(800) M-F

Transcription

1 LED Lighting 41 LED Step Lamps Stylish, compact and power saving lamps are ideal for interior or exterior use. Completely sealed & ultradurable. Features: 30 down angle light. Polished 316 stainless steel cap. LED light source. Stainless steel screws included. Pre-wired with 120mm of marine cable - 0.5W power use. Colors: Blue, Red, White, Green. HEL Step Lamp LED Blue SS 10-33V HEL Step Lamp LED Red SS 10-33V HEL Step Lamp LED White SS 10-33V HEL Step Lamp LED Green SS 10-33V LED Low Profile Courtesy Light Easy fit lights are compact energy savers. Interior or exterior uses. Light radiates downward at a 30 angle. Quick & easy installation. Lamps are ideal for illuminating onboard areas: steps, stairs, storage, signs, switches, etc. For 12V or 254V DC systems. Single hole mounting. Colors: Blue, Red, White, Amber. HEL Courtesy Light LED White/White HEL Courtesy Light LED Blue/Chrome HEL Courtesy Light LED Blue/White HEL Courtesy Light LED Red/White HEL Courtesy Light LED Red/Black HEL Courtesy Light LED Amber/Gold LED Slimline Light - 12V DC Waterproof courtesy light. Energy efficient, low power use. Ultra long service life. Completely sealed, no maintenance. Smooth & even light patterns. Shock & vibration resistant. Colors: Amber, Blue, Red, White, Green. HEL Light Slimline LED Amber/Gold HEL Light Slimline LED Blue/White HEL Light Slimline LED Red/White HEL Light Slimline LED Green/Black HEL Light Slimline LED White/Chrome HEL Light Slimline LED Green/Chrome HEL Light Slimline LED Blue/Chrome HEL Light Slimline LED Amber/Chrome Nassau Courtesy Light LED light - diverse uses - plastic. Housing dimensions: 1.44" x 0.69" x 0.44". 12 volt - 1amp - colors: red, amber, white. AQS Nassau Light LED 12V Wht 2/Pk AQS Nassau Light LED 12V Red 2/Pk Bimini Courtesy Light LED light - diverse uses - plastic - 0.8Amp. Switch - tube mount. Housing & diffuser dimensions: 4" x 1.06" x 1.06". AQS Bimini Light with Switch LED Euro Touch - Interior Light Breakthrough dual color LED lamp with touch sensitive switching. Touch pads for red or white light. Power saving & ultra durable. Features: Remote operated from multiple points. Light memory circuitry. Touch sensitive switching & dimming. Red light for night vision. Advanced optic eye protection. Waterproof, shock & vibration resistant. Multivolt 9-33V DC. Color: White. HEL Euro LED Touch Interior White LED Courtesy Light Stamped 304 stainless mounting plate - clear lens. 3 bright LEDs draw very low amps and have a long life. Overall length: 3-15/16" width: 7/8". Display packed. SDG Courtesy Light LED Clear

2 42 LED Lights and Interior Lighting LED Light 12 volt DC fits 3/16" diameter hole. Sidelight White - LED White epoxy coated bronze. 12 volt. Certified: power driven vessels under 65.6 ft length. Vertical mount - low profile - small size. Color SDG Red SDG Green PRK602DP1WHT..Sidelight White Led 12V PRK602DP1CHR..Sidelight Chrome Led 12V Bulkhead Light Fixture Systems up to 50 volts. Bulb not included. Size #1 has double contact bayonet socket. Accommodates bulbs to 32 candlepower. Size #2 has medium screw socket: Accommodate bulbs up to 40 watts. Molded plastic black or white. Dim.Wall Plate Projection PRK BLK..4-1/2" x 3-1/4"...4-3/8" PRK BLK..4-1/2" x 3-1/4"...5" PRK WHT.4-1/2" x 3-1/4"...4-3/8" PRK WHT.4-1/2" x 3-1/4"...5" Small Berth Light Lacquer coated polished brass body. Solid brass knurled adjusting knobs. Interior surface of lamp shade is white enamel. 15 watt DC double contact bulb. Display packed. Base Dia. Finish SDG /2"...Brass LED Dome Lights Stamped 304 stainless steel. 2 sizes see below. Dimensions: Ring dia: 5-1/2" - Glass dome width: 4" - Depth: 2". SDG Light Dome SS LED 4 Lens Dimensions: Ring dia: 6-3/4" - Glass dome width: 5" - Depth: 2-1/8". SDG Light Dome SS LED 5 Lens Bulkhead Light Fixture Systems up to 50 volts. Bulb not included. Medium screw socket with turn switch. Has a power take-off receptacle. Chrome plated zinc. Base Size Projection PRK217DP...2-1/2" x 1-3/4"...2-5/8" Surface Mount Dome Light Double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Chrome plated zinc. O.D. Globe O.D. Flange PRK300DP0...3"...3-3/4" PRK300DP1...4"...5" PRK300DP2...5"...6" Large Berth Light Polished brass body. Solid brass knurled adjusting knobs. Interior surface of lamp shade is white enamel. Prewired with On/Off switch. Display packed. 12 volt, 15 watt DC screw in bulb. Base Dia. Finish SDG /2"...Brass SDG /2"...Chrome

3 Interior Lighting Fixtures 43 Perko Exterior Dome Light Double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Ivory "Perko-Kote" powder coating. Black vinyl mounting gasket. O.D. Globe O.D. Flange PRK1253DP1...4"...5" PRK1253DP2...5"...6" Day/Night Dome Light Stainless steel, prewired with On/Off/On switch. 2 separate light circuits. Both light circuits equipped with 12 volt bulbs. 15 watt DC double contact bayonet bulbs. 1 circuit uses clear bulb, other circuit uses red bulb. Lens Dia. O.D. Watts SDG "...6-3/4"...15 Surface Mount Light Dual voltage, for 12 or 120 volts. Double contact bayonet sockets. Complete with two 12 volt & two 120 volt bulbs. White translucent plastic globe. White 'Perko-Kote' cast zinc base with integral junction box. Length Width Depth PRK318DP...9-3/4"...3-1/2"...1-7/8" Dome Light Stamped 304 stainless steel. Display pack. Lens Dia. Base SDG "...4 3/8" SDG "...5 1/2" SDG "...6 3/4" Day/Night Dome Light Polished stainless housing with On/Off/On switch. 2 light circuits: 1st operates red bulb, 2nd operates clear bulb. Display pack. Lens Dia. Base SDG "...6-3/4" Dome Light Round, surface mount light is a chrome plated zinc alloy. White translucent plastic globe. Push switch with water resistant switch. 12 volt, 10 watt bulb included - 3-3/4" Dia. PRK1258DP2CHR...Dome Light with Zinc Switch Dome Light Stamped 304 stainless steel. Polished housing & trim ring. Solid glass lens. No built-in on/off switch. Overall dia: 6-3/4" - globe dia: 5" - depth: 2-1/8". SDG Light Dome SS 5 Lens No Swtch Stainless Steel Dome Light Stamped polished stainless steel housing. Trim ring & a solid glass lens. Each light prewired with On/Off switch. Lens Dia. O.D. Watts SDG "...4-3/8"...10 SDG "...5-1/2"...15 SDG "...6-3/4"...15 Dome Light Stainless steel & glass. Display packed. Bulb included: 18 watt, 12 volt. Lens Overall Dia. Dia Type SDG Light Dome SS /16".Regular SDG Light Dome SS /2"...Regular SDG Light Dome SS /2"...Day/Night Interior Round Lamp Lens rotates to switch lamp on/off. Remote switch operation also. Clear lens - plastic housing - surface mounting. 3 flat plug connectors 6.3 mm. Max output: 15W. Bulb: 10W or 15W sv8.5 (not included). Recessed/Surface Downlight Dome shape with red diffuser lens. Light source: conventional. Volt: 12V/24V - Watt: 10W. HEL Lamp Interior Rnd AQS Dome Light with Red Diffuser Lens Polished Brass Dome Light Lacquer coated polished brass body. Trim ring and a solid glass lens. Prewired with On/Off toggle switch, 12 volt. 15 watt DC double contact bayonet bulb. Lens Dia. O.D. Watts SDG "...5-1/2"...15 SDG "...6-3/4"...15 Aqua Signal Fluorescent Light Small compact design measures 16" overall and 1.65" wide. Housing: zinc coated steel sheet, aluminum cover. Black plastic end caps. 8W bulb included. Old # AQS Fluorescent Light AQS W/12V bulb

4 44 Interior Lighting Fixtures Interior Fluorescent Light Stainless steel housing - color: brass deko. Brass trim. Volt: 12, Watt: 8. AQS Light Int Fluor Brass Rim 12V Chart Table Light Intensity control/on/off switch. Fixed wall slide in brackets. Black plastic: shock/seawater resist, non-magnetic/corrosive. Diffuser: polycarbonate. 2 wire - 12 volt - 5 watt - halide. Dimensions: To Wall 3.7" L x 3.5" H, 2.2" Diameter. AQS Chart Light 12V/5W Hal Fixed Fixed Utility Lights Complete with 12 volt, 1 watt bulb. PRK137DPBLK...Shielded Utility Light, Black PRK140DP...Diffused Utility Light, White Fixed Utility Light Complete with 12 volt, 3 watt bulb. White molded plastic. Easily installed by cutting a 1-3/4" diameter hole. 7" wire lead. Color Dimension PRK1044DP White 2-1/4" x 2-1/4" Adjustable Utility Light Shield swivels to change position. Complete with 12 volt, 6 candle power bulb. Chrome plated zinc. O.D. Overall PRK1254DP...2-5/8" Halogen Swivel Lamp Powder coated aluminum white. Wired with rocker switch. Display packed. MR volt - 10 watt DC halogen bulb. Length: 4-3/4" - base height: 2-7/16" - shade dia: 2-1/2". Overall height with shade raised: 3-3/4". SDG Light Halogen Swivel 12V Chart Table Light Intensity control/on/off switch - pigtail - 2 slide-in wall brackets. Black plastic: shock/seawater resist, non-magnetic/non-corrosive. Diffuser: polycarbonate. - 2 wire - 12 volt - 5 watt - halide. Dimensions: To Wall 3.7" L x 3.5" W. Diameter: 2.2". AQS Chart Light 12V/5W Hal Halogen Chart Light - Large Head Cast brass, high polish finish. Reading or chart work. Flexible neck, with 2" reflector & clear glass lens. Includes a 10 watt 12 volt MR-16 halogen bulb. Dimensions: Base length: 2-3/16" - Base width: 11/16". Arm length: 10-11/16". Head length: 2-1/2" - Head width: 2". SDG Light Chart Halogen Brass DP Portofino Courtesy Light Berth reading lamp for ambiance & functionality. On/off switch, black plastic housing. Polycarbonate diffuser. Bulb: 12V, 5W halogen. Dimensions: 3.4" L x 2.5" W. AQS Cabin Light Series 15 Berth Light Black plastic, modern design. Display packed. Built in LED. Aids in locating switch. Length: 3-9/16" - Base height: 2-1/2" - Shade dia: 2-3/8". Overall height with shade raised: 4-3/16". SDG Light Bunk Black Plastic

5 Navigation Lights For Vessels Up To 164 Feet 45 Vessels from 65.6 feet to 164 feet (20 meters to 50 meters) Aqua Signal 55 Series Commercial Navigation Lights Vessels from 65.6' to 164' in length. All waters (National/International according to IMO 1972). Housing constructed of polycarbonate, fiberglass reinforced. Other components of non-corrosive materials. Non-magnetic, seawater resistant. Bulb not included. Old# AQS Starboard Green AQS Port Red AQS Masthead AQS Stern Wht/Smk AQS Stern Yellow AQS All Around White AQS V/25W bulb AQS V/25W bulb AQS V/25W bulb AQS All Around Green AQS All Around Red PRK1127 PRK1129 PRK1128 PRK1130 Single Lens Navigation Lights Use on vessels over 65.6' in length. Cast bronze. Complete with pre-wired medium prefocus socket. 3' of 16/3-SO cable thru watertight terminal tube. Watertight access cap for rebuilding/cleaning. Light bulb not included. 9-1/4" overall height. PRK1172RE0PLB...Red Side Light PRK1173E00PLB...White Masthead Light PRK1174E00PLB...White Stern Light PRK1169E00PLB...White All Around Light PRK1170RE0PLB...Red All Around Light PRK342004CLR Volt Bulb PRK342RS4CLR...RS 120 Volt Bulb PRK1172GEOPLB...Green Side Light PRK1174MEOPLB...Yellow Towing Light PRK1170GEOPLB...Green All Around Light PRK1170MEOPLB...Yellow All Around Light Navigation Lights Black plastic. Vessels from 65.6' to 164' in length. Complete with pre-wired double contact socket. 3' of 16/3 - SJO cable for 12, 24, 32, or 120 volts. Watertight access cap for rebuilding/cleaning. Bulb not included - overall height 7-1/2". PRK1127RA0BLK...Red Side Light PRK1127GA0BLK...Green Side Light PRK1128A00BLK...White Masthead Light PRK1129A00BLK...White Stern Light PRK1129MA0BLK...Yellow Towing Light PRK1130A00BLK...White All Around Light PRK1130RA0BLK...Red All Around Light PRK1130GA0BLK...Green All Around Light PRK1130MA0BLK...Yellow All Around Light PRK374001CLR...12V Bulb PRK374002CLR...24V Bulb PRK374003CLR...32V Bulb PRK374004CLR...120V Bulb

6 46 Navigation Lights Aqua Signal 70 Series Deck Mounted - Commercial Navigation Lights For all vessels 65.6' in length & over. All waters (National/International according to IMO 1972). Housing has a self ventilated float controlled drain valve. Non-magnetic, seawater resistant, bulb not included. Old # AQS Masthead AQS V/40W Bulb AQS V/60W Bulb AQS White All Around Light AQS Green All Around Light AQS Red All Around Light AQS Green Stbd Light AQS Red Port Light AQS White Stern Light AQS Yellow Stern Light Up to 65.6 feet (20 meters) 40 Series Navigation Lights Use on all vessels less than 65.6 feet in length. Modular components. Cable entry - underside/bulb change without tools. Housing is molded of glass reinforced polycarbonate. Screens are brushed stainless steel. 12 volt bulb included. Complies with international regulations IMO Old # AQS Starboard 25W AQS Port 25W AQS Masthead 25W AQS Stern 10W AQS All Around White - Deck mount 10W AQS All Around Red - Deck mount 25W AQS All Around Green - Deck mount 25W AQS V/25W Bulb AQS V/10W Bulb Double Lens Navigation Lights Use on vessels over 20 meters (65.6') in length. Cast bronze. Each section has a pre-wired medium prefocus bulb socket. 3 feet of 16/3-SO cable thru a watertight terminal tube. Watertight access cap for rebuilding/cleaning. Light bulbs not included. Overall height 17-1/4". PRK1164GE0PLB...Green Side Light PRK1165E00PLB...White Masthead Light PRK1166E00PLB...Stern Light PRK1167E00PLB...White All Around Light PRK342004CLR Volt Bulb PRK1164RE0PLB...Red Side Light Aqua Signal 41 Series Navigation Lights For vessels up to 65.6' in length, all waters (National & International according to IMO 1972). Built to withstand harsh conditions. Fiberglass reinforced polycarbonate, impact resist housing. Fade free acrylic lenses, 12 volt bulb included. Old# AQS Starboard 25W AQS Port 25W AQS Bi-Color 25W AQS Masthead 25W AQS Stern 10W AQS V/25W Bulb AQS V/10W Bulb AQS V/25W Bulb Perko Navigation Lights Vessels over 20 meters (65.6') in length. Galvanized sheet metal. Complete with medium prefocus socket. Watertight terminal tube for 16/3-SO cable. Watertight access cap for rebuilding/cleaning. 120 volt bulb not included. Overall heights: #1-11-1/2", #2-13-1/2". PRK1150RE2GAL...Red Side Light PRK1150GE2GAL...Green Side Light Hella #2984 Navigation Lights Compact lights with modern styling. For vessels up to 65.6' in length, Anti-magnetic/seawater proof. Positive ventilation. Snap type housing catch without screws. Hanging bulb/contacts in upper area prevents electrolysis at connections. Black housing. HEL62206 Masthead Light HEL Bi-Color Light HEL Stern Light HEL Red Side Light HEL Green Side Light HEL V/25W Bulb HEL V/10W Bulb for Stern Light

7 Navigation Lights Use on sail or power driven vessels up to 65.6' in length. Hella #2386 Navigation Lights Compact navigation lights with modern styling. Anti-magnetic and seawater-proof with positive ventilation. Snap type housing catch without screws. Black housing, 12 volt. Hanging bulb/contacts in upper area prevent electrolysis at connections. Hella #2984 Signal Lights Either permanent installation or as hoisting. 12 volt. Seawater-proof/anti-magnetic. Packing gland connection. Bayonet lock on lamp housing for easy bulb change. HEL Green Side Light HEL Red Side Light HEL Bi-Color Light HEL V/25W Bulb HEL V/10W Bulb for Stern Light HEL Anchor Light HEL Green Light HEL Red Light Navigation Lights Navigation Lights Galvanized sheet metal finish. Bottom opening, complete with mounting bracket. Single contact prefocus socket. Bulb not included. Overall height 8-1/2". Finish PRK5FO3GAL...White Masthead...Galvanized PRK7MF3GAL...Yellow Tow Light..Galvanized PRK70DP1...12V Bulbs (2 per bag) PRK70DP2...32V Bulbs (2 per bag) All Around Light Cast bronze, plain or chrome plated. Medium screw base type electrical socket (B series). For 12 or 32 volts. A-series use double contact #374 bulb (not included). B-series under 20 meters, A-series under 50 meters. Plain Cast Bronze 112 Color Height OD Base Pipe Size PRK112A00PLB...White...8-3/4"...3-1/8" PRK112RAPLB...Red...8-3/4"...3-1/8" PRK309B00PLB...White...6-1/2" /2" PRK309GB0PLB...Green...6-1/2" /2" PRK309RB0PLB...Red...6-1/2" /2" PRK309A00PLB...White...6-1/2" /2" PRK309GA0PLB...Green...6-1/2" /2" PRK309RA0PLB...Red...6-1/2" /2" Navigation Lights Base mount. Black plastic. Vessels up to 65.6' Stainless steel mounting bracket. 4-13/16" overall height. 3-5/16" projection. PRK200MBDP1...White Masthead Light All Around Lights Cast bronze, plain, or chrome plated. Double contact socket, complete with 12 volt bulb. Finish Height PRK362DPPLB...Plain Bronze...2-3/8" PRK362DPCHR...Chrome Bronze...2-3/8" PRK371DPPLB...Plain Bronze...1-5/8" Navigation Lights Cast zinc with gloss black powder coated zinc finish. For 12 or 32 volt systems - bulb not included. #108 overall height 6", all others overall height 5-1/4". Vessels up to 65.6' PRK108DPR...Red All Around Light PRK109DPR...Red Side Light PRK109DPG...Green Side Light PRK110DP...White Masthead Light PRK111DP...White Stern Light PRK70DP1...12V Bulbs (2 per bag) PRK70DP2...32V Bulbs (2 per bag) PRK67DP2...24V Bulbs (2 per bag) PRK108000BLK...White All Around Light PRK108DPG...Green All Around Light PRK111M...Yellow Towing Light Masthead All Around Light Vertical mount - All around white masthead light for use on sail or power driven vessels under 65.6' in length. Black plastic & chrome plated zinc alloy top. Chrome plated zinc alloy mounting base included. Waterproof cover for mounting base. Two 12V bulbs included. Base size: 3/4" x 2-1/4". Stow-a-way plug in type pole: anodized: 3/4" Dia. Vertical height: 12-1/2". PRK1124DP1CHR...Masthead All Around Light 12V

8 48 Navigation Lights Combination Masthead/All Around Lights 3 mile visibility, clear lens. Complete with two 12 volt bulbs. Black plastic & chrome plated zinc tops. Chrome plated zinc bases. Combination Mast/All Around Light Fold down, adjustable angle, vertical mount. Plastic adapter for flat or "V" type mount. Vessels up to 65.6' Combo Mast/All Around Light Combination masthead - white all around light. Fixed mount. Vessels up to 65.6' Height PRK1184DP /8" PRK71DP...Spare bulbs (2 per bag) Height PRK1196DP /4" PRK1183DPCHR...3-3/6" White All Around Light Use for power driven vessels under 65.6' length. 2 mile visibility, complete with 12 volt bulb. Black plastic tops, chrome plated zinc bases. 3/4" anodized aluminum tubes. White All Around Light White translucent globe, fold down adjustable angle. Horizontal or vertical mount. Plastic adapters for "V" or flat mount. Mount Height Base Dim. PRK CHR..Horiz /8"...2" x 1-1/2" White All Around Light Clear fresnel globe, fixed mount. Vessels up to 65.6' Height OD Base PRK455DP /2"...2-1/16" PRK455DP2...11"...2-1/16" Replacement Light Replacement stow-a-way plug in type, white all around light. 2 mile visibility, white translucent globe, black plastic top. Complete with 12 volt bulb. Vessels up to 65.6' 3/4" diameter anodized aluminum tube. Height PRK1400DP2...24" PRK1400DP3...30" White All Around Lights Use for power driven vessels under 65.6 ft. length. Stow-a-way plug-in type, 2 mile visibility. Complete with 12 volt bulb. 3/4" diameter anodized aluminum tubes. Waterproof cover for base. Perko #1330 White All Around Light Clear fresnel globe, black plastic top, chrome plated zinc base. Height PRK1330DP /2" PRK1330DP3CHR /4" PRK1330DP4CHR...33" White All Around Light White translucent globe, fixed mount. Vessels up to 65.6' Height Base Dim. PRK1301DP...7-1/8"...1" x 2-5/8" White All Around Lights Use for power driven vessels under 65.6' length. Telescoping type, 2 mile visibility. Complete with 12 volt bulb. 3/4" dia. anodized aluminum tubes. Perko #1311 White All Around Lights Clear fresnel globe - black plastic top. Chrome plated zinc base. Pole Storage Clips Soft rubber fits 3/4" diameter tubing. Height PRK1311DP2...24" PRK477DP...1 pair per bag

9 Navigation Lights 49 Yellow Towing Light Certified for power driven vessels under 65.6 ft mile visibility - black plastic body. 12V, 24V, or 32V. Height overall: 5-1/4" - lens height: 4-1/4". Meets USCG 2nm & 3nm & CE. PRK111M...Yellow Towing Light-Black Stern Light Stamped 304 stainless steel. Display pack Base SDG /16" SDG Repl. Lens Masthead Light Sail or power driven vessels - under 65.6 ft. Chrome plated zinc alloy top - black plastic base. 12 volt: bulb included. Height: 3-1/4" - base:1" x 2-5/8". Meets USCG 3 nm & CE. PRK1178DP...Masthead Light 12V Chrome/Blk Masthead Light Sail or power driven vessels under 65.6 ft. White all around light, fixed mount. 12 volt: bulb included. Black plastic & chrome plated zinc alloy top. 3/4" dia. anodized aluminum tube. Meets USCG 3 nm & CE. PRK1183DPCHR...Light Masthead/All Around 12V Masthead Light - Vertical Mount Sail or power driven vessels under 65.6 ft. Chrome plated zinc alloy and black plastic base. 12 volt bulb included. Width: 1-1/2" - length: 3-1/4". Meets USCG 3 nm & CE. PRK1331DPCHR...Light Masthead Vert Mount Pole Light Power vessels under 65.6 ft. length. Reduce glare globe preserves night vision. Adjustable head 40. Horizontal alignment for base. 12 volt bulb included, pole dia: 3/4". 2 globes - threaded & locking. 2 collars - gold plated contacts. PRK1470DP4...36" Pole Light Chrome Bi-Color Light Certified for power driven vessels under 39.4 ft. Red & green lens - 12 volt: bulb included. Chrome plated bronze top - black plastic base. Height: 1" - width: 3-1/8" - length: 4". Meets USCG 1 nm & CE. PRK1161DPCHR...Bi-Color Light 12V Masthead Light Stamped 304 stainless steel. Base SDG /16" SDG Repl. Lens Combo Bow Light Die cast chromed zinc. Display pack. Width Depth SDG /16"...2-7/8" Side Lights Side mount, stamped 304 stainless steel. Port and starboard. Pair. Base SDG /16" Side Light Stamped 304 stainless steel. Port and starboard. Pair. Width Length SDG /16"...4" Flush Side Light Flush mount. 304 stainless steel. Port and starboard. Pair. Length SDG /4" SDG /4" Display Pack Bow / Masthead Light Stamped 304 stainless steel. Display pack Base SDG /16" SDG Repl. Lens

10 50 Navigation Lights Side Lights Use for power driven vessels under 12 meters (39.4' in length). 1 mile visibility. Red & green lenses. Complete with 12 volt bulbs. Side Lights Chrome plated brass tops with black plastic base. Horizontal surface mount. Vessels up 39.4' Dimensions: 4-1/4" x 2-3/8" x 7/8". PRK915DP...Side Lights - Pair PRK71DP...Spare Bulbs (2 per bag) Stern Lights 2 mile visibility. Clear lens, complete with 12 volt bulb. Perko Stern Lights Chrome plated brass top with black plastic base. Dimensions: 2-3/8" x 1-5/8". Vessels up 39.4' PRK945DP...Vertical Surface Mount PRK965DP...Horizontal Surface Mount PRK71DP...Spare Bulbs (2 per bag) #955 Side Light Chrome plated brass tops with black plastic base. Vertical surface mount. Vessels up 39.4' Complete with 12 volt bulbs. Dimensions: 4-1/4" x 2-3/8" x 1-5/8". PRK955DP...Side Lights - Pair PRK955G00CHR...Green Side Light PRK955R00CHR...Red Side Light PRK71DP...Spare Bulbs (2 per bag) Side Light Chrome plated brass tops with black plastic base. Horizontal surface mount. Vessels up 39.4' 1 mile visibility, red & green lenses. Dimensions: 2-3/8" x 7/8". Stock# PRK963DP...Side Light, Pair PRK71DP...Spare Bulbs (2 per bag) Surface Mount Side Light Chrome plated zinc with black vinyl mounting gasket. Vertical surface mount. Vessels up 39.4' 1 mile visibility. Red and green lenses. Dimensions: 5-1/2" x 3-1/8" x 1-3/4". PRK1264DP...Side Lights - Pair PRK71DP...Spare Bulbs (2 per bag) Stern Light Chrome plated brass with black plastic base. Vertical flush mount. Vessels up 65.6' Dimensions: 3" x 1-3/4". PRK946DP1-12V..12V Stern Light - Vertical Mount PRK70DP0...Spare 12V Bulbs - 2 per/bag PRK70DP2...Spare 32V Bulbs - 2 per/bag Masthead Lights Use on vessels under 12 meters (39.4') in length. Clear lens, complete with 12 volt bulb. Masthead Light Chrome plated brass top with black plastic base. Horizontal surface mount. 2 mile visibility. Dimension: 2-3/8" x 7/8". Bi-Color Light Chrome plated brass top with black plastic base. Dimensions: 4-1/4" x 2-1/8" x 7/8". PRK964DP...Masthead Light PRK71DP`...Spare 12V Bulb 2/bag PRK904DP...Bi-Color Light PRK71DP...Spare Bulbs (2 per bag) BI-COLOR LIGHTS Use on power driven vessels under 12 meters in length. Chrome plated bronze or chrome plated zinc tops. Black plastic bases.vessels up 39.4' 1 mile visibility. Red & green lens. Complete with 12 volt bulb. Bi-Color Light Chrome plated zinc. Dimensions base: 4" x 3-1/8" x 1". PRK1310DP...Bi-Color Light PRK71DP...Spare Bulbs (2 per bag) Bow Bi-Color Light Chrome plated brass top with black plastic base. Dimensions: 2-3/8" x 7/8". Vessels up 39.4' PRK972DP...Bi-Color Light PRK71DP...Spare Bulbs (2 per bag) Perko #120 Series Navigation Lights Black plastic. Complete with 12 volt bulb. PRK120BPDP1...Red Side Light PRK120BSDDP1...Green Side Light PRK69DP...Spare Bulbs

11 Navigation Lights For Vessels Less Than 39 Feet 51 Aqua Signal 20 Series Navigation Lights Housing Deck and side mounts made of rigid saltwater resistant polycarbonate. Mounting Deck/side mounts have self adhesive gasket used as drilling template. Old Number AQS Bicolor AQS Starboard AQS Port AQS Masthead AQS Stern - Deck Mount AQS Stern - Bulkhead Mount AQS All Around Pedestal 4" AQS All Around Pedestal 8" AQS All Around Fold-down 14" AQS All Around Fold-down 18" AQS All Around Plug-in 42" AQS All Around Plug-in 48" AQS V/5W Halogen Bulb AQS AQS AQS AQS AQS Series Navigation Lights For vessels less than 39' in length in all waters (national & international according to IMO 1972). Housing: rigid polycarbonate, screens of stainless steel. Non-magnetic, seawater resistant. 12 volt. Dimensions: 2.95" H, 2.51" W, 2.28" D. 12 volt bulb included. Old # AQS Starboard 10W AQS Port 10W AQS Bicolor 10W AQS Masthead 10W AQS Stern 10W AQS All Around White 10W AQS V/10W Festoon Bulb AQS AQS Hella #3562 Navigation Lights Compact navigation lights - direct attachment. Seawater-proof & anti-magnetic. Vessels up 39.4' Snap lock housing bulbs can be changed without tools. Fitted with 12V/10W tubular bulb - black housing. Dimensions: 3" H, 2.5" W, 2.06" D. HEL Masthead Light HEL Stern Light HEL Green Side Light HEL Red Side Light HEL Bi-Color Light HEL V/10W Bulb HEL V/10W Bulb for Anchor Light Navi LED Pro Port Ultra durable, power saving LED navigation lamps for enhanced safety. Vessels up 39.4' Features: UV resistant, enhanced impact resistant acrylic lens. High impact shroud. Multiple LED light source. Minimum visible distance is 2 nautical miles. Pre-wired with 2.5m of marine cable. Multivolt 9-33V DC is completely sealed. HEL Navi LED Pro Masthead 9-33V 3NM HEL Navi LED Pro Port 9-33V 2NM HEL Navi LED Pro Port 9-33V 3NM HEL Navi LED Pro Starboard 9-33V 2NM HEL Navi LED Pro Starboard 9-33V 3NM HEL Navi LED Pro Stern 9-33V 2NM HEL Navi LED Pro Stern 9-33V 3NM

12 52 Navigation Lights For Dinghies / Bulbs and Sockets 2 Cell All Around Sternlights Operates on 2, D cell batteries. FTN48PSK...C-Clamp Mount FTN49PPSK...Stern Light FTN50PSK...Suction Cup Mount FTN54PSK...Inflatable Boat Stern Light FTN50PSK FTN48PSK FTN49PPSK Fold-Down Navigation Light - Aquasignal All around light for power boats. Non-corrosive, non-magnetic, seawater resistant. IP 45 protection. 14" polycarbonate shock resist with white housing. Visibility range: 2 nm - 12V - 5W bulb included. (Starboard & Port Bi-color 1nm.) AQS All Around Folding 14 White Battery Powered - Running Lights Marine tested to meet or exceed A-16 standards & to meet all requirements for Inland & International waters if properly placed on boat. 2 Cell Bowlights FTN43PSK...Bolt Down Mount FTN51PSK...Vertical C-Clamp Mount FTN52PSK...Horizontal C-Clamp Mount FTN53PSK...Suction Cup Mount FTN55PSK...Inflatable Boat Bow Light FTN43PSK FTN51PSK Portable Stern Light - Portable 23' boat maximum length. Increase visibility of small boat. All around white, stern, inflatable-mount. Housing black, watertight, bouyant. Optics are seawater resistant, including on/off switch. 4 x AA battery 1.5 volt (not included). Pole Light - Portable 23' boat max. All around white, stern, pole 24". C-clamp mount. Housing black, watertight, buoyant. Optics are seawater resistant, including on/off switch. 4 x AA battery 1.5 volt (not included). AQS Portable Stern Inflatable AQS Portable Stern C-Clamp AQS Portable Bow C-Clamp AQS Portable LED Bow C-Clamp FTN52PSK FTN55PSK Suction Cup Bow Light - Portable 23' boats max, increase visibility of small boats. Bi-color, bow, suction cup mount. Housing black, watertight, buoyant. Optics are seawater resistant, including on/off switch. 4 x AA battery 1.5 volt (not included). AQS Portable Bow Light FTN53PSK

13 Navigation Lights & Searchlights 53 All Around - Anchor Lamp Compact design - 2 mile lamp. Saltwater resistant, non-magnetic. Vessel up to 39.4' Plastic base/housing/lens is UV/impact resistant. Heavy duty anodized aluminum poles. 12 volt - 10 watt sv 8.5 bulb. Pre-wired mm of cable - SS screws. Approvals: IMO-COLREG-USCG-ABYC A RINA(1.) Overall length 24" - protection IP X6. HEL Anchor Light Blk 24 White All Around Anchor Lamp 2 nautical mile, saltwater proof, non-magnetic. Internationally approved single unit. Vessel up to 39.4'. Install direct: horizontal surface or pole with plug-in base. UV resistant housing/lens protection IP54. Bulb: 12V 10W BA 15s included. Meets: IMO COLREG / USCG / ABYC A-16 / RINA. Telescoping Pole Light Chrome plated zinc alloy base. Vessel up to 39.4' White translucent globe with black plastic top. Locking collar on pole, mounting base included. Total height 24". HEL Lamp Anchor PRK1611DP2CHR...Pole Light 24 All Around Morse Docking Lights Flush mount units become integral part of hull for general illumination below deckline. Easy to install, lights fit neatly in bow. Intermittent use to spot obstacles, buoys, docks. Offers beam placement up/down, individually/together. On/Off switch for bulbs operating separately. MOR V MOR V Replacement Bulb Jabsco 135 SL Remote Control Searchlight Tough weather/corrosion resistant. White thermoplastic. Remote control. Sealed beam halogen bulb/dusk-to-dawn piercing light: 320 rotation & 75 vertical sweep. Integrally molded clutch allows light operated against limit stops without damage. Black control for instrument panel. Fitted with fused On/Off switch. 8-way directional switch for precise beam control. Complete with 15' cable. Mounting fittings are stainless steel. DC Watt Amps Candle Volts Power JAB ,000 Masthead Light All Around white masthead light for use on power driven vessels. Vessel up to 39.4' Reduced glare design. Black plastic top & base. Anodized aluminum tube 3/4". Fixed mount. 12V bulb included. Base size: 1" x 2-5/8". Vertical height: 2-1/4" - Pole: anodized: 3/4" Dia. PRK1283DP0BLK...Light Masthead All Around Jabsco 255 SL Remote Control Searchlight Night piercing dual halogen sealed beam lamps. Epoxy painted heavy duty thermoset plastic housing extremely weatherproof/corrosion resistant. Same 'bulb only' movement as smaller 135 SL searchlight. Has 60 vertical sweep & full 360 horizontal rotation. Volts Amps Candlepower JAB V ,000 JAB V Dual Station Control Kit

14 54 Searchlights Watertight Searchlight Finger tip control. 1 Lux at 885 ft - 10,000 candlepower. Watertight 5" halogen sealed beam. Full 320 horizontal rotation, 75 vertical sweep. Joystick remote control - 12 volt DC. Electronic control: 20 sweep - 2 speeds. 15' of cable with optional extension cable. Tough thermoplastic housing/base. JAB Searchlight 12V 155SL Jabsco 5" Spotlight Zinc base & polished chrome finish. For areas where corrosion is not a concern. Light models include: Watertight control and separate 8' wiring cable with plug connectors on each end. Dual station control kit no is optional. Additional cable assembly may be required for installation of secondary control. Sock # Dia. Height Volts AMPS Candle Pwr. Spot/Flood JAB "...7-1/8" ,000/50,000 Accessories JAB V dual station control kit JAB ' wiring cable assembly JAB ' wiring cable assembly JAB ' wiring cable assembly 5" (62026) & 7" (62040) Spotlights Attractive, effective light source; long reliable service. Solid brass with polished chrome finish. Handles severe marine conditions. Completely motorized drive unit, enclosed in housing. Clutch-A-Matic protects drive unit from overload. Operates: extended periods against limit stops without harm. Watertight control with joystick control lever: 450 horizontal sweep, 65 vertical motion. Dual speed switch precise beam control with On/Off switch for spot light & flood beam. Dia. Height Volts AMPS Candle Pwr. Spot/Flood JAB "...9-1/8" ,000/50,000 JAB "... 13" ,000/50,000 RC Spot/Flood Searchlight Brilliant light with digital multi-function processor control. 1 Lux at 1380' - 200,000/50,000 candlepower spot/flood. Watertight halogen sealed beam - 12V DC. Full 360 horizontal rotation, 70 vertical sweep. Water resist touch pad remote control, joystick option. Auto: 20 sweep - 2 speeds. Emergency auto: SOS 360 distress signal. 15' of cable with optional extension cable. Durable chrome or brass housing/base. Dimensions: 6" W x 11" L x 13" H. Optional 2nd remote control panel for dual helm stations. JAB Searchlight 6 Spot/Flood 12V Jabsco 146 SL Remote Control Searchlight Mid-size searchlight. Sleekly styled rugged. More on target light. Sealed beam halogen bulb 15 lux value - 175,000 candlepower. Dusk-to-dawn piercing light expands boaters recreational day. Marine tough housing, weather/corrosion resistant thermoplastic. Full 360 rotation, 60 vertical sweep. Voltage Amps Bulb # JAB V JAB V Secondary Control Remote Control Searchlight Dual lamp for redundancy/reliability. 12 volt, 180,000 candlepower, lamps rated 200 hrs. Point pad remote control, 1" stack rings increases height. Ocular design: 18 Up - 45 down pitch enhances visibility. Second station capable, adapter & 2nd point pad optional. 7-wire wiring harness 17 ft. length. Easy to install, flush or surface mount. Electronics protected in water resistant light head. ACR Searchlight 180,000 CD 12V

15 Searchlights 55 Pilot House Control - Search Light Chrome plated or white powder coated brass. Lever action controls movement both: Horizontal Vertical 70. Corrosion resistant, splash proof construction. 7 & 8 inch sealed beam units included. Tin plated electrical contacts & wiring. Ceiling thickness up to 5". HEAD WATT PRK314C0712V...Searchlight 12V Chrome PRK314C0812V...Searchlight 12V Chrome PRK314C0832V...Searchlight 32V Chrome 8" Opti Blue Eye Beam Spot Light Glare free. Has cigarette lighter plug. Corrosion resistant hardware - 400,000 candlepower. 12 volt/170 watt par 46 Blue Eye beam/sealed bulb. 10' white coil cord, push button enclosed switch. OPTKB Spotlight 400,000CP 12V Blue Searchlight - Lever Control Chrome plated bronze base. 7" sealed beam bulb included. Lever handle, horizontal & vertical. Control length: 7-1/2". Max ceiling thickness: 4-1/2". PRK V...Searchlight 7 Night Blaster QC-4000 Spotlight Inexpensive 12V handheld spotlight. 400,000 candlepower. Draws less than 11.7 amps. Cigarette lighter plug. 10 foot coiled cord. Replaceable bulb. OPTQC ,000CP Spot OPTBC Replacement Bulb Spotlight / Floodlight Kit 316 stainless steel base, 304 stainless steel head. Remote control, joystick operation. 1 year warranty. Joystick control requires 2-3/4 installation holes. Dual station option available. Directed manually without damaging motor. 15 wiring cable with easy to install plug ends. 6" spot power: 200,000CP. 6" flood power: 50,000CP 5" spot power: 72,000CP. 5" flood power: 30,000CP. GES22040A...Spotlight/Floodlight 5 12V SS GES Spotlight/Floodlight 6 12V SS 3/4 View Front View 1/2 View Opti Night Blaster Spot Light Quartz halogen, max beam power & distance. 12 volt - hand held - storage area for cord. 10' coil cord with cigarette lighter style plug. CandlePower Volt Watt OPTQH100...Spotlight 1,000,000CP 12V 55W OPTQH Spotlight 2,000,000CP 12V 100W Perko Fixed Spreader Light Complete with 12 volt, 6 candlepower bulb. Chrome plated bronze. O.D. Depth PRK265DP...2-3/4"...1-3/8" M-100 Remote Halogen Spotlight Corrosion proof, impact resistant UV stabilized ABS. 1 year warranty. Remote operation with joy stick control. Light can be directed manually without damaging motors. Easy to retrofit, same wiring & footprint as our 22040A spotlight. Joystick requires: 1.625" H x 2.75" L cutout. Specs: Spot power: 100,000 CP Amp draw: 4 Amps Operation: 12V Halogen Bulb: Replaceable sealed beam Base: 5" diameter Weight: 4.25 lb GES Spotlight M-100 Remote Halogen Perko Adjustable Spreader Light Complete with 12 volt sealed beam unit. Chrome plated brass. O.D. Depth Voltage PRK280DP...4-5/8"...2-1/2"...12 Adjustable Spreader Light Complete with 12 volt sealed beam unit. Molded black plastic body. Chrome plated brass mounting bracket. O.D. Depth Voltage PRK1040DP...4-1/2"...4-1/2"...12

16 56 Adjustable Spreader Light Stainless steel housing. Display pack. Prewired 12 volt 35 watt sealed beam bulb. Length Candlepower SDG /2" Spotlights / Floodlights Halogen Deck Light Free form lens reflector technology. 30% more light output than traditional parabolic reflectors. Chrome plated 316 stainless steel hardware. 12V, 55W halogen bulb. Overall dimensions: 5-1/2 W x 3-3/8 H x 3-3/4 D. BEPML005BWDSP...Black Deck Light BEPML005WWDSP...White Deck Light Fixed Spreader Light Stainless steel housing. Display pack. Prewired 12 volt 35 watt sealed beam bulb. Length Candlepower SDG /4" Transom Light Stamped 304 stainless steel. Display pack. Dimensions: OD Length: 5-1/8" - Height: 3-1/8". ID Length: 4-9/16" - Depth: 1". SDG Light Transom Rectangle SS DP Quartz Floodlight Rugged housing, heavy duty die-cast aluminum with deep ribs for max heat dissipation. Weatherproof silicone gasket seals at all critical points. Tempered lens is thermal/impact resistant. Aiming bars located on both sides of housing. 1/2" stem mounting arm complete with 180 aiming sector & repositioning stop. Average life for quartz lamp is 2,000 hours. JAB Aluminum Housing with Lens JAB DC Bulb Watt 4" x 6" Auxiliary Flood Light Universal deck flood light is marine corrosion resistant. Halogen bulb: H3, 55 watt replaceable (VH550). Wide angle flood beam lens, white polypro housing. Stainless steel mount hardware. Separate 10" lead & ground wires. ANDE513...Floodlight 12V 55W Halogen 4x6 Halogen Floodlight Housing: stainless steel, deep drawn, seamless. High polish aluminum reflector with safety glass. 1000W or 500W. Halogen light: L73 (not included). High heat resistant flexible silicon conductor. Adjustable bracket with 4 mounting holes. AQS Floodlight 500W 120V Halogen AQS Floodlight 1000W 120V Halogen AQS V 500W Halogen Bulb AQS V 10000W Halogen Bulb Halogen Floodlight - White Housing: stainless steel, deep drawn, seamless. High polish aluminum reflector with safety glass. 200 watt - halogen light: R7S (not included). High heat resistant flexible silicon conductor. Easily adapts to 12V, 24V, 110V, 220V. AQS Floodlight White 200W AQS V 200W Q. Halogen Bulb AQS V 200W Q. Halogen Bulb Tungsten Halogen Floodlight Totally weatherproof, made of high impact polypropyene. Tungsten halogen bulb candlepower. Average bulb life of 450 hours. Complete with stainless steel fittings. Mounting bracket fits wide variety of marine installations. Dimensions Volt Watt Amps JAB " x 6" JAB " x 6" JAB " x 5" JAB Replacement Bulb for Light JAB Replacement Bulb for Light JAB Replacement Bulb for Light Flood Light - Ultra Bright Trapezoidal beam pattern - mount above area. Blue light for visibility in low light - 12 volt. Sealed beam tungsten halogen bulb. Isolation/bracket mounted to withstand vibration. Black housing is 6" wide x 4" long. Stainless steel universal mount bracket. JAB Floodlight Ultra Bright 12V Flush Mount Floodlights Transom or bulkhead mounting. 12 VDC, 3.8 amps, 50 watts. JAB Flood Pattern Light JAB Trapezoidal Pattern Light JAB Trapezoidal Replacement Bulb JAB Flood Replacement Bulb

17 Floodlights and Trailer Lighting 57 Xenon Flood Light Delivers 4 times output of halogen lights. Lasts 5 times longer hour life. Compact size, completely sealed. 12 volt. Isolation bracket mounted to withstand vibration. Size: 7" H x 5" W x 6" L. Direct replacer of most add on incandescents/halogens. JAB Floodlight Xenon 5 12V Halogen Floodlight Fiberglass nylon case with stainless bracket. 55 watt halogen bulb. Bulk. Width SDG /16" SDG Repl. Bulb Halogen Flood Light Injection molded fiberglass nylon. Stamped stainless steel bracket. Marine grade flood light with solid glass lens. 55 watt halogen bulb. Length: 6-5/16" - height: 5-5/16" - depth: 3-3/16". SDG Light Flood Halogen with Bracket Waterproof "Over 80" Low Profile Trailer Light/Wire Kit Most reliable Waterproof design in industry. Sealed capsule protects bulbs against corrosion or thermoshock. Contains 2 waterproof over 80 tail lamps. 2 sealed amber side marker lamps. License plate bracket. 25 wishbone wiring harness. 4 trunk connector - hardware - install instructions. WES Trailer Light Kit Incandescent Utility Light White PBS with polypro lens guard. Versatile surface mount for decks/holds/engine rooms. 60 watt max (AC or DC) for low or line voltage. E26 socket med screw base - without bulb. Dimensions: 4.65" W x 5" L. IMTILIM Utility Light 60W PBS with Guard IMTIL4510E26...Utility Light 60W Alum with Guard IMTIL4520BI...Utility Light 100W PC with Guard IMTIL4520E26...Utility Light 100W Alum with Guard Rotary Light - Tow Truck Dependable revolving incandescent warning light. Flash rate: 85 FPM - polycarbonate lens. Permanent mount. Draws only 2.0 amps at 12 volts. Rugged die cast/spun aluminum base. Fullfills/exceeds SAE low temp operation specs J845. ISS20RI...Rotary Light 12V Tow Truck Red ISS20RIC...Rotary Light 12V Tow Truck Clr Waterproof Combo Clearance Light Side Light with Reflector Sonically sealed clearance with built in reflector protects from elements. Meets DOT-108 regs. for trailers 80" wide or more ("PC" rated). Wedge gives mount flexibility, also for trailers with 50 A-frame couplers. Dimensions: 4-3/4' L x 1-7/16" H x 1-1/4" D. WES Side Light Amber Surface Submersible Under 80 Tail Lamp & Wire Kits Bell Jar principle keeps water away from bulbs during launch & loading. 2 standard side marker lights in package for trailers under 80 wide. 2 submersible under 80 tail lamps/2 stud mount amber side marker lamps. License plate bracket - wishbone trailer wiring harness - 4 trunk connector. Hardware and installation instructions. WES Trailer Light Kit with 25 Harness, and SM...Lamps WES Tail Light Kit with 20 Harness, no SM Lamps WES Replacement Amber Lens for 3131 License Plate Brackets Plastic high impact, non-corrosive polypropylene. Zinc plated metal for more demanding use. WES Plastic WES Steel

18 58 Trailer Lighting Standard Combo Clearance / Marker Lamp Quick connect/disconnect wiring. Meets DOT-108 lighting standards (PC rated). Bulbs and lenses easily replaceable (standard auto #57 bulb). Waterproof Combo Clearance / Marker lamps Sonically sealed with break resistant polycarbonate lens. Stud mount or ear mount styles. Pre-installed 15 pigtail. Meets DOT-108 lighting standards ( PC rated). WES Amber, Stud Mount WES Lens Red WES Lens Amber WES Amber Waterproof, Stud WES Red Waterproof, Stud WES Amber Waterproof, Ear Standard Clearance / Marker Lamps with Reflector Either stud mount or ear mount with built in reflectors. Quick connect/disconnect wiring. Bulbs/lenses easily replaceable (standard auto #57 bulb). WES Amber Stud Mount WES Red Stud Mount WES Amber Ear Mount WES Red Ear Mount WES Lens Only for Submersible Under 80 Tail Lamp Ideal for boat & PWC trailers less than 80 wide. Gasketed lenses protect bulbs/contacts with Bell Jar principle when trailer is submerged in water. Trailer light prewired for easy installation. Bulbs/lenses, easily replaceable (standard #1157 and #194 bulbs). Stock# WES Tail Light Submers Left <80 WES Tail Light Submers Right <80 Submersible Over 80 Tail Lamp Ideal for boat & PWC trailers 80 wide or wider. Gasketed lenses protect bulbs & contacts with Bell Jar principle when trailer is submerged in water. Cost effectively meets all DOT-108 lighting regs. Bulbs/lenses easily replaceable (standard #1157 and #194 bulbs). WES Tail Light Submers Left >80 WES Tail Light Submers Right >80 Standard Under 80 Tail Lamp Designed for a variety of utility trailers. Bulbs/lenses are easily replaceable (uses standard #1157 and #57 bulbs). Quick connect/disconnect wiring feature. WES Left WES Right Standard Over 80 Tail Lamp Cost effective for utility trailers 80 wide or wider. Bulbs/lenses are easily replaceable (uses standard #1157 and #57 bulbs). Quick connect/disconnect wiring feature. Meets all DOT-108 lighting regs. WES Right WES Left "Over 80" Tail Lights Quick connect and disconnect wiring. Meets DOT-108 lighting standards. WES Left Tail Light WES Right Tail Light Waterproof "Over 80" Low Profile Tail Lamp Most reliable Waterproof design in industry. Sealed capsule protects bulbs against corrosion or thermoshock. Meets DOT-108 lighting reqs for trailers 80 wide or wider. WES Left WES Right WES Replacement Capsule WES Lens Only

19 Trailer Lighting Wesbar Electric Wire Harnesses/Connectors Provides years of dependable service. Conforms to SAE, NMMA/TMA standards. 4-Way Harness: WES Wiring Kit Trailer Wishbone WES Trunk Connector 48 with 18 Ground WES Trailer Connector 18 Wunside WES Trunk/Trailer Connector Ext 2 WES Trunk/Trailer Connector Kit 5-Way Harness: WES Trunk Connector 72 with 48 Ground WES Trailer Connector 48 Wishbone Trailer Plug Adapter: WES Adapter 7-Way Veh to 5-Way Trailer Tow Vehicles Separate stop/turn signals require an electronic tail light converter to convert vehicle 3-circuit wiring system to trailer s 2-circuit wiring system. Assures safe operation of all trailer lights. Electronic Tail Light Converters Draws power directly through tail lamp circuit. Provides basic electronics. Conversion to US/Canadian trailer lighting systems. Standard 4-flat 4 trunk connector with 18 ground. WES Converter Polarized Plug Plug & socket set, 2 wire. Display pack. SDG Plug Standard Identification Light Bar Zinc plated bar with pre-wired red. Riveted on 6 centers. Quick connect and disconnect wiring. Lenses/bulbs (Auto #57 ) easily replaceable. Meets/exceeds state/fed. regs-vehicles 80 wide or wider. WES Light Bar Waterproof Identification Light Bars Meets or exceeds all state & federal regs. Specified for vehicles 80 wide or wider. Dimensions WES /2 L x 1-1/8 H x 1 D Class A Reflex Reflectors Meet/exceed all DOT & SAE Class A specs. Pressure sensitive back bonds to any smooth surface. WES Reflector 3-1/4 X 1-1/2 Amber WES Reflector 3-1/4 X 1-1/2 Red

20 60 Light Bulbs Standard Combo Clearance: Side Light with Reflector Hidden mounting hardware with snap fit lens & built in reflector. Meets DOT-108 regs. for clearance lights. ("PC" rated) Red or amber - quick connect/disconnect wiring feature. Bulbs & lenses easily replaced (automobile bulb #194). Dimensions: 3-3/4" L x 2-1/4" W x 15/16" H. White base. WES Side Light Amber Surface Mount WES Side Light Red Surface Mount Perko Bulbs Double contact bayonet bulb. Volts Watts Amps PRK374001CLR PRK374002CLR PRK374003CLR PRK374004CLR Perko Single Contact Prefocus Bulbs C-8 filament clear. 12 volts. Amps PRK373001CLR...25 PRK373002CLR...55 PRK373003CLR...77 PRK373004CLR PRK373005CLR Double Contact - Lamp Style: 29 L. 12 volts - candlepower 4. Double contact bayonet base. ANC Lamp Miniature 68 2/Pk Single Contact - Lamp Style: 44 Q. 12 volts - candlepower 15. Single contact bayonet base. ANC Lamp Miniature 93 2/Pk Double Contact - Lamp Style: 32 M. 12 volts - candlepower 15. Double contact bayonet base. ANC Lamp Miniature 94 2/Pk Wedge Base - Lamp Style: 13 E. 12 volts - candlepower 2 - wedge base. Single Contact - Lamp Style: 40 O. 12 volts - candlepower 15. Single contact bayonet base. ANC Lamp Miniature 194 2/Pk ANC Lamp Miniature /Pk Perko Double Ended Festoon Bulbs 2 bulbs per bag. Voltage Candle Pw. Amps PRK69DP PRK70DP PRK70DP PRK70DP PRK71DP Perko Medium Prefocus Bulbs Clear volts. Wattage PRK342000CLR PRK342002CLR...25 PRK342003CLR...40 PRK342004CLR...60 PRK342RS4CLR...60 Mini Bayonet - Lamp Style: 20 H. 12 volts - candlepower 2. Miniature bayonet base. ANC Lamp Miniature 57 2/Pk Double Contact - Lamp Style: 25 K. 12 volts - candlepower 15. Double contact bayonet base. ANC Lamp Miniature /Pk Single Contact Index - Lamp Style: 47 S. 12 volts - candlepower 32/3. Single contact index base. ANC Lamp Miniature /Pk Mini Lamp with Bayonet Base Double contact 200 life hours. 12 volt amps - 23 watts. ANC Lamp Miniature /Pk Incandescent Lamp with Bayonet Base Single contact 500 life hours. 12 volt amps - 18 watts. ANC Lamp Incandescent /Pk

21 Light Bulbs 61 Mini Lamp with Bayonet Base Double contact life hours. 12 volt amps - 18 watts. ANC Lamp Miniature /Pk Navigation Lamp Single contact life hours. 12 volt amps -25 watts. ANC Lamp Navigation 12V 25W Mini Lamp with Bayonet Base 1000 life hours. 12 volt -.75 amps - 10 watts. ANC Lamp Miniature /Pk Mini Lamp 1000 life hours. 12 volt -.25 amps - 4 watts. Mini Lamp with Bayonet Base 12 volt watt -.27 amp. ANC Lamp Miniature /Pk ANC Lamp Miniature /Pk Mini Festoon Lamp Festoon end caps life hours. 12 volt -.90 amps - 15 watts. ANC Lamp Miniature /Pk Ancor Mini Halogen Lamp Style: 104 AL. 12 volts - 5 watt - halogen - candlepower 5. ANC Lamp Halogen 12V 5W Mini Halogen Lamps Style: 99 AH - candlepower AH - candlepower volts - 10 watt - halogen. ANC Lamp Halogen 12V 5W ANC Lamp Halogen 12V 10W ANC Lamp Halogen 12V 20W Mini-Bayonet Bulb Nickel plated brass base. Pair per display pack. Overall length: 15/16" - Bulb width: 7/16". 12 amp volt -1.7 watt - 1 candlepower. SDG Bulb # V.12A Mini Festoon Lamp Festoon end caps life hours. 12 volt -.70 amps - 10 watts. ANC Lamp Miniature /Pk Festoon Lamp Festoon end caps life hours. 12 volt -.50 amps - 6 watts. ANC Lamp Festoon 12V 6W Mini Festoon Lamp Festoon end caps life hours. 12 volt -.80 amps - 10 watts. ANC Lamp Miniature 2/Pk Festoon Lamp Festoon end caps life hours. 12 volt -.80 amps - 10 watts. ANC Lamp Festoon 12V 10W Navigation Lamp Double contact life hours. 12 volt amps -30 watts. ANC Lamp Navigation 12V Mini-Bayonet Bulb Nickel plated brass base. Pair per display pack. Overall length: 1-1/16" - Bulb width: 9/16". 24 amp volt watt - 2 candlepower. SDG Bulb 14V 3.4W Festoon Light Bulb Nickel plated brass base. Pair per display pack. Overall length: 1-9/16" - Bulb width: 7/16" amp volt watt - 12 candlepower. SDG Bulb # V.97A Bayonet Bulb Nickel plated brass base. Pair per display pack. Overall length: 1-7/8" - Bulb width: 1" amp volt watt - 32 candlepower. SDG Bulb # V 1.8A Double Contact - Bayonet Base Bulb Nickel plated brass base. Pair per display pack. Overall length: 1-3/8" - Bulb width: 3/4"..58 amp volt watt - 6 candlepower. SDG Bulb #90 13V

22 62 Light Bulbs Quartz / Halogen Bulbs Double ended quartz line halogen bulbs. Volts Watts Alternate Seamar Number GEL PLSJ1000L120V GEL GE Miniature Bulbs Bulb # Volts Amps Base GEL A...Mini-Screw GEL A...Mini-Bayonet GEL A...Mini-Bayonet GEL A...Mini-Bayonet GEL A...D.C. Bayonet GEL A...S.C.Bayonet GEL A...D.C. Bayonet GEL A...S.C.Bayonet GEL A...D.C. Bayonet GEL A...S.C.Bayonet GEL A...D.C. Bayonet GEL A...S.C.Bayonet GEL A...Mini-Screw GEL S.C. Bayonet GEL D.C. Bayonet GEL A...D.C. Index GEL A...D.C. Bayonet GEL A...S.C. Bayonet GEL A...D.C. Index GEL A...D.C. Bayonet GEL A...Mini Bayonet GEL A...Mini Bayonet GEL A...Mini Bayonet GEL A...Mini Bayonet Miniature Flange Base - Halogen Bulb Nickel plated brass base, 12 volt, 10 watt. Dimensions: Length: 1-1/16" - Height: 7/16". SDG Bulb 12V 10W Halogen PR DP Wedge Light Bulb.27 amps - 14 volt watt - 2 candlepower. Length: 1" - Width: 3/8". Pair per display pack. SDG Bulb # V 1.04A Pair DP Pre-Focus Bulb 40 Watt 120 volts. PRK342000CLR...Bulb Pre-Focus 7.5W, 120V PRK342003CLR...Bulb Pre-Focus 40W, 120V PRK342002CLR...Bulb Pre-Focus 25W, 120V PRK342004CLR...Bulb Pre-Focus 60W, 120V Quartz / Halogen Lamp Double ended quartzline halogen bulbs. 150W, 12V. PLSQ150T3CL12..Lamp Qtz/Halogen Quartz / Halogen Lamp Double ended quartzline halogen bulbs. PLSJ1000L120V...Qtz/Hlgn Q1000T3 120v PLSJ1000W130V..Qtz/Hlgn 1000w 130v NMP PLSJ1000W240V..Qtz/Hlgn Q1000T3 240v PLSJ1500W208V..Qtz/Hlgn Q1500T3 208v GE Fluorescent Bulbs Number Watts GEL F4T5/CW...4 GEL F8T5/CW...8 GEL F15T8/CW...15 GEL F96T12/CW/HOWM...95 GE Sealed Beam Lamps Bulb # Watts Amps Volt GEL W GEL W GEL W GEL W GEL W GEL W GEL W GEL W Standard Light Bulbs 2 per pack. Volts Watts ANC V...15W ANC V...25W ANC V...50W ANC V...75W ANC V...100W ANC V...25W ANC V...50W ANC V...25W ANC V...50W

23 Light Bulbs and Flashlights 63 GE Rough Service Bulbs Incandescent, rough service, frosted, standard base. Volts Watts GEL GEL GEL GEL GEL GEL GE Standard Light Bulbs Incandescent, frosted, standard base. Volts Watts GEL GEL GEL GEL GEL GEL GEL GEL GEL GEL Incandescent Bulb Basic general purpose utility bulbs for direct, unfiltered light. Various wattages, see below. 120V in 4 Pack - 130V in 2 pack. GEL Bulb Incandescent 120V 60 Watt 4/Pk GEL Bulb Incandescent 120V 100 Watt 4/Pk GEL Bulb Incandescent 130V 40 Watt 2/Pk GEL Bulb Incandescent 130V 60 Watt 2/Pk GEL Bulb Incandescent 130V 75 Watt 2/Pk GEL Bulb Incandescent 130V 100 Watt 2/Pk Replacement Bulb Halogen bulb with replacement lens gasket. Use with Guest spotlights: / / / 292C-5 or 291C-5. GESU-3147-P...Lamp Sealed Beam 12V Aqua Signal Floodlight Bulbs Stock# Volts Watts Length Diameter AQS R7s (RSC) 220v/1000w Halogen 10 7/16 AQS R7s (RSC) 120v/500w Halogen 4-5/8 7/8 AQS R7s (RSC) 120v/1000w Halogen 7-1/2 7/16 AQS R7s (RSC) 12v/100w Halogen 3-1/16 7/16 AQS R7s (RSC) 220v/200w Halogen 3-1/16 7/16 AQS R7s (RSC) 24v/200w Halogen 2-1/2 9/16 AQS R7s (RSC) 110v/200w Halogen 3 7/16

24 64 Flashlights Pocket Mitylight Unbreakable Xenoy resin - 2 AAA batteries. Submersible to 500 feet - 6,000 candlepower. Focused beam - 400% brighter - length:4-3/4". Shirt clip - lazer spot module - litebender. StocK# Super Sabrelight Submersible to 500 feet. 12,000 candlepower - length: 7-13/16". Body unbreakable ABS with polycarbonate lens. Lazer spot xenon lamp module. Tight focus, collimated beam with 400% increase candlepower. 3 C batteries (not included). PEL2000CBLK...Super Sabrelite 2000C Black PEL2000CO...Super Saberlite 2000C Orange PEL2000CY...Super Sabrelite 2000C Yellow Mini Flasher - IR LED Submersible to 500 feet - 4,000 candlepower. LED marker lite - night vision equipment. LED pulses - frequency: 2 per sec - 65 hours. 2 coin batteries - length 1-3/4" PEL2130C...Mini Flasher Tracker - Pocket Flashlight Xenon pre-focused lamp module. Submersible to 500 feet - 6,000 candlepower. Hat/clothing clip - molded in snap hook. Stainless key ring hours. 2 AAA batteries - length: 3-1/2". PEL2140C...Tracker Pocket Flashlight Versabrite - Head Lamp Xenon resin LMX lamp - 6,000 candlepower. Water resistant - O-ring sealed - Black. Multi-position swivel head - 2 night vision discs. Visor cap/clothing clip - 2 AA alkaline batteries. Magnet and velcro strap - Length: 3-7/8". PEL2250C...Headlamp Versabrite 2AA Super Duper Mitylight Xenon resin body: chemically resistant. 8,000 candlepower - length: 5-5/8". Polycarbonate lens - 2 AA alkaline batteries. Pre-focus modified spot beam, 600% brighter. PEL1900CB...Mitylite Pocket Size, Black PEL1900CBL...Mitylite Pocket Size, Blue PEL1900CNG...Mitylite Pocket Size, Neon Green PEL1900CO...Mitylite Pocket Size, Orange PEL1900CW...Mitylite Pocket Size, White PEL1900CY...Mitylite Pocket Size, Yellow PEL2300C...Super Duper Mitylite 2AA Super Pelilite Unbreakable ABS resin - polycarbonate lens. Submersible to 250 feet - 10,000 candlepower. 400% more light - 2 C batteries (not included). Length: 6" - lanyard. MityLight Plus Body unbreakable xenoy, resists chemicals. Polycarbonate lens/abs shroud. Focused xenon modified spot beam 600% brighter. 8,000 candlepower - length 6-1/4" - 2AA batteries. PEL2340CY...Mitylite Plus AA End Switch Pelican Steathlite Watertight to 500 feet. Length: 6-1/2" diameter: 1-5/8". Unbreakable ABS body with high impact polycarbonate lens. Pelican's Laser Spot Xenon lamp module with unsurpassed white collimated light beam. Includes: 1-handed safety switch operation. Double shock mounted battery compartment. Black lanyard. 4 AA alkaline batteries good for 5-6 hours (not included). FM, CSA, MSHA approved non-incendiary. Packaged on a color hang card. PEL2400CO...Orange Stealthlite PEL2400CY...Yellow Stealthlite Heads Up Light Water resistant - candlepower:10,000. Body of ABS resin - lightweight. Super brite halogen & LED - 100,000 hours use. Multi-angle pivoting head with a focusable light beam. 4 AAA batteries - 3 hrs. halogen hrs LED. Cloth strap: hat or bare head. Rubber strap: helmet & hard hat. PEL2640C...Headsup Lite M10 Flashlight Body unbreakable xenoy with polycarbonate lens. Pre-focused xenon lazer spot beam. Water resistant, o-ring sealed. 30,000 candlepower. Sure grip sheath: resists chemicals/extreme temps. 4 C batteries (not included) - length: 11-1/4". Polarity battery guard tray included. PEL1800CBLK...Super Pelilite 2C Black PEL1800CO...Super Pelilite 2C Orange PEL1800CY...Super Pelilite 2C Yellow PEL8040BY...Flashlight M10 Yellow

25 Batteries / Flashlights 65 Pocket Sabre Unbreakable ABS resin - polycarbonate lens. Submersible to 250 feet - 10,000 candlepower. 2 C batteries - 400% more light - length: 5-13/16". Xenon lamp module & lanyard. PEL1820CB...Pocket Sabre Black PEL1820CO...Pocket Sabre Orange PEL1820CY...Pocket Sabre Yellow LED FlashLight Water resistant - 50,000 hrs. Includes: 4 LR44 coincells - 130hrs. End switch - blink or continuous light. Neck lanyard - pocket clip. PEL1930CB...Light Led L1 Black PEL1930CY...Light Led L1 Yellow Mitylight - Mini System Kit Submersible to 500 feet. 2 AAA batteries - spare lamp. 2 nite vision disks (red & blue/green). Spare O-ring - stainless steel ring. PEL1950C...Mitylite Kit Mini System 2AAA Float Lite Flashlight Rugged international orange. Heavy duty waterproof. Magna-Beam reflector gives broad diffused pattern. Corrosion resistant: unaffected by oil, gas & water. Shock absorbing bulb assembly. Ribbed. Anti roll switch guard. Will not float with alkaline batteries. FTN93IB...Flashlight Floating Orange FTN932IB...Flashlight 3 Cell USCG Alkaline Batteries Energizer alkaline batteries. Industrial batteries are bulk packed. EVEE92...AAA EVEE92BP-2...AAA - 2/card EVEEN92...AAA - industrial EVEEN91...AA - industrial EVEE91...AA EVEE91BP-2...AA - 2/card EVEEN93...C - industrial EVEE93...C EVEE93BP-2...C - 2/card EVEEN95...D - industrial EVEE95...D EVEE95BP-2...D - 2/card EVEEN volt - industrial EVE volt EVE522BP...9 volt carded Regular Batteries EVE510S...6 Volt with Screws Heavy Duty Batteries EVE Volt with Springs Energizer Alkaline Batteries 6 Volt Batteries Stock# EVE Volt with Screws EVE Volt with Springs Eveready Flashlights EVEIN215WB-S...AA Industrial EVEE220WB-S...AA Superbright EVEE250WB-S...2-D Superbright EVEIN251WB-S...2-D Industrial EVE D Heavy duty EVE D Safety EVE D Heavy duty Eveready Lanterns Push button switch. Comes with 6 Volt #509 lantern battery. EVE Volt Safety Lantern 215WB-S 251WB-S 220WB-S 250WB-S

26 66 Battery Chargers 2 Amp Battery Charger Reverse polarity protected, short circuit protected. 3-stage switching electronic circuit. Maintenance mode protects in storage. Fully potted to waterproof electronics. Vibration/shock protected. Total amps: 2-1 amps per output: 2 amps. Battery system: 1-12 volt - output voltage: 12VDC. DC output: 1-4 DC cables with terminal rings. Input voltage: VAC/50-60Hz. Input connection: 6 AC cord with connect charge plug. GES Battery Charger 10 Amp Battery Charger Ignition protected, reverse polarity protected. Short circuit protected. 3-stage switching electronic circuit. Maintenance mode protects in storage. Fully potted to waterproof electronics. For flooded, gel & AGM batteries. Charges 2 separate 12V batteries - total amps: 10. Number of outputs: 2 amps per output: 5/5. Battery system: 2-12V - output voltage: 12V. DC output: studs for hardwire. Input voltage: VDC/60Hz. AC: studs for hardwire. GES2610A...Battery Charger 10A 2/Batt 3 Amp Portable Charger Reverse polarity protected. Short circuit protected. 3-stage switching electronic circuit. Maintenance mode protects in storage. Fully potted to waterproof electronics. Total amps: 3 amps, number of outputs: 1. Battery system: 1-12V - output voltage: 12VDC. DC output: 4 output wires with alligator clips. GES Battery Charger 3A 6 Amp Portable Charger Reverse polarity protected, short circuit protected. Self protecting/extreme ambient conditions. Vibration/shock protected. Maintenance mode protects in storage. 3-stage switching electronic circuit. Fully potted to waterproof electronics. For flooded, GEL & AGM batteries. Output voltage: 12 VDC, Amps: 6. DC output: 4 - output wires with alligator clips. Input voltage: V AC/50-60Hz. Input connection: 6 AC cord with connect charge plug. GES2606A...Battery Charger 6A GES Trolling Motor Chargers On board - 6 amps. Recovery time: 8-10 hours. Ring terminals: 6-3/8" x 3-1/2" x 2-1/16". 2-4' DC cables. GES2608A...Battery Charger 6A Charge Pro Prewired charger for two 12V batteries or a 24V configuration. Has two 5 amp outputs (10 amp total). Sealed & waterproof. 2 year warranty. GES2611A...Battery Charger 20 Amp Dual Battery Charger Ignition protected. Total amps: 20 amps. Reverse polarity protected, short circuit protected. 2 outputs - amps per output: 10/10. 3-stage switching electronic circuit. Maintenance mode protects batteries in storage. Vibration & shock protected. Self protecting under extreme ambient conditions. For flooded, GEL & AGM Batteries. GES2620A...Battery Charger 10A /10A 2/Bat 40 Amp Battery Charger Ignition protected, reverse polarity protected. Short circuit protected - vibration/shock protected. 3-stage switching electronic circuit. Maintenance mode protects batteries in storage. Fully potted to waterproof electronics. For flooded, GEL & AGM batteries. Total amps: 40 amps - 3 outputs - amps per output: 30/5/5, output voltage: 12VDC per output. Battery system: 3-12V. Input voltage: VAC/50-60Hz. Input connection: 30 amp, studs for hardwire. GES Battery Charger 30/5/5A 3/Batt

27 Batteries 67 4D - Commercial Battery Extra heavy-duty. 12 volt - 36 month. Cold crank reserve (RC) 295. Dimensions: 20-3/4" L x 8-1/4" W x 9-5/8" H. ISB4DXHD...Battery 12V 4D XHD 8D - Commercial Battery Extra heavy duty. 12 volt - 36 month. Cold crank reserve (RC) 380. Dimensions: 20-3/4" L x 11" W x 9-5/8" H. ISB8DXHD...Battery 12V 8D XHD Marine/RV Deep Cycle Battery Outstanding cycle life/chargeability/high temp tolerance. 12 volt - 30 month. 3/4" non-tapered lugs. Cold crank marine crank 690. Dimensions: 11" L x 6-7/8" W x 9-1/2" H. Marine/RV Deep Cycle Battery Outstanding cycle life/chargeability/high temp tolerance. 12 volt - 30 month. 3/4" non-tapered lugs. Cold crank marine crank 750. Dimensions: 12-3/4" L x 6-3/4" W x 9-1/2" H. ISBSRM24...Battery Group 24 12V Deep Cycle ISBSRM27...Battery Group 27 12V Deep Cycle 4D - Deep Cycle Battery Extra heavy-duty. 12 volt - 30 month. SAE: cold crank ca 1645 Reserve: (RC) 390. Dimensions: 20-3/4" L x 8-1/4" W x 9-5/8" H. 8D - Deep Cycle Battery Extra heavy duty. 12 volt - 36 month. SAE: cold crank Reserve: (RC) 455 at 25 amp - (RC) 106 at 75 amp. Dimensions: 20-3/4" L x 8-1/4" W x 9-5/8" H. ISBSRM4D...Battery 4D 12V Deep Cycle ISBUSRM8D...Battery 8D 12V Deep Cycle Battery Terminal Covers Injection molded PVC. Color: red and black. Prevents accidental grounding of battery terminals. Meets USCG requirements & ABYC recommendations. SDG Battery Terminal Covers Pr Battery Box Direct restraint system, easiest installation. Straight cable entry path, no bending heavy cables. Electrolyte reservoir, battery held away from spilled electrolytes. Captive lid hold down system, no lost nuts in bilge. If installed as per instructions battery box satisfies: USCG Code of Federal Regs. Title 33, Subpart I, Part BLS D Battery Box Strap for Battery Box Woven polypropylene, stainless and brass chrome plated. Comes with 2 strap eyes & screws. Width: 1" - length: 4' - buckle 1-15/16". SDG Strap HD Battery Box HD-Series Battery Switch - Single Circuit ON/OFF 600 amp continuous rating. Accepts 2 4/0 battery cables per terminal. Ignition protected, safely install on gas powered boats..870 (22.01mm) stud length accepts multiple cable terminals. 1/2 tin plated copper studs, max conductivity/corrosion resist. Tactile textures indicate knob position by feel only. Surface or rear panel mounting. Meets ABYC regs. Ratings: Inrush rating: 0.25 sec (10 repeats)* 2,000 amps DC Cranking rating: 9.75 sec (10 repeats)* 1,200 amps DC Intermittent: 5 min (UL 1107) 900 amps DC Continuous: (UL 1107) 600 amps DC Volt rating: 48 volts DC max. BLS Switch Battery On/Off HD BLS Switch Battery On/Off HD with AFD BLS Switch Butt HD Select with AFD

28 68 Battery Switches E-Series Battery Switch Selector 350A continuous rating 45% higher than standard switches. Ignition protected: safely install on gas powered boats. Tactile textures indicate knob position by feel only. Case design allows surface/rear panel mounting. Accepts up to 4/0 battery cables. BLS9001E...Battery Switch 4 Position "Cruiser" Series Battery Switch Full 360 selection & tough polycarbonate cases. Rated at 230 amps continuous amps momentary. Measures 5.5" diameter x 2.625" deep. Selector switch for either battery: both batteries in parallel or complete disconnect of both batteries. On/off switch permits battery to be shut off near source. GES On/Off/both with AFD E-Series Battery Switch Selector with Alternator Field Disconnect 350A continuous rating, 45% higher than standard switch. Ignition protected. Safely install on gas powered boats. Tactile textures indicate knob position by feel only. Accepts up to 4/0 battery cables. Fits all Perko/Guest low amp battery switch holes. Stud Length 7/8 - Accepts multiple cable terminals. Surface/Rear panel mount - Studs 3/8 M10 tin plated copper. Meets American boat/yacht council (ABYC) regs. BLS9002E...Battery Switch 4 Pos with AFD Black Battery Selector Switch with AFD Alternator field disconnect (AFD) selects any position also off with no damage to alternator or electrical. AFD required on some electrical systems. Copper sweep contacts. Contacts select all positions but off as engine runs. Use with 6, 12, 24 or 36 volt systems Built in skirt protects connections. Flat 360 contact, up to 60% more contact area. Retrofit/existing holes - surface/rear panel mounting. GES2110A...Switch Battery Select with AFD E-Series Battery Switch Single Circuit On/Off 350A continuous rating 45% higher than standard switches. Ignition protected, safely install aboard gas powered boats. Tactile textures indicate knob position by feel only. Case design allows surface/rear panel mounting. Accepts up to 4/0 battery cables. Fits all Perko/Guest low amp/battery switch hole patterns. 7/8 stud length accepts multiple cable terminals. BLS9003E...Battery Switch On/Off Battery Switch Single Circuit ON/OFF with Alternator Field Disconnect 350A continuous rating is 45% higher than standard switch. Ignition protected - safely install on gas powered boats. Tactile textures indicate knob position by feel only. Case design allows surface or rear panel mounting. Accepts up to 4/0 battery cables. Fits all Perko/Guest low amp battery switch holes. Stud length: 7/8 - accepts multiple cable terminals. BLS9004E...Battery Switch On/Off with AFD Heavy Duty Battery Selector Switch For 6V, 12V, 24V, or 36 volt system. Easy retrofit. Positive click on all positions. Tough polycarbonate case. AFD selection of any position including "Off" without harm. Rated: 450 amps continuous amps momentary. Heavy duty copper 360 sweep contacts 60% more area. Marine grade construction. Surface or rear panel mount. GES2300 -A...Switch Battery Select HD Diesel Power Battery Heavy Duty Switch Continuous amps: Momentary amps: 800. Cable lug size: 5/8 - color: gray. Dimensions: 5-1/2 x 3-1/2 H. Diesel Power Battery Extra Duty On/Off Switch Continuous amps: Momentary amps: Cable lug size: 5/8 - color: gray. Dimensions: 5-1/2 sq x 3-1/2 H. GES2303-A...Switch On/Off Heavy Duty GES2304-A...Switch On/Off Extra Heavy Duty

29 Battery Switches and Sockets 69 Battery Selector Switches Surface mount red plastic housing with large black plastic knob. Protects copper contacts/brass terminals used as electrical connections. Use with systems under 50 volts. Capacity: 250 amps continuous, 360 amps intermittent. Measures 5-1/4" dia. x 2-5/8" depth. PRK8501DP...On/Off/both without AFD PRK8503DP...On/Off/both with AFD PRK8504DP...On/Off/both with AFD with keylock Bayonet Sockets Double contact bayonet sockets. Brass, with 6" wire lead. Double Contact Socket Navigation lights on vessels 65.6 ft. Overall height: 7/8" - overall diameter: 1-3/4". PRK52DP...Bulb Socket PRK134...Socket - Double Contact Heavy Duty Battery Selector Switch Ignition protected, heavy duty use. Comes with alternator field disconnect. Used for: volt marine electrical systems. Capacity rated: 380 amps continuous. 850 amps intermittent (5 min on - 5 min off). Size: 5-1/4" Sq - depth: 3-3/8". PRK8603DP...Switch Heavy Duty Screw Socket Medium spare screw socket. PRK226...Socket Med Screw Main Battery Switches Units are same design/construction as 8500 series, except they are offered as main disconnect switches. For use with systems under 50 volts. Capacity amps continuous, 360 amps intermittent. PRK9601DP...On/Off switch PRK9602DP...On/Off switch with keylock PRK9603DP...On/Off switch with AFD PRK9604DP...On/Off switch with AFD and key Battery Switch Machined brass, molded bakelite. 210 amps - color: red. Diameter: 5" - width: 1-7/8" - cut out: 3-1/2". SDG Switch Battery Bayonet Socket Single contact bayonet socket. PRK1109DP...6" Length Watertight Deck Connections Rated for 15 amps at 12 volts. Polarized double contact connector. Flange gasket/integral waterproof cap for base if plug is removed. Dia. PRK1189DP...Chrome Plated Brass...1-5/8" PRK1190DP...Chrome Plated Zinc...1-5/8" Bayonet Socket Double contact bayonet socket. Black plastic body, brass spring. Length PRK24DP1...10" Pigtail Watertight Cable Outlets 5/16" O.D. cable. Rubber grommet for watertight passage of cable. Dia. PRK424DP...Chrome Plated Brass...1-1/4 PRK1191DP...Chrome Plated Zinc...1-1/4"

30 70 Sockets 12 Volt Power Socket Stamped brass/injection molded nylon & ABS. Lighter Plug. Display pack. A B C D E Weight SDG Complete...2-1/4"...1-1/4"...1-1/2" 1-1/16" 1-7/8".08 lb. SDG Socket & Cap...2-1/4"...1-1/4"...1-1/2" 1-1/16" 1-7/8".04 lb. SDG Plug Only Power Socket 12 Volt Stainless steel socket & molded cap. Mounting plate of 304 stainless steel. Width: 1-1/8" - screw to screw: 1-11/16". SDG Power Socket 12V SDG Power Socket 12V DP Deluxe Power Socket & Cap Stamped brass/injection molded nylon & ABS. Max rating: 24 volt - 16 amp - 5 amp fuse. Length: 1-9/16" - width: 1-1/16" - dia:1-7/16". SDG Power Socket Polarized Cable Outlet Machined brass chrome plated. Features: Polarized pins sized for connection in only 1 way. SDG Complete Outlet SDG Deck Outlet only SDG Plug only Polarized Molded Connector Machined brass/molded bakelite and neoprene. Display pack. Polarized pins sized for connection in only 1 way. Stock SDG pin SDG pin SDG pin Cigarette Lighter/Chart Light Both models come with stamped 304 stainless mounting plate. Combo chart light and cigarette lighter with flick of switch. Chrome steel sockets should only be used on fresh water boats. Display pack. Socket Material A B Fastener Weight SDG Chrome Steel Socket & Lighter (Complete) 1-11/16" 1-1/8" #8 RH.25 lb. SDG Replacement lighter for SDG Stainless Steel Socket & Lighter (Complete) 1-11/16" 1-1/8" #8 RH.25 lb. SDG Replacement lighter for Power Socket with Battery Clips Battery clip adapter: Use of 12 volt power on small boats with no built-in power socket. Provide lighting or other 12 volt power needs from engine. Length SDG feet Polarized Connector Machined brass/injection molded thermo plastic. SDG amp 4-pin Polarized Connection Machined brass/chrome plated. Safety feature: Polarized pins sized for connection in only 1 way. SDG amp 2-pin SDG amp 3-pin SDG amp 4-pin

31 Cole Hersee Switches 71 Insta-Trim Comp Switch Waterproof, black. Sealed between switch & dashboard. No interrupter relays needed. Easy install with 1.5" hole saw. Adapts to other brands of trim tabs. Drop in replacement for all Insta-Trim switches. BLC2002TTCBFG... Black Waterproof Switch Marine Ignition Switch 3 position. Key removes only in Off, spring return. rating: 12 volt DC - 10A ignition/5a start. 3 brass screw terminals - chrome plated brass facenut. Brass: case/mounting hardware. Brass mount stem: 13/16"-24 long 1-7/32". Fits panels up to 1" thick. COHM550...Switch Ignition Marine 12V Push Pull Switch 1 circuit - 20A at 12V DC 6-36V. Brass housing, 2 brass screw terminals. Chrome plated brass knob, gasket sealed case. Brass mounting stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 3/4" thick. Push Pull Switch 2 circuit - 20A at 12V DC 6-36V. SPST, Off-On-On. Brass housing, 3 brass screw terminals. Chrome plated brass knob thread. Brass mounting stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 1" thick - brass facenut/washer/hexnut. COHM482...Switch Cole Hersee #M482 Medium Duty Toggle Switch SPST: Down: Off Up: On. Phenolic housing with steel frame. Keyway in down position. 12 volt DC - 10 amp. Chrome plated brass: standard handle/facenut/stem. 2 screw terminals, silver contacts. Mount stem: 15/32"-32 thread 15/32" long. Fits panels up to 9/32" thick. Push Button Momentary Switch Marine construction - normally Off/SPST/Off momentary On. On with button depressed/spring return to off. Corrosion resist brass case/plunger button/mount hardware. Moisture repellant insulators. COHM484...Switch Cole Hersee #M484 Push Button Switch Marine construction, 2 brass screw terminals. Brass mounting stem: 5/8" - 32 diameter x 1" long. Fits panels up to 3/4" thick. Gasket sealed case. COHM Switch Momentary COHM486...Push Pull Switch COHM531...Switch 3 Position Push Pull Medium Duty Toggle Switch SPST: Down: Off Up: On. Phenolic housing with steel frame. Keyway in down position. 12 volt DC - 10 amp. Chrome plated brass standard handle/facenut/stem. 2 screw terminals, silver contacts. Mount stem: 15/32" - 32 thread 15/32" long. Fits panels up to 9/32" thick. COHM584...Switch Tog Cole Hersee #M584 Push Pull Switch Marine construction PVC coated brass housing. 1 circuit - 10A at 12 volt DC 6A-36V DC. Chrome-plated brass knob thread. 2 insulated copper wire leads, 12" long. Brass mount stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 3/4" thick. Mount hardware included. COHM606...Switch Cole Hersee #M606 Xtra Heavy Duty Push Button Momentary Switch Marine construction - normally Off SPST Off Momentary On. On with button depressed, spring return to off. Brass mount stem 5/8" - 32 thread 1-3/8" long. Corrosion resist brass case/plunger button/mount hardware. Snap on rubber cap, moisture repellant insulators. Silver contacts - 35A at 12V - 20A at 24V - 10A at 36V DC. Fits panels up to 1" thick. COHM626...Switch Push Button Momentary Push/Pull Switch 2 circuit - 20A at 12V DC 6-36V. Brass housing, 3 brass screw terminals. Chrome plated brass knob. Brass mount stem: 3/8"-32 thread 1-1/4"long. Brass facenut/washer/hexnut. Fits panels up to 1" thick. COHM630...Switch Push-Pull SPDT 2-Circuit

32 72 Cole Hersee Switches Heavy Duty Switches - 25A Standard 11/16" or long handle 1-1/2"- universal application - silver contacts. Mounting stem is nickel plated brass 15/32"-32 thread - 15/32" long. Phenolic housing with plated steel cap. Nickel plated brass mount hardware. Blade terminals: 250 quick connect. Screw terminals: 6-32 screws. 25 amp at 12 volt DC - 15 amp at 24 volt DC. Cole Hersey Blister Packs COHM426BP...Terminal Block 4 POLE BP COHM427BP...Terminal Block 6 POLE BP COHM428BP...Terminal Block 8 POLE BP COHM429BP...Terminal Block 10 POLE BP COHM449BP...Terminal Block 10 POLE BP COHM482BP...Switch Push Pull 2 Position BP COHM484BP...Toggle Switch SPST BP COHM485BP...Switch Push Button MOM ON BP COHM489BP...Key Switch 2 POSIT Ignition BP COHM550BP...Key Switch 3-POSIT with screws BP COHM584BP...Toggle Switch SPST 6 Leads BP COHM594...Toggle Switch SPST 20A 12V COHM606BP...Switch Push Pull PVC Coated BP COHM608BP...Push Button Switch PVC Coated COHM626BP...Push Button Switch with CAP BP COHM628BP...Switch Push Pull 2 Position BP COHM712BP...Key Switch 4 Posit Ignition BP Cole Hersey Blister Packs COH4112RCBP...Dual Alarm 12V Led BP COH Toggle Switch SPST 25Amp Weather COH55017BP...Toggle Switch DPST 25Amp BP COH55019BP...Toggle Switch DPD ON/OFF/ON BP COH BP...Toggle Switch SPDT BP COH55036BP...Toggle Switch SPDT Coated BP COH55054BP...Toggle Switch DPDT 25Amp 6WIR BP COH BP...Toggle Switch DPDT BP COH5582BP...Toggle Switch SPST BP COH5586BP...Toggle Switch SPDT BP COH5592BP...Toggle Switch DPDT BP COH81255BP...Boot For Toggle Switch BP COH81264BP...Boot For Toggle Switch Grey BP SPST Toggle Switch / PVC PVC coated - Up: On Down: Off. Two 8" leads - O-ring seal. Mounting stem is 11/32" long. Fits panels 3/16" thick. COH Switch Toggle SPST Plasticized Heavy Duty Toggle Switch SPDT On-Off-On. Up: On Center: Off Down:On. 3 screw terminals. 25 amp. COH Switch Toggle SPDT Heavy Duty Toggle Switch DPDT On-Off-On Up: On Center: Off Down:On. 6 screw terminals. 25 amp. COH Switch Toggle DPDT Xtra Heavy Duty Push/Pull Switch Silver laminated contacts 20A at 12 volt DC 6-36V. Brass mount stem: 1/2"-20 thread, 5/8" long. Black plastic knob with threaded metal insert. 2 screw terminals, plated steel case. COH Switch Push/Pull 20A SPST SPST Toggle Switch Up: On Down: Off. 2 screw terminals. COH Switch Toggle SPST HD 25A SPST Momentary Toggle Switch Up: Off Center: Momentary On. 2 screw terminals. COH Switch Toggle SPST HD

33 Cole Hersee Switches 73 SPDT Momentary - Toggle Switch / PVC PVC coated. Up: Momentary On Center: Off Down: Momentary On. Housing with three 8" leads - o-ring seal in stem. Mounting stem is 11/32" long - fits panels 3/16" thick. COH Switch Mom On-Off-Mom On SPDT Momentary Toggle Switch Up: Momentary On Center: Off Down: Momentary On. 3 blade terminals. COH Switch Toggle SPDT HD Windshield Wiper Switch 2 speed for permanent magnet electric wiper motors. For 12 volt or 24 volt DC. 3 positions: Off/Park/Low/High. Single motor without push-to-wash, 4 blade terminals. Without dynamic parking. COH Switch Windshield Wiper with Park Panel Light Indicator Extra wire for ground. Bezel: chrome plated brass 7/8" diameter. Mount stem: 3/4" diameter - 11/16" long. Lens: 17/32" diameter - 12V #53 bulb supplied. COHPL20RC...Light Red Panel Indicator 12V Heavy Duty Toggle Switch 25 amp - Up: On Center: Off Down: On. PVC coated housing with three 9.5" leads. 3 leads with tinned brass terminals. O-ring seal in stem. COH Switch Toggle SPDT Plasticized Toggle Switch Up: On Center: Off Down: Momentary On. 3 screw terminals. COH Toggle Switch SPDT HD Miscellaneous Cole Hersee Solenoid Continuous duty - 85A - 12V. Insulated SPST - normally off. 1 Circuit: Off/On. Bracket mounting holes: 5/16" x 19/32" on 2-13/64" centers. COH Solenoid SPST 12v 85A Panel Light Indicator Lens: Honeycomb pattern inside, smooth outside. Bezel: satin finish stainless steel 3/4" diameter. Mount stem: 1/2" diameter - 3/8" long. Lens: 5/16" diameter - 12V #53 bulb supplied. COHPL36AC...Light Amber Panel Indicator COHPL36BC...Light Blue Panel Indicator COHPL36GC...Light Green Panel Indicator COHPL36RC...Light Red Panel Indicator Double Contact - Panel Light Indicator Large faceted lens: 15/16" diameter, gasket sealed. Mount stem: 7/8" diameter - 3/4" long. Bezel is plated brass, 1-1/4" diameter. Lens: 15/16" diameter - 12V #68 bulb supplied. COHPL86RC...Light Red Panel Indicator 12V Toggle Half/Boot Seals Allows any length handle to protrude. Seals tightly to handle. Suitable for Cole Hersee toggle switches except squared ones. COH Boot For Toggle Switch Alarm Buzzer with Red Light Rugged combo warning light & buzzer, audible/visible. Universal use with any electrical switch. LED, red lens, long life 12 volt DC. Mount stem: 17/32" long 11/16" diameter. Body dimensions: 1-7/8" L x 1" W x 1-11/32" H. COH4112RC...Alarm Buzzer with Red Light Toggle Boot Seals Durable silicone rubber bonded to standard 15/32"-32 thread nickel plated brass hexnut. As nut tightens to stem, rubber forms O-ring seal with panel. Full boots covers standard 11/16" handle. Protects from moisture & dirt. COH Gray Boot For Toggle Switch

34 74 Perko & Sea Dog Switches Weather Proof Cap Weatherproof, dustproof cap for momentary swiches. Colors: Red or Black. COH Weather Proof Cap Red COH BP...Weather Proof Cap Black Light Tip Toggle Switch Lighted tip - 15 amp at 12V. Display pack. Circuit Action SDG SPST...On/Off SDG SPDT...On/Off/On SDG DPDT...On/Off/On Flexible Rubber Cap Weatherproof black rubber cap. Permanently fastened to nut by a rolled brass bezel. Deep threaded 5/8"-32 aluminum mount nut/positive seal. Fits all push button switches with 5/8"-32 thread mount stem. Toggle Switch Single pole, single throw (off-on). Rated for 6 amps at 12 volts. Nickel plated brass toggle with chrome plated face nut. COH Cap Weather Proof Black PRK514DP...Off-On Toggle Swtich Contura Switch Stamped brass, injection molded nylon polycarbonate. SPDT circuit - On/Off/On action. 20 amp - 12 volt. Dimensions: Length: 1-7/16" - Width: 7/8". SDG Contura Switch On/Off/On DP SDG Contura Switch On/Off/On DP Illuminated Contura Switch Rated 20 amp at 12V. Display pack. Circuit Action SDG SPST...On/Off SDG DPDT...On/Off/On Push-Button Switch Black plastic weather resistant cover. Push-on/push-off. Rated 10 amps at volts. PRK701DP...Switch Push Button Red Illuminated Rocker Switch Rated 15 amp at 12V. Display pack. Circuit Action SDG SPST...On/Off Toggle Switch Water resistant. 15 Amps at 12V. Display packed. Fits 1/2" hole, dash thickness: 3/8". Circuit Action SDG SPST...On/Off SDG SPST...Mom. On/Off SDG DPDT...On/Off/On SDG DPDT...Mom. On/Off/Mom. On SDG SPDT...Mom. On/Off/On Illuminated Red Toggle 15 amp at 12V - fits 1/2 hole. Display pack. Circuit Action SDG SPST...On/Off Illuminating Toggle Switch Stamped brass molded bakelite. 15 amp. 12 volt. Display pack. SDG Switch Toggle Illum Illuminating Rocker Switch Stamped brass/injection molded nylon/polycarbonate. SPDT circuit - mom. On/Off mom. On. Lens color: Red/Yellow - 15 amp - 12 volt. Dimensions: Length: 1-7/16" - Height: 7/8". Ignition Switch 3 position, Off-Ignition-Start. Max panel thickness 1-1/8". Display packed. Terminal Cap SDG Screw..No Magneto Style Ignition Switch 3 positions: Off/Ignition/Start. SDG Switch Rocker M-On/ Off/ M-On Terminal SDG Screw

35 Sea Dog Switches 75 3 Position Ignition Switch Polypropylene - off-ignition-start, action. Shaft type: Long - Terminal type: 3 screw. Cap - Color: Black - 2 keys. Display pack. Dimensions: Cut out dia: 13/16" - Max panel: 1-1/8". Horn Button Nylon, phenolic & chrome plated brass. 15 amp. Color: red or black. Dash thickness: 5/16" - button dia: 1/2". SDG Switch Ignit 3 Pos DP 4 Position Ignition Switch Polypropylene - Acc.Off-ignition start, action. Shaft type: Long - Terminal type: 4 screw or 4 blade. Cap - 2 keys - Color: Black. Display pack. Dimensions: Cut out dia: 13/16" - Max panel: 1-1/8". SDG Switch Ignit 4 Pos Screw DP SDG Switch Ignit 4 Pos Blade DP Push-Pull Switch On/Off switch - 15 amp. Display pack. SDG " Max.Panel 3 Position Two Circuit Push Pull Pushed in, switch is off. First pull stop: 1st circuit is on. Second pull stop:1st circuit is off, 2nd circuit is on. Display packed. 3 Position 1 Circuit Pushed in, switch is off. Pull to first stop, first circuit is on. Pulled to second stop, both circuits are on. Display pack. Amps SDG Amp SDG SDG Horn Button 15 Amp Red SDG Horn Button 15 Amp Black Momentary Push Button Push button switch. 15 amp. 1" max panel. Display pack. Cap SDG No Cap SDG Black SDG Red Horn Button Chrome plated brass, momentary On. Foot Switch for Anchor Winch Stamped stainless steel/rubber cover. 4-1/2" diameter. Display pack. 25 amp. Switch is normally "off". Momentary "on" when depressed by foot. SDG Foot Switch for Anchor Winch Rocker Switch Stamped brass/injection molded nylon polycarbonate. On/Off - 15 amp - 12 volt - SPST circuit. Dimensions: 1/2" W x 1-1/8" L. SDG Rocker Switch On/Off SDG Rocker Switch On/Off DP SDG Rocker Switch On/Off/On DP Heavy Duty On/Off Switch Injection molded, comes with cap. 500 amp momentary & 75 amp continuous. Removeable key adds security. Display pack. SDG Horn Button, Display pack. Toggle Switch On-Off toggle switch. Display pack. Circuit SDG SPST Toggle Switch On-Off, brass case, 15 amp. Circuit SDG SPST SDG Cap Safety Tether Switch Circuit normally open. Clip is removed then circuit closes. SDG Kill Switch Kill Switch - Universal Stamped brass/injection molded nylon & delrin. Dual circuitry for either ignition kill or magneto kill. Warning test switch for proper function before each use. Dash thickness: 7/8" - thread dia. 5/8". Display pack. SDG Switch Kill Universal SDG Lanyard Only for Kill Switch SDG Switch On/Off W/Cap

36 76 Blue Seas Cable Clams Perfect for antenna installation. Waterproof coaxial installation with out removing connectors. Save expense of removing/replacing connectors. Use 1001 for GPS, 1002 for VHF, and 1003 for radar antenna cables. BLS Cable Clam.625 Opening BLS Cable Clam.834 Opening BLS Cable Clam Opening 150 Amp Common Bus Bars Stud design for direct terminal to bus contact, low resist connection. Stainless steel studs for high torquing/excellent electrical contact. Tin plated copper bus - max conductivity/resistance to corrosion. UV 94-VO rated (self extinguishing) base material resists high heat. BLS Busbar 4 x 1/4 Stud Terminal Power Post High Amperage Cable Connector Amp flow between terminals stacked on post is determined by wire/terminals used. Voltage rating 48 volts DC max. Base material glass-reinforced nylon. BLS Power Post 5/16 Stud BLS Power Post 3/8 Stud 100 Amp Common Bus Bar Continuous amp: 100 amps AC/DC. Voltage rating: 300 volts AC max - 48 volts DC max. Bus material: tin plated copper CDA 110/UNS Base material ABS. BLS Minibus 5x8-32 Screw Terminal Power Post High Amp Cable Connector Amp flow between terminals stacked on post is determined by wire/terminals used. Voltage rating: 48 volts DC max. Base material glass-reinforced nylon. BLS Power Post #10 Stud BLS Power Post 1/4 Stud Mini Bus 100 Amp Common Bus Bar Continuous amp: 100 amps AC/DC. Voltage rating 300 volts AC max. 48 volts DC max. BLS Minibus 4 x Stud Common Power Bar 600 Amp Cable Connector Continuous 545 amps AC amp DC. 300 volts AC max voltage rating. 48 volts DC max electrical connectors. Bus material is tin-plated copper CDA 110/UNS MaxiBus 250 Amps Common Bus Bar Continuous amps 250 amps AC/DC. Voltage rating: 300 volts AC max. 48 volts DC max. Bus material tin plated copper CDA 110/UNS BLS Power Bar 600 Amp Bus BLS Maxibus Common Bus 4x5/16 Stud 150 Amp Common Bus Bars Continuous amp: 130 amps AC -150 amps DC. Voltage rating: 300 volts AC max - 48 volts DC max. Bus material: tin plated copper CDA 110/UNS BLS Busbar 20x8-32 Screw Terminal Terminal Block 30 Amp Closed back completely insulates power from mount surface. Each screw pair is one isolated circuit. Jumpers allow creation of common circuits. BLS2506 Terminal Block 6 Position 30A BLS2508 Terminal Block 8 Position 30A BLS2510 Terminal Block 10 Position 30A DualBus 100 Amp Common Bus Bars Continuous amp: 100 amps AC/DC. Voltage rating: 300 volts AC max - 48 volts DC max. Bus material: tin-plated copper CDA 110/UNS BLS Dualbus 5x8-32 Screw Terminal BLS Dualbus 10x8-32 Screw Terminal

37 Blue Seas 77 Cover for 2104 Power Bar Cover material is ABS. BLS Cover Connector Power Bar Toggle Guard Protects circuit breakers from accidental switching on or off. Fits all world or A-series single pole circuit breakers. Fits all panel switches. Used on any brand of circuit breaker panel: with standard toggle type circuit breakers. Uses circuit breaker mounting screw holes. BLS Guard For Toggle Switch Dual Bus Plus Combines neg/pos buses on 1 block. Clear polycarbonate cover snaps on. Meets CG/ABYC insulation requirement. Continuous amp: 130 amps AC amps DC. Volt rating: 300 volts AC max - 48 volts DC max. BLS Dualbus Plus 1/4 Stud BLS Dualbus Plus 5/16 Stud Weather Deck Water Resistant Fuse Panel Flybridge/open cockpit applications. Constructed from corrosion resistant materials. Independent label backlight circuit, remote switch/dim. Compatible with all Blue Sea Systems digital dimmers. Faceplate is UV stabilized & weather resistant. Rated IP67 - temporary immersion. Rugged UV stabilized waterproof boots protect toggle switch. Each panel is mountable in 4 different orientations. BLS Panel 12V DC Fused 4 Pos Gray BLS Panel 12V DC Fused 4 Pos Wht Rotating Cable Caps Top rotates 360 for cable entry from any angle. For batteries with integral marine wing nut posts. BLS Cable Cap Rotating Red/Bk Pr Weather Deck Water Resistant Fuse Panel 6-Position 6 position, switch type on/off toggle. Max voltage - 12 volt DC - amp rate per/circuit -15 amp. Switch rating: 15 amp max. Backlight: 12 volt DC nominal & 10 amp per circuit. Fuse type ATO/ATC auto blade type. Fuses installed 15 amp per circuit. Fuses avail.1-40 Amp. BLS Panel WD 12V DC Fused 6 Pos Gray BLS Panel WD 12V DC Fused 6 Pos Wht Cable Cap Stud Insulators Use insulate stud type connectors on: alternators/starters/windlasses/high amp devices. BLS Cable Cap Red Wire BLS Cable Cap Red 8-4 Wire SEA Fuse Block Most economical system for amp fusing. Supplied terminal boots insulate all conductive parts: Satisfies ABYC/USCG regs. For use on systems up to 32V DC. 5/16 stud terminals accept wire ring terminals up to 2/0 AWG. BLS Block For Mega Fuse A Panel Back - Circuit Breaker Insulating Covers Provides electrical insulation for exposed panel backs. Mechanical protection for panel backs protruding into lockers. Light weight material is easily drilled for wire entrance/exit. Isolation covers meet ABYC regs. for AC separation on panels with combo AC/DC. BLS Panelback 5 1/4 x 3 3/4 x 3 BLS Panelback 5 1/4 x 7 1/2 x 3 BLS Panelback 7 1/2 x 10 1/2 x 3 ANL Fuse Block Amp 300 amp rating, use on systems up to 32VDC. Large stud: 5/16 accepts wire ring terminals to 2/0 AWG. Insulating terminal boots satisfies ABYC/USCG regs. BLS Fuse Block Anl 250 Amp

38 78 Blue Seas MAXI Fuse Block Most economical fuse block for amp fusing. Snap on terminal cover insulates-conductive parts: Complies with ABYC/USCG regs. Accepts wire sizes: 18-4 AWG from sides/bottom. Use on systems up to 32 volts DC. BLS Fuse Block Maxi ST* Blade Fuse Block - 12 Circuit with Neg Bus 12 circuit with neg bus. Cover insulates all conductive parts. Tin plated copper buses/fuse clips - 30 amp - rate per circuit. Accepts ATO/ATC fast acting blade type fuses. Clear insulating cover with label recess for small format labels. Satisfies ABYC/USCG regs. BLS Fuse Block A to 12 Circ with Grnd ST* Glass Fuse Block with Negative Bus Clear cover with label recess for Blue Sea Systems labels. Cover insulates conductive parts & stores spare fuses. 30 amp per circuit. Tin plated copper buses, phosphor bronze fuse clips. Meets ABYC/USCG regs. Accepts AGC (Fast Acting) MDL (Time-Delay). BLS Fuse Block 3AG DC 6 Circuit IST* Glass Fuse Block with out Negative Bus Tin plated copper buses, phosphor bronze fuse clips 30 amp rate per circuit. Cover insulates all conductive parts and stores spare fuses: Satisfies ABYC/USCG regs. Clear insulating cover with label recess. Accepts AGC (Fast Acting) MDL (Time-Delay). BLS Fuse Block AGC 6 Circuit ST* Blade Fuse Block - 6 Circuit with Neg Bus 6 circuits - negative bus - 30 amp rate per circuit. Tin plated copper buses/fuse clips. Accepts ATO/ATC fast acting blade type fuses. Cover insulates all conductive parts. Clear insulating cover with label recess for small labels. Satisfies ABYC/USCG regs. BLS Fuse Block A to 6 Circ with Grnd SEA Fuses Most economical fuse for 100 & 150 amp circuit protection. Interrupt rating: 2, max volt 32DC. BLS Fuse Mega 100 Amp 32 Volt BLS Fuse Mega 150 Amp 32 Volt Class T Fuses Amps Extremely fast short circuit response. 20,000 amp interrupt capacity (AIC). UL listed to standard DC tested to UL standard 198L. BLS Fuse JJN Class T 300 Amp BLS Fuse JJN Class T 350 Amp BLS Fuse JJN Class T 400 Amp ANL Fuses Ignition protected, safely install on gas powered boats. Tin plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 amp interrupt capacity (AIC). ABYC reqs main DC circuit protection on large battery banks. Use with Blue Sea Systems ANL fuse blocks. BLS Fuse ANL 50 Amp BLS Fuse ANL 60 Amp BLS Fuse ANL 80 Amp BLS Fuse ANL 100 Amp BLS Fuse ANL 130 Amp BLS Fuse ANL 150 Amp BLS Fuse ANL 175 Amp BLS Fuse ANL 200 Amp BLS Fuse ANL 225 Amp BLS Fuse ANL 250 Amp BLS Fuse ANL 275 Amp BLS Fuse ANL 300 Amp BLS Fuse ANL 325 Amp BLS Fuse ANL 350 Amp BLS Fuse ANL 400 Amp BLS Fuse ANL 500 Amp

39 Blue Seas 79 MAXI Fuses Tin plated connector blades, corrosion resistance. Visible indication of blown condition. Sold in packs of 2. BLS Fuse Maxi 30 Amp BLS Fuse Maxi 40 Amp BLS Fuse Maxi 50 Amp BLS Fuse Maxi 60 Amp BLS Fuse Maxi 70 Amp BLS Fuse Maxi 80 Amp Hi-Amp Circuit Breaker Trim Bezel Trim bezel for 70xx series circuit breaker. Self trimming molded rubber. BLS Bezel Mount Panel 185 Thermal Circuit Breaker - Panel Mount Ignition protected, safely install on gas powered boats. Meet SAE J1171 external ignition protection regs. Weather resistant. Combines switching/circuit breaker function into one unit. Trip free cannot be held closed after trip. BLS Circuit Breaker 100 Amp BLS Circuit Breaker 150 Amp Push Button Reset Only Circuit Breakers Push to reset operation/part of water resist circuit breaker. Compact for high density circuit protection configurations. Trip free cannot be held on in fault current condition. Ignition protected, safely install aboard gas powered boats. BLS Circuit Breaker 5 Amp BLS Circuit Breaker 10 Amp BLS Circuit Breaker 15 Amp BLS Circuit Breaker 20 Amp AC/DC Single Pole Magnetic Circuit Breakers Industry standard breaker for Blue Sea Systems electrical panels. Combines switching/circuit protection into 1 device. 1 pole, quick trip models, specific for electronics protection. Trip free cannot be held on during fault current condition. Specifications: Circuit breaker type magnetic hydraulic - trip free. Max amp 50 amps. Max voltage: 27 volts AC - 65 volts DC. BLS Circuit Breaker 5 Amp Black BLS Circuit Breaker 5 Amp White BLS Circuit Breaker 10 Amp Black BLS Circuit Breaker 10 Amp White BLS Circuit Breaker 15 Amp Black BLS Circuit Breaker 15 Amp White BLS Circuit Breaker 20 Amp Black BLS Circuit Breaker 20 Amp White BLS Circuit Breaker 25 Amp Black BLS Circuit Breaker 25 Amp White BLS Circuit Breaker 30 Amp Black BLS Circuit Breaker 30 Amp Red BLS Circuit Breaker 30 Amp White BLS Circuit Breaker 40 Amp Black BLS Circuit Breaker 50Amp White 185 Thermal Circuit Breaker Ignition protected, safely install on gas powered boats. Meets SAE J1171 external ignition protection requirements. Weather resistant. Surface mount. Combines switching, circuit breaker function into one unit. Trip free cannot be held closed after trip. BLS Circuit Breaker 50 Amp BLS Circuit Breaker 100 Amp BLS Circuit Breaker 150 Amp BLS Circuit Breaker 40 Amp BLS Circuit Breaker 25 Amp BLS Circuit Breaker 30 Amp BLS Circuit Breaker 80 Amp BLS Circuit Breaker 135 Amp C-Series Toggle Circuit Breaker Overcurrent protection: bow thrusters/inverters/ windlasses. Combo switching/circuit protection in 1 device. "Trip free" cannot be held closed after trip. 25 amp - 1 pole - white switch. Magnetic hydraulic circuit breaker. Operating temp: -40 C to +85 C. BLS Circuit Breaker 25A White

40 80 Blue Seas SI Series - Automatic Charging Relay Automatically combines batteries as charging for 12/24 volt system. Protects as it isolates house loads from engine circuits as engine cranks. 12/24 volt auto ranging voltage input, dual sensing. Hermetically sealed contacts are vapor proof. LED lights on battery combo state, blinks on undervoltage isolation. Waterproof IP67, temporary immersion for 30 minutes. Ignition protected, safely install on gas powered boats. Supports high output alternators up to 120 amps. Clip on cover insulates side & bottom knockouts for power cable. Remote LED available - output indicates relay state away from ACR. Connections: 1/4"x.031 Male quick connect terminals for: Ground/remote/LED/starting interrupt. 3/8"-16 tin plated copper studs - max conductivity/corrosion resist. Accepts 3/8" (m10) ring terminals. 7/8" stud length to accept multiple cable terminals. Accepts 4/0 AWG battery cables. Specifications: 12 Volt 24 Volt Continuous rating 120 Amps 120Amps Intermittent rating 210Amps 210Amps InRush rating 280Amps 280Amps Closed current draw 175mA 115mA Open current draw 15mA 15mA Max cable size 1/0 AWG 1/0AWG Terminal stud size 3/8"-16(M10) 3/8"-16(M10) Maximum torque 140 in-lbs 140 in-lbs Relay contact position Combine (30 sec.) 13.6 Volts 27.2 Volts ( 2 min.) 13.0 Volts 26.0 Volts Open Low (10 sec.) Volts 24.7 Volts (30 sec.) Volts Volts Open High 16.0 Volts 30.0 Volts Certifications & Agency Standards: CE Marked Meets: ISO 8846 ignition protection & UL 1500 & SAEJ1171 external ignition protection regs. DC Analog Voltmeter - 2-3/4 Simple 2-wire connection, 8-16V DC. BLS Solenoid SI Series 120A 12/24V BLS Voltmeter Analog DC Analog Ammeter - 2-3/4 Face Simple 2-wire connection, no other power required. 0-25A DC - Internal shunt. DC Analog Voltmeter - Panel PN 8003 DC analog voltmeter volts DC. 5-1/4" W x 3-3/4" H. 3 position switch for multiple battery banks. Full size 2-3/4 meter. BLS Ammeter DC 0-25A with Int Shunt BLS Test Panel Voltage 3 Bank DC Analog Ammeter - 2-3/4 Face Simple 2-wire connection from shunt: No other power required. Meter senses/powers from shunt connection. Includes DC shunt. BLS Ammeter DC 0-100A + Shunt BLS Ammeter DC 0-200A + Shunt BLS Ammeter DC 0-50A + Shunt IDC 8 Position Panel Pos/Neg/Grounding buses installed fully pre-wired. Includes set of 30 common DC labels. Label backlighting pre-installed. All LEDs installed. Detailed installation instructions & cutout template. Configure for 12/24 volt DC distribute with supplied labels. Panel size: 5-1/4" W x 7-/12" H. BLS Breaker Panel 8 Circuit DC IDC 3 Position Panel Pos/Neg/Grounding buses installed fully pre-wired. Includes set of 30 common DC labels. Label backlighting pre-installed. All LEDs installed. Detailed installation instructions & cutout template. Configure for volt DC with supplied labels. Panel size: 5-1/4" W x 3-3/4" H. BLS Breaker Panel 3 Circuit DC AC Main + 6 Positions Red reverse polarity indicating LED. Hot/Neutral/Safety ground buses installed, fully pre-wired. Label backlighting pre-installed. 1-30A, 3-15A breakers installed. All LEDs installed. Max panel amp: 50 amps. 5-1/4" W x 7-1/2" H. BLS Main Panel AC 6 Position

41 Blue Seas 81 DC Analog Micro Voltmeter with 2 Face Simple 2-wire connection, 8-16V DC. AC Toggle Source Selector 120V AC 30A Provides source selection & circuit protection in 1 unit. 2 double pole AC main circuit breakers with lockout slide. Hot/Neutral/Safety ground buses installed, fully pre-wired. Connecting 1 of 2 different AC sources to 1 circuit. Prevents connecting both AC sources simultaneously. Panel size: 5-1/4" W x 3-3/4" H BLS Voltmeter Micro DC Panel Basic 30 Label Set Adhesive backed labels. BLS Label Kit DC Panel Basic BLS Panel 120V AC 30A Source Select Water Resistant Fuse Panel with 6 Positions Designed for flybridge & open cockpit applications. Water resistant 2 part polyurethane slate gray finish. Installed switch is On-Off. 6 positions with 6 installed contura switches. Water resistant contura switches. On indicating LEDs embedded in switch. Water resistant fuse holders accept: AGC (Fast Acting) / MDL (Slow Blow) glass fuses. Countersunk mounting holes throughout. Heavy 1/8 aluminum material. 5-1/4 W x 7-1/2 H. Water Resistant Fuse Panel with 3 Positions Designed for flybridge & open cockpit applications. Water resistant - 2-part polyurethane slate gray finish. Installed switch is On-Off. 3 positions - 3 installed contura switches. Water resistant contura switches. ON indicating LEDs embedded in switch. Water resistant fuse holders accept: AGC (Fast Acting) / MDL (Slow Blow) glass fuses. Countersunk mounting holes through out. Heavy 1/8 aluminum material. 5-1/4" W x 3-3/4" H. BLS Panel 12V DC Vertical Gray BLS Panel 12V DC Vertical Gry LED Indicator Lights Installed in any Blue Sea Systems circuit breaker panel. Simple push in install/mount in any thickness material. Useful as general indicator and alarm lights. BLS LED Light Amber 11/64 DC BLS LED Light Green 11/64 AC Label Backlight System Easily installed in "Blue Sea Systems" circuit breaker panels. Connects: volt sources via two 6 18 AWG wire leads. Reverse polarity protection built-in. Backlighting included in panel, no kit required. PN 8065 snaps apart for 5 or 3 positions. BLS Backlight Kit Cb Panel 120/12V DC Analog Micro Ammeter with 2 Face Simple 2-wire connection from shunt, no other power required. Meter senses & powers from shunt connection. Includes DC shunt. BLS Ammeter Micro 0-50A Ext Shunt DC 13 Position Positive/negative/grounding buses installed, fully pre-wired A breakers installed. Includes set of 30 common DC labels. Label backlighting pre-installed. All LEDs installed. Detailed installation instructions. 10-1/2" W x 7-1/2" H. 8028, 8-16 volt DC micro voltmeter. 8041, 0-50 amp DC micro ammeter. BLS Panel DC Volt & Ammeter

42 82 Blue Seas AC Main Red reverse polarity indicating LED. Hot/neutral/safety ground buses installed, fully pre-wired. All LEDs installed. 2-5/8" W x 3-3/4" H. Maxi panel amp 50 amps. DC 5 Position Pos/Neg grounding buses installed/pre-wired. Includes set of 30 common DC labels. Label backlighting pre-installed. All LEDs installed. Detailed installation instructions & cutout template. 8028, 8-16 volt DC micro voltmeter. 8041, 0-50 amp DC micro ammeter. Panel size: 5-1/4" W x 7-1/2" H. BLS Panel DC 5 Pos Volt & Ammeter DC 10 Position Panel Pos/Neg grounding buses installed/pre-wired. Includes set of 30 common DC labels. Label backlighting pre-installed, all LEDs installed. Detailed installation instructions & cutout template. 8028, 8-16 volt DC micro voltmeter. 8041, 0-50 amp DC micro ammeter. Panel size: 5-1/4" W x 11-1/4" H. BLS Panel 120V AC 50 Amp Main BLS Panel DC 10 Pos Volt & Ammeter Panel Switches Use: Generator starters, bilge pumps, horns, wipers, engine controls requiring other than On-Off or different pole configuration separate from circuit protection. Panel switches mount in Blue Sea Systems toggle type circuit breaker panels. Supplied with mounting adapter for 5/8 mount hole. Nickel plated brass & phenolic non-corrosive. Rating: 125V AC amps amps. Water Resistant Contura Switch Gray Vibration, shock, thermoshock, moisture & salt spray resist. Specially to mount in Blue Sea Systems water resist panels. BLS Switch Push Button SP ST BLS Switch Toggle Off-On Small Format Panel Labels - Black Tough, weatherproof material. Includes 60 common DC labels. Use: DC water resistant panels or ST blade fuse blocks. BLS Label Kit DC Compact Blk BLS Switch DPDT On-Off-On AC 2 Sources + 12 Positions/DC Main Panel Includes set of 30 common AC & 30 common DC labels. All AC/DC buses installed, fully pre-wired. Label backlighting pre-installed, all LEDs installed. Max panel amperage amperes DC - 50 Amperes AC. AC Features: Transfer switch combines 2 separate AC load groups into 1. Switch lets ammeter/voltmeter read either AC load group. Reverse polarity indicators on both AC load groups. Ready for installation of optional 4031 AC isolation cover. 9353, volt AC voltmeter. 9630, 0-50 amp AC ammeter. DC Features: 100 amp C-Series circuit breaker gives main circuit protection/switching for DC branch circuits. 8003, 8-16 volt DC voltmeter. 8017, amp DC ammeter. BLS Panel 120V AC / 12V DC Water Resistant Contura Switch - Gray Vibration, shock, thermoshock, moisture & salt spray resist. Specially to mount in "Blue Sea Systems" water resist panels. Ignition protected - safe to install aboard gas powered boats. Meets UL1500 & ISO8846 ignition protection regs. BLS Switch Con SPST Off-On BLS Switch Con SPST Off-On BLS Switch Con SPDT On-Off-On BLS Switch Con SPDTOn-Off-On DC Analog Voltmeter - 2-3/4 Simple 2 wire connection. BLS Meter Analog 18-32V

43 Blue Seas 83 Shunt Shifter Shunt adapter for DC digital ammeter positive side shunt. For apps. like alternator measurement. Shunt shifter use with Blue Sea Systems pn 8255 digital meter shunt. Tech. shifts shunt s pos reference to neg required by digital meters. Easily installs directly onto shunt using existing sense screws. Ideal for use with volt DC systems. BLS Shunt Shifter Water Resistant Circuit Breaker Panel - White Flybridge & open cockpit applications - water resistant. Ignition protected, safely install on gas powered boats. 6 positions - 6 installed contura switches. Push button circuit breaker with waterproof boot. Heavy 1/8 aluminum - 2-part polyurethane white finish. Water resist contura switches on LEDs in switch. Wired/ready to install - countersunk mount holes. Includes set of 60 common DC labels. Meets UL1500 and ISO 8846 ignition protection requirements panel size: 4-1/2" W x 7-1/2" H, 8274 panel size: 4-1/2" W x 3-3/4" H. Vertical mount. BLS Panel 12V DC 6 Pos White BLS Panel 12V DC 3 Pos White Water Resistant Fuse Panel 8 Position Designed for flybridge & open cockpit applications. Water resistant fuse holders accept commonly available AGC (Fast Acting) and MDL (Slow Blow) glass fuses. Installed switch is On-Off. 8 positions, 8 installed contura switches. Countersunk mounting holes throughout. Heavy 1/8 aluminum material. 9-3/8" W x 3-3/4" H. Two part polyurethane slate gray finish. Water resistant contura switches. BLS Panel 12V DC Horizon Water Resistant Contura Switch-Black Vibration, shock, thermoshock, moisture, & salt spray resistant. Specially to mount in "Blue Sea Systems" water resist panel. Ignition protected, safely install on gas powered boats. Meets UL1500 & ISO8846 ignition protection regs. BLS Switch Con Spst Off-On Black BLS Switch Con Spdt On-Off-On Bk BLS Switch Con Dpdt On-Off-On BLS Switch Con Spst Off-On Water Resistant Fuse Panel 4 Position Designed for flybridge & open cockpit applications. Water resistant fuse holders accept commonly available AGC (Fast Acting) and MDL (Slow Blow) glass fuses. Installed switch is On-Off. Four positions, four installed Contura switches. Countersunk mounting holes throughout. Heavy 1/8 aluminum material. 5-1/4" W x 3-3/4" H. Two part polyurethane slate gray finish. Water resistant contura switches. ON indicating LEDs embedded in switch. BLS Panel 12v DC Horiz Water Resistant Circuit Breaker Panel - Black Flybridge & open cockpit applications - water resistant. Ignition protected - safely install on gas powered boats. 6 positions - 6 installed contura switches. Push button circuit breaker with waterproof boot. Heavy 1/8 aluminum - 2-part polyurethane black finish. Water resist contura switches - On LEDs in switch. Installed switch is on-off, watertight mount gasket. Wired ready to install, countersunk mount holes. Includes set of 60 common DC labels. Meets UL 1500 & ISO 8846 ignition protection regs panel size: 4-1/2" W x 7-1/2" H, 8374 panel size: 4-1/2" W x 3-3/4" H. Vertical mount. BLS Panel 12V DC 6 Pos Black BLS Panel 12V DC 3 Pos Black

44 84 Blue Seas DC 10 Position Breaker Panel Pos/neg grounding buses installed/pre-wired. Includes set of 30 common DC labels. Label backlighting pre-installed, all LEDs installed. Detailed installation instructions & cutout template DC digital multimeter with alarm. Configure: volts DC distribution with supplied labels. Panel size: 5-1/4" W x 11-1/4" H. BLS Panel Digital Meter AC Main + 8 Positions Red, reverse polarity indicating LED. Hot/neutral safety ground buses installed/pre-wired. Label backlighting pre-installed, all LEDs installed. Blue Seas 8247, AC digital multimeter with alarm. Max panel amps, 50 amperes. Panel size: 5-1/4" W x 11-1/4" H. BLS Panel Digital Meter Magnetic AC/DC Breakers Fits 9/16" center toggle hole. Screw holes 1-5/8" center-center. Available with black/white toggle. Display pack. Amps Color SDG Black SDG Black SDG Black SDG Black SDG Black SDG Black SDG Black SDG Black SDG Black SDG White SDG White SDG White SDG White SDG White SDG White Thermal AC/DC Breaker Uses 7/16 center hole. Display pack. Amps SDG SDG SDG SDG SDG SDG Terminal Block Jumpers Jumpers create common circuits on independent connectors. BLS Jumper Terminal 2600 Series BLS Jumper Terminal 2500 Series BLS Jumper Terminal 2400 Series Fuse Hole In Cap Stamped brass/molded bakelite. Display pack. Fused Terminal Block Uses 1/4" x 1-1/4" fuse. Display pack. SDG SDG SDG Push-in Cap SDG Screw-in Cap Fuse Holder Fuse holder with bus bar. Holds standard 1/4" x 1-1/4" fuses. Display packed. Terminals SDG SDG SDG Terminals Mini Thermal Circuit Breaker Stamped brass/molded bakelite. Various amps see below. Color: Black. Dimensions: Height: 1-1/8" - Stem width: 7/16". Precision Analog Meters Molded bakelite & acrylic volt DC. Display pack. Length: 2-13/16" - height: 2-3/8" - depth: 2". Battery Test Panel Test charge on 1 or 2 batteries. Cut out size 1-3/4" x 2-9/16". Display packed. Width Height SDG /4"...2-1/2" Bilge Water - Alarm Panel Stamped anodized aluminum. Display pack. Audible & visual warning indication: (Water is above bilge pump float switch level.) Length: 4-1/2" - Height: 4-7/8". SDG420810M-1...Mini Thermal Circuit Breaker 10 Amp SDG420815M-1...Mini Thermal Circuit Breaker 15 Amp SDG420820M-1...Mini Thermal Circuit Breaker 20 Amp SDG Voltmeter SDG Bilge Water Alarm

45 Aluminum Vertical Switch Panel Illuminating Switches. Display pack. 4 circuit fuse panel. A B C D No. of Switches SDG "...4-1/2" /16".3-1/2"...4 SDG Replacement Fuse Holder SDG Replacement Rocker Switch Switch Panel 85 Aluminum Vertical Switch Panel Illuminating Switches. Display pack. 6 circuit fuse panel. 20 amp, 12 volt on SDG A B C D No. of Switches Weight SDG /2"...4-1/2"...5-1/2"...3-1/2"...6 SDG Replacement Fuse Holder SDG Replacement Rocker Switch Aluminum Horizontal Switch Panel Illuminating switches, 6 circuits. Display pack. A B C D No. of Switches SDG /2"...6-1/2"...3-1/2"...5-1/2"...6 SDG Replacement Fuse Holder SDG Replacement Rocker Switch Aluminum Breaker Panel Illuminating Switches. Display pack. Supplied with: 2-3 amp, 2-6 amp & 1-10 amp thermal AC/DC breakers. A B C D No. of Switches SDG /2"...4-1/2"...5-1/2"...3-1/2"...6 SDG Replacement Rocker Switch Seadog Decal Sheet Number of Decals Individual Sticker Width Individual Sticker Height Weight Pk. SDGOP (including 3 blanks) ".365".01 lb. 1 ea. AC MAIN SHORE BILGE PUMP AIR COND. BOW LIGHT RUNNING LIGHTS HEATER COCKPIT LIGHTS CABIN LIGHTS STBD. INSTRUMENTS 32 VDC MAIN 24 VDC MAIN ENG, ROOM LIGHTS REFRIG. DEPTH SOUNDER WIND INSTRUMENT GAS VALVE HORN AC OUTLETS INSTRUMENT LIGHTS HEAD MASTHEAD LIGHTS ANCHOR LIGHT SUMP PUMP ACCESSORIES CABIN LIGHTS FORE DECK LIGHTS BLOWER COMPASS LIGHT SEARCH LIGHTS DC POWER SHOWER PUMP WINDLASS 24 VDC OUTLETS FANS NAVIGATION LIGHTS REVERSED POLARITY STEREO / TV SPARE (2 labels) AC POWER ENGINE RM. BLOWER LORAN BATTERY CHARGER CABIN LIGHTS PORT DECK LIGHTS 12 VDC MAIN IGNITION SPREADER LIGHTS RADAR 32 VDC OUTLETS 12 VDC OUTLETS OUTLET STBD. OUTLET PORT KNOTMETER WATER HEATER VHF R/T RADIO

46 86 Master Control Panel AC/DC Accessory Panel 7 Circuit Versatile panels use as either 120 VAC branch panel or AC/DC circuit breaker panel. Necessary power control functions for most yachts & small craft. Model SDG423340: Complete with circuit label decals & instructions. Special combinations of breakers to form any AC/DC circuit panel with or without a separate main breaker. Model SDG423341: Provides 120 VAC branch circuit distribution in most yachts & small boats. Allows 2 additional circuits without modification. Included with each panel: One 30 amp double pole breaker - 1 each 10 amp. 1 each 15 amp - 1 each 20 amp single pole breaker. Circuit label decal sheet. Model SDG423342: (Shown) Provides 7 separate circuit breaker protected circuits. Used alone or in conjunction with any other Sea-Dog AC/DC control panels. Panel allows added circuits without modification. 5 breakers installed: 2 each 5 amp - 1 each 10 amp. 1 each 15 amp - 1 each 20 amp. Circuit labels included with panel. A B C D Main Breaker Breakers Weight SDG (Not Pictured)...7-1/2"...5-1/4"...6-1/2" 4-1/4" None None.71lb. SDG (Not Pictured)...7-1/2"...5-1/4"...6-1/2" 4-1/4" 30 Amp 3 AC/DC 1.36 SDG /2"...5-1/4"...6-1/2" 4-1/4" None 5 AC/DC.71 Master Control Panel with Battery Test Basic control panel is for most DC use applications. Total circuit availability. Monitors 2 batteries up to 7 breakers. Model SDG323412: Completely wired & designed for 12 volt DC electrical systems. Gauges: One 8-16 volt DC expanded scale, high accuracy voltmeter. One 0-50 amp DC ampmeter. Requires a shunt: 50 MV/100A. Panel includes: 2 each 5 amp - 1 each 10 amp, 1 each 15 amp - 1 each 20 amp single pole breakers. 2 additional circuit breakers can be added to total 7 protected circuits. Circuit decals shown are from label sheet included with panel. Maine Breaker Breakers Weight None 5 AC/DC 2.39 A B C D SDG " /2"...6-5/16"...9" Horizontal 6-Gang Panel Fire resistant injection molded nylon 6 illuminating switches. Panel rating: 12 volts, 37 amps total. Color: Black. Individual circuit: 10 amps maximum. Meets CE specs. To customize to your set up, a set of preprinted labels is included. Dimensions: Length: 6-7/16" - Height: 4-1/2". Cut out: Length: 5-1/2" - Height: 3-5/8". Display pack. SDG Switch Panel 6 Gang Horiz DP

47 Panels 87 Switch Panel Fire resistant injection molded nylon. Illuminated switches - 10 amp. Display pack. Splash guards on SDG & SDG # Switches SDG Switch Panel 4 Gang Vert SDG Panel 4 Gang Vert with Splash Guard SDG Panel 6 Gang Vert with Splash Guard Compact 6 Way Switch Panels Attractive design - plastic housing. Protected with neoprene rubber boots. Green LED backlit labels. Red LED indicates system is on. 6 On/Off rocker switches. Current rate: 20 amp DC - 10 amp AC. Max load 12 volt - 20 amp. Removable cover plate conceals screws. Label set & caps to cover left side screws. Dimensions: H 158 x W 112 x D 65 mm. HEL Panel 6 Way Splash Proof Illum Main Breaker Panel Provides AC main circuit protection for most mid-sized yachts & small boats. Added protection to completely disconnect all power from onboard AC circuits. Model SDG423132: Assembled with a 30 amp 2 pole breaker. A B C D SDG /4"...5-1/4"...2-3/4"...4-3/16" AC/DC Accessory Panel 3 Circuit Small panel ideal for small electrical regs. or add to other Sea Dog panels if more circuits required for up to 3 separate circuits. Model SDG423142: Assembled with 3 breakers installed: 1-5A, 1-10 A, & 1-15A. Circuit labels from decal sheet included with panel. A B C D SDG /4"...5-1/4"...2-3/4"...4-3/16"

48 88 Misc. Bilge Pump Switch Injection molded ABS. Corrosion resistant - max durability. Illuminating on/off switch. Display packed. Can be back lit, displays "bilge pump" for easy location. SDG Switch Bilge Pump with Fuse 20 Amp Deluxe versions also feature: 3 way switch for auto & manual mode. Display packed. Auto mode has green light - manual mode has red light. UL listed 20 amp circuit breaker, quick reset of system. SDG Switch Bilge Pump with Cir Brk SDG Switch Bilge 20 Amp with Splash Guard Bus Bar Stamped brass & molded bakelite. Display pack. SDG SDG Terminals Terminal Blocks Junction individual feed. Display pack. Moisture repellant bakelite insulator base with barrier strips. Nickle plated terminal links & 8-32 binding head screws. Dimensions: 1.31" W x.67" H. # Length COHM427...Term Junc Block 6 Gang 4.33 COHM428...Term Junc Block 8 Gang 5.46 COHM429...Term Junc Blck 10 Gang 6.59 Chrome Cable Outlet Chrome plated brass. Display pack. Hole Cable SDG /4"...RG58 SDG /16"...RG8X SDG /8"...RG8U ATO/ATC Fuse Panels Common negative bus with "push-on" tabs. Common positive feed. Each branch handles up to 30 amps (160 amp max total). 6 or 12 gang. ANC ATO/ATC Fuse Panel 6 Circ ANC ATO/ATC Fuse Panel 12 Circ Battery Clips Copper plated steel, rated at 10 amp. 1 pair per display pack. SDG " Length ATC Fuse Holder In line ATC type fuse holder. ANC In Line Fuse Terminal Block Stamped brass & molded bakelite. Display packed. Amp Terminals SDG SDG SDG SDG ANL Fuse Holder Nylon/Brass. Display packed. Includes cover to meet ABYC/USCG reg. Fuse not included (# ). #Overall length: 7" - Width: 2". SDG Fuse Holder ANL Combination Bus Bar Display pack. Stamped brass/molded bakelite. 100 amp - max of 48 volts DC. Separate bus strips for negative/positive connection. Gang Terminal SDG Bus Bar Combo SDG Bus Bar Combo In Line Fuseholder Molded plastic. Rated for 20 amps at 12 volts. For 1/4" x 1-1/4" fuses. Complete with 12 volt, 20 amps fuse & 7-1/2" wire lead. PRK786DP...In Line Fuseholder

49 Fuses 89 Marine Fuses Amps Fuse Style Qty/Pkg ANC AGC...5 ANC /2...AGC...5 ANC AGC...5 ANC /2...AGC...5 ANC AGC...5 ANC AGC...5 ANC AGC...5 ANC /2...AGC...5 ANC AGC...5 ANC AGC...5 ANC AGC...5 ANC AGC...5 ANC AGC...5 ANC Asst...AGC...41 ANC MDL...2 Watertight Inline Fuse Snap tight connection. Use in wet or semi-wet locations. Includes fuse. Display packed. Amp Wire Ga SDG SDG SDG SDG SDG Inline Fuse Includes 20 amp fuse. Display pack. Wire SDG " Marine Fuses Amps Fuse Style Qty/Pkg ANC ATC...2 ANC ATC...2 ANC ATC...2 ANC ATC...2 ANC ATC...2 ANC ATC...2 Mega Inline Fuse 225 amps. Display packed. Overall length: 2-11/16" - Width: 5/8". SDG Fuse Inline Mega 225A Dimensions - Glass Tube Fuses Style Dia. Length AGC...1/4"...1-1/4" MDL...1/4"...1-1/4" AGU...13/32"...1-1/2" AGA...1/4"...5/8" GMA...5mm...20mm Waterproof Fuse Holder In line fuse holder. 30 amp max. ANC Fuse Holder In-Line Fuse Holder 12 gauge wire, 30 amp max. Fuse Type ANC AGC ANCOR Full line of corrosion resistant fuses. Protects sensitive marine electronics. Tested twice to ensure reliable protection. Added safety benefit of being constructed with enclosed glass tube. Fast acting fuses (AGC style) open quickly/protect circuits from overloads. Short circuits & time delay fuses (MDL style) temporary, harmless in rush currents to pass. Open on sustained overloads & short-circuits (motors, etc.).

50 90 Tools & Inverters Circuit Tester - Low Voltage Test 6 & 12 volt systems. Check ground connection & voltage. Tester bulb lights if ground and volts are present. REL67...Circuit Teaster 12V Heavy Duty Cable Cutter Precision ground/sharpened blades, high-strength steel. Longer handle for easier cuts with less strain. Lightweight fiberglass handles feature comfy rubber grips. Cuts up to 350 MCM (2 sizes larger than 4/0 AWG cable). Cuts non-ferrous cables up to 350 MCM /177 mm. ANC Cable Cutter Cut / Strip / Crimp Tool Precision ground cutters & stripping station. Wide crimp range of insulated/non-insulated terminals. Box crimp works with Ancor double crimp terminals. Marking is embossed & paint filled. Crimps AWG. 2 insulated/non-insulated terminals, connectors/spark plug terminals in special cavities. Strips insulation off AWG mm 2 solid/stranded wires. ANC Crimper ANC Stripper Crimper SS Heavy Duty Lug / Terminal Crimper Calibrated adjustment screw. Compound lever action prevents operator fatigue. Capacity: Crimps 8-4/0 AWG /8-103 mm - 2 lugs/terminals. ANC Lug Crimper Cobra Power Inverter Watt 400 watt continuous watt surge. Direct to battery cables - carrying case. Cigarette lighter plug and USB output. COBCPI475...Inverter 400 Watt Heavy Duty Lug Crimper Made from steel with hardened pivot pin. Spring loaded pivot bar. Use with hammer or vise. Crimps: 6-4/0 AWG / mm 2 lugs & 6-3/0 AWG /13-81 mm 2 terminals. Makes UL approved crimps. ANC Lug Crimper Double Crimp Ratchet Tool All-in-one motion for superior strain relief. Ratchet crimps stranding/insulation. Grip portion of connector tool has adjust feature for wear. Release lever in event of incorrectly placed terminal. Crimps AWG insulated terminals in 3 cavities. ANC Professional Crimper Cobra Power Inverter Watt 1500 watt continuous watt surge. Remote on/off capable - USB output. LED function - Status meter. COBCPI Inverter 1500 Watt Cobra Power Inverter Watt 2500 watt continuous watt surge. Remote on/off capable - USB output. LED function - Status meter. Cobra Power Inverter Watt 800 watt continuous watt surge. Direct to battery cables - carrying case. USB output. COBCPI Inverter 2500Watt COBCPI875...Inverter 800 Watt

51 Shakespeare Antennas 91 DGPS Beacon Antenna Galaxy antenna specially designed to receive differential beacon broadcasts. Permits tighter positional fixes using GPS. Differential GPS receivers take additional signals into account when calculating Lat-Lon position from GPS satellite. One section 4' antenna with brass & copper elements. Stainless ferrule. SHK ' Differential GPS Cellular Antenna Collinear phased 1/2 wave elements. Dual hand soldered brass choking sleeves eliminate pattern distortion of cable radiation. Brass/copper radiators for extra high efficiency deck mount. 409 or 410 mounting kit & 4008 extension mast for a 12' antenna. Chrome plated brass ferrule 48" overall length. SHK5410XT Dual Band Cellular Antenna Galaxy 5237 antenna covers digital/analog & PCS cell phone bands. Brass & copper elements to increase range. Includes 25' Lo-Max Low loss cable. Frequency: Dual band 800/900 MHZ & 1900 MHz. SHK5237XT...8' Dual Cellular 2 Ft Wi-Fi Galaxy Antenna 8dB gain - Sturdy Shakespeare antenna brings Wi-Fi to marine environments. Hi-tech PCB copper elements. High gloss, non yellowing polyurethane finish. Stainless steel ferule with standard 1" 14-threads. Special sleeve collar design. Female "N" connector in antenna. Suggested mount: Shakespeare. Style: 4187, 5187, 4188-S or Features: Max power input: 25 watts No DC grounding. Bandwidth: 80MHZ within Frequency: GHz SHK Antenna WI-FI 2 Galaxy 2.4GHZ 14" Omnidirectional Marine TV Antenna Smaller antenna where style & size are factors. Perfect for close in strong signal areas. System includes antenna with built-in pre-amp. AC/DC power supply - 30' coax. 14" in dia. 21" Omidirectional - Antenna Max performance in marine environment. System includes: antenna with built in pre-amp. AC/DC power supply. 30' ultra low loss RG-59 coax & F connector. SHK2020G...TV Antenna SHK2030G...21" TV Antenna

52 92 VHF Antenna Center fed 1/2 wave coaxial sleeve antenna. Outstanding, basic 3 db antenna reduces signal fading in rough seas. Most widely used antenna on Coast Guard vessels. Use with a 4187 ratchet mount. White Shakespeare fiberglass. Brass and copper elements. Deluxe chrome plated brass ferrule. One section, 5' overall length. SHK396-1 Shakespeare VHF & Loran Antennas Navigator - Loran Antenna 8' fiberglass whip (formerly 10-3). 3/8"-24 thread chromed brass ferrule. Recommended by Loran manufacturers. White Shakespeare fiberglass. 1 section. SHK4208 SKIPPER - VHF Antenna Center fed 1/2 wave coaxial sleeve antenna. Most economical package, basic 3 db antenna. Steady cruising calm, moderate seas. Polycarbonate lift & lay mount for deck mount. Leveling plate & installation hardware included. White Shakespeare fiberglass. Brass & copper elements, polycarb ferrule. One section - 5' overall length. SHK420 Galaxy VHF Antenna Rugged professional quality, exclusive hand crafted finish. 17'6" VHF antenna - phased 1/2 wave elements. Stacked in collinear array. Coaxial choking sleeve suppresses cable radiation. Long distance, stays erect in high seas, yet very light weight. 409 or 410 mounting kit for deck or side mounting. SHK5018 Commercial VHF Antenna Ultimate seagoing/land antenna, gets through if all others fail. Unique design puts signal on horizon for gain in all directions. Phased 1/2 wave brass/copper elements. Stacked in collinear array, broadband matching section. Coaxial choking sleeve suppresses cable radiation. 2-3/4" diameter x 26" long 6061-T-6 alum. sleeve. Strap direct to mast 484 wall mount bracket 483 clamp set. 1 section - 21' overall length. SHK476 Centennial VHF Superb value in low priced 8 foot antenna. Brass/copper elements, chromed/brass ferrule. Standard 1"-14 thread. Includes: 15' of RG-58 cable & PL-259 connector. SHK dB VHF Antenna Commercial VHF Antenna 19' long distance. Stays erect in rough seas, very lightweight. Phased 1/2 wave elements, stacked collinear array. Coaxial choking sleeve suppresses cable radiation. 409 or 410 mount kit for deck/side mount. Brass/copper elements. Chrome plated brass ferrules. 2 sections: Base 162" / Tip 66". 19' overall length. Descriptiom SHK Piece Antenna SHK4018M...2 Piece Mast Mount VHF Antenna Collinear phased 5/8 wave elements. Twin to 5205 & 5207 CB antennas. Rugged, quality antenna. Heavier duty. Radome & brass/copper construction - max efficiency & extra range ratchet mounts, or 410 mounting kit & 4008 extension mast for a 16' antenna. White Shakespeare fiberglass. Chrome plated brass ferrule. One section - 8' overall length. SHK5202

53 Shakespeare VHF Antennas Economy VHF Lightweight antenna where range is not dominate factor. 5206CB has chrome plated brass ferrule & 15' of coax. 5206NB has nylon ferrule - twin to SHK5206CB...8 foot VHF SHK5206NB...8 foot VHF Squatty Body VHF Lightweight, low profile antenna. End fed 1/2 wave stainless steel whip. Specially for masthead mounting SO-239 connector. Stainless body, stainless "L"mounting bracket. SHK foot VHF, 3dB Shakespeare #5206-C VHF Antenna End fed antenna with matching stub. Twin to 5205 & 5207 CB antennas. Economical, lightweight self support antenna good connections, if range not main factor deck mount. 410 mounting kit & a 4008 extension mast for a 16' antenna. White Shakespeare fiberglass. Chrome plated brass ferrule. One section - 8' overall length. SHK5206C Same as above with nylon ferrule. Recommended: Style 495 deck mount or Style 4186 ratchet mount. SHK5206N VHF Sailboat Racer Antenna 15" length end fed, center loaded stainless steel whip. Small & super lightweight, built for sailboat racers. 15" center loaded design delivers unity gain. Black stainless steel whip - Gold plated connector. Black "L" bracket for mast mounting. Features: Max power input: 25 watts. SWR: Less than 1.5:1 at MHz Bandwidth: 5 MHZ Frequency: VHF Marine band - No DC grounding. SHK Antenna 15 VHF Sailboat Racer VHF Antenna with Magnetic Mount 19" length base load magnetic mount stainless steel whip. Black magnetic mount. Limited 2 year warranty. SHK Antenna 19 VHF Magnetic Mount Sea Mate 5207 Continuous load, end fed 1/2 wave CB antenna. Chromed brass ferrule with 1"-14 thread. 15' of coax & PL-259 connector (twin to 5206). SHK foot CB Commercial VHF Antenna Ocean Twin 23' VHF marine antenna, 2 piece. Twin to 5308 SSB marine antenna. 9 phased 1/2 wave elements. Stacked in collinear array with choking stub suppresses cable radiation. Band spread matching sleeve. Base ferrule has 14 1" threads. 410 mount kit for deck or side mounting. Brass/copper elements. Two sections: Base 162" / Tip 114". SHK5208R...2 Piece Antenna Galaxy Antenna Collinear phased 5/8 wave elements. Highest quality 8' 6dB gain VHF antenna. 20', low loss RG-8X cable. PL-259 connector, max power transfer deck mount. 410 mounting kit & a 5228 extension mast for a 16' antenna system. Brass and copper elements with chrome plated brass ferrule. One section, 8' overall length. SHK5225XT

54 94 Shakespeare VHF Antennas Low Profile VHF Antenna 36" low profile end fed 1/2 wave antenna. Perfect for bassboats, center console fishing boats, if standard fiberglass antenna hinders or unable to install. Ratchet mount/rail mount with center hole. 15' coax cable exits bottom center of ferrule. Recommended mounts are Shakespeare: 4187, 4189, or db performance. 36" stainless steel whip. 1" - 14 thread chrome plated brass ferrule. SHK5240R AIS Little Giant - Galaxy Antenna 4' VHF AIS 3dB gain. Specially designed to meet the broader bandwidth requirements of all popular AIS transcievers. Brass & copper elements. 20' of RG-8x coax cable. High gloss, non yellowing polyurethane finish. Stainless steel ferule with standard 1" 14-threads. PL-259 connector. 5 year limited warranty. Features: Max power input: 50 watts. SWR: Less than 1.5:1 at MHz Bandwidth: 5 MHZ within VSWR Frequency: VHF Marine band - Has DC grounding. SHK5396AIS...Antenna 4 Galaxy VHF AIS VHF Quick Connect Antenna 36" length low profile end fed 1/2 wave. Stainless steel whip - SO-239 connector. "L" bracket included for mounting to a vertical surface. Coax & PL-259 connector sold separately. One section - Limited 2 year warranty. Press & twist bayonet. Lift-N-Lay Whip VHF Antenna Great value, performance/convenience. Low profile end fed 1/2 wave antenna. 3 foot stainless steel whip that lifts-n-lays down, (out of the way) for fishing, trailering or storage. Sealed, copper wire coil, 36" stainless whip. SO-239 connector. (Coax & PL-259 connector not supplied.) 5247 is same style but has extra heavy duty whip for extra stability at high speeds. SHK5242A...Antenna 3 VHF Quick Disc Whip SHK HD Whip Antenna Little Giant VHF General purpose communications. 4' heavy duty construction. Center fed 1/2 wave coaxial sleeve. Brass & copper elements with a stainless steel ferrule. Includes 20' RG-8/X cable & PL-259 connector. Band width: 5MHz within 2.0 VSWR. SWR less than 1.5:1 at MHz. SHK5400XT...4' VHF Antenna Commercial SSB Whip Antenna Heavy duty primarily for larger commercial vessels demanding peak performance. Conductors running full length. Input power up to 1kw. Chrome plated brass center fittings. Anodized aluminum bottom ferrule. Side feed termination band. 2 sections: base is 192"- tip is 144". Bandwidth within 2.0:1 SWR - resonant frequency 8.4MHZ. SHK foot SSB Antenna "STOAWAY" VHF Antenna Emergency flex antenna loaded 1/4 wave whip. Easy to reach, instant emergency capable if main antenna becomes disabled. Packed in 12" weather resistant, plastic tube. 12' cable, connector, & rubber suction cup for fast, mount to smooth horizontal surface. 10" length - flexible vinyl cover. Velcro strips for storage included. SHK5911

55 Shakespeare CB & AM/FM Antennas / Mast Extensions 95 CB Antenna Marine BIG STICK 1/2 wave coaxial CB antenna provides ultimate performance/durability. Large yacht installation. 409R or 410R mounting kit recommended. Chrome plated brass ferrules. Two sections: base 120" tip 96". 18' overall length. Note: 176-GBS, 176-GBSU or 376-GB for base station installations. SHK176-1 CB Antenna Same as 4050 Little Giant, featuring a 1" nylon ferrule deck mount. SHK4051 LITTLE GIANT CB Antenna For bass boats, fishing boats, when fishing over 3' antenna is more desirable than greater range. Continuous load, end fed, 1/2 wave antenna. Matching cable cannot be cut/altered. Polycarbonate lift/lay mount. Install hardware supplied for mounting on flat surface leveling plate included for mounting on sloping deck. Polycarbonate ferrule, one section. Stock# SHK4050B CB Antenna SALTY MATE Twin to 5202, 5302, or 5206-C VHF antennas. Continuous load, end fed, 1/2 wave antenna. Matching cable cannot be cut or altered. Lengthened with suitable connectors & 50 ohm cable. Coil permanently sealed in Shakespeare's white fiberglass deck mount. 410 Mounting Kit / 4008 extension mast for a 16' antenna. Chrome plated brass ferrule - 8' overall length. Stock# SHK5205 3' AM / FM Stereo Antenna Exclusive distributive load, super signal pulling power. Coil permanently sealed in white fiberglass. Polycarbonate lift/lay mount. Stainless steel hardware for deck mount included. 39" overall length. SHK4350 Shakespeare 4351 Same as 4350 but with 1" - 14 thread nylon ferrule. Use with standard marine antenna mounts. SHK4351 AM / FM / STEREO ANTENNAS Moderate Duty Extension Mast 1" dia. mast for moderate duty applications. Upper section bracket is required. Use with 410 mounting kit. Standard 1"-14 thread. SHK foot Extension SHK foot Extension Extension Mast Stainless steel, heavy duty mast with 1"-14 thread. Length SHK foot SHK foot

56 96 Mast Extensions & Antenna Mounts Extension Mast Heavy duty, lightweight, structurally strong fiberglass. Chrome plated brass ferrule. Standard 1"-14 thread. Use with 409 or 410 mounting kit. SHK foot Extension SHK foot Extension Mounting Kits with Hardware Style 81 stainless swivel mount. 408 molded upper bracket. Insert for 1" and 1-1/2" dia. antennas. SHK410 Lift and Lay Mount Lift and lay mount white polycarbonate. Enables lift and lay with positive snap action. Leveling plate for mounting on sloping deck. Standard 1"-14 male threads. SHK495 Heavy Duty Mast Extension Finished to match Galaxy antennas. Made of high quality Shakespeare white fiberglass. Used to increase height of antenna to improve range & boost placement of antenna to clear obstructions. Stainless upper & lower ferrules. SHK ft, 1-1/2" Dia. Extension SHK ft, 1" Dia. Extension SHK ft, 1" Dia. Extension Ratchet Mount Stainless Steel 4-way ratchet design. Handle for deck or bulkhead mount. Has 9/32" hole for loran cable. Standard 1"-14 male threads. SHK Standard Mount SHK4187HD...Heavy Duty Mount Stainless Swivel Mount Deck/Side mounting when used with upper support bracket. Dual joint & free pivoting, easy lowering of antenna. SHK81S...1"-14 S.S. Mount Swivel Mount Heavy Duty, 4-way Versatile auxiliary mount. Fits almost all mounting locations for antenna lay down in desired direction. Deck or bulkhead mounting when used with stand off bracket. Heavy duty chrome plated brass. Standard 1"-14 male threads. SHK407...Antenna Mount Rail Mount Stainless Steel Ratchet action. Easy install on 7/8" & 1" vertical/horizontal rails. Handles antennas up to 8'. Feed through provision for loran cable. SHK Antenna Rail Mount Economy Rail Mount Nylon adapter fits 7/8", 1" & 1-1/4" rail. Stainless antenna mount. SHK4720 Mounting Kit Versatile 407 heavy duty 4-way swivel mount. 408 insulated stand off bracket. Insert to accept 1" & 1-1/2" dia. antenna or extension masts. Complete with hardware. SHK409 Economy Ratchet Mount Nylon rail mount fits 7/8" & 1" rail. Lever action for lowering antenna. SHK4721

57 Shakespeare & Sea Dog Antenna Accessories 97 Center Pin Splice Easy way to splice coax. Solderless, fretless & botchless. Goes on without a hitch. SHKPL258CP...Coax Splicer Manual Coax Switch Switch between 2 radios & 1 antenna with flip of switch. SHKCS2...Coax Switch Centerpin PL-259 Simple, no solder PL-259 connector. No critical stripping of coax insulation. No fussing with coax braid. SHKPL259CPG...Connector Automatic Coaxial Switch Auto toggles 2 radios to 1 antenna. Key mic on one of the radios, it switches antenna to it. Radio stays locked onto antenna until auto switch detects a transmit from other radio. SHKAS2...Auto Antenna Switch DooDad Cable strain relief for connection between coax cable & end fitting. SHK Strain Relief AM/FM/VHF Separator Operate AM/FM and VHF radios at same time without interfering with performance. Cables & connectors supplied. 4357S is used with base loaded antennas such as: 5215, 5240-R & 5241-R. SHK4357S...Band Separator Loud Hailer 5"-8 Watt Speaker. Built for outdoor use. SHKHS-5 Antenna Fixed Base Cast stainless steel. Wire feeds directly thru base, no need for grommet. Base has recess to fill with silicone sealant for watertight. For TV/Loran/GPS/VHF Antenna with 1" #14 threads. SDG Antenna Base Fixed SS 4 SDG Antenna Base Fixed SS 4 DP Antenna Fixed Base Machined AISI 304 stainless steel. Wire feeds directly thru base, no need for grommet. For TV/Loran/GPS/VHF Antenna with 1" #14 threads. SDG Antenna Base Fixed 4-1/4 DP SDG Antenna Base Fixed 1-1/2" Antenna Mount Extension Machined 304 stainless steel tubing. Length: 12" OD:1-1/16" ID: 13/16". Display pack. SDG Antenna Mount Extension 12 SDG Antenna Mount Extension 24 Antenna Radio Tester Compact meter checks performance of VHF radio system. Measures: Power coming from radio into antenna/receiver function. Standing wave ratio (a measure of efficiency of antenna system.) SHKART3...Radio Tester Swivel - Tall Antenna Base Investment cast 316 stainless steel. Overall length: 4-1/2" Height: 3-3/8". Length to base: 3-9/16" base dia: 2-13/16". SDG Antenna Base SS Swivel Tall

58 98 Anrenna Accessories Laydown Antenna Hook Stamped 304 stainless steel. Height: 3-13/16" - width: 1". Display packed. Hook gap top: 2-3/8", hook gap bottom: 1-3/4". SDG Laydown Antenna Hook SS Connector Elbow Gold plated brass withstands the elements. Minimizes connector borne signal loss. Right angle (90 ) Pl-259 to SO-239 adapter. SHKRA259239G...Elbow 90 PL259 Gold Male UHF Connector/Reducer - 8U Cable Chrome plated brass. Combo of 2 parts: Display pack. UHF connector: PL-259 for UC cable adapter. Reducer, UG175U for RG-58/U cable. SDG Connector & Reducer UHF SDG Connector & Reducer UHF Double Female UHF Connector Chrome plated brass. Use with 2 PL-259 connectors. Display packed. Length SDG /8" Extension Cable for SRA40 Satellite Antenna Band is sirius satellite radio, 35' long. Frequency range: GHz. DBi gain SHKSRC35...Extension Cable SRA40...SAT 35' UHF T Adapter Chrome plated brass. Length of top: 1-9/16" Stem height: 1-1/4" Width: 11/16". Display pack. SDG UHF T-Adapter Microphone Clip Stamped 304 stainless steel. Display pack. Length: 1-7/8" Width: 1" Screw to screw: 1/2" SDG Microphone Clip SS DP Cobra VHF Radio - Fixed Mount US/Canadian/International channels 1 & 25 watts output power. All weather channels & alerts. GPS compatible - waterproof ( JIS7 standards). 1 button DSC (digital selective calling). Instant access 16/9 channel. Controls on mic channel up/down/instant 16/9. Dual watch - scan - detachable mic. External speaker jack - bracket mount. COBMRF55...Radio VHF Fixed Mount 25W Pitot Tube Shield Stamped 304 stainless steel. Display pack. Vertical mount protects cables and electrical wiring. Overall width: 1-1/4" - Height: 3/4". Screw to screw 7/8" - Depth 3/8". SDG Pitot Tube Shield SS DP Shim Kit with Tilt For ratchet mounts. 4 shims, heavy duty rubber. 2 with: front/back & side/side slope. Each shim adds a half notch (5 ) tilt. Stack for extra weight or compound angles. SHK414...Shim Kit with 5 deg. Tilt for 4186 Cobra Dual Power VHF Transciever US/Canadian/International channels. 1 & 25 watts output power, all weather channels/alerts. GPS compatible - waterproof (JIS7 standards). 1 button DSC (digital selective calling) call waiting. Noise canceling speaker/microphone with controls. Tri-watch - memory scan - PA capability. Instant access 16/9 channel. Illuminated LCD display/keys. Flush/surface mount kits - GPS cable. COBMRF75...Radio VHF Fixed Mount 25W Dlx COBMRF75B...Radio VHF Fixed Mount 25W BLX Black

59 VHF Radios and Horns 99 Cobra VHF Handheld Radio Compact design is submersible to JIS7 standards. Signal strength meter has a powerful NiMH battery. External speaker - mic jack. Selectable power: 1, 3, 5 watt. All 10 NOAA weather channels. Illuminated display & function keys. Instant channel 16/9. Spring loaded belt clip. COBMRHH325VP...Radio VHF Handheld 5 Watt Mini Twin Horn Stainless steel covers, diaphragms & mounting bracket. DB(A) rating: 109 at 1 meter. 3" L x 8" W x 1-3/4" H. Volt AFI Mini Compact Horn 304 stainless cover & bracket. Totally sealed sound unit. 3" L x 3-1/4" W x 1-3/4" H. Volt AFI Handheld VHF Radio - 3 Watt Waterproof Rugged compact design: recreational/work boats or portable backup for large vessels. Unique compact VHF radio is waterproof to (JIS-4 standards). Illuminated LCD display & keypad, good to use in low light. Dual watch, auto shut off saves batteries. Built in NOAA channels & alert for 24 hr. access to local weather. Weather alert utilizes audible & visual alert if bad weather is near. Acts as all hazard emergency receiver for weather & natural disaster or emergencies from national, state & local government. Includes: DC charger, charging jack & rechargeable batteries. Battery jack allows batteries to be charged in unit. Standard removeable spring loaded belt clip lanyard. Packed with NiMH batteries, no memory when charging. You can also use 5 AAA alkaline batteries in emergency. DC cigarette charger. 1 year warranty if sold in USA. COBMRHH125...Radio VHF Handheld 3 Watt 12 Volt Dual Trumpet Electric Horn 100% stainless steel exterior - 5 year warranty. Laminated horn signal cars & SS screws. Type 304 stainless steel diaphram. Max. amp draw: 10 Amps. db (A0 rating: 123 at 1 meter.) Fundamental frequency: 15 Hz. Dimensions: 18-1/2" L x 8" W x 5" H AFI10029XLP...Premium XLP Horn MiniBlast Compact Horn Long lasting ASA plastic cover. Sealed sound unit with stainless diaphragm. 4-3/8" L x 3-3/8" W x 2" H. Volt Color AFI Black AFI White

60 100 Windshield Wipers Waterproof Windshield "WMW" Wiper/Motor Kit 100% waterproof, totally sealed. Corrosion resistant case/shaft housing of heavy, chrome-plated brass. Front plate and wiper shaft are stainless steel. Self parking. Frame mount. 3/8" dia. x 2-1/2" shaft length. AFI Sweep Wiper Kit AFI-500 Wiper Kit Waterproof motor, # Deluxe 11" blade & 33006A deluxe arm. Pre-set at 80 sweep (adjustable to 110). Self parking. Volt AFI Standard Windshield Wiper Arms Fits "STD" and "WMW" motors. AFI /2" x 12" Adjustable Stainless Steel Deluxe Curved Blade Deluxe curved blade, stainless steel construction. High quality silicone rubber squeegee. Works well on curved or flat windshields. AFI Wiper Blade 11 SS Curved AFI Wiper Blade 14 SS Curved AFI Wiper Blade 16 SS Curved AFI Wiper Blade 18 SS Curved AFI Wiper Blade 20 SS Curved Heavy Duty Polymer Wiper Blade Black glass poly impregnated build. Marine grade rubber squeegee. Standard "STD" Windshield Wiper/Motor Kit Frame mount, heavy duty motor & gear train. Corrosion proof case is aluminum alloy. Base plate/mounting plate are naval brass with heavy, chrome plating. Black crackle, non-reflective finish. Self-parking. 3/8" shaft dia., 2-1/2" shaft length. 11" straight blade & adjustable arm. Windshield Wiper Blades Standard Stainless steel construction. For curved or flat windshields. Not for use with deluxe arms. AFI31018B...Wiper Blade Black Poly 18 AFI Wiper/Motor Kit AFI Wiper/Motor Kit AFI " Straight Blade AFI " Straight Blade Stainless Adjustable Arm All stainless steel. Length AFI33006A...6-3/4 to 10-1/2" AFI33010A...14 to 20" Deluxe Black Adj. Arm Black epoxy coated stainless. Length AFI33012A " Deluxe Adjustable Pantographic Arm Stainless steel construction. Motor shaft mounting, additional set screw clamping. For heavy duty motors. Length AFI33032A...12 to 17" AFI33037A...17 to 22" Classic Straight Blade 11" hook & catch style classic straight blade. Stainless steel. Replaces most standard blades on boats prior to AFI Wiper Blade 11 SS Straight

61 Windshield Wipers and Motors 101 MRV 2 Speed Wiper Motor Easily powers 22" x 22" arm/blade combo. Accepts blades from 16" to 24". Pre-set sweep at 80 - adjust to 45, 60, or /8 inch dia. shaft in corrosion resistant casing. Heavy duty 12V motor with right angle drive. 2 speed motor can be operated as 1 speed. Solid brass knurled drive nut and brass/stainless drive shaft. Adjust right or left self parking, coast to park. Wiper Blades For flat windshields: straight. Heavy duty edge blades are non-refillable. High quality natural rubber & stainless steel. Bridge width with spacer;.250". Bridge width without spacer;.200". AFI Wiper Motor 80 Deg 2-1/2 Shaft AFI Wiper Motor 80 Deg 1 Shaft AFI Wiper Motor 80 Deg 3-1/2 Shaft AFI Wiper Motor 110 Deg 2-1/2" Shaft AFI Wiper Motor 110 Deg 1" Shaft AFI-1000 Waterproof Wiper Powers 16" x 16" arm/blade combo sweep set up to 110. Fully sealed waterproof housing, 12 volt heavy duty motor. Adjustable self park right/left, available in shaft lengths. Pre-set at 80 or 110 sweep adjustable to 50,60,80 or 110. Stock# Shaft AFI /2" AFI /2" AFI /2 110 deg AFI /2 110 deg AFI-1000 Waterproof Wiper Kit Includes: wiper motor S silver polymer blade stainless arm. Self parking 12 volt heavy duty motor. Fully sealed waterproof housing. Shaft AFI /2" BSC Blade For Wiper 20 BSC Blade For Wiper 22 Heavy Duty Wiper Arms/Blades Fits WWF series of wiper motors. BSCBD " Heavy Duty Straight Blade BSCSE S...13"-18" HD Adjustable Arm United Technologies Wiper Motors "WWF" wiper motor provides a totally self contained oscillating shaft, requires no external linkage. Parts exposed to weather are corrosion resistant. O-ring between oscillating shaft & its bearing stud prevents water from entering. Worm gear on armature shaft turns a large molded drive gear assuring quiet operation. 12 volt; 1 speed. Self-parking. BSCWWF Wiper Motor - 1" Shaft BSCWWF Wiper Motor - 2" Shaft BSCWWF Wiper Motor - 3" Shaft Self Parking Windshield Wiper Wiper features stainless steel cover. Matte black crackle non-reflective finish. Prewired for 12 volt DC electrical system. Includes arm (8"-12" adj.) and 11" blade. SDG Wiper Motor/Arm/Blade Seadog Windshield Wiper Arms & Blades Stamped #304 stainless/lexan blades. All hook style wiper blades/arms are replacements for Sea-Dog wipers prior to Hook style wiper blades/arms will fit most older wipers sold by: AFI, Wilcox, NA Taylor, GEM, L.S. Brown, & others. Arms Type SDG Arm 8" - 12" Adjustable...Hinge SDG Arm 11" - 15" Adjustable...Hinge Blades SDG Blade 11"...Hook SDG Blade 14"...Hook SDG Blade 11"...Hinge SDG Blade 14"...Hinge

62 102 Windshield Wipers and Wiring Accessories Self Parking Windshield Wiper Wiper features polished stainless steel cover. Prewired for 12 volt DC electrical systems. Includes arm (8"-12" adj.) and 11" blade. SDG Wiper Motor/Arm/Blade SDG Motor Only Manual Windshield Wiper Machined brass chrome plated/stainless steel. Arm length 8" - 12". SDG Manual Windshield Wiper Cable Tie Toughest of materials, virgin nylon, marine grade. Insoluble in solvents, alkali, dilute mineral acid, and most petrochemicals. Heavy duty locking, available in natural or UV resistant black. Operating temp: 100% capacity to 65 & 50% capacity from 65 to 185. Size Color ANC Cable Tie 4 Natural 25/Pkg ANC Cable Tie 6 Natural 25/Pkg ANC Cable Tie 8 Natural 25/Pkg ANC Cable Tie 11 Natural 25/Pkg Size Color ANC Cable Tie 4 Black 25/Pkg ANC Cable Tie 6 Black 25/Pkg ANC Cable Tie 8 Black 25/Pkg ANC Cable Tie 11 Black 25/Pkg Size Color ANC Cable Tie Assorted 25/Pk Windshield Wiper Injected molded nylon, formed 316 stainless. Length: 15-1/4" - blade length: 11". Base to connection point: 9-1/2". Display pack. Manual Wiper For straight and curved windshields. Arm is extendable from 6-3/4" to 10-1/2". Chrome plated zinc. 400 series stainless steel arm & blade holder. SDG Wiper Windshield Removable PRK533DP...Manual Windshield Wiper Write On Tubing White, write on heat shrink. Permanent identification. Dia. Qty ANC / ANC / Cable Tie Mount Screw down mounts. Max Lbs Screw Pk. ANC # ANC # ANC # ANC # Nylon Cable Clamp Available in natural or UV resistant black. For outdoor use. Size Qty ANC /4" Nat ANC /4" Nat

63 Wiring Accessories 103 Spiral Wrap Lets lead out at any point for ease of installing. Provides abrasion protection for wire/cable. Black. Size Length ANC /8"...10 ft ANC /4"...10 ft Line Support Clips Aluminum with synthetic rubber cushion. Double For O.D. Line Inches Width PRK164DP1...3/16"...3/8" PRK164DP2...1/4"...3/8" PRK164DP3...5/16"...1/2" PRK164DP4...3/8"...1/2" PRK164DP5...1/2"...1/2" Triple For O.D. Line Inches Width PRK165DP3...5/16"...1/2" PRK165DP4...3/8"...1/2" Grommets Flexible black vinyl. Abrasion resistance to wires passing thru panels. Size Qty ANC /8"...5 ANC /2"...5 Liquid Tight - Wire Seals Watertight cable entries into panels/junction boxes. Low cost for round cable. Wire Size Thread ANC ga to #2...1/2" NPT ANC #4 to 1/0...1/2" NPT ANC #1 to 3/0...3/4" NPT Line Support Clips Aluminum with synthetic rubber cushion. Single For O.D. Line Inches Width PRK163DP1...3/16"...3/8" PRK163DP2...1/4"...3/8" PRK163DP3...5/16"...1/2" PRK163DP4...3/8"...1/2" PRK163DP5...1/2"...1/2" PRK163DP6...5/8"...1/2" Plastic Cable Straps Black plastic. Ultra violet stabilized for weather resistance. Eliminates need for insulating cushion. 100/bag. connectors. I.D. PRK196DP1...3/16" PRK196DP2...1/4" PRK196DP3...5/16" PRK196DP4...3/8" PRK196DP5...1/2" PRK196DP6...5/8" PRK196DP7...3/4" Wire Ties / Cable Ties / Zip Ties 100 cable ties per package. SPT /2" White SPT6...6" White SPT6-BLACK...6" Black SPT6H...6" White w/hole SPT " White SPT12H...12" White w/hole SPT " White SPT " White Heavy Duty Black SPT8HD...8" Black Heavy Duty SPT14.5HD /2" Black Heavy Duty Cable Tie Mount Self sticking adhesive backed. Stock# SPT Tie Mount

64 104 Wiring Nylon Insulated Butt Connectors Double crimp. connectors. Wire Size Qty/Pkg ANC ANC Vinyl Insulated Butt Connectors Single crimp. Wire Size Qty/Pkg ANC ga...2 Nylon Insulated Flanged Spade Terminals Nylon insulated with insulation grip flanged spades. Wire Size Screw Size Qty/Pkg ANC ANC ANC ANC ANC ANC ANC ANC Connector Kit High quality tinned copper connectors. Nylon insulation. Reusable container. Includes crimp/cut/strip tool. ANC piece kit Connector Kit without Tool Assorted butt, ring, spade, male and female disconnects. ANC piece kit Nylon Insulated Ring Terminals Nylon insulated with insulated grip ring terminals. Wire Size Screw Size Qty/Pkg ANC ANC ANC ANC ANC ANC ANC ANC ANC ANC /4...5 ANC / ANC / ANC / ANC /8...5 ANC / ANC ANC ANC ANC ANC Nylon Insulated Butt Connectors Single crimp. Wire Size Qty/Pkg ANC ANC ANC ANC ANC ANC ANC Nylon Insulated Ring Terminals Nylon insulated with insulated grip ring terminals. Wire Size Screw Size Qty/Pkg ANC /4...4 ANC / ANC / ANC /8...4 ANC / ANC /2...3 ANC /2...25

65 Wiring 105 Nylon Insulated Ring Terminals Nylon insulated with funnel entry ring terminals. Wire Size Screw Size Qty/Pkg ANC ANC ANC /4...2 ANC / ANC / ANC / ANC /8...2 ANC / ANC /2...1 ANC / ANC / Way Connectors Nylon insulated. connectors. Wire Size Qty/Pkg ANC Nylon Insulated Disconnects Wire Size Tab Size Qty/Pkg ANC Female...4 ANC Female...4 Fully Insulated Nylon Disconnects Wire Size Tab Size Qty/Pkg ANC Female...4 ANC Female...25 ANC Male...4 ANC Male...25 ANC Female...4 ANC Female...25 ANC Female Multi-Stack Connectors Wire Size Tab Size Qty/Pkg ANC ANC Male...4 ANC Male...25 ANC Female...3 ANC Female...25 ANC Female ANC Male...3 ANC Male...25 Double Male - Female Adapters Tab Size Qty/Pkg ANC Scotchlok Connectors Wire Size Qty/Pkg ANC Snap Plug Connectors Nylon insulated. Wire Size Type Qty/Pkg ANC Male...4 ANC Male ANC Female...4 ANC Male ANC Female Battery Terminal Positive & negative lugs. Display pack. SDG Heavy Duty Lug Combo Pack Heavy duty, pure copper for max current flow. One of each size. Wire Size Screw Size Qty/Pkg ANC /16 & 3/8 ANC /16 & 3/8 ANC /16 & 3/8 Tinned Copper Terminal Up to 40% more conductive than lead terminals. Packed as pair: one 5/16 & one 3/8 wing-nut stud. Unit ANC Pair Battery Terminals Lead wing nut style. Stud size: 5/16" & 3/8". ANC Negative & Positive (carded)

66 106 Wiring Heavy Duty Lugs Heavy duty, pure copper for max current flow. Tinned for corrosion resistance & easy soldering. Seamless barrel for max strength. Closed end seals out moisture & funnel entry for easy wire insertion. Wire Size Screw Size Qty/Pkg ANC ANC /4...2 ANC / ANC / ANC / ANC /8...2 ANC / Heat Shrink Tubing Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seal to saltwater, oil, acids, sunlight, & provides strain relief. Highest shrink ratio to 1/3 original size. Shrinks at 257 F. Size Color Qty/Pkg ANC /8" x 3"...Black...3 ANC /8" x 6"...Black...10 ANC ANC /4...2 ANC / ANC / ANC /8...2 ANC / ANC ANC /4...2 ANC / ANC / ANC / ANC /8...2 ANC / ANC /2...2 ANC /4...2 ANC / ANC / ANC /8...2 ANC / ANC / ANC / ANC /8...2 ANC / ANC /0...1/4...2 ANC /0...5/ ANC /0...5/ ANC /0...3/8...2 ANC /0...3/ ANC /0...1/2...2 ANC /0...5/ ANC /0...3/8...2 ANC /0...3/ ANC /0...1/2...2 ANC /0...1/ ANC /0...5/ ANC /0...3/ ANC /0...1/2...2 ANC /0...1/ ANC /16" x 3"...Black...3 ANC /16" x 6"...Black...6 ANC /4" x 3"...Black...3 ANC /4" x 6"...Black...6 ANC /8" x 3"...Black...3 ANC /8" x 6"...Black...6 ANC /2" x 3"...Black...3 ANC /2" x 6"...Black...6 ANC /4" x 3"...Black...3 ANC /4" x 6"...Black...4 ANC " x 3"...Black...3 Assortment Pack Size Color Length Qty ANC /16-3/4" Black...3"...8 ANC /16-3/4" Black...6"...8 ANC /8"...Colors...3"...5 Heat Shrink Butt Connectors Stock Wire Size Qty/Pkg ANC ANC ANC ANC ANC ANC ANC

67 Wiring 107 Adhesive Lined Heat-Shrink Ring Terminals Wire Size Screw Size Qty/Pkg ANC ANC ANC /4...3 ANC ANC ANC /4...3 ANC / ANC /8...3 Coaxial Cable Premium tinned copper. RG 8X or RG 8U. Ft Type ANC RG 8X ANC RG 8X ANC ANC ANC /4...3 ANC / ANC / ANC /8...3 ANC / Heat-Shrink Disconnects Adhesive lined. Wire Size Tab Size Qty/Pkg ANC Female ANC Male Tinned Primary Wire Small spool sizes. Gauge Color FT. ANC Black...35 ANC Red...35 ANC Black...25 ANC Green...25 ANC Red...25 ANC White...25 ANC Black...18 ANC Green...18 ANC Red...18 ANC White...18 ANC Black...12 ANC Red...12 ANC Black...8 ANC Rd...8 Heavy Wall Battery Cable Heat Shrink Adhesive lined electrical connectors. Size Color Qty/Pkg ANC /4" x 3"...Black...3 ANC /4" x 3"...Blk/Red..1/1 ANC /4" x 3"...Red...3 Signal Cable White cover with red & black inner wire. Gauge Ft. ANC Coaxial Cable Assembly RG-58U cable with PL-259 fitting on each end. Display packed. Length SDG ' SDG ' SDG ' SDG ' SDG ' Bulk Primary Wire Single conductor boat cable & battery cabling. Tinned stranded copper insulated to meet ABYC, UL & USCG requirements. 105 C dry, 75 C wet foot spools. Gauge Color ALMP10BK Wire Primary...#10...Black ALMP10RD Wire Primary...#10...Red ALMP12BK Wire Primary...#12...Black ALMP12RD Wire Primary...#12...Red ALMP16BK Wire Primary...#16...Black ALMP16RD Wire Primary...#16...Red

68 108 Wiring Tinned Battery Cable Tinned, standard copper. 100 foot spool. Insulated to meet ABYC, UL & USCG requirements. Different gauges, see below. Colors: Black, Red, Yellow. Color Gauge Length ALMBC4BK...Batt Cable...Black Ft. ALMBC4RD...Batt Cable...Red Ft. ALMBC4Y...Batt Cable...Yellow Ft. ALMBC2BK...Batt Cable...Black Ft. ALMBC2RD...Batt Cable...Red Ft. ALMBC2Y...Batt Cable...Yellow Ft. ALMBC2/0BK...Batt Cable...Black 2/0 100 Ft. ALMBC2/0RD...Batt Cable...Red 2/0 100 Ft. ALMBC2/0Y...Batt Cable...Yellow 2/0 100 Ft. ALMBC3/0RD...Batt Cable...Red 3/0 100 Ft. ALMBC3/0Y...Batt Cable...Yellow 3/0 100 Ft. Tinned Duplex & Triplex Wire Flat multiple conductor boat cable & battery cabling. Tinned stranded copper insulated to meet ABYC, UL & USCG requirements, 600 volts, 105 C dry, 75 C wet. Various insulated single conductors are extruded together in parallel with a PVC jacket. 100 or 500 foot lengths. Duplex Gauge Length ALMDU Wire Duplex Ft. Y/R ALMDU Wire Duplex Ft.Y/R ALMDU Wire Duplex Ft. Y/R ALMDU Wire Duplex Ft.Y/R ALMDU Wire Duplex Ft. Y/R ALMDU Wire Duplex Ft. Y/R ALMDU Wire Duplex Ft.Y/R ALMDU Wire Duplex Ft.Y/R ALMDU Wire Duplex Ft. Y/R Triplex Gauge Length ALMTR Wire Triplex Ft. ALMTR Wire Triplex Ft. ALMTR Wire Triplex Ft. ALMTR Wire Triplex Ft. ALMTRI Wire Triplex Ft. ALMTRI Wire Triplex Ft. ALMTRI Wire Triplex Ft. ALMTRI Wire Triplex Ft. Tinned Primary Wire Tinned copper stranding for max protection against corrosion & electrolysis. Ultra flexible stranding resists salt water, battery acid, oil, gas & U.V. radiation. Rated: 600 volts & 105 C. Ancor's boat cable exceeds all: UL 1426 USCG Charter Boat (CRF Tiltle 46) ABYC Standards. 100 foot spools. Gauge Color ANC Black ANC Red ANC White ANC Black ANC Blue ANC Green ANC Red ANC White ANC Black ANC Brown ANC Green ANC Red ANC White ANC Black ANC Blue ANC Brown ANC Green ANC Red ANC White ANC Yellow ANC Black ANC Red ANC White Standard Duplex Cable 2 conductor marine grade tinned copper wire. Surpasses highest UL Boat Cable standards. Outer jacket for easy removal/best abrasion resist. Red & black inner conductor wire. Gauge Ft. ANC ANC ANC ANC ANC Safety Duplex Cable 2 conductor boat cable. ABYC "Safety for small craft" recommends use of yellow wire as DC negative. Helps distinguish difference between AC hot wire. Tinned copper stranding, premium vinyl insulation. Red/yellow inner conductors with white outer cover. Gauge Ft ANC ANC ANC ANC ANC

69 Battery Cables/Wires 109 Marine Battery Cable Tinned, ultra flexible (type 3) copper stranding. Premium vinyl insulation at 600 volts & 105 C. Marine grade battery cable exceeds all: UL 1426 USCG Charterboat (CFR Title 46) ABYC standards. 100 foot spools. Gauge Color ANC Black ANC Red ANC Black ANC Red ANC Black ANC Red ANC Black ANC Red ANC Black ANC /0...Black ANC /0...Red ANC /0...Black ANC /0...Red ANC /0...Yellow Scotchkote Coating Fast drying coating provides extra protection on splices in wet, oily, and corrosive conditions. Prevent cable & connector damage due to corrosive vapors from battery outgassing. Desctription THM Coating Turbo Lite Child resistant piezo electronic lighter system. Butane flame temp up to 1300 C/2500 F. Wind/weatherproof flame. Can be locked in on position. Small, easy to carry. ANC Torch Turbo Lite 50 foot spools. Gauge Color ANC Black ANC Red ANC Black ANC Red ANC Black ANC Red ANC /0...Black Triplex Cable 3 marine grade primary conductors in white jacket. Wire is black, green & white. Gauge Ft ANC ANC ANC ANC ANC

70 110 MARINCO SHORE POWER

71 Shorepower Inlets 111 On-Board Charging Inlet Marinco makes charging thru on-board battery charger safer/more convenient. Mounts on boat's exterior, hard wired directly to charger. 15A 125V straight blade inlet. MRN150BBI...Charging Inlet Contoured Power Inlet 3-wire locking, 50A 125V inlet. Marine grade UV stabilized glass filled polyester construction. Easy lock system with soft touch cap stays open in upright position. Watertight cap with rear safety enclosure, stainless steel trim. MRN6343EL-B...50A Contoured Inlet Boat Inlets When closed, all inlets exceed ABYC watertight regs. for inlets. Cap holds open on all inlets for easy insertion of shore power cable. MRN303SSEL-B...Power inlet, 316 stainless steel with 4-way right angle rear safety enclosure. MRN301EL-B...Power inlet, watertight, with 4-way right angle rear safety enclosure. Marine stainless steel trim. MRN305CRMB...Replacement interior for 303SSI-B & 301EL-B inlets. MRN301ELCB...Replacement cap & bezel for 30A 125V. Non-metallic inlets. Marine stainless steel trim. MRN301CRMB...Replacement interior for 30A non-metallic mfg. prior to 1/1/91. Receptacle 50A 125/250V 50 amp 125/250 dock side receptacle - black nylon. MRN6369CR...Receptacle 50A 125V/250V MRN301EL-B MRN305CRMB MRN301ELCB Boat Inlets 50 Amp 125/250V stainless steel Marinco. Cap holds open on all inlets. Easy insert shore power cable. When closed all inlets exceed ABYC watertight regs. MRN6373EL...Power Inlet MRN301CRMB Contoured Power Inlet 30A 125V 30 amp volt power inlet. Round contoured cover 3-wire locking watertight. 8-way - right angle rear safety enclosure. Stainless steel trim. Accepts all Marinco detachable power cordsets. MRN304EL-B...Inlet Contoured 30A MRN7420CR Contoured Phone / TV Inlets Glass filled polyester, watertight cap. Stainless steel trim on cap, soft touch cap design. MRNPH6444TV...Inlet TV/Phone Contoured MRNPH6444TVCR...Inlet TV/Phone Contoured Dockside Accessories MRN305CRR...30A 125V Yellow Single Receptacle MRN205CRR...20A 125V Yellow Single Receptacle MRN7420CR......Weatherproof Cover, Yellow Lexan with Lift Lid. Fits 15A, 20A, & 30A Single Receptacles. Telephone / Cable TV Connecting Devices Corrosion resistant outdoor telephone connecting devices. Hull inlet, watertight, non-metallic. Marine stainless steel trim. Contains telephone & cable TV connections. MRNPH6574TV...Hull Inlet

72 112 Shorepower Connectors and Plugs Mount Bracket Under dash mount for sealink/connectpro receptacles. Marine grade anodized aluminum. Sea Link Deluxe Dual Cord 12 volt, dual outlet cord and watertight caps. Plug features an LED indicator light. Moisture proof sealing ring. 10A fuse & sea link locking system. Direct Connect Terminate up to 4 electronic instruments on each set of terminals. Complete with quick connect terminals. Positive is molded in red, negative in black. MRN12BKT...Mounting Bracket MRN12VAD...Dual Cord MRN12VBB...Bus Bar Connect Sea Link Deluxe Plug Moisture proof sealing ring. LED power indicator light. Marinco Sea link locking system. Compatible with standard 12V receptacles. MRN12VPG...12 Volt Plug Sea Link Plug & Receptacle Interconnect system: Securely locks plug into receptacle. Watertight cap, moisture proof sealing ring. LED power indicator & fuse. MRN12VPK...Plug & Receptacle Connect Pro - Plug Locking plug, perfect for trolling motor. O-ring seal. Waterproof connections/corrosion resistant. plated brass electrical components. Accepts up to 8 gauge wire. Contoured grip for easy hook up. MRN12VBP...Male Plug Sea Link Receptacle Watertight sealing cap & sea link locking system. Compatible with standard 12V plugs. MRN12VRC...12V Receptacle ConnectPro - Receptacle Used with 2 or 3-wire configuration. Watertight sealing cap. 1-1/8" mounting hole. Accepts up to 8 gauge wire volt systems. MRN12VBR...Female Receptacle Battery Direct Connect Multi connect up to 4 electronic instruments. Comes complete with quick connect terminals. Positive molded in red, negative in black. MRN12VTR...Battery Connect ConnectPro - Set Plug/receptacle packaged together. MRN12VCP...Plug Set 8 Gauge Connect Pro Receptacle & Plug Combines 12VBR & 12VBP & 12 VBRAO. Packaged together. 6 gauge wire. MRN12VCP6...Connectpro Recept & Plug Sea Link Deluxe Extension Cord Heavy duty cable with watertight caps. Plug features an LED indicator light. Moisture proof sealing ring. Built in 10 amp fuse. Extends to more than 6 feet. MRN12VXT...Extension Cord

73 Shorepower Connectors and Accessories 113 MRN4731CR MRN4721CR 30 Amp Sealing Collars & Rings Easy lock ring - use on 30A non-metallic inlets. 30 Amp - Plugs, Connectors, & Covers Stock# MRN100R...Threaded ring, black LEXAN. For use with 30A systems. MRN110R...Sealing collar with threaded LEXAN... provides max moisture protection between cordset & adapter. Use with 20A & 30A locking system. Weatherproof Cover with Easy Lock Ring Provides superior weather-proof seal and a better grip. Use with 305CRCN or 205CRC. MRN103ELN...Cover with Easy Lock Ring 20 Amp 125 Volt Locking Type Connectors MRN205CRPN...Male Plug, Yellow Nylon MRN205CRCN...Female Plug, Yellow Nylon MRN305CRPN...Plug (male) MRN102N...Cover for 305CRP or 205CRP MRN305CRCN...Connector (female) MRN103RN...Cover with threaded ring for 305CRC or...205crc 15 Amp 125 Volt Locking Type Connector MRN4721CR...Male Plug, Yellow Nylon MRN4731CR...Female Connector, Yellow Nylon MRN4700CR...Receptacle, Duplex, Yellow Nylon 15 Amp 125 Volt Straight Blade Connectors MRN5262CRR...Duplex Receptacle, Yellow Nylon Straight Blade Connectors Corrosion resistant materials. MRN5266CR...Plug Male 15A Straight MRN5269CR...Connector Female 15A Straight MRN5366CR...Plug Straight Blade 20A MRN5369CR...Connector Straight Blade 20A Weatherproof Covers Plug Boot Use with 5366CR or 5266CR (male plug). MRN6017Y...Plug Boot 15/20A SB Connector Boot Use with 5369CR or 5269CR (female connector). MRN6018Y...Connector Boot 15/20A SB MRN4700CR Plug & Boot - Value Pack Twist lock 305 CRPN male plug 30 amp, 125 volt. Marinco 102N contoured weather resistant cover. Two velcro cord organizer straps. MRN305CRPNVPK...Plug & Boot Value Pack 30A Locking Connector 50A 125V Female connector. Best when used with weatherproof cover. MRN6360CRN...Connector Female 50A 125V MRN6364CRN...Connector Female 50A 125/250V MRN7715CRN...Long cover for 6364CR MRN7715ELN...Cover with easy lock ring for 6364CR

74 114 Shorepower Connectors & Adapters Locking Plug 50 Amp 125/250V B4 wire male plug, 3 blades. Corrosion resistant materials. Best when used with weather proof cover. MRN6361CRN...Plug Male 50A Locking 125V MRN6365CRN...Plug Male 50A Locking 125/250V MRN7717N...Cover for 6365CRN Adapter Blank 15A/125V straight blade female. Connector molded to 14 gauge wire. 3 conductor lead. MRN101A...Adapter Blank 15A/125V MRN100A...Adapter Blank 15A-125V 10G 15, 20 & 30 Amp Boxes & Covers Boxes accept all 15A/20A/30A receptacles, telephone outlets & TV coax connectors. Stainless steel. Telephone / Cable TV Connecting Devices MRN7879CR...Weatherproof Cover - with Lift Lid. MRNPH Male Plug for Phone MRNPH Male Plug with Cover for Phone MRNPH Female Connector for Phone MRNPH Female Connector with Cover MRNPH Telephone Outlet, Black Lexan glass filled polycarbonate. Spring-loaded lift cover for weatherproof closure. Fits FS and FD boxes. MRNPJ Ivory Plate with Modular Telephone Outlet. Recommended For Interior Use. MRNPJ Ivory Plate with Coax Connector for Hook-up To Cable TV or Master Antenna. Recommended for Interior Use. MRNPH TV Cable/Phone Oulet with Cover Pigtail Adapters Covers & sealing collars for wet locations. Sealing collar system joins adapter to cordset. Positive, mechanical connection. Max moisture protection. MRN104A...Adapter 30A Fem To 15A Male MRN105A...Adapter 15A Fem To 30A Male MRN106A...Adapter 30A Fem To 20A Male MRN107A...Adapter 15A Fem To 20A Male MRN110A...Adapter 30A Fem To 50A Male MRN111A...Adapter 50A Fem To 30A Male MRN115A...Adapter 50A Fem To 15A Male MRN117A...Adapter 50A Fem To 30A Male MRN118A...Adapter 50A Fem To 50A Male MRN121A...Adapter 30A Fem To 50A Male MRN123A...Adapter 50A Fem To 50A Male Pigtail Adapter Plus LED power indicator light and contoured grip. Thumbprint ground blade locator. Connects detachable powercord to regular household receptacle. MRN104SPP...Plus Adap LED 30A Fem - 15A Male MRN105SPP...Plus Adap LED15A Fem - 30A Male One Piece Cord Adapters No cover, not recommended for wet locations. MRN80A...Adapter 15A Fem To 20A Male MRN81A...Adapter 15/20A Fem To 30A Male MRN82A...Adapter 20A Fem To 15A Male MRN83A...Adapter 30A Fem To 15A Male MRN84A...Adapter 30A Fem To 20A Male MRN85A...Adapter 20A Fem To 30A Male Adapter 114A Boatside female connector and dockside male plug connect to boat inlet or cordset and to dockside receptacle or cordset. 50A - 125/250V Locking with seal. Straight blade crowfoot collar system with molded grounding clip. MRN114A...Adapter 50A Female - 50A Male Adapter 118A Boatside female connector and dockside male plug connect to boat inlet, cordset or dockside receptacle. 50A - 125/250V Locking with sealing collar system. MRN118A...Adapter 50A Female - 50A Male

75 Adapters 115 CATEGORY 1 - ONE-PIECE ADAPTERS NOTE: Marinco Adapters do not have covers and are not recommended for use in wet locations. CATEGORY 2 - PIGTAIL ADAPTERS Shorepower Adapters

76 116 Shorepower Adapters & Cordsets "Y" Adapter Equipped with covers & sealing collars. Use in wet locations. 2-30A 125v Female 50A 125/250v Male. MRN153AY...50A to 30A "Y" Reverse Y Adapter Has 2 male plugs with special power isolation circuitry. Provides 50A 125/250 power when only 30A 125v receptacles are available. MRN167RYN...Reverse "Y" 50 Amp Cordset Power cord plus cordsets are made of highest quality, marine grade build with features not found on other power cords. LED power indicator light, lets you know if you have power. Watertight molded plug & connector for safety & durability. Heavy duty, super flexible 6 gauge conductor cable. Contoured grip ends with thumbprint locator for fast & easy connection. All models include the Marinco easy-lock system ring: a simple 1/8 twist of the ring provides a fast, positive watertight connection. All models also include a standard threaded ring for hook up to ordinary threaded inlets. Marine UL listed. MRN6153SPP...Cordset V 50A 30 Amp Shorepower Cordsets 30A 125V molded yellow cordsets. MRN50PCM2...50' cordset with sealing collar - moisture resistant connection to another cordset/adapter. MRN25PCM2...25' cordset with sealing collar for moisture resistant connection to another cordset/adapter. 30A Power Cord Plus - Cordset Has LED power indicator light & contour grip ends. Super flexible 10/3 cable & easy-lock system. Watertight molded plug & connector. 30 amp, 125 volt, 50 foot cord. MRN50SPP...Deluxe Cordset Marinco Telephone / Cable TV Cordsets Combo cordset of 25' or 50' of each cable. Jacketed together, molded on each end. Clean installation with fewer cordsets to store. MRNPHTV ' TV/Phone Cordset MRNTV ' TV Cable MRNTV ' TV Cable MRNPHTV ' TV/Phone Cable 50A Power Cord Plus Cordset 50 amp 125/250 volt - 50 ft. cordset. 6 gauge, 4 conductor flexible cable with molded ends. LED light on female connector. MRN6152SPP...Cord Set 50 50A 125/250V

77 Furrion 117 Locking Connector 125V Male connector. Universal to all other brands. UL listed. FURF15MLP-SY...Plug 15A Male FURF20MLP-SY...Plug 20A Male FURF30MLP-SY...Plug Male 30A 125v FURF50MLP-SS...Plug Male 50A 125v FURF52MLP-SS...Plug Male 50A 125/250v 30 Amp Cordset Furrion cordsets comply with ABYC and USCG, UL and CUL cable specs. 10/3 STW. 30A 125V molded yellow cordsets. FURF30C50SY...Cordset V FURF30C25-SY...Cordset V Locking Connector 50A 125V Female connector. Universal to all other brands. Made to NEMA standards. FURF15FMP-SY...Connector 15/20A Female FURF20FMP-SY...Connector 20A Female FURF30FMP-SY...Connector Female 30A 125v FURF50FMP-SS...Connector Female 50A 125v FURF52FMP-SS...Connector Female 50A 125/250v One Piece Powersmart Adapters These adapters have an LED power indicator feature. They are made to industrial quality for strength and long lasting use. Universal to all other brands. Made to UL and CUL specifications. Not intended for use in wet locations. FURF1520AD-SS..Adapter 15a Male To 20a Fem FURF1530AD-SS..Adapter 15a Male To 30a Fem FURF2020AD-SS..Adapter 20a Male To 15/20a Fem FURF2030AD-SS..Adapter 20a Male To 30a Fem FURF3015AD-SS..Adapter 15/20a Fem To 30a Male FURF3020AD-SS..Adapter 30a Male To 20a Fem

78 118 Aqualarm Aqualarm Accessories AQLRBA-12...Red 12V Bell Only AQLRBA-32...Red 32V Bell Only AQLEA-12A...12V Extra Loud Siren AQL " FPT Cooling Water Flow Detector AQL /2" FPT Cooling Water Flow Detector AQL " FPT Cooling Water Flow Detector AQL202...Low Oil Pressure Detector AQL204...Fire Detector 135 F AQL204A...Fire Detector 190 F AQL208A...Bilge water level detector AQL212...Engine overheat detector (bolt-style) AQL212A...Engine Overheat Detector (MPT) AQL V Printed Circuit Control Board AQL V Printed Circuit Control Board AQL852...Single Engine Indicator Panel AQL853...Twin Engine Indicator Panel AQLEA-12...Alarm Horn "Beeper" AQL202 AQL204 AQL212 AQL212A AQLEA-12A AQL208A AQL851 AQL852 AQL210 AQL853 Aqualarm Automatic Alarm System Monitor Completely automatic. No switches to set, just start engines. Loud (100db) bell or optional electronic horn alerts. Easy-to-read lighted panel indicates which detector is activated. Available for 12, 24, & 32 volt systems. Single Engine Consisting of: 1 ea. Low Oil Pressure Detector 1 ea. High Engine Temperature Detector 1 ea. Fire Detector 1 ea. Bilge Water Level Detector 1 ea. Cooling Water Flow Detector 1 ea. Printed Circuit Control Board 1 ea. Chrome Bell Alarm 1 ea. Visual Indicator Panel 1 ea. Interconnecting Cable AQLASM12-S...Single Engine 12 Volt Bilge Alarm High water bilge alarm. Float switch, in-dash gauge. Both a visual & audible alarm. Allows an unmanned compartment to be constantly monitored. For more compartments add model 40 float switch. (see pumps section). Voltage RUL33AL...12 Volt RUL31AL...32 Volt Twin Engine Consisting of: 2 ea. Low Oil Pressure Detector 2 ea. High Engine Temperature Detector 2 ea. Fire Detector 2 ea. Bilge Water Level Detector 2 ea. Cooling Water Flow Detector 1 ea. Printed Circuit Control Board 1 ea. Chrome Bell Alarm 1 ea. Visual Indicator Panel 2 ea. Interconnecting Cable AQLASM12-T...Twin Engine 12 Volt