Assembly Instructions

Size: px
Start display at page:

Download "Assembly Instructions"

Transcription

1 Assembly Instructions Part Number Description Model Approx. Assembly Time Cab Enclosure MULE SX 3-4 Hours WARNING Improper installation of this accessory could result in an accident causing serious bodily injury or death. To prevent an accident, be sure that this accessory is properly and securely installed on your vehicle. If you cannot properly install this accessory yourself, have a professional installer, such as an authorized Kawasaki dealer, install it for you. Prior to each use, check to be sure the accessory is securely attached to the vehicle and periodically inspect the accessory for any required adjustment, wear, and damage. Options Available: Windshield Gas Shock (not shown) Side View Mirrors (shown) Interior Rear View Mirror (not shown) Windshield Wiper (shown) KAF A Snow Plow (not shown) KAF A Heater (not shown) 2016 Kawasaki Motors Corp., U.S.A. Page 1 of 1

2 Parts List: Ref. # Description Qty A01 Windshield Assembly 1 A02 Right Side Door Assembly 1 A03 Windshield Support Assembly 1 A04 Roof Assembly 1 A05 Rear Panel Assembly 1 A06 Under-seat Filler 1 A07 Cowl Assembly 1 A0 ROPS Bracket 2 A09 Adhesive Backed Foam (1 ) 1 A10 Right Side Frame Assembly 1 A11 Left Side Frame Assembly 1 A12 Left Side Door Assembly 1 A13 Velcro Hook (169 ) 1 A14 Gas Shocks 2 A15 Zip Tie 2 - Hardware Kit (Not Shown) 1 Parts Diagram: A03 A04 A05 A02 A01 A10 A11 A06 A07 A0 A09 A09 A0 A12 A14 A13 A15 Page 2 of 1

3 WARNING S e r i o u s I n j u r y o r D e a t h This cab enclosure does not provide protection from rollover or other accidents. This cab enclosure does not provide protection from flying objects including golf balls. This cab enclosure does not provide protection from lightning. When lightning threatens take cover and do not operate vehicle. WARNING Exposure to Carbon Monoxide can Cause illness, serious injury or death. Never operate vehicle if suspicious of Carbon Monoxide. Inspect exhaust system for leaks monthly. Leaks can result from loose connections, corrosion, cracks or other damage to the exhaust manifold. If leaks are found, repair or replace exhaust system. Do not use vehicle until repair or replacement is complete. General Information: A. Refer to parts diagram on page 2 of this manual to help identify parts during the assembly process. B. Read and understand all instructions before beginning. C. Apply a silicone sealant to seal any minor gaps which may occur due to vehicle variations. D. Use caution to avoid damaging the factory installed threaded inserts. Begin the bolt engagement by hand to guard against potential cross threading. E. Installation of bulky and heavy cab parts are best done with an assistant. Tools Required: Set of Standard and Metric Sockets (3/ Drive) 3/ Drive Ratchet Set of Standard and Metric Open End Wrenches Set of Standard Allen Wrenches 9.5 Nm (7 ft lb) to 9 Nm (72 ft lb) Torque Wrenches Right Angle Screwdriver #3 Screwdriver Drill 3/" Drill Bit Pair of Scissors Grease Silicone Sealant Isopropyl Alcohol or Other Cleaner Page 3 of 1

4 NOTE: 1. Unless otherwise specified, leave all cab enclosure hardware loose for later adjustment. 2. It s recommended electrical accessories be wired into the dashboard connections prior to cab installation. If done at a later time, wiring cannot be completed without partial disassembly of the hard cab. Installation Instructions: 1. Park the vehicle on level ground, set the parking brake and turn off the ignition switch. 2. If installing wiper or other electronic accessories, remove hood and connect wiring at this time. Partial disassembly of the cab will be required for electrical connections at a later time. 3. Remove and save the (2) seat back retaining nuts and seat back itself then place aside. 4. Remove and save left, right and center seatbelts. 5. Loosen front ROPS (Roll-Over Protective Structure) bolts on both sides of vehicle. 6. Remove and save upper rear ROPS nuts, bolts & flat washers. 7. Assemble the rear panel assembly (A05) to the ROPS. Reinstall the upper rear ROPS bolts and nuts with flat washers on the inboard side only. A05 NOTE: Do not tighten upper rear ROPS bolts at this time.. Clean the metal surface below the rear window to remove any dirt, oil or grease. 9. Cut a 4-1/ long piece of velcro hook (A13). Adhere just above the (3) pre-installed snaps. Components must be at room temperature for proper adhesion. A05 A13 Page 4 of 1

5 10. Flip lower portion of seat up, pull the left side of the under-seat filler panel (A06) over the parking brake lever and left seat belt bracket, then feed the center seat belts through the two holes in center of the panel and reinstall them, fasten the (3) snaps on the under-seat filler (A06) to the (3) snaps installed on the rear panel (A05). Fit the under-seat filler down the rear of the ROPS and along top of the chassis (beneath seat). 11. Ensure vehicle seatbelt brackets protrude through the under-seat filler holes then reinstall the seatbelts which were removed in step 4. Snaps A Torque seatbelt hardware to: 34 N m (3 kgf m, 25 ft lb) A Reinstall the seat back. 14. Remove and save the (2) left ROPS bolts. Pull ROPS tube away from vehicle slightly and slip front ROPS bracket (A0) between ROPS tube and its mounting surface. Align holes and reinstall bolts. Repeat for other side. A0 15. Torque front ROPS bolts at this time. 9 N m (10 kgf m, 72 ft lb) 16. Remove the left side door assembly (A12) from left side frame assembly (A11). 17. Cut approximately 2-1/2 long piece of the provided adhesive backed foam (A09) and adhere to the side frame s bulb rubber at the location in the diagram. This will seal the sharp corner between the side fender and hood. 1-1/2 A11 A09 Page 5 of 1

6 1. If installing the optional windshield assist shocks, assemble the brackets to the side frame at this time. 19. If installing the optional side view mirrors, assemble to the side frame at this time. 20. Position the left side frame assembly (A11) on top of vehicle s floorboard. Secure with (5) 5/16-1 x 3/4 long button head, flanged cap screws & (2) 5/16 x 1 steel fender washers. Do not tighten at this time. 21. Repeat steps for the right side frame assembly. NOTE: Check to make sure the passenger side seatbelt retractor does not contact the side frame. If needed, adjust the angle of the retractor to maintain adequate clearance. See step 36 found on page 9 for further detail. A Install the windshield support assembly (A03). Use (4) 5/16-1 x 3/4 long button head, flanged cap screws. A Prepare cowl assembly (A07) for installation by cutting (2) 5-1/2 long pieces of the provided adhesive backed foam (A09) and adhering to the cowl s bulb rubber at locations in diagram. Position them to seal into the sharp corners on the hood valleys. A07 A09 Page 6 of 1

7 24. With help from an assistant place the cowl assembly (A07) in position over the vehicles hood compressing the previously install foam. Fasten cowl with (6) 5/16-1 x 3/4 long button head, flanged cap screws. A Install windshield assembly (A01) to windshield support assembly (A03) using a plastic spacer block beneath each plastic hinge spacing it off the windshield support. Snug fasteners, but do not fully tighten. Use (4) 5/16-1 x 1-1/2 long flat head screws & (4) 5/16-1 flange nyloc nuts. A01 A Fasten the windshield latch brackets (which are pinned to the windshield latches) to the corresponding tabs welded to each of the side frames. Snug fasteners, but do not fully tighten. Use (4) 5/16-1 x 3/4 long button head, flanged cap screws & (4) 5/16-1 flange nyloc nuts. Page 7 of 1

8 27. With help from an assistant, place the roof assembly (A04) on top of the side frames. Align the (2) holes labeled (X) with side frame inserts on either side first. Secure with (10) 5/16-1 x 3/4 long button head, flange screws, (10) 5/16 nylon flat washers and (3) 5/16-1 nylon nuts. X X A04 2. Tighten all cab enclosure bolts. 5/16-1 hardware, 25.5 N m (2.63 kgf m, 19 ft lb). NOTE: Use caution when tightening roof bolts to avoid crushing the nylon washers. 29. Close windshield latches and tighten windshield hinge fasteners then the windshield latch bracket bolts. NOTE: The windshield hinges are plastic components. Do not over tighten the 5/16-1 flat head screws. Torque to no more than: 9.5 N m (.97 kgf m, 7 ft lb). NOTE: The windshield hinges mount to the windshield support via slots. If need be, loosen hinge hardware & push windshield up or down in slots to attain better windshield to side frame seal. 30. Rear ROPS bolts may be torqued at this time. 44 N m (4 kgf m, 32 ft lb) 31. Using the left side frame assembly (A11) floorboard holes as a guide, drill the vehicle s floorboard with a 3/ drill bit. 32. Secure the left side frame assembly (A11) floorboard with (2) 5/16-1 x 3/4 long button head, flanged cap screws, (2) 5/16 x 1 steel fender washers and (2) 5/16-1 nyloc nuts. 33. Repeat steps 31 & 32 on the right side. A11 Page of 1

9 34. Clean surfaces of the left side frame assembly (A11) depicted in the adjacent diagram to remove any dirt, oil or grease. 35. Cut (2) pieces of velcro hook (A13) and adhere to the left side frame assembly (A11). Velcro Hook, 17-1/ Long A11 Velcro Hook, 4-7/ Long 36. Clean surfaces of the right side frame assembly (A10) depicted in the adjacent diagram to remove any dirt, oil or grease. If the seatbelt retractor needs adjustment, remove the plastic plug from the right side frame assembly (A10) by pushing from the inside out to avoid damaging painted surfaces. A socket can then be inserted through the hole for easy access to the seatbelt bolt. 37. Cut (2) pieces of velcro hook (A13) and adhere to the right side frame assembly (A10). Velcro Hook, 17-1/ Long Velcro Hook, 7-5/ Long A10 Plastic Plug Page 9 of 1

10 3. Tilt the lower portion of the seat up. 39. Using the velcro loop that s sewn to the under-seat filler as a guide, adhere the remaining velcro hook (A13) to the vehicles chassis beneath the seat. A13 NOTE: Take care routing velcro and underseat filler around emergency brake handle. This area should be clear of obstructions. B 40. Fit under-seat filler down along side frames, around the vehicle s ROPS and then under the seat pressing into the velcro. 41. Pass zip ties (A15) through the two sets of 1/4 holes found in the under-seat filler wrapping around chassis at locations B. B Page 10 of 1

11 42. Grease door hinge pins and reinstall doors. 43. Install the door gas shocks (A14) with the quick release end attached to the side frame ball stud. A14 A09 A The door latches should double click for full engagement, proper closure and seal. If necessary, make adjustments to the striker pin position on the side frame using (2) 3/4 open end wrenches. Page 11 of 1

12 Operation Windshield Operation: OPENING: Position one hand on each handle so that you can operate both handles simultaneously. Lift both handles to unlock them and then push the handles to open the windshield to the venting position. Be sure to push the handles until they lock into the venting position. CLOSING: Position one hand on each handle so that you can operate both handles simultaneously. Lift both handles to unlock them and then slowly allow the windshield to close by supporting its weight while it is closing. After the windshield is in the closed position, push both handles down into the closed locked position. NOTE: Both handles should be locked in the venting position, or they should be locked in the closed position while operating the vehicle. There are no intermediate positions. Care and Maintenance: Check and tighten all hardware after 20 hours of operation. Periodically inspect and tighten hardware for the remainder of the unit s service life. Keep the enclosure components clean in order to prevent dust and dirt from forming an unattractive film. The life of your cab components depend upon following these care procedures: 1. NEVER USE AN ABRASIVE DETERGENT / VEHICLE CLEANER OR A WIRE BRISTLED BRUSH. Do not use any CITRUS BASED CLEANERS such as orange or lemon. 2. NEVER USE AN ALCOHOL-BASED PRODUCT FOR CLEANING PLASTIC WINDOWS. Do not use WINDEX, GLASS PLUS, FANTASTIC, etc. Use of these products will result in deterioration of the plastic windows. 3. Clean the enclosure surfaces thoroughly with warm soapy water and a COTTON cloth or chamois. Be sure to use mild soap, specifically a dish liquid or equivalent. Clean in a light circular motion for best results. 4. Remove grease and oil with mineral spirits and a COTTON cloth or chamois. Wiring After Cab Installation: NOTE: Unless otherwise specified, leave all cab enclosure hardware loose for later adjustment. 1. Park the vehicle on level ground, set the parking brake and turn off the ignition switch. 2. Lift seat forward to gain access to the battery and disconnect the negative terminal. 3. Remove and set aside the (2) 5/16-1 x 3/4 long button head, flanged cap screws & (2) 5/16-1 flange nyloc nuts retaining the windshield latch brackets to the right side frame. Page 12 of 1

13 4. Repeat step 3 for the left side. NOTE: Once the windshield hinge fasteners are removed during the next step the windshield assembly could fall! Proceed with caution. 5. With help from an assistant, remove and set aside the (4) 5/16-1 x 1-1/2 long flat head screws & (4) 5/16-1 flange nyloc nuts fastening the windshield assembly (A01) to the windshield support assembly (A03). (Roof not shown for clarity). A01 A03 6. With help from an assistant, remove the windshield assembly and place it aside. 7. Remove and set aside the (6) 5/16-1 x 3/4 long button head, flanged cap screws retaining the cowl assembly (A07) to the side frames. A07. Follow the electrical accessory installation instructions. 9. With help from an assistant place the cowl assembly (A07) in position over the vehicle s hood compressing the seal. Fasten cowl with (6) 5/16-1 x 3/4 long button head, flanged cap screws removed in step With help from an assistant, reinstall the windshield assembly and the (4) 5/16-1 x 1-1/2 long flat head screws & (4) 5/16-1 flange nyloc nuts removed during step 5. Page 13 of 1

14 11. Install the fasteners which were removed in step 3, (2) 5/16-1 x 3/4 long button head, flanged cap screws & (2) 5/16-1 flange nyloc nuts which retain the windshield latch brackets to the right side frame. 12. Repeat step 11 for the opposite side. 13. Close windshield latches and tighten windshield hinge fasteners then the windshield latch bracket bolts. NOTE: The windshield hinges are plastic components. Do not over tighten the 5/16-1 flat head screws. Torque to no more than: 9.5 N m (.97 kgf m, 7 ft lb). NOTE: The windshield hinges mount to the windshield support via slots. If need be, loosen hinge hardware & push windshield up or down in slots to attain better windshield to side frame seal. 14. Tighten all remaining 5/16-1 hardware, 25.5 N m (2.63 kgf m, 19 ft lb). Page 14 of 1

15 Service Parts Breakdown Page 1 of Page 15 of 1

16 Service Parts Breakdown Page 2 of Page 16 of 1

17 Service Parts Breakdown Page 3 of Page 17 of 1

18 Service Parts Breakdown Page 4 of HARDWARE KIT X SCREW, FLAT HEAD, 5/16-1 X 1-1/2 LG 15X NUT, HEX FLANGE, NYLON INSERT, 5/ X STEEL WASHER, 5/16 ID X 1 OD. 3X SCREW, BUTTON FLANGE, 5/16-1 X 3/4 LG 10X NYLON WASHER, 5/16 ID X.69 OD Page 1 of 1

Assembly Instructions

Assembly Instructions Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-0903 Windshield Wiper Kit Mule SX 1 Hour WARNING Improper installation of this accessory could result in an accident causing

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. 1 of 18 INSTALLATION & OWNER S MANUAL KUBOTA RTV 400 CAB (Not for use on RTV 500) These instructions are for installation of the complete cab as well as the modular components. DESCRIPTION:

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. B, p. 1 of 25 INSTALLATION & OWNER S MANUAL POLARIS RANGER RCS (for models XP or HD) (for model years 2009-) cab without doors kit (p/n 1POLRCWD) cab with doors kit (p/n 1POLRC) doors only kit (p/n

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 CAB KIT (p/n: KAF40-005WA and KAF40-005BA) NOTE: Hard sided doors are sold separately. This manual is the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 13 INSTALLATION & OWNER S MANUAL Polaris Ranger 400-EV PathPro SS Cab (fits 2010 - current) (p/n: 1PRG400FS) The contents of this envelope are the property of the owner. Be sure to leave with the

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. of 0 INSTALLATION & OWNER S MANUAL MASSEY FERGUSON GC2400 cab kit p/n MFGC2400 Installation Instructions The contents of this envelope are the property of the owner. Be sure to leave with the

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 16 INSTALLATION & OWNER S MANUAL YAMAHA VIKING CAB KIT WITH HARD DOORS p/n: 1YAMVK fits model years 2014- (fits Yanmar Bull model years 2017-) NOTE: By design, the doors are made to not be removable!

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL Polaris Ranger 500-800 PathPro SS Cab (fits 2010 - current) (p/n: 1POLRFS1) The contents of this envelope are the property of the owner. Be sure to leave with the

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. K, p. 1 of 11 INSTALLATION & OWNER S MANUAL POLARIS FREEDOM CAB INSTALLATION INSTRUCTIONS FOR THE POLARIS RANGER (p/n 2876196-067) IMPORTANT: THIS ACCESSORY WEIGHS 340 POUNDS. PLEASE ADJUST THE VEHICLE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL John Deere Gator PathPro SS Cab (fits all HPX and XUV models with the O.P.S. system installed) (p/n: 1GTRXUV) (O.P.S. = Operator Protective Structure) The contents

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. E p. of 3 INSTALLATION & OWNER S MANUAL V446 Front Cab Kit and V446 Rear Cab Kit for RTV 40 INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 TRANS 4 FRONT CAB KIT (p/n: KAF40T-001WA and p/n: KAF40T-001BA) NOTE: Hard sided doors, soft sided doors, and rear cab are sold

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 30 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KU3AS) SOFT SIDED CAB ENCLOSURE (p/n 1KU3SS) This Curtis Cab is designed and manufactured

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. 1 of 6 INSTALLATION & OWNER S MANUAL YANMAR SA-424 WINDSHIELD KIT P/N 1CYSA4WS FITS SA-424 TRACTORS WITH 4 POST ROPS The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. L p. 1 of 16 INSTALLATION & OWNER S MANUAL V4262 CAMO (SOFT SIDED) CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL This Curtis Cab is designed and manufactured for use only as reasonable weather protection. This cab is not applicable, Nor should the cab be considered as protection against

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 3000 SERIES (4200/4300/4400) (4210/4310/4410) & (3120/3320/3520/3720) HARD SIDED CAB ENCLOSURE (p/n 1JD3520AS) SOFT SIDED CAB ENCLOSURE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. D, p. 1 of 14 INSTALLATION & OWNER S MANUAL Bobcat CT 230 and KIOTI CK30 cab kit with hard doors and soft rear curtain p/n 1BCT230 & 1KTCK30 The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. of 2 INSTALLATION & OWNER S MANUAL KUBOTA B2650/3350 Hard Sided Cab p/n KB33AS Soft Sided Cab p/n KB33SS Installation Instructions The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. K, p. 1 of 19 INSTALLATION & OWNER S MANUAL V4210 CAB KIT (color: orange) and/or V4220 CAB KIT (color: camo) INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE GATOR HPX and/or XUV HARD SIDED CAB ENCLOSURE (p/n: 1GTR44AS) SOFT SIDED CAB ENCLOSURE (p/n: 1GTR44SS) 111 HIGGINS STREET, WORCESTER,

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. G, p. 1 of 19 INSTALLATION & OWNER S MANUAL YANMAR Sc SERIES cab kit with hard doors and soft rear curtain Curtis p/n: 1CYSC1AS Yanmar p/n: 59A40056727 Optional Hard Rear Panel Curtis p/n: SC100-06A

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS FOR E-Z-GO MPT BALL CAGE (p/n 72685-G01) The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C p. 1 of 21 INSTALLATION & OWNER S MANUAL F5205 HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner when

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. R p. 1 of 16 INSTALLATION & OWNER S MANUAL V4211 HARD SIDED CAB KIT and/or V4275 CAMO HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INDUSTRIES, LLC. INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 40 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KGL4AS) This Curtis Cab is designed and manufactured for use only as

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS FOR MASSEY FERGUSON 233, 428v (gear), 428v (hydro) SOFT SIDED CAB ENCLOSURE (p/n: MF233SS) This Curtis Cab is designed and manufactured for use

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Pg. 1 of 14 INSTALLATION & OWNER S MANUAL John Deere Gator XUV 825i S4 Cab (p/n: 1GTRXUV4 Steel Cab with Doors) The contents of this envelope are the property of the owner. Be sure to leave with the owner

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 13 INSTLLTION & OWNER S MNUL Kubota X 70 Series Cab (fits X2370, X2670, and X25D) (p/n: 1KX70S Steel Cab) (p/n: 1KX70SS Vinyl Cab) The contents of this envelope are the property of the owner. e

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL YANMAR Sc2450 cab kit with hard doors and soft rear curtain Curtis p/n: 1CYSC2450AS The contents of this envelope are the property of the owner. Be sure to leave

More information

KUBOTA BX-1500/1800/2200 HARD SIDED CAB (p/n 1KBXAS) SOFT SIDED CAB (p/n 1KBXSS)

KUBOTA BX-1500/1800/2200 HARD SIDED CAB (p/n 1KBXAS) SOFT SIDED CAB (p/n 1KBXSS) TRACTOR CAB INC. 111 HIGGINS STREET, WORCESTER, MA 01606 KUBOTA BX-1500/1800/2200 HARD SIDED CAB (p/n 1KBXAS) SOFT SIDED CAB (p/n 1KBXSS) INSTALLATION AND OWNER S MANUAL The contents of this envelope are

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS MASSEY FERGUSON THX FOR MASSEY FERGUSON 528, 53, AGCO ST28A, ST33A, CHALLENGER MT255B SOFT SIDED CAB ENCLOSURE (p/n MFTHXSS) This Curtis Cab

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS MASSEY FERGUSON TGX SERIES SOFT SIDED CAB ENCLOSURE (p/n MFTGXSS) This Curtis Cab is designed and manufactured for use only as reasonable weather

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. L, p. 1 of 18 INSTALLATION & OWNER S MANUAL KUBOTA L3200, L3800, and L2501 WorkPro Hard Sided Cab (p/n: 1KL38AS) WorkPro Soft Sided Cab (p/n: 1KL38SS) An optional Hard Rear Panel can be purchased

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. 1 of 24 INSTALLATION & OWNER S MANUAL HONDA PIONEER 700-2 ClearView Cab p/n: 1HONP7002CV This cab fits model years up thru 2016. The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 22 INSTALLATION & OWNER S MANUAL Kawasaki Mule PRO-FXT p/n s: 1KAPFXTCA & 1KAPFXTCAS1 fits all Mule Pro 6-Passenger Models Cab Shown with Optional Front Wiper, Lights, and Side View Mirrors Available

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. 1 of 24 INSTALLATION & OWNER S MANUAL HONDA PIONEER 700-4 ClearView Cab p/n: 1HONP7004CV fits model years up thru 2017 The contents of this envelope are the property of the owner. Be sure to

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. B, p. 1 of 18 INSTALLATION & OWNER S MANUAL KAWASAKI TERYX ClearView Cab p/n: 1KAWT8002CV This cab fits model years: 2014- The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 18 INSTALLATION & OWNER S MANUAL John Deere 3 Family Premium Cab p/n: 1JD3FPR Standard Cab p/n: 1JD3FST Fits Tractor Models: 3033R, 3039R, 3046R Premium Cab Shown with Optional Front LED Work

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 12 INSTALLATION & OWNER S MANUAL KAWASAKI MULE Pro FX-FXT CORNER FLASHER KIT p/n: 1KAPFXCFL Required Accessories: Fuse Panel: Kawasaki P/N: KAF080-076 Or Curtis P/N: 1KAPFXFP Approximate Installation

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. D, p. 1 of 29 INSTALLATION & OWNER S MANUAL YAMAHA VIKING YXM 700 ClearView Cab p/n: 1YAMVKCV fits model years up thru 2018 (fits Yanmar Bull model years up thru 2018) The contents of this envelope

More information

CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. CANVAS DOOR KIT P/N 2882902, 2882903 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS CLUB CAR PRECEDENT Champion and Professional Models Electric and Gasoline Models Beige (p/n 1CCP1A), Black (p/n 1CCP2A), White (p/n 1CCP3A) The

More information

POLY TIP-DOWN WINDSHIELD KIT

POLY TIP-DOWN WINDSHIELD KIT POLY TIP-DOWN WINDSHIELD KIT P/N 2883261 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

Cab Kit Installation Instructions

Cab Kit Installation Instructions Low Speed Vehicles (LSV) Electric Vehicles: Carryall Carryall 6 Cab Kit Installation Instructions Publication 050770 These instructions apply to the following kit: 0670 Edition Code 008E09D GENERAL INFORMATION

More information

(2) 10mm Quick Release Bolts with Pivot Washers (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts. (4) 10mm Plastic Washers

(2) 10mm Quick Release Bolts with Pivot Washers (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts. (4) 10mm Plastic Washers PARTS LIST: EXTREME GRILLE GUARD 1 Extreme Heavy Duty Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left Frame Mounting Bracket 4 10mm x 24mm OD x 2.2mm Flat Washers

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 30 INSTALLATION & OWNER S MANUAL John Deere 1 Family Premium Cab p/n: 1JD1FPR Standard Cab p/n: 1JD1FST Fits Tractor Models: 1023E and 1025R Premium Cab Shown with Optional Front LED Work Lights.

More information

RMK HANDLEBAR KIT P/N ; ; APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

RMK HANDLEBAR KIT P/N ; ; APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. RMK HANDLEBAR KIT P/N 2883835; 2883836; 2883837 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for.

More information

(W) INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA / SEQUOIA PART # &

(W) INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA / SEQUOIA PART # & (W) INSTALLATION INSTRUCTIONS PART # 501894 & 501895 PARTS LIST: 1 Grille Guard 4 3/8" Flat Washers 1 Driver/Left Frame 2 3/8" Nylon Lock Nuts 1 Passenger/Right Frame 4 12mm Plastic Washers 1 Driver/Left

More information

C15C C15C. Page 1 of 20

C15C C15C. Page 1 of 20 2 x Lid Front Hinge 1135 8 x M8 Bolt 8 x M8 Washer (3mm Thick) 4 x M6 Large washers 4 x M6 Spring washers 4 x M6 x 40mm Bolts 6 x M6 20mm Bolts 6 x M6 Washers 20 x Screws 2 x Lid mount gas strut bracket

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 20 INSTALLATION & OWNER S MANUAL Massey Ferguson GC1700 Series All Steel Cab p/n: 1MFGC1700AS1 Soft Side Cab p/n: 1MFGC1700SS1 Fits Tractor Models: GC1705, GC1710, GC1715, GC1720 All Steel Cab

More information

Ref Qty Part Description Part Number -1- Kit ( ) Contents:

Ref Qty Part Description Part Number -1- Kit ( ) Contents: REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 21 INSTALLATION & OWNER S MANUAL A/C Drive Kit for KUBOTA BX2670-1 and BX2680 p/n: 1ACBX2680DRK (Note: the alternator is supplied with a new pulley) Must be installed with one of the following three

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 20 INSTALLATION & OWNER S MANUAL John Deere 4 Family Premium Cab p/n: 1JD4FPR Fits Tractor Models: 4044R, 4052R, 4066R Premium Cab Shown with Optional Front Work Lights. Available Options: 1.

More information

DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. DOOR KIT P/N 2882561, 2882562 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these

More information

P/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or

P/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

INSTALLATION INSTRUCTIONS DRAWERS #240

INSTALLATION INSTRUCTIONS DRAWERS #240 INSTALLATION INSTRUCTIONS DRAWERS #240 Please read and fill out the enclosed warranty registration card to activate your warranty. SHIPMENT CONTENTS #1 Lid #2 Rear #3 Left side panel #4 Right side panel

More information

D40C HINGE # x Support Plate x M8 Bolt 8 x M8 Washer 6 x M6 20mm Bolts 6 x M6 Washers 19 x Screws

D40C HINGE # x Support Plate x M8 Bolt 8 x M8 Washer 6 x M6 20mm Bolts 6 x M6 Washers 19 x Screws HINGE # 1017 2 x Support Plate 1018 8 x M8 Bolt 8 x M8 Washer 6 x M6 20mm Bolts 6 x M6 Washers 19 x Screws 2 x Lid mount gas strut bracket 1041 2 x Self tap strut mount 1040 1 x Central Lock bracket 1510

More information

PRODUCT SAFETY NOTICE DEALER/INSTALLER NOTICE

PRODUCT SAFETY NOTICE DEALER/INSTALLER NOTICE PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance

More information

Driving Range Enclosure Kit Installation Instructions

Driving Range Enclosure Kit Installation Instructions Gasoline and Electric Vehicles: Carryall Carryall Carryall Plus Carryall 5 Carryall 6 Turf Turf Turf 5 Turf 6 XRT900 TransPorter TransPorter 6 Driving Range Enclosure Kit Installation Instructions Publication

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL V5008 Kubota RTV 72 Snow Blade The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation is complete. IMPORTANT: Please

More information

PRODUCT SAFETY NOTICE

PRODUCT SAFETY NOTICE PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance

More information

READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE.

READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE. #9378 Installation Instructions 3 Body Lift Kit 1998-2000 Ranger READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE. SAFETY WARNING BDS Suspension

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL P. 1 of 14 INSTALLATION & OWNER S MANUAL CAB INSTALLATION BEFORE YOU START HELPFUL REMINDERS: KUBOTA F-SERIES CAB p/n: F5206 The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # 2067/2067-2

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # 2067/2067-2 INSTALLATION INSTRUCTIONS 07-15 TOYOTA TUNDRA 08-15 TOYOTA SEQUOIA PART # 2067/2067-2 PARTS LIST: 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left Frame Mounting

More information

DEALER SETUP INSTRUCTION

DEALER SETUP INSTRUCTION DEALER SETUP INSTRUCTION P/N XXXXXXX APPLICATION 2018 GTS 150 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions

More information

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS MAZDA BT-50 (October 0 Production Onwards) & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Installation Time: Approx. 0 Minutes Care Instructions: Clean Tonneau Cover with a mild detergent

More information

A CAB KIT (Shown with GLASS DOORS KIT A-11859)

A CAB KIT (Shown with GLASS DOORS KIT A-11859) Cab Installation Instructions for John Deere One Series, 1023E, 1025R and 1026R Model Series A-11976 CAB KIT (Shown with GLASS DOORS KIT A-11859) FOR USE WITH OPTIONAL KITS; A-11859 GLASS DOORS WITH NON-OPENABLE

More information

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE JODALE PERRY Parts List & Mounting Instructions Jacobsen HR9016 JDP BUILT FOR LIFE Jacobsen HR9016 Mounting Instructions Standard Parts 1 - LH Rear Mounting Bracket 1 - RH Rear Mounting Bracket 1 - Front

More information

Read and understand all instructions and warnings prior to installation of product and operation of vehicle.

Read and understand all instructions and warnings prior to installation of product and operation of vehicle. #F9378 Installation Instructions 1998-2000 Ford Ranger 3" Body Lift Kit Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products

More information

TIP-OUT GLASS WINDSHIELD KIT

TIP-OUT GLASS WINDSHIELD KIT TIP-OUT GLASS WINDSHIELD KIT P/N 2881108 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

TOYOTA TUNDRA TVIP V4 REMOTE ENGINE STARTER (RES)

TOYOTA TUNDRA TVIP V4 REMOTE ENGINE STARTER (RES) Preparation Part Number: 08586-OC910 Conflicts Do not install into vehicles without RKE systems. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM Radio NOTE:

More information

VISOR AUDIO KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

VISOR AUDIO KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. VISOR AUDIO KIT P/N 2882888, 2882891 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067 INSTALLATION INSTRUCTIONS GRILLE GUARD 07-14 TOYOTA TUNDRA 08-14 TOYOTA SEQUOIA PART # P2067 PARTS LIST: GRILLE GUARD 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left

More information

MOUNTING INSTRUCTIONS JOHN DEERE GATOR NON-ROPS CAB

MOUNTING INSTRUCTIONS JOHN DEERE GATOR NON-ROPS CAB MOUNTING INSTRUCTIONS JOHN DEERE GATOR NON-ROPS CAB FITS 4X2 & 6X4 GATORS A-11112, A-11224, A-11225, A-11226 MANUFACTURED BY: BOX 70 LITCHFIELD, MINNESOTA 55355-0070 (320) 693-3221 Fax: (320) 693-7252

More information

REARVIEW MIRROR AND BACKUP CAMERA KIT

REARVIEW MIRROR AND BACKUP CAMERA KIT REARVIEW MIRROR AND BACKUP CAMERA KIT P/N 2881483 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for.

More information

INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063

INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063 INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063 PARTS LIST: 1 Grille Guard 2 10-1.5mm Nylon Lock Nuts 1 Driver/Left Frame Mounting Bracket 4 12mm Plastic Washers 1

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS NEW HOLLAND MODELS T1530 CNH Original Parts INSTALLATION INSTRUCTIONS #710660156 ALL WEATHER CAB COMPACT TRACTORS 40273809 1 CARTON CONTENTS: ALL WEATHER CAB #710660156 Key# Part# Qty. Description 1 40274

More information

H15P. Toyota Hilux A-DECK Dual Cab

H15P. Toyota Hilux A-DECK Dual Cab Toyota Hilux A-DECK Dual Cab Page 1 of 14 Fitting Instructions Part Number H15 Toyota Hilux A-DECK Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies

More information

LI-ION BATTERY UPFIT KIT

LI-ION BATTERY UPFIT KIT LI-ION BATTERY UPFIT KIT P/N 2881852 APPLICATION E2, E4, E6, and el XD BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation

More information

BX7460P Allure Tow Bar Operator Manual & Installation Instructions. ALLURE Tow Bar (10,000 lb) Pintle Coupler

BX7460P Allure Tow Bar Operator Manual & Installation Instructions. ALLURE Tow Bar (10,000 lb) Pintle Coupler Operator Manual & Installation Instructions ALLURE Tow Bar (10,000 lb) Pintle Coupler Hooking Up to Towed Vehicle 1. Position the towing vehicle on a level surface with a straight driveway ahead and engage

More information

WINCH MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL. Application WINCH KIT NO. 25-9xxx

WINCH MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL. Application WINCH KIT NO. 25-9xxx WINCH MOUNT KIT FOR POLARIS RANGER P/N 25-3370 ASSEMBLY / OWNERS MANUAL Application WINCH KIT NO. 25-9xxx Before you begin, please read these instructions and check to be sure all parts and tools are accounted

More information

2-row and All-row systems included.

2-row and All-row systems included. Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown above correspond

More information

XChange Seat Service and Maintenance Guide

XChange Seat Service and Maintenance Guide XChange Seat Service and Maintenance Guide Table Of Contents Page General Information... 1 Registration Information... 1 Seat Cushion Latch... 2 Lap Shoulder Belt Replacement... 2 Sliding Buckles Replacement...

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS PART NO. 23100T PRODUCT DESCRIPTION: Front Winch Bumper, Center Section PRODUCT SAFETY & LEGAL DISCLAIMER IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE PERSONAL

More information

REAR ROOF SPEAKER KIT

REAR ROOF SPEAKER KIT REAR ROOF SPEAKER KIT P/N 2882876 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: Accent light Kit APPLICATION: R42H (2011) PART NUMBER: 999F3 AW000 - Universal Accent Lighting Kit. KIT CONTENTS: Item QTY Description Service

More information

POLY TIP-DOWN WINDSHIELD KIT

POLY TIP-DOWN WINDSHIELD KIT POLY TIP-DOWN WINDSHIELD KIT P/N 2881919 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

SWING DOOR SOFT ENCLOSURE (part# 16733)

SWING DOOR SOFT ENCLOSURE (part# 16733) 800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Document# 19-0038 2004+ Lotus Elise (Series 2) Rear Clamshell Removal Kit Safely support the vehicle. This is a two-person job. Allow 1 to 2 hours for initial disassembly. Have

More information

2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware

2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware Owner s Manual Model: Polaris RZR * 2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware Caution: Before using this product, read this manual and follow all safety instructions. Safety Instructions

More information

SPECIALTY TOP CO. STC. INSTALLATION INSTRUCTIONS TOYOTA FAST TRAC Z TOP Toyota FJ PART #222-31X 82 1/8" 82 1/8"

SPECIALTY TOP CO. STC. INSTALLATION INSTRUCTIONS TOYOTA FAST TRAC Z TOP Toyota FJ PART #222-31X 82 1/8 82 1/8 STC INSTALLATION INSTRUCTIONS TOYOTA FAST TRAC Z TOP Toyota FJ-40 1963-1983 PART #222-31X SPECIALTY TOP CO. Thank you for purchasing Specialty's Convertible Top for your Toyota. It has been designed for

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 24 INSTALLATION & OWNER S MANUAL Kubota BX80 Cab with Heater (p/n: 1KBX80CA) fits tractor models: BX1880, 2380 & 2680 Shown with front windshield wiper (comes standard with cab) Available Options:

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 37 INSTALLATION & OWNER S MANUAL Available Options: Kubota M62 TLB Cab P/N: 1KTLBM62 M62 Cab Shown 1. Rear Closeout Panel for Operation When Backhoe is Removed (P/N: 1KTLBM62RP) 2. Optional Rear Hydraulics

More information

VOLKSWAGEN AMAROK 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

VOLKSWAGEN AMAROK 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS VOLKSWAGEN AMAROK & PIECE HARD REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Care Instructions: Clean Tonneau Cover with a mild detergent and water solution. Do not use abrasive cleaners or solvents. Place

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Electronic Tailgate Lock Kit Nissan Titan 999M2-W3005 KIT CONTENTS: Item Qty. Part Description Service Part Number A 1 Electronic

More information

Suspension System RS6582B

Suspension System RS6582B Suspension System RS6582B Tahoe/Yukon READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING: This suspension system will enhance the off-road performance

More information