Customer Policies. L-Liquid Products. A-Ammonia Products. S-Specialty Equipment. E-Equipment. Forms. Salesmen Territories

Transcription

1

2

3 Customer Policies L-Liquid Products A-Ammonia Products S-Specialty Equipment E-Equipment Forms Salesmen Territories

4 CUSTOMER POLICY Delivery All orders for which a delivery date is not specified will normally be shipped as the limits of the warehouse stock indicate. Deliveries later than the shipping date specified on the sales order will be subject to approval by the purchaser prior to shipment. Special Orders are defined as orders for parts and units not normally stocked by Fairbank Equipment Inc. Special Orders will be subject to approval by the purchaser prior to ordering and cannot be returned for credit. Return Merchandise Procedures 1. Do not return merchandise to Fairbank without an authorization, as no credit will be issued. 2. Stock merchandise can be returned to us with out restocking charges providing the following conditions are met: a. Request for return is made within five working days from receipt of order. b. Merchandise is returned freight prepaid within five working days from receipt of order. c. Merchandise is in new condition d. Value of merchandise is over $ A 20% minimum restocking fee will be charged if the above conditions are not met. 4. Special order merchandise cannot be returned for credit. 5. No credit will be issued for under $ Unauthorized Returns Goods arriving at Fairbank Equipment Inc., without properly approved return authorization will be refused and returned to the sender. This does not include goods picked up by a Fairbank Equipment Inc., representative. Obsolete Or non-current production goods will not be authorized for return. Damaged Or used goods authorized for return that are received in any condition other than Like New will have the cost of renewal deducted from the credit. Catalog Prices All catalog pricing is subject to change. The pricing in this catalog should only be used as a guideline. Disposition A Return Authorization form that has been approved will be sent to the customer to be included with the return goods as a packing slip. Goods should then be shipped, Prepaid, to Fairbank Equipment Inc. Pricing Prices charged by Fairbank Equipment Inc., are dealer net or as otherwise indicated. Fairbank Equipment Inc., reserves the right to make changes in prices without notice and without liability therefor. Orders will be processed, unless noted to the contrary, at prices effective at the date of shipment. Minimum Billing Our minimum billing per invoice is $5.00. Freight All shipments shipped out of Wichita are F.O.B. Fairbank Equipment Inc., Wichita Kansas, unless otherwise specified in writing. Your order left Fairbank in good condition. Please carefully inspect it upon arrival. If the shipment is damaged, opened or short, note it on the bill-of-lading. Do not dispose of the cartons of packing. Do not return the merchandise to us. Contact the delivering carrier. Service Policy The person or organization (herein called the customer) purchasing the unit from Fairbank Equipment Inc., will be responsible for the unit being installed properly in accordance with the manufacturer or Fairbank Equipment Inc., instructions. Warranty New equipment and parts furnished to Fairbank Equipment Inc., by the manufacturer for resale by Fairbank Equipment Inc., are subject to the warranty program of that manufacturer. Warranty claims will be processed by Fairbank Equipment Inc., under each supplier s warranty policy when the goods are returned to Fairbank Equipment Inc. No Other Claims To Warranty Will Be Accepted. Goods returned to Fairbank Equipment Inc., for warranty processing will be returned freight prepaid. NOTE: Prices in this catalog are subject to change and should be used only as a guideline. For current pricing please log onto our website at: 2

5 PUM PS LIQUID

6 Liquid Products Index LIQUID ITEM PAGE ITEM PAGE Agri-Inject....L83 Banjo Transfer... L72-L73 Boom Buster Spray Nozzles & Chart... L30 CDS-John Blue (Squeeze, Injection, Piston, Centrifugal)... L77-L82 Chem-Blade...L123 Diaphragm... L86-L87 Chem Saver... L41, L49 Herbicide...L87, L91 Hypro Roller... L59-L63 Clamps (Hose)... L119 Hypro Centrifugal (New wet seal).. L64-L67 Couplings (Banjo).... L103-L106 Inject-O-Meter...L84 Scienco....L89, L90 CP Nozzles....L37 SHURflow...L85 Dura Products...L93 Push Lock Fittings... L58 Fittings Quick Caps (TeeJet)...L24 Flange... L97, L113-L114 Safety Equipment...L116 Hose... L110-L115 Spray Guns.... L121-L122 Pipe... L57, L107-L109 Spray Tips & Nozzles... L5-L37 Flange Fittings (Banjo)... L97, L113-L114 Boom Buster....L30 Flow Indicator CP Products...L37 Greenleaf... L26-L29 John Blue...L52 Hypro... L30-L36 Wilger...L51 Spray Systems... L5-L6 Foam Marker Systems...L120 TeeJet... L7-L25 Garden Hoes & Accessories... L115 Strainers... L97-L102 Gauges (Pressure)... L54 Streambars & Charts... L38-L39 Greenleaf... L26-L29 Tank Accessories....L56 Handler, The.... L124 TeeJet Adapters & Accessories.... L44 Hose Fittings (Banjo)... L112-L115 TeeJet Spray Tips Hose... L117-L118 Air Induction... L12- L13 AIXR Tips...L9 Hypro Spray Tips... L31-L36 Flat Spray...L10, L18 Inductors...L124 Induction....L11 Turbo Flood...L19 John Deere Retrofit Seal....L41 XR Tips...L7, L8 Liquid Blockage Monitor System...L53 TeeJet Nozzle Meter (Herbicide)... L88 BoomJet...L23 Micro-Tubing...L55 FloodJet...L20, L21 StreamJet Fertilizer....L14, L22 Mister Mist'r...L83 TwinJet Flat.... L15-L17 Mini Bulk Accessories...L92 TeeJet Quick Caps....L24 Nozzle Bodies (TeeJet) Pushlok Fittings (TeeJet)... L45 Dry... L40-L41 Valves.... L46-L50 Nylon...L43 Wet... L41-L42 ASCO Red Hat Solenoid...L49 Banjo Ball...L49, L94, L96 Nozzle Drops...L44 Banjo Electric...L47, L48 Pipe Fittings (Banjo)... L57, L107-L109 Butterfly... L96-L97 Directo...L46 Pump Engine Cover...L72 Nozzle Stop...L50 Pumps TeeJet....L49 Ace Centrifugal.... L68-L70 Wind Meters...L123 Ace Flanged....L71 Banjo Pump Parts.... L74-L76 L4

7 Spray Tips Variable Rate Nozzle Products SJ7-VR Replaces standard 03, 04, 05 & 06 SJ7 capacities Pressure range: PSI Flow range: GPM SJ7-VR NEW! SJ3-VR Replaces standard 03, 04, 05, 06 & 08 SJ3 capacities Pressure range: PSI Flow range: GPM PART # SKU PRICE PTC-VR-* Replaces standard thru -70 SJ7-VR 1354 $15.05 Pressure range: PSI SJ3-VR 1224 $13.60 Flow range: GPM PTC-VR-1/ $16.03 QJ-VR-*-* PTC-VR-5/ $16.03 Replaces standard thru-75 PTC-VR-3/ $16.03 Pressure range: PSI Flow range: GPM QJ-VR 1241 $13.79 QJ-VR-1/4-SS 2012 $22.35 SJ3-VR QJ-VR-*-* LIQUID QJ-VR-3/8-SS 2012 $22.35 QJ-VR-3/8-NYB 1490 $16.55 PTC-VR-* Hypro Flat Fan Thermoplastic Tips (80 ) TIP: 72, SKU 0065 CAP: 60, SKU 0054 Size Mesh Cap w/gasket 30-01F NYR 30-02F NYR 30-03F NYR 30-04F NYR 30-05F NYR 30-06F NYR 30-08F NYR Poly with SS Screens Standard Mesh SKU Price 8079-PP M-STR 8079-PP M-STR PP With Check Valve Mesh Opens at SKU Price 4193A-PP5-50SS 50 5 PSI 0213 $ A-PP2-100SS PSI 0213 $ A-PP5-100SS PSI 0213 $2.37 Turbo TeeJet (Poly) TIP: $3.93, SKU 0353 CAP: 62, SKU Mesh Cap w/gasket TT11001VP NYR TT110015VP NYR TT11002VP NYR TT11003VP NYR TT11004VP NYR TT11005VP NYR TT11006VP NYR TT11008VP NYR Air Induction Spray Tips SS Insert TIP: $7.96, SKU 0717 CAP: 70, SKU 0063 AIC Tip & Cap Combination: $8.63, SKU Mesh Cap w/gasket AI VS NYR AI11002-VS NYR AI VS NYR AI11003-VS NYR AI11004-VS NYR AI11005-VS NYR AI11006-VS NYR AI11008-VS N/A NYR AI11010-VS N/A NYR L5

8 Spray Tips Quick Turbo FloodJet, SS with Color-Coding Size Color SKU Price QCTF-VS15 Beige 1878 $20.86 LIQUID XR Extended Range (Smaller Sizes, SS Insert) TIP: $4.16, SKU 0375 CAP: 62, SKU 0056 XRC Tip & Cap Combination: $4.78, SKU Mesh Cap w/gasket XR-8001VS XR-11001VS NYR XR-80015VS XR VS NYR XR-8002VS XR-11002VS NYR XR-8003VS XR-11003VS NYR XR-8004VS XR-11004VS NYR XR-8005VS XR-11005VS NYR XR-8006VS XR-11006VS NYR XR-8008VS XR-11008VS NYR QCTF-VS20 White 1878 $20.86 QCTF-VS30 Yellow 1878 $20.86 QCTF-VS40 Red 1878 $20.86 QCTF-VS50 Gray 1878 $20.86 QCTF-VS60 Blue 1878 $20.86 QCTF-VS80 Black 1878 $20.86 QCTF-VS100 Light Blue 2563 $28.47 QCTF-VS120 Orange 2563 $28.47 Dual Flat Spray Tip AI3070 Air Induction 0441 $4.90 L6 Extended Range (Larger Sizers, SS) TIP: $4.94, SKU 0445 CAP: 70, SKU Mesh Cap w/gasket XR-8010SS XR-11010SS N/A NYR XR-8015SS XR-11015SS N/A NYR Even Flat Fan Tip SS Insert TIP: $3.72, SKU 0335 CAP: 62, SKU Mesh Cap w/gasket TP6501E TP8001EVS NYR TP65015E TP80015EVS NYR TP6502ESS TP8002EVS NYR TP6503ESS TP8003EVS NYR TP6504ESS TP8004EVS NYR TP6505ESS TP8005EVS NYR TP6506ESS TP8006EVS NYR TP6508ESS TP8008EVS NYR TP65010ESS TP80010EVS NYR TP65015ESS TP80015EVS N/A NYR NYR Cap for AI $1.28 Standard (SS Insert) TIP: $3.72, SKU 0335 CAP: 62, SKU Mesh Cap w/gasket TP8001-VS TP11001-VS NYR TP80015-VS TP VS NYR TP8002-VS TP11002-VS NYR TP8003-VS TP11003-VS NYR TP8004-VS TP11004-VS NYR TP8005-VS TP11005-VS NYR TP8006-VS TP11006-VS NYR TP8008-VS TP11008-VS NYR Hypro Flood Tip, Thermoplastic with Color-Coding Size Color SKU Price 30DT2.0 Red DT2.5 Brown DT3.0 Gray DT4.0 White DT5.0 Light Blue DT7.5 Lime Green DT10 Black DT15 Pink DT20 Purple

9 TeeJet XR Tips Features Excellent spray distribution over a wide range of pressures: PSI Ideal for rigs equipped with sprayer controllers Reduces drift at lower pressures, better coverage at higher pressures Available in stainless steel, ceramic and polymer in 80 and 110 spray angles with VisiFlo color-coding Ceramic is available with corrosive-resistant polypropylene VisiFlo color-coded tip holder in 80 capacities and 110 capacities XR only available in VK Brass available in 110 only Automatic spray alignment with *-CELR Quick TeeJet cap and gasket (old part number: *-NYR) Automatic spray alignment for sizes 10 and 15 with *-NYR Quick TeeJet cap and gasket At 15 PSI (1 bar) Pressure At 60 PSI (4 bar) Pressure LIQUID XR8001 XR11001 (100) XR80015 XR (100) XR8002 XR11002 (50) XR (50) XR8003 XR11003 (50) XR8004 XR11004 (50) XR8005 XR11005 (50) XR8006 XR11006 (50) XR8008 XR11008 (50) XR8010 XR11010 XR8015 XR11015 CAPACITY DROP CAPACITY 20 ONE SIZE ONE NOZZLE NOZZLE PSI IN GPA GALLONS PER 1000 SQ. FT. IN GPM 80º110º OZ./MIN. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH M F F F F F F F F VF F VF M F M F F F F F F F F F M M M F M F F F F F F F M M F F F F M M M M M F M F M F F F C M C M M M M M M F M F C M C M C M M M M M M F C C C C C M C M C M C M VC C VC C C C C C C M C M VC VC C C C M XC XC VC C C C Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). Available in all stainless steel only. Description SKU Price XR-VS Tip 0375 $4.16 XR-SS Tip 0445 $4.94 XR-VK Tip 0290 $3.22 XR-VP Tip 0169 $1.87 XR-VB Tip 0348 $3.87 CONTACT PRODUCT Spacing Optimum Spray Height SYSTEMIC PRODUCT DRIFT MANAGEMENT EXCELLENT GOOD GOOD GOOD* VERY GOOD* VERY GOOD* *At pressures below 30 PSI (2.0 bar) How to order: Specify tip number. Examples: XR8004VS Stainless Steel with VisiFlo color-coding XR11004-VP XR11004-VK Polymer with VisiFlo color-coding (110º only) Ceramic with polypropylene VisiFlo color-coding XR8010SS Stainless Steel XR11004VB Brass with VisiFlo color-coding (110 only) 20 Spray Height L7

10 TeeJet XR Tip & Cap Combo LIQUID Features Features: Excellent spray distribution over a wide range of pressures: PSI Excellent Ideal for spray rigs equipped distribution with over sprayer a wide range controllers80 available in stainless steel (015, 02, of Reduces pressures drift at lower PSI (1 4 pressures, bar). better coverage capacities) at higher and pressures ceramic (02, capacities). Ideal 80 available for rigs equipped in stainless with sprayer steel (015, controllers. 02,03-06 capacities) 110 available and ceramic in stainless steel ( (02, Reduces drift capacities) at lower pressures, better capacities), ceramic (02 08 capacities) and coverage 110 available at higher in pressures. stainless steel ( capacities), polymer ceramic ( (02-08 capacities). capacities) and polymer ( capacities) XR TeeJet tip molded into Quick TeeJet cap XR TeeJet tip molded into Quick TeeJet cap provides automatic spray alignment. Includes tightly fitting washer that stays put and assures a good seal and assures a good seal. At 15 PSI (1 bar) Pressure At 60 PSI (4 bar) Pressure XRC80015 (100) XRC8002 XRC11002 (50) XRC (50) XRC8003 XRC11003 (50) XRC8004 XRC11004 (50) XRC8005 XRC11005 (50) XRC8006 XRC11006 (50) XRC8008 XRC11008 (50) XRC11010 XRC11015 XRC11020 CAPACITY DROP CAPACITY 20 ONE SIZE ONE NOZZLE NOZZLE PSI IN GPA GALLONS PER 1000 SQ. FT. IN GPM 80º110º OZ./MIN. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 15 M M F F F F M M M F M F F F F F F F M M F F F F M M M M M F M F M F F F C M C M M M M M M F M F C M C M C M M M M M M F C C C C C M C M C M C M VC C VC C C C C C C M C M VC VC C C C M XC XC VC C C C XC XC VC VC VC VC Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). CONTACT PRODUCT Spacing SYSTEMIC PRODUCT Optimum Spray Height DRIFT MANAGEMENT EXCELLENT GOOD GOOD GOOD* VERY GOOD* VERY GOOD* *At pressures below 30 PSI (2.0 bar) How to order: Specify tip number. Examples: XRC11004-VS Stainless Steel with VisiFlo color-codin XRC11004-VP Polymer with VisiFl color-coding XRC11004-VK Ceramic with VisiFlo color-coding Description SKU Price XRC-VS Tip & Cap 0430 $4.78 XRC-VP Tip & Cap 0200 $2.23 XRC-VK Tip & Cap 0351 $ Spray Height L8

11 TeeJet AIXR Tips Features: Features Compact size to prevent tip damage. 110 wide, tapered flat spray angle with air induction technology offers better drift management Made drift management. of a two-piece UHMWPE polymer construction Depending with on the VisiFlo chemical, color-coding. produces UHMPE provides excellent chemical resistance, including acids, as well as exceptional wear life Made of a two-piece UHMWPE polymer air aspirator. Compact size to prevent tip damage construction with VisiFlo color-coding. Depending UHMPE provides on the excellent chemical, chemical produces large air-filled drops through a venturi air aspirator Removable resistance, including pre-orifice acids, as well as Available in seven tip capacities with Available exceptional in wear seven life. tip capacities with a wide operating a wide operating pressure pressure range: range: PSI Automatic alignment when used with *-CELR PSI (1 6 Quick bar). TeeJet cap and gasket (old part number: *-NYR) Automatic alignment when used with *-NYR Quick TeeJet cap and gasket. LIQUID Chamfer Removable O-Ring AIXR (100) AIXR11002 (50) AIXR (50) AIXR11003 (50) AIXR11004 (50) AIXR11005 (50) AIXR11006 (50) PSI DROP SIZE CAPACITY CAPACITY ONE ONE NOZZLE NOZZLE IN IN GPM OZ./MIN. GPA 20 GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 15 XC XC C C C M M M XC XC VC C C C M M XC XC XC VC C C C C XC XC XC VC C C C C UC XC XC XC VC VC C C UC XC XC XC VC VC C C UC XC XC XC VC VC C C Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). Air Inlet Exit CONTACT PRODUCT Spacing Optimum Spray Height 110 How to order: Specify tip number. Example: AIXR11004VP AIXR110 -VP Spray Tip (Cross Section View) SYSTEMIC PRODUCT Air Inlet DRIFT MANAGEMENT GOOD EXCELLENT EXCELLENT Spray Height Polymer with VisiFlo color-coding Description SKU Price AIXR Tip 0390 $4.33 L9

12 Turbo TeeJet Flat Spray Tips LIQUID Features Tapered edge wide angle flat spray pattern for uniform coverage in broadcast spraying Large, rounded internal passage to minimize clogging Excellent resistance to corrosive solutions Superior wear characteristics Larger droplets for less drift PSI Automatic spray alignment with *-CELR Quick TeeJet cap and gasket (old part number: *-NYR) Blockage-free passage means less clogging Unique inernal configuration means substantially longer wear life TT11001 (100) TT (100) TT11002 (50) TT (50) TT11003 (50) TT11004 (50) TT11005 (50) TT11006 (50) TT11008 (50) PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM CAPACITY ONE NOZZLE IN OZ./MIN. NOTE: Always double check your application rates. Tabulations are based on spraying water at 70 F. 20 GPA GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 15 C C M M M F F F VC C M M M F F F VC VC C M M M F F VC VC C M M M F F VC VC C C M M M F XC VC C C M M M M XC VC VC C C M M M XC VC VC VC C C C M XC VC VC C C C M M * * How to Order Specify tip number. Example: TT11001-VP - Polymer with VisiFlo color-coding TT11002-VP-C - Polymer with VisiFlo color-coding, includes Quick TeeJet cap and gasket 20 Description SKU Price Flat Spray Tip 0353 $3.93 L10

13 Turbo TeeJet Induction Tips Features: Removable 110 wide angle, air induction, tapered Insert flat spray spray tip pattern tip pattern based based on the on patented the patented outlet orifice design of the original Turbo TeeJet TeeJet nozzle. nozzle Mixing Chamber Patented orifice design provides large, round passages to to minimize plugging. Depending on on the the chemical, produces produces large air-filled drops through a Venturi air aspirator air resulting in in less drift. Note: All polymer construction for excellent for excellent with the 4193A check valve tip strainer. chemical and wear resistance. Compact size size to to prevent tip damage. tip damage Removable pre-orifice Ideal for use use with with automatic sprayer sprayer controllers controllers. Wide operating pressure range: PSI Wide Automatic operating alignment pressure when range: used with *-CELR Quick TeeJet cap PSI (1 7 and bar). gasket (old part number: *-NYR) Automatic alignment when used with *-NYR Quick TeeJet cap and gasket. vertical position TTI110 -VP Spray Tip (Cross Section View) Note: use or 8079-PP nozzle strainers Two internal air inlets One external air inlet LIQUID TTI (100) TTI11002 (50) TTI (50) TTI11003 (50) TTI11004 (50) TTI11005 (50) TTI11006 (50) PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM CAPACITY ONE NOZZLE IN OZ./MIN. GPA 20 GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 15 UC UC UC UC UC XC XC XC XC XC UC UC UC UC UC UC XC XC XC XC UC UC UC UC UC UC XC XC XC XC UC UC UC UC UC UC XC XC XC XC UC UC UC UC UC UC XC XC XC XC UC UC UC UC UC UC XC XC XC XC UC UC UC UC UC UC XC XC XC XC Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). CONTACT PRODUCT Spacing Optimum Spray Height 110 SYSTEMIC PRODUCT DRIFT MANAGEMENT 20 How to order: Specify tip number. Example: TTI11004-VP Polymer with VisiFlo color-coding 20 Spray Height Description SKU Price Induction Tip 0605 $6.72 L11

14 Air Induction Tips LIQUID Features Larger droplets for less drift Stainless steel insert produces a tapered edge flat spray pattern for uniform coverage in broadcast spraying Polymer insert holder and pre-orifice with VisiFlo color-coding Depending on the chemical, produces large air-filled drops through the use of a Larger Venturi droplets air aspirator for less drift. Available in in eight capacities with with a a recommended pressure rating PSI (2 8 bar). Automatic spray alignment with *-CELR Quick TeeJet cap and gasket (old part number: *-NYR) AI80015 AI (100) AI8002 AI11002 (50) AI80025 AI (50) AI8003 AI11003 (50) AI8004 AI11004 (50) AI8005 AI11005 (50) AI8006 AI11006 (50) AI11008 (50) CAPACITY DROP CAPACITY ONE 20 SIZE ONE NOZZLE NOZZLE PSI IN GPA GALLONS PER 1000 SQ. FT. IN GPM 110º OZ./MIN. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 30 UC XC XC VC VC VC C C UC XC XC VC VC VC VC C UC XC XC XC VC VC VC C UC XC XC XC VC VC VC C UC XC XC XC VC VC VC C UC XC XC XC VC VC VC VC UC UC XC XC XC VC VC VC UC UC XC XC XC VC VC VC Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). Note: this tip is not compatible with the 4193A check valve tip strainer. CONTACT PRODUCT Spacing SYSTEMIC PRODUCT DRIFT MANAGEMENT GOOD EXCELLENT EXCELLENT Optimum Spray Height How to order: Specify tip number. Example: AI11004-VS Stainless Steel with VisiFlo color-coding Spray Height Description SKU Price AI Tip 0717 $7.96 L12

15 Air Induction Tips & Cap Features: Features Produces a 110 tapered edge flat spray Available with Available a polymer with insert a polymer insert holder with spray pattern uniform coverage holder with stainless steel pattern for uniform coverage in broadcast the option of: stainless steel ( capacities), in broadcast spraying applications. ( capacities), ceramic spraying applications nozzle molded into ( capacities) ceramic or (025-05) polymer or polymer (02-10) AI TeeJet nozzle molded into Quick TeeJet Quick TeeJet cap provides (02 10 capacities) Larger inserts. droplets for less drift cap provides automatic spray alignment Depending on the chemical, produces large automatic spray alignment. Larger droplets for less drift. Includes tightly fitting washer that stays air-filled drops through the use of a Venturi air Depending on the chemical, put and assures a good seal aspirator that stays put and assures a good seal. through the use of a Venturi air aspirator. AIC (100) AIC11002 (50) AIC (50) AIC11003 (50) AIC11004 (50) AIC11005 (50) AIC11006 (50) AIC11008 (50) AIC11010 AIC11015 PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM CAPACITY ONE NOZZLE IN OZ./MIN. GPA 20 GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 30 UC XC XC VC VC VC C C UC XC XC VC VC VC VC C UC XC XC XC VC VC VC C UC XC XC XC VC VC VC C UC XC XC XC VC VC VC C UC XC XC XC VC VC VC VC UC UC XC XC XC VC VC VC UC UC XC XC XC VC VC VC UC UC XC XC XC XC VC VC UC UC XC XC XC XC VC VC Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). Description SKU Price AIC Tip & Cap 0777 $8.63 Note: compatible with the 4193A check valve tip strainer. CONTACT PRODUCT Spacing Optimum Spray Height 110 SYSTEMIC PRODUCT DRIFT MANAGEMENT GOOD EXCELLENT EXCELLENT 20 How to order: Specify tip number. Examples: AIC11004-VS Stainless Steel with VisiFlo color-coding AIC11003-VP Polymer with VisiFlo colorcoding AIC11003-VK Ceramic with VisiFlo colorcoding 20 Spray Height LIQUID L13

16 StreamJet Fertilizer Nozzles - 3 Outlet Nozzle LIQUID Typical Applications: Excellent for application of liquid fertilizer on bare ground or in standing crop Typical 3-stream Applications: pattern is ideal for directed application Excellent for application of liquid Features fertilizer on bare ground or in Three standing solid crop. streams of equal velocity Equally and capacity spaced distribution at 20 (50 cm) height. Removable metering orifice for easy cleaning 3-stream pattern is ideal for Ten Use with Quick TeeJet cap directed sizes application. for a wide range of application rates Equally spaced distribution at 20" height *-NYR. Features: Use with Quick TeeJet cap *-CELR All acetal (old construction part for number VisiFlo color-coding *-NYR) system. excellent chemical resistance. All Three acetal solid construction streams of equal for excellent Recommended chemical resistance operating Recommended velocity and capacity. operating pressure: pressure: PSI PSI (1.5 4 bar). Solid stream pattern minimizes leaf Solid burn stream and drift pattern minimizes leaf for easy cleaning. burn and virtually eliminates drift. Ten sizes for a wide range of application rates. Optimum Spray Height How to order: Specify tip number. Example: SJ3-03-VP Polymer with VisiFlo color-coding SJ3-015-VP (100) SJ3-02-VP (50) SJ3-03-VP (50) SJ3-04-VP (50) SJ3-05-VP (50) SJ3-06-VP (50) SJ3-08-VP SJ3-10-VP SJ3-15-VP SJ3-20-VP PSI CAPACITY ONE NOZZLE IN GPM 3 MPH 4 MPH 5 MPH 6 MPH 8 MPH GPA Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). 10 MPH 12 MPH 14 MPH 16 MPH 18 MPH 20 MPH Description SKU Price StreamJet $5.33 L14

17 Turbo TwinJet Flat Spray Tips Features Dual outlet design produces two 110 flat fan spray patterns The angle between each spray pattern is 60 forward and back Best suited for broadcast spraying where superior leaf coverage and canopy penetration is important Pressure ranges from PSI Available in eight VisiFlo color coded capacites - color represents total flow Ideal for use with automatic sprayer controllers LIQUID TTJ (100) TTJ (100) TTJ (100) TTJ (50) TTJ (50) TTJ (50) TTJ (50) TTJ (50) PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM CAPACITY ONE NOZZLE IN OZ./MIN. GPA 20 GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 20 C C M M M M M M VC C C M M M M M VC C C M M M M M VC C C M M M M M VC C C C M M M M VC C C C M M M M VC VC C C C C M M XC VC VC VC C C C C NOTE: Always double check your application rates. Tabulations are based on spraying water at 70 F. How to Order - Specify tip number. Example: TTJ VP - Polymer with VisiFlo color-coding TTJ VP-C - Polymer with VisiFlo color-coding, includes Quick TeeJet cap and gasket SKU Price 0424 $4.71 L15

18 TwinJet Flat Spray Nozzles LIQUID Features: Features Penetrates Penetrates crop crop residue residue or dense or dense foliage. foliage Smaller droplets for thorough coverage Smaller droplets for thorough coverage. Better spray distribution along boom than with hollow cone nozzle Better Available spray in distribution stainless steel along with boom VisiFlo than color-coding in 65, 80 and with hollow cone nozzles. 110 spray angles Available Recommended in stainless pressure steel with rating VisiFlo colorcoding Automatic in 65, spray 80 and alignment 110 spray with angles *-CELR Quick TeeJet cap PSI and Recommended gasket (old pressure part number: rating *-NYR) PSI (2 4 bar). Automatic spray alignment with *-NYR Quick TeeJet cap and gasket. TJ TJ (100) TJ (100) TJ TJ TJ (100) TJ TJ TJ (100) TJ TJ TJ (50) TJ TJ (50) TJ TJ TJ (50) TJ TJ TJ (50) TJ TJ (50) CAPACITY DROP CAPACITY 20 ONE SIZE ONE NOZZLE NOZZLE PSI IN GPA GALLONS PER 1000 SQ. FT. IN GPM 80º110º OZ./MIN. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 30 VF VF VF VF VF F F F VF F VF F VF F VF F F F F F F F F F F M F M F F F F F F F M M M M M M F F F F M M M M M M M F M F C M M M M M M M M M C M C M C M M M M M Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). CONTACT PRODUCT Spacing Optimum Spray Height How to order: Specify tip number. Example: TJ VS SYSTEMIC PRODUCT DRIFT MANAGEMENT Spray Height Stainless Steel with VisiFlo color-coding Description SKU Price Spray Nozzle 0652 $7.24 L16

19 Air Induction Turbo TwinJet Flat Spray Tips Features Air induction with dual 110 flat fan patterns 60 between leading and trailing spray patterns Best suited for post emergence applications Pressure ranges from PSI Excellent drift control with coarse to very coarse droplets Available in nine VisiFlo color coded capacities - color represents total flow LIQUID AITTJ VP (100) AITTJ VP (100) AITTJ VP (50) AITTJ VP (50) AITTJ VP (50) AITTJ VP (50) AITTJ VP (50) AITTJ VP (50) AITTJ VP (50) PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM CAPACITY ONE NOZZLE IN OZ./MIN. 20 GPA GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 20 XC VC C C C C C C XC VC VC C C C C C UC XC VC VC C C C C UC XC VC VC C C C C UC XC XC VC VC C C C UC XC XC VC VC C C C UC UC UC XC XC XC VC VC UC UC UC XC XC XC XC VC UC UC UC XC XC XC XC VC NOTE: Always double check your application rates. Tabulations are based on spraying water at 70 F. How to Order - Specify tip number. Example: AITTJ VP - Polymer with VisiFlo color-coding Description SKU Price AI TwinJet $4.88 AI TwinJet $5.62 AI TwinJet $6.92 (Use with Quick TeeJet cap *-CELR) 20 L17

20 VisiFlo Flat Spray Tips LIQUID Features Tapered edge flat spray pattern for uniform coverage in broadcast spraying VisiFlo color-coded version available in stainless steel, ceramic and polymer in 80 or 110 spray angles in selected sizes Available in ceramic 80 capacities and 110 capacities Standard version (not color-coded) available in 15, 25, 40, 50 and 65 spray angels in brass, stainless steel or hardened stainless steel Automatic spray alignment with *-CELR Quick TeeJet cap and gasket. (Old part number: *-NYR) Automatic spray alignment for sizes 10 through 20 with *-NYR Quick TeeJet cap and gasket. Description SKU Price VS 0325 $3.61 VP Brass 0219 $2.43 L18

21 Turbo Flood Tips Features: Excellent spray distribution for uniform uniform coverage coverage along the along boom. the boom Nozzle design incorporates a pre-orifice to produce to larger produce droplets larger for less droplets drift. for less drift Large, Stainless round steel orifice polymer reduces with clogging Stainless VisiFlo color-coding steel or polymer band for with VisiFlo color-coding band for easy size Can identification be used with CP25600-*-NYR Can Quick be TeeJet used with cap and CP25600-*-NYR gasket for automatic alignment. Quick TeeJet cap and gasket for automatic alignment QCT Cam Lever Coupling Adapter Provides easy change over from high capacity to lower capacity nozzles. Cam lever coupling. Corrosion-resistant stainless steel and polypropylene construction. Rated up to 100 PSI (7 bar). Use QJT-NYB Quick TeeJet. CP1325 Cap TFVS Turbo FloodJet Spray Tip QCT Cam Lever Coupling Adapter LIQUID CONTACT PRODUCT SYSTEMIC PRODUCT DRIFT MANAGEMENT TF- 2 (50) TF- 2.5 (50) TF- 3 (50) TF- 4 (50) TF- 5 TF- 7.5 TF- 10 PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM CAPACITY ONE NOZZLE IN OZ./MIN GPA GALLONS PER 1000 SQ. FT. 4 MPH 5 MPH 6 MPH 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH 10 UC XC XC VC UC UC XC XC UC UC XC XC UC UC XC XC UC UC UC XC UC UC UC XC UC UC UC XC Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). Specify material. VERY GOOD EXCELLENT Spacing Optimum Spray Height * * * by nozzle orientation. The critical factor is to achieve a minimum 30% overlap. How to order: Specify tip number. Examples: TF-VS4 Stainless Steel with VisiFlo color-coding TF-VP4 Polymer with VisiFlo color-coding Description SKU Price Stainless 0709 $7.87 Poly 0161 $1.79 Spray Height L19

22 Turbo FloodJet Nozzles LIQUID L20 The revolutionary Quick Turbo FloodJet nozzle combines the precision and uniformity of a flat spray nozzle with the clog-resistance and wide angle pattern of flooding nozzles. It uses an exclusive new design to increase droplet size and distribution uniformity. Features Patented turbulence chamber creates a dramatic improvement in pattern uniformity Pre-orifice design produces larger droplets for reduced drift The revolutionary Quick Turbo FloodJet Large, round orifice reduces clogging nozzle combines the precision and 1.26" diameter tip body fits into ¾" cam lever clog-resistance coupling and wide angle pattern Grooved side molding for automatic new design to increase droplet size and alignment distribution uniformity. Stainless steel with color-coding for easy size Features: identification Patented turbulence chamber creates Available a dramatic in improvement standard sizes in pattern from 1.5 GPM up to uniformity GPM at pressures of PSI. How to Order Specify droplets tip number. for reduced Example: drift. QCTF-VS40 - Stainless Steel with VisiFlo 1.26 color-coding cam lever coupling. Grooved side molding for automatic align ment. Stainless steel with color-coding Available Grooved side in standard molding sizes for automatic from 1.5 GPM up align to ment GPM (6.84 l/min to l/min) at Stainless pressures steel of with color-coding PSI (1 3 bar). How to order: Specify Available tip number. in standard sizes from 1.5 GPM Example: up to 24.0 GPM (6.84 l/min to l/min) QCTF-VS40 at pressures of Stainless PSI Steel (1 3 with bar). VisiFlo color-coding How to order: Specify tip number. Example: The SOIL revolutionary Quick Turbo FloodJet DRIFT INCORPORATED EMERGENCE MANAGEMENT QCTF-VS40 nozzle combines Stainless the precision Steel with and EXCELLENT VisiFlo EXCELLENT color-coding EXCELLENT clog-resistance and wide angle pattern SOIL INCORPORATED DRIFT MANAGEMENT new design to increase EMERGENCEdroplet size and distribution uniformity. EXCELLENT EXCELLENT EXCELLENT Features: Nozzle can be mounted between 0 and 45 Spacing Optimum Spray Height* Grooved side molding for automatic align 40 ment. 40 Stainless 60 steel with color-coding 60 Spray Height *When nozzle is mounted parallel to the ground. Available in standard sizes from 1.5 GPM up to 24.0 GPM (6.84 l/min to l/min) at pressures of PSI (1 3 bar). How to order: Nozzle betwee Optimu PSI CAPACITY LARGE CAPACITY QUICK FLOODJET ONE Patented GPAturbulence 60 chamber NOZZLES creates TYPICAL SPACING Specify IS 60 INCHES tip number. NOZZLE a dramatic improvement in pattern Example: IN GPM 4 MPH 5 MPH 6 MPH 7 MPH 8 MPH 9 MPH 10 MPH 12 MPH 14 MPH 16 MPH 18 MPH uniformity. QCTF-VS40 Stainless Steel with VisiFlo color-coding QCTF-VS droplets 43 for 37 reduced drift *When nozz SOIL DRIFT INCORPORATED EMERGENCE 12.4 MANAGEMENT QCTF-VS cam lever 49coupling EXCELLENT EXCELLENT 21 EXCELLENT CAPACITY QCTF-VS30 GPA 60 LARGE CAPACITY QUICK FLOODJE ONE NOZZLES 29 TYPICAL SPACING IS 60 I NOZZLE PSI 74IN GPM MPH 5 MPH 6 MPH 7 MPH 8 MPH 9 MPH 10 MPH QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS QCTF-VS Note: Always double check your application rates Tabulations are based on spraying water at 70 F (21 C) Note: Always double check your application rates Description SKU 140Price Tabulations are based on spraying water at 70 F (21 C). QCTF-VS Flood Nozzle $ Flood 198 Nozzle $ QCTF-VS

23 FloodJet Nozzles How to Order Specify tip number.examples: How TK-VS5 to order: - Stainless Specify Steel tip with number. VisiFlo color-coding Examples: TK-VP3 - Polymer with VisiFlo color-coding (B)1/4K-5 TK-VS5 - Brass Stainless Steel with VisiFlo color-coding TK-VP3 Polymer with VisiFlo color-coding TK-SS5 - Stainless Steel (B)1/4K-5 Brass (B)1/8K-SS5 - Stainless Steel TK-SS5 Stainless Steel QCK-SS100 - Stainless Steel with VisiFlo color-coding (B)1/8K-SS5 Stainless Steel QCK-SS100 Stainless Steel with VisiFlo color-coding 1/8K-.50 TK-.50 (100) 1/8K-.75 TK-.75 (100) 1/8K-1 TK-1 (100) 1/8K-1.5 TK-1.5 (50) [1/8K, 1/4K, TK]-2 TK-2 (50) [1/8K, 1/4K, TK]-2.5 TK-2.5 (50) [1/8K, 1/4K, TK]-3 [TK]-3 (50) [1/8K, TK]-4 (50) TK-4 (50) [1/8K, 1/4K, TK]-5 [TK]-5 (50) [1/8K, 1/4K, TK]-7.5 TK-7.5 (50) [1/8K, 1/4K, TK]-10 TK-10 (50) [1/8K, 1/4K]-12 [1/8K, 1/4K]-15 TK-15 [1/8K, 1/4K]-18 [1/8K, 1/4K]-20 TK-20 QCK-20 1/4K-22 1/4K-24 PSI CAPACITY ONE NOZZLE IN GPM 4 MPH 5 MPH 6 MPH GPA 40 8 MPH 10 MPH 12 MPH 15 MPH 20 MPH Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). Other spray angles, capacities, and materials may be available. See your TeeJet Dealer or for more information. (B) = BSPT 1/4K-27 3/8K-30 TK-30 QCK-30 3/8K-35 [3/8K, 1/2K]-40 QCK-40 3/8K-45 1/2K-50 QCK-50 1/2K-60 QCK-60 1/2K-70 [1/2K, 3/4K]-80 QCK-80 [1/2K, 3/4K]-90 3/4K-100 QCK-100 3/4K-110 [1/2K, 3/4K]-120 QCK-120 3/4K-140 QCK-150 3/4K-160 3/4K-180 QCK-180 3/4K-210 QCK-210 PSI CAPACITY ONE NOZZLE IN GPM (B)1/4K FloodJet 1 NPT) 4 MPH 5 MPH QCK Quick FloodJet 6 MPH GPA 60 8 MPH 10 MPH TK-VP FloodJet 12 MPH 15 MPH TK-VS FloodJet 20 MPH LIQUID L21

24 StreamJet Fertilizer Nozzles LIQUID Typical Application Removable metering orifice for Excellent for application easy cleaning of liquid fertilizer on bare Offered in a variety of sizes for ground Typical or in Application: standing crop a wide range of application rates 7-stream for easy cleaning. Excellent pattern for application is ideal of liquid VisiFlo color-coding for easy for broadcast fertilizer on application bare ground or in capacity identification standing crop. wide range of application rates. All acetal construction for Features VisiFlo color-coding for 7-stream pattern is ideal for excellent chemical resistance Creates broadcast seven application. identical Recommended fluid streams of equal All acetal construction operating for velocity Features: pressure: and capacity excellent chemical PSI resistance. Solid Excellent spray Recommended stream pattern operating streams of equal velocity and minimizes pressure: leaf burn PSI and (1.5 4 bar). distribution capacity. quality virtually Solid eliminates stream pattern drift minimizes Excellent spray distribution leaf burn and virtually eliminates quality. drift. Optimum Spray Height How to order: Specify nozzle number. Example: SJ7-04-VP NYB Extension Adapter SJ7-015-VP (100) SJ7-02-VP (50) SJ7-03-VP (50) SJ7-04-VP (50) SJ7-05-VP (50) SJ7-06-VP (50) SJ7-08-VP SJ7-10-VP SJ7-15-VP PSI CAPACITY ONE NOZZLE IN GPM 3 MPH 4 MPH 5 MPH 6 MPH 8 MPH GPA Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). 10 MPH 12 MPH 14 MPH 16 MPH 18 MPH 20 MPH Description SKU Price Fertilizer Nozzle 0610 $6.78 L22

25 BoomJet Nozzles Typical Application Boomless field spray applications Roadside and right-ofway applications End row & orchard spraying De-icing applications Forestry Features Unique orifice geometry produces a wide spray pattern while maintaining superior distribution across entire width Pre-orifice design minimizes drift Extra wide spray pattern - up to 18.5'- using a single nozzle Removable polymer pre-orifice Acetal or stainless steel construction for excellent chemical resistance Recommended spray pressure range: PSI NPT or BSPT (male) threads for easy installation Color-coding for easy capacity identification 10 capacity only available in VP PSI (1.5 4 bar). How to Order Specify part number. Example: (B)1/2XP80L(R)-VS - VisiFlo Stainless Steel left boom spray X X L C R LIQUID Y NOZZLE SPACING X = 20 W R, L CENTER NOZZLE C (B)1/4XP10R (B)1/4XP10L 1/4TTJ08 (B)1/4XP20R (B)1/4XP20L 1/4TTJ08 (B)1/4XP25R (B)1/4XP25L 1/4TTJ10 (B)1/2XP40R (B)1/2XP40L 1/4TTJ15 PSI DROP SIZE CAPACITY THREE NOZZLES IN GPM SPRAY WIDTH HEIGHT Y = 24 HEIGHT Y = HEIGHT 36 HEIGHT 4 MPH GPA FOR THREE NOZZLES GALLONS PER 1000 SQ. FT. GPA FOR THREE NOZZLES GALLONS PER 1000 SQ. FT. 6 MPH 8 MPH 10 MPH 15 MPH 20 MPH 2 MPH 30 UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC MPH 4 MPH 5 MPH 4 MPH 6 MPH 8 MPH 10 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH (B)1/4XP10R (B)1/4XP10L (B)1/4XP20R (B)1/4XP20L (B)1/4XP25R (B)1/4XP25L (B)1/2XP40R (B)1/2XP40L (B)1/2XP80R (B)1/2XP80L PSI DROP SIZE CAPACITY ONE NOZZLE IN GPM SPRAY WIDTH 24 HEIGHT 36 HEIGHT 4 MPH HEIGHT Y = 24 HEIGHT Y = 36 GPA FOR ONE NOZZLE GALLONS PER 1000 SQ. FT. GPA FOR ONE NOZZLE GALLONS PER 1000 SQ. FT. 6 MPH 8 MPH 10 MPH 15 MPH 20 MPH 2 MPH 3 MPH 20 UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC MPH 5 MPH 4 MPH 6 MPH 8 MPH 10 MPH 15 MPH 20 MPH 2 MPH 3 MPH 4 MPH 5 MPH Description SKU Price 1/4XP20L or R XP Nozzle 2698 $ /4XP25L or R XP Nozzle 2698 $29.97 Description SKU Price 1/2XP40L or R XP Nozzle 3214 $ /2XP80L or R XP Nozzle 3214 $35.70 L23

26 TeeJet Quick Caps Black White Red Blue Green Yellow Brown Orange Gray Violet QUICK TEEJET CAPS QUICK TEEJET CAP ONLY & SEAT GASKET SET bar NEW! *-CELR TeeJet Flat Spray Tips (Smaller Capacities) LIQUID CP PP CP * -NY PP * -NYR TP Standard 0067 Thru 08 XR 01 Thru 08 DG TeeJet TeeJet Flat Spray Tips (Larger Capacities) TP Standard 10 Thru 20 XR 10 Thru 15 TT TTJ60 Turbo TwinJet AIXR TeeJet OC TeeJet NEW! CP *-CE CP25597-PP *-CELR PP TJ60 TwinJet AI TeeJet and AIUB TeeJet SJ3 StreamJet DG TwinJet Turbo TeeJet Induction AITTJ60 Turbo TwinJet (02 06) CP NY NYR AI3070 AITTJ60 Turbo TwinJet (08 15) CP * -NY * -NYR TeeJet Flat Spray Tips (Smaller Capacities) Tips can be positioned in choice of two spray plane directions parallel or perpendicular to wings of Quick TeeJet cap. CP * -NY * -NYR Turbo FloodJet VisiFlo Spray Tip TK-VS FloodJet VisiFlo Spray Tip Locating Nib TK-VP FloodJet VisiFlo Spray Tip NEW! CP *-CE *-CELR TK FloodJet FL FullJet TX/TXA ConeJet TG Full Cone Hose Shank AITXA ConeJet CP PP PP NEW! CP *-CE D-Disc Core Core Seal CP18999-EPR (EPDM standard) CP18999-VI (Viton optional) Used with DC-Core Inserts and CP4916 Flow Regulators (Insert Core into Seal) Ceramic Disc-Core TXB ConeJet AITXB ConeJet CP NY NYR D-Disc Core TXR ConeJet CP NYB NYR NYR includes gasket and O-ring (CP7717-M10.5x1.5-VI) QJ /4- NYR NPT female threaded outlet QJ /4- NYR NPT female threaded outlet NEW! QJ4676-1/8-NYR nozzles. Can be used for mounting pressure gauge at the nozzle. QJ(B)4676-1/4- See Data Sheet for more information. NYR (B) = BSPT CELR NYR *Specify color code (see chart). Violet (10) only available in CP and CP caps. These Quick TeeJet caps available only in black. Polypropylene Quick TeeJet caps available only in gray and rated to 150 PSI. Nylon and Celcon caps not available in gray. L24

27 Metering Orifices Flow Regulators are usually mounted behind cultivator shanks for the subsurface application of liquid fertilizers and soil fumigants. They are also used for above-ground streaming applications. How to order: Typical Assembly Example: CP Plate with side marked with number facing the outlet. CP1322 1/4TT Body 5053 Strainer CP4916 Plate CP4928 Adapter NPT (F) Outlet CP1325 Cap LIQUID MATERIAL: Stainless Steel Metering orifices are usually used in planter and drill manifolds. They are also used for above ground streaming applications. Order by part number and size CP4916- SKU Price 0184 $2.05 the following equations: GPM = GPA x MPH x W (Per Nozzle) 5,940 GPA = 5,940 x GPM (Per Nozzle) MPH x W W = Nozzle spacing (in inches) for broadcast spraying. = Spray width (in inches) for single nozzle, band spraying or boomless spraying. = Row spacing (in inches) divided by the number of nozzles per row for directed spraying. Orifice Plug CP3942-SS When using metering orifices in QJ Caps, use orifice seal CP18999-EPR SKU Price into air at atmospheric pressure. If your application creates backpressure, or if spraying into a liquid, measure and calibrate to ensure proper application rates. For spraying solutions other than water, see page 125 for conversion factors. GPM GPM GPM 5 PSI 10 PSI 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP Note: Always double check your application rates. Tabulations are based on spraying water at 70 F (21 C). CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP PSI 10 PSI 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP PSI 10 PSI 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI L25

28 Greenleaf TurboDrop XL & Dual Fan Nozzle LIQUID TDXL SKU Price 0659 $7.66 TADF SKU Price 1084 $12.60 L26

29 Greenleaf Nozzles TurboDrop XL-D and TurboDrop DualFan-D The D Version of the TurboDrop nozzles were designed with dicamba, 2, 4-D and glyphosate in mind, where a coarser spray droplet is desirable. It is important to remember that as sprays become coarser, coverage may be compromised. Choosing the TurboDrop Dual Fan and alternating the nozzles on the boom will help counter the potential loss of coverage by effectively spraying the target four times in one pass. The D nozzles employ proven TurboDrop Venturi Technology to inject air and create a larger, more uniform droplet spectrum. The pattern tips are larger in comparison to those of the standard XL and DualFan nozzles, which results in a greater pressure drop and a larger overall droplet size. D series nozzles can be converted to standard TurboDrop nozzles by switching out the pattern tip(s) for smaller ones in order to make the spray less coarse for contact pesticides. Pressure Range: PSI ( PSI, ceramic) Suggested Boom Height: 18-36" (with 20" nozzle spacing) Materials of Construction: Polyacetyl, EPDM, Ceramic (TDCXL-D/TACDF-D) LIQUID TDXL-D SKU Price 0674 $7.83 TADF-D SKU Price 1084 $12.60 L27

30 Greenleaf Nozzles LIQUID Low Pressure AirMix Nozzle The AirMix Nozzle is a compact, two piece air injection nozzle that fits in a standard cap, and can be cleaned without tools. The AirMix utilizes a unique air cleaning system to prevent nozzle plugging. Please target 40 PSI when selecting nozzle size, to allow for changes in speed. Higher pressures are recommended for penetrating dense canopies and for coverage critical contact chemicals. Pressure Range: PSI Suggested Spray Height: 16-36" (on 20" centers) Materials of Construction: Polyacetyl, or Polypropylene with EPDM (AMCQ) Description SKU Price Low Pressure Nozzle 0283 $3.29 L28

31 Greenleaf Nozzles TurboDrop Variable Rate Fertilizer Nozzle This nozzle is designed to apply liquid fertilizer at a 4-5x flow rate range to allow for varying fertilizer requirements of the target crop. It is available in a six hole streaming version (TDVRF) for use on standard sprayers, and a hose barb version (TDVRHB) for tool bars, nitrogen applicators and other dedicated fertilizer rigs. The TurboDrop Variable Rate may be operated from PSI, allowing up to a 5x rate change at a given speed. Additionally, the TDVRF and TDVRHB can maintain a constant GPA rate over a 5x speed change. The TDVRF utilizes a six hole streaming tip in order to minimize potential leaf burn while maximizing fertilizer distribution, maintaining uniformity with varying spray heights. The TDVRHB utilizes a 3/8" hose barb for ease of installation of fertilizer rigs, and acts as a variable-flow metering orifice. LIQUID The TDVRF and TDVRHB are now "airless," providing a wider operating range, and eliminating the possibility of fertilizer spitting from the side. Accuracy is also improved. Pressure Range: PSI Materials of Construction: Polyacetyl, stainless steel, EPDM Description SKU Price TDVRF 2281 $26.52 TDVRHB 2307 $26.82 L29

32 Boom Buster & Hypro Nozzles Boom Buster Spray Nozzles All nozzles machined from solid Stainless Steel with replaceable industrial grade nylon diffusers. Tests have shown that this nylon will outlast Stainless Steel. Extra wide spray pattern for excellent pattern and distribution. All models spray chemicals and fertilizers and have pipe threads. Model SKU Price $ $ $ $ $ LIQUID Standard Nozzle Application Chart Gallons Per Acre (water used for all calculations) MODEL 125 ¼" Standard Pipe Thread LEVEL XT Series The XT introduces boomless spray technology, enabling spray to be targeted into places that conventional booms and other tips cannot reach. XT delivers a uniform spray pattern over a distance of up to 20 feet. Ideal for weed control over pastureland. The smallest size, the XT010, is especially useful for applications made using ATV sprayers. Available in SS and Poly Nozzle. Part# SKU Price (FC-) XT (*) $ $74.20 FC - Fast Cap *Represents number(s) which indicate color L30

33 Hypro Stream Spray Tips ESI Six Stream Ceramic Tip The Albuz ESI six stream tip is ideal for applying fertilizer into solid seeded crops. It creates six individual streams that distribute the fertilizer on the soil while getting less on the crop. The ceramic metering orifice and unique low pressure distribution chamber keep the streams stable to reduce atomization and prevent leaf burn and scorching. Spacing and spray height is similar to 110 broadcast tips. LIQUID Part# SKU Price FC-ESI110-(*) 0644 $7.16 *Represents number(s) which indicate color Hypro's SPRAY IT App Get the right spray nozzle by chemical brand, then size it for your application. 1. Select Nozzle by Chemical or Application 2. Choose Chemical Company & Chemical Name 3. The Recommended Nozzle is Shown on the Results Screen L31

34 Hypro Ultra Lo-Drift Fast Cap "ULD" Ultra Lo-Drift Dual Air Eduction This is an excellent drift management spray tip that won't compromise spray quality. Fast Cap Ultra-Lo-Drift FC-ULD with dual air eduction technology creates significant opportunity to increase spraying days without changing tips or spraying practices. The spray tip number is printed on the cap for easy identification. LIQUID Part# SKU Price FC-ULD120-(*) 0678 $7.53 *Represents number(s) which indicate color L32

35 Hypro Hi-Flow Hi-Flow 140 This tip series is the best way to outfit a sprayer to achieve wide angle coverage plus drift control. Ideal for pre-emerge application of fertilizers Excellent for high volume coverage or high speed applications 140 pattern ensures unmatched uniformity across the spray boom and throughout the entire pressure range (20-80 psi) Wide spray angle allows for lower spray height to reduce drift or wide nozzle spacing to match existing equipment Droplets under 100 microns are controlled to minimize fertilizer burn or pre-emerge drift LIQUID Part# SKU Price HF140-(*) 0814 $9.04 *Represents number(s) which indicate color L33

36 Hypro Guardian Nozzles Guardian spray tips are ready to attack from every angle. Ideal for insecticide and fungicide applications, the Guardian s unique 20 inclined spray pattern allows users to adjust the spray rearward, forward or as a twin spray to best suit the application target. LIQUID Part# SKU Price GRD120(*) 0466 $5.18 * Represents number(s) which indicate color L34

37 Hypro GuardianAIR Nozzles Hypro Guardian Air Spray Tips The Hypro GuardianAIR is the only spray tip with a pattern and droplet size scientifically designed to maximize coverage and productivity at spray rates around 10 GPA. This technology was originally developed by Hypro for the Syngenta Amistar nozzle and has been proven on millions of acres around the world. LIQUID Part# SKU Price FC-GA110(*) 0616 $6.84 *Represents number(s) which indicate color L35

38 Hypro GuardianAIR Twin Nozzles LIQUID Hypro Guardian Air Twin Tips Spray Pattern Guardian AIR Twin spray tips are the best choice for high coverage application where on-target spray delivery is important. They are ideal for low crops with complex canopies, such as vegetables, where thorough coverage of the target and protection of the surroundings are of high importance. High-coverage forward and rear facing fans help penetrate complex canopies Engineered to provide better coverage with more drops per gallon compared to other air-induced sprays Easy-to-install, patent-pending locking ring and 0-ring seal design FastCap complete includes tip, cap, gasket and integrated strainers FastCap complete includes tip, cap, gasket and integrated strainers Tip Droplet Size Size Pressure Flow Gallons per Acre 20 inch nozzle spacing GAL/1000 Ft2 110º (PSI) Rate MPH 20 inch nozzle spacing (GPM) C M M M M M M F F VC C M M M M M M M VC C M M M M M M M C M M M M M M M M VC C M M M M M M M VC C M M M M M M M VC VC C C M M M M M Common Use Pattern Technology Material Application Selection Guide Foliar Contact Foliar Systemic Excellent Excellent Soil Applied Drift Control Features Plant Health Tapered Flat Fan Air Eduction Polyacetal Spray Angle 110º Pressure Range Configuration Part Numbers FastCaps 110º GAT GAT GAT GAT GAT GAT GAT PSI FastCap Complete Very Good Replacement Tip Strainer TS mesh strainer for all sizes Part# SKU Price GAT110-(*) 0678 $7.53 *Represents number(s) which indicate color L36

39 CP Nozzles CP-65-TS Turbo Combo Nozzle The CP-65-TS Turbo Combo Nozzle assembly with quick disconnect. You can adjust droplet size and rates with this easy to use nozzle. You can select rates equivalent to flat fan sizes from 3 to 10 with a flood style nozzle. For an operating range from 25 to 60 PSI, the nozzle provides flow rates from 0.17 to 1.35 gallons per minute. A wide selectable range in droplet size allows flexibility to select droplet sizes to minimize spray drift near sensitive areas, yet allows selection of droplet sizes for coverage sensitive crop production products. Orifice #3 #4 #5 #6 #8 #10 30" Spacing - Gallons Per Acre Nozzle PSI GPM 6MPH 8MPH 10MPH 12MPH 14MPH 16MPH 18MPH Part# SKU Price CP65TS 2770 $30.78 LIQUID CP Quick Coupling Elbow Cam Lock These handy couplings let you change your nozzle angle. CP81C 45 Cam Lock El 1567 $17.41 CP81P 45 Elbow ¾" NPT 1567 $17.41 CP81-P1 45 Elbow 1" NPT 1567 $17.41 CP80C 90 Cam Lock El 1567 $17.41 CP80P 90 Elbow ¾" NPT 1567 $17.41 CP80-P1 90 Elbow 1" NPT 1567 $17.41 CP Floater TURBO CP Turbo Nozzles for floater or sprayers generate consistent large droplets with few driftable fines through a wide range of pressures. They are available in both low and regular volume versions for floaters and with six orifices for sprayers. They are also available in the CP Floater Combo in both volumes. Part# Type SKU Price CP59LS Low Volume $ CP59HV High Volume $ CP TURBO Combo CP Combos incorporate selectable nozzles and check valves in one unit and combine with three way, turbo or carousel nozzles. Part# Type SKU Price CP109LS Low $ CP109HV High $ Poly Filter Screen for Cam Locks CP Mesh Screen 0656 $7.29 Floater Check Valves Tired of leaking checks? Try these! CP110P ¾" NPT Floater Check Valve 5030 $55.88 CP110C 10C Cam Lock Check Valve 5030 $55.88 L37

40 Concord Nitrobar & Chafer 15" Streambar Chart LIQUID Nitro Streambar Convert your sprayer into a nitrogen applicator with Nitro- Bars. By adapting your sprayer with the Nitro-Bars, you have the control of applying nitrogen at the optimum time for increased yields. Part# SKU Price NITROBAR (Nitro Streambar) 0850 $9.44 Nitrobar Orifice Adapters Orange Orifice Adapter 0400 $ Red Orifice Adapter 0400 $ Blue Orifice Adapter 0400 $ Yellow Orifice Adapter 0400 $ Green Orifice Adapter 0400 $4.44 Chafer 15" Multi-Rate Streambar Chart Charts based on fertilizer with 1.28 SG. Flow rate of fertilizer is as a guide only and compensation may need to be made to rate controllers to achieve exact rates. L38

41 Chafer 20" Multi-Rate Streambar LIQUID Rate Adjustment Slide Bar Size SKU Price 15" & 20" 2250 $25.00 L39

42 Dry TeeJet Nozzle Bodies LIQUID Boom Quick Nozzle Body 90 Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0216 Price $2.40 Boom Quick Nozzle Body Tee Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0216 Price $2.40 Boom Quick Nozzle Body 90 Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0443 Price $4.92 Boom Quick Nozzle Body Tee Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0443 Price $4.92 Boom Quick Nozzle Body Cross Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0216 Price $2.40 Boom Quick Triple Nozzle Body Part# Hose ID 24230A NYB ¾" Hose Tee 24231A-NYB ¼" MPT 24216A-1-NYB 1" Wet Boom 24216A-3/4-NYB ¾" Wet Boom SKU 1183 Price $13.14 Boom Quick Nozzle Body 90 Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0536 Price $ Spray Position Nozzle Body 90 Elbow Part# Hose ID QJ363C NYB ½" QJ363C NYB ¾" QJ363C NYB 1" SKU 1046 Price $11.62 Boom Quick Nozzle Body Tee Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0536 Price $ Spray Position Nozzle Body Tee Part# Hose ID QJ363C NYB ½" QJ363C NYB ¾" QJ363C NYB 1" SKU 1046 Price $11.62 Boom Quick Nozzle Body Cross Part# Hose ID NYB 3 8" NYB ½" NYB ¾" SKU 0536 Price $ Spray Position Nozzle Body 90 Elbow Part# Hose ID QJ364C NYB ½" QJ364C NYB ¾" QJ364C NYB 1" SKU 1046 Price $11.62 L40

43 Dry & Wet TeeJet Nozzle Bodies 4 Spray Position Nozzle Body Tee Part# Hose ID QJ364C NYB ½" QJ364C NYB ¾" QJ364C NYB 1" SKU 1046 Price $ Spray Position Nozzle Body 90 Elbow Part# Hose ID QJ365C NYB ½" QJ365C NYB ¾" QJ365C NYB 1" SKU 1046 Price $ Spray Position Nozzle Body Tee Part# Hose ID QJ365C NYB ½" QJ365C NYB ¾" QJ365C NYB 1" SKU 1046 Price $11.62 TeeJet Adapter with Chem Saver Inlet-¼" MPT Outlet-Quick 10 PSI Opens Check Valve 300 PSI Maximum Part# SKU Price QJ8360-NYB 0270 $3.00 E-ChemSaver Electric Solenoid Shutoff 150 PSI max. pressure at min. voltage (12V) 0.6 GPM (2.27 l/min) at 5 PSI (0.34 bar) pressure drop and 0.8 GPM (3.0 l/min) at 10 PSI (0.7 bar) pressure drop Use with most diaphragm check valve equipped TeeJet nozzle bodies ¼ second response time Mini-DIN power cable available E-Chemsaver $ Shutoff Cable $9.07 John Deere Retrofit Seal Adapts to any Quick TeeJet wet boom nozzle body with the standard 3 8" diameter inlet to the larger 11 16" diameter John Deere high cpacity wet boom. Low cost alternative to replace high flow nozzle bodies on the John Deere sprayers Viton seals Retrofit gasket for large hole booms Part# SKU Price CP VI 0387 $4.30 TeeJet Adapter Inlet " female nozzle thread Outlet-Quick TeeJet Part# SKU Price QJT-NYB 0275 $3.06 LIQUID TeeJet Adapter with Chem Saver Inlet " female nozzle thread Outlet-Quick TeeJet 10 PSI opens check valve 300 PSI Maximum Part# SKU Price QJT8360-NYB 0294 $3.26 ChemSaver End Cap Part# PSI SKU Price NYB $ NYB $2.16 ChemSaver Diaphragm Part# Type SKU Price CP21953-EPR EPDM CP21953-VI Viton TeeJet Adapter Inlet-¼" MPT Outlet-Quick TeeJet 300 PSI Maximum Part# SKU Price QJ1/4TT-NYB 0148 $1.65 TeeJet Adapter Inlet-1 4" MPT Outlet-Quick TeeJet 45 Part# SKU Price /4-NYB 0148 $1.65 Adapter Inlet-¼" FPT Outlet 11 16" female nozzle thread Part# SKU Price 4676-NYB-1/ $1.38 L41

44 TeeJet Nozzle Bodies & Adapters LIQUID Adapter Inlet-¼" MPT Outlet-¼" FPT 45 Part# SKU Price $2.36 Adapter Inlet-¼" MPT Outlet 11 16" male nozzle thread Part# SKU Price CP8028-NYB 0095 $1.06 CP $1.47 CP1322-SS 0878 $9.76 Adapter Inlet-¼" FPT Outlet 11 16" male nozzle thread Part# SKU Price CP12094-NYB 0092 $1.02 Single Nozzle Body for Wet Boom Part# Clamp SKU Price on QJ17560A-1-NYB 1" Pipe 0234 $2.60 QJ17560A-1/2-NYB ½" Pipe 0234 $2.60 QJ17560A-3/4-NYB ¾" Pipe 0234 $2.60 Part# Clamp on SKU Price QJ NYB 1" Pipe 0532 $6.08 QJ /2-NYB ½" Pipe 0532 $6.08 QJ /4-NYB ¾" Pipe 0532 $6.08 Part# Clamp on SKU Price QJ363C-1-NYB 1" Pipe 0837 $9.30 QJ363C-3/4-NYB ¾" Pipe 0837 $9.30 QJ363F-1-NYB 3+1" Outlets 1045 $11.61 TeeJet Adapter Inlet-¼" FPT Outlet-Quick TeeJet 300 PSI Maximum Part# SKU Price QJ1/4T-NYB 0148 $1.65 QuickJet Clamps Part# Pipe Size SKU Price QJ111-1/2 ½" 0142 $1.58 QJ111-3/4 ¾" 0142 $1.58 QJ " 0142 $1.58 QJ111-11/4 1¼" 0142 $1.58 Part# Pipe Size SKU Price QJ111SQ-3/4 ¾" 0142 $1.58 QJ111SQ-1 1" 0142 $1.58 QJ111SQ-11/4 1¼" 0142 $1.58 QJ111SQ-11/2 1½" 0142 $1.58 Part# Clamp on SKU Price QJ364C-3/4- NYB ¾" Pipe 0837 $9.30 QJ364C-1-NYB 1" Pipe 0837 $9.30 QJ364F-1-NYB 4+1" Outlets 1045 $11.61 Part# Clamp on SKU Price QJ365C-3/4-NYB ¾" Pipe 0837 $9.30 QJ365C-1-NYB 1" Pipe 0837 $9.30 Part# Clamp on SKU Price QJ NYB 1" Pipe 0217 $2.41 QJ7421-3/4-NYB ¾" Pipe 0217 $2.41 L42 Spraying Systems Boomless Nozzles The 5880 boomless nozzle combines two off-center tips and three TeeJet nozzles for an overall wide swath flat spray. The 5880 also has a ¼" pressure gauge port. Available in sizes from Part# SKU Price /4-2TOC $ Swivel Spray Nozzles Large capacity off-center type 4629 single swivel nozzles for use as tractor mounted boomless nozzles. Also used for roadside spraying. Available in sizes from 10 to size 300. Part# SKU Price /4-TOC 9209 $102.31

45 Nozzle Body Fittings & Clamps 90 Elbow with Nut Part# Hose ID SKU Price NTL38 3/8" 0090 $1.00 NTL12 1/2" 0090 $1.00 NTL34 3/4" 0124 $ " 0729 $8.10 TeeJet Nozzle Caps Polypropylene nozzle caps thread into nozzle body to allow installation of hose barb adapters. CP8027-NYB STANDARD CAP CP18032A-NYB WINGED CAP CP1325 BRASS CAP CP1325-SS STAINLESS STEEL CAP 0479 $5.32 LIQUID Tee with Nut Part# Hose ID SKU Price NTT38 3/8" 0101 $1.12 NTT12 1/2" 0101 $1.12 NTT34 3/4" 0132 $ " 0729 $8.10 Boom Clamps Part# Pipe Size SKU Price AA111-1/2 1/2" 0245 $2.72 AA111-3/4 3/4" 0245 $2.72 AA " 0245 $2.72 Part# Square Tubing Size SKU Price AA111SQ-1 1" OD 0281 $3.12 AA111SQ-11/4 1 1/4" OD 0423 $4.70 Cross with Nut Part# Hose ID SKU Price T38C 3/8" 0208 $2.31 T12C 1/2" 0208 $2.31 T34C 3/4" 0235 $2.61 Nozzle Body Adapters ¼" Nozzle body adapter threads into manifold to allow installation of hose barb adapters. Part# Size SKU Price NB-1612 ½" NPT x NZT CP8028-NYB 11/16" M x 1/4" MPT Female Nozzle Body Adapter 0095 $1.06 Part# Size SKU Price CP12094-NYB ¼" FPT x Nozzle Thread 0092 $1.02 Body with Nut Part# Hose ID SKU Price 38D 3/8" D 1/2" QJT Adapter Can be attached to hose drops for use with Quick TeeJet caps. Part# SKU Price QJ1/4T-NYB 0148 $1.65 L43

46 TeeJet Adapters & Accessories LIQUID Nozzle Drops Hose drops connect to nozzle bodies to drop the spray area further down into the crop area. Available with standard and quick teejet nozzle bodies in 15" and 24" length. Standard Nozzle Part# Thread SKU Price NYB 15" 0424 $ NYB 24" 0472 $5.24 Quick Jet Cap Part# Thread SKU Price QJ NYB 15" 0641 $7.12 QJ NYB 24" 0641 $7.12 Swivel Nozzle Bodies Swivel nozzle bodies are primarily for use with tips employed for row crop spraying. A locknut holds swivel nozzle bodies in place at selected spray projection angle so they are not affected by jarring and vibration. Banjo Manifold Banjo s eight way manifold is commonly used on planters and sprayers. Polypropylene construction ¼" Pressure gauge port ¾" Inlet Eight ½" Outlets Rated at 100 psi Part# SKU Price TM075/ $20.76 Hose Barb Adapters Part# Size SKU Price K8414 ¼" K8438 ³/8" K8412 ½" Calibration Container These can be used to check for worn out tips /4T-NYB SINGLE 0458 $ /4T-NYB DOUBLE 0553 $6.14 Quick TeeJet Swivel Nozzle Bodies QJ8600 swivel Quick TeeJet nozzle body assemblies provide the same spray tip adjustability of a standard TeeJet threaded swivel plus the quick change and self features of the Quick TeeJet System. L44 QJ8600-1/4NYB SINGLE 0395 $4.39 QJ /4NYB DOUBLE 0475 $5.28 Part# Size SKU Price FJ100 32oz $9.05 FJ200 64oz $10.67 FJ oz $ Gal $84.76

47 TeeJet Pushlok Fittings Push to Connect Fittings Quick TeeJet push to connect nozzle bodies and fittings are designed to greatly improve the speed and ease of assembling systems utilizing small diameter, semi-rigid tubing. These bodies are ideal for liquid fertilizer application systems on planters and fertilizer toolbars. By eliminating threaded fittings and other components, plumbing system complexity is reduced and reliability is improved. Features and Benefits Allows flow shutoff to occur further downstream for improved fertilizer savings Compact, inline design for mounting in a variety of locations Maximum pressure rating of 100 PSI Integrated mounting lugs for easy installation using #10 or M5 screws or cable ties Available for both ¼" and 3/8" tubing sizes Rugged nylon construction for reliability and excellent chemical resistance For use with linear, low-density, polyethylene tubing Flow rate of 2.25 GPM at 5 PSI pressure drop, 3.18 GPM at 10 PSI pressure drop Choice of body, cap or body and cap combination Orifice plate can be easily installed between body and cap for precise flow regulation LIQUID PTC Assembly 1.1" PTC x PTC Body PTC Fitting 3/8", 5/16", 1/4" 1.1" PTC Body QJ /8-* QJ /16-* QJ /4-* Accepts #10 or MS screws 0.2" PTC Fitting 3/8", 5/16", 1/4" Accepts #10 or MS screws 0.2" 3.6" PTC Cap QJ /8 QJ /16 QJ /4 *1/4 turn removes/ attaches cap CP18999-EPR Gasket *To ease assembly, a lubricant compatible with EPR rubber is recommended 1.5" *Specify check valve opening pressure *PTC outlet & inlet sizes are identical 2.7" 100 PSI MAX pressure rating based on use with linear low density polyethylene tubing PTC assemblies include: PTC body, PTC QJ cap, & Cap gasket PTC caps use gasket P/N: CP18999-EPR Tubing Recommendations Ensure outside of tube is free from score marks and deburred before inserting into fitting Plastic tube: polyethylene, nylon, and polyurethane Soft metal tube: brass, copper, mild steel L45

48 Directo Valves LIQUID Spraying Systems 144A, 145 and 146 Directo Valve Control Valves Operates on 12VDC System Direct acting with large internal flow chamber to reduce the chances of clogging Stainless steel wetted parts provide additional corrosion resistance Continuous flow through bypass connection with flow to spray line controlled by valve on-off action. EPDM diaphragms and seat washers standard with viton optional 144A 3 4" VALVE 10 GPM flow Pressures up to 100 PSI 2.5 AMP current draw AA144A-1 ¾" inlet / ½" Outlet 8381 $ " VALVE Up to 18 GPM flow 145 pressures to 65 PSI 2.9 AMP current draw AA145H-1 1" inlet / 1" Outlet $ Three Way Directo Valve The three way solenoid operated DirectoValve control valve bypasses boom flow to maintain constant spraying pressure when one or more boom sections are shut off. Also used as a directional valve on foam markers. Pressures to 65PSI 8 GPM flow 2 AMP current draw AA144A-13 Complete Valve, ¾" x ½" Foam Marker Style $ PK-AB144-1-KIT 144 Old Style 1647 $18.29 PK-AB144A-1-KIT 144A New Style 1647 $18.29 PK-AB144A-1-VI 144A New Style - Viton 2463 $27.36 AB145H-VI-KIT 145H-VIT 4249 $47.21 CP15163-NYB 144A Coil 3035 $33.72 CP18605-NYB 145 Coil 6433 $71.47 L46

49 Banjo Electric Valves ¾", 1" & 1¼" Electric Valves 316 Stainless steel ball & stem Teflon seats Fiberglass reinforced polypropylene Viton O-rings 150psi maximum pressure 12-volt DC operated Stainless steel hard ware Internally fused/automatic reset Open/Closed Indicator ¾ Second response time Part# Size SKU Price EV075 ¾" $ EV100FP 1" $ EV125 1¼" $ LIQUID 1½" and 2" Electric Valves Teflon seats Fiberglass reinforced polypropylene Viton O-rings 316 Stainless steel ball & stem 12-volt DC operated Stainless steel hard ware 150 PSI maximum pressure Internally fused/automatic reset Open/Closed Indicator 1¼ second Response Time Part# Size SKU Price EV150 1½" $ EV200 2" $ EV204FP 2" $ LEV Series Electric Push Lock Valves 12 Volt DC Stationary current draw: less than 0.04 amps Rotating current draw: less than 0.40 amps Stall current: 0.75 amps Response time: 1/3 sec open to close TFM seats, EPDM seals Fiberglass reinforced polypropylene Integrated mounting slot Standard 3 wire configuration Max Pressure: 150 PSI at 70 F Part# Description Opening Thru Ball SKU Price LEV025PL ¼" Electric Valve 3/8" 9346 $ LEV025PLST ¼" Electric Valve 3/8" 9346 $ LEV038 3/8" Threaded 8516 $94.61 LEV038PL 3/8" Full Port Electric Valve 3/8" 9346 $ LEV038PLST 3/8" Full Port Electric Valve 3/8" 9346 $ LEV050 ½" Threaded 8516 $94.61 LEV050PL ½" Electric Valve 15/32" 9346 $ Spray Tip Adapter L47

50 Banjo Electric Valves LIQUID Banjo Three Way Electric Ball Valves Internally Fused with Auto Reset 316SS Ball & Stem Fiberglass Reinforced Polypropylene 12-Volt DC Operated Glass Reinforced PTFE Ball Seats FKM (Viton Type) O-Rings ¾ to 1¼ second response time 150 P.S.I. Maximum Pressure Size Side Load SKU Price BTM Load SKU Price ¾" EV075SL $ EV075BL $ Also available as a regulating valve with a four second response time. Flange Inlet / Threaded Outlet 1" EV100SL $ EV100BL $ ¼" EV125SL $ EV125BL $ ½" EV150SL $ EV150BL $ " EV200SL $ EV200BL $ Banjo Manifold Assembly Draws wettable powders from inductor tank for chemical mixing. Installed after pump, suction completely empties inductor tank. This system keeps tank free of chemicals and can be installed with inductor tanks upon request. Part# Discription SKU Price MIS220HBA 2" Manifold Venturi System $ MIS300A 3" Manifold Venturi System $ *Can be installed on Fairbank Inductor tanks. ASCO Red Hat Solenoid Valves The solenoid is an electromagnetic part of a valve, comprised of a coil, coretube, core and enclosure. The ASCO RedHat brand offers the worlds largest selection of 2-way, 3-way and 4-way solenoid valves, designed to handle the most demanding fluid control applications. 8210G2 ½" 12V, Solinoid $ G3 ¾" 12V, Solinoid $ ½" Repair Kit $ ¾" Repair Kit $ Spraying Systems Pressure Regulating Valve Aluminum or Brass Construction Stainless steel spring ¾" inlet and outlet PSI pressure range Other models up to 700 PSI Part# SKU Price /4" $ /4"- AL $34.82 Spraying Systems Diaphragm Relief Valve Recommended pressure range of up to 300 PSI Nylon inlet body with aluminum bonnet ¾" inlet and outlet 70 GPM flow rate ¼" gauge port 300 PSI working pressure Part# SKU Price / $38.07 L48

51 TeeJet Valves Manual Control Valve Molded of corrosion resistant polypropylene Maximum pressure 150 PSI Molded in mounting flange ¾" inlet ½" outlet 12.5 gpm capacity ¼" npt gauge port Repair Kit PK-AA6B Part# SKU Price AA6B 2756 $30.62 Chemsaver Diaphragm Check Valve Made of nylon with celcon bonnet Opens at 7PSIG Up to 15gpm flow rating for ¾" Valve Part# SKU Price /2"-NYB 4694 $ /4"-NYB 4694 $52.15 AB12328-KIT (Repair Kit) 2135 $23.72 CP12335-FA (Replacement Diaph.) 0239 $2.65 LIQUID Spraying Systems Manual Three Section Boom Control Valve For selective control of three section boom at pressures up to 300 PSI Use to open any of three boom section lines in any desired combination. Aluminum construction with stainless steel and plastic internal parts ¾" inlet and three ¾" outlets with ¾" PRV outlet and ¼" pressure gauge port Repair kit PK-AB17KIT Diaphragm Relief Valve Polypropylene with stainless steel spring Pressures up to 150psi ¾" NPT inlet and outlet ½" port for pressure gauge Part# SKU Price /2- PP 2042 $ /4-PP 1988 $22.68 Part# SKU Price AA17Y 7001 $ Series Electric Shutoff Valves These ball valves are available with E or EC series motors and with cable or DIN electrical connection Features: 25 RPM, 0.6 second shutoff fully open to close Flexible inlet/outlets provide quick simple plumbing for a single vavle. Available in 2-way or 3-way versions. 2-way valves allow complete shutoff while the 3-way valves divert flow to a bypass line when boom controls are shut off. Part# Size SKU Price 344BEC-24-C 1" $ DirectoValve Electric Motors Boom Control motors are 22 RPM for 344B series (0.7 second shutoff valves) and 25 RPM for 346B and 356 series (0.6 second shutoff valves) for 12 VDC systems. Available with E or EC series motors with DIN or CABLE versions. E type motors work with DPDT (double pole, double throw) switch. EC type motors work with simple SPST (single pole, single throw) on/ off switch and are compatible with all sprayer controls. Part# SKU Price CP $ C $ C $ L49

52 Nozzle Stop Valves LIQUID Banjo Poly Air Actuated Shutoff Valves Part# Description Max PSI Pipe Size Pressure Differ. QTY SKU Price Each PV075 ¾" x ¾" Poly Pinch Valve 70 ¾" 15 to 20 PSI $44.92 PV075V ¾" FKM (viton type) Poly Pinch Valve 70 ¾" 15 to 20 PSI $80.35 PV100 1" x 1" Poly Pinch Valve 70 1" 15 to 20 PSI $44.92 PV100V 1" x 1" FKM (viton type)pinch Valve 70 1" 15 to 20 PSI $80.35 PV " x ¾" Poly Pinch Valve 70 1" x ¾" 15 to 20 PSI $44.92 PV V 1" x ¾" FKM (viton type) Pinch Valve 70 1" x ¾" 15 to 20 PSI $80.35 PV B 1" x ¾" Poly Pinch Valve Female Coupler 70 1" x ¾" 15 to 20 PSI $51.87 PV BV 1" FPT x ¾" Female Coupler FKM (viton type) Poly Pinch Valve 70 1" x ¾" 15 to 20 PSI $75.84 Attention: The polypropylene air actuated valve is a normally open valve, and has a maximum liquid pressure of 70 P.S.I. The pressure differential (pressure it takes to close valve) of the valve is 15 to 20 P.S.I. Replacement Parts PV075-PV Item Part# Description SKU QTY Price 1 PV " End Plate for Pinch Valve $ PV07257 ¾" End Plate for Pinch Valve $ PV10254 Poly Pinch Valve Body $ PV10265 EPDM Rubber Bladder Seal $ ¼" Drain Plug $ O-Ring for Drain Plug EPDM Banjo Nozzle Pipe Adapters Banjo Nozzle Adapters eliminate the need for threading pipe or welding stainless steel pipe. Quick and easy assembly 350 orientation Double O-Ring Seals EPDM Seals Standard, Viton Optional Made from glass reinforced polypropylene Stainless steel hardware Maximum operating pressure 150psi M100PA 1" Flanged Pipe Adapter 2676 $29.73 M100PAT 1" Flanged Pipe Ad. Tee 2974 $33.04 M100PLG 1" Flanged Adapter Plug 0153 $1.70 WR " Poly Pipe 0218 $2.28 L50

53 Wilger Flow Indicators Exclusive Individual Column Flow Indicators with o-ring seal and clip lock connectors for leak free operation Customize units for exact needs When operating, balls hover at about the same level, depending on flow rate A ball lower than the others indicates plugged tip Convenient for service or repair no more replacing the entire body Each indicator column supplies up to three nozzle tips GREAT FOR PLANTERS! LIQUID Flow Indicator Assembly and Parts Includes body, Ball Retainer, O-Ring Seal, 2 lock U-Clips and Black, Green Red and Stainless Steel Balls 1153 $12.81 Hose Shanks ³/8" Straight 0149 $ ½" Straight 0149 $ ¾" Straight 0149 $ ³/8" 90 Elbow 0152 $ ½" 90 Elbow 0149 $ ¾" 90 Elbow 0151 $1.68 Other Components ¼" NPT Street Elbow 0149 $ Female ORS x Male ORS 90 End Cap 0320 $ ORS Cap 0181 $ ORS Male x ORS Male x ORS FE Tee 0398 $ ORS Male x ORS Blind x ³/8" FE Isolator Tee 0332 $ ORS Male x ORS Male x 1" NPT FE Tee 0404 $4.49 L51

54 John Blue Flow Indicators LIQUID Customize Your Visual Flow Monitor System Get the exact number of flow monitors for spraying or fertilizer applications by simply clasping single columns or sets of 4 Flow Monitors together with stainless steel clips and Viton O-rings Ports are standard NPT - Use barbs or convenient push connect fittings for simple installation A ball higher than the others indicates hoses or fittings supplied by that specific flow monitor are broken or have a leak Most parts are interchangeable with other brands VisaGage for Use with Sprayers SMSS1 Single Flow Monitor Assembly - Spray type 1902 $21.13 includes single body, 3 8" NPT female inlet and outlet, (5) ½" diameter balls, end cap, Vito n O- rings and stainless steel retainer clips SMSS4 Set of Four Flow Monitor Assembly - Spray type includes 4 bodies, ½" NPT female inlet, 3 8" NPT female outlet, (20) ½" diameter balls, end cap, Viton O-rings and stainless steel retainer clips 6024 $66.92 VisaGage for Use with Flow Dividers or Squeeze Tube Pumps SMFD1 Single Flow Monitor Assembly-Flow Divider Type 1413 $15.70 includes single flow divider monitor body, 3 8" NPT female inlet and outlet, (5) ½" diameter balls, end cap, Viton O-rings and stainless steel retainer clips SMFD4 Set of Four Flow Monitor Assembly,- Flow Divider type includes 4 bodies, 3 8" NPT female inlet and outlet, (20) ½" diameter balls, end cap, Viton O- rings and stainless steel retainer clips 5296 $58.84 VisaGauge Orifice Selector Turn your VisaGauge II into a self-contained orifice changing system Select from one of the 4 orifice settings on the two discs provided No more getting wet from fertilizers or chemicals when changing orifices Adjustment is quick, no need to travel to each row unit and work with plumbing near the ground SMPT-0SA1 Single orifice selector kit 2041 $22.67 SMPT-0SA4 Set of 4 orifice selector kit 7093 $78.81 L52 VisaGage for Use with NH3 Now you can monitor NH3 (anhydrous ammonia) application flow directly from the cab of your tractor. No more second-guessing if a delivery line is plugged! The VisaGage NH3 Flow Monitor and Blockage System helps you identify which row is being under-applied before yields are diminished. Our patented system shows you both low-flow and no-flow problems in real time so you can correct it immediately saving you valuable time and money. SMFD2-NH3 Flow Monitor Assembly NH3, Set of $74.96 SMFD4-NH3 Flow Monitor Assembly NH3, Set of $123.17

55 John Blue Liquid Blockage Systems Liquid Blockage Monitor System Detects Low Flow and Blocked Lines Know immediately if an outlet is plugged, thus causing possible variations in your application rates See a visual display and hear an audible alarm on the control panel from your tractor cab Can be used with cloudy or dark liquids and NH3 Available in 3 options: standard wired control panel, ipad wireless, or Android wireless system Premium System (Wireless) The LBMS App is free and available from either the Apple App store or the Android Google Play Store. Part# BMi-08 BMPT-001 Description Premium 8 Row Kit Includes: ipad ram mounting bracket, Input harness, 28ft. extension harness, Wireless sensor kit, Standard sensor kit, Two terminator plugs 4-Row Sensor Expansion Kit for adding to BMi-08 - Includes: Standard sensor, Tee harness, Magnet balls and hardware LIQUID Standard Control Panel (Wired) Part# BM-08AP BM-08PL Description Applicator 8 Row Kit Includes: Control panel with mount bracket, Input harness, 28ft. extension harness, Tee harness, 2 standard sensor kits, 2 terminator plugs Planter 8 Row Kit Includes: Control panel mounting bracket, Input harness, 28ft. extension harness, Tee harness, 2 standard sensor kits, 2 terminator plugs, 2 15ft. extension harnesses BMPT Row Sensor Expansion Kit for adding to BM-08AP and BM-08PL - includes: Standard sensor, Tee harness, Magnet balls and hardware ISOBUS System The CDS-John Blue ISOBUS Liquid Blockage Monitor System is an automatic warning system that lets the operator know when the ball (and flow) in an individual row has dropped below a selected level in a CDS-John Blue Visagage II flow monitor. The system also gives real-time ball level updates for each row as it is running using a properly equipped ISOBUS compatible VT (virtual terminal) display. ISOBUS Program Display Visagage II Part# BM-08ISO BM-08ISO-JD Description Universal Input Harness John Deere Splice Harness Job Computer LBMS Sensor Miscellaneous Components SMPT-0009 Ball Storage Unit holds up to 40 balls. Lid can be locked 0557 $6.19 SMPT-0014 Tee for sprayer style to make 8 unit system with gauge port 0499 $5.54 SMPT " stainless steel ball for use with high flow rates 0169 $2.19 SMPT-0034 Orifice plate o-ring Use with CP4916 orifice plates L53

56 Pressure Gauges LIQUID Standard Dry Gauge This standard gauge with brass internals is typically used on sprayers where brass is compatible with chemicals being sprayed. 2½" Dial ¼" MPT lower Part# SKU Range Price # # $ # # $ # $ # $ # $ # # $5.64 Stainless Liquid Filled Gauge All the features of the liguid filled gauge with a stainless steel tube " or 4" dial 1 4" lower connection. Part# SKU Dial Range Price WGGSS ½" 60# $42.02 WGGSS " 60# $45.66 WGGSS ½" 100# $42.02 WGGSS " 100# $44.67 WGGSS " 100# $34.83 WGGSS ½" 400# $42.02 Ammonia Gauge Although this is an ammonia gauge, it is often used on sprayers because of its stainless steel construction. 2½" Dial ¼" MPT lower Part# SKU Range Price WO # $12.80 WO # $12.80 WO # $12.80 Ammonia Gauge-4" Dial This ammonia gauge with 4" dial is easy to read stainless steel construction. 4" Dial ¼" MPT lower Part# SKU Range Price WO # $23.40 WO # $27.54 WO # $26.02 Blumhardt Gauge with Stabilizer Stabilizer prevents liquid from reaching gauge. Also prevents bouncing needle. Part# SKU Range Price G # $ G # $72.50 Gauge Isolator Isolates fluid from gauge for protection. Part# SKU Price 23800A-1/ $67.87 Hypro Gauge Dampener Part# SKU Price B301AB 1330 $14.78 Liquid Filled Gauge A liquid filled gauge resists needle bouncing. This gauge has brass internals, 2 1 2" dial and a 1 4" MPT lower connection. Part# SKU Range Price GG # $17.55 GG # $17.55 GG # $17.55 Hypro High Pressure Gauge Part# SKU Price $ $60.43 L54

57 Micro-Tube Components Micro-Tubing Agri-Inject s innovative Micro-Tube System allows you apply precisely the right amount of liquid in precisely the right place. It s ideal for use on wheat drills, planters, cultivators and tillage equipment. Precise placement is key in today s farming. With the Micro-Tube System from Agri-Inject, you can accurately place precise amounts of fertilizer and crop protection products into the furrow or soil during tilling, planting or cultivating. Key Benefits Microtube Uniformity and Accuracy Pumps a uniform stream of fluid through a network of precision tubing to deliver exact amounts at exactly the right place. Patented engineering Our manifold system is unlike any other in evenly dispersing and applying liquid throughout the tube system. No drift Fluid is placed directly into the furrow or soil to reduce and eliminate drift. Increased Safety No nozzles or orifices to adjust or unclog, reducing exposure to products. Versatile System adjusts to liquids of various viscosities and can even apply more than one product at once. Custom Configuration Each system is tailored for the individual implement. Just provide the specifics of your equipment and needs and we ll custom designs a system for your needs. Ease of Use Just fill the supply tanks, start the system and begin planting, cultivating or tilling. Micro Tube Size Range O.D. =.250 I.D. =.100 O.D. =.250 I.D. =.110 O.D. =.250 I.D. =.125 O.D. =.250 I.D. =.150 O.D. =.250 I.D. =.170 O.D. =.250 I.D. =.157 O.D. =.156 I.D. =.060 O.D. =.156 I.D. =.080 O.D. =.156 I.D. =.088 LIQUID O.D. =.156 I.D. =.100 O.D. =.156 I.D. =.110 Divider Port, ½" Divider Port, ½" Divider Port, 3/8" Divider Port, 3/8" Divider Port, 3/8" Manifold Row, 5/32" Divider Port, ½" Manifold Row, ¼" L55

58 Tank Accessories LIQUID Banjo Poly Bulkhead Fittings All Banjo poly bulkhead fittings are standard double threaded with EPDM Gaskets. Viton gaskets are available. Also available in Stainless Steel. Part# Size Hole Gasket# SKU Price TF050 ½" 1 5 8" 150G 0492 $5.47 TF075 ¾" 1 5 8" 150G 0492 $5.47 TF100 1" 2¼" 200G 0586 $6.51 TF125 1¼" 2¼" 200G 0682 $7.85 TF150 1½" 3" 300G 1050 $11.66 TF200 2" 3" 300G 1050 $11.66 TF220 2" 3¼" TF220G 1341 $14.90 TF300 3" 4½" TF300G 2249 $24.99 NOTE: for viton replacement gaskets, add V to part no. Banjo Bolted Tank Fittings Polypropylene Bolted Tank Fittings feature SS bolts Part# Size Gasket BF075 ¾" BF100GE BF100 1" BF100GE BF125 1¼" BF100GE BF150 1½" BF200GE BF200 2" BF200GE BF220 2" full port 200G BF300 3" BF300GE NOTE: for viton replacement gaskets, add V to part no. Banjo Poly Siphon Tube Part# Size SKU Price ST200 2" 1256 $13.96 ST300 3" 1858 $20.64 TCA Tank Car Adapter Used on railcar to adapt outlet fitting to cam lock fitting Part# Size SKU Price TCA30X50AL 3" x 5" 6941 $77.12 TCA40X50AL 4" x 5" 9163 $ Steel King Nipples Part# Size SKU Price 12KC ½" 0323 $ KC ¾" 0375 $4.16 1KC 1" 0487 $ KC 1¼" 0655 $ KC 1½" 0677 $7.52 2KC 2" 0837 $9.30 3KC 3" 1651 $ KC 4" 2552 $28.35 Stainless Steel King Nipples Part# Size SKU Price A6132-SS 1 8" MPT x 3 8" HB 0474 $5.27 A1438-SS ¼" MPT x 3 8" HB 0837 $ KC-SS ½" 1231 $ KC-SS ¾" 1234 $ KC-SS 1" 1240 $ KC-SS 1¼" 1582 $ KC-SS 1½" 1940 $ KC-SS 2" 2625 $ KC-SS 3" 6848 $ KC-SS 4" $ L56

59 Stainless Pipe Fittings 90 S.S. ELBOW 45 S.S. ELBOW 90 S.S. ST. ELBOW S.S. TEE Size Part# Size Part# Size Part# Size Part# ¼" 14X90ESS ¼" 14X45ESS ¼" 14X90SESS ¼" 14TSS 3 8" 38X90ESS 3 8" 38X45ESS 3 8" 38X90SESS 3 8" 38TSS LIQUID ½" 12X90ESS ½" 12X45ESS ½" 12X90SESS ½" 12TSS ¾" 34X90ESS ¾" 34X45ESS ¾" 34X90SESS ¾" 34TSS 1" 1X90ESS 1" 1X45ESS 1" 1X90SESS 1" 1TSS 1¼" 114X90ESS 1¼" 114X45ESS 1¼" 114X90SESS 1¼" 114TSS 1½" 112X90ESS 1½" 112X45ESS 1½" 112X90SESS 1½" 112TSS 2" 2X90ESS 2" 2X45ESS 2" 2X90SESS 2" 2TSS 3" 3X90ESS 3" 3X45ESS 3" 3X90SESS 3" 3TSS 4" 4X90ESS 4" 4X45ESS 4" 4X90SESS 4" 4TSS S.S.Reducer Bushing S.S. Bell Reducer S.S. Coupling S.S.Pipe Plugs Size Part# Size Part# Size Part# Size Part# ½" x ¼" 12X14BSS ½" x ¼" 12X14RSS ¼" 14CSS ¼" 14PSS ¾" x ½" 34X12BSS ¾" x ½" 34X12RSS 3 8" 38CSS 3 8" 38PSS 1" x ¾" 1X34BSS 1" x ¾" 1X34RSS ½" 12CSS ½" 12PSS 1¼" x 1" 114X1BSS 1¼" x 1" 114X1RSS ¾" 34CSS ¾" 34PSS 1½" x 1¼" 112X114BSS 1½" x 1¼" 112X114RSS 1" 1CSS 1" 1PSS 2" x 1½" 2X112BSS 2" x 1½" 2X112RSS 1¼" 114CSS 1¼" 114PSS 3" x 2" 3X2BSS 1½" 112CSS 1½" 112PSS 4" x 3" 4X3BSS 2" 2CSS 2" 2PSS 3" 3CSS 3" 3PSS 4" 4CSS 4" 4PSS S.S.PIPE Nipples Close Short 2" 3" 4" 6" 8" 10" 12" ¼" 14XCNSS 14XSNSS 14X2NSS 14X3NSS 14X4NSS 14X6NSS 14X8NSS 14X10NSS 14X12NSS 3 8" 38XCNSS 38XSNSS 38X2NSS 38X3NSS 38X4NSS 38X6NSS 38X8NSS 38X10NSS 38X12NSS SIZE ½" 12XCNSS 12XSNSS 12X2NSS 12X3NSS 12X4NSS 12X6NSS 12X8NSS 12X10NSS 12X12NSS ¾" 34XCNSS 34XSNSS 34X2NSS 34X3NSS 34X4NSS 34X6NSS 34X8NSS 34X10NSS 34X12NSS 1" 1XCNSS 1XSNSS 1X2NSS 1X3NSS 1X4NSS 1X6NSS 1X8NSS 1X10NSS 1X12NSS 1¼" 114XCNSS 114XSNSS 114X2NSS 114X3NSS 114X4NSS 114X6NSS 114X8NSS 114X10NSS 114X12NSS 1½" 112XCNSS 112XSNSS 112X2NSS 112X3NSS 112X4NSS 112X6NSS 112X8NSS 112X10NSS 112X12NSS 2" 2XCNSS 2XSNSS 2X3NSS 2X4NSS 2X6NSS 2X8NSS 2X10NSS 2X12NSS 3" 3XCNSS 3XSNSS 3X4NSS 3X6NSS 3X8NSS 3X10NSS 3X12NSS L57

60 Push Lock Fittings-AutoLock Couplings These couplings are ideal for use in air lines on sprayers. Made of durable nylon and work with air line listed below: LIQUID Part MC Male Connector Part# Tube OD Thread SKU Price 8JMC14018 ¼" 1 8" 0111 $1.23 8JMC14014 ¼" ¼" 0127 $1.41 8JMC14038 ¼" 3 8" 0166 $1.84 8JMC " ¼" 0181 $2.01 8JMC " 3 8" 0211 $2.34 8JMC12038 ½" 3 8" 0280 $3.11 8JMC12012 ½" ½" 0302 $3.36 More connections are available call or check the website for all the push lock couplings we carry. Part TC Tee Connector Part# Size SKU Price 8JUTC140 ¼" 0239 $2.66 8JUTC " 0295 $3.28 8JUTC120 ½" 0341 $3.79 Part MT Male Tube Stem Part# Tube OD Thread SKU Price 8JMT14018 ¼" 1 8" JMT14014 ¼" ¼" JMT14038 ¼" 3 8" JMT " ¼" JMT " 3 8" JMT12038 ½" 3 8" 0146 $1.62 8JMT12012 ½" ½" 0152 $1.69 Part UC Union Connector Part# Size SKU Price 8JUC140 ¼" 0149 $1.66 8JUC " 0222 $2.47 8JUC120 ½" 0258 $2.87 Fixed Elbow MPT x Tube Part# Size SKU Price 8JME ¼" 0187 $2.08 8JME " 0308 $3.42 8JME ½" 0206 $2.29 Part ULC Union Elbow Connector Part# Size SKU Price 8JULC140 ¼" 0187 $2.08 8JULC " 0280 $3.11 8JULC120 ½" 0334 $3.71 Female Adaptor Part# Size SKU Price 8JFC140140NPT ¼" x ¼" FPT 0259 $2.88 8JFC380140NPT 3 8" x ¼" FPT 0297 $3.30 8JFC " x 3 8" FPT 0454 $5.04 Cross Part# Size SKU Price 8JCR ½" 0497 $5.52 L58 2 Way Divided Connector Part# Size SKU Price 8J2WDC516 5/ 16 " 0255 $2.83 8J2WDC140 ¼" 0269 $2.99 8J2WDC " 0286 $3.18 Air Line Tubing Outside(D) Inside(D) SKU Price ¼" 1 8" ft 3 8" ¼" ft ½" 3 8" ft

61 Hypro 4000 Roller Pump 4000 Series - 4 Roller Max. flow: 4001: 9 GPM at 1800 RPM 4101: 7 GPM at 2600 RPM Max. pressure: 150 PSI Max. speed: 4001: 1800 RPM 4101: 2600 RPM Shaft size: 5 8" solid Port size: ¾" NPT Max. fluid temperature: 140 F Cast Iron, Ni-Resist or Silver Series housing available Pump shaft rotation: CW (CCW available) Weight 5 lbs: 2.27 kg Rollers: Super Rollers standard (Poly, Teflon and Buna-N) Shaft seals: Viton standard (Buna-N, leather available) PTO Coupler: " x 5 8" hollow shaft adapter Common Repair Parts Body with Standard Seal Qty. Part No. No. Fits Pump C (Cast Iron) (4001) C (Cast Iron) (4101) N (Ni-Resist) (4001) N (Ni-Resist) (4101) X (Silver Cast) (4001) X (Silver Cast) (4101) Rotor and Shaft Assembly C (Cast Iron) (4001) C (Cast Iron) (4101) N (Ni-Resist) (4001) N (Ni-Resist) (4101) X (Silver Cast) (4001) X (Silver Cast) (4101) Rotor and Shaft Assembly N (Ni-Resist) (4001) N (Ni-Resist) (4101) 3B X (Silver Cast) (4001) X (Silver Cast) (4101) LIQUID Part# SKU Price 4101C-A $ C-A $ Series (12V) - 4 Roller Includes 12-volt DC electric motor Max flow: 7.5 GPM Max Pressure: 50 PSI Weight 18 lbs. Pump shaft ½" Super rollers standard Part# SKU Price 4101N-AEH $ Repair Kit Kit Includes: (4) Rollers #5 (1) O-Ring #6 (2) Viton Seals #8 Shaft Only Shaft Only All All Rotor Set Screw All except Silver Cast Silver Cast Only Rollers Super Rollers (Standard) Buna-N (Optional) O-Ring Gasket for Endplate All 6 Seal 3A 3C 5 8 Ball Bearing Viton (Standard) Buna-N (Optional) All Adapter with 4 Set Screws " x 5 8" (gas engine) " x 3 4" Part# SKU Price $26.41 Parts Below for All 4000 Series Pumps (Ref. No. 16) Shaft Bearing Cover (Ref. No. 17) Bearing Cover (Ref. No. 18) Locking Collar (Ref. No. 19) Set Screw (Ref. No. 20) Base (Ref. No. 21) Bumper (Ref. No. 22) Bolt (Ref. No. 23) Lock Washer L59

62 Hypro 6500 Roller Pump LIQUID 6500 Series - 6 Roller 1" hose barb inlet fitting for 1000 RPM operation Rollers: Super Rollers standard (Poly & Teflon) Shaft seals: Viton standard Max. fluid temperature: 140 F/60 C Shaft rotation: Counter clockwise when looking at the shaft end (clockwise available) Port size: ¾" NPT Max. flow: 9.7 GPM at 540 RPM 18.2 GPM at 1000 RPM Max. pressure: 300 PSI Max. speed: 1200 RPM Shaft size: 5 8" solid Weight: 9 lbs. 6500C Cast Iron Housing $ C-R Reverse Rotation $ N Ni-Resist $ XL Silvercast $ Common Repair Parts Ball Bearing Seal 2 4 Qty. Part No. No. Fits Pump All Viton (Standard) Buna-N (Optional) Leather (Optional) Endplate Bolt All 5 End Plate with Standard Seal C (Cast Iron) (6500C) N (Ni-Resist) (6500N) X (Silver Cast) (6500X) O-Ring Gasket for Endplate All 7 Rollers Super Rollers (Standard) Polypropylene (Optional) Buna-N (Optional) Teflon (Optional) Multispeed PTO Coupling For 540 RPM, 1,000 RPM Part# SKU Price $42.87 Repair Kit Includes: (6) rollers #9, (1) O-Ring #7, (2) Viton seals #4 Part# SKU Price $31.73 Rotor and Shaft Assembly C (Cast Iron) (6500C) N (Ni-Resist) (6500N) X (Silver Cast) (6500X) Shaft Only All Rotor Set Screw All except Silver Cast Silver Cast only Body with Standard Seal C (Cast Iron) (6500C) N (Ni-Resist) (6500N) X (Silver Cast) (6500X) Bearing Cover All Shaft Bearing Cover All L60

63 Hypro 7700 Roller Pump 7700 Series - 7 Roller Max. fluid temperature: 140 F/60 C Shaft rotation: Counter clockwise when looking at the shaft end (clockwise available) Rollers: Super Rollers standard (Poly & Teflon) Shaft seals: Viton standard Port size: ¾" NPT Max. flow: 14.2 GPM at 540 RPM 22.1 GPM at 800 RPM Max. pressure: 200 PSI Max. speed: 800 RPM Shaft size: 15 16" solid Weight 14 lbs LIQUID Part # Description SKU Price 7700C Cast Iron Housing $ N Ni-Resist $ XL Silvercast $ Common Repair Parts Ball Bearing Seal 3 4 Qty. Part No. No. Fits Pump All Viton (Standard) Buna-N (Optional) Leather (Optional) O-Ring Gasket for Endplate All Rotor and Shaft Assembly C (Cast Iron) CCW rotation N (Ni-Resist) CCW rotation X (Silver Cast) CCW rotation 8A Shaft Only C (Cast Iron) CW rotation N (Ni-Resist) CW rotation X (Silver Cast) CW rotation All Rotor Set Screw All except Silver Cast Silver Cast only Multispeed PTO Coupling Part# SKU Price $42.87 Key Rollers All Super Rollers (Standard) Buna-N (Optional) Repair Kit Kit Includes: (7) rollers #12 (1) O-Ring #7 (2) Viton Seals #4 Part# SKU Price $46.75 Body with Standard Seal C (Cast Iron) N (Ni-Resist) X (Silver Cast) Bearing Cover All Shaft Bearing Cover All L61

64 Hypro 7560 Roller Pump LIQUID 7560 Series - 8 Roller Shaft rotation: Counter clockwise when looking at the shaft end (clockwise available) Rollers: Super Rollers standard (Poly & Teflon) Max. Flow: 12 GPM at 540 RPM 22.5 GPM at 1000 RPM Max. pressure: 300 PSI Max. speed: 1000 RPM Shaft size: 15 16" solid Port size: ¾" NPT Max. fluid temperature: 140 F Weight 13 lbs: 5.89 kg Shaft seals: Viton standard 7560C Cast Iron Housing $ C-R Reverse Rotation $ N Ni-Resist $ XL Silvercast $ Common Repair Parts Ball Bearing Seal 3 4 Qty. Part No. No. Fits Pump All Viton (Standard) Buna-N (Optional) Leather (Optional) O-Ring Gasket for Endplate All 7 Rollers Super Rollers (Standard) Buna-N (Optional) Rotor and Shaft Assembly C (Cast Iron) N (Ni-Resist) X (Silver Cast) Shaft Only All 10 Rotor Set Screw All except Silver Cast 10A Silver Cast only Key All 11 Multispeed PTO Coupling For 540 RPM, 1,000 RPM Part# SKU Price $42.87 Body with Standard Seal C (Cast Iron) N (Ni-Resist) X (Silver Cast) Bearing Cover All 25 Repair Kit Kit Includes: (8) rollers #8 (1) O-Ring #7 (2) Viton Seals #4 Part# SKU Price $46.75 Shaft Bearing Cover All 26 L62

65 Hypro 1500 Roller Pump 1502 Series - 6 Roller Max. flow: 33.1 GPM at 540 RPM 62.1 GPM at 1000 RPM Max. pressure: 150 PSI Max. speed: 1000 RPM Shaft size: 15 16" solid Port size: 1½" NPT Max. fluid temperature: 140 F Cast Iron, Ni-Resist or Silver Series housing available Pump shaft rotation: CCW (CW available) Weight 30 lbs.; 13.6 kg Rollers: Super Rollers standard (Poly, Teflon available) Shaft seals: Buna-N standard (Viton, leather available) 1502C Cast Iron Housing $ Common Repair Parts Ball Bearing 3 Qty. Part No. No. Fits Pump All LIQUID Seal Viton (Optional) Buna-N (Standard) Leather (Optional) O-Ring Gasket for Endplate All Rotor and Shaft Assembly C (Cast Iron) CCW N (Ni-Resist) CCW X (Silver Cast) CCW Shaft Only Key 8A C (Cast Iron) CW N (Ni-Resist) CW X (Silver Cast) CW All All Multispeed PTO Coupling For 540 RPM, 1,000 RPM Part# SKU Price $42.87 Repair Kit Kit Includes: (6) Super rollers #12 (1) O-Ring #7 (2) Viton Seals Part# SKU Price $61.74 Rotor Set Screw All except Silver Cast Silver Cast only Rollers Super Rollers (Standard) Polypropylene (Optional) Body with Standard Seal C (Cast Iron) N (Ni-Resist) X (Silver Cast) Bearing Cover All Shaft Bearing Cover All L63

66 Hypro Centrifugal Hyd. Driven Pump LIQUID 9305 Series Hydraulic motor drive (for open and closed center systems) Max. flow: 190 GPM/719 LPM (free flow) Max. pressure: 180 PSI/12.4 BAR (in closed center operation) (Shut off) Port sizes: 2" NPT inlet, 1½" NPT outlet Max. fluid temperature: 140 F/60 C Housing: cast iron Impeller: glass-filled nylon Motor: internal gear gerotor Hydraulic ports: ½" NPT Motor capacity: 20 GPM/75.7 Ipm Max. motor PSI: 2000 continuous duty, 2200 intermittent duty Weight: 48 lbs./21.8 kg Centrifugal shaft seals: Viton/ceramic are standard Hydraulic motor seal: double-lip Teflon 9305C-HM3C 2"x1½", 20 GPM $1, S Series High performance and high efficiency centrifugal pumps Designed for high efficiency, resulting in higher flow at working pressure The Life Guard silicon carbide seal comes standard in all 316 stainless steel models and is available as an option in cast iron models Available with universal flanged ports (300 x 220 or 220 x 220) for quicker installation and serviceability 9306S-HM5 is hydraulic driven for open/closed systems. 2" x 1½" Max 212 GPM. 9306S-HM5C 2" x 1½", Stainless Steel pump with Hydraulic motor $1, S-HM5C-U 222x200 Flg, Stainless Steel pump with Hydraulic motor $1, Repair Kits Pump Repair Kit 5867 $ Seal Kit $ P2 Impeller 8962 $99.57 L64

67 Hypro Centrifugal Hyd. Driven Pump 9306C & 9304C (Discontinued) Series Hydraulic motor drive (for open or closed center systems) Centrifugal Shaft Seals: Viton/Ceramic standard Max. pressure: 130 PSI, 180 PSI (in closed center operation) Port size: 2" NPT inlet, 1½" NPT outlet Hydraulic ports: ½" NPT Weight 21 lbs: 9.52 kg Max. fluid temperature: 140 F Max. flow: GPM Cast Iron housing Hydraulic motor: Internal gear gerotor Hydraulic motor seal: double lip Teflon Common Repair Parts Item No. Qty. Part No. No. Fits Pump Pump Casing (Volute) C All Impeller Nut All Impeller C Cast Iron Mechanical Seal Viton, (standard) Body O-Ring All LIQUID Part# Desc. SKU Price 9306C- 2" x 1½", Silicon $ HM1C-B carbide seal,13 GPM 9306C- 220 x 200 Flanges $ HM1C-U 9306C- HM3C 2" x 1½", 24 GPM $ C- HM3C-BU 9306C- HM5C 9306C- HM5C-B 9306C- HM5C-BU 9306C- HM5C-B3U 2" x 1½", 24 GPM motor, silicon carbide seal, 220x200 flgs 2" x 1½", 17 GPM motor 2" x 1½", Silicon carbide seal, 17 GPM 220 x 200 flgs, silicon carbide seal, 17 GPM 300 x 220 flgs, 17 GPM motor $ $ $ $ $ Mounting Flange C All Slinger Ring All Retaining Ring All Snap Ring All Ball Bearing All Spacer All Shaft Seal All Seal Spacer All Thrust Bearing Assembly All Snap Ring All Shaft HM2 and HM4 Roll Pin HM2 and HM4 Front Motor Body with Main Bearing C All Hydraulic Motor Complete C HM3C C HM5 Repair Kits Centrifugal Pump (1) O-ring #6, Mechanical seal #5, Rubber gasket #45 Part# SKU Price $42.37 Hydraulic Motor (1) Ball bearing #14, Motor shaft seal #6, Rubber gasket #45 Part# SKU Price $65.18 L65

68 Hypro Centrifugal Hyd. Driven Pump LIQUID 9303C Series Hydraulic Driven Hydraulic motor drive (for open or closed center systems) Max. flow: GPM Max. pressure: 130 PSI, 180 PSI (in closed center operation) Port size: 9303C, 1½" NPT inlet, 1¼" NPT outlet Impeller: glass filled nylon Max. fluid temperature: 140 F Cast Iron housing Weight 21 lbs: 9.52 kg Centrifugal Shaft Seals: Viton/ceramic standard Hydraulic motor: Internal gear gerotor Hydraulic ports: ½" NPT Hydraulic motor seal: double lip Teflon 9303C-HM1C 1½"x1¼",12 GPM $ C-HM1C-B ^ Same w/ Silicon $ carbide seal 9303C-HM1C-BU ^ Same with $ x 200 Flg 9303C-HM4C 1½"x1¼", 7 GPM $ C-HM4C-B ^ Same w/ silicon $ carbide seal 9306C-HM5C 1½"x1¼", 17 GPM $ Common Repair Parts Pump Casing (Volute) Qty. Part 2 No. No. Fits Pump C All Impeller Nut Impeller All P Nyglass, (standard) P Polypropylene (optional) Mechanical Seal Viton, (standard) Body O-Ring All Mounting Flange C All Slinger Ring All Retaining Ring All Snap Ring Ball Bearing Spacer Shaft Seal All All All All Seal Spacer All 17 Thrust Bearing Assembly All 18 Part# SKU Price $ $ Part# SKU Price $65.18 Repair Kits Centrifugal Pump: (1) Mechanical seal #5 (1) O-ring #6 (1) Rubber Gasket #45 Hydraulic Motor: (1)Ball bearing #14, (1) Motor shaft seal #6 (1) Rubber gasket #45 Snap Ring All Shaft HM2 and HM4 Roll Pin HM2 and HM4 Front Motor Body with Main Bearing A All 23 Hydraulic Motor Complete HM HM4 Silicone Carbide Seal Kit Motor Size HM1C 1/2" HM3C 1" HM4C 5/16" HM5C 5/8" 19 L66

69 Hypro Centrifugal Pump HYPRO 9310 Series ForceField Centrifugal Pumps Superior Wet Seal Protection FORCEFIELD FEATURES AND BENEFITS ForceField Technology is a superior wet seal technology that provides the ultimate protection for the mechanical seal and avoids costly downtime Protects the mechanical seal against common failures related to dry run and chemical bonding by using a barrier fluid to keep it cool and lubricated Actively maintains a pressure differential between the barrier fluid and the pumping solution, which results in longer life and worry free operation Designed to be a drop-in replacement for standard Hypro hydraulically driven centrifugal pumps, call for complete details. Available in Stainless Steel or Cast Iron. LIQUID 9202C & 9203C Series Port size: 9202C, ¼" NPT inlet, 1" NPT outlet Port size: 9203C, 1½" NPT inlet, 1¼" NPT outlet Pedestal mount, direct drive Max. flow: GPM Max. pressure: 170 PSI Max. speed: 6000 RPM Solid 5 8" Shaft Impeller: glass filled nylon Max. fluid temperature: 140 F Housing cast iron Pump shaft rotation: CCW or CW Weight 15.5 lbs: 7.03 kg Shaft seals: Viton standard Part# SKU Price 9202C $ C $ C-R $ Accessories MCH2 Heavy duty clutch $ MCH2-CW ^ Same, with clockwise rotation $ Common Repair Parts Qty. Part No. No. Fits Pump Impeller Nut All Impeller P Nylon, (standard) P Polypropylene (optional) Body O-Ring All Mechanical Seal Viton, (standard) Seal Retainer All Slinger Ring All Ball Bearing All Key All Shaft All Key All Bearing Retainer All Gasket All L67

70 ACE Centrifugal Pump LIQUID Hydraulic Driven Hydraulic motor drive (for open or closed center systems) Max flow: 60 GPM (310), 75 GPM ( ) Max pressure: 60 PSI (310), 100 PSI ( ) Port size: 1¼" NPT inlet, 1" NPT outlet Impeller: Valox, cast iron (optional) Cast Iron housing Viton mechanical seal Hydraulic motor: gear type Hydraulic ports: 3 8" NPT ( ) - ½" NPT (310) 204 Motor - Requires 4 GPM hydraulic fluid input Recommended for: John Deere type pressure compensating closed center systems Open center systems with capacities from 4 to 13 gpm Part# SKU Price FMC-HYD $ Motor - Requires 8 GPM hydraulic fluid input Recommended for: Case IH type load sensing closed center systems. Open center systems with capacities from 8 to 17 gpm Part# SKU Price FMC-HYD $ Motor - Requires 16 GPM hydraulic fluid input Recommended for: large open center systems with capacities from 16 to 24 gpm Part# SKU Price FMC-HYD $ FMC-HYD-LM Pump Less motor $ Repair Kit Centrifugal Pump: (1) Mechanical seal #3, (1) Hydraulic motor O-ring (not shown), (1) 4 hole gasket #1 Part# SKU Price RK-FMC 3870 $42.99 Hydraulic Motor: All seals and O-rings Part# SKU Price RK-BAC-75-HYD-L 4007 $44.51 Common Repair Parts Casing gasket Qty. Part No. No. Fits Pump 1 1 BAC-4 All 1 BAC-4A O-ring All Driven shaft with tang slot 2 1 BAC-6-HYD-SS Stainless Steel Viton mechanical seal 1 BAC-7-V All 1 BAC-7-SC Silicone All Volute 1 1 4" x 1" 1 BAC-12 All Stainless steel hex nut 1 BACH-23-SS All Stainless steel lock washer 1 BAC-24-HYD-SS All Impeller key 1 BACH-25 All Impeller with keyway 1 BAC-26-HYD All with valox 9 1 BAC-26-HYD-CI All with cast iron External snap ring 2 BAC-32 All Spacer 1 BAC-32S All Internal snap ring 1 BAC-33 All Sealed ball bearing 7 BAC-37 All Slinger 1 BAC-54 All Hydraulic motor complete 1 BAC-75-HYD-204N FMC-HYD BAC-75-HYD-206N FMC-HYD BAC-75-HYD-210N FMC-HYD BAC-75-HYD-310N FMC-HYD L68

71 ACE Centrifugal Pump PUM PS Hydraulic Driven Hydraulic motor drive (for open or closed center systems) Max. flow: 100 GPM Max. pressure: 120 PSI Port size: 1½" NPT inlet, 1¼" NPT outlet Impeller: cast iron Housing: cast iron Hydraulic motor: gear type Hydraulic motor capacities: 7 GPM Viton mechanical seal 206 Motor Requires 7 GPM hydraulic fluid input Recommended for: John Deere type pressure compensating closed center systems Case IH type load sensing closed center systems Open center systems with capacities from 7 to 16 GPM * Note: Consult the Tractor Hydraulic System Pump selection guide for correct pump. FMC-150-HYD-206 1½" x 1¼" $ pump with motor FMC-150HYD-LM 1½" x 1¼" pump, Less motor $ Common Repair Parts Volute O-ring Qty. Part 1 No. No. Fits Pump 1 BAC All Driven shaft with tang slot 2 1 BAC-6-HYD-SS Stainless Steel Viton mechanical seal 1 BAC-7-V (Viton Seal) All BAC-7SC (Silicone Seal) Volute 1 1 2" x 1 1 4" 1 BAC All Stainless steel hex nut 1 BACH-23-SS All Stainless steel lock washer 1 BAC-24-HYD-SS All Impeller key 1 BACH-25 All LIQUID Repair Kit Centrifugal Pump: (1) Mechanical seal #3 Part# SKU Price RK-FMC $42.99 (1) Hydraulic motor O-ring (1) Volute O-ring #1 Hydraulic Motor: All seals and O-rings Part# SKU Price RK-BAC-75-HYD-L 4007 $44.51 Impeller with keyway 1 BAC All External snap ring 2 BAC-32 All Internal snap ring 1 BAC-33 All Sealed ball bearing 7 BAC-37 All Slinger 1 BAC-54 All Hydraulic Coupling 1 BAC-76-HYD-206 All Hydraulic motor complete 1 BAC-75-HYD-206 All L69

72 ACE Centrifugal Pumps LIQUID PTO Belt Driven Centrifugal Pump PTO belt driven centrifugal pumps were first introduced by Ace in 1964 and enabled the applicator to mount centrifugal pumps directly on 540 RPM and 1000 RPM tractor PTO shafts. The simple yet durable design of the PTOC pump has withstood the test of time while many attempts at imitation have come and gone. The key to the success of the Ace belt driven pumps has been the Spring Loaded Idler. The idler maintains proper belt tension which minimizes the load on the pump bearings. More importantly, the idler helps absorb the shock of PTO engagement that can destroy cog belts or gears. Part# SKU Price PTOC-600-QC $ PTOC SP $ Common Repair Parts Gasket, 4 Hole Qty. Part No. No. Fits Pump 1 1 BAC-4 All 5/8 Driven shaft, left hand thread 1 BAC-6 All 3 1 BAC-6-SS Stainless steel (optional) Mechanical Seal 1 BAC-7-V Viton Volute 1 1 4" x 1" 1 BAC-12 All Idler Arm Impeller 17 Poly-V-Belt 19 1 BAC-13 All 1 BAC-26 Valox, left hand 1 BAC-26-CI cast iron, left hand (opt.) 1 BAC-28-8M 8 groove (PTOC-600) 1 BAC-28-10M 10 groove (PTOC-1000) Obsolete Poly-V-Belt 1 BAC groove (PTOC-600) 1 BAC groove (PTOC-1000) Sealed Ball Bearing, BAC-10 Drive Shaft 2 BAC-31 All External Snap Ring 2 BAC-32 All 23 Spacer 1 BAC-32-S All 24 Sealed Ball Bearing, BAC-6 Drive Shaft 2 BAC-37 All 29 Slinger 1 BAC-54 All 45 Idler Bearing and Outer Roller Assembly 1 BAC-55 All 46 Heavy Duty Ace SPRA-COUPE Pump Heavy duty 204 Bearings for 66% better bearing load Ultra-Durable double bearing clutch Optional severe duty silicon carbide seal Part# SKU Price FMC-CW-150-MAG-DX $ PUM PS L70

73 ACE Flanged Pumps 150 Series High Performance Flanged Pump FEATURES: F model equipped with NPT ports and industry standard flanged connections. FS model constructed of 316 stainless steel with NPT ports and flanged connections SP model is self priming making it perfect for loading and also spraying applications. Provides higher pressure and greater volume for applications with large tanks and longer spray booms. The 206 motor requires 7 GPM maximum hydraulic fluid input and fits virtually all tractor hydraulic systems LIQUID Recommended for: Pressure compensating closed center systems Load sensing closed center systems Open center systems up to 16 GPM using internal needle valve bypass FMC-150F-HYD-206 1½" or 220 Flange Inlet $ ¼" or 200 Flange Outlet FMC-150FS-HYD-206 New Stainless Steel Pump $1, Ace 200 Series High Flow Centrifugal Pump FEATURES: Threaded model is 2" Inlet and 1½" outlet. Flanged Model is 300 flange suction and 220 flange outlet Ideal for spraying, large tank agitation and liquid transfer Available with 210, 304 & 310 series hydraulic motors PUM PS 210 Motor requires 10 GPM maximum hydraulic fluid input and is recommended for: Pressure Compensating closed center systems Load sensing closed center systems Open center systems up to 17 GPM using internal needle valve bypass 304 Motor requires 11 GPM maximum hydraulic fluid input and is recommended for: Pressure Compensating closed center systems Load sensing closed center systems Open center systems up to 20gpm using internal needle valve bypass 310 Motor requires 16 GPM maximum hydraulic fluid input and is recommended for large open center systems up to 24gpm using internal needle valve bypass Part# SKU Price FMC-200-HYD $ L71

74 Banjo Transfer Pumps LIQUID L72 Gas Driven-Cast Iron Viton seals Stainless steel shaft sleeve Part# Size Engine Price 200-PI6PRO 2" 6.5hp Briggs $ PIH5 2" 5.5hp Honda $ PIH13 3" 13hp Honda* $1, P11PRO 3" 11hp Briggs $ * electric start Gas Driven-2" Poly Wet Seal Pump This 2" Banjo Poly Pump and Engine Combination has a double seal contained in ethylene glycol reservoir. The pump end is separated from the engine and the pump is V shaped for quicker priming. Part# Description Price 200P6PROW 6.5hp Briggs Pro Engine $ PH5W 5.5hp, Honda $ Gas Driven-High Capacity 222 Series Pump More gallons per minute-higher pressure Cast Iron Pump with ceramic/viton seal Part# Description Price 222PI6PRO 2" Pump 6.5hp B&S PRO $ PIH6 2" Pump, 6.5hp Honda $ PIH5 2" Pump 5.5hp Honda $ Gas Driven-2" Manifold Poly Pump Lightweight Low maintenance Corrosion resistant Part# Description Price M220P6PRO 6.5 HP Briggs & Stratton $ Pro Series M220PH5 5.5hp Honda Engine $ LoveJoy Couplings Part# Description Price L095-3/4x11/8 ¾" x 1 1 /8" $55.26 L095S Spider $10.87 (Other sizes available) Gas Driven-Poly Pumps New design incorporates space between pump and engine for protection V-shaped for quicker priming Part# Size Engine Price 200-P3 2" 6hp LCT $ PH5 2" 5.5hp Honda $ P6PRO 3" 6.5hp Honda $ PH6 3" 6.5hp Honda $ Gas Driven-3" Poly Wet Seal Pump This 3 Banjo Poly Pump and Engine Combination has a double seal contained in ethylene glycol reservoir. The pump end is separated from the engine and the pump is V shaped for quicker priming. Part# Description Price 300P11PROW 11hp Briggs PRO $ Engine 300PH11W 11hp Honda $1, Gas Driven-Wet Seal Part# Size Engine Price 201-PI6PROW 2" 6.5hp Briggs $ PIH-5W 2" 5.5hp Honda $ PIH-13W 3" 11hp Honda* $1, * electric start Pump Engine Cover Prolongs engine life and ensures easy starts Protects engine from the outside elements Fits most engines up to 13 HP (without electric start) Molded in cup holders and tool tray UV stabilized poly construction Part# Price AVPC01 $76.64

75 Banjo Transfer Pumps Cast Iron Pedestal Pumps Part# Description Price 150-PBI 1½" Pump ¾" Shaft $ PBI 2" Pump ¾" Shaft $ PBI 2" High Capacity Pump ¾" $ PBI 3" Pump 1" Shaft $ Banjo Cast Iron Pump Only (For replacement of gas engine driven models) Part# Description Price 200-POI 2" Pump Only $ POI 2" High Capacity Pump Only $ POI 3" Pump Only $ LIQUID Banjo Hydraulic Motor Driven Cast Iron Self Priming Pumps Stainless steel shaft sleeve Carbon ceramic seal with viton rubber Available in 1½", 2" and 3" 1½" & 2" pumps with Greesen MGG2 Motors: 12hp motor Min: 4 gal, Max: 12 gal hydraulic fluid capacity 3" pump with Tyrone UM16 Motor: Min: 8gal, Max: 15 gal hydraulic fluid 21hp motor Open system Part# Description Price 200-PIHY 2" Pump with MGG2 Motor $ PIHY 3" Pump with UM16 Motor $1, Banjo Electric Motor Driven Cast Iron Self Priming Pumps Stainless steel shaft sleeve Available in 1½", 2" and 3" Carbon ceramic seal with viton rubber Part# Description Price 234PIE5 2" CI Pump, 5hp 3450 RPM 3ph $1, PIE51 2" CI Pump, 5hp 3450 RPM 1ph $1, PIE101 3" Pump 10hp 3450 RPM 1ph $2, Banjo Poly Pedestal Pumps Part# Description Price 150-PB 1½" Pump $ PB 2" Pump $ PB 3" Pump $ PBW 3" Pump Wet Seal $ Poly Pump Only Part# Description Price 200-PO 2" Pump Only $ L73

76 2" CI Pump Parts LIQUID 1½" and 2" Cast Iron Centrifugal Pump Self Priming Replacement Parts Item# Part# Description Flange - Outlet 2" Flange - Outlet 1½" Flange - Inlet 20 2' Flange - Inlet 20 1½" Adapter - Gas Engine * Sleeve - Drive ¾" * Impeller Hex Nut ½" * Plate - Wear Gasket EPDM Gasket & Flap EPDM * Gasket - Adapter Cap Screw Handle Item# Part# Description Clamp Assembly * Gasket - Wear Plate Pump Housing Nut - Acorn * Flat Head 82 C'SK 20 V10118 Lock Washer Bearing Only with Shaft Bearing Pedestal Assembly Cap Screw * Seal Assembly (Viton ) Stud 30 V10119 S.S. Hex Nut Not Shown Pump Repair Kit *Parts Included in Repair Kit L74

77 222 Series Pump Parts LIQUID Cast Iron Pump Repair Parts List For 222 Series Pumps Itm# Part# Description Qty. Per Pump A Bearing Pedestal 1 Assy * ½" Jam Nut " Pump Handle A 5 /16" - 24 x Impeller Bolt * O-Ring Prime/Drain Plug 2 7 V /16" Lockwasher Vane Impeller* Pump Slinger A HHCS 5 /16-21 x 1¾ VA* Impeller Bolt Gasket A Body O-Ring * Check Valve Volute A Rear Bracket A 3 /16" SW. x 5 /8" Key* 1 *Pump Repair Kits Itm# Part# Description Qty. Per Pump /16" Flat Washer O-Ring * O-Ring V Seal Assembly Pump Body Assy Flange Gasket Threaded Flange 2 N/S 15751* Bracket Shim As Req'd N/S Z-Rails (PR) 1 Pair N/S HHCS 5 /16" - 18 x 1¾" 4 Zinc PLTD N/S V /16" - 18 Hex Nut 4 N/S V /16" Lockwasher 4 N/S 15000* Repair Kit 1 N/S Seal Kit (same as repair kit 1 without impeller) N/S 15000V Repair Kit FKM (viton type) 1 N/S 15999V Seal Kit FKM (viton type) 1 NOTE: EPDM GASKETS, SEALS, AND O-RINGS ARE USED IN THE FOLLOWING ASSEMBLIES UNLESS OTHERWISE NOTED: 222PBI, 222PIHY, 222PI5, 222PIH5, 222P0I. Pumps equipped with FKM (viton type) also available L75

78 Poly Pump Parts LIQUID 1½" and 2" Polypropylene Pump Parts (For Pumps Manufactured Beginning September, 1996) Item# Description Qty. Per Pump Part# 1½" Part# 2" 2 Body Nuts SS 10 V07019 V Lock Washer SS 10 V07018 V Rear Bracket A 12703A 5 Seal Assembly* Rear Bracket Washer SS Screw Heads "O" Ring* Bracket Screws SS A 12715A 9 "O" Ring Segment * Body "O" Ring * A 12719A 11 5/3 Vane Impeller A Impeller Bit SS A 12765A 13 Impeller Bit Gasket * VA 12774VA 14 Impeller Hex Nut A 12775A 15 Volute A 12702A 16 Volute Screws SS Check Valve* Body Assembly A 12712A 19 Body Screws SS Prime/Drain Plug (Prime/Drain Plug) "O" Ring*+ 2 UV15163 UV Upper Volute Screw SS Impeller Key A 12902A 28 Slinger * "O" Ring (for Seal Assembly)* Repair Kits Pump Kit (marked with *) Pump Seal "O" Ring Kit (marked with +) Part# 12000A 12999A L76

79 CDS-John Blue Centrifugal Pumps LIQUID MADE IN USA Pumps for Gasoline Engines SP3220-BS 2" Self Priming $ SP3320-BS 3" Self Priming $ Your Authorized Distributor Pumps with Pedestal Mount SP3220P 2" Self Priming $ SP3320P 3" Self Priming $1, S3325P 3" Straight $1, Pumps Coupled to Gasoline Engines SP3220-G5H 2" Self Priming / 5.5hp Honda $1, SP3320-G13H 3" Self Priming / 13hp Honda $1, Pumps Coupled to Electric Motors SP3220-E5T1B 2" Self Priming / 5hp TEFC Motor / 1 phase $2, SP3220-E5T3B 2" Self Priming / 5hp TEFC Motor / 3 phase $1, SP3320-E10TB 3" Self Priming / 10hp TEFC Motor / 3 phase $2, SP3320-E10TB-1 3" Self Priming / 10hp TEFC Motor / 1 phase $2, L77

80 CDS-John Blue Piston Pumps LIQUID John Blue NGP New Generation Piston Pumps 1. Single Valve Cap One piece valve cap allows for easy check valve access without removing the hoses. Easy to service in the field. 2. Outboard Cylinder Plunger packing can be inspected or replaced in the field without removing hoses. 3. Main Shaft Seals The newly designed main shaft seals incorporate a dual that is enclosed in a grease cavity to flush out contamination, resulting in a longer life. 4. Check Valve Design A positive check o-ring seal offers enhanced priming and is more forgiving in handling debris, which ensures accuracy. 5. Universal Piston Rod Seals Three Stage Dynamic Design Primary wet end V packing, primary crankcase V packing and secondary crankcase o-ring seals work in unison to offer multiple stage protection between the wet end and crankcase. This reduces pump weepage while maximizing pump life. 6. Standard Main Shafts Standard single and double piston pump crankshafts are universal in the NGP line for modular upgrades such as clutches and ON-THE-GO variable rate. (Modules to be released soon.) NGP-6055 Single Piston 21 GPM rated flow 120 PSI rated pressure 550 RPM maximum 1½" inlet and 1" outlet NGP-7050 Single Piston 34 GPM rated flow 120 PSI rated pressure 450 RPM maximum 1½" inlet and 1" outlet SKU Price $1, (Gasket Kit ) SKU Price $2, Direct NEW! Hydraulic Drive for Piston Pumps Lower cost and more compact solution for variable rate piston pump drives User can supply their own SAE A 2-bolt motor or a hydraulic motor/pwm manifold kit is available form CDS-John Blue NGP-9055 Double Piston 68 GPM rated flow 120 PSI rated pressure 450 RPM maximum 2" inlet and 1½" outlet SKU Price $ SKU Price $2, L78

81 CDS-John Blue Injection Pumps CDS E-Z Meter pumps accurately add fertilizers, herbicides or pesticides through your existing irrigation system. All E-Z Meter pumps have earned a reputation for long, trouble free life and easy maintenance. CDS Pumps feature totally enclosed motors, sealed gearboxes, self-lubricating bearings, high corrosionresistant materials and rugged construction. Simplex Pumps CDS offers a choice of pumps that cover all practical injection rates /2 GPH, 5-30 GPH, or 200GPH handle the widest scope of material applications. Pumps can be powered by V single phase motors, V three phase motors or fuel efficient 3 or 4hp gasoline engines. E-Z Meter belt driven pumps have brackets that allow the pump to be run directly from an irrigation pump gear reducer. Drive 5-30 GPH SKU Price GPH SKU Price Belt $1, $1, LIQUID Single Phase $1, $1, Three Phase $1, $1, V $1, $2, Duplex Pumps Delivery Rate Single Phase Three Phase Belt Drive 0-7.5/ / / / / Pump calibration assembly is field adjustable with a wrench. Positive lock calibration visually indicates the precise flow injected. Wear and maintenance is reduced by the self lubricated rod end bearing. John Blue Check Valves HS ¼" MPTX ¼" FPT 6643 $73.80 CV-1310 ¼" NPT female inlet x 1792 $19.91 ½" male outlet CV-1310-BL ¼" NPT female inlet x ½" male outlet 2904 $32.26 Common Parts Description 5-30 GPH GPH Piston Cup Assy Poly Check Valve S.S. Check Valve Cylinder Tube Complete Cylinder Rod End Bearing Cylinder Rod Bush Calibration Scale Piston Rod Pivot Bushing Poly Manifold HS CV-1310 CV-1310-BL Stainless Injection Check Valve Assembly Poly Injection Check Valve Assembly Poly Injection Check Valve Assembly bleeder valve and reducer L79

82 CDS-John Blue Squeeze Pumps and Flow Dividers LIQUID John Blue Ground Driven Squeeze Pumps Heavy Cast Iron Frame will not flex on uneven ground Output does not vary from 5RPM to 125 RPM Round Hoses and spring loaded back plate for accuracy Positive shut-off when pump stops Hoses have memory shape for accurate rate Grease fittings on rollers allow dirt and fertilizer to be flushed out Low rate models 5 16" Hoses and 3-18 GPA High rate models ½" Hoses and 7-45 GPA Model #of Hoses Size Rate Discharge SKU Price L-6-C 6 ½" 7-45 ½" HOSE $ L-8-C 8 5 /16" /8" HOSE $ L-8-LC 8 ½" 7-45 ½" HOSE $ L-12-SC 12 5 /16" /8" HOSE $ L-12-C 12 ½" 7-45 ½" HOSE $ L-16-C 16 5 /16" /8" HOSE $ L-8-C ACCESORIES & PUMP DRIVES Squeeze pump mount and drive including: 2 cluster sprocket assemblies, L1485 Speed change drive with sprockets L4513 Complete sprocket package Miscellaneous Components & Parts SKU Price L1414 Sprocket Adapter - 7 /8" 2767 $30.75 L Sprocket Adapter 1" 2767 $30.75 L4414 Sprocket Retainer - 7 /8" 2267 $25.18 L1265 Set of Six ½" Squeeze Pump Hoses 3174 $35.28 LA1265 Set of Eight 5 /16" Squeeze Pump Hoses 4144 $ Individual ½" Squeeze Pump Hose 0529 $ Individual 5 /16" Squeeze Pump Hose 0518 $5.75 A3656A Nylon Split Bushing 0338 $3.76 L1452 Nylon Bushing 0111 $1.24 L1261 Black Plate Spring 0098 $1.09 Flow Dividers Numbered ports for ease of tracing lines Tapered inlets reduce turbulence resulting in smoother flow improving accuracy by up to 3 times Viton 0-rings are used for positive sealing for even hard to handle products Wrench flats for ease of installation 316 SS sleeve can be easily removed for cleaning in the field. Alignment pin ensures the sleeve will be replaced in exactly the same position every time. Spherical tip allows needle to open easier increasing accuracy at lower application rates. FD Outlet steel flow divider $ FD Outlet stainless steel flow divider $1, * Adjustable spring kits available L80

83 CDS-John Blue Squeeze Pumps CDS positive displacement metering pumps for liquid fertilizer. Ideal for planting, pre-plant, side dressing, cultivation and dual application. CDS single, double and combination squeeze pumps accurately meter your liquid fertilizer to each outlet for positive, accurate placement without manifolds, orifices or flow dividers. Minimum maintenance and downtime with lubricated for life sealed main shaft bearings. Durable, flex-resistant, special oval shaped squeeze tubes give longer life than round tubes. Pumps are available with 4 to 52 outlets in various configurations. Single pumps have one manifold and roller assembly. Double pumps have two manifolds and two roller assemblies. The number of outlets are easy to reduce. Simply remove one or more tubes as required and close the fittings with furnished poly plugs. The need for separate ground wheel drive is eliminated. Flow control valve provides accurate pump RPM from near zero to the maximum RPM of the pump. How to order the CDS Pump you need 1. Determine the number of outlets required (one for each application point). Example: if 18 outlets are required, the 20 outlet pump would be used. LIQUID 2. Determine tube size using this formula: Shank or outlet spacing(inches) x MPH x Desired application rate in GPA. 3. If result is 1501 or more, use 5 8" L model. If result is 1,000 to 1,500, use either 3 8" B model or 5 8" L model. If result is 1,000 or less, use 3 8" B model. CDS Squeeze pump maximum output at 100 RPM OPERATING GALLONS PER ACRE SPEED MPH 12" ROW 30" ROW 36" ROW B PUMP " HOSE L PUMP " HOSE Single Pumps Model Outlet Size SKU Price 8B " $ L " $ B " $1, L " $1, B " $1, L " $1, B " $1, B-1 = 3 8" SS Fitting L = 5 8" Plastic Fitting L-1 = 5 8" SS Fitting L81

84 CDS-John Blue Squeeze Pump Parts LIQUID Standard Squeeze Pump Parts List Item# Description Req 8B 8L 12B 12L 16B 20B 24B 1 Base Channel Frame Support Frame End Plate Outlet Ftg Rack Tube Tension Rack Push Rod Supply Manifold Manifold Clamp Squeeze Tube Inlet Fitting P Inlet Fitting SS Outlet Fitting P Outlet Fitting SS SS Screw Clamp Jack Shaft Standard Parts Pump# Roller Roller Assy. Mainshaft 8B L B L B L B B L82

85 Agri-Inject Stainless Mister Mist'r Injection of higher volumes of fertilizers and ag chemicals Size: ½" x 8" Stainless body, Stainless spring, Viton seal Pipe Size: 3"- 12" Volume Capacity: GPH ½" FNPT inlet, ¾" MNPT insertion Part# SKU Price $ Ultra Mister Mist'r & Bleeder Assemblies Injection of medium rates of fertilizers and ag chemicals Polypropylene body, Proprietary elasotmer spring seal Pipe Size: 6"- 12" Volume Capacity: GPH ½" MNPT inlet, ¾" MNPT insertion /8" JG Ultra Bleeder 5391 $ ½" Hose barb Ultra Bleeder 5391 $ Ultra Mister Mist'r 4107 $45.63 LIQUID Classic Mister Mist'r Injection of low/medium rates of fertilizers and ag chemicals Polypropylene body, Stainless spring, Viton seal Pipe Size: 6"- 12" Volume Capacity: GPH ¼" FNPT inlet, ¾" MNPT insertion Part# SKU Price $30.35 Fertigation System (MacRoy G55 Series) Mechanically actuated diaphragm pump Includes: switch, strainer, mister, pump, base, cord Range: GPH Part# Description Weight Price VAC 3ph 87lbs. $3, VDC 90lbs. $4, Classic Bleeder Valve Designed to work with the classic and mini Mister Mist'r Polypropylene body, Viton seals Connections: ¼" FNPT inlet, ¼" MNPT insertion Bleed Tube conn: 3 /16" o.d. x 1 /8" i.d. Part# SKU Price $13.79 Insectigator System (with Fig Pump) One person portable. Includes filter, calibration tube and more 33 44" H x 16" W x 33" L Includes: 2 switches and mixer Part# Description Size LBS. Price V DC 20 gal. 43 $3, V AC 3ph 20 gal. 46 $3, V AC 3ph 30 gal. 77 $3, L83

86 Inject-O-Meter Pumps LIQUID Inject-O-Meter Injection Pumps Built rugged for years of dependable service Operating pressures on certain models up to 300 PSI Small in size Installation kit with either lifted suction or gravity feed All installation kits include tubing, fittings and check valve Grease points to extend life of pump and components For agriculture, industrial and greenhouse uses Part# Description Piston 316 Stainless Steel Cylinder 316 Stainless Steel Packing (Model I-70) Neoprene (optional Teflon, Viton or mix) O-Rings Viton Valves 316 Stainless Steel Ball Checks 316 Stainless Steel Austenitic Fitting Polypropylene (optional 316 Stainless Steel) Gear Reducer 15 to 1 Drives Electric (1ph & 3ph), Belt, Honda Gasoline and 12V IOM GPH $1, Inject-O-Meter Model I-70 Piston Size Min. GPH Simple x Max GPH Simple x PSI Min GPH Duplex Max GPH Duplex.75" " " " " Inject-O-Meter Chemigation Systems Chemigation systems are simple in design and built tough. All systems come with pump for near perfect accuracy. Adjustable while running available with an additional purchase of variable speed drive. System can be designed with a variety of tanks and options including agitation. Available in both simplex or duplex styles for maximum versatility. Max 94 Check Valve ¾" 8874 $98.59 L84

87 Pumps & Speed Controls SHURflo Diaphragm Pumps Shurflo offers a variety of pumps for low pressure applications. Pumps are available in 12V and 115V. Adjustable demand switch automatically shuts off pump. Polypropylene Construction Viton Valves Santoprene Diaphragm Part# Volts GPM Description SKU Price SHURflo Pump $ Fan Cooled Motor $ ½" MPT $ ½" MPT $ ½" MPT $ /8" FPT $ /8" FPT $ For Foam Marker $ /8" NPT $85.57 FITTINGS Part# Size Description ½" FPT x ½" 90 HB-Wing Nut ½" FPT x 3 /8" 90 HB-Wing Nut ½" FPT x ¾" HB-Wing Nut ½" FPT x ¾" 90 HB-Wing Nut ½" F x ½" H Swivel Fitting LIQUID 12-Volt Speed Controller These 35 AMP John Blue controllers can be used with SHURflo, Aquatec or John Blue. The 12 volt pumps provide precise control over a wide RPM range. AKSC No Gauge $ AKSC With Gauge $ AKSC Digital Gauge $ Take all the performance and features of the time-tested 2088 series, double it, and the result is the high-flow Power Twin. SHURflo Power Twin Pumps Part# Volts GPM SKU Price $ FLOJET SHURflo 5000 Series 5.3 GPM free flow Available with male ½" NPS or female ½"NPT ports 12V diaphragm pump Driven by a 12-volt, SHURflow built sealed motor Self-priming capabilities, up to 8 feet Bypass versions set at 90 PSI, for applications where a demand switch is not desired Part# Desc. SKU Price D011 1/2 FPT $ D011 1/2 MPT $ D011 Bypass $ Series Santoprene Pumps Operating pressures up to 30 PSI Built in pressure switch automatically starts and stops pump instantaneously Can run pump dry without damage Plug-in ports for easy installation available with ½" or ¾" hose inserts Part# Volts GPM SKU Price A $ A $ $ L85

88 Diaphram Pumps LIQUID FloJet Diaphragm Pumps Duplex II Series Pumps Delivers flows up to 2.0 GPM Can run dry without damage Operating pressures up to 50 PSI Pressure switch automatically starts and stops pump Excellent self priming capability No metal contact with liquid being pumped 90 PSI maximum Item# A D21X005A 12V Santoprene $ D3131B5011A 12V Buna $ Aquatec Diaphragm Pump This five chamber pump is self priming and capable of being run dry. It includes a pressure switch, poly housing, Santoprene diaphram and stainless fasteners. Part# Volts GPM Description SKU Price E Aquatec pump-push in $ E1-94A Fat Boy pump with bypass $ E1-63B ½" NPT Fat Boy pump $ E77-M Aquatec pump ½" FPT $ FITTINGS Part# Size Desc. QBE 554 ½" Elbow QBE 556 ¾" Elbow QBS 554 ½" Straight QBS 556 ¾" Straight John Blue Diaphragm Pump Weatherproof Tested 4 Piston diaphragm for a smoother flow Quick Connect Ports System: The quick connect port systems means it s faster to install, requires fewer parts and connections while reducing the number of potential leak points The integral pressure switch is fully sealed Part# Part# GPM SKU Price AP1816W QC Ports $ AP1819W ½" Ports $ AP1219W Thd Pump $ QUICK CONNECT FITTINGS Part# Description AK1584W ½" Hose Barb AK1591W ½" Hose Barb Elbow AK1592W ¾" Hose Barb Elbow AK1593W ¾" Straight Barb L86

89 Sotera Herbicide & Diaphragm Pumps Sotera Systems ChemTraveller Now you can have pumping power and portability with this unique application of the Sotera Systems Series 400 dual diaphragm 12 volt or 110 volt workhorse. Never before have you been able to buy one pump that can provide so many applications. It can go anywhere and pump practically anything. Take it out in fields, around the plant or on the road, you ve got the most durable pump ever designed at your side. And when you are ready to pack it in, simply wrap the hose around the frame and go. It s all selfcontained for convenient use, quick access and compact storage! The Chemtraveller comes in both a compact 12 volt model on a low profile frame and a 110 volt model featuring a high profile tubular frame on heavy duty wheels. Both feature a digital meter and ball valve nozzle at the end of the hose for accurate, easy and safe chemical dispensing. The Chemtraveller can be fitted to any style mini bulk containers with 2", 4" and 6" openings. LIQUID SS435B ChemTraveller $1, SS465X713 ChemTraveler 110 Volt $1, Sotera Series 400 Diaphragm Pump Pump the toughest fluids and chemicals at up to 13gpm. The Fill-Rite 400 series diaphragm pump transfers all types of materials-from clear flowables to thick viscosity encapsulated products and suspensions-in all types of weather to make the job easier, faster and safer than ever before. SS415B Diaphragm Pump Only $ SS417B Pump w/buttress Quick $ Attach SS420 Diaphragm Pump w/ Hose $ Volt Everflo Pump 7.0 GPM max Poly pump housing and valve plate Viton valves Santoprene diaphragm 60 PSI (4.1 Bar) max Zinc plated steel fasteners Painted steel 3 motor shell Round-Up ready Self priming to 12 Feet Max fluid temp. 140 F Part# Desc. SKU Price EF GPM $22.79 Max. 40 PSI EF GPM $57.11 Max. 70 PSI EF7000 Threaded $ EF7000-QA-BOX Quick Connect $ EF7000-KIT Repair Kit $ Delavan Powerflo Pump Max. flow 7.0 GPM 5-chamber Diaphragm Bypass pump Viton valves, Santoprene diaphragm 12V DC electric motor Max. pressure 60 PSI Max. draw 25A Max. fluid temp. 140 F ½" FNPT ports Housings: nylon Stainless steel fasteners Item# Description SKU Price E Diaphragm Pump $ L87

90 Herbicide Meters LIQUID Tuthill 825 Digital Meter Easy to read display Low maintenance Five 1" ports to select from Uses two AAA batteries (Included) Stainless and poly body 2-20 GPM capacity Part# SKU Price $ Tuthill 850 Digital Meter Sotera positive displacement Nutating Disc meter Waterproof, corrosion-resistant 2-20gpm flow 1FNPT ports Up to 120 PSI max -10 F F temp. range Part# SKU Price $ GPI Model FM300H Electronic Meter Part# Flow Rate Working Pressure Power Requirements Description Thin fluids: 2-20 GPM Medium/Thick Fluids: GPM 50 PSI 9 Volt Alkaline or Lithium Battery Inlet: 1" Female (NPT Thread) Outlet: 1" Male (NPT Thread) Dimensions Overall: 6" x 4" x 3.3" Meter Body: 4" x 4" x 3.3" Weight 1.66 lbs. Part# SKU Price FM300H $ Reliable nutating disc measuring chamber. Field replaceable 9 volt battery for easy maintenance. Display rotatable in 90 increments. Scienco Model SEM-10 and SEM-10FT Electronic Met The seals are totally sealed & potted electronic package with Viton O-rings in flow chamber. The meter chamber is separated & sealed from electronics. The meter can be mounted at the pump for greater protection and durability or plumbed in-lin. Part# Construction Type Body Internal Wetted Parts Display Flow Flow Range Pipe Size Description Nutating Disc with LCD Readout Polypropylene Nylon Ryton LCD, 4-digit, ¾" numerals, floating decimal Tow-way, either port can be used for low inlet 2-30 gallons per minute 1" Male NPT, 1" Female NPT on SEM-10FT Part# SKU Price SEM $ SEM-10FT $ SEM-10 SEM-10FT Quantity Pricing Available L88

91 Scienco Pumps DD6 In-Tank Diaphragm Pump with Removable 12-Volt Drive Unit (Excellent for most herbicides including thick, viscous products) Part No. Description SKU Price DD6-Motor Motor only - for model DD-6 pump $ Powered by 12 volts D.C. Includes 20' battery cable, electrical hardware Part No. Description SKU Price DD6-Pump* Mounts directly into the mini-bulk container $ Flow rate is 9 U.S. GPM maximum Pumps low to high viscosity liquids with an internal recirculating feature for agitation capabilities Discharge port configuration features a check valve to prevent chemical container leakage Includes a vent, rain cover, mounting hardware and gasket LIQUID *This pump requires a 8¼" diameter flat surface with a 61 8" hole for tank mounting. DD6 Drive Unit Package Adapter plate to convert hole in tank for DD6 pump to adapt SS6 pump or other pumping units. Item# Description SKU Price DD6 DRIVE Drive Unit Package for DD6 Pump Kit Includes: 12V Motor with 20ft. Cable, EPDM Discharge Hose, Ball Vavle with Nozzle, SEM-10 Flow Meter, Aluminum Discharge elbow and quick $ DD6 Elbow Elbow to attach meter/ hose is available in 1" thick coupler or 1" threaded (FPT) versions. Includes O-ring, spacer, wave washer. KD-23-AC Quick Coupler Elbow 9996 $ KD Threaded ELbow 9134 $ EP-37 O-Ring 0879 $9.76 DD6M-100 O-Ring Thin 0184 $2.04 KD KD-23-AC Herbicide Hose Assembly 1X12EPDM 1" Hose 12ft. Long with 1" MPT Ends 2920 $ GPI Adjustable Pickup Tube 1997 $22.18 XTUBE-TE Threaded Pickup Tube 2178 $24.19 XTUBE-E Extend-a-Tube, EPDM 2178 $24.19 XTUBE-TE XTUBE-E X12EPDM L89

92 Scienco Pump Repair Parts DD6 & SS6 Motor Unit PH6 Pump LIQUID Parts List Qty. Description Part No. 4 Hex Head Screw x 1 2 BP-30 1 Armature DD6M-16 1 Front Motor Cap EP-01 1 Rear Motor Cap EP-02 1 Switch Cover EP-03 1 Junction Box Cover EP-04 1 Welded EP-05, EP-06 EP-06 ASSY x 7 8 Roundhead Screw EP Small Pattern Hex. Nut EP-10A x 3 8 Screw EP-11 1 Switch Assembly EP-13 ASSY 2 Hex indented x EP-14 1 Tube & Magnet EP-15 1 Bottom Brush Plate EP-17A 1 EP-17B & EP-17S Assembled Together EP-17ASSY 1 Brush w/blk. Lead Wire EP-18 1 Brush w/red Lead Wire EP-18R 2 Snap Ring # EP-19 2 Bearing #PS3KDD-FS50160 EP-20 1 Fish Paper EP-22 1 # Ring Terminal EP-23A 1 Polyester Spacer EP x 3 4 Hex Head Screw EP-25 Epoxy Filling EP x 3 8 Set Screw EP-28 3 Roll Pins 1 8 x 1 2 EP x 3 8 Fill Screw Green EP-88S 1 #10 Hi Collar Lock Washer EP-88W 1 On/Off Knob Black Nylon EP-GR-09 Item No. Part No. QTY Description 1 CP-47 1 ¼ - 20 x ¼ Set Screw 2 WP-01ASSY 1 Motor Drive Plate Assembly 3 EP x 3 8 RND HD/PAN HD PHL Screw 4 DD6P-07SS SS Nylon Insert Lock Nut 5 LF-03 EPDM 1 EPDM 1 16 Bottom Gasket 6 PH Volt Mamco Motor For PHP 7 PH-02 1 Aluminum Motor Mounting Plate 8 PH-03 7 #10 x 5 8 PHL SS Hi-Low Screw 9 PH-04 1 Polypropylene Motor Mousing 10 PH6 Kit 01 1 Nylon Pump Housing 11 PH-07 1 Molded Junction Box Cover 12 PH-08 1 Gaynor Micro Switch/# PH-09 1 Half Boot For Toggle Switch 14 PH-14 1 Strain Relieft Cord Bushing # PHA ' Cable Assy. For PH6 Pump 16 PH-13 6 Self-Tapping Screw 17 PHP-Kit-01 1 Pump Cartridge For PH6 18 SS6P-21 1 O-Ring #248 EPDM PHP-KIT-02 Gasket Kit Includes #5,#18 L90

93 Mini Bulk Herbicide Pumps CT6 Pumps - Transfer of Crop Protection Products The CT6 is a six-chamber diaphragm pump designed for chemical transfer applications. It is a self-priming pump with wetted parts resistant to many agricultural and industrial chemicals. The CT6 is used primarily to dispense fluids from Bulk or Mini-Bulk tanks, Intermediate Bulk Containers (IBCs), Drums, and for similar containers. The pump can be configured with a variety of brackets, dip tubes, flowmeters, fittings, hoses and valves to provide a complete pumping system. Closed Evac System Pumping System Part# SKU Price CT6-3E5BA $ (Pump only, 12V) CT6-3E5CA-004 Monsanto Sys. w/meter $ CT6-3E5CA-008 Closed Sys w/meter, BRKT, Horizontal Mount-1" FPT, $ LIQUID Caddy System CT6-3E5DA-000 w/meter, Hose and Nozzle $ CT6-3E5DA-002 No Meter, Includes Hose and Nozzle $ Medium duty for thin to medium liquids and flowables. BC6 Transfer Pump Kit for IBC This drive package includes the BC6 pump, DD6 Motor, discharge hose and hose end nozzle. For IBC Lids. Optional kit with meter is available. Part# SKU Price BC6 PKG-UNIT $ GPI M1100H 110 Volt Pump Only Light duty for thin liquids only. Lightweight, corrosion resistant aluminum housing. Pumping rate up to 12 gpm depending upon the fluid viscosity and temperature. Part# SKU Price M1100H $ GPI P200H 12 Volt Pump Only Lightweight, corrosion resistant housing. Pumping rate from 3.5 to 8 GPM, depending upon the viscosity and temperature of the fluid being transferred. Part# SKU Price P200H $ Tamper Evident Devices Part# Size SKU Price PS-97-BLUE Push Seal with Serial Number PS-500SS.014 OD x 500' Four Strand Wire CL " x 14" Cable with Seal & Serial 9334 $ (500') 0145 $1.61 CL EZ Lock Seal 24" 0188 $2.09 Pressure Test Kit Automatic Pressure Test Kit. Used to pressurize mini bulk tanks to look for leaks. Supply air pressure to the assembly and the kit will automatically set the tanks pressure. Part# SKU Price FB-MBT $ Part# Size SKU Price Micro Matic SS $ Valve Assembly L91

94 Dura Products & Mini Bulk Accessories Dura-Pump Easy Caddy The Frame assembly provides the ability to quickly attach the pump system to the frame of an IBC/cage tank. Can handle low & high viscosity liquids. LIQUID DPE-4015V Without Meter, 110V, Viton Seals $ DPEM-4312E Meter, 12V, EPDM Seals $ DPEM-4312V Meter, 12V, Viton Seals $ DPEM-4315V Meter, 110V, Viton Seals $ DPEM-4612NV Meter, 12V, Viton Seals for use with N-SERVE $1, Dura-Pump Quick Caddy The Frame assembly provides the ability to quickly attach the pump system to the frame of an IBC/cage tank. Can handle low & high viscosity liquids. Part# Desc. SKU Price DPQM-4312E Meter, 12V, EPDM Seals $ DPQM-4312V Meter, 12V, Viton Seals $ One Way Valve Options Part# Size SKU Price BC201A201B 2" Male Adapter x 3069 $ " Female Adapter Part# Size SKU Price VSFMTBC200 2" Male NPT x 3790 $ " Male Adapter 3" FP Flanged Poly Check Valve Part# SKU Price MCV $ " FP Threaded Poly Check Valve Part# SKU Price CV $ " Male NPT x 1" Female NPT Check Valve Part# SKU Price CV100MT 0923 $10.25 L92

95 Dura Products Easy Caddy DURA-ABS AUTO-BATCH SYSTEM Intuitive interface allows for the selection of manual or automatic operation with the flip of a switch. High-flow pump with up to 15GPM flow rate. Optimized for repeatable batching; returns to the last volume amount dispensed. 100% moisture sealed circuitry. Includes Dura-Meter with impact resistant Lexan faceplate. Available in 12 Volt or 110 Volt, and EPDM or Viton options. Features a 2 year warranty DPABS-4312E Meter, 12V, EPDM Seals $1, DPABS-4312V Meter, 12V, Viton Seals $1, DPABS-4315E Meter, 110V, EPDM Seals $1, DPABS-4315V Meter, 110V, Viton Seals $1, LIQUID Use multiple units to create an automated process for dispensing into an inductor cone OR use an individual unit for simple applications. Dura Meters This meter features a moisture-sealed construction so the electronic circuit is impervious to moisture. Dura-Pump & Motor Only This pump has an interanl bypass, is easily field repairable, has self priming capabilities and can be run dry without damage. Part# Desc. SKU Price DP-3000E Dura-Meter $ DP-3000V with Viton $ Part# SKU Price DP- 4012E $ also available in 100 volt EPDM or Viton Dura-Pump Cartridge Part# Desc. SKU Price DP-P4017A-V with O' ring 8665 $96.26 & gasket Dura-Pump For Monsanto Tank 12 Volt pump without the meter Part# Desc. SKU Price DPMTS-4012E EPDM $ DPMTS-4012V Viton $ L93

96 Banjo Ball Valves LIQUID Polypropylene Single Union Ball Valve (S)UV050-FP ½" Single Union Ball Valve 1120 $12.44 (S)UV075-FP ¾" Single Union Ball Valve 1120 $12.44 (S)UV100-FP 1" Single Union Ball Valve 1399 $15.55 (S)UV125-FP 1¼" Single Union Ball Valve 2883 $32.03 (S)UV150-FP 1½" Single Union Ball Valve 2863 $31.81 (S)UV200-FP 2" Single Union Ball Valve 2383 $27.95 Stubby Poly Bolted Ball Valve VSF200 2" FPT x 2" Male 2688 $31.53 Adapter Valve VSMT200 2" MPT x 2" FPT 2688 $31.53 VSFMT200 2" MPT x 2" Male Adapter Valve 2860 $33.55 Polypropylene Bolted Ball Valve V050 ½" Bolted Ball Valve Full Port 1722 $20.20 V075 ¾" Bolted Ball Valve Full Port 1722 $20.20 V100 1" Bolted Ball Valve Std. Port 1722 $20.20 V100-FP 1" Bolted Ball Valve Full Port 1899 $22.27 V125 1¼" Bolted Ball Valve Std. Port 1899 $22.27 V125-FP 1¼" Bolted Ball Valve Full Port 2441 $28.63 V150 1½" Bolted Ball Valve Full Port 2441 $28.63 V200 2" Bolted Ball Valve Std. Port 2441 $28.63 V204-FP 2" Bolted Ball Valve Full Port 3259 $38.23 V200-FP 2" Bolted Ball Valve Full Port 3438 $40.33 V300 3" Bolted Ball Valve Std. Port 5535 $64.92 V300-FP 3" Bolted Ball Valve Full Port 8216 $96.37 V400 4 Bolted Ball Valve Std. Port $ Manifold Ball Valve 4 and 6 Bolt Valves Part# Desc. SKU Price MV100CF 1" Flange 1899 $22.27 Ball Valve MV200CF 2" Flange 2688 $31.53 Ball Valve MV220CF 2" FP Flange 3582 $42.01 Ball Valve MV300 3" Flange 5881 $68.98 Ball Valve MV300CF 3" FP Flange Ball Valve 8524 $99.98 Ball Valve Full Port VFMT200FP 2" MPT x 2" 3998 $46.90 Male Adpt. L94 Manifold Poly Bolted Ball Valve VSMT200CF 2" MPT x 2" C-Flange 3131 $36.72 VSF200CF 2" Male Adapter x 2" 3418 $37.97 C-Flange FC200 Clamp 0642 $7.14 Locking Handle Stainless Steel hardware Locks in open and closed position Available for V200FP, V300, V300FP and V-400 Part# SKU Price VL $21.75

97 Banjo Ball Valves 3-Way Bottom Load Polypropylene Bolted Ball Valve Directional flow either right or left. Valve can be turned off to stop flow. V075BL ¾" 3-Way Bottom Load Full Port 2488 $29.18 V100BL 1" 3-Way Bottom Load Full Port 2488 $29.18 V125BL 1¼" 3-Way Bottom Load Full Port 4824 $56.59 V150BL 1½" 3-Way Bottom Load Full Port 4824 $56.59 V200BL 2" 3-Way Bottom Load Full Port 4908 $57.57 Polypropylene Bolted Nozzle Valve 45 Angled 10" long polypropylene fill spout. VA100 1" 45 Bolted 2012 $23.60 Valve Std. Port LIQUID 3-Way Side Load Poly Bolted Ball Valve Directional flow either right or left. Valve cannot be turned off to stop flow. V75SL ¾" 3-Way Side Load Full Port 2488 $29.18 V100SL 1" 3-Way Side Load Full Port 2488 $29.18 V125SL 1¼" 3-Way Side Load Full Port 4824 $56.59 V150SL 1½" 3-Way Side Load Full Port 5202 $57.80 V200SL 2" 3-Way Side Load Full Port 5292 $58.80 Polypropylene Single Union Nozzle Valve UVA100-FP 1" 45 Union Valve Full Port 1896 $21.07 Polypropylene Bolted Nozzle Valve 90 Angled end flange with 8" long polypropylene fill spout. VA150 1½" 90 Bolted Valve Full Port 2940 $34.48 VA200 2" 90 Bolted Valve Std. Port 2940 $34.48 VA200-FP 2" 90ª Bolted Valve Full Port 4397 $51.58 Banjo Poly Micro Valve LV025V ¼" Female NPT 0916 $10.17 LV025MTV ¼" Female x ¼" 0916 $10.17 Male NPT LV038V 5 /8" Female NPT 0916 $10.17 LV038MTV 3 /8" Female x 0916 $10.17 Male NPT LV050V ½" Female NPT 0811 $9.01 LV050MTV ½" Female x 0811 $9.01 Male NPT LVHB025V ¼" Hosebarb 0777 $8.63 LVHB038V 3 /8" Hosebarb 0777 $8.63 LVHB050V ½" Hosebarb 0828 $9.20 LVHB075V ¾" Hosebarb 0828 $9.20 L95

98 Ball & Butterfly Valves Carbon Steel Ball Valve - Jomar Latch lock handle may be locked in open or closed position. Two piece full port threaded connection with a solid ball construction. LIQUID Full Port Stainless Steel Ball Valves An economical, yet high quality, all stainless steel ball valve with locking handle. 1,000 PSI rating. Part# Size SKU Price ¼" 1397 $ ½" 1483 $ ¾" 1802 $ " 2751 $ ¼" 3984 $ ½" 6007 $ " 8278 $ " $ Not Approved for Anhydrous Ammonia Use Stainless Steel Ball Valve 100% full port stainless steel ball valve. Three piece four bolt design with locking handle. Rating to 1000WOG. Part# Size SKU Price ¾" 3691 $ " 4965 $ ¼" 7762 $ ½" $ " $ " $ Part# Size SKU Price ¼" 1469 $ /8" 1443 $ ½" 1642 $ ¾" 2373 $ ¼" 4882 $ ½" 6312 $ " 9055 $ Bray Butterfly Valves The Bray Valve has a special plastic epoxy coating to resist chemicals. Comes standard with stainless steel disc and EPDM seat. Part# Size SKU Price " 8656 $ " $ " $ " $ Keystone Butterfly Valves Ideal for building services and irrigation applications that require shut-off control. The valve has a moulded in seat and can be used in full vacuum service. Part# Size SKU Price " $ " $ " $ " $ Banjo Flow Meter These flow meters are ideal for loading out product to your sprayer or tender truck. 1" Flow Meter with pipe thread or flanged connections 2" Flow Meter with flanged connections Poly full flow body reduces restriction Lightweight, yet durable Easy to read display L96 Carbon Steel Ball Valve 100% full port carbon steel ball valve. Part# Size SKU Price " $ Part# Size SKU Price FM100 1" $ MFM100 1" $ MFM220 2" $ MFM300 3" $853.96

99 Butterfly Valves & Strainers Air Actuated Stainless Steel Butterfly - FNW 2"-10" Spring return option available in 2"-8" Air Operated Stainless Steel Ball Valves Full-Port design. Rated to 1000 PSI operating pressure. Pneumatic actuators require a minimum of 80 PSI air pressure for proper operation. LIQUID Valve Flanges Fairbank stocks a wide variety of flanges including cast iron, stainless steel, PVC and polypropylene. Size Cast Iron SKU Price 2" 2-125F 3464 $ " 3-125F 5220 $ " 4-125F 7035 $ " 6-125F 7167 $79.63 Poly SKU Price AF $15.73 AF $30.19 AF $63.77 SS SKU Price 2-150F-SS 3028 $ F-SS 5591 $ F-SS 5979 $66.43 Nyglass Strainers Nyglass offers a high quality strainer with stainless steel mesh screen at a very economical price. Glass reinforced nylon body has excellent chemical resistance (black) ¾" w/40 Mesh Screen 0940 $ CLEAR (clear) ¾" w/40 Mesh Screen 1564 $ M-1STR (black) 1" w/40 Mesh Screen 0925 $ M-1STR-CLR (clear) 1" w/40 Mesh Screen 1647 $18.30 HYG-5 EPDM Gasket 0378 $ MSCR 40 Mesh Screen 0380 $ MSCR 80 Mesh Screen 0449 $4.99 L97

100 Banjo "Y" Strainers LIQUID Polypropylene Y Strainers (75 PSI Max) LS ½" w/20 Mesh Screen 1859 $20.65 LS ½" w/40 Mesh Screen 1993 $22.14 LS ½" w/80 Mesh Screen 2192 $24.35 LS ¾" w/20 Mesh Screen 1690 $18.78 LS ¾" w/40 Mesh Screen 1690 $18.78 LS ¾" w/80 Mesh Screen 1859 $20.65 LS " w/20 Mesh Screen 1859 $20.65 LS " w/40 Mesh Screen 1690 $18.78 LS " w/80 Mesh Screen 1856 $20.62 Y Body and Cap 1 and 3 LS50B/C1 Fits 1 2" Strainers LS75B/C1 Fits 3 4" Strainers LS100B/C1 Fits 1" Strainers LS125B/C1 Fits 1 1 4" Strainers LS150B/C Fits 1 1 2" Strainers LS200B/C Fits 2" Strainers Cap Gasket LS75G Fits 1 2" and 3 4" Strainers LS100G Fits 1" and 1 1 4" 2 Strainers LS150G Sq. Gasket fits 1 1 2" and 2" (New Style) LS200G O-Ring fits 1 1 2" and 2" (Old Style) LS ¼" w/20 Mesh Screen 1859 $20.65 LS ¼" w/40 Mesh Screen 1859 $20.65 LS ¼" w/80 Mesh Screen 2042 $22.69 End Cap LS75-C1 LS100-C1 3 LS150-C LS200-C Fits 1 2" and 3 4" Strainers Fits 1" and 1 1 4" Strainers Fits 1-1/2" and 2" Strainers (New Style) Fits 1-1/2" and 2" Strainers (Old Style) (150 PSI Max) LS ½" w/6 Mesh Screen 4321 $48.01 LS ½" w/12 Mesh Screen 3719 $41.32 LS ½" w/20 Mesh Screen 3719 $41.32 LS ½" w/30 Mesh Screen 4091 $45.45 LS ½" w/50 Mesh Screen 3719 $41.32 LS ½" w/80 Mesh Screen 4091 $45.45 LS " w/6 Mesh Screen 4091 $45.45 LS " Y w/12 Mesh Screen 3719 $41.32 LS " Y w/20 Mesh Screen 3719 $41.32 LS " Y w/30 Mesh Screen 3719 $41.32 LS " Y w/50 Mesh Screen 3719 $41.32 LS " Y w/80 Mesh Screen 3719 $41.32 Screen LS-720 LS-740 LS-780 LS-120 LS-140 LS LS-206 LS-212 LS-220 LS-230 LS-250 LS-280 Clean out plug Fits all sizes O-Ring for clean out plug UV15163 Fits all sizes 20 Mesh (fits 1 2" and 3 4" Strainers) 40 Mesh (fits 1 2" and 3 4" Strainers) 80 Mesh (fits 1 2" and 3 4" Strainers) 20 Mesh (fits 1" and 1 1 4" Strainers) 40 Mesh (fits 1" and Strainers) 80 Mesh (fits 1" and Strainers) 6 Mesh (fits 1 1 2" and 2" Strainers) 12 Mesh (fits 1 1 2" and 2" Strainers) 20 Mesh (fits 1 1 2" and 2" Strainers) 30 Mesh (fits 1 1 2" and 2" Strainers) 50 Mesh (fits 1 1 2" and 2" Strainers) 80 Mesh (fits 1 1 2" and 2" Strainers) 5 6 L98

101 Banjo "T" Strainers Polypropylene T Strainers 150 P.S.I Max. LST ¾" w/16 Mesh Screen 1733 $19.26 LST ¾" w/30 Mesh Screen 1733 $19.26 LST ¾" w/50 Mesh Screen 1733 $19.26 LST ¾" w/80 Mesh Screen 1733 $19.26 LST ¾" w/100 Mesh Screen 1733 $19.26 LST " w/16 Mesh Screen 1733 $19.26 LST " w/30 Mesh Screen 1733 $19.26 LST " w/50 Mesh Screen 1733 $19.26 LST " w/80 Mesh Screen 1733 $19.26 LST " w/100 Mesh Screen 1733 $19.26 LST ¼" w/16 Mesh Screen 3453 $38.36 LST ¼" w/30 Mesh Screen 3453 $38.36 LST ¼" w/50 Mesh Screen 3453 $38.36 LST ¼" w/80 Mesh Screen 3453 $38.36 LST ¼" w/100 Mesh Screen 3453 $38.36 LST ½" w/16 Mesh Screen 3453 $38.36 LST ½" w/30 Mesh Screen 3453 $38.36 LST ½" w/50 Mesh Screen 3453 $38.36 LST ½" w/80 Mesh Screen 3453 $38.36 LST ½" w/100 Mesh Screen 3453 $38.36 T Strainer Head & Bowl LST75-HB Fits 3 4" LST100-HB Fits 1" 1 LST125-HB Fits 1 1 4" LST150-HB Fits 1 1 2" T Strainer Head LST75-H Fits 3 4" LST100-H Fits 1" 2 LST125-H Fits 1 1 4" LST150-H Fits 1 1 2" T Strainer Bowl LST100-B Fits 3 4" and 1" 3 LST125-B Fits 1 1 4" LST150-B Fits 1 1 2" T Strainer Bowl Gasket LST100-G Fits 3 4" and 1 4 LST150-G Fits 1 1 4" and 1 1 2" LIQUID Replacement Parts LSTM050G EPDM Gasket LST Mesh Screen LST Mesh Screen LST Mesh Screen LST Mesh Screen LST050B Black Bowl Polypropylene Mini T Strainers 150 P.S.I Max. LSTM ½" w/50 Mesh Screen 1292 $14.35 LSTM ¾" w/30 Mesh Screen 1292 $14.35 LSTM ¾" w/50 Mesh Screen 1292 $14.35 T Strainer Screens LST Mesh, Fits 3 4" and 1" LST Mesh, Fits 3 4" and 1" LST Mesh, Fits 3 4" and 1" LST Mesh, Fits 3 4" and 1" 5 LST Mesh, Fits 3 4" and 1" LST Mesh, Fits 1 1 4" and 1 1 2" LST Mesh, Fits 1 1 4" and 1 1 2" LST Mesh, Fits 1 1 4" and 1 1 2" LST Mesh, Fits 1 1 4" and 1 1 2" LST Mesh, Fits 1 1 4" and 1 1 2" Clean out plug Fits 3 4" and 1" 6 LSQ200-PL Fits 1 1 4" and 1 1 2" Clean out plug O-Ring Fits 3 4" and 1" 7 LSQ200-R Fits 1 1 4" and 1 1 2" L99

102 Banjo "Y" Strainers LIQUID LSQ Polypropylene Strainers 50 P.S.I Max. LSQ ½" w/6 Mesh Screen 5207 $57.85 LSQ ½" w/12 Mesh Screen 5910 $65.66 LSQ ½" w/20 Mesh Screen 5910 $65.66 LSQ ½" w/30 Mesh Screen 5910 $65.66 LSQ ½" w/50 Mesh Screen 5910 $65.66 LSQ ½" w/80 Mesh Screen 5910 $65.66 LSQ " w/6 Mesh Screen 5910 $65.66 LSQ " w/12 Mesh Screen 5910 $65.66 LSQ " w/20 Mesh Screen 5910 $65.66 LSQ " w/30 Mesh Screen 5910 $65.66 LSQ " w/50 Mesh Screen 5910 $65.66 LSQ " w/80 Mesh Screen 5910 $65.66 LSQ Strainers Repair Parts Body and Cap Part No. Description 1 LSQ150-B/C 1 1 2" LSQ Body and Cap and LSQ200-B/C 2" LSQ Body and Cap 6 Cap Gasket 2 LSQ200-G Fits 1 1 2" and 2" Strainer, EPDM LSQ200-G Fits 1 1 2" and 2" Strainer, Viton Clean Out Plug 3 PLO75S Fits 1 1 2" and 2" Strainer Cam Arm Pin and Ring 4 300H Stainless Steel Screen LS206 6 Mesh Fits 1 1 2" and 2" Strainer LS Mesh Fits 1 1 2" and 2" Strainer 5 LS Mesh Fits 1 1 2" and 2" Strainer LS Mesh Fits 1 1 2" and 2" Strainer LS Mesh Fits 1 1 2" and 2" Strainer LS Mesh Fits 1 1 2" and 2" Strainer Cap 6 LSQ200-C Fits 1 1 2" and 2" Strainer O-Ring For Clean Out Plug 7 LSQ200-R Fits 1 1 2" and 2" Strainer, EPDM LSQ200-RV Fits 1 1 2" and 2" Strainer, Viton L100

103 2" SS/Poly "T" Strainers LIQUID Polypropylene Bowl/SS Head Combo 2" T Strainers Part# Screen Size SKU Price LST200-4SS 4 Mesh Screen $ LST200-6SS 6 Mesh Screen $ LST200-10SS 10 Mesh Screen $ LST200-16SS 16 Mesh Screen $ LST200-30SS 30 Mesh Screen $ LST200-50SS 50 Mesh Screen $ LST200-80SS 80 Mesh Screen $ LST SS 100 Mesh Screen $ " T Strainers Repair Parts Part No. Description Poly Bowl and 316 SS Head LST200-HBSS T Strainer Bowl and Head Head LST200-HSS Bowl LST200-B Bowl Gasket LST200-GV Screen LST204SS LST206SS LST208SS LST210SS LST216SS LST230SS LST250SS LST280SS LST2100SS T Strainer 316 SS Head T Strainer Poly Bowl Viton 4 Mesh 6 Mesh 8 Mesh 10 Mesh 16 Mesh 30 Mesh 50 Mesh 80 Mesh 100 Mesh 6 Clean Out Plug PL075S Clean Out Plug 7 O-Ring For Clean Out Plug LSQ200-R EPDM LSQ200-RV Viton L101

104 Banjo 3" "Y" Strainer LIQUID 3" Polypropylene Y Strainer High Volume Reinforced stainless steel screen ½" drain plug in bottom of cap Lightweight-high volume Constructed of glass filled polypropylene Stainless steel T-handle clamp 50 PSI maximum Part# Screen Size SKU Price LSM Mesh $ LSM Mesh $ LSM Mesh $ LSM Mesh $ LSM Mesh $ Replacement Parts Part# Description LS-300G1 EPDM Gasket LS-300C2 End Cap LS304 4 Mesh Screen LS308 8 Mesh Screen LS Mesh Screen LS Mesh Screen LS Mesh Screen Clean Out Plug Cleat Out Plug O-ring 3" Stainless Steel Y Strainer 200 PSI max Clean out plug LSS300BC 3" S.S. Body Only $ LSS308 8 Mesh SS Screen $58.47 LSS Mesh SS Screen $58.47 LSS Mesh SS Screen $58.47 LSS Mesh SS Screen $58.47 LSS Mesh SS Screen $58.47 LSS300G Replacement Cap Gasket $5.77 LSS300C Replacement Cap $ LSS300H Replacement Clamp $49.88 L102

105 Banjo Cam Lever Couplings Male Adapter Polyproplyene Cam Lever Type A 75A-1/4 ¾" x ¼" FPT 0293 $ A-1/2 ¾" x ½" FPT 0293 $ A-3/4 ¾" x ¾" FPT 0245 $ A 1" x 1" FPT 0245 $ A 1¼" x 1¼" FPT 0245 $ /125A 1½" x 1¼" FPT 0393 $ A 1½" x 1½" FPT 0277 $ A 2" x 2" FPT 0328 $ A 3" x 3" FPT 0791 $ A 4" x 4" FPT 1447 $16.08 Female Hose Shank Polypropylene Cam Lever Type "C" 50C ½" Hose Shank 0659 $ C ¾" Hose Shank 0559 $ C 1" Hose Shank 0642 $ C 1¼" Hose Shank 0642 $ /125C 1½" x 1¼" Hose Shank 1332 $ C 1½" Hose Shank 0752 $ C 2" Hose Shank 0917 $ C 3" Hose Shank 1340 $ C 3" Hose Shank (with 3 cam arms) 1976 $ C 4" Hose Shank 3053 $32.87 LIQUID Female Cam Lock with Male Pipe Thread Polyproplyene Cam Lever Type B 75B-1/2 ¾" w/ ½" MPT 0671 $ B-3/4 ¾" w/ ¾" MPT 0559 $ B 1" w/ 1" MPT 0642 $ B 1¼" w/ 1¼" MPT 0642 $ /125B 1½" w/ 1¼" MPT 1066 $ B 1½" w/ 1½" MPT 0752 $ B 2" w/ 2" MPT Extended 0917 $ B 3" w/ 3" MPT 1540 $ B 3" w/ 3" MPT Extended 1976 $ B 4" w/ 4" MPT 3664 $40.70 Female Cam Lock with Female Pipe Thread Polypropylene Cam Lever Type "D" 050D ½" x ½" FPT 0659 $ D ¾" x ¾" FPT 0559 $ D 1" x 1" FPT 0642 $ D 1¼" x 1¼" FPT 0642 $ /125D 1½" x 1¼" FPT 1066 $ D 1½" x 1½" FPT 0752 $ D 2" x 2" FPT 0917 $ D 3" x 3" FPT 1540 $ D 4" x 4" FPT 3053 $33.92 L103

106 Banjo Cam Lever Couplings LIQUID Safety Bump Alternative choice to traditional cam & groove caps & plugs. Provides a comfortable handle for the driver's hand and a "bump" that extends beyond the hose fittings and ears, protecting them from damage. 20SBM 2" Pull Plug 1746 $ SBM 3" Pull Plug 2084 $23.16 Banjo Coupling Parts Arms, Pins & Rings Part# Description 75H ¾" 100H 1" & 1¼" 200H 1½" & 2" 300H 3" 400H 4" Polypropylene Cam Lever Type CAP 75CAP Fits ½" & ¾" Cap 0559 $ CAP 1" Cap 0616 $ CAP 1½" Cap 0752 $ CAP 2" Cap 0917 $ CAP 3" Cap 1540 $ CAP 4" Cap 2227 $24.74 Male Cam Lock Plug Polyproplyene Cam Lever Type PL 75PL Fits ½" & ¾" Plug 0265 $ PL 1" Plug 0255 $ PL 1½" Plug 0340 $ PL 2" Plug 0383 $ PL 3" Plug 0804 $ PL 4" Plug 1137 $12.63 Male Cam Lock 90º Elbow with Female Pipe Thread Polypropylene Cam Lever Type A A-90 1½" 90 Male Adapter 0525 $ A-90 2" 90 Male Adapter 0599 $6.66 Male Cam with Hose Shank Polyproplyene Cam Lever Type E 050E ½" Hose Shank 0312 $ E ¾" Hose Shank 0265 $ E 1" Hose Shank 0293 $ E 1¼" Hose Shank 0293 $ /125E 1½" x 1¼" Hose Shank 0416 $ E 1½" Hose Shank 0295 $ E 2" Hose Shank 0386 $ E 3" Hose Shank 1012 $ E 4" Hose Shank 1447 $16.08 Male Cam X Male Thread Polypropylene Cam Lever Type F 050F ½" Male Thread 0312 $ F ¾" Male Thread 0265 $ F 1" Male Thread 0293 $ F 1¼" Male Thread 0293 $ /125F 1½" x 1¼" Male Thread 0353 $ F 1½" Male Thread 0295 $ F 2" Male Thread 0386 $ F 3" Male Thread 1012 $ F 4" Male Thread 1447 $16.08 L104

107 Banjo Cam Lever Couplings Polypropylene Cam Lever Type C 90º 150C-90 1½" 90 Hose Shank 1083 $ C-90 2" 90 Hose Shank 1118 $12.42 Polypropylene Switch-A-Roos Male 75A-14-SA ¼" FPT Self Aligning 0293 $ A-38-SA 3 8" FPT Self Aligning 0245 $ A-12-SA ½" FPT Self Aligning 0245 $ A-34-SA ¾" FPT Self Aligning 0245 $ A-14 ¼" FPT 0236 $ A " FPT 0236 $ A-12 ½" FPT 0236 $ A-34 ¾" FPT 0236 $2.72 LIQUID Polypropylene Cam Lever Type D 90º 150D-90 1½" 90 x FPT 1083 $ D-90 2" 90 x FPT 1118 $12.42 Polypropylene Switch-A-Roos Female 75B-12 Female Coupler ½" MPT 0671 $ B-34 Female Coupler ¾" MPT 0559 $6.21 Polypropylene Cam Lever Type F 90º 150F-90 1½" 90 x MPT 0629 $ F-90 2" 90 x MPT 0563 $6.26 Banjo Reducer Coupling Adapts 3" Male adapter down to 2" male adapter 303B200A 3" Female Coupler w/ 3" Arms x 2" Male Adapter 3244 $36.04 Gaskets and Shims Size Standard Gasket SKU Price ¾" 75G " 100G ½" 150G " 200G " 300G " 400G 0194 $2.15 X-Thick Gasket SKU Price 75GXT GXT GXT 0100 $ GXT 0128 $ GXT 0170 $ GXT 0233 $2.59 Shim SKU Price 75SG SG SG SG SG SG 0113 $1.26 L105

108 Banjo Metal Cam Lever Couplings If you need a metal cam lock coupling, we stock both hard coated aluminum as well as stainless steel. All couplings have stainless steel cam arms for durability and leak free operation. LIQUID Style A Male Adapter Hard Coated Aluminum Stainless Steel Size Alum. SKU Price SS SKU Price ¾" 34AHC 0967 $ ASS $ ½" 15AHC 1675 $ ASS $ " 20AHC 1638 $ ASS $ " 30AHC 2791 $ ASS $ " 40AHC 6094 $ ASS $ Style D Coupling Hard Coated Aluminum Stainless Steel Alum. SKU Price SS SKU Price 75DHC 1883 $ DSS 4839 $ DHC 2886 $ DSS 7707 $ DHC 3446 $ DSS 8014 $ DHC 5188 $ DSS $ DHC 7776 $ DSS $ Style B Female CPLG Hard Coated Aluminum Stainless Steel Size Alum. SKU Price SS SKU Price ¾" 075BHC 1803 $ BSS 4793 $ ½" 15BHC 3079 $ BSS 6634 $ " 20BHC 3459 $ BSS 8619 $ " 30BHC 5214 $ BSS $ " 40BHC 8013 $ BSS $ Style E Adapter Hard Coated Aluminum Stainless Steel Alum. SKU Price SS SKU Price 34EHC 1150 $ ESS 3878 $ EHC 1921 $ ESS 3984 $ EHC 2170 $ ESS 4396 $ EHC 4084 $ ESS 8753 $ EHC 7042 $ ESS $ Style C Female CPLG Hard Coated Aluminum Stainless Steel Size Alum. SKU Price SS SKU Price ¾" 075CHC 1871 $ CSS 5478 $ ½" 15CHC 2737 $ CSS 5763 $ " 20CHC 3296 $ CSS 7764 $ " 30CHC 5182 $ CSS $ " 40CHC 7376 $ CSS $ Style F Adapter Hard Coated Aluminum Stainless Steel Alum. SKU Price SS SKU Price 75FHC 1125 $ FSS 3529 $ FHC 2151 $ FSS 6055 $ FHC 2465 $ FSS 6053 $ FHC 3847 $ FSS $ FHC 7062 $ FSS $ Dust Cap Hard Coated Aluminum Stainless Steel Size Alum. SKU Price SS SKU Price ¾" 34VHC 1654 $ CAP/SS 4644 $ ½" 15VHC 2597 $ CAP/SS 6202 $ " 20VHC 2644 $ CAP/SS 7858 $ " 30VHC 3884 $ CAP/SS 9758 $ " 40VHC 6017 $ CAP/SS $ Dust Plug Hard Coated Aluminum Stainless Steel Alum. SKU Price SS SKU Price 75WHC 1050 $ PL/SS 3122 $ WHC 1775 $ PL/SS 3423 $ WHC 2080 $ PL/SS 4003 $ WHC 2874 $ PL/SS 8747 $ WHC 3912 $ PL/SS $ L106

109 Banjo Pipe Fittings Polypropylene Pipe Plug Part# Size SKU Price PLUG-050 1" x ¾" 0160 $1.78 PLUG-75 1½" x 1" 0160 $1.78 PLUG-100 1½" x 1¼" 0160 $1.78 PLUG-125 2" x 1" 0160 $1.78 PLUG-150 2" x 1¼" 0319 $3.54 PLUG-200 2" x 1½" 0212 $2.35 PLUG-300 3" x 2" 1005 $11.17 Polypropylene Pipe Reducer Coupling Part# Size SKU Price RC " x ¾" 0342 $3.80 RC ½" x 1" 0579 $6.43 RC ½" x 1¼" 0579 $6.43 RC " x 1" 0513 $5.70 RC " x 1¼" 0616 $6.85 RC " x 1½" 0513 $5.70 RC " x 2" 1823 $20.26 LIQUID Polypropylene Pipe Coupling Part# Size SKU Price CPLG " Coupling 0271 $3.02 CPLG-050 ½" Coupling 0230 $2.56 CPLG-075 ¾" Coupling 0230 $2.56 CPLG-100 1" Coupling 0219 $2.43 CPLG-125 1¼" Coupling 0353 $3.92 CPLG-150 1½" Coupling 0491 $5.45 CPLG-200 2" Coupling 0559 $6.21 CPLG-300 3" Coupling 1582 $17.57 Polypropylene Reducer Nipple Part# Size SKU Price RN ½" x 3 8" 0135 $1.50 RN ¾" x ½" 0123 $1.37 RN " x ½" 0159 $1.76 RN " x ¾" 0144 $1.60 RN ¼" x ¾" 0166 $1.84 RN ¼" x 1" 0150 $1.67 RN ½" x 1" 0179 $1.99 RN ½" x 1¼" 0266 $2.96 RN " x 1¼" 0258 $2.87 RN " x 1½" 0222 $2.46 RN " x 2" 0609 $6.77 Banjo Spool Adapters Male reducing adapters Part# Size SKU Price 200FF 300F200F 300FF 2" Male Adapter x 2" Male Adapter 3" Male Adapter x 2" Male Adapter 3" Male Adapter x 3" Male Adapter 1189 $ $ $31.71 Polypropylene Swivels Part# Size SKU Price SW100 1" MPT Poly Swivel 0899 $9.98 SW150 1½" MPT Poly Swivel 1099 $12.21 SW200 2" MPT Poly Swivel 1045 $11.61 SW220 2" FP Mx2" F Swivel 2052 $22.80 L107

110 Banjo Pipe Fittings LIQUID L108 Threaded Polypropylene Cross Part# Size SKU Price CR075 ¾" Female Thread 1024 $11.38 CR100 1" Female Thread 1024 $11.38 CR125 1¼" Female Thread 1527 $16.97 CR150 1½" Female Thread 1527 $16.97 CR200 2" Female Thread 1559 $17.32 Polypropylene Street Elbow 90º Part# Size SKU Price SL " $2.16 SL ½" $1.95 SL ¾" $2.08 SL " $2.48 SL ¼" $3.40 SL ½" $4.81 SL " $5.72 SL " $29.11 Polypropylene Street Elbow 45º Part# Size SKU Price SL ¾" $4.04 SL " $5.42 SL ¼" $6.72 SL ½" $7.16 SL " $7.72 SL " $31.98 Polypropylene Pipe Cap Part# Size SKU Price Cap-075 ¾" Poly Pipe Cap 0309 $3.43 Cap-100 1" Poly Pipe Cap 0257 $2.86 Cap-150 1½" Poly Pipe Cap 0438 $4.86 Cap-200 2" Poly Pipe Cap 0508 $5.64 Cap-300 3" Poly Pipe Cap 1819 $20.21 Polypropylene Threaded Pipe Tee Part# Size SKU Price TEE-038 Polypropylene 45º Elbow EL " Tee 0263 $2.92 TEE-050 ½" Tee 0196 $2.18 TEE-075 ¾" Tee 0209 $2.32 TEE-100 1" Tee 0302 $3.35 TEG-100 1" W ¼" Port 1197 $13.30 TEE-125 1¼" Tee 0418 $4.64 TEE-150 1½" Tee 0499 $5.55 TEE-200 2" Tee 0622 $6.91 TEE-300 3" Tee 2966 $32.95 Polypropylene Pipe Elbow 90º Part# Size SKU Price EL ½" $2.24 EL ¾" $2.02 EL " $2.38 EL ¼" $3.58 EL ½" $5.61 EL " $5.55 EL " $ " Poly Pipe Elbow $9.08

111 Banjo Pipe Fittings Polypropylene Reducer Bushing Part# Size SKU Price RB " x ¼" 0177 $1.97 RB ½" x ¼" 0126 $1.40 RB ½" x 3 8" 0150 $1.67 RB ¾" x 1 8" 0150 $1.67 RB ¾" x ¼" 0150 $1.67 RB ¾" x 3 8" 0150 $1.67 RB ¾" x ½" 0150 $1.67 RB " x ¼" 0160 $1.78 RB " x ½" 0160 $1.78 RB " x ¾" 0160 $1.78 RB ¼" x ¾" 0160 $1.78 RB ¼" x 1" 0160 $1.78 RB ½" x ¾" 0265 $2.94 RB ½" x 1" 0265 $2.94 RB ½" x 1¼" 0265 $2.94 RB " x ¾" 0192 $2.13 RB " x 1" 0192 $2.13 RB " x 1¼" 0192 $2.13 RB " x 1½" 0192 $2.13 RB " x 1½" 1131 $12.57 RB " x 2" 0801 $8.90 RB " x 3" 1489 $16.54 Polypropylene Nipple Part# Size SKU Price NIP-038-SH 3 8" x Short 0100 $1.11 NIP-050-SH ½" x Short 0096 $1.06 NIP ½" x 3" 0212 $2.36 NIP-075-SH ¾" x Short NIP ¾" x 4" 0189 $2.10 NIP ¾" x 6" 0220 $2.45 NIP-100-SH 1" x Short 0093 $1.03 NIP " x 4" 0200 $2.22 NIP " x 6" 0249 $2.76 NIP-125-SH 1¼" x Short 0140 $1.56 NIP ¼" x 4" 0249 $2.76 NIP ¼" x 6" 0282 $3.13 NIP-150-SH 1½" x Short 0173 $1.92 NIP ½" x 3" 0319 $3.54 NIP ½" x 4" 0531 $5.89 NIP ½" x 6" 0624 $6.94 NIP-200-SH 2" x Short 0196 $2.18 NIP " x 4" 0412 $4.58 NIP " x 6" 0481 $5.34 NIP-300-SH 3" x Short" 0612 $6.80 NIP " x 4" 0920 $10.22 NIP " x 6" 1187 $13.19 LIQUID Rectorseal #21 Rectorseal #21. Recommended by Banjo for use with their poly valves and fittings. RectorSeal No. 21 pipe thread sealant is a black, soft-set, multipurpose sealant created for applications where a black sealant is preferred. Size SKU Price ½ pt 1263 $14.03 Rectorseal Tru-Blu Tru-Blu Liquid Teflon Sealant with PTFE is a fast-dry, flexible set thread sealant designed for high vibration environments. PTFE has been added to enhance thread lubrication during assembly and break out ¾ oz Tube Tru-Blu 0275 $ ¼ pt (4 oz) Tru-Blu 0689 $7.65 L109

112 Banjo Hose Fittings LIQUID Banjo Polypropylene Hose Barbs Precision molded in polypropylene Glass reinforced for stability, strength and toughness Pressure to 150 PSI at 70 Hose barbs are molded specifically to fit properly in hose Sizes range from ¼" to 4" Combination sizes available for elbows and straight barbs Excellent chemical resistance Poly Hose Shank HBEL " Hose Shank x 1" Hose Shank 0152 $1.69 L110 Poly Hose Barbs HB-025 ¼" M. Thrd. x ¼" Hose HB ¼" M. Thrd. x 3 8" Hose HB " M. Thrd. x 3 8" Hose HB " M. Thrd. x ½" Hose HB ½" M. Thrd. x 3 8" Hose HB-050 ½" M. Thrd. x ½" Hose HB ½" M. Thrd. x ¾" Hose 0091 $1.01 HB ¾" M. Thrd. x ½" Hose 0091 $1.01 HB-075 ¾" M. Thrd. x ¾" Hose HB ¾" M. Thrd. x 5 8" Hose 0111 $1.24 HB-075/100 ¾" M. Thrd. x 1" Hose 0111 $1.24 HB " M. Thrd. x ¾" Hose 0111 $1.24 HB-100 1" M. Thrd. x 1" Hose 0093 $1.03 HB-100/125 1" M. Thrd. x 1¼" Hose 0137 $1.52 HB-125/075 1¼" M. Thrd. x ¾" Hose 0137 $1.26 HB-125/100 1¼" M. Thrd. x 1" Hose 0113 $1.29 HB-125 1¼" M. Thrd. x 1¼" Hose 0116 $1.29 HB-125/150 1¼" M. Thrd. x 1½" Hose 0260 $2.88 HB-150/125 1½" M. Thrd. x 1¼" Hose 0173 $1.92 HB-150/100 1½" M. Thrd. x 1" Hose 0173 $1.92 HB-150 1½" M. Thrd. x 1½" Hose 0162 $1.80 HB-150/200 1½" M. Thrd. x 2" Hose 0297 $3.30 HB-200/150 2" M. Thrd. x 1½" Hose 0247 $2.75 HB-200 2" M. Thrd. x 2" Hose 0197 $2.19 HB-300 3" M. Thrd. x 3" Hose 0636 $7.07 HB " M. Thrd. x 4" Hose 1887 $20.96 Poly Hose Barb Tee HBT ½" x ½" x ¾" Hose 0261 $2.90 HBT-075 ¾" Hose Shank 0261 $2.90 HBT-100 1" Hose Shank 0277 $3.07 T-200 2" Hose Barb 0837 $9.30 HBT-300 3" Hose Barb 1489 $16.54 Y Fitting (Barb x Barb x Barb) Part# Mat. Barb Barb SKU Price TYY444 Poly ¼" ¼" 0145 $1.61 TYY666 Poly 3 8" 3 8" 0123 $ X SS 3 8" 3 8" 1280 $14.22 TYY888 Poly ½" ½" 0123 $1.37 Poly Elbow Hose (Barb x Barb) Part# Barb Barb SKU Price EL14HB ¼" ¼" EL38HB 3 8" 3 8" EL12HB ½" ½" EL34HB ¾" ¾" EL100HB 1" 1" 0138 $1.54 EL114HB 1¼" 1¼" 0385 $4.28 EL112HB 1½" 1½" 0364 $4.05 EL200HB 2" 2" 0473 $5.26

113 Poly Hose Fittings Hose Barb (90 Elbow) HB ¼" M. Thrd. x ¼" Hose 0113 $1.26 HB " M. Thrd. x 3 8" Hose 0113 $1.26 HB-50/38-90 ½" M. Thrd. x 3 8" Hose 0113 $1.26 HB ½" M. Thrd. x ½" Hose 0113 $1.26 HB-50/75-90 ½" M. Thrd. x ¾" Hose 0113 $1.26 HB-75/50-90 ¾" M. Thrd. x ½" Hose 0143 $1.59 HB ¾" M. Thrd. x ¾" Hose HB-75/ ¾" M. Thrd. x 1" Hose 0143 $1.59 HB-100/ " M. Thrd. x ¾" Hose 0147 $1.63 HB " M. Thrd. x 1" Hose 0121 $1.63 HB-100/ " M. Thrd. x 1¼" Hose 0179 $1.99 HB-125/ ¼" M. Thrd. x 1" Hose 0179 $1.99 HB ¼" M. Thrd. x 1¼" Hose 0152 $1.68 HB ½" M. Thrd. x 1½" Hose 0365 $4.05 HB " M. Thrd. x 2" Hose 0399 $4.43 Tee (Barb x Barb x Barb) Part# Barb Barb SKU Price T14 ¼" ¼" T1438 ¼" 3 8" T38 3 8" 3 8" T " ½" 0108 $1.20 T1238 ½" 3 8" T12 ½" ½" T58 5 8" 5 8" T3412 ¾" ½" 0183 $2.03 T34 ¾" ¾" T100 1" 1" 0224 $2.49 T114 1¼" 1¼" 0256 $2.85 T112 1½" 1½" 0252 $2.80 T200 2" 2" 0837 $9.30 LIQUID HB " M. Thrd. x 3" Hose 1932 $21.46 Poly Elbow FPT x Hose Barb Part# Barb Barb SKU Price EL3812F 3 8" ½" 0166 $1.85 EL3412F ¾" ½" 0176 $1.95 Poly Coupling Female Thread Part# Size SKU Price FC18N 1 8" 0153 $1.70 FC14N ¼" 0166 $1.85 FC " 0150 $1.67 For Other Size Fittings Not Shown See Banjo Section Poly Tee Female Thread x ¼" Gauge Port Part# Size SKU Price GTT1214 ½" 0725 $8.06 GTT3414 ¾" 0808 $8.97 TEG100 1" 1197 $13.30 Poly Hose (Mender Barb x Barb) Part# Barb Barb SKU Price SHM14 ¼" ¼" SHM3814 ¼" 3 8" SHM38 3 8" 3 8" SHM1238 ½" 3 8" SHM12 ½" ½" SHM1258 ½" 5 8" SHM58 5 8" 5 8" HM075 ¾" ¾" 0116 $1.29 HM100 1" 1" 0143 $1.59 HM125 1¼" 1¼" 0160 $1.78 HM150 1½" 1½" 0285 $3.17 HM200 2" 2" 0375 $3.97 HM300 3" 3" 1118 $12.42 L111

114 Poly Hose Fittings LIQUID Poly Elbow MPT x Hose Barb Part# MPT Barb SKU Price EL " ¼" EL " 3 8" EL1414 ¼" ¼" EL1438 ¼" 3 8" EL1412 ¼" ½" EL " ¼" EL " 3 8" EL " ½" EL " 5 8" EL1214 ½" ¼" EL1238 ½" 3 8" EL1212 ½" ½" EL1258 ½" 5 8" EL1234 ½" ¾" EL3438 ¾" 3 8" EL3412 ¾" ½" EL3434 ¾" ¾" EL34100 ¾" 1" 0144 $1.60 EL " ½" 0132 $1.47 EL " ¾" 0138 $1.54 EL100 1" 1" 0144 $1.60 EL ¼" ¾" 0301 $3.34 EL ¼" 1" 0306 $3.40 EL ¼" 1½" 0470 $5.22 (Quantity Discounts on 25 and Up) Poly MPT x Hose Barb Part# MPT Barb SKU Price A " ¼" A1414 ¼" ¼" A1438 ¼" 3 8" A1412 ¼" ½" A " ¼" A " 3 8" A " ½" A " 5 8" A1214 ½" ¼" A1238 ½" 3 8" A1212 ½" ½" A1258 ½" 5 8" A1234 ½" ¾" A3414 ¾" ¼" A3438 ¾" 3 8" A3412 ¾" ½" A3458 ¾" 5 8" A3434 ¾" ¾" A34100 ¾" 1" A100 1" 1" A ¼" ¾" 0128 $1.42 A ¼" 1" 0128 $1.42 Poly Hex Head Pipe Plug Part# Size SKU Price F18 1 8" F14 ¼" F38 3 8" Banjo Suction Basket Strainer Part# Size SKU Price 150SBS 1½" 0862 $ SBS 2" SBS 3" 2138 $23.75 L112

115 Banjo Flange Fittings Flange Coupling Part# Size SKU Price M100CPG 1" 0302 $3.35 M200CPG 2" 0612 $6.80 M220CPG 2" FP 0811 $9.01 M300CPG 3" 0956 $ º Flange Elbow Part# Size SKU Price M100CPG90 1" 0422 $4.68 M200CPG90 2" 0705 $7.83 M200CPG90SH 2" Short 0705 $7.83 M220CPG90 2" FP 0641 $7.12 M220CPG90SH 2" FP Short 0641 $7.12 LIQUID M300CPG90 3" 3043 $33.81 Flange Tee Part# Size SKU Price M100TEE 1" 0388 $4.31 M101TEE 1" Long 0388 $4.31 M200100TEE 2" x 1" 0781 $8.67 M200TEE 2" 0628 $6.97 M220TEE 2" FP 0740 $8.22 M300TEE 3" 3492 $ º Sweep Elbows Increase the Flow! Part# Size SKU Price M220ASWP90 2" FP FL x M 0813 $9.03 M220SWP90 2" FP FL x FL 0813 $9.03 M300ASWP90 3" FL x M 4102 $45.57 M300MPTSWP90 3" FL x MNPT 4102 $45.57 M220SWP90SS 2" FP SS x FS 5889 $65.43 M300SWP90 3" FL x FL 3729 $41.43 Female Pipe Flange Adapter Part# Size SKU Price M100075FPT 1" FL ¾" FPT 0234 $2.60 M100FPT 1" 0266 $2.96 M200FPT 2" 0772 $8.58 M220FPT 2" FP 1244 $13.82 Flange Reducer Part# Size SKU Price M200100CPG 2" x 1" 0819 $9.10 M220100CPG 2" x 1" 0902 $10.02 M220200CPG 2"FP x 2"STD 0902 $10.02 M300220CPG 3" x 2" FP 1785 $19.83 Flange Cross Part# Size SKU Price M100CR 1" 1136 $12.63 M200CR 2" 1853 $20.59 M220CR 2" FP 2038 $22.65 M300CR 3" 4099 $45.54 Flanged MPT Fittings Part# Size SKU Price M100075MPT 1" FL x ¾" MPT 0164 $1.82 M100MPT 1" FL x 1" MPT 0153 $1.70 M200125MPT 2" FL x 1-1¼" MPT 0266 $2.96 M200150MPT 2" FL x 1-1½" MPT 0266 $2.96 M200MPT 2" FL x 2" MPT 0266 $2.96 M220MPT 2" FP FL x 2" MPT 0266 $2.96 M300MPT 3" FL x 3" MPT 0740 $8.22 L113

116 Banjo Flange Fittings LIQUID Ribbed Gaskets for Manifold Fittings The ribs hold gasket in place during installation Part# Size SKU Price M101G 1" EPDM Manifold Gasket 0098 $1.09 M201G 2" EPDM Manifold Gasket 0115 $1.27 M221G 2" FP EPDM Manifold Gasket 0125 $1.39 M301G 3" EPDM Manifold Gasket 0135 $1.50 Straight Flanged Hose Barbs Part# Size SKU Price M100075BRB 1" FL x ¾" H 0123 $1.37 M100BRB 1" FL x 1" H 0153 $1.70 M200100BRB 2" FL x 1" H 0302 $3.35 M200125BRB 2" FL x 1-1¼" H 0312 $3.47 M200150BRB 2" FL x 1-1½" H 0275 $3.05 M200BRB 2" FL x 2" H 0275 $3.05 M220150BRB 2" FP FL x 1½" H 0275 $3.05 M220BRB 2" FP x 2" H 0275 $3.05 M300220BRB 3" FL x 2" H 0927 $10.30 M300BRB 3" FL x 3" H 0838 $ º Elbow Flanged Hose Barbs Part# Size SKU Price M10075BRB90 1" FL x ¾" H 0148 $1.65 M100BRB90 1" FL x 1" H 0148 $1.65 M200100BRB90 2" FL x 1" H 0558 $6.20 M200125BRB90 2" FL x 1-1¼" H 0558 $6.20 M200150BRB90 2" FL x 1-1½" H 0558 $6.20 M200BRB90 2" FL x 2" H 0473 $5.26 M220150BRB90 2" FP FL x 1½" H 0558 $6.20 M220BRB90 2" FP x 2" H 0558 $6.20 M300220BRB90 3" FL x 2" H 0922 $10.25 M300BRB90 3" FL x 3" H 2242 $24.91 Manifold Accessories Clamps & Gaskets Part# Size SKU Price FC Series Worm Clp $6.20 FC Series Worm Clp $7.14 FC Series Worm Clp $7.83 FC Series Worm Clp $10.79 M101G 100 Series EPDM Gskt $1.29 M100GV 100 Series Viton Gskt $ G 200 Series Gskt GV 200 Series Viton Gskt $ G 220 Series EPDM Gskt GV 220 Series Viton Gskt $ G 300 Series EPDM Gskt GV 300 Series Viton Gskt $15.12 Flange Plugs Part# Size SKU Price M100PLG 1" 0153 $1.70 M200PLG 2" 0266 $2.96 M220PLG 2" FP 0337 $3.75 M100PLG025 1" with ¼" 0624 $6.93 M200PLG025 2" with ¼" 0808 $8.97 M200PLG075 2" with ¾" 0808 $8.97 M300PLG 3" 0902 $10.02 T-Bolt Flange Clamps Part# Size SKU Price FC220TB 2" FP Hi-torque 1470 $16.33 FC300TB 3" FP Hi-torque 1811 $20.12 Bolted Flange Clamps Part# Size SKU Price FC220B 2" FP Bolted 2450 $27.22 FC300B 3" Bolted 2730 $30.33 L114

117 Garden Hose and Accessories Spray Nozzle Heavy-duty machined aluminum construction stands up to hard use Multiple spray patterns, adjusts from a powerful jet stream to a gentle fan Aluminum hose connection provides a tight fit, will not rust Resists dents, mars and scratches and also protects any surface that comes in contact with nozzle Garden Hose 35% lighter than conventional hoses Kink free design Made in the USA Lifetime guarantee Part# Size SKU Price PPWH ft $68.40 PPWH ft $ LIQUID Part# Size SKU Price GHN075 ¾" 2183 $24.46 Additional Garden Hose Fittings Banjo Garden Hose Couplings Quick and simple way to connect and disconnect your garden hose. Durable, rustproof yellow fiberglass reinforced polypropylene construction. BA776 MGHT x ¾" MPT 0438 $4.96 BA74 ½" MPT x ¾" MGHT 0405 $4.58 Adapter GHFT075A ¾" F Thread 0315 $3.52 GHMT075F ¾" M Thread 0314 $ F GHT Swivel x 0760 $8.61 M NPTF Couplers GHMT075B ¾" M Thread 0673 $7.47 GHFT075D ¾" F Thread 0663 $7.36 Y-9-BR 3way GHT x MGHT 0306 $3.30 E3412 ¾" GHT x ½" MPT NY Nipple DEL MGHT x ¾" M NY Nipple G34 ¾" MPT x ¾" MGHT L115

118 Safety Equipment GOOD PVC Gloves LIQUID 7712R 12" Cuff 0348 $ R 14" Cuff 0381 $4.23 BETTER Heavy Duty PVC Glove " Gauntlet 0541 $ " Gauntlet 0563 $6.25 Safety Goggles 551 Bouton, Vented 0440 $ Bouton, No Vent, NH $ F Bouton, No Vent, Fogless 0370 $ Clear Vented 0566 $ Indirect Vent, Fog Free 0707 $ Indirect Vent, Tinted 0716 $ Bouton, Vented for Glasses 0838 $ Goggles with Face Shield 2182 $24.24 BEST Neopreme Gloves 3414 Neopreme (L) 0676 $ XL Neopreme (XL) 0682 $7.58 Sport Safety Glasses These safety glasses provide protection and style Clear 0493 $ Mirrored 0442 $4.91 L116 Nitrile Gloves These chemical gloves are made of nitrile for chemical resistance. They are unlined to prevent wicking of chemicals. Green in color with a 12" length. Part# Size SKU Price M $1.88 M $1.94 Disposable Nitrile Gloves nitrile chemical gloves are handy when changing spray tips or handling chemicals. 7005L Large 1866 $ XL XL 1778 $19.75 Paper Dust Mask 8511 Paper dust mask 2814 $32.26 Disposable Tyvek Coveralls Disposable coverall is made of Dupont Tyvek material for durability, economy and practicality. Full cut for comfort with full length zipper and shirt collar. Unique structure creates excellent barrier against acids and chemicals. Part# Size SKU Price 1412-L L (no hood) 0579 $ L Large 0730 $ XL XL 0762 $8.47 4T299 Rubber Apron 1957 $21.74

119 Liquid Hose Clear Vinyl Tubing (Sight Gauge) 100' Rolls Part# ID Wall SKU Price 14SCV ¼" 1 8" SCV 3 8" 1 8" x116SCV ½" 1 16" x18SCV ½" 1 8" SCV 5 8" 1 8" x116SCV ¾" 1 16" SCV ¾" 1 8" 0100 $1.11 1SCV 1" 1 8" 0128 $ SCV 1¼" ¼" 0323 $ SCV 1½" ¼" 0501 $5.56 Braided Clear with White Braid Vinyl Tubing 300' Rolls Part# ID SKU Price 290FG-14 ¼" FG " FG-12 ½" FG-34 ¾" 0094 $ FG-1 1" 0143 $ FG-114 1¼" 0308 $ FG-112 1½" 0373 $4.15 Spray Hose PSI 500' Rolls Part# ID SKU Price SH-1/4EPDM ¼" SH-3/8EPDM 3 8" SH-1/2EPDM ½" SH-5/8EPDM 5 8" 0098 $1.09 SH-3/4EPDM ¾" 0097 $1.07 SH-1EPDM 1" 0130 $1.44 SH-11/4EPDM 1¼" 0308 $3.42 SH-11/2EPDM 1½" 0366 $4.07 SH-2EPDM 2" 0572 $6.36 *Not to be used for high pressure anhydrous ammonia Bumble Bee Hose Part# ID SKU Price 300EPDM-1 1" 0172 $ EPDM112 1½" 0221 $ EPDM-2 2" 0321 $ EPDM-3 3" 0608 $ EPDM-4 4" 1070 $11.88 PVC Clear with White Spiral Suction Hose 100' Rolls Part# ID SKU Price 112CL-34 ¾" CL-1 1" 0112 $ CL-114 1¼" 0112 $ CL-112 1½" 0134 $ CL-2 2" 0191 $ CL-3 3" 0340 $ CL-4 4" 0556 $ CL-6 6" 3785 $42.05 EPDM Nylon Braided Black Ribbed Suction Hose 100' Rolls Part# ID SKU Price 390DS-114 1¼" 0283 $ DS-112 1½" 0343 $ DS-2 2" 0447 $ DS-3 3" 0776 $8.62 EPDM Wire Reinforced Black with Blue & White Stripe Suction Hose 100' Rolls Part# ID SKU Price N ¼" 0311 $3.46 N ½" 0374 $4.16 N " 0441 $4.90 N ½" 0533 $5.92 N " 0624 $6.93 N ½" 1398 $15.53 N " 0990 $11.00 Chemical Hose Part# ID SKU Price Chem-Flex-1 1" 1062 $11.79 Chem-Flex-112 1½" 1304 $14.49 Chem-Flex-2 2" 1580 $17.56 Chem-Flex-3 3" 2580 $28.66 *Not to be used for high pressure anhydrous ammonia CALL FOR FULL ROLL PRICING LIQUID L117

120 Hose & Banding JOO1 C001 LIQUID PVC Lay Flat Discharge Hose Part# ID SKU Per Ft 160BL-112 1½" BL-2 2" BL-3 3" 0096 $ BL-4 4" 0124 $ BL-6 6" 0431 $4.78 EVA Hose Part# V ID Roll Length SKU Per Ft 3 8" 500' SEVA ½" 300' SEVA 5 8" 250' SEVA ¾" 250' SEVA 1" 100' 0096 $1.07 The Band-It Tool C001 and J001 Cutter/Adapter A drop forged electroplated tool with tensioning capability of over 2,400 pounds and built-in cutter. Used to apply Band-it Bands and Buckles, Strapping and Free-end Clamps. Band and Buckles Part# Description ID SKU Price SS500 Banding 100ft ½" 9584 $ SS625 Banding 100ft 5 8" $ SS750 Banding 100ft ¾" $ CS500 Buckles ½" CS625 Buckles 5 8" 0089 $1.25 CS750 Buckles ¾" 0114 $1.29 Buckles are packaged 100 to a box. Orange & Black EVA Hose Part# ORV ID Roll Length SKU Per Ft 3 8" 500' EVA-3/8-BLACK 3 8" 500' Band -It Preformed Clamps Galvanized Part# J301 Clamp ID SKU Price 13 16" J303 1" J305 1½" 0365 $4.06 J310 2¾" 0230 $2.56 Braided EVA Hose Part# ID SKU Per Ft 38BEVA 3 8" 0098 $ BEVA ½" 0112 $ BEVA ¾" 0175 $1.94 1BEVA 1" 0320 $3.56 Stainless Steel Clamp Part# ID SKU Price JS " 0169 $1.91 J210 2¾" 0421 $4.68 J213 4" 0828 $9.20 J $4.26 Other Sizes available, Call With Your Request. L118 CALL FOR FULL ROLL PRICING

121 Hose Clamps Stainless Steel Miniature Worm Gear Clamps with 5 16" Band Part# Min Max SKU Price MH4 ¼" 5 8" MH6 5 16" 7 8" MH8 ½" 29 32" MH " " MH ¼" 0096 $ MH16 16" 1¼" 0098 $1.09 Quantity Discounts -25% for 100 Stainless Steel Worm Gear Clamps with ½" Band Part# Min Max SKU Price HS6 HS8 3 8" 7 8" " 1" HS10 ½" 1 1 8" HS12 ½" 1¼" HS16 ¾" 1½" HS20 ¾" 1¾" HS24 1" 2" HS28 HS32 HS " 2¼" " 2½" " 2¾" HS " 3" 0140 $1.56 HS " 3½" 0154 $1.71 HS " 3¾" 0168 $1.87 HS56 2½" 4" 0168 $1.87 HS " 4½" 0189 $2.10 HS " 5" 0189 $2.10 HS " 5½" 0217 $2.42 HS88 4¼" 6" 0224 $2.54 HS96 4¾" 6½" 0224 $2.54 HS104 4" 7" 0232 $2.58 Heavy Duty Stainless Steel T-Bolt Clamps All Stainless Steel Construction Stainless Steel Nut with Silver Plating to Prevent Seizing 360 Sealing Surface Ideal for High Torque Applications Strong, Positive Connections Nylon Lock Feature 3 Spot Welds for Extra Strength Burst Pressures to 10,000 PSI Part# Min Max SKU Price TC " 1.34" 0487 $5.41 TC " 1.70" 0487 $5.41 TC " 1.87" 0432 $4.80 TC " 2.06" 0432 $4.80 TC " 2.18" 0443 $4.93 TC " 2.50" 0443 $4.93 TC " 2.55" 0498 $5.53 TC " 2.62" 0452 $5.02 TC " 2.81" 0498 $5.53 TC " 3.18" 0498 $5.53 TC " 3.62" 0483 $5.37 TC " 3.75" 0483 $5.37 TC " 4.56" 0575 $6.39 TC " 4.75" 0960 $10.66 TC " 4.94" 0960 $10.66 Plated Malleable Iron Double Bolt Clamps A Rugged, Plated Malleable Iron Two-Bolt Clamp with Machine Bolts and Hex Nuts. Inner Surface has Dual Gripping Ridges. Bolt Lugs are Reinforced to Prevent Bending out of Alignment. Part# Min Max SKU Price 400DIXON 3½" " 1444 $ ¼" " 1836 $20.81 Other Sizes available, Call With Your Request. LIQUID L119

122 Spray Guns LIQUID John Bean 785 Spray Gun 800 PSI, 48 GPM Heavy duty tall tree gun Adjustable from fine spray mist to a solid stream by a simple twist of the wrist Part# Descriptions SKU Price Gun $ Hamilton Super-Jet Trigger Gun The Super-Jet Trigger gun provides a pattern from hollow cone to straight stream. Shut off at the nozzle allows dripless operation for making this gun ideal for use with popular burnout chemicals. The gun is most popular with ATV operatiors and estate sprayers. With a length of 22", a locking handle and a pressure rating of 800PSI, it can handle all of your spraying needs. Part# SKU Price $ (Repair Kit) 0341 $3.79 Adjustable Pattern Spray Guns The adjustable spray pattern guns are ideal for chemical spraying, wash down and other applications whee adjusting between stream and cone spray patterns up to 1200 PSI and 30 GPM are needed. Max. PSI: 1200 ½" MNPT Adjust pattern from stream to cone Part# Length GPM SKU Price " $ " $ Adjustable Pattern Spray Guns The and L adjustable pattern spray gun offers a universal solution to managing property boundaries, pest control and many other applications where adjusting between stream and cone spray patterns up to 600 PSI and 4.5 GPM is needed. JD9C Spray Gun The JD9C is a heavy duty spray gun adjustable from fine fog to long distance, or stream. The JD9C has a convenient trigger lock for continuous spraying and comes with a choice of 7 different interchangeable spray nozzles and tips. Drip-Free shut-off Convenient trigger lock for continuous spraying. Maximum 1000 psi. Adjustable from fine fog to long distance pencil stream. Weight: 3 lbs. Most greenhouse growers choose the small nozzle. Part# Descriptions SKU Price JD9C Gun $ L120 Part# Length SKU Price /4" $ L 22" $110.97

123 Spray Guns Lawn Spray Gun Maximum operating pressure of 200 PSI Made of Nylon with Viton O-rings and stainless steel springs. Interchangeable nozzle tips are color-coded for easy identification of nozzle tip size. Nozzle tips provide a 45 full cone showerhead spray pattern. Trigger lock for continuous spraying. Options available: hose shank swivel for inlet connection and extension wand and adapters for low-volume and spot spraying. Part# Descriptions SKU Price Lawn Gun 4656 $51.72 TriggerJet Spray Guns This gun is lightweight, designed for use with a backpack, canister or other low-pressure sprayers. The TriggerJet is made of molded polypropylene for excellent chemical resistance and durability. 3 /8" Hose barb inlet Trigger lock permits locking gun in an open postition for continuous flow Max operating pressure of 100 PSI Approximate max hose O.D: ½" Polypropylene strainer located inside handle to prevent tip clogging PP " Poly Extension 0866 $9.62 Spray Gun AL " Aluminum Spray Gun 1035 $11.50 LIQUID Aluminum Spray Gun 24" Aluminum spray gun is a natural for spot spraying, livestock, fence rows and trees. Adjustable from hollow cone to stream ¾" GHT standard Part# Size SKU Price AA2-AL45 24" 6591 $73.23 TriggerJet Spray Gun Maximum pressure rating is 150 PSI Adjustable ConeJet Spray tip Trigger lock permits locking gun in an open position for continuous flow Accepts all standard spray tips and strainers PP-15-1/4 15" Spray Gun 2370 $ PP-24-1/4 24" Spray Gun 2732 $30.35 CP22673-PP Replacement Elbow 0103 $ PPB-X8-VI Replacement Adj Nozzle 0547 $6.08 Spraying Systems Aluminum Spray Gun Quality designed and built for heavy duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip free shutoff and instant operating response. Convenient trigger lock for continuous spraying. Up to 800PSI pressure range Up to 22" AA43LA-AL6 13" Length 200 PSI 7091 $78.78 AA43HA-AL6 13" Length 800 PSI 7294 $81.03 AA43L-AL6 22" Length 200 PSI 7404 $82.26 AA43H-AL6 22" Length 800 PSI 7615 $84.61 L121

124 Foam Marker LIQUID Foam Marking Systems Spraying, fertilizing and other agricultural tasks can be a real adventure without some way to track where you have been. Today's high chemical costs make a foam marking system essential for accurate economical spraying. Banjo Anti Vortex Vent Cap VC230 Vent Cap 16 Mesh 1128 $12.53 LM gallon poly tank Aproximately hours of marking 16" tall, 34" x 16.5" Thomas air compressor and Shurflo pump Max amperage draw: 15 amps Includes: 200ft of tubing, 25ft harness, switchbox and two premium foam mixing chambers $1, Banjo Pressure Relief Valve The Banjo Pressure Relief Valve helps electric valve failure from pressure spikes. Part# SKU Price MPRV $45.46 Foam Marker Parts CH200NO Boot for 2" Hose 4468 $ EA Boot for 1¼" Hose 1010 $11.22 MR. K-9 Built in softener concentrate Long lasting foam Economical Works great in cold or hot weather Description SKU Price Fair-Foam $ Gallons $ Gallons $1, L122 Foam Bags 929EA Cloth Bags 0326 $3.62 SJ000 Green Poly Bags 1565 $17.39

125 Wind Meters Skymate has a convenient jackknife design allowing more precise wind speed and temperature measurements. The users hand is distant from the wind impeller and temperature sensor resulting in undisturbed air flow. Skymate is water resistant and has a high-visibility case. FEATURES WM10 WM20 WM30 WIND SPEED X X X MAX WIND SPEED X X X AVG WIND SPEED TEMPERATURE WIND CHILL X X X X X X X LIQUID RELATIVE HUMIDITY X DEW POINT X SKU Price 6613 $73.47 SKU Price $ SKU Price $ Measuring Pitcher Use this 64 oz. calibration container to check for worn out tips. Part# Size Price FJ oz. $9.05 FJ oz. $10.67 FJ oz. $14.98 Penberthy Eductors Penberthy Tank Mixing eductors offer increased agitation of liquids in tanks to reduce settling. They are molded in one piece for strength. Part# Size SKU Price TME-34 ¾" Poly $49.27 TME112 1½" Poly $ TME200 2" $ Chem-Blade No more need to open jugs and bags by hand or with your pocket knife. Simply press them on to the chem-blade inside of your inductor tank to empty your container fast and safely! Finish the process by supplying water pressure to quickly but thoroughly rinse the container. Reduce skin/chemical contact No waste of costly chemicals Fits in any 16" lid tank GPI Calibration Container This 5 gallon GPI Calibration Container is ideal for calibrating herbicide meters. It is molded from polyethylene for durability. Lightweight and easy to use, it is calibrated at the factory. Part# SKU Price $84.76 Hand Held Wind Meter This direct reading hand held wind meter will give you instant readings. Hold meter at eye level, back of unit to wind. White ball in tube indicates wind speed. Meter has two scales for maximum accuracy and easy reading. Part# SKU Price 89001D 2882 $32.02 Jet Rinse Triple Rinsing Nozzle Rinsing nozzle makes triple rinsing easy. Simply attach it to a garden or nurse tank hose. Its sharp point will puncture the side or bottom of plastic or metal containers. Made in the USA Overall length 10" Part# SKU Price JR $35.89 L123

126 Chemical Inductors LIQUID Tank Size (gallons) Tank Size (liters) Lid Closed Closed Vented 2 - Hinged and Vented Knife Included Included Included Included Safety Stickers Included Included Included Included Agitators " Fittings "Leakless" Manifold or Threaded "Leakless" Manifold or Threaded "Leakless" Manifold "Leakless" Fitting Size 2" (1 1 2" Venturi) 2" 2" and 3" 3" Frame Free Standing or Frame Mount Free Standing With Pump Mount Free Standing or Pump Mount Free Standing Plasti RotoFlush Tank Cleaner N/A N/A Included Included The Handler mixes powders and dry products easily and quickly, calibrated tanks easily accomodate batch mixtures. With a capacity of 15 US gallons, the Handler I is the smallest handler and is designed primarily for direct induction of chemicals into sprayers. The Handler I is available as a free standing unit (shown) or frame mount model, and is a popular addition to some of the top sprayers on the market today. With a capacity of 42 US gallons, the Handler II is a new design that allows the user to batch mix everything from liquids, to dry products and powders, as well as directly induct chemical into the sprayer as you see fit. The Handler II has a standard 1 nozzle agitation system and comes complete with a pump mounting frame and recirculation package. With a capacity of 70 US gallons, the Handler III allows the user to batch mix everything from liquids, to dry flowables and powders, as well as directly induct chemical while the sprayer is being filled. The Handler III is available with a pump mounting frame and comes with the RotoFlush tank rinse nozzles to prevent contamination of products. With a capacity of 230 US gallons, the Handler IV is sloped for full drainage, and a special bulkhead is at the bottom of each tank to ensure complete drainage. The Handler IV comes with a convenient forklift-ready base and containment tray. The Handler patented knife system: Cuts plastic chemical jugs Emptys their contents for mixing Fully rinses the jugs for safe disposal DC-Seed Treater Pricing includes 15 gallon cone bottom tank with relief valve and plumbing. Description Price 12 Volt Pump $ (110 volt option available) 15 & 30 Gallon Chemical Inductor Chemical Inductors are complete with a sturdy iron stand, Banjo Manifold, plumbing and hose. Description Size SKU Price 15 Gallon 2" $ Gallons 2" $ Gallons 3" $ L124

127 AMMONIA AMMONIA A125

128 Ammonia Products Index AMMONIA ITEM PAGE ITEM PAGE ACME Adapters... A141-A142 Plumbing Accessories (NH3).... A155 Ammonia Nurse Tank Decal Chart.... A173 Pumps Bulldog Jacks.... A163 Blackmer Ammonia... A166 Bumpers.... A164 Corken Ammonia... A167, A168 Compressors (Corken & Blackmer)... A168 Raven Accuflow... A127-A128 Coulter Arm... A158 Safety Decals... A172 Couplings... A143 Safety Equipment... A160, A161 Decals... A170-A171 Shanks... A156 Dry Accessories... A165 Soil Probe... A164 Gauges Spread Pattern Test Kit... A165 Float... A149-A150 Tubes (Bolt-on Anhydrous)... A159 Pressure... A147 Valves Storage.... A148 Angle... A137 Goggles... A161 Back Check... A165 Hitches (Schuck)... A162 Continental... A140 Emergency... A138 Hitch Pins & Bumpers... A164 Excess Flow... A47 Hose (Ammonia).... A151, A152 Globe... A136 Hose End... A135 Klinger s Paint.... A171 Hydraulic Ammonia... A129 Knives (Ammonia)... A157, A158 Internal Relief... A146 Nurse Tank... A139 Manifolds... A133-A134 Rego Valves... A170 Meter Matic.... A130-A132 Relief Valve.... A144, A145 Paint (Klinger s)... A171 Water Containers... A160 Pipe Fittings... A153, A154 A126

129 Raven AccuFlow More from Your NH3 Applications Raven has raised NH3 application technology to new levels of performance by adding AccuFlow HP (high performance) to its AccuFlow line. The new Patent Pending AccuFlow HP system is uniquely designed with unrivaled capacity, the kind you need to run at higher speeds and colder temperatures than ever before. Pared with your Raven control system, AccuFlow and AccuFlow HP super cooling NH3 technology gives you superior accuracy and control over your applications for higher yields, less waste and lower input costs. It's that simple. Dual cooler units available for high rates AMMONIA AccuFlow Six-section NH3 control with Raven's AccuBoom and Switch Pro automatic on-off and VRA section control technology for maximum savings, efficiency and performance. Your choice of valve options to match your farming needs and budget. Two-valve option for maximum precision and performance- one valve opens/closes the system and the other controls the flow rate. Ideal for variable rate applications. Single fast-valve option for a lower cost alternative with trusted savings and precision. Convenient cooler disassembly for easier cleaning and maintenance, long life, and superior performance and reliablility. NH3 monitoring options in gallons or pounds per acre for your preference/situation Space-saver plumbing kits for both the two-valve and fast-valve systems for added convenience when space is limited. AccuFlow HP Plus (High Performance) Industry-first variable speed pump for incredible efficiency, tractor power savings of up to 10 horsepower, and less wear and tear on your system. Advanced system design for running at faster application speeds and colder temperatures, and delivering faster, industryleading ROI! Nearly double the system capacity for taming the heaviest, most demanding situations. Super cooler technology for maintaining the right temperature for more precise NH3 metering and application. SCS440 The SCS440 mon itor pro vides a variety of data including volume left in tank, total area worked, total volume applied, field area, field volume, vehicle speed, distance traveled, area worked per hour, and gallons per minute. Optional GPS compatibility. Set your application rate and the SCS440 automatically maintains that rate throughout your entire job regardless of changes in speed or terrain. The Accu-Flow 30gpm Two Valve System is the ultimate in accurate application of NH3! Systems from $4, A127

130 Raven AccuFlow Parts AMMONIA A128

131 Hydraulic Ammonia Valves Continental R9590 Hydraulic Shut Off R9590 Hydraulic in-line rotary actuator is designed to be mounted in front of any NH3 metering device. Uses standard ¼" ports for easy integrating into hydraulic system. The R9590 uses a rotor actuated ball valve insuring a long and maintenance free life. R9590 1" Valve $ R9590B 1¼" Valve $ R959ORK Repair Kit 4094 $45.49 AMMONIA Continental R6572 Hydraulic Actuator R6572 Hydraulic rotary actuator is designed to be mounted on top of any A,B or C series meter matic. Features standard ¼" ports, indicator flag and corrosion resistant stainless steel rotor. Part# Size SKU Price R6572 Actuator $ R6572RK Repair Kit $4.12 NOTICE: See the manufacturers recommendation for installation A129

132 Meter Matic Repair Kit Which Repair Kit Do I Need? Check this rectangle on your meter. What Is In A Repair Kit. AMMONIA If it says... C Series Red or Blue Meter C4125RS 400 WOG Which outlet style is like yours? How many holes? What size outlet? " FPT 1" FPT A series obsolete. Red meter A6000RS Blue meter A6500RS Red meter B6000RS Blue meter B6500RS Green meter B7200RS A130

133 Continental Meter Matic C2503-RPR Red Meter 2500# of Nitrogen per hour at 100# tank pressure 1" female outlet Rope pull on / off SKU Price $ C Red Meter 2500# of Nitrogen per hour at 100# tank pressure 1" female outlet Hydraulic Actuator on / off SKU Price $ C4103-RPR Blue Meter # of Nitrogen per hour at 100# tank pressure 1" female outlet Rope pull on / off SKU Price $ C Blue Meter # of Nitrogen per hour at 100# tank pressure 1" female outlet Hydraulic Actuator on / off SKU Price $ AMMONIA C2500-RPR Red Meter 2500# of Nitrogen per hour at 100# tank pressure (14) 1 8" female outlets Rope pull on / off SKU Price $ C4100-RPR Blue Meter # of Nitrogen per hour at 100# tank pressure (14) 1 8" female outlets Rope pull on / off SKU Price $ C Red Meter 2500# of Nitrogen per hour at 100# tank pressure (14) 1 8" female outlets Hydraulic Actuator on / off SKU Price $ C Blue Meter # of Nitrogen per hour at 100# tank pressure (14) 1 8" female outlets Hydraulic Actuator on / off SKU Price $ The C series meters offer improved accuracy, greater ability to interchange components, and easier means of setting. Critical metering parts are computer designed and machined to improve accuracy of NH3 application. With only two exceptions, all components are interchangeable between the C-2500 and C-4100 series meters. A131

134 Continental Meter Matic AMMONIA Maximum flow capacity of 6500# Nitrogen per hour at 100# tank pressure Rotary Hydraulic Actuator Single dial setting - Calibrated in lbs. N per hour Easy seal gasket type inlet union Universal mounting bracket (Adaptable to most meter stands) Heat treated, durable, light weight aluminum body Big, low resistance, in-line strainer Unique, straight-bore flow. Virtually no restriction Many years of virtually maintenance free service life Full one year warranty on materials and workmanship 1¼" MPT inlet Part# SKU Price B $1, REPAIR KITS B9500RS Meter Only 5510 $61.21 R9590RK Hyd. Shutoff Only 4094 $ X 09-18X A132

135 Ammonia Manifolds John Blue Impellicone Manifold The CDS-John Blue Impellicone is a flow divider designed for Anhydrous Ammonia (NH3). It distributes NH3 to multiple rows across an applicator with accuracy and flexibility. The CDS-John Blue Impellicone can be used for all NH3 applications at normal rates, while also offering the flexibility to plug unused outlets without sacrificing accuracy. Part# Outlets Size SKU Price IP ¼" $ IP ¼" $ IP ¼" $ AMMONIA John Blue Impellicone Splitter Part# Outlets Size SKU Price IPS " $ IPS " $ Squibb EquiFlow Variable Orifice Manifold The EquiFlow has tremendous flexibility. There are only two models. The A1804 has 21 outlets and the A1805 has 16 outlets. Each model can be plugged down to a fewer number of ports as long as the plugging is reasonably symmetrical the performance is not affected. Because the control ports are actually long slots, a high back pressure can be set relative to tank pressure REGARDLESS of whether you are distributing 75 or 250lbs of NH3 per acre. If more than one Equa-Flow is needed on your toolbar, simply add an EquaFlow 2 or 3 way splitter and adjust each manifold to the same setting so the back pressures are equal. Part# Outlets Size SKU Price ¼" $ ¼" $ Way ¼" $ A133

136 Continental A-MVD Manifolds A-360 This manifold system is a complete turnkey design that includes splitters and manifolds made to your exact application needs. With accuracies as close as three percent to your target rate you can rest easy. The patented step down injector technology mixes and accelerates the ammonia into an upper chamber, the tee, and the lower manifold chamber. These key features mix the vapor and liquid so each outlet gets an equal amount of both to get an even distribution of the ammonia. Each manifold is custom built to your needs, no plugging necessary. If you need the best in ammonia distribution look no further. Try the new A-360 manifold system, you won't be disappointed. AMMONIA Manifold outlets available from 3-16 outlets Includes mounting hardware Includes stainless steel hose barbs on manifolds Can be mounted upside down Interchangeable stainless steel orifices on the splitter for different rates As close as 1 to 3 percent of target rate Pressure gauge port included on manifolds and splitters Splitter outlets available from 3-10 outlets SKU Price $ A-SVD Flow Divider This flow divider is designed to work in conjunction with the A-MVD on large tool bars requiring 3,4 or 5 manifolds. Please specify number of outlets when ordering. SKU Price $ A134 Part# Outlet Size Outlets SKU Material Price A6006B ¼" Cast Iron $64.61 A6007C 1 8" Cast Iron $136.29

137 Manifold Accessories & Hose End Valves Steel Hose Barbs Part# NPT Hose Barb A6132 SKU Price 1 8" 3 8" A94A ¼" 3 8" 0196 $2.18 A1412S ¼" ½" 0262 $2.91 Steel Orificed Hose Barbs Part# NPT Hose Barb A Orifice SKU Price 1 8" 3 8" # $2.07 A ¼" 3 8" # $2.17 AMMONIA Clamps Part# EVA Size Type SKU Price A10 3 8" Pinch MH6 3 8" and ½" Worm Steel Plugs Part# NPT SKU Price 18PS 1 8" 0107 $ PS ¼" Squibb Roto-Seal Hose End Swivel Protects your Hose and Valves The Rotoseal increases freedom of movement to make attaching or disconnecting hose end valves easier. It also prevents twisting of the hose. Double sealed radial ball bearings Full flow 400 PSI working pressure Part# Size SKU Price Rep. Kit 5 year warranty AL109 1" $ TFE pressure core seal AL111 1¼" $ Quick Acting Valves Part# SKU Price A7708L(1") $ AL361(1¼") $ Minimum Bleed Valve Part# SKU Price A7797(1") $ AL362A(1¼") $ Quick Jaw Valve Part# SKU Price AL363(1") $ (Old Part#: ) A135

138 Globe Valves RegO Valves RegO has a reputation for quality unmatched in the industry. All valves have a ¼" plugged opening for hydrostat relief valve or bleeder valve. AMMONIA Size Globe SKU Price Rep. Kit ¾" A7505AP $ A " A7507AP $ A ¼" A7509BP $ A ½" A7511AP $ A " A7513AP $ A " A7517AP $1, A Squibb Valves Squibb Valves have a self-aligning seat disc that rides against stainless steel bearings. Size Globe SKU Price Rep. Kit ¾" AL308P $ " AL310P $ ¼" AL312P $ ½" AL314P $ " AL316P $ " AL320P $ A329AL A331P A334AL Globe Size Material SKU Price Rep. Kit A329AL 1" FNPT x 1" FNPT Aluminum A330 1¼" FNPT x 1" FNPT Ductile Iron $ A331 1¼" FNPT x 1¼" FNPT Ductile Iron $ A333AL 1¼" FNPT x 1¼" FNPT Aluminum $ A334AL 1½" FNPT x 1½" FNPT Aluminum Continental NH3 Valve Maximum flow efficiency makes the MAX-Flow valves ideal for use on nurse tank and field storage tanks. Features stainless steel stem and nylon seat in swivel poppet retainer. Size Globe SKU Price Rep. Kit 1" A $ A2212RK 1¼" A2525H $ A24RK 1½" A $ A25RK 2" A $ A26RK A136

139 Angle Valves RegO Valves RegO has a reputation for quality unmatched in the industry. All valves have a ¼" plugged opening for hydrostat relief valve or bleeder valve. Size Angle SKU Price Rep. Kit ¾" A7506AP $ A " A7508AP $ A ¼" A7510BP $ A ½" A7512AP $ A " A7514AP $ A " A7518AP $1, A Squibb Valves Squibb Valves have a self-aligning seat disc that rides against stainless steel bearings. Size Angle SKU Price Rep. Kit ¾" AL308P $ " AL311P $ ¼" AL313P $ ½" AL315P $ " AL317P $ " AL321P $ AMMONIA A1520 A1525, A1527, A1528, & A1529 End Size Material SKU Price Rep. Kit A1520 1" FNPT x 1¾" Female Acme Aluminum A1525 1¼" FNPT x 1¾" Female Acme Ductile Iron $ A1527 1¼" FNPT x 2¼" Female Acme Ductile Iron A1528 1¼" FNPT x 2¼" Female Acme Aluminum $ A1529 1½" FNPT x 2¼" Female Acme Aluminum $ Continental NH3 Valve Maximum flow efficiency makes the MAX-Flow valves ideal for use on nurse tank and field storage tanks. Features stainless steel stem and nylon seat in swivel poppet retainer. Size Angle SKU Price Rep. Kit ¾" A $ A2212RK 1" A $ A2212RK 1¼" A $ A24RK 1½" A $ A25RK 2" A $ A26RK A137

140 Emergency Valves AMMONIA Continental Emergency Shutdown Valve The A-JJ2L two inch swing valve and the A-JJ2V 11 4" shutoff valve meet the American National Standards ANSI K61-1 and the Compressed Gas Association CGA-G-2.1 requiring all stationary storage installations to have an emergency shutoff valve to be shutdown in case of an emergency from any direction, maximizing the opportunity for a quick and safe shutdown. A-JJ2L 2" FPT in/out ESV External $ A-JJ-2L-RK Valve Kit $23.08 A-JJ2V 1¼" FTP in/out ESV External $ Includes 25' Cable A-JJ-2V-RK Valve Kit $31.65 A-JJ2V A-JJ2L RegO ESV Valve A6010 1¼" ESV Valve $ A6016 2" ESV Valve $1, A6024 3" ESV Valve $1, TFA Plunger Assembly $ ARSS Safety Coupling A53RSS 1" $ A72RSS 1¼" $ RSS Shear Only 1" $ RSS Shear Only 1¼" $88.06 Squibb-Taylor Tripod Safety Coupling Squibb TriPod Safety Coupling prevents damage to riser piping and the nurse tank hose or valves. They have an unconditional five year warranty and are constructed of stainless steel with teflon back check seats for long term dependable operation. They are available in 1" 55GPM, 1" 77GPM and 1¼" 126GPM " 55gpm Vapor Coupler $ " 77 gpm Vapor Coupler $1, ¼" 126gpm liquid $1, O-Ring Kit TP1-1034/TP1 Coupling TP3-1034/TP3 Coupling TP6-0022/TP6 Coupling TP2-1034/TP2 Coupling TP5-0022/TP5 Coupling TP7-0022/TP7 Coupling A138

141 Nurse Tank Valves Vapor Valves Liquid Valves Liquid Fill/Liquid Withdrawal Rego SKU Price A8016DP $ Rego SKU Price A8017DP $ AMMONIA Continental SKU Price A $ Squibb SKU Price A521P $ (Old #: A1598P) Rego SKU Price A8018DP $ Squibb SKU Price A525P $ (Old #: A1590KP) Squibb SKU Price A520R $ (Old #: A1597R) Continental SKU Price A1204E(1") $ A1204-Acme $ Continental SKU Price B1206E $ Squibb SKU Price A522P $ Squibb Valves Part# Size SKU Price AL477EP 1¼" x 1" $ A490NR-95 2" x 1¼" $ A ½" x 1½" $ A490R-95 RegO Valves Part# Size SKU Price A7550P (no ¾" $85.67 excess flow) A7550PX ¾" $ A8020D 1¼" x 1" $ A8012D 1½" x 1¼" $ A8020D A139

142 Continental Valves & Repair Kits Patented two stage excess flow checks allow you to achieve an output increase of 17% or better compared with standard 1¼" withdrawal valves. For top fitted tanks only! Available in 55, 70 or 95 gallon per minute flow rates. AMMONIA CAUTION: For maximum safety and operating efficiency, hose size of 1" or larger should be used-the larger the more efficient. Never use smaller hose or fitting than the outlet size of the valve. Part# Outlet Tank Inlet SKU Price A1406F 1¼" 1¼" $ A1406G 1¼" 1½" $ A1507F 1½" 1½" $ A1507G 1¼" 1½" $ A1507GA 2¼" 1½" $ Special Continental Valves Continental is always listening to industry needs and because of that, they have developed some unique valves to meet our ever changing ways. A1625 Compact 1¼" Globe Valve A2525 High Flow 1¼" Globe with two ¼" ports A215L High Flow 1¼" Valve with acme coupling A2031 Squibb 1" MPT x 1" FPT x ¼" ADTR A140 Repair Kits Rego Valves Description Kit# A7505AP ¾" Globe Valve A A7507AP 1" Globe Valve A A7508AP 1" Angle Valve A A7509BP 1¼" Globe Valve A A7510BP 1¼" Angle Valve A A7511AP 1½" Globe Valve A A7512AP 1½" Angle Valve A A7513AP 2" Globe Valve A A7514AP 2" Angle Valve A A7517AP 3" Globe Valve A A7518AP 3" Angle Valve A A8016DP Nurse Tank Fill A8016B-50 A8017DP Nurse Tank Liquid Withdrawl A8016B-50 A8018DP Nurse Tank Combination A8016B-50 A7707L 1" Quick Acting Globe A A7708L 1" Quick Acting Angle A A7797 1"Angle Minimum Bleed A A7797A 1" Angle Minimum Bleed A Continental A1275 ¾" Angle Valve A2212RK A1375 ¾" Globe Valve A2212RK A1250 1" Angle Valve A2212RK A1350 1" Angle Valve A2212RK A2525 1¼" Globe Valve (Pre 1994) A24RK A2525-H 1¼" Globe Valve (Post 1994) A25HRK A2550 1½" Globe Valve A2550-H-RK A2700 2" Globe Valve A26RK Valves Description Kit# A1201 Nurse Tank Fill A2212RK A1204E Nurse Tank Angle Liquid A2212RK A1206E Nurse Tank Liquid Withdrawl A2212RK A1406F Nurse Tank Liquid Withdrawl A-25H-RK A1406G Nurse Tank Liquid Withdrawl A-25H-RK A1507F Nurse Tank Liquid Withdrawl A-25H-RK A1507G Nurse Tank Liquid Withdrawl A-25H-RK A1507GA Nurse Tank Liquid Withdrawl A-25H-RK Squibb AL308P ¾" Globe Valve AL310P 1" Globe Valve AL311P 1" Angle Valve AL312P 1¼" Globe Valve AL313P 1¼" Angle Valve AL314P 1½" Globe Valve AL316P 2" Globe Valve AL317P 2" Angle Valve AL320P 3" Globe Valve AL321P 3" Angle Valve A525P/A1590KP Nurse Tank Fill Valve A522P/A1592KP Nurse Tank Combination & (FILL) A520R/A1597KP Nurse Tank Liquid Withdrawl A521P/A1598KP Nurse Tank Liquid Withdrawl AL477EP 1¼" x 1" Riser Valve AL343P 1" Minimum Bleed Valve AL345P 1" Quick Acting Valve AL479R 1½"x1¼" Riser valve

143 ACME Couplings & Adapters Female Threads X Female Thread Part# Pipe Acme SKU Price B522 ¾" 1¾" 3455 $38.39 B522B 1" 1¾" 3455 $38.39 Acme X Acme Reducing Coupling Male Female Part# SKU Price 1¾" 3¼" A $ ¾" 2¼" A $76.57 Female Acme Threads X Male Pipe Thread Pipe Acme Rego Continental SKU Price ¾" 1¾" A3175 B $ " 1¾" A3175A B521B 2210 $ ¼" 2¼" A3185 A $ " 3¼" A3195 A $98.18 Female Acme Threads X Male Pipe Thread Extended Safety Coupling AMMONIA 1¾ Acme Coupling With Lug Handle Part# Pipe SKU Price B521BWL 1" MPT 2902 $32.25 B522BWL 1" FPT 4203 $46.70 Acme Rego Continental SKU Price 1¾" A7575L3 A $ ¾" A7575L4 A577B $ ¾" A577C $ ¼" A577D $ ½" A577G $ Locking Safety Coupling Part# Pipe Acme SKU Price A577CLC 1¼" 1¾" $ Male Acme Threads X Male Pipe Thread Adapters Pipe Acme Rego Continental SKU Price 1" 1¾" A5765E A524B $ ¼" 1¾" A5765F A524C $ ¼" 2¼" A5767F A $ ½" 2¼" A533G $ " 3¼" A5769H A $ " 3¼" A5769K A $ Male Acme Threads X Female Pipe Thread Adapters Pipe Acme Rego Continental SKU Price 1" 1¾" A5764E A525B 2659 $ " 3¼" A5768H A $94.32 A141

144 ACME Adapters Male Acme Threads X Male Acme Thread Adapters Acme Acme Squibb Continental SKU Price 1¾" 1¾" A2005S A $ ¼" 2¼" A2007S $ ¼" 3¼" ME277S $ AMMONIA Acme Gaskets and O-Rings Size Gasket SKU Price 1¾" MSW ¼" MSW ¼" MSW $1.31 1¾ Acme Parking Plugs Rego Continental SKU Price A5764W A524WB 1075 $11.94 Size O-Ring SKU Price 1¾" 216SEL ¼" 223SEL ¼" 231SEL Acme Dust Caps Part# Size SKU Price 22-63F 1¾" Plastic, no Chain 0167 $ FC 1¾" Plastic with Chain 0346 $ ¼" Yellow Cap & Chain 0353 $3.92 A529C 1¾" Steel with Chain 2508 $27.86 A535C 2¼" Steel with Chain 6481 $72.00 A ¼" Steel with Chain $ Plastic Acme Dust Plug Size Rego SKU Price 1¾" C5765N 1081 $ ¼" C5767N 1305 $ ¼" ME $29.18 Acme Spanner Wrench Rego SKU Price $49.34 J Wrench Part SKU Price JWRENCH 1822 $20.24 A142

145 Breakaway Couplings IB /4 In-Line Breakaway Coupling Features: Highest Flowing Breakaway Coupler On The Market. No Replacement Date. Internal Parts Have Tested Well With NH3 Addi ves. Ideal For Tandem Tanks Or Toolbars. Safe & Easy Installa on Mounts Between Two Hoses. Simple To Connect & Disconnect In The Field: No Tools Required. AMMONIA IB125 - Toolbar Installation IB125 - Tandem Tank Installation 1" & 1¼" Pioneer Breakaway Couplings Pioneer Breakaway Couplers are U.L. approved for anhydrous ammonia in accordance with OSHA Regulations. Poppet type valves assure positive shutoff. Manufacturer suggests removal after three years " FPT Coupling $ M 1¾" Male Acme $ ¼" Coupling $ Repair for 1" Pioneer O-Ring 0188 $ J-28 Back up Ring 0386 $4.29 Continental Breakaway Continental s High Flow Coupling has no replacement date and two bleeder valves. It has a stainless steel expansion sleeve and HC Aluminum Guide for rust free service. Part# Size SKU Price AHFC-114 1¼" $ A143

146 Relief Valves ¼ Bleeder Valves Used in valves and tanks. TSS3169 ¼" Bleeder Valve-T Handle 1406 $15.62 A411 ¼" Bleeder Valve with 12" Tube 2231 $24.79 A1911SQ ¼" Bleeder Valve with Knob 1104 $12.27 AMMONIA Storage Tank Relief Valves Primarily for use on stationary storage tanks. Size Setting Rego SKU Price 1¼" 250 AA3135 UA $ ¼" 265 AA3135 UA $ ½" 250 A3149G $ A417DC Cap for A417A 0234 $2.47 AA PR Cap for Rego AA3135UA $2.43 Nurse Tank Relief Valves 3 4" Relief valves are designed for use on nurse tanks and small applicator tanks. Size Setting Rego SKU Price ¾" 250 AA313OUA $ Plastic Protective Cap 0140 $1.56 P145 Rubber Protective Cap w/ Ring 0295 $3.28 Hydrostatic Relief Valves Hydrostatic relief valves should be installed in piping whenever liquid may be trapped between shut-off valves. Hydrosatats include cap. Size Setting Rego SKU Price ¼" 350 SS8001J 1977 $21.96 ¼" 450 SS8001U 1977 $21.96 ½" 400 SS8002L 4189 $46.54 ½" 400 SS8022L 5746 $63.83 ½" 450 SS8002U 4189 $46.54 ½" 450 SS8022U 5746 $ Cap For SS Cap For SS8002 Relief Valve Caps For Hydrostats Valve# Dust Cap# A DC A1327 A1325CAP SS SS For Vapor Relief Valves Valve# Dust Cap# A402VA A402NDC A1301A P145 AA3130UA AA3135UA250 AA PR A1310A A A417A A417DC A144

147 Relief Valve Manifolds RegO Relief Valve Manifolds The duoport and multiport are designed for installation in NH3 storage tanks. They offer continuous, uninterrupted service and provide greater safety. One relief valve may be removed and inspected at a time without the need to evacuate the container. Start to Discharge Setting PSIG 250 Container Connection Manifold Part Number Relief Valves Included Inlet Quantity Valve Part# M. NPT Flow Capacity SCFM Air** 2" M. NPT AA8542UA250 2 AA3135MUA250 1¼" (1) 5865 ASME AA8563G 3 AA3135MUA250 1¼" (2)11, "-300#* A8563G A3149MG 2½" (2)18,500 *** A8564G 4 A3149MG (3)27,750 AA8573G 3 AA3135MUA250 1¼" (2)11, "-300# A8573G A3149MG 2½" (2)18,500 *** Aa574G 4 A3149MG (3) 27,750 UL AMMONIA RegO Manifold NH3 Application Start to discharge setting 250 PSIG 2" M-NPTF container connection AA AA8533MA250 Rego Manifold $2, (Relief valves sold separately) Relief Valve Manifold The A1416 relief valve manifold is used on large NH3 tanks to allow removal of a relief valve for inspection or replacement without the need of evacuating the tank. Adequate relief protection is provided by the remaining relief valve in the manifold. Bleeder valves relieve vapor pressure under each relief valve after closing the manifold port, and each port can be closed separately, meeting code requirements. Soft seats allow bubble tight closure of each port. A1416 Squibb Manifold $ A-462 Continental Manifold $ A462-RK Repair Kit $45.58 (Stem Packing-for Squibb ) A145

148 Internal Relief Valves AMMONIA Fisher Internal Relief Valves Intended for transport trucks hauling ammonia, these relief valves are of all steel construction for maximum resistance to rust and corrosion. Part# Size CFM SKU Price H " 3, $ H " 9, $ RegO 2" & 3" Internal Relief Valves 2" & 3" full internal relief valve is used in transport trucks. Part# Size CFM SKU Price A8434G 2" 3, $ A8436G 3" 10, $ Relief Valve Caps A402NDC ¾" Rubber A417DC 1¼" Plastic P145 ¾" Rubber ¾" Plastic ¼" Plastic A402NDC is for ¾" Continental Relief Valves A417DC is for 1¼" Continental Relief Valves P145 is for all ¾" Relief Valves and also can be used as Dust Cover for 1¾" Acme is for ¾" Squibb Valves is for 1¼" Squibb Valves Fisher 2" Internal Relief Valves This 2" internal relief valve is used in storage tanks. The valve is constructed of steel for anhydrous ammonia use. Sometimes used with a reducing flange to replace the old ACF flanged relief valves. Part# SCFM SKU Price H , $ Unikap Cover An inexpensive expandable relief cover that fits virtually all popular sizes Part# Size SKU Price 85A ¾" Thru 1¼" $1.63 A146

149 Pressure Guages 2½" Dial Ammonia Gauges Part# Range SKU Price W # 1152 $12.80 W # 1152 $12.80 W # 1152 $ B Plastic Lens Only 0400 $4.44 2½" Liquid Filled Gauges All stainless steel case and internals Part# Range SKU Price WGGSS # 3783 $42.02 WGGSS # 3783 $42.02 WGGSS # 3783 $42.02 AMMONIA 4" Dial Ammonia Gauges Part# Range SKU Price W # 2106 $23.40 W # 2479 $27.54 W # 2342 $ " Dial Liquid Filled Gauges Part# Range SKU Price WGGSS # 4110 $45.66 WGGSS # 4021 $44.67 WGGSS # 4021 $44.67 Compressor Pressure Gauge Stainless steel case liquid filled pressure gauges mount on the compressor head to monitor suction and discharge pressures psi range with 2½" dial and ¼" center back connection. Part# SKU Price CP $36.64 Storage Container Thermometer For all sizes of storage or transport tanks-½" MPT Part# Size SKU Price " Stem 2133 $23.70 Backmount Liquid Filled Gauge " Stem 2150 $23.89 K9EU Glycern filled - 2½", 160 PSI for Spray Coupe 6964 $77.37 A147

150 Storage Guages Squibb Master Float Gauges Both the 4607A and 4607B float gauges feature a 10" hermetically sealed dial face. Standard gauges mount on side or end of tank 4607A Standard construction gauge recommended for tanks up to 72" in diameter. Mounts directly to a " four bolt adapter 4607B Heavy duty gauge for any size storage tank. Mounts to a ½" eight bolt adapter with spirotalic gasket AMMONIA Part# Tank Diameter Model Opening Size ME2434A 72" 4607A 2" ME2434B 72" 4607B 2½" ME2839A 84" 4607A 2" ME2839B 84" 4607B 2½" ME3245B 96" 4607B 2½" ME3650A 104" 4607B 2½" ME3862A 130" 4607B 2½" REPLACEMENT DIAL: for A series gauges for B series gauges - 2 bracket for "B" series gauges - 3 bracket REPLACEMENT ADAPTERS: " four bolt ½" eight bolt REPLACEMENT SPIROTALIC GASKET: Marshall ACCU-MAX Stationary Float Guage Measure liquid levels within horizontal DOT and Stationary ASME Tanks with fluid capacities above 2,300 gallons. Suitable for use in bobtail, transport, railcar and bulk storage applications. Part# Tank Diameter Model Opening Size Bolts ME2434A " Accu Max 2½" 8 ME " Accu Max 2½" 8 ME " Accu Max 2½" 8 ME " Accu Max 2½" 8 Rotary Gauge Rotary Gauges can be used on stationary or mobile containers. Gauges are installed in 1" container openings. All gauges have stem and dip tubes with an extra large inside diameter. This assures that the correct liquid level can be obtained quickly. Part# A9093 J31L-3/108 REPLACEMENT PACKING REPLACEMENT CAP Description 1" Rego Rotary Gauge 1" Rotary Gauge T10956 & T10957 T10971 A148

151 Float Guage Parts Squibb Gauge Dials Replacement Dials Should a dial be broken or a larger dial face is desired, replacement dials can be supplied for all Taylor float gauges. The Visible 2" dial assembly is easily installed on either Junior or Senior gauges without removing the float gauge from the tank. Part# Float Number Dial Gauge Type Dial Mounting Diameter CV Junior & Senior 2 Screws 2" Visible "4" Visible "4" ½" Master Gauge " 5002S00002 Rochester Senior 2 Screws 2½" AMMONIA Rochester Gauge Dials Size Dial Only Dial Kit SENIOR S18002 JUNIOR Float Gauge Parts Size Gasket Screw JUNIOR SENIOR Squibb Gauge Adapters These adapters permit Taylor float gauges to be mounted on the tank. They are of steel construction. Part# Tank Connection Number of Bolts Style of Gauge " MNPT 4 Senior, Visible "4" Senior, or Master 4102A ½" MNPT 4 Senior, Visible "4" Senior, or Master 4102A ½" MNPT 8 Master 4102B Squibb Flow Indicators Taylor Flow Indicators are installed in liquid pipelines to give visual indication of flow direction or the absence of flow. Capable of showing flow in both directions, the indicator mounts in a standard tee fitting. Part# Item# Pipe Includes Size " 5305 Adapter (2" MNPT) / ½" 5305 Adapter (2" MNPT) " 5305 Adapter (2" MNPT) A149

152 Float Guage Squibb Float Gauges Top Mount Tank Diameter SKU Price AA130A 24" 6974 $77.48 AA160A 30" 8525 $94.71 AA194A 36" 7225 $80.27 AA214A 40" 4831 $53.67 AA240A 46" 4861 $54.00 AMMONIA 45 Mount Tank Diameter SKU Price AC130A 24" 5814 $64.59 AC160A 30" 8525 $94.71 AC194A 36" 3561 $39.56 AC214B 40" 7169 $79.64 AC240A 46" 7169 $79.64 End Mount Tank Diameter SKU Price AD100D 30" 9558 $ AD120E 36" 8828 $98.07 AD140A 40" 7169 $79.64 AD150A 46" 7225 $80.27 Rochester Float Gauges Large Dial Top Mount Tank Diameter SKU Price A " 5091 $56.56 End Center Tank Diameter SKU Price A " 2734 $30.37 Float Gauge Parts 15-7 Junior Gasket 15-4 Senior Gasket 6045S0000 Float 5002S0002 Sr. Roch. Dial Jr. Roch Dial 2208CV Squibb Dial Jr Gauge Screw 2 1/ 32 " Jr. Head 2 1/ 2 " Sr. Head Screws Screws Sr Gauge Screw A150

153 Ammonia Hose EVA Applicator Tubing High quality blue tinted applicator hose is manufactured from the highest quality EVA for maximum service life 3/8" available in orange and black for maximum UV protection. Part# Size Roll SKU Price V1151 ORV " blue 500ft "orange 500ft EVA-3/8-BLACK 3 8" black 500ft SEVA ½" 500ft SEVA ¾" 200ft SEVA 5 8" 250ft SEVA 1" 200ft 096 $1.07 Braided EVA Applicator Tubing This EVA hose is reinforced with a cloth braid for added durability. Part# Size Roll SKU Price 38BEVA 3 8" 300ft 0098 $ BEVA ½" 300ft 0112 $ BEVA ¾" 200ft 0175 $1.94 1BEVA 1" 200ft 0320 $3.56 AMMONIA Braided EPDM Rubber Ammonia Hose Many people are switching to this braided rubber ammonia hose for longer service life. Black in color. Part# Size Roll SKU Price SH38EPDM 3 8" 500ft SH12EPDM ½" 500ft SH34EPDM ¾" 300ft 0097 $1.07 SH1EPDM 1" 200ft 0130 $1.44 LOW PRESSURE USE ONLY Hose Inserts Part# NPT Hose Barb A6132 SKU Price 1 8" 3 8" A94A ¼" 3 8" 0196 $2.18 A1412S ¼" ½" 0262 $2.91 Also Available in Stainless Steel (Full Roll Price Discounts are Available) Goodall Stainless Steel Reinforced Anhydrous Ammonia Hose N2595 braid ammonia An economical stainless braid ammonia hose commonly used for trouble free service on safety. Eight year removal. Part# Size SKU Price N2595-1x12 12 FT $ N2595-1x14 14 FT $ N2595-1x16 16 FT $ N2595-1x18 18 FT $ N2595-1x20 20 FT $ N2595-1x24 24 FT $ N1446 Green stripe braid ammonia An industry standard of quality for decades This hose has an unmatched reputation. 10 year removal. Part# Size SKU Price N1446-1x14 14 FT $ N1446-1x16 16 FT $ A151

154 Ammonia Hose AMMONIA Nylon Reinforced Anhydrous Ammonia Hose Double braided anhydrous hose is great for nurse tank and applicator hoses. The ¾", 1", 1¼" and 2" sizes are available in manufactured assemblies only. 5 year removal. Hose Clamps Part# A10 MH6 EVA Size *Other sizes and lengths available Type SKU Price 3 8" Pinch " and ½" Worm Part# Size SKU Price N2000-1x2 1" x 2 FT $48.28 N2000-1x3 1" x 3 FT $54.28 N2000-1x4 1" x 4 FT $63.66 N2000-1x5 1" x 5 FT $73.04 N2000-1x6 1" x 6 FT $78.65 N2000-1x8 1" x 8 FT $99.63 N2000-1x10 1" x 10 FT $ N2000-1x12 1" x 12 FT $ N2000-1x14 1" x 14 FT $ N2000-1x15 1" x 15 FT $ N2000-1x16 1" x 16 FT $ N2000-1x20 1" x 20 FT $ N2000-1x24 1" x 24 FT $ N x3 1¼" x 3 FT $ N x5 1¼" x 5 FT $ N x6 1¼" x 6 FT $ N x8 1¼" x 8 FT $ N x12 1¼" x 12 FT $ N x14 1¼" x 14 FT $ N x15 1¼" x 15 FT $ N x16 1¼" x 16 FT $ N x18 1¼" x 18 FT $ N x20 1¼" x 20 FT $ N x12 1½" x 12 FT $ N x14 1½" x 14 FT $ N x16 1½" x 16 FT $ A152 N2595 Stainless Steel Braided Reinforced Anhydrous Ammonia Hose Abrasion resistant hose for the transfer of anhydrous ammonia To be used on agricultural applications with nurse tanks and in riser applications TEMPERATURE RANGE: -40 F to +180 F -40 C to +82 C BURST PRESSURE: Minimum 5:1 MATERIAL TUBE: Extruded and smooth proprietary chlorobutyl (CIIR) compound Specifically designed to resist anhydrous ammonia REINFORCEMENTS: One or more braids of high tensile stainless steel with one textile braid (no textile on 3 inch ID) MATERIAL COVER: Black abrasion and weather resistant neoprene Cover is pin pricked, which promotes better dissipation of the anhydrous ammonia and assists in resisting cover blisters Part# Size N2595-1x2 1" x 2 FT N2595-1x3 1" x 3 FT N2595-1x4 1" x 4 FT N2595-1x5 1" x 5 FT N2595-1x6 1" x 6 FT N2595-1x8 1" x 8 FT N2595-1x10 1" x 10 FT N2595-1x12 1" x 12 FT N2595-1x14 1" x 14 FT N2595-1x15 1" x 15 FT N2595-1x16 1" x 16 FT N2595-1x20 1" x 20 FT *Other sizes and lengths available

155 Pipe Fittings Extra Heavy Duty Fittings For High Pressure Ammonia Service Pipe Size 90 Elbow 90 ST Elbow 45 Elbow Tee Coupling Plug Union ¼ 14X90EHD 14X90SEHD 14X45EHD 14THD 14CFS 14PHD 14UFS 3 8" 38X90EHD 38X90SEHD 38X45EHD 38THD 38CFS 38PHD 38UFS ½" 12X90EHD 12X90SEHD 12X45EHD 12THD 12CFS 12PHD 12UFS ¾" 34X90EHD 34X90SEHD 34X45EHD 34THD 34CFS 34PHD 34UFS 1" 1X90EHD 1X90SEHD 1X45EHD 1THD 1CFS 1PHD 1UFS 1¼" 114X90EHD 114X90SEHD 114X45EHD 114THD 114CFS 114PHD 114UFS 1½" 112X90EHD 112X90SEHD 112X45EHD 112THD 112CFS 112PHD 112UFS 2" 2X90EHD 2X90SEHD 2X45EHD 2THD 2CFS 2PHD 2UFS 3" 3X90EHD 3X45EHD 3THD 3CFS 3PHD 3UFS AMMONIA Forged Steel Hex Bushings MNPT Size FNPT Size ¼" 3 8" ½" ¾" 1" 1¼" 1½" 2" 3" 1 8" 14X18BHD 38X18BHD 12X18BHD 34X18BHD ¼" 38X14BHD 12X14BHD 34X14BHD 1X14BHD 114X14BHD 3 8" 12X38BHD 34X38BHD 1X38BHD 114X38BHD ½" 34X12BHD 1X12BHD 114X12BHD 112X12BHD 2X12BHD 3X12BHD ¾" 1X34BHD 114X34BHD 112X34BHD 2X34BHD 3X34BHD 1" 114X1BHD 112X1BHD 2X1BHD 3X1BHD 1¼" 112X114BHD 2X114BHD 3X114BHD 1½" 2X112BHD 3X112BHD 2" 3X2BHD Extra Heavy Duty Pipe Nipples Nipple Length 1 8" *Call for Other Sizes ¼" 3 8" Pipe Size MNPT ½" ¾" 1" 1¼" 1½" 2" 3" CLOSE 18XCNHD 14XCNHD 38XCNHD 12XCNHD 34XCNHD 1XCNHD 114XCNHD 112XCNHD 2XCNHD 3XCNHD SHORT 18XSNHD 14XSNHD 38XSNHD 12XSNHD 34XSNHD 1XSNHD 114XSNHD 112XSNHD 2XSNHD 3XSNHD 2" 18X2NHD 14X2NHD 38X2NHD 12X2NHD 34X2NHD 1X2NHD 114X2NHD 112X2NHD 3" 18X3NHD 14X3NHD 38X3NHD 12X3NHD 34X3NHD 1X3NHD 114X3NHD 112X3NHD 2X3NHD 3X3NHD 4" 18X4NHD 14X4NHD 38X4NHD 12X4NHD 34X4NHD 1X4NHD 114X4NHD 112X4NHD 2X4NHD 3X4NHD 5" 18X5NHD 14X5NHD 38X5NHD 12X5NHD 34X5NHD 1X5NHD 114X5NHD 112X5NHD 2X5NHD 3X5NHD 6" 18X6NHD 14X6NHD 38X6NHD 12X6NHD 34X6NHD 1X6NHD 114X6NHD 112X6NHD 2X6NHD 3X6NHD 8" 18X8NHD 14X8NHD 38X8NHD 12X8NHD 34X8NHD 1X8NHD 114X8NHD 112X8NHD 2X8NHD 3X8NHD 10" 18X10NHD 14X10NHD 38X10NHD 12X10NHD 34X10NHD 1X10NHD 114X10NHD 112X10NHD 2X10NHD 3X10NHD 12" 18X12NHD 14X12NHD 38X12NHD 12X12NHD 34X12NHD 1X12NHD 114X12NHD 112X12NHD 2X12NHD 3X12NHD A153

156 Pipe Fittings & Accessories Forged Steel Reducer Couplings AMMONIA Pipe Size FPT ½" ¾" FPT Size 1" 1¼" 1½" 2" 3" ¼" 12X14RHD 34X14RHD ½" 34X12RHD 1X12RHD ¾" 1X34RHD 114X34RHD 1" 114X1RHD 112X1RHD 2X1RHD 1¼" 112X114RHD 2X114RHD 1½" 2X112RHD 2" 3X2RHD Extra Heavy Swage Nipples Part# Size 1X34SWNHD 1" X ¾" 114X1SWNHD 1¼" X 1" 112X114SWN 1½" X 1¼" 2X1SWNHD 2" X 1" 2X114SWNHD 2" X 1¼" 2X112SWNHD 2" X 1½" 3X2SWNHD 3" X 2" 3X212SWNHD 3" X 2½" Ductile Iron In Line Strainer High pressure in line strainer is perfect for protecting pumps. Part# Size SKU Price ME650S ½" $44.01 ME651S ¾" $49.20 ME652S 1" $78.45 ME653S 1¼" $82.14 ME654S 1½" $ ME655S 2" $ ME656S 3" $ A154

157 NH3 Plumbing Accessories Jomar Teflon Pipe Sealant Jomar thread sealant with teflon is ideal for all your plumbing projects. Available in 1/4 pint cans. Part# SKU Price $5.11 Leak Detector Solution for Ammonia This low temperature leak detector solution is ideal for checking leaks in ammonia piping systems. LD1 8 oz $5.18 LD2 1 Gallon 1544 $ BO 8 Pint 0614 $ BTL 16oz. Trigger Bottle Only 0330 $3.66 AMMONIA PLS#2 John Crane Pipe Sealant John Crane Pipe Sealant is ideal for those tough plumbing projects. Part# SKU Price 1#-NO $ #-NO $57.09 Teflon Thread Tape Premium thread tape is thick and easy to use Permits easy disassembly even after many years Yellow in color Part# Description Size SKU Price ATY " Roll ½" 0298 $3.31 ATY " Roll ¾" 0425 $4.72 ATY " Roll 1" 0554 $6.15 Rectorseal Pipe Sealant This pipe thread sealant is a non-setting, multipurpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Part# Size SKU Price #5-14 ¼ pt $8.43 #5-12 ½ pt $12.53 #5-1 1 pt $ T Plus 2 Sealant 0711 $7.89 Valve Locking Caps Valve locking caps prevent tampering with tank valves by unauthorized personnel. It is easily installed by removing the valve handwheel and placing Valve-Lok over the stem and replacing the handwheel. VAL2 Fits ¾" to 2" Valves 2285 $25.39 VAL3 Fits 3" Valves 3566 $39.62 A155

158 Shanks One-Hole Shanks 1¼" Square coil shank. Mounting hole is 11/16". This shank requires knife side-plate brackets. A C B Three-Hole Footed Shanks 1¼" Square coil shank. Top mounting hole is 13/16". 17/32" holes spaced at 2¾" allow A side mount knife to be C bolted directly to foot without use of knife side-plate brackets. B AMMONIA Part# A B C SKU Price KSC90 11¾" 16" 21¾" 8072 $89.67 KSC94 13½" 14¼" 24" 8072 $89.67 KSC97 13½" 18½" 23½" 8072 $89.67 Part# A B C SKU Price KSC95 13" 20" 25¼" 7582 $84.23 KSC96 11¼" 20" 23¼" 7745 $86.05 B Universal Stubby Spring Shanks 1¼" stubby square coil shank has no mounting holes. This shank requires knife side-plate brackets. Part# A B C SKU Price A C B Livewire Shanks Vibrating action and high clearance help shed trash. Used on toolbars and disc conversion kits. Available in ¾" and 1" dia. with hard surface or chromium insert. A KSC92 12" 17¾" 23" 8235 $91.49 Part# A B C SKU Price KSC93 12" 16" 23¼" 8235 $91.49 KSS-25I 25" 5 1 8" ¾" 9242 $ Twisted Shanks A C B KSS-1 SKU 3279 Price $36.43 BL-1 Back up leaf SKU 1139 Price $12.65 WS SKU 2296 Price $25.51 Three-Hole Front Mount Shanks 1¼" Square coil shank. Top mounting hole is 11 16". ½" holes spaced at 1¼" allows direct mounting of front mount knife. This shank does not require knife side-plate brackets. Part# A B C SKU Price KSC91 13½" 20" 24¾" 8560 $95.10 WC-BL Clamp for Backup SKU 1636 Price $18.18 WK SKU 2555 Price $28.39 A156

159 Ammonia Knives Wiese Knife For Field Cultivators Thin Profile Wiese Knives for Chisel Plows Available Hardsurfaced and with CI-6 Chromium Carbide Insert Thin profile anhydrous knife for field cultivators 7 16" or 3 8" punchings on 1½" to 2¼" centers. Use 1¾" length #3 plow head bolts. Part# SKU Price DT4W/CI $33.00 Super Sealer Knife Front swept Super Sealer knife with Chrome insert and 3 8 tube. Part# SKU Price A50SS104X 2908 $32.31 Chisel Plow Knife for Applying NH3 The 2" width at the top icovers the shanks, with ribs that fit on the sides to eliminate twisting. Over-all length only 12". Hole punching ½", 2¼" - 2½" center to center. Part# SKU Price CP $32.45 AMMONIA Blue Jet Shank 1" x 2" side bolt shank Part# SKU Price KSC $46.78 Front Swept Knives For side mount (Clamp On) Applicator Shanks Knives with universal punching to fit most side mount (clamp-on) applicator shanks. Knives available with one-hole and slot or twohole and slot. To fit Blue Jet, John Blue, Clark, M&W, DMI and most others. Tubed for either hot or cold systems. X-series knives" have forged tube protectors, to prolong tube life, and foot, to improve sealing. Tube protectors channel extends five inches up the back of the knife. Several chrome carbide inserts are available for most Wiese fertilizer knives. Chrome carbide inserts will in most cases increase knife life 2 to 3 times. Thin Profile Chisel Plow Knife ½" punching on 2¼" centers. CI-4 Chromium Insert Use #3 plow head bolt ½" x 2½" hex head bolts. Part# SKU Price CP-70w/CI $34.16 Part# SKU Price A50SKW/CI $39.03 Part# SKU Price A50SKDT-3/ $55.23 A157

160 Ammonia Knives & ShieldAg Arms Fairbank Ammonia Knife The Fairbank Equipment knife features a chromium carbide insert and tube protector. Unique open end tube with diverter allows excellent flow without plugging. A high quality knife at an economical price! MAG-50 Knife with Sealer This heavy duty knife includes a sealer for better performance in a variety of soil conditions. AMMONIA OS2532 Knife 2553 $28.36 OS2532BT with Sealer 2881 $32.01 Beaver Tail Sealers These forged beaver tail sealers are 3" x 3". Install 3" to 4" above tube outlet and angle slightly downward for efficient sealing. Part# SKU Price ASW $4.82 MAG-50 Universal Knife 2428 $26.98 MAG-50BTS with Sealer 2636 $29.29 Deep Furrow Knives These deep furrow knives are ideal for subsoiling and aeriation. They work efficiently in any kind of soil and pull up to 15% easier than standard ammonia knives. DF-1 Knife 3429 $38.10 Wiese Replacement Ammonia Tube Replacement 3 8" Knife tube is drilled and pinched. Overall length is 12" Part# SKU Price WRT 0225 $2.50 Chisel Plow Knives C34AN ¾" Chisel Plow Knife 2616 $29.06 C34AN-1/2 ¾" Chisel with ½" Tubre 2901 $ " Coulter Arm 4" Vertical Travel Up to 800# down pressure Heavy Duty 1¾" diameter mounting bar Equipped with 20 diameter smooth blade Uses common N633 hub and spindle Fluted, Crucible and notched blades available Bar mounts available for any size tool bar Part# SKU Price KSC $ A158 20" Liquid Coulter Arm Shown with K-5S chrome liquid knife Fluted, crucible and notched blades available 4" Vertical Travel Equipped with 20 diameter smooth blade Up to 800# down pressure Heavy duty 1¾" diameter mounting bar Uses common N633 hub and spindle Bar mounts available for any size toolbar KSC Coulter Assy $ K5SBSST Knife $ PLCLT 20" Smooth disc $ FLCLT 20" Fluted disc $46.89

161 Bolt-on Anhydrous Tubes Ray-Mac Tubes Self cleaning port for continuous flow CP1-3/8 Chisel Tube 3 8" 0839 $9.32 FC1-3/8 Field Cultivator Tube 3 8" 0780 $8.67 AMMONIA Inline Chisel plow pipe and bracket. Punched to fit behind standard chisel shanks. Part# SKU Price TB $10.42 Offset Chisel plow pipe and bracket to fit original chisel plow spikes. Universally punched for chisel shanks. Part# SKU Price HPB $7.17 Offset Cultivator Pipe Part# SKU Price FPB $8.24 5' NH3 Sweep Tube Includes one sweep tube strap for attachment. Sweep Tubes for 5' and 5½' Sweep Formed, with attaching brackets. Two outlet holes for each side of blade. Install under sweep blades, using exiting bolts. (May require extra length bolts, not included.) Part# SKU Price 5ST 9074 $ Sweep Tubes for 6', 6½' and 7' Sweep Formed with attaching brackets. Three outlet holes for each side of blade. Install under sweep blades, using existing holes. (May require extra length bolts, not included.) Part# SKU Price 6ST 9708 $ Combination Liquid and NH3 tubes also available. A159

162 Safety & Water Containers AMMONIA P&H 76410P Top Mount 5 Gal $60.80 AG Systems AG-40 Top Mount 5 Gal $67.56 AG Systems Parts AG-1 Lid, Screw On 0141 $1.57 P&H Side Mount 5 Gal $49.08 A1234 Straight Barb EL Hose Barb X116SCV Clear Hose /ft. AG Systems Safety Kit AG-41 Safety Container 3571 $39.67 (Gloves and goggles not included) P&H Safety Container 4265 $47.38 (Gloves and goggles not included) Glove & Goggle Pouch Soft sided glove and 1687 $18.74 goggle puch Rotovac Parts Push on Lid 0127 $ x116SCV Clear VInyl Hose ½" /ft. A3812 Straight Hose Barb EL Hose Barb Hose Fitting Washer Band Spring 0300 $ Hose Fitting Nut P&H Parts Lid, Screw on Style 0277 $ SCV Clear Hose 5 8" /ft Lid, Push on (Old Style) 0207 $ Band 1047 $ Spring Kit 1047 $11.63 A160

163 Safety Equipment Goggles 552 Non-Vented NH3 goggles 0258 $ F Non-Vented Fogless NH $ Indirectly vented goggles 0440 $ Fog Free Smoked Goggles 0707 $ Indirectly Vented Large Goggles 0566 $ Indirectly Vented Goggles for Glasses 0990 $ Goggles with Face Shield 2182 $24.24 AMMONIA MSA Respirator Comfo II Respirator 5433 $ Cartridge (2 Required) 1200 $13.33 MSA Gas Mask Gas Mask $ Cannister $87.38 D Case with MSA $86.00 Edmont Willson Rainsuit L Large 1245 $ XL XL 1277 $14.19 Ammonia Gloves Best Anhydrous gloves are heavy duty lined gloves. Available in 12" or 14" lengths. 7712R 12" Length 0348 $ R 14" Length 0381 $ XL NH $7.58 A161

164 Schuck Hitches Schuck Cushion Hitches are your first stop for all of your towing equipment needs. Our powder coated cushion hitches are the superior choice over other standard receiver hitches like the Reese Hitch. We can handle all of your towing accessories from trailer hitches, truck hitches, trailer hitch cover and even marine towing, motorcycle trailer hitches and tractor hitches. You will find increased performance, reduced wear on your vehicle and reduced driver fatigue. Schuck Cushion Hitches are engineered to absorb minor or major tongue thrust shocks from towing loads off road or on the highway. The innovative design of each hitch contains injection-molded urethane cushions to absorb end thrust shock and high density polyethane bearings to increase tongue loads. There is no metal-to-metal contact, which translates into a smoother and quieter ride. This unique design is built for years of service, and is virtually maintenance-free. AMMONIA Model 740 Fits standard 2" receiver Includes pin and keeper 2½" drop from center of the receiver tube to the top of the hitch tongue SKU Price $ Model 750 The model 750 hitch has a bolt-on swivel hitch with mounting bolts and stiffening braces that are included. It fits 10 ½" - 12" on center bolt pattern. The swivel tongue extends 7" beyond the TOW position and swivels 60 laterally or 12" left to right. The swivel tongue saves time and effort with every hook-up. SKU Price $ Model 750-RT Fits standard 2" receiver Includes pin and keeper Check these dimensions! The center of the receiver tube to the top of hitch tongue is a 5 ½" drop. Swivel tongue extends 7" beyond the TOW position and swivels 60 laterally (or 12" left to right) Swivel tongue saves time and effort with every hook-up. Note: For tongue height, we recommend 16" to 18" off the ground. Measure from the center of your receiver tube to the ground and subtract the 5-1/2" drop. SKU Price $ Model 750-RT-R Fits standard 2" receiver Can be made with 2.5 shank. Includes pin and keeper Less hitch height drop! The center of the receiver tube to the top of hitch tongue is a 3½" drop. It's ideal for ½, ¾ and 1 ton pickup trucks or tow vehicles where a 2" higher hitch is required. Swivel tongue extends 7" beyond the TOW position and swivels 60 laterally (or 12" left to right). Note: For tongue height, we recommend 16" to 18" off the ground. Measure from the center of your receiver tube to the ground and subtract the 3-1/2" drop. SKU Price $ A162

165 Bulldog Jacks & Hitch Pins Replacement Parts /8" Pull Pin 3.5" Long with Chain TW Crank Assembly Swivel Retaining Ring If you want a jack you can rely on, choose Bulldog s line of screw jacks. With easy cranking 8 turns per inch, they have proven reliability for long term use at rated loads. TJB-2001-B TJP-2002-B TJD7000S Part# Lift Capacity Handle Mounting SKU Price TJB-2001-B 2,000 Topwind Ring 3119 $34.65 TJP-2002-B 2,000 Topwind Tube 3979 $44.21 SWS151DS 2,000 Sidewind Ring 6902 $76.68 TWS171DS 5,000 Sidewind Ring 7382 $82.01 TWL178DTSF 5,000 Topwind Tube 9689 $ TJD7000S 7,000 Sidewind (not included) 5299 $58.87 TJD7000S Weld on Tubing Options ½" Female 1468 $ ½" Male 0988 $10.98 AMMONIA ½" Plunger Assembly L Bend Swivel Bracket Hope Haven Hitch Pins Double H Hitch pins provide an excellent quality hitch pin at a reasonable cost. Black hitch pin with red plastic covered handle. Part# Size SKU Price H58 5 8" x 6" 0424 $4.71 H34 3 4" x 6" 0488 $5.42 H78 7 8" x 6" 0597 $6.63 H100 1" x 6" 0807 $8.97 H " x 6" 1406 $15.62 Wilson Hitch Pins Wilson Mfg hitch pins are a high quality yet economical hitch pin. Silver in color. Part# Size SKU Price RP " x 6" 0460 $5.11 RP " x 6" 0594 $6.60 RP " x 6" 0710 $7.89 Safety Chains Part# SKU Price $55.37 Hairpin Clip Part# SKU Price #9 Clip A163

166 Excess Flow & Back Check Valves AMMONIA Heavy Duty Swing Check with Flow Indicator This back check valve is designed to provide required back flow protection for the unloading riser in the bulk plant s transfer area. It is designed specifically for pipeline installation and is suitable for LP-Gas and Anhydrous Ammonia service. Product flow moves the swing check to the open position, when flow stops the spring loaded swing check closes. Part# Connection Liquid Capacity at 10 PSIG Drop GPM SKU Price A F-NPT 640-GPM $ A F-NPT 1,173-GPM $1, RegO Flow Check Valve The RegO Flow Check Valve has a sight glass to allow viewing of the product flow. It also incorporates a back check valve that permits product to flow only in one direction. Part# Size SKU Price A7794 2" $ A7796 3" $1, " RegO Back Check Valves Designed to provide protection of a container opening when desired flow is always into the vessel. May be used in line applications where flow must be limited to one direction. 3" Features Easy to read flow indicator Heavy duty spring loaded swing check design Resilient synthetic rubber seat disc High flow rates with low pressure drop May be installed either horizontally or vertically ¼ F-NPT plugged boss on top of body Materials Body... Ductile Iron Stem... Stainless Steel Seat...Stainless Steel Seat Disc... Resilient synthetic rubber Return Spring...Stainless Steel Part# Connection SKU Price A3146 ¾" $66.94 A3176 1¼" $74.66 A3186 2" $ A3196 3" $ Corken Flo-Check Valve The Flo-Check enables you to detect flow in the gas or liquid lines and prevents release of product in the event of a hose failure. Flow indicating and back-check valves feature all ductile iron construction and are available in 1¼" through 3" NPT. Part# Size SKU Price FC-200 2" $ FC-300 3" $ Squibb Excess Flow Valves Part# Connection Approximate Closing Flow GPM SKU Price ¼" $ " $ " $ A164

167 Blackmer Ammonia Pumps Blackmer 2" & 3" Pumps Blackmer 2" and 3" pumps are ideal for use at an anhydrous ammonia storage plant. They offer dependable service and have extended life duravanes for peak performance. These pumps have 2" threaded inlet and outlet flanges for easy installation and removal from piping systems. Blackmer LGLD3E Pumps are typically used at a storage facility mounted on a base with an electric motor. All 2" & 3" pumps have an internal safety relief valve, and a replaceable casing liner and end discs for easy rebuilding of the pumping chamber if ever necessary. Model# LGLD2E-103 LGLD3E-103 Pump Speed GPM at 50PSI Differential GPM at 100PSI Differential Max Differential Pressure Motor HP 150 5hp hp AMMONIA Pump Only: LGLD3E, LGLD2E Mulit-Purpose Ammonia Pump for Bulk Plants & Termials-3" Pump Based on Blackmer s industry standard LGLD3 transfer pump, the LGL3021 replaces competitive pumps without changing piping connections or motor drives. Whether filling an LPG bobtail or transport the LGL3021 can do it faster and more efficiently than competitive models FEATURES Designed for high differential pressure of 150 PSI Sliding vane, positive displacement design for consistent performance Designed to bolt in place of competitive pumps without changing piping or motor drives Cavitation suppression liner Replaceable liner and discs Ductile iron construction Factory ISO-9001 certified APPLICATIONS Bulk plant service Multiple Cylinder filling Vaporizers Bobtail and transport loading & off-loading U.L. listed for use on propane, butane, butane/ propane mixes and anhydrous ammonia LG3021 Max Speed GPM(L/min) HP(kW) Max Differential Pressure Recommended Bypass Valve Setting Relief Valve Setting Max Working Pressure 800RPM 112(424) 12.1(9.0) 150PSI 125PSI 150PSI 350PSI A165

168 Corken Ammonia Pumps Corken Coro-Vane Pumps Only Corken Coro-Vane pumps have heavy duty roller bearings for longer service life. The bearings are interchangeable in all sizes of Coro-Vane pumps. All parts, including the hydraulically self-adjusting blades, are easily accessible for inspection or replacement without disturbing the piping. AMMONIA Models 521 and 1021 have built-in internal relief valve for added safety. Flanges of ductile iron save money by eliminating pipe unions and also simplify installation. Steel slip on welding flanges also available. OPERATING SPECIFICATIONS Model# F1021 Z3500 RPM Range Temperature Range -25 F to 225 F Max Working Pressure PSIG Max Differential Pressue PSID Max Driver Size HP Flow Rang GPM FLANGE OPTIONS Model# Standard No Cost Option Extra Cost Option Inlet 2½" NPT 2" NPT 2", 2½" Weld Flange 521 Outlet 2" NPT 1½", 2½" NPT 1½", 2", 2½" Weld Flange Inlet 3" NPT 4" NPT 3", 4" Weld Flange 1021 Outlet 3" NPT 4" NPT 3", 4" Weld Flange Inlet 3" 300# ANSI F1021 Outlet 2½" 300# ANSI Inlet 3" NPT 4" NPT 3", 4" Weld Flange Z3500 Outlet 3" NPT Elongated -- 3" Weld Flange Elongated Corken ZV200 Bypass Valve 1¼" valve for use on 2" pumps, 2" valve for use on 3" and 4" pumps. T166 Bypass Valve Bypass valve protects the pump when outlet flow is restricted. Available in 1¼" and 1½". A166

169 Corken Ammonia Pumps Features and Benefits Up to 7% or more capacity at 640 RPM. Large diameter non-metallic pins are not speed sensitive so you can operate the pump at a higher RPM and not damage the pump. High tech materials used on the cam and blades help extend the life of the pump. Unlike other two and three inch stationary pumps rated at 640 RPM, the Z2000 and Z3500 is rated up to 800 RPM providing higher capacity without damage. Maintenance is made simple. When it becomes necessary to service the pump, all you need to do is remove twelve head bolts to inspect the bearings, seals, side plates, rotor, vanes and vane drivers. Retrofits the Corken stationary pump and other competitive pumps with little or no change in piping. Z2000 2" Pump The 2" Z2000 pump was designed for stationary storage tank applications.the Z2000 stationary pump has the same locked rotor design used in the Corken Z-Series truck pumps to ensure long pump life and excellent performance. With higher flow rates than other three-inch pumps, the Z2000 retrofits Corken s and other competitive pumps with little or no change in piping. AMMONIA Z3500 3" NH3 Pump The new 3" Z3500 NH3 pump was designed for stationary ammonia plant applications. The Z3500 stationary pump has the same locked rotor design used in the Corken Z-Series truck pumps to ensure long pump life and excellent performance. With higher flow rates than other three-inch pumps, the Z3500 retrofits Corken s and other competitive pumps with little or no change in piping. If you want to fill your nurse tanks quickly, the Z3500 is the one! Z3500 pump only Z pump mounted on base-ready to accept motor Z4500 4" Stationary Pump The Z4500 is a 4" stationary pump designed for transport loading and multiple bobtail loading applications. If you have two or more bulkheads to load bobtails and transports and would like to shorten your fill times, then the Z4500 is the stationary pump for you. The Z4500 can fill two 3,000 gallon bobtails in 20 minutes or less at typical operating RPMs. Z4500 pump only Z pump mounted on base-ready to accept motor A167

170 Compressors AMMONIA Corken Compressors Compressors recover valuable residual vapors in tanks that pumps are unable to capture. Non-lubricated cylinder and piston design permits Corken compressors to operate without lubrication of any kind in the compression cylinders. Since no oil is consumed in the compression process, oil cannot contaminate the product. Spring loaded TFE piston rod seals compensate for wear and temperature variations. The seals minimize gas leaking into the crankcase. Crankshafts have integral, balanced counterweights for smoother operation. Oversized roller bearings on the crankshaft absorb radial and thrust loads, and they can be easily adjusted from an external position. Compressor Model Number 290/ /491 RPM Motor Horse Capacity Piping Size* Minimum Hose Size Power GPM CFM Liquid Vapor Liquid Vapor ½" 1" 1¼" 1" " 1¼" 1½" 1¼" ½" 1¼" 1½" 1¼" " 1¼" 1½" 1¼" " 1¼" 1½" 1¼" " 1¼" 1½" 1¼" " 1¼" 2" x Two 2" Capacity will vary depending upon length of piping and hoses. * Use next larger pipe size if piping is complex or over 100' in length. Blackmer Compressors A168 Use 30W Oil Only

171 Rego Valves RegO Excess Flow Valves Designed for liquid or vapor use for filling, withdrawal and vapor equalizing in container or line applications. They are intended for long lines or branch piping where tank mounted excess flow valves are inadequate. Part# Connection SKU Price A3272G ¾" $68.38 A3282C 1¼" $68.38 A3292C 2" $ RegO Excess Flow Valves These excess flow valves are designed for container installations for mounting in threaded full or half couplings. They may be used for filling, withdrawal or vapor equalizing applications. The exceptionally low pressure drop makes them ideal for pump suction lines. If a riser pipe to the vapor space is used with these valves, the minimum inside diameter of the riser pipe must be at least two times the thread size in order not to restrict the flow to the side ports. AMMONIA Part# Coupling Size SKU Price A7537P4 Half 2" $ A7537P4F Full 2" $ A7539V6 Half 3" $ RegO Internal Valves Designed for liquid withdrawal, vapor transfer or vapor equalization of transports and stationary storage tanks. The valve incorporates a built in excess flow valve and may be operated manually by cable or pneumatically. Closing flow shown is for half coupling. Closing flow for full coupling could be as low as one half this amount. Please call for specific closing rates. Part# Closing Flow Size SKU Price A3212R gpm 2" $ A3213R gpm 3" $ A3213R gpm 3" $ Thermal latch kit A3213TL Pneumatic Actuator A3213PA Rotary Actuator A3213RA A169

172 SPEED PULLING MAXIMUM FILL VALVE HOSE BLEED LIQUID OUT PRESSURE TO REGULATOR GAUGE HOSE VALVE TRANSFER INSTRUCTIONS A. To Fill Applicator Tank (Not applicable where transfer pumps are used.) 1. Check hose and valve connections for dirt, and valves for connection seal washers. Connect fill hose (hand tight only) to applicator fill valve (1). 2. Be sure hose bleed is closed - then open valves (1), (2), (3) & (4) in succession. Note: Valve (1) automatically opens and closes on some applicators. 3. Maintain not over lbs. lower pressure in applicator by adjusting vapor valve or bleed (3)-- fill applicator to only 85% as shown by spewing of liquid ammonia from vapor or bleed (3). 4. Immediately close valve (4)-- after 30 seconds close valves (3), (2) & (1) in this order SAFETY VALVE LIQUID OUT VALVE VAPOR VALVE OR BLEED NOTE: Valves May Be Combined or Arranged Differently SUPPLY TANK APPLICATION INSTRUCTIONS 1. Set regulator, according to make, for desired output, swath, tractor speed, etc. 2. Start tractor moving - drop knives to desired depth and turn on NH3. 3. Maintain constant speed - shut off NH3 one tractor length from row end - lift knives before turning. 4. Periodically check to be sure correct amount of ammonia has been applied for acreage covered. 5. Periodically check knife hoses for frosting which indicates full flow. 6. Adjust regulator as necessary and clean strainers according to instructions. B. To Disconnect Hose (Not applicable where transfer pumps are used.) FIRST AID SUGGESTIONS 1. Open hose bleed - BE SURE HOLE IS AWAY FROM YOU- and allow to empty. LARGE VOLUMES OF FRESH WATER CONSTITUTE THE 2. Disconnect hose from applicator tank - replace protective cap. BASIC FIRST AID TREATMENT FOR AMMONIA BURNS. 3. Carefully rack hose on supply tank to avoid kinking and dragging on ground. SKIN CONTACT A. Immediately flood affected area with water. B. Remove af- SAFETY SUGGESTIONS FOR fected clothing. C. Reflood and leave affected skin open to air. AMMONIA HANDLING EYE CONTACT Use only approved ammonia equipment in first-class condition. Immediately flood eye with abundance of fresh water for at Call your dealer immediately in case of leaks, malfunction or least 15 minutes and repeat. exceptional wear. MOUTH & THROAT CONTACT Do not tamper with valves or equipment except as instructed. Rinse, gargle and drink large quantities of water or lemonade. Stay upwind when filling. Sniff, don't breathe deeply when VAPOR CONTACT WITH LUNGS approaching area. Move to fresh air. Avoid violent or unskilled artificial respiration. Ammonia gloves and goggles should be worn when transferr- INTERNAL CONTACT ing ammonia. Neutralize ammonia with abundance of vinegar or lemon juice. Keep out of a direct line from openings on all valves and Follow with raw eggs, cream or olive oil to protect tissues. fittings. Before removing hoses or parts, be positive all pressure is SEE PHYSICIAN IN ALL SEVERE out of the system. Never pick up a hose by the valve hand wheel nor allow valve CASES OF AMMONIA BURNS contact with ground. NH3 IS SAFE IF HANDLED PROPERLY Safety Decals Decal Sets by State STATE PART# Kansas FB-DECAL-PKG-KS Nebraska FB-DECAL-PKG-NE Oklahoma FB-DECAL-PKG-OK Colorado FB-DECAL-PKG-CO Custom Decal s Available, Fax Your Request for a Quote. Your Company Name Emergency Phone Number AMMONIA EMERGENCY FIRST AID SHOULD LIQUID OR VAPORS OF THIS PRODUCT COME IN CONTACT WITH EYES OR SKIN-- 1. FLUSH AFFECTED AREA THOROUGHLY WITH WATER FOR 15 MINUTES. 2. REMOVE IMMEDIATELY ANY CONTAMINATED CLOTHING. 3. DO NOT APPLY SALVES OR OINTMENTS TO BURNS. GET TO DOCTOR AS SOON AS POSSIBLE. CAUTION ANHYDROUS AMMONIA (Under Pressure) READ CAREFULLY Requirements Per Nurse Tank By State Part No. Kansas Nebraska Oklahoma Colorado WFAD KEEP AWAY FROM POP-OFF VALVE MARKED THIS IS A SAFETY DEVICE AND SHOULD NOT BE TAMPERED WITH OR ADJUSTED. 2. STAND "UP WIND" WHEN WORKING AROUND EQUIPMENT. 3. WEAR GOGGLES AND RUBBER GLOVES WHEN TRANSFERRING PRODUCT AND "BLEEDING HOSES." 4. WEAR GOGGLES AND RUBBER GLOVES WHEN TRANSFERRING PRODUCT AND "BLEEDING HOSES." 5. NEVER USE VALVE HANDWHEEL AS A HOSE HANDLE. 6. BLEED HOSE END VALVES BEFORE STARTING TO DISCONNECT. LIQUID VAPOR 7. CLOSE VALVE FIRMLY BUT DO NOT USE WRENCH OR PLIERS. 8. DO NOT PERMIT CHILDREN NEAR THIS EQUIPMENT. 9. PARK EQUIPMENT AWAY FROM BUILDINGS OR ANY POSSIBILE FIRE HAZARDS. NEVER ALLOWTANKS TO BE SUBJECTED TO EXTREME HEAT. 10. DO NOT ATTEMPT ANY REPAIRS OF THIS EQUIPMENT. IN EVENT OF ANY FAILURE CALL YOUR DEALER IMMEDIATELY. 11. DO NOT OPERATE THIS EQUIPMENT UNTIL YOU HAVE RECEIVED INSTRUCTIONS FROM YOUIR DEALER. NH3S-R NH3C-R SLD SVD ANHYDROUS AMMONIA ANHYDROUS AMMONIA INHALATION HAZARD 25 M.P.H. IH NH MPH WEAR YOUR O LES Pulling Vehicle Responsible FAWD WYG FIRST AID WATER 2FS V FILL HOSE 2 4 APPLICATOR TANK 3 Also available in steel, part no. #2 Steel NFPA NH3 Storage Plant Decal See last page of Ammonia section for Nurse Tank Decal layout. A170

173 Pulling Vehicle Responsible Ammonia Nurse Tank Decals AMMONIA TANK FRONT TANK BACK 2 2 ANHYDROUS 12 MAXIMUM PULLING SPEED 25 M.P.H. AMMONIA 14 OPTIONAL SMV EMBLEM ANHYDROUS 12 AMMONIA 1. Safety Water Container & Decal (5 gallons, fresh & clean) 2. Anhydrous Ammonia-Curved 4" Letters Front and Rear 3. Anhydrous Ammonia-Straight 4" Letters on Both Sides 4. Warning First Aid Decal with Relief Valve Arrow 5. Safety Relief Valve with Protective Cap 6. Vapor and Liquid Valves 7. Vapor and Liquid Markings (labeled or color coded) 8. Owner Identification (Minimum 2" letters) 9. Tank Identification Number 10. Pressure Gauge (must be operational) 11. Roll Bar and Relief Valve Guard DOT Placard on all Four Sides 13. Inhalation Hazard Decal (minimum 2") 14. Max Speed 25MPH Decal 15. Wear Your Goggles Decal A171

174 Klinger Quality Paint SPECIALTY White Silicone Super White Tank Paint You will not believe the gloss on this silicone SuperWhite Tank Paint. Although it is a few bucks more, it is worth it to have better looking tanks that do not require painting for a long time. Available in one gallon cans (four gallons to a case), in five gallon buckets and in aerosol cans. Use Mineral Spirits to thin White Tank Enamel Are you ready for a white tank enamel that has a high gloss and lasts a long time? Klinger s white tank enamel is specially formulated to cover in one easy coat. You will definitely need to have your sunglasses handy after you use this paint! Use Mineral Spirits to thin. Available in one gallon cans, (four gallons to a case) in five gallon buckets and aerosol cans. 130-TA Aluminum Tank Paint Klinger s aluminum tank paint is long lasting and covers better than a blanket! If you have used other aluminum paint that is runny and watered down, quit wasting your time and make the switch to Klingers. Use Mineral Spirits to thin. Available in one gallon cans (four gallons to a case) or in five gallon buckets Fast Dry Gray Primer has a recoat (drying) time of 30 minutes, brush, roll or spray. Available in gallons or 5 gallon. Use Xylol Thinner Gray Primer has an 8-12 hour recoat time brush, spray or roll. Use mineral spirits as a thinner. Thinners Mineral Spirits Thinner is used in the majority of Klinger Paints. Xylol Thinner is used to thin the fast dry primer. A172

175 ITEM PAGE Bandit Chippers & Stump Grinders... S185 Custom Sprayers... S175 DEF Transfer System... S184 Diaphragm Pump Breakdowns (Hypro)... S182-S183 Hannay Hose Reel... S178 Honda Motors.... S174 John Bean... S179-S181 Roadside Weed & Turf... S176-S179 Root Feeders... S174 Spot Sprayer.... S177 Spray Guns.... S178 Sprayers (lawn & garden)... S176 Wylie Sprayer... S177 SPECIALTY SPECIALTY S173

176 Honda Packages & Root Feeders Surface Root Feeders Surface root feeder for feeding liquids, field proven. Fits JD9 gun, allows precise metered dosages of application material. Fits your JD9 and JD9-CT spray guns for greater field convenience Crafted of tough but lightweight aluminum Ruggedly built with tully replaceable parts for a lifetime of use Choice of two models: floppy plate or cup style shield Optional Surface Feeder with Cup Style Shield $ Green Garde Root Feeder $ SPECIALTY Honda Motors GX160K1QX2 5.5hp Recoil Start $ GX270K1QAE2 9hp Electric Start $1, GX39OU1QNE2 13hp Electric start $1, Shown with electric start Hypro Diaphragm Honda Pump Package Part# Descriptions SKU Price FB-9203C-H GX270 Honda with belt driven 9203C Hypro Centrifugal pump $1, Hypro Honda Pump Package Part# Descriptions Price 9910-D30GRGI GX160 Honda/D30 Hypro with Relief $1, Call for pricing on the complete line of Honda Engines and Authentic Honda Parts. S174

177 Custom Sprayers Weed Department Sprayers Fairbank Equipment has the experience to custom designing a spray system for all your needs. Our shop can install whatever is on your wish list. Come in or give us a call and let our years of experience help you design exactly what system works for your needs. Features Hypro 9203C Centrifugal Pump w/ 9hp Honda Engine and electric start 300ft. of 1/2" 800psi spray hose Hannay hose real (Red) 300 Gallon Poly Tank on Skid Penberth y Eductor Agitation JD9 Spray Gun 5 Gallon Chemical Inductor 25 Gallon Spot Sprayer PWZ Hose Reel (Black) Raven 440 Rate Controler SPECIALTY Features Stainless Steel John Bean Sprayer Raven Controller RAM cab mount Features Hypro diaphragm pump 5.5 Honda Engine 100ft. of 1/2" 800psi spray hose Hannay hose real 150 Gallon Poly Tank on Skid Penberth y Eductor Agitation JD9 Spray Gun Call for custom options and pricing! S175

178 Lawn & Garden Sprayers Hudson NeverPump Bak-Pak Sprayer Sprays for 10 hours on a single battery charge. 72" PVC power sprayer-style hose Includes AC charger, completely charges battery in 9 hours Extra long 20" poly spray wand Extra large fill opening prevents spills when adding chemical Includes 4 different nozzles Chemical-resistant straps with adjustable pads Gallons / 15 Liter $ SPECIALTY Biologic Hand Held Compressed Air Sprayer Multiple nozzles to distinguish spray pattern or volume of spray Translucent Poly Tank Large opening for easy filling and cleaning Pressure relief valve Poly shut-off with lock-off feature Viton seals Part# Description Gallons Premier Stainless Steel Sprayer Brass extension Funnel top to help with filling or pouring Lock-On feature Brass spray handle, want and nozzle Viton seals Part# Description Price Gallons $ ProSeries Backpack Sprayer 3 stage filtration system Wide opening with strainer/filter basket Padded shoulder straps 3 pc nozzle pack (fan, cone, adjustable brass) Piston pump Part# Description Price Gallons $92.75 S176 Premier Steel Sprayer TriPoxy coated metal tank Anti-clog filter 12" brass wand, adjustable nozzle Funnel top for easy filling Part# Description Gallon Fairbank Spot Sprayer Part# Desc. Price FB-15-SPRAYER 15 Gallon $ FB-25-SPRAYER 25 Gallon $195.00

179 Sprayers Wylie Spray Systems These WYLIE sprayers are designed for use with ATV's or small tractors. Sized for small farms, landscapers and turf fields. Combine the versatility of a utility vehicle with the quality of the Wylie Sprayer for a spray unit ideal for turf, small trees, and small pastures. Call for a complete listing of all Wylie sprayers and options. SPECIALTY Custom Spot Sprayers These spot sprayers are designed to use with ATV's or small utility vehicles. Part# Desc. Price SS25TE 25 Gallon $ SS25T-3N 25 Gallon $ SKBL 60 Gallon Skid $1, SKBL 60 Gallon Skid Sprayer 12 Volt, 3.5 GPM Pump Boomless Nozzles w/24 Coverage Electric Control Valves w/switch Box and Power Lead 15 Hose w/hand Wand SS25TE 25 Gallon ATV Sprayer 12 Volt 2.2 GPM Pump 8 Wire lead with battery clips 30 Hose w/hand Wand SS25T-3N 25 Gallon ATV Sprayer w/nozzle Body 24 spray coverage 12 Volt 3.5 GPM Pump 8 Wire lead with switch and battery clips 27 Hose w/hand Gun S177

180 Roadside Weed & Turf SPECIALTY Green Garde JD9C Spray Gun The JD9C is a heavy duty spray gun adjustable from fine fog to long distance, or stream. The JD9C has a convenient trigger lock for continuous spraying and comes with a choice of 7 different interchangeable spray nozzles and tips. Drip-Free shut-off. Convenient trigger lock for continuous spraying. Maximum 1,000 psi. Adjustable from fine fog to long distance pencil stream. Shipping weight 3 lbs. Most greenhouse growers choose the small nozzle. See complete listing of spray guns: pg. L120-L121 Warner Actuators Fairbank Equipment now offers a full line of Warner Linear standard electric actuators, each specifically designed to meet the needs of light-duty, general-duty, or ruggedduty applications. All are engineered for maintenance-free, long-life service, providing maximum value for our customers. Hannay Single Hose Reel 1500 & 1800 Series (Manual or Power Rewind Reels) 12 volt DC power rewind Direct crank rewind is permanently attached. Standard outlet: 1/2" or 3/4" female NPT threads. Optional rollers: specify roller position when ordering. Available in a wide selection of sizes up to 300 ft. 1/2" diameter hose Manual reels include: cam-lock drag brake, spring actuated pin lock. Standard inlet: 90 ball bearing swivel joint, 1/2" or 1" female NPT threads. Chain and sprocket drive powered by electric, hydraulic, or compressed air motor. Lightweight, compact reels designed for long lengths of hose in manual and power rewind. CALL FOR PARTS OR DETAILS C-2 Hannay Reel roller assembly Roadside Boom Buster Chart S178

181 Roadside Weed Control Flow Meter Part# Descriptions SKU Price O3N30GM Used for Turf $ Foster Stainless Steel Quick Couplings 50MPS ½" Male Thread - Plug 3461 $ FPS ½" Female Thread - Plug 3328 $ FSS ½" Female Thread - Socket 4725 $52.49 Green Garde Spray Hose High-Pressure, Braid-Reinforced, Neon, PVC Hose, 800 PSI Working Pressure, 3000 PSI Burst, Non Kink Memory. PVC High Pressure Spray Hose 3/8-3/4 3 Year Warranty " Hose 300 ft $ " Hose 400 ft $ ½" Hose 400 ft $1, Brass Swivel 11740B Male Garden Hose Thread x Female Garden Hose Thread 1942 $21.58 SPECIALTY John Bean DM Series Sprayers High quality and built to last! FEATURING: 10 or 20 GPM Royal Series Piston Pumps Stainless Steel or Fiberglass Tanks in Multiple Sizes Full Length Mechanical Agitation 16" Fill Openings with Strainer Basket & Sight Guage Ceramic Cylinder Sleeves for Durability Adjustable Pressure Relief Valve Liquid Filled Pressure Guage Large Capacity Suction Strainer Up to 500PSI Powered by Honda Engines John Bean Pump Repair Kits Relief Valve $ Plunger Cup $ Repair Kit $ Valve Kit $ Packing Kit $55.49 S179

182 John Bean Sprayers SPECIALTY R-10 pump Breakdown Item# Part# Description Pump Case Crankshaft (long base pumps) Crankshaft (short base) Connecting Rod HHCS ¼ - 20 x 1 Lock Bearing insert, Pair Oil Slinger RH Includes: Speed Nut Crosshead Wrist Pin Bearing, Ball Oil Seal Retainer Ring Gasket, Mounting Base Mounting Base (long base) Short Base Plug ¼ Std. Galv HHCS 3/8 16 x ¾ Spring Washer 3/8 style P Late Model, Spec Pump/Spray Screw, round head slotted #4 x 3/ Plug ¾ Blk. Std Sleeve Washer, Umbrella Umbrella Ring 11/16 O.D. x 1/16 Buna N O-Ring (use with rulon packing) Packing Holder 1 5/8 Cylinder Packing 1 5/ Packing, Rulon Washer, Back up, Rulon Packing Packing, 1 5/8 Cobox (on ) Packing Washer 1 5/ Packing Washer (on ) HHCS 5/16 18 x 1½ SS 30 A91684 Gasket Cylinder Cylinder 1 5/ Valve Chamber Valve Chamber (on ) Valve Seat Raised Face (on ) O-Ring, 1 3/16 OD x 1/8 Buna N Valve Disc & Spring Assembly Valve Cage Valve Cover Clamp Valve Cover HHCS ½ 13 x 1½ Model# Tank Cap Gallons Tank Material Overall Length Overall Width Pump Capacity Honda Engine Dry Weight DM10E200FERH 200 Fiberglass DM20E200FERH 200 Fiberglass DM20E300FERH 300 Fiberglass DM20E300SERH 300 SS S180

183 John Bean Pump Parts R-20 pump Breakdown Item# Part# Description Cap Screw, ½" - 13 x 1½ Clamp, Valve Retaining Cover, Valve O-Ring 1-13/16" OD Cage, Valve Disc and Spring Assembly, Valve Seat, Valve Pipe Plug, ¼" Galvanized Valve Chamber Valve Chamber Assembly Cap Screw, 3/8" - 16 x 5 11 A Gasket, Cylinder Cylinder (ceramic) Cap Screw, 5/16" - 18 x 1½ Washer, Packing Packing (cup) Holder, Packing O-Ring ¾" OD Umbrella Washer, Umbrella Sleeve (plastic) Case, 2020 Pump 21a Crosshead Wrist Pin Conn. Rod Assembly Cap Screw, Conn. Rod (self Lock) Bearing Insert (pair) Crankshaft Assembly, Driven Crankshaft Assembly, Drive Snap Ring Seal, Oil Bearing (double-fafnir) Bearing (single-fafnir) Oil Slinger Kit Includes: HHCS x ¾ Bolt Strip Gasket, Pump Base Mounting Base, Pump Wave Lock Washer, 3/8" Cap Screw, 3/8" - 16 x ¾ Magnetic Drain Plug, ¼" Pipe Puller, Valve and Seat (pump tool) SPECIALTY S181

184 Hypro Diaphragm Pumps 9910-D252 Pump $ Kit1723 Diaphragm Kit $ GR40 Control Unit $ D403 Pump $ Kit2423 Diaphragm Kit $ Kit2389 O-Ring Kit $15.27 SPECIALTY 1 Denotes Diaphragm Kit 9910-KIT Denotes Valve Kit 9910-KIT Denotes O-Ring Kit 9910-KIT S182

185 Hypro Diaphragm Pumps D D30 Pump $ Kit1724 Diaphragm Kit $ GS40GI Control Unit $ Kit1757 Repair Kit-Control Unit $80.57 SPECIALTY S183

186 DEF Transfer System Dura-Meter DEF 100% moisture sealed circuitry makes meter impervious to water intrusion Meter calibrated for DEF Menu driven backlit display Plumbed both for in-line and 90 degree applications Features 2 Year Service Warranty plan ISO Compliant DP-3000D Features Operating Temp: -10 degrees F to 130 degrees F Flow Rate: 2 to 22GPM ISO Compliant: Yes Meter Accuracy: + /.5% Maximum Pressure: 40 PSI Wetted Materials: Polypropolene; 304 Stainless Steel; Ryton; EPDM Seals SPECIALTY Dura-Pump DEF Easy Caddy Top Suction For totes with RPV type valve ISO Compliant Dura-Pump DEF DEF-2012ME DEFE2512AE High-Flow pump with up to 15GPM free flow rate and 10+GPM with ¾ discharge hose and nozzle Self-priming diaphragm pump with internal bypass Motor thermally protected from overheating 30 minute duty cycle Suction ports both male and female threads no adapters needed Pump is easily field serviceable with all parts readily available Features 2 Year Service Warranty plan 10 minute auto shut-off option (110 Volt only) ISO Compliant S184 DEFE-2012AE-135 Dura-Pump DEF Portable Tote 135 DEF Easy Caddy Pumping System with Top Suction 135 Gallon DEF tote 12 volt DC motor 6" Dual Bung vented lid with MicroMatic RPV valve 3.25" x 20ft DEF discharge hose Choice of manual or automatic nozzle ISO Compliant Dura-Meter DEF Meter optional DP-3000D Dura-Meter DEF $ DEF-2012ME Dura-Pump DEF $ Volt DEFE2512AE DEF Dura-Pump Easy $ Caddy -12 Volt - w/ RPV and Auto Nozzle DEFE-2012AE-135 DEF 135 Tote w/ Easy $1, Caddy -12 Volt - RPV Top Suction and Auto Shut-Off Nozzle DEFE-2012AE DEF Easy Caddy w/o $ Meter-12 Volt, Auto Shut-Off Nozzle DEFE-2015AE DEF Dura-Pump Easy Caddy - 110V - w/ RPV and Auto Nozzle $657.55

187 Bandit Chippers & Stump Grinder Knife Bolt Torque Specs Model# Torque 65XP/ ft. lbs or Nm ft. lbs or 245 Nm ft. lbs or Nm 200 Utility Chipper ft. lbs or Nm 150/200/250/255 ½" Bolt Hole ft. lbs or Nm 150/200/250/255 5 /8" Bolt Hole 180 ft. lbs or 245 Nm 280 ½" Bolt Hole ft. lbs or Nm /8" Bolt Hole 180 ft lbs or 245 Nm 990/1090/1390/ ft. lbs or 245 Nm 1590/ ft. lbs or 245 Nm 2290/ ft. lbs or 245 Nm 3090/ ft. lbs or 245 Nm SPECIALTY Bolt Reference Chart Model# Knife (#of Knives) Bolt Nut/Washer (2 or 3) (pre s/n 4016) (2 or 3) (s/n 4017-current) (2 or 3) (2) pre 4/ (4) post 4/ (4) pre 2/ (4) post 2/ (4) (pre s/n 175) (4) , 150, 200 (s/n ) (4) , 150, 200, 250 (s/n ) (4) , 150, 200, 250 (s/n current) (4) knife per pocket disc (s/n ) (4) knife per pocket disc (s/n 1078-current) (4) knife per pocket disc (s/n ) (6) knife per pocket disc (s/n 1085-current) (6) (4) (pre s/n 141) (2)/ (4) (s/n 141-current) (4)/ (2) (4) (4) (4)/ (2) /1090/1390/ (4) H/1590/1890 (post s/n 1101) (4) (4) None (4) None /2090 (post s/n 2045) (4) (fine thread) (4) (4) (6) (4) (6) (8) S185

188 EQUIPMENT ITEM PAGE ITEM PAGE Agri-Cover... E235-E238 Sales Team.... E272 Agricultural Exempt Certificate.... E269 Seed Express... E241 AgSynergy... E248 Seed Storage... E242-E243 Ammonia Control (Raven)... E258, E259 Sky Trak... E268 Ammonia Trailers... E206-E207 Sensor 1... E265 Automation Systems.... E250-E252 Soil Probes... E249 Bins.... E242, E243 Spreaders Calc-an-Acre... E265 Chandler.... E222 Camera System... E266 Doyle... E217-E218 Dual Spinner.... E228 Capstan... E247 New Leader... E219-E221 Chuckwagon... E215 Parts... E223-E227 Single Spinner... E229 Compressors... E254 Willmar... E216 Conveyors... E239-E240 Tanks Credit Application.... E270 Accessories...E200, E202, E206 Duo-Lift.... E208-E212 Applicator.... E190, E191 Cone Bottom.... E196, E198 EZ-Pilot / EZ-Steer... E264 Elliptical... E207 Formulas/Conversions... E267, E268 Horizontal...E188, E204, E205 Leg... E192 Forms... E269-E271 Mini-Bulk.... E199 GPS Systems PCO & Lids.... E202 Side-Mount Saddle.... E208 TeeJet.... E260 Specialty.... E201, E203 Trimble... E261-E264 Stainless Steel... E189 Raven... E255-E257 Vertical... E188, E193,- E195 Ingersoll Rand... E254 Tenders Murray Equipment (Automation)... E250-E252 Chandler.... E233 KSI Conveyors, Inc.... E240 Doyle... E234 Willmar... E230-E232 MultiBin.... E221 Thompson Strainers... E254 Nurse Units.... E215 Trailer (for Sprayers)... E246 Packhorse, The.... E214 Truck Bed Covers.... E237 Pipe Fittings... E253 Vision Works.... E266 Prior Hubs.... E213 Wacker Neuson... E244, E245 QuickDraw... E185 Wheel Loader... E244 Refrigerated Dryers... E254 R&R Dry Handling Equipment... E239 EQUIPMENT E186

189 Quick Draw - MAX & LITE The SureFire QuickDraw MAX is a fully automated spray tender system. Manually calculating product amounts are a thing of the past. Enter acres or total gallons, sprayer application rate and chemical rate per acre QuickDraw then calculates the amount of each chemical in the batch, including manually added chemicals. Create recipes through the integrated touch screen display, or enter them at your convenience on an ipad and transfer them to the controller later through the built-in wifi connection. Recipes are saved in the controller, making batches easily repeatable Automatically meter 4 or 6 products (depending on model) Manually add up to 5 products for every batch Fast batch mixing keeps sprayer in the field longer during optimal spraying conditions Creates a log of every batch loaded. Log file is downloadable via ipad for required record keeping Eliminates math and calculation errors when mixing. Enter acres or total gallons, sprayer application rate and chemical rate per acre. QuickDraw calculates the amount of each chemical in the batch, including manually added chemicals. Micro-Motion mass flow meter for chemical measurement is 0.50% accurate. It measures liquid mass, density and volume. Measurement is not affected by product viscosity, conductivity or other characteristics; therefore no calibration numbers are necessary. 3 transfer pump (sold separately) for 200+ GPM water transfer after chemical mixing complete ipad app communicates over Wi-Fi. Create and modify recipes and access historical records EQUIPMENT NEW! QuickDraw LITE provides mass flow measurement of chemicals with refined features and operation. QuickDraw Lite is a manual or semi-automated spray tender system. In manual operation open a product valve, watch the display until desire chemical amount has been measured into the sprayer and close product valve. In semi-automated operation enter the desired chemical amount, press start. When the set point is reached, the product valve automatically closes. E187

190 Standard Storage Tanks Storage Tanks Include: (2) 3" couplings Sight tube Top inspection plate Wind guard 24" side manway Gallon strip Lift & tie down brackets Vent All brackets are stainless steel. Tanks are custom to customers specifications. EQUIPMENT Call For Pricing on the Complete Line of Fiberglass Tanks Fiberglass Truck Tanks Round Gallons Round Dimensions 250 3' x 4' 10" 300 3' x 6' 400 4' x 5' 500 4' x 5' 600 4' x 6' 800 4' x 8' 1,000 5' x 6' 10" 1,200 5' x 8' 3" 1,250 5' x 8' 7" 1,400 5' x 9' 6" 1,500 5' x 10' 3" 1,600 5' x 10' 11" 1,800 6' x 8' 6" 2,000 6' x 9' 6" 2,500 6' x 11' 10" Oval Gallons Round Dimensions 1,000 52" x 72" x 6' 7" 1,200 52" x 72" x 7 '11" 1,250 52" x 72" x 8' 3" 1,500 52" x 72" x 9' 10" 1,500 62" x 90" x 6' 10" 1,600 52" x 72" x10' 5" 1,800 52" x 72" x 11' 10" 1,800 62" x 90" x 8' 2" 2,000 52" x 72" x 13' 1" 2,000 62" x 90" x 9' 2,500 52" x 72" x 16' 7" 2,500 62" x 90" x 11' 4" 3,000 62" x 90" x 13' 6" 3,200 62" x 90" x 14' 6" 3,360 62" x 90" x 15' 3,500 62" x 90" x 15' 10" E188

191 Stainless Steel Tanks Precision 304 Stainless Steel Nurse Tanks are constructed to withstand the demands of an agricultural nurse tank that operates in the field. They are custom built to your specifications. Size Dimensions Baffles Shell 1,600 60" x 120" x 137" 1 12 Gal 1,800 60" x 144" x 161" 1 12 Gal 2,000 60" x 156" x 173" 2 12 Gal 2,450 66" x 156" x 178" 2 12 Gal 3,300 72" x 180" x 202" 2 12 Gal 3,500 72" x 192" x 214" 2 12 Gal EQUIPMENT Double conical tanks are equipped with the following fittings and assembly: 1½" sight gauge fittings on each end Double reinforced baffles 3" outlets, vents, lifting lugs, ladder 16 manway and stainless steel skids. 2" SS Sparge Tube Size Dimensions Compartments Outlets 3,200 60" x 84" x 180" 2 3" E189

192 Applicator Tanks Lawn & Garden Part# FOB Gallons Outlet Diameter Height Length 102 L,P 8 R 12" 14¾" 16" 104 L,P 12 R 12" 18¾" 16" 110 L, P, M, C 15 G 14" 13¼" 32" 114 L, P, M, C 25 G 17¾" 16¼" 36" G = 6 Cap, no outlet. R = 6 fill, one 1" diameter ¾" long ½" ID threaded, molded spout with 4¼" x 20" molded-in anchor inserts. FEATURES: Molded-in gallonage markers (indicators) 6" threaded opening Molded-in inserts for 12 volt pump mounting UV inhibitors are molded in for longer tank life EQUIPMENT PCO Part# FOB Gallons Outlet Diameter Height Length 109 L, P, M, C 30PCO U-6" Lid 19" 22½" 24½" 117 L, P, M, C 50PCO U-6" Lid 19" 22 ½" 38" 120 L, P, M, C 100PCO U-10" Lid 30" 31" 38" 157 L, P, M, C 150PCO U-10" Lid 36" 29" 48" 166 L, P, M, C 200PCO U-10" Lid 36" 39½" 48½" 172 L, P, M, C 300PCO U-18" Lid 38" 36¾" 69" U = No holes or fittings. Fittings can be ordered separately. FEATURES: Molded-in gallonage markers (indicators) Flat spots on each end for easy agitation Design requires no additional support or banding UV inhibitors are molded in for longer tank life Lawn & Garden Part# FOB Gallons Outlet Diameter Height Length 103 L, P, C 25 A 23" 26¾" 19" 105 L, P, M, C 55 A 23" 38¼" 38" 111 L, P, M, C 110 C 30" 49¾" 50" 113 L, P 150 C 30" 34¾" 60" 115 L, C 150 C 32" 36½" 56" 123 L, M 200 C 32" 36½" 71" 125 L, P, C 200 C 38" 40½" 52" 133 L, P, M, C 300 C 38" 42" 72" 135 L 400 C 42" 46¼" 72" M, C 500 C 42" 47" 92" 139 L, C 500 C 48" 52¼" 75" 143 L 1,000 U-10" Lid 65" 68" 87" 1001 L 1,300 C 86" 66" 89" A = 6" fill, one ¾" outlet with anti-vortex. H = 18" manway, one 3" bolted outlet w/siphon. C = 10" fill, two 1¼" outlets, one with anti-vortex. U = No holes or fittings. Fittings can be ordered separately. FEATURES: 10" threaded cap for easy filling Molded-in gallonage markers (indicators) Center sumps and end flat spots UV inhibitors are molded in for longer tank life E190

193 Applicator Tanks Elliptical Part# FOB Gallons Outlet Diameter Height Length 147 L 300 U-10" Lid 48" 30" 72" 124 L 400 U-10" Lid 48" 39" 72" 148 L 525 U-10" Lid 58" 36" 81" 150 L 850 U-10" Lid 68" 44" 93" 149 L 1025 U-10" Lid 78" 47" 93½" L 1650 H-10" Lid 71" 55" 142" L 2000 H-18" Lid 84" 55" 142" U = No holes or fittings. Fittings can be ordered separately. H = 18" manway, one 3" bolted outlet with siphon. FEATURES: Molded-in gallonage markers (indicators) Low profile for ease of transport Bottom sumps and recessed end flat spots UV inhibitors are molded in for longer life Champion Part# FOB Gallons Outlet Diameter Height Length 134 L 300 C 46" 33" 64½" 172 L 500 C 57" 38½" 89" C = 10" fill, two 1¼" outlets, one with anti-vortex. FEATURES: Molded-in gallonage markers (indicators) Unique design excellent for custom applications Bottom sumps for ease of drawing UV inhibitors are molded in for longer life EQUIPMENT Sidemount Part# FOB Gallons Outlet Diameter Height Length 127 L 200 TV C 32" 42½" 48" 126 L 200 STV C 24" 45½" 59" 118 L 260 STV C 24" 59" 59¾" 131 L 260 TB C 31" 48" 54" C = 10" fill, two 1¼" outlets, one with anti-vortex. FEATURES: Molded-in gallonage markers (indicators) Designed for easy viewing from tractor cab Bottom sumps for better drainage UV inhibitors are molded in for longer life Spherical Part# FOB Gallons Outlet Diameter Height 626 L 1,050 10" Lid 78" 83½" L = 10" (Lnk) or 16" (CA) lid FEATURES: Designed for special applications, reduces sloshing 10" fill opening and molded-in ties Bottom sumps for better drainage UV inhibitors are molded in for longer life E191

194 Leg Tanks Leg Part# FOB Gallons Outlet Diameter Height Length Bands/Hoops 108 L, P, M, C 30 G 23" 25¾" 19½" , band 106 L, P, M, C 600 A 23" 25¾" 38" , band 1132 L 125 S 30" 34½" 50" , band 122 L 200 S 41" 31¾" 54" , band 128 L, P, M, C 230 S 38" 42½" 52" , band 132 L, P, M 300 S 38" 42½" 72" , band 140 L, P, M 525 E 48" 52½" 75" , hoop optional 136 L, P, M, C 730 E 57½" 57½" 80" FEATURES: Molded-in gallonage markers (indicators) Free standing HLT requires no cradles for support (optional) Ribbed for strength with built-in supports UV inhibitors are molded in for longer tank life EQUIPMENT Total Drain/Slope Bottom Part# FOB Gallons Outlet Diameter Height Length Bands/Hoops 851 M 750 Slope D 46" 48" 113" L 1,000 Slope D 46" 48" 154" L 1,250 Slope D 46" 47" 154" L, P, M, C 3,100 Slope T 92" 74" 142" Included *3100 Slope includes Snyder SUMO (Snyder Unitized Molded Outlet) FEATURES: Molded-in gallonage markers (indicators) Total drain bolted fitting standard for complete drainage 18" manway for easy access. UV inhibitors are molded in for longer tank life Super Nurse Part# FOB Gallons Outlet Diameter Height Length Bands/Hoops 130 L, M 750 D 46" 48½" 116½" L 1,000 D 46" 48" 154" L, P, M, C 1,025 D 48" 50" 139" M 1,200 HLT H 68" 40" 140" M 1,600 HLT H 68" 50" 140" L, P, M, C 1,685 H 60" 62" 159" L 2,000 H 60" 70½" 160" M 2,150 HS 1 82" 58" 156" Included M 2,500 HS 1 82" 72" 156" Included 847 L, P, M, C 2,600 H 82" 70" 155" L 3,000 H 92" 76" 142" M 3,250 HS 1 92" 75" 177" Included M 3,250 Dual 1 92" 72" 178" Included 7520 L 3,400 H 82" 86" 155" A = 6" fill, one ¾" outlet with anti-vortex. G = 6" cap, no outlet. D = 18" manway, one 2 bolted outlet S = 10" fill, one 1¼" outlet. with siphon. 1 = 3" Sumo, 24" transport lid. E = 10" fill, one 2" HD outlet with siphon. FEATURES: Molded-in gallonage markers (indicators) Molded-in baffles to reduce sloshing Bolted fitting standard to reduce fitting loosening during use UV inhibitors are molded in for longer tank life E192

195 Vertical Tanks Vertical Part# FOB Gallons Outlet Diameter Height 155 L 65 A 23¼" 45¾" L 150 U 33¼" 60" L 200 U 39¾" 55½" 154 L 200 V 40" 48½" 802 P, M 210 B 33" 66½" L 330 U 47" 65½" 174 L 400 N1 45" 63½" 182 L 550 N1 64" 46½" 167 M, C 550 L 64" 46" 180 L, P, M 550 N1 48" 74" 181 L, P, M 850 N1 48" 117" 183 L, P, M 1,100 N2 64" 90¼" 171 L, P, M, C 1,100 L 86" 56½" 177 L, P, M, C 1,500 L 86" 73½" 184 L, P, M 1,550 N2 64" 124½" 178 L, P, M, C 1,650 L 86" 80" 5050 L, P 2,000 N2 90" 88" 813 M 2,000 N2 90" 88" EQUIPMENT FEATURES: Heavy duty bolted fittings standard on 550 gallon and above to reduce threat of fitting loosening during use Fitting compatible siphon tubes to allow bottom fill of tank Molded-in tie downs for securing and lift lugs for easy movement UV inhibitors are molded in for longer tank life Utility Part# FOB Gallons Outlet Diameter Height 162 L, P 300 E 64" 32½" 165 L, P 465 E 64" 48" E = 10" fill, one 2" HD outlet with siphon tube. FEATURES: Molded-in gallonage markers (indicators) 300 & 465 gal. tanks have offset life for easy-access side filling Natural color is FDA compliant for water UV inhibitors are molded in for longer tank life E193

196 Snyder Vertical Tanks EQUIPMENT Vertical Part# FOB Gallons Outlet Diameter Height 5090 L, P 2,500 N2 90" 106½" M 2,500 N2 90" 107" 7410 L, P 3,000 N2 102" 97" 816 L, P, C 3,000 N2 90" 126" 819 M 4,000 N2 102" 130½" 5210 L 4,400 N2 90" 182¼" 7420 L, C 4,4500 N2 102" 142½" 821 M 5,200 N2 102" 160½" H7002 L 5,400 N2 142½" 91" 5250 L 5,600 N2 142" 101¼" 7430 L, P, C 6,000 N2 102" 188" 7000 L, P 6,000 N2 120" 132" 822 M 6,250 N2 120" 140" 7140 L, P 6,900 N2 120" 153¼" 5300 L 7,650 N2 142" 122 ¾" 7370 L 7,900 N2 120" 176" 7400 L 8,900 N2 120" 194" 7450 L 9,800 N2 120" 215" 5330 L, P 10,500 U/W 142" 169½" 5350 L 12,500 U/W 142" 198¾" 5370 L 15,000 U/W 142" 235" A = 6" fill, one ¾" outlet with anti-vortex B = 8" fill, one 1¼" outlet E = 10" fill, one 2" HD outlet with siphon I = 10" fill, one 2" bolted with siphon tube N2 = 18" manway, one 2" bolted outlet with siphon U = No holes or fittings. Fittings can be ordered separately N1 = 18" manway, one 2" HD outlet with siphon V = 6" screw-on cap, one 1¼" outlet fitting W = 18" manway FEATURES: Heavy duty bolted fittings standard on 550 gallon and above to reduce threat of fitting loosening during use Fitting compatible siphon tubes to allow bottom fill of tank Molded-in tie downs for securing and lift lugs for easy movemen UV inhibitors are molded in for longer tank life E194

197 Ace Vertical Tanks Part# Gallons Weight Diameter Height Lid Size VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT VT , VT , VT , VT , VT , VT , VT , VT , VT , VT , VT , VT , VT , VT ,150 1, VT ,250 1, VT ,000 1, VT ,500 2, EQUIPMENT E195

198 Snyder Cone Bottom Tanks Cone Stand 30 Part# Description " Cone Stand (4 Leg) " 45 ton gross eight capacity cone stand (8 let) " Stands for P/N 831, 833, 835 & 836 (3" clearance, 8 leg) " Stands for P/N 831, 833, 835 & 836 (12" clearance, 8 leg) " Cone stand 100 ton gross weight cacity (12 leg) EQUIPMENT Cone Bottom Tanks Cone Stand 45 Part# Description " Cone stand (4 leg) " Cone Stand 45 ton gross weight capacity (8 leg) C8070P 70 Gallon basket & stand for P/N H1560 C5475P 475 Gallon basket & stand for P/N H1560 C5500P 500 Gallon basket & stand for H1880 C501KP 1000 Gallon basket & stand for H1890 Part# FOB Gallons Slope Outlet Diameter Height Stand Required H15604 C225 w/ poly stand 30 O 47¾" 51¼" w/stand Included H15605 C325 w/poly stand 30 O 47¾" 66" w/stand Included 188 L J 86" 57¾" L J 64" 80¼" L 1, J 86" 79¾" L 1, J 64" 119¾" L 1, J 86" 92¾" L 1, J 64" 158¼" M 1, O 95" 98¾" / L 1, J 86" 108¾" L 2, O 90" 130" 79100/ L 2, O 90" 150" 79100/ M 2, O 95" 128¾" / L 2, O 90" 140¾" 79200/ L 3, O 90" 171" 79100/ M 3, O 95" 145¾" / L 4, O 90" 221¾" 79200/ L 5, O 90" 262" 79100/ L 6, O 90" 257½" 79100/ L 6, O 142" 158½" L 8, O 142" 179" L 11, O 142" 237" E196

199 Ace Cone Bottom Tanks` Cone Bottom Inductor Tanks Gallons Diameter Height Fitting Lid Size 15 19" 21" 2" 12" 30 24" 26" 2" 16" 40 30" 24" 2" 12" 55 24" 42" 2" 12" " 2" MPT 16" 85 30" 94" 2" 12" EQUIPMENT Gallons Slope Diameter Height " 54" " 67" " 81" " 81" 1, " 98" 1, " 62" 1, " 132" 1, " 85" 1, " 85" 2, " 111" 2, " 123" 3, " 128" E197

200 Cone Bottom Tanks EQUIPMENT Bulk Storage Tanks (including stand) Part# Capacity Slope Weight Dimensions Height Lid Fitting CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 2" CB X " 3" CB X " 3" *Indicates heavy duty fitting **Specific Gravity is 2.0 Cone bottom tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Tanks require stands to support the conical bottoms. They are manufactured from medium-or high-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity. The walls are translucent for level viewing and equipped with gallon indicators. Cone Bottom Stands (from tank to ground) Part# Capacity Slope Weight Clearance CB023-15ST 55, " CB036-15ST 145, 200, 250, " CB036-45ST " CB042-45ST 200, 300, " CBFD042-45ST 240 GAL Full Drain " CB052-45ST 345, " CB064-45ST 1000, " CB086-15ST 800, " CB086-45ST " CB090-15ST 850, 1000, 1150, 1200, " 1300, 2450, 2500, 3000 CB090-30ST 1550, 1600, 2550, " CB096-30ST " CB102-15ST 4600, " CB122-15ST 6900, " E198

201 Mini-Bulk Tanks Square Stackable Part# FOB Gallons Diameter Height Length 666 L ¾" 34¼" 45¾" 663 L ¾" 36¼" 45¾" 662 L ¾" 53¾" 45¾" 661 L ¾" 53¾" 45¾" FEATURES: Stable 4-forklift and pallet jackable DOT approved Bottom 2" Outlet for easy draining Multiple GEM cap options EQUIPMENT Excalibur Part# FOB Gallons Diameter Height Length 656 L " 31" 36" 651 L " 45" 52" E199

202 Tank Saddles, Skids & Hoop Sets EQUIPMENT Skid & Hoop Assemblies Part# Description Width Length Height " 41" 110 lbs " 60" 136 lbs " 48" 164 lbs " 72" 292 lbs " 86" 330 lbs " 95" 370 lbs " 131" 405 lbs " 128" 450 lbs (Elliptical) 51" 68" 180 lbs (Elliptical) 60" 72" 282 lbs (Elliptical) 68" 82" 363 lbs (Elliptical) 78" 80" 372 lbs x 48" hoop assy (2) x 54" hoop assy (each) x 46" hoop assy (2) x 46" hoop assy (4) x 48" hoop assy (4) super nurse assy (H) hoop assy (4) (H) hoop assy (4) x 60" hoop assy (4) elliptical hoop assy super nurse assy elliptical hoop assy x 60" hoop assy (4) elliptical hoop assy elliptical hoop assy (4) BND-02H 2800 elliptical hoop assy elliptical hoop assy (4) super nurse assy (4) Curved support on rails, cradle and bands for one tank. Saddles Part# Description Width Length Height " (one curved support) 16" 18" 17lbs " 12" 18" 24lbs ", " 12" 21" 38lbs ", ", 12" 28½" 57lbs ", " TV, 260TV 12" 32" 98lbs " 12" 30½" 69lbs " 12" 37½" 78lbs ", " 24" 40" 11lbs ", " 24" 55" 20lbs " 36" 40" 21lbs ", " 36" 55" 30lbs " 45" 55" 40lbs Two curved support sections with bands and padding for one tank. Saddle & Skid Padding & Bands Part# Description Padding 12" x 36½" " " Band Bach (Fits 25-23" & 55-23") " Band Each (Fits 200TV & 260TV) ½" Band Each (Fits ", ", ", ") " Band Each (Fits 200TV, 260TV, 200 Champ, 525 Elliptical) " Band Each (Fits ", ") " Band Each (Fits ", ") " Band Each (Fits 1,000-65") " Leg Tank Band Each (Fits 30 & 60 gallon) " Leg Tank Band Each (Fits 125 & 200 gallon) " Leg Tank Band Each (Fits 230 & 300 gallon) " Leg Tank Band Each (Fits 525 gallon) " Leg Tank Band Each (Fits 730 gallon) " Band (Fits 300 elliptical) " Band (Fits 850 elliptical) " Band (Fits 1,000 elliptical) E200

203 Specialty Tanks SP0005-RT SP0004-SQ8 SP0007-RT SP0020-OM CALL FOR CURRENT PRICING Ace Rinse Tanks Part# Gallons Description Dimensions Lid SP0005-RT 5 Rectangle 10x22x8 5" SP0006-2P 6 Pump Mt 12x15x8 2" SP0006-5N 6 Rectangle 12x15x8 5" SP0007-RT 7 Rectangle 9x14x15 5" SP0016-MM 16 Rectangle 14x21x14 5" SP0020-0M 20 Rectangle 11x15x31 5" SP0026-RT 26 Rectangle 18x25x19 8" SP0045-AS 45 Rectangle 17x37x18 5" SP0055-MM 55 Rectangle 18x18x45 5" SP0080-RT 80 Rectangle 18x27x45 5" SP0100-RT 100 Rectangle 27x46x26 8" SP0035-RT 35 Fully Drainable 19x28x30 5" SP0056-RT 56 Fully Drainable 20x38x26 5" SP0008-VM 8 Loaf 12x16x17 5" SP0012-RT 12 Rectangle 14x18x12 5" SP0012-VM 12 Loaf 12x16x22 5" SP0020-LC 20 Rectangle 14x28x12 5" EQUIPMENT SP03.5-CL Part# Gallons Description Dimensions SP0003-RT 3 Rectangle 17x12x14 SP03.5-CL 3.5 Cylinder 11x16 SP0004-SQ5 4 Square 11x11x15 SP0004-SQ8 4 Square 11x11x14 SP0005-SQ5 5 Square 11x11x20 SP0005-SQ8 5 Square 11x11x19 E201

204 PCO Tanks & Lids Ace Spot Sprayer Tanks are available with a clean out sump. Tanks are manufactured from low density polyethylene with UV inhibitors and designed for containment of liquids up to 1.7 SG. Tank walls are translucent for viewing and equipped with gallon indicators. Raven Tank Lids 10" Threaded Part# Description Price Fillwell $ Cover $ " Threaded with 4" Vent Part# Description Price Fillwell $ " Cover $ " Vent $8.78 EQUIPMENT Ace Spot Sprayer Tanks Part# Gallons Height Length Price SB00060SYSS 60 26" 36" $88.64 SB00040SYSS 40 19" 36" $68.45 SS " 34" $71.22 Snyder Tank Lids 5" Threaded Cap 10" Threaded Cap 18" Threaded w/4"vent Part# Price Part# Price Part# Price SN $ SN $ $ (vent only) $18.30 E202

205 Specialty Tanks Stackable Tote Tanks 70 gallon and 120 gallon stackable totes Free standing totes for indoor or outdoor use Can be used in stationary or transportable applications Each tote features three 2 threaded ports Furnished with 7 vented lid assembly and lanyard Four lift ears are provided for lifting each tote Part# Description Weight Dimensions ST Gal 42lbs 32" x 32" x 25" ST Gal 77lbs 32" x 32" x 38" ST70/120SK 70/120 Skid 50lbs 30" x 30" x 8" Ace PCO Tanks Part# Description Weight Dimensions PC Gal 25lbs 16" x 35" x 21" PC Gal 25lbs 19" x 38" x 23" PC Gal 50lbs 30" x 38" x 29" PC Gal 61lbs 37" x 48" x 29" PC Gal 82lbs 37" x 48" x 38" PC Gal 60lbs 37" x 48" x 38" EQUIPMENT Lids for Ace Tanks Part# Description " Spin-on lid with spring vent " Spin-on lid with spring vent " Threaded Vented Lid & Ring " Threaded Vented Lid & Ring " Threaded Vented Lid & Ring " Threaded Vented Lid & Ring Breather Only (for 8" & 12" lids) Breather, 4" Center (for 16" lid) E203

206 Free Standing Horizontal EQUIPMENT Bulk Tanks Without Sump Part# Capacity Weight Dimensions Lid Fitting FS gal x 34 5" 1" FS gal x 39 5" 1" FS gal x 39 5" 1" FS gal x 40 8" 1" FS gal x 54 8" 1" FS gal x 52 12" 2" FS gal x 72 16" 2" FS gal x 56 16" 2" FS gal x 80 x 39 16" 2" FS gal x 78 16" 2" FS gal* x " 2" FS0925-DW 925 gal* x 81 16" 2" FS ,005 gal* x " 2" FS ,010 gal** x " 2" FS ,035 gal* x 90 x 52 16" 2" FS W 1,065 gal* x " 2" FS1300-DW 1,300 gal* x " 2" FS ,610 gal x 139 x 56 16" 2" FS W 1,750 gal* x " 2" FS1800-2W 1,800 gal* x " 2" FS ,350 gal* x 146 x 63 16" 2" FS2600-2W 2,600 gal* x " 2" FS ,750 gal* x 146 x 70 16" 2" FS3200-2S 3,200 gal** x 172 x 74 16" 2" FS ,250 gal* x 146 x 79 16" 3" FS ,750 gal x 146 x 91 16" 3" FS ,250 gal x 146 x " 3" *Hoops Required **Hoops and Skid Required Free standing tanks are selected when transportable (non DOT regulated) containment is required for indoor or outdoor applications. Tanks are equipped with molded-in legs to support the tank and band locators for tie down. These tanks are manufactured from mediumor high-density polyethylene with U.V. inhibitors and designed for contaiment of liquids of up to 1.7 specific gravity. The walls are translucent for level viewing and equipped with gallon indicators. E204 With Sump Part# Capacity Weight Dimensions Lid Fitting FM S x 34 5" FM S x 39 5" FM0925-DS x 39 16" 2" FM S x 40 16" 2" FM1300-DS x 54 16" 2" FM S x 52 16" 2" FM S x 72 16" 2" FM1800-2S x 56 16" 2" FM S x 80 x 39 16" 2" FM2600-2S x 78 16" 2" FM S x " 2" FM S x 81 16" 2" *Hoops Required **Hoops and Skid Required

207 Round Horizontal These tanks are selected when transportable (non DOT regulated) containment is required for indoor or outdoor applications. Tanks require skids and bands to support the round bottom. All tanks are equipped with drain out sumps. They are manufactured from medium-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity. The walls are translucent for level vieweing and equipped with gallon indicators. Bulk Storage Tanks Part# Capacity Weight Dimensions Lid Fitting HZ gal x 22 5" ¾" HZ gal x 38 5" ¾" HZ gal x 47 5" ¾" HZ gal x 56 5" 1¼" HZ gal x 64 5" 1¼" HZ gal x 44 8" 1¼" HZ gal x x 57 8" ¾" x 1¼" HZ gal x x 52 8" ¾" x 1¼" HZ gal x x 68 8" ¾" x 1¼" HZ gal x x 51 8" ¾" x 1¼" HZ gal x 76 8" ¾" x 1¼" HZ gal x 76 8" ¾" x 1¼" HZ gal x 79 8" ¾" x 1¼" EQUIPMENT Cradles for Horizontal Tanks Part# Capacity Weight Bands HZ0025-C 25 gal x 22 HZ0055-C 55 gal x 38 HZ0075-C 75 gal x 47 HZ0095-C 95 gal x 56 HZ0100-C 100 gal x 64 HZ0110-C 110 gal x 44 HZ0153-C 150 gal x x 57 HZ0150-C 150 gal x x 52 HZ0232-C 200 gal x x 68 HZ0238-C 200 gal x x 51 HZ0300-C 300 gal x 76 HZ0500-C 500 gal x 76 HZ0400-C 400 gal x 79 E205

208 Free Standing Horizontal Tanks EQUIPMENT Part# Capacity Weight Dimensions FS048-HP 735 gal Hoops Set of OD FS062-HP gal Hoops Set of OD FS062-HP gal Hoops Set of OD FS062-HP gal Hoops Set of OD FS062-HP-1800C 1800 gal Hoops Set of OD FS062-HP-2600C 2600 gal Hoops Set of OD FS0510-HP 510 gal Hoops Set of OD FS1005-HP 1005 gal Hoops Set of OD FS1010-HP 1010 gal Hoops Set of OD FS1035-HP 1035 gal Hoops Set of OD FS1065-HP 1065 gal Hoops Set of OD FS1065-BAF 1065 gal Baffles 38 0 FS1610-HP 1610 gal Hoops Set of OD FS2350-HP 2350 gal Hoops Set of OD FS2750-HP 2750 gal Hoops Set of OD FS3200-HP 3200 gal Hoops Set of OD FS3250-HP 3250 gal Hoops Set of OD FS3250-LAD 3250 Ladder 46 16X78 FS3750-HP 3750 gal Hoops Set of OD FS4250-HP 4250 gal Hoops Set of OD FS0925-SK 925 gal Skid X64 FS1010-SK 1010 gal Skid X115 FM1065-SKS 1065 gal Skid w/ Sump X78 FS1065-SKW 1065 gal Skid X100 FS1300-SK 1300 gal Skid X104 FM1610-SKC 1610 gal** X107 FM1610-SKE 1610 gal* X112 FM1750-SK 1750 gal Skid X138 FM1800-SKS 1800 gal Skid w/ Sump X125 FS1800-SKW 1800 gal Skid X125 FM2350/3250-SKC 2350/2750/3250 gal** X141 FM2350/3250-SKE 2350/2750/3250 gal* X141 FM2350/3250-SK 2350/2750/3250 gal Skid X141 FS2600-SK 2600 gal Skid X201 FS3200-SK 3200 gal Skid X168 **Skid with Center Sump *Skid with End Sump E206

209 Elliptical Tanks Elliptical Tanks can be selected for stationary or transportable (not DOT regulated) applications both indoors and outdoors. These tanks lower the center of gravity to enhance stability and visibility. The tanks feature a standard 2½" collection sump on the bottom for full dain out. The tanks are manufactured from medium-density polyethylene with U.V. stabilizers and are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators. Part# Capacity Weight Dimensions Lid Fitting HE gal 82 41x66x26 8" ¾" & 1¼" HE gal x70x30 8" ¾" & 1¼" HE gal x70x36 8" ¾" & 1¼" HE gal x82x36 8" ¾" & 1¼" HED gal (8.5") Sump x82x36 8" ¾" & 1¼" HE gal x89x42 16" 1¼" & 2" KED gal (8.5") Sump x89x42 16" 1¼" & 2" HE gal x89x46 16" 1¼" & 2" HED gal (8.5") Sump x89x46 16" 1¼" & 2" HE gal* x90x49 16" 1¼" & 2" HED gal (8.5") Sump x90x49 16" 1¼" & 2" HE gal x92x60 16" 1¼" & 2" HED gal (8.5") Sump** x92x60 16" 1¼" & 2" HE gal"" x138x49 16" 2" HED gal (6") Sump** x138x49 16" 2" *Baffle option available **Baffle system standard EQUIPMENT Cradles for Elliptical Tanks Part# Capacity Weight Bands HE0200-C 200 gal 140 3" x 61" HE0300-C 300 gal 155 3" x 74" HE0400-C 400 gal 190 4" x 88" HE0500-C 500 gal 202 4" x 88" HE0750-C 750 gal 405 4" x 91" HE0850-C 850 gal 408 4" x 99" HE1000-C 1000 gal 515 4" x 105" HE1250-C 1250 gal 520 4" x 126" HE1600-C 1600 gal " x 124" E207

210 Fairbank Saddle Tanks & Ammonia Trailers Fairbank Side-Mount Saddle Tanks Tanks and mounts to fit most makes and models of tractors. Superior forward visibility Easy access to the engine for routine service. Excellent ground clearance All mounting hardware included with each kit Simple on and off Easy entry to cab using original equipment step 400 or 500 gallon capacity Twin tube design stabilizes tank and simplifies plumbing Heavy duty construction Call Fairbank with make and model of tractor EQUIPMENT NP-1000 Conversion Convert your older anhydrous ammonia tanks with the NP This unit accommodates the 1,000 gallon Prior style tank with a triangular mount. Duo Lift N-1000 Hi-Rise Ammonia Trailer All Duolift hi-rise trailers feature 5th wheel steering and are equipped with a 2½" king pin. Tire tracks can be adjusted from 60" to 90" in minutes with the original easy to use clamp design. Simply loosen one bolt per tire. The front axle is designed to turn completely under the wagon. N-1000 High Clearance Specifications Tank 1,000 Gallon Capacity 14,000 # GVW Axle Clearance 32" Clearance Axles 4" x 8" Hubs 6 Bolt 3,800# Wheels 15" x 10" x 6" Track Adjustment 60" to 90" (120" optional) Optional Tires 11 L x 15" or 12.5 L x 15" E208

211 Ammonia Trailers M-2200 Duo-Lift s M2200 wagon has become very popular because it is an economical way to add larger units to your fleet. Allows you to utilize old 1,000 gallon tanks from worn out trailers. M-2200 N2900 M-3200 The M-3200 is designed like the M-2200 except it is designed with heavier hubs and spindles and is slightly wider. Will accommodate 1,450 gallon tanks. N-2900 High Rise With the N-2900 wagon, the front axle is designed with a pivot pin that allows the tires to adapt to the terrain in any position, straight or turned. Because the axle can turn completely under the wagon frame, it is ideal for tight maneuvering in the field This wagon will accommodate twin 1,000 or 1,450 gallon tanks. LB2110 The LB2110 is a shorter wheelbase version of the popular LB2200 and is made for (1) short style 2000 gallon NH3 tank instead of twin 1000 gallon NH3 tanks. Plumbing is cleaner, easier and cheaper with only 1 withdrawal hose coming forward to the toolbar. Lowboy design keeps the center of gravity low and the complete turn under steering system provides maximum maneuverability EQUIPMENT LB2110 LB1 Optional Features Hydraulic Surge or Electric over Hydraulic Brakes Cushion, Extendible or Spring Lift Assist Tongue 16.5L x16.1 or 21.5L x 16.1 Flotation Implement Tires 120" or custom track width LB1 Low Boy Wagon An adaptable fertilizer wagon that pulls ahead in the field, with category-leading engineering to accept nearly any NH3 tank backed by Duo Lift s legendary build quality. We have truly defined the meaning of "Universality". This unit has been designed to accommodate twin 1,000 gallon or 1,450 gallon NH3 tanks. There is also an option to accommodate a single 2,000 gallon or 3,000 gallon "Shorty" NH3 tank. The LB1 comes standard with an adjustable rear axle, from 92" to 120" Track Width. Model# Tank Size Track Width Axle Clearance Tire Size Hub Capacity (Ea) Spindles Wheels M ,000 86" N/A 22" 16.5x16.1 or 5,970 lbs 2.50" 16.1 x 11" 21.5x16.1 M ,000 or 2-1, " N/A 22" 16.5x16.1 or 8,000 lbs 3.25" 16.1 x 14" 21.5x16.1 M ,000 or 2-1, " N/A 30" 16.5x16.1 or 21.5x16.1 8,000 lbs 3.25" 16.1 x 14" E209

212 Anhydrous Ammonia Trailers EQUIPMENT M-1000 M-1450 M-2000 CAPACITY 12,000#GVW 14,000#GVW 20,000#GVW TANK SIZE 1,000 gallon 1,450 gallon 2,000 gallon TRACK WIDTH 60-80" Adjustable or fixed 60-80" Adjustable or fixed 60-80" fixed WHEEL BASE 108" to 120" 108" to 120" 168" GROUND CLEARANCE 16" 16" 20" WHEELS 15" X 8" 6-Bolt 15" x 10" 6-Bolt 16.1 x 11" 8-bolt HUBS 6-Bolt 6-Bolt 8-Bolt SPINDLES 2" 2" 2-1/2" FRONT BOLSTER 5-Leaf 6-Leaf 6-Leaf KING PIN 2" 2" 2" AXLES 4" x 6" 4" x 6" 4" x 6" REACH POLE 3" Tubing 3" Tubing 3" Tubing 5TH WHEEL 3/8" x 15" 3/8" x 15" 3/8" x 15" TONGUE 2" x 4" 2" x 4" 2" x 4" SAFETY CHAIN YES YES YES OPTIONAL FEATURES: BRAKES Electric or hydraulic surge brakes available on all models TONGUE Cushion Cushion Cushion TIRES 11L x L x L x 16.1 GROUND CLEARANCE 20" or 24" 20" or 24" 24" E210

213 Low Boy Trailers Model LB-2200 NH3 Wagon Now you can make good use of those old 1,000 gallon ammonia tanks! Models available for twin 1,000 gallon, twin 1,450 gallon, single ammonia tanks. Valves accessible from the ground Turn under front axle for maneuverability Strong semi king pin turntable Will accommodate Prior ammonia tanks 20,000lbs G.V.W.R. 3" x 4" heavy duty tubing tongue 8-bolt hubs EQUIPMENT Model SLB-2900 Low Boy Liquid Tank Wagon For 2,000 to 2,500 Gallon poly tanks. 32,000 lbs GVWR 2,000 to 2,600 gallon tank 108" rear, 60" front 886, 8 bolt 8,000lb hubs 16.1x 14.8 x 8 wheels 3.00" diameter spindles 8 wide steel beam rear axle 4" x 8" Heavy Wall Tubing with 2.75" Dia Rocking Pin 5th wheel with 2 SAE, Heat Treated, 75 ton semi king pin turntable 12" wide main frame steel beams and 6" schedule 80 tourque tube Cross Members for 2000 or 2600 gallon horizontal poly tank 3" x 4" heavy duty tubing in tongue Pump mount plates with front mesh walkway E211

214 Duo Lift Parts EQUIPMENT A 2 18 Non-adjustable track only A Key Description M-1000 M-1450 M-1000 M-1450 M Back Axle Front Axle Tongue with safety chains Strut w/spindle less hub, 16 clearance Not used Not used Not used 4 Strut w/spindle less hub, 20 clearance Not used Not used Not used 4A Hub w/bearings, seal, dust cap and bolts H611WP H611WP H611WP H611WP th wheel and pole Tongue bolt Lock nut Leaf slipper spring E5226 E5115 E5226 E5115 E Spring bolt, nut and lock washer U-Bolt, nuts and lock washer for springs Reach pole bolt with lock nut King pin King pin keeper bolt and lock nut Spacer Strut clamp plate Not used Not used Not used 16 Strut bolt, nut and star lock washer Not used Not used Not used 17 Grease fitting, 5th wheel Grease fitting, king pin Wheel Tank support member E212

215 Replacement Hubs ❷ ❸ ❹ ❺ ❻ ❽❾❿ ⓫ ⓬ ⓭ ❷❸ ❹ ❺ ❻❽❾❿ ⓫⓬⓭ 611 Hub: 6-Bolt on 6" Bolt Circle 783 Hub: 6-Bolt on 6" Bolt Circle Item Part# Description Price Seal $ LM29749 Inner Bearing Cone $ LM29710 Inner Cup $ HB Complete Hub $ HB Wheel Bolt $ LM67010 Outer Cup $ LM67048 Outer Bearing Cone $ SL Washer SL Castle Nut $ SL Cotter Pin P Dust Cap $4.90 Item Part# Description Price 2 CR18823 Seal $ LM Inner Bearing Cone $ LM Inner Cup $ HB Complete Hub $ HB Wheel Bolt $ LM67010 Outer Cup $ LM67048 Outer Bearing Cone $ SL Washer SL Castle Nut $ SL Cotter Pin P Dust Cap $4.90 EQUIPMENT " Spindle Nut ID, 6-Bolt Item Part# Description Price 1 13HRM16E Complete Hub $ Grease Seal $ Inner Bearing Cone $ Inner cup $ LM67010 Outer Cup $ LM67048 Outer Bearing Cone $ Washer $ Slotted Nut $ MP2121 Grease Cap $ Lug Nut $ Hub Bolt /4" Spindle Nut ID, 6-Bolt Item Part# Description Price LME Complete Hub $ Grease Seal $ LM48548 Inner Bearing Cone $ LM48510 Inner cup $ LM67010 Outer Cup $ LM67048 Outer Bearing Cone $ Washer $ Slotted Nut $ MP2121 Grease Cap $ Lug Nut $ Hub Bolt 99 E213

216 The Packhorse EQUIPMENT (Black tanks available) Packhorse The Packhorse is a versatile implement when used as a nurse unit to keep the applicator in the field. The Packhorse can be towed from field to field providing the storage for the liquids being applied to the farmers field. The entire frame lowers to the ground level for filling and liquid withdrawal. The Packhorse raises up to transport position for road travel. This is accomplished by actuating the rockshaft on the manual hydraulic system. The trailer shall not be raised or transported unless the tanks are empty. Specifications Overall width: 91" Overall length: 22" Overall height (transport mode): 13'6" 6" Channel frame Safety chains Choice of 2" ball or clevis hitch Two fully supported 3,000 gallon 15 cone bottom tanks 9.5L x 15 tires mounted on 5.5" Implement wheels Lights include turn lights, brake lights and tail lights. Automotive type with 7 way RV Blade plug. Full flow plumbing with full port valves and hose Primed and painted with rust resistant paint to produce an eye appealing color design Piping to permit filling and liquid withdrawal from a single or both tanks simultaneously E214

217 Fairbank Nurse Units 1,000 Gallon Liquid Nurse Unit Fairbank Equipment nurse units are as rugged as they are good looking. If you want the best in the business at a competitive price then give us a call. Available in 1,000 and 1,250 gallon standard and center slope sump units Underslung Slipper Spring Suspension 4,000# Capacity each spring 12" x 12" Rear Fill Step Snyder or Ace Tanks 6 Bolt Hubs & Wheels Hose Storage Hooks Several Tire Options OPTIONS: Strainer Lights Fenders Front Platform Recirculation FEATURES 11L x 15 tires Choice of Banjo cast iron or Poly Pump Hose rack & adjustable hitch Sump tank Duo-Lift 14,000 GVW tandem axle trailer DOT Safety chains 1,000 gallon Snyder or Ace Tank Hose end valve Fully assembled and field ready 15 ft discharge hose Available with standard Briggs or optional Honda Engine Trailer w/1,000 gallon Leg Tank V-Bottom Nurse Unit EQUIPMENT The Chuckwagon It is designed to increase the time you can keep your applicator in the field. This new implement hauls more product! The compact, heavy duty frame design allows you to quickly maneuver in tighter spots to help keep your field applicator spraying acres. The vertical cone bottom design allows better product agitation, faster discharge and complete drainage to create increased production. So, call Fairbank Equipment or your area representative for the latest information. FEATURES: Overall width: 95" Overall length: 175" Overall height: 102" 6" Channel frame Full flow plumbing with full port valves and hose Safety chains Primed and painted with rust resistant paint to produce an attractive color combination Choice of 2" ball or clevis hitch One fully supported 1,200 gallon 15 cone bottom tank. 235/80 R16 road trailer tires OPTIONS: Hose stand Cast iron or poly pump Briggs & Stratton or Honda Engines Lights include turn lights, brake lights and tail lights Automotive type without front connector. (Black tanks available) E215

218 Spreaders - Willmar Willmar has been building some of the best spreaders in the business for over thirty years. Year after year they continue to have a great spread pattern. Available in 5,6 and 8 ton models with standard (77") wheel tread width and a popular narrow track (62") tread width. DRY EQUIPMENT Super 500 Super 500 NT Super 600 Super 600 NT Super 800 Capacity 175 cu. ft. 175 cu. ft. 220 cu. ft 220 cu. ft 270 cu. ft. Weight 2,150 lbs 2,150 lbs 3,100 lbs 3,100 lbs 3,400 lbs Length 181" 181" " " " Height 80" 80" 82" 82" 91" Width 92" 92" 92" 92" 92" Wheel Thread 77" 62" 75" 61" 75" E216

219 Spreaders-Doyle 8 Ton Fertilizer Spreader Hydraulic or PTO Driven Tandem 10,000lbs. axle suspension, 8-bolt hubs Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Hydraulically driven twin "dished" spinners, 24" diameter with 4 blades per spinner, specially designed for accurate spreader broadcasting General Information 8" wide stainless steel mesh conveyor chain 304 Stainless steel hopper Bolt on hopper design Adjustable material divider Heavy duty rectangular steel tubing frame, with heavy duty corner braces DRY EQUIPMENT 6 Ton PTO Spreader 12 or 14 gallon stainless steel hopper Narrow track option available 2" x 6" mild steel tubing frame, with heavy duty mild steel corner braces Heavy duty adjustable hitch Heavy duty 12,000 lbs tongue jack PTO driven E217

220 Row Crop Spreader & Field Loader Conveyor - Doyle DRY EQUIPMENT Row Crop Spreader 102-1/4" wide, #304 stainless steel hopper construction Hopper capacity (water level): 266 cu. ft. 88" overall width or 120" max overall width (2 different models) Hoppers available in 11"-14" length Hopper side slope: 40 2" x 4" #304 stainless steel tubing cross supports 30" wide belt over chain, heavy pintle chain, 3/8" thick cross bars with muli-ply belt Extra heavy duty 6:1 reducer spur gear conveyor drive Includes heavy duty oil cooler with twin fans, 42 gallons per minute Closed loop spinner control Standard with 24" dual dished spinners, mounted on #304 stainless steel undercarriage Material sensor on gate, let's operator know when material is out "Easy-Set" fully adjustable material divider which allows fine adjustment in spread pattern (fertilizer or lime) Hydraulic valve and encoder is mounted towards the front of the box, which keeps it out of corrosive environment at rear of box Includes all LED lighting, with standard 7 pin connector Field Loader Conveyor Standard Features: 24 wide Crescent top belt, with stainless steel lacing Crowned and lagged drive and idler pull Square tubing style take-up assemblies Adjustable discharge chute 2 steel return rollers 1 bearings throughout Direct head drive 20 h.p. Honda gas engine 6 gallon aluminum gas tank 17 gallon metal hydraulic tank 205/75R 15 Tires Tow hitch Factory assembled & tested Optional Hydraulic Mover E218

221 Spreader - New Leader New Leader Litter Spreaders The L5034G4 compost spreader uses patented technology to spread material farther, wider, and more consistently than other applicator. Higher payload capacity and greater material output. Precise record-keeping of environmental material applications. Get the job done more accurately in less time. The New Leader L5034G4 is one of the best built and most versatile compost spreader in the industry. Its superior features allow you to cover more ground in less time - while maintaining an accurate spread pattern - to make your business more profitable than ever. The extra wide 34" (86cm) conveyor and 50 side slopes provide better flow of material and increased output, and the 118" (300cm) wide body increases payload capacity for heavy spreading needs. The noncorrosive stainless steel conveyor floor prevents material build-up under the conveyor, providing longer service life to the overall conveyor system. The L5034G4 also features dual 30" (76cm) spinners and tandem hydraulic pumps to broadcast material faster and farther, and minimize time in the field. Compared to the average compost spreader, spinner power is increased by up to 50%. DRY EQUIPMENT Stainless Steel Roller Chain Chain# Connecting Offset Link SKU Price Link WR50SS AC50C AC $10.93/ft. 2050SS AC2050C AC $9.45/ft Soil Probe Part# SKU Price $84.20 E219

222 Spreader - New Leader L4000G4 Spreaders The New L4000G4 fertilizer and lime spreader provides modular hydraulic packages to suit your spreading needs. Plus you may add a second or third bin at any time for spreading up to three variable rate applications in one pass. This allows you to get the job done more accurately and in less time. DRY EQUIPMENT The New Leader L4000G4 is a culmination of the best of the best! This design provides modular hydraulic packages to suit your spreading needs, plus the ability to add a second or third bin at any time. The L4000G4 standard body width is 102 (258cm) with 6" (15cm) side extensions, and includes a bolted-in rear end gate for greater structural integrity. Choose either a 13' (4m) or 14' (4.3m) length unit depending on your chassis and capacity needs. Choose either painted 409 stainless steel or non-painted 304 stainless steel for additional corrosion resistance. Choose either a #4 belt-over-chain for combination fertilizer/lime applications or a #3 pintle chain for aggressive lime applications. Choose either standard hydraulics for combination fertilizer and lime applications, or high performance hydraulics for heavy lime applications. Add a 5' or 7' MultApplier or MicroBin at any time for spreading up to three variable rate applications in one pass. Spread Pattern Test Kit Test the pattern of your pull and truck spreaders with this test kit. Includes dividers and catch pans. Part# SKU Price $ E220

223 MultiBin Crop Nutrient Applicator on the L4000G4 The MultiBin increases efficiencies by consistently broadcasting materials from three or four bins, independently or together, for straight and variable rate applications. When installed in the L4000G4, the MultiBin transforms a single hopper into three. The micro-nutrient hopper can also be split to create a fourth hopper. The front hoppers dispense fertilizer products while the hoppers at the rear dispense micro-nutrients or seeding products. The large capacities of each hopper allow users to cover more acres and reduce fill time. The rear bins slope forward to improve chassis weight distribution and a new material divider improves material placement on the G4 spinner for a more effective spread pattern. Constructed of 403 stainless steel to prevent corrosion, the MultiBin features an optional micronutrient cover which opens and closes with a stainless steel air cylinder, and optional low-bin sensors in each bin to know when to refill. The MultiBin may be easliy installed and removed from the L4000G4 for single-bin fertilizer or lime spreading. MultiBin Features & Benefits Wider spread patterns reduce time in the field Fewer trips across the field reduce soil compaciton Fewer moving parts compared to air machines reduce maintenace expenses New Leader G4 spinner technology delivers wide, accurate spread patterns, even on windy days DRY EQUIPMENT Fertilizer Density Scales Find weight of fertilizer quickly and accurately. Just fill and level the container with material and slide the weighted balance until bubble appears in level vial. Durable ABS plastic-red. Find weight of fertilizer by filling it and balancing on knife blade-white Part# SKU Price DS $49.00 Part# SKU Price V50X 5154 $57.26 E221

224 Spreaders - Chandler Equipment Chandler Dry and Lime Spreaders Chandler Pull-Type Fertilizer Spreaders are durable, heavyduty and well designed for long-lasting, trouble-free service. The design and construction quality sets the standard in the agri-business industry. All units are offered in corrosive-resistant 304 stainless steel. Chandler Spreaders have been quality checked and tested to provide the best possible spread pattern for your requirements. DRY EQUIPMENT Chandler Model PT 10FSS Fertilizer Spreader Available in five and six ton capacity, this heavy duty spreader is durable, long lasting and accurate. Tandem Axle 6500# Henschen suspension Heavy duty 6 channel frame 8" wide 1x1 stainless steel conveyor chain All ground drive conveyor drive with optional hydraulic engagement All ground drive spinner drive or PTO drive Plate steel conveyor roller Chandler Pull Type Fertilizer/Lime Spreaders Available in five, six and eight ton capacity, this unit will spread both lime and dry fertilizer. Twin dished type spinners, 24" diameter with six blades per spinner. Hydraulic driven spinners 16" wide chain for lime or dry application with various style and widths available Double rack and pinion operated metering gate Plate steel conveyor roller AT-FTLH-EXW (8 ton) 9-PT-FT (5 ton) 20PTT-FT (8 ton) E222

225 Spreader Distribution Parts S-500, S-600, S ft Spread Pattern Parts WR ft Spread Pattern Kit WR25829 Application Rate Decal-11L x 15 tires WR25830 Application Rate Decal-12.5L x 15 tires WR38791 V-Belt WR " Sheave DRY EQUIPMENT Item# Part# Req'd Description 1 NAP 1 Hex. Hd. Cap Screw, 3 8" -16 UNC x 1¾" Lg. (Grade 5) 1 NAP 2 Flat Washer, 3 8" ID Pillow Block Bearing, 1" Bore Lock Washer, 3 8" ID Hex Nut, 3 8" -16 UNC 6 NAP 1 Center Lock Nut, 3 8" - 16 UNC Sq. Hd. Set Screw, 5 16" - 18 UNC x ¾" Lg. 8 NAP 4 Key, ¼" x ¼" Keystock x 1¼" Lg Sheave, 8" Dia., Single Groove, 40ft V-Belt (BB-112), 40ft Sheave, 6" Dia., Deep Groove, "B" Section, 1" Bore, ¼" x ¼" Keyway 12 NAP 1 Carriage Bolt, 5 8" -11 UNC x 2½" Lg. 13 NAP 2 Flat Washer, 5 8" ID V-Idler Sheave, 6½" Dia., 5 8" Bore Lock Washer, 5 8" ID Hex Nut, 5 8" - 11 UNC SS 17 NAP 12 Carriage Bolt, 5 16" - 18 UNC x 1½" Lg. 18 NAP 16 Lock Washer, 5 16" ID Hole Flange Bearing, 1" Bore 20 NAP 16 Hex Nut, 5 16" - 18 UNC Distributor Fan Distributor Blade Kit (Includes Items 22 thru 26) Distributor Blade - Right 23 NAP 16 Hex Hd. Cap Screw, ¼" - 20 UNC x ¾" Lg. (Grade 5) 24 NAP 16 Lock Washer, ¼" ID 25 NAP 16 Hex Nut, ¼" - 20 UNC Distributor Blade - Left 27 NAP 2 Roll Pin, 1 8" Dia. x 1¼" Lg. 28 NAP 4 Hex. Hd. Cap Screw, 5 16"-18 UNC x 1" Lg. (Grade 5) Distributor Mount 30 NAP 2 Hex HD Cap Screw, 3 8" - 16 UNC x 1" Lg. (Grade 5) Splice Pin and Nut Hex HD Cap Screw, ½" - 13 UNC x 5" Lg. SS Hex Nut, ½" - 13 UNC 34 NAP 12 Hex HD Cap Screw, 3 8" - 16 UNC x 1½" Lg. (Grade 5) S-500 Conveyor Chain, 192" Long S-600 & S-800 Conveyor Chain, 243" Long S-500 Rear Line Shaft S-600 & S-800 Line Shaft Front Line Shaft S PTO Shield 39 NAP 1 Hex HD Cap Screw, 3 8" -16 UNC x 1½" Lg. (Grade 5) Take-up Bearing with Relube & 2 Set Screws, 1" Bore Front Roller SS S-500 Conveyor Drive Chain - 41¼" (2050-SS Per Inch) RC-2050SS S-600 & S-800 Conveyor Chain -43¾" - RC- 2050SS CLSS 1 Connector Link, RC-2050SS Rear End Sprocket Rear Drive Roller and Roller Shaft Sq. HD Set Screw, 3 8" - 16 UNC x 5 8" Lg Set Collar - Modified 48 NAP 1 Roller PIN, ¼" Dia. x 1½ Lg Pillow Block Bearing, 1" Bore PTO Assembly - Weasler 540- See page Bulk Conveyor Chain 7" E223

226 Spreader Ground Drive Parts DRY EQUIPMENT Willmar S-500 Ground Drive Parts Item# Part# Req'd Description 1 NAP 4 Hex HD Cap Screw, ¼"-20 UNC x ¾" Lg. (Grade 5) 2 NAP 4 Lockwasher, ¼" ID 3 NAP 1 Hex HD Cap Screw, 5/8" - 18 UNF x 2" Lg. (Grade 5) Lockwasher, 5/8" ID Flat Idler Sheave, 4½" Dia., 5/8" Bore Connector Link, RC Engaging Lever Chain Assembly 8 NAP 2 Flat Washer, SAE 5/8" ID Ground Drive Engaging Arm 10 NAP 1 Cotter Pin, 1/8" Dia., x 1½" Lg 11 NAP 2 Flat Washer, ½" ID Engaging Lever Bushing - Nylon Set Collar, 1" ID Ground Drive Linkage Hex Nut, 3/8" -16 UNC Lock Washer, 3/8" ID W 3 Pillow Block Bearing, 1" Bore Vinyl Grip 20 NAP 4 Hex ID Cap Screw, 3/8" - 16 UNC x 1½" Lg. (Grade 5) 21 NAP 4 Flat Washer, 3/8" ID Drive Sprocket 23 NAP 1 Key, ¼" x ¼" Keystock x 1¼" Lg. 24 NAP 3 Hex Nut, ¼" -20 UNC Spring Hex Nut, ½" -13 UNC Ground Drive Jack Shaft 28" 28 NAP 1 Key, ¼" x ¼" Keystock x 4" Lg Slip Clutch Assy. - Ratchet (includes items 29, 30, 32, 33 & 34) Slip Clutch Nut Slip Clutch Spring Outer Shield Slip Clutch Floating Jaw Slip Clutch Hub Sprocket, 50-A-54, 2" Bore SS 1 Ground Drive Chain, RC-50 x 84 3/8" Lg. Ground Drive Chain, RC-50 x 84 3/8" Lg. SS (Opt.) Willmar S-600/S-800 Ground Drive Parts Item# Part# Req'd Description Cap Screw, ¼" - 20 UNC x ¾" Lg. (Grade 5) Lock Washer, ¼" ID Cap Screw, 5 8" 18 UNF x 2" Lg. (Grade 5) Lock Washer, 5 8" ID Flat Idler Sheave, 4½" Dia., 5 8" Bore 6 50-CLSS 1 Connector Link, RC-50 SS Engaging Lever Chain Assembly 8 L Ground Drive Engaging Arm Cotter Pin, 1 8" Dia., x 1½" Lg Flat Washer, ½" ID Engaging Lever Bushing - Nylon Set Collar, 1" ID Ground Drive Linkage Hex Nut, 3 8" - 16 UNC Lock Washer, 3 8" ID W 2 Pillow Block Bearing, 1" Bore Vinyl Grip Cap Screw, 3 8" - 16 UNC x 1½" Lg. (Grade 5) Flat Washer, 3 8" ID Drive Sprocket Key, ¼" x ¼" Keystock x 1¼ Lg Hex Nut, ¼" - 20 UNC Spring Hex Nut, ½" - 13 UNC Ground Drive Jack Shaft 22-1/2" Key, ¼" x ¼" Keystock x 4" Lg Slip Clutch Assy. (Includes items 28, 29, 31, 32 & 33) Slip Clutch Nut Slip Clutch Spring Outer Shield Slip clutch Floating Jaw Slip Clutch Hub Sprocket, 50-A 43, 2" Bore SS Ground Drive Chain, RC-50 SS x " Lg Flat Washer, SAE 5 8" ID 28" 22-1/2" E224

227 S-500 Parts Item# Part# Req d. Description PTO Support Hex HD Cap Screw, 3 8" - 16 UNC x 1" Lg. (Grade 5) Flat Washer, 3 8" ID Gate Scale Lockwasher, 3 8" ID Hex Nut, 3 8" - 16 UNC Carriage Bolt, 3 8" - 16 UNC x 4 1 2" Lg. (Grade 5) Conveyor Hood Conveyor Hood-SS (Not Shown, used on 409 SS Hopper - Option 00201) Tarp Bow Tarp w/shock Cord Vinyl Grip Flat Washer, 5 16" ID (included w/item 18) Wing Nut (included w/item 18) Rear Gate Set Collar, 3 4" ID Journal Bearing, 3 4" Bore Hex HD Cap Screw, 3 8" 16 UNC x 1 1 4" Lg. (Grade 5) Metering Shaft Serrated Flange Nut, 3 8" - 16 UNC Belt Guide Rear End Hex HD Cap Screw, 3 8" - 16 UNC x 3 4" Lg. (Grade 5) Safety Chain, 5 16" x 3' Lg. w/grab Hook Bushing - Hardwood Wing Nut Divider Carriage Bolt, 3 8" - 16 INC x 1" Lg. SS Rear Deflector Axle Pop Rivet, 3 16" x 3 8" to 1/2" Lg. SS Splash Shield and Bumper Ryertex Floor Plate Center Lock Nut, 5 16" - 18 UNC Hex HD Cap Screw, 5 16" - 18 UNC x 1" Lg. (Grade 5) Rear Belt Shield U-Bolt Center Lock Nut, 9 16" - 18 UNF Shackle Arm Spring Assembly w/bushings Main Leaf Spring (included w/item 39) Retaining Clip & Top (not shown - included w/item 39) Spring Bolt Straight Grease Zerk, 1 4" - 28 UNF Item# Part# Req d. Description Clip Plate Self-Locking Nut, 5 8" - 18 UNF Axle Grease Seal Inner Bearing Cone Inner Bearing Cup (included w/items 50 & 57) Socket HD Set Screw, 1 2" - 20 UNF x 1" Lg. (Grade 5) Ground Drive Hub and Sprocket Hub - Brake w/bearing Cups Outer Bearing Cup (included w/items 50 & 57) Outer Bearing Cone Flat Washer, 7 8" ID (Extra Heavy) Castle Nut, 7 8" - 14 UNF Cotter Pin, 1 8" Dia., x 1 1 2" Lg Hub Cap Hub - Plain w/bearing Cups Equalizer Bolt Equalizer Arm w/bushings Bushing (included w/item 59) for frame Bushing for Leaf Springs Center Lock Nut, 3 4" - 16 UNF Wheel Nut, 1 2" - 20 UNF w/90 Bevel (included w/items 50 & 57) Tire, 11L x 15-8 Ply Tubeless Tire, 12.5L x 15-8 Ply Tubeless (optional) Wheel, 10 x 15-6 Holes on 6" Dia. Bolt Circle Valve Stem w/cap - Rubber Jack Assembly (see replacement parts) Bushing (included w/item 39) Carriage Bolt, 1 2" UNC Full Thread x 2 1 4" Lg Latch PTO Clamp Assembly (includes items 67, 70 and one each of items 33 and 34) PTO Clamp Wheel Stud, 1 2" - 20 UNF x 1 5 8" Lg. (included w/items 50 & 57) Center Lock Nut, 3 8" - 16 UNC PTO Bearing Mount Grease Zerk, 3 8" - 27 NPT Equalizer Hanger Outside Hanger Spring Hanger Hex Nut, 1 2" - 13 UNC Clip (included w/item 18) Chain Guide (not shown, included w/item 49) NOTE: When equipped with optional rope control or single spinner option, item 25 part number is DRY EQUIPMENT E225

228 S-600 Parts DRY EQUIPMENT Item# Part# Req d. Description Brake Actuator Assembly (See Replacement Parts) PTO Support 3 NAP 14 Hex HD Cap Screw, 3 8" - 16 UNC x 1" Lg. (Grade 5) 4 NAP 12 Flat Washer, 3 8" ID Gate Scale Lockwasher, 3 8" ID Hex Nut, 3 8" - 16 UNC Carriage Bolt, 3 8" - 16 UNC x 4 1 2" Lg. (Grade 5) Conveyor Hood Conveyor Hood - SS (not shown, used on 409 SS Hopper Option 00203) Tarp Bow Tarp w/shock Cord Vinyl Grip 13 NAP 1 Flat Washer, 5 16" ID (included w/item 15) Wing Nut (included w/item 15) Metering Shaft Rear Gate Set Collar, 3 4" ID Journal Bearing, 3 4" Bore 19 NAP 3 Hex HD Cap Screw, 3 8" - 16 UNC x 1 1 4" Lg. (Grade 5) Divider 21 NAP 3 Serrated Flange Nut, 3 8" - 16 UNC Belt Guide Rear End Hardwood Tightener Block Box Rod Nut, 3 8" - 16 UNC (See Note) Carriage Bolt, 3 8" - 16 UNC x 1" Lg. SS Rear Deflector Flat Washer, 3 8" I.D., SS Splash Shield and Bumper 30 NAP 26 Rivet, 3/16" x 3 8" to 1 2" Lg. SS Ryertex Floor Plate 32 NAP 3 Center Lock Nut, 5 16" - 18 UNC Rear Belt Shield 34 NAP 3 Hex HD Cap Screw, 5 16" - 18 UNC x 1" Lg. (Grade 5) Center Lock Nut, 3 4" - 16 UNF Tubing Assembly, 50" Lg Frame Tee w/clip Axle U-Bolt Spring Assembly w/bushings Spring Bolt Straight Grease Zerk, 1 4" - 28 UNF Spring Plate Bushing (included w/item 39) Axle Weldment w/brake Flanges Tubing Assembly 17" Lg Ground Drive Hub - Brake Item# Part# Req d. Description 47 NAP 2 Center Lock Nut, 5 16" - 18 UNC 48 NAP 2 Hex HD Cap Screw, 5 16" - 18 UNC x 2" Lg. (Grade 5) Shackle Arm w/o Stops Center Lock Nut, 1" - 14 UNF Equalizer Arm w/bushings Bushings (included w/item 51) Bushings (included w/item 51) Equalizer Bolt Hub Cap Spindle Nut, 1" - 14 UNF Wheel Bolt Nut, 9 16" - 18 UNF Wheel Bolt, 9 16" - 18 UNF x 1 1 2" Lg. (Grade 5) Brake Drum Hex, Head Cap Screw, 1 2" - 20 UNF x 1" Lg. (Grade 5) L.H. Brake Cluster Assembly R.H. Brake Cluster Assembly Tubing Assembly, 2 1 2" Lg. 63 NAP 4 Cotter Pin, 3 16" Dia., 1 1 2" Lg Chain Guide (Not Shown, included w/item 46) Spindle Washer, 1" I.D Outer Bearing Cone Outer Bearing Cup (included w/item 67) Hub w/nearing Cups Inner Bearing Cup (included w/item 67) Inner Bearing Cone Grease Seal Wheel Brake Line Kit w/fittings (includes Items 36, 67, 45, 62, 61, 71, 72 and 77 thru 80) Tubing Assembly, 45" Lg Hydraulic Hose Assembly, " Lg. 73 NAP 6 Hex HD Cap Screw, 3 8" - 16 UNC x 3 4" Lg. (Grade 5) 74 NAP 4 Tire, 19L x 16.1, 10 Ply Tubeless Wheel, 11 x NAP 4 Valve Stem w/cap, Rubber Hose Bracket Hose Clip Tubing Assembly, 82" Lg Hydraulic Hose Assembly, 13" Lg W 1 Jack Assembly (See Replacement Parts) Safety Chain 5 16" x 3' Lg. w/ 5 16" Grab hook Hex Nut, 1 2" - 20 UNF Quick Link, 3 8" Latch PTO Clamp Assembly (includes Items 85, 86 and One each of items 32 and 34) PTO Clamp 87 NAP 16 Nut, 3 4" - 16 UNF (Nylock) Grease Zerk, 1 8" - 27 NPT E226 NOTE: When Equipped With Optional Rope Control Item 25 Part #3 is

229 S-800 Parts Item Part No.Req d. Description PTO Mount 2 NAP 14 Hex HD Cap Screw, 3 8" - 16 UNC x 1" Lg. (Grade 5) 3 NAP 12 Flat Washer, 3 8" ID Gate Scale Lockwasher, 3 8" ID Hex Nut, 3 8" - 16 UNC Carriage Bolt, 3 8" - 16 UNC x 4 1 2" Lg. (Grade 5) Conveyor Hood Conveyor Hood-SS (not shown, used on 409 SS Hopper - option 00202) Tarp Bow Tarp w/shock Cord Vinyl Grip Wing Nut (included w/item 13) Metering Shaft Rear Gate Set Collar, 3 4" ID Journal Bearing, 3/4" Bore 17 NAP 3 Hex HD Cap Screw, 3 8" - 16 UNC x 1 1/4" Lg. (Grade 5) Divider 19 NAP 3 Serrated Flange Nut, 3 8" - 16 UNC Belt Guide Rear End 22 NAP 6 Hex HD Screw, 3 8" - 16 UNC x 3 4" Lg. (Grade 5) Hardwood Tightener Block Box Rod Nut, 3 8" - 16 UNC (See Note) Carriage Bolt, 3 8" - 16 UNC x 1" Lg. SS Rear Deflector Flat Washer, 3 8" ID, SS Splash Shield and Bumper 29 NAP 26 Rivet, 3 16" x 3 8" to 1 2" Lg. SS Ryertex Floor Plate 31 NAP 3 Center Lock Nut, 5/16" - 18 UNC Rear Belt Shield 33 NAP 3 Hex HD Cap Screw, 5/16" - 18 UNC x 1" Lg. (Grade 5) Center Lock Nut, 3 4" - 16 UNF Axle U-Bolt Spring Assembly w/bushings Bushing (included w/item 36) Spring Bolt Straight Grease Zerk, 1 4" - 28 UNF Spring Plate Axle Weldment w/o Brake Flanges Grease Seal Inner Bearing Cone Inner Bearing Cup (included w/item 47) Hub Item Part No.Req d. Description Wheel Bolt, 9 16" - 18 UNF x 2 1 2" Lg. (Grade 5) Hub w/bearing Cups Wheel Bolt Nut, 9 16" - 18 UNF Outer Bearing Cup (included w/item 47) Outer Bearing Cone Spindle Washer, 1" ID Spindle Nut, 1" -1 4 UNF 53 NAP 4 Cotter Pin, 3 16" Dia. x 1 1/2" Lg Hub Cap Brake Drum Hex HD Cap Screw, 1 2" - 20 UNF x 1" Lg. (Grade 5) L.H. Brake Cluster Assembly R.H. Brake Cluster Assembly Axle Weldment w/brake Flanges Equalizer Bolt Shackle Arm w/o Stops Equalizer Arm w/bushings Bushing (included w/item 61) Bushing (included w/item 61) Center Lock Nut, 1" - 14 UNF Hex Nut, 1 2" - 20 UNF Wheel Brake Line Kit w/fittings (includes items 66 thru 69 and 73 thru 76) Tubing Assembly 17" Lg Frame Tee w/clip Hydraulic Hose Assembly, " Lg Tubing Assembly, 50" Lg. 70 NAP 4 Tire, 16.5L x 16.1, 8 Ply Tubeless NAP 4 Tire, 19L x 16.1, 10 Ply Tubeless (Optional) Wheel 11 x NAP 4 Valve Stem w/cap, Rubber Hose Clip Hose Bracket Tubing Assembly, 82" Lg Hydraulic Hose Assembly, 13" Lg W 1 Jack Assembly (See Replacement Parts) Safety Chain, 5 16" x 3' Lg. w/ 5 16" Grab Hook Brake Actuator Assembly (See Replacement Parts) 80 NAP 1 Flat Washer, 5 16" I.D. (included w/item 13) Quick Link, 3 8" Chain Guide (Not Shown, included w/item 45) Latch PTO Clamp Assembly (included items 82, 83 and One each of items 31 and 33) PTO Clamp 84 NAP 16 Nut, 3 4" - 16 UNF (Nylock) Grease Zerk, 1 8" - 27 NPT DRY EQUIPMENT NOTE: When Equipped With Optional Rope Control Item 24 Part # is E227

230 Dual Spinner Spreaders Spread Pattern Dual Spinner Spreaders Before attempting any spread pattern adjustment, determine the actual spread pattern. The spread pattern test kit used cat. number 00108A is available through Willmar Manufacturing. If spread pattern adjustments are needed, follow the instructions in the illustration below. CAUTION ADJUST BLADES ONLY ON BASIS OF ACCURANTE SPREAD PATTERN MEASURE- MENT. WILLMAR MANUFACTURING IS NOT RESPONSIBLE FOR CROP LOSS DUE TO AN IMPROPERLY ADJUSTED SPREADER. DRY EQUIPMENT E228

231 Single Spinner Spreaders Spread Pattern Single Spinner Spreaders Before attempting any spread pattern adjustment, determine the actual spread pattern. The spread pattern test kit used cat. number 00108A is available through Willmar Manufacturing. If spread pattern adjustments are needed, follow the instructions in the illustration below. CAUTION ADJUST BLADES ONLY ON BASIS OF ACCURATE SPREAD PATTERN MEASUREMENT. WILLMAR MANUFACTURING IS NOT RESPONSIBLE FOR CROP LOSS DUE TO AN IMPROPERLY ADJUSTED SPREADER. DRY EQUIPMENT E229

232 1600 Tender The new 1600 tender continues the legendary Willmar commitment of material handling excellence based upon a durable design with high performance standards. The 500-cubic foot capacity hopper consists of two 250 cubic foot compartments. The tender is 96 inches wide, 192 inches long, and has a 30 degree minimum slope. The 1600 tender is complete with 10 inch diameter by 19 or 21 ft rear discharge auger, front and rear ladders on driver side, stainless steel control gate and track, clean out dump gate, self contained hydraulic system with PTO Drive, light package, fenders and mud flaps. DRY EQUIPMENT FEATURES: 30 Tender slope angle 14 gauge stainless steel hopper Two stainless steel control gates adjust product flow 19 ft x 10" stainless steel auger tube and screw Hydraulic auger drive Hydraulic auger on/off control Hydraulic auger raise/lower control at left rear corner Two compartment hopper DOT light package Self contained hydraulic system 10 gallon hydraulic oil reservoir Oil level sight glass Oil temperature gauge In tank suction strainer 10 micron replaceable filter 2 part epoxy primer White acrylic enamel Fenders Mud Flaps OPTIONS: 21 ft stainless steel auger Roll top tarp Flip top tarp E230

233 Sideshooter Tender Willmar sideshooter tenders deliver material handling excellence through rugged durability and reliable performance. Features include 409 SS multiple compartment hoppers (4 on 16 ton, 6 on 24 ton) with 40 sloped sides for complete product clean-out. A patented 10 inch x 17 ft 409 stainless steel, single piece swing-away auger offers up to 4000 pounds per minute unloading capacity with individual hydraulic auger controls. The front ladder provides easy access to the viewing platforms and hopper. STANDARD EQUIPMENT 40 fast flow sides Both belly and rear dump capability Hopper access ladder 10 inch x 17ft 409ss hydraulic discharge auger with hydraulic raise, lower & swing Hydraulic driven auger with individual shut off controls Viewing platforms 25 gallon hydraulic oil reservoir with a 10 micron oil filter, relief valves, fittings and hydraulic hoses. DOT Light Kit High performance 2 component epoxy primer Two mud flaps Full set of decals including safety, operation and maintenance in English Polyurethane high performance 2 component paint OPTIONS: Remote mount pump with hardware Includes hydraulic pump, pump mount, brackets, drive shaft, u-joint shield, fittings and fasteners. Sidewinder tarp 96" x 192" 16oz. neoprene treated tarp opens and closes with a turn from a ground level crank. DRY EQUIPMENT (Tenders shown with optional side extensions.) Specifications Capacity Struck Capacity Weight Hopper Length Hopper Width 16 ton 516 cu ft. 570 cu ft. 4,940 lbs 192" 96" E231

234 Sideshooter Tender Fast and efficient unloading translates into convenience and profitability in the fertilizer tender business. That s why rapid unloading is a design priority with Willmar tenders, whatever your size choice. Their 10-inch augers transfer potash at up to 4,000 lbs. per minute and 40-degree fast flow sides keep material flowing out of the multiple compartment hopper. Willmar tenders are manufactured from 409 stainless steel and finished with a special epoxy primer and modified acrylic urethane paint for maximum corrosion protection. The 10-inch by 17-foot single piece, swing-away auger is also made of 409 steel and coated with the same corrosion resistant finish. Multiple compartments enable simultaneous use of a single tender for seed, blended fertilizer and micronutrients or a single product. Slide gates on each compartment offer individual hopper unloading, while a bottom dump gate offers pit unloading as well as fast hopper clean out. When not being used for crop inputs, Willmar tenders are equally suited for feed and grain transport. DRY EQUIPMENT 24 ton SideShooter Tender Specifications Capacity Struck Capacity Weight Hopper Length Hopper Width 24 ton 774 cu ft. 855 cu ft. 7,200 lbs 288" 96" E232

235 Tenders Chandler Tenders are quality made from your choice of mild steel, 409 or 316 stainless steel. FEATURES Stainless gate slides Stainless gate sleeves and shafts Stainless gate fasteners Stainless transition box Stainless hopper boot Stainless hanger shaft Stainless hanger pipes Front mounted lander Catwalks Auger clean out door Tarp support Two compartments OPTIONS Stainless hopper and compartment bulkhead Stainless gussets and catwalks Stainless auger tube Stainless flighting mounted on stainless pipe Extra ladders Roll top tarp Specifications 10 Ton 16 Tone Rear 16 Ton Side 24 Ton Side Hopper Capacity 330 cu ft. 496 cu ft. 495 cu ft. 740 cu ft. Payload (Heaped) 24,000 lbs 32,240 lbs 32,175 lbs 48,100 lbs Hopper Length 12' 16' 16' 24' Hopper Width 8' 8' 8' 8' Hopper Height Above Truck Frame 6'6" 7' 7' 7' Auger Tube Size 10" 10" 10" 10" Discharge Capacity 3500lbs/min 3500lbs/min 3500lbs/min 3500lbs/min Max Discharge Height 11' 11' 13' 3" 12' 4" Minimum Discharge Height 7' 8" 7' 8" 11' 7" 11' 7" DRY EQUIPMENT E233

236 Doyle Tender Truck Mounted, Rear Discharge Single hopper twin compartment design Hopper capacity: 330 cu. ft. Fertilizer auger tender D.O.T. approved lights, tail and marker Hydraulically operated 1.75 ton per minute discharge rate Truck mounted Powder coated, 409 stainless steel, hopper 10" stainless tube with stainless flighted auger DRY EQUIPMENT Truck Mounted, Side Discharge (2) 241 cu. ft. compartments in 12 ga. 304 stainless steel 10" x 12 ga. 304 stainless steel auger tube, and augers with 304 stainless steel flighting and mils steel pipe 1.75 ton per minute discharge rate Hydraulic pump, cylinders, lines, hoses and fittings Stainless steel manually operated slide gates 20ft. hydraulically raised and lowered discharge auger, 14 ft. discharge height 18.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Trailer Mounted, Side Discharge Comes in 8, 24 and 32 foot increments (1&3) 258 cu. ft. compartment in 12 ga. 304 stainless steel 304 stainless steel auger tube 304 stainless steel auger flighting on mild steel pipe Heavy duty mild steel square tubing main frame, with mild steel "boxed" support arm and cross braces Tandem 10,000 lb. axle suspension, with 8-bolt hubs 27 HP Honda motor with direct mount pump Trailer Mounted, Rear Discharge (2) 165 cu. ft. compartments in 12 ga. 304 stainless steel 10" x 12 ga. 304 stainless steel auger tube, and augers with 304 stainless flighting and mils steel pipe 20 ft. hydraulically raised and lowered discharge auger, 14 foot discharge height Heavy duty 304 stainless steel square tubing main frame 1.75 ton per minute discharge rate Stainless steel manually operated slides gates Tender with front and rear ladder E234

237 Roll Tarp Systems & Off-Road Lights AUTOLOCK Electric Tarp Motor is constructed of stainless steel housing and sprocket with nickel plated chain which are durable and resistant to corrosion Unique Dual Drive system has a wind resistant design featuring a strong synthetic cable and tension spring that work together to provide a powerful front and rear drive to cover your load Rotating and telescoping motor mount allows roll tube to rise and flex over heaped loads, reducing stress on the drive components and pivot arm Extra durable 3" aluminum roll tube is strong, yet lightweight offering a faster and straighter roll EZ-LOC Roll-Up Tarp 2" aluminum roll tube is rust resistant and strong, yet lightweight to minimize tarp wear Rope channel design creates uniform tarp tension for a better fitting and longer lasting tarp Custom end caps with crimped standing seam is self sealing, flexible with no welds to break Commercial grade, 18 oz vinyl fabric remains flexible at -40 Quick release aluminum tarp stops with integrated set screw Heavy duty zinc plated U-join with 21 splines for fine tuning tarp tension EQUIPMENT E235

238 Roll Tarp Systems SRT-2 Spool Roll Tarp Spring loaded spools provide consisten tarp tension at any stop point while rolling and unrolling, even in windy conditions Tension ratches allow for fine tuning tarp tension during initial install, no need to adjust Extra Durable 3" aluminum roll tube is strong, yet lightweight offering a faster and straighter roll Rope channel design creates uniform tarp tension for a better fitting and longer lasting tarp Telescoping crank handle with flex drive system rolls and unrolls tarp at many angles with ease Premium commercial grade, 18 oz vinyl fabric EQUIPMENT Roltec Electric Tarp Conversion Motor controls the tension of the tarp, when heaped loads settle, touch switch to tighten tarp Worm gears create an instant, positive lock Pivot arm motor mount allow roll tube to rise and flex over heaped loads, reducing stress on the drive components and pivot arm 4 springs create positive return tension when closing the tarp system, no elbows or joints to break Universal mounting bracket is sturdy, lightweight, with a universal fit E236

239 Roll-Up Cover EQUIPMENT E237

240 SRT-2 Hardware EQUIPMENT E238

241 R&R Dry Handling Equipment Do you need a new dry plant? Or maybe just some new conveyors for your current dry plant? Call Fairbank and we will do an on-site evaluation to help streamline your facility with R & R Dry Handling Equipment. R&R Fertilizer Handling Equipment Minuteman 2 Fertilizer Weigh and Blend Systems Low inload height of 5ft 9" Unobstructed 4 x 8 hopper Only 25hp for 8 ton blender No Belts EQUIPMENT Undercar Chainbelt, Elevating Undercar Portable Conveyors E239

242 KSI Conveyors EQUIPMENT Undercar Conveyors Cleated Belt Conveyors Truck Load out Conveyors Underbin Conveyors Convert your dry fertilizer tender to a combination seed or fertilizer unit. E240

243 Seed Express With the grower in mind, Meridian offers a variety of bulk seed tenders to satisfy any size of operation. Meridian s lineup starts with the 110BST, which has a single compartment and polycup auger and extends to the 400SLD which has two compartments and a multitude of features. The 110BST and 225RST both have 6 polycup augers and a variable speed switch mounted at the end of the spout so you can control how much seed you are putting in. Their proven design is very user friendly and has been helping fill planters for many years. With the growth of the bulk fill planters, Meridian was asked to develop a seed tender to meet the need for self loading. Meridian s model, which features our Patented Cleated Conveyor Belt, starts with the 240 which has features such as hydraulic raise/lower and belt operation of a 6 conveyor. The 240RT and 375RT models have standard features such as a 5 function wireless remote which controls: engine start/stop, hydraulic gates, conveyor swing, conveyor elevation and conveyor belt movement. Both RT models provide the grower the choice between a 6 conveyor with an 8 cleated belt or an 8 conveyor with a 12 cleated belt, as well as the ability to weigh product with an optional scale package. Meridian s 400SLD features a 6" conveyor with an 8" cleated belt or an 8 conveyor with a 12 cleated belt which is hydraulically raised/ lowered and driven. The conveyor on the 400SLD manually swings easily from front to rear of the tender - simply position the conveyor, open the gate open and engage the conveyor. With the 12 belt you can move up to 2,500 lb/min so your planet box will be full in a short amount of time. Like Meridian s RT model, the 400SLD has a wireless remote with the addition of a scale display built into the remote, giving you the ability to do other tasks while filling your boxes. Add the Auto Convey option and filling the seed box just got easier. Set the system to the desired amount and push the button and you can go focus on other items. Lastly, through the many years Meridian has been producing seed tenders we have seen the growing need for scales, talc/ graphite applicators and automated filling. In response, we have developed solutions to meet these requirements. Please ask your dealer about everything Meridian has to offer you. 240BWT The Seed Express 240BWT is designed for the farmer who purchases seed in bulk bags or from a SeedMax Bulk Seed facility. Its dual compartments have a bulk holding capacity of 192 bushels. Equipped with the cleated belt conveyor, the Seed Express 240BWT ensures superior seed quality while handling a large volume of seed. The electronic scale system takes the guess work out of your planting season, placing equal amounts of seed in your planter boxes. The 240BWT can also function as a weigh wagon during the harvest season. The BWT package includes the T14000ST trailer. The Seed Express 240BWT works great for handling commodities like corn, beans, rice, peanuts, cotton, wheat, and oats. Standard Features: 180 Swing most variable conveyor available Ultimate Reach Conveyor 8" Conveyor with 12" Cleated Belt Conveyor transfer volume estimated at 1500#/min Variable speed control your flow Lower Throttle Control Kit Two separate compartments Rolled tarp Capacity: 240 Units/192 Bushels Trailer (comes with tender): T14000ST 32 Conveyor incline Powder coated durable and glossy 9 HP Electric start Honda gas engine Shut off gates Rubber lined hood Scale with digital readout Sample gates (U.S. Patent# 6,396,003) Package includes T14000ST trailer EQUIPMENT Many Other Models and Styles are Available 840 SR2 225RST 110BST 400SLD 1050 SR2 E241

244 Meridian Bins Seedmax Bins Meridian s smooth-wall SeedMax Storage Bins have been designed specifically to accommodate any type of dry flowable seed products. Our product offering includes a variety of sizes ranging from 500 bushels up to 5,000 bushels. Bulk Seed Storage sites are designed by our trained dealers, in any bin size configuration to accommodate your operation. Seed Max bins are designed to provide you the safest and most cost effective storage solution for your seed products. EQUIPMENT FEATURES Internal Seed Ladder Cone manway Access ladder 25" Vented remote lid Roof manhole Two view glasses Rack and pinion slide gate 36" Clearance Welded seam construction Enamel top coat exterior Probe hole for seed sampling 40 cone bottom ACCESSORIES Electric rack & pinion slide gate Steel Base Ladder cage packages Aeration Multi-Purpose Fertilizer Bins Meridian Built Fertilizer Bins are the most versatile, multi-purpose hopper bins available today. Used most often to store and handle fertilizer, grain, feed and seed, their versatility extends to coal, sand and any other free-flowing, dry granular commodity. Historically, many famers view the Fertilizer Bin as too costly for anything but fertilizer storage. However, in recent years, the advantages of smooth-wall hopper storage has farmers everywhere saving time and money with Meridian multi-purpose bins. Now they re saying, Wish we had bought them sooner! Each Meridian Built Fertilizer Bin offers heavy-duty, No Compromise construction. These tough bins are completely pre-welded, inspected, and then treated with Meridian s Premium powder coating inside and out. The special powder chemistry allows for many years of corrosion and abrasion resistance even with fertilizer storage. FEATURES All welded, smooth-wall construction HSS (Hollow structural steel) legs and bracing Premium Rack-n-Pinion slide gate with crank Full sidewall and roof ladder with retractable bottom safety Vented Top Lid-Spring loaded/ground operated Min. 40 bottom cone and 35 roof cone 25" top opening 24" clearance under the slide gate ACCESSORIES Aeration Systems Bottom Manway Roof Manhole Bin Level Indicators Poke Hole Ladder cage Ladder handrails Bean ladders Steel Base E242

245 KSI Bulk Seed Systems Let Fairbank Equipment help you with a new bulk seed system. EQUIPMENT Fairbank Equipment can help design your new bulk seed system. Complete Conveyor System Design around 2000 bushels/hour Powder Coated Paint and Galvanized Construction Cleated Belt Technology Self Cleaning Conveyors, Complete Enclosed Return E243

246 Wacker Neuson All the loaders below are available with an air conditioned cab, heating with fan and defrost vents. They have articulated steering and come in a variety of different sizes for whatever your need. Call us to get yours today! WL50 Overall Length 17' 9" Overall Width 6' Bucket Capacity.98 cu yd Breakout Force 7711 lbf Lifting Capacity 9761lbs Deutz TD2011 L04w Air Conditioned WL34 EQUIPMENT Overall Length 16' 2" Overall Width 5' 6" Bucket Capacity.75 cu yd Breakout Force 8,768 lbf Lifting Capacity 8,331lbs Perkins 404F-22 Tier IV Final Air Conditioned WL38 Overall Length 16' 10" Overall Width 4' 11" Bucket Capacity 1.0 cu yd Breakout Force 8,768 lbf Lifting Capacity 8,331 lbs Deutz TCD 2.9 L4 Tier IV Final Air Conditioned WL32 Overall Length 15' 9" Overall Width 4' 7" Bucket Capacity.5 cu yd Breakout Force 9,082 lbf Lifting Capacity 7,259 lbs Perkins Tier IV Final Air Conditioned E244

247 Wacker Neuson 750T Wacker Neuson telescopic all wheel steer wheel loader is a fully fledged wheel loader with extra reach and stacking/dumping height. It is a wheel loader, stacker and tool carrier rolled into one. Basic functions are as good as you get, optimized power to weight ratio, high stability plus that important extra lift and dump height. FEATURES Excellent gradeabillity and traction with locking differentials on the front axle. With a dumping height of over 13 feet, even the hard to reach areas are accessible. DIMENSIONS A Height in B Length in C Overall Width 67.7 in D Ground Clearance 11.8 in E Wheelbase 75.6 in F Center of front axle to tip of teeth 87.8 in G Center of rear axle to end of vehicle 53.2 in H Bucket width 68.9 in I Bucket pivot point extended in J Overhead loading height extended in K Duping height extended in L Dump reach extended 48.4 in Stack height extended in EQUIPMENT SW 28 The SW 28 Vertical Lift Skid Steer delivers 2,800 pounds of rated operating capacity at 50% and a lift height up to 134 inches. The machine is equipped with a 74.3 HP turbocharged Perkins Tier IV Final engine. Available in both H-Pattern and ISO joystick pilot controls, the machines can fit the preferences of any user. The ergonomically designed controls and pressurized cab delivers comfort and visibility, reducing operator fatigue and increasing safety. E245

248 Sprayer Trailers Neville built sprayer trailers are designed to transport your sprayers safely and quickly. We offer rigid or expandable trailers up to 12 ft wide in either fifth wheel or pintle hitch styles. A variety of tire and wheel combinations are available, as well as spring or air-ride suspensions. Available for all types of row crop sprayers including: Willmar, Spray Coupe, RoGator, Case IH and John Deere. EQUIPMENT DuoLift Sprayer Trailers are designed to safely haul your sprayer at highway speeds, reducing time spent between fields and extending the life of your sprayer. All trailers are manufactured with high speed axles, hubs, wheels, tires, brakes and an underslung slipper-spring suspension. Available for all types of sprayers. E246

249 Capstan PinPoint Pinpoints accurate product application and significant gains in efficiency. Individual nozzle overlap shut off Turn compensation Nozzle-valve diagnostics User-friendly operator interface Remote-control "Key Fob" to check nozzles Instant ON/OFF at the tip SharpShooter with Rate Sync SharpShooter uses Blended Pulse technology featuring Pulse Width Modulation (PWM) to maintain constant sprayer pressure no matter what rate or speed your sprayer is traveling. This systems unique ability to control pressure and rate provides an unprecedented operational range for your sprayer. It allows up to an 8:1 speed range which means you can choose one tip that can apply from 3mph to 24 mph while still maintaining constant pressure, rate and droplet size. EQUIPMENT N-Ject NH3 Designed specifically for anhydrous ammonia, Capstan Ag Systems' N-Ject NH3 system transforms your toolbar from ordinary to extraordinary by providing amazing accuracy despite adverse conditions such as hilly or flat terrains, variable tank pressure or wide rate applications ranges. N-Ject LF A truly responsive variable rate application system Even flow distribution across the toolbar through metering action, accuracy and speed of the PWM nozzles Instant ON/OFF controll is achieved by the nozzles and capillary action of the hoses Automatic boom section control E247

250 AgSynergy Straight coulter minimizes side wall compaction Versatile in a wide variety of conditions and tillage practices as well as no till and heavy residue Open design, easy access, minimizes plugging Low operating cost Each row unit has 20" of vertical, independent working range. Independent hydraulic cylinders allow for excellent row unit travel STI blade followed by placement knife with shatterwing, both of which are adjustable to application depths of 4", 5" or 6". Dual placement of anhydrous ammonia, with liquid or dry available 5 side-to-side oscillation provides superior trailing in contoured ground EQUIPMENT Minimum amount of soil disturbance E248

251 Amity Soil Probes 2024 ATV Mount Offers fast and precise auger-based soil sample collection. Optional short sample attachment 1" diameter auger - Model 2012 special designed carbide tipped auger Automated collection up to 20 samples ¾" diameter auger Optional power pack cover available Sample all types of soil including frozen ground Push button controls with cord Low profile 6.5 hp Honda power pack SPECIFICATIONS: Sample Depth 0-24" Hydraulic Motors 2 Cycle Time 4-16 sec. Approx Weight 210 lbs EQUIPMENT Model 2450 Pickup Mounted Probe Automated collection up to 25 samples Easily adjusts to lay down position Electric over hydraulic power unit Push button remote control with cord Adjustable height variations for pickup models Stainless steel sampling parts SPECIFICATIONS: Sample Depth 0-24" Down Force 3,500 lbs Cylinder 1.5" Cycle Time Approx Weight sec. 225 lbs E249

252 Murray Equipment Introducing Fairbank Equipment's new partnership with the industry leader in plant automation equipment. Murray Equipment Liquid Fertilizer/Chemical Loadout Skids Quickly automate your liquid fertilizer and chemical loadout procedures. These pre-assembled skids save you installation time and money, allowing you to start reaping the benefits of automation right away. EQUIPMENT FEATURES Control up to 10 fertilizers or micronutrients Standard 250 GPM stainless steel pump Weights-and-Measures approved 2 stainless steel mass flow meter Multiple loading point options with auto and manual operation Filtered loadout line Preset loadout values Sequential product delivery Automatic compensation overrun Timed air purge Load transaction ticket printing Compatible with: MEI Interface, 3rd party software. "Easily transfer fertilizer and value-added products from storage tanks into cage tanks, nurse tanks, and tractor trailers." Dimensions: 54 Width x 144 Length x 5 Height Options: 350 GPM pump/3" mass flow meter; 450 GPM pump/3" mass flow meter; 650 GPM pump/4" mass flow meter (Call For Details & Current Pricing) E250

253 Control Panels MEI ICS SERIES LOADOUT CONTROLS Automate the blending and loadout of your liquid fertilizer and crop chemicals with these user-friendly, yet sophisticated control systems. Improve your efficiency and raise the quality of your finished products with MEI Integrated Control Systems (ICS) series controls. Engineered to operate as stand-alone units or in conjunction with other MEI automation products, the ICS series allows you to take advantage of the latest field technology. These control systems are field-tested and operator-approved for ease-of-use and reliability. ICS PRESET-1 This entry-level, stand-alone panel controls a single pump, single valve, and single meter, ensuring precision and accuracy. It allows you to preset the desired output amount and loadout the product with ease. ICSFE PRESET-8 This mid-level batch control panel can load out and meter up to 8 accurately through individual or common meters using individual or common pumps. ICSFE 120 The ICS 120 is an all-in-one PLC-based control panel with built-in color touchscreen monitor. It is capable of metering up to 12 products simultaneously or sequentially. EQUIPMENT ICS Up to 20 configurable products Up to 2 points of load out simultaneously 12 flow meter inputs (4 high speed and 8 standard inputs) 8 Configurable outputs 15 sunlight readable industrial touchscreen monitor (1500 NIT) Detailed transaction reporting Multiple bill of lading formats to satisfy local regulations Digital bill of ladings (PDF) System notification s (Digital BOL) FTP/SFTP server for integration into various enterprise software Systems can support multiple office system (and vice versa) Unlimited product owners with segregated tracking Unlimited customers, drivers and trucks Driver & truck tracking Remote control from office and other digital devices for truck driver support Four points of authentication Pump protection meter fault protection Industrial battery backup for date integrity and over/under voltage protection Internal circuit breakers and surge protection Manual override control switches Components are installed and prewired in a 30 x 24 x 12 NEMA 4x fiberglass electrical enclosure Level system integration for low tank level shut down in a custody transfer application Murray Home & Remote Software Version 7.0 UNATTENDED LOADOUT CONTROLS Service your customers 24/7 with MEI s Unattended Loadout System, significantly reducing wait-times during busy season. This state-ofthe-art NTEP-approved system controls up to 20 products and multiple loadout points simultaneously. It s field-proven and driver friendly. Equipped with security tools, home-office remote control, and manual override controls, this system is ready to handle the challenges of your business. Unattended Loadout Options ICS 24/7-SIGN Electronic signature capture pad ICS 24/7-GATE Gate/Door opener panel ICS 24/7-PRINT High-capacity thermal printer ICS 24/7-VALVE Valve position indication panel E251

254 Automation Bulk Chemical System Configurable bulk storage and dispensing systems Dry Impregnation/Chemical Dispensing System Multi-Product Pump & Meter Stand Need to inject multiple chemicals into your dry fertilizer blends? Or, are you a chemical dealer in need of an efficient dispensing solution? Either way, these dual-purpose multi-product pump and meter stand gives you the accuracy, precision, and speed you need to deliver and/or inject liquids. All meters are NTEP-approved for the resale of chemicals. Valve box (as shown) is optional. EQUIPMENT Call us for Plant Computerization Platform Scales 4' x 4' x 2K & 4' x 4' x 5K SS Indicator & Scale Cable Set up & ready to use Poly Premix Tanks Used in many applications, this poly premix unit is an affordable liquid and dry chemical mixing/ injection system. 30 gallon polyethylene tank MP Flowmax 5 2 HP single/1 phase pump Recirculating plumbing MicroMotion Mass Flow Meters Elite Series 1"- 4" Flanged Meter Size Gallons/Minute 1" Mass Sensor ½" Mass Sensor " Mass Sensor " Mass Sensor " Mass Sensor 120-1,200 4" Mass Sensor 120-1,240 4" Mass Sensor 144-1,400 Fertilizer Pumps Scot and Vertiflo pumps Chemical Pumps Stainless Steel & Cast Iron 1½" & 2" model available Chemical Meters TCS 1½" up to 40GPM FPP 1"-2" up to 60GPM E252

255 Polyethylene Pipe Fittings EQUIPMENT High Density Pipe High Density Polyethylene (HDPE) Pipe is an exceptional piping product well-suited for a broad range of demanding applications. With its strong, butt-fused joints and long-term ductility, HDPE pipe can be installed in numerous ways. Fairbank Equipment is your distributor of HDPE piping systems, fusion equipment, and your primary resource for all of your HDPE piping needs. FITTING TYPES: 45 Elbow 90 Elbow Cross Tee Transition Fitting Back Up Ring Flange Adapter Branch Saddles Wyes-Three-Segment Reducer E253

256 Compressors & Refrigerated Dryers Two-Stage Gas-powered Air Compressors Ingersoll Rand's two-stage gasoline engine driven air compressors are designed to provide compressed air where electric power is not readily available. They're used in fleet and field service applications, remote pneumatic applications and emergency production lines. FEATURES: Available with easy-starting Honda, or Kohler engines Fuel-efficient idle control Advanced safety features including low oil level shutdown for gas engines EQUIPMENT Single-Stage Air Compressors Configured in space-saving stationary and portable models, these durable compressors are a favorite with DIY homeowners and in the construction industry. FEATURES: Industry-leading 5,000-8,000 hour design life Industrial-quality cast iron construction Reliable high-speed valve design Fully-balanced crankshaft that reduces vibration 135psi max. discharge pressure Honda engine-driven wheel barrow compressor Selection guide We can help you customize your order, so you only get what you need. Call today to hear about all your options. Select Your Compressor Stationary Portable Choose Your Air Quality Shop Quality Air Dry, Clean Air Critical Quality Air Select Your System Controls and Accessories IntelliFlow Pneumatic Flow Controller EZ-line SimplAir Compressed Air Piping EDV Electronic Drain Valve D-EC High Efficiency Cycling Dryers The D-EC cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a noncycling design. to reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit. Refrigerated Dryers Corrosion-resistant heat exchangers, an enhanced control-system and high-efficiency moistureseperation ensure a steady long-term supply of dry air. This virtually eliminates cost due to ruined product finishes, scrapped materials or replacement of pneumatic tools and manufacturing equipment destroyed by wet air. E254

257 Raven Guidance & Steering Viper 4 is a recipient of an AE50 award celebrating product innovations in agriculture, food, and biological systems. Raven Viper 4 Viper 4 integrates with Raven's full line of products into one networked platform that offers a responsive touchscreen and an intuitive, tablet-style interface with swiping features and horizontal or vertical orientation. Customize your Viper 4 by user and machine - it's colorblind which means it works with equipment of every brand. Easy job set-up, fewer touches, and greater efficiency allow for extraordinary data management capabilities. FEATURES: 12.1" LED touchsreen, tablet like interface Rugged magnesium alloy enclosure Interface for portrait or landscape orientation Raven Operating Software Dustproof for tough environments 4 camera inputs for monitoring 2 USB ports Call for Current Pricing SmarTrax MD is also the recipient of an AE50 award celebrating product innovations in agriculture, food, and biological systems. SmarTrax MD Raven s new, simple-to-install mechanical drive steering system harnesses the newest technologies to keep you on track and on line all day long. You ll benefit from added torque for faster operating speeds, increased accuracy and reduced noise. Transfer SmarTrax MD between multiple vehicles, including combines, tractors, windrowers and more. FEATURES: Added torque -fast operating speeds and better line acquire Simple to install and move between machines 3D terrain compensation Quiet operation Call for Current Pricing EQUIPMENT SmarTrax This unique hydraulic-assisted steering system enhances high speed operation by offering faster line acquisition, correction for changes in soil condition and implement pull. SmarTrax offers across-theboard GPS compatibility, 3D terrain compensation and automatic system calibration. FEATURES: Compatible with many steer-ready machines Multiple kits available to fit all modern tractors 3D terrain compensation Call for Current Pricing E255

258 Raven Sprayer Controls Part No W Price $3, Raven Envizio Pro II Raven's multi-function field computers enable you to control, simplify and improve virtually every phase of your operation. With a single field computer, you enjoy increased efficiency, cost savings and reduced fatigue. FEATURES: Non-glare, 6.5", color touch screen Multi-product control with VRA All season for planting, spraying, spreading, harvest and tillage Simple and advanced mapping, data and application reports Scalable GPS options, including OmniStar and RTK Multiple language support USB and Ethernet ports EQUIPMENT Part No Price $1, with Patch Antenna Part No Price $1, with Helix MBA Antenna Cruzer II This system lets you add all the benefits of an easy-to-use precision guidance system to your operation, without pushing your budget off course. Because two of the biggest obstacles were removed complexity and high cost. Cruizer II also makes it simple for you to grow with more power and capability when you re ready for auto-steering and automatic on-off planter and boom section controls FEATURES: Weather resistant versions for use in open cabs Color touch screen display Bird's eye view and downfield 3D perspective for checking coverage and keeping you on line SCS 4400 Control System The Raven SCS4400 control system provides precision automatic rate control and data logging for up to five products. It features a new VGA monochrome display and offers the flexibility of 7 boom inputs. Two separate application rates can be pre-programmed into the controller and selected on the go with the flip of a switch. Application rates can be overridden to accommodate spot spraying needs even when in automatic mode. Part# Price $1, This system is GPS compatible, and the console is extremely user-friendly featuring simple programming, and an easy to read display. E256

259 Raven Sprayer Controls SCS 440 Control System Advanced technology makes the Raven SCS440 the ultimate sprayer control.with the addition of GPS compatibility, Raven, now more than ever, is leading sprayer electronic control system technology into the future! Set your application rate and the SCS440 automatically maintains that rate throughout your entire spraying job regardless of changes in vehicle speed or terrain. The SCS440 can be programmed in volume per acre, volume per hectare or volume per thousand square feet. Part# Price $1, Raven SCS460 Liquid/NH3 Raven s SCS 460 sprayer controller provides precision product automatic rate control for up to seven boom section inputs. Two separate application rates can be preprogrammed into the controllers and selected on the go with a simple flip of a switch. The SCS 460 is compatible for variable rate application and data logging. Easy to read 28 digit display Ground speed compensated automatic rate control One time, easy programming Cumulative TOTAL VOLUME applied and TOTAL AREA worked for record keeping Digital boom pressure readout Low tank fault alarm Automatic Rate +/- PWM Valve Control Option Control valve delay EQUIPMENT Part# Price $1, The Hawkeye System is built on the ISOBUS communication platform which allows it to work with ISO Task Controllers, including the Viper 4. SIDEKICK PRO TM Raven s Sidekick Pro direct injection systems help you save time and money on applications of herbicides, insecticides, drift agents and nitrogen stabilizer. The Sidekick Pro injects chemicals directly into the in-line mixing tube to eliminate pre-mixing and costly leftovers. (Call For Details & Current Pricing) HAWKEYE NOZZLE CONTROL SYSTEM Raven s Hawkeye Nozzle Control System is ultra-precise. This pressure based product control system allows for precise sprayer application in a variety of conditions, reducing spray drift and getting the most out of every nozzle. Each nozzle is controlled by its own individual pulsing valve giving you a consistent spray pattern as speed and conditions change. (Call For Details & Current Pricing) E257

260 Raven Components Raven Flow Meters Model Part# Connection Flow Rate GPM Material Price RFM ½" FPT M200 Flange Poly $ RFM-60S ½" FPT 1-60 Stainless $ RFM-60P ½" M200 Flange 1-60 Poly $ RFM " FPT M220 Flange Poly $ RFM-200P " FPT M300 Flange Poly $ RFM " FPT Cast Iron $ Raven Cables (Note: these are the most common cables for the 440 system) EQUIPMENT Part# Description Purpose Price ft. Flow Cable NH3 Flow Cable 3 Section $ ft. Console Cable 440 Power Cable (round) $ ft. Console Cable 440 Console Cable (square) $ ft. Flow Cable 440 Flow Cable w/ Spade Connector (square) $ Radar Interface Connects a Dickey John Radar into Raven System $ ft. Flow Extension Extends Flow Cable 12ft. $ ft. Flow Extension Extends Flow Cable 24ft. $ ft. Meter Extension Extends Flow Meter Cable 6ft. $ ft. Meter Extension Extends Flow Meter Cable 12ft. $ ft. Flow Cable New style NH3 Flow Cable 1 Section $ Sec Switch Pro John Deere GS2 Compatible $ Raven Valves Model Description Purpose Price " Poly Valve Servo Valve to regulate flow $ " Steel Vale NH3 Servo valve to regulate flow $ Motor Head Head only for above Servo $ " Valve Only NH3 on-off valve $ " NH3 Complete Complete on-off valve $ Black Motor Head Valve only for on-off valve $ ¼" NH3 Vlave Complete for on-off valve $ E258

261 Raven Accuboom/Autoboom PREVIOUSLY SPRAYED ZONE NO SPRAY ZONE (Call For Details) Raven AutoBoom Spraying perfection can be achieved with Raven's automatic boom height controller - the AutoBoom. AutoBoom adjusts your booms automatically at speeds of up to 20mph, increasing your spraying speed 15-30%! Raven offers three AutoBoom systems: The PowerGlide AutoBoom: is a low cost Autoboom leveling kit with one button engageand a compact console that allows easy mechanical adjustment. The PowerGlide Plus Autoboom: is a G1 pressure based boom leveling system that utilizes the Viper Pro, Envizio Pro, Envisio Plus, SCS4X00, or Autoboom console for setup and operation. (Call For Details) Raven AccuBoom Using the Raven VIPER and GPS positioning technology, the AccuBoom feature automatically turns boom sections on and off in the field according to previously-recorded applied areas. Up to 10 Boom Control (7 for parallel) Hands off Control Reduction in overlap Simplified coverage of point rows Reduced Stress This system can be used with Cruzer II, Envizio Pro II and Viper Pro EQUIPMENT The UltraGlide Autoboom: uses the G2 Ultrasonic boom leveling system with simple one button automatic calibration. It uses either the Viper Pro, Envizio Pro, Envisio Plus, SCS4X00, or Autoboom console for setup and operation E259

262 TeeJet Matrix Matrix Guidance The Matrix is designed to tie into video cameras that capture the field view in front of the operator and project it as the background on the screen. In guidance over video mode, the screen shows the guidance information overlaid on the live field view, providing a unique view of otherwise difficult-to-monitor aspects of the application operation and the machine. The RealView cameras offered with the Matrix system feature strong night time illumination, a water- and dustproof enclosure, and adjust well to sun or shade conditions. The Matrix console is also compatible with AgCam cameras. EQUIPMENT The two Matrix models differ in screen size, cameras supported, and screen capabilities. The 540G features a 5.4 inch touch screen display and four camera ports, while the 870G features an 8.7 inch display and 8 camera ports. The 870G also offers four-camera split screen view, high resolution display, home/up/down buttons and a more substantial ram mount for added stability. Both units fully support other TeeJet modules. Call for Details & Current Pricing Tip Flow Monitor Sentry 6140 has made identifying plugged spray tips, never easier! Plugged or partially blocked spray tips can have a significant impact on the quality of your spraying job. Streaks in the field caused by misapplication can result in yield reductions, increased weed pressue and the need to re-apply-all of which can be costly. The sentry 6140 Tip Flow Monitor provides a simple, reliable solution to this age-old problem. Flow sensors mounted at each spray tip location monitor the flow through the tip and provide instantaneous feedback to the operator should a tip become clogged. By eliminating the need to dectect plugged tips visually from the cab, operators can cover more acres in a day, and know, with confidence, their spray tips are operating properly. FEATURES: Individually monitor flow performance from every spray tip on your boom Sentry 6140 utilizes a compact flow meter integrated into each nozzle body Flow meter detects flow variation caused by clogs, nozzle damage or loss, or upstream flow restrictions System can monitor up to 75 spray nozzles simultaneously Error is indicated by audible alarm, display notification and illuminated LED at the affected nozzle Call for Details & Current Pricing E260

263 Trimble Trimble TMX-2050 Take control of your entire operation with a system that gives you the clarity, certainty, and connectivity you need. Because your business is too important to leave to chance. Built on the Android operating system, the flexible platform integrates into your operation seamlessly, and the intuitive interface makes it easy for both beginner and advanced users to easily implement precision agriculture solutions. Modular architecture allows future expandability. And if you need to switch vehicles, it s literally a snap, with a quick mount and single-cable connection. You manage every section, every row, every seed on your farm. And the TMX-2050 display provides instant access to the Connected Farm dashboard a central location to view the information that impacts you, such as weather forecasts and rainfall, commodity prices, and fleet management information. The display provides real time data, so you can optimize operator performance and guarantee equipment security. Large 12.1 (30.8 cm) high-definition color touch-screen display Tablet-like interface with customizable run screen, user can move and turn widgets on/off to meet their needs Rugged construction for everyday field use, meeting demands in harsh environments One integrated GNSS receiver One integrated camera with support for an additional external camera Easy transferability between vehicles (less than five minutes) when transfer kit is used EQUIPMENT Call for Current Pricing Trimble FmX The FmX integrated display is an advanced, full featured guidance display for all your precision farming operations. This versatile display allows you to adapt as your farming business grows. Access leading-edge capabilities to enhance your productivity in any stage of the crop cycle. Wirelessly share data between vehicles or transfer information from the field to the office in real time - providing all your operators with up-to date, consistent maps and guidance lines. Large 12.1 color touchscreen display Rugged construction for everyday field use Four video camera inputs Two high-performance, integrated GPS/GNSS receivers Call for Current Pricing E261

264 Trimble Field IQ Field-IQ Crop Input Control System Introducing new and expanded variable rate and boom control options for the Field-IQ crop input control system. Manage pest and nutrient applications by avoiding spray overlap with automatic or manual control of up to 48 sections more sections controlled than any other variable rate system in the industry today. Seeding Spraying Strip Tilling/NH3 EQUIPMENT Optimize the planter and create a high yielding environment with Field-IQ Seed Monitoring Prevent costly seeding errors by tracking seed meter performance Provide singulation details from the seeding system that allows for onthe-go planter tuning and increase the quality of seed placement Prevent Seed Overlap with Field-IQ Section Control and Tru Count Clutches Control up to 48 rows individually for maximum control Vary Seed Population in Your Field with Field-IQ Variable Rate Control New! Simultaneously control application rate of up to six different materials including seed, granular seed and fertilizer, liquid and anhydrous ammonia Connect to Rawson drives for increased accuracy and speed of response Manually adjust your seed population rate or use a prescription map from Farm Works office software Apply a high population to fertile soils to maximize yield potential while reducing the rate on less fertile soil Prevent Spray Overlap with Field-IQ Section Control Control up to 48 sections or nozzles and shut off sections in waterways and point rows to avoid overspraying Use with existing boom shutoff valves and Tru Count LiquiBlock valves from Trimble Connect directly into the vehicle boom shutoff valves so no additional hardware is required Manage Rate and Section Control with Field-IQ Variable Rate Control Vary rates manually or using prescriptions to save money and increase yields while keeping records of what was applied Integrated control with servo and PWM valves Flexibility to work with many different plumbing designs and hardware configurations Simple setup makes it easy to calibrate and have accurate application Control up to 48 Sections for NH3 Anhydrous and Strip Till Avoid overlap in waterways and point rows using automated section control for up to 48 sections in liquid and strip till toolbars Control material applications more conveniently by connecting to existing valves and flow meters already on the toolbar Spreading Control up to 48 Sections for NH3 Anhydrous and Strip Till Avoid overlap in waterways and point rows using automated section control for up to 48 sections in liquid and strip till toolbars Control material applications more conveniently by connecting to existing valves and flow meters already on the toolbar Compatibile With These Trimble Dispays CFX-750 FmX Display E262

265 Trimble EZ-Guide 250 & CFX-750 EZ-Guide 250 With common-sense interface and a color screen, the AgGPS EZ-Guide 250 is easy to operate right out of the box. Plus, you can upgrade to the EZ-Steer 500 assisted steering system, delivering a total package priced far less than the competition. 15 bright guidance LED s give you quick on-line visual feedback to keep you on track. The 4.3" color screen allows to you see at a glance where you are, where you ve been and what you have been doing. Transfer your day s coverage maps to your computer using a USB flash drive and easily print out coverage reports. 3D and 2D swath graphics, Radar speed output, easy to install RAM mount and OnPath filter technology. Large 4.3" widescreen color LCD with 15 bright guidance LCDs Built-in GPS receiver provides submeter DGPS accuracy. Low-profile patch antenna included, or upgrade to 6" 8" pass-to-pass accuracy with optional AG15 antenna. Optimized guidance accuracy with OnPath filter technology for use in any part of the world. FreeForm guidance pattern, the ultimate in guidance flexibility, allows you to work in different patterns and shapes that best fit the layout and contours of your field. Just drive; FreeForm will automatically detect the nearest driven swath and guide you right beside it. Part# Description Price Lightbar Kit $1, Upgrade Antenna Kit $ EQUIPMENT CFX-750 The Trimble CFX-750 display is the newest touchscreen display from Trimble offering affordable guidance, steering and precision agriculture functionality. Use the CFX-750 display to maximize your efficiency when planting, spraying, spreading and strip tilling by adding Trimble's Field-IQ crop input control system, and upgrading to receive GLONASS satellites. 31 bright guidance LEDS give you quick on-line visual feedback in any light conditions. Easy to use 8" color touchscreen for simple navigation from screen to screen. Large color display eliminates squinting. With this bold screen you can tell at a glance where you are, where you ve been and what you are doing. The USB Connection allows simple operation of main guidance functions selections. View up to two live video images on screen and monitor parts of your implement that are not visible from the cab Choose from multiple guidance patterns, and between plan and 3D perspective views, to see where you are and what you have been doing $3, The CFX 750 system represents revolutionary innovation in lightbar guidance systems. Because it has a built-in dual frequency receiver, you get to choose the accuracy you need from 6"-8" up to 1" pass-to-pass, year to year without adding another GPS receiver to your cab. When you need a GPS guidance system that saves you time, fuel and inputs, look no further than the CFX 750 system-the cornerstone of lightbar guidance, hands free farming, and boom section control from Trimble. E263

266 Trimble EZ Pilot & EZ-Steer EZ-Steer Simple, portable hands-free farming for over 600 vehicle models-old and new! The EZ-Steer system turns the steering wheel for you by combining a friction wheel and a motor with GPS guidance from the CFX 750 or the EZ- Guide 250 lightbars. While the E-Z Steer keeps you on line, you can focus on many different tasks, such as spray or planter performance, improving job quality and crop yields while reducing fatigue. EZ Steer for EZ Guide 250/500 $2, EZ Steer for CFX 750 $2, EQUIPMENT The EZ-Steer Motor receives electrical signals from the EZ-Steer Controller and converts them to precise commands that the vehicle s steering system uses to keep the vehicle on path. The handy foot switch allows you to engage and disengage the EZ Steer System with the optional foot switch for hands free farming. Using data from the GPS receiver the EZ-Steer Controller sends precise instructions to the steering wheel motor. T2 technology continually corrects for roll and yaw by using state of the art 4-axis solid state inertial sensors to give you a true on-ground position. EZ-Pilot The Trimble EZ-Pilot assisted steering system is a high-accuracy system that turns the steering wheel with its integrated electric motor drive using Global Navigation Satellite System (GNSS) guidance from the CFX-750 display or the FmX integrated display. High accuracy at an affordable price. It features a sleek design with the motor integrated into the steering column, providing clear access to the instrument panels and controls in the cab. The flexibility of the system also allows for unrestricted manual steering when the system is not in use. T3 ENHANCED TERRAIN COMPENSATION TECHNOLOGY Immediately adjusts vehicle steering to compensate for rough terrain or slopes and hillsides FAST-REACTING MOTOR Allows system to quickly get the vehicle online and stay there HIGHER TORQUE Better steering of vehicles with more rigid power steering systems, such as floaters. SLEEK, CLEAN DESIGN Motor integrated into the steering column provides clear access to all instrument panels and no decrease in leg room in cab. GREATER FLEXIBILITY Electric steering motor allows for unrestricted manual steering when assisted steering is not engaged. COMPATIBLE STEERING OPTIONS Steering system installation preserves the use of the vehicle's original steering wheel and telescopic functionality. CALL FOR PRICING E264

267 Calc-An-Acre & Sensor 1 CALC-AN-ACRE Calc-an-acre is a state of the art acre counter that accurately calibrates and displays acreage with the touch of a button. It incorporates a dual counting system that makes it possible to reset and record individual fields while maintaining a running total of area worked. Calc-an-acre is also a digital speedometer that provides true ground speed. Set and maintain correct ground speed Know the exact acres covered when leasing equipment Measure and monitor test plots Perform yield checks during the harvest season Keep an accurate acre count when performing custom work Maximize tractor performance by monitoring slippage Verify chemical and fertilizer application rates Part# SKU Price MT $ Sky Trak Receiver The Sky Trak velocity sensor brings the accuracy and ease of installation of a GPS receiver to equipment designed for a radar or speed wheel sensor. Completely self contained ( GPS Receiver, antenna and velocity to pulses convertor) 16 channel GPS Receiver Surface, bracket, pipe or magnetic mount Seven HZ update rate Part# SKU Description Price SK2-1009R Raven Pin $ SK2-1009D Dickey John $ EQUIPMENT Sensor 1 This sensor is ideal for use with farming electronic applications that require a small, highly accurate GPS receiver. 2.4in diameter Magnetic base Can replace old radars Customize your sensor with connectors for Raven, Tee-Jet and many other brands of monitors DS-GPSM-D1 Universal Receiver $ DS-GPSM-R1 Speed Sensor: 1hz $ DS-GPSM-R5 Speed Sensor: 5hz $ E265

268 Vision Works Ag Cameras Vision Works Ag Cameras are not only affordable, but also durable systems that allow you to monitor your blind spots, grain bins, implements, equipment, livestock, or anything else that may need your attention. For when you just can't be in two places at once. Kits are available for Trimble, Raven and TeeJet Displays. FEATURES: Night vision Designed for your needs Easy installation Accessories available Weather proof Systems starting at $134 VWIC500 5" monitor Upgraded 600 TVL VWCAM4/magnet 30ft. cable VWIC700 7" monitor Upgraded 600 TVL VWCAM4/magnet 30ft. cable Remote Two inputs EQUIPMENT Monitor Your Fuel Tanks to Prevent Theft Perfect for Dark Or Low Lit Areas. SCS 440 Components Console PSCS440 3 boom Console including Serial Interface Component Cables 10ft Console Cable (A) ft Console Cable (B) ft Flow Extension Cable ft Flow Extension Cable ft Flow Control Cable (A) ft Flow Control Cable (B) ft Flow Control Extension Cable (A) ft Flow Control Extension Cable (B) ft Flow Control Extension Cable (A) ft Three Boom Extension Cable (B) ft Speed Extension Cable ft Speed Extension Cable A Old Style Cable B New Style (Compatible with Raven (3) Boom Valves Radar Speed Sensor Interface Cables John Deere to Raven Radar John Deere to Dickey John Radar Flow Meters RFM15 (.3-15gpm poly) M200 flanged RFM60P (1-60gpm poly) M200 Flanged RFM100 (5-100gpm poly) M200 Flanged RFM200P (15-200gpm poly) M300 Flanged RFM60S (1-60gpm SS) for NH Control Valves 1 Poly Control Valve-Flanged /2 Poly Control Valve Carbon Steel Control Valve for NH Motor only for 1 NH3 Control Valve On/Off Valve 1 NH3 On/Off Valve Motor only for On/Off Valve Boom Valve single manifold Boom Valve three section manifold E266

269 Formula/Conversion Suggested Minimum Spray Heights Flat Fan Spray Tips Spray Angle 15" Spacing 20" Spacing 30" Spacing 40" Spacing** 80 (TR) 13"-14" 17"-19" 26"-28" NR* 110 (TR) 10"-11" 15"-18" 20"-22" NR* 120 (ULD) 8"-10" 12"-15" 16"-20" 24"-30" * Not Recommended ** This nozzle spacing is prone to off-target trespass, under certain conditions that affect drift. Optimum Spray Heights Flat Fan Spray Tips Spray Angle 15" Spacing 20" Spacing 30" Spacing 40" Spacing** 80 (TR) 22" 30" 43" NR* 110 (TR) 15" 20" 30" NR* 120 (ULD) 15" 20" 30" 40" * Not Recommended ** This nozzle spacing is prone to off-target trespass, under certain conditions that affect drift. EQUIPMENT Nozzle Spacing To calculate a conversion factor for spacing not listed below, use the following formula: Conversion Factor = Nozzle Spacing in table (inches) Your Nozzle Spacing (inches) 20 inch Nozzle Spacing Other Spacing Conversion Factor inch Nozzle Spacing Other Spacing Conversion Factor E267

270 Spraying Formulas Formulas and Conversion Factors GPM = (Per Nozzle) GPM = (Per Nozzle) GPA = GPA x MPH x W 5,940 GAL/1000FT 2 x MPH x W 136 5,940 x GPM (Per Nozzle) MPH x W GAL/1000FT 2 = 136 x GPM (Per Nozzle) MPH x W GPM Gallons Per Minute GPA Gallons Per Acre GAL/1000FT 2 MPH Miles Per Hour Gallons Per 1000 Square Feet W Nozzle spacing (in inches) for broadcast spraying Spray width (in inches) for single nozzle, band spraying or boomless spraying Row spacing (in inches) divided by the number of nozzles per row for directed spraying EQUIPMENT Spraying Solutions Other Than Water New Method Since most of the tabulations in manufacturers catalogs are based on spraying water, which weighs 8.34 lbs. per USA gallon, conversion factors must be used when spraying solutions which are heavier or lighter than water. To detervmine the proper size nozzle for the solution to be sprayed, first multiply the desired GPM or GPA of solution by the water rate conversion factor. Then use the new converted GPM or GPA rate to select the proper size nozzle. Example: Desired application rate is 20 GPA of 28%N. Determine the correct nozzle size as follows: GPA (solution) x Conversion factor = GPA (from table) 20 GPA (28%) x 1.13 = 22.6 PGA (water) The applicator should choose a nozzle size that will supply 22.6 GPA of water at the desired pressure. Weight of Solution Specific Gravity Conversion Factor 7 lbs per Gallon lbs per Gallon lbs per Gallon - Water lbs per Gallon lbs per Gallon lbs per Gallon - 28% Nitrogen lbs per Gallon lbs per Gallon lbs per Gallon E268

271 P.O. Box 13237, Wichita, Kansas Phone: Please FILL OUT, SIGN, and then FAX this form to I understand that the information provided on this form is not an application for credit, but is provided to keep address, phone, and sales tax information on file with Fairbank Equipment, Inc. In addition, it will allow Fairbank Equipment, Inc. to keep purchase history on file for future reference. All merchandise must be paid for at time of purchase. FARM NAME: UPS/DELIVERY ADDRESS: MAILING ADDRESS: CITY: STATE: ZIP CODE: PHONE#: CELL: FAX: EQUIPMENT PRINCIPAL OWNER(S): Agricultural Exemption Certificate- Not Applicable in Nebraska The undersigned purchaser certifies that the sale to him/her of tangible personal property or service by Fairbank Equipment, Inc. is exempt for sales and compensating use taxes in the state of: KS SD CO MO TX OK/SMX#:, Other: because the property purchased is one of the following: 1. Farm or agriculture machinery or equipment. 2. Farm or agriculture repair or replacement parts. 3. Labor services on farm or agriculture machinery or equipment. *Items 1, 2, & 3 must be used exclusively in farming, ranching, or agriculture. Description of tangible personal property or services provided: The undersigned understands and agrees that if the tangible personal property or services are used in a method other than which is stated above, or for any other purpose that is not exempt from sales or compensating use tax, the undersigned purchaser becomes liable for the tax debt. Date: Purchaser: Signature: E269

272 Please provide Fax number or for all credit references BUSINESS CONTACT INFORMATION CREDIT APPLICATION Company Name: Company Address: City: State: ZIP Code: Phone: Fax: Type of Business: Type of Merchandise to be Purchased: Principal Owner(s): Sole Proprietorship: Partnership: Corporation: Other: BILLING INFORMATION: Preferred Delivery Method for Invoices and Monthly Statements (Required) q q Fax: CREDIT REFERENCE INFORMATION Bank: Address: City: State: ZIP Code: Phone: Fax: Bank Officer: BUSINESS/TRADE REFERENCES WHERE CREDIT IS EXTENDED-Please provide Fax number Company Name: Address: City: State: ZIP Code: Phone: Fax: Company Name: Address: City: State: ZIP Code: Phone: Fax: Company Name: Address: City: State: ZIP Code: Phone: Fax: AGREEMENT 1. It is understood that the terms of payment are 15 days and that accounts overdue at the end of 15 days are subject to C.O.D. status and you agree to abide by them. 2. By submitting this application, you authorize Fairbank Equipment, Inc. to make inquiries into the banking and business/trade references that you have supplied. It is understood that the information given on this application will be held in strict confidence and used only for the purpose intended. 3. If credit availability is granted by Fairbank Equipment, Inc., all decisions with respect to extension, continuation, and termination shall be in the sole discretion of Fairbank Equipment, Inc. 4, I HEREBY CERTIFY THAT THESE STATEMENTS ARE CORRECT TO THE BEST OF MY KNOWLEDGE AND ARE MADE FOR THE PURPOSE OF OBTAINING FINANCING FROM FAIRBANK EQUIPMENT, INC. SIGNATURES x x Title: Date: Title: Date: 3700 W. Jewell St. Wichita, Kansas Phone: Fax: ar@fairbankequipment.com

273 ORDER TOLL-FREE For Convenient Same Day Shipment * Use this order form and our Toll-Free fax number for fast, Hassle-Free service and receive $2.00 off your total bill! Your Shipping Information: Company Name Street City State Zip Attention Signature Date P.O.# Your Billing information Company Name Street City State Zip Phone# ( ) Fax# ( ) Quantity Part Number Description Shipping Preference: Customer Pickup Federal Express U.P.S Freight *Same day shipping applies to orders received before 4:00 p.m. Wichita, KS Toll Free Fax Yankton, SD Toll Free Fax Grand Island, NE Toll Free Fax Garden City, KS Fax Evans, CO Fax Brush, CO Fax On-line order form available at:

274 Outside Sales Team Kelly Stucky North Central Kansas Phone: Mike Quackenbush Central & Western Nebraska, Northern Colorado Phone: Brian Rosenhagen Central & Southeast Kansas Phone: Tom Tucker Western Kansas & Southern Colorado Phone: EQUIPMENT Darrin Cox Western Kansas Phone: Scott Feller South Dakota Phone: Tim Moritz Northeast Kansas Phone: Aaron Hartman GPS Systems Specialist Phone: Mike Nix Oklahoma & Texas Panhandle Phone: Cole Pensick Nebraska Duo-Lift Specialist & Eastern Nebraska Phone: Scott Cooper Missouri Phone: E272

275 EQUIPMENT C

276 EQUIPMENT D