Type: BEGA Product: Project: Voltage: Color: Options: Modified:

Transcription

1 Recessed wall luminaires with directed light Housing: Constructed of diecast and aluminum with integral wiring compartment. Mounting tabs provided. Die castings are marine grade, copper free ( 0.3% copper content) A360.0 aluminum alloy. Enclosure: One piece diecast aluminum faceplate. Clear tempered glass;.125" thick, machined flush to faceplate surface. Faceplate is secured by two (2) flush, socket head, stainless steel captive screws threaded into stainless steel inserts in the housing casting. Continuous high temperature, molded silicone rubber gasket for weather tight operation. Electrical: 11.2 W LED luminaire, 14.5 total system watts, 30 C start temperature. Integral 120 V277 V electronic LED driver, 0 10 V.The LED and driver are mounted on a removable plate for easy replacement. Standard LED color temperature is 3000K (available in 4000K; add suffix K4). 3500k color temperature available, consult factory. Note: Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGAUS. For the most current technical data, please refer to Options: Optionally available with amber LEDs, not available with this option. Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order. UL listed for US and Canadian Standards, suitable for wet locations and for installation within 3 feet of ground. IC rated. Protection class: IP65. Type: BEGA Product: Project: Voltage: Color: Options: Modified: Luminaire Lumens: 342 Tested in accordance with LM7908 B A C Lamp A B C W LED BEGAUS 1000 BEGA Way, Carpinteria, CA (805) FAX (805) com copyright BEGAUS 2016 Updated 02/16

2 UPDATED 8/ ADA L ED wedge downlight wet location Optional print this page this page to a colleague installation instructions interactive submittal drawing COMPANION Shown in Natural Bronze. ECO INFO METALS: Hood is made from bronze with 90% recycled content or for painted finishes, aluminum with 3040% recycled content. Backplate is made from 100% recycled aluminum. All metals are valuable and recyclable at the end of the product s useful life. For more information see GENERAL INFO. FINISHING: Solid, natural metal finishes are hand satined. No paint or lacquer is used on the hood in order to avoid pollution associated with the manufacture and application of these substances. Paint finishes are low VOC and oven cured. ENERGY: Designed for compact fluorescent lamps using electronic ballasts or LEDs. MATERIALS Solid bronze or stainless steel hood. Aluminum is used for painted finishes. Cast aluminum backplate is painted to match hood finish. High transmission clear refractive acrylic lens. Aluminum hexcel louver. FINISHES NBZ Natural Bronze SSS Satin Stainless Steel SGB SemiGloss Black SGW SemiGloss White SGBZ SemiGloss Bronze LAMPING FEATURES ADA version of the wedge family. Solid bronze or stainless steel construction ensures long life. Cutoff design combined with low glare. Available with CF or LED lamping. CAA Clear Anodized Aluminum CCP Custom Color Painted finish SGS SemiGloss Silver Learn more about Natural Bronze click here 1CF13TTT,2Gx7 base. Lamp not included. LED: 19W array, 1210 lumens, 3000K & 80CRI. LED array is included in a holder and is replaceable. BALLAST/DRIVER CF: Integral electronic HPF, 120V/277V. LED: Integral HPF electronic, 120V only. Available with 12V driver. Dimming & 277V available. 999 Montague St San Leandro, CA ph fax

3 718 Shown in Clear Anodized Aluminum. OPTIONS LENS: High transmission clear refractive acrylic is standard. For optional hexcel louver, specify HXL. NOTE: The optional hexcel open cell louver offers lower glare with higher output directly below the fixture, but less light to the sides and front. PHOTOMETRICS See LSI Report No. 27,864 for model 718LED. Note: Test was done with an LED rated at 420 lm. new LED is rated at 1210 lm or 188% more. Adjust light levels accordingly. EMERGENCY BATTERY PACK: Remote mounted EBP, specify REM. Not available for LED. NOTE: This fixture is suitable for wet or dry locations. For wet locations use only as a downlight. MOUNTING: Standard Jbox or plaster ring. WEIGHT: 4 lbs VARIATIONS / MODIFICATIONS Special finishes Special sizes NOTE: This fixture is available for 277 volt, and for 12VAC. Call factory. SPEC GUIDE CAT# LAMPING VOLT FINISH q 718 q CF1/13 q LED 1/9 SAMPLE SPEC: 718LED/10120NBZ q 120 q 120/277 DIM q NBZ q SSS q SGB q SGW q SGBZ q CCP q CAA q SGS OPTION q HXL q REM Learn more about Natural Bronze click here IBEW Labelled Our fixtures are handcrafted here in the USA using the highest quality materials. 999 Montague St San Leandro, CA ph fax

4 LED Bollard Fully shielded Post construction: One piece extruded aluminum with internally welded diecast aluminum base. Die castingas are marine grade, copper free ( 0.3% copper content) A360.0 aluminum alloy. Enclosure: One piece diecast aluminum top housing, secured by two captive stainless steel screws threaded into stainless steel inserts. Clear tempered safety glass. Reflector made of pure anodized aluminum. Fully gasketed using a molded silicone high temperature gasket for weather tight operation. Electrical: 18.9W LED luminaire, 22.4 total system watts, 30 C start temperature. Integral 120V through 277V electronic LED driver, 010V. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with an 85 CRI. Available in 4000K (85 CRI); add suffix K4 to order. Type: BEGA Product: Project: Voltage: Color: Options: Modified: Note: LEDs supplied with luminaire. Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGAUS. For the most current technical data, please refer to Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order. Anchor base: Heavy cast aluminum, slotted for precise alignment. Mounts to BEGA anchorage kit. Bollards are secured to the base with one (1) stainless steel set screw. CSA certified to U.S. and Canadian standards, suitable for wet locations. Protection class IP65 Weight: 10.8 lbs. Luminaire Lumens: 1508 A A B Lamp A B 18.9 W LED BEGA US 1000 BEGA Way, Carpinteria, CA ( 805 ) FAX ( 805 ) www. begaus. com copyright BEGAUS 2016 Updated 05/16

5 LED Bollard Fully shielded Post construction: One piece extruded aluminum with internally welded diecast aluminum base. Die castingas are marine grade, copper free ( 0.3% copper content) A360.0 aluminum alloy. Enclosure: One piece diecast aluminum top housing, secured by two captive stainless steel screws threaded into stainless steel inserts. Clear tempered safety glass. Reflector made of pure anodized aluminum. Fully gasketed using a molded silicone high temperature gasket for weather tight operation. Electrical: 18.9W LED luminaire, 22.4 total system watts, 30 C start temperature. Integral 120V through 277V electronic LED driver, 010V. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with an 85 CRI. Available in 4000K (85 CRI); add suffix K4 to order. Type: BEGA Product: Project: Voltage: Color: Options: Modified: Note: LEDs supplied with luminaire. Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGAUS. For the most current technical data, please refer to Options: Optional asymmetrical wide beam distribution available for optimal bollard spacing specify AWD. Optional integral emergency battery pack available specify EMPK. Battery will operate the fixture at full 100% output for 90 minutes. Ambient temperature must not go below 20 C and must not exceed 50 C. Options can be specified individually or concurrently. Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order. Anchor base: Heavy cast aluminum, slotted for precise alignment. Mounts to BEGA anchorage kit. Bollards are secured to the base with one (1) stainless steel set screw. CSA certified to U.S. and Canadian standards, suitable for wet locations. Protection class IP65 Weight: 14.6 lbs. Luminaire Lumens: 1508 A A B Lamp A B 18.9 W LED BEGA US 1000 BEGA Way, Carpinteria, CA ( 805 ) FAX ( 805 ) www. begaus. com copyright BEGAUS 2016 Updated 05/16

6 Urban Project: Location: Cat.No: Contemporary Lantern L80 L81 L82 Type: Lamps: Notes: Qty: Philips Lumec s Contemporary Lantern Series brings the lantern style of design into the 21 st century. This series combines elegance and performance with sheer brilliance. Without question, the Contemporary Lantern Series offers a discerning quality that adds a timeless finishing touch to the most beautiful installations. Ordering guide: Luminaire Example: L8035W32LED4KTPCCSLE5120DMGSFOOVRBKTX Series Lamp Lamp type T Globe material PC Globe finish CS Optical system Ballast Driver options Adapter Luminaire options Finish L80 L81 L82 30W16LED4K 2 35W32LED4K 2 48W16LED4K 2 55W32LED4K 2 70W64LED4K 72W32LED4K 80W48LED4K T PC CS 2 LE2 LE3 LE4 LE AST 2 CDMG 2 CLO 2 DALI 2 DMG OTL 2 SF2 SF3 SF70 SF71 SF72 SF73 SF80 SFO SFS BO 1 FN1 FN2 FN3 FN5 FN6 FN7 FN8 FN9 FN10 HS 3 OVR PH7 BE2TX BE6TX BE8TX BG2TX BKTX BRTX GN4TX GN6TX GN8TX GNTX GR GY3TX NP RD2TX RD4TX TG TS WHTX 1. BO is only available with L V not available. 3. HS not available with LE5. Ordering guide: Motion Response* Must be ordered as a separate line item Example: ACC120MR4PGIBKTX Accessory ACC Voltage Motion Response module Finish volt volt MR4PG1 Single grey MR4PG2 Double grey MR4PW1 Single white MR4PW2 Double white Consult Philips Lumec s Color Chart for complete specifications. *OVR option is required for Motion Response Accessory Contemporary_Lantern_LED 06/15 page 1 of 5

7 FG FG L80 / L81 / L82 Contemporary Lantern Urban luminaire Features 1. Constructed from topquality materials, the Contemporary Lantern Series maintains excellent performance in even the most demanding environments. 2. Type LE2, LE3, LE4 and LE5 optic distributions are available to meet a range of lighting applications. 3. Polycarbonate globe has satinfinish to gently obscure the source without compromising photometry. 4. Tool free access to lamp and electrical components for ease of maintenance. 5. Unique styling merges traditional and contemporary design. Luminaire 18 1/2 (470 mm) 18 1/2 (470 mm) 18 1/2 (470 mm) 24 (610 mm) L.C. FG Tenon insertion 4 (102 mm) 33 (838 mm) 21 (533 mm) L.C. FG Tenon insertion 4 (102 mm) 33 (838 mm) 21 (533 mm) L.C. Tenon insertion 4 (102 mm) 33 (838 mm) 4 1/8 (105 mm) I.D. 4 1/8 (105 mm) I.D. 4 1/8 (105 mm) I.D. L80LE5SF80 EPA: 1.32 sq. ft. Weight: 45 lbs (20.4 kg) L81LE3SF80 EPA: 1.32 sq. ft. Weight: 44 lbs (20.0 kg) L82LE2SF80 EPA: 1.32 sq. ft. Weight: 45 lbs (20.4 kg) Specifications: Hood A die cast A360.1 aluminum dome, mechanically assembled on the luminaire. Globe (PC) Made of one piece seamless injectedmolded satin clear polycarbonate. The globe is assembled on the access mechanism. CS: Satin clear polycarbonate. Fitter Made of cast aluminum 356 c/w 4 set screws 3/8 16 UNC. Fits on a 4"(102mm) outside diameter by 4"(102mm) long tenon. Light engine Light engine composed of 3 main components: LED / Optical System / Driver Electrical components are RoHS compliant. LED module LED type Philips Lumileds LUXEON T. Composed of high performance white LEDs. Color temperature of 4000 Kelvin nominal, 70 CRI. Operating lifespan based on TM 21 extrapolation to get results after which 50% of LEDs still emits over 70% (L 70 ) of its original lumen output. Use of metal core board ensures greater heat transfer and longer lifespan of the light engine. The LED circuit board is included with a quick disconnect wiring connection for ease of replacement. Optical system LE2 (type II asymmetrical), LE3 (type III asymmetrical), LE4 (type IV asymmetrical) or LE5 (type V symmetrical) light distributions. Composed of highperformance optical grade PMMA acrylic refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. Optical system is rated IP66. Performance shall be tested per LM63, LM79 and TM15 (IESNA) certifying its photometric performance. Street side indicated. Driver Driver comes with compatible 010 volts. High power factor of 95%. Electronic driver, operating range 50/60 Hz. 120 to 277 or 347 to 480: Autoadjusting universal voltage input from 120 to 277 or 347 to 480 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. Maximum ambient operating temperature from 40 F (40 C) to 130 F (55 C) degrees. Certified in compliance to UL1310 culus requirement. Dry and damp location. Assembled on a unitized removable tray with Tyco quick disconnect plug resisting to 221F(105C) degrees. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.5kV (min). Contemporary_Lantern_LED 06/15 page 2 of 5

8 L80 / L81 / L82 Contemporary Lantern Urban luminaire Specifications (continued): Surge protector Surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C Scenario I Category C High Exposure 10kV/10kA waveforms for Line Ground, Line Neutral and Neutral Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid State Street Lighting Consortium) model specification for LED Urban luminaires electrical immunity requirements for High Test Level 10kV / 10kA. Luminaire accessories Motion Response: Tenon mount motion response provides 270º coverage on an adjustable knuckle. The coverage equals to up to 6 times the sensor height. It is an option offered jointly with the Dynadimmer OVR option, that can bring the light up to 100% when the motion response is triggered. It is available in a single or double mounting option. Finish options for the motion response device are white or dark gray. Finish options for the tenon must be specified to match the luminaire and pole. The tenon mount is fully rotatable 360. This option is available for a 4 OD x 4 long tenon. See instruction sheet for time setting functionality (12 second to 16 minute turn off options) and for mounting instructions. Driver options AST: Preset driver for progressive startup of the LED module(s) to optimize energy management and enhance visual comfort at startup. CLO: Preset driver to manage the lumen depreciation by adjusting the power given to the LEDs offering the same lighting intensity during the entire lifespan of the LED module. DALI: Preset driver compatible with the DALI control system. OTL: Preset driver to signal end of life of the LED module(s) for better fixture management. CDMG: Dynadimmer standard functionalities including preprogrammed scenarios to suit many applications and needs from safety to maximum energy savings. Ordering Code Scenario Dimming Time Dimming Level CDMGS25 Safety 4 hours 25% power CDMGS50 Safety 4 hours 50% power CDMGS75 Safety 4 hours 75% power CDMGM25 Median 6 hours 25% power CDMGM50 Median 6 hours 50% power CDMGM75 Median 6 hours 75% power CDMGE25 Economy 8 hours 25% power CDMGE50 Economy 8 hours 50% power CDMGE75 Economy 8 hours 75% power Contemporary_Lantern_LED 06/15 page 3 of /2" (292mm) 4" (102mm) 4" (102mm) MR4PG1 or MR4PW1 Luminaire options HS: House side shield OVR: Dynadimmer override function PH7: Photoelectric cell BO: Bridge and overpass FN: Decorative finial (see below) FN1 FN2 FN3 FN5 FN6 FN8 FN9 FN10 FN8 FN9 FN10 FN11 Select color finish Select color finish Motion Response Motion color dark Response Grey or color White dark Grey or White FN7 Finish MR4PG2 or MR4PW2 The Thermosetting powder coating provided meets the color requirements of the AAMA 2604 specification as measured per ASTM D2244. The Thermosetting product is applied at a dry film of 2.5 to 4.0 mils (64102 microns) on textured finishes, resulting in a durable long lasting finish. Finish Options Include: BE2TX: Textured Midnight Blue BE6TX: Textured Ocean Blue BE8TX: Textured Royal Blue BG2TX: Textured Sandstone BKTX: Textured Black BRTX: Textured Bronze GN4TX: Textured Blue Green GN6TX: Textured Forest Green GN8TX: Textured Dark Forest Green GNTX: Textured Green GR: Gray Sandtex GY3TX: Textured Medium Grey NP: Natural Aluminum RD2TX: Textured Burgundy RD4TX: Textured Scarlet TG: Hammertone Gold TS: Hammertone Silver WHTX: Textured White

9 L80 / L81 / L82 Contemporary Lantern Urban luminaire Specifications (continued): Wiring Gauge ( # 14) TEW/AWM 1015 or 1230 wires, 6" (152mm) minimum exceeding from luminaire. Hardware All exposed screws shall be complete with Ceramic primer seal base coat to reduce seizing of the parts and offers a high resistance to corrosion. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. LED products (manufacturing standard) The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC and ANSI/ ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. Quality control Manufactured to ISO standards and ISO International Quality Standards Certification. Vibration resistance Meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over 100,000 cycles by an independent lab). For L80 only. Certifications and Compliance UL8750 and UL1598 compliant. ETL and cetl Listed to U.S. and Canadian safety standards for wet locations. In accordance with applicable ANSI C136 standards. Contemporary_Lantern_LED 06/15 page 4 of 5

10 L80 / L81 / L82 Contemporary Lantern Urban luminaire LED light engine technical information for L80 L81 L82 LED = Philips Lumileds Luxeon T, CRI = 70, CCT = 4000K (/ 350K) System (LED driver) rated life = 100,000 hrs 1 Typical Typical System Luminaire Typical LED LED system Current HID 3 Efficacy BUG delivered current Module wattage equivalent Rating rating lumens 120V 208V 240V 277V (ma) (W) 2 (Lm/W) 30W16LED4KTLE W 67 B1U3G1 30W16LED4KTLE W 68 B1U3G1 30W16LED4KTLE W 67 B1U3G1 30W16LED4KTLE W 68 B2U2G1 35W32LED4KTLE W 78 B1U3G1 35W32LED4KTLE W 77 B1U3G1 35W32LED4KTLE W 77 B1U3G1 35W32LED4KTLE W 78 B2U2G1 48W16LED4KTLE W 64 B1U3G1 48W16LED4KTLE W 61 B1U3G1 48W16LED4KTLE W 63 B1U3G1 48W16LED4KTLE W 65 B3U2G1 55W32LED4KTLE W 76 B1U3G1 55W32LED4KTLE W 75 B1U3G1 55W32LED4KTLE W 75 B1U3G2 55W32LED4KTLE W 77 B3U2G1 70W64LED4KTLE W 77 B1U3G1 70W64LED4KTLE W 77 B1U3G2 70W64LED4KTLE W 77 B1U3G2 70W64LED4KTLE W 78 B3U2G2 72W32LED4KTLE W 71 B1U3G1 72W32LED4KTLE W 72 B1U3G2 72W32LED4KTLE W 71 B1U3G2 72W32LED4KTLE W 72 B3U2G2 80W48LED4KTLE W 75 B1U3G1 80W48LED4KTLE W 75 B1U3G2 80W48LED4KTLE W 74 B1U3G2 80W48LED4KTLE W 76 B3U3G2 1. L70 = 70,000 hrs (at ambient temperature = 25 C) 2. System wattage includes the lamp and the LED driver 3. Equivalence should always be confirmed by a photometric layout Note : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips Koninklijke Philips N.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires Contemporary_Lantern_LED 06/15 page 5 of 5 Philips Lighting, North America Corporation 200 Franklin Square Drive, Somerset, NJ Tel Imported by: Philips Lighting, A division of Philips Electronics Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

11 iqled TAPE LIGHT 5050 CHIP SERIES iq W/ft: WET RATED QTran s iq67 flexible LED tape light is wet listed and available in multiple color temperatures ranging from 2500K 4000K. The 2.6 W/Ft utilizes the 5050 chip, can come in a 35' reel, has cut points of 6.57", can be cut to length in the field or cut to length at the QTran factory. The lumen output of this LED makes it perfect for most exterior or interior application where a coated LED is required. iq67 iq Series Color Temp 50 Chip 90 CRI 2.6 Watts Per FT Length FEATURES COMPATIBLE EXTRUSIONS LED life time 40,000 hours Operating temperature: 4ºF ~ 113ºF Suitable for dry, damp or wet locations NonFerrous Material 6.57" cut points Field cuttable 3 year Warranty NOTE: Can be used in wet locations. iqawide iqa45dwrd iqa45dw90 COMPATIBLE POWER SUPPLIES Interior Applications iq QJB & QJBL Q6MDC & DCCAP QTMeLED, QTMDC & DCCAP iqph Max Run / Reel Length: 35ft* ColorTemp: 2500K Voltage: 24VDC CRI: 90 LM: 79 Watts Per Ft: 2.6 Lumens Per Ft: 150 iq Max Run / Reel Length: 35ft* ColorTemp: 2700K Voltage: 24VDC CRI: 90 LM: 79 Watts Per Ft: 2.6 Lumens Per Ft: 155 Exterior Applications QOMeLED, QOMDC & DCCAP QSETeLED & QSETmLED QHEXMiniDC iqph DIMENSIONS iq Max Run / Reel Length: 35ft* ColorTemp: 3000K Voltage: 24VDC CRI: 90 LM: 79 Watts Per Ft: 2.6 Lumens Per Ft: 154 LEAD WIRE.48" iq " Max Run / Reel Length: 35ft* ColorTemp: 3500K Voltage: 24VDC CRI: 90 LM: 79 Watts Per Ft: 2.6 Lumens Per Ft: " LED Seperation.25" 6.57" Cut Length.48" iq Max Run / Reel Length: 35ft* ColorTemp: 4000K Voltage: 24VDC CRI: 90 LM: 79 Watts Per Ft: 2.6 Lumens Per Ft: 217 NOTE: *Maximum length for one run of iq67 LED 2.6. Individual Power supply cut sheets Cut marks of LED tape allows for changes in the field. will provide max distance/loads per power supply. 2.6 watts per foot = cut every 6.57" NOTE: QTran offers multiple LED Chip offerings based upon size and pitch,each Lead wire comes standard on all LEDs in 18"(20/2 AWG) utilizing its own binning. Utilization of multiple outputs within the same chip family will ensure flawless color matching and similar overall diffusion. COMPLIANT 2016.V02 PROJECT NAME DATE COMPANY TYPE NOTE 2016, QTran Inc. 155 Hill St. Milford, CT All rights reserved sales@qtran.com 1

12 Electronic 010V Dimming QTM for interior QOM for exterior iq LED TAPE LIGHT COMPATIBLE POWER SUPPLIES 010V DIMMABLE POWER SUPPLY _ Negative Positive #0674 FT. QTRAN RIP STRIP TM P/N M 010V DIMMING iqled LED Tape Light : Wire lead can be trimmed to length as needed SECONDARY PRIMARY GND HOT NEU GREY PURPLE Electronic Driver NonDimming QTM for interior QOM for exterior _ Negative Positive #0674 FT. QTRAN RIP STRIP TM P/N M LED Tape Light : Wire lead can be trimmed to length as needed iqled SECONDARY PRIMARY GND HOT NEU 2016, QTran Inc. 155 Hill St. Milford, CT All rights reserved sales@qtran.com 2

13 iq LED TAPE LIGHT COMPATIBLE POWER SUPPLIES Magnetic with Dimmer DC or DCCAP QT & Q6 for interior QOM for exterior Magnetic without Dimmer DC or DCCAP QT & Q6 for interior QOM for exterior _ Negative Positive _ Negative Positive #0674 FT. QTRAN RIP STRIP TM P/N M #0674 FT. QTRAN RIP STRIP TM P/N M iqled Tape Light : Wire lead can be trimmed to length as needed iqled SECONDARY PRIMARY HOT NEU GND DIMMER WITH NEUTRAL FORWARD PHASE MLV HOT iqled Tape Light : Wire lead can be trimmed to length as needed iqled SECONDARY PRIMARY HOT NEU GND Phase Controlled Dimming iqph80 _ Negative Positive #0674 FT. QTRAN RIP STRIP TM P/N M iqled Tape Light : Wire lead can be trimmed to length as needed iqled HOT NEU GND SECONDARY PRIMARY 2016, QTran Inc. 155 Hill St. Milford, CT All rights reserved sales@qtran.com 3

14 Rev: 2016/10/05 OW1202 CYPRESS Type: Project: VisaLighting.com/products/Cypress Order Code: OW1202 MODEL SOURCE Fill in shaded boxes using information listed below VOLTAGE FINISH OPTION SOURCE (Select one) VOLTAGE (Select one) MVOLT fixture accepts 120 through 277 input voltage LED Sources are 83CRI, within 3step MacAdam and are dimmable 010V to 1% LED Sources CCT Delivered Lumens Power (Watts) Voltage L30KL 3000K L35KL 3500K L40KL L30KH 4000K 3000K MVOLT L35KH 3500K L40KH 4000K Fluorescent Sources 2TF26 26w triple, 4pin GX24q3 base 2TF32 32w triple, 4pin GX24q3 base Voltage Select MVOLT, 120V, 277V or 347V The profile and light output of this series is punctuated with geometric windows of light and are available in three sizes that can be mounted in either the up or down position. DIMENSIONS Depth is measured from wall to front of fixture Mounting Center is measured from top of fixture to center of junction box W = Width H = Height D = Depth MC = Mounting Center FINISHES (Select one) See page 2 for color chart Powder Coat Painted Finishes (Standard) AG7038 BMAT BRNZ BSIL Agate Grey Bronze Matte Bronze Blade Silver CVBL CW9001 GLIM GSIL Cove Blue Cream White Glimmer Graphite Silver GW9002 HTHR JB9005 OBRZ Grey White Heather Jet Black Old Bronze PB1035 RUST SUNG TW9016 Pearl Beige Rust Sungold Traffic White OPTIONS (Multiple Selections Allowed) Option availability may be interdependent with Voltage, Source or Other Options FUSE Fluorescent Fusing, specify 120V or 277V REM Remote emergency battery pack for fluorescent; damp location 50 F minimum (not available with 347V) XPS Express 10 day shipping. Items marked with a bullet () are not available with XPS W 101/2" (267 mm) H 241/8" (613 mm) D 71/2" (191 mm) MC 12" (305 mm) H MC W Visa Lighting. Design Modification Rights Reserved. XPS ETL Listed 5 Year Warranty VISA VisaLighting.com Page 1

15 ECN Rev: 2016/10/05 OW1202 CYPRESS Photometrics Technical Information Relative Scale Drawing Integral power supply for LED Fixture tested per LM79 standard Modular design for replacement of LED source and power supply High power factor electronic fluorescent ballast, 0 F / 18 C starting temperature (fluorescent) Uplight or downlight application Surface mounts over a standard electrical junction box (by others) Clear tempered glass top lens 1/8" thick white acrylic diffuser wf1 rated, UV stable wul94 HB Flame Class rated Housing fabricated of heavy gauge welded and gasketed aluminum No VOC powder coat paint finish ETL listed for wet location mounting 4' above grade Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' Painted Finishes (Standard) Specify color code when ordering. For accurate color matching, individual paint and finish samples are available upon request For additional information see VisaLighting.com/materialsfinishes TW9016 Traffic White (RAL9016) CW9001 Cream (RAL9001) GW9002 Grey White (RAL9002) JB9005 Jet Black (RAL9005) AG7038 Agate Grey (RAL7038) HTHR Heather CVBL Cove Blue BSIL Blade Silver GSIL Graphite Silver GLIM Glimmer SUNG Sungold BRNZ Bronze OBRZ Old Bronze BMAT Bronze Matte PB1035 Pearl Beige (RAL1035) RUST Rust This document contains information which is the property of Visa Lighting, and may not, in whole or in part, be duplicated, disclosed, or used for design or manufacturing purposes without the prior written permission of Visa Lighting. Visa Lighting. Design Modification Rights Reserved VISA VisaLighting.com Page 2