PRICE LIST 25. DRS Rails, Accessories. Channels & Patch Fittings & Designer Pivots. Hung Patch Fittings. Offset. Headers & Accessories.

Transcription

1 Panic MANET Pulls & Handles Locksets Closers & Headers & Offset Hung Patch Fittings Patch Fittings & Designer Pivots Sliding Systems DRS Rails, Channels & PRICE LIST 25 Glass Systems & Solutions January 26, 2015

2 INTRODUCTION TABLE OF CONTENTS TABLE OF CONTENTS Introduction Contact Information iii Finish Codes iv Product Shipping Schedule v Warranty Policy vi Terms of Sale vii Application Guide viii DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Closers & Locksets Pulls & Handles Sliding Systems MANET 165 Panic 187 ii DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

3 INTRODUCTION CONTACT INFORMATION CONTACT INFORMATION DORMA USA, INC. Dorma Drive, Drawer AC Reamstown, PA Office Hours Monday Friday 8:00 AM to 6:00 PM EST Phone requesting quotes FAX JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA iii

4 INTRODUCTION FINISH CODES FINISH CODES Anodized Aluminum Parts DORMA GMBH Finish # Ref. DORMA USA Finish # BHMA Equivalent Reference DORMA Code Mill ML Clear CL Similar to Stainless Steel 107/11 107/ SSS Aluminum Color EV-1 Dark Bronze DB Black BK Polished Chrome ARC Special Anodized SA Brass Polished Brass with Lacquer PBL Polished Brass without Lacquer 50 PB Satin Brass without Lacquer SB Similar to Satin Stainless SSS Steel or Stainless Steel Satin Chrome Plated SC Polished Chrome Plated PC Satin Stainless Steel SS Polished Stainless Steel PS Bronze Satin Bronze without Lacquer SBZ Polished Bronze without Lacquer PBZ Dark Bronze Oxidized, Oil Rubbed B Painted or Powder Coated Aluminum SBZ Satin Bronze PBZ Dark Bronze B Black BK Dark Duranodic Bronze DB Gold Primer PR Special Paint/Powder SF Special Clad (Plated) Finish SPL Special Anodized Plastic Parts Black BK Similar to 101 Clear Similar to Satin Stainless 808 List $ Finish Sample Item # (includes finishes 101, 108, 109, 50, 599, 600, 601, 700, 701) 0 NOTES:. Custom powder or paint finishes ordered as 999 or special cladding ordered as 299 must be approved by DORMA prior to quoting. Not all custom finishes are possible at the published list prices.. DORMA always reserves the right to refuse any custom finish order.. Finish # is DORMA s numerical representation within the part number.. Please contact factory for special finishes.. Note that full length finished extrusions may include clamping marks to be cut off in field prior to installation.. DORMA finishes are representative of industry recognized BHMA or other finishes. Exact match from DORMA to a base metal finish, a competitors product, or from lot to lot is never guaranteed. iv DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

5 INTRODUCTION PRODUCT SHIPPING SCHEDULE PRODUCT SHIPPING SCHEDULE Key Orders received by 2:00 PM EST Mon. Tues. Wed. Thurs. 1 Non-Fabricated items ship in 1 business day: Tues. Wed. Thurs. Fri. Fri. *Mon. Standard Fabricated and Non-Standard Fabricated items ship in up to business days: Thurs. Fri. *Mon. *Tues. *Wed. 5 Custom Fabricated items ship in up to 5 business days: *Mon. *Tues. *Wed. *Thurs. *Fri. Special Fabricated/Finishes and Special Order items: Ship in up to 5 weeks. NOTE: Above fabrication schedule is based on 10 fabrication items per order. For fabrication orders over 10 per order, please contact Customer Service for a custom schedule. *Indicates the following week. 1 5 NON- FABRICATED STANDARD FABRICATED NON-STANDARD FABRICATED CUSTOM FABRICATED. Select Patch Fittings and ; see individual price pages for details.. RTS88 and BTS80 Closers and in limited finishes.. Select Handles; see individual price pages for details. (Excludes custom handles.). Select DRS Rails and ; see individual price pages for details. (Excludes Mitres.). Slect DRS Dri-Fit Sidelite rails; see individual price pages for details. (Excludes Mitres.). Select 4-1/8" or 4-1/2" Headers; see individual price pages for details. (Excludes Mitres.) NOTE: All headers are shipped with closers installed unless supplied from select service or requested otherwise. U-Channels and Dri-Fit Channels, any length. Select Mechanical Channel components; see individual price pages for details.. Select Manual Slider Systems; see individual price pages for details. (Excludes Syncro & DORMOTION.). Select 4-1/8" or 4-1/2" Headers fabricated to special lengths (standard 2-/4" pivot point, standard finishes). NOTE: All headers are shipped with closers installed unless supplied from select service or requested otherwise.. Miters (DRS Rails, Headers, Dri-Fit Sidelites and U-Channel) at any length and any angle. EMSL 2765 Shear Locks installed in DRS Rails and/or Headers (standard or non-standard Fab lengths). Special pivot point preparations, other than 2-/4" pivot point, DRS Rails and/or Headers).. Vertical Stile, Floating Header, Offset Pivot preparation and/or installation. SPECIAL FABRICATED/ FINISHES SPECIAL ORDER NOTES:. UPS will ship a maximum of 10 united inches (length + 108" maximum length.. Accelerated shipping is available at customer expense.. Orders requiring competitor (non-dorma) hardware preparation or installation are scheduled on a project basis once all competitor product/templates are received. Allow up to five (5) weeks from that point. HSW/FSW systems require up to five (5) weeks.. Special finishes will be scheduled based on required process capacity. Allow up to five (5) weeks.. Paint/Powder Coat capacity based on back log; last in last out (LILO) at time of purchase order. Allow up to five (5) weeks. No returns/no cancellations accepted on special order items.. Special finishes will be scheduled based on required process capacity. Allow up to five (5) weeks.. Paint/Powder Coat cap acity based on back log; last in last out (LILO) at time of purchase order. Allow up to five (5) weeks. No returns/no cancellations accepted on special order items.. DORMA is committed to using the most efficient method of shipping orders unless otherwise specified.. Orders are not guaranteed to ship same day.. Additional expenses to DORMA as a result of special packaging request from customer will be added to the customer invoice and may extend lead time. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA v

6 INTRODUCTION WARRANTY POLICY Delivery Ship dates are contingent upon conditions at time of acknowledgement and can be subject to delays due to strikes and/or other labor issues, material shortages, equipment failure, fire, flood, or other acts of God, or causes beyond our control. DORMA is not liable under any circumstances for consequential damages arising from such delays. Freight Policy All goods are shipped F.O.B. Leola, PA. Shipments will be prepaid and charges added to the invoice for customers with accounts and COD for orders under $1, net for non- account holders. Freight charges are prepaid and allowed on any one order to one destination (Mainland U.S.A) by carrier of DORMA choice, for orders with net price of $5, minimum. WARRANTY POLICY All DORMA closers that are BMHA certified to ANSI A156.4 Grade 1 Standard for Door Controls-Closers are covered by a 25-year warranty. This includes BTS Series concealed floor closers, except where noted. All fire/life safety products that are BHMA certified to ANSI A Grade 1 Standard for Closer-Holder Release Devices carry a 25-year warranty on the closer mechanism and a 2-year warranty on any electrical or electronic component. The RTS Series overheadconcealed closers carry a 5-year warranty. All other products not mentioned above carry a 2-year warranty. All DORMA products including Universal, TENR, DRS, Headers, RS-120, DRS-120, AGILE 150, MANET, BEYOND, VISUR, and Exit are covered by a 2-year warranty. All goods sold are warranted to be free from defects in material and workmanship, the foregoing comprises seller s sole and entire warranty. All other warranties, written or verbal, expressed or implied, and including but not limited to warranties of merchantability or fitness for intended purpose are expressly excluded. Seller s sole obligation under these warranties, during the period after date of manufacture as listed above, shall be to issue credit, repair or replace any items or part thereof which is proved to be other than as warranted. Seller shall have the sole right to determine whether such parts shall be repaired or replaced or whether credit shall be issued. No allowance shall be made for any labor charges for replacement of parts, adjustments or repairs, or any other work. In no event shall seller be liable for collateral or consequential damages. If goods are claimed to be other than as warranted, seller, upon notice promptly given, will either examine the goods at their site or issue shipping instructions for return to seller (transportation costs prepaid by buyer). These warranties shall not extend to any goods or parts thereof which have been subjected to misuse or neglect, damage by accident, rendered defective by reason of improper installation or by the performance of repairs, modifications or attachment to other products outside of seller s plant. Because DORMA has no control over conditions under which its products are used, DORMA specifically does not warrant the adequacy or sufficiency of any device or recommendations given to buyer. Nor does DORMA warrant that every DORMA product complies with every code, standard or regulation in every community except as specifically stated in a published DORMA catalog or in writing by an officer of the company. Nor is DORMA bound by the terms of buyer s agreements with other parties. For projects located outside the United States or Canada, the limited warranty period for all products is 1 year from the date of manufacture. DORMA regional businesses located outside the United States or Canada may offer different warranty periods. United States or Canada is defined as the several states of the United States, the District of Columbia, the commonwealths, territories and possessions of the United States, and all of the Canadian provinces and territories. vi DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

7 INTRODUCTION TERMS OF SALE TERMS OF SALE Prices All prices shown are in U.S. Dollars and are subject to change without notice. Prices on acknowledged orders are firm for shipment within three months of order date. All other orders subject to price in effect at time of shipment. Terms 1% 10 Days, Net 0. Minimum Order $50.00 net minimum invoice. Orders We reserve the right to decline the whole or part of orders in which price, finishes, quantity of goods, or credit status of the buyer is not satisfactory to us. We reserve the right to discontinue items or change specifications at any time without notice and without incurring any obligations. DORMA cannot be held liable for extended delivery dates that may result in the cancellation of an order. Acknowledgments Acknowledgements are exact copies of the manufacturing order and should be checked upon receipt. If acknowledgement is incorrect, please notify DORMA Customer Service immediately. Order Cancellations & Changes For standard product or standard fabricated product (i.e., products that are not custom and not special order) with a defined 1 to day lead time. Changes or cancellations will be allowed without penalty within hours of order acknowledgement.. Changes or cancellations made more than hours after order acknowledgement may incur a fee for recovery of processing costs.. Charges for changing an order will be based on the status of the order at the time of the change.. Orders cancelled more than hours after order acknowledgement will incur a 50% minimum restock fee. For standard product or standard fabricated product (i.e., products that are not custom and not special order) with a defined 5 days or more lead time. Changes or cancellations will be allowed without penalty within 24 hours of order receipt.. Changes or cancellations made more than 24 hours of order receipt may incur a fee for recovery of processing costs.. Charges for changing an order will be based on the status of the order at the time of the change.. Orders cancelled more than 24 hours after order receipt will incur a 50% minimum restock fee. Cancellations for custom or special order products will not be accepted and will be invoiced the full value of the order. Returned Goods Goods determined defective within the terms of our warranty may be returned for replacement. Goods returned due to any other factors are subject to a 25% restocking fee. For all returns contact the factory for a Return of Goods Authorization number (RGA). All returns must bear the RGA number provided. Unauthorized returns will not be accepted. The complete RGA policy is available upon request. All returns must be shipped to DORMA USA, Inc., Returns Department, 8 Industrial Circle, Lancaster PA, JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA v ii

8 INTRODUCTION APPLICATION GUIDE APPLICATION GUIDE Type P Door Type BP Door Key 1-5/8" or 4" DRS Top Dri-Fit Sidelite Rail (Fixed Panel) 2-5/8" or 4" DRS Top Rail 886 or 854-5/8" or 4" DRS Top Rail 55.0 or /8" or 4" DRS Bottom Dri-Fit Sidelite Rail (Fixed Panel) 5-5/8" or 4" DRS Bottom Rail 8852 with or without Lock 6-5/8" or 4" DRS Bottom Rail 55.1 or 7422 with or without Lock 7 6" or 10" DRS Top Dri-Fit Sidelite Rail (Fixed Panel) 8 6" or 10" DRS Top Rail 886 or " or 10" DRS Top Rail 55.0 or " or 10" DRS Bottom Dri-Fit Sidelite Rail (Fixed Panel) 11 6" or 10" DRS Bottom Rail 8852 with or without Lock 12 6" or 10" DRS Bottom Rail 55.1 or 7422 with or without Lock v i i i DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

9 INTRODUCTION APPLICATION GUIDE APPLICATION GUIDE Type A Door (Special Order) JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA ix

10 x DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

11 DRS RAILS, CHANNELS & ACCESRIES TABLE OF CONTENTS DRS RAILS, CHANNELS & ACCESRIES Select Service 2 DRS Rails Ordering Guides 6 Top Rails 8 Bottom Rails 14 Bottom Rail Locking 25 DRS & Options DRS Rails Covers 26 DRS Rail End Caps 27 Vertical Stiles 29 Weather Brush / Weather Seal 29 DRS Rail Shim 29 Saddles and Thresholds 29 DRS Dri-Fit Sidelite Rails Ordering Guide 0 Sidelite Rails 1 Dri-Fit Options and 2 Dri-Fit Sidelite Rail Profiles & End Caps Glazing and Dri-Fit U-Channels & Sidelite Glazing U-Channel 4 Dri-Fit Channel for End Cap (Snap Fit) 5 Dri-Fit Channel Gasket 5 Dri-Fit Channel for /8", 1/2" and 5/8", /4" Glass 5 DRS & Options DRS Rail Locks 6 Cylinders 6 BTS Offset Arms & Pivots 6 RTS88 Arms and Pivots 7 DRS Options 7 Mechanical Channel and End Cap 8 Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 1

12 DRS RAILS, CHANNELS & ACCESRIES SELECT SERVICE SELECT SERVICE QUICK SHIP DRS Rails, Channels & Select service should be used for small quantities of popular DORMA products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: DORMA receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. DORMA receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. DORMA reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to DORMA. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Product SKUs and prices subject to change without notice.. Some of the available products have quantity per order limits and will be noted accordingly. Key N E "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse Available only in East Coast Warehouse 2 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

13 DRS RAILS, CHANNELS & ACCESRIES SELECT SERVICE DRS RAILS, CHANNELS & ACCESRIES Choose top or bottom rail and rail height from the four options: 1/2" Glass Ref. # Warehouse Product Top/Bottom U/M Height Locking Style Finish List $ 9001 N DRS Rail Top Ea. 2-1/2" No SQ N DRS Rail Top Ea. 2-1/2" No SQ N DRS Rail Top Ea. 2-1/2" No SQ DRS Rail Top Ea. -5/8" No SQ DRS Rail Top Ea. -5/8" No SQ DRS Rail Top Ea. -5/8" No SQ DRS Rail Top Ea. 4" No SQ DRS Rail Top Ea. 4" No SQ N DRS Rail Bottom Ea. 2-1/2" No SQ N DRS Rail Bottom Ea. 2-1/2" No SQ N DRS Rail Bottom Ea. 2-1/2" No SQ N DRS Rail Bottom Ea. 2-1/2" Yes SQ N DRS Rail Bottom Ea. 2-1/2" Yes SQ N DRS Rail Bottom Ea. 2-1/2" Yes SQ DRS Rail Bottom Ea. -5/8" No SQ DRS Rail Bottom Ea. -5/8" No SQ DRS Rail Bottom Ea. -5/8" No SQ N DRS Rail Bottom Ea. -5/8" Yes SQ N DRS Rail Bottom Ea. -5/8" Yes SQ N DRS Rail Bottom Ea. -5/8" Yes SQ DRS Rail Bottom Ea. 4" No SQ DRS Rail Bottom Ea. 4" No SQ N DRS Rail Bottom Ea. 4" Yes SQ N DRS Rail Bottom Ea. 4" Yes SQ DRS Rails, Channels & Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Panic MANET Sliding Systems Offset Hung Patch Fittings Headers & NOTE: 2-1/2" rails and components available after April 1, JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA

14 DRS RAILS, CHANNELS & ACCESRIES SELECT SERVICE DRS Top Rails Consist of: Qty U/M HDW 1 Ea. 886 Arm 1 Ea. Top Rail 1 Set Covers 1 Set End Caps DRS Bottom Rails Consist of: 1 Ea Pivot 1 Ea. Bottom Rail 1 Set Covers 1 Set End Caps 1 (Locking) Ea. Brass Lock DRS Bottom Rails Consist of: 1 Ea Pivot 1 Ea. Btm. Rail 1 Set Covers 1 (Non-Locking) Set End Caps DRS Top Rails for Center Hung Doors Choose top or bottom rail and rail height from the four options: Ref. # Warehouse Product Top/Bottom Locking Height Cover Style Glass Finish List $ N DRS Cover No 2-1/2" COV SQ 1/2" N DRS Cover No 2-1/2" COV SQ 1/2" N DRS Cover No 2-1/2" COV SQ 1/2" N DRS Cover Bottom Yes 2-1/2" COV SQ 1/2" N DRS Cover Bottom Yes 2-1/2" COV SQ 1/2" N DRS Cover Bottom Yes 2-1/2" COV SQ 1/2" DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

15 DRS RAILS, CHANNELS & ACCESRIES SELECT SERVICE Choose top or bottom rail and rail height from the four options: Ref. # Warehouse Product Top/Bottom Locking Height Cover Style Glass Finish List $ DRS Cover -5/8" COV SQ 1/2" DRS Cover -5/8" COV SQ 1/2" DRS Cover -5/8" COV SQ 1/2" DRS Cover 4" COV SQ 1/2" DRS Cover 4" COV SQ 1/2" N DRS End Cap 2-1/2" End Cap SQ N DRS End Cap 2-1/2" End Cap SQ * N DRS End Cap 2-1/2" End Cap SQ DRS End Cap -5/8" End Cap SQ DRS End Cap -5/8" End Cap SQ DRS End Cap -5/8" End Cap SQ DRS End Cap 4" End Cap SQ DRS End Cap 4" End Cap SQ * 109 finish for 2-1/2" rail end caps, 108 not available NOTE: Bold items use 500 finish Eca Ref. # Qty Product Description Finish List $ LCK Lock, 1-7/8", 5/8" throw CYL Mortise cylinder for DRS lock, with split ring CYL Mortise cylinder for DRS lock, with split ring TT Mortise thumb-turn for DRS lock, with split ring TT Mortise thumb-turn for DRS lock, with split ring BLNK Mortise blank (dummy) cylinder for DRS lock, with split ring BLNK Mortise blank (dummy) cylinder for DRS lock, with split ring Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 5

16 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS RAILS Ordering Guides Less Covers Ordered Less Covers or Model Cladding DRS NO Rail Location Top & Bottom TOPBTM Bottom BTM Top TOP continued DRS EC2 TOP 58 STK SQ next 1/2 page End Cap for Rail (1 each) EC1 2-1/2" Top Rail 25 End Cap for Rail (2 each) EC2-5/8" Top Rail 58 No End Cap for Rail NONE 4" Top Rail 4 End Cap 6" Top Rail 6 10" Top Rail 10 Top Rail Bottom Rail 10L 10" Bottom Rail w/ Lock 6L 6" Bottom Rail w/ Lock 4L 4" Bottom Rail w/ Lock 58L -5/8" Bottom Rail w/ Lock 25L 2-1/2" Bottom Rail w/ Lock 10 10" Bottom Rail Top Rail 6 6" Bottom Rail 886 RTS End Load Arm 4 4" Bottom Rail 55.0 Top Rail Insert (15 mm pin) 58-5/8" Bottom Rail /2" Bottom Rail NONE Stock 5-/4" STK Custom Length SPECIFY Rail Length SQ Square Rail TP Tapered Rail 1 Top Rail Profile Top Rail, Side Load, Adjustable Insert (Not Available w/ 2-1/2" Rail) None 8852 Bottom Rail Arm for 8852 Floor Pivot 55.1 Bottom Rail Insert for BTS (Not Available w/ 2-1/2" Rail) 7422 BTM Rail Arm for BTS/7471K NONE None Bottom Rail 6 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

17 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Panic MANET DRS Rails, Channels & Glass Thickness 9/16 11/16 1/2 NONE NONE NONE 101 NONE NO Magnetic Shear Lock DG1000/DG100 Prep None 9/16" Tempered Laminated Glass 2765 Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Sliding Systems PANIC NONE Top Rail Lock Bottom Rail Lock 11/16" Tempered 1/2 Laminated Glass NONE None 1/2" Glass PANIC DG1000/DG100 Prep /8 /8" Glass BRASSLK178 Brass Lock 5/8 5/8" Glass ² BRASSLK1916 Brass Lock Vertical Stiles /4 /4" Glass ² BRASSLK178L Brass Lock None Thumb Turn Thumb Turn Thumb Turn Blank Cylinder Thumb Turn Cylinder Blank None TTXTT TTXBLNK CYLXTT CYLXBLNK NONE Cylinder for Brass Lock Standard Finish 999 CCLAD Vertical Stiles VERTPACK NONE Custom Preps HDWPREP CMP HDWP CMP HDW1 CMP SHEAR NO Clear Anodized (CL) Dark Bronze (DB) Black Anodized (BK) Polished Brass w/o Lacquer (PB) Satin Brass w/o Lacquer (SB) Satin Bronze w/o Lacquer (SBZ) Polished Bronze w/o Lacquer (PB2) Satin Stainless Steel (SS/US2D) Polished Stainless Steel (PS/US2) Finish Custom, 4 Powder Coated Finishes (Specify) Custom Cladding (Specify) Custom Prep/Install of DORMA Competitor Prep Competitor Prep/Install Competitor Electromagnetic Shear Lock or Magnetic Lock Armature Prep Offset Hung Patch Fittings Headers & 1 Tapered Rail (TP) available only with -5/8" rails. 2 5/8" and /4" glass available only with -5/8" and 6" rails. DORMA reserves the right to refuse Custom Finishes. 4 All Custom Finishes require customer sign-off/approval of color chip. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 7

18 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS TOP RAILS, TYPE P, F.D.S 24" TO 50" Default 1/2" (12 mm) unless otherwise specified Square (SQ) DRS Top Rail 886 ( ) Arm Tapered (TP) DRS Top Rail 886 ( ) Arm DRS Top Rail Square (SQ) or Tapered (TP) with 886 ( )Arm Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" TP Ea. 5/8" TP Ea. /4" TP Ea. 9/16" TP Ea. 11/16" (58) -5/8" (4) 4" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

19 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Standard Finishes $ Custom Finishes $ DRS Top Rail Square (SQ) or Tapered (TP) with 886 ( )Arm /109 50/ / / Cladding Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness DRS Rails, Channels & SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" Patch Fittings & Designer Pivots SQ Ea. /8" ,006 SQ Ea. 1/2" ,006 SQ Ea. 5/8" ,018 1, ,020 1,127 SQ Ea. /4" ,018 1, ,020 1,127 Offset Hung Patch Fittings SQ Ea. 9/16" ,101 1, ,10 1,208 SQ Ea. 11/16" ,101 1, ,10 1,208 Laminated NOTES: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted). Shear Locks can be ordered complete with Headers or can be ordered as a separate sales order line item. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed.. Highlighted DRS Rails are available 1 Business Day through Select Service under different part numbers, pre-fab. To 5-/4", including EC2, 886, SQ rail for 1/2" glass. 2-1/2" and -5/8" (SS) available in 101, 108, and 700; 4" (SS) in 101 & /2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Headers & Closers & Locksets Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Model Ref. # Description List $ /8" End Load Top Arm, RTS 50 Pulls & Handles Top Rail Insert for 15 mm Pin Top Rail Adjustable Insert 52 LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm Sliding Systems List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device PREP Electro-Magnetic Shear Lock Armature Prep 150 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 MANET CMP HDWP Competitors hardware prep. (charge may be reviewed based on complexity) 75 CMP HDWI Competitors hardware preparation and installation 150 CMP SHEAR Competitors Electro-Magnetic Shear Lock or Magnetic Lock Armature Prep 18 MITER Miter cut charge 57 Panic Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 9

20 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Square (SQ) DRS Top Rail 55.0 ( ) Insert Tapered (TP) DRS Top Rail 55.0 ( ) Insert DRS Top Rail Square (SQ) or Tapered (TP) with 55.0 ( ) Insert Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" TP Ea. 5/8" TP Ea. /4" TP Ea. 9/16" TP Ea. 11/16" (58) -5/8" (4) 4" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

21 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Standard Finishes $ Custom Finishes $ DRS Top Rail Square (SQ) or Tapered (TP) with 55.0 ( ) Insert /109 50/ / / Cladding Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" ,102 SQ Ea. /4" ,102 SQ Ea. 9/16" ,077 1, ,079 1,18 SQ Ea. 11/16" ,077 1, ,079 1,18 Laminated NOTES: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted). Shear Locks can be ordered complete with Headers or can be ordered as a separate sales order line item. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. 2-1/2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 11

22 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Square (SQ) DRS Top Rail55.9 ( ) Pivot Insert Tapered (TP) DRS Top Rail 55.9 ( ) Pivot Insert DRS Top Rail Square (SQ) or Tapered (TP) with 55.9 ( ) Pivot Insert Profile Ref. # Height Ref. # Height (58) -5/8" (4) 4" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

23 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS Top Rail Square (SQ) or Tapered (TP) with 55.9 ( ) Pivot Insert Profile Ref. # Height Ref. # Height (6) 6" U/M Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" ,010 SQ Ea. 1/2" ,010 SQ Ea. 5/8" ,02 1, ,025 1,11 SQ Ea. /4" ,02 1, ,025 1,11 SQ Ea. 9/16" ,105 1, ,108 1,212 SQ Ea. 11/16" ,105 1, ,108 1,212 Laminated NOTES:. All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail.. Applicator gun sold seperately (94.801). Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted).. Shear Locks can be ordered complete with Headers or can be ordered as a separate sales order line item.. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed.. 2-1/2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 1

24 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS BOTTOM RAILS, NO LOCK Default 1/2" (12 mm) unless otherwise specified Square (SQ) DRS Bottom Rail No Lock8852 ( ) Pivot Tapered (TP) DRS Bottom Rail No Lock8852 ( ) Pivot DRS Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" TP Ea. 5/8" TP Ea. /4" TP Ea. 9/16" TP Ea. 11/16" (58) -5/8" (4) 4" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

25 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" ,028 SQ Ea. 1/2" ,028 SQ Ea. 5/8" ,079 1, ,08 1,151 SQ Ea. /4" ,079 1, ,08 1,151 SQ Ea. 9/16" ,160 1, ,121 1,22 SQ Ea. 11/16" ,160 1, ,121 1,22 Laminated DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & NOTE: Highlighted items 24.07, and are available 1 Business Day through Select Service under different part numbers, pre-fab. To 5-/4", including EC2, 8852, SQ rail for 1/2" glass. 2-1/2" and -5/8" (SS) available in 101, 108, and 700; 4" (SS) in 101 & 700. NOTES: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted). Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. 2-1/2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Closers & Locksets Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Model Ref. # Description List $ /8" End Load BOTTOM Arm, RTS BOTTOM Rail Insert for 15 mm Pin BOTTOM Rail Adjustable Insert 54 LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 CMP HDWP Competitors hardware prep. (charge may be reviewed based on complexity) 75 CMP HDWI Competitors hardware preparation and installation 150 MITER Miter cut charge 57 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Pulls & Handles Sliding Systems MANET Panic NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 15

26 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Square (SQ) DRS Bottom Rail No Lock55.1 ( ) Insert Tapered (TP) DRS Bottom Rail No Lock55.1 ( ) Insert DRS Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert Profile Ref. # Height Ref. # Height (58) -5/8" (4) 4" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

27 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" ,020 SQ Ea. 1/2" ,020 SQ Ea. 5/8" ,070 1, ,029 1,142 SQ Ea. /4" ,029 1,142 SQ Ea. 9/16" ,152 1, ,112 1,22 SQ Ea. 11/16" ,152 1, ,112 1,22 Laminated NOTES:. All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail.. Applicator gun sold seperately (94.801). Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted).. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed.. 2-1/2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 17

28 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Square (SQ) DRS Bottom Rail No Lock7422 ( ) Arm Tapered (TP) DRS Bottom Rail No Lock7422 ( ) Arm DRS Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" (58) -5/8" (4) 4" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

29 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" ,042 SQ Ea. 1/2" ,042 SQ Ea. 5/8" ,117 1, ,054 1,167 SQ Ea. /4" ,117 1, ,054 1,167 SQ Ea. 9/16" ,198 1, ,16 1,247 SQ Ea. 11/16" ,198 1, ,16 1,247 Laminated DRS Rails, Channels & Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles Offset Hung Patch Fittings Headers & NOTES:. All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail.. Applicator gun sold seperately (94.801).. Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted).. 2-1/2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 19

30 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS BOTTOM RAILS, LOCKING Default 1/2" (12 mm) unless otherwise specified Square (SQ) DRS Bottom Rail Locking8852 ( ) Pivot Tapered (TP) DRS Bottom Rail Locking8852 ( ) Pivot DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" TP Ea. 5/8" TP Ea. /4" TP Ea. 9/16" TP Ea. 11/16" (58) -5/8" (4) 4" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

31 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Standard Finishes $ Custom Finishes $ DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 8852 ( ) Pivot Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" , ,060 SQ Ea. 1/2" , ,060 SQ Ea. 5/8" ,114 1, ,074 1,187 SQ Ea. /4" ,114 1, ,074 1,187 SQ Ea. 9/16" ,196 1, ,156 1,267 SQ Ea. 11/16" ,196 1, ,156 1,267 Laminated DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & NOTE: Highlighted items 24.07, and are available 1 Business Day through Select Service under different part numbers, pre-fab. To 5-/4", including EC2, 8852, SQ rail for 1/2" glass. 2-1/2" and -5/8" (SS) available in 101, 108, and 700; 4" (SS) in 101 & 700. NOTES: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail. Applicator gun sold seperately (94.801) Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted). Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed. 2-1/2" Rail in 108 finish will be provided with black (109) end caps. 10" Laminated Rails available Fall Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Model Ref. # Description List $ /8" End Load BOTTOM Arm, RTS BOTTOM Rail Insert for 15 mm Pin BOTTOM Rail Adjustable Insert 54 BRASSLK Bottom Rail Brass Door Lock, 1-9/16" (5/8" Throw) 28 BRASSLK Bottom Rail Brass Door Lock, 1-7/8" (5/8" Throw) 54 BRASSLK 178L Bottom Rail Brass Door Lock, 1-7/8" (5/8" long throw fully retracted projects 1/4" below lock base) 54 BRASSLK Bottom Rail Brass Door Lock, 1-9/16" (5/8" Throw) for 2-1/2" rail only 54 LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 CMP HDWP Competitors hardware prep. (charge may be reviewed based on complexity) 75 CMP HDWI Competitors hardware preparation and installation 150 MITER Miter cut charge 57 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Closers & Locksets Pulls & Handles Sliding Systems MANET Panic NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 21

32 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Square (SQ) DRS Bottom Rail Locking55.1 ( ) Insert Tapered (TP) DRS Bottom Rail Locking55.1 ( ) Insert DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert Profile Ref. # Height Ref. # Height (58) -5/8" (4) 4" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

33 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Standard Finishes $ Custom Finishes $ DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 55.1 ( ) Insert Profile Ref. # Height Ref. # Height (6) 6" U/M Glass Thickness Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" (10) 10" SQ Ea. /8" , ,052 1,020 SQ Ea. 1/2" , ,052 1,020 SQ Ea. 5/8" , ,065 1,178 1,142 SQ Ea. /4" , ,065 1,178 1,142 SQ Ea. 9/16" , ,147 1,258 1,22 SQ Ea. 11/16" , ,147 1,258 1,22 Laminated NOTES:. All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail.. Applicator gun sold seperately (94.801).. Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted).. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed.. 2-1/2" Rail in 108 finish will be provided with black (109) end caps.. 10" Laminated Rails available Fall Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 2

34 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS Square (SQ) DRS Bottom Rail Locking7422 ( ) Arm Tapered (TP) DRS Bottom Rail Locking7422 ( ) Arm DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" TP Ea. 11/16" TP Ea. /8" TP Ea. 1/2" TP Ea. 5/8" TP Ea. /4" TP Ea. 9/16" TP Ea. 11/16" (58) -5/8" (4) 4" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" SQ Ea. 9/16" SQ Ea. 11/16" TP Ea. /8" TP Ea. 1/2" (6) 6" SQ Ea. /8" SQ Ea. 1/2" SQ Ea. 5/8" SQ Ea. /4" NOTE: All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

35 DRS RAILS, CHANNELS & ACCESRIES DRS RAILS DRS Locking Bottom Rail Square (SQ) or Tapered (TP) with 7422 ( ) Arm Profile Ref. # Height Ref. # Height (10) 10" U/M Glass Thickness Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding SQ Ea. /8" ,009 1, ,074 SQ Ea. 1/2" ,009 1, ,074 SQ Ea. 5/8" ,10 1, ,090 1,20 SQ Ea. /4" ,10 1, ,090 1,20 SQ Ea. 9/16" ,211 1, ,171 1,282 SQ Ea. 11/16" ,211 1, ,171 1,282 Laminated NOTES:. All DRS 2-1/2" Rails available now, except /8" and 1/2" glass thicknesses available April 1, Laminated options include 1 ea. tube of adhesive (94.800) and 4 ea. mixing tips (94.802) up to 52" rail.. Applicator gun sold seperately (94.801).. Specify overall rail size and finish when ordering all non-select Service rails (rails not highlighted).. Base Price Includes Rail, Rail Covers/Cladding where appropriate, End Caps and Installed.. 10" Laminated Rails available Fall DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Model Ref. # Description /501 CLYLXBLNK Cylinder Blank 2 2 CYLXCYL Cylinder Cylinder 8 8 CYLXTT Cylinder Thumb Turn 8 8 TTXBLNK Thumb Turn Blank 2 2 TTXTT Thumb Turn Thumb Turn 8 8 CYL Mortise Cylinder for DRS Lock, with split ring TT Mortise Thumb Turn for DRS Lock, with split ring BLNK Mortise Blank (Dummy) Cylinder for DRS Lock, with split ring /8" End Load BOTTOM Arm, RTS BOTTOM Rail Insert for 15 mm Pin BOTTOM Rail Adjustable Insert 54 BRASSLK Bottom Rail Brass Door Lock, 1-9/16" (5/8" Throw) 28 BRASSLK Bottom Rail Brass Door Lock, 1-7/8" (5/8" Throw) 54 BRASSLK 178L Bottom Rail Brass Door Lock, 1-7/8" (5/8" long throw fully retracted projects 1/4" below lock base) 54 LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 52" of pre-assembled rail 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm List $ List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 CMP HDWP Competitors hardware prep. (charge may be reviewed based on complexity) 75 CMP HDWI Competitors hardware preparation and installation 150 MITER Miter cut charge 57 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Closers & Locksets Pulls & Handles Sliding Systems MANET Panic NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 25

36 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS DRS ACCESRIES Standard Finishes $ / /701 Ref. # U/M Description 2-1/2" Square Rail Covers Ft. Anodized (/8" 1/2") Ft. Cladded (/8" 1/2") Ft. Anodized (9/16" /4") Ft. Cladded (9/16" /4") 2 2-1/2" Tapered Rail Covers Ft. Anodized (/8" 1/2") Ft. Cladded (/8" 1/2") Ft. Anodized (9/16" /4") Ft. Cladded (9/16" /4") 2-5/8" Square Rail Cover (/8" 1/2") Ft. Anodized Ft. Cladded 19-5/8" Tapered Rail Cover (/8" 1/2") Ft. Anodized Ft. Cladded 19 4" Square Rail Cover (/8" 1/2") Ft. Anodized Ft. Cladded 19 6" Square Rail Cover (/8" 1/2") Ft. Anodized Ft. Cladded 28 10" Square Rail Cover (/8" 1/2") Ft. Anodized Ft. Cladded 60 NOTES:. Must specify length when ordering. DORMA will cut to specified size, priced per foot (ft.) only.. Maximum length for extrusion is 144" (.7 m) before requiring splice/joint; 120" ( m) for brass or bronze finish. NOTE: Highlighted items above are available Select Service in limited quantity, see Select Service Price Book for PN#s. -5/8" SQ Rail Cover available Select Service in 101, 108, and 700; 4" SQ Rail Cover available in 101 and Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 26 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

37 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS Standard Finishes $ 2-1/2" Rail Covers / /701 DRS Rail Covers for -5/8" and 6", 5/8" and /4" Thick glass Ft. -5/8" Square Cover Ft. 6" Square Cover Closers & Locksets Pulls & Handles Panic MANET Sliding Systems DRS Rails, Channels & Patch Fittings & Designer Pivots Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order 200 Offset Hung Patch Fittings Model Ref. # U/M Description 2-1/2" Square Rail End Caps Finishes $ 101/108/109 50/599/600/ /501 Custom Ea. Anodized Ea. Cladded Ea. Anodized Ea. Cladded /2" Tapered Rail End Caps Ea. Anodized Ea. Cladded Ea. Anodized Ea. Cladded 9 4 Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 27

38 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS Finishes $ 101/108/109 50/599/600/ /501 Custom Model Ref. # U/M Description DRS Rail End Caps Ea. -5/8" Square End Cap /8" & 1/2" Glass Ea. -5/8" Square End Cap 5/8" & /4" Glass Ea. -5/8" Tapered End Cap /8" & 1/2" Glass Ea. 4" Square End Cap /8" & 1/2" Glass Ea. 6" Square End Cap /8" & 1/2" Glass Ea. 6" Square End Cap 5/8" & /4" Glass Ea. 10" Square End Cap (Rails) /8" & 1/2" Glass Ea. 10" Square End Cap (Sidelites) /8" & 1/2" Glass Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order 200 NOTE: Highlighted items above are available Select Service in limited quantity, see Select Service Price Book for PN#s. NOTE: -5/8" SQ End Cap available Select Service in 101, 108, and 700; 4" SQ End Cap available in 101 and 700. * End caps not available in true stainless steel. 500/501 Satin/Polished Chrome end caps supplied when 700/701 finish rails are ordered. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 28 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

39 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS Standard Finishes $ Custom Finishes $ /109 50/ / / Plating Model Ref. # U/M Description DRS Dri-Fit Vertical Stile Ea. /8" (10 mm) Ea. 1/2" (12 mm) DRS Rails, Channels & 1-1/8" 1-7/8" Wide includes endload cap and Dri-Fit gasket (requires Weather Brush or Seal). List $ Patch Fittings & Designer Pivots Weather Brush or Weather Seal Ft. Weather Brush Ft. Weather Seal (Vinyl) 2 Offset Hung Patch Fittings DRS Rail Shim Ea. Stacking Glass Shim (no finish required) 2 Headers & Saddles and Thresholds Ft. Saddle 1/8" Head Typical 5 5 Closers & 1/8" 1/4" Ft. Saddle 1/4", /4"Sill Typical 7 7 Locksets /4" /8" Ft. Saddle /8", 1/2" Sill Typical 5 5 Pulls & Handles 1/2" Sliding Systems MANET Panic Ft. 1/2" 4" Threshold 16' Length 10 NOTE: Vertical Stiles are not available in combination with 10" DRS Rails. 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 29

40 DRS RAILS, CHANNELS & ACCESRIES DRI FIT SIDELITE RAILS DRI-FIT SIDELITE RAILS Ordering Guide Less Covers Ordered Less Covers or Cladding NO SDLT 58 5-/4 SQ 1/2 101 EC2 0 SDLT Model Rail Height 2-1/2" Sidelite Rail -5/8" Sidelite Rail 4" Sidelite Rail 6" Sidelite Rail 10" Sidelite Rail Rail Length Specify Sidelite Profile TP Tapered Rail 1 SQ Square Rail 1/2" Glass /8" Glass 9/16" Glass 5/8" Glass² 11/16" Glass /4" Glass No End Caps for Rail End Cap for Rail (2 each) End Cap for Rail (1 each) 1/2 /8 9/16 5/8 11/16 /4 Glass Thickness End Cap NONE EC2 EC Standard Finish Saddle Height Miter /2 /8 /4 1/4 1/8 NO Clear Anodized (CL) Dark Bronze (DB) Black Anodized (BK) Polished Brass without Lacquer (PB) Satin Brass w/o Lacquer (SB) Satin Bronze w/o Lacquer (SBZ) Polished Bronzed w/o Lacquer (PB2) Satin Stainless Steel (SS/US2D) Polished Stainless Steel (PS/US2) Saddle Finish 100 Mill Aluminum Black Aluminum 999 CCLAD Powder Coated Finishes (Specify) Custom Cladding (Specify) Finish Custom, 4 1 Tapered Rail (TP) available only with -5/8" rails. 2 5/8" and /4" glass available only with -5/8" rails. DORMA reserves the right to refuse Custom Finishes. 4 All Custom Finishes require customer sign-off/approval of color chip. 0 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

41 DRS RAILS, CHANNELS & ACCESRIES DRI FIT SIDELITE RAILS Standard Finishes $ Custom Finishes $ DRS Dri-Fit Sidelite Rails /109 50/ / / Cladding Profile Ref. # Height Ref. # Height (25) 2-1/2" U/M Glass Thickness SQ Ft. /8" SQ Ft. 1/2" SQ Ft. 5/8" SQ 24.2 Ft. /4" SQ Ft. 9/16" TP Ft. 11/16" TP Ft. /8" TP Ft. 1/2" TP Ft. 5/8" TP Ft. /4" TP Ft. 9/16" TP Ft. 11/16" (58) -5/8" (4) 4" SQ Ft. /8" SQ Ft. 1/2" SQ Ft. 5/8" SQ Ft. /4" SQ Ft. 9/16" SQ Ft. 11/16" TP Ft. /8" TP Ft. 1/2" (6) 6" SQ Ft. /8" SQ Ft. 1/2" SQ Ft. 5/8" SQ Ft. /4" (10) 10" SQ Ft. /8" SQ Ft. 1/2" SQ Ft. 5/8" SQ Ft. /4" SQ Ft. 9/16" SQ Ft. 11/16" NOTE: DRS 2-1/2" Sidelite Rails available starting April 1, Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Sliding Systems MANET Panic DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 1

42 DRS RAILS, CHANNELS & ACCESRIES DRI FIT SIDELITE RAILS DRS DRI-FIT SIDELITE RAIL OPTIONS & ACCESRIES Model Description U/M 101/108/109 DRS Sidelite Rail End Caps EC* Finishes $ 50/ / /501 Custom End caps for 2-1/2" rail (includes one attachment screw) Ea. 17 (101/109 only) End caps for -5/8" and 4" rail (includes one attachment screws) Ea End caps for 6" rail (includes two attachment screws) Ea End caps for 10" rail (includes three attachment screws) Ea *Specify EC1 for one (1) end cap, EC2 for two (2) end caps. For EC2, double prices shown. To order by part number, see page 15. NOTES: Specify sidelite rail cut length, glass thickness, saddle height, and finish when ordering. Cut length of sidelite rail does not include end caps. Allow /16" per end cap ordered. Endcaps NOT included, please specify quantity required per sidelite. Saddle, gasket, and setting block included with each sidelite. Pricing per sidelite is per foot (ft).. Maximum length for sidelite is 144" (.7 m) before requiring splice/joint; 120" ( m) for brass or bronze finish. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Model Ref. # Description List $ SADDLE 1/ Saddle for 1/8" height N/C SADDLE /8 & 1/ Saddle for /8" & 1/2" height N/C SADDLE 1/4 & / Saddle for 1/4" & /4" height 2 LSDL Less saddle per ft Deduct 5 MITER Miter cut charge 57 LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 4 roller carriers 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. If saddle is purchased individually, and are $6 list per ft and is $8 per ft.. Prices shown above are for Saddles supplied with sidelite. 2 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

43 DRS RAILS, CHANNELS & ACCESRIES DRI FIT SIDELITE RAILS DRS DRI-FIT SIDELITE RAIL PROFILES & END CAPS Rail Ref. # End Cap Ref. # Description SQ Dri-Fit 2-1/2" TP Dri-Fit 2-1/2" Rail Ref. # End Cap Ref. # Description /8" Anodized /2" Anodized /8" Clad /2" Clad /8" Anodized /4" Anodized /8" Clad /4" Clad /16" Anodized /16" Anodized /16" Clad /16" Clad SQ Dri-Fit 2-1/2" TP Dri-Fit 2-1/2" /8" Anodized /2" Anodized /8" Clad /2" Clad /8" Anodized /4" Anodized /8" Clad /4" Clad /16" Anodized /16" Anodized /16" Clad /16" Clad SQ Dri-Fit -5/8" TP Dri-Fit -5/8" /8" /8" /2" /2" /8" /4" DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Closers & Locksets Panic MANET Pulls & Handles Sliding Systems Headers & SQ Dri-Fit 4" SQ Dri-Fit 6" /8" /8" /2" /2" /8" /4" SQ Dri-Fit 10" /8" /2" Saddle Dimensions for All Dri-Fit Profiles NOTE: Saddle list prices shown are for Saddle purchased with Sidelite. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA

44 DRS RAILS, CHANNELS & ACCESRIES GLAZING & DRI-FIT U-CHANNELS & SIDELITE ACCESRIES GLAZING AND DRI-FIT U-CHANNELS & SIDELITE ACCESRIES Standard Finishes $ Custom Finishes $ Ref. # U/M Description Glazing U-Channel Ft. 1" 1" U-Channel bright silver anodized Ft. 1" 2" U-Channel bright silver anodized 9 29 Standard Finishes $ Custom Finishes $ /109 50/ / / Plating Ref. # U/M Description Dri-Fit Channel for /8" and 1/2" Glass Ft. 1" 1" Dri-Fit Anodized Ft. Cladded (Gasket Required) Ft. 1" 1-/4" Dri-Fit Anodized Ft. Cladded (Gasket Required) Dri-Fit Channel for 5/8" and /4" Glass Ft. 1-1/4" 1" Dri-Fit Anodized Ft. Cladded (Gasket Required) Ft. 1-1/4" 1-/4" Dri-Fit Anodized Ft. Cladded (Gasket Required) DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

45 DRS RAILS, CHANNELS & ACCESRIES GLAZING & DRI-FIT U-CHANNELS & SIDELITE ACCESRIES Standard Finishes $ Custom Finishes $ / / / Plating Ref. # U/M Description Dri-Fit Channel End Cap (Snap Fit) Ea. End cap for both 1" 1" and 1" 1-/4" 5 1 DRS Rails, Channels & Ea. End cap for both 1-1/4" 1" and 1-1/4" 1-/4" 5 Patch Fittings & Designer Pivots Dri-Fit Channel Gasket List $ Ft. Gasket for Vertical Stiles, /8" and 5/8" Glass Gasket for DRS Rail, Sidelite Rails, and Dri-fit U-Channel, /8" & 5/8" Glass Offset Hung Patch Fittings Ft. Gasket for Vertical Stiles, 1/2" and /4" Glass Closers & Locksets Panic MANET Sliding Systems Pulls & Handles Gasket for DRS Rail, Sidelite Rails, and Dri-fit U-Channel, 1/2" & /4" Glass MITER Miter cut charge 57 NOTES:. Must specify length when ordering. DORMA will cut to specified size, priced per foot (Ft.) only.. Maximum length for extrusion is 144" (.7 m) before requiring splice/joint; 120" ( m) for brass or bronze finish. Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order 200 Headers & Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 5

46 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS DRS ACCESRIES Model Ref. # U/M Description List $ DRS Rail Locks Ea. Brass Lock 1-9/16" 5/8" Throw Ea. Brass Lock 1-7/8" 5/8" Throw Ea. Brass Lock 1-7/8" Long Throw, 5/8" Throw When fully retracted, bolt will remain extended 1/4" (6 mm) Ea. Extended Lock Bolt 7/8" Throw Ea. Square Lock Bolt 6 Finishes $ /501 Cylinders Ea. Mortise cylinder for DRS lock, w/split ring. (If cylinder requires Master Keying, lead time is Special Order ) Ea. Mortise Thumb-Turn for DRS Lock, w/split ring Ea. Mortise Blank (Dummy) Cylinder for DRS Lock, w/ split ring 1 1 BTS Offset Arms & Pivots Ea /4" Offset Top Arm (Specify Hand) Ea /2" Offset Top Arm (Specify Hand) NOTE: Cylinders supplied as Keyed Different (KD). For the Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways. NOTE: Highlighted items above are available Select Service in limited quantity, see Select Service Price Book for PN#s. 1 Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 6 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

47 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS Finishes $ Model Ref. # U/M Description /109 50/ /501 BTS Offset Arms & Pivots LH Ea. RH Ea. 752 /4" Offset Bottom Arm, BTS DRS Rails, Channels & LH Ea. RH Ea /2" Offset Bottom Arm, BTS Patch Fittings & Designer Pivots RTS88 Arms & Pivots Ea /8" End Load Top Arm, RTS 55 Offset Hung Patch Fittings Ea Slide Arm for RTS Independent Hung Doors 75 Headers & Ea. 886S 7/8" End Load Top Arm, Glass Door Shoe, RTS 80 Closers & Ea. 8062LOWER CH Top Walking Beam Pivot, Rail Portion Only 25 Locksets Ea. HD8062LOWER Heavy-Duty CH Walking Beam Top Pivot, Rail Portion Only 8 Pulls & Handles NOTE: Highlighted items above are available Select Service in limited quantity, see Select Service Price Book for PN#s. DRS OPTIONS Sliding Systems Option Description List $ HDWPREP Preparation & installation of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 CMP HDWP Competitors hardware prep. (charge may be reviewed based on complexity) 75 CMP HDWI Competitors hardware preparation and installation 150 CMP SHEAR Competitors Electro-Magnetic Shear Lock or Magnetic Lock Armature Prep 18 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 MANET Panic 1 Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 7

48 DRS RAILS, CHANNELS & ACCESRIES DRS ACCESRIES & OPTIONS MECHANICAL CHANNEL & ENDCAP Model Ref. # U/M Description /109 Standard Finishes $ Custom Finishes $ 50/ /601/ / Cladding Mechanical Channel Cover (No Glass Fabrication Required) Ft. Clip-On Cover 118" (2997 mm) max. length Mechanical Channel Endcap Ea. Endcap /8" & 1/2" Ea. Endcap 5/8" & /4" Mechanical Channel Base (No Glass Fabrication Required) 100 Mechanical Channel Clamp Brackets Ft. Base /8" through /4" glass 118" (2997 mm) max. length Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /4" (19 mm) Ea. 5/8" (15 mm) 25 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 8 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

49 PATCH FITTINGS & DESIGNER PIVOTS TABLE OF CONTENTS CENTER HUNG PATCH FITTINGS & DESIGNER PIVOTS Select Service 40 Center Hung Patch Fittings Center Hung Patch Fittings/Transom, Sidelite, and Fin Patch Fittings 44 Connectors Options 52 Standard Sets 54 Designer Pivots ARCOS Patch Fittings/Transom, Sidelite, and Fin Patch Fittings 56 Mechanical Channel 58 TENR Designer Pivot/Hinge 59 VISUR Designer Pivot 60 BEYOND Pinch-Free Pivot 61 Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 9

50 PATCH FITTINGS & DESIGNER PIVOTS SELECT SERVICE SELECT SERVICE QUICK SHIP Patch Fittings & Designer Pivots Select service should be used for small quantities of popular DORMA products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: DORMA receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. DORMA receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. DORMA reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to DORMA. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Product SKUs and prices subject to change without notice.. Some of the available products have quantity per order limits and will be noted accordingly. Key N E "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse Available only in East Coast Warehouse 40 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

51 PATCH FITTINGS & DESIGNER PIVOTS SELECT SERVICE PATCH FITTINGS & DESIGNER PIVOTS /8" 1/2" Glass 2-/4" (70 mm) pivot location PN # Warehouse Product Description Location Glass Finish List $ PT20 Use with PT21 WBP Top patch /8" PT20 Use with PT21 WBP Top patch /8" PT20 Use with PT21 WBP Top patch /8" PT20 Use with PT21 WBP Top patch /8" PT20 Use with PT21 WBP Top patch /8" PT22 Use with RTS Top patch /8" PT22 Use with RTS Top patch /8" PT22 Use with RTS Top patch /8" PT22 Use with RTS Top patch /8" PT22 Use with RTS Top patch /8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /8" PT20 Use with PT21 WBP Top patch 1/2" PT20 Use with PT21 WBP Top patch 1/2" PT20 Use with PT21 WBP Top patch 1/2" PT20 Use with PT21 WBP Top patch 1/2" PT20 Use with PT21 WBP Top patch 1/2" PT22 Use with RTS Top patch 1/2" PT22 Use with RTS Top patch 1/2" PT22 Use with RTS Top patch 1/2" PT22 Use with RTS Top patch 1/2" PT22 Use with RTS Top patch 1/2" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 1/2" Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Sliding Systems Panic MANET DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 41

52 PATCH FITTINGS & DESIGNER PIVOTS SELECT SERVICE PN # Warehouse Product Description Location Glass Finish List $ PT20 Use with PT21 WBP Top patch 5/8" PT20 Use with PT21 WBP Top patch 5/8" PT20 Use with PT21 WBP Top patch 5/8" PT20 Use with PT21 WBP Top patch 5/8" PT20 Use with PT21 WBP Top patch 5/8" PT22 Use with RTS Top patch 5/8" PT22 Use with RTS Top patch 5/8" PT22 Use with RTS Top patch 5/8" PT22 Use with RTS Top patch 5/8" PT22 Use with RTS Top patch 5/8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 5/8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 5/8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 5/8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 5/8" PT10 Use with BTS, 7471K, or 55.5 Bottom patch 5/8" PT20 Use with PT21 WBP Top patch /4" PT20 Use with PT21 WBP Top patch /4" PT20 Use with PT21 WBP Top patch /4" PT20 Use with PT21 WBP Top patch /4" PT20 Use with PT21 WBP Top patch /4" PT22 Use with RTS Top patch /4" PT22 Use with RTS Top patch /4" PT22 Use with RTS Top patch /4" PT22 Use with RTS Top patch /4" PT22 Use with RTS Top patch /4" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" PT10 Use with BTS, 7471K, or 55.5 Bottom patch /4" DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

53 PATCH FITTINGS & DESIGNER PIVOTS SELECT SERVICE Patch Fittings consist of one of: Qty UM HDW PT10 PT20 PT22 /8"-1/2" 5/8"-/4" /8"-1/2" 5/8"-/4" /8"-1/2" 5/8"-/4" 1 Set Fitting Set Covers 9001xx + finish* 1 Ea. End Covers 9001xx + finish* 9002xx + finish* 9001xx + finish* 9001xx + finish* 9002xx + finish* 9001xx + finish* 9001xx + finish* 9002xx + finish* 1 Ea. Insert * See below for finish codes /8"-5/8" 1/2"-/4" /8"-5/8" 1/2"-/4" /8"-5/8" 1/2"-/4" 1 Set Gasket Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Sliding Systems Panic MANET DRS Rails, Channels & Offset Hung Patch Fittings Patch Fitting PT20, PT22, PT10 (5/8", /4", and other glass options) PN # Warehouse Model Description Glass Finish List $ Fitting Fitting only, door / transom PT10, PT20, PT22 5/8" & /4" Fitting Fitting only PT10, PT20, PT22 /8" & 1/2" Cover, Fitting Cover for PT10, PT20, PT22 All Cover, Fitting Cover for PT10, PT20, PT22 All Cover, Fitting Cover for PT10, PT20, PT22 All Cover, Fitting Cover for PT10, PT20, PT22 All Insert 19.2 Insert, PT20 All Insert Insert, PT22 All Insert 19.1 Insert, PT10 All Cover, End Cover for end of fitting, PT10, PT20, PT22 5/8" & /4" Cover, End Cover for end of fitting, PT10, PT20, PT22 5/8" & /4" Cover, End Cover for end of fitting, PT10, PT20, PT22 5/8" & /4" Cover, End Cover for end of fitting, PT10, PT20, PT22 5/8" & /4" Gasket Gasket for PT10, PT20, PT22 1/2"-/4" Gasket Gasket for PT10, PT20, PT22 /8 & 5/8" 5 Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 4

54 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS CENTER HUNG PATCH FITTINGS, COMPLETE (2-/4" (70 MM) PIVOT CENTER LINE) Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Top Patch PT20 (PT21, 25.6, or 19.) 8.10 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) End Cover 5/8" & /4" Top Patch PT22 (RTS) 8.12 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) End Cover 5/8" & /4" Bottom Patch PT10 (BTS, 7471K, or 55.5)) 8.00 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) End Cover 5/8" & /4" Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES:. Patch fitting covers for bronze finish are bronze plating over brass base metal.. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. NOTE: Highlighted items above are available 1 Business Day Select Service (101, 108, 700 & 701 finishes only). 44 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

55 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Transom Patch PT0 with Pivot (19.) End Cover 5/8" & /4" 8.0 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) Transom Patch PT0 with Stop (55.42) 8.2 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings End Cover 5/8" & /4" Transom Patch PT0 with Blank (55.4) 8.4 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) Headers & Closers & End Cover 5/8" & /4" Wall Plate / Ea. Wall Plate / / 7 / Locksets Pulls & Handles Sliding Systems MANET Panic Wall Anchor or Threaded Rod List $ Ea. Wall Anchor Ea. Threaded Rod Anchor 15 Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES:. Patch fitting covers for bronze finish are bronze plating over brass base metal.. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 45

56 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS CENTER HUNG PATCH FITTINGS, COMPLETE (2-/4" (70 MM) PIVOT CENTER LINE) Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Transom/Sidelite Patch Fitting PT40 with Pivot (19.) 8.4 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) End Cover 5/8" & /4" Transom/Sidelite Patch Fitting PT40 with Stop (55.42) 8.6 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) End Cover 5/8" & /4" Transom/Sidelite Patch Fitting PT40 with Blank (55.4) 8.8 Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) End Cover 5/8" & /4" Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES:. Patch fitting covers for bronze finish are bronze plating over brass base metal.. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. 46 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

57 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Transom/Sidelite/Fin Patch Fitting PT41 with Pivot (19.) End Cover 5/8" & /4" 8.55 LH Ea. /8" (10 mm) RH Ea. /8" (10 mm) LH Ea. 1/2" (12 mm) RH Ea. 1/2" (12 mm) LH Ea. 5/8" (15 mm) RH Ea. 5/8" (15 mm) LH Ea. /4" (19 mm) RH Ea. /4" (19 mm) Transom/Sidelite/Fin Patch Fitting PT41 with Stop (55.42) End Cover 5/8" & /4" 8.91 LH Ea. /8" (10 mm) RH Ea. /8" (10 mm) LH Ea. 1/2" (12 mm) RH Ea. 1/2" (12 mm) LH Ea. 5/8" (15 mm) RH Ea. 5/8" (15 mm) LH Ea. /4" (19 mm) RH Ea. /4" (19 mm) Transom/Sidelite/Fin Patch Fitting PT41 with Blank (55.4) End Cover 5/8" & /4" 8.95 LH Ea. /8" (10 mm) RH Ea. /8" (10 mm) LH Ea. 1/2" (12 mm) RH Ea. 1/2" (12 mm) LH Ea. 5/8" (15 mm) RH Ea. 5/8" (15 mm) LH Ea. /4" (19 mm) RH Ea. /4" (19 mm) Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12 mm), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. NOTES:. LH shown above.. Patch fitting covers for bronze finish are bronze plating over brass base metal.. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. Limited quantities available for business day lead-time. Verify availability at time of order.. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Sliding Systems MANET Panic DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 47

58 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS TRANM & SIDELITE CONNECTORS, COMPLETE (2-/4" (70 MM) PIVOT CENTER LINE) Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / / Cladding Transom/90 Sidelite Patch Fitting PT42-90 with Pivot, (19.) LH Ea. 1/2" (12 mm) RH Ea. 1/2" (12 mm) Transom/Sidelite Connector PT60-61 with Stop & Blank Insert, (2.5) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Specify thickness (108 only) Ea. /4" (19 mm) Specify thickness (108 only) Transom/Sidelite/Fin Connector PT60-61 (Specify Thickness) LH Ea. /8" (10 mm) RH Ea. /8" (10 mm) LH Ea. 1/2" (12 mm) RH Ea. 1/2" (12 mm) Transom/Sidelite/Stop Connector PT Ea. /8" (10 mm) Ea. 1/2" (12 mm) Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12 mm), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 48 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

59 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS TRANM & SIDELITE CONNECTOR FITTINGS, COMPLETE Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / Cladding Transom Connector PT70 with 2 Ea. Stops/Blanks Transom/Fin Connector PT Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Specify Thickness Ea. /4" (19 mm) Specify Thickness Ea. /8" (10 mm) Ea. 1/2" (12 mm) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Sidelite Patch Fitting PT Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Specify Thickness Ea. /4" (19 mm) Specify Thickness Patch Fitting Options List $ Closers & Locksets Pulls & Handles Sliding Systems Panic MANET NSTDFIN Custom Fins may be available; other than 1/2" (12 mm), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 49

60 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS CONNECTOR FITTINGS, COMPLETE Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / / Cladding Connector/Fin Fitting PT Ea. /8" (10 mm) Ea. 1/2" (12 mm) Angled Connector PT Angled Connector PT80-90 Short Ea. /8" (10 mm) (108 only) Ea. 1/2" (12 mm) (108 ony) Ea. /8" (10 mm) (108 only) Ea. 1/2" (12 mm) (108 only) Edge Fitting PT90 Corner Fitting PT Ea. /8" (10 mm) 27 2 (108 only) Ea. 1/2" (12 mm) 27 2 (108 only) Ea. 5/8" (15 mm) Specify Thickness (108 only) Ea. /4" (19 mm) Specify Thickness (108 only) Ea. /8" (10 mm) 8 45 (108 only) Ea. 1/2" (12 mm) 8 45 (108 only) Ea. 5/8" (15 mm) Specify Thickness (108 only) Ea. /4" (19 mm) Specify Thickness (108 only) Patch Fitting Options List $ NSTDFIN Custom Fins may be available; other than 1/2" (12 mm), verify with Customer Service. 150 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 50 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

61 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS CONNECTORS, COMPLETE & ACCESRIES Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description /109 50/ / / Cladding Top Patch Fitting PT29 with Wall Mount Pivot Fixing Plate 8.14 Ea. /8" (10 mm) Ea. 1/2" (12 mm) NOTE: 2-/16" (55mm) Pivot Center Line Location. Bottom Pivot Must Use Same Pivot Point! Ea. /8" (10 mm) Ea. 1/2" (12 mm) Patch Lock Fitting AR20 Type F Door Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. 5/8" (15 mm) Ea. /4" (19 mm) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Slide-On Bolt, /8" (10 mm) glass only Ea. /4" (19 mm) 92 Closers & Extended Bolt, 7/8" Throw Ea. Extended Bolt, 7/8" Throw NOTE: When fully retracted, bolt will remain extended 1/4" (6 mm). Extended Bolt, 7/8" Throw Ea. Square Bolt 6 Locksets Pulls & Handles Standard Finishes $ / /501 50/599 Cylinders for Patch Fitting Brass Lock Ea. Mortise cylinder for Patch Fitting lock, w/split ring if cylinder requires master keying lead time goes to Special Order () Ea. Mortise Thumbturn for Patch Fitting Lock, w/split ring Ea. Mortise Blank (Dummy) Cylinder for Patch Fitting Lock, w/split ring NOTES:. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required Sliding Systems MANET Panic 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 51

62 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS CENTER HUNG PATCH FITTING OPTIONS Standard Finishes $ Ref. # U/M Model Description / No Finish Fitting for PT10, PT20, PT22, /8", 28 or 1/2" glass Fitting for PT10, PT20, PT22, PT0, 5/8", or /4" glass Fitting for PT0, /8", or 1/2" glass Fitting for PT40, /8", or 1/2" glass Fitting for PT40, 5/8", or /4" glass Insert for PT10. Use with BTS, 7471K, or Insert for PT20. Use with PT21, PT24, or PT0 with Pivot Insert for PT22 by RTS, Sideload Insert with pivot 19. for PT0, PT40, PT41, PT DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

63 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS Standard Finishes $ Ref. # U/M Model Description / No Finish Insert with stop for PT0, PT40, PT Insert with blank for PT0, PT40, PT41 16 Patch Fittings & Designer Pivots Locksets Pulls & Handles Sliding Systems Panic MANET Closers & DRS Rails, Channels & Cover, patch fitting,. Use with PT10, PT20, PT Cover, end angle, all PT10, PT20, PT22 5/8" or /4" glass N/A Offset Hung Patch Fittings Cover, patch fitting. Use with PT N/A Headers & Cover, patch fitting. Use with PT N/A Cover, all PT0, PT40, PT41 5/8" or /4" glass Gasket mm for use with PT10, PT20, PT22, PT0, PT40 fittings 1/2" or /4" glass Gasket 2 mm for use with PT10, PT20, PT22, PT0, PT40 fittings /8" or 5/8" glass N/A 4 5 Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 5

64 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS STANDARD CENTER HUNG PATCH FITTING SET FOR DOOR Fitting, /8" or 1/2" glass, PT10, PT20, PT Fitting, 5/8 or /4 glass, PT10, PT20, PT Insert fitting, PT10 BTS, 7471K or Insert fitting, PT20 PT Insert fitting, PT22 RTS Patch fitting cover, all glass thicknesses, PT10, PT20, PT End cover, requested for 5/8 or /4 glass thicknesses, PT10, PT20, PT22 54 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

65 PATCH FITTINGS & DESIGNER PIVOTS CENTER HUNG PATCH FITTINGS STANDARD CENTER HUNG PATCH FITTING SET FOR TRANM PT0 Patch Fitting Guide DRS Rails, Channels & Patch Fittings & Designer Pivots Fitting, /8 or 1/2 glass, PT0 Fitting, 5/8 or /4 glass, PT0 Insert fitting, PT0 PT20 Offset Hung Patch Fittings Insert fitting, PT0 when used as stop Insert fitting, PT0 double acting door Patch fitting cover, all glass thicknesses, PT0 Closers & Locksets Panic MANET Sliding Systems Pulls & Handles Headers & Cover PT0, 40, 41 5/8, /4 glass for 5/8 or /4 glass thicknesses, PT0 JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 55

66 PATCH FITTINGS & DESIGNER PIVOTS DESIGNER PIVOTS ARCOS CENTER HUNG PATCH FITTINGS, COMPLETE (2-/16" (55 MM) PIVOT CENTER LINE) Type A, BP, and F Doors Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / / Cladding Top Patch PT20 ARCOS (8062, 25.6, or 19.) Top Patch PT22 ARCOS (RTS) Bottom Patch PT10 ARCOS (BTS, 7471K, or 55.5) Transom Patch PT0 ARCOS with Pivot (19.) Transom Patch PT0 ARCOS with Stop (55.42) Transom Patch PT0 ARCOS with Blank (55.4) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Wall Plate Ea. Wall Plate / / 7 Wall Anchor or Threaded Rod List $ Ea. Wall Anchor Ea. Threaded Rod Anchor 15 Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. 56 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

67 PATCH FITTINGS & DESIGNER PIVOTS DESIGNER PIVOTS Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / / Cladding Transom/Sidelite Patch Fitting PT40 ARCOS with Pivot (19.) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Transom/Sidelite Patch Fitting PT40 ARCOS with Stop (55.42) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Transom/Sidelite Patch Fitting PT40 ARCOS with Blank (55.4) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Transom/Sidelite/Fin Patch Fitting PT41 ARCOS with Pivot (19.), (LH Shown) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Transom / Sidelite / Fin Patch Fitting PT41 ARCOS with Stop (55.42), (LH Shown) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Transom / Sidelite / Fin Patch Fitting PT41 ARCOS with Blank (55.4), (LH Shown) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. All fins are designed for 1/2" glass. Verify with Customer Service to determine if available for other than 1/2" (12 mm).. For 5/8" and /4" thick glass, a relief cut to the hole preparation will be required. DRS Rails, Channels & Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Panic MANET Sliding Systems Offset Hung Patch Fittings Headers & Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 57

68 PATCH FITTINGS & DESIGNER PIVOTS DESIGNER PIVOTS MECHANICAL CHANNEL & ENDCAP Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / /601/ / Cladding Mechanical Channel Cover (No Glass Fabrication Required) Ft. Clip-On Cover 118" (2997 mm) max. height Mechanical Channel Endcap Ea. Endcap /8" & 1/2" Ea. Endcap 5/8" & /4" Mechanical Channel Base (No Glass Fabrication Required) Ft. Base /8" through /4" glass 118" (2997 mm) max. height Ea. /8" (10 mm) Ea. 1/2" (12 mm) Ea. /4" (19 mm) Ea. 5/8" (15 mm) 25 Patch Fitting Options Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 58 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

69 PATCH FITTINGS & DESIGNER PIVOTS DESIGNER PIVOTS TENR DESIGNER PIVOT/HINGE Finishes $ Model Ref. # U/M Description TENR Glass to Wall DRS Rails, Channels & Pr. /8" (10 mm) Pr. 1/2" (12 mm) Patch Fittings & Designer Pivots TENR Glass to Glass Pr. /8" (10 mm) Pr. 1/2" (12 mm) Panic MANET Sliding Systems Pulls & Handles Locksets Closers & Offset Hung Patch Fittings Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 59

70 PATCH FITTINGS & DESIGNER PIVOTS DESIGNER PIVOTS VISUR DESIGNER PIVOT Center Hung Double-Acting All-Glass Door System Safe pinch-free glass door operation for /8" and 1/2" (10 mm and 12 mm) glass Model Ref. # U/M Description 114 VISUR Complete Sets Set DORMA VISUR complete set for single door includes header tube, RTS 88, top and bottom pivot. Please indicate finished opening width Set DORMA VISUR complete set for pair of doors includes header tube, RTS 88, top and bottom pivot. Please indicate finished opening width. Finish $ VISUR Components Ea. DORMA VISUR set composed of RTS 88, top and bottom pivot Ea. DORMA VISUR set composed of top and bottom pivot (without RTS 88) x 4 2 x 4 x 6 1 x 1 x 5 Door Stops 1 1 x 1 x 7 1 x Ea. DORMA VISUR header tube profile for single door. Max. 4-/8" (1100 mm) door 222 panel width. Please indicate finished opening width Ea. DORMA VISUR header tube profile for pair of doors. Max. 2 4-/8" ( mm) door panel width. Please indicate finished opening width Ea. DORMA VISUR header tube cover profile for single door. Max. 4-/8" ( Ea. mm) in fixed length door panel width. Please indicate finished opening width. DORMA VISUR header tube cover profile for pair of doors. Max. 2 4-/8" (1100 mm), in fixed length door panel width. Please indicate finished opening width Ea. DORMA VISUR header tube profile in stock length /16" (200 mm) Ea. DORMA VISUR header tube profile in stock length 157" (4000 mm) Ea. cover profile parts for RTS, -1/2" (90 mm), top Ea. Bottom bearing housing with cover ring Ea. Cover caps, bottom Ea. Glass clamp, top Ea. Glass clamp, bottom Ea. Decorative floor stop with bumper (619 only, equivalent to 700) List $ NOTE: For Visur with RTS, specify 90 or 105, HO or NHO, and spring size 1 Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 60 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

71 PATCH FITTINGS & DESIGNER PIVOTS DESIGNER PIVOTS BEYOND PINCH-FREE PIVOT Center Hung Double-Acting All-Glass Door System Safe pinch-free glass door operation for /8" and 1/2" (10 mm and 12 mm) glass Finishes $ Model Ref. # U/M Description BEYOND Basic Pivot Set Short Pivoting fitting set, short type, consists of: 1 top pivot fitting with pivot 15 mm dia., 1 bottom pivot fitting with insert for DORMA floor closer spindle or round pivot (ordered separately) Set /8" (10 mm) Set 1/2" (12 mm) 561 BEYOND Basic Pivot Set Long Pivoting fitting, long type, with pivot dia. 15 mm at top and insert for DORMA floor closer spindle or round pivot at bottom (ordered separately). Please indicate "exact door height = glass measurement" with order Set /8" (10 mm) Set 1/2" (12 mm) 64 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & BEYOND Components BEYOND Transom fitting, wall connector with plastic socket for top pivot Ea. /8" (10 mm) Ea. 1/2" (12 mm) 278 BEYOND Transom fitting, glass connector with plastic socket for top pivot Ea. /8" (10 mm) Ea. 1/2" (12 mm) 271 Closers & Locksets Pulls & Handles BEYOND Components Ea. Floor Bearing w/round pivot and fixing plate (stainless), includes floor plate Sliding Systems BEYOND Glass Connector Ea. BEYOND glass connector for connection of sidelite at closing side /8" (10 mm) and 1/2" (12 mm) 9 Bearings & Bushings List $ Ea. Top pivot bearing (aluminum) 9 MANET Ea. Eccentric socket, adjustable Ea. Floor Bearing 71 Panic Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 61

72 62 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

73 OFFSET HUNG PATCH FITTINGS TABLE OF CONTENTS OFFSET HUNG PATCH FITTINGS Patch Fittings For Single-Acting 1-11/16" Offset Hung Doors 64 NOTE: Refer to pages for Closers and. For Single-Acting /8", and 1/2" Offset Hung Doors 67 DRS Rails, Channels & Panic MANET Sliding Systems Pulls & Handles Locksets Closers & Patch Fittings & Designer Pivots Headers & Offset Hung Patch Fittings JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 6

74 OFFSET HUNG PATCH FITTINGS PATCH FITTINGS 1-11/16" (4 MM) DOORS Type A and F Doors /8" (10 mm) and 1/2" (12 mm) Thick Glass Offset Patch Fittings, Complete Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / Top of Door, Offset Patch Fitting Ea. LHR (Shown) Ea. RHR Bottom of Door, Offset Patch Fitting Ea. LHR (Shown) Ea. RHR Transom, Offset Pivot Fitting Ea. LHR (Shown) Ea. RHR Transom/ Sidelite, Offset Pivot Fitting Ea. LHR (Shown) Ea. RHR Wall Anchor or Threaded Rod List Add $ Ea. Wall Anchor Ea. Threaded Rod Anchor 15 NOTES: Handing for angle of fin fittings viewed from outside and above as shown in diagram.. Please specify glass thickness when ordering. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE 64 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

75 OFFSET HUNG PATCH FITTINGS PATCH FITTINGS Offset Patch Fittings, Complete Standard Finishes $ Custom Finishes $ Model Ref. # U/M Description / Frame Mount Offset Patch Fitting Ea DRS Rails, Channels & Frame Mount Offset Patch Fitting Ea Patch Fittings & Designer Pivots Frame Mount Offset Patch Fitting Ea. LHR Ea. RHR Glass Door to Glass Sidelite Offset Patch Fitting Ea. LHR (Shown) , Ea. RHR , Wall to Glass Door Offset Patch Fitting Ea. LHR (Shown) , Ea. RHR , Offset Hung Patch Fittings Headers & Closers & Locksets Wall to Glass Door Offset Patch Fitting 12.6 Pulls & Handles Sliding Systems Ea. LHR (Shown) , Ea. RHR , NOTES: Handing for angle of fin fittings viewed from outside and above as shown in diagram.. USA HANDING SHOWN (OPPOSITE EUROPEAN HANDING). LH RH. Please specify glass thickness when ordering. LEFT HAND RIGHT HAND INSIDE Special Fabricated/Finish or Special Order; lead time up to 5 weeks. MANET OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE Panic RHR RIGHT HAND REVERSE JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 65

76 OFFSET HUNG PATCH FITTINGS PATCH FITTINGS Offset Patch Fittings, Complete Standard Finishes $ Custom Finish $ Model Ref. # U/M Description / Top of Door Offset Patch Fitting 12.2 Type A & F shortened 19/2" side only Ea. /8" glass LHR Ea. /8" glass RHR Ea. 1/2" glass LHR Ea. 1/2" glass RHR Bottom of Door Offset Patch Fitting 11.2 Type A & F shortened 19/2 side only Ea. /8" glass LHR Ea. /8" glass RHR Ea. 1/2" glass LHR Ea. 1/2" glass RHR Wall to Glass Door Offset Patch Fitting 12.7 Type A & F shortened 19/2 side only Ea. /8" glass LHR , Ea. /8" glass RHR , Ea. 1/2" glass LHR , Ea. 1/2" glass RHR , Top of Door Offset Patch Fitting 12. Type A & F shortened 19/2 top & side Ea. /8" glass LHR Ea. /8" glass RHR Ea. 1/2" glass LHR Ea. 1/2" glass RHR Bottom of Door Offset Patch Fitting 11. Type A & F shortened 19/2 bottom & side Ea. LHR (Shown) Ea. RHR Ea. RHR Ea. RHR NOTES:. Handing for angle of fin fittings viewed from outside and above as shown in diagram.. Please specify glass thickness when ordering. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE 66 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

77 OFFSET HUNG PATCH FITTINGS PATCH FITTINGS 5/16" (8 MM), /8" (10 MM) & 1/2" (12 MM) DOORS Type A and F Doors /8" (10 mm) and 1/2" (12 mm) Thick Glass Offset Patch Fittings, Complete Standard Finishes $ Custom Finish $ Model Ref. # U/M Description Top and Bottom of Door Offset Patch Fitting Ea. LHR (Shown) Ea. RHR Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Panic MANET Sliding Systems DRS Rails, Channels & Offset Hung Patch Fittings NOTES:. Handing for angle of fin fittings viewed from outside and above as shown in diagram.. Please specify glass thickness when ordering.. Maximum door weight 176lb (80 kg).. Maximum door width 4-1/4 (1100 mm). Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Headers & LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 67

78 68 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

79 HEADERS & ACCESS0RIES TABLE OF CONTENTS HEADERS & ACCESRIES Select Service 70 Headers Ordering Guide 72 HeaderSingle Opening 7 HeaderPaired Opening 74 RTS88 Options 75 Header Extrusions 76 Header Options 77 Floating Header for All-Glass Entrances with Transom Ordering Guide 78 Floating HeaderSingle Opening 79 Floating HeaderPaired Opening 79 Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 69

80 HEADERS & ACCESS0RIES SELECT SERVICE SELECT SERVICE QUICK SHIP Headers & Select service should be used for small quantities of popular DORMA products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: DORMA receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. DORMA receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. DORMA reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to DORMA. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Product SKUs and prices subject to change without notice.. Some of the available products have quantity per order limits and will be noted accordingly. Key N E "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse Available only in East Coast Warehouse 70 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

81 HEADERS & ACCESS0RIES SELECT SERVICE HEADERS & ACCESRIES 2-/4" (70 mm) Pivot Location Ref. # Warehouse Product Description Finish List $ Header 6" 4.5" with 8062 WBP (8062 Pre-Installed) Header 6" 4.5" with 8062 WBP (8062 Pre-Installed) Header 6" 4.5" with RTS Prep (Prepared for RTS) Header 6" 4.5" with RTS Prep (Prepared for RTS) N Header 72" 4.5" with 2 ea WBP (8062 Pre-Installed) N Header 72" 4.5" with 2 ea WBP (8062 Pre-Installed) N Header 72" 4.5" with 2 ea. RTS88 Prep (Prepared for RTS) N Header 72" 4.5" with 2 ea. RTS88 Prep (Prepared for RTS) NOTE: Headers RTS Prep are prepared for RTS installation. RTS sold seperately. Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 71

82 HEADERS & ACCESS0RIES HEADERS HEADERS & ACCESRIES Ordering Guide continued HDR 1D FLTCVR 1/2 below 101 HDR Model Length Specify Specify Length Header Width Doors/Panels None No Door or Panels 2D/2P 2 Doors, 2 Panels w/flat Covers 2D/2GP 2 Doors, 2 Panels w/glazing Pockets 2D/1P 2 Doors, 1 Panel w/flat Covers 2D/1GP 2 Doors, 1 Panel w/glazing Pocket 2D 2 Doors 1D/2P 1 Door, 2 Panels w/flat Covers 1D/2GP 1 Door, 2 Panel w/glazing Pockets 1D/1P 1 Door, 1 Panel w/flat Covers 1D/1GP 1 Door, 1 Panel w/glazing Pocket 1D 1 Door FLTCVR GLZCVR Cover Options Specify Cut Length Panel Two Specify Cut Length Panel One 101 RTS88-5MM Y 105 NHO SZ SHEAR Standard Finish 4-1/8 4-1/ RTS88-5MM Clear Anodized (CL) Dark Bronze (DB) Black Anodized (BK) Polished Brass w/o Lacquer (PB) Satin Brass w/o Lacquer (SB) Satin Bronze w/o Lacquer (SBZ) Polished Bronze w/o Lacquer (PB2) Satin Stainless Steel (SS/US2D) Polished Stainless Steel (PS/US2) 1-/4" 4-1/8" 1-/4" 4-1/2" 2" 6" LH RH Hand Standard Spindle Location Y N RT588-5MM 8062 Paired Closer Bumper Position Specify Length NHO HO Closer Spring Size SZ2 SZ4 BFE BFI SZ Hold/Non-Hold Open Glass Thickness /4 5/8 /8 1/2 EC2 SHEAR Shear Lock Pack of 2 ea. End Caps Miter CCLAD Custom Finish 1,2 Powder Coated Finishes (Specify) Custom Cladding (Specify) 1 DORMA reserves the right to refuse Custom Finishes. 2 All Custom Finishes require customer sign-off/approval of color chip. 72 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

83 HEADERS & ACCESS0RIES HEADERS HEADER, SINGLE OPENING 24" (610 mm) 50" (1270 mm) Model Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding Single with 1-RTS88 (928.xx) Installed, Flat Cover Single Header Base Price Ea. 4-1/8" (105 mm) Ea. 4-1/2" (114 mm) Ea. 6" (152 mm) Single with ( ) Installed, Flat Cover Ea. 4-1/8" (105 mm) Ea. 4-1/2" (114 mm)* Ea. 6" (152 mm) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Single with 1-RTS88 (928.xx) & 1-Shear Lock (9.025) Installed, Sheer Lock Header Cap Ea. 4-1/8" (105 mm) 1,64 1,644 1,81 1,966 1,744 1,794 2, Ea. 4-1/2" (114 mm) 1,64 1,656 1,851 1,991 1,757 1,80 2, Ea. 6" (152 mm) 1,747 1,775 1,92 2,00 1,89 Closers & Locksets Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 MITER Miter cut charge 57 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. Highlighted items are available in 1 business day through select service (101 & 700 finish only).. For headers with RTS, specify 90 or 105, HO or NHO, and spring size.. Anodized headers are finished 4 sides, cladded are finished sides.. Reference header accessories for cladding purchased separately.. Default RTS pivot location is 2-/4" (70 mm) centerline unless otherwise specified.. Specify finished header length for any header above.. End caps are optional and sold in sets of two (2) each.. Headers requiring RTS preparation, less closers, deduct $150 list per closer.. Specify LC at the end of reference number. Example: LC 1 Non-Fabricated item, can ship in 1 business day through Select Service Program, quantities limited. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Pulls & Handles Sliding Systems MANET Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 7

84 HEADERS & ACCESS0RIES HEADERS HEADER, PAIRED OPENING 50" (1270 mm) 100" (2540 mm) Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding Model Ref. # U/M Description Paired with 2-RTS88 (928.xx) Installed, Flat Cover Paired Header Base Price Ea. 4-1/8" 105 mm) ,082 1, ,008 1, Ea. 4-1/2" (114 mm) ,122 1, ,026 1, Ea. 6" (152 mm) ,266 1,426 1,098 Paired with ( ) Installed, Flat Cover 2.08 Ea. 4-1/8" (105 mm) , Ea. 4-1/2" (114 mm) , , Ea. 6" (152 mm) , Ref. # in 101 or 700/701 available Select Service. Paired with 2-RTS88 (928.xx) & 2-Shear Locks (9.025) Installed, Shear Lock Header Cap Ea. 4-1/8" (105 mm),268,288,662,92,488,588 4, Ea. 4-1/2" (114 mm),286,12,702,982,514,606 4, Ea. 6" ( 152 mm),494,550,846 4,006,678 Paired with 1-RTS88 (928.xx) & ( ) Installed, Flat Cover Ea. 4-1/8" (105 mm) , , Ea. 4-1/2" (114 mm) , , Ea. 6" (152 mm) ,08 1, Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 MITER Miter cut charge 57 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTES:. Highlighted items are available in 1 business day through select service (101 & 700 finish only).. For headers with RTS, specify 90 or 105, HO or NHO, and spring size.. Anodized headers are finished 4 sides, cladded are finished sides.. Reference header accessories for cladding purchased separately.. Default RTS pivot location is 2-/4" (70 mm) centerline unless otherwise specified.. Specify finished header length for any header above.. End caps are optional and sold in sets of two (2) each.. Headers requiring RTS preparation, less closers, deduct $150 list per closer. Specify LC at the end of reference number. Example: LC 1 Non-Fabricated item, can ship in 1 business day through Select Service Program, quantities limited. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 74 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

85 HEADERS & ACCESS0RIES HEADERS RTS88 OPTIONS Patch Fittings & Designer Pivots Panic MANET Sliding Systems Offset Hung Patch Fittings Closers & Locksets Pulls & Handles DRS Rails, Channels & Model Ref. # U/M Description List Add $ RTS88 Overhead Concealed Closer Light Opening Force, Exterior Doors Ea. 105 HO BFE (5 mm Ext.) Ea. 105 NHO BFE (5 mm Ext.) 225 RTS88 Overhead Concealed Closer Barrier Free (BFI) Interior Doors Only Ea. 105 HO BFI (5 mm Ext.) Ea. 105 NHO BFI (5 mm Ext.) 225 RTS88 Overhead Concealed Closer Hold Open Heavier Spring Sizes Ea. 90 HO SZ (5 mm Ext.) Ea. 105 HO SZ (5 mm Ext.) 225 RTS88 Overhead Concealed Closer Non-Hold Open Heavier Spring Sizes Ea. 105 NHO SZ (5 mm Ext.) Ea. 90 NHO SZ (5 mm Ext.) 225 NOTES: Highlighted items are available in 1 business day through select service.. DORMA USA, Inc. requires the use of 5 mm Ext. spindles with all Herculite type door applications when supplied with RTS88 overhead concealed closers. This allows for optimum spindle engagement. Inadequate engagement can cause premature wear on the closers and hardware, voiding warranty. 1 Non-Fabricated item, can ship in 1 business day through Select Service Program, quantities limited. Standard or Non-Standard Fabricated; lead time up to business days. Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 75

86 HEADERS & ACCESS0RIES HEADERS HEADER EXTRUSIONS 4-1/8" Wide 1-/4" Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / CLAD Header Tube 9.02 Ft Ft. Clad on sides only Header Flat Cover 9.00 Ft Ft. Clad on face only Header Glazing Pocket/Cover 9.01 Ft Ft. Clad on face only (Gasket Required) Ft. 5/8" (15 mm) & /4" (19 mm) glass 1 1 Header Cover Cap Ea Ea. Clad on face only. Length is -15/16" Dri-Fit Gasket Ft. /8" (10 mm) & 5/8" (15 mm) glass Ft. 1/2" (12 mm) & /4" (19 mm) glass EMSL 2765 Shear Lock Ea. EMSL 2765 Shear Lock (Not Installed) 1,140 EMSL Shear Lock Header Cap Ft Ft. Clad on face only. Length is 12-1/8" NOTES:. Must specify length when ordering header extrustions. DORMA will cut to specified size, priced per foot only.. Maximum overall length 144" (.66M) before requiring a splice joint; 120" (M) for Brass and Bronze finishes. 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 76 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

87 HEADERS & ACCESS0RIES HEADERS 4-1/2" Wide 1-/4" Header Tube Header Flat Cover Header Glazing Pocket/Cover Header Cover Cap Ref. # U/M Description Standard Finishes $ Custom Finishes $ /109 50/ / / CLAD 9.0 Ft Ft. Clad on sides only Ft Ft. Clad on face only Ft Ft. Clad on face only (Gasket Required) Ft. 5/8" (15 mm) & /4" (19 mm) glass Ea Ea. Clad on face only Length is -15/16" Dri-Fit Gasket Ft. /8" (10 mm) & 5/8" (15 mm) glass Ft. 1/2" (12 mm) & /4" (19 mm) glass DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Closers & EMSL 2765 Shear Lock Ea. EMSL 2765 Shear Lock (Not Installed) 1,140 Locksets EMSL Shear Lock Header Cap Ft Ft. Clad on face only. Length is 12-1/8" Pulls & Handles HEADER OPTIONS Sliding Systems Option List Add $ MITER Miter cut charge 57 JAMB Jamb prep. charge includes blocking support if required. Allow up to 5 additional days lead-time. 57 HDWPREP Prep. & Install, DORMA hardware (ie; WBP, closer, panic/strike, etc.) Allow -5 days lead-time PREP Shear Lock, Magnetic Lock, /4" offset pivot prep./install, allow up to 5 days lead-time. 150 CMP HDWP Competitor hardware component prep. (charge may be reviewed based on complexity) 75 CMP HDWI Competitors hardware preparation and installation 150 CMP SHEAR Competitors Shear Lock, Magnetic Lock, Overhead Concealed Closer prep and install 250 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 MANET Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 77

88 HEADERS & ACCESS0RIES FLOATING HEADER FLOATING HEADER FOR ALL-GLASS ENTRANCES WITH TRANM Ordering Guide Header Width continued FHDR 4-1/8 1D/FFH 1/2 101 below FHDR Model Door Width Specify Specify Width Specify NONE Door Width Paired 1-/4" 4-1/8" 1-/4" 4-1/2" Specify Header Length 4-1/8 4-1/2 Doors/Panels 2D/SFH 2D/FFH 1D/SFH 1D/FFH 2 Door, Semi-Floating Header 2 Door, Full Floating Header 1 Door, Semi-Floating Header 1 Door, Full Floating Header 1/2 /8 5/8 /4 Glass Thickness 8062 RTS88-5MM 101 RTS88-5MM Y 105 NHO SZ 101 Clear Anodized (CL) 108 Dark Bronze (DB) 109 Black Anodized (BK) 50 Polished Brass without Lacquer (PB) 599 Satin Brass w/o Lacquer (SB) 600 Satin Bronze w/o Lacquer (SBZ) 601 Polished Bronzed w/o Lacquer (PB2) 700 Satin Stainless Steel (SS/US2D) 701 Polished Stainless Steel (PS/US2) Standard Finish Y N Paired 8062 RTS88-5MM Standard Spindle Location Hold/Non-Hold Open NHO HO Closer Bumper Position Closer Spring Size SZ2 SZ4 BFE BFI SZ 999 CCLAD Powder Coated Finishes (Specify) Custom Cladding (Specify) Finish Custom 1,2 1 DORMA reserves the right to refuse Custom Finishes. 2 All Custom Finishes require customer sign-off/approval of color chip. 78 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

89 HEADERS & ACCESS0RIES FLOATING HEADER FLOATING HEADER, SINGLE OPENING 24" (610 mm) 50" (1270 mm) FLOATING HEADER, PAIRED OPENING Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding Model Ref. # U/M Description Single Floating Header with 1-RTS88 (928.xx) Installed Single Header Base Price Ea. 4-1/8" (105 mm) , , Ea. 4-1/2" (114 mm) , ,405 Single Floating Header with ( ) Installed 2.46 Ea. 4-1/8" (105 mm) , Ea. 4-1/2" (114 mm) ,222 Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order " (1219 mm) 100" (2540 mm) DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Closers & Standard Finishes $ Custom Finishes $ /109 50/ / / Cladding Model Ref. # U/M Description Paired Floating Header with 2-RTS88 (928.xx) Installed Paired Header Base Price Ea. 4-1/8" (105 mm) 1,480 1,514 1,92 2,090 1,788 1,808 2, Ea. 4-1/2" (114 mm) 1,512 1,560 1,998 2,160 1,84 1,842 2,810 Paired Floating Header with ( ) Installed 2.48 Ea. 4-1/8" (105 mm) 1,114 1,148 1,566 1,724 1,422 1,442 2, Ea. 4-1/2" (114 mm) 1,146 1,194 1,62 1,794 1,468 1,476 2,444 Paired Floating Header with 1-RTS88 (928.xx) & ( ) Installed 2.47 Ea. 4-1/8" (105 mm) 1,297 1,1 1,749 1,907 1,605 1,625 2, Ea. 4-1/2" (114 mm) 1,29 1,77 1,815 1,977 1,651 1,659 2,627 Header Options List Add $ PANIC Prep for Glass Panic/Deadbolt Push Bar Device 75 HDWPREP Prep. & Install of DORMA hardware (ie; offset pivots, arms, magnetic lock, etc.) 75 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Locksets Pulls & Handles Sliding Systems MANET NOTES: Must specify length when ordering. DORMA will cut to specified size, priced per foot only. Maximum overall length 144" (.66 m) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. For floating Header with RTS, specify 90 or 105, HO or NHO, and spring size. Headers requiring RTS preparation, less closers, deduct $150 list per closer.. Specify LC at the end of reference number. Example: LC Panic 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 79

90 80 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

91 CLOSERS & HARDWARE TABLE OF CONTENTS CLOSERS & HARDWARE Select Service 82 RTS88 Overhead Concealed Closers and Covers 85 RTS88 86 BTS Floor Closers 90 BTS 94 Shear Locks 97 Locks and Cylinders 98 Strikes, Saddles, and Thresholds 99 Panic Patch Fittings & Designer Pivots MANET Sliding Systems Pulls & Handles Locksets Closers & Headers & Offset Hung Patch Fittings DRS Rails, Channels & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 81

92 CLOSERS & HARDWARE SELECT SERVICE SELECT SERVICE QUICK SHIP Closers & Select service should be used for small quantities of popular DORMA products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: DORMA receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. DORMA receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. DORMA reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to DORMA. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Product SKUs and prices subject to change without notice.. Some of the available products have quantity per order limits and will be noted accordingly. Key N E "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse Available only in East Coast Warehouse 82 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

93 CLOSERS & HARDWARE SELECT SERVICE CLOSERS & HARDWARE RTS Series Ref. # Warehouse Package Spring Stop NHO/HO Extension List $ RTS88 SZ 105 NHO 5 mm RTS88 SZ 105 HO 5 mm RTS88 SZ 90 NHO 5 mm RTS88 SZ 90 HO 5 mm RTS88 BFI 105 NHO 5 mm RTS88 BFI 105 HO 5 mm RTS88 BFE 105 NHO 5 mm RTS88 BFE 105 HO 5 mm RTS88 SZ 105 NHO RTS88 SZ 105 HO RTS88 SZ 90 NHO RTS88 BFE 105 NHO RTS88 BFI 105 NHO 225 Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles Sliding Systems Panic MANET DRS Rails, Channels & Offset Hung Patch Fittings Headers & RTS & Service Items Ref. # Warehouse Model Description Finish List $ CRNR BRKT Header to side Jamb End load arm, 1" web End load arm, 7/8" web End load arm, 5/8" web End load arm, /4" web Offset arm Short floor pivot Tall floor pivot Short threshold pivot Cover, steel Cover, aluminum * 8521E 2-5/16" (Add-On) spindle extension 7 * DORMA recommends never combining RTS88 size BFI, BFE, or SZ2 closer with 8521E add-on extended spindle. These closers may not generate enough power to close and latch a door if used in combination with 8521E. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 8

94 CLOSERS & HARDWARE SELECT SERVICE BTS & Service Items Ref. # Warehouse Product Hand Finish List $ BTS80 Sz. (was BFE) BTS80 Sz. 4 (was SZ) BTS80 Sz. 6 (was SZ2) BTS75V NHO BTS75V BF NHO BTS75V 90 HO (spindle insert) (spindle insert) (spindle insert) (spindle insert) (spindle insert) (spindle insert) (spindle insert) ( spindle insert) RH ( spindle insert) LH (BTS80 cover plate) (BTS80 cover plate) (BTS75V cover plate) (BTS75V cover plate) DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

95 CLOSERS & HARDWARE RTS88 SERIES OVERHEAD CONCEALED CLOSERS & COVERS Ref. # U/M Description List $ RTS88 Closers Barrier Free Exterior (BFE) Ea. 105 HO (5 mm ext.)* Ea. 105 NHO (5 mm ext.)* Ea. 105 HO Ea. 105 NHO RTS88 Closers Barrier Free Interior (BFI) Ea. 105 HO (5 mm ext.)* Ea. 105 NHO (5 mm ext.)* Ea. 105 HO DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Ea. 105 NHO RTS88 Closers Hold Open Ea. 90 (5 mm ext.) Size * Ea. 105 (5 mm ext.) Size * Headers & Ea. 105 Size Ea. 105 Size Ea. 90 Size Ea. 90 Size RTS88 Closers No Hold Open Ea. 105 (5 mm ext.) Size * Ea. 90 (5 mm ext.) Size * Ea. 105 Size Closers & Locksets Ea. 105 Size Ea. 90 Size Ea. 90 Size Pulls & Handles Ea. 90 Size Finishes $ RTS88 Closers Covers** / /501 Model Ea. Cover when installed in Wood Header Sliding Systems Ea. Cover when installed in Alum inum Header Ea. Cover when installed in Steel Header MANET NOTE: Highlighted items are available in 1 business day through select service. * DORMA Glass requires the use of 5 mm extended spindles with ALL Herculite glass door applications when an OHCC is specified. This allows for optimum spindle bite. Inadequate bite can cause premature wear on the closers and hardware, potentially voiding warranty. Spring sizes other than what is listed above are availableplease consult factory. **Always use an auxillary stop in conjunction with RTS88 installations. Panic 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 85

96 CLOSERS & HARDWARE RTS88 SERIES RTS88 HARDWARE Brackets & Arms Model Ref. # U/M Description Finishes $ Brackets Ea. Round Angle Bracket (screws not included) Ea. Screw Package Ea. Corner Bracket Ea. Screw Package Ea. Slotted Angle Bracket (screws not included) Ea. Screw Package 1 Top Arms 100/ Ea. Rail Top Arm End Load 5/8" web depth Ea. Rail Top Arm End Load /4" web depth Ea. Rail Top Arm End Load 7/8" web depth S Ea. Rail Short Top Arm End Load 7/8" web depth Ea. Rail Top Arm End Load 7/8" web depth Ea. Rail Top Arm End Load 1" web depth Ea. Rail Top Arm Side Load 1/2" web depth 55 NOTE: Highlighted items are available in 1 business day through select service. 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 86 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

97 CLOSERS & HARDWARE RTS88 SERIES Arms and Pivots Model Ref. # U/M Description Finishes $ Top Arms Ea. Rail Top Arm Side Load 5/8" web depth 127 DRS Rails, Channels & Ea. Rail Top Slide Arm /4" Offset /4" web depth 75 5 Patch Fittings & Designer Pivots Top Pivots /701 HD Ea. Walking Beam Pivot with 5/8" Pin COMPLETE Heavy Duty HD8062 TOP HD8062 LOWER Ea. Top Walking Beam Pivot with 5/8" Pin (HD) Ea. Top Walking Beam Pivot Door Portion (5/8" Pin) Offset Hung Patch Fittings Headers & Ea. Top Walking Beam Pivot with 1/2" Pin 48 5 Closers & Ea. Top Walking Beam Pivot with 19/2" (15 mm) Pin (Do not use with 55.0, 55.9, or 19.2 inserts) PT Ea. Top Walking Beam Pivot for use with inserts 55.0, 55.9, and 19.2 ( , , and respectively) 8062 LOWER Ea. Top Walking Beam Pivot Door Portion (15 mm Pin) use with 8062 E Ea. Top Walking Beam Pivot Electrified (5/8" Pin) / Locksets Pulls & Handles Sliding Systems 8062COV Ea. Top Walking Beam Pivot Cover Plate 108/109 50/ / / MANET NOTE: Highlighted items are available in 1 business day through select service. Panic 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 87

98 CLOSERS & HARDWARE RTS88 SERIES RTS88 HARDWARE Pivots Model Ref. # U/M Description List $ PT Ea. Top Pivot with Threaded Rod PT Ea. Top Pivot with 6 mm Mounting Plate Finishes $ 25.6 PT24 108/ Ea. mm Mounting Plate / 14 50/ /601/ /701 /4" Top Offset Pivot Ea. /4" Top Offset Pivot /2" Top Offset Pivot Ea. 1-1/2" Top Offset Pivot NOTE: and in 700 or 701 Finish is Satin or Polished Chrome Bronze base metal. 1 Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 88 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

99 CLOSERS & HARDWARE RTS88 SERIES RTS88 HARDWARE Inserts & Header Stops Model Ref. # U/M Description List $ Top Inserts DRS Rails, Channels & * Ea. Top Rail Insert for 15 mm Diameter Pin Ea. Top Rail Insert RTS 85 Patch Fittings & Designer Pivots * Ea. Top Rail Adj. Insert 52 1 Offset Hung Patch Fittings Ea. Bottom fitting insert for PT10, used with BTS closers, or 7471K or 55.5 floor bearings 16 1 * Ea. Top Fitting Insert for 15 mm Pin 16 1 Headers & Ea. Top Fitting Pivot Insert 20 1 Closers & Ea. Top Fitting Sideload Insert RTS Ea. Top Fitting Insert Blank 16 1 Locksets Ea. Top Fitting Insert Stop 20 1 Pulls & Handles Header Stops Standard Finishes $ Custom Finishes $ Ea. Header Stop / /501 50/ /601/ Sliding Systems Extension List $ ** 8521E Ea. RTS88 Spindle Extension * If using with walking beam top portion, use only with walking beam pivot PT21 ( ). Other walking beam pins may not engage properly. ** DORMA recommends never combining RTS88 size BFI, BFE, or SZ2 closer with 8521E add-on extended spindle. These closers may not generate enough power to close and latch a door if used in combination with 8521E. 7 MANET Panic NOTE: Highlighted items are available in 1 business day through select service. 1 Non-Fabricated item, ships in 1 business day Non-Fabricated item, ships in business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 89

100 CLOSERS & HARDWARE BTS SERIES BTS FLOOR CLOSERS LH LEFT HAND How to Determine Hand of Door INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Finishes $ Ref. # U/M Description 100/101 BTS75V Closers Ea. HO Ea. HO Ea. NHO 550 BTS75V Closers Barrier Free (BF) Ea. HO Ea. NHO 550 BTS80 Closers Ea. ANSI Size 4 (Standard) Ea. ANSI Size 6 (Strong) Ea. ANSI Size (BFE) 590 BTS80 Closers EMB (Electromagnetic Hydraulic Hold Open) Ea. ANSI Size 5 Left Hand 1, Ea. ANSI Size 5 Right Hand 1,600 BTS80F Closers (Fire Rated) Ea. ANSI Size 5 Left Hand Ea. ANSI Size 5 Right Hand 600 NOTE: Highlighted items are available in 1 business day through select service. NOTES: Cement box included with all BTS closers listed above. Additional cement boxes available.. EMB handing determined from push side of door. 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 90 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

101 CLOSERS & HARDWARE BTS SERIES BTS FLOOR CLOSERS Covers & Cement Boxes Finishes $ Model Ref. # U/M Description 50/ / / /701 Covers & Cement Boxes Ea. BTS75V Cover DRS Rails, Channels & Patch Fittings & Designer Pivots Ea. BTS80 Cover Offset Hung Patch Fittings Ea. BTS75V Cement Box List $ 44 Headers & Ea. BTS80 Cement Box 45 Closers & TP75V Ea. BTS75V Terrazzo Cover CH 256 Locksets TP8OCH Ea. BTS80 Terrazzo Cover CH TP8OLH Ea. BTS80 Terrazzo Cover LH /4" Offset TP8ORH Ea. BTS80 Terrazzo Cover RH /4" Offset NOTE: Highlighted items are available in 1 business day through select service. 1 Non-Fabricated item, ships in 1 business day Non-Fabricated item, ships in business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks Pulls & Handles Sliding Systems MANET Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 91

102 CLOSERS & HARDWARE BTS SERIES BTS SPINDLES Bottom Spindles Model Ref. # U/M Description List $ Ea. 5/16" Spindle Ea. 1/2" Spindle Ea. 5/8" Spindle Ea. /4" Spindle Ea. 1/16" Spindle Ea. 7/8" Spindle Ea. 1-1/8" Spindle Ea. 1-5/16" Spindle Ea. 1-1/2" Spindle Ea. 1-11/16" Spindle Ea. 1-7/8" Spindle Ea. 2-1/16" Spindle Ea. 2-5/16" Spindle 55 NOTE: Highlighted items are available in 1 business day through select service. 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 92 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

103 CLOSERS & HARDWARE BTS SERIES BTS SPINDLES Model Ref. # U/M Description List $ Bottom Offset Spindles Ea. 5/16" Spindle Left Hand 45 1 DRS Rails, Channels & Ea. 5/16" Spindle Right Hand Ea. 1/2" Spindle Left Hand Ea. 1/2" Spindle Right Hand 45 1 Patch Fittings & Designer Pivots Ea. /4" Spindle Left Hand Ea. /4" Spindle Right Hand 45 1 Offset Hung Patch Fittings Ea. 7/8" Spindle Left Hand Ea. 7/8" Spindle Right Hand 55 Headers & Ea. 1-1/8" Spindle Left Hand Ea. 1-1/8" Spindle Right Hand 55 Closers & Ea. 1-5/16" Spindle Left Hand Ea. 1-5/16" Spindle Right Hand Ea. 1-1/2" Spindle Left Hand 50 Locksets Pulls & Handles Panic MANET Sliding Systems Ea. 1-1/2" Spindle Right Hand 50 NOTE: Highlighted items are available in 1 business day through select service. 1 Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 9

104 CLOSERS & HARDWARE BTS SERIES BTS HARDWARE Arms and Pivots Finishes $ Model Ref. # U/M Description /109 50/ / /701 Bottom Arms Ea. Bottom Arm Ea. Bottom Arm 54 Bottom /4" Offset Arm 101 Bottom 1-1/2" Offset Arm Ea. COMPLETE Left Hand Ea. Right Hand COV Ea. Offset Arm Cover Left Hand Ea. Right Hand Ea. COMPLETE Left Hand Ea. Right Hand COV Ea. Offset Arm Cover Left Hand Ea. Right Hand N/745N Ea. Bottom Slide Arm 118 (100) Bottom / Floor Pivots 101/108/109 50/ /701 List $ Ea. Adjustable Floor Pivot 5/16" to 1/2" (no cover) Ea. Adjustable Floor Pivot Cover Plate Ea. Floor Pivot 5/16" Clearance ext 5 mm 55.5 ext 10 mm 55.5 ext 15 mm Ea. Floor Pivot 1/2" Clearance (5 mm ext.) Ea. Floor Pivot 11/16" Clearance (10 mm ext.) Ea. Floor Pivot 15/16" Clearance (15 mm ext.) (see Handing Chart pg. 90) NOTE: 752 & 152 cover caps in 700 or 701 finish are Satin and Polished Chrome 1 Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 94 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

105 CLOSERS & HARDWARE BTS SERIES BTS HARDWARE Pivots Finishes $ Model Ref. # U/M Description /109 50/ / /701 Floor Pivot with /4" Clearance K Ea. COMPLETE Ea. Floor Pivot Cover / Ea. Floor Pivot /4" Clearance (no cover) 42 1 Floor Pivots List $ 7471K 5 mm ext Ea. Floor Pivot 15/16" Clearance (5 mm ext.) (no cover) Ea. Bottom Pivot 7/8" Web Depth (Adj. /8"-5/8") Ea. Threshold Pivot 7/8" Web Depth (Adj. /16"-7/16") Ea. Bottom Pivot 1-9/16" Web Depth (Adj. 1/4"-1/2") DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Closers & Locksets Ea. Threshold Pivot 1-/8" Web Depth (Adj. /16"-7/16") Ea. Bottom Pivot 1-9/16" Web Depth (Adj. /16"-7/16") Pulls & Handles Sliding Systems NOTE: Highlighted items are available in 1 business day through select service. 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. MANET Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 95

106 CLOSERS & HARDWARE BTS SERIES BTS HARDWARE Inserts Model Ref. # U/M Description List $ Bottom Inserts Ea. Rail Bottom Insert Ea. Fitting Bottom Insert 20 1 Non-Fabricated item, ships in 1 business day 96 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

107 CLOSERS & HARDWARE HARDWARE HARDWARE Shear Locks Ref. # U/M Description Finishes $ Shear Locks Ea. EMSL 2765 Shear Lock not installed 1, EML 71 electromagnetic lock, single door, 750 lb EML 71 BA DP electromagnetic lock, single door, 750 lb with BA bond sensors and DP door position sensors 445 Patch Fittings & Designer Pivots Closers & Panic Locksets MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings EML 72 electromagnetic clock, double door, 750 lb ea EML 72 BA DP electromagnetic lock, double doorm 750 lb ea. 890 with BA bond sensors and DP door position sensors Headers & NOTES: For Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways.. LH housing requires RH profile thumbturn cylinder; RH housing requires LH profile thumbturn cylinder. When retracted, long throw extends beyond lock base by 1/4". 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 97

108 CLOSERS & HARDWARE HARDWARE HARDWARE Locks & Cylinders Locks List $ Ea. Brass Lock 1-9/16" 5/8" Throw (DRS Rail) Ea. Brass Lock 1-7/8" 5/8" Throw (DRS Rail) Ea. Brass Lock 1-7/8" Long Throw* 5/8" Throw (DRS Rail) Ea. Extended Lock Bolt* 7/8" Throw Ea. Square Lock Bolt 6 Finishes $ Cylinders / /501 50/ Ea. Mortise Key Cylinder/ Split Ring (DRS) Ea. Mortise Thumbturn Cylinder/Split Ring (DRS) Ea. Mortise Blank (Dummy) Cylinder for (DRS) Lock, w/split ring Ea. Mortise Key Cylinder/ Blocking Ring (AR20) Ea. Mortise Thumbturn Cylinder/Blocking Ring (AR20) Ea. Mortise Blank (Dummy) Cylinder for AR20 Lock, w/split ring Ea. Mortise Cylinder Rose 15 (108 only) / / Ea. Profile Key Cylinder Ea. Profile Thumbturn Cyl. Right Handed Cam Ea. Left Handed Cam NOTE: Highlighted items are available in 1 business day through select service. NOTES:. For Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways. LH housing requires RH profile thumbturn cylinder; RH housing requires LH profile thumbturn cylinder. * When retracted, long throw extends beyond lock base by 1/4". 1 Non-Fabricated item, ships in 1 business day 5 Non-Fabricated item, ships in 5 business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 98 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

109 CLOSERS & HARDWARE HARDWARE HARDWARE Strikes, Saddles, Threshold Strikes Finishes $ Ref # U/M Description /501 50/ / Ea. Dust Proof Strike Overall Length 1-1/2" DRS Rails, Channels & Patch Fittings & Designer Pivots 108/ Ea. Strike Plate Offset Hung Patch Fittings Ea. Adjustable Strike 27 Panic Closers & Locksets Pulls & Handles MANET Sliding Systems Headers & Saddles and Thresholds Ft. 1/2" 4" Threshold 16 Length 14 Miter Miter cut charge per miter 57 NOTES: Must specify length when ordering. DORMA will cut to specified size, priced per foot only.. Maximum length for extrusions is 144" (.66 m) before requiring a splice joint; 120" ( m) for Brass and Bronze finishes. 1 Non-Fabricated item, ships in 1 business day Non-Fabricated item, ships in business days Special Fabricated/Finish or Special Order; lead time up to 5 weeks. List $ JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 99

110 100 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

111 LOCKSETS TABLE OF CONTENTS LOCKSETS FOR GLASS DOORS CLM9000 Ordering Guide 102 Housing and Strikes Options 10 Cast or Forged Levers 105 Cylinder Types, Keying Options, and Keyways 107 Studio & Junior Studio Lockset Housings and Strikes 108 Junior Office Lockset Housings and Strikes 109 Junior Office Classic Lockset 110 Studio and Junior Levers, Knobs, and 111 ARCOS ARCOS Lockset Housings and Strikes 112 ARCOS 11 Locks for Sliding Doors Locksets, Strikes, and Handles 114 Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 101

112 LOCKSETS CLM9000 CLM9000 Ordering Guide Classroom Intruder w/db Storeroom Classroom Office/Entry (Alt FØ4) Office/Entry Passage/Closet CLM9 905 D Y LRA 700 CLM9 Model Lock Function Conventional Combinated SFIC Combination SFIC (6-Pin) SFIC w/disposable Core SFIC w/temporary Construction Core Less Conventional Core Housing Prepped for Schlage FSIC Less Both Levers/Roses Less Both Levers Less Inside Lever/Rose Less Outside Lever/Rose D C C6 J T L R Cylinder Type Less Levers LLL LB LILR LOLR N Y Lever Handles Trim L118A L117A L114A L11A L112A L110A L109A LVA LNA LFA LDA LAA LGA LTA LCA LRA Satin Stainless Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Designer Lever and A Rose Premium Curved Lever and A Rose Tapered Lever and A Rose Premium Curved Lever and A Rose Swept Lever and A Rose Premium Tubular No Return Lever and A Rose Curved No Return Lever and A Rose Tubular Lever and A Rose Glass Thickness Curved Lever and A Rose /8" /8" Rectangular Lever and A Rose 1/2" 700 Finish RH RHR LH LHR 1/2" LHR 12MM Handing Right Hand Right Hand Reverse Left Hand Left Hand Reverse STRKHSNG LS STRKHSNG WALLSTRK See Page 107 for Keying Cylinder Options XXXX Keying Options 102 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

113 LOCKSETS CLM9000 CLM9000 LOCKSET HOUSING & STRIKES Finish $ Model Ref. # U/M Handing Description 700 CLM9010 D KD 700 Passage/Closet Latch bolt operated by trim either side Ea. RH Ea. LH Ea. RHR Ea. LHR 795 DRS Rails, Channels & Patch Fittings & Designer Pivots CLM9050 D KD 700 CLM905 D KD 700 CLM9070 D KD 700 Office/Entry Latch bolt operated by trim either side except when outside trim locked by stopworks. When outside trim locked, latch bolt retracted by key outside or operated by trim inside Ea. RH Ea. LH Ea. RHR Ea. LHR 945 Office/Entry Latch bolt operated by trim either side except when ouside trim locked by key outside or by inside turn. If outside trim locked, latch bolt actuated by key outside or trim inside. Outside trim remains locked until inside turn set to unlock position or unlocked by key. Auxiliary latch deadlocks latch bolt when door locked Ea. RH Ea. LH Ea. RHR Ea. LHR 967 Classroom Latch bolt operates trim either side, except when outside trim locked by key outside. When outside trim locked, latch bolt operated by trim inside. Auxiliary latch deadlocks latch bolt Ea. RH Ea. LH Ea. RHR Ea. LHR 945 Offset Hung Patch Fittings Headers & Closers & Locksets Pulls & Handles NOTE: Handing Based on American Standards (Opposite Euro DIN Standards) Sliding Systems LH LEFT HAND INSIDE RH RIGHT HAND MANET OUTSIDE INSIDE Panic LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 10

114 LOCKSETS CLM9000 Model Ref. # U/M Description Finish $ 700 CLM9080 D KD 700 Configured Only (CF)* Storeroom - Latch bolt retracted by key outside or trim inside. Outside trim always rigid. Auxiliary Latch deadlocks latch bolt. CLM9080 RH Ea. 945 CLM9080 LH Ea. 945 CLM9080 RHR Ea. 945 CLM9080 LHR Ea. 945 CLM9974 D KD 700 Classroom/Intruder w/dead Bolt - Latch bolt operates trim either side, except when locked by projection of dead bolt. Dead bolt actuated by keyeither side. Inside trim operates both bolts, outside trim remains locked.key either side unlocks outside trim allowing latch bolt actuation. Auxiliary latch deadlocks latch bolt. CLM9974 RH Ea. 1,01 CLM9974 LH Ea. 1,01 CLM9974 RHR Ea. 1,01 CLM9974 LHR Ea. 1,01 NOTES: Reference handing diagram and hand according to the locked side of the opening. Lever handles ordered separately but included in base price above unless otherwise noted, see page Conventional D cylinder is part of base price, KD. For Cylinder and Keying Options such as KA, see Cylinder Types, Keying Options, and Keyways.. Specify, 1/2" (12 mm) or /8" (10 mm) glass thickness. * CF product is configured to order only. No finished goods part numbers exist. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. How to Determine Hand of Door LH LEFT HAND INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE 104 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

115 91192 LOCKSETS CLM9000 Model Ref. # UM Description 700 Finish $ CLM9000 Strikes Ea Sidelite Mount Strike, Non-Handed 795 Patch Fittings & Designer Pivots Locksets Pulls & Handles Sliding Systems MANET Panic Closers & DRS Rails, Channels & Ea Strike for jamb/wall installation, No sidelite, Non-Handed RH. Handed Strike for CLM9974 jamb/wall installation 155 Offset Hung Patch Fittings Headers & LH. Handed Strike for CLM9974 jamb/wall installation 155 Standard Cast or Forged Levers Handing Ea. LAA N/C Ea. LRA N/C Ea. LCA N/C Ea. LTA N/C Ea. LGA N/C Ea. LDA N/C Ea. LNA N/C 5 Custom Fabricated; lead time up to 5 business days. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 105

116 LOCKSETS CLM9000 Finish $ Model Ref. # U/M Description 700 Custom Cast or Forged Levers LFA Ea. LFA 25 LVA Ea. LVA Ea. L110A Ea. L11A Ea. L114A 25 L109A Ea. L109A 25 L112A Ea. L112A 25 L117A Ea. L117A 25 L118A Ea. L118A 25 NOTE: All levers standard with A" style Rose.. LL = Less Lever/ Rose Set, deduct $10. 5 Custom Fabricated; lead time up to 5 business days. 106 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

117 LOCKSETS CLM9000 CYLINDER TYPES, KEYING OPTIONS & KEYWAYS Cylinder Option Description List Add/Deduct $ Conventional Cylinders (non-interchangeable core) D Conventional cylinder Example: CLM9070D N/C KD Keyed differently to a random combination; SC keyway with 2 keys (default) N/C KA2 Keyed alike in pairs to a random combination; SC keyway with 2 keys N/C KA4 Keyed alike in sets of 4 to a random combination; SC keyway with 2 keys N/C 0-Bit Operated by a key blank for easy rekeying; SC, SE keyway with 2 keys N/C 0-Bit Operated by a key blank for easy rekeying; D100 keyway Keys sold separately N/C L 0-Bit Operated by a key blank for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB, 12 GA, SF, WA, YA, YG keyways with 2 keys NSK Non-stock keyed KA quantities other than KA2/KA4; SC keyway with 2 keys 12 MKD Master keyed or SKD, SC, SE, or D100 keyway Keys sold separately 12 NS2 Non-stock keyed double cylinder locks; SC keyway with 2 keys 24 MK2 Master keyed or SKD double cylinder lock; SC, SE, or D100 keyway Keys sold separately 24 CMK Construction master keyed single cylinder locks Keys sold separately 1 CM2 Construction master keyed double cylinder locks Keys sold separately 26 Lock less conventional cylinder and collar Small Format Interchangeable Core Cylinders Example: CLM9070L J Lock with disposable plastic SFIC construction core Example: CLM9070J T C Lock with keyed temporary SFIC construction core (Core may be returned for a full refund) Keys sold separately Lock with combinated SFIC core installed at the factor 1 ; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D100 keyway Keys sold separately Example: CLM9070T Example: CLM9070C Deduct 0 R Housing prepared for Schlage FSIC M9070R 8 N/C DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Closers & Locksets Sliding Systems MANET Panic Pulls & Handles Headers & Cut Keys Ordered Separately Part # Description List $ Change key, master key, construction master key, or control key; 5 BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE section Change key, master key, or control key; SKC selections - D100 etc. 10 Locks will be supplied w/plastic construction core, Option J. Denotes keys must be ordered separately. NOTES: M9985D and M9986D are available MKD, CMK, or 0-bit only. Emergency keys for M9985D and M9986D are or D100 keyway is restricted. Call customer service for DORMA SKC policies. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 107

118 LOCKSETS STUDIO & JUNIOR STUDIO LOCKSET HOUSINGS & STRIKES Finishes $ Model Ref. # U/M Description / / Studio Rondo Lockset Housings for Jambs or Sidelite Applications Non-Locking Ea. /8" (10 mm) Ea. 1/2" (12 mm) Non-Locking, Latch End Ea. /8" (10 mm) Ea. 1/2" (12 mm) Locking (prepared for Europrofile Cylinder) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Locking, Privacy Function, Thumb Turn Included Ea. /8" (10 mm) Ea. 1/2" (12 mm) Strike Housing (Sidelite Mount) Ea. /8" (10 mm) Ea. 1/2" (12 mm) NOTES: Levers are ordered seperately for all locksets, See page 105. Studio Locksets are shipped right hand reverse. Field adjustable to left hand levers. LHR Lockset Requires RH cylinder, RHR Lockset requires LH cylinder Studio Classic Lockset Housings for Jambs or Sidelite Applications Non-Locking Ea. /8" (10 mm) Ea. 1/2" (12 mm) Non-Locking, Latch End Ea. /8" (10 mm) Ea. 1/2" (12 mm) Locking (prepared for Euro Cylinder) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Locking, Privacy Function, Thumb Turn Cylinder Included Ea. /8" (10 mm) Ea. 1/2" (12 mm) Strike Housing (Sidelite Mount) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 108 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

119 LOCKSETS STUDIO & JUNIOR JUNIOR OFFICE LOCKSET HOUSINGS & STRIKES Finishes $ Model Ref. # U/M /501/ DRS Rails, Channels & Junior Office Lockset Housings for Jamb or Sidelite Applications Non-Locking Ea. /8" (10mm) LHR Ea. /8" (10mm) RHR Ea. 1/2" (12mm) LHR Ea. 1/2" (12mm) RHR Locking, (prepared for Europrofile Cylinder) Ea. /8" (10mm) LHR Ea. /8" (10mm) RHR Ea. 1/2" (12mm) LHR Ea. 1/2" (12mm) RHR Strike Housing (Sidelite Mount) Ea. /8" (10mm) LHR Ea. /8" (10mm) RHR Ea. 1/2" (12mm) LHR Ea. 1/2" (12mm) RHR Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Closers & Junior Models Ea. Strike Plate (Double) Locksets NOTES: Levers are ordered separately for all locksets, see page LHR Lockset requires RH cylinder; RHR Lockset requires LH cylinder. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. LH LEFT HAND How to Determine Hand of Door Lock RHR Lock LHR Strike LHR Strike RHR INSIDE RH RIGHT HAND Pulls & Handles Sliding Systems OUTSIDE INSIDE MANET LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Lock LHR Lock RHR Strike RHR Strike LHR Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 109

120 LOCKSETS STUDIO & JUNIOR JUNIOR OFFICE CLASSIC LOCKSET HOUSINGS & STRIKES Finishes $ Model Ref. # Description Junior Office Classic Lockset Housings for Jamb or Sidelight Applications Non-Locking Ea. /8" (10 mm) LHR Ea. /8" (10 mm) RHR Ea. 1/2" (12 mm) LHR Ea. 1/2" (12 mm) RHR Locking (Prepared for Euro Cylinder) Ea. /8" (10 mm) LHR Ea. /8" (10 mm) RHR Ea. 1/2" (12 mm) LHR Ea. 1/2" (12 mm) RHR Strike Housing (Sidelite Mount) Ea. /8" (10 mm) LHR Ea. /8" (10 mm) RHR Ea. 1/2" (12 mm) LHR Ea. 1/2" (12 mm) RHR Strike Plate Ea. (Double) NOTES: Levers are ordered separately for all locksets, see page 105. LHR Lockset requires RH cylinder; RHR.. Lockset requires LH cylinder. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. LH LEFT HAND How to Determine Hand of Door Lock RHR Lock LHR Strike LHR Strike RHR INSIDE RH RIGHT HAND OUTSIDE INSIDE LHR LEFT HAND REVERSE OUTSIDE RHR RIGHT HAND REVERSE Lock LHR Lock RHR Strike RHR Strike LHR 110 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

121 LOCKSETS STUDIO & JUNIOR STUDIO AND JUNIOR LEVERS, KNOB & ACCESRIES Finishes $ Model Ref. # U/M Description Lever Sets Ea. Flat (471) Ea. Tubular (467.1) DRS Rails, Channels & Patch Fittings & Designer Pivots Headers & Offset Hung Patch Fittings Ea. Flat Lever w/knob One Side (450.20) Ea. Angular Lever Ea. Beveled Closers & Ea. Knob, Round (450.0) Locksets Lever Sets 50/ / Ea. Profile Key Cylinder (Euro Cylinder) Pulls & Handles Ea. Profile Thumb Turn Cylinder, Right Hand Cam Ea. Left Handed Cam Sliding Systems NOTES: Euro cylinders are KA by default and KD is a special order direct from Vendor (Kaba), also on pages 11 & 164. LHR Lockset requires RH cylinder; RHR Lockset requires LH cylinder.. For 108 or 109 finish requirements, specify 199 finish and specify to be finished black or dark bronze. Check with factory for availability of 501 or 502 finish requirements. 5 Custom Fabricated; lead time up to 5 business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. MANET Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 111

122 LOCKSETS ARCOS ARCOS LOCKSET HOUSINGS & STRIKES Finishes $ Model Ref. # U/M Description ARCOS Studio Lockset Housings for Jamb or Sidelite Applications Non-Locking Ea. /8" (10 mm) Ea. 1/2" (12 mm) Non-Locking, Latch End Ea. /8" (10 mm) Ea. 1/2" (12 mm) Locking, (prepared for Euro Cylinder) Ea. /8" (10 mm) Ea. 1/2" (12 mm) Locking, Privacy Function, Thumb Turn Included Ea. /8" (10 mm) Ea. 1/2" (12 mm) Strike Housing (Sidelite Mount) Ea. /8" (10 mm) Ea. 1/2" (12 mm) ARCOS Office Lockset Housings for Jamb or Sidelite Applications Non-Locking Ea. /8" (10 mm) LHR Ea. /8" (10 mm) RHR Ea. 1/2" (12 mm) LHR Ea. 1/2" (12 mm) RHR Locking (Prepared for Euro Cylinder) Ea. /8" (10 mm) LHR Ea. /8" (10 mm) RHR Ea. 1/2" (12 mm) LHR Ea. 1/2" (12 mm) RHR Strike Housing (Sidelite Mount) Ea. /8" (10 mm) LHR Ea. /8" (10 mm) RHR Ea. 1/2" (12 mm) LHR Ea. 1/2" (12 mm) RHR NOTES: Levers are ordered separately for all locksets. See Page 11. ARCOS Studio Locksets are shipped right hand reverse. Field adjustable to left hand reverse. ARCOS Office Locksets left hand reverse shown.. LHR Lockset requires RH cylinder; RHR Lockset requires LH cylinder. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 112 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

123 LOCKSETS ARCOS ARCOS ACCESRIES Finishes $ Model Ref. # U/M Description Sets of Levers for Locks with Strikes Ea. Tubular, Mitered Ea. Tubular, Oval DRS Rails, Channels & Patch Fittings & Designer Pivots Ea. Chiseled Offset Hung Patch Fittings NOTE: For 108 or 109 finish requirements, specify 199 finish and specify to be finished black or dark bronze. Panic Headers & Closers & Locksets Pulls & Handles Sliding Systems MANET Finishes $ Model Ref. # U/M Description 50/ /701 Europrofile Ea. Profile Key Cylinder (Euro Cylinder) Ea. Profile Thumb Turn Cylinder, Right Hand Cam Ea. Profile Thumb Turn Cylinder, Left Hand Cam NOTES:. Euro cylinders are KA by default and KD is a special order direct from Vendor (Kaba), also on pages 11 & LHR Lockset requires RH cylinders, RHR Lockset requires LH cyclinder. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 11

124 LOCKSETS LOCKS FOR SLIDING DOORS LOCKSETS, STRIKES & HANDLES Finishes $ Model Ref. # U/M Hook Lock Ea. (Includes wall mounted strike plate) Strike Box Ea Set of Flat Lever Handles Set Set of Tubular Lever Handles Set Flush Pull Set NOTE: Cylinders supplied keyed different (KD). For other cylinder and keying options such as keyed alike (KA) See Cylinder Types, Keying Options, and Keyways. For 108 or 109 finish requirements, specify 199 finish and specify to be finished black or dark bronze. 5 Custom Fabricated; lead time up to 5 business days. 1 Non-Fabricated item, ships in 1 business day. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 114 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

125 PULLS & HANDLES TABLE OF CONTENTS PULLS & HANDLES FOR TEMPERED GLASS DOORS Select Service 116 TG 18 Ladder Pulls Ordering Guide 118 TG 18 Locking and Non-Locking Single and Back-to-Back Ladder Pulls 119 TG TG 9000 Ladder Pulls TG 987 Non-Locking Single and Back-to-Back Ladder Pulls 122 MANET Pulls MANET Decorative Non-Locking Single and Back-to-Back Ladder Pulls 125 TG Decorative Pulls TG 9000 Decorative Pulls and Handles 127 ARCOS & BEYOND Pulls ARCOS and BEYOND Decorative Pulls and Handles 129 Economy Pulls Economical Tubular and Solid Pulls and Handles 10 Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 115

126 PULLS & HANDLES SELECT SERVICE SELECT SERVICE QUICK SHIP Pulls & Handles Select service should be used for small quantities of popular DORMA products that require shipment within 24 hours. The program includes patch fittings, DRS rails, headers, concealed closers and pivots, and pulls and handles. Warehouses have been set up in the east and west for faster delivery nationwide. (Customer responsible for shipping costs FOB.) Subject to Availability Next Business Day Service (Shipment when Purchase Order is received prior to 4:00 PM EST). Examples: DORMA receives P.O. at :59 PM on Monday, order will ship by close of business on Tuesday. DORMA receives P.O. at :59 PM on Friday, order will ship by close of business on the following Monday. Notes: Standard freight and discount schedules and terms of sale apply. Please refer to the current price list for full details. DORMA reserves the right to limit quantities or decline an order if the credit status of the buyer is not satisfactory to DORMA. Orders cannot be cancelled. Select Service Quick Ship available only in the United States. All prices are in U.S. dollars. Product SKUs and prices subject to change without notice.. Some of the available products have quantity per order limits and will be noted accordingly. Key N E "New" to Select Service, Available in East and West Coast Warehouse Available in East and West Coast Warehouse Available only in East Coast Warehouse 116 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

127 PULLS & HANDLES SELECT SERVICE PULLS & HANDLES Economy Handles 2-/4" (70 mm) Pivot Location Ref. # Warehouse Product Description Finish List $ Handle 12" Back to Back Handle 12" Back to Back Handle 12" Back to Back Handle 12" Back to Back Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Headers & Offset Hung Patch Fittings JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 117

128 PULLS & HANDLES ORDERING GUIDE LADDER PULLS Ordering Guide TG18 Model Locking Non-Locking TG18 Function L NL Pull Type SNG B2B Single Back-To-Back NL B2B STD 49 /4" Glass 1-/4" thick wood door /8" or 1/2" glass STD Door Thickness Custom Handle Length EXTBOLT 49" Overall Handle Length 60" Overall Handle Length 72" Overall Handle Length 84" Overall Handle Length XX" (Specify) Overall Handle Length 75ADAPT Custom Paint or Powder Custom Polished Stainless Satin Stainless Finish Back to Back 1/2" glass, std. Pkg R D B2B J B2B12 B2B19 B2B44 B2B80 BLIND SNUT ROSE Fixing Options L C J T Back to Back /4" glass Back to Back 1-/4" wood Schlage FSIC (Less Core) Conventional Cylinder Less Cylinder SFIC (With Core) SFIC (Less Core) Temporary SFIC XXXX Keying Options Back to Back up to -5/16" thick door 1-/4" wood door, not through door Sex Nut, up to -5/16" 1-/8" Dia., /8" to 5/8" thick glass 118 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

129 PULLS & HANDLES TG 18 LADDER PULLS TG 18 LOCKING & NON-LOCKING LADDER PULLS Locking Ladder Pull Configurations Single and Back-To-Back Locking and Non-Locking Pulls Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description DRS Rails, Channels & Back-to-Back Locking Ladder Pull with Small Format Interchangeable Core (SFIC) Cylinder, Less Core (00) Set F L B2B STD 84" 700 1,425 1, Set F L B2B STD 72" 700 1,88 1, Set F L B2B STD 60" 700 1,54 1, Set 2F L B2B STD 49" 700 1,298 1,687 Closers & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Single Sided Locking Ladder Pull with (CYL) Cylinder (SFIC), Less Core (00), or Thumb-Turn (TT) Ea. 2F L SNG STD 49" CYL Ea. 2F L SNG STD 49" TT Cylinder or Thumb-Turn are Top Mounted Headers & Back-to-Back Non-Locking Ladder Pull Ea. F NL B2B STD 84" Ea. F NL B2B STD 72" Ea. F NL B2B STD 60" Ea. 2F NL B2B STD 49" Locksets NOTE: Specify 2 Ea. for a back-to-back set, includes appropriate fixings. Pulls & Handles Single Sided Non-Locking Ladder Pull Ea. F NL SNG STD 84" Ea. F NL SNG STD 72" Ea. F NL SNG STD 60" Ea. 2F NL SNG STD 49" Sliding Systems MANET NOTE: Customer must specify Fixing Pack and adjust List Price accordingly for Non-Locking Single Ladder Pulls. NOTES: Default cylinder for TG 18 L pulls uses "87" Small Format Interchangeable Core (SFIC) cylinder, less core (00). Other cylinder and keying options available, see Cylinder Types, Keying Options, and Keyways Finish is Custom Paint and Powder only. Panic Special Fabricated/Finish or Special Order; lead time up to 9 weeks. Standard or Non-Standard Fabricated; lead time up to business days. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 119

130 PULLS & HANDLES TG 18 LADDER PULLS TG 18 LOCKING & NON-LOCKING LADDER PULLS ACCESRIES Mounting Ref. # Description List $ Kit, EXT BLT THRW MAZ 1-7/16" (7 mm) Adaptor,.75 adaptor allows NL Pull to install in Locking Post Prep Strike, Dustproof, Standard 1-1/8" (29 mm) Mounting Pack, Back-to-back Lock Post, Non-Locking Posts Door Thickness 1-/4" (44 mm) Mounting Pack, Back-to-back, Non-Locking /8" (10 mm) /4" (19 mm) Mounting Pack, Back-to-back, Locking /4" (19 mm) Mounting Pack, Back-to-back Non-Locking Post 1-/8" (4 mm) 1-/4" (44 mm) DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

131 PULLS & HANDLES TG 18 LADDER PULLS Mounting Ref. # Description Door Thickness List $ Mounting Pack, SNG Blind, each in pack (Will not project through door) min. 1-/4" (44 mm) Mounting Pack, Single Non-Locking Sex Nut /4" (19 mm) -1/8" (80 mm) 56 DRS Rails, Channels & Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & Offset Hung Patch Fittings Mounting Pack, Single Non-Locking Rose /8" (10 mm) /4" (19 mm) 54 Headers & Floor Strike Replacement Locking Mechanism 1/2" (1 mm) Washer Pack 14 NOTE: Default cylinder for Locking Ladder pulls uses 87 Small Format Interchangeable Core (SFIC) cylinder, less core (00). Other cylinder and keying options available, see next page. Special Fabricated/Finish or Special Order; lead time up to 9 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 121

132 PULLS & HANDLES TG 18 LADDER PULLS TG 18 CYLINDER TYPES, KEYING OPTIONS & KEYWAYS Cylinder Option Description List Add $ Conventional Cylinders (non-interchangeable core) D Conventional cylinder; Example: CML9070D N/C KD Keyed differently to a random combination; SC keyway with 2 keys (default) N/C KA2 Keyed alike in pairs to a random combination; SC keyway with 2 keys N/C KA4 Keyed alike in sets of 4 to a random combination; SC keyway with 2 keys N/C 0-Bit Operated by a key blank for easy rekeying; SC, SE keyway with 2 keys N/C 0-Bit Operated by a key blank for easy rekeying; D100 keyway Keys sold separately N/C 0-Bit Operated by a key blank for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB, GA, SF, WA, YA, YG keyways with 2 keys 12 NSK Non-stock keyed KA quantities other than KA2/KA4; SC keyway with 2 keys 12 MKD Master keyed or SKD, SC, SE, or D100 keyway Keys sold separately 12 NS2 Non-stock keyed double cylinder locks; SC keyway with 2 keys 24 MK2 Master keyed or SKD double cylinder lock; SC, SE, or D100 keyway Keys sold separately 24 CMK Construction master keyed single cylinder locks Keys sold separately 1 CM2 Construction master keyed double cylinder locks Keys sold separately 26 L Lock less conventional cylinder and collar Small Format Interchangeable Core Cylinders; Example: CML9070L Deduct 0 J Lock with disposable plastic SFIC construction core; Example: CML9070J N/C T C Lock with keyed temporary SFIC construction core; Example: CML9070T (Core may be returned for a full refund) Keys sold separately; Lock with combinated SFIC core installed at the factory 1 ; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D100 keyway; Example: CML9070C Keys sold separately R Housing prepared for Schlage FSIC; Example: CML9070R 8 Ladder Pulls will be supplied w/plastic construction core, Option J. Denotes keys must be ordered separately Cut Keys Ordered Separately Part # Description List $ Change key, master key, construction master key, or control key; 6 BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE section Change key, master key, or control key; SKC selections D100 etc. 10 NOTE: D100 keyway is restricted. Call customer service for DORMA SKC policies. TG 987 STANDARD SIZE NON-LOCKING LADDER PULLS, WITH STRAIGHT FIXING POSTS Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Finish $ Model Ref. # U/M No. Of Fixing Posts Description 700 Back-to-Back 1-1/4" (2 mm) Dia Ea. F L = 60" Ea. 2F L = 42" Ea. 2F L = 6" Ea. 2F L = 18" Ea. 2F L = 12" 82 Available Spring DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

133 PULLS & HANDLES TG 9000 LADDER PULLS Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Finish $ Model Ref. # U/M No. Of Fixing Posts Description 700 Single Sided 1-1/4" (2 mm) Dia Ea. F L = 60" Ea. 2F L = 42" Ea. 2F L = 6" Ea. 2F L = 18" Ea. 2F L = 12" 41 POWDER All Custom powder coated orders will include a net charge per purchase order. 200 List $ DRS Rails, Channels & Patch Fittings & Designer Pivots Model Ref. # U/M Description List $ Set Adaptors needed for all 1.25" diameter pulls, 2 Each in Pack 7 Offset Hung Patch Fittings Set Assembly for SNG Glass Mount /8" /4" (10 17 mm) 1 set Adaptors needed for all 1.25" diameter pulls, 2 Each in Pack (Ordered separately, see above) 10 Headers & Set Assembly for Back-to-Back Glass Mount /8" /4" (10 17 mm) 1 set Adaptors needed for all 1.25" diameter pulls, 2 Each in Pack (Ordered separately, see above) Set Assembly for SNG wood door up to 1-/4" (44 mm) with Rose Adaptors needed for all 1.25" diameter pulls, 2 Each in Pack (Ordered separately, see above) Set Assembly for Back-to-Back wood door up to 1-/4" (44 mm) 1 set Adaptors needed for all 1.25" diameter pulls, 2 Each in Pack (Ordered separately, see above) Set Assembly for SNG blind wood door up to 1-/4" (44 mm) will not project through door 1 set Adaptors needed for all 1.25" diameter pulls, 2 Each in Pack (Ordered separately, see above) Closers & Locksets Pulls & Handles Sliding Systems øg 1-1/4" (2 mm) øs 1" (25 mm) H -/8" (85 mm) fixings required 60" (1524 mm) C to C L (Length) 60" 42" 6" 18" 12" MANET Panic Available Spring 2015 JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 12

134 PULLS & HANDLES TG 9000 LADDER PULLS TG 987 CUSTOM SIZE NON-LOCKING LADDER PULLS, WITH STRAIGHT FIXING POSTS Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Back-to-Back 1-1/4" (2 mm) Dia Ea. F L = 94-1/2" through 110-/16" 1,091 1,200 1, Ea. F L = 74-1/16" through 94-7/16" 944 1,08 1, Ea. F L = 59-1/16" through 74-/4" , Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Single Sided 1-1/4" (2 mm) Dia Ea. F L = 94-1/2" through 110-/16" Ea. F L = 74-1/16" through 94-7/16" Ea. F L = 59-1/16" through 74-/4" Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Back-to-Back 1" (25 mm) Dia Ea. F L = 94-1/2" through 110-/16" 950 1,045 1, Ea. F L = 74-1/16" through 94-7/16" , Ea. F L = 59-1/16" through 74-/4" , Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Single Sided 1" (25 mm) Dia Ea. F L = 94-1/2" through 110-/16" Ea. F L = 74-1/16" through 94-7/16" Ea. F L = 59-1/16" through 74-/4" Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 11-1/16" through 27-1/2" Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 øg 1" (25 mm) 1-1/4" (2 mm) øs 11/16" (18 mm) 1" (25 mm) H 2-15/16" (75 mm) -/8" (85 mm) fixings required C to C L (Length) 59-1/16" (1500 mm) 59-1/16" (1500 mm) Customer Specifies C to C S G Customer Specifies Overall Length H NOTE: When required, rd fixing post is centered on L dimension unless otherwise requested. Any center distance specifically tailored to your requirements. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 124 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

135 PULLS & HANDLES MANET PULLS MANET NON-LOCKING LADDER PULLS, WITH STRAIGHT FIXING POSTS & MANET CLAMPING DISKS Pull Handles for /8" (9 mm) or 1/2" (12 mm) Glass Doors, Back-to-Back (B2B) or Single Sided Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Back-To-Back Ea. 4F 20-1/2" (520 mm) Center-to-Center Length 69-5/16" (1760 mm) 607 1,162 Patch Fittings & Designer Pivots Closers & Pulls & Handles Sliding Systems Locksets 20-1/2" (520 mm) 69-5/16" (1760 mm) DRS Rails, Channels & Headers & Offset Hung Patch Fittings Ea. F 20-1/2" (520 mm) Center-to-Center Length 48-1/16" (1240 mm) 505 1, /2" (520 mm) 48-1/16" (1240 mm) Ea. 2F 20-1/2" (520 mm) Center-to-Center Length 28-/8" (720 mm) /2" (520 mm) 28-/8" (720 mm) 5-7/8" (150 mm) Ea. 2F 5-7/8" (150 mm) Center-to-Center Length 1-/4" (50 mm) /4" (50 mm) MANET Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Panic 1 Non-Fabricated item, ships in 1 business day Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 125

136 PULLS & HANDLES MANET PULLS Pull Handles for /8" (9 mm) or 1/2" (12 mm) Glass Doors, Back-to-Back (B2B) or Single Sided Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Single Sided Ea. 4F 20-1/2" (520 mm) Center-to-Center Length 69-5/16" (1760 mm) /16" (1240 mm) 20-1/2" (520 mm) 69-5/16" (1760 mm) Ea. F 20-1/2" (520 mm) Center-to-Center Length 48-1/16" (1240 mm) /2" (520 mm) Ea. 2F 20-1/2" (520 mm) Center-to-Center Length 28-/8" (720 mm) /2" (520 mm) 28-/8" (720 mm) 5-7/8" (150 mm) Ea. 2F 5-7/8" (150 mm) Center-to-Center Length 1-/4" (50 mm) /4" (50 mm) Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 126 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

137 PULLS & HANDLES TG DECORATIVE PULLS TG 95 DECORATIVE PULLS, STRAIGHT PULL WITH MITERED CORNERS/POSTS Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description Back-to-Back 1-1/4" (2 mm) Dia Ea. F L = 94-1/2" through 110-/16" 1,002 1,102 1, Ea. F L = 74-1/16" through 94-7/16" , Ea. F L = 59-1/16" through 74-/4" , Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 7-7/8" through 27-1/2" DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Single Sided 1-1/4" (2 mm) Dia Ea. F L = 94-1/2" through 110-/16" Ea. F L = 74-1/16" through 94-7/16" Ea. F L = 59-1/16" through 74-/4" Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 7-7/8" through 27-1/2" Back-to-Back 1" (25 mm) Dia Ea. F L = 94-1/2" through 110-/16" 1,265 1,92 1, Ea. F L = 74-1/16" through 94-7/16" 1,120 1,22 1, Ea. F L = 59-1/16" through 74-/4" 975 1,07 1, Ea. 2F L = 4-5/16" through 59" , Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 8-1/4" through 27-1/2" Headers & Closers & Locksets Pulls & Handles Single Sided 1" (25 mm) Dia Ea. F L = 94-1/2" through 110-/16" Ea. F L = 74-1/16" through 94-7/16" Ea. F L = 59-1/16" through 74-/4" Ea. 2F L = 4-5/16" through 59" Ea. 2F L = 27-9/16" through 4-1/4" Ea. 2F L = 8-1/4" through 27-1/2" Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 NOTE: When required, rd fixing post is centered on L dimension unless otherwise requested. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Sliding Systems MANET Panic JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 127

138 L l PULLS & HANDLES TG DECORATIVE PULLS TG DECORATIVE PULLS Pull Handles for 1/2" Glass Doors, Includes Fixings for 1/2" Glass & Roses Standard Finish $ Custom Finish $ Model Ref. # U/M Description TG 980 Bowed Pull, 1-/4" (49 mm) Center-to-Center 1-/16" (0 mm) Set Back-to-Back Ea. Single Sided /16" (15 mm) 1-/4" (50 mm) 1-/4" (45 mm) 1-/16" (0 mm) -11/16" (9 mm) TG 904 Curved Pull, Radius Standoff, 1-1/4" (2 mm) Diameter, 1-/4" (49 mm) Center-to-Center Set Back-to-Back Ea. Single Sided Ø 1-1/4" (2 mm) H R B R 1 R 1-/4" (44 mm) R1 6-7/8" (175 mm) B 8-11/16" (220 mm) H -/8" (85 mm) L 1-/4" (50 mm) TG 906 Curved Pull, Sharp/Straight Standoff, 1-9/16" (40 mm) Dia. 1-/4" (49 mm) Center-to-Center Set Back-to-Back H 1-/4" (50 mm) M øs B R øg Ea. Single Sided ØGØS 1-9/16" (40 mm) R 6-7/8" (175 mm) B 8-/16" (205 mm) H -15/16" (100 mm) M 1" (24 mm) Fixings for TG Handles to Glass Doors 5/16" (8 mm) 9/16" (15 mm) Thick Ea. Back-to-Back M Ea. Back-to-Back M Ea. Single Sided M Ea. Single Sided M Fixings for TG Handles to Glass Doors 1-/8" (5 mm) -15/16" (100 mm) Thick Ea. Back-to-Back M Ea. Back-to-Back M Ea. Single Sided M Ea. Single Sided M Rose Options for TG Pulls Ea. 1-9/16" (40 mm) Rose M Ea. 1-/4" (44 mm) Rose M Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 128 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

139 PULLS & HANDLES ARCOS & BEYOND PULLS ARCOS & BEYOND DECORATIVE PULLS Pulls for /8" (10 mm) and 1/2" (12 mm) Glass Doors Standard Finish $ Custom Finish $ Model Ref. # U/M No. Of Fixing Posts Description DRS Rails, Channels & ARCOS 15-11/16" (98 mm) Length Set 2F 1-/4" (50 mm) Center-to-Center Patch Fittings & Designer Pivots ARCOS 2-1/16" (824 mm) Length Set 2F 29-1/2" (750 mm) Center-to-Center MANET Offset Hung Patch Fittings Closers & Headers & Locksets Pulls & Handles BEYOND, Specify Door Thickness Sliding Systems Set 2F 17-/4" (450 mm) Center-to-Center /8" (10 mm) or 1/2" (12 mm) Set 2F 2-5/8" (600 mm) Center-to-Center /8" (10 mm) or 1/2" (12 mm) Set 2F 5-7/16" (900 mm) Center-to-Center /8" (10 mm) or 1/2" (12 mm) 815 1, ,145 1,128 1,528 Net Add $ POWDER All Custom powder coated orders will include a net charge per purchase order. 200 Panic Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 129

140 PULLS & HANDLES ECONOMY PULLS LID & TUBULAR PULL HANDLES FOR /8" (10 MM) & 1/2" (12 MM) GLASS Finishes $ Model Ref. # U/M Description / / Solid and Tubular, Back-to-Back, 10" & 12" (Center-to-Center) Handles Set 10" (254 mm) Solid Set 10" (254 mm) Tubular Set 12" (05 mm) Solid Set 12" (05 mm) Tubular Solid and Tubular, Single Sided, 10" & 12" (Center-to-Center) Handles Ea. 10" (254 mm) Solid Ea. 10" (254 mm) Tubular Ea. 12" (05 mm) Solid Ea. 12" (05 mm) Tubular Solid and Tubular, Back-to-Back Offset, 10" & 12" (Center-to-Center) Handles Set 10" (254 mm) Solid Set 10" (254 mm) Tubular Set 12" (05 mm) Solid Set 12" (05 mm) Tubular Solid and Tubular, Back-to-Back, 10" & 12" (Center-to-Center) 27-/4" Handles Set 10" 27-/4" ( mm) Solid Set 10" 27-/4" ( mm) Tubular Set 12" 27-/4" ( mm) Solid Set 12" 27-/4" ( mm) Tubular NOTE: Tubular handles include a 1-1/4" (2 mm) washer. 1 Non-Fabricated item, 2-day lead time. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 10 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

141 PULLS & HANDLES ECONOMY PULLS FINGER PULLS & KNOBS FOR /8" (10 MM) & 1/2" (12 MM) GLASS Finishes $ Model Ref. # U/M Description / / / Finger Pulls Ea. Slide-On Pull 2-/4" 1-1/2" (70 mm 8 mm) DRS Rails, Channels & Patch Fittings & Designer Pivots Set Flush Pull (11) Offset Hung Patch Fittings Knobs Closers & Panic MANET Sliding Systems Pulls & Handles Locksets Ea. Glass Knob 114 Headers & 1 Non-Fabricated item, 2-day lead time. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 11

142 12 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

143 SLIDING SYSTEMS TABLE OF CONTENTS SLIDING SYSTEMS AGILE 150 Ordering Guide 14 Manual Sliding Systems Wall and Ceiling Mount 15 and Components 140 Syncro Manual Sliding System Wall and Ceiling Mount 142 and Components 14 AGILE 150 Dormotion Dormotion Sliding Door System, Comfortable Cushioning 147 and Components 150 DRS-120 Ordering GuideDRS and RS Ceiling Mount Sliding Systems 15 and Components 157 RS-120 Wall & Ceiling Mount Sliding Systems 158 and Components 162 Handle Options Sliding Applications Handle Options 164 Patch Fittings & Designer Pivots Panic MANET Sliding Systems Pulls & Handles Locksets Closers & DRS Rails, Channels & Offset Hung Patch Fittings Headers & JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 1

144 SLIDING SYSTEMS AGILE 150 AGILE 150 Ordering Guide AGILE1SP_1FP CEILING NO AGILE Model Panel Type 1SP 1 Sliding Panel 1SP_1FP 1 Sliding, 1 Fixed Panel 2SP 2 Sliding Panels 2SP_2FP 2 Sliding, 2 Fixed Panels FPONLY Fixed Panel Only AGILE 150 Slider STD Clear Opening Width Sliding Panel 1¹ SPECIFY Sliding Panel 2¹ SPECIFY WALL YES STD Standard 1-/16" Overlap CEILING NO SPECIFY Specify Nonstandard Overlap Track Mount Syncro Overlap SPECIFY Fixed Panel 1¹ AGILE Finish Clear Anodized (CL) 101 Similar to Stainless Steel (SSS) 11 Custom Powder 999 SPECIFY Fixed Panel 2¹ 12MM 11 10MM 12MM /8" (10 mm) 1/2" (12 mm) Glass Thickness Width 1 Specify width in inches. 14 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

145 SLIDING SYSTEMS AGILE 150 AGILE 150 MANUAL SLIDING SYSTEM, WALL & CEILING MOUNT 5/16" (8 mm) through 9/16" (15 mm) Glass Door Thickness Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Single Manual Sliding Panel (1SP) Complete Wall Mount Ceiling Mount Unit 0" to 7" (940 mm) Max. track length 74" (1880 mm) Unit 7" to 57" (940 mm to 1448 mm) Max. track length 114" (2896 mm) 1,289 1,71 1,569 1,0 1,410 1,710 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Unit 0" to 7" (940 mm) Max. track length 74" (1880 mm) Unit 7" to 57" (940 mm to 1448 mm) Max. track length 114" (2896 mm) 1,16 1,19 1,416 1,177 1,2 1,557 Headers & AGILE 150 SlidingWall Mount Complete 1 track profile 1 angle profile 2 clamp carriers with stabilizer 2 endstops with safety catch 1 AGILE floor guide. Track brush Calculations for wall mount with 2 overlapping edges Sliding Panel Width = (Clear opening* + 2-/8" (60 mm)). Track Length = (Clear opening* + 2-/8" (60 mm)) 2 Fixed to Glass Closers & Locksets Pulls & Handles * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) AGILE 150 SlidingCeiling Mount Complete 1 track profile 1 cover profile 2 clamp carriers with stabilizer 2 endstops with safety catch 1 AGILE floor guide. Track brush Calculations for ceiling mount with 1 overlapping edge. Sliding Panel Width = (Clear opening* + 1-/16" (0 mm)). Track Length = (Clear opening* + 1-/16" (0 mm)) 2 Fixed to Ceiling Sliding Systems MANET Panic Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 15

146 SLIDING SYSTEMS AGILE 150 Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Two Manual Siding Panels (2SP) Complete Wall Mount Unit 0" to 7" (940 mm) Max. track length 74" (1880 mm) Unit 7" to 57" (940 mm to 1448 mm) Max. track length 114" (2896 mm) 2,741 2,900,01 2,822 2,979,582 Ceiling Mount Unit 0" to 7" (940 mm) Max. track length 74" (1880 mm) Unit 7" to 57" (940 mm to 1448 mm) Max. track length 114" (2896 mm) 2,46 2,544 2,996 2,517 2,62 2,77 AGILE 150 SlidingWall Mount Complete 2 track profiles 2 angle profiles 4 clamp carriers with stabilizer 4 endstops with safety catch 2 AGILE floor guides. Track brush Fixed to Glass Calculations for wall mount with 2 overlapping edges Sliding Panel Width = (Clear opening* + 2-/8" (60 mm)). Track Length = (Clear opening* + 2-/8" (60 mm)) 2 * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) AGILE 150 SlidingCeiling Mount Complete 2 track profiles 2 cover profiles 4 clamp carriers with stabilizer 4 endstops with safety catch 2 AGILE floor guides. Track brush Fixed to Ceiling Calculations for ceiling mount with 2 overlapping edges. Sliding Panel Widths = (Clear opening* + 2-/8" (60 mm)) / 2. Track Length = (Clear opening* + 2-/8" (60 mm)) 2 NOTE: Units will have splice joints. To avoid a splice joint, you must specify NO SPLICE JOINTS on purchase order. Max. length without splice is 144" (.66 m). Standard or Non-Standard Fabricated; lead time up to business days. 16 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

147 SLIDING SYSTEMS AGILE 150 Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Single Manual Sliding Panel with One Fixed Panel (1SP_1FP) Complete Ceiling Mount Only Unit 0" to 7" (940 mm) Max. opening width: 74" (1880 mm) Unit 7" to 57" (940 mm to 1448 mm) Max. opening width: 114" (2896 mm) Additional Linear Foot of Sidelite Inlaid Profile Ft. Track with Sidelite Inlaid Profile for openings greater than 114" (2896 mm) 1,699 1,825 2,119 1,766 1,890 2, Panic DRS Rails, Channels & Patch Fittings & Designer Pivots Closers & Locksets Pulls & Handles MANET Sliding Systems AGILE 150 SlidingWall Mount Complete 1 track profile 1 view profile 1 sidelite fixing profile 2 clamp carriers with stabilizer 2 endstops with safety catch 1 AGILE floor guide 1 bottom sidelite Dri-Fit channel with gasket (equal to fixed panel width). Track brush Offset Hung Patch Fittings Headers & Calculations for ceiling mount with 2 overlapping edges Sliding Panel Width = (Clear opening* + 1-/16" (0 mm) Track Length = (Clear opening* + 1-/16" (0 mm)) 2. Fixed Panel Width = Overall opening width Clear opening width * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) at sidelite with sliding panel open at sliding panel NOTE: Use sidelite inlaid profile when fixed lites are longer than sliding panel width. When ordering, please advise overall opening width AND fixed panel width. Standard or Non-Standard Fabricated; lead time up to business days. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 17

148 SLIDING SYSTEMS AGILE 150 Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Two Manual Siding Panels with Two Fixed Panels (2SP_2FP) Complete Ceiling Mount Only Unit 0" to 7" (940 mm) Max. opening width: 74" (1880 mm) Unit 7" to 57" (940 mm to 1448 mm) Max. opening width: 114" (2896 mm) Additional linear foot of sidelite Inlaid Profile Ft. Track with Sidelite Inlaid Profile for openings greater than 114" (2896 mm),561,807,981,695,97 4, AGILE 150 SlidingWall Mount Complete 2 track profiles 2 view profiles 2 sidelite fixing profiles 4 clamp carriers with stabilizer 4 endstops with safety catch. 2 AGILE floor guides. 2 Bottom sidelite Dri-Fit channels with gasket (equal to fixed panel width). Track brush Calculations for ceiling mount with 2 overlapping edges Sliding Panel Width = (Clear opening* + 2-/8" (60 mm)) / 2 Track Length = Overall opening width. Fixed Panel Width = (Overall opening width Clear opening width) / 2 * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) NOTES: Use sidelite inlaid profile when fixed lites are longer than sliding panel width.. Units will have splice joints. To avoid a splice joint, you must specify NO SPLICE JOINTS on purchase order. Max. length without splice is 144" (.66 m).. When ordering, please advise overall opening width AND fixed panel width. Standard or Non-Standard Fabricated; lead time up to business days. at sidelite w/sliding panel open at sliding panel 18 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

149 SLIDING SYSTEMS AGILE 150 AGILE 150 MANUAL SLIDING SYSTEM, GLASS TO GLASS MOUNT 1/2" (1 mm) or /8" (10 mm) Glass Door Thickness Standard Finishes $ Model Ref. # U/M Description Single Manual Sliding Panel (1SP) Complete Wall Mount Unit 91" (211 mm) Pre-cut track length 41-5/16" Clear opening width Unit 107" (2718 mm) Pre-cut track length 49-1/4" Clear opening width 1,774 1,909 2,001 2,162 Patch Fittings & Designer Pivots Closers & Panic DRS Rails, Channels & Locksets Pulls & Handles Offset Hung Patch Fittings Sliding Systems MANET AGILE 150 SlidingGlass Mount Complete (91") 91" track profile 91" track to glass 91" cover profile 8 plates track to glass 1 set end caps 1 roller kit. 2 track brushes Fixed to Glass Headers & * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) 107" track profile 107" track to glass 107" cover profile 10 plates track to glass 1 set end caps 1 roller kit. track brushes * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) AGILE 150 SlidingGlass Mount Complete (107") Standard or Non-Standard Fabricated; lead time up to business days. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 19

150 SLIDING SYSTEMS AGILE 150 ACCESRIES & COMPONENTS Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Maximum Profile Extrusion Length = 144" (.66 in) Sliding Applications (No Sidelites) Wall or Ceiling Ln. Track Profile Ft. Ceiling or Wall Mount Track Profile Glass Mount Ln. Cover Profile* Ft. for Ceiling Mount Applications Cover Profilefor glass wall mount applications Ln. Angle Profile* Ft. for Wall Mount Applications Sliding Aplications (with Sidelites) Ceiling Ln. Track Profile w/ Sidelites Ft. Ceiling Mount Ft. Fixed Panel Profile* for Track Profile w/ Sidelites Ft. View Protection Profile* to Cover Gap in Entry Area Ft. Inlaid Profile for Sidelite* to Cover Gap in Sidelite Area Where Sliding Panel Does Not Travel AGILE Roller Package 807/ 808 Custom Paint $ List $ Set Endcaps (LH/RH) 2-1/4" (57 mm) for Wall Mount Track Use with Track Profiles Set Endcaps (LH/RH) 2-1/8" (54 mm) for Ceiling Mount Track Use with Track Profiles Set Endcaps (LH/RH) 2-27/2" (72 mm) for Sidelite Mount Track Use with Track Profiles Set Endcaps (LH/RH) for glass to glass mount Use with / Track Profiles Set Roller Package for Use with /8" (9 mm) to 9/16" (14 mm) Glass Doors ( includes track stops and floor guide) Set Track Stops for Use with AGILE Roller Carriers Ea. Floor guide adjustable, 5/16" (8 mm) to 17/2" (1.5 mm) 65 1 * Track components sold separately. Track Profiles shown for application purposes only. * Extrusions ordered in full length are sold at a slight price break over cut lengths. * Drop lengths will not be shipped with order unless specifically requested by customer. 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 140 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

151 SLIDING SYSTEMS AGILE 150 LAMINATED GLASS ACCESRIES Model Ref. # Description List $ LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 DRS Rails, Channels & LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 4 roller carriers 89 Patch Fittings & Designer Pivots MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm Offset Hung Patch Fittings Laminated glass component, pair of clamp carrier plates, backset, and screws Closers & Panic MANET Sliding Systems Pulls & Handles Locksets 24 Headers & NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 141

152 SLIDING SYSTEMS AGILE 150 SYNCRO MANUAL SLIDING SYSTEMS, WALL & CEILING MOUNT 5/16" (8 mm) through 9/16" (15 mm) Glass Door Thickness Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Two Manual Siding Synchronized Panels (2SP) Complete Wall Mount Unit Sliding Panel Width 0" to 9-/8" (1000 mm),249,0,809 Ceiling Mount Unit Sliding Panel Width 0" to 9-/8" (1000 mm),74,467,94 AGILE 150 Syncro Sliding Door GearWall Mount COMPLETE 2 tracks 2 angle profiles 4 clamp carriers with stabilizer and deflection device/cables 4 endstops with safety catch 2 AGILE floor guides. Track brush Calculations for wall mount with 2 overlapping edges Sliding Panel Width = (Clear opening* + 2-/8" (60 mm)) / 2. Track Length = (Clear opening* + 2-/8" (60 mm) 2 Ceiling Mount COMPLETE 2 tracks 2 cover profiles 4 clamp carriers with stabilizer and deflection device/cables 4 endstops with safety catch 2 AGILE floor guides. Track brush Calculations for ceiling mount with 2 overlapping edges. Sliding Panel Width = (Clear opening* + 2-/8" (60 mm)) / 2. Track Length = (Clear opening* + 2-/8" (60 mm) 2 * Allow for handle or lock projection when calculating. (Clear opening + 1-/16" [0 mm] + panel projection allowance for handle/lock) AGILE 150 Syncro Sliding Door Gear Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 142 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

153 SLIDING SYSTEMS AGILE 150 MANUAL SLIDING SYNCRO SYSTEM, ACCESRIES & COMPONENTS Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Maximum Profile Extrusion Length = 144" (.66 in) or Less AGILE Syncro Profiles Ceiling Fixing (cut to length) Ft. Ln. Track Profile for Applications without Sidelites (Cover profile ordered separately) DRS Rails, Channels & Patch Fittings & Designer Pivots Ft. Ln. Track/Sidelite Profile, Drilled (Edge profile and view protection ordered separately) Offset Hung Patch Fittings 0 mm AGILE Syncro Profiles Wall Fixing (cut to length) Ln. Track/Sidelite Profile, Drilled, with Revision Piece (Edge profile and view protection ordered separately) Ft. Ln Ft. Ln. Angle and Track Profiles Drilled Angle and Track Profiles for Wall Fixings between 2 walls, Drilled Headers & Closers & AGILE Syncro Revision Pieces for Track Access (when track is butted to wall on either end) 0 mm Ea. Revision Wall Mounted No Sidelites Locksets 0 mm Ea. Revision Ceiling Mounted Sidelites Pulls & Handles AGILE Syncro Profiles Wall Fixing (cut to length) Ea. Fixed Dimension: 62-1/8" (1578 mm) Sliding Systems Ft. Cut to Length/Ft MANET AGILE Syncro Roller Package List $ Set Roller Package for Use with /8" (8 mm) to 1,965 9/16" (14 mm) Panic Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 14

154 SLIDING SYSTEMS AGILE 150 LAMINATED GLASS ACCESRIES Model Ref. # Description List $ LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 4 roller carriers 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm Laminated glass component, pair of clamp carrier plates, backset, and screws 24 NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. 144 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

155 SLIDING SYSTEMS AGILE 150 Standard Finishes $ Custom Paint $ Model Ref. # U/M Description 807/ Maximum Profile Extrusion Length = 144" (.66 in) or Less AGILE Syncro Endcaps Ea. Endcap Ceiling Mount Track* DRS Rails, Channels & Ea. Endcap Wall Mount Track* Ea. Endcap Track with Sidelite Installation* Patch Fittings & Designer Pivots Optional Offset Hung Patch Fittings 17/2" (1.5 mm) brush 11/16" (17.5 mm) brush Side panel Track brush Sliding door Flat aluminium bar Ln. Brush Profile 17/2" (1.5 mm) for gaps /8" (10 mm) to 1/2" (12 mm) 118" (000 mm) Long Ln. Brush Profile 11/16" (17.5 mm) for gaps 9/16" (14 mm) to 5/8" (16 mm) 118" (000 mm) Long Headers & Ln. Track Brush 49" (1250 mm) (grey color) List $ 22 Closers & Set Spacer for Bi-Parting Sliding Panels Locksets Pulls & Handles Sliding Systems Panic MANET Ea. Floor Guide Adjustable, 5/16" (8 mm) to 17/2" (1.5 mm) Ea. AGILE 150 plate for glass mount includes connecting screws. 26 * Track components sold separately. Track profiles shown for application purposes only. 1 Non-Fabricated item, ships in 1 business day. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 145

156 SLIDING SYSTEMS AGILE 150 MANUAL SLIDING DOOR ACCESRIES & COMPONENTS Model Ref. # U/M Description Maximum Profile Extrusion Length = 157" (4 in) or Less AGILE Wood Door List $ Set Wood Door Accessory Set Version /16" to 1-/4" (28 mm to 44 mm) thickness 607 NOTE: Includes 2 ea. rollers, end stops, and 1 ea. wood door floorguide Finishes $ Ln. Adapter profile wood doors, drilled length 157" (4 m) 1-9/16" (40 mm) wood door ** Ft. Max. length 157" (4 m) 1-/4" (44 mm) wood doors 8 Laminated Glass List $ LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 4 roller carriers 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm Laminated glass component, pair of clamp carrier plates, backset, and screws Ea. Floor guide for Wood Door * Track components sold separately. Track profiles shown for application purposes only. ** Rollers not included. 109 Black Anodized only. NOTES: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M.. AGILE 150 profiles required. Sold separately. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 146 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

157 SLIDING SYSTEMS AGILE 150 DORMOTION DORMOTION SLIDING DOOR SYSTEM, COMFORTABLE CUSHIONING 5/16" (8 mm) through 1/2" (1.5 mm) Glass Door Thickness Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Maximum Profile Extrusion Length = 157" (4 in) or Less DORMOTION Wall Mounted Single Panel Set Type L DORMOTION Ceiling Mounted Single Panel DORMOTIONWall Mount Complete 2 clamp carriers with end stops Anti-jump mechanism Floor guide for all glass thicknesses Both-way DORMOTION cushioning/spring mechanism 2 track end caps. DORMOTION track and angle profile with brush profile Set Min. Width 2-5/8" (80 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 176 lb (80 kg) Set Type XL Set Min. Width 45-5/8" (1160 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 0 lb (150 kg) Set Type L Set Min. Width 2-5/8" (80 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 176 lb (80 kg) Set Type XL Set Min. Width 45-5/8" (1160 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 0 lb (150 kg) 1,644 1,802 2,082 1,696 1,855 1,976 1,450 1,568 1,70 1,502 1,621 1,782 DRS Rails, Channels & Patch Fittings & Designer Pivots Offset Hung Patch Fittings Headers & Closers & Locksets Pulls & Handles DORMOTIONCeiling Mount Complete 2 clamp carriers with end stops Anti-jump mechanism Floor guide for all glass thicknesses Both-way DORMOTION cushioning/spring mechanism 2 track end caps. DORMOTION track and angle profile with brush profile Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Section Details Fixed to Ceiling Sliding Systems MANET Panic Section Details Fixed to Wall JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 147

158 SLIDING SYSTEMS AGILE 150 DORMOTION Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Maximum Profile Extrusion Length = 157" (4 in) or Less DORMOTION Ceiling mounted for installation with One Door and One Fixed Panel Set Type L Set Min. Width 2-5/8" (80 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 176 lb (80 kg) Set Type XL Set Min. Width 45-5/8" (1160 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 0 lb (150 kg) DORMOTION Ceiling mounted for installation with One Door and Two Fixed Panels (Left and Right) 2,167 2,92 2,727 2,25 2,486 2,81 Set Type L Set Min. Width 2-5/8" (80 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 176 lb (80 kg) Set Type XL Set Min. Width 45-5/8" (1160 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 0 lb (150 kg) 2,886,279,446,005,50,565 DORMOTIONCeiling Mount Complete 2 clamp carriers with end stops Anti-jump mechanism Floor guide for all glass thicknesses Both-way DORMOTION cushioning/spring mechanism 2 track end caps DORMOTION track, angle profile, sidelite profile, view protection and filling profile. Requires optional U-Channel, U-Channel end caps, and Dri-fit Gasket NOTE: $100 net cut charge for orders cut at the factory. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Section Details Fixed to Ceiling 148 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST

159 SLIDING SYSTEMS AGILE 150 DORMOTION Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Maximum Profile Extrusion Length = 157" (4 in) or Less DORMOTION Ceiling Mounted for Installation with Two Doors and Two Fixed Panels (Left and Right) Set Type L DORMOTIONCeiling Mount Complete 2 clamp carriers with end stops Anti-jump mechanism Floor guide for all glass thicknesses Both-way DORMOTION cushioning/spring mechanism 2 track end caps DORMOTION track, angle profile, sidelite profile, view protection and filling profile. Requires optional U-Channel, U-Channel end caps, and Dri-fit Gasket NOTE: $290 list cut charge for orders cut at the factory Set Min. Width 2-5/8" (80 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 176 lb (80 kg) Set Type XL Set Min. Width 45-5/8" (1160 mm) Max. Width 56" (1422 mm) Max. Height 108" (274 mm) Max. Weight 0 lb (150 kg) 4,542 5,006 5,102 4,71 5,176 5,092 Patch Fittings & Designer Pivots Closers & Locksets Panic MANET Sliding Systems Pulls & Handles DRS Rails, Channels & Offset Hung Patch Fittings Headers & Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. Section Details Fixed to Ceiling JANUARY 2015 PRICE LIST GLASS SYSTEMS & LUTIONS DORMA 149

160 SLIDING SYSTEMS AGILE 150 DORMOTION MANUAL SLIDING SYSTEM ACCESRIES & COMPONENTS Standard Finishes $ Custom Powder $ Model Ref. # U/M Description Maximum Profile Extrusion Length = 144" (.66 in) or Less Sliding Applications (No Sidelites) Wall or Ceiling Set AGILE Dormotion Set Type L Up to 175 lb (80 kg), Consists of: 2 carriers, with end stops, anti-jump mechanism, floor guide, be-directional cushioning/spring assembly, starter & two end caps Set AGILE Dormotion Set Type XL Up to 1 lb (150 kg), Consists of: 2 carriers, with end stops, anti-jump mechanism, floor guide, be-directional cushioning/spring assembly, starter & two end caps Ln. Dormotion Profile Standard Set Panel without sidelite, track mounted to wall. Consists of: track rail, angle profile & view protection brush Ln. Dormotion Profile Ceiling Track Mount Set Panel without sidelite, track mounted to ceiling. Consists of: track rail, angle profile & view protection brush Ln. Dormotion Profile Track Mount with Sidelites Set Panel with sidelite, track mounted to sidelite. Consists of: track rail, angle profile & view protection & filling profile, view protection brush Pr. Endcap, Dormotion Set (LH/RH) 959 1, , ,106 1,66 1,881 2, (Painted) Model Ref. # Description List $ LGAA M Scotch-Weld EPX plus II applicator with 2:1 and 1:1 plunger 60 LGA M Scotch-Weld Urethane Adhesive, DP 605 NS, off white, 1 tube per 4 roller carriers 89 MTIPS M Scotch-Weld EPX plus II mixing square nozzle, 5. mm Laminated glass component, pair of clamp carrier plates, backset, and screws 24 NOTE: Scotch-Weld Urethane Adhesive, Scotch-Weld EPX plus II applicator, and Scotch-Weld EPX plus II mixing square nozzle are trademarks of M. Standard or Non-Standard Fabricated; lead time up to business days. Special Fabricated/Finish or Special Order; lead time up to 5 weeks. 150 DORMA GLASS SYSTEMS & LUTIONS JANUARY 2015 PRICE LIST