Haltech Engine Management Systems Distributed by RPM Sports

Transcription

1 Haltech Engine Management Systems Distributed by RPM Sports 1970 Terminal Loop Rd, McQueeney, TX T: (830) or (210) USA PREMIUM Updated 1st Nov 2014 HALTECH UNIVERSAL ECU KITS S USD Part # D E A M.S.R.P HT Platinum Sprint 500 Autospec Flying Lead Kit Long - 2.5m/8ft HT Platinum Sprint RE Autospec Flying Lead Kit Long - 2.5m/8ft HT Platinum Sport 1000 Autospec Flying Lead Kit Short - 1.2m/4ft HT Platinum Sport 1000 Autospec Flying Lead Kit Long - 2.5m/8ft with NEW 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits HT Platinum Sport 2000 Autospec Flying Lead Kit Short - 1.2m/4ft HT Platinum Sport 2000 Autospec Flying Lead Kit Long - 2.5m/8ft with NEW 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits HT Elite 2500 (DBW) - 1.2m (4 ft) Basic Universal Wiring Harness Kit (no relays or fuses) - (includes USB Software Key and USB programming cable) NEW HT Elite 2500 (DBW) - 2.5m (8 ft) Premium Universal Wiring Harness Kit - with firewall grommet, moulded 6 power circuit Haltech fuse box & lid. Includes 4 relays & 7 fuses. (includes pins for the 2 spare power circuits, USB Software Key and USB programming cable) ECU ACCESSORIES NEW HT Platinum ECU Rail-type mounts and screws - (Pack of 4 suits all silver extrusions) Updated HALTECH UNIVERSAL ECU ONLY HT Platinum Sprint 500 ECU Only (includes CD and USB coms cable) HT Platinum Sprint RE ECU Only (includes CD and USB coms cable) HT Platinum Sport 1000 ECU Only (includes CD and USB coms cable) HT Platinum Sport 2000 ECU Only (includes CD and USB coms cable) HT Elite 2500 (DBW) - ECU Only (includes USB Software Key and USB programming cable) NEW Platinum PRO Direct Plug-in ECU Kits Auxiliary I/O Harness Plug and Pins are now included in all direct plug-in kits HT Platinum Sport Plug-in - GM Kit (suits early GM TBI/TPI with DELCO ECU - Please consult Haltech for further information) HT Platinum PRO Plug-in Nissan R32/33 Skyline Kit (Manual trans only) HT Platinum PRO Plug-in Nissan R34 GT-T Skyline Kit (Manual trans only) HT Platinum PRO Plug-in Nissan R34 (GTR ONLY) Skyline Kit HT Platinum PRO Plug-in Nissan Z32 Fairlady 300ZX Kit (Manual trans only) HT Platinum PRO Plug-in Nissan S15 Silvia/200SX & S14s2, S13 Type-X Kouki 8/96-98 (Manual trans only) HT Platinum PRO Plug-in Nissan Y61 Patrol (TB48) Kit (Manual trans only) HT Platinum PRO Plug-in Nissan Z33 350Z DBW Kit (Does not suit HR Dual Throttle) (Manual trans only) HT Platinum PRO Plug-in Mitsubishi EVO 9 MIVEC Kit HT Platinum PRO Plug-in Honda EP3 (Manual trans only) - also suits DC5 (03-04) HT Platinum PRO Plug-in Honda DC5/RSX Kit ( ) (Non DBW, Manual trans only) HT Platinum PRO Plug-in Honda S2000 AP1 Kit ( & 2005 AP2 Non DBW) HT Platinum PRO Plug-in - Hyundai BK Theta Genesis Kit ( ) (2.0 Turbo Manual trans only) HT Platinum PRO Plug-in - Subaru GDB WRX MY01-05 JDM, USDM, ADM & STI MY01-05 JDM, ADM (EJ20 Non DBW, Manual trans only) Platinum PRO Auxiliary I/O Harness Parts HT Plug and Pins Only - 16 Pin TYCO - Suit PRO/Sport Plug-in Aux harn & TCA Box HT Platinum PRO/Sport Plug-in Auxiliary I/O Harness Only - 2.5m/8ft Platinum Sport 1000 Fully Terminated Engine Harness ECU Kits The fastest and most cost effective way to wire your racecar or engine conversion HT PS1000 Mazda 13B Fully Terminated Harness Kit - Includes flying lead ignition harness. Suits Square Bosch EV1 injector connectors HT PS1000 Mazda 13B Fully Terminated Harness Kit - Includes pre-wired LS1 ignition coil harness. Suits Square Bosch EV1 injector connectors. (LS1 ignition coils are NOT included. Please order 4 x HT if required) HT PS1000 Mazda 13B Fully Terminated Harness Kit - Includes pre-wired HPI4 15AMP 4CH Ignition Module with flying lead ignition harness. Suits Square Bosch EV1 injector connectors. (Ignition coils are NOT included. Please order 4 x HT if required) Platinum Sport 2000 Fully Terminated Engine Harness ECU Kits The fastest and most cost effective way to wire your racecar or engine conversion HT PS2000 FORD Fully Terminated Full Sequential Harness Kit Suits Square Bosch EV1 injector connectors - Includes PS2000 ECU, Engine Harness, & Fuse Block Kit. Full Sequential Injection Pre-wired to connect directly to OEM TFI Module, Includes breakouts for Distributor or Crank Sensor Trigger (Use with OEM TFI Ignition or CDI MSD6, MSD7, Crane, Mallory etc) HT PS2000 Nissan RB30 Single Cam Fully Terminated Harness Kit - Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket. Includes air & coolant temp sensors. (Can be reconfigured to run 6 indiviudal ignition coils using HT ) HT PS2000 Nissan RB30 6 Channel Flying Lead Ignition Harness - used to expand to 6 individual ignition coils. (Coils and plugs are NOT included) HT PS2000 Toyota 2JZ Fully Terminated Harness Kit - Includes pre-wired HPI6 15AMP 6CH Ignition Module with factory coil ignition harness. Suits Square Bosch EV1 injector connectors HT PS2000 Toyota 2JZ Fully Terminated Harness Kit - Includes pre-wired M&W ignition harness. Suits Square Bosch EV1 injector connectors. Pro-16b 6-wire CDI with factory coil

2 HT PS2000 GM GEN III LS1 & LS6 Non DBW Fully Terminated Harness Kit Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) HT GM GEN III LS1 & LS6 Terminated Ignition Harness Kit Includes Bank 1 & 2 Coil Harness (Pre-wired to connect LS1 Ignition coils to OEM 7 Pin Coil Harness Connector) HT PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated Harness Kit * Requires retrofit of cable operated throttle body Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) HT PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated Harness Kit * Requires retrofit of cable operated throttle body Suits factory EV6 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit. Prewired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) HT Terminated Analogue Dual Wideband Controller & Sensor Kit Includes Haltech Dual Channel O2 controller (Pre-Wired to connect directly to GM LS1 & LS6 or LS2 & LS3 Terminated Harness) (inc two sensors and weld bungs) Platinum Sport 1000 Plug-in Kits ALL PS1000 PATCH LOOM KITS NOW INCLUDE AN AIR TEMP SENSOR, PLUG AND PINS HT PS1000 Patch Loom Kit - Nissan N14 GTIR (90-95) HT PS1000 Patch Loom Kit - Nissan S13 CA HT PS1000 Patch Loom Kit - Nissan S13 SR20 DET HT PS1000 Patch Loom Kit - Nissan S14s1 "Zenki" HT PS1000 Patch Loom Kit - Mazda RX7 FC3S-S HT PS1000 Patch Loom Kit - Mazda RX7 FC3S-S HT PS1000 Patch Loom Kit - Mazda RX7 FD3S-S6 (92-95) (2 row ECU plug - Single turbo conversion only) HT PS1000 Patch Loom Kit - Mazda RX7 FD3S-S7&8 (96-02) (4 row ECU plug - Single turbo conversion only) HT PS1000 Patch Loom Kit - Mazda MX5 NB 1.8 SP FACTORY TURBO (3 Plug/3 Row ECU) HT PS1000 Patch Loom Kit - Mazda MX5 NA 1.6 (2 Plug ECU) HT PS1000 Patch Loom Kit - Mazda MX5 NA 1.8 (2 Plug ECU) HT PS1000 Patch Loom Kit - Mazda MX5 NB 1.8 (99 Model - 3 Plug/2 Row ECU) HT PS1000 Patch Loom Kit - Mazda MX5 NA 1.8 (3 Plug ECU) HT PS1000 Patch Loom Kit - Mazda MX5 NB 1.8 Non VCT Model (3 Plug/3 Row ECU) HT PS1000 Patch Loom Kit - Mazda MX5 NB 1.8 VCT (00-04 Model - 3 Plug/3 Row ECU) HT PS1000 Patch Loom Kit - Honda OBD HT PS1000 Patch Loom Kit - EVO 1,2,3,GSR and RVR HT PS1000 Patch Loom Kit - EVO 4,5, HT PS1000 Patch Loom Kit - EVO HT PS1000 Patch Loom Kit - EVO 7 (Manual transmission only) HT PS1000 Patch Loom Kit - EVO 8 (5-speed) HT PS1000 Patch Loom Kit - Mitsubishi Galant VR4/1G DSM (89-94) HT PS1000 Patch Loom Kit - Mitsubishi 2G DSM (95-99) HT PS1000 Patch Loom Kit - Subaru RS Liberty & WRX MY HT PS1000 Patch Loom Kit - Subaru WRX MY HT PS1000 Patch Loom Kit - Subaru WRX MY Platinum Sport 2000 Plug-in Kits ALL PS2000 PATCH LOOM KITS NOW INCLUDE AN AIR TEMP SENSOR, PLUG AND PINS HT PS2000 Parallel Patch Loom Kit - Chevy C6 Corvette '06-'13 ECU only, excludes 2005 and ZR1 (Includes 12mm Coolant temp sensor) Auto or Manual, 6.0, 6.2 & 7.0, OEM E HT PS2000 Patch Loom Kit - Ford Mustang (V8 5.0/5.8L) HT PS2000 Patch Loom Kit - Ford Mustang (V8 5.0/5.8L, Manual trans only) HT PS2000 Patch Loom Kit - Toyota Supra JZA80 2JZ (Manual transmission only) RACEPAK DASHES, DATA & POWER CONTROL MODULES - CONTACT US FOR A FULL LIST OF AVAILABLE CABLES, SENSORS AND ACCESSORIES Please note: To ensure our RRP is kept as low as possible and dealer margins as high as possible, all sales of Dashes, Dataloggers, Power Control Modules and Racepak Sensors are final. No returns for credit or refund are accepted. POWER CONTROL MODULES HT KT-SW30 SmartWire Kit - 30 output channels in total amp max, amp max & 12 hardwired switch input channels. Kit includes SmartWire module, connector kit, software and USB programming cable. (Requires additional cabling and/or an external CAN Interface Module to read VNET Sensors and/or ECU information) HT SW-PNL8 SmartWire Switch Panel - Optional Aluminium Switch Panel - 8 input channels via 7 rocker switches and 1 push button (Requires additional cabling for connection) HT SW-SM16 SmartWire Switch Module - Optional Aluminium Switch Module - 16 input channels to integrate your existing switches via screw terminal block (Requires additional cabling for connection) POWER CONTROL MODULE CABLES AND ACCESSORIES HT CA-VM-TCAPF VNET Terminator Cap - FEMALE HT CA-VM-TCAPM VNET Terminator Cap - MALE HT CA-DM-T009 HT CA-DM-T024 DUAL CAN CABLE, 7 PIN VNET TEE CONNECTOR 9" (required if using VNET Modules and a HALTECH IQ3 Dash with a HALTECH ECU) DUAL CAN CABLE, 7PIN VNET TEE CONNECTOR 24" (required if using VNET Modules and a HALTECH IQ3 Dash with a HALTECH ECU) HT VM-EFIHAL Haltech External EFI CAN to VNET Interface Module Dash) (Only required if not using in conjunction with a Haltech IQ HT VM-EFIHAL2 Haltech Version 2 External EFI CAN to VNET Interface Module Haltech IQ3 Dash) (Only required if not using in conjunction with a

3 HT MB-SP1500 SmartWire Switch Panel Rollcage Tube Mount - suit dia tubing HT MB-SP1625 SmartWire Switch Panel Rollcage Tube Mount - suit dia tubing HT MB-SP1750 SmartWire Switch Panel Rollcage Tube Mount - suit dia tubing HT CA-BN-T09 SmartWire to VNET cable assembly - 6in/150mm HT CA-BN-T18 SmartWire to VNET cable assembly - 18in/450mm HT CA-BN-T36 SmartWire to VNET cable assembly - 3ft/900mm HT CA-BN-006 SmartWire to switch panel/module connection cable assembly - 6in/150mm HT CA-BN-012 SmartWire to switch panel/module connection cable assembly - 12in/300mm HT CA-BN-018 SmartWire to switch panel/module connection cable assembly - 18in/450mm HT CA-BN-024 SmartWire to switch panel/module connection cable assembly - 2ft/600mm HT CA-BN-036 SmartWire to switch panel/module connection cable assembly - 3ft/900mm HT CA-BN-048 SmartWire to switch panel/module connection cable assembly - 4ft/1.2m HT CA-BN-060 SmartWire to switch panel/module connection cable assembly - 5ft/1.5m HT CA-BN-072 SmartWire to switch panel/module connection cable assembly - 6ft/1.8m HT CA-BN-084 SmartWire to switch panel/module connection cable assembly - 7ft/2.1m HT CA-BN-096 SmartWire to switch panel/module connection cable assembly - 8ft/2.4m HT CA-BN-108 SmartWire to switch panel/module connection cable assembly - 9ft/2.7m HT CA-BN-120 SmartWire to switch panel/module connection cable assembly - 10ft/3.0m HALTECH/RACEPAK DASHES HT HALTECH IQ3 Display Dash - Reads Vnet Sensors and includes Internal CAN Interface Module to read Haltech ECU info/sensors HT HALTECH IQ3 2Gb GPS/G-meter Logger Dash - Reads Vnet Sensors and includes Internal CAN Interface Module to read Haltech ECU info/sensors HT MB-IQ3 IQ3 DASH Mounting Bracket - Black anodized aluminium ECU/DASH/CAN WIDEBAND PACKAGES Buy any Elite, Sport or Pro ECU, a single or dual CAN Wideband kit and either a Haltech IQ3 Display or Logger Dash and receive a free CAN Hub-Mini to connect it all together! CAN Expansion Products IO 12 Expander Box - 12 Channel (AVI) - 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) - 4 Analogue Voltage Inputs HT IO 12 Expander Box A - CAN Based 12 Channel - ECU Only (includes Black 600mm CAN Cable) HT IO 12 Expander Box B - CAN Based 12 Channel - ECU Only (includes Black 600mm CAN Cable) HT IO 12 Expander Box A - CAN Based 12 Channel inc Plug & Pins (includes Black 600mm CAN Cable) HT IO 12 Expander Box B - CAN Based 12 Channel inc Plug & Pins (includes Black 600mm CAN Cable) HT IO 12 Expander Box A - CAN Based 12 Channel inc Flying Lead Harness 2.5m (includes Black 600mm CAN Cable) HT IO 12 Expander Box B - CAN Based 12 Channel inc Flying Lead Harness 2.5m (includes Black 600mm CAN Cable) HT Plug and Pins Only - 24 Pin TYCO - Suit IO 12 Box & Emulator HT IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only - (Suits A or B Box) CAN HUB HT CAN HUB-Mini 3 Port - for use with up to two CAN devices (includes 1 x White 300mm/12" CAN cable) HT CAN HUB 6 Port - for use with up to five CAN devices (includes 4 x White 300mm/12" CAN cables) CAN EXPANSION CABLES HT Haltech Elite DTM4 CAN Cable Black 300mm NEW HT Haltech Elite DTM4 CAN Cable Black 600mm NEW HT Haltech Elite DTM4 CAN Cable Black 1200mm NEW HT Haltech CAN Cable Black 75mm HT Haltech CAN Cable White 75mm HT Haltech CAN Cable Black 150mm HT Haltech CAN Cable White 150mm HT Haltech CAN Cable Black 300mm HT Haltech CAN Cable White 300mm HT Haltech CAN Cable Black 600mm HT Haltech CAN Cable White 600mm HT Haltech CAN Cable Black 900mm HT Haltech CAN Cable White 900mm HT Haltech CAN Cable Black 1200mm HT Haltech CAN Cable White 1200mm HT Haltech CAN Cable Black 1800mm HT Haltech CAN Cable White 1800mm HT Haltech CAN Cable Black 2400mm HT Haltech CAN Cable White 2400mm HT Haltech CAN Cable Black 3000mm HT Haltech CAN Cable White 3000mm HT Haltech CAN Cable Black 3600mm HT Haltech CAN Cable White 3600mm ECU Harnesses HT PS500 Autospec Flying Lead Loom Only - Long - 2.5m/8ft HT PSRE Autospec Flying Lead Loom Only - Long - 2.5m/8ft HT PS1000 Autospec Flying Lead Loom Only - Short - 1.2m/4ft HT PS1000 Autospec Flying Lead Loom Only - Long -2.5m/8ft with NEW 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits HT PS2000 Autospec Flying Lead Loom Only - Short - 1.2m/4ft HT PS2000 Autospec Flying Lead Loom Only - Long -2.5m/8ft with NEW 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits HT Elite m (4 ft) Basic Universal Wiring Harness Only (no relays or fuses) New HT Elite m (8 ft) Premium Universal Wiring Harness Only - with firewall grommet, moulded 6 power circuit Haltech fuse box & lid. Includes 4 relays & 7 fuses. (includes pins for the 2 spare power circuits) New HT Sport to Elite Harness upgrade kit -13 terminated colour coded 2.5m wires and 2 blanking pins New Termimated Engine Harnesses HT PS1000 Mazda 13B Fully Terminated Harness Only - Includes flying lead ignition harness. Suits Square Bosch EV1 injector connectors

4 HT PS1000 Mazda 13B Fully Terminated Harness Only - Includes pre-wired LS1 ignition coil harness. Suits Square Bosch EV1 injector connectors (LS1 ignition coils are NOT included. Please order 4 x HT if required) HT PS1000 Mazda 13B Fully Terminated Harness Only - Includes pre-wired HPI4 15AMP 4CH Ignition module harness. Suits Square Bosch EV1 injector connectors (Ignition module & coils are NOT included. Please order HT & 4 x HT if required) HT PS2000 FORD Fully Terminated Full Sequential Harness Only Suits Square Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block Kit. Full Sequential Injection Pre-wired to connect directly to OEM TFI Module, Includes breakouts for Distributor or Crank Sensor Trigger (Use with OEM TFI Ignition or CDI MSD6, MSD7, Crane, Mallory, etc) HT PS2000 Nissan RB30 Single Cam Fully Terminated Harness Only - Suits Square Bosch EV1 injector connectors. Includes Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket. Includes air & coolant temp sensors. (Can be reconfigured to run 6 indiviudal ignition coils using HT ) HT PS2000 Nissan RB30 6 Channel Flying Lead Ignition Harness - used to expand to 6 individual ignition coils. (Coils and plugs are NOT included) HT PS2000 Toyota 2JZ Fully Terminated Harness Only - Includes pre-wired HPI6 15AMP 6CH Ignition Module to factory coil ignition harness. Suits Square Bosch EV1 injector connectors. (Ignition module is NOT included. Please order HT if required) HT PS2000 Toyota 2JZ Fully Terminated Harness Only - Suits Square Bosch EV1 injector connectors. Includes pre-wired M&W Pro-16b 6-wire CDI to factory coil ignition harness. (CDI module is NOT included. Please order HT if required) HT PS2000 GM GEN III LS1 & LS6 Non DBW Fully Terminated Harness Only Suits Square Bosch EV1 injector connectors. Includes Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (LS1 ignition coils and Harnesses are NOT included) HT GM GEN III LS1 & LS6 Terminated Ignition Harness Kit Includes Bank 1 & 2 Coil Harness (Pre-wired to connect LS1 Ignition coils to OEM 7 Pin Coil Harness Connector) HT PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated Harness Only * Requires retrofit of cable operated throttle body Suits Square Bosch EV1 injector connectors. Includes Engine Harness & Fuse Block Kit. Prewired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) HT PS2000 GM GEN IV LS2 & LS3 Non DBW Fully Terminated Harness Only * Requires retrofit of cable operated throttle body Suits factory EV6 injector connectors. Includes Engine Harness & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) Patch Harnesses ALL PATCH HARNESSES NOW INCLUDE AN AIR TEMP SENSOR, PLUG AND PINS HT PS1000 Patch Loom Only - Nissan N14 GTIR (90-95) HT PS1000 Patch Loom Only - Nissan S13 CA HT PS1000 Patch Loom Only - Nissan S13 SR20 DET HT PS1000 Patch Loom Only - Nissan S14s1 "Zenki" HT PS1000 Patch Loom Only - Mazda RX7 FC3S-S4 (86-88) HT PS1000 Patch Loom Only - Mazda RX7 FC3S-S5 (89-91) HT PS1000 Patch Loom Only - Mazda RX7 FD3S-S6 (92-95) (2 row ECU plug - Single turbo conversion only) HT PS1000 Patch Loom Only - Mazda RX7 FD3S-S7&8 (96-02) (4 row ECU plug - Single turbo conversion only) HT PS1000 Patch Loom Only - Mazda MX5 NB 1.8 SP FACTORY TURBO (3 Plug/3 Row ECU) HT PS1000 Patch Loom Only - Mazda MX5 NA 1.6 (2 Plug ECU) HT PS1000 Patch Loom Only - Mazda MX5 NA 1.8 (2 Plug ECU) HT PS1000 Patch Loom Only - Mazda MX5 NB 1.8 (99 Model - 3 Plug/2 Row ECU) HT PS1000 Patch Loom Only - Mazda MX5 NA 1.8 (3 Plug ECU) HT PS1000 Patch Loom Only - Mazda MX5 NB 1.8 Non VCT Model (3 Plug/3 Row ECU) HT PS1000 Patch Loom Only - Mazda MX5 NB 1.8 VCT Model (3 Plug/3 Row ECU) HT PS1000 Patch Loom Only - Honda OBD HT PS1000 Patch Loom Only - EVO 1,2,3,GSR and RVR HT PS1000 Patch Loom Only - EVO 4,5, HT PS1000 Patch Loom Only - EVO HT PS1000 Patch Loom Only - EVO 7 (Manual transmission only) HT PS1000 Patch Loom Only - EVO 8 (5-speed) HT PS1000 Patch Loom Only - Mitsubishi Galant VR4/1G DSM (89-94) HT PS1000 Patch Loom Only - Mitsubishi 2G DSM (95-99) HT PS1000 Patch Loom Only - Subaru RS Liberty & WRX MY HT PS1000 Patch Loom Only - Subaru WRX MY HT PS1000 Patch Loom Only - Subaru WRX MY HT PS2000 Parallel Patch Loom Only - Chevy C6 Corvette '06-'13 Auto or Manual, 6.0, 6.2 & 7.0, OEM E38 ECU only, excludes 2005 and ZR1 (Includes 12mm Coolant temp sensor) HT PS2000 Patch Loom Only - Ford Mustang (V8 5.0/5.8L) HT PS2000 Patch Loom Only - Ford Mustang (V8 5.0/5.8L, Manual trans only) HT PS2000 Patch Loom Only - Toyota Supra JZA80 2JZ (Manual transmission only) PLUGS, PINS AND WIRING PRODUCTS HT Plug and Pins Only - 26 & 34 Pin AMP - Suit E8/11 - PS1000/2000 ECU HT ECU Pins Only - Suit 26 Flat/26 & 34 Pin AMP Range (& E6X) - Pack of HT Plug and Pins Only - 8 Pin TYCO -Suit Can Connector BLACK HT Plug and Pins Only - 8 Pin TYCO - Suit Can Connector WHITE HT Plug and Pins Only - 12 Pin TYCO - Suit Digital Reluctor Adaptor (DRA) HT Plug and Pins Only - 16 Pin TYCO - Suit PRO/Sport Plug-in Aux harn & TCA Box HT Plug and Pins Only - 24 Pin TYCO - Suit IO 12 Box & Emulator HT Plug and Pins Only - 32 Pin TYCO - Suit Sprint & Platinum Interceptor HT ECU Pins only - Suit 8-32 Pin TYCO Range - Pack of

5 HT Power Relay 30A 5 Pin with Mounting Tab - 30A (Does not suit Haltech Fuse box) HT Plug and Pins Only -Suit Power Relay HT Power Relay 30A 5 Pin suits Haltech Fuse Box (No mounting tab) - 30A HT Plug and Pins Only -Suit Bosch Injectors EV1 Square Type HT Plug and Pins Only -Male Adaptor suit Bosch Injectors EV1 Square Type HT Plug and Pins Only -Suit Factory Toyota 2JZ ign coil HT Plug and Pins Only -Suit Factory Toyota 2JZ Crank or Cam HT Plug and Pins Only -Suit Factory Toyota 2JZ 6 Pin Idle Speed Motor HT Circuit Haltech Fuse Box with Lid and all required pins (Does not include relays or fuses) HT Pins only - Suit Fuses only in the 6 Circuit Haltech Fuse Box -Pack of HT Pins only - Suit Relays only in the 6 Circuit Haltech Fuse Box -Pack of HT Firewall Grommet - Black Rubber suits 2" (51mm) hole NEW ECU INPUTS MAP SENSORS HT Silicone Hose 3mm ID (2m/6ft Length) - Black HT Bulkhead Hose Connector -Suit MAP Sensor Hose (3-5mm ID) HT Bar GM MAP Sensor (inc plug & pins) HT Plug and Pins Only -Suit 1 Bar GM MAP Sensor (Green) HT Bar GM MAP Sensor (inc plug & pins) HT Plug and Pins Only -Suit 2 Bar GM MAP Sensor (Black) HT Bar GM MAP Sensor (inc plug & pins) HT Plug and Pins Only -Suit 3 Bar GM Map Sensor (Orange) HT Bar GM MAP Sensor (inc plug & pins) HT Plug and Pins Only -Suit 4 Bar GM Map Sensor HT Bar "TI" MAP Sensor (inc plug & pins) 1/8 NPT HT Plug and Pins Only -Suit 5 Bar "TI" MAP Sensor HT Bar "TI" MAP Sensor (inc plug & pins) 1/8 NPT HT Plug and Pins Only -Suit 6.5 Bar "TI" MAP Sensor HT Bar Billet Remote Mount Delco MAP Sensor Kit (inc plug & pins) HT Bar Delco MAP Sensor Only (inc plug & pins) HT Plug and Pins Only -Suit 1 Bar Delco MAP Sensor HT Bar Billet Remote Mount Delco MAP Sensor Kit (inc plug & pins) HT Bar Delco MAP Sensor Only (inc plug & pins) HT Plug and Pins Only -Suit 2 Bar Delco MAP Sensor HT Bar Billet Remote Mount Delco MAP Sensor Kit (inc plug & pins) HT Bar Delco MAP Sensor Only (inc plug & pins) HT Plug and Pins Only -Suit 3.3 Bar Delco MAP Sensor PRESSURE SENSORS HT Bar "KAV" (145 PSI) Fuel and Oil Pressure Sensor (inc plug & pins) NEW Stainless steel version HT Plug and Pins Only - Suit 10 Bar "KAV" Fuel and Oil Pressure Sensor HT PSI "TI" Fuel and Oil Pressure Sensor (inc plug & pins) 1/8 NPT HT Plug and Pins Only - Suit 150 PSI "TI" Fuel and Oil Pressure Sensor HT PSI "TI" Fuel and Oil Pressure Sensor (inc plug & pins) 1/8 NPT HT Plug and Pins Only - Suit 250 PSI "TI" Fuel and Oil Pressure Sensor HT PSI "Honeywell" Brake and Nitrous Pressure Sensor (inc plug & pins) 1/8 NPT HT Plug and Pins Only - Suit 2000 PSI "Honeywell" Pressure Sensor AIR TEMP SENSORS (127 C or 260 F MAX READING) HT Air Temp Sensor - Small Thread (inc plug & pins) M14 x HT Plug and Pins Only - Suit Air Temp Sensor - Small Thread HT Air Temp Sensor - Large Thread (inc plug & pins) 3/8 NPT 18TPI HT Plug and Pins Only - Suit Air Temp Sensor - Large Thread HT Air Temp Sensor - 1/4 NPT Thread (inc plug & pins) HT Plug and Pins Only - Suit Air Temp Sensor 1/4 NPT HT Air Temp Sensor - 1/8 NPT Thread (inc plug & pins) HT Plug and Pins Only - Suit Air Temp Sensor 1/8 NPT HT Weld Fitting M14 x Suit Small Thread Air Temp - Aluminum 8.00 HT Weld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum 8.00 FUILD TEMP SENSORS (Typically 127 C or 260 F MAX READING) HT Coolant Temp Sensor - Small Thread (inc plug & pins) M12 x HT Plug and Pins Only - Suit Coolant Temp Sensor - Small Thread HT Coolant Temp Sensor - Large Thread (inc plug & pins) 3/8 NPT 18TPI HT Plug and Pins Only - Suit Coolant Temp Sensor - Large Thread HT Coolant Temp Sensor - 1/8 NPT Thread (inc plug & pins) HT Plug and Pins Only - Suit Coolant Temp Sensor 1/8 NPT HT Weld Fitting M12 x Suit Small Thread Water Temp - Aluminum 8.00 HT Weld Fitting 3/8 NPT - Suit Large Water Temp - Aluminum 8.00 HT Oil Temperature sensor, 150 C, 1/8npt thread, inc plug and pins NEW HT Oil Temperature sensor, High Range 150 C, 1/8 NPT thread, inc plug and pins NEW THROTTLE POSITION SENSORS HT Throttle Position Sensor -Grey CW Rot. 8mm D-Shaft (inc plug & pins) HT Plug and Pins Only - Suit Throttle Position Sensor - Grey HT Throttle Position Sensor -Black CCW Rot. 8mm D-Shaft (inc plug & pins) *Most Common Type* HT Plug and Pins Only - Suit Throttle Position Sensor - Black TRIM MODULES HT Boost/Fuel/Ign Trim Module - Suit E8/E11 & most patch harness *Please confirm plug type* HT Boost/Fuel/Ign Trim Module - Suit Platinum Sport 1000/ Long or Short Harness PICKUP/TRIGGERS HT DRA Digital Reluctor Adaptor - inc Harness (Converts Sine wave VR sensor output to Digital signal) HT Plug and Pins Only - 12 Pin TYCO - Suit Digital Reluctor Adaptor (DRA) HT DRA - 0.6m/2ft Flying Lead Harness Only HT Rare Earth Magnets (5mm DIA x 2mm H) HT S3 - Black Dual Channel Hall Effect Sensor 1/2" UNF (inc plug & pins) HT Plug and Pins Only - Suit S3 Black Hall Effect Sensor HT S4 - Grey Dual Channel Hall Effect Sensor 1/2" UNF (inc plug & pins) HT Plug and Pins Only - Suit S4 Grey Hall Effect Sensor 13.00

6 HT Honeywell GT101 Single Channel Hall Effect Sensor 18mm DIA (Wheel Speed, Crank/Cam) (inc matching DTM 3 plug and pin set) HT "Red" Single Channel Hall Effect Sensor M12x1.0 (Wheel Speed, Crank/Cam) (inc matching DTM 3 plug and pin set) HT Stainless Steel Single Channel Hall Effect Sensor 3/8-24 (Wheel Speed, Crank/Cam) (inc matching DTM 3 plug and pin set) CAN Wideband Controllers (CAN and 0-5 V analogue outputs) via CAN Accurate digital signal with diagnostic and status reporting HT WBC1 - Single Channel CAN Wideband Controller Kit - Box A with 2.5m/8ft flying lead harness, Black 600mm CAN cable, one sensor and weld-on bung HT WBC1 - Single Channel CAN Wideband Gauge Kit - Box A with 2.5m/8ft flying lead harness, Black 600mm CAN cable, one sensor, weld-on bung and Single Channel 52mm Black Bezel & Red Display Gauge HT WBC1 - Single Channel CAN Wideband Controller Box A - ECU ONLY (includes Black 600mm CAN Cable) HT WBC2 - Dual Channel CAN Wideband Controller Kit - Box A with 2.5m/8ft flying lead harness, Black 600mm CAN cable, two sensors and weld-on bungs HT WBC2 - Dual Channel CAN Wideband Gauge Kit - Box A with 2.5m/8ft flying lead harness, Black 600mm CAN cable, two sensors, weld-on bungs and Dual Channel 52mm Black Bezel & Red Display Gauge HT WBC2 - Dual Channel CAN Wideband Controller Box A - ECU ONLY (includes Black 600mm CAN Cable) WBC WIRING HT Plug and Pins Only - 24 Pin TYCO - Suit IO12 Box, WB1, WB2 & Emulator HT WBC1 - Single Channel CAN Wideband Controller - 2.5m/8ft Flying Lead Harness Only HT WBC2 - Dual Channel CAN Wideband Controller - 2.5m/8ft Flying Lead Harness Only O2 Sensors and Accessories HT Methanol Wideband Controller - inc Ext Harness, NTK Sensor & Weld Bung HT Methanol Wideband NTK Sensor Only O2 Sensors and Accessories HT Narrow Band O2 Sensor 4 Wire - for direct use with ECU (No controller required) HT O2 Sensor Weldable Fitting Bung and Blanking Plug M18 x HT Wideband O2 Sensor only - Bosch LSU 4.2 (pre-terminated with 6 Pin DT connector) HT Wideband 4.0m/12ft O2 Sensor Extension Harness (6 Pin DT connectors) HT Wideband O2 Single Channel Gauge Only - Black Bezel & Red Display (For use with CAN or Analogue Wideband Controllers) HT Wideband O2 Dual Channel Gauge Only - Black Bezel & Red Display (For use with CAN or Analogue Wideband Controllers) Flex Fuel Sensors HT Flex Fuel Composition Sensor - Suit 3/8 "GM Spring Lock" fittings (inc plug & pins) HT Plug and Pins Only - Suit Flex Fuel Composition Sensor HT Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male - Suits Flex Fuel Sensor (Includes Two Fittings) HT IO Expander/Flex Fuel Composition Sensor Bundle - Buy together and save! Cable) - Required for some Platinum PRO Plug-in ECUs. Please consult Haltech for further information (inc both plug & pins & BB600 CAN KNOCK SENSORS HT Knock Sensor -Genuine Bosch suit 8mm (5/16") mounting bolt (inc plug & pins) NEW HT Plug and Pins Only - Suit Knock Sensor -Genuine Bosch suit 8mm (5/16") mounting bolt NEW CAN THERMOCOUPLE EXPANSION PRODUCTS (1250 C or 2282 F MAX READING) TCA2 - Dual Channel Thermocouple Kit length listed) and 2 x Fitting kits (any type listed) Includes 2 x 1/4" Open TIP Thermocouples (any To order this kit to suit your specific application please select from the parts listed below TCA4 - Quad Channel Thermocouple Kit length listed) and 4 x Fitting kits (any type listed) Includes 4 x 1/4" Open TIP Thermocouples (any To order this kit to suit your specific application please select from the parts listed below THERMOCOUPLE AMPLIFIERS (CAN or 0-5 V analogue outputs) HT TCA2 - Dual Channel Thermocouple Amplifier Box A - BOX ONLY (includes Black 600mm CAN Cable) HT TCA2 - Dual Channel Thermocouple Amplifier Box B - BOX ONLY (includes Black 600mm CAN Cable) HT TCA4 - Quad Channel Thermocouple Amplifier Box A - BOX ONLY (includes Black 600mm CAN Cable) HT TCA4 - Quad Channel Thermocouple Amplifier Box B - BOX ONLY (includes Black 600mm CAN Cable) TCA WIRING (Optional - Only required if using the 0-5 V outputs) HT Plug and Pins Only - 16 Pin TYCO - Suit PRO/Sport Plug-in Aux harn & TCA Box HT TCA2 - Dual Channel Thermocouple Amplifier Box - 1.5m/3ft Flying Lead Harness Only HT TCA4 - Quad Channel Thermocouple Amplifier Box - 1.5m/3ft Flying Lead Harness Only TERMINATED THERMOCOUPLES - Suit TCA Terminated with Mini K Type Connector HT /4" Open Tip Thermocouple only - (0.61m) 24" Long HT /4" Open Tip Thermocouple only - (0.72m) 28-1/2" Long HT /4" Open Tip Thermocouple only - (0.84m) 33" Long HT /4" Open Tip Thermocouple only - (0.95m) 37-1/2" Long HT /4" Open Tip Thermocouple only - (1.07m) 42" Long HT /4" Open Tip Thermocouple only - (1.18m) 46-1/2" Long HT /4" Open Tip Thermocouple only - (1.30m) 51" Long HT /4" Open Tip Thermocouple only - (1.41m) 55-1/2" Long HT /4" Open Tip Thermocouple only - (1.52m) 60" Long HT /4" Open Tip Thermocouple only - (1.64m) 64-1/2" Long HT /4" Open Tip Thermocouple only - (1.75m) 69" Long HT /4" Open Tip Thermocouple only - (1.87m) 73-1/2" Long HT /4" Open Tip Thermocouple only - (1.98m) 78" Long HT /4" Open Tip Thermocouple only - (2.10m) 82-1/2" Long HT /4" Open Tip Thermocouple only - (2.21m) 87" Long HT /4" Open Tip Thermocouple only - (2.32m) 91-1/2" Long HT /4" Open Tip Thermocouple only - (2.44m) 96" Long 52.00

7 THERMOCOUPLE FITTING KITS HT /4" Mild Steel Weld-on Kit - inc Nut and Ferrule HT /4" Stainless Steel Weld-on Kit - inc Nut and Ferrule HT /4" Stainless Compression Fitting Kit - 1/8 NPT Thread THERMOCOUPLE FITTING SPARES HT /4" Nut and Brass Ferrule Only 7.00 HT /4" Mild Steel Weld-on Base Only 7.00 HT /4" Stainless Steel Weld-on Base Only 7.00 ECU OUTPUTS OEM IGNITION MODULES HT Dual Channel Igniter (DUMB) - inc Plugs, Pins, Mounting Bracket and Paste HT Plug and Pins Only - Suit Dual Channel Igniter HT Triple Channel Igniter (DUMB) - inc Plugs, Pins, Mounting Bracket and Paste HT Plug and Pins Only - Suit Triple Channel Igniter HT Quad Channel Igniter (DUMB) - inc Plugs, Pins, Mounting Bracket and Paste HT Plugs and Pins Only - Suit Quad Channel Igniter HT Mounting Bracket only - Suit all Haltech Igniters - inc screws and paste HT Thermal Paste - Suits all Igniters AMP HIGH POWER IGNITER MODULES HT HPI4 - High Power Igniter - Quad Channel - Module Only HT Plug and Pins Only -Suit 26 Pin Flat AMP Quad Channel HPI HT HPI4 - High Power Igniter - Quad Channel - inc Plug & Pins HT HPI4 - High Power Igniter - Quad Channel - 2m Flying Lead Kit HT HPI4 - High Power Igniter - 2m Flying Lead Loom Only HT HPI6 - High Power Igniter - Six Channel - Module Only HT Plug and Pins Only -Suit 26 Pin Flat AMP Six Channel HPI HT HPI6 - High Power Igniter - Six Channel - inc Plug & Pins HT HPI6 - High Power Igniter - Six Channel - 2m Flying Lead Kit HT HPI6 - High Power Igniter - 2m Flying Lead Loom Only HT HPI8 - High Power Igniter - EigHT- Channel - Module Only HT Plug and Pins Only -Suit 26 Pin Flat AMP EigHT- Channel HPI HT HPI8 - High Power Igniter - EigHT- Channel - inc Plug & Pins HT HPI8 - High Power Igniter - EigHT- Channel - 2m Flying Lead Kit HT HPI8 - High Power Igniter - 2m Flying Lead Loom Only IGNITION COILS HT High Output IGBT Inductive Coil suit HPI modules - inc Plug & Pins NEW HT Plugs and Pins Only - Suit High Output IGBT Inductive Coil NEW HT High Output IGBT Inductive Coil with built-in Ignitor - inc Plug & Pins NEW HT Plugs and Pins Only - Suit High Output IGBT Inductive Coil with built-in Ignitor NEW HT LS1 Coil with built-in igniter (inc plug & pins) HT Plugs and Pins Only - Suit LS1 Coil HT Dual Post 12Volt Coil (No igniter included) HT LS Truck Style Coil with built-in Ignitor (inc plug & pins) HT Plugs and Pins Only - Suit LS Truck Style Coil HT Bosch HEC Single High Power Inductive coil suit HPI modules - inc Plug & Pins Capacitor Ignition Systems - CDI Power Select CDI - Selectable dual power output 115mJ/150mJ spark energy allows your ECU to automatically switch output power on the fly under high load conditions. Control 4, 6 or 8 channels of direct fire ignition using only one ignition output. Re-use your unused ignition outputs to control other functions (Sport ECUs only). *Requires Haltech IMS - (Ignition Multiplex System) single wire ignition trigger output. (Platinum Sport & Pro Plug-in ECUs Only) HT Power Select 4 CDI - Dual Power Output 115mJ/150mJ - inc Plug and Pins. (Can be used to convert to direct fire ignition on EVO 8MR & EVO 9 using a Haltech Pro Plug-in ECU) NEW HT Power Select 6 CDI - Dual Power Output 115mJ/150mJ - inc Plug and Pins NEW HT Power Select 8 CDI - Dual Power Output 115mJ/150mJ - inc Plug and Pins. (Can be used to convert to direct fire ignition on 8 cylinder engines using a Haltech Sport ECU) NEW HT High Output CDI Coil - inc Plug & Pins NEW HT Plugs and Pins Only - Suit High Output CDI Coil NEW M&W CDIs HT M&W Pro-10 All triggers HT M&W Pro-12 CDI Hall/Ecu trigger HT M&W Pro-14 CDI Hall/Ecu trigger HT M&W Pro-14b CDI (Twin cap) Hall/Ecu trigger HT M&W Pro-14d CDI Motec IEX trigger HT M&W Pro-16 CDI (Pair) Hall/Ecu trigger HT M&W Pro-16b CDI Hall/Ecu trigger HT M&W Pro-16c CDI Autronic multiplex trigger HT M&W Pro-16d CDI Motec IEX trigger HT M&W Pro-18b CDI Hall/Ecu trigger HT M&W Pro-18c CDI Autronic multiplex trigger HT M&W Pro-18d CDI Motec IEX trigger HT M&W Pro-14 Rotary CDI Hall/Ecu trigger HT M&W Pro-Drag2 250mJ CDI Hall/Ecu trigger HT M&W Pro-Drag4 250mJ CDI Hall/Ecu trigger HT M&W Pro-Drag6 250mJ CDI (Pair) Hall/Ecu trigger HT M&W Pro-Drag Rotary 250mJ CDI (Twin cap) Hall/Ecu trigger HT CDI Wire3 14ga twisted pair tefzel (use for battery power supply) -per Metre 8.00 HT CDI Wire6 20ga twisted shielded tefzel (use for CDI to coil wiring) -per Metre 8.00 IDLE CONTROL HT Idle Air Control Housing -Billet 4 Port Housing suits Screw-in motor HT Idle Air Control Motor - Screw-in -inc plug and pins HT Plugs and Pins Only - Suit Idle Air Control Motor - Screw-in HT Idle Air Control Kit - Billet 1/4BSP 4 Port Housing & Screw-in motor - inc Plug and Pins HT Idle Air Control Kit - Billet 1/4BSP 2 Port Housing & 2 Screw Style Motor - inc Plug and Pins HT Plugs and Pins Only - Suit Idle Air Control Motor - 2 Screw Style HT Idle Air Control Valve Bosch BAC/PWM 2 port, 2 pin, Inc plug and pins (For Sprint ECU or Pro ECU where 4 wire stepper motor idle control output not available) BOOST CONTROL

8 HT Boost Control Solenoid - 33Hz (inc hose fittings, rubber isolated mount and matching DTM 2 plug and pins set) SOLID STATE RELAYS HT Solid State Relay AMP HT Solid State Relay - 40 AMP INJECTOR BALLAST RESISTOR HT Injector Ballast Resistor 6 OHMS - 6 output with matching plug set EMULATORS HT Device Emulator 8 CH -inc 6 Spare Pull ups (Box Only) HT Device Emulator 8 CH -inc 6 Spare Pull ups - inc Plug & Pins HT Device Emulator 8 CH -inc 6 Spare Pull ups - 1m/3ft Flying Lead Kit HT Plug and Pins Only - 24 Pin TYCO - Suit IO 12 Box & Emulator HT Device Emulator 8 CH- 1m/3ft Loom Only HT HT HT Siemens Deka 60 Lb/h (610cc/m) Hi-impedance Injector (12 Ohms) 14mm O-rings FUEL SYSTEM FUEL INJECTORS - (Plug and pins not included) Siemens Deka 60 Lb/h (610cc/m) Hi-impedance Injector - SHORT (12 Ohms) between the 14mm O-rings Bosch Square EV1 style plug - 60mm in length between the Bosch Square EV1 style plug - 34mm in length Continental 80 Lb/h (810cc/m) Hi-impedance Injector (12 Ohms) US EV6 style plug - 60mm in length between the 14mm O- rings FUEL INJECTORS PLUG & PINS HT Plug and Pins Only - Suit Bosch Injectors EV1 Square Type HT Plug and Pins Only - Male Adaptor suit Bosch Injectors EV1 Square Type HT Plug and Pins Only - Suit US Injectors EV6 Type (also suits ID1000) HT Plug and Pins Only - Suit ID2000/Bosch2000 Injectors Denso Oval Type HT Male Adaptor suit Bosch Injectors EV1 Square Type - 75mm flying lead used for injector plug adaptors HT Female Adaptor suit Bosch Injectors EV1 Square Type - 75mm flying lead used for injector plug adaptors TUNING AND TOOLS HT Software Resource CD - All Products HT Software Resource USB KEY - All Products HT Haltech Resource Manual - All ECU's - ENGLISH HT Haltech Resource Manual - All ECU's - SPANISH HT Serial Cable 9 Pin 2m - suits E6, E8, E11 and Interceptor range of ECU's HT USB Connection Cable 2m - suits Platinum Sprint, Sport & Pro range of ECU's HT USB to Serial Adaptor - with Software CD HT Pro Tuner "Knock Ears" Kit - Dual Channel 2014 Spec - includes 2 sensors HT Knock Sensor Only - Suit 2014 Pro Tuner "Knock Ears" Kit HT USB Stingray 2CH SCOPE with 2 Probe Kits HT Single Replacement Probe kit - suit USB 2CH Scope HT LED Test Probe - Red/Green 6-24v HT Dual Crimper set - inc 3 pin removal tools SERVICES HT ECU Bench test (EXCLUDING ALL FREIGHT- CHARGES) HT ECU Repairs (MINIMUM CHARGE EXCLUDING ALL FREIGHT- CHARGES) HT ECU Splash Proofing - includes coating of PCB and USB /CAN port bungs HT Racepak ROM UPGRADE (Increases from 16 to 20 EFI Channels & 32 to 40 total loggable channels) (EXCLUDING ALL FREIGHT- CHARGES) PROMOTIONAL ITEMS DISPLAY HT Haltech Mini Catalogue - Pack of HT Haltech Sticker A5 Sticker Sheet - Colour 1.00 HT Haltech Sticker 300mm - Colour 4.00 HT Haltech Sticker 600mm - Colour 8.00 HT Haltech Sticker 900mm - Colour HT Haltech Injector Ninja Sticker 100mm 4.00 HT Haltech Injector Ninja Sticker 200mm 8.00 HT Haltech Injector Ninja Sticker 400mm HT ECU Display Set (Sprint 500, Sport 2000 and Pro Plug in) HT Workshop Banner 1.8m - " HT Workshop Banner 1.8m - "Authorized Dealer" CLOTHING HT Haltech Ninja Sling Bag - Black 5.00 HT Haltech Baseball Cap - Yellow "Ninja Head" - Multifit Adjustable HT Haltech Baseball Cap - B&W "Ninja Head" - Multifit Adjustable HT Haltech T-Shirt - Medium HT Haltech T-Shirt - Large HT Haltech T-Shirt - XL HT Haltech T-Shirt - 2XL HT Haltech T-Shirt - 3XL 14.00