VENCO - POTTERS WHEELS

Transcription

1 VENCO - S Including VENCO - COMPACT - SIT DOWN, CONE DRIVE VENCO No 6 Potters Wheel 280mm [11 ] Wheel For details see page 2 VENCO - STANDARD - SIT DOWN, CONE DRIVE VENCO No 3 Potters Wheel 330mm [13 ] Wheel VENCO No 5 Potters Wheel 330mm [13 ] Wheel For details see page 3 VENCO - ELECTRONIC - SIT DOWN, VENCO Direct Drive Potters Wheel 330mm [13 ] Wheel For details see page 4 VENCO No 7 High Tourque Potters Wheel 330mm [13 ] Wheel For details see page 5

2 VENCO - COMPACT - SIT DOWN, CONE DRIVE A VENCO Compact Cone Drive Wheel AVAILABLE MODELS: No kW (¼ HP) Motor, 280mm (11") WHEELHEAD. $ DESIGN: Size: 584mm x 482mm x 533mm high. Main bearings: Self lubricating bronze with double "O" ring seals. Weight: 25kg Freewheeling wheel. Light weight and compact. Corrosion resistant Aluminium tray and wheel. Steel frame/body zinc plated and powder coated for extreme corrosion resistance. Linkage bearings: Self lubricating polyurethane for vibration damping. Foot operated speed control. Speed range: RPM, infinitely variable dependant on foot pedal position. Shaft: 19mm ( ¾") diameter ground steel All internal components zinc plated. Resilient mounted motor for smooth quiet operation. Guaranteed for 12 months against defective parts or faulty workmanship. Low cost. Comfortable padded seat as standard. All control linkages mounted on vibration resistant, lubricated for life polyurethane bearings.

3 A VENCO No 3 Potters Wheel VENCO - STANDARD - SIT DOWN, CONE DRIVE Venco No. 3 Full size ergonomic Action pedal 1/2hp motor, 330mm (13 ) wheel Now with a 3 year warranty Venco No. 3 Stainless steel body option 1/2hp motor, 330mm (13 ) wheel AVAILABLE MODELS: No.3 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. $1, No.3 S/S 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. Stainless Steel $1, No.5 370W (1/2 HP) Motor, 330mm (13") W/H. ( No 5 ) - with speed lock $1, No.5 S/S 370W (1/2 HP) Motor, 330mm (13") W/H. ( No 5 ) - with speed lock, Stainless steel $1, DESIGN Shaft: 19mm (¾") diameter ground steel. Weight: 30kg. Size: 685mm x 508mm x 558mm high. Main bearings: Self lubricating bronze with double "O" ring seals. Linkage bearings: Self lubricating polyurethane for vibration damping. All internal components zinc plated. Resilient mounted motor for smooth quiet operation. All control linkages mounted on vibration resistant, lubricated for life polyurethane bearings. One of the hardest wearing wheels available used by many schools world wide. Low cost. Speed range: RPM, infinitely variable dependant on foot pedal position Freewheeling wheel Corrosion resistant Aluminium tray and wheel. Steel frame/body zinc plated and powder coated for extreme corrosion resistance Light weight and compact. Foot operated speed control. An additional hand operated speed control with or without speed lock is available. Comfortable padded seat available as optional extra. Guaranteed for 12 months against defective parts or faulty workmanship.

4 VENCO - ELECTRONIC - SIT DOWN, Motor: Direct drive 550W (3/4 HP) permanent magnet - no belts or pulleys (nothing to tension, no belt thump) - brushless design (maintenance free) - ultra quiet and incredible low speed torque OPTIONAL EXTRAS: Clip-on tray shelves - hand oiled plywood with aluminium brackets Standard wheel bats - drilled with holes to match wheel. (hand oiled plywood) approx 340mm diameter Riser bats - increased thickness bat for increasing the wheel height above that of the tray rim for throwing large diameter platters etc. Made from hand oiled plywood. Stand-up kit. - stainless steel extension legs for stand-up throwing. Increases wheel height to 84cm (33") from floor level. Leg feet. - extra feet may used to adjust the height of the wheel to personal taste. Up to three feet may be used on each leg. Each foot increases the height of the wheel by 22mm ( 7/8"). A set of three feet (one for each leg) is supplied as standard with each wheel. 330mm (13") wheel with two removable bat pins -constructed from marine grade aluminium Die-cast aluminium tray -constructed from marine grade aluminium -very strong even in class-rooms Two legs under wheel - where greatest stability is required. Wireless foot pedal (radio control). - no trip hazard - simply put it where ever you want it - speed hold feature; set the speed and take your foot off - ergonomic, low profile pedal Intelligent microprocessor based control system for smooth, precise control - super quiet and smooth can be used as a floor or table model (remove legs) 'easy clean' touch pad control on side of wheel - forward and reverse button - finger-tip speed control buttons perfect for speed control while decorating all stainless steel body and legs. Structure guaranteed for 10 years Energy efficient - low power consumption RPM compact for easy storage CE approved 110V- 240V 50/60hz operation 550W Motor, 330mm (13") WHEELHEAD. $1, inc

5 VENCO - ELECTRONIC - SIT DOWN, Electric wheel No. 7 application $ Price on Venco s top of the range pottery wheel. The No.7 model fractures a powerful, permanent magnet, DC motor to deliver exceptional torque throughout the sped range. The No.7 is designed to provide a lifetime of trouble-free throwing for potters who demands control and increased power. The No.7 comes with a three year warranty. Motor: Direct drive 550W (3/4 HP) permanent magnet 330mm (13") wheel with connecting rings Industrial motor speed controller for smooth speed control PRM One price marine grade aluminium splash tray. Low wear poly V-belt drive, for zero slip at low speeds Strong steel body, zinc plated and powder-coated Whisper quite and low vibration operation 48 kg L x W x H 66 x 57 x 45 cm [26 x 22 x 21 ] OPTIONS AVAILABLE: AVAILABLE FOR: $ including GST Three Peg in wheel for fitting bats All Wheels $50.60 Separate Seat Std Cone Drive $ Stand-up Kit Std Cone Drive $ Work Tables Each $82.50 Standard Batt Each $48.40 Riser Batt Each $68.20 SPARE PARTS: AVAILABLE FOR: $ including GST Drive Wheel Assembly All Cone Drive Wheels $ Wheel 280mm (11 ) Complete with shaft Corresponding Wheels $ Wheel Head 330mm (13 ) Complete with shaft Corresponding Wheels $ Motor 180w (1/4HP) + cradle & spring Corresponding Wheels $ Motor 360w (1/2HP) + cradle & spring Corresponding Wheels $ Drive Cone All Cone Drive Wheels $62.15 Bush bearing kits All Cone Drive Wheels $40.70 O Ring All Cone Drive Wheels $2.75 Fibre Washer All Cone Drive Wheels $2.75 Stainless Steel Washer All Cone Drive Wheels $2.75 Shaft Locke All Cone Drive Wheels $38.50 Springs Small All Cone Drive Wheels $9.35 Spring Large All Cone Drive Wheels $15.95 Resilient Polyurethane shaft mounts All Cone Drive Wheels $3.85 Each