Pumps. Udor Pumps. Poly Pumps

Transcription

1 TransSpray Equipment - Pumps Udor Pumps Ideal for Liquid Fertilisers CODE Flow Rate No. Diaphrams Shaft Size Max. Pressure PSI/Bar) Weight Bare Pump & Shaft RRP APZ0700S 70L/min 3 1 3/8 290/20 11 kg $1106 Poly Pumps Ideal for Liquid Fertilisers features Centrifugal poly pump with nylon impeller 495 L/min Max Flow (131GPM) 26 metre Total Head (85 ) 8 metres Max Suction Head (26 ) Poly Pump with No Motor $443* CODE: APC4950 Poly Pump Coupled with GX200 Honda Motor $1405* Bertolini Pressure Regulator Easy to Use, Three Way Pressure Regulators 90 L/min flow rate Choose from 15 bar (218psi) and 40 bar (580psi) pressure ratings 3 outlets with 10mm hose tails and ball valves Reinforced body for strength and chemical resistance Complete with pressure gauge and mounting bracket Positive on/off lever action control Accurate and progressive pressure selection Reliable pressure control Smooth action pressure selection 3-way fluid control CODE: APF4950Z Sting 3 Way Regulator $422* 90 L/min, 15 bar (218psi) CODE: ATRB15B09013M3K OUTSTANDING QUALITY, USER FRIENDLY More Pumps Sting 3 Way Regulator $441* 90 L/min, 40 bar (580psi) CODE: ATRB40B09013M3K Measuring Jugs and Buckets Accurately Measure & Pour your Chemical with these easy-pour Jugs Freatures Strong, rigid design Open handle for gloved hand Wide, non-drip spout Calibration in Litres/millilitres Excellent chemical resistance Specially raised and inked graduations - more accurate and easier to read Corrosion resistant UV stabilised for long outdoor use Virtually unbreakable Finger grip on bottom to assist pouring Chemical resistant Boomless Nozzles With Extra-wide Flat Spray Projection Type 5880 BoomJet nozzle is used for spraying areas not easily accessed with a boom sprayer. It combines two off-centre tips and three VeeJet* nozzles to produce an overall wide swath flat spray. The nozzle assembly provides good distribution considering the wide pattern coverage obtained; however, the uniformity is not as good as with a properly operated boom sprayer.* Supplied with one additional 1/4 NPT pipe plug and one blank tip for setting BoomJet to one side only. Also has a 1/4 NPT pressure guage port. *Uniformity can be optimised by double overlapping spray swaths on successive sprayer passes. Remember, this also doubles the application volume. ABJ006 ABJ010 ABJ020 ABJ040 Notes: Always double check your application rates. Tabulations are based on spraying water at 70 o F (21 o C). TransSpray Equipment - Jugs and Buckets 250ml Jug $18.50* 250 ml CODE: ATJ L Jug $30.00* 3 LITRE CODE: ATJ L Jug $76.50* 20 LITRE CODE: ATJ20000 W= Maximum effective coverage with nozzle mounted at 1m height 3/4 NPT Female Back Inlet Connection $481* Weight: Brass 0.91Kg 1L Jug $23.50* 1 LITRE CODE: ATJ L Jug $37.50* 5 LITRE CODE: ATJ L Jug $85* 25 LITRE CODE: ATJ25000 FAST COVERAGE OF SPRAY AREAS TTi - Product Catalogue TTI - Spray Equipment 41

2 TransSpray Equipment - Accessories and Spare Parts TransSpray Equipment - Accessories and Spares Parts Filters keep your spray clear & clean! reduce nozzle blockage & protect your pump Lighter designed to fit directly onto 1/2 male port of Shurflo pumps 12mm inlet hose tail, 80 mesh screen filter $48* SUCTION FILTER CODE: ATPFS050Q10 (FOR 7800 PUMPS) CODE: ATPFS050Q12 (FOR 5900 PUMPS) Make Your Spraying Jobs Easier & Improve Your Boom Spray Control Choose From 1-way or 3-way Solenoid Kits Heavy duty brass 1/2 BSP, 12VDC solenoid valves Suitable for most chemicals Viton diaphragm Rated to 140PSI Image used for illustrative purposes only. Fire Hose & Adjustable Nozzle 19mm Fire Hose available in 36m rolls with fire fighting nozzle AS 1221 compliant Extra coverage with 36m hose $48* ½ THREADED SUCTION FILTER TO SUIT SHURFLO PUMPS CODE: ATPFS080T12 $164* 1 WAY SOLENOID VALVE KIT 10 BAR (140PSI) 3.6M ELECTRICAL LEADS 1/2 BSP PORT SOLENOID CODE: ATVS10B036 Highly Flexible Spray Hose GREAT VALUE KINK RESISTANT HOSE High quality TTi agricultural spray hose High flexibility, kink resistant Working pressure 40 bar (580 psi) Burst Pressure 150 bar (2200 psi) Suction hose available also - call for details Black ribbed outer cover with a specially formulated yellow chemical resistant tube 10mm & 12mm hose available in 100m rolls Call for your price $185* CODE: CUF14519MMX36N SAFE TO USE! UP TO 40BAR Shut off piston allows for ease of cleaning filter cartridge 32 mesh screen filter $141* 1 1/4 SUCTION FILTER 25mm HOSETAILS CODE: ATPFSV032T32T $165* 1 1/2 SUCTION FILTER 32mm HOSETAILS CODE: ATPFSV032T38T $500* 3 WAY SOLENOID VALVE KIT 10 BAR (140PSI) WITH 3 WAY SWITCH BOX AND CABLES 1/2 BSP PORT SOLENOID CODE: ATVS10BX3W CODE 300 PSI Pressure Rating RRP* CUY30010MMX10 CUY30012MMX10 10m length of 10mm spray hose (working pressure 24 bar 300 psi) 10m length of 12mm spray hose (working pressure 24 bar 300 psi) Coiling Hose 700mm coiled lengthstretches to 4.5 m Suitable for use with any 12 volt sprayer 10mm ID polyurethane hose Complete with nut & tail fittings to suit the lance $39.50* COILING HOSE CODE: ATPH045M10T $42.50 $48.00 CODE 580 PSI Pressure Rating RRP* CUY58010MMX10 CUY58012MMX10 10m length of 10mm spray hose (working pressure 40 bar 580 psi) 10m length of 12mm spray hose (working pressure 40 bar 580 psi) $69.00 $94.50 S38 S Home Garden Spray Guns Economy Lance Lightweight chromed aluminium Adjustable spray nozzle Filter in handle 10mm hose barb connection 850mm overall length Versatile Lance Lightweight all purpose lance Virtually unbreakable shaft Adjustable spray nozzle Overall length: 760mm Maximum pressure: 10 bar Choose from large range of compatible accessories 10mm hosetail Telescopic Lance Lightweight lance with long reach for trees and bushes Very easily adjusted Maximum pressure: 10 bar (145 psi) Overall length: from 710 to 1150mm Compatible with Inter accessories as shown 10mm hosetail Add any of these to your versatile or telescopic lances spray hoods herbicide nozzles flexible double nozzle Hit your target every time without collateral damage, with the Inter Elite Spray Hoods. $33* CONICAL HOOD CODE: ATA00C Spray Booms $42.50* RECTANGULAR HOOD CODE: ATA00B Consistent application rates for band spraying $39.50* ELBOW WITH LOW VOLUME CODE: ATA00G Three boom types to choose from to speed up your ground coverage. Lightweight for ease of use. $94.50* QUADRUPLE NOZZLE C/W CONE SPRAY NOZZLES 1.5M CODE: ATA00EC $38.50* ECONOMY LANCE WITH 10MM HOSE BARB LENGTH: 850MM CODE: AHL009 $55.50* VERSATILE LANCE WITH 10MM HOSE TAIL LENGTH: 760MM CODE: AHL002 $86.00* TELESCOPIC LANCE WITH 10MM HOSE TAIL LENGTH: 760MM CODE: AHL003T $22.50* ELBOW FOR FAN CODE: ATA00F $11.00* NOZZLE REPLACEMENT CODE: CPLP009N $12.00* NOZZLE REPLACEMENT CODE: CGP726 $12.00* NOZZLE REPLACEMENT CODE: CGP726 Tubes can be manually moulded for specialised spraying requirements. Two models available, one with adjustable cone nozzles and one with fan nozzles. Used for basal bark spraying and ant block treatments. $53* FLEXIBLE DOUBLE NOZZLE ADJUSTABLE CONE SPRAY NOZZLES CODE: ATA00HC $108* QUADRUPLE NOZZLE C/W FAN SPRAY NOZZLES 1.5M CODE: ATA00EF $64* FLEXIBLE DOUBLE NOZZLE ADJUSTABLE FAN SPRAY NOZZLES CODE: ATA00HF $68* EXTENDIBLE DOUBLE NOZZLE CODE: ATA00RF TTi - Product Catalogue TTI - Spray Equipment 43

3 TransSpray Equipment - Accessories and Spare Parts RAPIDJET Spray Gun Ergonomic spray gun with long reach Easily adjustable brass nozzle for a variety of spray patterns Maximum pressure: 17 bar (250 psi) Max. flow rate: 26 L/min Overall length: 740mm 10mm hose barb TURBO Spray Gun Great value multipurpose spray gun One hand operation for easy pattern adjustment + on/off trigger Adjustable turbo atomiser Supplied with 10mm hose tail Max pressure 360psi Overall length 445mm TURBO 400 Spray Gun Professional multipurpose spray gun with Viton seals One hand operation for easy pattern adjustment and on/off trigger Adjustable turbo atomiser Comes with swivel & 10mm hose tail Max pressure: 50 bar (725psi) Overall length: 400mm Multipurpose Spray Gun Repair kit available 10mm hose barb PROTECTED TRIGGER Professional multipurpose high pressure spray gun with Viton seals Adjustable turbo atomiser for full range of spray requirements from straight stream to soft atomised cone spray position Metal handle & trigger guard favoured by many operators Swivel & 10mm hose tail supplied Max pressure: 50 bar (725psi) Overall length: 400mm Trigger lock Spray WELL BALANCED FOR EASE OF USE $94.50* CODE: AHG112T $105* CODE: AHG101T $188* CODE: AHG102ST $206* CODE: AHG103ST Guns Repair kit Code: CPLK102R 2.3mm Ceramic nozzle Code: CPLP102N23 3.5mm Ceramic nozzle Code: CPLP102N35 Repair kit Code: CPLK102R 2.3mm Ceramic nozzle Code: CPLP102N23 3.5mm Ceramic nozzle Code: CPLP102N35 HIGH PERFORMANCE, MULTIPURPOSE TURBO GUNS Repair kit Code: CPLK102R turbo spray guns come with 10mm hose tail Heavy Duty Pistol Grip Spray Gun All metal construction stainless steel, aluminium & brass High pressure, long range spray gun Teflon seal Overall Length: 180mm Easily adjustable spray pattern Max. pressure: 55 bar (800psi) Max. flow: 15 L/min (580psi) with 3mm nozzle Spot 300 Lance Heavy Duty Spot Spray Gun Trigger adjustable spray pattern with lock Max pressure: 40 bar (580psi) Overall length: 300mm Top Gun High pressure, long range, multipurpose spray gun Front handgrip allows quick spray pattern selection Fitted with trigger lock and 1/2 swivel inlet Overall length: 700mm Max range: 50bar Max pressure: 60 bar (870psi) Max flow rate: 135 L/min Powerjet Spray Guns TransSpray Equipment - Accessories and Spares Parts Repair kit - CPLK104R Nut & washer for nozzle - CPLP104N 1.5mm nozzle - CPLP104N15 2.0mm nozzle - CPLP104N20 2.5mm nozzle - CPLP104N25 3.0mm nozzle - CPLP104N30 3.5mm nozzle - CPLP104N35 4.0mm nozzle - CPLP104N40 Repair kit - CPLK107R 2.3mm nozzle - CPLP107N23 Simple & effective operating system Using stainless steel ball & seat & brass housing Standard on Professional Sprayers Durable, dependable spray gun for all spraying applications Adjustable spray nozzle Overall length: 700mm Maximum pressure: 20Bar 300psi Long Lance With 620mm extension Overall length: 840mm Powerjet Spray Gun Overall length: 475mm Fitted with hose swivel Repair kit - CPLK105R Nut & washer for nozzle - CPLP105N 1.5mm nozzle - CPLP105N15 2.3mm nozzle - CPLP105N23 Standard on Professional Sprayers CODE: AHG110ST $149* Long Lance CODE: AHG111ST $163* Powerjet Spray Gun CODE: AHG109ST $141* $202* CODE: AHG104ST $210* CODE: AHG105ST $310* CODE: AHG107ST CPLP108N High quality brass adjustable nozzle $21.50* TURBO SPRAY GUNS comes with 10mm Hose Tail FREE! Keep Your Prize Plants Safe! Add a Spray Hood for Target Spraying Rectangular Spray Shield Kit to suit Powerjet Spray Gun Protect surrounding vegetation Shield (pictured) fitted to lances Standard on Professional Sprayers CODE: ATPS001 $70* 110mm (H) Front 350mm (W) Side 120mm (D) TTi - Product Catalogue TTI - Spray Equipment 45

4 TransSpray Equipment - Reels Keep your hose neat, tidy & Protected with the TTi REEL! New stronger frame design Reel constructed from rust-free UV stabilised poly Improved fluid path for greater flow rates All brass components no rusty water! Optimised full flow ball bearing swivel easier rewinding under pressure New positive reel locking device works in four positions to prevent hose unwinding in transit Rotating handle for rewinding 30m BARE REEL $376* 30M BARE HOSE REEL CODE: ATHW03B10 30m REEL & HOSE $580* 30 METRE HOSE REEL CODE: ATHW03B030M10G 50m BARE REEL $415* 50M BARE HOSE REEL CODE: ATHW05B10 DURABLE OPTIMISED SWIVEL WITH BALL BEARING FOR EASIER REWINDING WHEN PRESSURISED Reels FREE!!! POWERJET SPRAY GUN WITH EVERY REEL & HOSE ORDERED 30m BARE REEL $376* 30M BARE HOSE REEL SIDE MOUNT CODE: ATHW03X10 30m REEL & HOSE $580* 30 METRE HOSE REEL SIDE MOUNT CODE: ATHW03X030M10G 50m BARE REEL $415* 50M BARE HOSE REEL SIDE MOUNT CODE: ATHW05X10 LESS Nozzle Kits Features 4 sizes to choose from Use with ATV, 3PL or ute sprayers Can be used as 180 swath or 90 swath by swapping nozzle plates Ideal for rough country spraying & locust control Optimum mounting height between 0.5m & 1.0m above ground Includes LESS WEIGHT LESS SPACE NO ARMS! Brass boomless nozzle Steel mounting bracket On/Off tap with 1/2 Male BSP fitting Can be easily changed from one side to two side spraying TransSpray Equipment - Nozzle Kits Spread your Spray Further for Firebreaks, rough country spraying & locust control 7m Max Boomless Nozzle Kit #2 Nozzle $161* UP TO 37 LITRES/HECTARE MINIMUM PUMP CAPACITY 7 L/MIN CODE: ABK02 15m Max Boomless Nozzle Kit #5 Nozzle $170* UP TO 74 LITRES/HECTARE MINIMUM PUMP CAPACITY 11 L/MIN CODE: ABK05 16m Max Boomless Nozzle Kit #10 Nozzle $209* UP TO 147 LITRES/HECTARE MINIMUM PUMP CAPACITY 20 L/MIN CODE: ABK10 17m Max 50m REEL & HOSE $753* 50 METRE HOSE REEL CODE: ATHW05B050M10G 100m BARE REEL $502* 100 METRE BARE HOSE REEL FOR 10MM HOSE CODE: ATHW10B10 50m REEL & HOSE $753* 50 METRE HOSE REEL SIDE MOUNT CODE: ATHW05X050M10G 100m BARE REEL $1115* 100 METRE HOSE REEL CODE: ATHW10B100M10G UPTO 17m COVERAGE Economy Boom Quick Release 4-Nozzle Spray Boom 4 nozzle boom Sprays 2 metres wide Versatile, lightweight and cost effective Fibre reinforced material for strength Height adjustable Suitable for use with economy sprayers Boomless Nozzle Kit #20 Nozzle $228* UP TO 190 LITRES/HECTARE MINIMUM PUMP CAPACITY 30 L/MIN CODE: ABK20 Economy Quick Release Boom $242* GREAT VALUE SMALL AREA SPRAY QUICK RELEASE 4 NOZZLE SPRAY SPRAYS 2M WITH H FRAME CODE: ABVD TTi - Product Catalogue TTI - Spray Equipment 47

5 TransSpray Equipment - Booms TransSpray Equipment - Booms VersatileBoom SPRAY FIREBREAKS OR FENCE LINES WITH THIS INCREDIBLY VERSATILE Comes with boom mounting brackets with u-bolt clamps for attaching to vehicle/trailer Features 1.2 metre compact boom Sprays 4 metre swath width Compatible with any spot sprayer with pump L/min or more Taps for 7 way nozzle control Versatility of spraying options Non-drip ball check filters Versatile Boom $524* SPRAYS UP TO 4 METRES CODE: ABVL040 COMPLETE Booms 7 WAY SPRAY SELECTION T-piece for fitting to pressure hose SPRAYS UP TO 4 METRES Ball valve tap for Boom on/off control Glide Teejet compatible Quick connect nozzle caps Non drip nozzle bodies WITH BUILT-IN NOZZLE CARE PROTECTION Spring loaded positive action breakaway EASY TO ATTACH END JETS FOR EXTRA SPRAY WIDTH BoomGlide WE HELP YOU COVER GROUND QUICKER WITH OUR FANTASTIC RANGE OF TARGET S Fully plumbed 6m Steel Boom Complete Built in nozzle protection $1405* CODE: ABM060 6 & 8 metre booms hot-dip galvanised steel construction Boom mounting brackets with U bolt clamps for attaching to vehicle/trailer 110 Low Drift nozzles x3 On/off ball valve tap for 3 centre nozzles On/off ball valve tap for OC end jet nozzles Brass offcentre end jets (OC4) on gswivel body Nozzle Care System Nozzles mounted behind boom frame for protection from accidental damage 8m Steel Boom Complete $1737* CODE: ABM080 Equipped with air induction nozzles to further increase spraying accuracy JETS LEFT, RIGHT & CENTER 4.0 METRES JETS CENTER ONLY Deluxe Boom Galvanised steel construction Air induction spray tips Spring loaded positive action breakaway Increased spraying accuracy JETS LEFT JETS RIGHT JETS LEFT & CENTER JETS RIGHT & CENTER JETS LEFT & RIGHT Deluxe Versatile Boom $992* GREAT VALUE SMALL AREA SPRAYS UP TO 4 METRES CODE: ABM040 SPRAY Teejet compatible Quick connect nozzle caps Optional self levelling kit - available with 10 & 12 metre booms Spring loaded breakaways Strong steel construction. 10 metre & 12 metre powdercoated for durability Fitted with 110 o Low Drift nozzles - standard. Other types available CODE DESCRIPTION RRP* Non-drip nozzle bodies ABM100P 10M STEEL COMPLETE $2678 ABM100PS 10M STEEL COMPLETE WITH SELF LEVELLING KIT $3779 ABM120P 12M STEEL COMPLETE $2848 ABM120PS 12M STEEL COMPLETE WITH SELF LEVELLING KIT $ TTi - Product Catalogue TTI - Spray Equipment 49

6 TransSpray Equipment - Poly Booms the One-and-Only Poly Boom! unique poly boom with built-in toughness means extraordinary durability & rough country spraying capability Detail of nozzle guards Nozzles recessed in poly boom section for protection BUILT TO TAKE THE KNOCKS COMPLETE Poly Booms Boom Nozzle Bodies SOLD IN 4 PACKS TransSpray Equipment - Parts and Accessories Polypropylene construction complete with quick couple cap and gasket EPDM diaphragm check valve opens at 0.5bar Max working pressure 20bar 10mm (3/8 ) hose barbs - single, two or three Heavy duty UV stabilised poly construction for rust free durability Strong hot-dip galvanised centre section 4m Poly Boom $950* as seen in the picture CODE: ABP040 Spring loaded positive action breakaways Non-drip nozzle bodies fitted with 110 o Low Drift nozzles Dry Boom Nozzles (Pack of 4) CODE: ATPNDVQT10CX4 SOLD IN 4 PACKS CODE: ATPNDVQT10C CODE: ATPNDVQE10C CODE DESCRIPTION RRP* ATPNHVQ12CGBX4 ATPNCVQ12CGBX4 ATPNDVQT10CX4 ATPNDVQE10CX4 ATPNDVQX10CX4 Hinged non-drip nozzle body seal, screw & cap-suit ½ pipe. Pk of 4 clamp type nozzle holder with diaphragm check valve, quick couple cap, gasket & bolts, to suit 1/2 pipe - Pk of 4 Tee Non-drip Dry boom nozzle holder with cap 3/8 hose barbs. Pk of 4 Elbow Non-drip Dry boom nozzle holder with cap 3/8 hose barbs. Pk of 4 Cross Non-drip Dry boom nozzle holder 3/8 hose barbs. Pk of 4 Teejet compatible quick connect nozzle caps Features Fitted with 110 o Low Drift nozzles - standard. Other types available Tough polyethylene provides excellent impact resistance Nozzle guards provide excellent protection Heavy duty construction for durability UV stabilised for long outdoor life Non-drip nozzle holders with 110 nozzles Positive action breakaway Lightweight for easier handling Proven corrosion and chemical resistance Adjustable mounting brackets $1702* 6m Poly Boom 12 Nozzle CODE: ABP060 Nozzle care system All poly guard incorporated into boom to protect nozzles from snagging, damage etc. Nozzle guard for 6 and 8m poly booms Non drip holders with 110 Low Drift nozzles COMPLETE POLY PACKAGE Spring loaded breakaways Non-drip nozzle bodies $91.50* OFF CENTRE END JET WITH TAP CODE: ATPNSV10OC Heavy duty UV stabilised poly construction for rust free durability Off-centre nozzle Off-centre nozzles can be fitted to allow for fenceline and channel spraying. Increases spray swath by 1 metre each side. Fitted with ball valve for easy manual control. COMPLETE PACKAGE Wet Boom Nozzles (Pack of 4) CODE: ATPNC12CGBX4 Accessories 1/2 BSP NUT 12mm hose barbs CODE $32* PACK OF 2 CODE: ATPXM1212SX2 DESCRIPTION ( Female / Female) RRP* CFVBB025F025F 25mm Lever Ball Valve $47.00 CFVBB032F032F 32mm Lever Ball Valve $56.50 CFVBB040F040F 40mm Lever Ball Valve $89.50 CFVBB050F050F 50mm Lever Ball Valve $ CFVBB080F080F 80mm Lever Ball Valve $ CFVBB100F100F 100mm Lever Ball Valve $ CODE: ATPNHVQ12CGB $30* PACK OF 2 1/2 BSP NUT 10mm hose barbs CODE: ATPXM1210SX2 CODE: ATPNCVQ12CGB CODE DESCRIPTION (camlocks) RRP* ATPXP040K ATPXP050K Designed for clamping around 1/2 spray tubes 7mm inlet size. Polypropylene construction complete with quick couple cap, gasket, seal and screws EPDM diaphragm check valve opens at 0.5bar Poly Quick Release Coupling $90* PROVIDES INSTANT LIQUID CUT-OFF WHEN SPRAY GUN IS DETACHED FROM HOSE 10mm HOSE TAILS MAX PRESSURE: 1450 kpa (210psi) LOCK RING TO PREVENT ACCIDENTAL DETACHMENT CODE: ATPXP10QS Hose Swivels Lever Ball Valves Camlocks Linkage Pins 1.5 Camlock Kit (1 x PP40C, 1 x PP40A, 1 x PP40DC) 2 Camlock Kit (1 x PP50C, 1 x PP50A, 1 x PP50DC) $69.00 $92.50 Swivel Connectors $39* WITH BALL BEARINGS TWIN SEALS FOR EASIER WINDING UNDER PRESSURE MAX PRESSURE: 50 BAR (725psi) 1/2 MALE TO 1/2 FEMALE THREADS NO MORE TANGLES HOSES! CODE: CFSPB12F12M CODE DESCRIPTION (hose swivels) RRP* CFSBB12M12F 1/2 MBSP to 1/2 FBSP swivel fitting with gaskets - Suits to Heavy Duty Pistol Grip spray $31.00 gun CFSBB12M10M 1/2 MBSP to 3/8 MNPT swivel - Suits Power Jet spray gun $34.00 CFSBB20M20F 3/4 MBSP to 3/4 FBSP swivel with gaskets. CFSFB20F12M 3/4 female to 1/2 male swivel, max pressure 360psi $81.00 CHPL1C20 Category 1 pin $18.50 CHPL2C29 Category 2 pin $33.00 CHPL1C252C Category 1 & 2 Implement pin $ TTi - Product Catalogue TTI - Spray Equipment 51

7 TransSpray Equipment - Parts and Accessories TransSpray Equipment - Parts and Accessories Teejet Visiflo Flat Spray Tips Spread your Spray Further For Less Effort! ideal for Firebreaks, rough country spraying & locust control CODE DESCRIPTION COLOUR RRP* CNSSF110010X10 Nozzle 110 SF.01 PACK 10 Orange $35 CNSSF110015X10 Nozzle 110 SF.015 PACK 10 Green $35 CNSSF110020X10 Nozzle 110 SF.02 PACK 10 Yellow $35 CNSSF110030X10 Nozzle 110 SF.03 PACK 10 Blue $35 CNSSF110040X10 Nozzle 110 SF.04 PACK 10 Red $35 Remove X10 in the CODE Individual Nozzle $4.70 each Tapered edge flat spray pattern for uniform coverage in broadcast spraying. VisiFlo colour coded version available in stainless steel, ceramic and polymer in 80 or 110 spray angles in selected sizes. Available in ceramic 80 capacities and 110 capacities Standard version (not colour coded) available in 15, 25, 40, 50 and 65 spray angles in brass, stainless steel or hardened stainless steel. Air Induction XR XR Flat Spray Tips 110 wide, tapered flat spray angle with air induction technology offers better drift management. Made of a two piece UHMWPE polymer construction with VisiFlo colour-coding. UHMPE provides excellent chemical resistance, including acids, exceptional wear life. Depending on the chemical, produces large air-filled drops through a Venturi air aspirator. Available in seven tip capacities with a wide operating pressure range: PSI (1 6 bar). Compact size to prevent tip damage. Removable pre-orifice. CODE DESCRIPTION COLOUR RRP* CNSAIXR110015X10 Air induction XR Flat Spray tips - PACK 10 Green $134 CNSAIXR110020X10 Air induction XR Flat Spray tips - PACK 10 Yellow $134 CNSAIXR110025X10 Air induction XR Flat Spray tips - PACK 10 Purple $134 CNSAIXR110030X10 Air induction XR Flat Spray tips - PACK 10 Blue $134 CNSAIXR110040X10 Air induction XR Flat Spray tips - PACK 10 Red $134 CNSAIXR110050X10 Air induction XR Flat Spray tips - PACK 10 Brown $134 CNSAIXR110060X10 Air induction XR Flat Spray tips - PACK 10 Grey $134 Remove X10 in the CODE Individual Nozzle $13.80 each TTi - Product Catalogue TTI - Spray Equipment 53

8 TransSpray Equipment - Parts and Accessories Wide Angle Flat Spray Tips CODE DESCRIPTION COLOUR RRP* CNSTT110010X10 Turbo Teejet Angle Flat Spray tips - PACK 10 $128 CNSTT110015X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Orange $128 CNSTT110020X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Yellow $128 CNSTT110025X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Purple $128 CNSTT110030X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Blue $128 CNSTT110040X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Red $128 CNSTT110050X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Brown $128 CNSTT110060X10 Turbo Teejet Angle Flat Spray tips - PACK 10 Grey $128 CNSTT110080X10 Turbo Teejet Angle Flat Spray tips - PACK 10 White $128 Remove X10 $14.10 Individual Nozzle in the CODE each Applications Herbicides, fungicides and insecticides Features Herbicides, fungicides and insecticides Tapered edge wide angle flat spray pattern for uniform coverage in broadcast spraying Large, rounded internal passage to minimize clogging. Excellent resistance to corrosive solutions Superior wear characteristics. Larger droplets for less drift PSI (1 6 bar) Freight Details TTi is committed to supplying Freight Free to your local dealer in as many areas as possible. In order to achieve this there may be some delays in delivery. At times fuel prices increase due to Government policy or external influences and this directly affects cost of freight. It may be necessary to charge a fuel levy in such instances. All States Orders less than $200RRP value will incur a $22 incl GST Freight/Handling charge Urgent deliveries may incur a freight charge. Please contact us to discuss. Overnight airbag service is available for small parts under 3kg at $27.50 incl GST per bag. All Large trailers (500L 15000L) priced ex Nathalia, VIC All Flood-Rite Water Carts priced ex Nathalia, VIC Victoria All products (except larger trailers): FREIGHT FREE to your store. Remote areas excluded South Australia FREIGHT FREE to Adelaide Metro on all products up to 2000L (except large trailers) FREIGHT FREE to Mount Gambier on all products up to 2000L (except large trailers) Products above 2000L (except large trailers): 5% Freight surcharge to Adelaide transport depot (calculated off RRP) Tasmania 7% freight charge on all products up to 13000L (except large trailers) New South Wales FREIGHT FREE to Sydney metro on all products up to 2000L (except large trailers) Other products (except large trailers): 5% Freight surcharge to Sydney transport depot (calculated off RRP) Australian Capital Territory FREIGHT FREE to Canberra metro on all products up to 2000L (except large trailers) Other products (except large trailers): 5% Freight surcharge to Canberra transport depot (calculated off RRP) Queensland 5% to Brisbane metro on all products up to 2000L (except large trailers) Other products (except large trailers): 8% Freight surcharge to Brisbane transport depot (calculated off RRP) Northern Territory 12% to Darwin metro on all products up to 15000L (except large trailers) Western Australia 12% to Perth metro on all products up to 15000L (except large trailers) If you have any queries, please don t hesitate to call us on We look forward to shipping your order through our Dealer Direct Network! TTi - Product Catalogue

9 warranty Request Form Date: Distributor: Address: Contact Person: Phone: Customer Name: Address: Phone: Product Code: Date of Purchase: Brief description of warranty issue: Dust Suppression Units CALL TO LOCATE YOUR LOCAL DEALER MY LOCAL DEALER IS: Warranty Log (Office use only): tt tti.com.au Water Cartage Tanks PO Box 137, Nathalia, VIC, 3638 Murray Valley Hwy, Nathalia, VIC, 3638 PO Box 137, Nathalia, VIC, 3638 Murray Valley Hwy, Nathalia, VIC, 3638 Copyright Trans Tank International 2015 Catalogue All Rights Reserved