are finished sides. Reference header accessories for cladding purchased separately. Default pivot location is 2-/4" (70) centerline unless otherwise specified. Specify finished header length for any header above. End caps are optional and sold in sets of two (2) each. Headers requiring RTS preparation, less closers, deduct $22 list per closer. Specify "LC" at the end of reference number. Example: LC CMP Charges do not include cost of competitors product. Customer responsible to provide competitors products if pre-installation of competitors product is desired. When pairing a glass panic with a header, denote the jamb condition and clear opening width. When installed against a finished wall, pivot distance will change to -1/2". 1 Non-Fabricated item, can ship in 1 business day through Select Service Program, quantities limited. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19, Panic

86 Headers and MUNDUS Single and Paired Opening MUNDUS PT21M Header, Single Opening Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description Single with 1-PT21M (88.212) Installed, Flat Cover Single Header Base Price Ea. 4-1/8" (105) Ea. 4-1/2" (114) Ea. 6" (152) Single with 1-PT21M (88.212) and 1-Shear Lock (9.025) Installed Ea. 4-1/8" (105) 1,680 1,690 1,726 1,877 2,012 1,790 1,840 2, Ea. 4-1/2" (114) 1,689 1,702 1,897 2,07 1,80 1,849 2, Ea. 6" (152) 1,79 1,82 1,861 1,969 2,049 1,885 1,965 2,50 MUNDUS PT21M Header, Paired Opening Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description Paired with 2-PT21M (88.212) Installed, Flat Cover Paired Header Base Price Ea. 4-1/8" (105) , Ea. 4-1/2" (114) , , Ea. 6" (152) , ,082 1,881 Paired with 1-RTS88 (928.xx) and 1-PT21M (88.212) Installed, Flat Cover Ea. 4-1/8" (105) , , Ea. 4-1/2" (114) , , Ea. 6" (152) ,102 1, ,221 2,028 Paired with 2-PT21M (88.212) and 2-Shear Locks (9.025) Installed Ea. 4-1/8" (105),54,74,709,748 4,06,574,674 4, Ea. 4-1/2" (114),72,98,788 4,068,600,692 4, Ea. 6" (152),580,66,89,92 4,092,764 4,052 4, July 19, 2018 Glass Systems and Solutions Price List #28

87 Options Headers and Header Options Standard Finishes $ Custom Finishes $ Header Stops / /501 50/ /601/ /299/99 DRS Rails, Channels & Ea. Header Stop Patch Fittings & Designer Pivots RTS88 Options Offset Hung Patch Fittings Model Ref. # U/M Description List Add $ RTS88 Overhead Concealed Closer Light Opening Force, Exterior Doors Headers & Ea. 105 HO BFE (5 mm Ext.) Ea. 105 NHO BFE (5 mm Ext.) 244 RTS88 Overhead Concealed Closer Barrier Free (BFI) Interior Doors Only Ea. 105 HO BFI (5 mm Ext.) Ea. 105 NHO BFI (5 mm Ext.) 244 RTS88 Overhead Concealed Closer Hold Open Heavier Spring Sizes Ea. 90 HO SZ (5 mm Ext.) Ea. 105 HO SZ (5 mm Ext.) 244 RTS88 Overhead Concealed Closer Non-Hold Open Heavier Spring Sizes Ea. 105 NHO SZ (5 mm Ext.) Ea. 90 NHO SZ (5 mm Ext.) Non-Fabricated item, can ship in 1 business day through Select Service Program, quantities limited. Standard or Non-Standard Fabricated; lead time up to business days. NOTES: dormakaba requires the use of 5 mm Ext. spindles with all Herculite type door applications when supplied with RTS88 overhead concealed closers. This allows for optimum spindle engagement. Inadequate engagement can cause premature wear on the closers and hardware, voiding warranty. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

88 Headers and Optional Sidelite Headers Optional Sidelite Headers 4-1/8" (105), 4-1/2" (114), and 6" (152) Wide 1-/4"(44) Sidelite Header Options Standard Finishes $ Custom Finishes $ /109 50/ / / / Ref. # U/M Description Header with Flat Cover Ft. 4-1/8" (105) Header with Flat Cover Ft. 4-1/2" (114) Header with Flat Cover Ft. 6" (152) Header with Flat Cover /8" Header with Dri-Fit (Includes gasket) Ft. 4-1/8" (105) Header with /8" (10) Dri-Fit Ft. 4-1/8" (105) Header with 1/2" (12) Dri-Fit 2.70 Ft. 4-1/8" (105) Header with 5/8" (15) Dri-Fit Ft. 4-1/8" (105) Header with /4" (19) Dri-Fit /2" Header with Dri-Fit (Includes gasket) Ft. 4-1/2" (114) Header with /8" (10) Dri-Fit Ft. 4-1/2" (114) Header with 1/2" (12) Dri-Fit Ft. 4-1/2" (114) Header with 5/8" (15) Dri-Fit Ft. 4-1/2" (114) Header with /4" (19) Dri-Fit " Header with Dri-Fit (Includes gasket) Ft. 6" (152) Header with /8" (10) Dri-Fit Ft. 6" (152) Header with 1/2" (12) Dri-Fit 2.71 Ft. 6" (152) Header with 5/8" (15) Dri-Fit Ft. 6" (152) Header with /4" (19) Dri-Fit List Add $ MITER Miter cut charge 61 JAMB Jamb prep charge includes blocking support if required. Allow up to 5 additional days lead-time. 61 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Must specify length when ordering. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66M) before requiring a splice joint; 120" (M) for Brass and Bronze finishes. Above priced per foot for the combined parts defined. 78 July 19, 2018 Glass Systems and Solutions Price List #28

89 and Service Parts Headers and Header and Service Parts 4-1/8" (105) Wide 1-/4" (44) Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / / DRS Rails, Channels & Header Tube, 4-1/8" 9.02 Ft. 4-1/8" (105) Header Tube, Anodized Ft. 4-1/8" (105) Header Tube with Clad on sides only Patch Fittings & Designer Pivots Header Flat Cover, 4-1/8" 9.00 Ft. 4-1/8" (105) Flat Cover, Anodized Ft. 4-1/8" (105) Flat Cover, with Clad on face only Offset Hung Patch Fittings Floating Header Flat Cover Ft. 6" (152) Floating Header Cover, Anodized /8" (152) Floating Header Cover, with Clad on face only Header Cover for RTS Adjustment, 4-1/8" Headers & 9.44 Ft. 4-1/8" (105) Cover for RTS Adjustment, Anodized Ft. 4-1/8" (105) Cover for RTS Adjustment, Clad on face only Floating Header Cover for RTS Adjustment, 4-1/8" Ft. 4-1/8" (105) Floating Header Cover for RTS Adjustment, Anodized Ft. 4-1/8" (105) Floating Header Cover for RTS Adjustment, Clad on face only Floating Header Cover Caps, 4-1/8" Ea. 4-1/8" (105) Floating RTS Cover Cap, Anodized 2.89 Ea. 4-1/8" (105) Floating RTS Cover Cap, Clad on face only. Length is -15/16" (100mm) Ea. 4-1/8" (105) PT21 Cover Cap, Anodized Ea. 4-1/8" (105) PT21 Cover Cap, Clad on face only Header Glazing Pocket/Cover, 4-1/8" 9.01 Ft. /8" (10) & 1/2" (12) glass Ft. /8" (10) & 1/2" (12) glass Clad on face only (Gasket Required) 9.1 Ft. 5/8" (15) & /4" (19) glass Ft. 5/8" (15) & /4" (19) glass Clad on face only (Gasket Required) MANET Sliding Pulls & Closers & Systems Handles Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Must specify length when ordering header extrustions. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66M) before requiring a splice joint; 120" (M) for Brass and Bronze finishes. Panic Glass Systems and Solutions Price List #28 July 19,

90 Headers and and Service Parts Header and Service Parts 4-1/8" (105) Wide 1-/4" (44) Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / / Header Cover Caps, 4-1/8" Ea. 4-1/8" (105) RTS Cover Cap, Anodized Ea. 4-1/8" (105) RTS Cover Cap, Clad on face only. Length is -15/16" (100) Ea. 4-1/8" (105) PT21 Cover Cap, Anodized Ea. 4-1/8" (105) PT21 Cover Cap, Clad on Face Only. Length is -15/16" Header End Cap 9.09 Ea. 4-1/8" (105) 1-/4" (44) Header End Cap, Anodized 9.40 Ea. 4-1/8" (105) 1-/4" (44) Header End Cap, Clad (109 only) Floating Header End Cap Pr. 1-1/16" (45) x 1-/4" (44) Floating Header End Caps, Anodized Pr. 1-1/16" (45) x 1-/4" (44) Floating Header End Caps, Clad Dri-Fit Gasket Ft. /8" (10) & 5/8" (15) glass EMSL 2765 Shear Lock Ft. 1/2" (12) & /4" (19) glass Ea. EMSL 2765 Shear Lock (Not Installed) (no finish options) 1 (no finish options) 1 1,277 (no finish options) EMSL Shear Lock Header Cap, 4-1/8" Ea. 4-1/8" (105) Header Cap for Shear Lock, Anodized Ea. 4-1/8" (105) Header Cap for Shear Lock, Clad on face only. Length is 12-1/8" (08) Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES Must specify length when ordering header extrustions. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66 m) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. 80 July 19, 2018 Glass Systems and Solutions Price List #28

91 and Service Parts Headers and Header and Service Parts 4-1/2" (114) Wide 1-/4" (44) Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / / DRS Rails, Channels & Header Tube, 4-1/2" 9.0 Ft. 4-1/2" (114) Header Tube, Anodized Ft. 4-1/2" (114) Header Tube, with Clad on sides only Header Flat Cover, 4-1/2" 9.04 Ft. 4-1/2" (114) Flat Cover, Anodized Ft. 4-1/2" (114) Flat Cover, with Clad on face only Patch Fittings & Designer Pivots Offset Hung Patch Fittings Floating Header Flat Cover, 4-1/2" Ft. 4-1/2" (114) Floating Header Cover, Anodized Ft. 4-1/2" (114) Floating Header Cover, with Clad on face only Header Cover for RTS Adjustment, 4-1/2" Headers & Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days Ft. 4-1/2" (114) RTS Adjustment Cover, Anodized Ft. 4-1/2" (114) RTS Adjustment Cover, Clad on face only Special Fabricated/Finish or Special Order; lead time up to 5 weeks Floating Header Cover for RTS Adjustment, 4-1/2" Ft. 4-1/2" (114) Floating Header Cover for RTS Adjustment, Anodized Ft. 4-1/2" (114) Floating Header Cover for RTS Adjustment, Clad on face only Floating Header Cover Cap, 4-1/2" Ea. 4-1/2" (114) Floating RTS Cover Cap, Anodized Ea. 4-1/2" (114) Floating RTS Cover Cap, Clad on face only Ea. 4-1/2" (114) Floating PT21 Cover Cap, Anodized Ea. 4-1/2" (114) Floating PT21 Cover Cap, Clad on face only Header Glazing Pocket/Cover, 4-1/2" 9.05 Ft. /8" (10) & 1/2" (12) glass Ft. /8" (10) & 1/2" (12) glass Clad on face only (Gasket Required) 9.5 Ft. 5/8" (15) & /4" (19) glass Ft. 5/8" (15) & /4" (19) glass Clad on face only (Gasket Required) NOTES: Must specify length when ordering header extrustions. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66 m) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. Please note, 6" (152) header channel utilizes inserts from 4-1/8" (105) header design. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

92 Headers and and Service Parts Header and Service Parts 4-1/2" (114) Wide 1-/4" (44) Standard Finishes $ Custom Finishes $ /109 50/ / / / Ref. # U/M Description Header Cover Cap, 4-1/2" 9.06 Ea. 4-1/2" (114) RTS Cover Cap, Anodized Ea. 4-1/2" (114) RTS Cover Cap, Clad on face only. Length is -15/16" (100) Ea. 4-1/2" (114) PT21 Cover Cap, Anodized Ea. 4-1/2" (114) PT21 Cover Cap, Clad on Face Only. Length is -15/16" Header End Cap, 4-1/2" (109 only) Ea. 4-1/2" (114) 1-/4" (44) Header End Cap, Anodized 9.41 Ea. 4-1/2" (114) 1-/4" (44) Header End Cap, Clad Floating Header End Caps, 4-1/2" Pr. 2" (50) x 1-/4" (44) Floating Header End Caps, Anodized Pr. 2" (50) x 1-/4" (44) Floating Header End Caps, Clad Dri-Fit Gasket Ft. /8" (10) & 5/8" (15) glass Ft. 1/2" (12) & /4" (19) glass 1 (no finish options) (no finish options) EMSL 2765 Shear Lock Ea. EMSL 2765 Shear Lock (Not Installed) 1,277 1 (no finish options) EMSL Shear Lock Header Cap, 4-1/2" Ea. 4-1/2" (114) Header Cap for Shear Lock, Anodized Ea. 4-1/2" (114) Header Cap for Shear Lock, Clad on face only. Length is 12-1/8" (08) Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Must specify length when ordering header extrustions. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66M) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. Please note, 6" (152) header channel utilizes inserts from 4-1/8" (105) header design. 82 July 19, 2018 Glass Systems and Solutions Price List #28

93 and Service Parts Headers and Header and Service Parts 6" (152) Wide 1-/4" (44) Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / / DRS Rails, Channels & Header Tube, 6" 9.42 Ft. 6" (152) Header Tube, Anodized Ft. 6" (152) Header Tube, Clad on sides only Patch Fittings & Designer Pivots Header Flat Cover, (6" and 4-1/8") 9.00 Ft. 6" (152) & 4-1/8" (105) Flat Cover, Anodized Ft. 6" (152) & 4-1/8" (105) Flat Cover, with Clad on face only. Floating Header Flat Cover, (6" and 4-1/8") Offset Hung Patch Fittings 9.47 Ft. 6" (152) & 4-1/8" (105) Floating Header Cover, Anodized Ft. 4-1/8" (105) Floating Header Cover, with Clad on face only. Header Cover for RTS Adjustment, (6" and 4-1/8") Headers & 9.44 Ft. 6" (152) & 4-1/8" (105) Cover for RTS Adjustment, Anodized Ft. 6" (152) & 4-1/8" (105) Cover for RTS Adjustment, with Clad on face only Floating Header Cover for RTS Adjustment, (6" and 4-1/8") Ft. 6"(152) & 4-1/8" (105) Floating Header Cover for RTS Adjustment, Anodized Ft. 6"(152) & 4-1/8" (105) Floating Header Cover for RTS Adjustment, Clad on face only Floating Header Cover Caps, (6" and 4-1/8") Ea. 6"(152) & 4-1/8" (105) Floating RTS Cover Cap, Anodized 2.89 Ea. 6"(152) & 4-1/8" (105) Floating RTS Cover Cap, Clad on face only. Length is -15/16" (100) 9.45 Ea. 6"(152) & 4-1/8" (105) PT21 Cover Cap, Anodized Ea. 6"(152) & 4-1/8" (105) PT21 Cover Cap, Clad on face only Header Glazing Pocket/Cover, (6" and 4-1/8") 9.01 Ft. /8" (10) & 1/2" (12) glass Ft. /8" (10) & 1/2" (12) glass Clad on face only (Gasket Required) 9.1 Ft. 5/8" (15) & /4" (19) glass Ft. 5/8" (15) & /4" (19) glass Clad on face only (Gasket Required) Header Cover Caps, (6" and 4-1/8") Ea. 6" (152) & 4-1/8" (105) RTS Cover Cap, Anodized Ea. 6" (152) & 4-1/8" (105) RTS Cover Cap, Clad on face only. Length is -15/16" (100) Ea. PT21 Cover Cap, Anodized Ea. PT21 Cover Cap, Clad on Face Only Length is -15/16" (100) MANET Sliding Pulls & Closers & Systems Handles Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Must specify length when ordering header extrustions. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66M) before requiring a splice joint; 120" (M) for Brass and Bronze finishes. Please note, 6" (152) header channel utilizes inserts from 4-1/8" (105) header design. Panic Glass Systems and Solutions Price List #28 July 19,

94 Headers and and Service Parts Header and Service Parts 6" (152) Wide 1-/4" (44) Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / / Header End Cap (109 only) Ea. 6" (152) 1-/4" (44) Header End Cap, Anodized Ea. 6" (152) 1-/4" (44) Header End Cap, Clad Floating Header End Cap Pr. 2-/4" (69) x 1-/4" (44) Floating Header End Caps, Anodized Pr. 2-/4" (69mm) x 1-/4" (44) Floating Header End Caps, Clad Dri-Fit Gasket Ft. /8" (10) & 5/8" (15) glass 1 (no finish options) Ft. 1/2" (12) & /4" (19) glass 1 (no finish options) EMSL 2765 Shear Lock Ea. EMSL 2765 Shear Lock (Not Installed) 1 1,277 (no finish options) EMSL Shear Lock Header Cap, (6" and 4-1/8") Ea. 6" (152) & 4-1/8" (105) Header Cap for Shear Lock, Anodized Ea. 6" (152) & 4-1/8" (105) Header Cap for Shear Lock, Clad on face only. Length is 12-1/8" (08) Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Must specify length when ordering header extrustions. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66M) before requiring a splice joint; 120" (M) for Brass and Bronze finishes. Please note, 6" (152) header channel utilizes inserts from 4-1/8" (105) header design. 84 July 19, 2018 Glass Systems and Solutions Price List #28

95 Floating Header Headers and Floating Header for All-Glass Entrances with Transom Ordering Guide Patch Fittings & Designer Pivots Panic DRS Rails, Channels & FHDR FHDR Model Door Width Specify Specify Width Specify NONE Door Width Paired Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Specify Header Length Header Width 4-1/8 4-1/2 101 RTS88-5MM Y 105 NHO SZ 701 Polished Stainless Steel (PS/US2) Standard Finish Finish Custom 1,2 PT21 RTS88-5MM Similar to Satin Stainless (Limited Availability) Custom Anodized Finishes (Specify) Paired PT21M PT21 RTS88-5MM 101 Clear Anodized (CL) Y 108 Dark Bronze (DB) N 109 Black Anodized (BK) Standard 50 Polished Brass w/o Lacquer (PB) Spindle Location 599 Satin Brass w/o Lacquer (SB) 600 Satin Bronze w/o Lacquer (SBZ) 601 Polished Bronzed w/o Lacquer (PB2) 700 Satin Stainless Steel (SS/US2D) Custom Cladding (Specify) Powder Coated Finishes (Specify) 1-/4" 4-1/8" 1-/4" 4-1/2" 1-/4" 6" 6 Doors/Panels 2D/SFH 2D/FFH 2 Door, Full Floating Header 1D/SFH 1 Door, Semi-Floating Header 1 Door, Full Floating Header 1D/FFH 4-1/8 1D/FFH 1/2 below 101 Hold/ Non-Hold Open NHO HO Closer Bumper Position Closer Spring Size SZ2 SZ4 BFE BFI SZ 1/2 /8 5/8 1 dormakaba reserves the right to refuse Custom Finishes. 2 All Custom Finishes require customer sign-off/approval of color chip. 2 Door, Semi-Floating Header continued /4 Glass Thickness Glass Systems and Solutions Price List #28 July 19,

96 Headers and Floating Header Floating Header, Single Opening 24" (610) to 48" (1219) Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description Single Floating Header with 1-RTS88 (928.xx) Installed Single Header Base Price Ea. 4-1/8" (105) , , Ea. 4-1/2" (114) ,018 1, , Ea. 6" (152) 1,004 1,027 1,04 1,409 1,209 1,222 1,826 Single Floating Header with 1-PT21 ( ) Installed 2.46 Ea. 4-1/8" (105) , Ea. 4-1/2" (114) , Ea. 6" (152) Floating Header, Paired Opening 48" (1219) to 96" (248) Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description Paired Floating Header with 2-RTS88 (928.xx Installed Paired Header Base Price Ea. 4-1/8" (105) 1,518 1,552 1,666 1,970 2,128 1,826 1,846 2, Ea. 4-1/2" (114) 1,550 1,598 2,06 2,198 1,872 1,880 2, Ea. 6" (152) 2,008 2, ,818 2,417 2,444,652 Paired Floating Header with 2-PT21 ( ) Installed 2.48 Ea. 4-1/8" (105) 1,114 1, ,566 1,724 1,422 1,442 2, Ea. 4-1/2" (114) 1,146 1,194 1,62 1,794 1,468 1,476 2, Ea. 6" (152) 1,479 1,525 2,080 2,289 1,888 1,915,12 Paired Floating Header with 1-RTS88 (928.xx) and 1-PT21 ( ) Installed 2.47 Ea. 4-1/8" (105) 1,16 1,50 1,446 1,768 1,926 1,624 1,644 2, Ea. 4-1/2" (114) 1,48 1,96 1,84 1,996 1,670 1,678 2, Ea. 6" (152) 1,744 1,789 2,44 2,554 2,15 2,179,88 Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device in dormakaba header, manual strike. 75 HDWPREP Prep. and Install of non-standard dormakaba hardware (e.g., offset pivots, arms, etc.) in dormakaba header. 90 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order July 19, 2018 Glass Systems and Solutions Price List #28

97 Floating Header Headers and Floating Header Floating Header with PT21M, Single Opening 24" (610) to 48" (1219) Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description DRS Rails, Channels & Single Floating Header with 1-PT21M (88.212) Installed Single Header Base Price 2.4 Ea. 4-1/8" (105) , Ea. 4-1/2" (114) , Ea. 6" (152) Patch Fittings & Designer Pivots Floating Header with PT21M, Paired Opening 48" (1219) to 96" (248) Offset Hung Patch Fittings Standard Finishes $ Custom Finishes $ / / / / / Model Ref. # U/M Description Paired Floating Header with 2-PT21M (88.212) Installed Paired Header Base Price Headers & 2.45 Ea. 4-1/8" (105) , ,566 1,724 1,422 1,442 2, Ea. 4-1/2" (114) ,194 1,62 1,794 1,468 1,476 2, Ea. 6" (152) 1,479 1,525 2,080 2,289 1,888 1,915,12 Paired Floating Header with 1-RTS88 (928.xx) and 1-PT21M (88.212) Installed 2.44 Ea. 4-1/8" (105) 1,16 1,50 1,446 1,768 1,926 1,624 1,644 2, Ea. 4-1/2" (114) 1,48 1,96 1,84 1,996 1,670 1,678 2, Ea. 6" (152) 1,744 1,789 2,44 2,554 2,15 2,179,88 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES Must specify length when ordering. dormakaba will cut to specified size, priced per foot only. Maximum overall length 144" (.66 m) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. For floating Header with RTS, specify 90 or 105, HO or NHO, and spring size. Headers requiring RTS preparation, less closers, deduct $150 list per closer. Specify "LC" at the end of reference number. Example: LC MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

98 Headers and Headers 88 July 19, 2018 Glass Systems and Solutions Price List #28

99 Table of Contents Closers and Closers and Select Service 90 RTS88 Overhead Concealed Closers and Covers 9 Closer and Pivot 94 BTS Floor Closers 98 BTS 102 Shear Locks 104 Locks and Cylinders 105 Strikes, Saddles, and Thresholds 106 DRS Rails, Channels & Patch Fittings & Designer Pivots Panic MANET Sliding Pulls & Closers & Systems Handles Headers & Offset Hung Patch Fittings Glass Systems and Solutions Price List #28 July 19,

100 Closers and Select Service Quick Ship Closers and Select service should be used for small quantities of popular dormakaba products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: dormakaba receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. dormakaba receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. dormakaba reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to dormakaba. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Products and prices are subject to change without notice. Limited quantities available. Key N "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse E W Available only in East Coast Warehouse Available only in West Coast Warehouse 90 July 19, 2018 Glass Systems and Solutions Price List #28

101 Select Service Closers and Closers and RTS Series Ref. # Warehouse Package Spring Stop NHO/HO Extension List $ SS RTS88 SZ 105 NHO 5 mm SS RTS88 SZ 105 HO 5 mm SS RTS88 SZ 90 NHO 5 mm SS RTS88 SZ 90 HO 5 mm SS RTS88 BFI 105 NHO 5 mm SS RTS88 BFI 105 HO 5 mm 244 DRS Rails, Channels & Patch Fittings & Designer Pivots RTS and Service Items Ref. # Warehouse Model Description Finish List $ E CRNR BRKT Header to side Jamb SS E 885 End load arm, 1" web SS E 886 End load arm, 7/8" web SS E 887 End load arm, 5/8" web SS E 888 End load arm, /4" web SS 8812 Offset arm SS 8852 Short floor pivot SS E 885 Tall floor pivot SS E 8575 Cover, steel SS E 856 Cover, aluminum SS E * 8521E 2-5/16" (Add-On) spindle extension 40 * dormakaba recommends never combining RTS88 size BFI, BFE, or SZ2 closer with 8521E add-on extended spindle. These closers may not generate enough power to close and latch a door if used in combination with 8521E. Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

102 Closers and Select Service BTS and Service Items Ref. # Warehouse Product Hand Finish List $ SS BTS80 Sz. (was BFE) SS BTS80 Sz. 4 (was SZ) SS BTS80 Sz. 6 (was SZ2) SS BTS75V NHO SS BTS75V BF NHO SS BTS75V 90 HO SS 7400 (spindle insert) 5/16" Clearance SS (spindle insert) 1/2" Clearance SS E (spindle insert) 5/8" Clearance SS (spindle insert) /4" Clearance SS E (spindle insert) 7/8" Clearance SS E (spindle insert) 1-1/8" Clearance SS 7410 (BTS80 cover plate) SS E 7410 (BTS80 cover plate) SS 7510 (BTS75V cover plate) SS E 7510 (BTS75V cover plate) July 19, 2018 Glass Systems and Solutions Price List #28

103 RTS88 Series Closers and Overhead Concealed Closers and Covers Ref. # U/M Description List $ RTS88 Closers Barrier Free Exterior (BFE) Ea. 105 HO (5 mm ext.)* DRS Rails, Channels & Ea. 105 NHO (5 mm ext.)* RTS88 Closers Barrier Free Interior (BFI) Ea. 105 HO Ea. 105 NHO Patch Fittings & Designer Pivots Ea. 105 HO (5 mm ext.)* Ea. 105 NHO (5 mm ext.)* Ea. 105 HO Ea. 105 NHO Offset Hung Patch Fittings RTS88 Closers Hold Open Ea. 90 (5 mm ext.) Size * Ea. 105 (5 mm ext.) Size * Ea. 105 Size Headers & Ea. 105 Size RTS88 Closers No Hold Open 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks Ea. 90 Size Ea. 90 Size Ea. 105 (5 mm ext.) Size * Ea. 90 (5 mm ext.) Size * Ea. 105 Size Ea. 105 Size Ea. 90 Size Ea. 90 Size Ea. 90 Size Finishes $ RTS88 Closers Covers** / /501 Model Ea. Cover when installed in Wood Header Ea. Cover when installed in Alum inum Header Ea. Cover when installed in Steel Header NOTE: * dormakaba Glass requires the use of 5 mm extended spindles with ALL Herculite glass door applications when an OHCC is specified. This allows for optimum spindle bite. Inadequate bite can cause premature wear on the closers and hardware, potentially voiding warranty. Spring sizes other than what is listed above are available please consult factory MANET Sliding Pulls & Closers & Systems Handles Panic ** Always use an auxillary stop in conjunction with RTS88 installations. Glass Systems and Solutions Price List #28 July 19,

104 Closers and Closer and Pivot Closer and Pivot Brackets and Arms Model Ref. # U/M Description Finishes $ Brackets Ea. Round Angle Bracket (screws not included) Ea. Screw Package Ea. Corner Bracket Ea. Screw Package Ea. Slotted Angle Bracket (screws not included) Ea. Screw Package 1 Top Arms 100/ Ea. Rail Top Arm End Load 5/8" (16) web depth Ea. Rail Top Arm End Load /4" (19) web depth Ea. Rail Top Arm End Load 7/8" (22) web depth S Ea. Rail Short Top Arm End Load 7/8" (22) web depth Ea. Rail Top Arm End Load 7/8" (22) web depth Ea. Rail Top Arm End Load 1" (25) web depth Ea. Rail Top Arm Side Load 1/2" (1) web depth 60 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 94 July 19, 2018 Glass Systems and Solutions Price List #28

105 RTS88 Series Closers and Closer and Pivot Arms and Pivots Model Ref. # U/M Description Finishes $ Top Arms Ea. Rail Top Arm Side Load 5/8" (16) web depth 18 DRS Rails, Channels & Patch Fittings & Designer Pivots Ea. Rail Top Slide Arm /4" (19) Offset /4" (19) web depth 81 5 Top Pivots /701 HD Ea. Walking Beam Pivot with 5/8" (16) Pin Complete Heavy Duty HD8062 TOP Ea. Top Walking Beam Pivot with 5/8" (16) Pin (HD) Offset Hung Patch Fittings Headers & HD8062 LOWER Ea. Top Walking Beam Pivot Door Portion (5/8" (16) Pin) Ea. Top Walking Beam Pivot with 1/2"(1) Pin (Used for custom 1/2" (1) Receiver (Bearing) applications) Ea. Top Walking Beam Pivot with 19/2" (15) Pin (Do not use with 55.0, 55.9, or 19.2 inserts) Use with Lower. PT Ea. Top Walking Beam Pivot for use with inserts (Standard Glass WBP) 55.0, 55.9, and 19.2 ( , , and respectively) 8062 LOWER Ea. Top Walking Beam Pivot Door Portion (15 mm Pin) use with 8062 (Use with ) E Ea. Top Walking Beam Pivot Electrified (5/8" (16) Pin) / MANET Sliding Pulls & Closers & Systems Handles 108/109 50/ / / COV Ea. Top Walking Beam Pivot Cover Plate Panic 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19,

106 Closers and Closer and Pivot Closer and Pivot Pivots Model Ref. # U/M Description List $ 25. PT Ea. Top Pivot with Threaded Rod 9 1 Finishes $ 25.6 PT Ea. Top Pivot with 6 mm Mounting Plate / PT Ea. mm Mounting Plate /4" Top Offset Pivot 14 (Primer) / /501 50/ /601/ Ea. /4" Offset Top Pivot (75120) (Specify Hand) /2" Top Offset Pivot Ea. 1-1/2" Offset Top Pivot (15120) (Specify Hand) Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTE: and in 700 or 701 Finish is Satin or Polished Chrome Bronze base metal. 96 July 19, 2018 Glass Systems and Solutions Price List #28

107 RTS88 Series Closers and Closer and Pivot Inserts and Header Stops Model Ref. # U/M Description List $ Top Inserts * Ea. Top Rail Insert for 15 mm Diameter Pin Ea. Top Rail Insert RTS 88 DRS Rails, Channels & Patch Fittings & Designer Pivots * Ea. Top Rail Adj. Insert 54 1 Offset Hung Patch Fittings Ea. Bottom fitting insert for PT10, used with BTS closers, or 7471K or 55.5 floor bearings 20 1 * Ea. Top Fitting Insert for 15 mm Pin 16 1 Headers & Ea. Top Fitting Pivot Insert Ea. Top Fitting Sideload Insert RTS Ea. Top Fitting Insert Blank Ea. Top Fitting Insert Stop 20 1 Header Stops Standard Finishes $ Custom Finishes $ / /501 50/ /601/ /299/ Ea. Header Stop Extension List $ **8521E Ea. RTS88 Spindle Extension 1 Non-Fabricated item, ships in 1 business day Non-Fabricated item, ships in business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. * If using with walking beam top portion, use only with walking beam pivot PT21 ( ). Other walking beam pins may not engage properly. ** dormakaba recommends never combining RTS88 size BFI, BFE, or SZ2 closer with 8521E add-on extended spindle. These closers may not generate enough power to close and latch a door if used in combination with 8521E. 40 MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

108 Closers and BTS Series BTS Floor Closers How to Determine Hand of Door LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Ref. # U/M Description List $ BTS75V Closers Ea. HO Ea. HO Ea. NHO 595 BTS75V Closers Barrier Free (BF) Ea. HO Ea. NHO 595 BTS80 Closers Ea. ANSI Size 4 (Standard) Ea. ANSI Size 6 (Strong) Ea. ANSI Size (BFE) 68 BTS80 Closers EMB (Electromagnetic Hydraulic Hold Open) Ea. ANSI Size 5 Left Hand 1, Ea. ANSI Size 5 Right Hand 1,70 5 BTS80F Closers (Fire Rated) Ea. ANSI Size 5 Left Hand Ea. ANSI Size 5 Right Hand Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Cement box included with all BTS closers listed above. Additional cement boxes available. EMB handing determined from push side of door. 98 July 19, 2018 Glass Systems and Solutions Price List #28

109 BTS Series Closers and BTS Floor Closers Covers and Cement Boxes Finishes $ Model Ref. # U/M Description 50/ /602 *618/ /701 Covers and Cement Boxes Ea. BTS75V Cover DRS Rails, Channels & Patch Fittings & Designer Pivots Ea. BTS80 Cover Offset Hung Patch Fittings List $ Ea. BTS75V Cement Box 47 Headers & Ea. BTS80 Cement Box TP75V Ea. BTS75V Terrazzo Cover CH TP8OCH Ea. BTS80 Terrazzo Cover CH TP8OLH Ea. BTS80 Terrazzo Cover LH /4" (19) Offset TP8ORH Ea. BTS80 Terrazzo Cover RH /4" (19)Offset 1 Non-Fabricated item, ships in 1 business day Non-Fabricated item, ships in business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks MANET Sliding Pulls & Closers & Systems Handles * 618 and 619 satin and polished nickel respectively are BHMA finish codes. Panic Glass Systems and Solutions Price List #28 July 19,

110 Closers and BTS Series BTS Spindles Model Ref. # U/M Description List $ Bottom Spindles Ea. 5/16" (8) Spindle Ea. 1/2" (1) Spindle Ea. 5/8" (16) Spindle Ea. /4" (19) Spindle Ea. 1/16" (21) Spindle Ea. 7/8" (22) Spindle Ea. 1-1/8" (29) Spindle Ea. 1-5/16" () Spindle Ea. 1-1/2" (8) Spindle Ea. 1-11/16" (4) Spindle Ea. 1-7/8" (48) Spindle Ea. 2-1/16" (52) Spindle Ea. 2-5/16" (59) Spindle 60 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 100 July 19, 2018 Glass Systems and Solutions Price List #28

111 BTS Series Closers and BTS Spindles Model Ref. # U/M Description List $ Bottom Offset Spindles Ea. 5/16"(8) Spindle Left Hand 48 1 DRS Rails, Channels & Ea. 5/16" (8) Spindle Right Hand Ea. 1/2" (1) Spindle Left Hand Ea. 1/2" (1) Spindle Right Hand Ea. /4" (19) Spindle Left Hand 48 1 Patch Fittings & Designer Pivots Ea. /4" (19) Spindle Right Hand Ea. 7/8" (22) Spindle Left Hand Ea. 7/8" (22) Spindle Right Hand 60 Offset Hung Patch Fittings Ea. 1-1/8" (29) Spindle Left Hand Ea. 1-1/8" (29) Spindle Right Hand Ea. 1-5/16" () Spindle Left Hand Ea. 1-5/16" () Spindle Right Hand 55 Headers & Ea. 1-1/2" (8) Spindle Left Hand Ea. 1-1/2" (8) Spindle Right Hand 55 1 Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

112 Closers and BTS Series BTS Finishes $ Model Ref. # U/M Description /109 50/ / /501 Bottom Arms Ea. Bottom Arm Ea. Bottom Arm 58 Bottom /4" Offset Arm Ea. Complete Right Hand Ea. Left Hand COV Ea. Offset Arm Cover Right Hand Ea. Left Hand Bottom 1-1/2" Offset Arm Ea. Complete Right Hand Ea. Left Hand COV Ea. Offset Arm Cover Right Hand Ea. Left Hand N/745N Ea. Bottom Slide Arm 128 (100) LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Bottom/Floor Pivots Ea. Complete, Adjustable Floor Pivot 5/16" (8) to 1/2" (1) (includes cover, mounting hardware) Ea. Adjustable Floor Pivot Cover Plate 101/ / Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTE: 752 & 152 cover caps in 700 or 701 finish are Satin and Polished Chrome. 102 July 19, 2018 Glass Systems and Solutions Price List #28

113 BTS Series Closers and BTS Ea. Floor Pivot 5/16" (8) Clearance 55.5 ext 5 mm 55.5 ext 10 mm Ea. Floor Pivot 1/2" (1) Clearance (5 mm ext.) Ea. Floor Pivot 11/16" (18) Clearance (10 mm ext.) DRS Rails, Channels & Patch Fittings & Designer Pivots 55.5 ext 15 mm Ea. Floor Pivot 15/16" (2)Clearance (15 mm ext.) 110 Offset Hung Patch Fittings 1 Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Finishes $ Model Ref. # U/M Description /109 50/ / /701 Headers & Floor Pivot with /4" Clearance 1 1 Floor Pivots 7471K Ea. Complete, Floor Pivot /4" (19) Clearance Ea. Floor Pivot Cover / 7471K 5 mm ext Ea. Complete, Floor Pivot 15/16" (2) Clearance (5 mm ext.) Ea. Bottom Pivot 7/8" (22) Web Depth (Adj. /8"(10)-5/8" (16)) Ea. Threshold Pivot 7/8" (22) Web Depth (Adj. /16" (5) 7/16"(11)) List $ MANET Sliding Pulls & Closers & Systems Handles Ea. Bottom Pivot 1-9/16" (40) Web Depth (Adj. 1/4" (6) 1/2" (1)) 52 1 Panic 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19,

114 Closers and Floor Pivots Ea. Threshold Pivot 1-/8" (5) Web Depth (Adj. /16" (5)-7/16" (11)) Ea. Bottom Pivot 1-9/16" (40) Web Depth (Adj. /16" (5)-7/16" (11)) 52 5 Bottom Inserts Ea. Rail Bottom Insert Ea. Fitting Bottom Insert 20 1 Shear Locks Ref. # U/M Description Finishes $ EMSL Shear Locks Ea. EMSL 2765 Shear Lock not installed 1,277 EML Magnetic Locks Ea. EML 10 electromagnetic lock, single door, 1,500 lb (680 kg) Ea. EML 10 BA DP electromagnetic lock, single door, 1,500 lb (680 kg) with BA bond sensor and DP door position sensor Ea. EML 20 electromagnetic lock, double door, 1,500 lb (680 kg) Ea. EML 20 BA DP electromagnetic lock, double door, 1,500 lb (680 kg) with BA bond sensor and DP door position sensor 1, Ea. EML 71 electromagnetic lock, single door, 750 lb (40 kg) Ea. EML 71 BA DP electromagnetic lock, single door, 750 lb (40 kg) with BA bond sensor and DP door position sensor Ea. EML 72 electromagnetic lock, double door, 750 lb (40 kg) Ea. EML 72 BA DP electromagnetic lock, double door, 750 lb (40 kg) with BA bond sensor and DP door position sensor 97 NOTE: Prices shown for EMSL or EML locks do not include factory fabrication or installation fees. Non-Fabricated item, ships in business days 104 July 19, 2018 Glass Systems and Solutions Price List #28

115 Closers and EML Magnetic Locks Finishes $ Model Ref. # Glass Thickness Description 700 GDB /2" (1) Glass door bracket for EML-10 mag lock, single 16 GDB /4" (19) Glass door bracket for EML-10 mag lock, single 16 GDB /2" (1) Glass door bracket for EML-20 mag lock, double 26 GDB /4" (19) Glass door bracket for EML-20 mag lock, double 26 GDB /2" (1) Glass door bracket for EML-71 mag lock, single 16 GDB /4" (19) Glass door bracket for EML-71 mag lock, single 16 GDB /2" (1) Glass door bracket for EML-72 mag lock, double 26 GDB /4" (19) Glass door bracket for EML-72 mag lock, double 26 Locks and Cylinders DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Locks List $ Ea. Brass Lock 1-9/16"(40) 5/8" (16) Throw (DRS Rail) Ea. Brass Door Lock 1-9/16" (7/8" long throw fully retracted projects ¼" below lock base) 52 5 Headers & Ea. Brass Lock 1-15/16" 5/8" Throw. Not for use with DRS Rails. Requires 1-15/16" lock height clearance in rail Ea. Extended Lock Bolt 1-7/8" (48) (5/8" (16) Throw, projects 1/4" (6) below lock base when fully retracted) (DRS Rail) Ea. Square Lock Bolt 6 Cylinders / Ea. Mortise Key Cylinder/ Split Ring (DRS) Ea. Mortise Thumbturn Cylinder/ Split Ring (DRS) Ea. Mortise Dummy (Blank) Cylinder for (DRS) Lock, w/ split ring Ea. Mortise Key Cylinder/ Blocking Ring (AR20) Ea. Mortise Thumbturn Cylinder/ Blocking Ring (AR20) 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks MANET Sliding Pulls & Closers & Systems Handles NOTES For Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways. LH housing requires RH profile thumbturn cylinder; RH housing requires LH profile thumbturn cylinder. * When retracted, long throw extends beyond lock base by 1/4" (6). Panic Glass Systems and Solutions Price List #28 July 19,

116 Closers and Cylinders / Ea. Mortise Dummy (Blank) Cylinder for AR20 Lock, w/split ring Ea. Mortise Cylinder Rose 16 (108 only) 16 50/ Ea. Profile Key Cylinder Ea. Profile Thumbturn Cyl. RH Lock Housing Ea. LH Lock Housing NOTES For Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways. LH housing requires RH profile thumbturn cylinder; RH housing requires LH profile thumbturn cylinder. Strikes, Saddles, Threshold Finishes $ Ref # U/M Description /501 50/ /601 Strikes 92.0 Ea. Dust Proof Strike Overall Length 1-1/2" (8) / Ea. Strike Plate Ea. Adjustable Strike 28 Saddles and Thresholds Ft. 1/2" (1) 4" (102) Threshold 16 Length 14 List $ MITER Miter cut charge per miter 61 1 Non-Fabricated item, ships in 1 business day Non-Fabricated item, ships in business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Must specify length when ordering. dormkaba will cut to specified size, priced per foot only. Maximum length for extrusions is 144" (.66 m) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. 106 July 19, 2018 Glass Systems and Solutions Price List #28

117 Table of Contents for Glass Doors CLM9000 Ordering Guide 108 Housing and Strikes Options 109 Cast or Forged Levers 111 Cylinder Types, Keying Options, and Keyways 11 Studio and Junior Studio Lockset Housings and Strikes 114 Junior Office Lockset Housings and Strikes 115 Junior Office Classic Lockset 116 Studio and Junior Levers, Knobs, and 117 ARCOS ARCOS Lockset Housings and Strikes 118 ARCOS 119 Locks for Sliding Doors, Strikes, and Handles 120 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Panic MANET Sliding Pulls & Closers & Systems Handles Headers & Glass Systems and Solutions Price List #28 July 19,

118 CLM9000 CLM9000 Ordering Guide Model Classroom Intruder w/db Storeroom Classroom Office/Entry (Alt FØ4) (Default) Office/Entry Passage/Closet CLM9 CLM9 Lock Function Conventional Combinated SFIC Combination SFIC (6-Pin) (Default) SFIC w/disposable Core SFIC w/temporary Construction Core Less Conventional Core Schlage LFIC (Less Core) Less Both Levers/Roses Less Both Levers Less Levers LLL LB Less Inside Lever/Rose Less Outside Lever/Rose Cylinder Type LILR LOLR Satin Stainless 700 RH RHR LH LHR Right Hand Right Hand Reverse Left Hand Left Hand Reverse (Default) LS STRKHSNG WALLSTRK Less Strike Strike Housing (Default) Wall Strike 905 C6 Y LRA 700 LHR 1/2 STRKHSNG XXXX D C C6 J T L R N Y Default Lever Handles Trim L118A L117A L114A L112A L110A L109A LVA LNA LFA LDA LAA LGA LTA LCA LRA Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Curved Lever and A Rose Tapered Lever and A Rose Premium Curved Lever and A Rose Swept Lever and A Rose Premium Tubular No Return Lever and A Rose Curved No Return Lever Tubular Lever and A Rose and A Rose Curved Lever and A Rose Rectangular Lever and A Rose (Default) Finish Handing Glass Thickness /8" 1/2" /8 (10) 1/2" (12) (Default) Strike Keying Options See Page 11 for Keying Cylinder Options 108 July 19, 2018 Glass Systems and Solutions Price List #28

119 CLM9000 CLM9000 Lockset Housing and Strikes Finish $ Model Ref. # U/M Handing Description 700 CLM Passage/Closet Latch bolt operated by trim either side DRS Rails, Channels & Ea. RH Ea. RHR Ea. LHR 847 Patch Fittings & Designer Pivots CLM9050 C MKD (KD) 700 CLM905 C MKD (KD) 700 CLM9070 C MKD (KD) 700 Office/Entry Latch bolt operated by trim either side except when outside trim locked by stopworks. When outside trim locked, latch bolt retracted by key outside or operated by trim inside Ea. RH Ea. LH Ea. RHR Ea. LHR 999 Office/Entry Latch bolt operated by trim either side except when ouside trim locked by key outside or by inside turn. If outside trim locked, latch bolt actuated by key outside or trim inside. Outside trim remains locked until inside turn set to unlock position or unlocked by key. Auxiliary latch deadlocks latch bolt when door locked Ea. RH 1, Ea. LH 1, Ea. RHR 1, Ea. LHR 1,121 Classroom Latch bolt operates trim either side, except when outside trim locked by key outside. When outside trim locked, latch bolt operated by trim inside. Auxiliary latch deadlocks latch bolt Ea. RH Ea. LH Ea. RHR Ea. LHR 999 NOTE: Handing Based on American Standards (Opposite Euro DIN Standards) CLM9000 series does not come standard with a strike due to possible sidelite configurations. Customer must choose appropriate strike from the strike options on page 111 as an "add" option. LH LEFT HAND INSIDE OUTSIDE INSIDE RH RIGHT HAND Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Panic Glass Systems and Solutions Price List #28 July 19,

120 CLM9000 CLM9000 Lockset Housing and Strikes Finish $ Model Ref. # U/M Description 700 CLM9080 C MKD (KD) 700 Configured Only (CF)* Storeroom Latch bolt retracted by key outside or trim inside. Outside trim always rigid. Auxiliary Latch deadlocks latch bolt. CLM9080 RH Ea. 999 CLM9080 LH Ea. 999 CLM9080 RHR Ea. 999 CLM9080 LHR Ea. 999 CLM9974 C MKD (KD) 700 Classroom/Intruder w/ Dead Bolt Latch bolt operates trim either side, except when locked by projection of dead bolt. Dead bolt actuated by key either side. Inside trim operates both bolts, outside trim remains locked. Key either side unlocks outside trim allowing latch bolt actuation. Auxiliary latch deadlocks latch bolt. CLM9974 RH Ea. 1,067 CLM9974 LH Ea. 1,067 CLM9974 RHR Ea. 1,067 CLM9974 LHR Ea. 1,067 Special Order; lead time up to 5 weeks. NOTES: Reference handing diagram and hand according to the locked side of the opening. Lever handles must be specified. Levers marked as N/C are included in the base price of the lockset. Other levers are an upcharge, listed accordingly, see page 112. SFIC Cylinder C BA Core is part of base price; MKD (KD) comes with 1 control and 2 change keys. For Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways, page 11. Specify, 1/2" (12) or /8" (10) glass thickness. CLM9000 series does not come standard with a strike due to possible sidelite configurations. Customer must choose appropriate strike from the strike options on page 111 as an "add" option. * CF product is configured to order only. No finished goods part numbers exist. How to Determine Hand of Door LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE 110 July 19, 2018 Glass Systems and Solutions Price List #28

121 CLM9000 CLM9000 Lockset Strikes and Cast or Forged Levers Finish $ Model Ref. # UM Description 700 CLM9000 Strikes (Strikes ordered independently of lock) 5 DRS Rails, Channels & Ea Sidelite Mount Strike, Non-Handed (Cannot be used with 9974 deadbolt function) 650 Patch Fittings & Designer Pivots Ea Strike for jamb/wall installation, No sidelite, Non-Handed 155 Offset Hung Patch Fittings Ea.. Handed Strike for CLM9974 jamb/wall installation (RH) 155 Headers & Standard Cast or Forged Levers Ea.. Handed Strike for CLM9974 jamb/wall installation (LH) 155 Trim Ea. LRA N/C Ea. LCA N/C Ea. LTA N/C Ea. LGA Supplied only in a complimentary 500 finish (BHMA 626) L118A Ea. L118A N/C LFA Ea. LFA Supplied only in a complimentary 500 finish (BHMA 626) N/C N/C MANET Sliding Pulls & Closers & Systems Handles LVA Ea. LVA Supplied only in a complimentary 500 finish (BHMA 626) N/C Panic 5 Custom Fabricated; lead time up to 5 business days. Glass Systems and Solutions Price List #28 July 19,

122 CLM9000 CLM9000 Cast or Forged Levers Finish $ Model Ref. # U/M Description 700 Premium Cast or Forged Levers Ea. LAA Ea. LDA Supplied only in a complimentary 500 finish (BHMA 626) Ea. LNA Supplied only in a complimentary 500 finish (BHMA 626) Ea. L110A Ea. L114A Supplied only in a complimentary 500 finish (BHMA 626) 5 L109A Ea. L109A 5 L112A Ea. L112A 5 L117A Ea. L117A 5 5 Custom Fabricated; lead time up to 5 business days. NOTES: All levers standard with "A" style Rose. "LL" = Less Lever/ Rose Set, deduct $10. Lead time for premium levers will be determined by availability at the time order is placed. Premium levers are MTO (manufactured to order). 112 July 19, 2018 Glass Systems and Solutions Price List #28

123 CLM9000 Cylinder Types, Keying Options, and Keyways Cylinder Option Description Deduct $ L Lock less cylinder and cylinder ring Example: CLM9070L Deduct 75 Interchangeable Core Cylinders C SFIC Housing with combinated SFIC construction core installed at thefactory; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D100 keyway Keys sold separately MKD Masterkeyed, Keyed Different (Keyed different to a random combination) or Keyed Alike; BA Core with 1 control key and 2 change keys; Up to 20 days additional lead time for Keyed Alike. Keys included Example: CLM9070C J SFIC Housing with disposable plastic SFIC plug Example: CLM9070J T SFIC Housing with keyed temporary SFIC construction core (Core may be returned for a full refund) Keys sold separately Example: CLM9070T N/C N/C Deduct 45 Deduct 5 R Schlage LFIC Housing less core CLM9070R Deduct 7 European Profile Cylinders Euro opt 1 Master keying for Euro Profile, single cylinder* (Up to 20 days additional lead time) Deduct 29 Euro opt 1 Master keying for Euro Profile, double cylinder* (Up to 20 days additional lead time) Conventional Cylinders (non-interchangeable core) D Conventional cylinder Example: CLM9070D N/C Deduct 45 KD Keyed differently to a random combination; SC keyway with 2 keys (default) Deduct 45 KA2 Keyed alike in pairs to a random combination; SC keyway with 2 keys Deduct 45 NSK Keyed alike (or Keyed to Order - KTO) sets of or more; SC keyway with 2 keys Deduct 1-Bit SC Operated by 1-bit key (sold separately); SC, SE keyway with 2 key blanks Deduct 45 0-Bit D-100 D100 keyway Keys sold separately Deduct 45 0-Bit Operated by a key blank; AA, CA, CB, CC, CD, CE, RA, RB, GA, SF, WA, YA, YG keyways with 2 keys Deduct MKD Master keyed; SC, SE, or D100 keyway Keys sold separately Deduct 29 CMK Construction master keyed single cylinder locks Keys sold separately Deduct 27 Cut Keys Ordered Separately Part # Description List $ SFIC Cut Key change key, master key, construction master key, or control key; BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE keyways SFIC Cut Key change key, master key, or control key; SKC keyways D100 etc CONV/LFIC Cut Key 1-Bit key for operating 1-bit cylinders SC, SE keyways 4 Locks will be supplied with SFIC C cylinder, Option BA MKD (KD). Denotes keys must be ordered separately. NOTES: M9985D and M9986D are available MKD, CMK, or 0-bit only. Emergency keys for M9985D and M9986D are or D100 keyway is restricted. Call customer service for dormakaba SKC policies. Up to 20 days additional lead time DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

124 Studio and Junior Studio Lockset Housings and Strikes Finishes $ Model Ref. # U/M Description / /502 Studio Rondo Lockset Housings for Jambs or Sidelite Applications Non-Locking Ea. /8" (10) Ea. 1/2" (12) Non-Locking, Lever at Latch End Ea. /8" (10) Ea. 1/2" (12) Locking (Prepared for Europrofile Cylinder) Ea. /8" (10) Ea. 1/2" (12) Locking, Privacy Function, Thumb Turn Included Ea. /8" (10) Ea. 1/2" (12) Strike Housing (Sidelite Mount) Ea. /8" (10) Ea. 1/2" (12) Studio Classic Lockset Housings for Jambs or Sidelite Applications 109 Non-Locking Ea. /8" (10) Ea. 1/2" (12) Non-Locking, Lever at Latch End Ea. /8" (10) Ea. 1/2" (12) Locking (Prepared for Euro Cylinder) Ea. /8" (10) Ea. 1/2" (12) Locking, Privacy Function, Thumb Turn Cylinder Included Ea. /8" (10) Ea. 1/2" (12) Strike Housing (Sidelite Mount) Ea. /8" (10) Ea. 1/2" (12) Corner Strike Plate Ea. 15/16" (24) Return Ea. 5/8" (16) Return 25 7 Strike Plate Ea. Stainless Steel Base Ea. Brass Base 17 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Levers are ordered seperately for all locksets, See page 117. Studio are shipped right hand reverse. Field adjustable to left hand levers LHR Lockset Requires RH cylinder, RHR Lockset requires LH cylinder. 114 July 19, 2018 Glass Systems and Solutions Price List #28

125 Studio and Junior Junior Office Lockset Housings and Strikes Finishes $ Model Ref. # U/M /502 DRS Rails, Channels & Junior Office Lockset Housings for Jamb or Sidelite Applications Non-Locking Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Locking, (Prepared for Europrofile Cylinder) Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Strike Housing (Sidelite Mount) Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Junior Models Ea. Strike Plate (Double) Ea. Strike Plate (Double) Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Levers are ordered separately for all locksets. See page 117. LHR Lockset requires RH cylinder; RHR Lockset requires LH cylinder. How to Determine Hand of Door Lock RHR Lock LHR Strike LHR Strike RHR LH LEFT HAND INSIDE OUTSIDE RH RIGHT HAND Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Lock LHR Lock RHR Strike RHR Strike LHR Panic Glass Systems and Solutions Price List #28 July 19,

126 Studio and Junior Junior Office Classic Lockset Housings and Strikes Finishes $ Model Ref. # U/M Description Junior Office Classic Lockset Housings for Jamb or Sidelight Applications Non-Locking Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Locking (Prepared for Euro Cylinder) Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Strike Housing (Sidelite Mount) Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Ea. Strike Plate (Double) Ea. Strike Plate (Double) Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Levers are ordered separately for all locksets. See page 117. LHR Lockset requires RH cylinder; RHR. Lockset requires LH cylinder. How to Determine Hand of Door Lock RHR Lock LHR Strike LHR Strike RHR LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Lock LHR Lock RHR Strike RHR Strike LHR 116 July 19, 2018 Glass Systems and Solutions Price List #28

127 Studio and Junior Studio and Junior Levers, Knob, and Finishes $ Model Ref. # U/M Description Lever Sets DRS Rails, Channels & Ea. Flat (471) Ea. Tubular (467.1) Patch Fittings & Designer Pivots Ea. Flat Lever w/knob One Side (450.20) Offset Hung Patch Fittings Ea. Angular Lever Headers & Ea. Knob, Round (450.0) Lever Sets 50/ Ea. Profile Key Cylinder (Euro Cylinder) Ea. Profile Thumb Turn Cylinder, Right Hand Cam Ea. Left Handed Cam Add, Profile Thumb Turn Cylinder. Master keying for Euro Profile (Double cylinder [CYLxCYL] = $2 add). Up to 20 days additional lead time. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Euro cylinders are KA by default and KD is a special order. LHR Lockset requires RH cylinder; RHR Lockset requires LH cylinder. For 108 or 109 finish requirements, specify 199 finish and specify "to be finished black or dark bronze." Check with factory for availability of 501 or 502 finish requirements. MKD (Master Keying) for Euro Profile cylinders, $16 list add per keyway (Double cylinder [CYLxCYL] = $2 add). Up to 20 days additional lead time. LH LEFT HAND INSIDE OUTSIDE INSIDE List ADD $ Per keyway 16 RH RIGHT HAND MANET Sliding Pulls & Closers & Systems Handles LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Panic Glass Systems and Solutions Price List #28 July 19,

128 ARCOS ARCOS Lockset Housings and Strikes Finishes $ Model Ref. # U/M Description ARCOS Studio Lockset Housings for Jamb or Sidelite Applications Non-Locking Ea. /8" (10) Ea. 1/2" (12) Non-Locking, Lever at Latch End Ea. /8" (10) Ea. 1/2" (12) Locking, (Prepared for Euro Cylinder) Ea. /8" (10) Ea. 1/2" (12) Locking, Privacy Function, Thumb Turn Included Ea. /8" (10) Ea. 1/2" (12) Strike Housing (Sidelite Mount) Ea. /8" (10) Ea. 1/2" (12) ARCOS Office Lockset Housings for Jamb or Sidelite Applications Non-Locking Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Locking (Prepared for Euro Cylinder) Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Strike Housing (Sidelite Mount) Ea. /8" (10) LHR Ea. /8" (10) RHR Ea. 1/2" (12) LHR Ea. 1/2" (12) RHR Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Levers are ordered separately for all locksets. See ARCOS. ARCOS Studio are shippe d right hand reverse. Field adjustable to left hand reverse. ARCOS Office left hand reverse shown. LHR Lockset requires RH cylinder; RHR Lockset requires LH cylinder. 118 July 19, 2018 Glass Systems and Solutions Price List #28

129 ARCOS ARCOS Finishes $ Model Ref. # U/M Description /99 Sets of Levers for Locks with Strikes DRS Rails, Channels & Ea. Tubular, Mitered /99 Patch Fittings & Designer Pivots Ea. Tubular, Oval Offset Hung Patch Fittings Ea. Angular Headers & NOTE: For 108 or 109 finish requirements, specify 199 finish and specify "to be finished black or dark bronze." Finishes $ Model Ref. # U/M Description 50/ Europrofile Ea. Profile Key Cylinder (Euro Cylinder) Ea. Profile Thumb Turn Cylinder, Right Hand Cam Ea. Profile Thumb Turn Cylinder, Left Hand Cam Master keying for Euro Profile (Double cylinder [CYLxCYL] = $2 add). Up to 20 days additional lead time. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Euro cylinders are KA by default and KD is a special order. LHR Lockset requires RH cylinders, RHR Lockset requires LH cyclinder. MKD (Master Keying) for Euro Profile cylinders, $16 list add per keyway (Double cylinder [CYLxCYL] = $2 add). Up to 20 days additional lead time. LH LEFT HAND INSIDE RH RIGHT HAND List ADD $ Per keyway 16 MANET Sliding Pulls & Closers & Systems Handles OUTSIDE INSIDE Panic LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Glass Systems and Solutions Price List #28 July 19,

130 Locks for Sliding Doors, Strikes, and Handles Finishes $ Model Ref. # U/M / /109 Hook Lock Ea. (Includes wall mounted strike plate) Strike Box Ea Set of Flat Lever Handles Set Set of Tubular Lever Handles Set Flush Pull Set Custom Fabricated; lead time up to 5 business days. 1 Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Cylinders supplied keyed different (KD). For other cylinder and keying options such as keyed alike (KA) See Cylinder Types, Keying Options, and Keyways. For 108 or 109 finish requirements, specify 199 finish and specify "to be finished black or dark bronze." 120 July 19, 2018 Glass Systems and Solutions Price List #28

131 Table of Contents Pulls and Handles Pulls and Handles for Tempered Glass Doors TG 18 Ladder Pulls Ordering Guide 122 TG 18 Locking and Non-Locking Single and Back-to-Back Ladder Pulls 12 TG Cylinder Types, Keying Options, and Keyways 126 TG 987 Ladder Pulls Ordering Guide 127 Stock Standard Size Non-Locking with Straight Fixing Posts 127 Custom Size Non-Locking with Straight Fixing Posts 129 MANET Pulls MANET Non-Locking with Straight Fixing Posts and MANET Clamping Disks 10 TG Decorative Pulls TG 9000 Decorative Pulls and Handles 12 ARCOS and BEYOND Pulls ARCOS and BEYOND Decorative Pulls and Handles 14 Economy Pulls Economical Tubular and Solid Pulls and Handles 15 Finger Pulls and Knobs Finger Pulls and Knobs for /8" (10) and 1/2" (12) Glass 16 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Panic MANET Sliding Pulls & Closers & Systems Handles Headers & Glass Systems and Solutions Price List #28 July 19,

132 Ordering Guide TG 18 Ladder Pulls TG 18 Ladder Pulls Ordering Guide Rose, up to -5/16" Sex Nut, up to -5/16" 1-/4" wood door, not through door Back-to-back up to -5/16" thick door Back-to-back 1-/4" wood Back-to-back /4" glass Back-to-back 1/2" glass, STD. Pkg TG 18 NL B2B STD 49 B2B C6 Model Locking Non-Locking TG 18 Function L NL Back-To-Back Single Sided B2B SNG Pull Type Door Thickness STD 49" Length 60" Length 72" Length 84" Length XX" (Specify) Length 14 1-/4" Wood Door 75 5/8"or /4" Glass /8" or 1/2" Glass Custom (L) Length Screwpack ROSE SNUT BLIND B2B80 B2B44 B2B19 B2B12 75ADAPT Satin Stainless 700 Custom Polished Finish 701 Custom Paint 999 or Powder Finish XXXX D L J T C C6 R THB Cylinder Type Conventional See Page 126 for Keying Cylinder Options Keying Options Less Conventional Cylinder Less SFIC Temporary SFIC Core 7-Pin SFIC Core 6-Pin SFIC Core Schlage LFIC (Less Core) Thumb Turn Single Pull Handle 122 July 19, 2018 Glass Systems and Solutions Price List #28

133 TG 18 Ladder Pulls Pulls and Handles TG 18 Locking and Non-Locking Ladder Pulls Locking Ladder Pull Configurations Single and Back-To-Back Locking and Non-Locking Pulls Standard Finish $ Custom Finish $ No. Of Model Ref. # U/M Description Fixing Posts Back-to-Back Locking Ladder Pull with C Small Format Interchangeable Core (SFIC) Cylinder, BA Core MKD (KD) Set F L B2B STD 84 (214) 700 1,470 1, Set F L B2B STD 72 (1829) 700 1,4 1, Set F L B2B STD 60 (1524) 700 1,99 1, Set 2F L B2B STD 49 (1245) 700 1,4 1,72 Offset Hung Patch Fittings DRS Rails, Channels & Patch Fittings & Designer Pivots Single Sided Locking Ladder Pull with C Cylinder (SFIC), BA Core MKD (KD), or Thumb-Turn (TT) Ea. 2F L SNG STD 49 (1245) CYL Ea. 2F L SNG STD 49 (1245) TT Headers & NOTE: Cylinder or Thumb-Turn are Top Mounted Back-to-Back Non-Locking Ladder Pull Single Sided Non-Locking Ladder Pull Ea. F NL B2B STD 84 (214) Ea. F NL B2B STD 72 (1829) Ea. F NL B2B STD 60 (1524) Ea. 2F NL B2B STD 49 (1245) NOTE: Non-locking ladder pulls are stocked in single units. Specify 2 Ea. during ordering for a back-to-back set. Includes appropriate fixings Ea. F NL SNG STD 84" (214) Ea. F NL SNG STD 72" (1829) Ea. F NL SNG STD 60" (1524) Ea. 2F NL SNG STD 49" (1245) MANET Sliding Pulls & Closers & Systems Handles NOTE: Customer must specify Fixing Pack and adjust List Price accordingly for Non-Locking Single Ladder Pulls. Special Fabricated/Finish or Special Order; lead time up to 9 weeks. 5 Non-Fabricated item, ships in 5 business days. NOTES: Default cylinder for TG 18 L pulls uses SFIC C Cylinder BA Core. Other cylinder and keying options available, see Cylinder Types, Keying Options, and Keyways, page Finish is Custom Paint and Powder only. Default glass thickness is /8" (10) /4" (19) for non-locking pulls. For locking pulls default glass thickness is /8 (10) 5/8 (16). For locking pulls with */4" (19) thick glass order from following page. Panic Glass Systems and Solutions Price List #28 July 19,

134 Pulls and Handles TG 18 Ladder Pulls TG 18 Locking and Non-Locking Ladder Pulls Mounting Ref. # Description List $ Adaptor,.75 adaptor allows NL Pull to install in Locking Post Prep Strike, Dustproof, Standard 1-1/8" (29) 7 Door Thickness Locking Post Mounting Pack, Back-to-back, (Non-Locking Post Fasteners not incluided) 1-/4" (44) Mounting Pack, Back-to-back, Non-Locking /8" (10) /4" (19) Locking Post Mounting Pack, Back-to-back, (Non-Locking Post Fasteners not incluided) /4" (19) Mounting Pack, Back-to-back Non-Locking Post 1-/8" (4) 1-/4" (44) July 19, 2018 Glass Systems and Solutions Price List #28

135 TG 18 Ladder Pulls Pulls and Handles Mounting Ref. # Description Door Thickness List $ Mounting Pack, SNG Blind, each in pack (Will not project through door) Mounting Pack, Single Non-Locking Sex Nut min. 1-/4" (44) 25 /4" (19) -1/8" (80) 56 Panic DRS Rails, Channels & Offset Hung Patch Fittings Patch Fittings & Designer Pivots Mounting Pack, Single Non-Locking Rose /8" (10) /4" (19) 54 Headers & Special Fabricated/Finish or Special Order; lead time up to 9 weeks. MANET Sliding Pulls & Closers & Systems Handles Locking Post Replacement Set for Standard 1/2" Glass Thickness NOTE: Default cylinder for Locking Ladder pulls uses SFIC T cylinder with temporary construction core in 626 Satin. Other cylinder and keying options available, see next page. 1/2" (1) Washer Pack 14 Glass Systems and Solutions Price List #28 July 19,

136 Pulls and Handles TG 18 Ladder Pulls Cylinder Types, Keying Options, and Keyways Cylinder Option Description Deduct $ L Lock less cylinder and cylinder ring Example: CLM9070L Deduct 75 Interchangeable Core Cylinders C SFIC Housing with combinated SFIC construction core installed at thefactory; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D100 keyway Keys sold separately MKD Masterkeyed, Keyed Different (Keyed different to a random combination) or Keyed Alike; BA Core with 1 control key and 2 change keys; Up to 20 days additional lead time for Keyed Alike. Keys included Example: CLM9070C J SFIC Housing with disposable plastic SFIC plug Example: CLM9070J T SFIC Housing with keyed temporary SFIC construction core (Core may be returned for a full refund) Keys sold separately Example: CLM9070T N/C N/C Deduct 45 Deduct 5 R Schlage LFIC Housing less core CLM9070R Deduct 7 European Profile Cylinders Euro opt 1 Master keying for Euro Profile, single cylinder* (Up to 20 days additional lead time) Deduct 29 Euro opt 1 Master keying for Euro Profile, double cylinder* (Up to 20 days additional lead time) Conventional Cylinders (non-interchangeable core) D Conventional cylinder Example: CLM9070D N/C Deduct 45 KD Keyed differently to a random combination; SC keyway with 2 keys (default) Deduct 45 KA2 Keyed alike in pairs to a random combination; SC keyway with 2 keys Deduct 45 NSK Keyed alike (or Keyed to Order KTO) sets of or more; SC keyway with 2 keys Deduct 1-Bit SC Operated by 1-bit key (sold separately); SC, SE keyway with 2 key blanks Deduct 45 0-Bit D-100 D100 keyway Keys sold separately Deduct 45 0-Bit Operated by a key blank; AA, CA, CB, CC, CD, CE, RA, RB, GA, SF, WA, YA, YG keyways with 2 keys Deduct MKD Master keyed; SC, SE, or D100 keyway Keys sold separately Deduct 29 CMK Construction master keyed single cylinder locks Keys sold separately Deduct 27 Cut Keys Ordered Separately Part # Description List $ SFIC Cut Key change key, master key, construction master key, or control key; BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE keyways SFIC Cut Key change key, master key, or control key; SKC keyways D100 etc CONV/LFIC Cut Key 1-Bit key for operating 1-bit cylinders SC, SE keyways 4 Locks will be supplied with SFIC C cylinder, Option BA MKD (KD). Denotes keys must be ordered separately. NOTES: M9985D and M9986D are available MKD, CMK, or 0-bit only. Emergency keys for M9985D and M9986D are or D100 keyway is restricted. Call customer service for dormakaba SKC policies. Up to 20 days additional lead time 126 July 19, 2018 Glass Systems and Solutions Price List #28

137 TG 9000 Ladder Pulls Ordering Guide TG 987 Ladder Pulls Ordering Guide S-TG 987 SNG S-TG 987 Model /8" Thick Glass Screw Pack 1/2" Thick Glass Screw Pack 5/8" Thick Glass Screw Pack /4" Thick Glass Screw Pack 1-/8" Thick Wood Screw Pack 1-/4" Thick Wood Screw Pack >1-/4" Thick Wood Screw Pack Single Sided Back-To-Back SNG B2B Pull Type Door Thickness /8 1/2 5/8 / other 12" Length 18" Length 6" Length 42" Length (L) Length 60" Length SNG Mounting Type ROSE BLIND dormakaba 700/ BHMA 60 Finish Screw-on-Rose Concealed BLIND Finish DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Stock TG 987 Standard Size Non-Locking Ladder Pulls, with Straight Fixing Posts Stock Pull Handles for 1/2" Glass Doors Finish $ Model Ref. # U/M No. Of Fixing Posts Description 700 Back-to-Back 1-1/4" (2) Dia. B2B Set F L = 60" (1524) CTC = 7-1/2" (95) 245 B2B Set 2F L = 42" (1067) CTC = 26-1/4" (667) 168 B2B Set 2F L = 6" (914) CTC = 22-1/2" (572) 152 B2B Set 2F L = 18" (457) CTC = 11-1/4" (286) 122 B2B Set 2F L = 18" (457) CTC = 12" (05) 122 B2B Set 2F L = 12" (05) CTC = 7-1/2" (191) 114 Single Sided 1-1/4" (2) Dia. SNG Ea. F L = 60" (1524) CTC = 7-1/2" (95) 125 SNG Ea. 2F L = 42" (1067) CTC = 26-1/4" (667) 85 SNG Ea. 2F L = 6" (914) CTC = 22-1/2" (572) 77 SNG Ea. 2F L = 18" (457) CTC = 11-1/4" (286) 62 SNG Ea. 2F L = 18" (457) CTC = 12" (05) 62 SNG Ea. 2F L = 12" (05) CTC = 7-1/2" (191) 58 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES: Prefix Ref. # with (SNG) single or (B2B) back-to-back. Specify part number, pull height, door material, and door thickness. For single pull on wood door, specify roses or blind fasteners. Inserts and mounting hardware included in stock pull TG 987, list price as shown. Mounting hardware also available as multi-pack service packs and priced seperately following pulls. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

138 Pulls and Handles TG 9000 Ladder Pulls Model Ref. # U/M Description List $ Set Service inserts, reduces post thread from 8 mm 6 mm, used for every mounting post. Bulk pack of 6. Used as service item Set Service mounting pack with finished mounting ROSE used for SNG GLASS mount /8" /4" (10 19). Bulk pack of 6. Used as service item Set Service mounting pack used for BACK-TO-BACK GLASS mount /8" /4" (10 19). Bulk pack of 6. Used as service item Set Service mounting pack with finished mounting ROSE used for SNG WOOD mount 1-/8" 2" (40 51). Bulk pack of 6. Used as service item Set Service mounting pack used for BACK-TO-BACK WOOD mount 1-/8" 2" (40 51). Bulk pack of 6. Used as service item Set Service mounting pack with BLIND (concealed) fasteners, used for SNG WOOD mount 1-/8" (40). Bulk pack of 6. Used as service item. 17 øg 1-1/4" (2) øs 1" (25) S G 60" (1524) 42" (1067) 6" (914) 18" (457) 12" (05) H -/8" (85) fixings required 60" (1,524) Customer Specifies C to C Customer Specifies Overall Length (CTC) Center-to-Center 7-1/2" (95) 26-1/4" (667) 22-1/2" (571) 11-1/4" (286) 12" (05) 7-1/2" (191) L (Length) 60" (1,524) 42" (1,067) 6" (914) 18" (457) 18" (457) 12" (05) H 128 July 19, 2018 Glass Systems and Solutions Price List #28

139 TG 9000 Ladder Pulls Pulls and Handles TG 987 Custom Size Non-Locking Ladder Pulls, with Straight Fixing Posts Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Back-to-Back 1-1/4" (2) Dia Ea. F L = 94-1/2" through 110-/16" 1,091 1,200 1, Ea. F L = 74-1/16" through 94-7/16" 944 1,08 1, Ea. 2F L = 59-1/16" through 74-/4" , Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Single Sided 1-1/4" (2) Dia Ea. F L = 94-1/2" through 110-/16" Ea. F L = 74-1/16" through 94-7/16" Ea. 2F L = 59-1/16" through 74-/4" Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Back-to-Back 1" (25) Dia Ea. F L = 94-1/2" through 110-/16" 950 1,045 1, Ea. F L = 74-1/16" through 94-7/16" , Ea. F L = 59-1/16" through 74-/4" , Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Single Sided 1" (25) Dia Ea. F L = 94-1/2" through 110-/16" Ea. F L = 74-1/16" through 94-7/16" Ea. F L = 59-1/16" through 74-/4" Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 øg 1" (25) 1-1/4" (2) øs 11/16" (18) 1" (25) H 2-15/16" (75) -/8" (85) fixings required 59-1/16" (1,500) 59-1/16" (1,500) Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: When required, rd fixing post is centered on L dimension unless otherwise requested. Any center distance specifically tailored to your requirements. Specify door thickness and desired screwpack. Customer Specifies C to C S G Customer Specifies Overall Length DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles H Panic Glass Systems and Solutions Price List #28 July 19,

140 Pulls and Handles MANET Pulls MANET Non-Locking Ladder Pulls, with Straight Fixing Posts and MANET Clamping Disks Pull Handles for /8" (9) or 1/2" (12) Glass Doors, Back-to-Back (B2B) or Single Sided Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Back-To-Back Ea. 4F 20-1/2" (520) Center-to-Center Length 69-5/16" (1760) 607 1, /2" (520) 48-1/16" (1240) 20-1/2" (520) 69-5/16" (1760) Ea. F 20-1/2" (520) Center-to-Center Length 48-1/16" (1240) 505 1, Ea. 2F 20-1/2" (520) Center-to-Center Length 28-/8" (720) /4" (50) 20-1/2" (520) 28-/8" (720) 5-7/8" (150) Ea. 2F 5-7/8" (150) Center-to-Center Length 1-/4" (50) Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Specify door thickness. Specify for 1-/4" (44) wood door fasteners, no additional charge. 10 July 19, 2018 Glass Systems and Solutions Price List #28

141 MANET Pulls Pulls and Handles Pull Handles for /8" (9) or 1/2" (12) Glass Doors, Back-to-Back (B2B) or Single Sided Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Single Sided Ea. 4F 20-1/2" (520) Center-to-Center Length 69-5/16" (1760) /2" (520) DRS Rails, Channels & 69-5/16" (1760) Offset Hung Patch Fittings Patch Fittings & Designer Pivots Ea. F 20-1/2" (520) Center-to-Center Length 48-1/16" (1240) /2" (520) 20-1/2 (520) 5-7/8" (150) 48-1/16" (1240) 28-/8" (720) 1-/4" (50) Ea. 2F 20-1/2" (520) Center-to-Center Length 28-/8" (720) Ea. 2F 5-7/8" (150) Center-to-Center Length 1-/4" (50) Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Headers & MANET Sliding Pulls & Closers & Systems Handles Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Specify door thickness. Specify for 1-/4" (44) wood door fasteners, no additional charge. Panic Glass Systems and Solutions Price List #28 July 19,

142 Pulls and Handles TG Decorative Pulls TG 95 Decorative Pulls, Straight Pull with Mitered Corners/Posts Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Back-to-Back 1-1/4" (2) Dia Ea. F CTC = 94-1/2" through 110-/16" 1,002 1,102 1, Ea. F CTC = 74-1/16" through 94-7/16" , Ea. F CTC = 59-1/16" through 74-/4" , Ea. 2F CTC = 4-5/16" through 59" Ea. 2F CTC = 27-9/16" through 4-1/4" Ea. 2F CTC = 7-7/8" through 27-1/2" Single Sided 1-1/4" (2) Dia Ea. F CTC = 94-1/2" through 110-/16" Ea. F CTC = 74-1/16" through 94-7/16" Ea. F CTC = 59-1/16" through 74-/4" Ea. 2F CTC = 4-5/16" through 59" Ea. 2F CTC = 27-9/16" through 4-1/4" Ea. 2F CTC = 7-7/8" through 27-1/2" Back-to-Back 1" (25) Dia Ea. F CTC = 94-1/2" through 110-/16" 1,265 1,92 1, Ea. F CTC = 74-1/16" through 94-7/16" 1,120 1,22 1, Ea. F CTC = 59-1/16" through 74-/4" 975 1,07 1, Ea. 2F CTC = 4-5/16" through 59" , Ea. 2F CTC = 27-9/16" through 4-1/4" Ea. 2F CTC = 8-1/4" through 27-1/2" Single Sided 1" (25) Dia Ea. F CTC = 94-1/2" through 110-/16" Ea. F CTC = 74-1/16" through 94-7/16" Ea. F CTC = 59-1/16" through 74-/4" Ea. 2F CTC = 4-5/16" through 59" Ea. 2F CTC = 27-9/16" through 4-1/4" Ea. 2F CTC = 8-1/4" through 27-1/2" Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: When required, rd fixing post is centered on CTC dimension unless otherwise requested. CTC = Center-to-center of mounting posts. Specify Door thickness and desired screwpack. 12 July 19, 2018 Glass Systems and Solutions Price List #28

143 l TG Decorative Pulls Pulls and Handles TG Decorative Pulls Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Standard Finish $ Custom Finish $ Model Ref. # U/M Description TG 980 Bowed Pull, 1-/4" (49) Center-to-Center DRS Rails, Channels & Set Back-to-Back /16" (0 mm) 9/16" (15 mm) 1-/4" (50 mm) Ea. Single Sided Patch Fittings & Designer Pivots 1-/16" 1-/4" (0 mm) (45 mm) -11/16" (9 mm) TG 904 Curved Pull, Radius Standoff, 1-1/4" (2) Diameter, 1-/4" (49) Center-to-Center Set Back-to-Back Offset Hung Patch Fittings Ea. Single Sided CTC R B R 1 Ø 1-1/4" (2) R 1-/4" (44) R1 6-7/8" (175) B 8-11/16" (220) Headers & H H -/8" (85) CTC 1-/4" (50) TG 906 Curved Pull, Sharp/Straight Standoff, 1-9/16" (40) Dia. 1-/4" (49) Center-to-Center Set Back-to-Back Ea. Single Sided øs 1-/4" (50 mm) M B H øg R ØGØS 1-9/16" (40) R 6-7/8" (175) B 8-/16" (205) H -15/16" (100) M 1" (24) NOTE: Specify door thickness and desired screwpack. Fixings for TG Handles to Glass Doors 5/16" (8) 9/16" (15) Thick 700/ Ea. Back-to-Back M Ea. Back-to-Back M Ea. Single Sided M Ea. Single Sided M Fixings for TG Handles to Glass Doors 1-/8" (5) -15/16" (100) Thick Ea. Back-to-Back M Ea. Back-to-Back M Ea. Single Sided M Ea. Single Sided M Rose Options for TG Pulls MANET Sliding Pulls & Closers & Systems Handles Ea. 1-9/16" (40) Rose M Ea. 1-/4" (44) Rose M Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Panic Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Systems and Solutions Price List #28 July 19,

144 Pulls and Handles ARCOS and BEYOND Pulls ARCOS and BEYOND Decorative Pulls Pulls for /8" (10) and 1/2" (12) Glass Doors Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description ARCOS 15-11/16" (98) Length Set 2F 1-/4" (50) Center-to-Center ARCOS 2-7/16" (824) Length Set 2F 29-1/2" (750) Center-to-Center BEYOND, Specify Door Thickness Set 2F 17-/4" (450) Center-to-Center /8" (10) or 1/2" (12) Set 2F 2-5/8" (600) Center-to-Center /8" (10) or 1/2" (12) Set 2F 5-7/16" (900) Center-to-Center /8" (10) or 1/2" (12) 815 1, ,145 1,128 1,528 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTE: Specify door thickness. 14 July 19, 2018 Glass Systems and Solutions Price List #28

145 Economy Pulls Pulls and Handles Economy Pulls Solid & Tubular Pull Handles for /8" (10) & 1/2" (12) Glass Finishes $ Model Ref. # U/M Description / / Solid and Tubular, Back-to-Back, 10" and 12" (Center-to-Center) Handles DRS Rails, Channels & Set 10" (254) Solid Set 10" (254) Tubular Set 12" (05) Solid Set 12" (05) Tubular Patch Fittings & Designer Pivots Solid and Tubular, Single Sided, 10" and 12" (Center-to-Center) Handles Offset Hung Patch Fittings Ea. 10" (254) Solid Ea. 10" (254) Tubular Ea. 12" (05) Solid Ea. 12" (05) Tubular Headers & Solid and Tubular, Back-to-Back Offset, 10" and 12" (Center-to-Center) Handles Set 10" (254) Tubular Set 12" (05) Solid Set 12" (05) Tubular Solid and Tubular, Back-to-Back, 10" and 12" (Center-to-Center) 27-/4" Handles Set 10" 27-/4" ( ) Solid Non-Fabricated item, 2-day lead time Set 10" 27-/4" ( ) Tubular Set 12" 27-/4" (05 705) Solid Set 12" 27-/4" (05 705) Tubular Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES: Tubular handles include a 1-1/4" (2) washer. Specify Door thickness. Call customer service for door thicknesses 1-/8" 2-1/2" (4 6) for fastener pack ordering guidance MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

146 Pulls and Handles Economy Pulls Finger Pulls and Knobs for /8" (10) and 1/2" (12) Glass Finishes $ Model Ref. # U/M Description Finger Pulls Set Flush Pull Knobs List $ Ea. Glass Knob Non-Fabricated item, 2-day lead time. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 16 July 19, 2018 Glass Systems and Solutions Price List #28

147 Table of Contents Sliding Systems Sliding Systems MUTO Premium and Comfort with Glass Panels Ordering Guide 18 Door Panel Sizing Height 19 Door Panel Sizing Width 141 DRS Rails, Channels & Ceiling Recessed Mount (CE-R) Applications 142 MUTO Premium XL 150 DORMOTION 14 MUTO Premium XL MUTO Premium XL 120 Self-Closing 155 MUTO Premium XL 80 DORMOTION 161 Patch Fittings & Designer Pivots MUTO Premium XL 80 Telescopic 167 MUTO Comfort L 80 DORMOTION 175 MUTO Comfort L MUTO Comfort M Offset Hung Patch Fittings Options & Roller Accessory Kits 186 Gasket Sets 186 Floor Guide 186 Track and Cover Extrusions 187 Wood Adapter Sets 188 Headers & Cover Clips 188 Endcaps 189 DORMOTION Accessory and Start/Stop Kits 189 Synchro 190 Self-Closing 190 Brush Profiles and Seals 191 Endstops 191 Bumper Sets 192 Holder Hook Sets 192 Sidelite (Fixed Panel) Sidelite Kits, Extrusions and 192 Recessed Mount 194 Electronic Lock Status Indicator 195 Fastener Packs 195 Tempered Laminated Glass (TLG) 195 TLG Gasket Sets 195 Carrier Locating Tool / Comfort Tool Kit 195 DRS-120 and RS-120 Ordering Guide DRS-120 and RS DRS-120 Ceiling Mount Sliding Systems 197 DRS-120 and Components 201 RS-120 Wall and Ceiling Mount Sliding Systems 202 RS-120 and Components 206 MANET Sliding Pulls & Closers & Systems Handles Handle Options Sliding Applications Handle Options 208 Panic Glass Systems and Solutions Price List #28 July 19,

148 Sliding Systems MUTO Ordering Guide MUTO Ordering Guide 4P 1P 2P 1P M L XL MUTO PREMIUM XL Portfolio L and M XL COMFORT PREMIUM Model Sliding Panels Four Sliding Panels (XL 80 TEL Bi-Part) One Sliding Panel Two Sliding Panels 1 System Capacity 0 lb (150 kg) 264 lb (120 kg) (SC only) 176 lb (80 kg) 110 lb (50 kg) Medium Heavy Extra Heavy System Type TEL Telescopic Self-Closing SC SYNCHRO 80 2 (120 only) Other DMSC 50 System DM Type Door Weight Options Sliding Panel Thickness 4 WD 8MM 10MM 12MM 1.5MM MM 1-/8" to 1-1/2" (5 to 50) Wood Door (Default 1-/4") 5/16" (8) /8" (10) 1/2" (12) 9/16" (1.5) Laminated continued below 2 Panels Move Simultaneously (N/A with DORMOTION) Dampener (DORMOTION) for SC units opening cycle DORMOTION Mount Type CE-S CE-R W G Ceiling Mount - Surface Ceiling Mount - Recessed Wall Mount Glass Mount Door Panel Width (DW) Sliding Panel Width SPECIFY Miter MITER MUTO Finish Special (Powder Coat/Paint) 4 Special Anodized 4 Similar to Stainless Steel (SSS) (619 as of January 2018) Clear Anodized Aluminum (628 as of January 2018) No Fixed Panel 1 Fixed Panel 1FP 2 Fixed Panel 2FP Fixed Panels SPECIFY PNL 1 SPECIFY PNL 2 Fixed Panel Widths TLG Tempered Laminated Glass SI ELCK Status Electronic Indicator Lock 1 Two bi-parting panels or two panels for single telescopic. 2 MUTO Premium XL 80 not available Less DORMOTION. Minimum and maximum panel widths vary by MUTO model. 4 For custom 199 or 99 finishes, there may be minimum order quantities based on minimum lot charges. Lead time will be extended. 5 Dimensions are converted from millimeters to the closest 1/16" where possible. Always verify with Technical Service for critical dimension verifications. 6 One (1), three (), and five (5) day lead time kits are based on maximum order of ten (10) units. 7 Default wood door thickness will be 1-/4" (44) unless otherwise specified. 8 Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end and may need cut in field for surface applied units. Clamp marks are typically hidden once installed for CE-R units. 18 July 19, 2018 Glass Systems and Solutions Price List #28

149 MUTO Door Panel Sizing Sliding Systems MUTO Door Panel Sizing DISCLAIMER When sizing MUTO door panels, maximum weight capacity is key. When maximizing door panel width, height, or thickness, one or more of the other dimensions (width, height, or thickness) will require reductions to remain at or below the maximum allowable weight capacity of the specific MUTO sliding unit, within industry codes, standards, or specifications, and within door manufacturer recommendations. All formulas apply to both glass and wood panel Always refer to Glass Association of North America (GANA) when sizing tempered glass doors. KEY Wall Mount X = Top of Clear Opening to Bottom Edge of Track GH = Door (Glass) Height CH = Clear Opening Height Glass Mount TH = Finished Floor to Top of Track (Total Height) GH = Door (Glass) Height CH = Clear Opening Height Y = Varies based on glass thickness Ceiling Mount TH = Finished Floor to Top of Track (Total Height) GH = Door (Glass) Height Fixed Panel Ceiling Mount TH = Finished Floor to Top of Track (Total Height) GH = Door (Glass) Height CH = Clear Opening Height FPH = Fixed Panel Height Y = Varies based on glass thickness Door Panel Height Formulas Wall Mount (XL) GH = CH + 7/8" (22) + X (L, M) GH = CH + /4" (18) + X (XL) 1/16" (20) (L) 11/16" (17) (M) 5/8" (16) CH X DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic (XL) GH = TH 1-7/8" (47) (L, M) GH = TH 1-9/16" (40) (XL) 1-1/4" (2) /8" ±/16" (10 ±5) Ceiling Mount (XL) GH = TH 1-7/8" (47) (L, M) GH = TH 1-9/16" (40) TH (L, M) 1-1/16" (27) (XL) GH = CH + 7/8" (22) + X (L, M) GH = CH + /4" (18) + X Glass Mount (XL) GH = TH 1-7/8" (47) (L) GH = TH 1-9/16" (40) /8" ±/16" (10 ±5) CH CH TH /8" ±/16" (10 ±5) (XL) 1-/4" (45) (L) 1-/8" (4) (XL) 2-1/8" (54) (L) 1-11/16" (4) (L) 1-/16" (0) FPH = CH + 1/8" () (XL) 1/16" (20) (L) 11/16" (17) Y Y (XL) 1-15/2" (7) (XL) GH = TH 1-7/8" (47) (L) GH = TH 1-9/16" (40) 1/2" (1) 1/2" (12) 1/2" (1) /8" ± /16" (10 ± 5) (XL) 1-1/4" (2) (L) 1-1/16" (27) (XL) GH = TH 1-7/8" (47) (L) GH = TH 1-9/16" (40) Fixed Panel (Sidelite) Ceiling Mount (XL) GH = TH 1-7/8" (47) FPH = CH + 1/8" () (L) GH = TH 1-9/16" (40) FPH = CH + 1/8" () TH Glass Systems and Solutions Price List #28 July 19,

150 Sliding Systems MUTO Door Panel Sizing MUTO Door Panel Sizing Single Door Width Formulas KEY DW = Door Panel Width CW = Clear Opening Width TL = Track Length FPW = Fixed Panel Width Single Door Wall Mount (XL, L, M) DW = CW + 2-/8" (60)* TL = 2 x DW Single Door Ceiling Mount (XL, L, M) DW = CW + 2-/8" (60)* TL = 2 x DW 1-/16" (0) 1-/16" (0) 1-/16" (0) 1-/16" (0) CW CW DW = CW + 2-/8" (60) * If single door panel closes against jamb or only overlaps on one side, subtract 1-/16" (0) from formula. *DW = CW + 2-/8" (60) * If single door panel closes against jamb or only overlaps on one side, subtract 1-/16" (0) from formula. Single Door plus 2 Fixed Panels (XL, L) DW = CW + 1-/16" (0) Single Door plus Fixed Panel Closing against Jamb (XL, L) DW = CW + 1-/16" (0) TL (if incl. endcaps, 2 /2" [2]) TL = DW 2 + FPW2 1-/16" (0) TL (incl. endcaps 2 /2" [2]) FPW2 FPW1 FPW = TL - CW 1-/16" (0) 1-/16" (0) 1-/16" (0) CW DW = CW + 2-/8" (60) CW DW = CW + 1-/16" (0) 140 July 19, 2018 Glass Systems and Solutions Price List #28

151 MUTO Door Panel Sizing Sliding Systems MUTO Door Panel Sizing DISCLAIMER When sizing MUTO door panels, maximum weight capacity is key. When maximizing door panel width, height, or thickness, one or more of the other dimensions (width, height, or thickness) will require reductions to remain at or below the maximum allowable weight capacity of the specific MUTO sliding unit, within industry codes, standards, or specifications, and within door manufacturer recommendations. Maximum door panel width will vary depending on type of MUTO, weight, capacity, and options. All formulas apply to both glass and wood panel applications. Always refer to Glass Association of North America (GANA) when sizing tempered glass doors. Glass Mount Door Width Formulas Single Door Glass Mount (XL, L) DW = CW + 2-/8" (60) CW TL = 2 DW + 2-5/8" (67) Double Door Ceiling Mount Width Formula FPW FPW2 1-/16" (0) FPW2 TL (if incl. endcaps, 2 /2" [2]) TL = 4 DW + 1/2" (12) CW 1/4" (6) DW = CW /16" (27) DW = CW /16" (27) Double Door Glass Mount (XL, L) DW = CW /16" (27) Double Doors with Fixed Panels (XL, L) DW = CW /16" (27) TL = 4 DW + 1/2" (12) CW 1-/16" (0) FPW1 KEY DW = Door Panel Width CW = Clear Opening Width TL = Track Length FPW = Fixed Panel Width FPW1 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles 1-/16" (0) 1-/16" (0) 1-/16" (0) 1/4" (6) 1-/16" (0) Panic DW = CW + 2-/8" (60) Glass Systems and Solutions Price List #28 DW = CW /16" (27) DW = CW /16" (27) July 19,

152 Sliding Systems MUTO Ceiling (CE-R) Recessed Mount Applications MUTO Ceiling (CE-R) Recessed Mount Applications Premium XL 150/80 DORMOTION (DM), XL 150, XL 120 SC Sliding Panels Concealed or Recessed into Ceiling, Header, Drywall, or Drop Ceiling Two most common applications 5" (127) -/4" (95) -9/16" (94) 5/8" (16) Option 1 Recessed both sides, Drywall vertically mounted. 4-15/16" (125) 4-/4" (121) -15/16" (100) -9/16" (90) Option 2 Recessed both sides. (May be drop ceiling profile or reinforced drywall; drop ceiling shown.) 2-11/16" (68) 1/8" () 1/4" (6) 1-1/4" (2) 4-1/4" (108) 4-/16" (106) -9/16" (90) 2-15/16" (75) 2-11/16" (68) 2-11/16" (68) 1/16" (2) 1-1/4" (2) Other applications 4-7/8" (124) 4-/16" (106) -15/16" (100) -9/16" (90) 4-1/4" (108) 4-/16" (106) -9/16" (90) 1-1/4" (2) 2-11/16" (68) 4-9/16" (116) 1/16" (2) 1/16" (2) 1-1/4" (2) 1-1/4" (2) 1/16" (2) Option Option 4 Option 5 Recessed both sides, drop ceiling profile by drywall. Recessed one side only. Drop ceiling profile by drywall above. Recessed both sides, Drop ceiling profile by drywall. (Drop ceiling profile one side by flush vertical drywall other side.) (Drop ceiling profile one side by vertical drywall above.) (Drop ceiling profile one side by reinforced drywall other side.) 4-1/4" (108) 4-/16" (106) -9/16" (90) Option 6 4-1/4" (108) 4-/16" (106) -9/16" (90) Option 7 Recessed one side only. Drop ceiling profile by drywall. Recessed one side only. Drop ceiling profile by drywall. 2-11/16" (68) (Drop ceiling profile cover side by reinforced drywall above sidelite profile.) 2-11/16" (68) (Drop ceiling profile one side by reinforced drywall above cover.) 1-1/4" (2) 1/16" (2) 1/16" (2) 1-1/4" (2) 142 July 19, 2018 Glass Systems and Solutions Price List #28

153 MUTO Premium XL 150 DORMOTION (DM) Sliding Systems MUTO Premium XL 150 DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 DRS Rails, Channels & Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 5 Single Sliding Panel (1P) with DM with One Fixed Panel (1FP) Complete Set Ceiling CE-S 1 Panel (1P) 1 Fixed Panel (1FP) MTO 2,060 2,266 2,678 Patch Fittings & Designer Pivots Single Sliding Panel (1P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ceiling CE-S 2,245 2,470 2, Ft. 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Two Sliding Panels (2P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ceiling CE-S,296,626 4, Ft. 2 Panel (2P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Surface Mount Single Door (1P) Kit shown Glass Systems and Solutions Price List #28 Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Single Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 150 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket/ Endcap) Sidelite Extrusion Mounting hardware Double Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit XL 150 DM 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket/ Endcap) Sidelite Extrusion Mounting hardware 1 Two (2) each for two panels (2P) Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 40-/16" (1020) Max track length: 154" (912) One Door Panel Min clear opening width: 7-1/16" (960) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 78-/16" (1986) Max clear opening width: 111-7/8" (2842) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. July 19, Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic

154 Sliding Systems MUTO Premium XL 150 DORMOTION (DM) MUTO Premium XL 150 DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Recessed Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-R) Recessed Mount * 5 * * Single Sliding Panel (1P) with DM with One Fixed Panel (1FP) Complete MTO Set Ceiling CE-R 1 Panel (1P) 1 Fixed Panel (1FP) 2,266 2,49 2,946 Single Sliding Panel (1P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ceiling CE-R 2,470 2,717, Ft. 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 157" (4 m) Two Sliding Panels (2P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ceiling CE-R,626,989 4, Ft. 2 Panel (2P) 2 Fixed Panel (2FP) Required ADD for units exceeding 157" (4 m) Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite & View Profile, E-Caps, Fasteners) Ceiling Recessed Mount Single Door (1P) Kit shown See Ceiling Recessed (CE-R) Applications on page 16 for more application examples. Single Sidelite Ceiling Recessed Mount (CE-R) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 150 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket/ Endcap) Sidelite Extrusion Mounting hardware Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits Double Sidelite Ceiling Recessed Mount (CE-R) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit XL 150 DM 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket/ Endcap) Sidelite Extrusion Mounting hardware Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits 1 Two (2) each for two panels (2P) Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 40-/16" (1020) Max track length: 154" (912) One Door Panel Min clear opening width: 7-1/16" (960) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 78-/16" (1986) Max clear opening width: 111-7/8" (2842) * See previous page for lead times. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface. Marks are typically hidden once installed. Note: Recessed wrench and foam insert sold separately. 144 July 19, 2018 Glass Systems and Solutions Price List #28

155 MUTO Premium XL 150 DORMOTION (DM) Sliding Systems MUTO Premium XL 150 DORMOTION (DM) One Sliding Panel Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Single Sliding Panel (1P) with DM Complete Wall (W) Mount Glass (G) Mount STK MTO MTO DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Set Wall (W) 1 Panel (1P) STK Track Length: 11-/8" (2880) Set Wall (W) 1 Panel (1P) Set Glass (G) 1 Panel (1P) 1, ,706 1, ,218 1,962 2,158 2,550 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 Wall Mount Glass Mount Single Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 150 DM Set Endcaps Cover Brush Floor Guide Single Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 150 DM Set Endcaps Cover Brush Floor Guide Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount 1 Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 40-/16" (1020) Min clear opening width: 7-1/16" (960) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) 61 NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO Complete set prices shown are priced for up to 154" (912)length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

156 Sliding Systems MUTO Premium XL 150 DORMOTION (DM) MUTO Premium XL 150 DORMOTION (DM) One Sliding Panel Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Single Sliding Panel (1P) with DM Complete Ceiling (CE-S) Surface Mount STK MTO Set Ceiling (CE-S) 1 Panel (1P) STK Track Length: 11-/8" (2880) Set Ceiling (CE-S) 1 Panel (1P) 1, ,788 1,706 1, ,218 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" (6 m) length / Ceiling Surface Mount 1 Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. Custom Fabricated items ship in up to 5 business days. 5 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 150 DM Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 40-/16" (1020) Min clear opening width: 7-1/16" (960) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. 146 July 19, 2018 Glass Systems and Solutions Price List #28

157 MUTO Premium XL 150 DORMOTION (DM) Sliding Systems MUTO Premium XL 150 DORMOTION (DM) Two Sliding Panels Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) with DM Complete DRS Rails, Channels & Wall (W) Mount MTO Set Wall (W) 2 Panel (2P),241, ,21 Patch Fittings & Designer Pivots Glass (G) Mount MTO Set Glass (G) 2 Panel (2P),727 4,100 4,845 Offset Hung Patch Fittings Ref. # U/M Accessory Option List $ Headers & Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 Wall Mount Glass Mount Double Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 150 DM Set Endcaps Cover Brush Floor Guides Double Panel Glass (G) Mount Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 150 DM Set Endcaps Cover Brush Floor Guides Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: 2 0 lb (150 kg) Max door panel width: 57" (1448) Min door panel width: 40-/16" (1020) Max door panel height: 118" (000) Min clear opening width: 78-/16" (1986) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) 61 NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

158 Sliding Systems MUTO Premium XL 150 DORMOTION (DM) MUTO Premium XL 150 DORMOTION (DM) Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Two Sliding Panels (2P) with DM Complete Ceiling (CE-S) Surface Mount 5 MTO Set Ceiling (CE-S) 2 Panel (2P),241,565 4,21 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 9'6" (6 m) length / Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 150 DM Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: 2 0 lb (150 kg) Min door panel width: 40-/16" (1020) Max door panel width: 57" (1448) Max door panel height: 118" (000) Min clear opening width: 78-/16" (1986) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 148 July 19, 2018 Glass Systems and Solutions Price List #28

159 MUTO Premium XL 150 Sliding Systems MUTO Premium XL 150 One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 5 Single Sliding Panel (1P) with One Fixed Panel (1FP) Complete MTO Set Ceiling (CE-S) 1 Panel (1P) 1 Fixed Panel (1FP) 1,585 1,744 2,061 DRS Rails, Channels & Patch Fittings & Designer Pivots Single Sliding Panel (1P) with Two Fixed Panels (2FP) Complete MTO Two Sliding Panels (2P) with Two Fixed Panels (2FP) Complete MTO Set Ceiling (CE-S) 1,728 1,901 2, Ft. 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Set Ceiling (CE-S) 2,56 2,790, Ft. 2 Panel (2P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Ref. # U/M Accessory Option List $ Set Premium XL 150 Synchro Kit Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Surface Mount Single Door (1P) Kit shown Standard or Non-Standard Fabricated; lead time up to days. 5 Technical Details Custom Fabricated items ship in up to 5 business days. Glass thickness: Special Fabricated/Finish or Special Order; lead time up to 5 wks. 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 26" (660) Max track length: 154" (912) Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting 1 Two (2) each for two panels (2P) One Door Panel Min clear opening width: 2-5/8" (600) Max clear opening width: 54-/8" (181) Two Door Panels Min clear opening width: 49-1/16" (1266) Max clear opening width: 111-7/8" (2842) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

160 Sliding Systems MUTO Premium XL 150 MUTO Premium XL 150 One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Recessed Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-R) Recessed Mount 5 Single Sliding Panel (1P) with One Fixed Panel (1FP) Complete MTO Set Ceiling (CE-R) 1 Panel (1P) 1 Fixed Panel (1FP) 1,744 1,918 2,267 Single Sliding Panel (1P) with Two Fixed Panels (2FP) Complete Set Ceiling (CE-R) 1,901 2,091 2, Ft. 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 157" (4 m) Two Sliding Panels (2P) with Two Fixed Panels (2FP) Complete Set Ceiling (CE-R) 2,790,069,627 2 Panel (2P) 2 Fixed Panel (2FP) 26.5 Ft. Required ADD for units exceeding 157" (4 m) MTO MTO Ref. # U/M Accessory Option List $ Set Premium XL 150 Synchro Kit Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 wks. Single Sidelite Ceiling Double Sidelite Ceiling Technical Details NOTES Recessed Mount (CE-R) Recessed Mount (CE-R) Glass thickness: Maximum door panel sizes Complete Set Complete Set 5/16" 1/2" (8 1) cannot all be combined in Track Profile (Ceiling) Track Profile (Ceiling) Track Mounting Track Mounting Max door panel weight: one application. See 0 lb (150 kg) disclaimer note on pages Ceiling Max door panel height: 1 & 15. Recessed Cover Profile and Clips Cover Profile and Clips 118" (000) For door sizes required to Mount See Ceiling Set Roller Carriers Set Roller Carriers Recessed (CE-R) 1 Max door panel width: exceed published maximum, Applications on Set Endcaps Set Endcaps page 16 for 57" (1448) contact dormakaba Cover Brush Cover Brush more application Min door panel width: Technical Service at examples. Floor Guide Floor Guide 1 26" (660) Sidelite Profile and Sidelite Profile and Gasket Sidelite Filler Profile Gasket Sidelite Filler Profile Max track length: 154" (912) Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will Set Sidelite Endcaps Set Sidelite Endcaps One Door Panel be at the center of clear U-Channel (incl Gasket U-Channel (incl Gasket & Min clear opening width: Single Door (1P) Kit shown opening. & Endcap) Endcap) 2-5/8" (600) MUTO MTO complete set Sidelite Extrusion Sidelite Extrusion Max clear opening width: prices shown are priced for Mounting Mounting 54-/8" (181) up to 154" (912) length. Recessed Cover Clip Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits Recessed Start/Stop plate Recessed Hex Bits Two Door Panels Min clear opening width: 49-1/16" (1266) Max clear opening width: Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface. Marks typically hidden once 1 Two (2) each for two Note: Recessed wrench panels (2P) 111-7/8" (2842) installed. and foam insert sold 150 July 19, 2018 separately. Glass Systems and Solutions Price List #28

161 MUTO Premium XL 150 Sliding Systems MUTO Premium XL 150 One Sliding Panel Wall Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) Complete Wall (W) Mount STK MTO Set Wall (W) 1 Panel (1P) STK Track Length: 11-/8" (2880) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Set Wall (W) 1 Panel (1P) 1, ,208 1,29 5 1,570 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Wall Mount Single Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 26" (660) Min clear opening width: 2-5/8" (600) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. Glass Systems and Solutions Price List #28 July 19,

162 Sliding Systems MUTO Premium XL 150 MUTO Premium XL 150 One Sliding Panel Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) Complete Ceiling (CE-S) Surface Mount STK MTO STK Track Length: 11-/8" (2880) Set Ceiling (CE-S) 1 Panel (1P) Set Ceiling (CE-S) 1 Panel (1P) 1, ,208 1,29 5 1,570 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" (6 m) length / Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 0 lb (150 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 26" (660) Min clear opening width: 2-5/8" (600) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 152 July 19, 2018 Glass Systems and Solutions Price List #28

163 MUTO Premium XL 150 Sliding Systems MUTO Premium XL 150 Two Sliding Panels Wall Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) Complete Wall (W) Mount MTO Set Wall (W) 2 Panel (2P) 2,185 2, ,841 DRS Rails, Channels & Patch Fittings & Designer Pivots Ref. # U/M Accessory Option List $ Set Premium XL 150 Synchro Kit Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) 112 Set (Includes floor guide) Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 Wall Mount Double Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers Set Endcaps Cover Brush Floor Guides Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: 2 0 lb (150 kg) Min door panel width: 26" (660) Max door panel width: 57" (1448) Max door panel height: 118" (000) Min clear opening width: 47-1/2" (1207) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) 61 NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. Glass Systems and Solutions Price List #28 July 19,

164 Sliding Systems MUTO Premium XL 150 MUTO Premium XL 150 Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Two Sliding Panels (2P) Complete 5 Ceiling (CE-S) Surface Mount MTO Set Ceiling (CE-S) 2 Panel (2P) 2,185 2,404 2,841 Ref. # U/M Accessory Option List $ Set Premium XL 150 Synchro Kit Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" 6 m) length / Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips 2 Set Roller Carriers Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: 2 0 lb (150 kg) Min door panel width: 26" (660) Max door panel width: 57" (1448) Max door panel height: 118" (000) Min clear opening width: 49-1/16" (1266) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 154 July 19, 2018 Glass Systems and Solutions Price List #28

165 MUTO Premium XL 120 Self-Closing DM Sliding Systems MUTO Premium XL 120 Self-Closing (SC) DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 DRS Rails, Channels & Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 5 Single Sliding Panel (1P) with Self-Closing (SC) with One Fixed Panel (1FP) Complete Set Ceiling (CE-S) RH 2,785,064, Set Ceiling (CE-S) LH 2,785,064,621 1 Panel (1P) 1 Fixed Panel (1FP) MTO Single Sliding Panel (1P) with Self-Closing (SC) with Two Fixed Panels (2FP) Complete MTO Set Ceiling (CE-S) RH,06,40, Set Ceiling (CE-S) LH,06,40, Ft. 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Two Sliding Panels (2P) with Self-Closing (SC) with Two Fixed Panels (2FP) Complete MTO Set Ceiling (CE-S) 4,858 5,44 6, Ft. 2 Panel (2P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) Set Premium XL 120 SC DMSC Acc Set (Includes DORMOTION cushion and 1 DM start/stop) 20 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Surface Mount Single Door (1P) Kit shown Glass Systems and Solutions Price List #28 Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 wks. Single Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 120 SC Unit XL 120 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Double Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit XL SC Unit XL DM Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting 1 Two (2) each for two panels (2P) Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 264 lb (120 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: -1/2" (850) Max track length: 154" (912) NOTES One Door Panel Min clear opening width: 1-1/8" (791) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 64-1/16" (1646) Max clear opening width: 111-7/8" (2842) Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. Self-closing units only have DORMOTION feature in the closing cycle. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. July 19, Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic

166 Sliding Systems MUTO Premium XL 120 Self-Closing DM) MUTO Premium XL 120 Self-Closing (SC) DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Recessed Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-R) Recessed Mount 5 Single Sliding Panel (1P) with Self-Closing (SC) with One Fixed Panel (1FP) Complete MTO Set Ceiling (CE-R) RH,064,70, Set Ceiling (CE-R) LH 1 Panel (1P) 1 Fixed Panel (1FP),064,70,98 Single Sliding Panel (1P) with Self-Closing (SC) with Two Fixed Panels (2FP) Complete MTO Set Ceiling (CE-R) RH,40,674 4, Set Ft. Ceiling (CE-R) LH 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 157" (4 m) Two Sliding Panels (2P) with Self-Closing (SC) with Two Fixed Panels (2FP) Complete Set Ceiling (CE-R) 2 Panel (2P) 2 Fixed Panel (2FP) 26.6 Ft. Required ADD for units exceeding 157" (4 m) MTO,40,674 4, ,44 5,878 6, Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) Set Premium XL 120 SC DMSC Acc Set (Includes DORMOTION cushion and 1 DM start/stop) 20 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Recessed Mount See Ceiling Recessed (CE-R) Applications on page 16 for more application examples. Single Door (1P) Kit shown Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Single Sidelite Ceiling Recessed Mount (CE-R) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 120 SC Unit XL 120 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits Note: Recessed wrench and foam insert sold separately. Double Sidelite Ceiling Recessed Mount (CE-R) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit XL SC Unit XL DM Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits 1 Two (2) each for two panels (2P) Special Fabricated/Finish or Special Order; lead time up to 5 wks. Technical Details NOTES Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 264 lb (120 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: -1/2" (850) Max track length: 154" (912) One Door Panel Min clear opening width: 1-1/8" (791) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 64-1/16" (1646) Max clear opening width: 111-7/8" (2842) Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. Self-closing units only have DORMOTION feature in the closing cycle. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface. Marks are typically hidden once installed. 156 July 19, 2018 Glass Systems and Solutions Price List #28

167 MUTO Premium XL 120 Self-Closing DM Sliding Systems MUTO Premium XL 120 Self-Closing (SC) DORMOTION (DM) One Sliding Panel Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Panel (1P) with Self-Closing (SC) Complete DRS Rails, Channels & Wall (W) Mount STK Set Wall (W) RH 2,50 1, Set Wall (W) LH 2,50 1,055 Patch Fittings & Designer Pivots Glass (G) Mount MTO MTO Set Wall (W) RH 2,468 2,714 5, Set Wall (W) LH 2,468 2,714 5, Set Glass (G) RH 2,88,121, Set Glass (G) LH 2,88,121,698 Offset Hung Patch Fittings Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) Set Premium XL 120 SC DMSC Acc Set (Includes DORMOTION cushion and 1 DM start/stop) 20 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Wall Mount Glass Mount Single Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 120 SC Unit XL 120 DM Set Endcaps Cover Brush Floor Guide Single Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 120 SC Unit XL 120 DM Set Endcaps Cover Brush Floor Guide Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount 1 Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 264 lb (120 kg) Max door panel height: 118" (000) Min door panel width: -1/2" (850) Max door panel width: 57" (1448) Min clear opening width: 1-1/8" (791) Max clear opening width: 54-5/8" (188) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. Self-closing units only have DORMOTION feature in the closing cycle. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

168 Sliding Systems MUTO Premium XL 120 Self-Closing DM MUTO Premium XL 120 Self-Closing (SC) DORMOTION (DM) One Sliding Panel Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Panel (1P) with Self-Closing (SC) Complete Ceiling (CE-S) Surface Mount STK MTO Set Ceiling (CE-S) RH 2,50 1, Set Ceiling (CE-S) LH 2,50 1, Set Ceiling (CE-S) RH 2,468 2,715 5, Set Ceiling (CE-S) LH 2,468 2,715 5,208 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) Set Premium XL 120 SC DMSC Acc Set (Includes DORMOTION cushion and 1 DM start/stop) 20 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" (6 m) length / Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 120 SC Unit XL 120 DM Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 264 lb (120 kg) Max door panel height: 118" (000) Min door panel width: -1/2" (850) Max door panel width: 57" (1448) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. Self-closing units only have DORMOTION feature in the closing cycle. For door sizes required to exceed published maximum, contact dormakaba Technical Min clear opening width: Service at /8" (791) MUTO MTO complete set prices Max clear opening width: shown are priced for up to 54-5/8" (188) 154" (912) length. Max track length: Stock 157" (4 m) extrusion 154" (912) lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 158 July 19, 2018 Glass Systems and Solutions Price List #28

169 MUTO Premium XL 120 Self-Closing DM Sliding Systems MUTO Premium XL 120 Self-Closing (SC) DORMOTION (DM) Two Sliding Panels Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) with Self-Closing (SC) Complete Wall (W) Mount MTO Set Wall (W) 4,688 5, ,094 DRS Rails, Channels & Patch Fittings & Designer Pivots Glass (G) Mount MTO Offset Hung Patch Fittings Headers & Set Glass (G) 5,91 5,90 7,009 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) Set Premium XL 120 SC DMSC Acc Set (Includes DORMOTION cushion and 1 DM start/stop) 20 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), miter joining two MUTO systems is two (2) cuts, list $ x 2 Wall Mount Glass Mount Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Double Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 120 SC 2 Unit XL 120 DM Set Endcaps Cover Brush Floor Guides Double Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 120 SC 2 Unit XL 120 DM Set Endcaps Cover Brush Floor Guides Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (120 kg) Max door panel height: 118" (000) Min door panel width: -1/2" (850) Max door panel width ea: 57" (1448) Min clear opening width: 64-1/16" (1646) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note, page & 5. Self-closing units have DORMOTION feature only in the closing cycle. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

170 Sliding Systems MUTO Premium XL 120 Self-Closing DM MUTO Premium XL 120 Self-Closing (SC) DORMOTION (DM) Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Two Sliding Panels (2P) with Self-Closing (SC) Complete 5 Ceiling (CE-S) Surface Mount MTO Set Ceiling (CE-S) 4,688 5,157 6,094 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) Set Premium XL 120 SC DMSC Acc Set (Includes DORMOTION cushion and 1 DM start/stop) 20 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" (6 m) length / Ceiling Surface Mount Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 120 SC 2 Unit XL 120 DM Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (120 kg) Max door panel height: 118" (000) Min door panel width: -1/2" (850) Max door panel width ea: 57" (1448) Min clear opening width: 64-1/16" (1646) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. Self-closing units have DORMOTION feature only in the closing cycle. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 160 July 19, 2018 Glass Systems and Solutions Price List #28

171 MUTO Premium XL 120 Self-Closing DM Sliding Systems MUTO Premium XL 80 DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 5 Single Sliding Panel (1P) with DM with One Fixed Panel (1FP) Complete Set Ceiling (CE-S) 1 Panel (1P) 1 Fixed Panel (1FP) MTO 1,99 2,1 2,521 DRS Rails, Channels & Patch Fittings & Designer Pivots Single Sliding Panel (1P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ft. Ceiling (CE-S) 1 Panel (1P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) Two Sliding Panels (2P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ft Ceiling (CE-S) 2 Panel (2P) 2 Fixed Panel (2FP) Required ADD for units exceeding 154" (912) 2,114 2,25 2, ,102,412 4, Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 9'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Surface Mount Single Door (1P) Kit shown Glass Systems and Solutions Price List #28 Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Single Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 80 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Double Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit XL 80 DM 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting 1 Two (2) each for two panels (2P) Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 1-7/8" (810) Max track length: 154" (912) One Door Panel Min clear opening width: 29-1/2" (750) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 61-5/8" (1566) Max clear opening width: 111-7/8" (2842) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. July 19, Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic

172 Sliding Systems MUTO Premium XL 80 DORMOTION (DM) MUTO Premium XL 80 DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Recessed Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-R) Recessed Mount * 5 * * Single Sliding Panel (1P) with DM with One Fixed Panel (1FP) Complete MTO Set Ceiling (CE-R) 1 Panel (1P) 1 Fixed Panel (1FP) 2,1 2,46 2,77 Single Sliding Panel (1P) with DM with Two Fixed Panels (2FP) Complete Set Ceiling (CE-R) 1 Panel (1P) 2 Fixed Panel (2FP) 2,25 2,558, Ft. Required ADD for units exceeding 157" (4 m) Two Sliding Panels (2P) with DM with Two Fixed Panels (2FP) Complete Set Ceiling (CE-R),412,75 4,46 2 Panel (2P) 2 Fixed Panel (2FP) 26.5 Ft Required ADD for units exceeding 157" (4 m) MTO MTO Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); / Ft. up to 19'6" (6 m) length Ft. Fixed Panel Kit (Includes XL Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Recessed Mount Single Door (1P) Kit shown See Ceiling Recessed (CE-R) Applications on page 16 for more application examples. Single Sidelite Ceiling Recessed Mount (CE-R) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 80 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits Double Sidelite Ceiling Recessed Mount (CE-R) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit XL 80 DM 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Recessed Cover Clip Recessed Start/Stop plate Recessed Hex Bits 1 Two (2) each for two panels (2P) Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 1-7/8" (810) Max track length: 154" (912) One Door Panel Min clear opening width: 29-1/2" (750) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 61-5/8" (1566) Max clear opening width: 111-7/8" (2842) * See next page for lead time descriptions. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface. Marks typically hidden once installed. Note: Recessed wrench and foam insert sold separately. 162 July 19, 2018 Glass Systems and Solutions Price List #28

173 MUTO Premium XL 80 DORMOTION (DM) Sliding Systems MUTO Premium XL 80 DORMOTION (DM) One Sliding Panel Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) with DM Complete Wall (W) Mount Glass (G) Mount STK MTO Set Wall (W) 1 Panel (1P) STK Track Length: 11-/8" (2880) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Set Wall (W) 1 Panel (1P) 1, ,654 1,579 1, MTO Set Glass (G) 1 Panel (1P) 1,816 1,997 2,61 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 Wall Mount Glass Mount 1 Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Single Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 80 DM Set Endcaps Cover Brush Floor Guide Single Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 80 DM Set Endcaps Cover Brush Floor Guide Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount Technical Details NOTES Glass thickness: Maximum door panel sizes 5/16" 1/2" (8 1) cannot all be combined in one Max door panel weight: application. See disclaimer note 176 lb (80 kg) on pages 1 & 15. Max door panel height: For door sizes required to exceed 118" (000) published maximum, contact Max door panel width: dormakaba Technical Service at 57" (1448) Min door panel width: MUTO MTO complete set prices 1-7/8" (810) shown are priced for up to Min clear opening width: 154" (912) length. 29-1/2" (750) Stock 157" (4 m) extrusion Max clear opening width: lengths include clamp marks on 54-5/8" (188) mounting surface within approximately 1/2" 1-/4" Make to Order (MTO) (1 44) from each end, Max track length: which may need to be cut in the 154" (912) field. 61 MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

174 Sliding Systems MUTO Premium XL 80 DORMOTION (DM) MUTO Premium XL 80 DORMOTION (DM) One Sliding Panel Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) with DM Complete Ceiling (CE-S) Surface Mount STK MTO Set Ceiling (CE-S) STK Track Length: 1 Panel (1P) 11-/8" (2880) Set Ceiling (CE-S) 1 Panel (1P) 1, ,579 1,77 5 2,05 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" (6 m) length / Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit XL 80 DM Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 1-7/8" (810) Min clear opening width: 29-1/2" (750) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 164 July 19, 2018 Glass Systems and Solutions Price List #28

175 MUTO Premium XL 80 DORMOTION (DM) Sliding Systems MUTO Premium XL 80 DORMOTION (DM) Two Sliding Panels Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) with DM Complete DRS Rails, Channels & Wall (W) Mount MTO Set Wall (W) 2 Panel (2P),000,00 5,900 Patch Fittings & Designer Pivots Glass (G) Mount MTO Set Glass (G) 2 Panel (2P),450,795 4,485 Offset Hung Patch Fittings Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Wall Mount Glass Mount Double Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 80 DM Set Endcaps Cover Brush Floor Guides Double Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 80 DM Set Endcaps Cover Brush Floor Guides Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 1-7/8" (810) Min clear opening width: 61-5/8" (1566) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

176 Sliding Systems MUTO Premium XL 80 DORMOTION (DM) MUTO Premium XL 80 DORMOTION (DM) Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Two Sliding Panels (2P) with DM Complete 5 Ceiling (CE-S) Surface Mount MTO Set Ceiling (CE-S) 2 Panel (2P),000,00,900 Ref. # U/M Accessory Option List $ Set Premium XL 150/120/80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 112 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Ft. XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners); up to 19'6" (6 m) length / Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit XL 80 DM Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 1-7/8" (810) Min clear opening width: 61-5/8" (1566) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end, which may need to be cut in the field. 166 July 19, 2018 Glass Systems and Solutions Price List #28

177 MUTO Premium XL 80 Telescopic (TEL) Sliding Systems MUTO Premium XL 80 Telescopic (TEL) Two or Four Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 DRS Rails, Channels & Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 8W 8W MTO Two Sliding Panels (2P) with One Fixed Panel (1FP) Left Hand Opening Complete Set Set 5 (GLS), Set 29 (WD) 4,004 4,279 5,042 Ceiling (CE-S) (WD) 2 Panels (2P) 1 Fixed Panel (1FP) Left Hand Opening Patch Fittings & Designer Pivots MTO Two Sliding Panels (2P) with One Fixed Panel (1FP) Right Hand Opening Complete (WD) Set Set 8 (GLS), Set 2 (WD) Ceiling (CE-S) 2 Panels (2P) 1 Fixed Panel (1FP) Right Hand Opening 4,004 4,279 5,042 Offset Hung Patch Fittings Headers & MTO Four Sliding Panels (4P) with Two Fixed Panels (2FP) Complete (WD) Set Set 9 (GLS), Set (WD) Ceiling (CE-S) 4 Panels (4P) 2 Fixed Panel (2FP) 8,008 8,559 10,085 Ref. # U/M Accessory Option * See next page for lead times List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Two Panel Sidelite Ceiling Surface Mount (CE-S) Complete Set Track & Mounting Front Cover and Clips 2 Sets Roller Carriers TEL Cable Set TEL DM Kit (Optional) Set Endcaps Cover Brush Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) Quick Door Carrier Sidelite Center Cover Quick Door Carrier Cover Bi-Parting Four Panel Sidelite Ceiling Surface Mount (CE-S) Complete Set 2 Tracks & Mounting 2 Front Covers and Clips 2 Sets Roller Carriers 2 TEL Cable Set 2 TEL DM Kit (Optional) Set Endcaps Cover Brush 2 Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) 2 Quick Door Carriers 2 Sidelite Center Cover 2 Quick Door Carrier CoverTrack Profile (Ceiling) Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight each: 2 PNL = lb (80 kg) 4 PNL = 4 x 176 lb (80 kg) Max door panel height: 118" (000) Min door panel width each: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening widths with and without handles, see technical brochure panel sizing chart. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Bi-parting XL 80 TEL pairs, (4-panel) will require 2 tracks and covers with a joint at center of clear opening. MUTO MTO complete set prices shown are priced for up to 118" ( m) length. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

178 Sliding Systems MUTO Premium XL 80 Telescopic (TEL) MUTO Premium XL 80 Telescopic (TEL) Two Sliding Panels Wall Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) on Wall (W) Mount 8W 8W 8W MTO Two Sliding Panels (2P) Left Hand Opening Complete Set Set 1 (GLS), Set 25 (WD) Wall (W) (WD) 2 Panels (2P) Left Hand Opening,484,697 4,04 MTO Two Sliding Panels (2P) Right Hand Opening Complete Set Set 2 (GLS), Set 26 (WD) (WD) Wall (W) 2 Panels (2P) Right Hand Opening,484,697 4,04 Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Two Panel Wall Mount (W) Complete Set Track & Mounting Front Cover and Clips 2 Sets Roller Carriers TEL Cable Set TEL DM Kit (Optional) Set Endcaps Cover Brush Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) Quick Door Carrier Sidelite Center Cover Quick Door Carrier Cover Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight each.: 2 PNL = lb (80 kg) Max door panel height: 118" (000) Min door panel width each.: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening widths with & without handles; see technical brochure panel sizing chart. NOTES Maximum door panel size cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum,- contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 118" ( m) length. 168 July 19, 2018 Glass Systems and Solutions Price List #28

179 MUTO Premium XL 80 Telescopic (TEL) Sliding Systems MUTO Premium XL 80 Telescopic (TEL) Two Sliding Panels Wall Mount, 90 Jamb Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 DRS Rails, Channels & Two Sliding Panels (2P) on Wall (W) Mount 8W 8W 8W MTO Two Sliding Panels (2P) Left Hand Opening into 90 Complete Set Set 1.1 (GLS), Set 25.1 (WD) Wall (W) (WD) 2 Panels (2P) Left Hand Opening 90 Jamb.,484,697 4,04 Patch Fittings & Designer Pivots Offset Hung Patch Fittings Two Sliding Panels (2P) Right Hand Opening into 90 Complete MTO (WD) Set Set 2.1 (GLS), Set 26.1 (WD) Wall (W) 2 Panels (2P) Right Hand Opening 90 Jamb,484,697 4,04 Headers & Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Two Panel Wall Mount (W) Complete Set Track & Mounting Front Cover and Clips 2 Sets Roller Carriers TEL Cable Set TEL DM Kit (Optional) Set Endcaps Cover Brush Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) Quick Door Carrier Sidelite Center Cover Quick Door Carrier Cover Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight each: 2 PNL = lb (80 kg) Max door panel height: 118" (000) Min door panel width each.: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear openingwidths with and without handles; see technical brochure panel sizing chart NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 118" (m ) length. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

180 Sliding Systems Premium XL 80 Telescopic (TEL) MUTO Premium XL 80 Telescopic (TEL) Two Sliding Panels with Two Fixed Panels (Sidelites) Glass Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Fixed Panels (FP) Mount on Glass (G) Mount 8W 8W 8W MTO Two Sliding Panels (2P) with Two Fixed Panels (2FP) Left Hand Opening Complete Set Set 10 (GLS), Set 4 (WD) 4,042 4,04 5,026 Glass (G) (WD) 2 Panels (2P) 2 Fixed Panels (2FP) Left Hand Opening MTO Two Sliding Panels (2P) with Two Fixed Panels (2FP) Right Hand Opening Complete (WD) Set Set 11 (GLS), Set 5 (WD) Glass (G) 2 Panels (2P) 2 Fixed Panels (2FP) Right Hand Opening 4,042 4,04 5,026 Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Two Panel Glass (G) Mount Complete Set Track & Mounting Front Cover and Clips 2 Sets Roller Carriers TEL Cable Set TEL DM Kit (Optional) Set Endcaps Cover Brush Moving & Set Floor Guide Sidelite Profile, Gasket and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) Quick Door Carrier Sidelite Center Cover Quick Door Carrier Cover Glass Mount Profile,, and gaskets Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight Ea.: 2 PNL = lb (80 kg) Max door panel height: 118" (000) Min door panel width Ea.: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening widths with and without handles; see technical brochure pane sizing chart. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 118" ( m) length. 170 July 19, 2018 Glass Systems and Solutions Price List #28

181 Premium XL 80 Telescopic (TEL) Sliding Systems MUTO Premium XL 80 Telescopic (TEL) Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) on Ceiling (CE-S) Surface Mount 8W 8W 8W MTO Two Sliding Panels (2P) Left Hand Opening Complete Set Set 4 (GLS), Set 28 (WD) Ceiling (CE-S) (WD) 2 Panels (2P) Left Hand Opening,484,697 4,04 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings MTO Two Sliding Panels (2P) Right Hand Opening Complete Set Set 7 (GLS), Set 1 (WD) (WD) Ceiling (CE-S) 2 Panels (2P) Right Hand Opening,484,697 4,04 Headers & Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Two Panel Ceiling Surface Mount (CE-S) Complete Set Track & Mounting Front Cover and Clips 2 Sets Roller Carriers TEL Cable Set TEL DM Kit (Optional) Set Endcaps Cover Brush Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) Quick Door Carrier Sidelite Center Cover Quick Door Carrier Cover Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight Ea.: 2 PNL = lb (80 kg) Max door panel height: 118" (000) Min door panel width Ea.: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening widths with and without handles, see technical brochure panel sizing chart. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 118" ( m) length. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

182 Sliding Systems MUTO Premium XL 80 Telescopic (TEL) MUTO Premium XL 80 Telescopic (TEL) Two Sliding Panels Ceiling, Surface Mount, 90 Jamb Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) on Ceiling (CE-S) Surface Mount 8W 8W 8W MTO Two Sliding Panels (2P) Left Hand Opening into 90 Jamb Complete Set Set 4.1 (GLS), Set 28.1 (WD),484,697 4,04 Ceiling (CE-S) 2 Panels (2P) (WD) Left Hand Opening 90 Jamb MTO Two Sliding Panels (2P) Right Hand Opening into 90 Jamb Complete (WD) Set Set 7.1 (GLS), Set 1.1 (WD) Ceiling (CE-S) 2 Panels (2P) Right Hand Opening 90 Jamb,484,697 4,04 Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Two Panel Ceiling Surface Mount (CE-S) Complete Set Track & Mounting Front Cover and Clips 2 Sets Roller Carriers TEL Cable Set TEL DM Kit (Optional) Set Endcaps Cover Brush Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) Quick Door Carrier Sidelite Center Cover Quick Door Carrier Cover Technical Details Glass thickness 5/16" 1/2" (8 1.5) Max door panel weight Ea.: 2 PNL = lb (80 kg) Max door panel height: 118" (000) Min door panel width each: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening widths with and without handles; see technical brochure panel sizing chart. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO complete set prices shown are priced for up to 118" ( m) length. 172 July 19, 2018 Glass Systems and Solutions Price List #28

183 MUTO Premium XL 80 Telescopic (TEL) Sliding Systems MUTO Premium XL 80 Telescopic (TEL) Four Sliding Panels Wall Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Four Sliding Panels (4P) 8W 8W 8W Four Sliding Panels (4P) Wall (W) Mount Complete Set Set (GLS), Set 27 (WD) Wall (W) 86.7 (WD) 4 Panels (4P) MTO 6,967 7,94 8,607 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Four Sliding Panels (4P) with Two Fixed Panels (4FP) Glass (G) Mount Complete MTO Set Set 12 (GLS), Set 6 (WD) (WD) Glass (G) 4 Panels (4P) 2 Fixed Panels (2FP). 8,08 8,607 10,05 Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Bi-Parting Four Panel Wall Mount (W) Complete Set Track & Mounting and Sidelite Filler Profile Front Cover and Clips Set Sidelite Endcaps 2 Sets Roller Carriers U-Channel (incl Gasket TEL Cable Set and Endcap) TEL DM Kit (Optional) Quick Door Carrier Set Endcaps Sidelite Center Cover Cover Brush Quick Door Carrier Moving & Set Floor Cover Guide Sidelite Profile, Gasket, Bi-Parting Four Panel Glass (G) Mount Complete Set 2 Tracks & Mounting Sidelite Filler Profile Set Sidelite Endcaps 2 Front Covers and Clips U-Channel (incl Gasket 2 Sets Roller Carriers and Endcap) 2 TEL Cable Set 2 Quick Door Carriers 2 TEL DM Kit (Optional) 2 Sidelite Center Cover Set Endcaps 2 Quick Door Carrier Cover Brush Cover 2 Moving & Set Floor Glass Mount Profile, Guide, and Gaskets Sidelite Profile, Gasket and Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight each: 4 PNL = 4 x 176 lb (80 kg) Max door panel height: 118" (000) Min door panel width each: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening widths with and without handles; see technical brochure panel sizing chart. NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Bi-parting XL 80 TEL pairs, (4-panel) will require 2 tracks and covers with a joint at center of clear opening. MUTO MTO complete set prices shown are priced for up to 118" ( m) length. Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

184 Sliding Systems MUTO Premium XL 80 Telescopic (TEL) MUTO Premium XL 80 Telescopic (TEL) Four Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Four Sliding Panels (4P) 8W 8W 8W Four Sliding Panels (4P) Ceiling (CE-S) Surface Mount Complete Set Set 6 (GLS), Set 0 (WD) Ceiling (CE-S) (WD) 4 Panels (4P) MTO 6,967 7,94 8,607 Ref. # U/M Accessory Option List $ WD Set Wood panel kit All appropriate hardware for wood door panels in lieu of glass door panels. NC Ea. DM Optional DORMOTION unit 468 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x W Special Order custom product glabally sourced from dormakaba factory; lead time up to 8 weeks. Bi-Parting Four Panel Ceiling Surface Mount (CE-S) Complete Set 2 Tracks & Mounting 2 Front Covers and Clips 2 Sets Roller Carriers 2 TEL Cable Set 2 TEL DM Kit (Optional) Set Endcaps Cover Brush 2 Moving & Set Floor Guide Sidelite Profile, Gasket, and Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket and Endcap) 2 Quick Door Carriers 2 Sidelite Center Cover 2 Quick Door Carrier CoverTrack Profile (Ceiling) Technical Details Glass thickness: 5/16" 1/2" (8 1.5) Max door panel weight each: 4 PNL = 4 x 176 lb (80 kg) Max door panel height: 118" (000) Min door panel width each: 1-/2" (790) w DM 2-5/8" (600) wo DM Max door panel width glass or wood each: Fast door: 47-1/4" (1200) w/o handle 49-1/16" (1265) w handle Slow door: 44-11/16" (115) Max track length: 118" (000) For Min./Max. clear opening, widths with and without handles; see technical brochure panel sizing chart NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Bi-parting XL 80 TEL pairs, (4-panel) will require 2 tracks and covers with a joint at center of clear opening. MUTO MTO complete set prices shown are priced for up to 118" ( m) length. 174 July 19, 2018 Glass Systems and Solutions Price List #28

185 MUTO Comfort L 80 DORMOTION (DM) Sliding Systems MUTO Comfort L 80 DORMOTION (DM) One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 DRS Rails, Channels & Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 5 Single Sliding Panel (1P) with DM with One Fixed Panel (1FP) Complete Set Ceiling (CE-S) 1 Panel (1P) 1 Fixed Panel (1FP) MTO 1,41 1,475 1,74 Patch Fittings & Designer Pivots Single Sliding Panel (1P) with DM with Two Fixed Panels (2FP) Complete MTO Set Ceiling (CE-S) 1 Panel (1P) 2 Fixed Panel (2FP) 1,462 1,608 1, Ft. Required ADD for units exceeding 154" (912) Two Sliding Panels (2P) with DM with Two Fixed Panels (2FP) Complete 26.9 Set Ceiling (CE-S) 2,146 2,61 2,790 2 Panel (2P) 2 Fixed Panel (2FP) MTO Required ADD for units 26.1 Ft. exceeding 154" (912) Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 12 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x / Ft. Fixed Panel Kit (Includes L Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Surface Mount Single Door (1P) Kit shown Single Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit L 80 DM Set Endcaps Cover Brush Floor Guide Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket/ Endcap) Sidelite Extrusion Mounting Double Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Unit L 80 DM 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profile Set Sidelite Endcaps U-Channel (incl Gasket/ Endcap) Sidelite Extrusion Mounting 1 Two (2) each for two panels (2P) Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 9" (990) Max track length: 154" (912) One Door Panel Min clear opening width: 6-5/8" (90) Max clear opening width: 61-5/8" (1566) Two Door Panels Min clear opening width: 75-1/16" (1926) Max clear opening width: 111-7/8" (2842) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO Complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

186 Sliding Systems MUTO Comfort L 80 DORMOTION (DM) MUTO Comfort L 80 DORMOTION (DM) One Sliding Panel Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) with DM Complete Wall (W) Mount STK MTO Set Wall (W) 1 Panel (1P) STK Track Length: 11-/8" (2880) Set Wall (W) 1 Panel (1P) , ,041 1, ,5 Glass (G) Mount MTO Set Glass (G) 1 Panel (1P) 1,197 1,17 1,556 Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Wall Mount 1 Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Single Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Unit L 80 DM Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO Complete set prices Glass Mount Single Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips Set Roller Carriers Unit L 80 DM Set Endcaps Cover Brush 9" (990) Min clear opening width: 6-5/8" (90) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. Floor Guide Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount 176 July 19, 2018 Glass Systems and Solutions Price List #28

187 MUTO Comfort L 80 DORMOTION (DM) Sliding Systems MUTO Comfort L 80 DORMOTION (DM) One Sliding Panel Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) with DM Complete Ceiling (CE-S) Surface Mount STK MTO STK Track Set Ceiling (CE-S) 1 Panel (1P) Length: 11-/8" (2880) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Set Ceiling (CE-S) 1 Panel (1P) , ,041 1, ,5 Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Unit L 80 DM Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 9" (990) Min clear opening width: 6-5/8" (90) Max clear opening width: 54-5/8" (188) Make to Order (MTO) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO Complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. Glass Systems and Solutions Price List #28 July 19,

188 Sliding Systems MUTO Comfort L 80 DORMOTION (DM) MUTO Comfort L 80 DORMOTION (DM) Two Sliding Panels Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) with DM Complete Wall (W) Mount MTO Set Wall (W) 2 Panel (2P) 1,978 2, ,571 Glass (G) Mount MTO 86.1 Set Glass (G) 2 Panel (2P) 2,275 2,50 2,957 Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Wall Mount Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Double Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit L 80 DM Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel Min door panel width: sizes over 8" (965) require two Glass Mount Double Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting 9" (990) Min clear opening width: 75-1/16" (1926) Max clear opening width: tracks. Joint will be at the center of clear opening. MUTO MTO Complete set prices shown are priced for up Cover Profile and Clips 111-7/8" (2842) to 154" (912) length. 2 Set Roller Carriers Max track length: Stock 157" (4 m) extrusion 2 Unit L 80 DM 154" (912) lengths include clamp marks on Set Endcaps mounting surface within Cover Brush approximately 1/2" 1-/4" Floor Guides (1 44) from each end which Glass Mount Profile may need to be cut in the field. Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount 178 July 19, 2018 Glass Systems and Solutions Price List #28

189 MUTO Comfort L 80 DORMOTION (DM) Sliding Systems MUTO Comfort L 80 DORMOTION (DM) Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 DRS Rails, Channels & Two Sliding Panels (2P) with DM Complete 5 Ceiling (CE-S) Surface Mount MTO 86.0 Set Ceiling (CE-S) 2 Panel (2P) 1,978 2,176 2,571 Patch Fittings & Designer Pivots Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Offset Hung Patch Fittings Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips 2 Set Roller Carriers 2 Unit L 80 DM Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 9" (990) Min clear opening width: 75-1/16" (1926) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 7" require two tracks. Joint will be at the center of clear opening. MUTO MTO Complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. Glass Systems and Solutions Price List #28 July 19,

190 Sliding Systems MUTO Comfort L 80 MUTO Comfort L 80 One or Two Sliding Panels with One or Two Fixed Panels (Sidelites) Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Fixed Panel (FP) Mount on Ceiling (CE-S) Surface Mount 5 Single Sliding Panel (1P) with One Fixed Panel (1FP) Complete MTO Set Ceiling (CE-S) 1 Panel (1P) 1 Fixed Panel (1FP) 1,161 1,277 1,509 Single Sliding Panel (1P) with Two Fixed Panels (2FP) Complete MTO Set Ceiling (CE-S) 1 Panel (1P) 2 Fixed Panel (2FP) 1,265 1,92 1, Ft. Required ADD for units exceeding 154" (912) Two Sliding Panels (2P) with Two Fixed Panels (2FP) Complete Set Ceiling (CE-S) 1,858 2,044 2,415 2 Panel (2P) 2 Fixed Panel (2FP) MTO Required ADD for units 26.1 Ft. exceeding 154" (912) Ref. # U/M Accessory Option List $ Set Comfort L 80 Synchro Acc. Set (Includes Cable, Pulley, Endstops, etc. [Complete]) Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x / Ft. Fixed Panel Kit (Includes L Track/COV/U-Chan/Sidelite Profile, E-Caps, Fasteners) Ceiling Surface Mount Single Door (1P) Kit shown Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Single Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Floor Guide Cover Brush Sidelite Profile and Gasket Sidelite Filler Profile Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting Double Sidelite Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers 1 Set Endcaps Cover Brush Floor Guide 1 Sidelite Profile and Gasket Sidelite Filler Profile Sidelite View Profiel Set Sidelite Endcaps U-Channel (incl Gasket & Endcap) Sidelite Extrusion Mounting 1 Two (2) each for two panels (2P) Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Max door panel width: 57" (1448) Min door panel width: 26" (660) Max track length:154" (912) One Door Panel Min clear opening width: 2-5/8" (600) Max clear opening width: 54-5/8" (188) Two Door Panels Min clear opening width: 49-1/16" (1266) Max clear opening width: 111-7/8" (2842) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO Complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. 180 July 19, 2018 Glass Systems and Solutions Price List #28

191 MUTO Comfort L 80 Sliding Systems MUTO Comfort L 80 One Sliding Panel Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) Complete DRS Rails, Channels & Wall (W) Mount STK Set Wall (W) 1 Panel (1P) STK Track Length: 118-1/8" (000) Patch Fittings & Designer Pivots Glass (G) Mount MTO MTO Set Wall (W) 1 Panel (1P) Set Glass (G) 1 Panel (1P) , ,097 1,296 Offset Hung Patch Fittings Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Wall Mount Glass Mount Single Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Cover Brush Floor Guide Single Panel Glass (G) Mount Complete Set Track Profile (Glass) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Cover Brush Floor Guide Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount 1 Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Min door panel width: 26" (660) Max door panel width: 57" (1448) Min clear opening width: 2-5/8" (600) Max clear opening width: 54-5/8" (188) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965)require two tracks. Joint will be at the center of clear opening. MUTO MTO Complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

192 Sliding Systems MUTO Comfort L 80 MUTO Comfort L 80 One Sliding Panel Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Single Sliding Panel (1P) Complete Ceiling (CE-S) Surface Mount STK MTO 86.0 Set Ceiling (CE-S) STK Track Length: 1 Panel (1P) 118-1/8" (000) Set Ceiling (CE-S) 1 Panel (1P) ,108 Ref. # U/M Accessory Option List $ Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x Non-fabricated item; ships in one business day (24 hours). Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Single Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceilingl) Track Mounting Cover Profile and Clips Set Roller Carriers Set Endcaps Cover Brush Floor Guide Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight: 176 lb (80 kg) Max door panel height: 118" (000) Min door panel width: 26" (660) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MUTO MTO Complete set prices Max door panel width: shown are priced for up to 154" (912) 57" (1448) length. Min clear opening width: Stock 157" (4 m) extrusion lengths 2-5/8" (600) include clamp marks on mounting Max clear opening width: surface within approximately 54-5/8" (188) 1/2" 1-/4" (1 44) from each end Max track length: which may need to be cut in the field. 154" (912) 182 July 19, 2018 Glass Systems and Solutions Price List #28

193 MUTO Comfort L 80 Sliding Systems MUTO Comfort L 80 Two Sliding Panels Wall and Glass Mounts Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Two Sliding Panels (2P) Complete DRS Rails, Channels & Wall (W) Mount MTO 86.2 Set Wall (W) 2 Panel (2P) 1,619 1, ,105 Patch Fittings & Designer Pivots Glass (G) Mount Offset Hung Patch Fittings Headers & MTO Set Glass (G) 2 Panel (2P) 1,894 2,08 2,462 Ref. # U/M Accessory Option List $ Set Comfort L 80 Synchro Acc. Set (Includes Cable, Pulley, Endstops, etc. {Complete}) Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Wall Mount Glass Mount Double Panel Wall Mount (W) Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips 2 Set Roller Carriers Set Endcaps Cover Brush Floor Guides Double Panel Glass (G) Mount Complete Set Track Profile (Glass) Cover Profile and Clips 2 Set Roller Carriers Set Endcaps Cover Brush Floor Guides Glass Mount Profile Set Glass Mount Endcaps Glass Mount Gasket Glass Mount Brackets Glass Mount Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (80 kg) Max door panel height: 118" (000) Min door panel width: 26" (660) Max door panel width: 57" (1448) Min clear opening width: 49-1/16" (1266) Max clear opening width: 111-7/8" (2842) Max track length: 154" (912) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at Pairs of sliders with door panel sizes over 8" (965) require two tracks. Joint will be at the center of clear opening. MUTO MTO Complete set prices shown are priced for up to 154" (912) length. Stock 157" (4 m) extrusion lengths include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

194 Sliding Systems MUTO Comfort L 80 MUTO Comfort L 80 Two Sliding Panels Ceiling, Surface Mount Standard Finishes $ Special Finishes $ Anodized/Powder Paint Model Ref. # U/M Description /99 Two Sliding Panels (2P) Complete 5 Ceiling (CE-S) Surface Mount MTO Set Ceiling (CE-S) 2 Panel (2P) 1,619 1,781 2,105 Ref. # U/M Accessory Option List $ Set Comfort L 80 Synchro Acc. Set (Includes Cable, Pulley, Endstops, etc. {Complete}) Set Comfort L 80 Wood Door Adaptor Kit (2 m length) (Includes floor guide) 102 MITER Ft. Miter charge list add per cut. (One cut equals one track, cover, and if supplied sidelite), 45 miter joining two MUTO systems is two (2) cuts, list $ x 2 61 Standard or Non-Standard Fabricated; lead time up to days. 5 Custom Fabricated items ship in up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Ceiling Surface Mount Double Panel Ceiling Surface Mount (CE-S) Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips 2 Set Roller Carriers Set Endcaps Cover Brush Floor Guides Technical Details Glass thickness: 5/16" 1/2" (8 1) Max door panel weight/ double door: lb (80 kg) Max door panel height: 118" (000) Min door panel width: NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note on pages 1 & 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at " (660) Pairs of sliders with door panel Max door panel width: sizes over 8" (965) require two 57" (1448) tracks. Joint will be at the center Min clear opening width: of clear opening. 49-1/16" (1266) MUTO MTO Complete set prices Max clear opening width: shown are priced for up to 111-7/8" (2842) 154" (912) length. Max track length: Stock 157" (4 m) extrusion lengths 154" (912) include clamp marks on mounting surface within approximately 1/2" 1-/4" (1 44) from each end which may need to be cut in the field. 184 July 19, 2018 Glass Systems and Solutions Price List #28

195 MUTO Comfort M 50 Sliding Systems MUTO Comfort M 50 One Sliding Panel Wall and Ceiling Mounts Standard Finishes $ DRS Rails, Channels & Model Ref. # U/M Description Single Sliding Panel (1P) Complete 1 Wall (W) Mount STK Set Wall (W) Track Length: 11-/8" (2880) Patch Fittings & Designer Pivots Ceiling (CE-S) Surface Mount STK Set Ceiling (CE-S) Track Length: 11-/8" (2880) Offset Hung Patch Fittings Headers & Ref. # U/M Accessory Option List $ Set MUTO Comfort M 50 DM Kit (Set includes cushion and DM start/stops) Set Comfort M 50 Wood Door Adaptor Kit (1. m length) 84 Wall Mount Single Panel Wall (W) Mount Complete Set Track Profile (Wall) Track Mounting Cover Profile and Clips Set Roller Carriers Set End Caps Cover Brush Floor Guide Ceiling Surface Mount Single Panel Ceiling Surface (CE-S) Mount Complete Set Track Profile (Ceiling) Track Mounting Cover Profile and Clips Set Roller Carriers Set End Caps Cover Brush Floor Guide 1 Non-fabricated item; ships in one business day (24 hours). Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Technical Details Glass thickness: 5/16" /8" (8 10) Max door panel weight 110 lb (50 kg) Max door panel width: 42" (1067) Max door panel height: 84" (214) Max clear opening width: 9-5/8" (1006) Max track length: 11-/8" (2880) With DM (DORMOTION) Min door panel width: 5-5/8" (905) Min clear opening width: -1/4" (845) Without DM (DORMOTION) Min door panel width: 26" (660) Min clear opening width: 2-5/8" (600) NOTES Maximum door panel sizes cannot all be combined in one application. See disclaimer note, pages 1 and 15. For door sizes required to exceed published maximum, contact dormakaba Technical Service at MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

196 Sliding Systems MUTO & Components MUTO & Components Standard 1,2 Finish $ Special Finishes $ Powder Coat Model Ref. # U/M Description Roller Accessory Kit, Complete Set Premium XL 150/120/80 roller carrier kit (Use with or without DM, Synchro or Self-Closing) Consists of 2 roller carriers, 2 endstops, 1 floor guide and 2 hooks Set Comfort L 80 roller carrier kit (Use with or without DM or Synchro) Consists of 2 roller carriers, 2 endstops, 1 floor Set Comfort M 50 roller carrier kit (Use with or without DM) Consists of 2 roller carriers, 2 endstops, 1 floor guide and 2 hooks Gasket Sets List $ Set Two (2) Premium XL 150/120/80 DM/Synchro/ Self-Closing Gasket Sets Set Two (2) Comfort L 80 DM/Synchro Gasket Sets Set Two (2) Comfort M 50 DM Gasket Sets 29 Floor Guide Ea. MUTO Glass Door Floor Guide, adjustable 5/16" 17/2" (8-1.5) (Used for all finishes for MUTO) NOTES 1 in the Roller Accessory Kits, the finish designation only applies to the Floor Guide. 2 Floor Guide for 11 finish will be supplied as July 19, 2018 Glass Systems and Solutions Price List #28

197 MUTO & Components Sliding Systems MUTO & Components Special Finishes $ Standard Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Track and Cover Extrusions Ln. Premium XL 150/80 Wall Mount Track (Used with or without DM) Fixed ~1' (4 m) length Ft. Order by length in feet Ln. Premium XL 120 Self-Closing Wall Mount Track Fixed ~1' (4 m) length 946 1,041 1, Ln. Ft. Order by length in feet Comfort L 80 Wall Mount Track (Used with or without DM) Fixed ~1' (4 m) length Ft. Order by length in feet Ln Ln Ln Ln. Premium XL 150/80 Ceiling Mount Track (Used with or without DM) for DM Ceiling Install Fixed ~1' (4 m) length Ft. Order by length in feet Premium XL 120 Self-Closing Ceiling Mount Track Fixed ~1' (4 m) length 946 1,041 1,277 Ft. Order by length in feet Comfort L 80 Ceiling Mount Track (Used with or without DM) Fixed ~1' (4 m) length Ft. Order by length in feet Premium XL 150/80 Fixed Panel (Sidelite) Track (DM and non-dm) Fixed ~1' (4 m) length Ft. Order by length in feet Ln. Premium XL 120 SC Fixed Panel (Sidelite) Track Fixed ~1' (4 m) length Ft. Order by length in feet Ln. Comfort L 80 Fixed Panel (Sidelite) Track Fixed ~1' (4 m) length Ft. Order by length in feet Ln. Premium XL 150/80 Track Front Cover Profile Kit (Used with and without DM, includes cover and 1 ea. cover clips) Fixed ~1' (4 m) length Ft. Order by length in feet, 1 cover clip per ft DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & MANET Sliding Pulls & Closers & Systems Handles Panic Glass Systems and Solutions Price List #28 July 19,

198 Sliding Systems MUTO & Components MUTO & Components Special Finishes $ Standard Finishes $ Anodized/Powder Coat Model Ref. # U/M Description / Ln. Premium XL 120 Self-Closing Track Front Cover Profile Kit (Includes cover and 1 ea. cover clips) Fixed ~1' (4 m) length Ft. Order by length in feet, 1 cover clip per ft Ln. Premium XL120 Self-Closing Track Front Cover Profile Kit (CE-R) (Includes cover and 1 ea. cover clips) Fixed ~1' (4 m) length Ft. Order by length in feet, 1 cover clip per ft Ln. Comfort L 80 Track Front Cover Profile Kit (Used with and without DM, includes cover and 1 ea. cover clips) Fixed ~1' (4 m) length Ft. Order by length in feet, 1 cover clip per ft Model Ref. # U/M Description List $ Wood Adapter Sets Pk #12 fasteners and anchors (5 ea.) for mounting MUTO track profile Ln. 2m Premium XL 150/120/80 Wood Door Adaptor Kit, includes floor guide(s) Length 4 m (4 guides) 78-/4" (2 m) (2 guides) Ft. Ft. (1 guide per ft.) Ln. 2m Comfort L 80 Wood Door Adaptor Kit, includes floor guide(s) Length 4 m (4 guides) 78-/4" (2 m) (2 guides) Ft. Ft. (1 guide per ft.) Set Comfort M 50 Wood Door Adaptor Kit, includes floor guide Ea. Floor Guide Cover Clips Ea. Cover clip for Premium XL systems Ea. Cover clip for Comfort L and M systems July 19, 2018 Glass Systems and Solutions Price List #28

199 MUTO & Components Sliding Systems MUTO & Components Standard Finishes $ Special Finishes $ Powder Coat Model Ref. # U/M Description 150/11 99 DRS Rails, Channels & Endcaps Set Premium XL 150/80 Endcap Set (With or without DM, LH and RH for Wall/ Ceiling Mount) Set Premium XL Self-Closing Endcap Set (LH and RH for Wall/Ceiling Mount) Patch Fittings & Designer Pivots Set Comfort L 80 Endcap Set (With or without DM, LH and RH for Wall/Ceiling Mount) Set Comfort M 50 Endcap Set (With or without DM, LH and RH for Wall/Ceiling Mount) Set Premium XL 150/120 SC/80 Endcap Set (With or without DM, LH and RH for Glass Mount) Offset Hung Patch Fittings Headers & Set Comfort L 80 Endcap Set (With or without DM, LH and RH for Glass Mount) 25 4 Model Ref. # U/M Description List $ DORMOTION Accessory and Start/Stop Kits Set Premium XL 150 DM Acc. Set (Includes DORMOTION Cushion and 2 DM start/stops) Set RH Set LH Premium XL 120 DM Self-Closing Acc. Set (Includes DORMOTION Cushion and 1 DM start/stop) Set Premium XL 120 SC DMSC Acc (Includes DORMOTION Cushion and 1 DM start/stop) Set Premium XL 80 DM Acc. Set (Includes DORMOTION Cushion and 2 DM start/stops) Set Premium XL 80 TEL DM Acc. Set (Includes DORMOTION Cushion and 2 DM start/stops) MANET Sliding Pulls & Closers & Systems Handles Set Comfort L 80 DM Acc. Set (Includes DORMOTION Cushion and 2 DM start/stops) 252 Panic Glass Systems and Solutions Price List #28 July 19,

200 Sliding Systems MUTO & Components MUTO & Components Model Ref. # U/M Description List $ Set Comfort M 50 DM Acc. Set (Includes DORMOTION Cushion and 2 DM start/stops) Set Premium XL 150/80 DM Start/Stop Set (Includes 2 DM start/stops) Set Comfort L 80 DM Start/Stop Set (Includes 2 DM start/stops) Ea. Premium XL 120 DM Start/Stop Set (Includes 2 DM start/stops) Set Comfort M 50 DM Start/Stop Set (Includes 2 DM start/stops) 62 Synchro Set Premium XL 150 Synchro Acc. Set (Includes Cable, Pulley, Endstops, etc. {Complete}) [Not compatible with DM] Set Comfort L 80 Synchro Acc. Set (Includes Cable, Pulley, Endstops, etc. {Complete}) [Not compatible with DM] Ea. Premium XL 80 or 150 Synchro Cable [Not compatible with DM] Long lead-time (LH) (RH) Ea. Premium XL 80 TEL Service Cable [Not compatible with Synchro Cable] Extended lead-time 129 Self-Closing Set RH Set LH Premium Flexi-Cable Service Unit, Self-Closing (Complete Housing w/pulleys and ) (Specify RH / LH) Ea. Premium Flexi-Cable for Service, Self-Closing (Cable Only) Long lead-time July 19, 2018 Glass Systems and Solutions Price List #28

201 MUTO & Components Sliding Systems MUTO & Components Model Ref. # U/M Description List $ Brush Profiles Ft. Premium/Comfort Brush Profile XL 150/120/80 or L 80 for 5/16" /8" (8 10) glass 2 DRS Rails, Channels & Ft. Premium/Comfort Brush Profile XL 150/120/80 or L 80 for 1/2" 17/2" (12 1.5) glass Ft. Comfort M 50 DM Brush Profile, 2 profiles /8" (8) and 1/2" (12) glass 2 Patch Fittings & Designer Pivots Standard Finishes $ Special Finishes $ Anodized/ Powder Coat Model Ref. # U/M Description /99 Brush Seal Carrier Ln. MUTO Premium/Comfort carrier profile, for vertical brush seal, stock length is 177-1/8" (4.5 m) (Aluminum color) Model Ref. # U/M Description List $ Offset Hung Patch Fittings Headers & Brush Seals for XL 80 TEL (Telescopic) Endstops Ft. MUTO Premium/Comfort vertical bulb/tubular seal for leading edge of glass to jamb/glass to glass, specify length by feet (2x required for pairs) (Clear-frost) Ft. MUTO Premium/Comfort vertical brush seal for gaps 1/2" 5/8" (1-16), specify length by feet (Grey) Ft. MUTO Premium/Comfort vertical brush sealing for gaps >5/8" /4" (>16-19), specify length by feet (Grey) Ft. MUTO Premium/Comfort vertical brush sealing for gaps >/4" 29/2" (>19-2), specify length by feet (Grey) Ft. MUTO Premium/Comfort vertical brush sealing for gaps >29/2"-1-1/16" (>2-27), specify length by feet (Grey) Set Premium XL 150/80 Endstop Set (2 ea.) Set Comfort L 80 Endstop Set (2 ea.) MANET Sliding Pulls & Closers & Systems Handles Set Comfort M 50 Endstop Set (2 ea.) 64 Panic Glass Systems and Solutions Price List #28 July 19,

202 Sliding Systems MUTO & Components MUTO & Components Model Ref. # U/M Description List $ Bumper Sets Set Premium XL 150/80 Bumper Set (2 ea.) (Used in Endstop; Bumpers only) Set Comfort L 80 Bumper Set (2 ea.) (Used in Endstop; Bumpers only) Set Comfort M 50 Bumper Set (2 ea.) (Used in Endstop; Bumpers only) 1 Holder Hook Sets Set Premium XL 150 Carrier Holder Hook Set (2 ea.) (Connects to Carrier, Latches on Endstop) Set Comfort L 80 Carrier Holder Hook Set (2 ea.) (Connects to Carrier, Latches on Endstop) 21 Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Sidelite (Fixed Panel) Extrusions and Ln. Premium XL 150/80/Synchro Sidelite Profile (Connects to glass at top) 2-2/2" (69) height complete w/gaskets (/8" 1/2" [10 1] thick glass; see below for gasket for other thicknesses) Fixed ~1' (4 m) length (includes fasteners) Ft. Order by length in feet (includes fasteners) Ln. Comfort L 80/Synchro Sidelite Profile, (Connects to glass at top) 2-9/2" (58) height complete w/gaskets (/8" 1/2" [10 1] thick glass; see below for gasket for other thicknesses) Fixed ~1' (4 m) length (includes fasteners) Ft. Order by length in feet (includes fasteners) Fixed Panel Sidelite Kits (includes Track/COV/U-Channel/Sidelite Profile, E-Caps, Fasteners) Ln. XL 150 DM/80 DM/XL 150 Premium Sidelite Kit Max 157" (4 m) ,888 2, Ft. Order by length in feet Ln. XL150 DM/80 DM/XL 150 Premium Sidelite Kit (CE-R). Max 157" (4 m) 1,712 1,888 2, Ft. Order by length in feet July 19, 2018 Glass Systems and Solutions Price List #28

203 MUTO & Components Sliding Systems MUTO & Components Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description / Ln. XL 120 SC Premium Sidelite Kit Max 157" (4 m) 1,797 1,982 2,58 DRS Rails, Channels & Ft. Order by length in feet Ln. XL120 SC Premium Sidelite Kit (CE-R) Max 157" (4 m) 1,797 1,982 2,58 Patch Fittings & Designer Pivots 26.6 Ft. Order by length in feet Ln. L80 DM/L 80 Comfort Sidelite Kit Max 157" (4 m) 1,50 1,688 1,998 Offset Hung Patch Fittings 26.1 Ft. Order by length in feet Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Sidelite Profile Set Premium XL 150/120 SC/80 Sidelite Endcap Set (With or without DM, LH and RH for Sidelite Mount) Acc. Set. 2-9/2" (58) height Set Comfort L 80 Sidelite Endcap Set (With or without DM, LH and RH for Sidelite Mount) Acc. Set. 2-9/2" (58) height Ln (99 finish only) (99 finish only) Premium/Comfort View Profile for use w/ Sidelite 2-9/2" (58) and 2-2/2" (69) height; includes 1 ea. clips Fixed ~1' (4 m) length Ft. Order by length in feet, 1 clip per ft Ln. Comfort Filler Profile for use w/sidelite Profile 2-9/2" (58) and 2-2/2" (69) height Fixed ~1' (4 m) length Ft. Order by length in feet Ea. View profile clips, use with view profile extrusion for Sidelite application Ln. List $ Premium XL 150/120/80 Drop Ceiling Connector Profile (Incl. extrusion and fasteners) Fixed ~19'6" (6 m) length Ft. Order by length in feet Headers & MANET Sliding Pulls & Closers & Systems Handles Dri-Fit Channel for /8" and 1/2" Glass with mounting holes pre-drilled Ft. 1" 1" Dri-Fit Anodized (Gasket Required) Panic Glass Systems and Solutions Price List #28 July 19,

204 Sliding Systems MUTO & Components MUTO & Components Standard Finishes $ Special Finishes $ Anodized/Powder Coat Model Ref. # U/M Description /99 Dri-Fit Channel and Sidelite Gasket List $ Ea. Gasket for 1" x 1" Dri-fit U-Channel, 1/2" (12) thick glass (Clear) Ea. Gasket for 1" x 1" Dri-fit U-Channel, /8" (10) thick glass (Clear) Ft. Service part, sidelite profile gasket 5/16"-/8" (8-10) thick glass (Black) Ft. Service part, sidelite profile gasket /8"-1/2" (10-1) thick glass (Black) Ft. Service part, sidelite profile gasket 1/2"- 17/2" (1-1.5) thick glass (Black) Model Ref. # U/M Description List $ Recessed Mount Rl. Foam, Adhesive Back /16" Vinyl (Supplied optional for CE-R units, 50Ft. Roll) (Grey) Ea. XL Premium Recessed Cover Clip Ea. XL Premium Recessed Start/Stop Service Plate Ea. Wrench, 6MM Ratcheting / Combo (Use w/pn# and hex bit in CE-R units) Ea. M4 Long Hex Bit, Recessed Mount Service Item Ea. M4 Short Hex Bit, Recessed Mount Service Item 15 E-Lock Ea. Premium XL 150/80 DM electromagnetic lock kit, 12~24 VDC (12V/0.28A, 24V/0.14A), conceals in track & jamb Ea. Premium XL 150 electromagnetic lock kit, 12~24 VDC (12V/0.28A, 24V/0.14A), conceals in track & jamb Ea. Premium XL 120 SC electromagnetic lock kit, 12~24 VDC (12V/0.28A, 24V/0.14A), conceals in track & jamb July 19, 2018 Glass Systems and Solutions Price List #28

205 MUTO & Components Sliding Systems MUTO & Components Model Ref. # U/M Description List $ Status Indicator Fastener Packs Tempered Laminated Glass (TLG) Set Premium Status Indicator Acc. Set (Package Complete, includes Sensor, Cables, etc.) Pk. M6x14 for mounting sidelite profile or drop ceiling profile Pk. M6x5 for mounting drop ceiling profile Ea. M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 0 59 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings LGAA LGA Ea. M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 4 roller carriers 78 Headers & Carrier Locating Tool MUTO Tool Kit MTIPS Set M Scotch-Weld EPX plus II mixing square nozzle, 5. (4 tips per set) Set Premium XL 150/120/80 TLG Gasket Set (Can be used w/roller sets ) Glue & tips sold separately Set Comfort L 80 TLG Gasket Set (Can be used w/roller set 86.49) Glue & tips sold separately Ea. Premium/Comfort Carrier Locating Tool Accessory tool for quickly and easily locating roller carrier on top of moving panel Ea. MUTO Tool Kit Accessory tool kit, incl. typical tools used for installation and adjustment of MUTO Comfort systems Panic MANET Sliding Pulls & Closers & Systems Handles Glass Systems and Solutions Price List #28 July 19,