Mechatronics Design Workshop. Thomas Villgrattner Institute of Applied Mechanics Technische Universität München
|
|
- Marianna Lyons
- 5 years ago
- Views:
Transcription
1 Mechatronics Design Workshop Thomas Villgrattner Institute of Applied Mechanics Technische Universität München
2 Definition Mechatronics Mechanical Engineering [Mechatronics is]...the synergetic integration of mechanical engineering with electronic and intelligent computer control in the design and manufacturing of industrial products and processes. Mechatronics Harashima, F.; Tomizuka, M.; Fukuda, T.: Mechatronics What Is It, Why, and How? An Editorial. IEEE/ASME Transactions on Mechatronics 1 (1996) 1, pp. 1/4 2
3 Motivation Special aspects: Close collaboration of different disciplines Parallel procedure Increase productivity Development of highly integrated Systems: Deal with complex challenges Small package dimensions Elimination of components Low weight High dynamics Greater reliability 3
4 Selected Mechatronic Systems at AM TUM Mechatronics 4
5 Modular and Hierarchical modified from Lückel et al
6 Mechatronic System Bishop
7 Kinematic Scheme: Mechanics Direct/inverse kinematic Solution: 7
8 Mechanics CAD based development: Dynamic Simulation Model: 8
9 Actuators Huge amount of different principles and configurations Electrical motors DC motors Stepper motors Brushless (servo) motors Pneumatic actuators Hydraulic actuators Piezo actuators Shape memory alloys Electro active polymers Electrodynamic/electromagnetic actuators (voice coils)... Festo AG & Co. KG 2011 Physik Instrumente (PI) GmbH & Co. KG 2011 Maxon Motor AG 2011 Hytec Hydraulic OHG 2011 AM TUM
10 Actuators output capabilities Force/speed capabilities Force/displacement capabilities Force/positioning capabilities (closed loop) Power density (without energy generation) Plots taken from: Isermann R., Mecheatronic Systems Fundamentals, Springer
11 Sensors Huge amount of different principles and configurations Different control level require different sensors Incremental angle sensors Vision system (stereo cameras) Inertial measurement unit Absolute angle sensors Force torque sensors Limit switches Temperature sensors 11
12 Controller Aim: Design systems with predictable behaviors Open loop control Setvalue Controller Actuator Plant Actual value Closed loop control Setvalue - Controller Actuator Plant Actual value Sensor 12
13 Controller Overall task planning Task planning Raw target positions Visual servoing Path planning / solving redundancy Manipulator joint control 13
14 Man Machine Interface MMI/HMI allows people to interact with technical systems Input Switches Keyboard Gaze direction... Output Indicator lights Buzzers Displays... Psychology Ergonomic Well structured Usability... Siemens AG 2011 Brother Industries Ltd 2011 Apple Inc
15 Mechatronic System Modeling simulation optimization development validation 15
16 Mechatronics: Summary Allows the development of highly integrated systems Requires a close collaboration of different disciplines Its main components are Mechanics Actuators Sensors Control HMI Procedure: modeling, simulation, optimization, development, and validation 16
17 Selected Literature Bishop, R. (ed.): Mechatronics: An Introduction, CRC Press, 2005 Isermann, R.: Mechatronic Systems: Fundamentals, Springer, 2003 VDI: Design methodology for mechatronic systems (VDI 2206), VDI- Gesellschaft Produkt- und Prozessgestaltung, 2004 Siciliano, B. & Khatib, O.: Springer Handbook of Robotics, Springer, 2008 Föllinger, O.: Regelungstechnik. Einführung in die Methoden und ihre Anwendung, Hüthig, 1994, in german Dix, A.; Finlay, J.; Abowd, G. & Beale, R.: Human-Computer Interaction Prentice Hall,
BASIC MECHATRONICS ENGINEERING
MBEYA UNIVERSITY OF SCIENCE AND TECHNOLOGY Lecture Summary on BASIC MECHATRONICS ENGINEERING NTA - 4 Mechatronics Engineering 2016 Page 1 INTRODUCTION TO MECHATRONICS Mechatronics is the field of study
More informationRobotic Wheel Loading Process in Automotive Manufacturing Automation
The 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems October 11-15, 2009 St. Louis, USA Robotic Wheel Loading Process in Automotive Manufacturing Automation Heping Chen, William
More informationGenerator Speed Control Utilizing Hydraulic Displacement Units in a Constant Pressure Grid for Mobile Electrical Systems
Group 10 - Mobile Hydraulics Paper 10-5 199 Generator Speed Control Utilizing Hydraulic Displacement Units in a Constant Pressure Grid for Mobile Electrical Systems Thomas Dötschel, Michael Deeken, Dr.-Ing.
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 1.1 Motivation INTRODUCTION Permanent Magnet Brushless DC (PMBLDC) motor is increasingly used in automotive, industrial, and household products because of its high efficiency, high torque,
More informationINTRODUCTION TO MECHATRONICS PRASHANT AMBADEKAR
INTRODUCTION TO MECHATRONICS PRASHANT AMBADEKAR WHAT IS CONTROL? Control is the process of altering, manually or automatically, the performance of a system to a desired one. WHY CONTROL? Because systems
More informationSiemens Centre of Excellence Course Plan
Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1 Table of Contents Labs in the Siemens COE... 3 Courses offered
More informationInternational Journal of Innovations in Engineering and Science. Control Systems with Mechatronics Principles: The Concept
International Journal of Innovations in and Science INNOVATIVE RESEARCH FOR DEVELOPMENT Website: www.ijiesonline.org e-issn: 2616 1052 Volume 1, Issue 1 August, 2018 Control Systems with Mechatronics Principles:
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationModeling and Optimization of a Linear Electromagnetic Piston Pump
Fluid Power Innovation & Research Conference Minneapolis, MN October 10 12, 2016 ing and Optimization of a Linear Electromagnetic Piston Pump Paul Hogan, MS Student Mechanical Engineering, University of
More informationENGINEERING FOR HUMANS STPA ANALYSIS OF AN AUTOMATED PARKING SYSTEM
ENGINEERING FOR HUMANS STPA ANALYSIS OF AN AUTOMATED PARKING SYSTEM Massachusetts Institute of Technology John Thomas Megan France General Motors Charles A. Green Mark A. Vernacchia Padma Sundaram Joseph
More informationVariable Valve Drive From the Concept to Series Approval
Variable Valve Drive From the Concept to Series Approval New vehicles are subject to ever more stringent limits in consumption cycles and emissions. At the same time, requirements in terms of engine performance,
More informationMultibody Dynamics Simulations with Abaqus from SIMULIA
Multibody Dynamics Simulations with Abaqus from SIMULIA 8.5.2008 Martin Kuessner Martin.KUESSNER@3ds.com Abaqus Deutschland GmbH 2 One Company, First Class Brands 3D MCAD Virtual Product Virtual Testing
More informationINCREASING ENERGY EFFICIENCY BY MODEL BASED DESIGN
INCREASING ENERGY EFFICIENCY BY MODEL BASED DESIGN GREGORY PINTE THE MATHWORKS CONFERENCE 2015 EINDHOVEN 23/06/2015 FLANDERS MAKE Strategic Research Center for the manufacturing industry Integrating the
More informationVehicle Steering Control with Human-in-the-Loop
Vehicle Steering Control with Human-in-the-Loop Mengzhe Huang, Weinan Gao, Zhong-Ping Jiang(IEEE/IFAC Fellow) Email: {m.huang, weinan.gao, zjiang}@nyu.edu} Control and Networks Lab, Department of Electrical
More informationUTILIZATION OF PNEUMATIC ACTUATOR
UTILIZATION OF PNEUMATIC ACTUATOR Rupesh Parkhi 1 UG Student, Department of Mech, G.H.Raisoni College of Engineering, Nagpur, RTMN University ABSTRACT The pneumatic actuator represents the main force control
More informationFluid Power Systems & Control
Fluid Power Systems & Control K. Craig 1 Fluid Power Fluid Properties Fluid Mechanics Fundamentals Systems Dynamic System Modeling & Analysis Fundamentals Hydraulic Components: Valves, Pumps, Actuators
More informationDesign of pneumatic proportional flow valve type 5/3
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Design of pneumatic proportional flow valve type 5/3 To cite this article: P A Laski et al 2017 IOP Conf. Ser.: Mater. Sci. Eng.
More informationTraffic Operations with Connected and Automated Vehicles
Traffic Operations with Connected and Automated Vehicles Xianfeng (Terry) Yang Assistant Professor Department of Civil, Construction, and Environmental Engineering San Diego State University (619) 594-1934;
More informationITR. INDUSTRIAL SOLUTIONS From World to Your Workplace ITR AUTOMATION GROUP
ITR INDUSTRIAL SOLUTIONS From World to Your Workplace ITR AUTOMATION GROUP ITR AUTOMATION GROUP We Bring Your Imaginations to Reality About us An energetic team of professionals established ITR AUTOMATION
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control
More informationInternational journal of advanced production and industrial engineering. Non-Conventional Actuation Mechanisms used in Mechatronic systems
Available online at www.ijapie.org International journal of advanced production and industrial engineering IJAPIE-2018-01-122, Vol 3 (1), 05-10 IJAPIE Connecting Science & Technology with Management. A
More informationELECTROPNEUMATIC POSITIONING SYSTEM CONTROL WITH THE LEGENDARY LOGO! PLC
ELECTROPNEUMATIC POSITIONING SYSTEM CONTROL WITH THE LEGENDARY LOGO! PLC G. Kozoris Dept. of Automation Engineering, PUAS, Athens, Greece M. Papoutsidakis Dept. of Automation Engineering, PUAS, Athens,
More informationR-SERIES MULTI-AXIS INDUSTRIAL ROBOTS
Automation Solutions R-SERIES MULTI-AXIS INDUSTRIAL ROBOTS COMPACT MULTI-AXIS INDUSTRIAL ROBOTS FOR COMPLEX PROCESSING TASKS Reduce Manufacturing Costs Improve Production Time Increase Throughput Engineering
More informationAutomated Driving - Object Perception at 120 KPH Chris Mansley
IROS 2014: Robots in Clutter Workshop Automated Driving - Object Perception at 120 KPH Chris Mansley 1 Road safety influence of driver assistance 100% Installation rates / road fatalities in Germany 80%
More informationIntroduction to Internet of Things Prof. Sudip Misra Department of Computer Science & Engineering Indian Institute of Technology, Kharagpur
Introduction to Internet of Things Prof. Sudip Misra Department of Computer Science & Engineering Indian Institute of Technology, Kharagpur Lecture 04 Actuation So, this particular lecture is on actuation.
More informationPressure Control of a Nonlinear System with a Linear-PMSM and a Standard Inverter
Pressure Control of a Nonlinear System with a Linear-PMSM and a Standard Inverter Christian Junge 1, Florian Senicar 2, Ralf Wegener 1, Member IEEE, Stefan Soter 1,2, Member IEEE 1 Electrical Machines
More informationSTPA in Automotive Domain Advanced Tutorial
www.uni-stuttgart.de The Second European STAMP Workshop 2014 STPA in Automotive Domain Advanced Tutorial Asim Abdulkhaleq, Ph.D Student Institute of Software Technology University of Stuttgart, Germany
More informationWith digital twin to the Factory of the Future Part I
With digital twin to the Factory of the Future Part I Bosch Rexroth and Dassault Systèmes will use a modular assembly line to show how the Factory of the Future can be efficiently planned, implemented
More informationDEVELOPMENT ENVIRONMENT FOR HAPTIC FEEDBACK DEVICE ON MOBILE AGRICULTURAL EQUIPMENT
Sustainable Construction and Design 211 DEVELOPMENT ENVIRONMENT FOR HAPTIC FEEDBACK DEVICE ON MOBILE AGRICULTURAL EQUIPMENT L. Jánosi, J. Kis Institute for Mechanical Engineering Technology, Faculty of
More informationTurbo boost. ACTUS is ABB s new simulation software for large turbocharged combustion engines
Turbo boost ACTUS is ABB s new simulation software for large turbocharged combustion engines THOMAS BÖHME, ROMAN MÖLLER, HERVÉ MARTIN The performance of turbocharged combustion engines depends heavily
More informationIntegration of Lubrication and Cooling System GT-SUITE Models
Integration of Lubrication and Cooling System GT-SUITE Models North American GT Conference 2017 Presenter: Robert Fry Agenda Introduction Cooling System Model Development Lubrication System Model Development
More informationLMS Imagine.Lab AMESim Ground Loads and Flight Controls
LMS Imagine.Lab AMESim Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls helps designers from the aerospace industry to
More informationAlternative Intelligent Adaptable
Superior Clamping and Gripping Alternative Intelligent Adaptable Henrik A. Schunk, Kristina I. Schunk und Heinz-Dieter Schunk Top Performance in the Team SCHUNK is the world s No. 1 for clamping technology
More informationRobust design of active systems an approach to considering disturbances in the selection of sensors
Robust design of active systems an approach to considering disturbances in the selection of sensors ISoRD 2014 T. Freund, J. Würtenberger, S. Calmano, D. Hesse, H. Kloberdanz 22.08.2014 Fachbereich Maschinenbau
More informationDesign and Modeling of Fluid Power Systems ME 597/ABE 591
Systems ME 597/ABE 591 Dr. Monika Ivantysynova MAHA Professor Flud Power Systems MAHA Fluid Power Research Center Purdue University Systems Dr. Monika Ivantysynova, Maha Professor Fluid Power Systems Mivantys@purdue.edu
More informationKINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD
Jurnal Mekanikal June 2014, No 37, 16-25 KINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD Mohd Awaluddin A Rahman and Afandi Dzakaria Faculty of Mechanical Engineering, Universiti
More informationNovel Chassis Concept for Omnidirectional Driving Maneuvers
Novel Chassis Concept for Omnidirectional Driving Maneuvers Challenges in modelling suspensions with wheel individual steering system KIT The Research University in the Helmholtz Association www.kit.edu
More informationMechatronics Systems
Mechatronics Systems Mechatronics is that branch of engineering that deals with combined mechanical, electronic and software systems. The elements of mechatronics systems include sensors, actuators, microcontrollers
More informationAutomobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track
Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track These sessions are related to Body Engineering, Fire Safety, Human Factors, Noise and Vibration, Occupant Protection, Steering
More informationPrecise, flexible, efficient automation solutions for the semiconductor industry
Precise, flexible, efficient automation solutions for the semiconductor industry 3 Wafer Handling High rigidity, no overshoot, no backlash: Rexroth wafer handling solutions are designed for perfect balance
More informationHybrid Nanopositioning Systems with Piezo Actuators
Hybrid Nanopositioning Systems with Piezo Actuators Long Travel Ranges, Heavy Loads, and Exact Positioning Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page
More informationIMMUNITY INSPIRED DIAGNOSTICS AND PROGNOSTICS IN SYSTEMS OF INTERACTING DYNAMIC SUBSYSTEMS
NSF I-UCRC on Intelligent Maintenance Systems; Planning Workshop at the University of Texas; May 15, 2012, Austin, TX IMMUNITY INSPIRED DIAGNOSTICS AND PROGNOSTICS IN SYSTEMS OF INTERACTING DYNAMIC SUBSYSTEMS
More informationThe Systems Approach to Mechatronics Education
The Systems Approach to Mechatronics Education Marilyn Barger, FLATE (Florida Advanced Technological Education Center of Excellence) Dan Horine, Virginia Western Community College Protection notice / Copyright
More informationModeling and Optimization of a Linear Electromagnetic Piston Pump
Fluid Power Innovation & Research Conference Minneapolis, MN October 10 12, 2016 ing and Optimization of a Linear Electromagnetic Piston Pump Paul Hogan, MS Student Mechanical Engineering, University of
More informationModern Industrial Pneumatics. Design and Troubleshooting Industrial Pneumatics PN111 PN121
Modern Industrial Pneumatics Design and Troubleshooting Industrial Pneumatics PN111 PN121 Drives: Cylinders for different drive purposes Valves: Various valve types (pneumatically/electrically controlled,
More informationCURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) GANPAT UNIVERSITY
ANNEXURE - A CURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) Host Institute: GANPAT UNIVERSITY Contents of Basic Industrial Pneumatics -----------------------------------------------------------------------------------------------------------------
More informationSIP-adus Workshop A Traffic-based Method for Safety Impact Assessment of Road Vehicle Automation. Tokyo, 14 th November 2018
SIP-adus Workshop 2018 A Traffic-based Method for Safety Impact Assessment of Road Vehicle Automation Tokyo, 14 th November 2018 Dr.-Ing. Adrian Zlocki, Christian Rösener, M.Sc., Univ.-Prof. Dr.-Ing. Lutz
More informationOpenness Design modularity Outstanding Quality Fine positioning INGENIA MOTION CONTROL Motor control Engineered Solutions Complete Integration
Openness Design modularity Outstanding Quality Fine positioning INGENIA MOTION CONTROL Motor control Engineered Solutions Complete Integration Freedom to create Complete motion control Your partner in
More informationFluidic Stochastic Modular Robotics: Revisiting the System Design
Fluidic Stochastic Modular Robotics: Revisiting the System Design Viktor Zykov Hod Lipson Computational Synthesis Cornell University Grand Challenges in the Area of Self-Reconfigurable Modular Robots Self-repair
More informationControl of Mobile Robots
Control of Mobile Robots Introduction Prof. Luca Bascetta (luca.bascetta@polimi.it) Politecnico di Milano Dipartimento di Elettronica, Informazione e Bioingegneria Applications of mobile autonomous robots
More informationScaling industrial control technologies for food & beverage industry
ISAB/F&B Symp/20160226/Slide No. 1 National Symposium on Automation & Digital Transformation of Food & Beverage Industry 26 th & 27 th February 2016 Scaling industrial control technologies for food & beverage
More informationSome Thoughts on Simulations in Terramechanics
Some Thoughts on Simulations in Terramechanics J.Y. Wong Professor Emeritus and Distinguished Research Professor Carleton University and Vehicle Systems Development Corporation Ottawa, Canada Copyright
More informationHighly dynamic control of a test bench for highspeed train pantographs
PAGE 26 CUSTOMERS Highly dynamic control of a test bench for highspeed train pantographs Keeping Contact at 300 km/h Electric rail vehicles must never lose contact with the power supply, not even at the
More informationBioRob: A Really Lightweight and Safe Robot Arm for Mobile Human-Robot Interaction
BioRob: A Really Lightweight and Safe Robot Arm for Mobile Human-Robot Interaction Dipl.-Ing. Thomas Lens, Prof. Dr. Oskar von Stryk Technische Universität Darmstadt Department of Computer Science Simulation,
More informationEnhancing Wheelchair Mobility Through Dynamics Mimicking
Proceedings of the 3 rd International Conference Mechanical engineering and Mechatronics Prague, Czech Republic, August 14-15, 2014 Paper No. 65 Enhancing Wheelchair Mobility Through Dynamics Mimicking
More informationModeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt
Modeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt a. M. Institut für Verbrennungsmotoren und Kraftfahrwesen
More informationMAS601 Design, Modeling & Simulation
MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, 2017. Page: 1 MAS601 Design, Modeling & Simulation Hardware-In-the-Loop Simulation Bond Graph 20-Sim Siemens PLC ET200S G. Hovland
More informationOPENSTEERING PLATFORM
MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES OPENSTEERING PLATFORM FOR DEVELOPMENT OF ADVANCED STEERING FUNCTIONS, ADAS AND AUTONOMOUS VEHICLES 9th International Munich Chassis
More informationItems to specify: 4. Motor Speed Control. Head Unit. Radar. Steering Wheel Angle. ego vehicle speed control
Radar Steering Wheel Angle Motor Speed Control Head Unit target vehicle candidates, their velocity / acceleration target vehicle selection ego vehicle speed control system activation, status communication
More informationTHE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting
THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine
More informationTest Based Optimization and Evaluation of Energy Efficient Driving Behavior for Electric Vehicles
Test Based Optimization and Evaluation of Energy Efficient Driving Behavior for Electric Vehicles Bachelorarbeit Zur Erlangung des akademischen Grades Bachelor of Science (B.Sc.) im Studiengang Wirtschaftsingenieur
More informationIMPLEMENTATION OF A VEHICLE-IN-THE-LOOP DEVELOPMENT AND VALIDATION PLATFORM
F2010-C-177 IMPLEMENTATION OF A VEHICLE-IN-THE-LOOP DEVELOPMENT AND VALIDATION PLATFORM 1 Albers, Albert *, 1 Düser, Tobias 1 IPEK Institute of Product Engineering at Karlsruhe Institute of Technology
More informationInternational Journal of Scientific & Engineering Research, Volume 4, Issue 5, May ISSN
International Journal of Scientific & Engineering Research, Volume 4, Issue 5, May-2013 338 An efficient electro mechanical coupling of Parallel hybrid system using SCADA Harikrishnan 1, Dhanaselvam J
More informationPodium Engineering complete race cars, vehicle prototypes high performance hybrid/electric powertrain
Born in the firm belief that design quality, high project commitment and absolute respect of deadlines are key competitive factors for a consulting and engineering company, Podium Engineering is a dynamic
More informationHydraulic Drives: How to Combine Dynamics and Efficiency. Bert Brahmer,
Hydraulic Drives: How to Combine Dynamics and Efficiency Bert Brahmer, 2011-04-21 Contents 1. Introduction 2. Benefits of Hydraulics in Industrial Drives 3. Challenges for Hydraulics 4. HPPC: Highly Dynamic
More informationInnovation in Fluid Power. Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen
Innovation in Fluid Power Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen RWTH Aachen University Facts and Figures Established in 1870 9 faculties, 260
More informationFunctional Algorithm for Automated Pedestrian Collision Avoidance System
Functional Algorithm for Automated Pedestrian Collision Avoidance System Customer: Mr. David Agnew, Director Advanced Engineering of Mobis NA Sep 2016 Overview of Need: Autonomous or Highly Automated driving
More informationTorque Feedback Control of Dry Friction Clutches for a Dissipative Passive Haptic Interface
Torque Feedback Control of Dry Friction Clutches for a Dissipative Passive Haptic Interface Davin K. Swanson and Wayne J. Book George W. Woodruff School of Mechanical Engineering Georgia Institute of Technology
More informationDesigning cooperative interaction of automated vehicles with other road users
Designing cooperative interaction of automated vehicles with other road users Anna Schieben, interact Project Coordinator Marc Wilbrink Department of Automotive, German Aerospace Center (DLR) 9 May 208
More informationIMTS 2012 Valve Control
Pneumatic Control Mechanical Control IMTS 2012 Valve Control Ryan Hettinger Applications Engineer Festo Corporation Solenoid Control Fieldbus Control Integrated PLC Control IMTS 2012 Pneumatic Control
More informationAutomated Loop Winding Machine for Steering Coupling
Automated Loop Winding Machine for Steering Coupling Pranish Naoghare 1, Aquib Khatib 2, Zuber Pathan 3, Atul More 4 1,2,3,4Student,Dept. of Mechanical Engineering,, Maharashtra, India ---------------------------------------------------------------------***---------------------------------------------------------------------
More informationAdult Sized Humanoid Robot: Archie
Adult Sized Humanoid Robot: Archie Jacky Baltes 1, Chi Tai Cheng 1, M.C. Lau 1, Peter Kopacek 2, and John Anderson 1 1 Autonomous Agent Lab University of Manitoba Winnipeg, Manitoba Canada, R3T 2N2 j.baltes@cs.umanitoba.ca
More informationA Proposed Approach to Mechatronics Design and Implementation Education-Oriented Methodology
ISSN -177 (Paper) ISSN -871 (Online) A Proposed Approach to Mechatronics Design and Implementation Education-Oriented Methodology Farhan A. Salem Alpha center for Engineering Studies and Technology Researches,
More informationRB-Mel-03. SCITOS G5 Mobile Platform Complete Package
RB-Mel-03 SCITOS G5 Mobile Platform Complete Package A professional mobile platform, combining the advatages of an industrial robot with the flexibility of a research robot. Comes with Laser Range Finder
More informationMSI s #1 priority to exceed customer expectations starts with a #1 Product Line
460 Milford Parkway Milford OH, 45150 Apex Dynamics, Inc with over twenty years of accumulated manufacturing and marketing experience, plus the highest level of technical production capabilities, Apex
More informationStudy of a Mechatronic Valve Model for the Automotive Industry
Study of a Mechatronic Valve Model for the Automotive Industry Christian Meise 1, Peter Oehler 1, Stefan Breitschuh 2, Wolfgang Fey 1, Günter Schmitz 2 1 Continental Teves AG ohg 2 Aachen University of
More informationThe Positioning of Systems Powered by McKibben Type Muscles
The Positioning of Systems Powered by McKibben Type Muscles Wiktor Parandyk, Michał Ludwicki, Bartłomiej Zagrodny, and Jan Awrejcewicz Lodz University of Technology, Lodz, Poland Department of Automation,
More informationSimulation-Based Development of Industrial Robots Dr. Jonas Larsson Dr. Xiaolong Feng. ABB Corporate Research
Dr. Jonas Larsson Dr. Xiaolong Feng ABB Corporate Research Simulation-Based Development of Industrial Robots 2008-10-01 ABB AB, Corporate Research - 1 10/27/2008 Outline ABB Why Simulation-Based Development?
More informationComparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2012 Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured
More informationConversion of a Conventional Electric Automobile Into an Unmanned Ground Vehicle (UGV) University, Istanbul, Turkey. University, Istanbul, Turkey
Proceedings of the 2011 IEEE International Conference on Mechatronics April 13-15, 2011, Istanbul, Turkey Conversion of a Conventional Electric Automobile Into an Unmanned Ground Vehicle (UGV) Volkan Sezer
More informationTransportation. Actuators, Pedals and Sensors
Transportation Actuators, Pedals and Sensors Your Partner in Smart Solutions CTS Corporation is a global manufacturer of sensors, actuators and electronic components. Having served the automotive industry
More informationState-of-the-art architectures State-of-the-art testing Jürgen Schölzel, Siemens AG, Mobility Division
State-of-the-art architectures State-of-the-art testing Jürgen Schölzel, Siemens AG, Mobility Division siemens.com Not only operator control but also operational processes and headways and thus systems
More informationAdult Sized Humanoid Robot: Archie
Adult Sized Humanoid Robot: Archie Jacky Baltes 1, Chi Tai Cheng 1, M.C. Lau 1, Ahmad Byagowi 2, Peter Kopacek 2, and John Anderson 1 1 Autonomous Agent Lab University of Manitoba Winnipeg, Manitoba Canada,
More informationErgonomic assessment of the driving cabs of railway vehicles
Loughborough University Institutional Repository Ergonomic assessment of the driving cabs of railway vehicles This item was submitted to Loughborough University's Institutional Repository by the/an author.
More informationTORQUE-MOTORS. as Actuators in Intake and Exhaust System. SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz.
TORQUE-MOTORS as Actuators in Intake and Exhaust System SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz Tel.: +41 / 32-488 11 11 Fax: +41 / 32-488 11 00 info@sonceboz.com www.sonceboz.com as Actuators
More informationSchedule of Events. Mech 1751: Introduction to Mechatronics. What is an actuator? Electric Actuators and Drives. Actuators. Dr. Stefan B.
Schedule of Events Week Date Content Assignment Notes Mech 1751: Introduction to Mechatronics Actuators 1 2 3 4 5 6 7 8 9 09/3 16/3 23/3 30/3 6/4 20/4 27/4 4/5 11/5 Introduction Design Process System Modelling
More informationAn Innovative Approach
Traffic Flow Theory and its Applications in Urban Environments An Innovative Approach Presented by Dr. Jin Cao 30.01.18 1 Traffic issues in urban environments Pedestrian 30.01.18 Safety Environment 2 Traffic
More informationUse of Flow Network Modeling for the Design of an Intricate Cooling Manifold
Use of Flow Network Modeling for the Design of an Intricate Cooling Manifold Neeta Verma Teradyne, Inc. 880 Fox Lane San Jose, CA 94086 neeta.verma@teradyne.com ABSTRACT The automatic test equipment designed
More informationInventory Routing for Bike Sharing Systems
Inventory Routing for Bike Sharing Systems mobil.tum 2016 Transforming Urban Mobility Technische Universität München, June 6-7, 2016 Jan Brinkmann, Marlin W. Ulmer, Dirk C. Mattfeld Agenda Motivation Problem
More informationCRUSADER. A full vehicle integration facility. Crossfunctional unique systemtest approach driven by entire relationships
CRUSADER A full vehicle integration facility Crossfunctional unique systemtest approach driven by entire relationships An innovative vehicle-in-the-loop test bench We're talking about... CRUSADER an Unique
More informationScania complements testing by applying a system simulation approach
Automotive and transportation Using Simcenter Amesim enables truck and bus manufacturer to considerably reduce driveline modeling time Product Simcenter Business challenges Reduce truck and bus transmission
More informationREU: Improving Straight Line Travel in a Miniature Wheeled Robot
THE INSTITUTE FOR SYSTEMS RESEARCH ISR TECHNICAL REPORT 2013-12 REU: Improving Straight Line Travel in a Miniature Wheeled Robot Katie Gessler, Andrew Sabelhaus, Sarah Bergbreiter ISR develops, applies
More informationMULTI-POLE MODELING AND INTELLIGENT SIMULATION OF CONTROL VALVES OF FLUID POWER SYSTEMS (PART 2)
9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING" 24-26 April 2014, Tallinn, Estonia MULTI-POLE MODELING AND INTELLIGENT SIMULATION OF CONTROL VALVES OF FLUID POWER SYSTEMS (PART 2) Harf,
More informationPedals for commercial and special-purpose vehicles. Robust Electronically controlled Flexible installation.
Pedals for commercial and special-purpose vehicles Robust Electronically controlled Flexible installation www.vdo.com The future of mobility begins with the innovations of the present A passion for mobility
More informationIn recent years, multirotor helicopter type autonomous UAVs are being used for aerial photography and aerial survey. In addition, various
25 6 18 In recent years, multirotor helicopter type autonomous UAVs are being used for aerial photography and aerial survey. In addition, various applications such as buildings maintenance, security and
More informationArms, Legs, Wheels, Tracks and What Really Drives Them: Effectors and Actuators. By: J. Islam & Tiffany Stephenson
Arms, Legs, Wheels, Tracks and What Really Drives Them: Effectors and Actuators By: J. Islam & Tiffany Stephenson Components That Enable A Robots Actions Effector: Device that makes impact/influence on
More informationHighly Automated Driving: Fiction or Future?
The future of driving. Final Event Highly Automated Driving: Fiction or Future? Prof. Dr. Jürgen Leohold Volkswagen Group Research Motivation The driver as the unpredictable factor: Human error is the
More informationFuture mechatronical platform for easy application of assistant systems - EU-project
Future mechatronical platform for easy application of assistant systems - EU-project PEIT PEIT - Powertrain Equipped with Intelligent Technology Feierlich wissenschaftliche Tagung der Ungarischen Akademie
More informationLectures on Mechanics. Lesson#1
Lectures on Mechanics Lesson#1 Francesco.becchi@telerobot.it LESSONS TIME TABLE (pls. take note) 28/11 h9/12- mech components 1 (3h) 4/12 h9/12 mech components 2 (3h) 11/12 h9/12 mech technologies (3h)
More informationPL112 PL140 PICMA Bender Actuators
Piezotechnology PL112 PL140 PICMA Bender Actuators Multilayer Piezo Bender Actuators with High Travel and Low Operating Voltage Physik Instrumente (PI) GmbH & Co. KG 2008. Subject to change without notice.
More information