Operation Manual. Model & 110 Gallon Preservative Applicator OPR 10/15

Size: px

Start display at page:

Download "Operation Manual. Model & 110 Gallon Preservative Applicator OPR 10/15"

Vernon Golden
5 years ago
Views:

1 Operation Manual Model 9 00 & 0 Gallon Preservative Applicator 9--OPR 0/

2 (intentionally blank)

3 Harvest Tec Model 9 Operation Table of Contents Page Introduction Installation Kit Reference Chart - Safety Safety Decals Safety Location 7 Preparing the applicator for operation 8 Filling the tank 8 Operation of the main ball valve 8 Connecting the power harness 9 Operation of the control 9 Understanding and using the control 9 Message light 9 First time and annual start up 0 Field operation 0 Calibration 0 Determining tons per hour for large square balers 0 Determining the rate of chemical Selecting tips and setting pressure General calibration chart for two nozzles Maintenance - Maintenance schedule Filter bowl cleaning Miscellaneous maintenance Tip & tip screen cleaning Tank lid cleaning Dielectric grease connections Rebuilding pump Battery connection Winter storage Troubleshooting Parts breakdown - Tank, Saddle & Legs -8 Vermeer, Claas & Krone Balers CNH, AGCO, Krone, John Deere L0 / L0 balers 7-8 Control Box, Wiring Harnesses, Gauge, Pump Assembly 9 Installation Kits 0-8 Installation Kit 0 9 Installation Kit 90 Installation Kit 9 Installation Kit 9 Installation Kit 9 Installation Kit 9 & 8 Installation Kit 97 & 9 Installation Kit 7 98 Installation Kit 8 99 Installation Kit 9 00 Installation Kit 0 0 Installation Kit 09 Installation Kit 0 Installation Kit Installation Kit Installation Kit Installation Kit

4 Table of Contents (continued) 8 Installation Kit 7 9 Installation Kit 8 Installation Kit 9 J Installation Kit 0 7 Installation Kit 0 Installation Kit 9 Installation Kit 0 Installation Kit Installation Kit Installation Kit Warranty Statement 7 Page Introduction Thank you and Congratulations on purchasing a Harvest Tec Model 9 Applicator. This applicator is designed to apply a buffered propionic acid on to the forage crop as it is being baled. The applicator is designed to allow the operator to adjust the rate of preservative on the go for changing moisture and baler throughput. This manual will take you through the steps of operation of the applicator and also point out all safety precautions that need to be made while using the applicator. Read this manual carefully to learn how to operate the equipment correctly. Failure to do this can result in personal injury or equipment malfunction. If you are unsure about operating the system after consulting this manual, contact your local authorized dealership for additional assistance. If you are in need of parts for the system please see the parts breakdown in the back of this manual and contact your local authorized dealer to order the parts. This applicator is designed to apply Harvest Tec buffered propionic acid. Right and Left sides are determined by facing in the direction of forward travel. Installation Kit Reference Chart: Baler Make Model Install kit AGCO Roto-Cutter 790 Roto-Cutter Roto-Cutter Roto-Cutter CASE IH LBX- Std or Packer LBX- Roto-Cutter LB LB Std or Packer LB LB Roto-Cutter LB (0 and newer) Std or Packer LB (0 and newer) Roto-Cutter CHALLENGER LB LB LB LBB LBB LBB LBB Roto-Cutter LBB LBB Packer Cutter

5 CLAAS 00 / 00 / 00 / KRONE VFS 88 & 8 VFS 88 & 8 Cutter XC BP x, BP x HS XC High Speed , 90, 90HDP, x XC HS 00- KUHN LSB LSB70 90 Omni-Cut JOHN DEERE L0 / L0 00-J MASSEY FERGUSON NEW IDEA NEW HOLLAND VERMEER SQ7 SQ7 VICON LB 800 LB ROTO-CUTTER 0 90, , 0 90 Roto-Cutter 0 90 Packer Cutter 70 XD Roto-Cutter 0 & 70 ProCut 90-BB90A Std or Packer 9-BB90A Std or Packer BB90-BB90A Roto-Cutter BB90-BB90A Roto-Cutter BB900 BB9080 Std or Packer BB900 BB9080 Roto-Cutter BB9080 (0 and newer) Std or Packer BB9080 (0 and newer) Roto-Cutter Safety Carefully read all the safety information and decals in this manual and on the applicator before use. Keep signs clean and in good working order. Replace missing or damaged safety signs. Replacement signs are available from your local authorized dealer. See your installation manual for under the replacement parts section for the correct part numbers. Keep your applicator in proper working condition. Unauthorized modifications to the applicator may impair the function and/or safety of the machine. Carefully read and understand all of the baler safety signs before installing or servicing the baler. Always use the supplied safety equipment on the baler to service the applicator.

DCL-800 Number Use caution when working around

Wear all protective equipment according to the

DCL-800 Number Read and understand the operator s

6 Safety Decals Number Spraying hazard. Disconnect power before servicing the applicator Part no. DCL-800 Number Falling hazard. Do not step in this area. Part no. DCL-800 Number Use caution when working around chemicals. Wear all protective equipment according to the label of the product. Part no. DCL-800 Number Read and understand the operator s manual before using or working around the equipment. Part no. DCL-8000 Number Open (unlocked) and closed (locked) position of the ball valve. Part no. DCL-800

7 Safety Decal Locations,,, 7

Preparing the applicator for operation After the Applicator has been installed on the baler, follow the below steps to prepare for operating the applicator both safely and correctly.

Open the cam-couplers (A) and remove the protective plug (B). Insert the male coupler (found on transfer pump) into the female cam and close the cams (A).

Monitor the level on the tank visually and shut off the pump before over filling. Once the pump is turned off, close the ball valve and remove the male coupler.

Water is recommended for first time and annual start up procedures. C A B Drain/Fill line on the baler Enlarged view of the drain/fill line valve and cam-coupler assembly.

8 Preparing the applicator for operation After the Applicator has been installed on the baler, follow the below steps to prepare for operating the applicator both safely and correctly. Filling the tank: Read the label of the product being filled into the tank to determine what individual protective measures need to be taken. Locate the drain/fill line on the baler. Open the cam-couplers (A) and remove the protective plug (B). Insert the male coupler (found on transfer pump) into the female cam and close the cams (A). To open the ball valve (C) turn the handle so it is vertical. After the ball valve has been turned on switch the pump to the On position. Monitor the level on the tank visually and shut off the pump before over filling. Once the pump is turned off, close the ball valve and remove the male coupler. The handle of the ball valve (C) will be horizontal when closed. Reinstall the protective plug and close the cams. The Harvest Tec model 9 transfer pump is recommended for this process. Water is recommended for first time and annual start up procedures. C A B Drain/Fill line on the baler Enlarged view of the drain/fill line valve and cam-coupler assembly. A Operation of the main ball valve The ball valve should be closed at all times when the applicator is not being used. The valve should also be closed when any service work is being done to the baler or applicator. The valve is located next to the pump and by the applicator tank. The arrow below points at the valve. Valve open Valve closed 8

Connecting the power harness The power harness that supplies power from the tractor battery to the applicator pump has a disconnect at the hitch. Connect the two together for operation.

9 Connecting the power harness The power harness that supplies power from the tractor battery to the applicator pump has a disconnect at the hitch. Connect the two together for operation. Always disconnect before servicing the applicator or baler. Operation of the Control Understanding and using the control The model 7 control is pictured below. The toggle switch (A) is used to supply and cut off power to the pump. With the switch in down (shown) the power is off. Lift the switch up to supply power. The dial (B) is used to adjust the pressure to the tips when power is applied. Use the numbers on the dial only as reference. The PSI on the gauge determines the exact flow. Apply the correct rate decal found with your manual to the front of the control box. The message light (C) will always be illuminated when the power is on. If the light ever blinks during operation please reference the manual section Message light. C B A Message Light The LED under the speed dial will be steady on when the applicator is running under normal situations. If the light blinks on and off use the information below to interpret the message. Slow steady on and off blink: The system is attached to hay indicators (7A) or a foot switch. This message means that the pump is paused. Light will come on constant once the baler is back in the windrow. Two quick blinks: The pump motor or pump harness is shorted. Three quick blinks: Pump motor is over the current limit (0 amps). Four quick blinks: Power is under current from a bad connection. Control box must have the on/off switch toggled to clear the message after the fault has been fixed to clear. 9

10 First time and annual start up After familiarizing yourself with the model 7 control, fill the tank with gallons of water. Turn on the power to the pump by pushing the toggle switch up. You might hear the buzzing of the motor. Turn the dial on the control box until the pressure gauge starts to climb. By turning the dial clockwise the pressure will go up. By turning the dial counter clockwise the pressure will decrease. With the applicator spraying at about 0 PSI, look for leaks at all the hose connections and fittings. When you are comfortable with the operation of the controls you can set the applicator to apply the amount of chemical you would like it to put on. Field operation Calibration There are three things that you need to know when calibrating your applicator. First you need know how many tons per hour you bale. Second you need to know the rate, or how many pounds of product to apply for a given ton per hour. Finally you need to know what tips to use and at what pressure to set the gauge. Determining your tons per hour. Time bales and average the time it takes to make a bale.. Estimate the weight of the bale.. Use the Bale Rate Chart below to determine the tons you are harvesting per hour. Example: You are baling 000 pound bales, with minutes of time per bale. Looking at the chart below your tons per hour is. Large Square Bale Rate Chart (tons per hour) Weight per bale 0

11 Determine the Rate of Chemical The number of pounds of chemical required to be applied to a given ton of hay, depends on the moisture and the type of chemical used. The moisture of the hay is important in determining how much chemical to use. By knowing the moisture, you can make sure you are treating the hay correctly. Under applying will save money but spoilage most likely occurs. Over applying will waste money however, the hay will be saved. Some chemicals require more or less to treat the same amount of hay. To find the exact number of pounds required, for a given hay moisture, refer to the label on the drum or contact the manufacture. Harvest Tec applicators come with a set of low, medium, and high tips. If your chemical requires rates other than what these tips deliver you will need to purchase them through your dealer. Selecting Tips and Setting Pressure Once you have determined your tons per hour and the amount of chemical needed for the moisture you are applying at, you can select your tips and determine your gauge settings.. Multiply the tons per hour by the amount of chemical required for the moisture you are applying at. This sum will give you the application rate.. Select the proper set of tips from the application rate chart and install them.. For the tips you have selected, you will need to keep the gauge at the recommended PSI to achieve the proper application rate.. Set the pressure by adjusting the dial on the control box and by reading the pressure of the gauge to match the desired rates. The numbers on the dial are for reference only. Rate is determined by watching the pressure gauge. Example: You are baling at tons per hour with your large square baler. The moisture that you are baling at requires you to apply pounds per ton. Multiply the tons x lbs = 7 lbs per hour. Using the chart on page 8 you will notice the orange set of tips at 0 PSI will give you that output.

12 General calibration charts Pounds per hour with two nozzles YELLOW ORANGE GREEN BLUE BROWN SET SET SET SET SET 80007PT TT00VP TT00VP TT00VP TT00VP PSI Gallons per hour with two nozzles YELLOW ORANGE GREEN BLUE BROWN SET SET SET SET SET 80007PT TT00VP TT00VP TT00VP TT00VP PSI *ONLY THE OPERATOR CAN DETERMINE HOW MUCH PRODUCT IS APPLIED.

connections X X Visually inspect hoses X X Filter bowl cleaning: Before cleaning the filter bowl all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron,

13 Maintenance If you are unsure how to perform any of the maintenance steps have your local authorized dealer perform the tasks. Maintenance Schedule Daily 0 hrs 00 hrs Weekly Monthly Season Filter bowl cleaning X X Tips & tip screen cleaning X X Tank lid cleaning X X Dielectric grease connections X X Rebuild pump X Battery connections X X Visually inspect hoses X X Filter bowl cleaning: Before cleaning the filter bowl all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron, boots, and gloves). Verify that the ball valve located next to the pump is turned off. Locate the filter bowl on the side of the pump manifold (A). Unscrew the bottom section of the filter bowl and remove the strainer (B). Clean off any debris and soak in warm water with a mild soap if necessary. Once the screen is clean reinstall by following the directions in reverse. A B Miscellaneous maintenance:. Depending on the product being used, the system may need to be flushed with water at a regular interval (consult with manufacturer of the chemical). If Harvest Tec product is being used, flushing is not necessary.. Although the pump can run dry, extended operation of a dry pump will increase wear. Watch the preservative level in the tank.. If you are using bacterial inoculants, flush your system daily after every use.

Tips & tip screen cleaning: Before cleaning the tips and screens all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron, boots, and gloves).

Some models may require a wrench to remove. Clean off any debris and soak tip and screen in warm water with a mild soap if necessary.

14 Tips & tip screen cleaning: Before cleaning the tips and screens all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron, boots, and gloves). Verify that the ball valve located next to the pump is turned off. Disconnect spray shield from hangers if possible or remove tips in place. Remove the tip, and screen. Some models may require a wrench to remove. Clean off any debris and soak tip and screen in warm water with a mild soap if necessary. Once the tips and screens are cleaned reinstall by following the directions in reverse. Tank lid cleaning: Before cleaning the tank lid all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron, boots, and gloves). The tank lid is located on the top of the tank. Use the supplied handle on the tank to secure your person and use the other hand to remove any debris from the top of the tank. Unscrew the tank lid and bring down ground level. Use compressed air clean out the tank screen (D). If the screen cannot be thoroughly cleaned with compressed air, replace fitting (00-90B). Once the screen is cleaned reinstall the cover. D Dielectric grease connections: Disconnect all harnesses on the applicator, clean the connections, and repack with dielectric grease. Rebuild pump: If the pump is not working up to specifications a pump rebuild kit may fix the problems. Verify that the ball valve is turned off. Before working around the pump all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron, boots, and gloves). Disconnect all pump fittings and remove pump from saddle. Follow rebuild instructions supplied with pump rebuild kit. Reinstall after rebuild is complete. Battery connections: Follow the batteries safety warnings and clean the battery connections. If the connections cannot be cleaned, replace harness. Winter Storage. Thoroughly flush the system with water.. Remove the filter bowl and run dry until the water has cleared out of the intake side.. Remove the red plug from the bottom of pump, drain, and run the pump for 0 seconds or until dry.. Drain all lines on the outlet side.. Never use oils or alcohol based anti-freeze in the system.. For spring start-up, if the pump is frozen, turn off the power immediately to avoid burning the motor out or blowing a fuse. The pump head can be disassembled and freed or rebuilt in most cases. Check the fuses after the pump has been freed. 7. Disconnect power from the applicator 8. Remove display from tractor and store in a warm, dry place.

15 Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION Pump will not run.. Circuit breaker tripped on electronic unit.. Check for short, low voltage, and reset breaker.. Pump locked up.. Clean or rebuild pump.. Damaged wire.. Repair damaged wire.. Vapor locked.. Loosen hose by check valve at gauge and bleed air. Pump runs but will not prime.. Air leak in intake.. Tighten fittings on intake side.. Clogged intake.. Clean.. Restricted outlet.. Check and clean tips.. Check valve on outlet. Clean or repair check valve. stuck closed.. Dirt inside pump.. Replace pump check valve. Pump does not develop enough output.. Air leaks or clogs on inlet side.. Tighten or clean filter bowl assembly.. Electronic box out of. Refer to box adjustment page. adjustment.. Pump worn or dirty.. Rebuild pump.. Low supply voltage.. Check voltage at connection with voltmeter.. Bad gauge.. Gauge should read less than 0 PSI when not in use. Also tips should lose spray pattern below 0 PSI. Check accuracy. Pump output varies.. Clogged or restricted inlet.. Clean. Worn pump parts.. Rebuild pump. Message light blinks two times. Pump or wire harness shorted. Message light blinks three times. Pump is drawing greater than 0 amps. Message light blinks four times. Undercurrent coming to control box.. Check harness running to pump and verify no shorts or problems.. Check to see if pump motor is locked up. Repair or replace.. Check to see if motor is running correctly. Repair or replace.. Check all battery connections and connections running up to control box.

Vermeer, Claas, and Krone Balers with 00 gallon

Tank Lid 00-90C 00 gal Tank 00-90 Tank Straps 00-0

Tank Saddle 00-70A Vermeer, Claas and Krone Balers

16 Vermeer, Claas, and Krone Balers with 00 gallon tank Parts Breakdown Tank, Saddle & Legs 00 Gallon Tank Lid 00-90C 00 gal Tank Tank Straps 00-0 Tank fittings / Not Pictured: Elbow 00-EL Tank Saddle 00-70A Vermeer, Claas and Krone Balers Saddle Legs Part#: 00-70V Claas 00 Saddle Legs Part #: 00-70C

Tank, Saddle and Legs 0 Gallon Tank Lid Part#: 00-90E Tank-0 gallon Part#: 00-908

Tank Saddle Part#: 00-707A Tank Fitting Part#: 00-900 Agco, Hesston, Massey &

Series Saddle Legs Not Pictured: Vicon Leg Spacers: Part#: 00-707BS (x) Left Leg

17 Tank, Saddle and Legs 0 Gallon Tank Lid Part#: 00-90E Tank-0 gallon Part#: Hand Rail Part#: HR Tank Straps Part#: 00-0B Not Pictured: Elbow Part#:00-EL Tank Saddle Part#: A Tank Fitting Part#: Agco, Hesston, Massey & Challenger Saddle Legs Part#: C New Holland BB90A, BB90A, Case IH LBX, LBX Series Saddle Legs Not Pictured: Vicon Leg Spacers: Part#: BS (x) Left Leg Part#:00-707BL (00 and older ft wide) Right Leg Part #:00-707BR (00 and older ft wide) 7

Tank, Saddle and Legs 0 Gallon (continued)

Series Saddle Legs Left Leg Part#: 00-707DL

00-707DR (0 and newer ft wide) Krone Balers

18 Tank, Saddle and Legs 0 Gallon (continued) New Holland BB90A, BB90A, Case IH LBX, LBX Series Saddle Legs Left Leg Part#: DL (0 and newer ft wide) Right Leg Part #: DR (0 and newer ft wide) Krone Balers Part#: KA John Deere L0 / L0 Part#: J

Parts Breakdown for Control Box and Wiring Harnesses, Gauge, and Pump Assembly Ref

U-bracket 00-0E Crop eye plug 00-700Z Ref Description Part # Qty Gauge 00-08Z Gauge Holder

Non-AGCO Balers 8 7 Ref Description Part # Qty Pump 007-0S Elbow 00-EL8 Reducing Nipple

Description Part # Qty Pump 007-0S Elbow 00-EL8 Reducing Nipple 00-M8 Filter Bowl 00-

19 Parts Breakdown for Control Box and Wiring Harnesses, Gauge, and Pump Assembly Ref Description Part# Qty Control box Power cord 00-80C Pump lead 00-8 Knobs U-bracket 00-0E Crop eye plug Z Ref Description Part # Qty Gauge 00-08Z Gauge Holder Tee Fitting 00-TT Elbow Fitting 00-EL Straight Fitting 00-A 8 AGCO Balers Only 7 Non-AGCO Balers 8 7 Ref Description Part # Qty Pump 007-0S Elbow 00-EL8 Reducing Nipple 00-M8 Street Elbow 00-SE Filter Bowl 00- Nipple 00-M 7 Ball Valve 00-8 Elbow 00-EL Ref Description Part # Qty Pump 007-0S Elbow 00-EL8 Reducing Nipple 00-M8 Filter Bowl 00- Street Elbow 00-SE Nipple 00-M 7 Ball Valve 00-8 Elbow 00-EL NP Straight Fitting 00-A (L0/L0 Only, Replaces 00-EL) 9

Harvest Tec Model 8 8 9 7 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) 00-9007 Shield holder 00-8B Tip Kit Includes: Plug 00-F Plastic Box 008-9000 Tee

20 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) Shield holder 00-8B Tip Kit Includes: Plug 00-F Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Lynch pin Tip (Orange Set) 00-TT00VP Nozzle body Green cap (Green Set) 00-07A 7 Check valve 00-07V Tip (Green Set) 00-TT00VP 8 Hose clamp Blue cap (Blue Set) 00-07C 9 Straight Fitting 00-A Tip (Blue Set) 00-TT00VP 0 Hose Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 7 0 9 8 Ref # Description Part # Qty Description Part # Qty Spray shield 00-9A Tip Kit (Complete) 00-9007 Shield holder 00-9B Tip Kit Includes: Plug 00-F Plastic Box 008-9000 Tee

21 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-9A Tip Kit (Complete) Shield holder 00-9B Tip Kit Includes: Plug 00-F Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Straight Fitting 00-A Tip (Orange Set) 00-TT00VP Hose clamp Green cap (Green Set) 00-07A 7 Check valve 00-07V Tip (Green Set) 00-TT00VP 8 Lynch pin Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Hose Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 90 7 0 8 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00- Tip Kit (Complete) 00-9007 Shield holder 00-B Tip Kit Includes: Check valve 00-07V Plastic Box

22 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00- Tip Kit (Complete) Shield holder 00-B Tip Kit Includes: Check valve 00-07V Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose clamp Tip (Orange Set) 00-TT00VP Straight Fitting 00-A Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Lynch pin Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Backing plate 00-A Brown Cap (Brown Set) 00-07K Hose Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 8 0 7 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00- Tip Kit (Complete) 00-9007 Shield holder 00-B Tip Kit Includes: Lynch pin 008-7 Plastic Box 008-9000

23 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00- Tip Kit (Complete) Shield holder 00-B Tip Kit Includes: Lynch pin Plastic Box Check valve 00-07V Orange cap (Orange Set) 00-07J Tee 00-TT Tip (Orange Set) 00-TT00VP Hose clamp Green cap (Green Set) 00-07A 7 Straight Fitting 00-A Tip (Green Set) 00-TT00VP 8 Plug 00-F Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Backing plate 00-A Brown Cap (Brown Set) 00-07K Hose ft Tip (Brown Set) 00-TT00VP Ladder bracket H Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 7 8 9 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) 00-9007 Left shield hanger 00-DL Tip Kit Includes: Right shield hanger 00-DR

24 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) Left shield hanger 00-DL Tip Kit Includes: Right shield hanger 00-DR Plastic Box Spacer 00-S Orange cap (Orange Set) 00-07J Plug 00-F Tip (Orange Set) 00-TT00VP Tee 00-TT Green cap (Green Set) 00-07A 7 Hose clamp Tip (Green Set) 00-TT00VP 8 Hose Blue cap (Blue Set) 00-07C 9 Straight fitting 00-A Tip (Blue Set) 00-TT00VP 0 Check valve 00-07V Brown Cap (Brown Set) 00-07K Nozzle body Tip (Brown Set) 00-TT00VP Lynch pin Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 0 9 8 7 Ref # Description Part # Qty Description Part # Qty Spray shield 00-80 Tip Kit (Complete) 00-9007 Left shield hanger 00-DL Tip Kit Includes: Right shield hanger 00-DR

25 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield Tip Kit (Complete) Left shield hanger 00-DL Tip Kit Includes: Right shield hanger 00-DR Plastic Box Spacer 00-S Orange cap (Orange Set) 00-07J Plug 00-F Tip (Orange Set) 00-TT00VP Tee 00-TT Green cap (Green Set) 00-07A 7 Hose clamp Tip (Green Set) 00-TT00VP 8 Hose Blue cap (Blue Set) 00-07C 9 Straight fitting 00-A Tip (Blue Set) 00-TT00VP 0 Check valve 00-07V Brown Cap (Brown Set) 00-07K Nozzle body Tip (Brown Set) 00-TT00VP Lynch pin Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 & 8 8 7 0 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-B Tip Kit (Complete) 00-9007 Shield holder 00- Tip Kit Includes: Plug 00-F Plastic Box 008-9000 Tee

26 Harvest Tec Model 9 & Ref # Description Part # Qty Description Part # Qty Spray shield 00-B Tip Kit (Complete) Shield holder 00- Tip Kit Includes: Plug 00-F Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose clamp Tip (Orange Set) 00-TT00VP Straight Fitting 00-A Green cap (Green Set) 00-07A 7 Check valve 00-07V Tip (Green Set) 00-TT00VP 8 Hose Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Wind guard stop 00-D Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 97 & 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) 00-9007 Shield holder 00-E Tip Kit Includes: Plug 00-F Plastic Box 008-9000 Hose

27 Harvest Tec Model 97 & 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) Shield holder 00-E Tip Kit Includes: Plug 00-F Plastic Box Hose clamp Orange cap (Orange Set) 00-07J Hose Tip (Orange Set) 00-TT00VP Straight Fitting 00-A Green cap (Green Set) 00-07A 7 Tee 00-TT Tip (Green Set) 00-TT00VP 8 Check valve 00-07V Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 98 9 0 7 8 Ref # Description Part # Qty Description Part # Qty Spray shield 00-80 Tip Kit (Complete) 00-9007 Shield holder 00-80A Tip Kit Includes: Check valve 00-07V Plastic Box

28 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield Tip Kit (Complete) Shield holder 00-80A Tip Kit Includes: Check valve 00-07V Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose Tip (Orange Set) 00-TT00VP Hose clamp Green cap (Green Set) 00-07A 7 Straight Fitting 00-A Tip (Green Set) 00-TT00VP 8 Plug 00-F Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 99 9 7 8 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-9A Tip Kit (Complete) 00-9007 Shield holder 00-0 Tip Kit Includes: Plug 00-F Plastic Box 008-9000 Tee

29 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-9A Tip Kit (Complete) Shield holder 00-0 Tip Kit Includes: Plug 00-F Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose clamp Tip (Orange Set) 00-TT00VP Hose Green cap (Green Set) 00-07A 7 Straight Fitting 00-A Tip (Green Set) 00-TT00VP 8 Check valve 00-07V Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 00 7 8 9 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) 00-9007 Shield holder 00-CL Tip Kit Includes: Shield holder 00-CR Plastic Box

30 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) Shield holder 00-CL Tip Kit Includes: Shield holder 00-CR Plastic Box Check valve 00-07V Orange cap (Orange Set) 00-07J Tee 00-TT Tip (Orange Set) 00-TT00VP Straight Fitting 00-A Green cap (Green Set) 00-07A 7 Hose Tip (Green Set) 00-TT00VP 8 Hose clamp Blue cap (Blue Set) 00-07C 9 Plug 00-F Tip (Blue Set) 00-TT00VP 0 Nozzle body Brown Cap (Brown Set) 00-07K Lynch pin Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 0 0 7 8 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-CS Tip Kit (Complete) 00-9007 Shield holder 00-CL Tip Kit Includes: Shield holder 00-CR Plastic Box

31 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-CS Tip Kit (Complete) Shield holder 00-CL Tip Kit Includes: Shield holder 00-CR Plastic Box Check valve 00-07V Orange cap (Orange Set) 00-07J Tee 00-TT Tip (Orange Set) 00-TT00VP Hose clamp Green cap (Green Set) 00-07A 7 Hose Tip (Green Set) 00-TT00VP 8 Straight Fitting 00-A Blue cap (Blue Set) 00-07C 9 Plug 00-F Tip (Blue Set) 00-TT00VP 0 Nozzle body Brown Cap (Brown Set) 00-07K Lynch pin Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 09 7 8 9 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-80 Tip Kit (Complete) 00-9007 Shield holder 00-0A Tip Kit Includes: Plug 00-F Plastic Box 008-9000 Tee

32 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield Tip Kit (Complete) Shield holder 00-0A Tip Kit Includes: Plug 00-F Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose clamp Tip (Orange Set) 00-TT00VP Hose Green cap (Green Set) 00-07A 7 Straight Fitting 00-A Tip (Green Set) 00-TT00VP 8 Check valve 00-07V Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K NP U bolts 00-7UBS Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 0 7 8 9 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) 00-9007 Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box 008-9000

33 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-8A Tip Kit (Complete) Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box Straight fitting 00-A Orange cap (Orange Set) 00-07J Hose clamp Tip (Orange Set) 00-TT00VP Hose Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Shield holder 00-70A Blue cap (Blue Set) 00-07C 9 Lynch pin Tip (Blue Set) 00-TT00VP 0 Nozzle body Brown Cap (Brown Set) 00-07K Shield holder 00-70B Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 7 9 0 8 Ref # Description Part # Qty Description Part # Qty Spray shield 00-70C Tip Kit (Complete) 00-9007 Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box 008-9000 Hose

34 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-70C Tip Kit (Complete) Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box Hose clamp Orange cap (Orange Set) 00-07J Straight fitting 00-A Tip (Orange Set) 00-TT00VP Hose Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Shield holder 00-70A Blue cap (Blue Set) 00-07C 9 Lynch pin Tip (Blue Set) 00-TT00VP 0 Nozzle body Brown Cap (Brown Set) 00-07K Shield holder 00-70B Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 8 7 0 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-B Tip Kit (Complete) 00-9007 Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box 008-9000 Hose

35 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-B Tip Kit (Complete) Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box Hose clamp Orange cap (Orange Set) 00-07J Hose Tip (Orange Set) 00-TT00VP Straight fitting 00-A Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Shield holder 00-KA Blue cap (Blue Set) 00-07C 9 Shield mtg bkt 00-KB Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Nozzle body Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 7 9 8 0 Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) 00-9007 Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box 008-9000 Hose

36 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) Check valve 00-07V Tip Kit Includes: Tee 00-TT Plastic Box Hose Orange cap (Orange Set) 00-07J Straight fitting 00-A Tip (Orange Set) 00-TT00VP Plug 00-F Green cap (Green Set) 00-07A 7 Lynch pin Tip (Green Set) 00-TT00VP 8 Shield holder 00-K Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Hose clamp Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 8 0 7 8 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) 00-9007 Shield holder 00-H Tip Kit Includes: Check valve 00-07V Plastic Box

37 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) Shield holder 00-H Tip Kit Includes: Check valve 00-07V Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose Tip (Orange Set) 00-TT00VP Straight fitting 00-A Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Nozzle body Blue cap (Blue Set) 00-07C 9 Hose clamp Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 7 8 0 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-AS Tip Kit (Complete) 00-9007 Shield holder

Straight fitting 00-A Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Nozzle body 00-70 Blue cap (Blue Set) 00-07C 9 Hose

38 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-AS Tip Kit (Complete) Shield holder 00-J Tip Kit Includes: Check valve 00-07V Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose Tip (Orange Set) 00-TT00VP Straight fitting 00-A Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Nozzle body Blue cap (Blue Set) 00-07C 9 Hose clamp Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

39 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Shield holder 00-EK Tip Kit (Complete) Lynch pin Tip Kit Includes: Spray shield 00-ES Plastic Box Plug 00-F Orange cap (Orange Set) 00-07J Tee 00-TT Tip (Orange Set) 00-TT00VP Hose Green cap (Green Set) 00-07A 7 Check valve 00-07V Tip (Green Set) 00-TT00VP 8 Hose clamp Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Straight fitting 00-A Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

40 Harvest Tec Model J Ref # Description Part # Qty Description Part # Qty Shield holder 00-EJ Tip Kit (Complete) Lynch pin Tip Kit Includes: Spray shield 00-ES Plastic Box Hex Plug 00-F Orange cap (Orange Set) 00-07J Tee 00-TT Tip (Orange Set) 00-TT00VP Hose ft Green cap (Green Set) 00-07A 7 Check valve 00-07V Tip (Green Set) 00-TT00VP 8 Hose clamp Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Straight fitting 00-A Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 7 0 7 8 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) 00-9007 Shield holder 00-HPC Tip Kit Includes: Check valve 00-07V Plastic Box

41 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-ES Tip Kit (Complete) Shield holder 00-HPC Tip Kit Includes: Check valve 00-07V Plastic Box Tee 00-TT Orange cap (Orange Set) 00-07J Hose Tip (Orange Set) 00-TT00VP Straight fitting 00-A Green cap (Green Set) 00-07A 7 Plug 00-F Tip (Green Set) 00-TT00VP 8 Nozzle body Blue cap (Blue Set) 00-07C 9 Hose clamp Tip (Blue Set) 00-TT00VP 0 Lynch pin Brown Cap (Brown Set) 00-07K Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 0 7 0 8 9 Ref # Description Part # Qty Description Part # Qty Spray shield 00-AS Tip Kit (Complete) 00-9007 Shield holder 00-XA Tip Kit Includes: Mounting brackets 00-XB Plastic Box

42 Harvest Tec Model Ref # Description Part # Qty Description Part # Qty Spray shield 00-AS Tip Kit (Complete) Shield holder 00-XA Tip Kit Includes: Mounting brackets 00-XB Plastic Box Check valve 00-07V Orange cap (Orange Set) 00-07J Tee 00-TT Tip (Orange Set) 00-TT00VP Hose Green cap (Green Set) 00-07A 7 Straight fitting 00-A Tip (Green Set) 00-TT00VP 8 Plug 00-F Blue cap (Blue Set) 00-07C 9 Nozzle body Tip (Blue Set) 00-TT00VP 0 Hose clamp Brown Cap (Brown Set) 00-07K Lynch pin Tip (Brown Set) 00-TT00VP Washer 00-07W 8 Tip Strainer

Harvest Tec Model 9 8 9 0-7 Ref Description Part # Qty Ref Description Part # Qty Shield Holders 00-KX Tip Kit (Complete) 00-9007 Spray Shield 00-AS Tip Kit Includes: Check Valve 00-07V Orange cap

43 Harvest Tec Model Ref Description Part # Qty Ref Description Part # Qty Shield Holders 00-KX Tip Kit (Complete) Spray Shield 00-AS Tip Kit Includes: Check Valve 00-07V Orange cap (Orange Set) 00-07J Lynch Pins Green cap (Green Set) 00-07A Straight Fitting 00-A Blue cap (Blue Set) 00-07C Nozzle Body Brown Cap (Brown Set) 00-07K 7 Hose Clamp Tip (Orange Set) 00-TT00VP 8 Hex Plug 00-F Tip (Green Set) 00-TT00VP 9 Tee Fitting 00-TT Tip (Blue Set) 00-TT00VP 0 /" Hose ft Tip (Brown Set) 00-TT00VP Tip Strainer Washer 00-07W 8 NP Plastic Box

Harvest Tec Model 0 7-0 9 8 Ref Description Part # Qty Ref Description Part # Qty Shield Holder 00-KC 0 Plano Box 008-900 Spray Shield 00-NSX Strainer 00-0-00 Hex Plug 00-F Tip (Pink) 00-T800-PT

44 Harvest Tec Model Ref Description Part # Qty Ref Description Part # Qty Shield Holder 00-KC 0 Plano Box Spray Shield 00-NSX Strainer Hex Plug 00-F Tip (Pink) 00-T800-PT Manifold Block 00-NSB Tip (Red) 00-T800-PT Straight Fitting 00-A Tip (Yellow) 00-T800-PT Hose Clamp Tip (Brown) 00-T800-PT 7 Hose ft Lynch Pin Straight Fitting 00-AF Hardware 9 Check Valve 00-07V

45 Harvest Tec Model Ref Description Part # Qty Ref Description Part # Qty Shield Holder 00-KC 0 Plano Box Spray Shield 00-NSX Strainer Hex Plug 00-F Tip (Pink) 00-T800-PT Manifold Block 00-NSB Tip (Red) 00-T800-PT Straight Fitting 00-A Tip (Yellow) 00-T800-PT Hose Clamp Tip (Brown) 00-T800-PT 7 Hose ft Lynch Pin Straight Fitting 00-AF Hardware 9 Check Valve 00-07V

Harvest Tec Model 7 0-9 8 Ref Description Part # Qty Ref Description Part # Qty Shield Holder 00-NAX 0 Plano Box 008-900 Spray Shield 00-NSB Strainer 00-0-00 Hex Plug 00-F Tip (Pink) 00-T800-PT

46 Harvest Tec Model Ref Description Part # Qty Ref Description Part # Qty Shield Holder 00-NAX 0 Plano Box Spray Shield 00-NSB Strainer Hex Plug 00-F Tip (Pink) 00-T800-PT Manifold Block 00-NSB Tip (Red) 00-T800-PT Straight Fitting 00-A Tip (Yellow) 00-T800-PT Hose Clamp Tip (Brown) 00-T800-PT 7 Hose ft Lynch Pin Straight Fitting 00-AF Hardware 9 Check Valve 00-07V

47 Warranty and Liability Agreement Harvest Tec, Inc. will repair or replace components that are found to be defective within months from the date of manufacture. Under no circumstances does this warranty cover any components which in the opinion of Harvest Tec, Inc. have been subjected to negligent use, misuse, alteration, accident, or if repairs have been made with parts other than those manufactured and obtainable from Harvest Tec, Inc. Our obligation under this warranty is limited to repairing or replacing free of charge to the original purchaser any part that in our judgment shows evidence of defective or improper workmanship, provided the part is returned to Harvest Tec, Inc. within 0 days of the failure. Parts must be returned through the selling dealer and distributor, transportation charges prepaid. This warranty shall not be interpreted to render Harvest Tec, Inc. liable for injury or damages of any kind, direct, consequential, or contingent, to persons or property. Furthermore, this warranty does not extend to loss of crop, losses caused by delays or any expense prospective profits or for any other reason. Harvest Tec, Inc. shall not be liable for any recovery greater in amount than the cost or repair of defects in workmanship. There are no warranties, either expressed or implied, of merchantability or fitness for particular purpose intended or fitness for any other reason. This warranty cannot guarantee that existing conditions beyond the control of Harvest Tec, Inc. will not affect our ability to obtain materials or manufacture necessary replacement parts. Harvest Tec, Inc. reserves the right to make design changes, improve design, or change specifications, at any time without any contingent obligation to purchasers of machines and parts previously sold. Note: The warranty registration card supplied with the installation manual must be filled out and returned to the manufacturer within fifteen days of purchase. Without record of receipt of warranty registration at the manufacturer, the warranty is not valid. Revised 0/0/0 7

48 HARVEST TEC, INC. P.O. BOX 8 HARVEY STREET HUDSON, WI 0 PHONE: FAX:

Model 440, 441, 442 & 448

Model 440, 441, 442 & 448 Operation Manual Model 440, 44, 44 & 448 & gallon Preservative Applicator 440-44-44-448-OPR /6 (intentionally blank) Harvest Tec 440, 44, 44 & 448 OPERATION Table of Contents Page Model Reference Introduction