See Any Application Accurately

Size: px

Start display at page:

Download "See Any Application Accurately"

Kerrie Grant
5 years ago
Views:

1 See Any Application Accurately WILGER BALL FLOW INDICATORS Using Flow Indicators lets you identify and resolve leaks or plugs, resulting in more accurate application. Flow Indicator Brochure for Planters, Seeders, Sprayers Revised 2017

Cost Effective, Modular & Flexible Ball Flow Indicator Configurations Spot any disruptions in flow immediately.

How to Read Ball Flow Indicators With properly selected balls (based on flow rate), balls are suspended at a desired

Desired Flow Based on Application Ball Suspended Higher Indicates Excess Flow Ball Suspended Lower Indicates

If a ball rises above the others, it indicates excess flow that might be caused by leaking fittings or hoses.

Example Applications AGRICULTURAL Liquid Fertilizer Kits for Planters, Air Seeders, Sprayers TURF & GOLF COURSE Turf

2 Cost Effective, Modular & Flexible Ball Flow Indicator Configurations Spot any disruptions in flow immediately. A glance is all it takes to know that liquid is properly flowing to the outlets of nozzles. How to Read Ball Flow Indicators With properly selected balls (based on flow rate), balls are suspended at a desired level. Desired Flow Based on Application Ball Suspended Higher Indicates Excess Flow Ball Suspended Lower Indicates Blockage If a ball deviates from it s desired level, it can indicate a difference in flow with the outlet tied to that flow indicator column. If a ball drops below the others, it indicates a blockage or plug which is restricting flow. If a ball rises above the others, it indicates excess flow that might be caused by leaking fittings or hoses. To help calculate the flow rate and balls required for your application, consult the tools at Example Applications AGRICULTURAL Liquid Fertilizer Kits for Planters, Air Seeders, Sprayers TURF & GOLF COURSE Turf Sprayers & Liquid Application Equipment INDUSTRIAL Watering, Cooling & Air Distribution Systems Not sure which Flow Indicators to use? There are calculators to help. In the downloads section for the wilger.net website, there are flow indicator calculators to help select your flow indicator metering orifice, flow rate, ball and other fittings that might be needed for your application. 2

Better Engineered Components for Over 40 Years Build your Flow Indicator Kit in 10 Easy Steps STEP 1 Manifold or Isolated Feed Options Manifold and isolated options make it easy to match an

Manifold Feed Isolated Feed Available Options: Standard Flow Low Flow UltraLow Flow Available Options: Standard Flow Low Flow Typical Uses: Single Line Monitoring Squeeze Pump Systems Typical Uses:

STEP 2 Column Flow Options Depending on the flow rates required, different column sizes can provide more accuracy for your application.

70 usgpm TIP: To manually compute the flow rate required for your application, use the following formula: FLOW RATE (us gal/minute) = Applied Rate (US Gal/Acre) x Speed (MPH) x Outlet Spacing

3 Better Engineered Components for Over 40 Years Build your Flow Indicator Kit in 10 Easy Steps STEP 1 Manifold or Isolated Feed Options Manifold and isolated options make it easy to match an application to the right flow indicator. Manifold Feed Isolated Feed Available Options: Standard Flow Low Flow UltraLow Flow Available Options: Standard Flow Low Flow Typical Uses: Single Line Monitoring Squeeze Pump Systems Typical Uses: Multi-line monitoring Liquid Fertilizer Application on Seeders/Planters/Sprayers Uses radialock cap for individual feed lines. STEP 2 Column Flow Options Depending on the flow rates required, different column sizes can provide more accuracy for your application. Ultra Low Flow Column Low Flow Column Standard Flow Column For Flow Rates: 0.01 to 0.24 usgpm For Flow Rates: 0.05 to 0.65 usgpm For Flow Rates: 0.07 to 2.70 usgpm TIP: To manually compute the flow rate required for your application, use the following formula: FLOW RATE (us gal/minute) = Applied Rate (US Gal/Acre) x Speed (MPH) x Outlet Spacing (inches) x # of outlets per flow indicator x Conversion Factor 5940 Weight of Liquid (lbs/us Galllon) Specific Gravity Conversion Factor TIP: Use the Calculators found at Wilger.net to make calculating flow rates simple. STEP 3 Ball Options Depending on the column size chosen, weighted balls will be suspended at a certain level. Ball Options for Ultra Low Flow Orange Plastic Ball (# ) Suggested Flow*: usgpm Green Plastic Ball (# ) Suggested Flow*: usgpm Red Plastic Ball (# ) Suggested Flow*: usgpm Red Glass Ball (# ) Suggested Flow*: usgpm 1/2 Stainless Ball (# ) Suggested Flow*: usgpm *Suggested flow is based on water. Viscosity and density can influence flow levels. Lighter balls may float in dense liquids. Example Application/Selection: RATE: 4.5 US Gallons/Acre WEIGHT of Liquid: 11.5 lbs/ US Gal SPEED: 6 mph OUTLET SPACING: 30 inch Calculated Flow Rate: 0.16 usgpm BALL SUGGESTION: 1/2 Stainless Ball Ball Options for Low Flow Orange Plastic Ball (# ) Suggested Flow*: usgpm Green Plastic Ball (# ) Suggested Flow*: usgpm Red Plastic Ball (# ) Suggested Flow*: usgpm Red Glass Ball (# ) Suggested Flow*: usgpm 1/2 Stainless Ball (# ) Suggested Flow*: usgpm *Suggested flow is based on water. Viscosity and density can influence flow levels. Lighter balls may float in dense liquids. Example Application/Selection: RATE: 10 US Gallons/Acre WEIGHT of Liquid: 11.5 lbs/ US Gal SPEED: 6 mph OUTLET SPACING: 30 inch Calculated Flow Rate: 0.35 usgpm BALL SUGGESTION: 1/2 Stainless Ball Ball Options for Standard Flow Green Plastic Ball (# ) Suggested Flow*: usgpm Red Plastic Ball (# ) Suggested Flow*: usgpm Red Glass Ball (# ) Suggested Flow*: usgpm 1/2 Stainless Ball (# ) Suggested Flow*: usgpm 7/16 Stainless Ball (# ) Suggested Flow*: usgpm *Suggested flow is based on water. Viscosity and density can influence flow levels. Lighter balls may float in dense liquids. Green plastic ball also available in orange (# ) Example Application/Selection: RATE: 15 US Gallons/Acre WEIGHT of Liquid: 11.5 lbs/ US Gal SPEED: 6 mph OUTLET SPACING: 30 inch CALCULATED FLOW RATE: 0.53 usgpm BALL SUGGESTION: Red Glass Ball 3

Cost Effective, Modular & Flexible Ball Flow Indicator Configurations STEP 4 Flow

on, and allow for orifice changing without leaking fluid.

updating an existing flow indicator setup, with large metering orifices that plug

Provides access to all radialock caps, adapters, and COMBO-JET snap-in metering

STEP The tough u-clip design attaches ORS fittings to the control body for

Convenient radialock cap allows for easy cleaning of orifice and strainer.

Indicators can operate without check valve bodies, but are recommended.

piece for safer handling The Combo-Jet orifices snap into a cap, and allow for a

+ + Snap-in Strainer (optional) 4 + + O-ring Combo-Jet Cap Flow Indicator Check

spacing for the same machine. Go from 15 rows to 30 rows in seconds.

Easy setup if all applications are based on the same spacing.

A more advanced setup, allowing for custom control through an air manifold

Bodies can also be ordered without a control module, for use with other

Air pressure determines if a body is shut off.

4 Cost Effective, Modular & Flexible Ball Flow Indicator Configurations STEP 4 Flow Indicator Check Valve Bodies Using check valve bodies greatly reduces fluid run on, and allow for orifice changing without leaking fluid. Wilger has many shut-off options and check valves which make it simple to control your flow, right at the flow indicator. ORS (O-ring seal) to ORS Fitting ORS (O-ring seal) to Radialock Cap Best for updating an existing flow indicator setup, with large metering orifices that plug into any ORS fitting. Provides access to all radialock caps, adapters, and COMBO-JET snap-in metering orifices and strainers. STEP The tough u-clip design attaches ORS fittings to the control body for trouble-free use. Convenient radialock cap allows for easy cleaning of orifice and strainer. COMBO-JET Cap Metering ORS Fitting Metering The ORS orifice is large, so it is easy to change and handle. + + ORS Outlet STEP 5 Shut-Off & Control Module Options [For use with Flow Indicators can operate without check valve bodies, but are recommended. Manual ON/OFF Option Diaphragm Check Valve Option Entire assembly snaps into one piece for safer handling The Combo-Jet orifices snap into a cap, and allow for a snap in strainer too. + + Snap-in Strainer (optional) O-ring Combo-Jet Cap Flow Indicator Check Valve Bodies] Air-Off Module Open Thread Option Great for running alternate spacing for the same machine. Go from 15 rows to 30 rows in seconds. When ON, acts as a check valve*. When OFF, shuts off flow. Easy setup if all applications are based on the same spacing. Standard* check valve turns on flow at 10PSI. A more advanced setup, allowing for custom control through an air manifold controller. Bodies can also be ordered without a control module, for use with other compatible flow control systems, or for body replacement. Air pressure determines if a body is shut off. If no air pressure, acts as check valve. Flow Indicator control bodies require a module to operate. Use only compatible control modules. TIP: All check valves come standard in 10 PSI shut-offs, but are available in low pressure (4PSI) and high pressure (15PSI) check valves as well. These are orderable by replacing the part numbers suffix from -00 to -P4 (for 4PSI) or -P15 (15PSI) Less Flow 4 Still not sure which flow indicator balls to use? More Flow Every application is different. Wilger s calculators and tools can help guide to which ball(s) will work best. Liquid viscosity and even temperature changes can influence where a ball floats, so ensure to test the floating level of balls (and switch if needed) until satisfied.

Better Engineered Components for Over 40 Years Build your Flow

Feed columns only] Wilger has a many fittings for feeding into your

ORS Tee Fittings (Best) Center fed tee fittings provide split flow

ORS Side Feed Fittings (Good) ORS End Feed Fittings (Extra) Manifolds

As an alternative to simply capping off manifold ends, using end feed

Optional 1/4 thread for pressure gauge mounting.

Fittings available in hose barb sizes up to 3/4.

STEP 7 ORS Outlet Fittings Fittings for the flow directly from your

Push-In Tube Fittings Push-in tube fittings for easy hook-up without

available in both straight and 90 fittings.

or vinyl tubing. 1/4, 3/8 and 5/16 sizes avail.

*5/8 size only available in 90 hose barb fittings STEP 8 ORS End Caps,

Fittings for the end of each manifold, as well as fittings that serve

Female Caps Serves as an end cap for the end of manifold flow

5 Better Engineered Components for Over 40 Years Build your Flow Indicator Kit in 10 Easy Steps STEP 6 ORS Feed Fittings [For Manifold Feed columns only] Wilger has a many fittings for feeding into your flow indicator manifold. ORS Tee Fittings (Best) Center fed tee fittings provide split flow suited to manifolds. ORS Side Feed Fittings (Good) ORS End Feed Fittings (Extra) Manifolds can be fed from a side fitting. As an alternative to simply capping off manifold ends, using end feed fittings can improve flow performance. Optional 1/4 thread for pressure gauge mounting. Stacking consecutive flow indicators can impact accuracy of level shown on indicator. Available in 1 NPT-F or ORS Fitting feeds (up to 3/4 hose). Fittings available in hose barb sizes up to 3/4. Fittings available up to 1/2 NPT-F. STEP 7 ORS Outlet Fittings Fittings for the flow directly from your flow indicators to your outlet or opener. Push-In Tube Fittings Push-in tube fittings for easy hook-up without hose clamps Hose Barb Fittings Threaded Fittings 1/4 NPT-F threads available in both straight and 90 fittings. Straight and 90 hose barb fittings Ideally use semi-rigid polyethylene or vinyl tubing. 1/4, 3/8 and 5/16 sizes avail. 3/8, 1/2, 5/8 *, 3/4 sizes avail. *5/8 size only available in 90 hose barb fittings STEP 8 ORS End Caps, Adapters & Misc. Fittings for the end of each manifold, as well as fittings that serve as adapters in advanced setups. Female Caps Serves as an end cap for the end of manifold flow indicator setups Female to Male Adapters 90 & straight adapters available Male Plugs Serves as a plug for any flow indicator setup Wilger Flow Indicator Columns have the Best In Class Clarity and Chemical Resistance All of the Wilger ball flow indicator columns are molded as a single piece out of a specialty plastic that provides the best chemical resistance possible while maintaining the utmost clarity. When used with O-rings, it becomes a veritable powerhouse for most chemical applications. As all O-ring seal fittings do not require any threading, they can be spun 360 without risk of diconnection or leaking. 5

Cost Effective, Modular & Flexible Ball Flow Indicator Configurations STEP 9 Metering s Selecting the correct size of orifices is crucial to having an accurate and consistent application.

Use the standard orifice calculators on the Wilger website to determine which size/pressure will work best for your application.

6 Cost Effective, Modular & Flexible Ball Flow Indicator Configurations STEP 9 Metering s Selecting the correct size of orifices is crucial to having an accurate and consistent application. Standard Sized s (ISO Color coded to flow rate) Available in incremental flow rates which are precision molded to provide pinpoint application. Use the standard orifice calculators on the Wilger website to determine which size/pressure will work best for your application. Custom Sized s (specific hole size) Available in a number of incremental hole sizes, which are precision drilled to match any required application flow rate. Use the custom orifice calculators on the Wilger website to determind which size/pressure will work best for your application. Standard Sized Combo-Jet Cap s For selecting metering orifices for ORS to Radialock check valve bodies [step 4], use Tip Wizard or refer to the Combo-Jet tip-cap brochure for orifice flow rates and part numbers. STEP 10 Flow Indicator Kit Assembly It will now be easy to assemble and install each flow indicator column into their respective manifolds. A Note on Consecutive Manifold Stacking for High Flow Applications Even though Flow Indicator manifolds can be stacked infinitely, to maximize accurate responsiveness with the least amount of pressure loss through the manifold, stacking of max 5 consecutive columns. For any manifold requiring more than 5 columns, simply split the manifold bank(s) with ORS Tee feeds or use an ORS end feed to supplement flow. [For examples of ORS Tee/End Feeds - See Step 6] Each ORS fitting comes with the required stainless steel u-clip(s) (part # ) to assemble it correctly. 1. Female ORS to Male ORS Assembly Simply, remove the u-clip from the ORS female end, insert the ORS male end, and insert the u-clip through the lined up hole until it comes out the other side. Installation is universal (there is no left/right). 2. 1/4 Bolt Mount Assembly Use the standard 1/4 bolt mount holes with slotted plate or square/round tube brackets (refer to Wilger catalog) to conveniently mount Flow Indicators to any equipment. 3. Final Configurations and Considerations Many applications can benefit from non-standard configurations, so it is recommended to review all component options (i.e. tees with 1/4 NPT-F threads for pressure gauges) to ensure the configuration provides as much benefit as possible. Want to assemble O-ring seal (ORS) parts like a PRO? To easily assemble flow indicator manifolds, lightly lubricate each O-ring seal with liquid silicone. Lubrications ensures that each ORS fitting slips together effortlessly. 6

Better Engineered Components for Over 40 Years Flow Indicator & O-ring Seal (ORS) Parts List Parts for STEP 1 3 Flow Indicator

7 us gpm KIT* KIT KIT KIT KIT KIT KIT 20475-V0 20475-00 20475-01 20470-V0 20470-00 20470-01 20460-V0 20460-00 20460-01 *Manifold

(#20460-08), Red Plastic Ball (#20460-07), Red Glass Ball (#20460-06), 1/2 Stainless Ball (#20460-15) Isolated Feed Columns LOW

7 us gpm KIT** ISOLATED KIT ISOLATED KIT 20490-00 20490-01 20480-00 20480-01 **Isolated Kits include: Flow Indicator Body, Ball

Stainless Ball (#20460-15) Parts for STEP 4 5 TYPICAL* OPERATING RANGES FOR FLOW INDICATOR BALLS (US Gal/min) BALL 20460-00 [kit]

0 US gpm Max Operating Temperature: 185 F / 85 C O-ring Seal Materials: Buna-N or U-clip Material: Stainless Steel ORS Fitting

20460-03 Tee Feeds TEE Feeds ORS TEE [ORS-M x ORS-F x ORS-M] ORS TEE w/ 1/4" NPT-F [ORS-M x 1/4" NPT-F x ORS-F x ORS-M] 3/8" NPT-F

20524-00 20525-V0 20525-00 0.01-0.04 0.05-0.12 0.07-0.25 GREEN POLYPROP BALL 20460-08 0.01-0.04 0.05-0.12 0.07-0.25 RED CELCON BALL 20460-07 0.

65 0.40-1.70 7/16" STAINLESS STEEL 20460-10 n/a n/a 1.00-2.

Air OFF Operated Check Valve 20524-00 20525-00 20562-00 Works as 10PSI* check valve. When air is on, shuts off flow.

Below is for Manifold Feed Columns ONLY. [For Isolated Feed Column feeds, consult Combo-Jet cap brochure or Wilger price list.

20512-V0 20502-00 20512-00 20514-V0 20514-00 20503-V0 20513-V0 20503-00 20513-00 Threaded End Cap Feeds 20522-00 20460-06 ORS Male

3/4" 1/4 NPT-F [Drill open for pressure gauge] 20460-07 20460-11...MANIFOLD FEED COMPONENTS KIT (w/o Indicator Body) 20480-02.

.. - #212 (For ORS Body and Fittings) 20460-15.

20552-00 20553-00 20560-V0 20561-V0 20562-V0 20563-V0 ORS Male to COMBO-JET Cap 20560-00 20561-00 20562-00 20563-00 optional - if

Contact factory for 4PSI & 15PSI check valve options.

7 Better Engineered Components for Over 40 Years Flow Indicator & O-ring Seal (ORS) Parts List Parts for STEP 1 3 Flow Indicator Columns, Balls, & Kits Manifold Feed Columns ULTRA LOW FLOW us gpm LOW FLOW us gpm STANDARD FLOW us gpm KIT* KIT KIT KIT KIT KIT KIT V V V *Manifold Kits include: Flow Indicator Body, Ball Retainer (# ), O-ring seal (#20460-XX), 2x U-clips (# ), Green Ball (# ), Red Plastic Ball (# ), Red Glass Ball (# ), 1/2 Stainless Ball (# ) Isolated Feed Columns LOW FLOW us gpm STANDARD FLOW us gpm KIT** ISOLATED KIT ISOLATED KIT **Isolated Kits include: Flow Indicator Body, Ball Retainer (# ), U-clip (# ), Green Ball (# ), Red Plastic Ball (# ), Red Glass Ball (# ), 1/2 Stainless Ball (# ) Parts for STEP 4 5 TYPICAL* OPERATING RANGES FOR FLOW INDICATOR BALLS (US Gal/min) BALL [kit] [body only] Flow Indicator Column Specifications* Max Operating Pressure: 100 PSI (7 BAR) Max Metered Flow Rate: Up to 8.0 US gpm Max Operating Temperature: 185 F / 85 C O-ring Seal Materials: Buna-N or U-clip Material: Stainless Steel ORS Fitting Material: Glass-Reinforced Polypropylene Body Material: Molded from special UV and chemically resistant material Tee Feeds TEE Feeds ORS TEE [ORS-M x ORS-F x ORS-M] ORS TEE w/ 1/4" NPT-F [ORS-M x 1/4" NPT-F x ORS-F x ORS-M] 3/8" NPT-F x ORS TEE [ORS-F x 3/8" NPT-F x ORS-M] 1" NPT-F x ORS TEE [ORS-M x 1" NPT-F x ORS-M] V V V V GREEN POLYPROP BALL RED CELCON BALL RED GLASS BALL /2" STAINLESS STEEL /16" STAINLESS STEEL n/a n/a When ON, works as 10PSI* check valve. When OFF, shuts off flow. Air OFF Operated Check Valve Works as 10PSI* check valve. When air is on, shuts off flow Heaviest/Higher Flow Open Thread Option Must be used with a compatible system, or shut-off module. Below is for Manifold Feed Columns ONLY. [For Isolated Feed Column feeds, consult Combo-Jet cap brochure or Wilger price list.] Hose Barb Feeds ORS Male Hose Barbs 3/8" 1/2" 5/8" Straight Hose 90 Hose Barb Barb V V V V V V V Threaded End Cap Feeds ORS Male to COMBO-JET Cap Manual ON/OFF Check Valve Turns flow OFF at 10PSI*. 3/4" 1/4 NPT-F [Drill open for pressure gauge] MANIFOLD FEED COMPONENTS KIT (w/o Indicator Body) ISOLATED FEED COMPONENTS KIT (w/o Indicator Body) BALL RETAINER LOCK U-CLIP, 302SS #212 (For ORS Body and Fittings) #212 (For ORS Body and Fittings) Diaphragm Check Valve Parts for STEP 6 Tee & Feed Fittings STANDARD ORS Male to ORS Female DIA.CHK MANUAL AIR-OFF OPTIONAL VALVE ON/OFF OPERATED NUT V V V V0 ORS Male to ORS Female V V V V0 ORS Male to COMBO-JET Cap optional - if check valve body is not used, in-line check valve is recommended. *10PSI check valves are standard. Contact factory for 4PSI & 15PSI check valve options. LOW ORANGE POLYPROP BALL Lightest/Lower Flow Check Valve Bodies ULTRA LOW *Density/Viscosity of liquid used can effect operating range. In very dense liquids, balls may float. [ORS Fittings] USING THE FLOW INDICATOR End Cap Model 1/4" NPT-M 1/4" NPT-F 3/8" NPT-F 1/2" NPT-F ORS Fittings are TOUGH. ORS Fittings are made out of premium glass-reinforced polypropylene for the ultimate durability and chemical resistance. All ORS fittings are available with O-rings, for those tough applications that require better chemical resistant O-rings. As all O-ring seal fittings do not require any threading, they can be spun 360 without risk of disconnection. 7

Parts for STEP 7 ORS Outlet Fittings, End Caps, Plugs & Metering s 9 Push-In Tube ORS Fittings 1/4" 90 Push-In Tube 5/16" 90 Push-In Tube 3/8" 90

Female NPT 1/2" Female NPT Female Plug Cap 20523-00 20529-V0 () 20529-00 () 20530-00 20535-00 20536-00 20537-00 20521-00 ORS Metering s - Use the

net to easily pick metering orifices Part#* 21009-XX 21011-XX 21013-XX 21015-XX 21018-XX 21500-V005 21020-XX 21022-XX 21500-V007 21025-XX 21026-XX

20PSI 30PSI 40PSI 0.00 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.01 0.01 0.01 0.02 0.02 0.02 0.01 0.01 0.02 0.02 0.03 0.03 0.01 0.02 0.03 0.03 0.04 0.

03 0.04 0.05 0.06 0.07 0.09 0.32 0.46 0.56 0.65 0.79 0.91 0.03 0.05 0.06 0.07 0.09 0.10 0.04 0.05 0.06 0.07 0.09 0.10 0.04 0.05 0.07 0.08 0.09 0.11 0.

07 0.10 0.13 0.14 0.18 0.20 0.08 0.11 0.13 0.15 0.19 0.

21061-XX 21063-XX 21500-V05 21064-XX 21065-XX 21067-XX 21500-V06 21070-XX 21073-XX 21075-XX 21078-XX COMBO-JET Nozzle Bodies Flow Rate (US

14 0.17 0.19 0.24 0.27 0.10 0.15 0.18 0.21 0.26 0.29 0.11 0.15 0.18 0.21 0.26 0.30 0.11 0.16 0.20 0.23 0.28 0.32 0.12 0.17 0.21 0.24 0.29 0.33 0.13 0.

25 0.31 0.35 0.43 0.50 0.18 0.25 0.31 0.36 0.44 0.51 0.18 0.26 0.32 0.37 0.45 0.52 0.20 0.28 0.34 0.39 0.48 0.56 0.21 0.30 0.37 0.42 0.52 0.60 0.22 0.

77 COMBO-RATE Modular Nozzle Bodies 20501-00 20511-00 End Caps & Plugs 20519-00 Adapters 3/8" NPT-F x BLIND ORS TEE [BLIND ORS-F x 3/8" NPT-F x

20502-V0 20512-V0 20502-00 20512-00 20514-V0 20514-00 20503-V0 20513-V0 20503-00 20513-00 Part#* 21500-V08 21081-XX 21083-XX 21086-XX 21089-XX

21130-XX 20529-00 20529-00 Flow Rate (us gallons/minute) 5PSI 10PSI 15PSI 20PSI 30PSI 40PSI 0.28 0.40 0.49 0.57 0.69 0.80 0.29 0.41 0.50 0.58 0.71 0.

05 0.39 0.55 0.67 0.77 0.95 1.09 0.42 0.59 0.72 0.83 1.02 1.18 0.44 0.62 0.76 0.88 1.08 1.25 0.46 0.65 0.80 0.92 1.13 1.30 0.48 0.68 0.83 0.96 1.17 1.

72 0.63 0.89 1.09 1.26 1.54 1.78 0.69 0.98 1.20 1.39 1.70 1.96 0.71 1.00 1.22 1.41 1.73 2.00 0.72 1.02 1.25 1.45 1.77 2.04 0.75 1.06 1.30 1.50 1.84 2.

79 2.19 2.53 0.93 1.31 1.61 1.85 2.27 2.62 0.95 1.35 1.65 1.90 2.33 2.69 1.02 1.44 1.77 2.04 2.50 2.89 1.05 1.49 1.82 2.10 2.58 2.98 1.10 1.55 1.90 2.20 2.

61 4.17 1.56 2.21 2.70 3.12 3.82 4.41 1.73 2.45 3.00 3.46 4.24 4.90 1.87 2.65 3.25 3.75 4.59 5.30 2.02 2.85 3.49 4.03 4.94 5.70 2.11 2.98 3.65 4.21 5.

00 21136-XX 21140-XX 21144-XX 21147-XX 21150-XX 21152-XX 21156-XX 21161-XX 21166-XX 21172-XX 21177-XX 21182-XX 21187-XX 21196-XX 21205-XX 21213-XX

O-ring #40225-05) Note: O-rings are standard with 21500-VXXX orifice series Wilger Boom End Flush Valve Wilger Ball Flow Indicators NEW for 2017

8 Parts for STEP 7 ORS Outlet Fittings, End Caps, Plugs & Metering s 9 Push-In Tube ORS Fittings 1/4" 90 Push-In Tube 5/16" 90 Push-In Tube 3/8" 90 Push-In Tube Hose Barb ORS Fittings (more pictures on previous page) V V V ORS Male Hose Barbs [side profile] Female Thread ORS Fittings 90 1/4"NPT-F 1/4" NPT-F 3/4" ORS ELBOW [ORS-M x ORS-F] 3/8" NPT-F x ORS TEE [ORS-F x 3/8" NPT-F x ORS-M] BLOCKED PORT V V V /4" Male Plug 1/4" Male NPT 1/4" Female NPT 3/8" Female NPT 1/2" Female NPT Female Plug Cap V0 () () ORS Metering s - Use the calculators at to easily pick metering orifices Part#* XX XX XX XX XX V XX XX V XX XX XX XX V XX XX V XX XX XX V XX Flow Rate (US gallons/minute) 5PSI 10PSI 15PSI 20PSI 30PSI 40PSI COMBO-JET Fertilizer Streamer Tips Part#* XX V XX XX XX V XX XX XX V XX XX XX V XX XX XX V XX XX XX XX COMBO-JET Nozzle Bodies Flow Rate (US gallons/minute) 5PSI 10PSI 15PSI 20PSI 30PSI 40PSI COMBO-RATE Modular Nozzle Bodies End Caps & Plugs Adapters 3/8" NPT-F x BLIND ORS TEE [BLIND ORS-F x 3/8" NPT-F x ORS-M] 1/2" 5/8" V V TEES & FEEDS 3/8" Straight Hose 90 Hose Barb Barb V V V V V V V Part#* V XX XX XX XX V XX XX XX V XX XX XX V XX XX XX XX XX V XX XX Flow Rate (us gallons/minute) 5PSI 10PSI 15PSI 20PSI 30PSI 40PSI ORS Manifolds & Components Part#* Flow Rate (US gallons/minute) 5PSI 10PSI 15PSI 20PSI 30PSI 40PSI XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX *Replace -XX with: -00 for Buna-N O-ring assembly (Replacement O-ring # ) -V0 for O-ring assembly (Replacement O-ring # ) Note: O-rings are standard with VXXX orifice series Wilger Boom End Flush Valve Wilger Ball Flow Indicators NEW for 2017 CANADA Wilger Industries Ltd. Group Box 280 RR#4 71ST St. & Highway 16W Saskatoon, SK, Canada S7K 3J7 Phone: (306) Fax: (306) info@wilger.net UNITED STATES Wilger Inc. 255 Seahorse Drive Lexington, TN, USA Phone:(877) / (731) Fax: (877) / (731) wilgeresc@bellsouth.net ARGENTINA Wilger Argentina Mitre 697, San Nicolas (2900) Buenos Aires, Argentina Phone: cjporras@gmail.com Publication # Printed In Canada

& PumpRight for PWM Control. Maximum Pump Flow and Application Rates. Max Flow GPM

& PumpRight for PWM Control. Maximum Pump Flow and Application Rates. Max Flow GPM 396-001070 PumpRight Fertilizer System for John Deere GS2 2600 & GS3 2630 & PumpRight for PWM Control Maximum Pump Flow and Application Rates Number of Diaphragms Max Flow GPM Max GPA on 40 at 6 MPH Max