CoTradeCo.com Pelican 0450 Tool Chest

Size: px

Start display at page:

Download "CoTradeCo.com Pelican 0450 Tool Chest"

Allan Dennis
5 years ago
Views:

1 Pelican 0450 Tool Chest

2 0450 Front & Top Open View

3 0450 Topside Work Area

4 0450 Features Lock Compatibility and ID Panel Recessed nameplate area Resists accidental removal Lid/face release design with Two robust locking holes

5 0450 Features Hybrid Double Throw-Butterfly Latch Pelican s patented Double-Throw Latch has Been tested to 382 lbs. of Pull force. The Pelican Tool Chest Latch incorporates the Same robust design but Has been upgraded wwith A metal butterfly Compression latch.

The stainless steel hinge pin Provides extra protection From impact.

6 0450 Features Heavy-Duty Buttress Hinges Raised ribs on the lid hinge points serves two functions: 1. The stainless steel hinge pin Provides extra protection From impact. 2. The lid stops at 180 degrees To serve as a work space. The lid has been tested To support 50 lbs. open.

7 0450 Features Two-Way Handles The Pelican Tool Case has extra Deep handles on each end that Can be lifted from any direction. Open Tool Chest Position Transport Position

Polyurethane wheels with Stainless steel bearings offer

8 0450 Features Extra-Wide Wheels Extra-wide wheels distribute Load over soft terrain. Polyurethane wheels with Stainless steel bearings offer Low-resistance transport. A Nylon hub insulates the tire From heat generated by the ball bearings.

9 0450 Features Front-Up Mobility The Pelican Tool Case has Oversized, rounded ribs, making it Easy to roll onto it s back for transport.

10 0450 Features Front-Up Mobility By locating the wheels on The back of the chest, the Pelican Tool Case offers a Wide, stable track. This also leaves the front of The chest clear of wheel Obstructions, creating more Useable drawer space Within The case.

11 0450 Features Stable Wide-Track Design

12 0450 Features Trolley Handle & Wheel System Using simple fasteners the Trolley handle and wheel can Be replaced in the field. This also assures simple Cleaning should debris Become Lodged within the parts.

13 0450 Features Graduated Deflector Ribs The Pelican tool Case uses Heavy duty ribs to protect Hinges and latches from Shipping damage. Graduated ribs deflect energy Away from the case.

14 0450 Features Secure-Stack Design Extra deep pockets mate with Foot blocks on the bottom of the Pelican Tool Case. This Block-in-pocket design Locks the cases together to Prevent lateral movement.

15 0450 Chassis and Slide Assembly Slides Chassis

16 0450 Chassis, Slide and Drawer Assembly

17 0450 Complete Chassis, Slide and Drawer Assembly

18 0450 Optional Drawer Configurations Available

19 0450 Sample Drawer Layouts

20 0450 Sample Drawer Layouts

21 0450 Schematic - Without Slide Chassis Insert.36 radius Wheel Cavity 2.37 height 2.0 depth 2.33 width (2.27 radius) Opening 12.6 (Draft 12.5) Opening 13.2 (Draft 12.5) 2 Draft 12.5 Wheel Cavity 4.2 height 2.0 depth 2.33 width (2.27 radius) Opening (Draft 20.5) Opening (Draft 20.0).79 radius

22 0450 Schematic - With Slide Chassis Insert 2 Draft 12.5 Opening 12.6 (Draft 12.5) Opening 13.2 (Draft 12.5) Removable Slides Chassis Frame (No Draft) RIbs

23 0450 With Slide Chassis Insert

24 0450 Schematic - Top View With Slide Chassis Insert Removable Slides Chassis Frame (No Draft)

25 0450 Schematic - Top View Without Slide Chassis Insert Draft Opening 21.31

Technical Data Sheet Signature 841

Technical Data Sheet Signature 841 Signature 800 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43 or 47 with gypsum board faces STC 49, 52, 53, or