JTC-1040 ANT FREEZE TESTER

Size: px

Start display at page:

Download "JTC-1040 ANT FREEZE TESTER"

Stephen Jordan
5 years ago
Views:

JTC-1039 BATTERY TESTER Avoids dead battery and helps to extend battery life.

Test all permanent (Ethylene Glycol) solution with radiator hot or cold.

1 JTC-1039 BATTERY TESTER Avoids dead battery and helps to extend battery life. Tests battery life by hot or cold, and detects overcharge. Applicable: 12 and 24-volt systems. JTC-1040 ANT FREEZE TESTER Avoid winter freeze up and summer boil over. Test all permanent (Ethylene Glycol) solution with radiator hot or cold. Two scales show freezing point of radiator solution and boiling point of summer coolant. JTC-1041 BATTERY HYDROMETER Test the battery in seconds. Color-coded float for easy reading.

JTC-1043 DELUXE BATTERY FILLER Large suction designed to suck easily and quickly.

JTC-1105 R-134a MANIFOLD Enclosed the 1107 adjustable coupler.

With sight glasses High pressure: 0 ~ 500psi 0 ~ 35kg/cm 2 Low pressure: 0 ~ 350psi -1

2 JTC-1043 DELUXE BATTERY FILLER Large suction designed to suck easily and quickly. For battery fuller or any other liquid. JTC-1105 R-134a MANIFOLD Enclosed the 1107 adjustable coupler. R-137a sight glass manifold with three 60"colorcoded hoses. With sight glasses High pressure: 0 ~ 500psi 0 ~ 35kg/cm 2 Low pressure: 0 ~ 350psi -1 ~ 24.5kg/cm 2 Vacuum: 0 ~ 76in/Hg JTC-1107 ADJUSTABLE QUICK COUPLER SET Enclosed the high side and low side coupler. The valve core puller is adjustable to fit the different valve core.

3 JTC-1134 ADAPTERS (VOLVO) Applicable: Volvo model for high side JTC-1137 QUICK COUPLER SET Enclosed the high side and low side coupler. Straight design suitable for the confined space. JTC-1138 VALVE CORE REMOVER Designed for removing valve coves in air condition system. Spec: R-12 / R-134a

system. Capacity: 1/4 oz. (7.5ml) to 2 oz.

4 JTC-1139 VALVE CORE REMOVER Designed for removing valve coves in air condition system. Spec: R-134a / R-134a Extend JTC-1153 SCALE INJECTOR Distinctive design with scale to inject the dye and pack oil for R134a and R12 system. Capacity: 1/4 oz. (7.5ml) to 2 oz. (60ml) JTC-1242 SPARK PLUG WIRE PLIERS Length: 200mml Small design is good to use in a narrow space In order to fit the angle of the electric wire, the head of the remover uses a special curve design, special design on the head of the remover is holding the electric wire tightly.

JTC-1248 ELECTRIC CIRCUIT TESTER Voltage: 6-24dcv Wire

The automatic power failure will start when voltage is over

This tool also can test the positive and negative voltage.

wiring harnesses. Polarity test cables and sockets.

JTC-1249 CORDLESS CIRCUIT TESTER Sharp probe tip covered

faster and easier. Check range: 6-12, 24v.

5 JTC-1248 ELECTRIC CIRCUIT TESTER Voltage: 6-24dcv Wire length: 4.5mt 8A safety gear inside. The automatic power failure will start when voltage is over the limit. This tool also can test the positive and negative voltage. Tests continuity in switches, relays, diodes and fuses, and wiring harnesses. Polarity test cables and sockets. Find short circuits and bad earths fast. JTC-1249 CORDLESS CIRCUIT TESTER Sharp probe tip covered with brass protection cap, check function of car lights faster and easier. Check range: 6-12, 24v. JTC-1260 A/C SPRING LOCK COUPLING TOOLS Distinctive design for removing the spring lock coupling in A/C system. Two tools in a set for the distinct size of coupling. Applicable: Toyota after 2000.

JTC-1301 RADIO REMOVE TOOL KIT Applicable: Mercedes, BMW, VW, Audi, Ford, as well as

6 JTC-1261 METAL CASE BATTERY BRUSH Designed for cleaning the battery terminals. Can use on both sides. JTC-1301 RADIO REMOVE TOOL KIT Applicable: Mercedes, BMW, VW, Audi, Ford, as well as American cars. Total number of items: 10 pcs JTC-1354 FIN STRAIGHTENING TOOL Made of stainless steel. Special design to clean and straighten the evaporator fin.

JTC-1357 R134a & R12 SIDE CAN TAP Distinctive design to open the cans from the side for easy charging.

Double outlet threads: 1/2" ACME for R-134a 1/4" 20T for R-12 JTC-1358 DISCONNECTION TOOL SET All the disconnect tool you need to

Contents: Spring locking tool "3/8" (red), 1/2" (blue), 5/8" (black), 3/4" (white).

FORD / GM quick disconnect tool: 1/2" (black). JTC-1438 MULTI PURPOSE CONNECTOR SET Various male/female connectors.

7 JTC-1357 R134a & R12 SIDE CAN TAP Distinctive design to open the cans from the side for easy charging. With 3 adjustments for all kinds service cans. Double outlet threads: 1/2" ACME for R-134a 1/4" 20T for R-12 JTC-1358 DISCONNECTION TOOL SET All the disconnect tool you need to work with spring locking coupling, fuel line, and transmission cooler line. Contents: Spring locking tool "3/8" (red), 1/2" (blue), 5/8" (black), 3/4" (white). Fuel line disconnect tool: 3/8" (yellow), 1/2" (green). Fuel line fitting disconnect tool: 5/16" (gray), 3/8" (cyan). FORD / GM quick disconnect tool: 1/2" (black). JTC-1438 MULTI PURPOSE CONNECTOR SET Various male/female connectors. It is a perfect circuit checking tool. You can use it to adjust and check the problem of car rapidly and accurately. Contents: 5KΩPotentiometer (Variable Resister) x 2 LED Stroboscope x 2 Various automotive flat terminals x 48 Various automotive circular terminals x 24 Acicular Probe x 4 Probe x 2 1 to 2 connector x 2 Alligator clip x2 1 to 1 connector x 4 SRS connector x2

JTC-1507 COIN TYPE SPARK PLUG GAUGE Testing range: 0.6 ~ 2.

100in JTC-1529 TERMINAL TOOL SET Contains 12 pieces which

Use for installing and removing the terminal by most cars.

compressor crankshaft pulley and install/remove centre screws

8 JTC-1507 COIN TYPE SPARK PLUG GAUGE Testing range: 0.6 ~ 2.4mm ~ 0.100in JTC-1529 TERMINAL TOOL SET Contains 12 pieces which specifications are various. Use for installing and removing the terminal by most cars. JTC-1551 COMPRESSOR CRANKSHAFT PULLEY WRENCH To fix A/C compressor crankshaft pulley and install/remove centre screws conveniently. Adjustable three-stud design for GM R-4 compressors. Has applications on some GM, Warner, Pitts and Ogura clutches. Size of three studs: 3.6, 8.0mm.

JTC-1609 A/C COMPRESSOR CLUTCH REMOVER KIT Replace clutches found on FS6, C171, 6P and

And compressors of Sanden SD505, 507, 508, 510, 575, 708 and 709.

JTC-1633 SPARK PLUG WIRE PLIERS The spark plug wire pliers are specially designed for removing

Good insulated handle and the grooves avoid any sliding down in operation, especially on

9 JTC-1609 A/C COMPRESSOR CLUTCH REMOVER KIT Replace clutches found on FS6, C171, 6P and 148-computer. GM R4 and R6, HR-6, DA-6 and V5 A/C compressors. And compressors of Sanden SD505, 507, 508, 510, 575, 708 and and 3-hole puller plate fits most clutches, the mechanical force does the pulling job. JTC-1633 SPARK PLUG WIRE PLIERS The spark plug wire pliers are specially designed for removing hard to reach high voltage lean wire. Good insulated handle and the grooves avoid any sliding down in operation, especially on Mercedes-Benz. Length: 220mm. JTC-1704 ELECTRIC CIRCUIT TESTER Power on type tests 6,12 and 24-volt circuits. For wire breaks, short, fuses, lamps, relays armatures, etc. 75mm inspection probe with point cover. 120cm long 16# wire with alligator clip.

JTC-1827 A/C, FUEL LINE DISCONNECT TOOL SET Easily

JTC-1834 A/C SPRING LOCK COUPLING TOOLS Used on 1981

10 JTC-1827 A/C, FUEL LINE DISCONNECT TOOL SET Easily disconnect air conditioning lines and quickly connect fuel lines. Size include: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8". JTC-1834 A/C SPRING LOCK COUPLING TOOLS Used on 1981 the current Ford cars and pickups having spring lock connection on the A/C system. For 3/8", 1/2", 5/8" and 3/4" couplers. JTC-3205 CRIMPING TOOL Applicable: Use with the automotive terminals and open barrel terminals

JTC-4056 SPECIAL LIGHT BULB PLIERS Special pliers for installing and removing wedge base

bulb in blower control switch on VW Passat 1996, seat Leon bulb in ambient air switch on OPEL

Blades made of special steel with plastic protective caps, pliers with solid plastic body.

car. Applicable: VW, AUDI, Mercedes Benz, Skoda, BMW, FORD.

11 JTC-4056 SPECIAL LIGHT BULB PLIERS Special pliers for installing and removing wedge base bulbs, e.g. bulb in blower control switch on VW Passat 1996, seat Leon bulb in ambient air switch on OPEL Astra F, MERCEDES-BENZ and RENAULT passenger cars. Blades made of special steel with plastic protective caps, pliers with solid plastic body. JTC PCS RADIO REMOVAL TOOL SET Universal tool for installing and removing radio on car. Applicable: VW, AUDI, Mercedes Benz, Skoda, BMW, FORD. JTC PCS RADIO REMOVAL TOOL SET Universal tool for installing and removing radio on car. Applicable: BENZ, BMW, FIAT, OPEL, VW, AUDI, FORD, SKODA, PORSCHE, etc. Applicable radio brand: KENWOOD, SONY, PIONEER, PANASONIC, CLARION, BLAUPUNKE, BECKER, etc.

JTC-4088 R-1234yf QUICK COUPLER SET For the new system R-1234yf. Enclosed the high side and low side couplers. The valve core puller is adjustable. Special designed for high pressure system.

This prevents the need to disconnect batteries result in the loss of stereo and other memories. Product dimension: 50 x 30 x 110mm. Max.

3ms Max Surge Capability: 1500W at 1ms JTC-4195 10 PCS A/C, FUEL LINE DISCONNECT TOOL SET (ELBOW) For separating quick disconnect fittings on fuel and cooler lines.

12 JTC-4088 R-1234yf QUICK COUPLER SET For the new system R-1234yf. Enclosed the high side and low side couplers. The valve core puller is adjustable. Special designed for high pressure system. JTC V / 24V SURGE PROTECTOR Provides protection against electrical devices from electrical surges and spikes generated by welding units. This prevents the need to disconnect batteries result in the loss of stereo and other memories. Product dimension: 50 x 30 x 110mm. Max. Input Voltage: DC 35V Power Cord: red/black, 450mm(L), 10AWG Suitable for DC 12V, DC24V lead-acid batteries. Input Voltage: DC12V or DC24V Peak forward Surge current: 200-amp at 8.3ms Max Surge Capability: 1500W at 1ms JTC PCS A/C, FUEL LINE DISCONNECT TOOL SET (ELBOW) For separating quick disconnect fittings on fuel and cooler lines. Unique offset design allows for access in confined or obstructed areas. Easy, one-handed operation. Material: Plastic. Contents: JTC (Dark Grey) Size: 1/2" JTC (Blue) Size: 5/8" JTC (Black) Size: 3/4" JTC (Silver) Size: 7/8" JTC (Red) Size: 5/16" JTC (Gold) Size: 3/8" JTC (Jacinth) Size: 3/16" JTC (Purple) Size: 3/8" JTC (Orange) Size:1/2" JTC (Light Green) Size:1/2"

JTC-4196 LED HEAVY DUTY ELECTRIC CIRCUIT TESTER Dual color LED indicates red for power (high) and

8m) long heavy-duty 18-gauge dual leads with battery clips and spring strain relief.

black The probe made from stainless steel for easier testing.

13 JTC-4196 LED HEAVY DUTY ELECTRIC CIRCUIT TESTER Dual color LED indicates red for power (high) and green for ground (low). Heavy-duty probe. 6'(1.8m) long heavy-duty 18-gauge dual leads with battery clips and spring strain relief. High-impact plastic body. High impedance tester protects computer circuitry. Services 6, 12, 24 Volt systems. Contents: JTC-4237 LED CONNECTOR TESTING SET 1 pc LED testing light 2 pcs testing probes red & black The probe made from stainless steel for easier testing. The LED shows yellow light when connecting with positive pole and shows red light for negative pole. JTC-4317 SIMPLE TYPE A/C SYSTEM TESTING ADAPTERS SET Specially designed for various A/C system fitting and tube from 1/4" to 7/8". Contents 2 clamps with gaskets 3/8", 1/2", 5/8", 3/4" / each 2 pcs.

JTC-4446 CURRENT LEAKING DETECT KIT JTC-4499 REFRIGERANT MANIFOLD GAUGE WITH MAGNETIC BELT JTC-4534 RELAY PLIERS Check the current

Connecting method: 1. Use the test clamp to connect with the car battery. 2. Use the OBD2 test clamp to connect to the backup battery.

(This method can be a power supply when you change the battery.) Max Load: DC32V/20A. Measurement Range: 0.01A ~ 19.

fuse x 1 Patent magnetic belt designed, can easily mounting on compatible surface or hook on non-magnetic surface.

Applicable for refrigerant R12, R22, R134A, and R1234yf.

Vacuum: 0~-30inHg/ 0~-76 cm/hg. Hose size: 60" length black hose, Red, Blue and Yellow nuts at the front for discrimination.

14 JTC-4446 CURRENT LEAKING DETECT KIT JTC-4499 REFRIGERANT MANIFOLD GAUGE WITH MAGNETIC BELT JTC-4534 RELAY PLIERS Check the current leaking without losing computer memory. Provide a safe and quick way to detect the leakage or consumption of the electricity on the car. Connecting method: 1. Use the test clamp to connect with the car battery. 2. Use the OBD2 test clamp to connect to the backup battery. Disconnect the negative battery terminal from the car battery to begin the test. (This method can be a power supply when you change the battery.) Max Load: DC32V/20A. Measurement Range: 0.01A ~ 19.99A Contents: TERMINAL CURRENT CLAMP x 1 OBD2-CURRENT CLAMP x 1 Current tester x 1 Fuse x 2 Puller of blade fuse x 1 Puller of mini fuse x 1 Patent magnetic belt designed, can easily mounting on compatible surface or hook on non-magnetic surface. Window type integrated aluminum frame, provide complete fit and trouble-free operation. Applicable for refrigerant R12, R22, R134A, and R1234yf. Gauge size: 80mm dimension with protective rubber cover High Pressure: 0-500psi/ 0-35 kg/cm² Low pressure: 0-350psi/ 0-24 kg/cm² Vacuum: 0~-30inHg/ 0~-76 cm/hg. Hose size: 60" length black hose, Red, Blue and Yellow nuts at the front for discrimination. 600psi working pressure & 3000psi burst pressure. With a bearing at the bottom of the coupler, the hose will not be released while shaking. Optional couplers for different refrigerant. Use for removing the electrical relays on most vehicles. Specially designed handle and tips for narrow space usage. The tips of the pliers are angled to fit slots or the edge of relay cover.

JTC-4551 INFRARED THERMOMETER (ECONOMY) Same function as JTC-1407 Applicable range: -20 ~ 320 C (-4 ~ 608 F) JTC-4565 DUAL

By using this tool can prevent damage to the tube, especially in narrow space.

JTC-4608 DIGITAL BATTERY TESTER Display: 3 Led (Green, Yellow, Red). No internal battery. Test leads: 31in./80cm.

15 JTC-4551 INFRARED THERMOMETER (ECONOMY) Same function as JTC-1407 Applicable range: -20 ~ 320 C (-4 ~ 608 F) JTC-4565 DUAL ANGLE BRASS LINE BENDING PLIERS Special dual-purpose design, capable for bending 3/16" and 1/4" OD tube. By using this tool can prevent damage to the tube, especially in narrow space. Specially designed handle and unique head keeps the handle in line with the tubing for proper leverage, even during work. JTC-4608 DIGITAL BATTERY TESTER Display: 3 Led (Green, Yellow, Red). No internal battery. Test leads: 31in./80cm. Application: 12V battery. Operating range: 200 ~ 1200CCA (SAE) Rating system: SAE, DIN, EN, INE, CA Test discharged battery: Down to 7V Voltmeter: 7V ~ 15V Tolerance: CCA: < +/- 10% Resolution: 1 CCA

JTC-4609 DIGITAL BATTERY TESTER WITH PRINTER Backlit display: 2 lines 16 characters LCD. Thermal printer built inside. Printing paper width: 37mm. Test code function can Be added. Test leads: 31in.

Operating range: 40~2000CCA(SAE) Rating system: SAE, DIN, EN, IEC, JIS (Battery type No.) Test discharged batteries: Down to 1.5V Voltmeter: 1.5V ~ 30V Tolerance: CCA: < +/- 15%, +/- 0.

16 JTC-4609 DIGITAL BATTERY TESTER WITH PRINTER Backlit display: 2 lines 16 characters LCD. Thermal printer built inside. Printing paper width: 37mm. Test code function can Be added. Test leads: 31in./80cm. Software includes: 7 languages: English, French, Spanish, Germany, Italian, Portuguese, Japanese. Application: 6V & 12V batteries. Operating range: 40~2000CCA(SAE) Rating system: SAE, DIN, EN, IEC, JIS (Battery type No.) Test discharged batteries: Down to 1.5V Voltmeter: 1.5V ~ 30V Tolerance: CCA: < +/- 15%, +/- 0.05V Resolution: 1 CCA JTC-4610 DIGITAL BATTERY / CHARGING / STARTING SYSTEM ANALYZER WITH PRINTER Backlit display: 4 lines 16 characters. LCD with adjustable brightness. Thermal printer built inside. Printing paper width: 50mm. Date/time function. Test leads: 31in./80cm. Software includes: 9 languages: English, French, Spanish, Germany, Italian, Portuguese, Japanese, Chinese (T/S). Application: 6V & 12V batteries, 12V & 24V charging system Operating range: 40 ~ 2000CCA (SAE) Rating system: SAE, DIN, EN, IEC, JIS (battery type No.) Test discharged battery: Down to 1.5V Voltmeter: 1.5V ~ 30V Tolerance: CCA: < +/- 15%, +/- 0.05V Resolution: 1 CCA JTC PCS A/C DISCONNECTION TOOL SET All the disconnection tool you need to work with spring locking coupling, fuel line, and transmission cooler lines. Contents: Aluminum disconnect tool: 1/4" (black), 5/16" (red), 3/8" (yellow), 1/2" (blue). Two ends disconnect tool: 5/16" ~ 3/8". Long disconnect tool: 1/2". Round disconnect tool: 1/2". Two-point disconnect tool and rubber cap x 4.

JTC-4688 23 PCS TERMINAL RELEASE TOOL SET Distinctive design to release terminals from the plastic connectors without

JTC-4790 ELECTRIC TEST CONNECTOR SET Economic type connector set are designing for car factory demand.

Contents: 1 pc 5kΩ Potentiometer (Variable resister) 2 pcs LED stroboscope 1 pc Wire checking clips 6 pcs Various

connector JTC-4801 EXTRA LONG HIGH SIDE QUICK COUPLER Total length: 85mm; O.D.: φ 26mm The valve core puller is adjustable to fit the different valve core.

17 JTC PCS TERMINAL RELEASE TOOL SET Distinctive design to release terminals from the plastic connectors without damaging either. Release terminals on most body wiring connectors. Applicable: suitable for most vehicles. JTC-4790 ELECTRIC TEST CONNECTOR SET Economic type connector set are designing for car factory demand. You can use it nimble on the adjustment and assistant the technician checking the car problem rapidly and accurately. Contents: 1 pc 5kΩ Potentiometer (Variable resister) 2 pcs LED stroboscope 1 pc Wire checking clips 6 pcs Various automotive flat terminals 2 pcs Probe 1 pc SRS connector 2 pcs Alligator clip 4 pcs Acicular probe 4 pcs 1 to 1 connector JTC-4801 EXTRA LONG HIGH SIDE QUICK COUPLER Total length: 85mm; O.D.: φ 26mm The valve core puller is adjustable to fit the different valve core. Special extra-long design for narrow space or deep hole. Applicable: BMW 2004 later, VOLVO S series and many new models.

JTC-4870 ELECTRIC CIRCUIT TESTER (GENERAL & HYBRID CAR) Compatible with current 12V system plus

Automatic voltage identification with blue for 12V and red for 42V systems.

New crystal-clear handle provides 360 visibility, even in bright light.

Easily insert and remove hard-to-reach spark plugs with the flexible shaft tool.

Installing: use it to insert spark plugs into cylinder grooves, and adjust it for installation.

18 JTC-4870 ELECTRIC CIRCUIT TESTER (GENERAL & HYBRID CAR) Compatible with current 12V system plus newer 42V system. Safe for low current circuits since tester only draws 3 milliamps at 12V. Automatic voltage identification with blue for 12V and red for 42V systems. Two super-bright LED's for visibility under all conditions. New crystal-clear handle provides 360 visibility, even in bright light. JTC-4872 RUBBER SPARK PLUG REMOVER / INSTALLER Flexible shaft permits access from many angles. Easily insert and remove hard-to-reach spark plugs with the flexible shaft tool. Removing: use it to take out spark plugs from deep hole. Installing: use it to insert spark plugs into cylinder grooves, and adjust it for installation. Length: 330 mm JTC IN 1 CRIMPING TOOL Applicable: Wire cutter/ insulated terminals crimp/ screw cutter/ Wire stripper/ open barrel terminal. Size: Total length: 230mm. Width: 4.0 mm thickness. Material: Carbon steel HRC:48 ~ 53.

JTC-5616 TERMINAL CRIMPING TOOL Spec: AWG 22-18 / 16-14 /

5 / 4-6mm 2 Applicable: INTER-LOCKING & NON-INSULATED

4-6mm 2 Applicable: FOR INSULATED TERMINAL JTC-5621 AUTOMATIC

precision machines and HRC55-60 blade cuts wire fast and

0mm 2 ). For insulated terminals: AWG 22-10 (0.5 ~ 6.0mm 2 ). For non-insulated terminals: AWG 22-10 (0.

19 JTC-5616 TERMINAL CRIMPING TOOL Spec: AWG / / DIN / / 4-6mm 2 Applicable: INTER-LOCKING & NON-INSULATED JTC-5617 TERMINAL CRIMPING TOOL Spec: AWG / / DIN / / 4-6mm 2 Applicable: FOR INSULATED TERMINAL JTC-5621 AUTOMATIC WIRE STRIPPER & CRIMPER The easy stripper cutters are made by precision machines and HRC55-60 blade cuts wire fast and smoothly. Applicable: Stripper range: AWG (0.2 ~ 6.0mm 2 ). For insulated terminals: AWG (0.5 ~ 6.0mm 2 ). For non-insulated terminals: AWG (0.5 ~ 6.0mm 2 ). For auto ignition terminals: 7-8mm.

JTC-5622 TIE GUN Fasten and automatic cut ties with

Applicable: Tie thickness up to 1.6mm. Tie width from 2.

JTC-5629 BATTERY TERMINAL CRIMPING TOOL Specially designed

terminal ends. Applicable: Terminal size from 6ga. To 4/0.

20 JTC-5622 TIE GUN Fasten and automatic cut ties with adjustable bundling pressure. Applicable: Tie thickness up to 1.6mm. Tie width from 2.2 to 4.8mm. JTC-5629 BATTERY TERMINAL CRIMPING TOOL Specially designed to provide a better way to prevent over crimping and a neat clean appearance. It's essential tool for replacing or repairing battery cable terminal ends. Applicable: Terminal size from 6ga. To 4/0. JTC-5632 TUBE CUTTER & FLARING TOOL Contents: Tube cutter: 1/8" ~ 1-1/8". Flaring tool: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", and 5/8". Another kit JTC-5632M with metric size: 4, 6, 8, 10, 12, 14, 16mm.

JTC-1360A VALVE CORE REMOVER & INSTALLER TOOL KIT Service valve cores without losing the system charge.

installer JRA R134 valve core remover / installer Volvo and 8mm valve core remover / installer R134a H φ16

Adapter 1/4"M x 1/2" ACME F H14 Wrench 2 sides valve core Remover JTC-1409A FLUSH KIT Volume: 1L Flush

The cylinder is equipped with a top inlet fitting and a side outlet for connecting to compressed air lines.

21 JTC-1360A VALVE CORE REMOVER & INSTALLER TOOL KIT Service valve cores without losing the system charge. Unique design offers a locking device that holds the shaft in place while removing or installing the valve cores. Contents: Valve assembly Standard valve core remover / installer GM large bore valve core remover / installer JRA R134 valve core remover / installer Volvo and 8mm valve core remover / installer R134a H φ16 connector R134a L φ13 connector 5/16"FL swivel connector 1/4"FL swivel connector Adapter 1/4"M x 3/16"F Adapter 1/4"M x 1/2" ACME F H14 Wrench 2 sides valve core Remover JTC-1409A FLUSH KIT Volume: 1L Flush solvent performs all mechanical actions required to clean out contaminated systems. The cylinder is equipped with a top inlet fitting and a side outlet for connecting to compressed air lines. With a gun to control on /off. JTC-1719A AUTO COMPUTER MEMORY UNIT Maintains the memory of vehicle radios, clock & computer functions when battery is disconnected. Simply attach a 9-volt battery and plug the tool into cigarette lighter. Keeps settings up to 4 hours.

JTC-1720A ADJUSTABLE SPARK GAP TESTER JTC-4614B MULTI FUNCTIONAL BATTERY TESTER (12/24V) JTC-4726A OBD II

depends on difference types of car condition and adjust the different gaps.

The car factory chooses the appropriate coil depends on engine and ignition system.

Functions: Battery testing: 12V common Lead-Acid & AGM Battery Generator test, Starting test.

range: 100-1700 CCA(SAE) Tolerance: CCA: <± 10% <± 0.1V Rating system: CCA, DIN, EN, IEC, JIS.

To repeat the test, no safety concerns. Language: English, Chinese, etc.

22 JTC-1720A ADJUSTABLE SPARK GAP TESTER JTC-4614B MULTI FUNCTIONAL BATTERY TESTER (12/24V) JTC-4726A OBD II POWER SUPPLY ADAPTER Rapidly, accurately, safely, conveniently to judge the quality of ignition system, depends on difference types of car condition and adjust the different gaps. To judge the quality of coil according to spark color and distance. The car factory chooses the appropriate coil depends on engine and ignition system. The airtight design to prevent the high volts leakage. Functions: Battery testing: 12V common Lead-Acid & AGM Battery Generator test, Starting test. Backlit display: 60x32mm (64x12B LCD) Test leads: 100cm Voltmeter: 9-15 VDC (12V batteries) Operating range: CCA(SAE) Tolerance: CCA: <± 10% <± 0.1V Rating system: CCA, DIN, EN, IEC, JIS. Electronic logic test. To test through low-frequency signals without external load large battery tester. To repeat the test, no safety concerns. Language: English, Chinese, etc. But only one mode can be selected as you purchase. Special adapter to prevent lose any data from replacing the battery. Connect the adapter from battery to OBD-II plug for continue power supply. Optional power supplier: 112V battery 29V dry battery The adapter with 2 LEDs to show if the battery with enough. 9V: 12V:

Wire Piercing Guide Heavy Duty Circuit Tester 6, 12, 24 Volt Professional Circuit Tester 6, 12 Volt

Wire Piercing Guide Heavy Duty Circuit Tester 6, 12, 24 Volt Professional Circuit Tester 6, 12 Volt ELECTRICAL SERVICE Wire Piercing Guide 302003 n Quickly and easily guides tester probe into the centre of vehicle electrical wires n Eliminates stabbing of fingers when piercing wires n Holds the circuit