Frequently Asked Questions

Size: px

Start display at page:

Download "Frequently Asked Questions"

Byron Townsend
5 years ago
Views:

1 Frequently Asked Questions Utility Products/Shock Protection Gloves & Sleeves Question: Does Salisbury electrically test their rubber gloves? Answer: Salisbury electrically tests each glove prior to shipment. Each batch of gloves is also subjected to many physical tests in accordance with ASTM D120 standard. Question: How do I clean my rubber gloves? Answer: Rubber gloves should be stored hanging in a glove bag with the fingers up, not laid flat. Leather protectors should be removed before storing. Store in a dry and cool location (95 degrees F maximum) away from direct sunlight or areas where ozone may be a threat.

2 Question: How should I store my rubber gloves? Answer: Rubber gloves should be stored hanging in a glove bag with the fingers up, not laid flat. Leather protectors should be removed before storing. Store in a dry and cool location (95 degrees F maximum) away from direct sunlight or areas where ozone may be a threat. Question: What type of marker should I use to mark my rubber gloves? Answer: A Sharpie or any other brand of marker that uses a mild solvent in their ink. A soft tip should be used to prevent damage to the gloves. The marking should be placed as near to the bead on the cuff as possible. Question: What is the difference between Type I and Type II gloves? Answer: Type I gloves are made of natural rubber and are not considered to be resistant to ozone. Type II gloves are made of a synthetic rubber (EPDM) and are ozone resistant. Question: Why are the labels on rubber gloves different colors? Answer: The color indicates the class of the glove. This makes it easier for the glove wearer to determine the class of glove that they have. (Refer to Salisbury's Rubber Glove & Sleeve Labeling Chart - available on our website or call Customer Service to place a no-charge order) Question: What can I use to remove the tackiness from my gloves? Answer: It is recommended that you use Salisbury's 10-4 glove dust. Just a dusting inside of the gloves just before usage will help. Question: Can I use my rubber insulating gloves to change the oil in my car? Answer: NO. Rubber insulating gloves can be damaged by petroleum based products and solvents. Rubber insulating gloves should be only used for electrical protection only. Question: How long can I keep rubber insulating linemen gloves on my shelf and when do I need to send out for re-test? Answer: Rubber insulating gloves, which have not been issued have a shelf life of one year. After that time, they will need to be sent to a

3 certified test lab for inspection and dielectric testing or they must be discarded. Question: I have linemen gloves that are soiled and still have a valid test date? Are the gloves still good? How can I clean them? Answer: Soiled or dirty gloves need to be cleaned properly and then inspected for chemical damage. Rubber insulating gloves can be cleaned by using warm water and a non detergent or non petroleum-based cleaner. Be sure this cleaner does not contain any abrasives. Salisbury recommends the use of Super Salco Cleaner to clean rubber goods. After the gloves are cleaned and dried, carefully inspect the gloves for any sign of chemical or petroleum damage. These will show as either a hard spot or loss of elasticity in most cases. GroundingEquipment Question: Are rescue sticks required to be periodically electrically tested? Answer: Yes, see OSHA (j) for more information. Question: How often do I need to test ground sets? Answer: Grounding sets and jumper sets issued for service should be tested in regularly scheduled time intervals to ensure that defective ground sets and jumper sets are detected and removed from service. See ASTM F2249, 4.4 for more information. Question: What is the optimum torque level for ground clamps? Answer: Torque application should not exceed 25 ft*lbs. 20 to 25 ft*lbs is suggested. Hot Sticks & Tools Question: Are rescue sticks required to be periodically electrically tested? Answer: Yes, see OSHA (j) for more information. Insulated Jumpers Question: How often do I need to test ground sets? Answer: Grounding sets and jumper sets issued for service should be tested in regularly scheduled time intervals to ensure that defective ground sets and jumper sets are detected and removed from service. See ASTM F2249, 4.4 for more information.

4 Insulating Blankets Question: I know the ASTM standard governs manufacturing, testing and retesting requirements for insulated rubber gloves, sleeves and blankets, but does the OSHA standard also apply? Answer: OSHA enforces ASTM requirements for manufacturing, testing and retesting of gloves in OSHA Question: How often do I need test rubber insulating blankets? Answer: Rubber insulating blankets issued for service should be tested once a year. See ASTM D for more information. Question: Is there a certain side of the blanket a lineman should place on the conductor or energized equipment to insulate it? Answer: There are no requirements in ASTM F479 or OSHA regarding the in-service care of insulating blankets regarding the proper side of the blanket to use. Insulators Question: Does Salisbury offer any dead-end insulators? Answer: Yes. Salisbury offers a 15kV, 25kV, and a 35kV version. These insulators are RUS accepted. Line Hose & Covers Question: How often do I need to test line hose? Answer: Line hose issued for service should be electrically tested if a visual inspection indicates the electrical integrity may be compromised. See ASTM F478, 7.1 for more information. Question: What is SALCOR? Answer: Salisbury's SALCOR rubber formula is made of Type II rubber and was designed for increased versatility and flexibility in special coverup situations. All conventional style and straight style line hose are made with SALCOR. Outage Protection Question: What do Stinger Covers protect from? Answer: Salisbury stinger covers protect against phase to phase and

5 phase to ground wildlife contacts. These covers are RUS approved. Question: How can I install Bushing Covers? Answer: Salisbury's bushing covers can be installed without disconnecting equipment using rubber insulating gloves. Some bushing covers will require disconnecting the power for installation. Please contact your local Salisbury Representative if needed for clarity on which bushing cover you possess. Plastic Guards & Covers Question: Is there any advantage to the conductor cover \"connector stop?\" Answer: The unique connector stop is molded into one end of the conductor cover. This prevents covers from overlapping during installation which eliminates wasted time when trucks have to be moved to reconnect sections that did not couple (connect) correctly. These connector stops are only available on the 35kV version. Question: What if I have a need for a special cover not offered in the Salisbury catalog? Answer: Please contact your local Regional Sales Manager. In some cases, Salisbury may be able to assist with special requests. Protective Footwear Question: What is the difference between the yellow/black Salisbury overshoes and the red/black overshoes? Answer: The yellow/black Salisbury dielectric boots are manufactured and tested in accordance with ASTM F2412 & F2413 and these standards require an electrical dry sample test of the sole. Salisbury's red/black dielectric boots are manufactured to meet the new ASTM F1117 standard and are 100% tested in accordance with the electrical hazard requirements of ASTM F1116. Question: Do I need dielectric rubber boots for arc flash protection? Answer: The NFPA 70E standard discusses eliminating step potential. This can be accomplished though the use of rubber matting or dielectric boots. However, this is only for shock protection. For arc flash protection, NFPA 70E 130.7(C)(d) states, \"Heavy duty leather work shoes provide some arc flash protection to the feet and shall be used in all tasks in HRC 2 and higher and in all exposures greater than 4 cal/cm(2).\"

6 Voltage Detectors Question: When using the Salisbury voltage detector, how will I know when voltage is present? Answer: Salisbury's voltage detector is unique in that it indicates the presence of voltage with a LED light and a distinctive audible signal. Question: Does the Salisbury Audio/Visual Voltage Detector require any periodic calibration to ensure that the device is accurate and safe? Answer: Six standard detectors are available. Product\r\nnumber 4244, 4344 and 4444 are our\r\nstandard models. Numbers 4544, 4644 and\r\n4744 feature a self test function. \r\n\r\nself test models have a continuous flashing light and\r\nbeep to indicate that the batteries are charged\r\nand the unit is functioning properly including\r\nthe detection circuit and the light and\r\nbuzzer.\r\n\r\nit is good practice to test the detector prior each use in order to make sure that the unit is working properly.\r\n\r\nyou can purchase our Voltage Detector Tester part #4445 for the testing of the standard models. Question: Can voltage detectors pick up DC voltage? Answer: No

Honeywell Salisbury Outage Protection. Bushing Covers, Conductor Covers, Instant Insulation

Honeywell Salisbury Outage Protection Bushing Covers, Conductor Covers, Instant Insulation Why You Should Use Outage Protection The cost of animal caused outages to the utilities is preventable. Animals