Vibrating Level Switch TF 511, TF 611, TF 633
|
|
|
- Antony Bridges
- 5 years ago
- Views:
Transcription
1 evel measurement Vibrating evel Switch TF 511, TF 611, TF 633 Applications Chemical industry, petrochemical, offshore, Ship building Manufacturing, Power plants Pharmaceutical, food and beverages, water purification, environmental industry Special features Setup without adjustment Product-independent switching point Very high reproducibility Wear and maintenance free Smallest mounting dimensions Function KSR-TF is used as a universal level switch in liquids. It detects reliably with millimetre accuracy when a certain level is reached. It can be used in vessels and pipelines in any installation position. The instrument can be used as empty or full detector, as approved overfill protection, dry run protection or pump protection. Via the piezo drive, the tuning fork is energized to vibrate at its resonance frequency. When covered with medium, the frequency of the fork decreases. This frequency change is processed by the integrated electronics and converted into a switching command. KSR KUEBER AG Data sheet Vibrating evel Switch 10/ von 5 A division of the WIKA Group
2 Technical data: KSR TF 511 Example: TF Transistor Standard version mm 36mm (1 21/32") (1 27/64") 28mm 27mm (1 7/64") (1 1/16") 1 M12x1 35mm (1 3/8") 42mm (1 21/32") 10mm (25/64") Valve plug - Contactless electronic switch 132,5mm (5 7/32") ø31,7mm (1 1/4") 32 G3/4A, 3/4"NPT 158mm (6 7/32") 165mm (6 1/2") Valve plug - Transistor Max. Min. 40mm (1 37/64") ø21,3mm (27/32") 13mm (33/64") 1 Thread G¾ A, G1 A (DIN ISO 228/1), ¾ NPT or 1 NPT with plug M12 x 1* 2 Thread G¾ A, G1 A (DIN ISO 228/1), ¾ NPT or 1 NPT (valve plug ISO 4400) 3 Thread G¾ A, G1 A (DIN ISO 228/1), ¾ NPT or 1 NPT (valve plug ISO 4400 with IDC method of termination) R R * Keep in mind that the total length is extended by the plug connection. - + PA - + PA KSR TF 511 Contactless electronic switch Transistor (PNP) - wetted parts (process fittings and tuning fork) Process temperature - Standard - high temperature version Stainless steel 316 (equivalent oder ) 316 and plastic PE C C 0,7... 2,5 g/cm³ Ambient temperature on the housing C approx.. 2mm with vertical installation Process fitting Thread from G¾ A, Tri-Clamp from 1", bolting from DN 25 Operation voltage V AC, 50/60 Hz, V DC V DC Powwer consumption max. 0,5 W Domestic current requirement ca. 3mA (via load circuit) oad current min. 10 ma/max. 250 ma < 250 ma Turn on voltage < 55 V DC Protection rating IP 65 (Valve plug ISO 4400), IP 67 (Valve plug ISO 4400 with IDC method of termination) IP 65 (Valve plug ISO 4400), IP 67 (Valve plug ISO 4400 with IDC method of termination) IP 67 (M12 x 1 plug connection) Page 2 von 5 KSR KUEBER AG Data sheet Vibrating evel Switch 10/2012
3 Technical data: KSR TF Thread 2 Tri-Clamp 3 Cone DN 25 4 Bolting DN 40 5 Flange 6 Tuchenhagen Varivent G¾=66 mm (2.6") G1=69 mm (2.72") 18,5 mm (0.73") 32 (G¾A, ¾"NPT) 41 () G¾A, ¾"NPT 36 mm (1.42") 57 mm (2.24") 55 mm (2.17") mm (0.75") ø 33,7 mm (1.33") mm (1.93") 6 KSR TF wetted parts (process fittings and tuning fork) Contactless electronic switch Stainless steel 316 (equivalent oder ) Hasteloy Stainless steel, plastic, Aluminium Transistor (PNP) Relay Namur Two-wire Process temperature C 0,5... 2,5 g/cm³ Ambient temp. on the housing C approximately 2 mm with vertical installation Process fitting Thread from G¾ A, flanges from DN 25, Tri-Clamp from 1", cone from DN 25, bolting from DN 25, hygienic fittings Operating voltage V AC, 50/60 Hz, V DC V DC V AC, 50/60 Hz, V DC for connection to an amplifier according NAMUR IEC , ca. 8,2 V Power consumption max. 0,5 W VA (AC), 1,5 W DC oad current min. 10 ma/max. 400 ma < 400 ma Turn on voltage < 55 V DC min. 10 mv, max. 253 V AC, 253 V DC Switching current min. 10 μa/max. 3 A AC, 1 A DC Breaking capacity min. 50 mw, max. 750 VA AC, 54 W DC Current consumption: - Falling characteristics - rising characteristics Off-load voltage Shortcircuit current Output signal: - empty (uncovered) - full (covered) Protection rating IP 66/IP67-2,2 ma uncovered/ 1 ma covered - 1 ma uncovered/ 2,2 ma covered - 1 ma U o ca. 8,2 V I u ca. 8,2 ma V DC (via the signal conditioning instrument) 8 ma 16 ma < 2 ma KSR KUEBER AG Data sheet Vibrating evel Switch 10/2012 Page 3 von 5
4 G3/4A, 3/4"NPT Technical data: KSR TF Thread 2 Tri-Clamp 3 Cone DN 25 4 Bolting DN 40 5 Flange 6 Gas-tight leadthrough 18,5 mm (0.73") 32 (G3/4A, 3/4"NPT) 41 () 36 mm (1.42") 57 mm (2.24") ø 21,3 mm (0.33") mm (0.75") 7 Sensor length (enght is to specify with order) ø 33,7 mm (1.33") KSR TF wetted parts (process fittings and tuning fork) Contactless electronic switch Stainless steel 316 (equivalent oder ) Hasteloy Stainless steel, plastic, Aluminium Transistor (PNP) Relay Namur Two-wire Process temperature C 0,5... 2,5 g/cm³ Ambient temp. on the housing C approximately 2 mm with vertical installation Process fitting Thread from G¾ A, flanges from DN 25, Tri-Clamp from 1", cone from DN 25, bolting from DN 25, hygienic fittings Operating voltage V AC, 50/60 Hz, V DC V DC V AC, 50/60 Hz, V DC for connection to an amplifier according NAMUR IEC , ca. 8,2 V Power consumption max. 0,5 W VA (AC), 1,5 W DC oad current min. 10 ma/max. 400 ma < 400 ma Turn on voltage < 55 V DC min. 10 mv, max. 253 V AC, 253 V DC Switching current min. 10 μa/max. 3 A AC, 1 A DC Breaking capacity min. 50 mw, max. 750 VA AC, 54 W DC Current consumption: - Falling characteristics - rising characteristics Off-load voltage Shortcircuit current Output signal: - empty (uncovered) - full (covered) Protection rating IP 66/IP67-2,2 ma uncovered/ 1 ma covered - 1 ma uncovered/ 2,2 ma covered - 1 ma U o ca. 8,2 V I u ca. 8,2 ma V DC (via the signal conditioning instrument) 8 ma 16 ma < 2 ma Subject to change without notice Page 4 von 5 KSR KUEBER AG Data sheet Vibrating evel Switch 10/2012
5 Subject to change without prior notice Page 5 von 5 KSR KUEBER AG Data sheet Vibrating evel Switch 10/2012 A division of the WIKA Group KSR KUEBER Nieveau-Messtechnik Heinrich-Kuebler-Platz Zwingenberg Telefon (+49) Fax (+49) info@ksr-kuebler.com Articelnumber
OPTISWITCH 4000/5000. Vibration level switches for liquids
OPTISWITCH 4000/5000 Technical Datasheet Vibration level switches for liquids Operates up to 250 C / 480 F and 64 bar / 925 psi Pump dry-run detection High reliability due to permanent fault monitoring
SITRANS L Level instruments
Overview Configuration is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand applications, as well as pump protection. It is ideal for use in confined
Level instruments. Point level measurement - Vibrating switches SITRANS LVL100. 5/78 Siemens FI Horizontal mounting.
evel instruments Siemens AG 2009 Overview Configuration Horizontal mounting (recommended mounting position, particularly for adhesive applications) Vertical mounting with lower density is a compact vibrating
Operating Instructions OPTISWITCH 5100 C, 5150 C with contactless electronic switch
Operating Instructions OPTISWITCH 5100 C, 5150 C with contactless electronic switch Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symbolism used... 4 2 For your safety
Operating Instructions OPTISWITCH 5100 C, 5150 C with transistor output
Operating Instructions OPTISWITCH 5100 C, 5150 C with transistor output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symbolism used... 4 2 For your safety 2.1 Authorised
Operating Instructions. VEGASWING 61, 63 with oscillator SW E60N (EX)
Operating Instructions VEGASWING 61, 63 with oscillator SW E60N (EX) Contents Contents Safety information... 2 Note Ex area... 2 1 Product description... 3 2 Function and application... 4 2.1 Principle
Operating Instructions OPTISWITCH 5200 C, 5250 C with contactless electronic switch
Operating Instructions OPTISWITCH 5200 C, 5250 C with contactless electronic switch Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symbolism used... 4 2 For your safety
Magnetic switch For bypass level indicators Model BGU
Level measurement Magnetic switch For bypass level indicators BGU KSR data sheet BGU Applications Magnetic switches for detecting the limits of filling levels in bypass level indicators Chemical and petrochemical
Operating Instructions OPTISWITCH 4000 C with transistor output
Operating Instructions OPTISWITCH 4000 C with transistor output Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3 Symbolism used... 3 2 For your safety 2.1 Authorised
Level Measurement Point level measurement - Vibrating switches
Overview Configuration Horizontal mounting (recommended mounting position, particularly for adhesive applications) Vertical mounting is a compact vibrating level switch for material detection in liquid
Operating Instructions OPTISWITCH 5200 C, 5250 C with transistor output
Operating Instructions OPTISWITCH 5200 C, 5250 C with transistor output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symbolism used... 4 2 For your safety 2.1 Authorised
Operating Instructions OPTISWITCH 5200 C, 5250 C with NAMUR output
Operating Instructions OPTISWITCH 5200 C, 5250 C with NAMUR output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symbolism used... 4 2 For your safety 2.1 Authorised
Magnetic switch For bypass level indicators Model BGU for nuclear power plants
Level measurement Magnetic switch For bypass level indicators BGU for nuclear power plants KSR data sheet BGU for NPP Applications Magnetic switches for detecting the limits of filling levels in bypass
Level detection in liquids. Vibration VEGASWING 51 VEGASWING 61 VEGASWING 63. Product Information
Level detection in liquids Vibration VEGASWING 5 VEGASWING 6 VEGASWING 6 Product Information Contents Contents Description of the measuring principle...........................................................
Level Limit Switch liquiphant FTL 360 / FTL 361
Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact
Instruction Manual September 2010 SITRANS LVL200S
Instruction Manual September 200 SITRANS LVL200S Contents Contents About this document. Function.................................. 4.2 Target group.............................. 4.3 Symbolism used............................
Magnetic float switch For vertical installation Model FLS
Level measurement Magnetic float switch For vertical installation Model FLS KSR data sheet FLS for further approvals see page 3 Applications Level measurement for almost all liquid media Pump and level
Electromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids Flow rate measurement is independent of density, temperature, viscosity and pressure Pulsed coil excitation to
Operating Instructions April 2008 SITRANS LVL100
Operating Instructions April 2008 SITRANS LVL100 Content Content 1 About this document 1.1 Function............................. 4 1.2 Target group.......................... 4 1.3 Symbolism used.......................
Level Limit Switch liquiphant FTL 365 / FTL 366
Technical Information TI 86F/00/en Level Limit Switch liquiphant FTL 65 / FTL 66 Level limit switch Liquiphant II with vibrating probe. For all types of liquid. With explosionproof housing for use in hazardous
Limit level measurement of bulk solids. Vibration VEGAVIB VEGAWAVE Product Information
Limit level measurement of bulk solids Vibration VEGAVIB 61-63 VEGAWAVE 61-63 Product Information Contents Contents 1 Description of the measuring principle.................................................
Assembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
Pressure Transmitters for Sanitary Applications Model SA-11
Electronic Pressure Measurement Pressure Transmitters for Sanitary Applications Model SA-11 WIKA Data Sheet PE 81.80 Applications Food and beverage industry Pharmaceutical industry Biotechnology industry
Operating Instructions 11/2015
Vibrating Switches SITRANS LVL200E NAMUR Operating Instructions 11/2015 2 SITRANS LVL200E - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symbols used...
Operating Instructions April 2008 SITRANS LVL200E
Operating Instructions April 2008 SITRANS LVL200E Content Content About this document. Function............................. 4.2 Target group.......................... 4.3 Symbolism used.......................
Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF)
Level measurement Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF) TC Fluid Control WIKA data sheet LM LM 3001 30.01 for further approvals see page 3 Applications
Operating Instructions OPTISWITCH 5200 C, 5250 C
Operating Instructions OPTISWITCH 5200 C, 5250 C Transistor (NPN/PNP) Document ID: 30432 2 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3 Symbols used... 3 2 For your
Operating Instructions 07/2013
Vibrating Switches SITRANS LVL100 - transistor (PNP) Operating Instructions 07/2013 2 SITRANS LVL100 - Operating Instructions Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3
Pressure transmitter COMPACT ECOnomic
Pressure transmitter COMPACT ECOnomic for food/pharmaceutical/biotechnology, Type series CA1110 Features Digitale pressure transmitter Hygienic design according to EHEDG Case and wetted parts of stainless
Bypass level indicator With magnetic display Model BNA for nuclear power plants
Level measurement Bypass level indicator With magnetic display Model BNA for nuclear power plants KSR data sheet BNA for NPP Applications Continuous level indication without power supply Indication of
Pipe surface resistance thermometer, for clamping Model TR57-M, miniature design
Electrical temperature measurement Pipe surface resistance thermometer, for clamping Model TR57-M, miniature design WIKA data sheet TE 60.57 Applications Sanitary applications Food and beverage industry
Metal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam
Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,
Resistance thermometer Model TR10-E, for additional thermowell
Electrical temperature measurement Resistance thermometer Model TR10-E, for additional thermowell WIKA data sheet TE 60.05 further approvals see page 6 Applications Chemical industry Petrochemical industry
Metal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
Miniature resistance thermometer For sanitary applications Model TR21-A, with flange connection
Electrical temperature measurement Miniature resistance thermometer For sanitary applications Model TR21-A, with flange connection WIKA data sheet TE 60.26 Applications Sanitary applications Food and beverage
Level Sensor with G1/2" Thread Hygienic
SENSORS FOR FOOD AND BIOPHARMA. Product Information NVS-141, -143, -146, -161, -163, -166, -181, -183, -186 FOOD Level Sensor with Thread Hygienic Application/intended use Limit detection of aqueous and
Level Sensor with M12 Thread Hygienic
SENSORS FOR FOOD AND BIOPHARMA. Product Information NVS-041, -043, -046, -061, -063, -066, -081, -083, -086 FOOD Level Sensor with M12 Thread Hygienic Application/intended use Limit detection of aqueous
GA 24 Heavy-duty variable area flowmeter
KROHNE 10/99 D 11 GA24 01 E GR Heavy-duty variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES
Technical Information TI 240F/00/en Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES Compact capacitive level probes (with European certificates). Fully and partially insulated rod and
INSTRUCTION MANUAL. Read before installing the recommendations and warnings on the last page of this manual. Vibra Switch S LEVEL SWITCH
INSTRUCTION MANUAL Read before installing the recommendations and warnings on the last page of this manual. Vibra Switch S LEVEL SWITCH Manufactured by: www.klay-instruments.com Nijverheidsweg 5 P.O. Box
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam Metallic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in
Pressure transmitter for general applications Model S-10, standard version Model S-11, flush diaphragm
Electronic Pressure Measurement Pressure transmitter for general applications Model, standard version Model S-11, flush diaphragm WIKA Data Sheet PE 81.01 Applications n Mechanical engineering n Hydraulics
Flow switches Series AD/VH
Flow switches Series AD/VH Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling,
Level sensor Magnetostrictive, high-resolution measurement principle Model FLM-H, for sanitary applications
Level Level sensor Magnetostrictive, high-resolution measurement principle Model FLM-H, for sanitary applications WIKA data sheet LM 20.03 Applications Food and beverage industry Pharmaceutical industry
Level Probes multicap T DC 12 TA multicap T DC 11/16/21/26 TAN/TAS
Technical Information TI 239F/00/en Level Probes multicap T DC 12 TA multicap T DC 11/16/21/26 TAN/TAS Compact capacitive level probes (with North American certificates). Fully and partially insulated
Level limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
CombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel ome hygienic connections conform to -A standards, FDA demands and EHEDG guidelines
Gas-actuated thermometer with switch contacts For sanitary applications, stainless steel version Model 74
Temperature Gas-actuated thermometer with switch contacts For sanitary applications, stainless steel version Model 74 WIKA data sheet TV 27.02 Applications Food industry Sanitary applications Bio and pharmaceutical
Installation and Operating Instructions
Installation and Operating Instructions Please retain for future usage Level Transmitters for Magnetic Level Gauges BT / BTX / BTXI 120872 / Rev. 02-26.02.2016 INTRODUCTION KSR Kuebler level transmitters
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up
OPTISWITCH 6500 C Technical Datasheet
OPTISWITCH 6500 C Technical Datasheet Switch for level detection and dry-run protection Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Maintenance-free KROHNE
SITRANS T measuring instruments for temperature
for installation in pipelines and tanks Overview The resistance thermometer is designed for installation in tanks and pipelines as well as for the measurement of temperature with hygiene requirements.
Capacitive Sensors. Series 80 - PNP
Ø50 Ø30 Ø43,5 M12x1 Capacitive Sensors Series 80 - PNP Housing: Tri-Clamp Housing material: Stainless steel VA Also suitable for food applications Sensing distance 1...40 mm adjustable With flange connector
Soliphant T FTM260. Technical Information. Level limit switch Cost-effective vibration limit switch for fine-grained solids
Technical Information Soliphant T FTM260 Level limit switch Cost-effective vibration limit switch for fine-grained solids Application Soliphant is a rugged level limit switch for use in silos containing
Sensor boxes SRBE Key features and product range overview
Sensor boxes SRBE Sensor boxes SRBE Key features and product range overview Function Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic
Proximity switches and switch brackets
Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch
Level measurement Guided microwave Product Information VEGAFLEX ma/hart. Level Switching Pressure
Level measurement Guided microwave Product Information VEGAFLEX 62 4 20 ma/hart Level Switching Pressure 2 VEGAFLEX 62 4 20 ma/hart Contents Contents 1 Product description...4 1.1 Configuration... 4 1.2
Translation FEDERAL AGENCY OF TECHNICAL REGULATION AND METROLOGY CERTIFICATE of Pattern Approval of Measuring Devices DE.C.29.004.A No. 19358 Period of Validity: until the 11 th of March, 2020 PATTERN
Design and application
Design and application The function of the SGM is based on the variable area float principle. In all cases where a dependable device is required for indicating instantaneous values and monitoring the flow
Guth modulating valves. The sophisticated solution
Guth modulating valves The sophisticated solution VSR-modulating valves with diaphragm actuator Modulating valves are used in process technology to control process parameters such as temperature, pressure
Diaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100
Pressure Diaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100 WIKA data sheet PM 04.16 Applications for further approvals see page 10 Hygienic pressure measurement in sanitary
OPTISWITCH 6500 C Technical Datasheet
OPTISWITCH 6500 C Technical Datasheet Microwave Level Switch for advanced hygienic applications Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Maintenance-free
DIAMOND POINT VIBRATING PROBES
DIAMOND POINT VIBRATING PROBES DP130 DP120 DP140 DP150 Instruction Manual Third revision, April 2016 Hycontrol Ltd., Larchwood House, Orchard Street, Redditch, Worcestershire, B98 7DP, U.K. Tel: + 44 (0)1527
Pressure transmitter UNIVERSAL CA
Pressure transmitter UNIVERSAL CA for food/pharmaceutical/biotechnology,type series CA2110 Features Universal pressure transmitter, hygienic design per EHEDG, FDA and GMP Stainless steel case, degree of
Level switches Series LC40 Float level switch for liquids
Level switches Series LC40 Float level switch for liquids Simple and robust construction Versatile and easily adaptable to the different control positions of the industrial processes Side or top of the
METAL DETECTOR AND REJECTION SYSTEM FOR PIPELINE APPLICATIONS
DEVICE DESCRIPTION This metal detector and rejection system was specially developed to meet high detection and hygiene requirements in the analysis of liquid and viscous products (sauces, jams, marmalades,
BFS-10-O G1/4: BFS-10-O G1/2: BFS-10-O G1: Contact rating: BFS-10-O G1/4
Flow Switches Index: B / 923-1838 BFS-10-N / BFS-10-O for monitoring liquids, with or without optical display Features set point continuously adjustable rugged, low hysteresis, any mounting position, high
ABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet
Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive
Level Sensors / Transmitters to measure of liquids media
measurement Sensors / Transmitters to measure of liquids media Applications Chemical, petrochemical, liquid natural gas, off-shore ship-building, machine-building industry manufacturing industry, power
OPTISWITCH 5300 C. Handbook. Vibrating Level Switch. - transistor (NPN/PNP)
OPTISWITCH 5300 C Handbook Vibrating Level Switch - transistor (NPN/PNP) 2 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3 Symbols used... 3 2 For your safety 2.1 Authorised
Magnetic-inductive flow meter EPS / UMF2. Technical data sheet
Magnetic-inductive flow meter EPS / UMF2 Technical data sheet high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials low-cost grounding
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
OPTISWITCH 5300 C. Handbook. Vibrating Level Switch. - transistor (NPN/PNP) With SIL qualification
OPTISWITCH 5300 C Handbook Vibrating Level Switch - transistor (NPN/PNP) With SIL qualification 2 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3 Symbols used... 3 2
k Applications Bourdon tube pressure gauge with switch contacts For the process industry, NS 100 and 160 Models PGS and PGS23.
Pressure Bourdon tube pressure gauge with switch contacts For the process industry, NS 100 and 160 Models PGS23.100 and PGS23.160 k Applications for further approvals see page 7 WIKA data sheet PV 22.02
Differential pressure gauge with diaphragm
Differential pressure gauge with diaphragm and switch function,type series BG2 Features Differential pressure gauge with diaphragm and switch function Nominal range -40...0 mbar to -1...24 bar, 0 40 mbar
Resistance thermometer For sanitary applications Model TR22-A, exchangeable sensor
Electrical temperature measurement Resistance thermometer For sanitary applications Model TR22-A, exchangeable sensor WIKA data sheet TE 60.22 for further approvals see page 14 Applications Sanitary applications
Thermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications Sanitary applications Food industry Beverage industry Bio and pharmaceutical industry,
Absolute pressure gauge with diaphragm
Absolute pressure gauge with diaphragm and switch function,type series BF2 Features Absolute pressure gauge with diaphragm and switch function Nominal ranges 0 60 mbar abs to 0 2500 mbar abs With integrated
Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection
MWD. Industrial Temperature Assemblies RTD. Meassuring range ºC. Pt100 sensor class A, class B, class 1/3, class 1/10, or Cryogenic.
Industrial Temperature Assemblies measuring monitoring analysing MWD OO Meassuring range -200...+600ºC. OO Pt100 sensor class A, class B, class 1/3, class 1/10, or Cryogenic. OO Output: Resistance or analogue
Modular resistance thermometer - Quicktemp TP60/TW39...T500 -
Das modulare MODULAR von Hengesbach QUICK-CALIBRATE INSIDE FEATURES 1 BASIC DEVICE - PROCESS ADAPTATION USING PROTECTIVE SLEEVE DESIGNS QUICKTEMP MODULAR PROCESS CONNECTION SYSTEM FOR DEVICE REPLACEMENT
Level limit switch Series CN 4000 Selection list. Specifications 2. Applications 4
Table of contents Page Specifications 2 Applications 4 ------------------------------------------------------------------------------------------------------------ CN 4020 5 Short extension length ------------------------------------------------------------------------------------------------------------
Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35
Electrical temperature measurement Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35 WIKA data sheet TE 60.03 for further approvals see page 7 Applications Machinery,
TUNING FORK LEVEL WORKING PRINCIPLE APPLICATION. Solid Level Detection FEATURE. For Liquid: * Water & Solutions * General Purpose Solvent * Petroleum
TUNING FORK LEVEL WORKING PRINCIPLE The tuning fork of level switch operated by using two piezoelectric elements built-in on vibration tube. The first piezoelectric element triggered by pulse signal that
Pressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
Operating Instructions VEGASWING 66. Vibrating level switch for liquids under extreme process temperatures and pressures
Operating Instructions Vibrating level switch for liquids under extreme process temperatures and pressures VEGASWING 66 Transistor (NPN/PNP) With SIL qualification Document ID: 44951 2 Contents Contents
Continuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
Bimetal thermometer with Pt100 electrical output signal Model 54, stainless steel version
Mechatronic temperature measurement Bimetal thermometer with Pt100 electrical output signal Model 54, stainless steel version WIKA data sheet TV 15.01 Applications Twin-Temp Machine building, plant and
Operating Instructions 07/2017
Vibrating Switches SITRANS LVL200H Transistor (NPN/PNP) Operating Instructions 07/2017 2 SITRANS LVL200H - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5
TORRIX Magnetostrictive level sensor
TORRIX Magnetostrictive level sensor Precision Versatility Security Sensors & Systems Worldwide: www.fafnir.com FAFNIR Quality and Satisfaction Company: Based in Hamburg, Germany, FAFNIR GmbH has over
Vibrating Level Switches for Liquids & Solids HYC-VLS02 Elect. Iss. 02 SIL 2 APPROVED VIBRATING LEVEL SWITCHES FOR LIQUIDS AND SOLIDS
Vibrating Level Switches for Liquids & Solids HYC-VLS02 Elect. Iss. 02 SIL 2 APPROVED VIBRATING LEVEL SWITCHES FOR LIQUIDS AND SOLIDS VIBRATING PROBE LEVEL SWITCHES FOR LIQUIDS AND SOLIDS PRINCIPLE OF
Operating Instructions VEGASWING 51. Vibrating level switch for liquids. - contactless electronic switch. Document ID: 41045
Operating Instructions Vibrating level switch for liquids VEGASWING 51 - contactless electronic switch Document ID: 41045 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3
Bimetal Thermometers Model 54, Heavy Duty Series
Mechanical Temperature Measurement Bimetal Thermometers Model 54, Heavy Duty Series WIKA Data Sheet TM 54.01 Applications T Universally suitable for plant, machinery, tank and apparatus construction T
High-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T
JUNE 2018 Pressure High-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T WIKA data sheet DS 95.08 TYPE EL Applications Hygienic pressure measurement in sanitary applications
Shipbuilding solutions
Shipbuilding solutions Level Flow Pressure Worldwide solutions Hundreds of thousands of Trimod Besta level switches ensure the safe voyage of vessels on our oceans Since 1967 the Shipbuilding industry
NIVOMAG O UR P ROFESSION IS Y OUR L EVEL
NIVOMAG M A G N E T I C L E V E L S W I T C H E S O UR P ROFESSION IS Y OUR L EVEL N I V O M A G GENERAL NIVOMAG MK-00 series magnetic float level switches are used for point level detection of liquids
3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and
Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications