Bottom-Up FlexShade Single Roller

Transcription

1 Bottom-Up FlexShade Single Roller Patent Pending Please check all appropriate selections and attach room schedule with verified dimensions. Select Fabric* Color name, no. & openness Draper GreenScreen Revive Draper SunBloc SB9000 Ferrari Soltis 99 Mermet Avila Mermet "E" Screen Mermet Flocké Mermet "M" Screen Mermet "S" Screen Mermet SilverScreen Mermet "T" Screen Mermet Vela Phifer SheerWeave Basic Phifer SheerWeave Infinity 2 Phifer SheerWeave PW3500/4100/4400 Phifer SheerWeave PW4500/4600 Phifer SheerWeave PW4550/4650 Phifer SheerWeave PW4700 Phifer SheerWeave PW4800 Phifer SheerWeave SW2000/2100 Phifer SheerWeave SW2400/2500/2600/2900 Phifer SheerWeave SW2701/2703/2705/2710 Phifer SheerWeave SW3000 Phifer SheerWeave SW5000 Phifer SheerWeave SW7000 Phifer SheerWeave SW7100 *Please see Draper's Shade Fabric Reference Sheet for fabric colors and specifications. Select Top Roller Endcaps Only Inside/Outside Ceiling Fascia Radius Square Optional Headbox Ceiling/Wall Pocket Style Bottom Roller Endcaps Only Inside/Outside Ceiling Fascia Radius Square Optional Headbox Ceiling/Wall Pocket Style (Note: without Closure panel) Select Finish Clear Anodized (standard) Ivory White Bronze Select Fabric Orientation* Regular Roll (from back of roller) Reverse Roll (from front of roller) Select Installation Option Inside (head/sill, jamb/jamb) Outside (overlap opening) Do any units abut at mullions? Which? Do any units install in pocket at ceiling? Which? Select Operator and Control Options D Clutch (Bead Chain) Stainless Steel Chain (continuous if spring-assist is provided) Metal Chain (continuous if spring-assist is provided) White metal Chain (continuous if spring-assist is provided) V AC s (Located at Top of Shade) Standard Quiet V Wall Switch for Single Shade Control Low Voltage and/or Multiple Shade Control* Please see Draper's IntelliFlex Reference Sheet and IntelliFlex Control System Planning Sheet to design a control solution for this product. The forms are available at or by contacting Draper. Radio Technology s V AC Radio Technology V AC Radio Technology Quiet Altus RF 1-Channel Transmitter 4-Channel Transmitter 5-Channel Transmitter with scroll wheel Dry Contact Interface Single Sun Sensor Wireless Wall Switch 1-Channel (Circle one: White/Ivory) 4-Channel (Circle one: White/Ivory) Chronis 1-Channel with 24-hour Timer Multi-Link Universal RTS Interface (5-channel) Multi-Link RS232 to RTS Interface (16-channel) Intelligent Technology (ILT) V s Standard ILT V Quiet ILT V 1-Channel RF Transmitter 4-Channel RF Transmitter 5-Channel RF Transmitter with Scroll Wheel 1-Channel IR Transmitter Wireless Wall Switch Please Note: Bottom-up FlexShade is not recommended for inclined installation due to a tendency to sag in the fabric panel. * Reverse Roll is accomplished by installing the Bottom-Up FlexShade backwards in the window. However, Draper needs to know if you are planning to install in this configuration so we can ensure the proper side of the fabric is facing the window. PROJECT: by ARCHITECT: CONTRACTOR: SUPPLIER: Copyright 2016 Draper Inc. Form Bottom-Up_SingleRoller_FlexShades_Sub16 Printed in U.S.A. DATE: REVISED:

2 Bottom-Up FlexShade Single Roller by Draper Page 2 of 5 Specifications Standard and Quiet V AC s Electric Operator: Drive unit inside roller, 4-wire, instantly reversible, lifetime lubricated. Right hand motor location standard. Left hand available. Adjustable limit switches, thermal overload protector and electric brake. Operates on V AC 1 PH 60 HZ current. Draws 1.1 Amps. For controls, see IntelliFlex Reference Sheet and IntelliFlex Planning Sheet. Quiet Electric Operator: Drive unit inside roller, 4-wire, instantly reversible, Adjustable limit switches, thermal overload protector and electric brake. Operates on V AC 1 PH 60 HZ current. Draws 1.1 Amps. Operates at or below sound level of 44 Db. For controls, see IntelliFlex Reference Sheet and IntelliFlex Planning Sheet. Call Draper for size limitations when using quiet motors. Roller Idler Assembly: Type 6/6 injected molded nylon and a zinc-plated cold rolled steel pin. Sliding pin for easy installation and removal of the roller. onto endcaps without exposed fasteners. Clear Anodized (standard), black, white, ivory, or bronze powder coat finish available. Continuous fascia available with coupled units V AC Radio Technology Standard and Quiet Quiet Electric Operator: Drive unit inside roller, 3-wire, instantly reversible, Built-in radio receiver. Limit switches adjustable using wall switch or remote control. Thermal overload protector and electric brake. Operates on V AC 1 PH 60 HZ current. Draws 1.1 Amps. Operates at or below sound level of 44 Db. Call Draper for size limitations when using quiet motors. Roller Idler Assembly: Type 6/6 injected molded nylon and a zinc-plated cold rolled steel pin. Sliding pin for easy installation and removal of the roller. onto endcaps without exposed fasteners. Radius fascia on small hardware only. Clear Anodized (standard), black, white, ivory, or bronze powder coat finish available. Continuous fascia available with coupled units V AC ILT s Electric Operator: Drive unit inside roller, 3-wire, instantly reversible, lifetime lubricated.right hand motor location standard. Left hand available. Built-in encoder and low voltage controller with data Limit switches adjustable using wall switch or remote control. Thermal overload protector and electric brake. Operates on V AC 1 PH 60 HZ current. Draws 1.1 Amps. Quiet Electric Operator: Drive unit inside roller, 3-wire, instantly reversible, Built-in encoder and low voltage controller with data Limit switches adjustable using wall switch or remote control. Thermal overload protector and electric brake. Operates on V AC 1 PH 60 HZ current. Draws 1.1 Amps. Operates at or below sound level of 44 Db. Call Draper for size limitations when using quiet motors. Roller Idler Assembly: Type 6/6 injected molded nylon and a zinc-plated cold rolled steel pin. Sliding pin for easy installation and removal of the roller. onto endcaps without exposed fasteners. Radius fascia on small hardware only. Clear Anodized (standard), black, white, ivory, or bronze powder coat finish available. Continuous fascia available with coupled units. FlexShade D Bead Chain Clutch D Clutch Operator: POM thermoplastic with welded 9 mm (.354") primary steel post with rotational bearing to ensure smooth and quiet operation. Overrunning design. Positive mechanical engagement of drive mechanism to tube. White (standard) or black color options. Stainless steel (standard) bead chain, or metal chain in white or black. Rollers: Extruded aluminum 1.56", 2", 2.36", 2.56" and 3.12" diameter roller tube as appropriate for size of shade. Components Endcap: 1 /8" thick zinc plated steel with reinforcement ribs. Wall or ceiling installation. 2 sizes: 3 1 /4" x 3 3 /4" and 4 1 /2" x 4 1 /2". Wall mount brackets are provided as standard. Snap-on plastic end cap covers to match clutch color. Fabric Attachment: Fabric attached to roller tube with spline fabric attachment method. Allows for removal of fabric panel without removal of roller assembly. Fascia: Optional L-shaped or radius cover of 6063-T5 extruded aluminum. Assembly snaps onto endcaps without exposed fasteners. Clear anodized finish (standard) or ivory, bronze, black or white powder coat. Fascia can also be wrapped in fabric. Radius fascia on small hardware only. back/top/front cover with removable bottom closure panel. Small size: 3 7 /16" x Clear anodized (standard) finish or black, white, ivory or bronze powder coat finish. Dimensions of rollers, operators and hardware at manufacturer s

3 Bottom-Up FlexShade Single Roller by Draper Page 3 of 5 Dimensions ized C* D* B* A* B* Shade Height Shade Width=Cloth Width /8" * These dimensions are different for each shade and are provided by Draper with your order. Dimension "A" is the vertical cable spacing. Dimension "B" is the distance from the vertical cable spacing to the vertical edge of the shade. Dimension "C" is the distance from the idler-end of the tube to the center of the cable attachment stud. Dimension "D" is the distance from the operator-end of the tube to the center of the cable attachment stud. Dimension Large Small *** 4 11 /16" 3 7 /16" *** 4 11 /16" 3 15 /16" ***These dimensions are for the Endcap Covers. Endcap, fascia or headbox dimensions fall within this dimension.

4 Bottom-Up FlexShade Single Roller by Draper Page 4 of 5 Dimensions D Clutch C* D* B* A* B* Shade Height Spear (Spring end) is on left as standard. Shade Width=Cloth Width /8" * These dimensions are different for each shade and are provided by Draper on the fabric ticket enclosed with each shade. Dimension "A" is the vertical cable spacing. Dimension "B" is the distance from the vertical cable spacing to the vertical edge of the shade. Dimension "C" is the distance from the idler-end of the tube to the center of the cable attachment stud. Dimension "D" is the distance from the operator-end of the tube to the center of the cable attachment stud. Dimension Large Small *** 4 11 /16" 3 7 /16" *** 4 11 /16" 3 15 /16" ***These dimensions are for the Endcap Covers. Endcap, fascia or headbox dimensions fall within this dimension.

5 Bottom-Up FlexShade Single Roller by Draper Page 5 of V Standard and Quiet Shade Wiring Diagram Do not wire motorized units in parallel without written consent from Draper. NOTE: This wiring diagram is for standard right-hand motor placement and fabric from rear of roller. For left hand motor placement with fabric from rear of roller, Red becomes Up and becomes Down. NOTE: Test shade operation. If shade direction does not correspond with the switch orientation, turn power back off then switch the red and black wires from the motor to the switch. White (Common) (Up) Red (Down) Control Single gang box by others switch Red Min. 4" x 2 1 /8" x 1 7 /8" deep For multiple shade or low voltage wiring consult diagrams provided with control V ILT Standard and Quiet Shade Wiring Diagrams Single Low Voltage Control Multiple Low Voltage Radio Technology V V Quiet s Internal Screen Wiring Data Cable Optional splitter Wall Switch, RF or IR Receiver, or integrated control system Data Cables Wall Switches, RF or IR Receivers, or integrated control systems Wall Switch or RF Receiver Multiple ILT s to V Power Supply ( ) Optional Modular Splitter Data Cable Wall Switch, IR or RF Receiver or integrated control system