500kg/h Laundry/ Facial/Body Soap Line REFER TO BACK PAGE FOR PRICES 500kg/h Laundry/ Toilet soap finishing Line
|
|
- Carol Waters
- 5 years ago
- Views:
Transcription
1 REFER TO BACK PAGE FOR PRICES 500kg/h Laundry/ Toilet soap finishing Line FREE Business Management Installation/Training Course T&C s apply SEE VIDEO ON SOAP LINE Visit
2 500kg/h Laundry/ Toilet soap finishing Line price Key Name Type Qty 1 Mixer with two Z-shaped agitators Z Three-roll mill 500-SG9 1 Simplex single-worm refiner 500-DRD 1 Duplex single-worm plodder 500-DRVP 1 5 Electrical cutter with engraving system 2000ES-QKI 1 6 Set of belt conveyors for the line 500ES Water Chiller AC-5 1
3 Key Name Type Specification 1 Mixer with Two Z-Shaped Agitator Z Rated capacity: 100 to 125 kg/batch (soap noodles) Two Z-shaped sigma agitators Diameter of the agitator is 350 mm, inclination angle 60º. Motor: kw Speed: Agitator A 22 r/min Agitator B 36 r/min Pressure of compressed air: 0.4 MPa Consumption of compressed air: 0.5 m 3 /min All parts in contact with soap are in stainless steel 304. Two discharge gates are with their own air cylinder to open/close the gate. 500-SG9 2 Three-Roll Mill Roll diameter: 260 mm Roll working length: 675mm Motor: 11 kw Speed: Slow roll 15 r/min Intermediate roll 45 r/min Fast roll 135 r/min The output will be 500 kg/h when the gap between slow roll and medium roll is 0.2 mm, and that between medium roll and fast roll is 0.1 mm. Gears are made from modular cast iron.
4 3 500-DRD Capacity: 500 kg/h min. Worm diameter: 200 mm Motor: 11kW Speed of upper extruder: 18 r/min; The worm has a changing pitch and changing-depth, and is welded from Al-Mg alloy steel. The clearance between worm and barrel is 0.75 mm max. measured at one side of the worm. High-precision, i.e., Class 6, gears with case-hardened and ground teeth are for gear reducers. The bush is self-lubricating, wear-resist, and can work under high pressure. All parts in contact with soap are in stainless steel 304.
5 4 Duplex Single-Worm Plodder Capacity: 500 kg/h min.; Worm diameter: 200 mm Motor: 11kW+11 kw Speed of upper extruder: 18 r/min; Speed of lower extruder: 5 to 18 r/min adjustable; The conical outlet head has 1.5 kw electric heating that is automatically controlled to keep a proper temperature inside. Barrels are from seamless stainless steel tubes. That makes the barrel stronger, creating higher extruding pressure. The worm has a changing pitch and changing-depth, and is welded from Al-Mg alloy steel. The worm is high in strength, light in weight. The clearance between worm and barrel is 0.75 mm max. measured at one side of the worm. Vacuum pump is not including High-precision, i.e., Class 6, gears with case-hardened and ground teeth are for gear reducers. The bush is self-lubricating, wear-resist, and can work under high pressure. All parts in contact with soap are in stainless steel 304.
6 2000ES-QKI 5 Cutter The capacity of the cutter is 2000 kg/h min. Speed: stroke/min; Cutting length: mm Cutting width: 120 mm max. Servomotor: 2.9 kw Conveyor motor: 0.55 kw The cam is made from alloy steel Cr-Mo-Al carburized, case hardened and quenched, working at low noise and in high precision. Super-high hardness LC9 is used for cutting mechanism, light in weight and durable for service. Major parts of the cutting mechanism are from aviation alloyed aluminum, light in weight and high in strength.
7 500ES Set of Belt Conveyors for the Line Linear speed 30 m/min. The Perspex glass hood is provided for preventing dust from coming onto the soap noodles. The conveyor has measures to prevent soap noodles from falling out the conveyor. The conveyor has a guiding fin under the belt to prevent the belt from running out of its normal track. All parts in contact with soap are in stainless steel 304 AC-5 7 Water Chiller Cooling water Temperature: 5-35 Refrigeration Capacity: 11420Kcal/h (equivalent to kw) Compressor motor: 4.55 kw Refrigerant: R22 Water pump motor: 0.75 kw Lift: 20 m
8 SFDB SFDA 8 Packaging The soap bars will be wrapped on machine. Max. film width: 450 mm Speed: piece/min Length of pack: mm Pack width: mm Pack height: 5-60 mm Total installed power: 3.6 kw 450/120
9 PRICE LIST Date: Prices subject to change All prices Excl. VAT 10/04/ Kg/h Laundry Soap line R ,00 $ ,00
SJSZ 80/173 Foam Board Extrusion Line
Date: Jan. 27, 2018 SJSZ 80/173 Foam Board Extrusion Line 1. Equipment List&Price Item Description Unit Price Qty (USD) (Set) 1 SJSZ 80/173 Double Screw Extruder 1 Total Price (USD) 2 Mould - - - 3 Mould
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationCommercial Sewage & Waste Water Systems
Commercial Sewage & Waste Water Systems EDP-4 72 Gallon 24 x 36 Basin EDP-6 108 Gallon 30 x 36 Basin EDP-8 158 Gallon 36 x 36 Basin 1/2 HP pump 2 PVC Sch 80 discharge, 3 float switches and cover 2 NPT,
More informationWith over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
More informationSIMOTICS Frei verwendbar / Siemens AG Alle Rechte vorbehalten.
The most comprehensive range of motors SIMOTICS SIMOTICS portfolio Motors SIMOTICS Low voltage motors for line and inverter operation Motors for motion control application DC motors High-voltage Motors
More informationTaper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B
T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex
More informationGIRTH GEARS AND PINIONS OVERVIEW
GIRTH GEARS AND PINIONS OVERVIEW Girth Gears & Pinions Tubular mills and rotary kiln operations are the life support system for the processing industries, and necessitates reliable and uninterrupted operations.
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code/Name: ME 1352 DESIGN OF TRANSMISSION SYSTEMS Year/Sem: III / VI UNIT-I (Design of transmission systems for flexible
More informationTRITOTUTTO SERIE S WORKING AND MAIN FEATURES. Loading unit Hopper (1).
4-SHAFTS shredders TRITOTUTTO SERIE S WORKING AND MAIN FEATURES Loading unit Hopper (1). Shredding unit 4 shafts with sharp elements constituted by sharpcorners disks (3) provided with hooks (2) Every
More informationindex Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8
pv-belts index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8 Drive calculation procedure 9 Table 8: performance
More informationROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationIronHorse Cast-Iron Worm Gearboxes 2 2 Gearbox Selection Factors 2 2. Service Factors and K Factors 2 2
Cast-Iron Worm Gearboxes Chapter 2 Table of Contents IronHorse Cast-Iron Worm Gearboxes 2 2 Gearbox Selection Factors 2 2 Service Factors and K Factors 2 2 IronHorse Cast-Iron Worm Gearbox Specifications
More informationJanuary /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationWhat's Inside A Ranger NextGen Tire Changer
What's Inside A Ranger NextGen Tire Changer NextGen tire changers feature high-torque electric turntable drives. Increased speed and reversible direction for quicker tire removal and installation. The
More informationMASTER SPECIFICATION XL RIGHT ANGLE GEARING XL PARALLEL GEARING
SPECIFICATION XL RIGHT ANGLE GEARING The speed reducer shall be suitable for integral gearmotor construction, readily adaptable for C-face mounting, in either integrally cast feet, output flange, multi-mount,
More informationGEARBOXES. Gearboxes. Gearboxes. Gearbox is a mechanical device utilized to increase the output torque or change
GEARBOXES Gearboxes Gearboxes Gearbox is a mechanical device utilized to increase the output torque or change the speed of a motor. The motor's shaft is attached to one end of the gearbox and through the
More information127mm ~ 273mm Seamless Tube Production Plant
ES-11223 127mm ~ 273mm Seamless Tube Production Plant Information about an exclusive method of pipe making Availability of equipment at the pipe rolling area in the manufacturing sequence of their production
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More information2-component PU foam dispensing machine
2-component PU foam dispensing machine We would like to represent the technology and equipment for dosing, mixing and further automatic applying of the 2-component polyurethane foam, used for the doors
More informationL Jaw Type Couplings. Coupling Selection Example
Coupling Selection Example A coupling is required to drive a pulp grinder from a 0 RPM, 20HP, 26TC motor approximately 6 hours per day. Motor shaft is 8 diameter with a 8 key and grinder shaft is 8 diameter
More informationDEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationGEAR GENERATION GEAR FORMING. Vipin K. Sharma
GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.
More informationConstruct Compressed Air Building Near Bldg SECTION OVERHEAD COILING DOORS 07/07
SECTION 08 33 23 OVERHEAD COILING DOORS 07/07 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationCONTENTS Sprockets for Roller Chain
CONTENTS Sprockets for Roller Chain Features/enefits.................................................... PT14-2 Specification: TAPER-LOCK, A, #35 Pitch......................................................
More informationPeerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc.
Peerless Pump FULL PRODUCT LINE Sterling Fluid Systems (USA), Inc. Brochure B-1270 Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid
More informationProducts Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
More informationAxial and Mixed Flow Pumps for Large Volume Pumping
Vertical Industrial and Process Vertical close coupled single or multi-stage turbine pumps. Axial and Mixed Flow for Large Volume Pumping Vertical pumps for handling water in large volumes. Mixed flow
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationChain Drives. Chain Drives
08 Chain Drives Chain Drives 166 Renold Roller Chains Synergy BS Roller Chain - Duplex Synergy BS Roller Chain - Simplex Renold No. ISO No. Pitch inch A Pitch mm A Inside Width B Roller diam C 116038
More informationTECHNICAL SPECIFICATION OF 10 INCH CUTTER SUCTION DREDGER
1 TECHNICAL SPECIFICATION OF 10 INCH CUTTER SUCTION DREDGER Ser Description Required Specification Remarks China Qingzhou JuLong ISO Certified A Manufacturer Dredging & Mining Enterprise Machinery Co.,
More informationCross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks
Cross Tensioners Cross Tensioners provide constant belt or chain tension. Their automatic tensioning action translates into improved performance and extended life for most types of fixed-centre drives.
More informationRECYCLE TYRES,PLASTIC & USED OIL CONVERTER TO DIESEL/ FUEL
RECYCLE TYRES,PLASTIC & USED OIL CONVERTER TO DIESEL/ FUEL FEATURED MACHINES IN THIS INFO PACK BALING MACHINES GLASS CRUSHING MACHINES & FLORESCENT TUBE CRUSHER BUSINESS OPPORTUNITY MACHINES. SOLUTIONS
More informationCorporation. New & Used Machinery
ES ESteel Corporation. New & Used Machinery #101, 576-8, E-Dong, Sangrok-Gu, Ansan-City, Gyeonggi Provence, South Korea Tel : +82 31 407 1144 FAX : +82 31 407 1157 http://www.esteelcorp.com e-mail : machinery@esteelcorp.com
More informationPowerful Design For Tough Applications
Powerful Design For Tough Applications Conair's Viper Granulator 17-Series granulators are versatile, rugged and designed for central or machine-side recycling of tough, injection molded parts; bulky blow-molded
More informationSeries LS16K Hydraulic Cable Winches
Series LS16K Hydraulic Cable Winches Lift-Safe hydraulic winches are specifically designed for lifting applications and optimum load control. Engineered for enhanced safety with redundant braking systems,
More information4 Fenner Torque Drive Plus 3
Fenner Torque Drive Plus 3 offers; State of the art power ratings. Compact drive package - reduced weight. Quiet operation. Accuracy of positioning. Anti-static as standard. Runs on standard HTD pulleys.
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationchain sprocket SIMPLEX DUPLEX TRIPLEX
chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain
More informationAir Finishing Tools CP778. Heavy Duty Hi-Speed Sander
Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.
More informationValley Drive Train RELIABLE DURABLE PRECISE ADVANCED RESPONSIVE
Valley Train RELIABLE DURABLE PRECISE ADVANCED RESPONSIVE Valley Gearbox Large capacity rubber diaphragm expands with heat and pressure to minimize water condensation. Expansion chamber cap made of corrosion
More informationPRODUCT MANUAL TYRE-FLEX COUPLING (T,TO & RST)
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA PRODUCT MANUAL TYRE-FLEX COUPLING (T,TO & RST) R-PM-T-1/3-1/14 Page 1 INDEX CONTENTS PAGE Standard Features 3 At a Glance 3 TYRE-FLEX Family 3 Elastomer Information
More informationMEYER MATE 9.0 CU FT. SPREADER
MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry
More informationPM-465. Cold Planer. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79" Maximum Cutting Depth 305 mm 12"
PM-465 Cold Planer Machine shown may have optional equipment. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79" Maximum Cutting Depth 305 mm 12" PM-465 Cold Planer
More informationSelection Procedure, Example... PT13-16 Basic Horsepower Ratings... PT13-20
CONTENTS Sprockets for Roller Chain V-Drives Features/Benefits.......................................... PT13-2 Specification: TAPER-LOCK, A, B #35 Pitch...............................................
More informationGearbox standard series Your industrial Gearboxes. Standard Industrial NH/NHK
www.gamesagearbox.com Standard Industrial 1 Contents Gear Design and Construction 3 Service Factors 5 Example of Selection 7 Spur Gearboxes NH I 8 NH II, NHS II, NHZ I2 NH III, NHS III, NHZ II7 NH IV,
More informationChain Drives. Pitch. Basic Types -There are six major types of power-
1 2 Power transmission chains have two things in common; side bars or link plates, and pin and bushing joints. The chain articulates at each joint to operate around a toothed sprocket. The pitch of the
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationViking In-Line Helical Gear Reducers
Page 615.1 Gear Ratio Range: (varies by reducer size) Output Speeds (with 1750 rpm input) Reducer Horsepower Range: From 2.63:1 to 38.0:1 (Varies by reducer size) 46 665 rpm.5 HP (.37 kw) to 350 HP (261
More informationPVBELTSHANDBOOK2 22/6/07 10:14 Página 3 M D
M D M D 4 INDEX TABLE OF CONTENTS MEGADYNE PV BELTS MEGADYNE PV BELTS 6 BELT FEATURES 7 PV BELT STRUCTURE 7 BELT CROSS SECTIONS AND DIMENSIONS 8 STANDARD BELT & PULLEY RANGE 10 SYMBOLS, UNITS, TERMS 13
More informationTetra Pak Extrusion Tunnel A3 Tray tunnel system for ice cream extrusion
Tetra Pak Extrusion Tunnel A3 Tray tunnel system for ice cream extrusion Application Application for extrusion, shaping, filling, decorating and hardening of ice cream. Examples of product types: ball
More informationL-Jaw Elastomeric Couplings
L-Jaw Elastomeric Couplings F3 100% interchangeable with industry standard 3 Insert materials available 3 Hub materials available Large selection of sizes P-1686-TBW 4/16... TB Wood s 888-829-6637 F3-1
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More informationTrenchers for Drainage works
Main Technical Specifications s for Drainage works MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 775DT 5 hp (168 kw) Caterpillar C6.6 ACERT 34,171-55,000 lbs (15.500-24.947
More informationMASTER SPECIFICATION XL RIGHT ANGLE GEARING XL PARALLEL GEARING
SPECIFICATION XL RIGHT ANGLE GEARING The speed reducer shall be suitable for integral gearmotor construction, readily adaptable for C-face mounting, in either integrally cast feet, output flange, multi-mount,
More informationFLEXIBLE JAW COUPLINGS
To order this part, call Lifco Hydraulics USA Toll Free at -800-92-849 Jaw Type Couplings USA Standard The Jaw Type Couplings from Vescor are offered in the industry s largest variety of stock bore/keyway
More informationVANTIX Series Optimized Technology
VANTIX Optimized Technology 63, Annam-ro 402beon-gil, Bupyeong-gu, Incheon, Korea zip.21314 Tel : +82-32-508-1281~1282 Fax : +82-32-508-1289 www.sjpmt.com Brand for customer oriented optimized pharmaceutical
More informationVan der Graaf Power Transmission Equipment
Van der Graaf Power Transmission Equipment Benefits What is a Drummotor? Long life span The Van der Graaf Drummotor is a one component conveyor drive which houses all components internally, eliminating
More informationBSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears
Cutting Circular shears / Sheet metal shears New KS 1 - Manual circular shear to cut arcs of a circle in steel up to 1.0 mm KS 2 - Motor-driven circular shear to cut arcs of a circle in steel up to 2.0
More informationThe intelligent stainless steel stock range. Stainless, highly corrosion and heat resistant steels
The intelligent stainless steel stock range Stainless, highly corrosion and heat resistant steels A material grade makes history. Even at the end of the 19th century it was discovered that the corrosion
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationValve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm
Valve Lapping Tool Attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8 mm shank - working speed min. 1000 rpm, max. 1250 rpm - 2
More informationGPC SERIES CROSSFLOW FRP COOLING TOWER
SERIES CROSSFLOW FRP COOLING TOWER DURABLE ENERGY & SPACE SAVING MYDIN SENAWANG BANK NEGARA TERENGGANU HOTEL ISTANA ECONSAVE (VARIOUS OUTLETS) KUALA TERENGGANU SPECIALIST HOSPITAL KOSSAN RUBBER INDUSTRIES
More informationPB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationU.S. TSUBAKI DRIVE CHAINS
DRIVE CHAINS Contents Page ANSI RS ROLLER CHAIN A- ~ A-4 INTRODUCTION A- ~ A-5 RS5 THROUGH RS4 A-6 ~ A-9 HEAVY SERIES A- RS DOUBLE PITCH ROLLER CHAINS A- SELECTION AND ENGINEERING INFORMATION A- ~ A-4
More informationM.H INDUSTRIAL EQUIPMENTS
M.H INDUSTRIAL EQUIPMENTS Tyre Flexible Cushion Coupling Highly flexible & resilient Absorbs Large Misalignment Low Torsional Stiffness Dampens shock & Vibration Flexible element easily replaceable insitu
More informationDRILLING & MOBILE EQUIPMENT
DRILLING & MOBILE EQUIPMENT CHAINANDDRIVES.COM.AU Introduction INTRODUCTION Chain & Drives was established to become a leader in Power Transmission. One of our core sectors is the Drill Rig Industry. We
More informationBT-Series Shaft Mounted Gear Units
BT-Series Shaft Mounted Gear Units The POWERGEAR BT-Series Round Shaft Mounted Gear Unit is a versatile gearbox developed on special demand from our customers worldwide. The speed reducer is compact in
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationdrylin Stainless Steel
drylin Stainless Steel Lubrication-free Temperature-resistant up to +250 C Corrosion-resistant Chemical-resistant Standard parts with short 995 drylin Stainless Steel Machine parts made of are designed
More informationBAJAJ STEEL INDUSTRIES LIMITED
TM BAJAJ STEEL INDUSTRIES LIMITED An ISO 9001-2008, 14001: 2004 & & OHSAS 18001:2007 certified company SINCE 1832 BAJAJ POWER TRANSMISSION PRODUCTS www.bajajngp.com BAJAJ Group Nagpur Bajaj Steel Industries
More informationConfigurable Cutting Chamber For Multiple Applications
Configurable Cutting Chamber For Multiple Applications The innovative and adaptable hardened cutting chamber on the Conair Viper Granulator 12-Series granulators allows these granulators to be configured
More informationSUPER DUTY THE AFFORDABLE SOLUTION 8685 Station Street, P.O. Box 90, Mentor, OH 44061-0090 USA P: +1-440-255-9333 F: +1-440-255-6427 E: solutions@lintern.com www.lintern.com SUPER DUTY CONDENSER TOTAL
More informationTrenchers for Long distance networks installation
Main Technical Specifications s for Long distance networks installation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW DIG DEPTH / DIG WIDTH CHAINSAW DIG DEPTH / DIG WIDTH BUCKET WHEEL DIG DEPTH / DIG WIDTH
More informationPRODUCT MANUAL B-FLEX COUPLING
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA PRODUCT MANUAL B-FLEX COUPLING R-PM-B-01/02-01/14 Page 1 INDEX CONTENTS PAGE Features of B-FLEX Coupling 3 At a glance 3 Components of B-FLEX Coupling 3 How B-FLEX
More informationValley. Drive Train RELIABLE DURABLE PRECISE ADVANCED RESPONSIVE
Valley Drive Train RELIABLE DURABLE PRECISE ADVANCED RESPONSIVE Valley Gearbox Large capacity rubber diaphragm expands with heat and pressure to minimize water condensation. Expansion chamber cap made
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationBEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
More information1900AL Electric Mining Shovel Product Overview
1900AL Electric Mining Shovel Product Overview 1900AL Shovel Taking the Next Step: Building on Proven Success When the P&H 1900AL was introduced in 1977, the result was one of the most rugged, reliable,
More informationTRITOTUTTO SERIE S WORKING AND MAIN FEATURES. Loading unit Hopper (1).
4-SHAFTS shredders TRITOTUTTO SERIE S WORKING AND MAIN FEATURES Loading unit Hopper (1). Shredding unit 4 shafts with sharp elements constituted by sharpcorners disks (3) provided with hooks (2) Every
More informationMAREK Industrial a.s. ** marek.eu ** **170728
VA SERIES HEAVY DUTY VERTICAL CLAMPS Features: All VA series clamps are designed to be adaptable and durable, and to withstand abuse in heavy duty applications. The new VA300 series helps fill the gap
More informationGeneral Specification
General Specification OF NV-100mmSG (Mod.2) Single Screw Extruder Freesia Macross Corporation April 2009 1. Type General purpose single screw extruder 2. Capacity 300-500 kg/h (ABS pellet) 3. Dimension
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationDIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment
DIAMOND ROLLER CHAIN For Agricultural and Construction Equipment FABRICATION While roller chain would appear to be a simple product, the number of components in a ten foot section of 40 pitch chain totals
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationACCURL MASTER GUILLOTINE SHEARS
ACCURL MASTER GUILLOTINE SHEARS MASTER MS SERIES Shaping your future ACCURL MASTER GUILLOTINE SHEARS MASTER MS SERIES Well equipped for precision cuttings (± 0.05 cutting precision) High technology Master
More informationSeries LS10H Hydraulic Cable Winches
Series LS10H Hydraulic Cable Winches Lift-Safe hydraulic winches are specifically designed for lifting applications and optimum load control. Engineered for enhanced safety with redundant braking systems,
More informationElevators & Conveyors
Elevators & Conveyors Commercial Series 1 Your Complete Systems Manufacturer. Series 1 GSI Chain Conveyors Our material handling division can provide you with an extensive line of chain conveyors to meet
More information