SECURITY LOCKS WITH ELECTRONIC LOCK MECHANISM

Transcription

1 SAFEGUARDING YOUR SECURITY SECURITY LOCKS WITH ELECTRONIC LOCK MECHANISM

2 Security lock with electronic key Transforms a normal lock into a security lock with a coded electronic key. Security system applicable to armoured doors with double-bitted or Euro cylinder locks, with a bar travel between 17 and 20 mm. May be installed above or below existing lock and connected with bar supplied (see installation layout in following pages). Works in conjunction with the lock, locking/releasing the bar ONLY when the lock is closed. Includes internal knob for manual unlocking, for emergency use ONLY.

3 Locks with security locking mechanism Integrated locks with copy-protected MMCODE electronic keys. These locks have both a mechanical and an electronic locking mechanism. A lower double-bitted or Euro-cylinder type lock. An upper locking mechanism with electronic transponder key (MMCODE ) that works ONLY when the lower lock is closed, blocking the movement of the bars and locking the door. In emergencies ONLY, the upper locking mechanism may be opened manually from the internal side of the door with the knob supplied.

4 Patented by MOTTURA SERRATURE DI SICUREZZA S.p.A. Power supply The power supply for all the locking and unlocking functions of the electronic locking mechanism is provided by a battery pack containing two 9 Volt alkaline BATTERIES installed on the door itself or, if preferred, MAINS POWERED. Internal Escutcheon External Escutcheon

5 The transponder reader escutcheon CHROME supplied together with the lock acts as the interface on the door. This interface receives signals from the transponder when the card or key are simply pressed gently against the button at the centre of the escutcheon itself. Authentication is extremely secure and is based on the exchange of encrypted codes. The escutcheon is available in a choice of following finishes. BRONZE PVD GOLD BRASS ANODIZED SILVER SATIN CHROME

6 Emergency power 9V If the batteries do not have enough charge, the system may be powered by placing a standard 9V alkaline battery directly against the contacts on the escutcheon, behind the flap with the Mottura logo. Copy-protected keys Each lock comes complete with a sealed set containing 3 red TRANSPONDER CARDS, each of which coded differently (001, 002, 003) and a blue OWNER'S CARD for programming, changing codes and requesting duplicate transponder cards. An optional TRANSPONDER KEY is also available, with the transponder housed in an ergonomic casing. The system can memorise up to 255 individually coded (001, 002, 003 etc.) TRANSPONDER CARDS/KEYS.

7 Replacing copy-protected Keys The system is supplied as standard with 3 differently coded (...001,...002,...003) transponder cards/keys. In the event of loss or theft of a key, all the keys in the set may be cancelled and the remaining keys then memorised again to prevent access with the lost or stolen key. If the system is supplied (on request only) with identically coded transponder cards/keys (...001,...001,...001), in the event of loss or theft of a key, a new set of transponder cards/keys, inclusive of a new blue owner's/programming card may be ordered, and the code of the MMCODE system changed. Changing the code does not require specialized personnel, and consists of a simple procedure carried out on the internal side of the door. This procedure definitively cancels the previous transponder cards/keys memorized.

8 N Variation in bolt centre distance Lock with copy-protected MMCODE electronic key and provision for security cylinder. Bolt centre distances: 28/37 mm - Three-point with latchbolt Ø20 mm operated by cylinder and handle */ 8 Cylinder and handle backset 63 mm Round bolts Ø18 mm with 29 mm travel - Bar travel 20 mm The lock is supplied complete with: Wiring with connectors for connection Internal and external escutcheons for MMCODE in brass finish Battery case for mounting on door complete with 9V alkaline batteries (PP3 type) Knob for manually unlocking from internal side in brass finish Sealed envelope containing 3 red TRANSPONDER CARDS and 1 blue OWNER'S CARD for requesting duplicates and programming. N.B. Cylinder not included. Available as either right or left handed versions (please specify). Fixing cylinder screw Cylinder reinforcement fastener Type A, 6.1 diam. hole Type B, 5.1 diam. hole N 2 x 9V Variation in bolt centre distance Mortise lock with copy-protected MMCODE electronic key and provision for security cylinder. Bolt centre distances: 28/37 mm - Three-point with latchbolt Ø20 mm operated by cylinder and handle */ 8 Cylinder and handle backset 63 mm Round bolts Ø18 mm with 29 mm travel - Bar travel 20 mm The lock is supplied complete with: Wiring with connectors for connection Internal and external escutcheons for MMCODE in brass finish Battery case for mounting on door complete with 9V alkaline batteries (PP3 type) Knob for manually unlocking from internal side in brass finish Sealed envelope containing 3 red TRANSPONDER CARDS and 1 blue OWNER S CARD for requesting duplicates and programming. N.B. Cylinder not included. Available as either right or left handed versions (please specify). Fixing cylinder screw Cylinder reinforcement fastener Type A, 6.1 diam. hole Type B, 5.1 diam. hole 2 x 9V

9 49.571N 49 Variation in bolt centre distance Lock with double-bitted key + MMCODE electronic locking mechanism, with copy-protected keys Bolt centre distances: 28/37 mm - Three-point with latchbolt Ø20 mm operated by key and handle */ 8 - Key and handle backset 63 mm Round bolts Ø18 mm with 40 mm travel - Bar travel 20 mm The lock is supplied complete with: Wiring with connectors for connection Internal and external escutcheons for MMCODE in brass finish Internal and external escutcheons with plastic mount for double-bitted key entry with brass finish Battery case for mounting on door complete with 9V alkaline batteries (PP3) Knob for manually unlocking from internal side in brass finish Sealed envelope containing 3 red TRANSPONDER CARDS 1 and 1 blue OWNER'S CARD for requesting duplicates and programming. Available as either right or left handed versions (please specify) N 2 x 9V Mortise lock with double-bitted key + MMCODE electronic locking mechanism, with copy-protected keys Bolt centre distances: 28/37 mm - Three-point with latchbolt Ø20 mm operated by key and handle */ 8 - Key and handle backset 63 mm Round bolts Ø18 mm with 40 mm travel - Bar travel 20 mm The lock is supplied complete with: Wiring with connectors for connection Internal and external escutcheons for MMCODE in brass finish Internal and external escutcheons with plastic mount for double-bitted key entry with brass finish Battery case for mounting on door complete with 9V alkaline batteries (PP3) Knob for manually unlocking from internal side in brass finish Sealed envelope containing 3 red TRANSPONDER CARDS and 1 blue OWNER'S CARD for requesting duplicates and programming. Available as either right or left handed versions (please specify). Variation in bolt centre distance 2 x 9V

10 N Security locking mechanism with MMCODE electronic protected key Supplied as standard with: Connection rod with adjustable length from 190 to 280 mm 2 cables complete with connectors for connection Internal and external escutcheons in brass finish Battery case for mounting on door complete with 9V alkaline batteries (PP3 type) Knob for manually unlocking from internal side in brass finish Sealed envelope containing 3 red TRANSPONDER CARDS and 1 blue OWNER'S CARD for requesting duplicates and programming. Stud for fastening bar + relative fastener screws and nuts. Available as right or left handed versions and high or low versions (please specify) 2 x M4 holes 2 x 9V REPLACEMENT KEY SET A B 3 red MMCODE transponder cards + 1 blue owner's/programming card in sealed envelope. 3 MMCODE transponder keys + 1 blue owner's/programming card in sealed envelope.

11 49 ACCESSORIES A b TRANSPONDER CARD additional TRANSPONDER KEY additional A Reserved to MOTTURA Club b Reserved to MOTTURA Club Duplicate TRANSPONDER CARD Duplicate TRANSPONDER KEY Finish Bronze Toroidal 230/9V 30 VA transformer Brass Polished Chrome Brass knob with spring return */ 8 for items /256/265/266 and 45, 49 and 62 series Pack of Connector cable MMCODE - escutcheons Cable length approx. 450 mm Ready-wired battery case (BLACK cable) for MMCODE N N/991N. Batteries NOT included Cable length approx mm Codice Finish 99678BR Bronze 99678CR Chrome 99678OT Brass 99678PV PVD Gold 99678AA Anod. Silver 99678CS Satin chrome Internal/external transponder escutcheon for MMCODE. Centre body with black finish. The picture shows the POLISH CHROME finish Do not use the previous version battery casing (99604 with grey cable) as this may irreparably damage the MMCODE system Connector cable MMCODE -transformer Cable length approx mm

12 P190391GB - 06/11 - a_009527