B. Installation of instrumentation and control equipment including field transmitters, sensing elements, and miscellaneous devices.
|
|
- Kathryn Harvey
- 6 years ago
- Views:
Transcription
1 ms1505 SECTION Page 1 PART 1 GENERAL 1.01 SECTION INCLUDES A. Instruments and control equipment. B. Installation of instrumentation and control equipment including field transmitters, sensing elements, and miscellaneous devices INFORMATIONAL SUBMITTALS A. Product Data: Manufacturer's data or specification sheets for instrumentation and control devices showing design parameters, equipment catalog designations, calibration range, and clearly identifying options provided ACTION SUBMITTALS A. Submitted information relating to instrumentation and control devices shall be referenced by instrument tag number, as defined herein. B. Shop Drawings: 1. Certified outline, installation, and wiring interconnection drawings for equipment and accessories provided. 2. Wiring interconnection drawings shall define terminal numbers and functions for interface with other instruments and equipment CLOSEOUT SUBMITTALS A. Operation and maintenance manuals: 1. Complete instruction manuals and parts list covering installation, operation, wiring interconnections, and maintenance of equipment. Manuals shall include interface drawings defining terminal numbers and functions for interface with other instruments or equipment. 2. Control loop diagrams for instrument and control devices wired to control system enclosures. Diagrams shall be in accordance with minimum requirements of ANSI/lSA S5.4. Control loop diagrams shall also include manufacturer, model number, and calibrated range; setpoint values for alarm and shutdown devices; equipment numbers for racks, panels, and junction boxes; exact location of device including column, row, and elevation; and control of solenoid valve fail-safe operation. Assign tag number oriented cable, and wire numbers. 3..Jchematic and wiring interconnection drawings for instruments wired to PLC Control Enclosures, motor control centers, terminal panels, and motor or relay-based control logic. Show color of wire, all termination points, terminal numbers, cable and wire numbers. Assign cable and wire numbers for external panel wiring. Cable and wire numbers shall be tag number oriented. -- B. Record Documents: 1. "As-built" control loop diagrams and schematic drawings as defined above. 2. Instrumentation calibration and commissioning reports as defined in Section MAINTENANCE MATERIALS A. Provide 1-year supply of spare parts as recommended by equipment manufacturer as part of initial installation QUALITY ASSURANCE A. Instruments and control equipment will be readily available from U.S. suppliers. B. Field instrumentation shall be standardized insofar as practicable.
2 PRIMARY PROCESS MEASURING DEVICES Page 2 - SECTION ms SITE CONDITIONS A. Indoor applications: 1. Temperature: 50 to 110 F. 2. Humidity: 10 to 95%, noncondensing. B. Outdoor applications: 1. Temperature: -30 to 120 F. 2. Humidity: 10 to 100%. C. Electrical power source: 120-volts ac, 60 Hz. D. Analog signals: 1. Voltage: 24-volt dc. t 2. Range: 4 to 20 ma. 3. Load impedance: ohms, minimum. E. Discrete signals: 1. Hardwired control: a. Voltage: 120-volt ac. b. Contact type: Form C (1 NO, 1 NC), minimum. c. Rating: 5 amperes at 120-volts ac, minimum. 2. PLC applications: a. Voltage: 24-volt dc. b. Contact type: Form C (1 NO, 1 NC), minimum. c. Rating: 2 amperes at 30-volt dc, minimum PART 2 PRODUCTS 2.01 SYSTEM REQUIREMENTS A. Do not use instruments or other devices containing nonencapsulated mercury. B. Measuring devices shall be complete with necessary condensation chambers, isolating valves and seal pots. C. Bellows-type meters shall be capable of taking full line pressure on one side only, without damage or loss of calibration. D. Trgrjsmitter fill fluid, if used, shall be silicone, unless otherwise specified. E. Diaphragm seals shall be used where corrosive or fouling liquids require process isolation from the transmitter element. Seals shall be standardized as much as possible for interchangeability IMPULSE PIPING A. Tubing: Type 316 welded stainless steel, 1/2" OD x 0.035" wall, ASTM A269. B. Joints: Compression fittings. C. Fittings: Compression, Type 316 stainless steel. D. Valves: 1. Type: Ball. 2. Material: Type 316 stainless steel, ASTM A Pressure class: 1,500 psig to 150 F. 4. Internals: Type 316 stainless steel ball, Teflon packing.
3 ms1505 SECTION Page INSTRUMENT WIRING A. Provide No. 16 AWG single twisted shielded pair cable for 24-volt de analog and discrete signals. B. Provide No. 16 AWG, 600-volt wire for 120-volt ac signals. C. Provide No. 12 AWG, 600-volt wire for 120-volt ac power circuits. D. Refer to Section INSTRUMENTS A. Propeller flowmeter: a. West Des Moines Pressure Zone 3 Booster Pump Station Discharge Flow, FE b. West Des Moines existing 88* Street Pump Station North Flow, no tag. c. West Des Moines existing 88* Street Pump Station South Flow, no tag. 2. Line size: Meter size: 16". 4. Quantity: Flowmeter measuring range: to 5500 gpm. 6. Low flow limit: 450 gpm. 7. Flowtube: a. Location: Pump room. b. Piping connection: Flanged, AWWA Class 150. c. Accuracy: 100% +/- 2% of actual throughput. d. Meter body and straightening vane: Fabricated steel, standard. e. Propeller: Polypropylene, standard. f. Coating: Ceramic coated stainless steel. g. Meter head: Ductile iron. 8. Register: a. Mounting: Integral to meter body. b. Type: Hermetically sealed, direct reading. c. Display: Six digit, straight reading type with low flow indication and full 3" dial face with 100 division increments and center sweep hand. d. Power required: None. e. Outputs: Hall Effect Transmitter (HET) for remote 4-20 ma for continuous flow measurement and pulse for remote totalization. f. Calibration: gpm for continuous flow. 9. Temote readoyt: a. Application and tag number: 1) West Des Moines Pressure Zone 3 Booster Pump Station Discharge Elow, FH ) North and south flow remote readouts are existing and shall not be replaced. b. Quantity: 1. c. Area classification: NEMA 1. d. Mounting: Flush-mounted on PLC enclosure door. PLC enclosure located in Electrical Room. e. Power required: 120-volt ac., power from PLC enclosure source. f. Display: 8-digit 0.46" red backlit LED showing totalized flow and instantaneous flow rate. g. Input: Pulse signal from HET register. h. Output: 4-20 ma proportional to flow rate. Signal powered by readout unit, feeding loads up to 500 ohm. i. Interconnecting cable: HSP high speed pickup cable to be provided with Act-Pak. Contractor to determine cable length required. j. Model: Act-Pak 1100D-P. 10. Manufacturer: Sensus, Model 101 no substitutions. B. Pressure transmitter:
4 PRIMARY PROCESS MEASURING DEVICES Page 4 - SECTION ms1505 a. West Des Moines Pressure Zone 3 Booster Pump Station Suction Pressure, PIT-8800A. b. West Des Moines Pressure Zone 3 Booster Pump Station Discharge Pressure, PIT-8800B. 2. Mounting: Discharge header piping in flow meter vault. 3. Type: 2-wire, 24-volt. 4. Wetted parts: Type 316 stainless steel. 5. Output signal: 4-20 ma. 6. Measurement range: psig. 7. Calibration: psig. 8. Electrical classification: NEMA 4X. [ 9. Accessories: Block and bleed 2-valve manifold, Tyco/Anderson Greenwood M25VIS44. Individually piped valves not acceptable. 10. Manufacturer: Foxboro Model IGP10-A22D1F; no substitutions. C. Pressure gage: a. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.1 suction pressure, PI-8801A. b. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.1 discharge pressure, PI-8801B. c. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.2 suction pressure, PI-8802A. d. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.2 discharge pressure, PI-8802B. e. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.3 suction pressure, PI-8803A. f. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.3 discharge pressure, PI-8803B. 2. Mounting: Process piping. 3. Size: 4-1/2" diagonal face. 4. Material of construction: a. Housing: Phenolic. b. Wetted parts: Type 316 stainless steel. 5. Scale: psig valve manifold: Tyco/Anderson Greenwood M25VIS44. Individually piped valves not acceptable. 7. Manufacturer: Ashcroft SS-04L-XLL PLUS with XLL dampening option, or equal. D. Thermal flow switches: a. West Des Moines Pressure Zone 3 Booster Pump Station Pump No.1 discharge, FS West Des Moines Pressure Zone 3 Booster Pump Station Pump No.2 discharge, FS c. West Des IVloines Pressure Zone 3 Booster Pump Station Pump No.3 discharge, FS Type: Thermal dispersion. 3. Process line size: 16" (400 mm. 4. Probe: a. Style: Spherical tip. b. Flow range: 0.01 to 5.0 fps for liquid applications. c. Construction material: Type 316 stainless steel. d. Process connection: 3/4" (19 mm) NPT. e. Insertion length: 2" (50 mm). Switch assembly: a. Ambient temperature limits: -40 F to 158 F. b. Area classification: Nonhazardous. c. Power required: 24-votl dc. d. Enclosure material: Aluminum. e. Conduit connection: 3/4" (19 mm) NPT. f. Output: DPDT relay contact, rated 8 amperes at 30 volts dc. g. Set point: 0.5 fps increasing. h. Window in enclosure: None.
5 ms1505 SECTION Page 5 i. Mounting location to probe: Integral. 6. Manufacturer: Magnetrol TD2-8D00-030, or equal. E. Temperature switch: West Des Moines Pressure Zone 3 Booster Pump Station pump room ambient temperature monitoring, TSL Mounting: Pump room wall. 3. Type: Vapor pressure thermal system. 4. Range: F. 5. Output: Dual dry contact switch. 6. Contact rating: 6-ampere, 30-volt dc. 7. Element mounting: Direct. 8. Element length: 2-3/4" std. 9. Thermowell: *None required*. 10. Enclosure rating: NEMA 4/4X. 11. Calibration: Low temperature: 50 F. 12. Manufacturer: Ashcroft, Model T424TS027 0 to100, or equal INSTRUMENT IDENTIFICATION A. Each instrument and control device shall have a tag permanently attached to case with following applicable information: 1. Tag number. 2. Manufacturer's name. 3. Model number. 4. Serial number. 5. Operating range. 6. Calibration setting/range. 7. Power rating. PART 3 EXECUTION 3.01 INSTALLATION - GENERAL A. Install instrument and control devices in accordance with manufacturer's recommendations and/or where approved by Owner's Representative. B. Provide and install conduit and cabling to interface instrumentation with field junction boxes and PLC control panel. Refer to Section C. Locate instruments and control devices as depicted on instrumentation diagrams, and/or designated by Owner's Representative. D. Mount instruments so they are rigidly suppaded, level and plumb, and in such a manner as to provide accessibility; protection from damage; isolation from heat, shock and vibration; and freedom from interference with other equipment, piping, and electrical work. E. Do not install instruments until heavy construction work adjacent to instruments has been completed to extent that damage will be unlikely to installation by such construction work. F. Manufacturer's recommendations referred to herein shall be as stated in manufacturer's installation manual and/or by manufacturer's service representative. Final interpretation of "installation requirements" will be by Owner's Representative INSTRUMENT EQUIPMENT MOUNTING A. Mount instrumentation equipment to building steel, concrete floors, or walls using pipe mounting stands or field-fabricated mounting brackets.
6 PRIMARY PROCESS MEASURING DEVICES Page 6 - SECTION ms Secure instrumentation equipment mounting bracket to building steel by welding, and to concrete or masonry building structure by expansion-type anchors. Do not mount instrumentation equipment to exterior removable panels. 2. If vlbration-free location is not available for instrument mounting, appropriate vibration shock mounting shall be provided by use of rubber grommets or other vlbration dampeners designed for vibration absorption subject to Owner's review. Mounting of process pressure and temperature gages and process pressure and temperature switches to process piping shall be allowable only if vibration is minimized. B. Instrument accessibility: Following general rules shall be adhered to, unless limited by other requirements in design of system. 1. Locate instrument process connections for maximum convenience in operation and servicing of instrument. Orient connections so instruments or piping will not obstruct aisles, platforms, or ladders. 2. Install field-mounted instruments so they are accessible from grade, platform, or permanent ladder. Instruments requiring adjustment or inspection shall be accessible for servicing from grade, walkway, platform, or permanent ladder. 3. Locate remote instruments and control devices (devices not located in or on process lines) at nominal height of 4-1/2' above finished floor, grade, or platform. Provide instrument racks for location in which 3 or more instruments or control devices are located within close proximity of each other. 4. Control valves shall be accessible from grade or platforms. Use manufacturer's recommended clearance distances. 5. Mount local indicators, recorders, and controllers so they are readable, controllable, and serviceable from grade or platforms IMPULSE PIPING INSTALLATION A. Install instrument impulse piping parallel (except for slope) to building lines and other piping following instrument manufacturer's instructions. 1. Instrument impulse piping work shall be from last block valve through, and including, blowdown piping to nearest equipment drain. 2. Install horizontal impulse piping with slope of 1" per foot. a. Slope impulse piping toward instrument for liquid and steam service. b. Slope impulse piping away from instrument for gas service. 3. Impulse piping shall be continuously supported with 12-gage aluminum angle and held in place with appropriate tubing clips and fasteners. Install tubing supports in such a manner to preclude fatigue failure of tubing due to vibration. B. Inslall expansion loops in impulse piping installations where movement of last block valve and instrument is not irt same plane or length of expansion varies. C. Suppod pressure gages and other instruments connected to impulse piping independently_of tubing. Provide ample expansion loops in tubing connections to instruments subject to vibrations to prevent failure due to metal fatigue. D. Furnish and install accessories required for complete impulse piping system including instrument isolation valves, snubbers, siphons, and calibration and test connections at instrument WIRE AND CABLE INSTALLATION A. Maintain minimum of 1' separation between signals operating at voltages greater than 120-volts ac and instrumentation or communications signals. Group and route wire/cables as follows: 1. Low-voltage/low current dc instrumentation signals (30-volts/50 ma or lower). 2. High-voltage de alarm signals (48-volts or greater). 3. Low-voltage ac control signals (120-volts or lower). 4. High-voltage ac power signals (greater than 120-volts). 5. Communications signals.
7 ms1505 SECTION Page 7 B. When instrumentation wiring is required within conduit, install wiring within metallic conduit and mounted to insure immunity from EMF noise interference. C. Install continuous wire from terminal-to-terminal. Splices not acceptable. D. Shielded signal cable: 1. Connect shields to common ground at source of loop power. 2. Shields of multiple cable runs shall be connected on separate terminal blocks, but not grounded. 3. Cut and tape shield at destination end. E. Identify both ends of wires and/or cables with permanent wire marker CLEANING A. Before assembly or erection, thoroughly clean instruments of temporary protective coatings and foreign materials. B. After erection of equipment, clean external surfaces of oil, grease, dirt, or other foreign material. 1) S. A. Tripmacker 2) T. J. Mergen END OF SECTION
SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationSECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS
SECTION 221123.13 - DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSOLAR HEATING SYSTEM
SECTION 13600 SOLAR HEATING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07600 - Flashing and Sheet Metal. 2. 07900 - Joint Sealers. 3. 15260 - Thermal Insulation (Plumbing). 4. 15410 - Piping
More informationF-2700 SERIES INSERTION VORTEX FLOW METER
F-2700 SERIES INSERTION VORTEX FLOW METER APPLICATIONS Saturated steam Hot water to 500 F (260 C) standard 750 F (400 C) optional Applications with optional pressure sensor Superheated steam to 500 F (260
More informationF-1500 SERIES INSERTION TURBINE FLOW METER
F-1500 SERIES INSERTION TURBINE FLOW METER APPLICATIONS Saturated steam Hot water to 450 F (232 C) standard 850 F (454 C) optional Applications with optional pressure sensor Superheated steam to 450 F
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
PART DESIGN DIRECTIVE. QUALITY ASSURANCE SECTION 530 METERS AND GAGES A. Comply with applicable UL standards pertaining to meters and gages and with applicable portions of ASME and Instrument Society of
More informationGuide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
More informationSECTION HYDRAULIC FOUR FOLD DOORS MODEL 48 LOUVERS
SECTION 08350 HYDRAULIC FOUR FOLD DOORS MODEL 48 LOUVERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division-1
More informationF-1500 SERIES INSERTION TURBINE FLOW METER FEATURES Belcher Road South, Largo, FL USA Tel +1 (727) Fax +1 (727)
F-1500 SERIES INSERTION TURBINE FLOW METER Insertion turbine flow meters are ideal for use in larger steam lines where downsizing the line size to improve flow measurement is not desirable. In these applications,
More informationSECTION METERS AND GAGES FOR HVAC PIPING
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. 1.2 SUMMARY A. This
More informationF-2700 SERIES INSERTION VORTEX FLOW METER
F-2700 SERIES INSERTION VORTEX FLOW METER CALIBRATION Every ONICON flow meter is wet calibrated in a flow laboratory against standards that are directly traceable to N.I.S.T. A certificate of calibration
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230519 - METERS AND GAUGES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 ABBREVIATIONS A. Degree
More informationF-2600 SERIES INLINE VORTEX FLOW METER
F-2600 SERIES INLINE VORTEX FLOW METER APPLICATIONS Saturated steam Hot water to 500 F (260 C) standard 750 F (400 C) optional Applications with optional pressure sensor Superheated steam to 500 F (260
More informationSECTION METERS AND GAGES FOR PLUMBING PIPING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Positive displacement meters. B. Flow meters. SECTION 22 0519 METERS AND GAGES FOR C. Pressure gages and pressure gage taps. D. Thermometers and thermometer wells.
More information.2 Section Waste Management and Disposal..5 Section Thermometers and Pressure Gauges Piping Systems.
Issued 2005/06/01 Section 15440 Plumbing Pumps Page 1 of 9 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3 Section 01780 Closeout
More informationF-4600 INLINE ULTRASONIC FLOW METER Installation and Operation Guide
F-4600 INLINE ULTRASONIC FLOW METER Installation and Operation Guide 11451 Belcher Road South, Largo, FL 33773 USA Tel +1 (727) 447-6140 Fax +1 (727) 442-5699 1054-7 / 34405 www.onicon.com sales@onicon.com
More informationSECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS
SECTION 22 1123.13 DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationNC State University Design and Construction Guidelines Division 23 Energy Management
1.1 Purpose A. The following guidelines provide the methodology and requirements to assure that designs meet NC State standards for campus utility metering. 2.1 General Requirements A. Meters shall have
More informationSECTION HVAC CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY. A. Section Includes:
SECTION 15970 HVAC CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Thermostats, temperature transmitters, controllers, automatic valves, dampers, damper operators, pneumatic/ electric
More informationLow Profile Insertion Vortex
Low Profile Insertion Vortex Product Features The same insertion meter can measure Steam, Gases or Liquids. Standardize on an insertion bar that can measure line sizes 2 24 Heavy Duty & Maintenance Free
More informationSECTION ELECTRIC MOTOR ACTUATORS FOR VALVES
SECTION 40 92 10 - ELECTRIC MOTOR ACTUATORS FOR VALVES PART 1 - GENERAL A. Description This section includes materials and installation of electric motor actuators for valves. B. Submittals 1. Submit shop
More informationSection SWITCHBOARDS. Introduction. Part 1 - General. Related Work
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Related Work Section 16070 Seismic Anchorage and Restraint Section 16075 Electrical Identification Section 16080 Power Distribution Acceptance
More informationPropeller Meters. Flow measurement solutions for water and wastewater
Propeller Meters Propeller Meters Flow measurement solutions for water and wastewater Perfect flow measurement solutions Water Specialties Propeller Meters are designed and manufactured with precise techniques
More informationSECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS
SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
More informationLiebert CSU3000 DISCONTINUED PRODUCT. CSI Mainframe Cooling Systems. CT(Three Module) Model 20, 30 & 37 ton Mainframe Chiller
DISCONTINUED PRODUCT CSI 15621 - Mainframe Cooling Systems 1.1 SUMMARY Liebert CSU3000 CT(Three Module) Model 20, 30 & 37 ton Mainframe Chiller GUIDE SPECIFICATIONS 1.0 GENERAL These specifications describe
More informationSECTION METERS AND GAUGES
SECTION 22 05 19 PART 1 GENERAL 1.1 DESCRIPTION OF WORK: A. Extent of meters and gauges required by this section is indicated on drawings and/or specified in other Division-22 sections. B. Types of meters
More informationLEAD FREE * LFF113RFP Flood Protection Shut Down Valve
Technical Bulletin TB-ACV-LFF11RFP LEAD FREE * LFF11RFP Flood Protection Shut Down Valve Installed upstream of Reduced Zone Backflow Preventer. Normally Open Valve - Closes when continuous discharge from
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS WARNING: WARNING: www.altronicinc.com DEVIATION DEVIATION FROM THESE FROM INSTRUCTIONS THESE INSTRUCTIONS MAY LEAD MAY TO LEAD IMPROPER TO IMPROPER OP- ERATION OF ENGINE THE MACHINE
More informationUniversity of Houston Master Construction Specifications Insert Project Name SECTION ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL
SECTION 23 04 10 ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationRosemount 8750WA Magnetic Flowmeter System For Water and Wastewater Industries
Product Data Sheet January 214 813-1-475, Rev FA Rosemount 875WA Magnetic Flowmeter System For Water and Wastewater Industries THE 875WA MAGNETIC FLOWMETER Rosemount reliability in a customized offering
More informationSECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 26 28 16 ENCLOSED SWITCHES AND PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following individually mounted, enclosed switches and circuit breakers rated 600V AC and less: 1. Fusible switches.
More informationSAMPLE PRODUCT SPECIFICATIONS
SAMPLE PRODUCT SPECIFICATIONS Thermometers & Gauges Product Guide Specification THERMOMETERS & GAUGES Specifier Notes: This section covers Miljoco Corporation thermometers and pressure gauges suitable
More informationSECTION MOTORS AND VARIABLE FREQUENCY DRIVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Related Sections: 1. Section 15050 - Basic Mechanical Requirements. 2. Section 15051 - Motors. 3. Section 15185 - Hydronic Pumps. 4. Section 15625 - Centrifugal
More informationLEAD FREE * LFF113FP. Wireless Smart Flood Protection Shut Down Valve with SentryPlus Alert Technology. Materials NOTICE NOTICE ES--LFF113FP
ES--LFFFP Job Name Contractor Job Location Approval Engineer Contractor s P.O. No. Approval Representative LEAD FREE * LFFFP Wireless Smart Flood Protection Shut Down Valve with SentryPlus Alert Technology
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More informationAppendix. Clearance. Skewed profiles. Application Schematics
Appendix Application Schematics The purpose of the application schematics is to show different applications and the best sensor location for a particular application. Clearance Because the sensor will
More informationSECTION ELECTRONIC ACTUATED PRESSURE REDUCING VALVES AND ACCESSORIES
SECTION 33 12 16.05 REDUCING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 THE REQUIREMENT A. The Electronic Actuated Pressure Reducing Valve (PRV) shall maintain a constant downstream pressure regardless
More informationSECTION DC POWER SUPPLY/BATTERY CHARGER
SECTION 26 33 05 PART 1 - GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide the single-phase heavy-duty industrial battery charger and all accessories required, complete and operable, in accordance
More informationAir Handling Unit Construction Checklist
Air Handling Unit Construction Checklist Project: Date: AHU Tag: Location: Submittal / Approvals Submittal. The above equipment and systems integral to them are complete and ready for functional testing.
More informationMichigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE
PAGE 261116-1 SECTION 261116 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More informationA. General: Deliver, store and handle wire and cable in accordance with the manufacturer's instructions and as specified in Division 1.
SECTION 16120 WIRES AND CABLES 600 VOLTS AND BELOW PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Requirements for providing all wires and cables rated at 600 volts and below for complete electrical systems
More informationMETAL VAREA-METER STRAIGHT THROUGH TYPE ROTAMETER
TECHNICAL INFORMATION METAL VAREA-METER STRAIGHT THROUGH TYPE ROTAMETER Electronic Transmitter INTRODUCING THE METAL TUBE VAREA-METER U.S. Filter/Wallace & Tiernan Products straight through metal tube
More informationSubmittal DIMENSIONS SIZE FAN SIZE L W H C D E F G J K [406] [508] 25 [635] [406] 16 [406] 16 [406] 39-1/2 [1003] 44-1/2 [1130] 51 [1295] 59 [1499]
BC--1.0 03-01-1 Belt Drive Blower Coil Unit, Basic Unit Discharge ARGT. 1 4. See page 1 for filter rack details. 5. Base rail is optional on he base unit. See page 13. Base rails must be used with mixing
More informationSECTION VALVES AND OPERATORS
SECTION 15200 VALVES AND OPERATORS PART 1 - GENERAL 1.1 SUBMITTALS A. Shop Drawings: 1. Product data sheets for make and model. 2. Complete catalog information, descriptive literature, specifications,
More informationSECTION VII METERING INSTALLATIONS
SECTION VII METERING INSTALLATIONS 1. GENERAL Outdoor metering is required for all new service installations to one, two, and three family detached, semi-detached and row houses. 2. COMPANY FURNISHES AND
More informationSECTION METERS AND GAUGES. 0.1 All meters and electronic gauges shall be able to communicate with the current BAS System (Johnson METASYS).
SECTION 15122 - METERS AND GAUGES PART 1 GENERAL 0.1 All meters and electronic gauges shall be able to communicate with the current BAS System (Johnson METASYS). 1.1 RELATED DOCUMENTS A. Drawings and general
More informationSPANS AND RANGES. Lower Range Limits 150 in. H 2 O ( 38 kpa) 800 in. H 2 O ( 200 kpa)
Specifications 571T, 572T Electronic Differential Pressure Transmitter with Sanitary/ Aseptic Remote Seal Elements ±0.2% of span accuracy Spans from 25 to 800 inches H2O Outstanding temperature stability
More informationXFL70 FLOW RATE (LPM) Flow Rate (GPM)
Pump Specifications XFL70 Series ¾ HP Submersible Effluent Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 50 XFL70 FLOW RATE (LPM) 0 50 100 150 200 250
More informationSECTION AIR TERMINAL UNITS
SECTION 23 36 00 AIR TERMINAL UNITS PART 1 - GENERAL 1.1 SUMMARY A. Section includes constant volume terminal units, variable volume terminal units, dual duct terminal units, fan powered terminal units,
More informationBULLETIN NO.ELEC IM121/10A Replaces IM121/09A
Mid-West Instrument BULLETIN NO.ELEC IM121/10A Replaces IM121/09A INSPECTION Model 121 Indicating Differential Pressure Switch / Transmitter Electrical: Installation and Operating Instructions Upon receipt
More informationXLE50 FLOW RATE (LPM) Flow Rate (GPM)
Pump Specifications XLE50 Series ½ HP Submersible Sewage Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 25 XLE50 FLOW RATE (LPM) 0 100 200 300 400 500
More informationAccessories & Service Kits
Table of Contents Accessories & Service Kits Product Page # OpenAir Electric Tools E-46 Damper Shaft Cranks E-46 Mounting Hardware E-47 Damper Push Rods E-47 Anti-rotation Brackets E-48 Shaft Adapters
More informationENGINEERING MANUAL PRESSURE STEAM HUMIDIFIERS
Ogdensburg, New York, U.S.A. 1-866-NORTEC-1 Ottawa, Ontario, Canada 1-866-NORTEC-1 ENGINEERING MANUAL PRESSURE STEAM HUMIDIFIERS The LS Series is a cost effective way to provide precise humidity control,
More informationVSPS PACKAGE BOOSTER SYSTEM (END SUCTION PUMP DESIGN) FEATURES T Y P E
PACKAGE BOOSTER SYSTEM (END SUCTION PUMP DESIGN) PACKAGED PUMP SYSTEM WITH CAPACITIES TO 300GPM, PRESSURE BOOST TO 100PSI* WITH UP TO 25HP ON EACH PUMP AVAILABLE IN DUPLEX, AND TRIPLEX CONFIGURATION, AND
More informationF-2600 SERIES INLINE VORTEX FLOW METER
F-2600 SERIES ININE VORTEX FOW METER APPICATIONS Saturated steam Hot water to 500 F (260 C) standard 750 F (400 C) optional Applications with optional pressure sensor Superheated steam to 500 F (260 C)
More informationHerpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
More informationProMinent S i g m a / 3 Motor Diaphragm Metering Pumps
pk_2_071 pk_2_104 Overview: Sigma/ 3 Sigma/ 3 Basic Type (S3Ba) Sigma/ 3 Control Type (S3Ca) Ideal for applications requiring automation, large turndown and/or feed verification (see page 133 for spare
More informationPROJ. NO SECTION HYDRONIC PUMPS
SECTION 23 21 23 HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION METERS AND GAUGES FOR HVAC PIPING
SECTION 23 05 19 METERS AND GAUGES FOR HVAC PIPING PART 1 - GENERAL 1.1 SUMMARY A. Work included: Provision of materials, installation and testing of: 1. Thermometers 2. Thermometer Wells 3. Differential
More informationROLLER GATES. Waterman Industries of Egypt. Roller gates are nominated for heavy duty service where large loads and sizes are going to be encountered.
ROLLER GATES Roller Gates are ideally suited for controlling water in any large openings such as may be found in power plants, water and sewage treatment facilities, flood control projects, irrigation
More informationPATTERSON PUMP COMPANY
PATTERSON PUMP COMPANY A Gorman Rupp Company JOCKEY PUMP CONTROLLERS UL508 LISTED ETL LISTED FEB 013 Patterson Jockey Pump controllers are built to NEMA industrial standards and are UL508 listed and ETL
More informationFeatures Globe Valve 2-Way & 3-Way Assembly Features:
Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot
More informationSECTION GENERAL-SERVICE AIR COMPRESSOR PART 1 - GENERAL
13686.00 GENERAL SERVICE AIR COMPRESSOR 221519-1 SECTION 22 1519 - GENERAL-SERVICE AIR COMPRESSOR 1.1 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and general provisions of the Contract, including General
More informationHot Tap Insertion Vortex
Hot Tap Insertion Vortex Product Features The same insertion meter can measure Steam, Gases or Liquids. Standardize on an insertion bar that can measure line sizes 2 48 Heavy Duty & Maintenance Free Design
More informationMedium Voltage Standby non-paralleling Control GUIDE FORM SPECIFICATION
Medium Voltage Standby non-paralleling Control 1. GENERAL GUIDE FORM SPECIFICATION A. The requirements of the contract, Division 1, and part 16 apply to work in this section. 1.01 SECTIONS INCLUDE A. Medium
More informationSECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters
More informationSpecifications. Division 46 Water and Wastewater Equipment
Specifications Division 46 Water and Wastewater Equipment Section 46 4321 Circular Clarifier Equipment Part 1 - General 1.01 Summary A. Section Includes: Labor, materials, and equipment necessary for
More informationMid-West Instrument. Diaphragm Type Model 240. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 240/11 (SUPERSEDES BULLETIN NO. 240/06) Mid-West Instrument Diaphragm Type Model 240 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Field wireable
More informationKEL DIFFERENTIAL PRESSURE FLOWMETERS
KEL DIFFERENTIAL PRESSURE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Rugged Metal Construction Flow Rate to 2000 GPM Linear Scale For Horizontal or Vertical Pipes Threaded
More informationINLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1
INLINE Flow sensor for hazardous area II G/D - II D - II GD - I M Type SE0 Ex can be combined with... Flow meter with NAMUR or NPN/PNP output signal Mounting, dismounting of electronics by a Quarter-Turn
More informationMid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 220/11 (SUPERSEDES BULLETIN NO. 220/06) Mid-West Instrument Piston Type Model 220 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Low cost piston
More informationDW PADDLE-BELLOWS FLOWMETER & SWITCH
DW PADDLE-BELLOWS FLOWMETER & SWITCH Flow Pressure Level Temperature measurement monitoring control S3 Accuracy: ±3% Full Scale Excellent for Highly Contaminated Media Orientation Independent Brass or
More informationWilo Helix Vertical Multi-Stage, High Pressure Pumps. Engineering Specification
Wilo Helix Vertical Multi-Stage, High Pressure Pumps Engineering Specification PART 1 - GENERAL 1.1 WORK INCLUDED A. Furnish and install vertical multi-stage, high pressure, non-self priming, inline pressure
More informationINSERTION flowmeter with paddle wheel, ELEMENT design
INSERTION flowmeter with paddle wheel, design Up to PN, size of measurement pipes: DN to DN400 Configurable outputs: one or two transistor output(s) and single or dual 4... ma analog output(s) Removable
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 2123 - PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationTemperature Switches. General Instructions
This instruction provides information for mounting, electrical connection, process connection, and calibration of SOR Temperature Switches. The SOR Inc. Temperature Switch consists of a pressure switch
More informationPre-plumbed Blowdown Assembly ½ Model
Pre-plumbed Blowdown Assembly ½ Model 7760013 The pre-assembled blowdown configurations reduce installation time and component placement error. Each part of the assembly may also be ordered separately.
More informationFAIRCHILD T5200 SERIES ELECTRO-PNEUMATIC TRANSDUCER Installation, Operation and Maintenance Instructions
FAIRCHILD T500 SERIES ELECTRO-PNEUMATIC TRADUCER Installation, Operation and Maintenance Instructions Identification Number Underwriting Group Factory Mutual Canadian Standard T (F) (C) 500- Approval Class
More informationLEAD FREE * LFF113RFP Wireless Smart Flood Protection Shut Down Valve with SentryPlus Alert Technology
Technical Bulletin TB-ACV-LFF11RFP_SentryPlus LEAD FREE * LFF11RFP Wireless Smart Flood Protection Shut Down Valve with SentryPlus Alert Technology Installed upstream of Reduced Zone Backflow Preventer.
More informationBOILER BLOWDOWN CONDUCTIVITY CONTROLLER (CONTINUOUS METHOD)
LAKEWOOD INSTRUMENTS MODEL 260 SERIES BOILER BLOWDOWN CONDUCTIVITY CONTROLLER (CONTINUOUS METHOD) INSTALLATION & OPERATION MANUAL SERIAL #: Lakewood Instruments 7838 North Faulkner Road, Milwaukee, WI
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationAGV5-1, AGV5-2 FORM AGV5 OM 11-02
ALTRONIC GAS FUEL VALVE OPERATING MANUAL AGV5-1, AGV5-2 FORM AGV5 OM 11-02 WARNING: DEVIATION FROM THESE INSTALLATION INSTRUCTIONS MAY LEAD TO IMPROPER ENGINE OPERATION WHICH COULD CAUSE PERSONAL INJURY
More informationGE Measurement & Control
GE Measurement & Control Telaire Ventostat 8000 Series CO 2 Sensor User Instructions Installing the Sensor!WARNING! Before performing service or maintenance operations on the systems, turn OFF main power
More informationBASIC IN-LINE LIQUID FLOW RATE MONITORS. Data Sheet No. B-699. Select from aluminum, brass or stainless steel to meet system and liquid requirements.
BASIC Data Sheet No. B-699 IN-LINE LIQUID FLOW RATE MONITORS CHOICE OF THREE MATERIALS OF CONSTRUCTION Select from aluminum, brass or stainless steel to meet system and liquid requirements. UNRESTRICTED
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 26 13 13 MEDIUM VOLTAGE SWITCHGEAR PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More informationFigure 1: WPR2 Dimensions and Hardware
Installation and Operation Instructions WPR2 Series (Max. Line Pressure < 300 PSI) Wet to Wet Differential Pressure Ø0.200" 2.60" 4.47" 5.47" 5.28" 3.00" Precautions Figure 1: WPR2 Dimensions and Hardware
More informationFIELD DEVICES - FLOW PSS 1-6F9 A. Product Specifications
FIELD DEVICES - FLOW Product Specifications Logo 9100A Series Magnetic Flowtubes with Ebonite Liners 1 to 78 in (25 to 2000 mm) Nominal Flowtube Sizes The Foxboro brand 9100A Series Magnetic Flowtube together
More informationMEMFlo MFTV METAL BODIED FLOW METER WITH CLEAR TOP
MEMFlo MFTV METAL BODIED FLOW METER WITH CLEAR TOP DESCRIPTION The MEMFlo MFTV Metal Bodied Flow Meters with Clear Top are simple, accurate, meters for use in a wide range of industrial liquid and gas
More information4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
More informationDW PADDLE-BELLOWS FLOWMETER & SWITCH
DW PADDLE-BELLOWS FLOWMETER & SWITCH Flow Pressure Level Temperature measurement monitoring control Accuracy: ±% Full Scale Excellent for Highly Contaminated Media Orientation Independent Brass or Stainless
More informationFisher 546 Electro Pneumatic Transducer
546 Transducer Product Bulletin Fisher 546 Electro Pneumatic Transducer Fisher 546 transducers receive a direct current input signal and use a torque motor, nozzle flapper, and pneumatic relay to convert
More informationFAIRCHILD T8001 SERIES STANDARD RANGE MINIATURE TWO-WIRE, P/I PRESSURE TRANSDUCER. Installation, Operation and Maintenance Instructions
FAIRCHILD T800 SERIES STANDARD RANGE MINIATURE TWO-WIRE, PI PRESSURE TRANSDUCER Installation, Operation and Maintenance Instructions Model TT800 Model TA800 Model TD800 Inlet Port (Channel 2) Inlet Port
More informationDW PADDLE-BELLOWS FLOWMETER & SWITCH
DW PADDLE-BELLOWS FLOWMETER & SWITCH Flow Pressure Level Temperature measurement monitoring control S3 Accuracy: ±3% Full Scale Excellent for Highly Contaminated Media Orientation Independent Brass or
More informationLIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX )
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX ) Publication# 03revA Table of Contents Publication# 03revA Table Of Contents...
More informationEX80 Series EX81 EX82. E X 8 0 S E R I E S E l e c t r o m a g n e t i C F l o w s e n s o r i n s t r u c t i o n s. The Leader in Flow Meter Value.
E X S E R I E S E l e c t r o m a g n e t i C F l o w s e n s o r i n s t r u c t i o n s EX Series Electromagnetic FLOW SENSOR instructions EX EX The Leader in Flow Meter Value. Table of Contents General
More informationCreative Engineers Inc. Pittsburgh, PA York, PA Phoenix, MD P.O. Box 206 Phoenix, MD Phone (443)
Creative Engineers Inc. Pittsburgh, PA York, PA Phoenix, MD P.O. Box 206 Phoenix, MD 21131 Phone (443) 807-1202 info@creativeengineers.com www.creativeengineers.com MAGNETIC FLOWMETERS Creative Engineers
More informationDIVISION 14 CONVEYING EQUIPMENT
DIVISION 14 CONVEYING EQUIPMENT Page 1 of 4 Part 1 General 1.1 SCOPE OF WORK.1 Supply and install one (1) complete overhead (push trolley electric chain hoist) under running monorail crane systems as mentioned
More informationSECTION SWING CHECK VALVES
PART 1 GENERAL 1.1 DESCRIPTION This section includes materials, testing, and installation of swing check valves as shown in the Drawings and specified herein, in accordance with the requirements of the
More informationSITRANS AS 100. Instruction Manual September 2001 ITRANS AS 100
SITRANS AS 100 Instruction Manual September 2001 ITRANS AS 100 Safety Guidelines Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the
More information