Congratulations! Enjoy your Kyra by Girsberger!

Transcription

1 Kyra

2

3 Congratulations! You have chosen an exceptional chair, one which combines highest functional quality with simplest operating means. In order to make the most of your Kyra, read our advice for easy use on the following pages. Enjoy your Kyra by Girsberger!

4 35 This is how to adjust Kyra to the anatomy of your body by using the synchronous mechanism. Seat height Use the lever under the front of the seat on the right (when seated) to infinitely adjust the height of the seat. Draw the lever up, then let it go as soon as the seat reaches the right height. Seat depth By pressing the oblong button on the right side of the seat, you can slide the seat forward or backward.

5 Synchronized dynamic sitting The lever under the front of the seat on the left allows you to choose between synchronous movement of the chair with the body and a fixed chosen position of seat and backrest. 1. Lever in horizontal position If you lean back, the seat and backrest follow your movements synchronously. 2. Lever in upper position The seat and backrest are locked into position. Angle of seat tilt Kyra is also available with an optional engageable seat tilt of -3. This can be engaged using the lever under the front of the seat on the left. 1. Lever in horizontal position If you lean back, the seat and backrest follow your movements synchronously up to a seat tilt of Lever in upper position The seat and backrest are locked into position. 3. Lever in lower position If you lean back, the seat and backrest follow your movements synchronously up to a seat tilt of -3. To return to the original position of 0, lean back and move the lever on the front left of the seat into a horizontal position.

6 37 Weight adjustment The handwheel next to the lever under the front of the seat on the right allows you to adapt the chair s tension and, as a result, the pressure of the backrest to the weight of your body. Turn the wheel forward and the tension will be increased; turn it backward and the tension will be reduced. Height adjustment of the backrest By pressing the button at the bottom right-hand side of the backrest, you can individually adjust the backrest height.

7 T-shaped armrest Ring-shaped armrest Adjustability of the 4-D armrests Lumbar support As an option, Kyra is also available with an adjustable lumbar support. The depth of the support is adjusted by turning the integrated handwheel on the backrest. Turning it to the right increases the supportive strength, turning it to the left reduces the strength. Armrests Kyra is available either with or without 2-, 3- or 4-dimensional armrests. The armrest height is adjusted with the help of a push-button on the outer side of the armrest. The space between both armrests can be adjusted. It is also possible to equip the chair with armrests at a later date. Armrest caps which can be pushed forward and backward (3-dimensional) and adjusted in angle (4-dimensional) are optionally available. Ring-shaped armrests As an alternative, Kyra can be equipped with ring-shaped armrests which are adjustable in width and height.

8 39 Your ideal sitting position. Your seat height is correct when your legs form an angle of 90 at the knees (thighs and feet horizontal). Important: Be sure that you feel no pressure on your thighs (restricted blood circulation!). Your work surface is at the right height if your arms form an angle of approximately 90 at the elbows and your lower arms are almost horizontal to the desk top. Proper care of Kyra All mechanical and movable parts of Kyra, as well as all dyed-through plastic parts, require no maintenance. The cushions can be cleaned with a brush and a normal fabric cleaning agent. Napa leather: Clean occasionally with well-diluted soapy water. Wipe off with clean water. Allow to dry, then polish with a woollen cloth. Do not use a cleaning agent or polish. If the chair is on a carpet, you should periodically remove the carpet fluff which can collect around the castors.

9 Animated operating instructions Animated operating instructions see A word on safety The construction of Kyra is based on international safety standards and requirements, as well as on years of Girsberger expertise in office seating. All plastic parts of Kyra are of robust material and resistant to impact, scratches and chipping. Kyra was designed as an office seat for one person. If the chair is put to any other use, Girsberger will not accept liability. Children should not be allowed to play in the vicinity of Kyra. The pneumatic spring unit should not be exposed to heat or opened forcefully. Work on or replacement of the pneumatic springs may only be done by trained specialists. The standard model comes with castors for carpet floors. Soft castors for hard floors can be recognized by the coloured ring on the outside rim. Tested according to EN 1335

10 Girsberger Werke mit Ausstellungszentren Usines Girsberger avec centre d exposition Stabilimento Girsberger con centri espositivi Schweiz, CH-4922 Bützberg Tel. +41(0) Deutschland, D Endingen Tel. +49(0) Türkei, Istanbul Tel. +90(0) Fábricas Girsberger con sala de exposición Girsberger plants with showrooms Girsberger meubelfabrieken met schowrooms Girsberger Niederlassungen mit Ausstellungszentren Filiales Girsberger avec centre d exposition Filiali Girsberger con centri espositivi Sucursales Girsberger con sala de exposición Girsberger subsidiaries with showrooms Deutschland, D Hamburg Tel. +49(0) Frankreich, F Paris Tel. +33(0) Benelux, NL-1101 CM Amsterdam-Z.O. Tel. +31(0) Türkei, Cayyolu, Ankara Tel. +90(0) Türkei, Altunizade-Istanbul Tel. +90(0) Girsberger vertegenwoordigingen met schowrooms Nr /16