Aeroquip 1817 Series Ball Bearing Swivel Joints
|
|
|
- Brandon Fitzgerald
- 6 years ago
- Views:
Transcription
1 Aeroquip 1817 Series Ball Bearing Swivel Joints
2 Table of Contents Features and Capabilities PSI Swivel Joints with Flared and Flareless Ends PSI Swivel Joints with Beam Seal Ends PSI Swivel Joints with Beam Seal Ends EATON Aerospace Group TF100-55D March 2017
3 Features and Capabilities Eaton s Aeroquip 1817 series ball bearing plane swivel joints are qualified to MIL-J-5513C for dependable 3,000 psi (20,684 kpa), 4,000 psi (27,579 kpa) and 5,000 psi (34,475 kpa) service. Eaton engineers have designed these swivel joints to provide exceptionally long trouble-free service. Design features include: Ball bearings minimize torque and maximize service life Stainless steel material minimizes envelope size and maximizes strength Titanium material reduces weight Dust seal excludes grit contamination which protects the ball bearings and seals for increased service life Less than 5 psi (34,475 kpa) pressure loss through straight configuration at rated flow Eaton s Aeroquip ball bearing plane swivel joints may be used with hose assemblies to prevent binding or twisting of the hose and to provide a flexible joint in rigid lines. These low profile swivels are available in -4*, -6, -8, -10, -12, and -16 sizes with flared, flareless and Beam Seal fitting ends. * The -4 size was subjected to 5,000,000 endurance test cycles beyond MIL-J-5513C qualification requirement for a special helicopter rotor head application. Test report is available upon request. Design Data Service: Swivel joints shown are for MIL-H-5606 and MIL-H hydraulic fluid. Swivels are available for Skydrol applications and any fluid or gas compatible with available seals. Material: Corrosion resistant steel, titanium Pressures (room temperature): Temperature Range: 65 F (-54 C) to +275 F (+132 C) Qualification: MIL-J-5513C, Type II, Class 3000 psi (sizes 4-16) Class 4000 psi (sizes 4, 6, -10, -12) Class 5000 psi (sizes 6-12) Engineering assistance is available to solve specific installation problems with special mounting provision, tube end configurations and seal combinations. The swivel joint can be designed as an integral part of a hose assembly which increases reliability by reducing the number of potential leak points. Whatever the requirements are for an 1817 series ball bearing plane swivel joint, or any other type of flexible fluid line connection, contact Eaton s Jackson, Michigan facility. Flared Ends AS4395 AS4396 Other configurations available upon request. AS4395 AS4396 Thread Thread Flareless Ends Thread Letter Size Code 1/4 E 7/ / / /8 G 9/ / / /2 H 3/4-16 3/ / /8 J 7/8-14 7/ / /4 K 1-1/ / M 1-5/ / /4-14 Beam Seal Ends Comparative Performance Data Swivel Dash Size Rated Flow (GPM) Torque (inch-lbs) MIL-J-5513C Eaton psi at room temperature Pressure (psi/kpa) Operating 3,000/20,684 4,000/27,579 5,000/34,475** Proof 4,500/31,026 6,000/41,370 7,500/51,711 Min Burst 7,500/51,711 10,000/68,948 12,500/86,184 ** Class 5,000 available on request. Please contact Eaton s Aerospace Group in Jackson, Michigan. EATON Aerospace Group TF100-55D March
4 Class 3000 psi Swivel Joints Flared/Flareless Ends Part numbers shown are for MIL-H hydraulic fluid. AS4395 AS4396 AS AE81511E 2.07/ / / / /.05-6 AE81511G 2.23/ / / / /.09-8 AE81511H 2.55/ / / / / AE81511J 2.94/ /36.758/ / / AE81511K 3.98/ / / / / AE81511M 3.60/ / / / /.49 SKYDROL Equivalent Part Number: AE77870 (E - M size) Size Number Ref Ref ±.032 Max (lbs/kg) -4 AE81512E 2.57/ / / / /.06-6 AE81512G 2.80/ / / / /.10-8 AE81512H 3.18/ / / / / AE81512J 3.60/ / / / / AE81512K 4.01/ / / / / AE81512M 4.28/ / / / /30.7 SKYDROL Equivalent Part Number: AE77871 (E - M size) Size Number Ref Ref ±.010 Max (lbs/kg) -4 AE81507E 1.87/ / / / /2.7-6 AE81507G 2.06/ / / / /4.5-8 AE81507H 2.36/ / / / / AE81507J 2.67/ /36.625/ / / AE81507K 2.93/ / / / / AE81507M 3.16/ / / / /24.8 SKYDROL Equivalent Part Number: AE86056 (E - M size) Size Number Ref Ref ±.032 Max (lbs/kg) -4 AE81508E 2.39/ / / / /3-6 AE81508G 2.61/ / / / /5-8 AE81508H 2.96/ / / / / AE81508J 3.34/ / / / / AE81508K 3.64/ / / / /20-16 AE81508M 3.87/ / / / /27.9 SKYDROL Equivalent Part Number: AE82273 (E - M size) 4 EATON Aerospace Group TF100-55D March 2017
5 Class 3000 psi Swivel Joints Flared/Flareless Ends Part numbers shown are for MIL-H hydraulic fluid. AS4395 AS4396 AS4396 AS AE81513E 1.55/ / / / /.09-6 AE81513G 1.72/ / / / /.14-8 AE81513H 1.97/ / / / / AE81513J 2.21/ / / / / AE81513K 2.48/ / / / / AE81513M 2.61/ / / / /.92 SKYDROL Equivalent Part Number: AE77872 (E - M size) Size Number Ref Ref ±.032 Max (lbs/kg) -4 AE81514E.99/ / / / /.09-6 AE81514G 1.09/ / / / /.14-8 AE81514H 1.26/ / / / / AE81514J 1.45/ / / / / AE81514K 1.66/ / / / / AE81514M 2.57/ / / / /.92 SKYDROL Equivalent Part Number: AE77873 (E - M size) Size Number Ref Ref ±.010 Max (lbs/kg) -4 AE81509E 1.47/ / / / /.07-6 AE81509G 1.61/ / / / /.13-8 AE81509H 1.85/ / / / / AE81509J 2.09/ / / / / AE81509K 2.30/ / / / / AE81509M 2.43/ / / / /.87 SKYDROL Equivalent Part Number: AE82274 (E - M size) *NOTE: Order AE83244 (E-M) for on both ends. Size Number Ref Ref ±.032 Max (lbs/kg) -4 AE81510E.89/ / / / /.08-6 AE81510G 1.00/ / / / /.13-8 AE81510H 1.16/ / / / / AE81510J 1.32/ / / / / AE81510K 1.48/ / / / / AE81510M 1.61/ / / / /.87 SKYDROL Equivalent Part Number: AE84207 (E - M size) EATON Aerospace Group TF100-55D March
6 Class 3000 psi Swivel Joints Beam Seal Part numbers shown are for MIL-H hydraulic fluid. Contact Eaton for Skydrol application part numbers. Size Number Ref Ref ±.015 Max (lbs/kg) -4 AE81515E 1.52/ / /6.9.88/ /.05-6 AE81515G 1.71/ / /7.4.90/ /.08-8 AE81515H 1.86/ / / / / AE81515J 2.16/ /36.372/ / / AE81515K 2.37/ / / / / AE81515M 2.70/ / / / /.25.1 Size Number Ref Ref ±.032 Max (lbs/kg) -4 AE81516E 1.92/ / / / /.05-6 AE81516G 2.14/ / / / /.09-8 AE81516H 2.30/ / / / / AE81516J 2.69/ /35.894/ / / AE81516K 2.95/ / / / / AE81516M 3.32/ / / / /.49 Electroless nickel on bolt (not qualified) -4 Dynatube only. Size Number Ref Ref ±.015 Max (lbs/kg) -4 AE81517E 1.12/ / /6.9.88/ /4.5-6 AE81517G 1.25/ / /7.4.90/ /7.3-8 AE81517H 1.35/ / / / / AE81517J 1.59/ / / / / AE81517K 1.79/ / / / / AE81517M 2.01/ / / / /48.5 Size Number Ref Ref ±.015 Max (lbs/kg) -4 AE81518E.71/ / / / /4.5-6 AE81518G.83/ / / / /7.3-8 AE81518H.90/ / / / / AE81518J 1.07/ / / / / AE81518K 1.21/ / / / / AE81518M 1.39/ / / / / EATON Aerospace Group TF100-55D March 2017
7 Class 4000 psi Swivel Joints Beam Seal Part numbers shown are for MIL-H hydraulic fluid. Contact Eaton for Skydrol application part numbers. -4* AE73704E 1.52/ / / / /.04-6 AE73704G 1.72/ / / / /.06-8 AE73704H 1.87/ / / /.30.22/ AE73704J 2.17/ /36.372/ / / AE73704K 2.39/ / / / / AE73704M 2.71/ / / / /.31-4 AE73705E 1.92/ / / / /.05-6 AE73705G 2.14/ / / / /.07-8 AE73705H 2.31/ / / /30.26/ AE73705J 2.69/ /36.894/ / / AE73705K 2.97/ / / / / AE73705M 3.33/ / / / /.37 *Electroless nickel on bolt (not qualified) -4 Beam Seal only. -4 AE73707E 1.12/ / / / /.06-6 AE73707G 1.25/ / / / /.10-8 AE73707H 1.35/ / / /30.37/17-10 AE73707J 1.59/ / / / /24-12 AE73707K 1.79/ / / / / AE73707M 2.01/ / / / /.66-4 AE73706E.71/ / / / /.06-6 AE73706G.83/ / / / /.10-8 AE73706H.90/ / / /30.37/ AE73706J 1.07/ / / / / AE73706J 1.21/ / / / / AE73706J 1.39/ / / / /.66 EATON Aerospace Group TF100-55D March
8 Eaton Aerospace Group Fluid & Electrical Distribution Division 300 South East Avenue Jackson, Michigan Phone: (517) Fax: (517) Eaton Aerospace Group 9650 Jeronimo Road Irvine, California Phone: (949) Fax: (949) Copyright 2014 Eaton All Rights Reserved Copying or Editing is Forbidden Form No. TF100-55D (Supersedes AA70 & APN-2) March 2017
Aeroquip Series 1965 & 2055 Low Profile Push-Pull Quick Disconnect Couplings
f Aeroquip Series 1965 & 2055 Low Profile Push-Pull Quick Disconnect Couplings Speeds Maintenance and Provides Safety and Reliability for Aircraft Hydraulic and Coolant Systems Series 1965 & 2055 Quick
Aeroquip Series 1800 & 1801 Low Profile Ratchet Lock Couplings. Lightweight Self-Sealing Compact Design Minimum Pressure Loss
Aeroquip Series 1800 & 1801 Low Profile Ratchet Lock s Lightweight Self-Sealing Compact Design Minimum Pressure Loss Aeroquip Low Profile Ratchet Lock s, Caps and Plugs 1800 and 1801 Series Lightweight,
Aeroquip Low Profile Self Sealing Couplings. Series 2000 Series 2001
Aeroquip Low Profile Self Sealing Couplings Series 2000 Series 2001 Low Profile Self Sealing Couplings 2000 and 2001 Opposed Poppet Series 2000 Series Couplings Qualified to Type I, Class A and Type II,
Aeroquip Ultra-Mate Couplings
Aeroquip Ultra-Mate Couplings The Ultimate in Push-Pull Couplings Self-Seal, Self-Locking Couplings Automatic Pull-Home Valve Sleeve Tactile Locking Pins Vacuum to 5000 psi Patent 6,557,824 2 EATON Aerospace
Aeroquip 145/155 Series Hydraulic Self Sealing Coupling
Aeroquip 145/155 Series Hydraulic Self Sealing Coupling Fully interchangeable with all fielded Eaton's Aeroquip 145/155 Series Couplings and is the only approved coupling to SAE AS5440 Table of Contents
Aeroquip Sure-Mate Couplings
Aeroquip Sure-Mate Couplings Positive locking fingers Blunt start ACME threads for easy connection Lighter weight compared to previous thread-together couplings Low pressure drop across the connector Minimal
Aeroquip Sure-Mate Couplings
Aeroquip Sure-Mate Couplings Positive locking fingers Blunt start ACME threads for easy connection Lighter weight compared to previous thread-together couplings Low pressure drop across the connector Minimal
Fluid Conveyance. Ultra Low Pressure Drops Leak-free Metal to Metal Sealing Withstands Large Range of Temperatures Long Life
TF100-18 Aeroquip Brand Aerocheck Hydraulic Directional Control Valves Ultra Low Pressure Drops Leak-free Metal to Metal Sealing Withstands Large Range of Temperatures Long Life Patent Pending Table of
Aeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
Aeroquip Brand 145/155 Series Hydraulic Self Sealing Coupling
Aeroquip Brand 145/155 Series Hydraulic Self Sealing Coupling Fully interchangeable with all fielded 's Aeroquip brand 145/155 Series Couplings and is the only approved coupling to SAE AS5440 Table of
Aerospace. Aeroquip Brand Ultra-Mate Couplings. Patent 6,557,824
Aerospace Aeroquip Brand Ultra-Mate Couplings The Ultimate in Push-Pull Couplings Self-Seal, Self-Locking Couplings Automatic Pull-Home Valve Sleeve Tactile Locking Pins Vacuum to 5000 psi Patent 6,557,824
Aeroquip 3200 Series Self-Sealing Quick Disconnect
Aeroquip 3200 Series Self-Sealing Quick Disconnect 3200 Series Quick Disconnect Eaton s Aeroquip Brand 3200 Series Self-Sealing Coupling is a reliable quick disconnect for 3000 psi (2068.42 kpa) aircraft
Aeroquip 3,000 psi Teflon Hose and Hose Assemblies
Aeroquip 3,000 psi Teflon Hose and Hose Assemblies Lightweight Meets performance requirements of AS1339 50% tighter bend radius Improved flexing characteristics Weight savings Table of Contents 3 AE246
Internal Roller Swage Tooling & Equipment
Internal Roller Swage Tooling & Equipment Table of Contents Roller Swage Machines... 1-2 Tube Expanders... 3 Jaw Sets... 4 Roller Swage Assemblies & Components... 5 Installation Sequence... 6 Roller Swage
Rubber Hose, Fittings & Assemblies for Aerospace Applications
Aeroquip Rubber Hose, Fittings & Assemblies for Aerospace Applications Lightweight and Flexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, Fittings and Assemblies 1 303, 302A
Wire Reinforced Synthetic Rubber Hose Assemblies
Aeroquip Wire Reinforced Synthetic Rubber Hose Assemblies Lightweight and Flexible Qualified to Industry Standards Integral Abrasion and Fire Resistance Covers Available Aeroquip Wire Reinforced Synthetic
Aerospace Parts Catalogue 2
Werthenbach Aerospace GmbH Page 1 Table of Content 1. Quick Disconnect s... 3 1.1. APPLICATION GUIDE... 4 1.1.1. AEROQUIP SERIES 145/155 SERIES HYDRAULIC SELF SEALING COUPLINGS... 4 1.1.2. AEROQUIP SERIES
Convoluted Teflon Hose
eroquip E645 Nomex Reinforced onvoluted Teflon Hose Lightweight Meets performance requirements of S1227 50% tighter bend radius Improved flexing characteristics Table of ontents Weight omparison 3 E645
Rubber Hose, Fittings & Assemblies for Aerospace Applications
Aeroquip Brand Rubber Hose, Fittings & Assemblies for Aerospace Applications Light Weight and Flexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, Fittings and Assemblies 1
AA w -tugq0 173 AEROSPACE ENGINEERING BULLETIN. KEVLAR Reinforced High Pressure Teflon Hose Assemblies
DO ( AA w -tugq0 173 AEROSPACE ENGINEERING BULLETIN * A o 1 i: :00 KEVLAR Reinforced High Pressure Teflon Hose Assemblies... ~~~~~~~~~~~~~~~~~~~~~~ M -L. * * Light Weight * Integral Abrasion Resistance
Aeroquip TEB 169. Hose Shop. Assembly Equipment. & Price List
Aeroquip TEB 169 Hose Shop Assembly Equipment & Price List Table of Contents Section I Hose Assembly Equipment Electrical Options 1 Hose Assembly Equipment Options 2-7 Option 1 (Basic) 2-3 Option 2 (Intermediate)
LJ11 and J11 Joints. LJ11 and J11 Joint Specifications and Dimensions. T-bolt Latch Coupling. Joint
LJ11 and J11 Joints LJ11 and J11 Joints LJ11 and J11 Joints were designed primarily to join standard tubing for fuel, hot air and gas systems. The substitution of couplings other than the coupling part
Kevlar Reinforced High Pressure PTFE Hose Assemblies AE319, AE334, AE355
eroquip evlar Reinforced High Pressure PTFE Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000, 4000
Fluid Conveyance. Aeroquip Brand Rynglok Tube Repair System
Aeroquip Brand Rynglok Tube Repair System The proven tube fitting performance standard The system of choice for aerospace hydraulic tubing repair Approved by Boeing, Airbus, major airlines, and all branches
Carter Underwing Refueling Nozzle. Model 64349
Carter Underwing Refueling Nozzle Model 64349 Design Concepts Eaton s Carter product line is the leading manufacturer of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). Eaton s Carter Model
Aerospace Fluid Conveyance
Aerospace Aeroquip Brand Bleed Air Ducting Components Capabilities Eaton Aerospace products are designed, engineered and manufactured to the strictest quality standards in the industry... our own. Computer
Carter Pressure Fueling Nozzle Model 64200
Carter Pressure Fueling Nozzle Model 64200 Design Concepts Eaton s Carter product line of ground fueling equipment includes several underwing refueling nozzle models. Building on the success of earlier
Carter Ground Fueling Underwing Refueling Nozzle Model 64349
Carter Ground Fueling Underwing Refueling Nozzle Model 64349 Design Concepts s Carter brand is the leading manufacturer of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). Model 64349H underwing
Aerospace Fluid Conveyance
Aerospace LJ11 and J11 Joints LJ11 and J11 Joints LJ11 and J11 Joints were designed primarily to join standard tubing for fuel, hot air and gas systems. The substitution of couplings other than the coupling
Aerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Aeroquip Brand Rubber Hose, ittings & Assemblies for Aerospace Applications Light Weight and lexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, ittings and Assemblies
Carter Ground Fueling Underwing Refueling Nozzle Model 64250
Carter Ground Fueling Underwing Refueling Nozzle Model 6450 Design Concepts s Carter brand offers several standard underwing nozzles. Until recently, the latest technology has been Model 6400 pressure
Carter Ground Fueling Pressure Refueling Nozzle Model 64348
Carter Ground Fueling Pressure Refueling Nozzle Model 6448 Design Concepts s Carter Model 6448 underwing fueling nozzle has been used world-wide in the aircraft fueling industry for many years. It includes
Carter Pressure Loss Compensator and Venturis. Model Model Model Model Model 64086
Carter Pressure Loss Compensator and Venturis Model 60559 Model 64088 Model 64085 Model 64193 Model 64086 esign Concepts Eaton s Carter product line includes Model 60559 Pressure Loss Compensator and a
Non-Valved Unisex Coupling
SM64019 October 2010 Aerospace Group Conveyance Systems Division Applicable additional manuals: None Carter Brand Ground Fueling Equipment Maintenance Manual Non-Valved Unisex Coupling Model 64019 Model
Carter Ground Fueling Underwing Refueling Nozzle Model 60427
Carter Ground Fueling Underwing Refueling Nozzle Model 60427 Design Concepts Eaton s Carter brand Model 60427 underwing nozzle is utilized world-wide by more companies and at more airports than any other
Carter Underwing Refueling Nozzle Model 60427
Carter Underwing Refueling Nozzle Model 60427 Design Concepts Eaton s Carter Model 60427 Underwing Refueling Nozzle is utilized worldwide by more companies and at more airports than any other nozzle. Tens
Aerospace Kevlar Reinforced High Pressure Teflon Hose Assemblies AE319, AE334, AE355
erospace evlar Reinforced High Pressure Teflon Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000,
Carter Ground Fueling Pressure Refueling Nozzle Model 64348
Carter Ground Fueling Pressure Refueling Nozzle Model 64348 Design Concepts Eaton s Carter Model 64348 underwing fueling nozzle has been used world-wide in the aircraft fueling industry for many years.
R270 (510 SERIES): TITEFLEX R270 (510 SERIES) ENGLISH
TITEFLEX R270 (510 SERIES) SERI ES: 510 SPECIFICATION: None BRAID: Nomex INNERCORE: PTFE Convoluted QUALIFICATIONS : Qualified specific requirements. R270 (510 SERIES): 510 Series: low-pressure PTFE hose
DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II
INCH-POUND 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II This specification is approved for use
Aerospace Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant
Aerospace Standard Tube Size and Variable Diameter V-Band Couplings Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant V-Band Couplings Standard Tube Size and Variable Diameter
BRAIDED HOSE WT/1/ HOSE OD (MAX)
TITEFLEX RA170 (220 SERIES) SERI ES: 220 SPECIFICATION: SAE AS1975, Class 3000 BRAID: Kevlar INNERCORE: PTFE Smoothbore QUALIFICATIONS : SAE AS1975, Class 3000 TSO-C75 Type II-S/P TSO-C75 Type IIB-S/P
Swivel Joints Flexmaster Joints BD BD BD BD BD BD
FLUID CONVEYING PRODUCTS Section Pages Hose 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Description Page How to Order 230 Selection Criteria 231 Selection Chart 232 Fluid Compatibility Chart
SM64052 Maintenance & Repair Manual Commercial 2" Unisex Coupling - Valved Model 64052
Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment SM64052 July 2004 Applicable additional manuals: SM64051 Commercial 2" Unisex Coupling, Non-Valved Maintenance & Repair
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
EXTERNALLY SWAGED FITTING
EXTERNALLY SWAGED FITTING DESIGN CONCEPT The Externally Swaged fitting was originally developed by McDonnell Douglas (prior to become Boeing) who granted the manufacturing authority to Airdrome Precision
Swivel Quick Disconnect To Mate Various Carter Brand Nozzles. Model SM Maintenance & Repair Manual
Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment SM44315 February 1998 Applicable additional manuals: SM61428 Nozzle SM64348 Nozzle SM64200 Nozzle Maintenance & Repair
TEST EQUIPMENT FOR RAM-AIR TURBINES
TEST EQUIPMENT FOR RAM-AIR TURBINES HYDRAULICS TEST EQUIPMENT RAT >PGRAT1< GROUND CHECK MOTOR RAT >RATMK< RAT SAFETY INTERFACE KIT >RSIK1< AIRBUS CERTIFIED > Originally designed for - A318, - A319, - A320
Unisex Couplings, Valved. Model Model SM October Applicable additional manuals: None. Maintenance Manual
SM64020 October 2010 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable additional manuals: None Maintenance Manual Unisex Couplings, Valved Model 64020 Model
Maintenance Manual. Dry Break Quick Disconnect (Old Style) Model SM November 1, 2011 Applicable additional manuals: SM60427 Nozzle
Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment SM60672-1 November 1, 2011 Applicable additional manuals: SM60427 Nozzle Maintenance Manual Dry Break Quick Disconnect
Boeing F/A-18E/F Super Hornet & EA-18G Growler
Boeing F/A-18E/F Super Hornet & EA-18G Growler Boeing F/A-18E/F Super Hornet and EA-18G Growler Eaton s Aerospace Group Product Capabilities The multi-mission F/A-18E/F Super Hornet is an evolutionary
[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986
![[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986](/thumbs/90/102223285.jpg "[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986")
[INCH-POUND] 30 December 1999 SUPERSEDING MIL-C-4109F 31 October 1986 COMMERCIAL ITEM DESCRIPTION COUPLING HALVES, QUICK-DISCONNECT The General Services Administration has authorized the use of this commercial
Quick Disconnect To Mate Nozzle. Model SM40679 August Applicable additional manuals: SM60427 Nozzle SM Hose End Regulator
SM40679 August 2009 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable additional manuals: SM60427 Nozzle SM60129-1 Hose End Regulator Maintenance Manual Quick
Air Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: psi
R SPX Division 655 Eisenhower Drive Owatonna MN 55060 Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223
Bottom Loading & Recirculation Adapters
SM60373 January 2002 Aerospace Group Conveyance Systems Division Carter Brand Ground Fuelin Equipment Applicable additional manuals: None Maintenance Manual Bottom Loading & Recirculation Adapters Models
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
Air Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: psi
Form No. 545742 Parts List and Operating Instructions for: 4313C 4321C Air Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: 40 150 psi 45 44 43 42 41 40 39 22 1 37 28
23 SERIES INDUSTRIAL DRY BREAK COUPLINGS. Featuring Snap-tite quality with superior pressure and flow characteristics over the competition
INDUSTRIAL DRY BREAK COUPLINGS SERIES Featuring Snap-tite quality with superior pressure and flow characteristics over the competition Rugged construction High strength steel with Zinc Trivalent Chromate
Centurion Mechanical Seals
Centurion Mechanical Seals Centurion Mechanical Seals The Advantages of Choice Eaton offers the most diverse line of mechanical seals and sealing components, including pressure-balanced face seals, circumferential
JIG Inspectors Workshop. Teddington September
JIG Inspectors Workshop Teddington September 28 2012 Title of Presentation Here Nic Mason Technical Services Manager Q8 Aviation 2 Equipment Qualification Aircraft fuelling nozzles and hose end regulators
UNITED STATES DEPARTMENT OF AGRICULTURE FOREST SERVICE STANDARD FOR SPARK ARRESTERS FOR INTERNAL COMBUSTION ENGINES
Standard 00-c September Superseding 00-b July UNITED STATES DEPARTMENT OF AGRICULTURE FOREST SERVICE STANDARD FOR SPARK ARRESTERS FOR INTERNAL COMBUSTION ENGINES. SCOPE... Scope. This standard establishes
Check valves are for the prevention of backflow. Particular check valves perform additional services as follows:
KENNEDY VALVE Division of McWane, Inc. 1021 East Water Street P.O. Box 931 Elmira, New York 14902-0931 Telephone (607) 734-2211 Fax (607) 734-1003 KENNEDY VALVE RESILIENT SWING CHECK MAINTENANCE MANUAL
SM64155 Maintenance & Repair Manual
SM64155 September 2011 Applicable addition manuals: Aerospace Group Conveyance Systems Division Carter Brand SM61429 Nozzle SM64349 Nozzle SM64201 Nozzle Maintenance & Repair Manual Continuity Dry Break
SEASPRITE. SH-2G Super MODERN MARITIME SOLUTION
SEASPRITE SH-2G Super MODERN MARITIME SOLUTION Flexible The Kaman SH-2G Super Seasprite is the ideal multimission maritime helicopter. From anti-submarine warfare, to anti-surface warfare, over-the-horizon
STYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
STYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation, and maintenance.
Boeing F/A-18E/F Super Hornet & EA-18G Growler
Boeing F/A-18E/F Super Hornet & EA-18G Growler Boeing F/A-18E/F Super Hornet and EA-18G Growler Eaton s Aerospace Product Capabilities Overview The multi-mission F/A- 18E/F Super Hornet is an evolutionary
Champ MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
Air / Hydraulic Under Axle Jack
655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223
No January, Char-Lynn. Power Steering. Parts Information. 3, 4, 6, and 12 Series Steering Contol Units
Char-Lynn Power Steering No. 6-317 January, 1998 Parts Information Steering Contol Units 001 002 Cap Screws 12 Pt. Drive No. 5389-, Spacer Plate 7970, and End Cap, 8438 (21888 Series 4) are -001 Parts.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com
DODGE CHARGER, CHALLENGER, MAGNUM (05-08), CHRYSLER L HEMI (FOR OFF-ROAD RACING USE ONLY)
LEGALITY NOTES These exhaust headers DO NOT comply with California Air Resource Board regulations and are NOT LEGAL for sale or use on pollution controlled vehicles in the state of California. These headers
Installation, Operation & Service Manual. PPL Bag Filter Housings. Table of Contents Page No. Eaton Filtration, LLC
Installation, Operation & Service Manual PPL Bag Filter Housings Eaton Filtration, LLC 900 Fairmount Avenue, Elizabeth, NJ 07207 Read all instructions before installation or operation of equipment. Failure
INSTRUCTION MANUAL with. ILLUSTRATED PARTS LIST for TRAILER ASSEMBLY. with HANDLE ACTUATED FRONT BRAKES
TO-241 5/5/97 INSTRUCTION MANUAL with ILLUSTRATED PARTS LIST for TRAILER ASSEMBLY with HANDLE ACTUATED FRONT BRAKES Manufactured By HOBART BROTHERS COMPANY GROUND POWER DIVISION TROY, OHIO 45373 U.S.A.
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
LD Series Electronic Meters
LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior
CHARACTERISTIC SPECIFICATION
MICRO-D SERIES Microminiature connectors with solder bucket termination ESCC 3401/029 Features and Benefits Compliant with ESA specifications High performance Micropin contact system ( twist pin spring
THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A GASOLINE ENGINE.
NUMBER: 14-002-01 GROUP: Fuel DATE: Mar. 16, 2001 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in
Additions, Revisions, or Updates
2 27-14 1 2 27-14 SUBJECT DATE SPN 4335/FMI 7 - EPA10 February 2014 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0084 DD Platform SPN 4335/FMI 7
Standard Package Systems Product Focus. Now, More Choices In Vickers Power Unit Offerings. Whatever the Industry. Whatever the Application.
Standard Package Systems Product Focus Now, More Choices In Vickers Power Unit Offerings. Whatever the Industry. Whatever the Application. The industry's fastest way to buy power units with the most flexible
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-24236/24E 5 April 2006 SUPERSEDING MIL-PRF-24236/24D 22 January 2001 PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), SUBMINIATURE, TYPE I, HERMETICALLY SEALED,
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
Shell & Tube Heat Exchangers
Shell & Tube Heat Exchangers CUSTOM ENGINEERED SERIES: CENTURY PRODUC Shell & Tube Heat Exchangers As the recognized leader in heat exchanger products, systems and technology, Standard Xchange has been
ADJUSTABLE AIR PRESS
ADJUSTABLE AIR PRESS MODELS 12-A, 28-A, 50-A INSTALLATION, OPERATING, and MAINTENANCE INSTRUCTIONS Black & Webster Assembly Equipment Division 545 Hupp Ave. P.O. Box 831 Jackson, Michigan 49204 Phone:
A N Fittings versus JI C Fittings
A N Fittings versus JI C Fittings A N Fittings : AN fittings are a flare fitting, using 37 flared tubing to form a metal-metal seal. The A N thread is a particular type of fitting used to connect flexible
Spray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
M&H VALVE RESILIENT SWING CHECK MAINTENANCE MANUAL
M&H Valve Co. Division of McWANE, Inc. 605 West 23 rd Street P.O. Box 2088 Anniston, AL 36202 Telephone (256) 237-3521 Fax (888) 549-5309 M&H VALVE RESILIENT SWING CHECK MAINTENANCE MANUAL I. SELECTION
AUXILIARY COMPONENTS
CHAPTER 9 AUXILIARY COMPONENTS Fluid Power Circuits and Controls, John S.Cundiff, 2001 INTRODUCTION Discussion of the hardware needed to connect the various components (pumps, actuators, valves, accumulators,
Gyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Data Charts DESIGN HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities.
Maintenance & Repair Manual. Misc. Male Adapters To Mate Model Nozzles And Model Couplers. SM427MISC June 1, 1993
SM427MISC June 1, 1993 Aerospace Group Conveyance Systems Divison Carter Brand Ground Fueling Equipment Applicable addition manuals: SM60427 Nozzle SM61445 Coupler SM40679 Quick Disconnect Maintenance
Portable Two-Stage Under Axle Jack Max. Capacity: First Stage: 27.5 Tons Second Stage: 11 Tons. Safety Precautions
SPX Corporation Eisenhower Drive Owatonna, MN 00-0 USA Phone: (07) -7000 Tech. Serv.: (00) -7 Fax: (00) - Order Entry: (00) -7 Fax: (00) - International Sales: (07) -7 Fax: (07) -70 Form No. Parts List
DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
AE40 CATALOG D38999 CYLINDRICAL CONNECTORS FOR PCB APPLICATIONS
AE40 CATALOG D38999 CYLINDRICAL CONNECTORS FOR PCB APPLICATIONS 9452 De Soto Avenue I Chatsworth, CA 91313-2231 I Voice: 818.407.5400 I Toll Free: 800.458.4412 I Fax: 818.407.5460 I email: sales@airelectro.com
Beyond the Hype. What does the journey to metal AM production really look like? Adam Rivard
Beyond the Hype What does the journey to metal AM production really look like? August 2016 Adam Rivard ARivard@LAIco.com 207-756-5544 Beyond the Hype: How to get there? The Best Machine Control Integrate
Model Maintenance Manual SM July 2011
SM61154 July 2011 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Applicable addition manuals: SM61428 Nozzle SM60427 Nozzle SM64348 Nozzle SM64349 Nozzle SM64200 Nozzle SM64201
Spray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
MONITORS DESCRIPTION. Grease fitting for lubrication
MONITORS DESCRIPTION Chemguard gear driven monitors are constructed of corrosion resistant brass. These units are of rugged construction making them ideally suited for harsh environments such as marine
liquid Pumps Air driven contents Chatsworth, California, USA LP500C
LP5C Air driven liquid Pumps contents Principle of Operation, Features, Why Use Air Driven Pumps...2 Typical Applications...3 Model Selection Table...4 Type of Materials in Contact with Fluid, Liquid Compatibility
2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space
STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2
Installation, Operation and Maintenance of Airflex Model AA2, B2, B3 and C2 Rotorseals
RS 9010 Warning Forward this manual to the person responsible for Installation, Operation and Maintenance of the product described herein. Without access to this information, faulty Installation, Operation
Back Pressure Regulator
Instruction Sheet P/N 108652H Description The Nordson back pressure regulator is a spring-loaded, hand-operated fluid pressure regulator designed for use with general liquid coating materials. The regulator