Pneumatic fluidization tool
|
|
|
- Clifford Hamilton
- 5 years ago
- Views:
Transcription
1 Scanmatic Fluidized cone SFK1-600, -800, -1200, -2000, Pneumatic fluidization tool Keeps the material free floating. Detach greater mounting dimension. Manufactures in five models: SFK1-600, -800, -1200, and Smother emptying flow Eliminate binding in silo Correct emptying Fluid cone from the inside
2 Scanmatic Fluidized cone SFK1-600, -800, -1200, -2000, Function: The fluidized cone ensures that the bulk goods remain running and easy to handle by adding a sufficient amount of air to the material. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction: Working pressure: Temperature: Range of use: Accessories: The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counter-flange at the outlet of the silo, and a lowe flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by connection to a threaded steel pipe. Max. 300 kpa Max. 130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for an silo is min. 1/3 of the silo Ø, depending on the angle of the silo cone. Air control valve equipment consisting of slide valve for regulating the necessary air volume and on - off valve controlled by solenoid valve.
3
4 1 0 4 FLUIDIZATION CONE SFK2-200 TS Fluidization cone SFK2-200 Ø 14 M16 Ø 160 Ø 250 Fluid cloth 60 1" Fluidizing gas 1/4" Pressure measurement Ø Ø Ø
5 SFK2-600 TS Fluidization cone SFK2-600 Ø 700 A Bracket Air inlet, conn. R1" Ring Outlet flange Cone = External mantel Fluidizing cloth Perforated cone Flange HC Ø660, 20 holes Ø18 equal spacing Outlet flange A NT 10/ NT 10/ NT 10/ NT 10/ NT 10/
6 SFK2-600 TS Function The fluidized cone is a pneumatic silo emptying arrangement which ensures complete discharge of material from different types of containers. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counter-flange at the outlet of the silo, and a lower flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by connection to a threaded steel pipe. Working pressure Max. 700 kpa Temperature Max. 130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. Range of use As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for this type is Ø m. Accessories Air control valve equipment consisting of slide valve for regulating the necessary air volume and onoff valve controlled by solenoid valve.
7 FLUIDIZED CONE SFK2-800 TS Fluidized cone SFK2-800 Outlet flange A PN 10/ PN 10/ Ø 910 A 65 60º Air inlet conn. Ø1" or 2" Outlet flange Cone Perforerated cone Fluidizing cloth Flange HC Ø 877, 32 holes Ø 18
8 FLUIDIZED CONE SFK2-800 TS Function The fluidized cone ensures that the bulk goods remain running and easy to handle by adding a sufficient amount of air to the material. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counter flange at the outlet of the silo, and a lower flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by connection to a threaded steel pipe. Working pressure Max. 300 kpa Temperature Max. 130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. Range of use As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for this type of cone is m. Accessories Air control valve equipment consisting of slide valve for regulating the necessary air volume and on - off valve controlled by a solenoid valve.
9 SFK TS Fluidization cone SFK Ø Air inlet conn. 2" Outletflange PN 10/con. 250 Cone Perforated cone Fluidizing cloth Flange HC Ø 1260, 40 holes Ø 18
10 SFK TS Function The fluidized cone ensures that the bulk goods remain running and easy to handle by adding a sufficient amount of air to the material. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counterflange at the outlet of the silo, and a lower flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by connection to a threaded steel pipe. Working pressure Max. 300 kpa Temperature Max.130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. Range of use As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for this type is m. Accessories Air control valve equipment consisting of slide valve for regulating the necessary air volume and on - off valve controlled by solenoid valve.
11 SFK Welded flange TS Fluidization cone SFK-2000 Svetsfläns Ø2040 Ø Ø1500 Outlet flange PN10 DN250 Cone Air distribution pipe Air distribution pip Fluidizing cloth Flange
12 SFK Welded flange TS Function The fluidized cone ensures that the bulk goods remain running and easy to handle by adding a sufficient amount of air to the material. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counter flange at the outlet of the silo, and a lower flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by connection to a threaded steel pipe. Working pressure Max. 300 kpa Temperature Max. 130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. Range of use As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for this type is m. Accessories Air control valve equipment consisting of slide valve for regulating the necessary air volume and on - off valve controlled by solenoid valve.
13 SFK TS Fluidization cone SFK Ø Outlet flange PN10, DN Cone Perforated cone Inspection cover Air distributionpipe Fluidizing cloth Air distributionpipe Air divider Air connection PN10, DN100 Flange
14 SFK TS Function The fluidized cone is a pneumatic silo emptying arrangement which ensures complete discharge of material from different types of containers. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counter flange at the outlet of the silo, and a lower flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by a PN10/DN100 flange connection Working pressure Max. 300 kpa Temperature Max. 130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. Range of use As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for this type is 3,0m. Accessories Air control valve equipment consisting of electric-pneumatic valve connection DN100.
15 SFK TS Fluidization cone SFK Fluidization cone with double connection 250 outlets. Yeilds more space below for addiotional components. 2 outlet flanges conn. DN250/PN10 Cone Air divider Air inlet 2"
16 SFK TS Function The fluidized cone ensures that the bulk goods remain running and easy to handle by adding a sufficient amount of air to the material. Fluidizing of the bulk goods takes place by means of a cushion consisting of hard-wearing artificial fiber cloth. Compressed air is supplied to the cushion through a feed pipe and is evenly distributed over the whole surface of the cushion. After passing through the cushion the high quality and finely atomized air forces its way up through the bulk material, thereby effectively fluidizing it. Adhesion between the particles is eliminated and the flow characteristics are greatly improved. Construction The fluidized cone consists of a conical double bottom made of welded steel plate. It is provided with an upper flange for connection to a counter flange at the outlet of the silo, and a lower flange with standard connecting dimensions. The inner bottom consists of a perforated plate on the upper side of which the artificial fiber cloth is fitted. Air supply takes place by connection to a threaded steel pipe DN50. Working pressure Max. 300 kpa Temperature Max. 130 C with standard fluidizing cloth. Max. 200 C with special fluidizing cloth. Range of use As a guide for determining the relationship between the silo diameter and size of the fluidized cone, a suitable silo diameter for this type is m. Accessories Air control valve equipment consisting of slide valve for regulating the necessary air volume and on - off valve controlled by solenoid valve.
17 COUNTER FLANGE Fluidization cone SFK2-600 TS Counter flange for fluidization cone SFK x M 16 t = 20 Ø 600 HC Ø 660 Ø 700
18 COUNTER FLANGE Fluidization cone SFK2-800 TS Counter flange for fluidization cone SFK x M 16 t = 25 Ø 808 HC Ø 877 Ø 910
19 COUNTER FLANGE Fluidization cone SFK TS Counter flange for fluidization cone SFK x M 16 t = 25 Ø 1190 HC Ø 1260 Ø 1295
20 FLUIDPAD TS Fluidpad Airflow out Vibration Material flow Ø22mm hole Airflow in
EXTRACTAVATOR PRODUCT CATALOG ADAPTIVE MIXING TECHNOLOGY
PRODUCT CATALOG ADAPTIVE MIXING TECHNOLOGY OUR EXPERTISE: BULK HANDLING MIXSYS is the partner of many companies in various fields. We know that each business area requires specific needs and our expertise
About Pre-Separators. When a Pre-Separator is to be used the following should be considered: Pre-Separators should be used: Dustcontrol Pre-Separators
Pre-Separators When large quantities of material are to be separated, it is advisable to use a pre-separator. The pre-separator can be placed at the workplace or in conjunction with the central unit. 49
Materials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
Figure 1.1. From left to right: PVC, GRP and AISI 316L. Filter type Filter body material Max pressure Max temperature BSP PVC 150 psig 104 F, 40 C
1. The filter body The filter bodies come in three different materials: PVC (PolyVinyl Chloride), AISI 316L (stainless steel) and GRP (Glass-fiber Reinforced Polyester). Filter bodies in PVC and GRP have
About Vacuum Producers
Vacuum Producers About Vacuum Producers The heart of the system The vacuum producer is the heart of the system. Here the negative pressure is created that drives the system. In Dustcontrol extraction systems,
barmesapumps.com VERTICAL MULTI-STAGE PUMP PERFORMANCE CURVE NOMENCLATURE B M V
VERTICAL MULTI-STAGE PUMP The BMV pump is designed to handle neutral clean liquids. It is a multifunctional product designed to transfer and boost water from various sources. The BMV pump is also designed
About Dustcontrol Filter Units
An extraction system should always be equipped with a filter unit. The filter unit separates coarse material in the cyclone body of the unit and fine dust in an internal arrangement of conical pleated
YARWAY NARVIK MODEL 33/43 STANDARD DUTY QUE-TEMP DESUPERHEATER
Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
Standard Duty Que - Temp Desuperheater Model: 33 / 43
Model: 33 / 43 Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp
R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition
with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,
FlexPAK 800 DX. The leading extraction solution. Always the right capacity.
The leading extraction solution. Always the right capacity. The FlexPAK DX high vacuum unit represents the foremost solution on the market. The unit is designed for the extraction of welding fumes, grinding
Industrial automatic self-cleaning filters made in stainless steel AISI 316
Industrial automatic self-cleaning filters made in stainless steel AISI 316 FilBlue Introduction The automatic industrial selfcleaning filters are designed to remove all suspended solids from surface water
Heavy Duty Que - Temp Desuperheater Model: 13 / 23
Narvik covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry and
Installation and Setting-Up Instructions
Man.rev.1 Installation and Setting-Up Instructions Contents : 1 TECHNICAL DATA 2 CONSTRUCTION AND OPERATION 3 INSTALLATION 4 SETTING-UP 5 MAINTENANCE DOCUMENTS Technical Specifications : G345 Installation
VERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
SEMPELL TURBINE BYPASS VALVE MODEL 115 CHP
A range of high pressure turbine bypass valves that provide greater reliability under extreme conditions. FEATURES Pressure reduction by multi-stage controlled expansion Atomizing steam desuperheater,
Differential pressure controller with flow limitation and with integrated control valve (PN 16) AHPBM-F flow mounting, fixed setting
Data sheet Differential pressure controller with flow limitation and with integrated control valve (PN 16) AHPBM-F flow mounting, fixed setting Description The controller has a control valve with adjustable
YARWAY NARVIK MODEL 88 SPID SMALL PIPE INLINE DESUPERHEATER
A wide range of desuperheaters, pneumatic actuators, strainers to satisfy all specifications of the power, pulp and paper industry and process gas applications FEATURES Fabricated construction Special
VSR BLASTER air cannons for pneumatic activation of bulk materials in silos and processing plants
VSR BLASTER air cannons for pneumatic activation of bulk materials in silos and processing plants VSR BLASTER air cannons Filling: Compressed air is supplied to the quick exhaust valve through a small
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
Fk 41.63(4)GB. NAF-Pocket valve
NAF-Pocket valve DN 80-200, Size 3-8 PN 10-40, ANSI Class 150-300 Fk 41.63(4)GB 05.05 Primary characteristics NAF-Pocket valve is an emptying valve that seperates contaminations with a high safety from
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
ACOUSTIC CLEANING SYSTEMS. Information Brochure.
ACOUSTIC CLEANING SYSTEMS Information Brochure www.aw-akustik.de Introduction to acoustic cleaning The operation principle of acoustic cleaning is based on high-energy sound waves generating pressure differences
Syntron Pneumatic Vibrators
Pneumatic Vibrators Syntron Pneumatic Vibrators Syntron Material Handling offers two types of Syntron Pneumatic Vibrators turbine and piston. Turbine models feature rotary action designed to keep noise
The machine has been overhauled in 2016
ZENO hammer mill Type ZHM 1000/2000 x 700 Constructed in 2002 Drive power 200 kw The machine has been overhauled in 2016 Technical specifications Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH,
EVAC Commercial Marine Equipment TOILET TECHNICAL DATA EVAC 90, STAINLESS STEEL, FLOOR MODEL, *SHOCK TESTED. Fresh water.
16 Apr 2009 Doc. 1:141J TECHNICAL DATA 5327002 EVAC 90, STAINLESS STEEL, FLOOR MODEL, *SHOCK TESTED Fresh water connection Shut-off valve Strainer Vacuum breaker 390 Gasket Seat and cover Pneumatic push
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
Standard Duty A.T.S.A. - Temp Desuperheater Model 24 / 34
Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry
Filter module AF Features. MAHLE Industrialfiltration is now Filtration Group. For more information, visit
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Filter module AF 43 Nominal pressure 16 bar, nominal temperature 180 C; nominal width DN 80 to DN
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
VSR BLASTER air cannons for pneumatic activation of bulk materials in silos and processing plants
VSR BLASTER air cannons for pneumatic activation of bulk materials in silos and processing plants 1 VSR BLASTER air cannons Applications VSR BLASTER Air cannons is widely used for removal of blockages
GENO -MX 1" - MX DN 100 backwash filter. Intended use. Scope of supply. Function. Structure
Subject to modifications TD2-AM001en_004 Edition June 2017 GENO -MX 1" - MX DN 100 backwash filter Intended use The GENO -MXA backwash filters are suitable for the following sectors: Filtration of drinking
Flow controller with integrated control valve (PN 16) AHQM return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16) AHQM return and flow mounting Description DN 15-32 DN 40, 50 DN 50-100 DN 125 DN 150 DN 200, 250 AHQM is a self-acting flow controller with
Table of contents. Attachments, accessories 161
Table of contents Attachments, accessories 6 Product overview Mounting kits for limit switches Mounting kits for proimity switches ocking devices Actuators Detents andles 60 6 Mounting kits for limit switches
Data Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
Flow controller with integrated control valve (PN 16) AVQM - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16) AVQM - return and flow mounting Description The controller has a control valve with adjustable flow restrictor, connection neck for electrical
3. Fuel System FUEL SYSTEM FUEL INJECTION (FUEL SYSTEM) A: GENERAL. FU(STi)-7
W1860BE.book Page 7 Tuesday, January 28, 2003 11:01 PM 3. Fuel System A: GENERAL The fuel pressurized by the fuel tank inside pump is delivered to each fuel injector by way of the fuel pipe and fuel filter.
General Accessories High Vaccuum units. Vaccuum units
Product name General Accessories High Vaccuum units www.nederman.com 1 06-09-2018 www.nederman.com 2 06-09-2018 Filter bag S50 (polyest/teflon) 43110100 Filter bag S200 polyester/teflon 43110300 Cartrigde
Data sheet Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting
Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: - AMV 150 1) - AMV(E)
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
YARWAY NARVIK MODEL 60/70 STANDARD DUTY SLN-TEMP DESUPERHEATER
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
Safety & Shut-off Blocks
Safety & Shut-off Blocks Description HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic
Operating Instructions
Operating Instructions For ABO Butterfly Valves, Series 3 E DN150-400 1. Introduction 2. Safety Instructions 3. Valve Model 4. Transportation and Storage 5. Installation into Piping 6. Pipe Pressure Test
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
Optional Nozzles for Versa-Spray and Versa-Spray II Guns
Instruction Sheet P/N 079A Optional Nozzles for Versa-Spray and Versa-Spray II Guns Description A wide variety of nozzles are available for Versa-Spray and Versa-Spray II powder spray guns. Manual and
MAHLE Automatic Filter Series R8-30W
MAHLE Automatic Filter Series R8-30W With internal pressure segment cleaning, rated pressure to 150 psi Connection Sizes: ANSI 8" to ANSI 20", welded design 1. Features Powerful, fully automatic filtration
Valve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
Check Valves DN PN 80, 100, 160
47 DN 300-1000 PN 80, 100, 160 Designed to automatically prevent back flow of working medium, when transmitting non-aggressive natural gas and other non-aggressive media at the temperature ranged -60 C
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
ELECTRONIC CONE WINDING MACHINE FOR CONTINUOUS BULKING AND SHRINKAGE MOD. VA-2
ELECTRONIC CONE WINDING MACHINE FOR CONTINUOUS BULKING AND SHRINKAGE MOD. VA-2 Designed for continuous bulking and shrinkage ELECTRONIC CONE WINDING MACHINE mod. VA-2 Designed for continuous bulking and
solids solutions group
Pneumatic dense phase conveying by a push conveying process with high load and slow conveying speed for gentle conveying. Hygienic-Dry Design according to EHEDG-Guidelines for dry processes with dry cleaning,
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
Installation and Setting-Up Instructions Spare Parts List
Man.rev.2 Installation and Setting-Up Instructions Spare Parts List Contents : TECHNICAL DATA 2 CONSTRUCTION AND OPERATION 3 INSTALLATION 4 SETTING-UP 5 MAINTENANCE DOCUMENTS Technical Specifications :
BULK SOLIDS FEEDING. Distributor of. Rotary Valve RV RVR RVR
BULK SOLIDS FEEDING Distributor of Rotary Valve RV RVR RV RVR Rotary Valve RV RVR High filling efficiency and precise metering in gravity feeding and pneumatic conveying of products in powder and granules.
Product Sheet Pre-Fabricated Flushing Bypass Assembly for Plant Applications Hero Plant DN15-150
Product Sheet Pre-Fabricated Flushing Bypass Assembly for Plant Applications Hero Plant DN15-150 Description Hero Plant is a pre-fabricated, flushing bypass arrangement for balance, control, isolation,
Metso High Consistency Sampler Metso Nove H. Installation & Owner s Manual K10196 V1.1 EN
Metso Nove H Installation & Owner s Manual K10196 V1.1 EN Table of contents Warnings & safety information 3. Actions during operation 19 Recycling and disposal 1. Introduction 7 1.1. General description...7
AVQMT. AVQT controller can be combined with AVT or STM thermostatic actuators.
Data sheet Flow and temperature controller with / without integrated control valve (PN 25) AVQT - flow and temperature controller AVQMT - flow and temperature controller with integrated control valve Description
Flow controller with integrated control valve (PN 16) AHQM - return and flow mounting
Flow controller with integrated control valve (PN 16) AHQM - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: DN 15-32 with - AMV(E) 10 - AMV(E) 13
NARVIK-YARWAY. Heavy Duty A.T. - Temp Desuperheater Model: 18/54 and 28/64
NARVIK-YARWAY Narvik-Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp &
GVK Series (Steam-to-Steam) Clean Steam Generators
Page 1 of 5 TI-P486-03 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 GVK Series (Steam-to-Steam) Clean Steam Generators Description Unfired clean steam generators with 'U' type extractable tube bundle and
Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25)
Data sheet Temperature controller AVT with safety temperature monitor STM / VGS for steam (PN 25) Description Controller closes on rising temperature. The controllers are: - Type-tested acc. to EN 14597
Rotary blade level indicators Level limit switches for bulk goods. Accessories
Storm tape Weather protection hood for outdoor use as protection against overheating in the case of strong radiation from the sun. -SH Weather protection hood with storm tape... 8,-- Material PVC, RAL
SUBMERSIBLE PUMPS EFFLUENT DISPOSAL RANGE 4 poles - 50 Hz
operating limits Flow rates up to: m 3 /h Head up to: m CL Range of temperature of the liquid: +3 to C* Density of the liquid:,5 max. ph of the liquid: 3- Maximum immersion: Maximum particle size: m Ø
Bin Activators. Bin Activators. Bin Unloaders PLBB (LVT) Posibin MLB Live Bin Self Standing Static Bin/Hopper
in ctivators Standard in ctivator Sanitary in ctivator Pre-Steamer in ctivator LVT in ctivator in ctivators Posibins & ins Portable (IC) P Posibin in Unloaders PL (LVT) Posibin ML Live in Self Standing
T EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
The pumping action of the B series lobe displacement pump is achieved thanks to the counter-rotation of
INDUSTRY APPLICATION Rotary lobe pumps type B are positive displacement pumps for liquids of any viscosity with lubricating and non-lubricating properties. Lobe pumps are used in the chemical, pharmaceutical
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
YARWAY NARVIK STANDARD DUTY A.T.-TEMP DESUPERHEATER MODEL 38/48
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
5. Combustion of liquid fuels. 5.1 Atomization of fuel
5. Combustion of liquid fuels 5.1 Atomization of fuel iquid fuels such as gasoline, diesel, fuel oil light, fuel oil heavy or kerosene have to be atomized and well mixed with the combustion air before
VFC-5 to VFC-500 FLO-COATER
VFC-5 to VFC-500 FLO-COATER OPERATION INSTRUCTIONS Page -1- CONTENTS PAGE NUMBER System Description... 2 Flo-Coater Description... 4 Operation of a Flo-Coater... 8 Selective Operator Control... 9 Operating
Filtration and separation technology. Lenzing OptiFil Automatic backwash filter
Filtration and separation technology Lenzing OptiFil Automatic backwash filter Lenzing OptiFil 3 Lenzing OptiFil Automatic backwash filter filtration down to 1 µm OptiFil is a fully automatic, continuous
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
DISAB P 210/ ADR
DISAB P 210/9-1513 ADR P 210/9-1513 ADR shown above is equipped with options. This vacuum loader is designed and built in compliance with applicable ADR regulations and handles material of a consistency
AERZEN BULK VEHICLE BLOWER
AERZEN BULK VEHICLE BLOWER A E R Z E N E R M A S C H I N E N F A B R I K GMBH G1-071 05 EN 250 11.2012 Fields of application and principle of operation Aerzen bulk vehicle blowers have been specifically
BKV 4000 Bottom Blowdown Control Valve Installation and Operating Instructions
BKV 4000 Bottom Blowdown Control Valve Installation and Operating Instructions BKV 4000 MKK v10.01-en 1 CONTENTS 1. SAFETY INFORMATIONS... 3 2. DESCRIPTION... 3 3. TECHNICAL SPECIFICATIONS... 4 3.1. BKV
Profluid and Gap-type tube filters. Automatic filters
and Gap-type tube filters Automatic filters and Gap-type tube filters the efficient answer for multi-purpose applications Identical technology two different cleaning principles Automatic filters such as
YOUR GLOBAL FLOW CONTROL PARTNER. BRAY/MCCANNALOK EN High Performance Butterfly Valve Operation and Maintenance Manual
YOUR GLOBAL FLOW CONTROL PARTNER BRAY/MCCANNALOK EN High Performance Butterfly Valve TABLE OF CONTENTS 1.0 Definition of Terms....................................... 2 2.0 Introduction...........................................
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Application. Key Features. Specifications
Application The Hopper Outlet Control Valve s primarily purpose is for the controlled release of cemented paste or hydraulic fill out of the batching plant hopper in gravity feed systems so that initial
Yarway Narvik Desuperheater Model 18/54 and 28/64 Heavy Duty
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide of models, sizes and materials to satisfy the specifications of the power, pulp and paper industries along with
Standard Duty SLN - Temp Desuperheater Model: 50 / 60
Narvik-Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp & paper industry
Learning System for Automation and Communications. Electropneumatics. Workbook Basic Level S1 K1 K1 Y1
Learning System for Automation and Communications Electropneumatics Workbook Basic Level 1 2 3 S1 K1 K1 S2 K1 094005 Order no. 094005 Description: TEACHW.E-PNEUM. Designation: D.S201-C-GB Edition: 08/1993
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY RANGE OF ACCESSORIES COMPETENCE CENTRE INDUSTRIAL VACUUMING. Valid from
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY Valid from 01.01.2019 COMPETENCE CENTRE INDUSTRIAL VACUUMING 2 3 DEAR CUSTOMER, This catalogue provides you with an essential selection of the
The JET Filter. Scope of Delivery. patented. The New Definition of Purity for Your Medium. Our Filter Systems Protect
GB JET Filter The New Definition of Purity for Your Medium Our Filter Systems Protect The JET Filter Cooling Water River Water Plate Heat Exchangers Spray Nozzles Sea Water Sinter and Scale Separation
Security device Non return valve
Non return valve Design The DEFINOX non-return valve is made of 316L stainless steel with a surface finish of Ra = 0.8 µm. To disassemble, a fitting is required upstream. This valve uses a guided plug
INSTRUCTION MANUAL SVEA-ALLROUND GRAIN AUGER 152 mm
INSTRUCTION MANUAL SVEA-ALLROUND GRAIN AUGER 152 mm Original User Guide Subject to alteration Sveaagri AB Vingåkersvägen 73, SE-641 39 Katrineholm TEL +46(0)150 48 77 00, FAX +46(0)150 48 77 77 www.sveaagri.com
Triple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
PKL Pneumatic Impactors
Copenhagen Vibrator Products PKL Pneumatic Impactors High impact power Low energy consumption Supreme silo emptying Rubber hammer effect option Automatic self-control option High temperature option Available
50 HERTZ METRIC BLOWER
CAPACITIES 50 HERTZ METRIC BLOWER Pressure Range 500mm 20 wc 12 osi 700mm 27 wc 16 osi 900mm 35 wc 20 osi 1100mm 43 wc 24 osi Model Number TBA 500-1.5 TBA 500-2.2 TBA 500-3 TBA 500-4 TBA 500-5.5 TBA 500-
everything under control... FABRICATED DIVERTER VALVES
everything under control... FABRICATED DIVERTER VALVES INTRODUCTION Gravity Feed Diverter Valves are used in the bulk handling field to re-route powders, pellets or granular materials from one discharge
ANDREAE FILTERS. VISECO GmbH FUNCTION OF THE ANDREAE FILTERS
FUNCTION OF THE Filtering is not necessary only separation of mobile colour particles by an air flow with the help of one row from ever more finely becoming mesh seven. The ANDREAE FILTER functions after
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
K - Flow Meter with Float
K - Flow Meter with Float Doc. no.: 18, en_cat_k, 12/2014, rev. 1 Application All-metal flow meters with float type K are used for signaling and measuring of instant flow, flowed volume of liquid and fluent
Tubular Screw Conveyor Capacity: Objectives:
T Tubular Screw Conveyor Capacity: Objectives: I Manufacturing: Helical blades welded onto the central tube Inlet/outlet opening: Maximum slope: Engine: Length: ATEX zone 20/22 Power: Transmission type:
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Level limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
(3) (4) (6) (5) (10) (9) (8) (7)
3. Fuel System A: GENERAL The fuel pressurized by the fuel tank inside pump is delivered to each fuel injector by way of the fuel pipe and fuel filter. Fuel injection pressure is regulated to an optimum
FLOW TEK VALVES & CONTROL S INC
FLOW TEK VALVES & CONTROL S INC e-mail:- info@flowagevalves.com PLOT NO-172,173, ROAD NO-4, KATHWADA, G.I.D.C. AHMEDABAD. PHONE NO:- 079-22900219,22900220, MOBILE:-09824539702, 9824080899. an ISO 9001